Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 415 insertions, 0 deletions

diff --git a/drivers/net/ethernet/xilinx/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
new file mode 100644
index 0000000000..90d122d547
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/ll_temac.h
@@ -0,0 +1,415 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef XILINX_LL_TEMAC_H
+#define XILINX_LL_TEMAC_H
+
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_PPC_DCR
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#endif
+
+/* packet size info */
+#define XTE_HDR_SIZE			14      /* size of Ethernet header */
+#define XTE_TRL_SIZE			4       /* size of Ethernet trailer (FCS) */
+#define XTE_JUMBO_MTU			9000
+#define XTE_MAX_JUMBO_FRAME_SIZE	(XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE)
+
+/*  Configuration options */
+
+/*  Accept all incoming packets.
+ *  This option defaults to disabled (cleared)
+ */
+#define XTE_OPTION_PROMISC                      (1 << 0)
+/*  Jumbo frame support for Tx & Rx.
+ *  This option defaults to disabled (cleared)
+ */
+#define XTE_OPTION_JUMBO                        (1 << 1)
+/*  VLAN Rx & Tx frame support.
+ *  This option defaults to disabled (cleared)
+ */
+#define XTE_OPTION_VLAN                         (1 << 2)
+/*  Enable recognition of flow control frames on Rx
+ *  This option defaults to enabled (set)
+ */
+#define XTE_OPTION_FLOW_CONTROL                 (1 << 4)
+/*  Strip FCS and PAD from incoming frames.
+ *  Note: PAD from VLAN frames is not stripped.
+ *  This option defaults to disabled (set)
+ */
+#define XTE_OPTION_FCS_STRIP                    (1 << 5)
+/*  Generate FCS field and add PAD automatically for outgoing frames.
+ *  This option defaults to enabled (set)
+ */
+#define XTE_OPTION_FCS_INSERT                   (1 << 6)
+/*  Enable Length/Type error checking for incoming frames. When this option is
+ *  set, the MAC will filter frames that have a mismatched type/length field
+ *  and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
+ *  types of frames are encountered. When this option is cleared, the MAC will
+ *  allow these types of frames to be received.
+ *  This option defaults to enabled (set)
+ */
+#define XTE_OPTION_LENTYPE_ERR                  (1 << 7)
+/*  Enable the transmitter.
+ *  This option defaults to enabled (set)
+ */
+#define XTE_OPTION_TXEN                         (1 << 11)
+/*  Enable the receiver
+ *  This option defaults to enabled (set)
+ */
+#define XTE_OPTION_RXEN                         (1 << 12)
+
+/*  Default options set when device is initialized or reset */
+#define XTE_OPTION_DEFAULTS                     \
+	(XTE_OPTION_TXEN |                          \
+	 XTE_OPTION_FLOW_CONTROL |                  \
+	 XTE_OPTION_RXEN)
+
+/* XPS_LL_TEMAC SDMA registers definition */
+
+#define TX_NXTDESC_PTR      0x00            /* r */
+#define TX_CURBUF_ADDR      0x01            /* r */
+#define TX_CURBUF_LENGTH    0x02            /* r */
+#define TX_CURDESC_PTR      0x03            /* rw */
+#define TX_TAILDESC_PTR     0x04            /* rw */
+#define TX_CHNL_CTRL        0x05            /* rw */
+/*
+ *  0:7      24:31       IRQTimeout
+ *  8:15     16:23       IRQCount
+ *  16:20    11:15       Reserved
+ *  21       10          0
+ *  22       9           UseIntOnEnd
+ *  23       8           LdIRQCnt
+ *  24       7           IRQEn
+ *  25:28    3:6         Reserved
+ *  29       2           IrqErrEn
+ *  30       1           IrqDlyEn
+ *  31       0           IrqCoalEn
+ */
+#define CHNL_CTRL_IRQ_IOE       (1 << 9)
+#define CHNL_CTRL_IRQ_EN        (1 << 7)
+#define CHNL_CTRL_IRQ_ERR_EN    (1 << 2)
