summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/atmel
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/wireless/atmel
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/wireless/atmel')
-rw-r--r--drivers/net/wireless/atmel/Kconfig58
-rw-r--r--drivers/net/wireless/atmel/Makefile6
-rw-r--r--drivers/net/wireless/atmel/at76c50x-usb.c2613
-rw-r--r--drivers/net/wireless/atmel/at76c50x-usb.h462
-rw-r--r--drivers/net/wireless/atmel/atmel.c4524
-rw-r--r--drivers/net/wireless/atmel/atmel.h31
-rw-r--r--drivers/net/wireless/atmel/atmel_cs.c292
-rw-r--r--drivers/net/wireless/atmel/atmel_pci.c65
8 files changed, 8051 insertions, 0 deletions
diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig
new file mode 100644
index 0000000000..bafdd57b04
--- /dev/null
+++ b/drivers/net/wireless/atmel/Kconfig
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config WLAN_VENDOR_ATMEL
+ bool "Atmel devices"
+ default y
+ help
+ If you have a wireless card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all the
+ questions about these cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if WLAN_VENDOR_ATMEL
+
+config ATMEL
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on CFG80211 && (PCI || PCMCIA) && HAS_IOPORT
+ select WIRELESS_EXT
+ select WEXT_PRIV
+ select FW_LOADER
+ select CRC32
+ help
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
+
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ help
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on ATMEL && PCMCIA
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRC32
+ help
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
+
+config AT76C50X_USB
+ tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+ depends on MAC80211 && USB
+ select FW_LOADER
+ help
+ Enable support for USB Wireless devices using Atmel at76c503,
+ at76c505 or at76c505a chips.
+
+endif # WLAN_VENDOR_ATMEL
diff --git a/drivers/net/wireless/atmel/Makefile b/drivers/net/wireless/atmel/Makefile
new file mode 100644
index 0000000000..17e6280567
--- /dev/null
+++ b/drivers/net/wireless/atmel/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ATMEL) += atmel.o
+obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
+obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
+
+obj-$(CONFIG_AT76C50X_USB) += at76c50x-usb.o
diff --git a/drivers/net/wireless/atmel/at76c50x-usb.c b/drivers/net/wireless/atmel/at76c50x-usb.c
new file mode 100644
index 0000000000..447b51cff8
--- /dev/null
+++ b/drivers/net/wireless/atmel/at76c50x-usb.c
@@ -0,0 +1,2613 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at76c503/at76c505 USB driver
+ *
+ * Copyright (c) 2002 - 2003 Oliver Kurth
+ * Copyright (c) 2004 Joerg Albert <joerg.albert@gmx.de>
+ * Copyright (c) 2004 Nick Jones
+ * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com>
+ * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org>
+ * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi>
+ * Copyright (c) 2010 Sebastian Smolorz <sesmo@gmx.net>
+ *
+ * This file is part of the Berlios driver for USB WLAN devices based on the
+ * Atmel AT76C503A/505/505A.
+ *
+ * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
+ *
+ * TODO list is at the wiki:
+ *
+ * https://wireless.wiki.kernel.org/en/users/Drivers/at76c50x-usb#TODO
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <net/ieee80211_radiotap.h>
+#include <linux/firmware.h>
+#include <linux/leds.h>
+#include <net/mac80211.h>
+
+#include "at76c50x-usb.h"
+
+/* Version information */
+#define DRIVER_NAME "at76c50x-usb"
+#define DRIVER_VERSION "0.17"
+#define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver"
+
+/* at76_debug bits */
+#define DBG_PROGRESS 0x00000001 /* authentication/accociation */
+#define DBG_BSS_TABLE 0x00000002 /* show BSS table after scans */
+#define DBG_IOCTL 0x00000004 /* ioctl calls / settings */
+#define DBG_MAC_STATE 0x00000008 /* MAC state transitions */
+#define DBG_TX_DATA 0x00000010 /* tx header */
+#define DBG_TX_DATA_CONTENT 0x00000020 /* tx content */
+#define DBG_TX_MGMT 0x00000040 /* tx management */
