Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2272 insertions, 0 deletions

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
new file mode 100644
index 0000000000..3297aff969
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -0,0 +1,2272 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Xilinx Axi Ethernet device driver
+ *
+ * Copyright (c) 2008 Nissin Systems Co., Ltd.,  Yoshio Kashiwagi
+ * Copyright (c) 2005-2008 DLA Systems,  David H. Lynch Jr. <dhlii@dlasys.net>
+ * Copyright (c) 2008-2009 Secret Lab Technologies Ltd.
+ * Copyright (c) 2010 - 2011 Michal Simek <monstr@monstr.eu>
+ * Copyright (c) 2010 - 2011 PetaLogix
+ * Copyright (c) 2019 - 2022 Calian Advanced Technologies
+ * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
+ *
+ * This is a driver for the Xilinx Axi Ethernet which is used in the Virtex6
+ * and Spartan6.
+ *
+ * TODO:
+ *  - Add Axi Fifo support.
+ *  - Factor out Axi DMA code into separate driver.
+ *  - Test and fix basic multicast filtering.
+ *  - Add support for extended multicast filtering.
+ *  - Test basic VLAN support.
+ *  - Add support for extended VLAN support.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <linux/math64.h>
+#include <linux/phy.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+
+#include "xilinx_axienet.h"
+
+/* Descriptors defines for Tx and Rx DMA */
+#define TX_BD_NUM_DEFAULT		128
+#define RX_BD_NUM_DEFAULT		1024
+#define TX_BD_NUM_MIN			(MAX_SKB_FRAGS + 1)
+#define TX_BD_NUM_MAX			4096
+#define RX_BD_NUM_MAX			4096
+
+/* Must be shorter than length of ethtool_drvinfo.driver field to fit */
+#define DRIVER_NAME		"xaxienet"
+#define DRIVER_DESCRIPTION	"Xilinx Axi Ethernet driver"
+#define DRIVER_VERSION		"1.00a"
+
+#define AXIENET_REGS_N		40
+
+/* Match table for of_platform binding */
+static const struct of_device_id axienet_of_match[] = {
+	{ .compatible = "xlnx,axi-ethernet-1.00.a", },
+	{ .compatible = "xlnx,axi-ethernet-1.01.a", },
+	{ .compatible = "xlnx,axi-ethernet-2.01.a", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, axienet_of_match);
+
+/* Option table for setting up Axi Ethernet hardware options */
+static struct axienet_option axienet_options[] = {
+	/* Turn on jumbo packet support for both Rx and Tx */
+	{
+		.opt = XAE_OPTION_JUMBO,
+		.reg = XAE_TC_OFFSET,
+		.m_or = XAE_TC_JUM_MASK,
+	}, {
+		.opt = XAE_OPTION_JUMBO,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_JUM_MASK,
+	}, { /* Turn on VLAN packet support for both Rx and Tx */
+		.opt = XAE_OPTION_VLAN,
+		.reg = XAE_TC_OFFSET,
+		.m_or = XAE_TC_VLAN_MASK,
+	}, {
+		.opt = XAE_OPTION_VLAN,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_VLAN_MASK,
+	}, { /* Turn on FCS stripping on receive packets */
+		.opt = XAE_OPTION_FCS_STRIP,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_FCS_MASK,
+	}, { /* Turn on FCS insertion on transmit packets */
+		.opt = XAE_OPTION_FCS_INSERT,
+		.reg = XAE_TC_OFFSET,
+		.m_or = XAE_TC_FCS_MASK,
+	}, { /* Turn off length/type field checking on receive packets */
+		.opt = XAE_OPTION_LENTYPE_ERR,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_LT_DIS_MASK,
+	}, { /* Turn on Rx flow control */
+		.opt = XAE_OPTION_FLOW_CONTROL,
+		.reg = XAE_FCC_OFFSET,
+		.m_or = XAE_FCC_FCRX_MASK,
+	}, { /* Turn on Tx flow control */
+		.opt = XAE_OPTION_FLOW_CONTROL,
+		.reg = XAE_FCC_OFFSET,
+		.m_or = XAE_FCC_FCTX_MASK,
+	}, { /* Turn on promiscuous frame filtering */
+		.opt = XAE_OPTION_PROMISC,
+		.reg = XAE_FMI_OFFSET,
+		.m_or = XAE_FMI_PM_MASK,
+	}, { /* Enable transmitter */
+		.opt = XAE_OPTION_TXEN,
+		.reg = XAE_TC_OFFSET,
+		.m_or = XAE_TC_TX_MASK,
+	}, { /* Enable receiver */
+		.opt = XAE_OPTION_RXEN,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_RX_MASK,
+	},
+	{}
+};
+
+/**
+ * axienet_dma_in32 - Memory mapped Axi DMA register read
+ * @lp:		Pointer to axienet local structure
+ * @reg:	Address offset from the base address of the Axi DMA core
+ *
+ * Return: The contents of the Axi DMA register
+ *
+ * This function returns the contents of the corresponding Axi DMA register.
+ */
+static inline u32 axienet_dma_in32(struct axienet_local *lp, off_t reg)
+{
+	return ioread32(lp->dma_regs + reg);
+}
+
+static void desc_set_phys_addr(struct axienet_local *lp, dma_addr_t addr,
+			       struct axidma_bd *desc)
+{
+	desc->phys = lower_32_bits(addr);
+	if (lp->features & XAE_FEATURE_DMA_64BIT)
+		desc->phys_msb = upper_32_bits(addr);
+}
+
+static dma_addr_t desc_get_phys_addr(struct axienet_local *lp,
+				     struct axidma_bd *desc)
+{
+	dma_addr_t ret = desc->phys;
+
+	if (lp->features & XAE_FEATURE_DMA_64BIT)
+		ret |= ((dma_addr_t)desc->phys_msb << 16) << 16;
+
+	return ret;
+}
+
+/**
+ * axienet_dma_bd_release - Release buffer descriptor rings
+ * @ndev:	Pointer to the net_device structure
+ *
+ * This function is used to release the descriptors allocated in
+ * axienet_dma_bd_init. axienet_dma_bd_release is called when Axi Ethernet
+ * driver stop api is called.
+ */
+static void axienet_dma_bd_release(struct net_device *ndev)
+{
+	int i;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	/* If we end up here, tx_bd_v must have been DMA allocated. */
+	dma_free_coherent(lp->dev,
+			  sizeof(*lp->tx_bd_v) * lp->tx_bd_num,
+			  lp->tx_bd_v,
+			  lp->tx_bd_p);
+
+	if (!lp->rx_bd_v)
+		return;
+
+	for (i = 0; i < lp->rx_bd_num; i++) {
+		dma_addr_t phys;
+
+		/* A NULL skb means this descriptor has not been initialised
+		 * at all.
+		 */
+		if (!lp->rx_bd_v[i].skb)
+			break;
+
+		dev_kfree_skb(lp->rx_bd_v[i].skb);
+
+		/* For each descriptor, we programmed cntrl with the (non-zero)
+		 * descriptor size, after it had been successfully allocated.
+		 * So a non-zero value in there means we need to unmap it.
+		 */
+		if (lp->rx_bd_v[i].cntrl) {
+			phys = desc_get_phys_addr(lp, &lp->rx_bd_v[i]);
+			dma_unmap_single(lp->dev, phys,
+					 lp->max_frm_size, DMA_FROM_DEVICE);
+		}
+	}
+
+	dma_free_coherent(lp->dev,
+			  sizeof(*lp->rx_bd_v) * lp->rx_bd_num,
+			  lp->rx_bd_v,
+			  lp->rx_bd_p);
+}
+
+/**
+ * axienet_usec_to_timer - Calculate IRQ delay timer value
+ * @lp:		Pointer to the axienet_local structure
+ * @coalesce_usec: Microseconds to convert into timer value
+ */
+static u32 axienet_usec_to_timer(struct axienet_local *lp, u32 coalesce_usec)
+{
+	u32 result;
+	u64 clk_rate = 125000000; /* arbitrary guess if no clock rate set */
+
+	if (lp->axi_clk)
+		clk_rate = clk_get_rate(lp->axi_clk);
+
+	/* 1 Timeout Interval = 125 * (clock period of SG clock) */
+	result = DIV64_U64_ROUND_CLOSEST((u64)coalesce_usec * clk_rate,
+					 (u64)125000000);
+	if (result > 255)
+		result = 255;
+
+	return result;
+}
+
+/**
+ * axienet_dma_start - Set up DMA registers and start DMA operation
+ * @lp:		Pointer to the axienet_local structure
+ */
+static void axienet_dma_start(struct axienet_local *lp)
+{
+	/* Start updating the Rx channel control register */
+	lp->rx_dma_cr = (lp->coalesce_count_rx << XAXIDMA_COALESCE_SHIFT) |
+			XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_ERROR_MASK;
+	/* Only set interrupt delay timer if not generating an interrupt on
+	 * the first RX packet. Otherwise leave at 0 to disable delay interrupt.
+	 */
+	if (lp->coalesce_count_rx > 1)
+		lp->rx_dma_cr |= (axienet_usec_to_timer(lp, lp->coalesce_usec_rx)
+					<< XAXIDMA_DELAY_SHIFT) |
+				 XAXIDMA_IRQ_DELAY_MASK;
+	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, lp->rx_dma_cr);
+
+	/* Start updating the Tx channel control register */
+	lp->tx_dma_cr = (lp->coalesce_count_tx << XAXIDMA_COALESCE_SHIFT) |
+			XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_ERROR_MASK;
+	/* Only set interrupt delay timer if not generating an interrupt on
+	 * the first TX packet. Otherwise leave at 0 to disable delay interrupt.
+	 */
+	if (lp->coalesce_count_tx > 1)
+		lp->tx_dma_cr |= (axienet_usec_to_timer(lp, lp->coalesce_usec_tx)
+					<< XAXIDMA_DELAY_SHIFT) |
+				 XAXIDMA_IRQ_DELAY_MASK;
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, lp->tx_dma_cr);
+
+	/* Populate the tail pointer and bring the Rx Axi DMA engine out of
+	 * halted state. This will make the Rx side ready for reception.
+	 */
+	axienet_dma_out_addr(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
+	lp->rx_dma_cr |= XAXIDMA_CR_RUNSTOP_MASK;
+	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, lp->rx_dma_cr);
+	axienet_dma_out_addr(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
+			     (sizeof(*lp->rx_bd_v) * (lp->rx_bd_num - 1)));
+
+	/* Write to the RS (Run-stop) bit in the Tx channel control register.
