Adding upstream version 6.9.7.upstream/6.9.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 27 insertions, 22 deletions

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index c78bce19b..5d07585e5 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -595,7 +595,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.coldboot_cal_ftm = true,
 		.cbcal_restart_fw = false,
 		.fw_mem_mode = 0,
-		.num_vdevs = 16 + 1,
+		.num_vdevs = 3,
 		.num_peers = 512,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 9f4bf41a3..790277f54 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1231,14 +1231,7 @@ static int ath11k_mac_vif_setup_ps(struct ath11k_vif *arvif)
 
 	enable_ps = arvif->ps;
 
-	if (!arvif->is_started) {
-		/* mac80211 can update vif powersave state while disconnected.
-		 * Firmware doesn't behave nicely and consumes more power than
-		 * necessary if PS is disabled on a non-started vdev. Hence
-		 * force-enable PS for non-running vdevs.
-		 */
-		psmode = WMI_STA_PS_MODE_ENABLED;
-	} else if (enable_ps) {
+	if (enable_ps) {
 		psmode = WMI_STA_PS_MODE_ENABLED;
 		param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
 
@@ -7896,8 +7889,6 @@ ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 	struct ath11k_base *ab = ar->ab;
 	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
 	int ret;
-	struct cur_regulatory_info *reg_info;
-	enum ieee80211_ap_reg_power power_type;
 
 	mutex_lock(&ar->conf_mutex);
 
@@ -7908,17 +7899,6 @@ ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 	if (ath11k_wmi_supports_6ghz_cc_ext(ar) &&
 	    ctx->def.chan->band == NL80211_BAND_6GHZ &&
 	    arvif->vdev_type == WMI_VDEV_TYPE_STA) {
-		reg_info = &ab->reg_info_store[ar->pdev_idx];
-		power_type = vif->bss_conf.power_type;
-
-		ath11k_dbg(ab, ATH11K_DBG_MAC, "chanctx power type %d\n", power_type);
-
-		if (power_type == IEEE80211_REG_UNSET_AP) {
-			ret = -EINVAL;
-			goto out;
-		}
-
-		ath11k_reg_handle_chan_list(ab, reg_info, power_type);
 		arvif->chanctx = *ctx;
 		ath11k_mac_parse_tx_pwr_env(ar, vif, ctx);
 	}
@@ -9532,6 +9512,8 @@ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw,
 	struct ath11k *ar = hw->priv;
 	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
 	struct ath11k_sta *arsta = ath11k_sta_to_arsta(sta);
+	enum ieee80211_ap_reg_power power_type;
+	struct cur_regulatory_info *reg_info;
 	struct ath11k_peer *peer;
 	int ret = 0;
 
@@ -9611,6 +9593,29 @@ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw,
 				ath11k_warn(ar->ab, "Unable to authorize peer %pM vdev %d: %d\n",
 					    sta->addr, arvif->vdev_id, ret);
 		}
+
+		if (!ret &&
+		    ath11k_wmi_supports_6ghz_cc_ext(ar) &&
+		    arvif->vdev_type == WMI_VDEV_TYPE_STA &&
+		    arvif->chanctx.def.chan &&
+		    arvif->chanctx.def.chan->band == NL80211_BAND_6GHZ) {
+			reg_info = &ar->ab->reg_info_store[ar->pdev_idx];
+			power_type = vif->bss_conf.power_type;
+
+			if (power_type == IEEE80211_REG_UNSET_AP) {
+				ath11k_warn(ar->ab, "invalid power type %d\n",
+					    power_type);
+				ret = -EINVAL;
+			} else {
+				ret = ath11k_reg_handle_chan_list(ar->ab,
+								  reg_info,
+								  power_type);
+				if (ret)
+					ath11k_warn(ar->ab,
+						    "failed to handle chan list with power type %d\n",
+						    power_type);
+			}
+		}
 	} else if (old_state == IEEE80211_STA_AUTHORIZED &&
 		   new_state == IEEE80211_STA_ASSOC) {
 		spin_lock_bh(&ar->ab->base_lock);