+#define DBG_RX_DATA 0x00000080 /* rx data header */
+#define DBG_RX_DATA_CONTENT 0x00000100 /* rx data content */
+#define DBG_RX_MGMT 0x00000200 /* rx mgmt frame headers */
+#define DBG_RX_BEACON 0x00000400 /* rx beacon */
+#define DBG_RX_CTRL 0x00000800 /* rx control */
+#define DBG_RX_MGMT_CONTENT 0x00001000 /* rx mgmt content */
+#define DBG_RX_FRAGS 0x00002000 /* rx data fragment handling */
+#define DBG_DEVSTART 0x00004000 /* fw download, device start */
+#define DBG_URB 0x00008000 /* rx urb status, ... */
+#define DBG_RX_ATMEL_HDR 0x00010000 /* Atmel-specific Rx headers */
+#define DBG_PROC_ENTRY 0x00020000 /* procedure entries/exits */
+#define DBG_PM 0x00040000 /* power management settings */
+#define DBG_BSS_MATCH 0x00080000 /* BSS match failures */
+#define DBG_PARAMS 0x00100000 /* show configured parameters */
+#define DBG_WAIT_COMPLETE 0x00200000 /* command completion */
+#define DBG_RX_FRAGS_SKB 0x00400000 /* skb header of Rx fragments */
+#define DBG_BSS_TABLE_RM 0x00800000 /* purging bss table entries */
+#define DBG_MONITOR_MODE 0x01000000 /* monitor mode */
+#define DBG_MIB 0x02000000 /* dump all MIBs on startup */
+#define DBG_MGMT_TIMER 0x04000000 /* dump mgmt_timer ops */
+#define DBG_WE_EVENTS 0x08000000 /* dump wireless events */
+#define DBG_FW 0x10000000 /* firmware download */
+#define DBG_DFU 0x20000000 /* device firmware upgrade */
+#define DBG_CMD 0x40000000
+#define DBG_MAC80211 0x80000000
+
+#define DBG_DEFAULTS 0
+
+/* Use our own dbg macro */
+#define at76_dbg(bits, format, arg...) \
+do { \
+ if (at76_debug & (bits)) \
+ printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
+} while (0)
+
+#define at76_dbg_dump(bits, buf, len, format, arg...) \
+do { \
+ if (at76_debug & (bits)) { \
+ printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \
+ } \
+} while (0)
+
+static uint at76_debug = DBG_DEFAULTS;
+
+/* Protect against concurrent firmware loading and parsing */
+static DEFINE_MUTEX(fw_mutex);
+
+static struct fwentry firmwares[] = {
+ [0] = { "" },
+ [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" },
+ [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" },
+ [BOARD_503] = { "atmel_at76c503-rfmd.bin" },
+ [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" },
+ [BOARD_505] = { "atmel_at76c505-rfmd.bin" },
+ [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" },
+ [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" },
+ [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" },
+};
+MODULE_FIRMWARE("atmel_at76c503-i3861.bin");
+MODULE_FIRMWARE("atmel_at76c503-i3863.bin");
+MODULE_FIRMWARE("atmel_at76c503-rfmd.bin");
+MODULE_FIRMWARE("atmel_at76c503-rfmd-acc.bin");
+MODULE_FIRMWARE("atmel_at76c505-rfmd.bin");
+MODULE_FIRMWARE("atmel_at76c505-rfmd2958.bin");
+MODULE_FIRMWARE("atmel_at76c505a-rfmd2958.bin");
+MODULE_FIRMWARE("atmel_at76c505amx-rfmd.bin");
+
+#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops)
+
+static const struct usb_device_id dev_table[] = {
+ /*
+ * at76c503-i3861
+ */
+ /* Generic AT76C503/3861 device */
+ { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* Linksys WUSB11 v2.1/v2.6 */
+ { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* Netgear MA101 rev. A */
+ { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* Tekram U300C / Allnet ALL0193 */
+ { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* HP HN210W J7801A */
+ { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* Sitecom/Z-Com/Zyxel M4Y-750 */
+ { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* Dynalink/Askey WLL013 (intersil) */
+ { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* EZ connect 11Mpbs USB Wireless Adapter SMC2662W v1 */
+ { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* BenQ AWL300 */
+ { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* Addtron AWU-120, Compex WLU11 */
+ { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* Intel AP310 AnyPoint II USB */
+ { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* Dynalink L11U */
+ { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* Arescom WL-210, FCC id 07J-GL2411USB */
+ { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* I-O DATA WN-B11/USB */
+ { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /* BT Voyager 1010 */
+ { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+ /*
+ * at76c503-i3863
+ */
+ /* Generic AT76C503/3863 device */
+ { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) },
+ /* Samsung SWL-2100U */
+ { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) },
+ /*
+ * at76c503-rfmd
+ */
+ /* Generic AT76C503/RFMD device */
+ { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) },
+ /* Dynalink/Askey WLL013 (rfmd) */
+ { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) },
+ /* Linksys WUSB11 v2.6 */
+ { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) },
+ /* Network Everywhere NWU11B */
+ { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) },
+ /* Netgear MA101 rev. B */
+ { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) },
+ /* D-Link DWL-120 rev. E */
+ { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) },
+ /* Actiontec 802UAT1, HWU01150-01UK */
+ { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) },
+ /* AirVast W-Buddie WN210 */
+ { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) },
+ /* Dick Smith Electronics XH1153 802.11b USB adapter */
+ { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) },
+ /* CNet CNUSB611 */
+ { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) },
+ /* FiberLine FL-WL200U */
+ { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) },
+ /* BenQ AWL400 USB stick */
+ { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) },
+ /* 3Com 3CRSHEW696 */
+ { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) },
+ /* Siemens Santis ADSL USB WLAN adapter WLL 013 */
+ { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) },
+ /* Belkin F5D6050, version 2 */
+ { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) },
+ /* iBlitzz, BWU613 (not *B or *SB) */
+ { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) },
+ /* Gigabyte GN-WLBM101 */
+ { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) },
+ /* Planex GW-US11S */
+ { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) },
+ /* Internal WLAN adapter in h5[4,5]xx series iPAQs */
+ { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) },
+ /* Corega Wireless LAN USB-11 mini */
+ { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) },
+ /* Corega Wireless LAN USB-11 mini2 */
+ { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) },
+ /* Uniden PCW100 */
+ { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) },
+ /*
+ * at76c503-rfmd-acc
+ */
+ /* SMC2664W */
+ { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) },
+ /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
+ { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) },
+ /*
+ * at76c505-rfmd
+ */
+ /* Generic AT76C505/RFMD */
+ { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) },
+ /*
+ * at76c505-rfmd2958
+ */
+ /* Generic AT76C505/RFMD, OvisLink WL-1130USB */
+ { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
+ /* Fiberline FL-WL240U */
+ { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) },
+ /* CNet CNUSB-611G */
+ { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) },
+ /* Linksys WUSB11 v2.8 */
+ { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) },
+ /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
+ { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) },
+ /* Corega USB WLAN Stick 11 */
+ { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
+ /* Microstar MSI Box MS6978 */
+ { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) },
+ /*
+ * at76c505a-rfmd2958
+ */
+ /* Generic AT76C505A device */
+ { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) },
+ /* Generic AT76C505AS device */
+ { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
+ /* Siemens Gigaset USB WLAN Adapter 11 */
+ { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
+ /* OQO Model 01+ Internal Wi-Fi */
+ { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) },
+ /*
+ * at76c505amx-rfmd
