Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 20 insertions, 24 deletions

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 337899c697..1fa70427b2 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -57,14 +57,6 @@
 #define RTL8366RB_POWER_SAVE			0x15
 #define RTL8366RB_POWER_SAVE_ON			BIT(12)
 
-#define RTL_SUPPORTS_5000FULL			BIT(14)
-#define RTL_SUPPORTS_2500FULL			BIT(13)
-#define RTL_SUPPORTS_10000FULL			BIT(0)
-#define RTL_ADV_2500FULL			BIT(7)
-#define RTL_LPADV_10000FULL			BIT(11)
-#define RTL_LPADV_5000FULL			BIT(6)
-#define RTL_LPADV_2500FULL			BIT(5)
-
 #define RTL9000A_GINMR				0x14
 #define RTL9000A_GINMR_LINK_STATUS		BIT(4)
 
@@ -676,11 +668,11 @@ static int rtl822x_get_features(struct phy_device *phydev)
 		return val;
 
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-			 phydev->supported, val & RTL_SUPPORTS_2500FULL);
+			 phydev->supported, val & MDIO_PMA_SPEED_2_5G);
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
-			 phydev->supported, val & RTL_SUPPORTS_5000FULL);
+			 phydev->supported, val & MDIO_PMA_SPEED_5G);
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-			 phydev->supported, val & RTL_SUPPORTS_10000FULL);
+			 phydev->supported, val & MDIO_SPEED_10G);
 
 	return genphy_read_abilities(phydev);
 }
@@ -690,14 +682,12 @@ static int rtl822x_config_aneg(struct phy_device *phydev)
 	int ret = 0;
 
 	if (phydev->autoneg == AUTONEG_ENABLE) {
-		u16 adv2500 = 0;
-
-		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-				      phydev->advertising))
-			adv2500 = RTL_ADV_2500FULL;
+		u16 adv = linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising);
 
 		ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
-					       RTL_ADV_2500FULL, adv2500);
+					       MDIO_AN_10GBT_CTRL_ADV2_5G |
+					       MDIO_AN_10GBT_CTRL_ADV5G,
+					       adv);
 		if (ret < 0)
 			return ret;
 	}
@@ -715,12 +705,8 @@ static int rtl822x_read_status(struct phy_device *phydev)
 		if (lpadv < 0)
 			return lpadv;
 
-		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-			phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL);
-		linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
-			phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL);
-		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-			phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
+		mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising,
+						  lpadv);
 	}
 
 	ret = genphy_read_status(phydev);
@@ -738,7 +724,7 @@ static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
 	val = phy_read(phydev, 0x13);
 	phy_write(phydev, RTL821x_PAGE_SELECT, 0);
 
-	return val >= 0 && val & RTL_SUPPORTS_2500FULL;
+	return val >= 0 && val & MDIO_PMA_SPEED_2_5G;
 }
 
 static int rtlgen_match_phy_device(struct phy_device *phydev)
@@ -1050,6 +1036,16 @@ static struct phy_driver realtek_drvs[] = {
 		.read_page      = rtl821x_read_page,
 		.write_page     = rtl821x_write_page,
 	}, {
+		PHY_ID_MATCH_EXACT(0x001cc862),
+		.name           = "RTL8251B 5Gbps PHY",
+		.get_features   = rtl822x_get_features,
+		.config_aneg    = rtl822x_config_aneg,
+		.read_status    = rtl822x_read_status,
+		.suspend        = genphy_suspend,
+		.resume         = rtlgen_resume,
+		.read_page      = rtl821x_read_page,
+		.write_page     = rtl821x_write_page,
+	}, {
 		PHY_ID_MATCH_EXACT(0x001cc961),
 		.name		= "RTL8366RB Gigabit Ethernet",
 		.config_init	= &rtl8366rb_config_init,