+	 * Tx channel is now ready to run. But only after we write to the
+	 * tail pointer register that the Tx channel will start transmitting.
+	 */
+	axienet_dma_out_addr(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
+	lp->tx_dma_cr |= XAXIDMA_CR_RUNSTOP_MASK;
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, lp->tx_dma_cr);
+}
+
+/**
+ * axienet_dma_bd_init - Setup buffer descriptor rings for Axi DMA
+ * @ndev:	Pointer to the net_device structure
+ *
+ * Return: 0, on success -ENOMEM, on failure
+ *
+ * This function is called to initialize the Rx and Tx DMA descriptor
+ * rings. This initializes the descriptors with required default values
+ * and is called when Axi Ethernet driver reset is called.
+ */
+static int axienet_dma_bd_init(struct net_device *ndev)
+{
+	int i;
+	struct sk_buff *skb;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	/* Reset the indexes which are used for accessing the BDs */
+	lp->tx_bd_ci = 0;
+	lp->tx_bd_tail = 0;
+	lp->rx_bd_ci = 0;
+
+	/* Allocate the Tx and Rx buffer descriptors. */
+	lp->tx_bd_v = dma_alloc_coherent(lp->dev,
+					 sizeof(*lp->tx_bd_v) * lp->tx_bd_num,
+					 &lp->tx_bd_p, GFP_KERNEL);
+	if (!lp->tx_bd_v)
+		return -ENOMEM;
+
+	lp->rx_bd_v = dma_alloc_coherent(lp->dev,
+					 sizeof(*lp->rx_bd_v) * lp->rx_bd_num,
+					 &lp->rx_bd_p, GFP_KERNEL);
+	if (!lp->rx_bd_v)
+		goto out;
+
+	for (i = 0; i < lp->tx_bd_num; i++) {
+		dma_addr_t addr = lp->tx_bd_p +
+				  sizeof(*lp->tx_bd_v) *
+				  ((i + 1) % lp->tx_bd_num);
+
+		lp->tx_bd_v[i].next = lower_32_bits(addr);
+		if (lp->features & XAE_FEATURE_DMA_64BIT)
+			lp->tx_bd_v[i].next_msb = upper_32_bits(addr);
+	}
+
+	for (i = 0; i < lp->rx_bd_num; i++) {
+		dma_addr_t addr;
+
+		addr = lp->rx_bd_p + sizeof(*lp->rx_bd_v) *
+			((i + 1) % lp->rx_bd_num);
+		lp->rx_bd_v[i].next = lower_32_bits(addr);
+		if (lp->features & XAE_FEATURE_DMA_64BIT)
+			lp->rx_bd_v[i].next_msb = upper_32_bits(addr);
+
+		skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size);
+		if (!skb)
+			goto out;
+
+		lp->rx_bd_v[i].skb = skb;
+		addr = dma_map_single(lp->dev, skb->data,
+				      lp->max_frm_size, DMA_FROM_DEVICE);
+		if (dma_mapping_error(lp->dev, addr)) {
+			netdev_err(ndev, "DMA mapping error\n");
+			goto out;
+		}
+		desc_set_phys_addr(lp, addr, &lp->rx_bd_v[i]);
+
+		lp->rx_bd_v[i].cntrl = lp->max_frm_size;
+	}
+
+	axienet_dma_start(lp);
+
+	return 0;
+out:
+	axienet_dma_bd_release(ndev);
+	return -ENOMEM;
+}
+
+/**
+ * axienet_set_mac_address - Write the MAC address
+ * @ndev:	Pointer to the net_device structure
+ * @address:	6 byte Address to be written as MAC address
+ *
+ * This function is called to initialize the MAC address of the Axi Ethernet
+ * core. It writes to the UAW0 and UAW1 registers of the core.
+ */
+static void axienet_set_mac_address(struct net_device *ndev,
+				    const void *address)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (address)
+		eth_hw_addr_set(ndev, address);
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		eth_hw_addr_random(ndev);
+
+	/* Set up unicast MAC address filter set its mac address */
+	axienet_iow(lp, XAE_UAW0_OFFSET,
+		    (ndev->dev_addr[0]) |
+		    (ndev->dev_addr[1] << 8) |
+		    (ndev->dev_addr[2] << 16) |
+		    (ndev->dev_addr[3] << 24));
+	axienet_iow(lp, XAE_UAW1_OFFSET,
+		    (((axienet_ior(lp, XAE_UAW1_OFFSET)) &
+		      ~XAE_UAW1_UNICASTADDR_MASK) |
+		     (ndev->dev_addr[4] |
+		     (ndev->dev_addr[5] << 8))));
+}
+
+/**
+ * netdev_set_mac_address - Write the MAC address (from outside the driver)
+ * @ndev:	Pointer to the net_device structure
+ * @p:		6 byte Address to be written as MAC address
+ *
+ * Return: 0 for all conditions. Presently, there is no failure case.
+ *
+ * This function is called to initialize the MAC address of the Axi Ethernet
+ * core. It calls the core specific axienet_set_mac_address. This is the
+ * function that goes into net_device_ops structure entry ndo_set_mac_address.
+ */
+static int netdev_set_mac_address(struct net_device *ndev, void *p)
+{
+	struct sockaddr *addr = p;
+	axienet_set_mac_address(ndev, addr->sa_data);
+	return 0;
+}
+
+/**
+ * axienet_set_multicast_list - Prepare the multicast table
+ * @ndev:	Pointer to the net_device structure
+ *
+ * This function is called to initialize the multicast table during
+ * initialization. The Axi Ethernet basic multicast support has a four-entry
+ * multicast table which is initialized here. Additionally this function
+ * goes into the net_device_ops structure entry ndo_set_multicast_list. This
+ * means whenever the multicast table entries need to be updated this
+ * function gets called.
+ */
+static void axienet_set_multicast_list(struct net_device *ndev)
+{
+	int i;
+	u32 reg, af0reg, af1reg;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) ||
+	    netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) {
+		/* We must make the kernel realize we had to move into
+		 * promiscuous mode. If it was a promiscuous mode request
+		 * the flag is already set. If not we set it.
+		 */
+		ndev->flags |= IFF_PROMISC;
+		reg = axienet_ior(lp, XAE_FMI_OFFSET);
+		reg |= XAE_FMI_PM_MASK;
+		axienet_iow(lp, XAE_FMI_OFFSET, reg);
+		dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
+	} else if (!netdev_mc_empty(ndev)) {
+		struct netdev_hw_addr *ha;
+
+		i = 0;
+		netdev_for_each_mc_addr(ha, ndev) {
+			if (i >= XAE_MULTICAST_CAM_TABLE_NUM)
+				break;
+
+			af0reg = (ha->addr[0]);
+			af0reg |= (ha->addr[1] << 8);
+			af0reg |= (ha->addr[2] << 16);
+			af0reg |= (ha->addr[3] << 24);
+
+			af1reg = (ha->addr[4]);
+			af1reg |= (ha->addr[5] << 8);
+
+			reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00;
+			reg |= i;
+
+			axienet_iow(lp, XAE_FMI_OFFSET, reg);
+			axienet_iow(lp, XAE_AF0_OFFSET, af0reg);
+			axienet_iow(lp, XAE_AF1_OFFSET, af1reg);
+			i++;
+		}
+	} else {
+		reg = axienet_ior(lp, XAE_FMI_OFFSET);
+		reg &= ~XAE_FMI_PM_MASK;
+
+		axienet_iow(lp, XAE_FMI_OFFSET, reg);
+
+		for (i = 0; i < XAE_MULTICAST_CAM_TABLE_NUM; i++) {
+			reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00;
+			reg |= i;
+
+			axienet_iow(lp, XAE_FMI_OFFSET, reg);
+			axienet_iow(lp, XAE_AF0_OFFSET, 0);
+			axienet_iow(lp, XAE_AF1_OFFSET, 0);
+		}
+
+		dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
+	}
+}
+
+/**
+ * axienet_setoptions - Set an Axi Ethernet option
+ * @ndev:	Pointer to the net_device structure
+ * @options:	Option to be enabled/disabled
+ *
+ * The Axi Ethernet core has multiple features which can be selectively turned
+ * on or off. The typical options could be jumbo frame option, basic VLAN
+ * option, promiscuous mode option etc. This function is used to set or clear
+ * these options in the Axi Ethernet hardware. This is done through
+ * axienet_option structure .
+ */
+static void axienet_setoptions(struct net_device *ndev, u32 options)
+{
+	int reg;
+	struct axienet_local *lp = netdev_priv(ndev);
+	struct axienet_option *tp = &axienet_options[0];
+
+	while (tp->opt) {
+		reg = ((axienet_ior(lp, tp->reg)) & ~(tp->m_or));
+		if (options & tp->opt)
+			reg |= tp->m_or;
+		axienet_iow(lp, tp->reg, reg);
+		tp++;
+	}
+
+	lp->options |= options;
+}
+
+static int __axienet_device_reset(struct axienet_local *lp)
+{
+	u32 value;
+	int ret;
+
+	/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
+	 * process of Axi DMA takes a while to complete as all pending
+	 * commands/transfers will be flushed or completed during this
+	 * reset process.
+	 * Note that even though both TX and RX have their own reset register,
+	 * they both reset the entire DMA core, so only one needs to be used.