+#define CHNL_CTRL_IRQ_DLY_EN    (1 << 1)
+#define CHNL_CTRL_IRQ_COAL_EN   (1 << 0)
+#define TX_IRQ_REG          0x06            /* rw */
+/*
+ *  0:7      24:31       DltTmrValue
+ *  8:15     16:23       ClscCntrValue
+ *  16:17    14:15       Reserved
+ *  18:21    10:13       ClscCnt
+ *  22:23    8:9         DlyCnt
+ *  24:28    3::7        Reserved
+ *  29       2           ErrIrq
+ *  30       1           DlyIrq
+ *  31       0           CoalIrq
+ */
+#define TX_CHNL_STS         0x07            /* r */
+/*
+ *  0:9      22:31   Reserved
+ *  10       21      TailPErr
+ *  11       20      CmpErr
+ *  12       19      AddrErr
+ *  13       18      NxtPErr
+ *  14       17      CurPErr
+ *  15       16      BsyWr
+ *  16:23    8:15    Reserved
+ *  24       7       Error
+ *  25       6       IOE
+ *  26       5       SOE
+ *  27       4       Cmplt
+ *  28       3       SOP
+ *  29       2       EOP
+ *  30       1       EngBusy
+ *  31       0       Reserved
+ */
+
+#define RX_NXTDESC_PTR      0x08            /* r */
+#define RX_CURBUF_ADDR      0x09            /* r */
+#define RX_CURBUF_LENGTH    0x0a            /* r */
+#define RX_CURDESC_PTR      0x0b            /* rw */
+#define RX_TAILDESC_PTR     0x0c            /* rw */
+#define RX_CHNL_CTRL        0x0d            /* rw */
+/*
+ *  0:7      24:31       IRQTimeout
+ *  8:15     16:23       IRQCount
+ *  16:20    11:15       Reserved
+ *  21       10          0
+ *  22       9           UseIntOnEnd
+ *  23       8           LdIRQCnt
+ *  24       7           IRQEn
+ *  25:28    3:6         Reserved
+ *  29       2           IrqErrEn
+ *  30       1           IrqDlyEn
+ *  31       0           IrqCoalEn
+ */
+#define RX_IRQ_REG          0x0e            /* rw */
+#define IRQ_COAL        (1 << 0)
+#define IRQ_DLY         (1 << 1)
+#define IRQ_ERR         (1 << 2)
+#define IRQ_DMAERR      (1 << 7)            /* this is not documented ??? */
+/*
+ *  0:7      24:31       DltTmrValue
+ *  8:15     16:23       ClscCntrValue
+ *  16:17    14:15       Reserved
+ *  18:21    10:13       ClscCnt
+ *  22:23    8:9         DlyCnt
+ *  24:28    3::7        Reserved
+ */
+#define RX_CHNL_STS         0x0f        /* r */
+#define CHNL_STS_ENGBUSY    (1 << 1)
+#define CHNL_STS_EOP        (1 << 2)
+#define CHNL_STS_SOP        (1 << 3)
+#define CHNL_STS_CMPLT      (1 << 4)
+#define CHNL_STS_SOE        (1 << 5)
+#define CHNL_STS_IOE        (1 << 6)
+#define CHNL_STS_ERR        (1 << 7)
+
+#define CHNL_STS_BSYWR      (1 << 16)
+#define CHNL_STS_CURPERR    (1 << 17)
+#define CHNL_STS_NXTPERR    (1 << 18)
+#define CHNL_STS_ADDRERR    (1 << 19)
+#define CHNL_STS_CMPERR     (1 << 20)
+#define CHNL_STS_TAILERR    (1 << 21)
+/*
+ *  0:9      22:31   Reserved
+ *  10       21      TailPErr
+ *  11       20      CmpErr
+ *  12       19      AddrErr
+ *  13       18      NxtPErr
+ *  14       17      CurPErr
+ *  15       16      BsyWr
+ *  16:23    8:15    Reserved
+ *  24       7       Error
+ *  25       6       IOE
+ *  26       5       SOE
+ *  27       4       Cmplt
+ *  28       3       SOP
+ *  29       2       EOP
+ *  30       1       EngBusy
+ *  31       0       Reserved
+ */
+
+#define DMA_CONTROL_REG             0x10            /* rw */
+#define DMA_CONTROL_RST                 (1 << 0)
+#define DMA_TAIL_ENABLE                 (1 << 2)
+
+/* XPS_LL_TEMAC direct registers definition */
+
+#define XTE_RAF0_OFFSET              0x00
+#define RAF0_RST                        (1 << 0)
+#define RAF0_MCSTREJ                    (1 << 1)
+#define RAF0_BCSTREJ                    (1 << 2)
+#define XTE_TPF0_OFFSET              0x04
+#define XTE_IFGP0_OFFSET             0x08