+ */
+ /* Generic AT76C505AMX device */
+ { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, dev_table);
+
+/* Supported rates of this hardware, bit 7 marks basic rates */
+static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };
+
+static const char *const preambles[] = { "long", "short", "auto" };
+
+/* Firmware download */
+/* DFU states */
+#define STATE_IDLE 0x00
+#define STATE_DETACH 0x01
+#define STATE_DFU_IDLE 0x02
+#define STATE_DFU_DOWNLOAD_SYNC 0x03
+#define STATE_DFU_DOWNLOAD_BUSY 0x04
+#define STATE_DFU_DOWNLOAD_IDLE 0x05
+#define STATE_DFU_MANIFEST_SYNC 0x06
+#define STATE_DFU_MANIFEST 0x07
+#define STATE_DFU_MANIFEST_WAIT_RESET 0x08
+#define STATE_DFU_UPLOAD_IDLE 0x09
+#define STATE_DFU_ERROR 0x0a
+
+/* DFU commands */
+#define DFU_DETACH 0
+#define DFU_DNLOAD 1
+#define DFU_UPLOAD 2
+#define DFU_GETSTATUS 3
+#define DFU_CLRSTATUS 4
+#define DFU_GETSTATE 5
+#define DFU_ABORT 6
+
+#define FW_BLOCK_SIZE 1024
+
+struct dfu_status {
+ unsigned char status;
+ unsigned char poll_timeout[3];
+ unsigned char state;
+ unsigned char string;
+} __packed;
+
+static inline int at76_is_intersil(enum board_type board)
+{
+ return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
+}
+
+static inline int at76_is_503rfmd(enum board_type board)
+{
+ return (board == BOARD_503 || board == BOARD_503_ACC);
+}
+
+static inline int at76_is_505a(enum board_type board)
+{
+ return (board == BOARD_505A || board == BOARD_505AMX);
+}
+
+/* Load a block of the first (internal) part of the firmware */
+static int at76_load_int_fw_block(struct usb_device *udev, int blockno,
+ void *block, int size)
+{
+ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD,
+ USB_TYPE_CLASS | USB_DIR_OUT |
+ USB_RECIP_INTERFACE, blockno, 0, block, size,
+ USB_CTRL_GET_TIMEOUT);
+}
+
+static int at76_dfu_get_status(struct usb_device *udev,
+ struct dfu_status *status)
+{
+ int ret;
+
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS,
+ USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
+ 0, 0, status, sizeof(struct dfu_status),
+ USB_CTRL_GET_TIMEOUT);
+ return ret;
+}
+
+static int at76_dfu_get_state(struct usb_device *udev, u8 *state)
+{
+ int ret;
+
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE,
+ USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
+ 0, 0, state, 1, USB_CTRL_GET_TIMEOUT);
+ return ret;
+}
+
+/* Convert timeout from the DFU status to jiffies */
+static inline unsigned long at76_get_timeout(struct dfu_status *s)
+{
+ return msecs_to_jiffies((s->poll_timeout[2] << 16)
+ | (s->poll_timeout[1] << 8)
+ | (s->poll_timeout[0]));
+}
+
+/* Load internal firmware from the buffer. If manifest_sync_timeout > 0, use
+ * its value in jiffies in the MANIFEST_SYNC state. */
+static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
+ int manifest_sync_timeout)
+{
+ int ret = 0;
+ int need_dfu_state = 1;
+ int is_done = 0;
+ u32 dfu_timeout = 0;
+ int bsize = 0;
+ int blockno = 0;
+ struct dfu_status *dfu_stat_buf = NULL;
+ u8 *dfu_state = NULL;
+ u8 *block = NULL;
+
+ at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size,
+ manifest_sync_timeout);
+
+ if (!size) {
+ dev_err(&udev->dev, "FW buffer length invalid!\n");
+ return -EINVAL;
+ }
+
+ dfu_stat_buf = kmalloc(sizeof(struct dfu_status), GFP_KERNEL);
+ if (!dfu_stat_buf) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
+ if (!block) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ dfu_state = kmalloc(sizeof(u8), GFP_KERNEL);
+ if (!dfu_state) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+ *dfu_state = 0;
+
+ do {
+ if (need_dfu_state) {
+ ret = at76_dfu_get_state(udev, dfu_state);
+ if (ret < 0) {
+ dev_err(&udev->dev,
+ "cannot get DFU state: %d\n", ret);
+ goto exit;
+ }
+ need_dfu_state = 0;
+ }
+
+ switch (*dfu_state) {
+ case STATE_DFU_DOWNLOAD_SYNC:
+ at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC");
+ ret = at76_dfu_get_status(udev, dfu_stat_buf);
+ if (ret >= 0) {
+ *dfu_state = dfu_stat_buf->state;
+ dfu_timeout = at76_get_timeout(dfu_stat_buf);
+ need_dfu_state = 0;
+ } else
+ dev_err(&udev->dev,