+	 */
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, XAXIDMA_CR_RESET_MASK);
+	ret = read_poll_timeout(axienet_dma_in32, value,
+				!(value & XAXIDMA_CR_RESET_MASK),
+				DELAY_OF_ONE_MILLISEC, 50000, false, lp,
+				XAXIDMA_TX_CR_OFFSET);
+	if (ret) {
+		dev_err(lp->dev, "%s: DMA reset timeout!\n", __func__);
+		return ret;
+	}
+
+	/* Wait for PhyRstCmplt bit to be set, indicating the PHY reset has finished */
+	ret = read_poll_timeout(axienet_ior, value,
+				value & XAE_INT_PHYRSTCMPLT_MASK,
+				DELAY_OF_ONE_MILLISEC, 50000, false, lp,
+				XAE_IS_OFFSET);
+	if (ret) {
+		dev_err(lp->dev, "%s: timeout waiting for PhyRstCmplt\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * axienet_dma_stop - Stop DMA operation
+ * @lp:		Pointer to the axienet_local structure
+ */
+static void axienet_dma_stop(struct axienet_local *lp)
+{
+	int count;
+	u32 cr, sr;
+
+	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	cr &= ~(XAXIDMA_CR_RUNSTOP_MASK | XAXIDMA_IRQ_ALL_MASK);
+	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
+	synchronize_irq(lp->rx_irq);
+
+	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	cr &= ~(XAXIDMA_CR_RUNSTOP_MASK | XAXIDMA_IRQ_ALL_MASK);
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);
+	synchronize_irq(lp->tx_irq);
+
+	/* Give DMAs a chance to halt gracefully */
+	sr = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
+	for (count = 0; !(sr & XAXIDMA_SR_HALT_MASK) && count < 5; ++count) {
+		msleep(20);
+		sr = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
+	}
+
+	sr = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
+	for (count = 0; !(sr & XAXIDMA_SR_HALT_MASK) && count < 5; ++count) {
+		msleep(20);
+		sr = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
+	}
+
+	/* Do a reset to ensure DMA is really stopped */
+	axienet_lock_mii(lp);
+	__axienet_device_reset(lp);
+	axienet_unlock_mii(lp);
+}
+
+/**
+ * axienet_device_reset - Reset and initialize the Axi Ethernet hardware.
+ * @ndev:	Pointer to the net_device structure
+ *
+ * This function is called to reset and initialize the Axi Ethernet core. This
+ * is typically called during initialization. It does a reset of the Axi DMA
+ * Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines
+ * are connected to Axi Ethernet reset lines, this in turn resets the Axi
+ * Ethernet core. No separate hardware reset is done for the Axi Ethernet
+ * core.
+ * Returns 0 on success or a negative error number otherwise.
+ */
+static int axienet_device_reset(struct net_device *ndev)
+{
+	u32 axienet_status;
+	struct axienet_local *lp = netdev_priv(ndev);
+	int ret;
+
+	ret = __axienet_device_reset(lp);
+	if (ret)
+		return ret;
+
+	lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE;
+	lp->options |= XAE_OPTION_VLAN;
+	lp->options &= (~XAE_OPTION_JUMBO);
+
+	if ((ndev->mtu > XAE_MTU) &&
+	    (ndev->mtu <= XAE_JUMBO_MTU)) {
+		lp->max_frm_size = ndev->mtu + VLAN_ETH_HLEN +
+					XAE_TRL_SIZE;
+
+		if (lp->max_frm_size <= lp->rxmem)
+			lp->options |= XAE_OPTION_JUMBO;
+	}
+
+	ret = axienet_dma_bd_init(ndev);
+	if (ret) {
+		netdev_err(ndev, "%s: descriptor allocation failed\n",
+			   __func__);
+		return ret;
+	}
+
+	axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET);
+	axienet_status &= ~XAE_RCW1_RX_MASK;
+	axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status);
+
+	axienet_status = axienet_ior(lp, XAE_IP_OFFSET);
+	if (axienet_status & XAE_INT_RXRJECT_MASK)
+		axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK);
+	axienet_iow(lp, XAE_IE_OFFSET, lp->eth_irq > 0 ?
+		    XAE_INT_RECV_ERROR_MASK : 0);
+
+	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);
+
+	/* Sync default options with HW but leave receiver and
+	 * transmitter disabled.
+	 */
+	axienet_setoptions(ndev, lp->options &
+			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
+	axienet_set_mac_address(ndev, NULL);
+	axienet_set_multicast_list(ndev);
+	axienet_setoptions(ndev, lp->options);
+
+	netif_trans_update(ndev);
+
+	return 0;
+}
+
+/**
+ * axienet_free_tx_chain - Clean up a series of linked TX descriptors.
+ * @lp:		Pointer to the axienet_local structure
+ * @first_bd:	Index of first descriptor to clean up
+ * @nr_bds:	Max number of descriptors to clean up
+ * @force:	Whether to clean descriptors even if not complete
+ * @sizep:	Pointer to a u32 filled with the total sum of all bytes
+ *		in all cleaned-up descriptors. Ignored if NULL.
+ * @budget:	NAPI budget (use 0 when not called from NAPI poll)
+ *
+ * Would either be called after a successful transmit operation, or after
+ * there was an error when setting up the chain.
+ * Returns the number of descriptors handled.
+ */
+static int axienet_free_tx_chain(struct axienet_local *lp, u32 first_bd,
+				 int nr_bds, bool force, u32 *sizep, int budget)
+{
+	struct axidma_bd *cur_p;
+	unsigned int status;
+	dma_addr_t phys;
+	int i;
+
+	for (i = 0; i < nr_bds; i++) {
+		cur_p = &lp->tx_bd_v[(first_bd + i) % lp->tx_bd_num];
+		status = cur_p->status;
+
+		/* If force is not specified, clean up only descriptors
+		 * that have been completed by the MAC.
+		 */
+		if (!force && !(status & XAXIDMA_BD_STS_COMPLETE_MASK))
+			break;
+
+		/* Ensure we see complete descriptor update */
+		dma_rmb();
+		phys = desc_get_phys_addr(lp, cur_p);
+		dma_unmap_single(lp->dev, phys,
+				 (cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK),
+				 DMA_TO_DEVICE);
+
+		if (cur_p->skb && (status & XAXIDMA_BD_STS_COMPLETE_MASK))
+			napi_consume_skb(cur_p->skb, budget);
+
+		cur_p->app0 = 0;
+		cur_p->app1 = 0;
+		cur_p->app2 = 0;
+		cur_p->app4 = 0;
+		cur_p->skb = NULL;
+		/* ensure our transmit path and device don't prematurely see status cleared */
+		wmb();
+		cur_p->cntrl = 0;
+		cur_p->status = 0;
+
+		if (sizep)
+			*sizep += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
+	}
+
+	return i;
+}
+
+/**
+ * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy
+ * @lp:		Pointer to the axienet_local structure
+ * @num_frag:	The number of BDs to check for
+ *
+ * Return: 0, on success
+ *	    NETDEV_TX_BUSY, if any of the descriptors are not free
+ *
+ * This function is invoked before BDs are allocated and transmission starts.
+ * This function returns 0 if a BD or group of BDs can be allocated for
+ * transmission. If the BD or any of the BDs are not free the function
+ * returns a busy status.
+ */
+static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
+					    int num_frag)
+{
+	struct axidma_bd *cur_p;
+
+	/* Ensure we see all descriptor updates from device or TX polling */
+	rmb();
+	cur_p = &lp->tx_bd_v[(READ_ONCE(lp->tx_bd_tail) + num_frag) %
+			     lp->tx_bd_num];
+	if (cur_p->cntrl)
+		return NETDEV_TX_BUSY;
+	return 0;
+}
+
+/**
+ * axienet_tx_poll - Invoked once a transmit is completed by the
+ * Axi DMA Tx channel.
+ * @napi:	Pointer to NAPI structure.
+ * @budget:	Max number of TX packets to process.
+ *
+ * Return: Number of TX packets processed.
+ *
+ * This function is invoked from the NAPI processing to notify the completion
+ * of transmit operation. It clears fields in the corresponding Tx BDs and
+ * unmaps the corresponding buffer so that CPU can regain ownership of the
+ * buffer. It finally invokes "netif_wake_queue" to restart transmission if
+ * required.
+ */
+static int axienet_tx_poll(struct napi_struct *napi, int budget)
+{
+	struct axienet_local *lp = container_of(napi, struct axienet_local, napi_tx);
+	struct net_device *ndev = lp->ndev;
+	u32 size = 0;
+	int packets;
+
+	packets = axienet_free_tx_chain(lp, lp->tx_bd_ci, budget, false, &size, budget);
+
+	if (packets) {
+		lp->tx_bd_ci += packets;
+		if (lp->tx_bd_ci >= lp->tx_bd_num)
+			lp->tx_bd_ci %= lp->tx_bd_num;
+
+		u64_stats_update_begin(&lp->tx_stat_sync);
+		u64_stats_add(&lp->tx_packets, packets);
+		u64_stats_add(&lp->tx_bytes, size);
+		u64_stats_update_end(&lp->tx_stat_sync);
+
+		/* Matches barrier in axienet_start_xmit */
+		smp_mb();
+
+		if (!axienet_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1))
+			netif_wake_queue(ndev);
+	}
+
+	if (packets < budget && napi_complete_done(napi, packets)) {
+		/* Re-enable TX completion interrupts. This should
+		 * cause an immediate interrupt if any TX packets are
+		 * already pending.
+		 */
+		axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, lp->tx_dma_cr);
+	}
+	return packets;
+}
+
+/**
+ * axienet_start_xmit - Starts the transmission.
+ * @skb:	sk_buff pointer that contains data to be Txed.
+ * @ndev:	Pointer to net_device structure.
+ *
+ * Return: NETDEV_TX_OK, on success
+ *	    NETDEV_TX_BUSY, if any of the descriptors are not free
+ *
+ * This function is invoked from upper layers to initiate transmission. The
+ * function uses the next available free BDs and populates their fields to
+ * start the transmission. Additionally if checksum offloading is supported,
+ * it populates AXI Stream Control fields with appropriate values.
+ */
+static netdev_tx_t
+axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	u32 ii;
+	u32 num_frag;
+	u32 csum_start_off;
+	u32 csum_index_off;
+	skb_frag_t *frag;
+	dma_addr_t tail_p, phys;
+	u32 orig_tail_ptr, new_tail_ptr;
+	struct axienet_local *lp = netdev_priv(ndev);
+	struct axidma_bd *cur_p;
+
+	orig_tail_ptr = lp->tx_bd_tail;
+	new_tail_ptr = orig_tail_ptr;
+
+	num_frag = skb_shinfo(skb)->nr_frags;
+	cur_p = &lp->tx_bd_v[orig_tail_ptr];
+
+	if (axienet_check_tx_bd_space(lp, num_frag + 1)) {
+		/* Should not happen as last start_xmit call should have
+		 * checked for sufficient space and queue should only be
+		 * woken when sufficient space is available.