+#define XTE_ISR0_OFFSET              0x0c
+#define ISR0_HARDACSCMPLT               (1 << 0)
+#define ISR0_AUTONEG                    (1 << 1)
+#define ISR0_RXCMPLT                    (1 << 2)
+#define ISR0_RXREJ                      (1 << 3)
+#define ISR0_RXFIFOOVR                  (1 << 4)
+#define ISR0_TXCMPLT                    (1 << 5)
+#define ISR0_RXDCMLCK                   (1 << 6)
+
+#define XTE_IPR0_OFFSET              0x10
+#define XTE_IER0_OFFSET              0x14
+
+#define XTE_MSW0_OFFSET              0x20
+#define XTE_LSW0_OFFSET              0x24
+#define XTE_CTL0_OFFSET              0x28
+#define XTE_RDY0_OFFSET              0x2c
+
+#define XTE_RSE_MIIM_RR_MASK      0x0002
+#define XTE_RSE_MIIM_WR_MASK      0x0004
+#define XTE_RSE_CFG_RR_MASK       0x0020
+#define XTE_RSE_CFG_WR_MASK       0x0040
+#define XTE_RDY0_HARD_ACS_RDY_MASK  (0x10000)
+
+/* XPS_LL_TEMAC indirect registers offset definition */
+
+#define	XTE_RXC0_OFFSET			0x00000200 /* Rx configuration word 0 */
+#define	XTE_RXC1_OFFSET			0x00000240 /* Rx configuration word 1 */
+#define XTE_RXC1_RXRST_MASK		(1 << 31)  /* Receiver reset */
+#define XTE_RXC1_RXJMBO_MASK		(1 << 30)  /* Jumbo frame enable */
+#define XTE_RXC1_RXFCS_MASK		(1 << 29)  /* FCS not stripped */
+#define XTE_RXC1_RXEN_MASK		(1 << 28)  /* Receiver enable */
+#define XTE_RXC1_RXVLAN_MASK		(1 << 27)  /* VLAN enable */
+#define XTE_RXC1_RXHD_MASK		(1 << 26)  /* Half duplex */
+#define XTE_RXC1_RXLT_MASK		(1 << 25)  /* Length/type check disable */
+
+#define XTE_TXC_OFFSET			0x00000280 /*  Tx configuration */
+#define XTE_TXC_TXRST_MASK		(1 << 31)  /* Transmitter reset */
+#define XTE_TXC_TXJMBO_MASK		(1 << 30)  /* Jumbo frame enable */
+#define XTE_TXC_TXFCS_MASK		(1 << 29)  /* Generate FCS */
+#define XTE_TXC_TXEN_MASK		(1 << 28)  /* Transmitter enable */
+#define XTE_TXC_TXVLAN_MASK		(1 << 27)  /* VLAN enable */
+#define XTE_TXC_TXHD_MASK		(1 << 26)  /* Half duplex */
+
+#define XTE_FCC_OFFSET			0x000002C0 /* Flow control config */
+#define XTE_FCC_RXFLO_MASK		(1 << 29)  /* Rx flow control enable */
+#define XTE_FCC_TXFLO_MASK		(1 << 30)  /* Tx flow control enable */
+
+#define XTE_EMCFG_OFFSET		0x00000300 /* EMAC configuration */
+#define XTE_EMCFG_LINKSPD_MASK		0xC0000000 /* Link speed */
+#define XTE_EMCFG_HOSTEN_MASK		(1 << 26)  /* Host interface enable */
+#define XTE_EMCFG_LINKSPD_10		0x00000000 /* 10 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_100		(1 << 30)  /* 100 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_1000		(1 << 31)  /* 1000 Mbit LINKSPD_MASK */
+
+#define XTE_GMIC_OFFSET			0x00000320 /* RGMII/SGMII config */
+#define XTE_MC_OFFSET			0x00000340 /* MDIO configuration */
+#define XTE_UAW0_OFFSET			0x00000380 /* Unicast address word 0 */
+#define XTE_UAW1_OFFSET			0x00000384 /* Unicast address word 1 */
+
+#define XTE_MAW0_OFFSET			0x00000388 /* Multicast addr word 0 */
+#define XTE_MAW1_OFFSET			0x0000038C /* Multicast addr word 1 */
+#define XTE_AFM_OFFSET			0x00000390 /* Promiscuous mode */
+#define XTE_AFM_EPPRM_MASK		(1 << 31)  /* Promiscuous mode enable */
+
+/* Interrupt Request status */
+#define XTE_TIS_OFFSET			0x000003A0
+#define TIS_FRIS			(1 << 0)
+#define TIS_MRIS			(1 << 1)
+#define TIS_MWIS			(1 << 2)
+#define TIS_ARIS			(1 << 3)
+#define TIS_AWIS			(1 << 4)
+#define TIS_CRIS			(1 << 5)
+#define TIS_CWIS			(1 << 6)
+
+#define XTE_TIE_OFFSET			0x000003A4 /* Interrupt enable */
+
+/* MII Management Control register (MGTCR) */
+#define XTE_MGTDR_OFFSET		0x000003B0 /* MII data */
+#define XTE_MIIMAI_OFFSET		0x000003B4 /* MII control */
+
+#define CNTLREG_WRITE_ENABLE_MASK   0x8000
+#define CNTLREG_EMAC1SEL_MASK       0x0400
