Merging upstream version 6.7.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 69 insertions, 8 deletions

diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 3b0c5f1774..e0d26148df 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -24,6 +24,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
 #include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/net_tstamp.h>
@@ -63,7 +64,15 @@
 
 #define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
 #define REGS_SIZE		0x1000
-#define MAX_MRU			1536 /* 0x600 */
+
+/* MRU is said to be 14320 in a code dump, the SW manual says that
+ * MRU/MTU is 16320 and includes VLAN and ethernet headers.
+ * See "IXP400 Software Programmer's Guide" section 10.3.2, page 161.
+ *
+ * FIXME: we have chosen the safe default (14320) but if you can test
+ * jumboframes, experiment with 16320 and see what happens!
+ */
+#define MAX_MRU			(14320 - VLAN_ETH_HLEN)
 #define RX_BUFF_SIZE		ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
 
 #define NAPI_WEIGHT		16
@@ -154,7 +163,6 @@ typedef void buffer_t;
 
 /* Information about built-in Ethernet MAC interfaces */
 struct eth_plat_info {
-	u8 phy;		/* MII PHY ID, 0 - 31 */
 	u8 rxq;		/* configurable, currently 0 - 31 only */
 	u8 txreadyq;
 	u8 hwaddr[ETH_ALEN];
@@ -714,9 +722,9 @@ static int eth_poll(struct napi_struct *napi, int budget)
 			napi_complete(napi);
 			qmgr_enable_irq(rxq);
 			if (!qmgr_stat_below_low_watermark(rxq) &&
-			    napi_reschedule(napi)) { /* not empty again */
+			    napi_schedule(napi)) { /* not empty again */
 #if DEBUG_RX
-				netdev_debug(dev, "eth_poll napi_reschedule succeeded\n");
+				netdev_debug(dev, "eth_poll napi_schedule succeeded\n");
 #endif
 				qmgr_disable_irq(rxq);
 				continue;
@@ -1182,6 +1190,54 @@ static void destroy_queues(struct port *port)
 	}
 }
 
+static int ixp4xx_do_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct port *port = netdev_priv(dev);
+	struct npe *npe = port->npe;
+	int framesize, chunks;
+	struct msg msg = {};
+
+	/* adjust for ethernet headers */
+	framesize = new_mtu + VLAN_ETH_HLEN;
+	/* max rx/tx 64 byte chunks */
+	chunks = DIV_ROUND_UP(framesize, 64);
+
+	msg.cmd = NPE_SETMAXFRAMELENGTHS;
+	msg.eth_id = port->id;
+
+	/* Firmware wants to know buffer size in 64 byte chunks */
+	msg.byte2 = chunks << 8;
+	msg.byte3 = chunks << 8;
+
+	msg.byte4 = msg.byte6 = framesize >> 8;
+	msg.byte5 = msg.byte7 = framesize & 0xff;
+
+	if (npe_send_recv_message(npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
+		return -EIO;
+	netdev_dbg(dev, "set MTU on NPE %s to %d bytes\n",
+		   npe_name(npe), new_mtu);
+
+	return 0;
+}
+
+static int ixp4xx_eth_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int ret;
+
+	/* MTU can only be changed when the interface is up. We also
+	 * set the MTU from dev->mtu when opening the device.
+	 */
+	if (dev->flags & IFF_UP) {
+		ret = ixp4xx_do_change_mtu(dev, new_mtu);
+		if (ret < 0)
+			return ret;
+	}
+
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
 static int eth_open(struct net_device *dev)
 {
 	struct port *port = netdev_priv(dev);
@@ -1232,6 +1288,8 @@ static int eth_open(struct net_device *dev)
 	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
 		return -EIO;
 
+	ixp4xx_do_change_mtu(dev, dev->mtu);
+
 	if ((err = request_queues(port)) != 0)
 		return err;
 
@@ -1374,6 +1432,7 @@ static int eth_close(struct net_device *dev)
 static const struct net_device_ops ixp4xx_netdev_ops = {
 	.ndo_open = eth_open,
 	.ndo_stop = eth_close,
+	.ndo_change_mtu = ixp4xx_eth_change_mtu,
 	.ndo_start_xmit = eth_xmit,
 	.ndo_set_rx_mode = eth_set_mcast_list,
 	.ndo_eth_ioctl = eth_ioctl,
@@ -1488,6 +1547,9 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
 	ndev->dev.dma_mask = dev->dma_mask;
 	ndev->dev.coherent_dma_mask = dev->coherent_dma_mask;
 
+	ndev->min_mtu = ETH_MIN_MTU;
+	ndev->max_mtu = MAX_MRU;
+
 	netif_napi_add_weight(ndev, &port->napi, eth_poll, NAPI_WEIGHT);
 
 	if (!(port->npe = npe_request(NPE_ID(port->id))))
@@ -1520,7 +1582,7 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
 	if ((err = register_netdev(ndev)))
 		goto err_phy_dis;
 
-	netdev_info(ndev, "%s: MII PHY %i on %s\n", ndev->name, plat->phy,
+	netdev_info(ndev, "%s: MII PHY %s on %s\n", ndev->name, phydev_name(phydev),
 		    npe_name(port->npe));
 
 	return 0;
@@ -1533,7 +1595,7 @@ err_free_mem:
 	return err;
 }
 
-static int ixp4xx_eth_remove(struct platform_device *pdev)
+static void ixp4xx_eth_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct phy_device *phydev = ndev->phydev;
@@ -1544,7 +1606,6 @@ static int ixp4xx_eth_remove(struct platform_device *pdev)
 	ixp4xx_mdio_remove();
 	npe_port_tab[NPE_ID(port->id)] = NULL;
 	npe_release(port->npe);
-	return 0;
 }
 
 static const struct of_device_id ixp4xx_eth_of_match[] = {
@@ -1560,7 +1621,7 @@ static struct platform_driver ixp4xx_eth_driver = {
 		.of_match_table = of_match_ptr(ixp4xx_eth_of_match),
 	},
 	.probe		= ixp4xx_eth_probe,
-	.remove		= ixp4xx_eth_remove,
+	.remove_new	= ixp4xx_eth_remove,
 };
 module_platform_driver(ixp4xx_eth_driver);