+		 */
+		netif_stop_queue(ndev);
+		if (net_ratelimit())
+			netdev_warn(ndev, "TX ring unexpectedly full\n");
+		return NETDEV_TX_BUSY;
+	}
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		if (lp->features & XAE_FEATURE_FULL_TX_CSUM) {
+			/* Tx Full Checksum Offload Enabled */
+			cur_p->app0 |= 2;
+		} else if (lp->features & XAE_FEATURE_PARTIAL_TX_CSUM) {
+			csum_start_off = skb_transport_offset(skb);
+			csum_index_off = csum_start_off + skb->csum_offset;
+			/* Tx Partial Checksum Offload Enabled */
+			cur_p->app0 |= 1;
+			cur_p->app1 = (csum_start_off << 16) | csum_index_off;
+		}
+	} else if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
+		cur_p->app0 |= 2; /* Tx Full Checksum Offload Enabled */
+	}
+
+	phys = dma_map_single(lp->dev, skb->data,
+			      skb_headlen(skb), DMA_TO_DEVICE);
+	if (unlikely(dma_mapping_error(lp->dev, phys))) {
+		if (net_ratelimit())
+			netdev_err(ndev, "TX DMA mapping error\n");
+		ndev->stats.tx_dropped++;
+		return NETDEV_TX_OK;
+	}
+	desc_set_phys_addr(lp, phys, cur_p);
+	cur_p->cntrl = skb_headlen(skb) | XAXIDMA_BD_CTRL_TXSOF_MASK;
+
+	for (ii = 0; ii < num_frag; ii++) {
+		if (++new_tail_ptr >= lp->tx_bd_num)
+			new_tail_ptr = 0;
+		cur_p = &lp->tx_bd_v[new_tail_ptr];
+		frag = &skb_shinfo(skb)->frags[ii];
+		phys = dma_map_single(lp->dev,
+				      skb_frag_address(frag),
+				      skb_frag_size(frag),
+				      DMA_TO_DEVICE);
+		if (unlikely(dma_mapping_error(lp->dev, phys))) {
+			if (net_ratelimit())
+				netdev_err(ndev, "TX DMA mapping error\n");
+			ndev->stats.tx_dropped++;
+			axienet_free_tx_chain(lp, orig_tail_ptr, ii + 1,
+					      true, NULL, 0);
+			return NETDEV_TX_OK;
+		}
+		desc_set_phys_addr(lp, phys, cur_p);
+		cur_p->cntrl = skb_frag_size(frag);
+	}
+
+	cur_p->cntrl |= XAXIDMA_BD_CTRL_TXEOF_MASK;
+	cur_p->skb = skb;
+
+	tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * new_tail_ptr;
+	if (++new_tail_ptr >= lp->tx_bd_num)
+		new_tail_ptr = 0;
+	WRITE_ONCE(lp->tx_bd_tail, new_tail_ptr);
+
+	/* Start the transfer */
+	axienet_dma_out_addr(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p);
+
+	/* Stop queue if next transmit may not have space */
+	if (axienet_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1)) {
+		netif_stop_queue(ndev);
+
+		/* Matches barrier in axienet_tx_poll */
+		smp_mb();
+
+		/* Space might have just been freed - check again */
+		if (!axienet_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1))
+			netif_wake_queue(ndev);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * axienet_rx_poll - Triggered by RX ISR to complete the BD processing.
+ * @napi:	Pointer to NAPI structure.
+ * @budget:	Max number of RX packets to process.
+ *
+ * Return: Number of RX packets processed.
+ */
+static int axienet_rx_poll(struct napi_struct *napi, int budget)
+{
+	u32 length;
+	u32 csumstatus;
+	u32 size = 0;
+	int packets = 0;
+	dma_addr_t tail_p = 0;
+	struct axidma_bd *cur_p;
+	struct sk_buff *skb, *new_skb;
+	struct axienet_local *lp = container_of(napi, struct axienet_local, napi_rx);
+
+	cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+
+	while (packets < budget && (cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
+		dma_addr_t phys;
+
+		/* Ensure we see complete descriptor update */
+		dma_rmb();
+
+		skb = cur_p->skb;
+		cur_p->skb = NULL;
+
+		/* skb could be NULL if a previous pass already received the
+		 * packet for this slot in the ring, but failed to refill it
+		 * with a newly allocated buffer. In this case, don't try to
+		 * receive it again.
+		 */
+		if (likely(skb)) {
+			length = cur_p->app4 & 0x0000FFFF;
+
+			phys = desc_get_phys_addr(lp, cur_p);
+			dma_unmap_single(lp->dev, phys, lp->max_frm_size,
+					 DMA_FROM_DEVICE);
+
+			skb_put(skb, length);
+			skb->protocol = eth_type_trans(skb, lp->ndev);
+			/*skb_checksum_none_assert(skb);*/
+			skb->ip_summed = CHECKSUM_NONE;
+
+			/* if we're doing Rx csum offload, set it up */
+			if (lp->features & XAE_FEATURE_FULL_RX_CSUM) {
+				csumstatus = (cur_p->app2 &
+					      XAE_FULL_CSUM_STATUS_MASK) >> 3;
+				if (csumstatus == XAE_IP_TCP_CSUM_VALIDATED ||
+				    csumstatus == XAE_IP_UDP_CSUM_VALIDATED) {
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+				}
+			} else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 &&
+				   skb->protocol == htons(ETH_P_IP) &&
+				   skb->len > 64) {
+				skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF);
+				skb->ip_summed = CHECKSUM_COMPLETE;
+			}
+
+			napi_gro_receive(napi, skb);
+
+			size += length;
+			packets++;
+		}
+
+		new_skb = napi_alloc_skb(napi, lp->max_frm_size);
+		if (!new_skb)
+			break;
+
+		phys = dma_map_single(lp->dev, new_skb->data,
+				      lp->max_frm_size,
+				      DMA_FROM_DEVICE);
+		if (unlikely(dma_mapping_error(lp->dev, phys))) {
+			if (net_ratelimit())
+				netdev_err(lp->ndev, "RX DMA mapping error\n");
+			dev_kfree_skb(new_skb);
+			break;
+		}
+		desc_set_phys_addr(lp, phys, cur_p);
+
+		cur_p->cntrl = lp->max_frm_size;
+		cur_p->status = 0;
+		cur_p->skb = new_skb;
+
+		/* Only update tail_p to mark this slot as usable after it has
+		 * been successfully refilled.
+		 */
+		tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+
+		if (++lp->rx_bd_ci >= lp->rx_bd_num)
+			lp->rx_bd_ci = 0;
+		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+	}
+
+	u64_stats_update_begin(&lp->rx_stat_sync);
+	u64_stats_add(&lp->rx_packets, packets);
+	u64_stats_add(&lp->rx_bytes, size);
+	u64_stats_update_end(&lp->rx_stat_sync);
+
+	if (tail_p)
+		axienet_dma_out_addr(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
+
+	if (packets < budget && napi_complete_done(napi, packets)) {
+		/* Re-enable RX completion interrupts. This should
+		 * cause an immediate interrupt if any RX packets are
+		 * already pending.
+		 */
+		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, lp->rx_dma_cr);
+	}
+	return packets;
+}
+
+/**
+ * axienet_tx_irq - Tx Done Isr.
+ * @irq:	irq number
+ * @_ndev:	net_device pointer
+ *
+ * Return: IRQ_HANDLED if device generated a TX interrupt, IRQ_NONE otherwise.
+ *
+ * This is the Axi DMA Tx done Isr. It invokes NAPI polling to complete the
+ * TX BD processing.
+ */
+static irqreturn_t axienet_tx_irq(int irq, void *_ndev)
+{
+	unsigned int status;
+	struct net_device *ndev = _ndev;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	status = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
+
+	if (!(status & XAXIDMA_IRQ_ALL_MASK))
+		return IRQ_NONE;
+
+	axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
+
+	if (unlikely(status & XAXIDMA_IRQ_ERROR_MASK)) {
+		netdev_err(ndev, "DMA Tx error 0x%x\n", status);
+		netdev_err(ndev, "Current BD is at: 0x%x%08x\n",
+			   (lp->tx_bd_v[lp->tx_bd_ci]).phys_msb,
+			   (lp->tx_bd_v[lp->tx_bd_ci]).phys);
+		schedule_work(&lp->dma_err_task);
+	} else {
+		/* Disable further TX completion interrupts and schedule
+		 * NAPI to handle the completions.
+		 */
+		u32 cr = lp->tx_dma_cr;
+
+		cr &= ~(XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK);
+		axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);
+
+		napi_schedule(&lp->napi_tx);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * axienet_rx_irq - Rx Isr.
+ * @irq:	irq number
+ * @_ndev:	net_device pointer
+ *
+ * Return: IRQ_HANDLED if device generated a RX interrupt, IRQ_NONE otherwise.
+ *
+ * This is the Axi DMA Rx Isr. It invokes NAPI polling to complete the RX BD
+ * processing.
+ */
+static irqreturn_t axienet_rx_irq(int irq, void *_ndev)
+{
+	unsigned int status;
+	struct net_device *ndev = _ndev;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	status = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
+
+	if (!(status & XAXIDMA_IRQ_ALL_MASK))
+		return IRQ_NONE;
+
+	axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
+
+	if (unlikely(status & XAXIDMA_IRQ_ERROR_MASK)) {
+		netdev_err(ndev, "DMA Rx error 0x%x\n", status);
+		netdev_err(ndev, "Current BD is at: 0x%x%08x\n",
+			   (lp->rx_bd_v[lp->rx_bd_ci]).phys_msb,
+			   (lp->rx_bd_v[lp->rx_bd_ci]).phys);
+		schedule_work(&lp->dma_err_task);
+	} else {
+		/* Disable further RX completion interrupts and schedule
+		 * NAPI receive.
+		 */
+		u32 cr = lp->rx_dma_cr;
+
+		cr &= ~(XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK);
+		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
+
+		napi_schedule(&lp->napi_rx);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * axienet_eth_irq - Ethernet core Isr.
+ * @irq:	irq number
+ * @_ndev:	net_device pointer
+ *
+ * Return: IRQ_HANDLED if device generated a core interrupt, IRQ_NONE otherwise.
+ *
+ * Handle miscellaneous conditions indicated by Ethernet core IRQ.
+ */
+static irqreturn_t axienet_eth_irq(int irq, void *_ndev)
+{
+	struct net_device *ndev = _ndev;
+	struct axienet_local *lp = netdev_priv(ndev);
+	unsigned int pending;
+
+	pending = axienet_ior(lp, XAE_IP_OFFSET);
+	if (!pending)
+		return IRQ_NONE;
+
+	if (pending & XAE_INT_RXFIFOOVR_MASK)
+		ndev->stats.rx_missed_errors++;
+
+	if (pending & XAE_INT_RXRJECT_MASK)
+		ndev->stats.rx_frame_errors++;
+
+	axienet_iow(lp, XAE_IS_OFFSET, pending);
+	return IRQ_HANDLED;
+}
+
+static void axienet_dma_err_handler(struct work_struct *work);
+
+/**
+ * axienet_open - Driver open routine.