+#define CNTLREG_ADDRESSCODE_MASK    0x03ff
+
+/* CDMAC descriptor status bit definitions */
+
+#define STS_CTRL_APP0_ERR         (1 << 31)
+#define STS_CTRL_APP0_IRQONEND    (1 << 30)
+/* undocumented */
+#define STS_CTRL_APP0_STOPONEND   (1 << 29)
+#define STS_CTRL_APP0_CMPLT       (1 << 28)
+#define STS_CTRL_APP0_SOP         (1 << 27)
+#define STS_CTRL_APP0_EOP         (1 << 26)
+#define STS_CTRL_APP0_ENGBUSY     (1 << 25)
+/* undocumented */
+#define STS_CTRL_APP0_ENGRST      (1 << 24)
+
+#define TX_CONTROL_CALC_CSUM_MASK   1
+
+#define MULTICAST_CAM_TABLE_NUM 4
+
+/* TEMAC Synthesis features */
+#define TEMAC_FEATURE_RX_CSUM  (1 << 0)
+#define TEMAC_FEATURE_TX_CSUM  (1 << 1)
+
+/* TX/RX CURDESC_PTR points to first descriptor */
+/* TX/RX TAILDESC_PTR points to last descriptor in linked list */
+
+/**
+ * struct cdmac_bd - LocalLink buffer descriptor format
+ *
+ * app0 bits:
+ *	0    Error
+ *	1    IrqOnEnd    generate an interrupt at completion of DMA  op
+ *	2    reserved
+ *	3    completed   Current descriptor completed
+ *	4    SOP         TX - marks first desc/ RX marks first desct
+ *	5    EOP         TX marks last desc/RX marks last desc
+ *	6    EngBusy     DMA is processing
+ *	7    reserved
+ *	8:31 application specific
+ */
+struct cdmac_bd {
+	u32 next;	/* Physical address of next buffer descriptor */
+	u32 phys;
+	u32 len;
+	u32 app0;
+	u32 app1;	/* TX start << 16 | insert */
+	u32 app2;	/* TX csum */
+	u32 app3;
+	u32 app4;	/* skb for TX length for RX */
+};
+
+struct temac_local {
+	struct net_device *ndev;
+	struct device *dev;
+
+	/* Connection to PHY device */
+	struct device_node *phy_node;
+	/* For non-device-tree devices */
+	char phy_name[MII_BUS_ID_SIZE + 3];
+	phy_interface_t phy_interface;
+
+	/* MDIO bus data */
+	struct mii_bus *mii_bus;	/* MII bus reference */
+
+	/* IO registers, dma functions and IRQs */
+	void __iomem *regs;
+	void __iomem *sdma_regs;
+#ifdef CONFIG_PPC_DCR
+	dcr_host_t sdma_dcrs;
+#endif
+	u32 (*temac_ior)(struct temac_local *lp, int offset);
+	void (*temac_iow)(struct temac_local *lp, int offset, u32 value);
+	u32 (*dma_in)(struct temac_local *lp, int reg);
+	void (*dma_out)(struct temac_local *lp, int reg, u32 value);
+
+	int tx_irq;
+	int rx_irq;
+	int emac_num;
+
+	struct sk_buff **rx_skb;
+	spinlock_t rx_lock;
+	/* For synchronization of indirect register access.  Must be
+	 * shared mutex between interfaces in same TEMAC block.
+	 */
+	spinlock_t *indirect_lock;
+	u32 options;			/* Current options word */
+	int last_link;
+	unsigned int temac_features;
+
+	/* Buffer descriptors */
+	struct cdmac_bd *tx_bd_v;
+	dma_addr_t tx_bd_p;
+	u32 tx_bd_num;
+	struct cdmac_bd *rx_bd_v;
+	dma_addr_t rx_bd_p;
+	u32 rx_bd_num;
+	int tx_bd_ci;
+	int tx_bd_tail;
+	int rx_bd_ci;
+	int rx_bd_tail;
+
+	/* DMA channel control setup */
+	u8 coalesce_count_tx;
+	u8 coalesce_delay_tx;
+	u8 coalesce_count_rx;
+	u8 coalesce_delay_rx;
+
+	struct delayed_work restart_work;
+};
+
+/* Wrappers for temac_ior()/temac_iow() function pointers above */
+#define temac_ior(lp, o) ((lp)->temac_ior(lp, o))
+#define temac_iow(lp, o, v) ((lp)->temac_iow(lp, o, v))
+
+/* xilinx_temac.c */
+int temac_indirect_busywait(struct temac_local *lp);
+u32 temac_indirect_in32(struct temac_local *lp, int reg);
+u32 temac_indirect_in32_locked(struct temac_local *lp, int reg);
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
+void temac_indirect_out32_locked(struct temac_local *lp, int reg, u32 value);
+
+/* xilinx_temac_mdio.c */
+int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev);
+void temac_mdio_teardown(struct temac_local *lp);
+
+#endif /* XILINX_LL_TEMAC_H */