+ * @ndev:	Pointer to net_device structure
+ *
+ * Return: 0, on success.
+ *	    non-zero error value on failure
+ *
+ * This is the driver open routine. It calls phylink_start to start the
+ * PHY device.
+ * It also allocates interrupt service routines, enables the interrupt lines
+ * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer
+ * descriptors are initialized.
+ */
+static int axienet_open(struct net_device *ndev)
+{
+	int ret;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	dev_dbg(&ndev->dev, "axienet_open()\n");
+
+	/* When we do an Axi Ethernet reset, it resets the complete core
+	 * including the MDIO. MDIO must be disabled before resetting.
+	 * Hold MDIO bus lock to avoid MDIO accesses during the reset.
+	 */
+	axienet_lock_mii(lp);
+	ret = axienet_device_reset(ndev);
+	axienet_unlock_mii(lp);
+
+	ret = phylink_of_phy_connect(lp->phylink, lp->dev->of_node, 0);
+	if (ret) {
+		dev_err(lp->dev, "phylink_of_phy_connect() failed: %d\n", ret);
+		return ret;
+	}
+
+	phylink_start(lp->phylink);
+
+	/* Enable worker thread for Axi DMA error handling */
+	INIT_WORK(&lp->dma_err_task, axienet_dma_err_handler);
+
+	napi_enable(&lp->napi_rx);
+	napi_enable(&lp->napi_tx);
+
+	/* Enable interrupts for Axi DMA Tx */
+	ret = request_irq(lp->tx_irq, axienet_tx_irq, IRQF_SHARED,
+			  ndev->name, ndev);
+	if (ret)
+		goto err_tx_irq;
+	/* Enable interrupts for Axi DMA Rx */
+	ret = request_irq(lp->rx_irq, axienet_rx_irq, IRQF_SHARED,
+			  ndev->name, ndev);
+	if (ret)
+		goto err_rx_irq;
+	/* Enable interrupts for Axi Ethernet core (if defined) */
+	if (lp->eth_irq > 0) {
+		ret = request_irq(lp->eth_irq, axienet_eth_irq, IRQF_SHARED,
+				  ndev->name, ndev);
+		if (ret)
+			goto err_eth_irq;
+	}
+
+	return 0;
+
+err_eth_irq:
+	free_irq(lp->rx_irq, ndev);
+err_rx_irq:
+	free_irq(lp->tx_irq, ndev);
+err_tx_irq:
+	napi_disable(&lp->napi_tx);
+	napi_disable(&lp->napi_rx);
+	phylink_stop(lp->phylink);
+	phylink_disconnect_phy(lp->phylink);
+	cancel_work_sync(&lp->dma_err_task);
+	dev_err(lp->dev, "request_irq() failed\n");
+	return ret;
+}
+
+/**
+ * axienet_stop - Driver stop routine.
+ * @ndev:	Pointer to net_device structure
+ *
+ * Return: 0, on success.
+ *
+ * This is the driver stop routine. It calls phylink_disconnect to stop the PHY
+ * device. It also removes the interrupt handlers and disables the interrupts.
+ * The Axi DMA Tx/Rx BDs are released.
+ */
+static int axienet_stop(struct net_device *ndev)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	dev_dbg(&ndev->dev, "axienet_close()\n");
+
+	napi_disable(&lp->napi_tx);
+	napi_disable(&lp->napi_rx);
+
+	phylink_stop(lp->phylink);
+	phylink_disconnect_phy(lp->phylink);
+
+	axienet_setoptions(ndev, lp->options &
+			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
+
+	axienet_dma_stop(lp);
+
+	axienet_iow(lp, XAE_IE_OFFSET, 0);
+
+	cancel_work_sync(&lp->dma_err_task);
+
+	if (lp->eth_irq > 0)
+		free_irq(lp->eth_irq, ndev);
+	free_irq(lp->tx_irq, ndev);
+	free_irq(lp->rx_irq, ndev);
+
+	axienet_dma_bd_release(ndev);
+	return 0;
+}
+
+/**
+ * axienet_change_mtu - Driver change mtu routine.
+ * @ndev:	Pointer to net_device structure
+ * @new_mtu:	New mtu value to be applied
+ *
+ * Return: Always returns 0 (success).
+ *
+ * This is the change mtu driver routine. It checks if the Axi Ethernet
+ * hardware supports jumbo frames before changing the mtu. This can be
+ * called only when the device is not up.
+ */
+static int axienet_change_mtu(struct net_device *ndev, int new_mtu)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (netif_running(ndev))
+		return -EBUSY;
+
+	if ((new_mtu + VLAN_ETH_HLEN +
+		XAE_TRL_SIZE) > lp->rxmem)
+		return -EINVAL;
+
+	ndev->mtu = new_mtu;
+
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * axienet_poll_controller - Axi Ethernet poll mechanism.
+ * @ndev:	Pointer to net_device structure
+ *
+ * This implements Rx/Tx ISR poll mechanisms. The interrupts are disabled prior
+ * to polling the ISRs and are enabled back after the polling is done.
+ */
+static void axienet_poll_controller(struct net_device *ndev)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+	disable_irq(lp->tx_irq);
+	disable_irq(lp->rx_irq);
+	axienet_rx_irq(lp->tx_irq, ndev);
+	axienet_tx_irq(lp->rx_irq, ndev);
+	enable_irq(lp->tx_irq);
+	enable_irq(lp->rx_irq);
+}
+#endif
+
+static int axienet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct axienet_local *lp = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	return phylink_mii_ioctl(lp->phylink, rq, cmd);
+}
+
+static void
+axienet_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
+{
+	struct axienet_local *lp = netdev_priv(dev);
+	unsigned int start;
+
+	netdev_stats_to_stats64(stats, &dev->stats);
+
+	do {
+		start = u64_stats_fetch_begin(&lp->rx_stat_sync);
+		stats->rx_packets = u64_stats_read(&lp->rx_packets);
+		stats->rx_bytes = u64_stats_read(&lp->rx_bytes);
+	} while (u64_stats_fetch_retry(&lp->rx_stat_sync, start));
+
+	do {
+		start = u64_stats_fetch_begin(&lp->tx_stat_sync);
+		stats->tx_packets = u64_stats_read(&lp->tx_packets);
+		stats->tx_bytes = u64_stats_read(&lp->tx_bytes);
+	} while (u64_stats_fetch_retry(&lp->tx_stat_sync, start));
+}
+
+static const struct net_device_ops axienet_netdev_ops = {
+	.ndo_open = axienet_open,
+	.ndo_stop = axienet_stop,
+	.ndo_start_xmit = axienet_start_xmit,
+	.ndo_get_stats64 = axienet_get_stats64,
+	.ndo_change_mtu	= axienet_change_mtu,
+	.ndo_set_mac_address = netdev_set_mac_address,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_eth_ioctl = axienet_ioctl,
+	.ndo_set_rx_mode = axienet_set_multicast_list,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = axienet_poll_controller,
+#endif
+};
+
+/**
+ * axienet_ethtools_get_drvinfo - Get various Axi Ethernet driver information.
+ * @ndev:	Pointer to net_device structure
+ * @ed:		Pointer to ethtool_drvinfo structure
+ *
+ * This implements ethtool command for getting the driver information.
+ * Issue "ethtool -i ethX" under linux prompt to execute this function.
+ */
+static void axienet_ethtools_get_drvinfo(struct net_device *ndev,
+					 struct ethtool_drvinfo *ed)
+{
+	strscpy(ed->driver, DRIVER_NAME, sizeof(ed->driver));
+	strscpy(ed->version, DRIVER_VERSION, sizeof(ed->version));
+}
+
+/**
+ * axienet_ethtools_get_regs_len - Get the total regs length present in the
+ *				   AxiEthernet core.
+ * @ndev:	Pointer to net_device structure
+ *
+ * This implements ethtool command for getting the total register length
+ * information.
+ *
+ * Return: the total regs length
+ */
+static int axienet_ethtools_get_regs_len(struct net_device *ndev)
+{
+	return sizeof(u32) * AXIENET_REGS_N;
+}
+
+/**
+ * axienet_ethtools_get_regs - Dump the contents of all registers present
+ *			       in AxiEthernet core.
+ * @ndev:	Pointer to net_device structure
+ * @regs:	Pointer to ethtool_regs structure
+ * @ret:	Void pointer used to return the contents of the registers.
+ *
+ * This implements ethtool command for getting the Axi Ethernet register dump.
+ * Issue "ethtool -d ethX" to execute this function.
+ */
+static void axienet_ethtools_get_regs(struct net_device *ndev,
+				      struct ethtool_regs *regs, void *ret)
+{
+	u32 *data = (u32 *)ret;
+	size_t len = sizeof(u32) * AXIENET_REGS_N;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	regs->version = 0;
+	regs->len = len;
+
+	memset(data, 0, len);
+	data[0] = axienet_ior(lp, XAE_RAF_OFFSET);
+	data[1] = axienet_ior(lp, XAE_TPF_OFFSET);
+	data[2] = axienet_ior(lp, XAE_IFGP_OFFSET);
+	data[3] = axienet_ior(lp, XAE_IS_OFFSET);
+	data[4] = axienet_ior(lp, XAE_IP_OFFSET);
+	data[5] = axienet_ior(lp, XAE_IE_OFFSET);
+	data[6] = axienet_ior(lp, XAE_TTAG_OFFSET);
+	data[7] = axienet_ior(lp, XAE_RTAG_OFFSET);
+	data[8] = axienet_ior(lp, XAE_UAWL_OFFSET);
+	data[9] = axienet_ior(lp, XAE_UAWU_OFFSET);
+	data[10] = axienet_ior(lp, XAE_TPID0_OFFSET);
+	data[11] = axienet_ior(lp, XAE_TPID1_OFFSET);
+	data[12] = axienet_ior(lp, XAE_PPST_OFFSET);
+	data[13] = axienet_ior(lp, XAE_RCW0_OFFSET);
+	data[14] = axienet_ior(lp, XAE_RCW1_OFFSET);
+	data[15] = axienet_ior(lp, XAE_TC_OFFSET);
+	data[16] = axienet_ior(lp, XAE_FCC_OFFSET);
+	data[17] = axienet_ior(lp, XAE_EMMC_OFFSET);
+	data[18] = axienet_ior(lp, XAE_PHYC_OFFSET);
+	data[19] = axienet_ior(lp, XAE_MDIO_MC_OFFSET);
+	data[20] = axienet_ior(lp, XAE_MDIO_MCR_OFFSET);
+	data[21] = axienet_ior(lp, XAE_MDIO_MWD_OFFSET);
+	data[22] = axienet_ior(lp, XAE_MDIO_MRD_OFFSET);
+	data[27] = axienet_ior(lp, XAE_UAW0_OFFSET);
+	data[28] = axienet_ior(lp, XAE_UAW1_OFFSET);
+	data[29] = axienet_ior(lp, XAE_FMI_OFFSET);
+	data[30] = axienet_ior(lp, XAE_AF0_OFFSET);
+	data[31] = axienet_ior(lp, XAE_AF1_OFFSET);
+	data[32] = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	data[33] = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
+	data[34] = axienet_dma_in32(lp, XAXIDMA_TX_CDESC_OFFSET);
+	data[35] = axienet_dma_in32(lp, XAXIDMA_TX_TDESC_OFFSET);
+	data[36] = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	data[37] = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
+	data[38] = axienet_dma_in32(lp, XAXIDMA_RX_CDESC_OFFSET);
+	data[39] = axienet_dma_in32(lp, XAXIDMA_RX_TDESC_OFFSET);
+}
+
+static void
+axienet_ethtools_get_ringparam(struct net_device *ndev,
+			       struct ethtool_ringparam *ering,
+			       struct kernel_ethtool_ringparam *kernel_ering,
+			       struct netlink_ext_ack *extack)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	ering->rx_max_pending = RX_BD_NUM_MAX;
+	ering->rx_mini_max_pending = 0;
+	ering->rx_jumbo_max_pending = 0;
+	ering->tx_max_pending = TX_BD_NUM_MAX;
+	ering->rx_pending = lp->rx_bd_num;
+	ering->rx_mini_pending = 0;
+	ering->rx_jumbo_pending = 0;
+	ering->tx_pending = lp->tx_bd_num;
+}
+
+static int
+axienet_ethtools_set_ringparam(struct net_device *ndev,
+			       struct ethtool_ringparam *ering,
+			       struct kernel_ethtool_ringparam *kernel_ering,
+			       struct netlink_ext_ack *extack)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (ering->rx_pending > RX_BD_NUM_MAX ||
+	    ering->rx_mini_pending ||
+	    ering->rx_jumbo_pending ||
+	    ering->tx_pending < TX_BD_NUM_MIN ||
+	    ering->tx_pending > TX_BD_NUM_MAX)
+		return -EINVAL;
+
+	if (netif_running(ndev))
+		return -EBUSY;
+
+	lp->rx_bd_num = ering->rx_pending;
+	lp->tx_bd_num = ering->tx_pending;
+	return 0;
+}
+
+/**
+ * axienet_ethtools_get_pauseparam - Get the pause parameter setting for
+ *				     Tx and Rx paths.
+ * @ndev:	Pointer to net_device structure
+ * @epauseparm:	Pointer to ethtool_pauseparam structure.
+ *
+ * This implements ethtool command for getting axi ethernet pause frame
+ * setting. Issue "ethtool -a ethX" to execute this function.
+ */
+static void
+axienet_ethtools_get_pauseparam(struct net_device *ndev,
+				struct ethtool_pauseparam *epauseparm)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	phylink_ethtool_get_pauseparam(lp->phylink, epauseparm);
+}
+
+/**
+ * axienet_ethtools_set_pauseparam - Set device pause parameter(flow control)
+ *				     settings.
+ * @ndev:	Pointer to net_device structure
+ * @epauseparm:Pointer to ethtool_pauseparam structure
+ *
+ * This implements ethtool command for enabling flow control on Rx and Tx
+ * paths. Issue "ethtool -A ethX tx on|off" under linux prompt to execute this
+ * function.
+ *
+ * Return: 0 on success, -EFAULT if device is running
+ */
+static int
+axienet_ethtools_set_pauseparam(struct net_device *ndev,
+				struct ethtool_pauseparam *epauseparm)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	return phylink_ethtool_set_pauseparam(lp->phylink, epauseparm);
+}
+
+/**
+ * axienet_ethtools_get_coalesce - Get DMA interrupt coalescing count.
+ * @ndev:	Pointer to net_device structure
+ * @ecoalesce:	Pointer to ethtool_coalesce structure
+ * @kernel_coal: ethtool CQE mode setting structure
+ * @extack:	extack for reporting error messages
+ *
+ * This implements ethtool command for getting the DMA interrupt coalescing
+ * count on Tx and Rx paths. Issue "ethtool -c ethX" under linux prompt to
+ * execute this function.
+ *
+ * Return: 0 always
+ */
+static int
+axienet_ethtools_get_coalesce(struct net_device *ndev,
+			      struct ethtool_coalesce *ecoalesce,
+			      struct kernel_ethtool_coalesce *kernel_coal,
+			      struct netlink_ext_ack *extack)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	ecoalesce->rx_max_coalesced_frames = lp->coalesce_count_rx;
+	ecoalesce->rx_coalesce_usecs = lp->coalesce_usec_rx;
+	ecoalesce->tx_max_coalesced_frames = lp->coalesce_count_tx;
+	ecoalesce->tx_coalesce_usecs = lp->coalesce_usec_tx;
+	return 0;
+}
+
+/**
+ * axienet_ethtools_set_coalesce - Set DMA interrupt coalescing count.
+ * @ndev:	Pointer to net_device structure
+ * @ecoalesce:	Pointer to ethtool_coalesce structure
+ * @kernel_coal: ethtool CQE mode setting structure
+ * @extack:	extack for reporting error messages
+ *
+ * This implements ethtool command for setting the DMA interrupt coalescing
+ * count on Tx and Rx paths. Issue "ethtool -C ethX rx-frames 5" under linux
+ * prompt to execute this function.
+ *
+ * Return: 0, on success, Non-zero error value on failure.
+ */
+static int
+axienet_ethtools_set_coalesce(struct net_device *ndev,
+			      struct ethtool_coalesce *ecoalesce,
+			      struct kernel_ethtool_coalesce *kernel_coal,
+			      struct netlink_ext_ack *extack)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		netdev_err(ndev,
+			   "Please stop netif before applying configuration\n");
+		return -EFAULT;
+	}
+
+	if (ecoalesce->rx_max_coalesced_frames)
+		lp->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames;
+	if (ecoalesce->rx_coalesce_usecs)
+		lp->coalesce_usec_rx = ecoalesce->rx_coalesce_usecs;
+	if (ecoalesce->tx_max_coalesced_frames)
+		lp->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames;
+	if (ecoalesce->tx_coalesce_usecs)
+		lp->coalesce_usec_tx = ecoalesce->tx_coalesce_usecs;
+
+	return 0;
+}
+
+static int
+axienet_ethtools_get_link_ksettings(struct net_device *ndev,
+				    struct ethtool_link_ksettings *cmd)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	return phylink_ethtool_ksettings_get(lp->phylink, cmd);
+}
+
+static int
+axienet_ethtools_set_link_ksettings(struct net_device *ndev,
+				    const struct ethtool_link_ksettings *cmd)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	return phylink_ethtool_ksettings_set(lp->phylink, cmd);
+}
+
+static int axienet_ethtools_nway_reset(struct net_device *dev)
+{
+	struct axienet_local *lp = netdev_priv(dev);
+
+	return phylink_ethtool_nway_reset(lp->phylink);
+}
+
+static const struct ethtool_ops axienet_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_MAX_FRAMES |
+				     ETHTOOL_COALESCE_USECS,
+	.get_drvinfo    = axienet_ethtools_get_drvinfo,
+	.get_regs_len   = axienet_ethtools_get_regs_len,
+	.get_regs       = axienet_ethtools_get_regs,
+	.get_link       = ethtool_op_get_link,
+	.get_ringparam	= axienet_ethtools_get_ringparam,
+	.set_ringparam	= axienet_ethtools_set_ringparam,
+	.get_pauseparam = axienet_ethtools_get_pauseparam,
+	.set_pauseparam = axienet_ethtools_set_pauseparam,
+	.get_coalesce   = axienet_ethtools_get_coalesce,
+	.set_coalesce   = axienet_ethtools_set_coalesce,
+	.get_link_ksettings = axienet_ethtools_get_link_ksettings,
+	.set_link_ksettings = axienet_ethtools_set_link_ksettings,
+	.nway_reset	= axienet_ethtools_nway_reset,
+};
+
+static struct axienet_local *pcs_to_axienet_local(struct phylink_pcs *pcs)
+{
+	return container_of(pcs, struct axienet_local, pcs);
+}
+
+static void axienet_pcs_get_state(struct phylink_pcs *pcs,
+				  struct phylink_link_state *state)
+{
+	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
+
+	phylink_mii_c22_pcs_get_state(pcs_phy, state);
+}
+
+static void axienet_pcs_an_restart(struct phylink_pcs *pcs)
+{
+	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
+
+	phylink_mii_c22_pcs_an_restart(pcs_phy);
+}
+
+static int axienet_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
+			      phy_interface_t interface,
+			      const unsigned long *advertising,
+			      bool permit_pause_to_mac)
+{
+	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
+	struct net_device *ndev = pcs_to_axienet_local(pcs)->ndev;
+	struct axienet_local *lp = netdev_priv(ndev);
+	int ret;
+
+	if (lp->switch_x_sgmii) {
+		ret = mdiodev_write(pcs_phy, XLNX_MII_STD_SELECT_REG,
+				    interface == PHY_INTERFACE_MODE_SGMII ?
+					XLNX_MII_STD_SELECT_SGMII : 0);
+		if (ret < 0) {
+			netdev_warn(ndev,
+				    "Failed to switch PHY interface: %d\n",
+				    ret);
+			return ret;
+		}
+	}
+
+	ret = phylink_mii_c22_pcs_config(pcs_phy, interface, advertising,
+					 neg_mode);
+	if (ret < 0)
+		netdev_warn(ndev, "Failed to configure PCS: %d\n", ret);
+
+	return ret;
+}
+
+static const struct phylink_pcs_ops axienet_pcs_ops = {
+	.pcs_get_state = axienet_pcs_get_state,
+	.pcs_config = axienet_pcs_config,
+	.pcs_an_restart = axienet_pcs_an_restart,
+};
+
+static struct phylink_pcs *axienet_mac_select_pcs(struct phylink_config *config,
+						  phy_interface_t interface)
+{
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (interface == PHY_INTERFACE_MODE_1000BASEX ||
+	    interface ==  PHY_INTERFACE_MODE_SGMII)
+		return &lp->pcs;
+
+	return NULL;
+}
+
+static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
+			       const struct phylink_link_state *state)
+{
+	/* nothing meaningful to do */
+}
+
+static void axienet_mac_link_down(struct phylink_config *config,
+				  unsigned int mode,
+				  phy_interface_t interface)
+{
+	/* nothing meaningful to do */
+}
+
+static void axienet_mac_link_up(struct phylink_config *config,
+				struct phy_device *phy,
+				unsigned int mode, phy_interface_t interface,
+				int speed, int duplex,
+				bool tx_pause, bool rx_pause)
+{
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct axienet_local *lp = netdev_priv(ndev);
+	u32 emmc_reg, fcc_reg;
+
+	emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET);
+	emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK;
+
+	switch (speed) {
+	case SPEED_1000:
+		emmc_reg |= XAE_EMMC_LINKSPD_1000;
+		break;
+	case SPEED_100:
+		emmc_reg |= XAE_EMMC_LINKSPD_100;
+		break;
+	case SPEED_10:
+		emmc_reg |= XAE_EMMC_LINKSPD_10;
+		break;
+	default:
+		dev_err(&ndev->dev,
+			"Speed other than 10, 100 or 1Gbps is not supported\n");
+		break;
+	}
+
+	axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg);
+
+	fcc_reg = axienet_ior(lp, XAE_FCC_OFFSET);
+	if (tx_pause)
+		fcc_reg |= XAE_FCC_FCTX_MASK;
+	else
+		fcc_reg &= ~XAE_FCC_FCTX_MASK;
+	if (rx_pause)
+		fcc_reg |= XAE_FCC_FCRX_MASK;
+	else
+		fcc_reg &= ~XAE_FCC_FCRX_MASK;
+	axienet_iow(lp, XAE_FCC_OFFSET, fcc_reg);
+}
+
+static const struct phylink_mac_ops axienet_phylink_ops = {
+	.mac_select_pcs = axienet_mac_select_pcs,
+	.mac_config = axienet_mac_config,
+	.mac_link_down = axienet_mac_link_down,
+	.mac_link_up = axienet_mac_link_up,
+};
+
+/**
+ * axienet_dma_err_handler - Work queue task for Axi DMA Error
+ * @work:	pointer to work_struct
+ *
+ * Resets the Axi DMA and Axi Ethernet devices, and reconfigures the
+ * Tx/Rx BDs.
+ */
+static void axienet_dma_err_handler(struct work_struct *work)
+{
+	u32 i;
+	u32 axienet_status;
+	struct axidma_bd *cur_p;
+	struct axienet_local *lp = container_of(work, struct axienet_local,
+						dma_err_task);
+	struct net_device *ndev = lp->ndev;
+
+	napi_disable(&lp->napi_tx);
+	napi_disable(&lp->napi_rx);
+
+	axienet_setoptions(ndev, lp->options &
+			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
+
+	axienet_dma_stop(lp);
+
+	for (i = 0; i < lp->tx_bd_num; i++) {
+		cur_p = &lp->tx_bd_v[i];
+		if (cur_p->cntrl) {
+			dma_addr_t addr = desc_get_phys_addr(lp, cur_p);
+
+			dma_unmap_single(lp->dev, addr,
+					 (cur_p->cntrl &
+					  XAXIDMA_BD_CTRL_LENGTH_MASK),
+					 DMA_TO_DEVICE);
+		}
+		if (cur_p->skb)
+			dev_kfree_skb_irq(cur_p->skb);
+		cur_p->phys = 0;
+		cur_p->phys_msb = 0;
+		cur_p->cntrl = 0;
+		cur_p->status = 0;
+		cur_p->app0 = 0;
+		cur_p->app1 = 0;
+		cur_p->app2 = 0;
+		cur_p->app3 = 0;
+		cur_p->app4 = 0;
+		cur_p->skb = NULL;
+	}
+
+	for (i = 0; i < lp->rx_bd_num; i++) {
+		cur_p = &lp->rx_bd_v[i];
+		cur_p->status = 0;
+		cur_p->app0 = 0;
+		cur_p->app1 = 0;
+		cur_p->app2 = 0;
+		cur_p->app3 = 0;
+		cur_p->app4 = 0;
+	}
+
+	lp->tx_bd_ci = 0;
+	lp->tx_bd_tail = 0;
+	lp->rx_bd_ci = 0;
+
+	axienet_dma_start(lp);
+
+	axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET);
+	axienet_status &= ~XAE_RCW1_RX_MASK;
+	axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status);
+
+	axienet_status = axienet_ior(lp, XAE_IP_OFFSET);
+	if (axienet_status & XAE_INT_RXRJECT_MASK)
+		axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK);
+	axienet_iow(lp, XAE_IE_OFFSET, lp->eth_irq > 0 ?
+		    XAE_INT_RECV_ERROR_MASK : 0);
+	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);
+
+	/* Sync default options with HW but leave receiver and
+	 * transmitter disabled.
+	 */
+	axienet_setoptions(ndev, lp->options &
+			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
+	axienet_set_mac_address(ndev, NULL);
+	axienet_set_multicast_list(ndev);
+	axienet_setoptions(ndev, lp->options);
+	napi_enable(&lp->napi_rx);
+	napi_enable(&lp->napi_tx);
+}
+
+/**
+ * axienet_probe - Axi Ethernet probe function.
+ * @pdev:	Pointer to platform device structure.
+ *
+ * Return: 0, on success
+ *	    Non-zero error value on failure.
+ *
+ * This is the probe routine for Axi Ethernet driver. This is called before
+ * any other driver routines are invoked. It allocates and sets up the Ethernet
+ * device. Parses through device tree and populates fields of
+ * axienet_local. It registers the Ethernet device.
+ */
+static int axienet_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *np;
+	struct axienet_local *lp;
+	struct net_device *ndev;
+	struct resource *ethres;
+	u8 mac_addr[ETH_ALEN];
+	int addr_width = 32;
+	u32 value;
+
+	ndev = alloc_etherdev(sizeof(*lp));
+	if (!ndev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ndev);
+
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	ndev->flags &= ~IFF_MULTICAST;  /* clear multicast */
+	ndev->features = NETIF_F_SG;
+	ndev->netdev_ops = &axienet_netdev_ops;
+	ndev->ethtool_ops = &axienet_ethtool_ops;
+
+	/* MTU range: 64 - 9000 */
+	ndev->min_mtu = 64;
+	ndev->max_mtu = XAE_JUMBO_MTU;
+
+	lp = netdev_priv(ndev);
+	lp->ndev = ndev;
+	lp->dev = &pdev->dev;
+	lp->options = XAE_OPTION_DEFAULTS;
+	lp->rx_bd_num = RX_BD_NUM_DEFAULT;
+	lp->tx_bd_num = TX_BD_NUM_DEFAULT;
+
+	u64_stats_init(&lp->rx_stat_sync);
+	u64_stats_init(&lp->tx_stat_sync);
+
+	netif_napi_add(ndev, &lp->napi_rx, axienet_rx_poll);
+	netif_napi_add(ndev, &lp->napi_tx, axienet_tx_poll);
+
+	lp->axi_clk = devm_clk_get_optional(&pdev->dev, "s_axi_lite_clk");
+	if (!lp->axi_clk) {
+		/* For backward compatibility, if named AXI clock is not present,
+		 * treat the first clock specified as the AXI clock.
+		 */
+		lp->axi_clk = devm_clk_get_optional(&pdev->dev, NULL);
+	}
+	if (IS_ERR(lp->axi_clk)) {
+		ret = PTR_ERR(lp->axi_clk);
+		goto free_netdev;
+	}
+	ret = clk_prepare_enable(lp->axi_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable AXI clock: %d\n", ret);
+		goto free_netdev;
+	}
+
+	lp->misc_clks[0].id = "axis_clk";
+	lp->misc_clks[1].id = "ref_clk";
+	lp->misc_clks[2].id = "mgt_clk";
+
+	ret = devm_clk_bulk_get_optional(&pdev->dev, XAE_NUM_MISC_CLOCKS, lp->misc_clks);
+	if (ret)
+		goto cleanup_clk;
+
+	ret = clk_bulk_prepare_enable(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
+	if (ret)
+		goto cleanup_clk;
+
+	/* Map device registers */
+	lp->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &ethres);
+	if (IS_ERR(lp->regs)) {
+		ret = PTR_ERR(lp->regs);
+		goto cleanup_clk;
+	}
+	lp->regs_start = ethres->start;
+
+	/* Setup checksum offload, but default to off if not specified */
+	lp->features = 0;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,txcsum", &value);
+	if (!ret) {
+		switch (value) {
+		case 1:
+			lp->csum_offload_on_tx_path =
+				XAE_FEATURE_PARTIAL_TX_CSUM;
+			lp->features |= XAE_FEATURE_PARTIAL_TX_CSUM;
+			/* Can checksum TCP/UDP over IPv4. */
+			ndev->features |= NETIF_F_IP_CSUM;
+			break;
+		case 2:
+			lp->csum_offload_on_tx_path =
+				XAE_FEATURE_FULL_TX_CSUM;
+			lp->features |= XAE_FEATURE_FULL_TX_CSUM;
+			/* Can checksum TCP/UDP over IPv4. */
+			ndev->features |= NETIF_F_IP_CSUM;
+			break;
+		default:
+			lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD;
+		}
+	}
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,rxcsum", &value);
+	if (!ret) {
+		switch (value) {
+		case 1:
+			lp->csum_offload_on_rx_path =
+				XAE_FEATURE_PARTIAL_RX_CSUM;
+			lp->features |= XAE_FEATURE_PARTIAL_RX_CSUM;
+			break;
+		case 2:
+			lp->csum_offload_on_rx_path =
+				XAE_FEATURE_FULL_RX_CSUM;
+			lp->features |= XAE_FEATURE_FULL_RX_CSUM;
+			break;
+		default:
+			lp->csum_offload_on_rx_path = XAE_NO_CSUM_OFFLOAD;
+		}
+	}
+	/* For supporting jumbo frames, the Axi Ethernet hardware must have
+	 * a larger Rx/Tx Memory. Typically, the size must be large so that
+	 * we can enable jumbo option and start supporting jumbo frames.
+	 * Here we check for memory allocated for Rx/Tx in the hardware from
+	 * the device-tree and accordingly set flags.
+	 */
+	of_property_read_u32(pdev->dev.of_node, "xlnx,rxmem", &lp->rxmem);
+
+	lp->switch_x_sgmii = of_property_read_bool(pdev->dev.of_node,
+						   "xlnx,switch-x-sgmii");
+
+	/* Start with the proprietary, and broken phy_type */
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,phy-type", &value);
+	if (!ret) {
+		netdev_warn(ndev, "Please upgrade your device tree binary blob to use phy-mode");
+		switch (value) {
+		case XAE_PHY_TYPE_MII:
+			lp->phy_mode = PHY_INTERFACE_MODE_MII;
+			break;
+		case XAE_PHY_TYPE_GMII:
+			lp->phy_mode = PHY_INTERFACE_MODE_GMII;
+			break;
+		case XAE_PHY_TYPE_RGMII_2_0:
+			lp->phy_mode = PHY_INTERFACE_MODE_RGMII_ID;
+			break;
+		case XAE_PHY_TYPE_SGMII:
+			lp->phy_mode = PHY_INTERFACE_MODE_SGMII;
+			break;
+		case XAE_PHY_TYPE_1000BASE_X:
+			lp->phy_mode = PHY_INTERFACE_MODE_1000BASEX;
+			break;
+		default:
+			ret = -EINVAL;
+			goto cleanup_clk;
+		}
+	} else {
+		ret = of_get_phy_mode(pdev->dev.of_node, &lp->phy_mode);
+		if (ret)
+			goto cleanup_clk;
+	}
+	if (lp->switch_x_sgmii && lp->phy_mode != PHY_INTERFACE_MODE_SGMII &&
+	    lp->phy_mode != PHY_INTERFACE_MODE_1000BASEX) {
+		dev_err(&pdev->dev, "xlnx,switch-x-sgmii only supported with SGMII or 1000BaseX\n");
+		ret = -EINVAL;
+		goto cleanup_clk;
+	}
+
+	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
+	np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
+	if (np) {
+		struct resource dmares;
+
+		ret = of_address_to_resource(np, 0, &dmares);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"unable to get DMA resource\n");
+			of_node_put(np);
+			goto cleanup_clk;
+		}
+		lp->dma_regs = devm_ioremap_resource(&pdev->dev,
+						     &dmares);
+		lp->rx_irq = irq_of_parse_and_map(np, 1);
+		lp->tx_irq = irq_of_parse_and_map(np, 0);
+		of_node_put(np);
+		lp->eth_irq = platform_get_irq_optional(pdev, 0);
+	} else {
+		/* Check for these resources directly on the Ethernet node. */
+		lp->dma_regs = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
+		lp->rx_irq = platform_get_irq(pdev, 1);
+		lp->tx_irq = platform_get_irq(pdev, 0);
+		lp->eth_irq = platform_get_irq_optional(pdev, 2);
+	}
+	if (IS_ERR(lp->dma_regs)) {
+		dev_err(&pdev->dev, "could not map DMA regs\n");
+		ret = PTR_ERR(lp->dma_regs);
+		goto cleanup_clk;
+	}
+	if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) {
+		dev_err(&pdev->dev, "could not determine irqs\n");
+		ret = -ENOMEM;
+		goto cleanup_clk;
+	}
+
+	/* Reset core now that clocks are enabled, prior to accessing MDIO */
+	ret = __axienet_device_reset(lp);
+	if (ret)
+		goto cleanup_clk;
+
+	/* Autodetect the need for 64-bit DMA pointers.
+	 * When the IP is configured for a bus width bigger than 32 bits,
+	 * writing the MSB registers is mandatory, even if they are all 0.
+	 * We can detect this case by writing all 1's to one such register
+	 * and see if that sticks: when the IP is configured for 32 bits
+	 * only, those registers are RES0.
+	 * Those MSB registers were introduced in IP v7.1, which we check first.
+	 */
+	if ((axienet_ior(lp, XAE_ID_OFFSET) >> 24) >= 0x9) {
+		void __iomem *desc = lp->dma_regs + XAXIDMA_TX_CDESC_OFFSET + 4;
+
+		iowrite32(0x0, desc);
+		if (ioread32(desc) == 0) {	/* sanity check */
+			iowrite32(0xffffffff, desc);
+			if (ioread32(desc) > 0) {
+				lp->features |= XAE_FEATURE_DMA_64BIT;
+				addr_width = 64;
+				dev_info(&pdev->dev,
+					 "autodetected 64-bit DMA range\n");
+			}
+			iowrite32(0x0, desc);
+		}
+	}
+	if (!IS_ENABLED(CONFIG_64BIT) && lp->features & XAE_FEATURE_DMA_64BIT) {
+		dev_err(&pdev->dev, "64-bit addressable DMA is not compatible with 32-bit archecture\n");
+		ret = -EINVAL;
+		goto cleanup_clk;
+	}
+
+	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(addr_width));
+	if (ret) {
+		dev_err(&pdev->dev, "No suitable DMA available\n");
+		goto cleanup_clk;
+	}
+
+	/* Check for Ethernet core IRQ (optional) */
+	if (lp->eth_irq <= 0)
+		dev_info(&pdev->dev, "Ethernet core IRQ not defined\n");
+
+	/* Retrieve the MAC address */
+	ret = of_get_mac_address(pdev->dev.of_node, mac_addr);
+	if (!ret) {
+		axienet_set_mac_address(ndev, mac_addr);
+	} else {
+		dev_warn(&pdev->dev, "could not find MAC address property: %d\n",
+			 ret);
+		axienet_set_mac_address(ndev, NULL);
+	}
+
+	lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
+	lp->coalesce_usec_rx = XAXIDMA_DFT_RX_USEC;
+	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
+	lp->coalesce_usec_tx = XAXIDMA_DFT_TX_USEC;
+
+	ret = axienet_mdio_setup(lp);
+	if (ret)
+		dev_warn(&pdev->dev,
+			 "error registering MDIO bus: %d\n", ret);
+
+	if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII ||
+	    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
+		np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0);
+		if (!np) {
+			/* Deprecated: Always use "pcs-handle" for pcs_phy.
+			 * Falling back to "phy-handle" here is only for
+			 * backward compatibility with old device trees.
+			 */
+			np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
+		}
+		if (!np) {
+			dev_err(&pdev->dev, "pcs-handle (preferred) or phy-handle required for 1000BaseX/SGMII\n");
+			ret = -EINVAL;
+			goto cleanup_mdio;
+		}
+		lp->pcs_phy = of_mdio_find_device(np);
+		if (!lp->pcs_phy) {
+			ret = -EPROBE_DEFER;
+			of_node_put(np);
+			goto cleanup_mdio;
+		}
+		of_node_put(np);
+		lp->pcs.ops = &axienet_pcs_ops;
+		lp->pcs.neg_mode = true;
+		lp->pcs.poll = true;
+	}
+
+	lp->phylink_config.dev = &ndev->dev;
+	lp->phylink_config.type = PHYLINK_NETDEV;
+	lp->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
+		MAC_10FD | MAC_100FD | MAC_1000FD;
+
+	__set_bit(lp->phy_mode, lp->phylink_config.supported_interfaces);
+	if (lp->switch_x_sgmii) {
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  lp->phylink_config.supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  lp->phylink_config.supported_interfaces);
+	}
+
+	lp->phylink = phylink_create(&lp->phylink_config, pdev->dev.fwnode,
+				     lp->phy_mode,
+				     &axienet_phylink_ops);
+	if (IS_ERR(lp->phylink)) {
+		ret = PTR_ERR(lp->phylink);
+		dev_err(&pdev->dev, "phylink_create error (%i)\n", ret);
+		goto cleanup_mdio;
+	}
+
+	ret = register_netdev(lp->ndev);
+	if (ret) {
+		dev_err(lp->dev, "register_netdev() error (%i)\n", ret);
+		goto cleanup_phylink;
+	}
+
+	return 0;
+
+cleanup_phylink:
+	phylink_destroy(lp->phylink);
+
+cleanup_mdio:
+	if (lp->pcs_phy)
+		put_device(&lp->pcs_phy->dev);
+	if (lp->mii_bus)
+		axienet_mdio_teardown(lp);
+cleanup_clk:
+	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
+	clk_disable_unprepare(lp->axi_clk);
+
+free_netdev:
+	free_netdev(ndev);
+
+	return ret;
+}
+
+static int axienet_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	unregister_netdev(ndev);
+
+	if (lp->phylink)
+		phylink_destroy(lp->phylink);
+
+	if (lp->pcs_phy)
+		put_device(&lp->pcs_phy->dev);
+
+	axienet_mdio_teardown(lp);
+
+	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
+	clk_disable_unprepare(lp->axi_clk);
+
+	free_netdev(ndev);
+
+	return 0;
+}
+
+static void axienet_shutdown(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+
+	rtnl_lock();
+	netif_device_detach(ndev);
+
+	if (netif_running(ndev))
+		dev_close(ndev);
+
+	rtnl_unlock();
+}
+
+static int axienet_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	if (!netif_running(ndev))
+		return 0;
+
+	netif_device_detach(ndev);
+
+	rtnl_lock();
+	axienet_stop(ndev);
+	rtnl_unlock();
+
+	return 0;
+}
+
+static int axienet_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	if (!netif_running(ndev))
+		return 0;
+
+	rtnl_lock();
+	axienet_open(ndev);
+	rtnl_unlock();
+
+	netif_device_attach(ndev);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(axienet_pm_ops,
+				axienet_suspend, axienet_resume);
+
+static struct platform_driver axienet_driver = {
+	.probe = axienet_probe,
+	.remove = axienet_remove,
+	.shutdown = axienet_shutdown,
+	.driver = {
+		 .name = "xilinx_axienet",
+		 .pm = &axienet_pm_ops,
+		 .of_match_table = axienet_of_match,
+	},
+};
+
+module_platform_driver(axienet_driver);
+
+MODULE_DESCRIPTION("Xilinx Axi Ethernet driver");
+MODULE_AUTHOR("Xilinx");
+MODULE_LICENSE("GPL");