+ "at76_dfu_get_status returned %d\n",
+ ret);
+ break;
+
+ case STATE_DFU_DOWNLOAD_BUSY:
+ at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY");
+ need_dfu_state = 1;
+
+ at76_dbg(DBG_DFU, "DFU: Resetting device");
+ schedule_timeout_interruptible(dfu_timeout);
+ break;
+
+ case STATE_DFU_DOWNLOAD_IDLE:
+ at76_dbg(DBG_DFU, "DOWNLOAD...");
+ fallthrough;
+ case STATE_DFU_IDLE:
+ at76_dbg(DBG_DFU, "DFU IDLE");
+
+ bsize = min_t(int, size, FW_BLOCK_SIZE);
+ memcpy(block, buf, bsize);
+ at76_dbg(DBG_DFU, "int fw, size left = %5d, "
+ "bsize = %4d, blockno = %2d", size, bsize,
+ blockno);
+ ret =
+ at76_load_int_fw_block(udev, blockno, block, bsize);
+ buf += bsize;
+ size -= bsize;
+ blockno++;
+
+ if (ret != bsize)
+ dev_err(&udev->dev,
+ "at76_load_int_fw_block returned %d\n",
+ ret);
+ need_dfu_state = 1;
+ break;
+
+ case STATE_DFU_MANIFEST_SYNC:
+ at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC");
+
+ ret = at76_dfu_get_status(udev, dfu_stat_buf);
+ if (ret < 0)
+ break;
+
+ *dfu_state = dfu_stat_buf->state;
+ dfu_timeout = at76_get_timeout(dfu_stat_buf);
+ need_dfu_state = 0;
+
+ /* override the timeout from the status response,
+ needed for AT76C505A */
+ if (manifest_sync_timeout > 0)
+ dfu_timeout = manifest_sync_timeout;
+
+ at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase");
+ schedule_timeout_interruptible(dfu_timeout);
+ break;
+
+ case STATE_DFU_MANIFEST:
+ at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST");
+ is_done = 1;
+ break;
+
+ case STATE_DFU_MANIFEST_WAIT_RESET:
+ at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET");
+ is_done = 1;
+ break;
+
+ case STATE_DFU_UPLOAD_IDLE:
+ at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE");
+ break;
+
+ case STATE_DFU_ERROR:
+ at76_dbg(DBG_DFU, "STATE_DFU_ERROR");
+ ret = -EPIPE;
+ break;
+
+ default:
+ at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", *dfu_state);
+ ret = -EINVAL;
+ break;
+ }
+ } while (!is_done && (ret >= 0));
+
+exit:
+ kfree(dfu_state);
+ kfree(block);
+ kfree(dfu_stat_buf);
+
+ if (ret >= 0)
+ ret = 0;
+
+ return ret;
+}
+
+/* LED trigger */
+static int tx_activity;
+static void at76_ledtrig_tx_timerfunc(struct timer_list *unused);
+static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc);
+DEFINE_LED_TRIGGER(ledtrig_tx);
+
+static void at76_ledtrig_tx_timerfunc(struct timer_list *unused)
+{
+ static int tx_lastactivity;
+
+ if (tx_lastactivity != tx_activity) {
+ tx_lastactivity = tx_activity;
+ led_trigger_event(ledtrig_tx, LED_FULL);
+ mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
+ } else
+ led_trigger_event(ledtrig_tx, LED_OFF);
+}
+
+static void at76_ledtrig_tx_activity(void)
+{
+ tx_activity++;
+ if (!timer_pending(&ledtrig_tx_timer))
+ mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
+}
+
+static int at76_remap(struct usb_device *udev)
+{
+ int ret;
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a,
+ USB_TYPE_VENDOR | USB_DIR_OUT |
+ USB_RECIP_INTERFACE, 0, 0, NULL, 0,
+ USB_CTRL_GET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int at76_get_op_mode(struct usb_device *udev)
+{
+ int ret;
+ u8 saved;
+ u8 *op_mode;
+
+ op_mode = kmalloc(1, GFP_NOIO);
+ if (!op_mode)
+ return -ENOMEM;
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
+ USB_TYPE_VENDOR | USB_DIR_IN |
+ USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
+ USB_CTRL_GET_TIMEOUT);
+ saved = *op_mode;
+ kfree(op_mode);
+
+ if (ret < 0)
+ return ret;
+ else if (ret < 1)
+ return -EIO;
+ else
+ return saved;
+}
+
+/* Load a block of the second ("external") part of the firmware */
+static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno,
+ void *block, int size)
+{
+ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ 0x0802, blockno, block, size,
+ USB_CTRL_GET_TIMEOUT);
+}
+
+static inline int at76_get_hw_cfg(struct usb_device *udev,
+ union at76_hwcfg *buf, int buf_size)
+{
+ return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
+ USB_TYPE_VENDOR | USB_DIR_IN |
+ USB_RECIP_INTERFACE, 0x0a02, 0,
+ buf, buf_size, USB_CTRL_GET_TIMEOUT);
+}
+
+/* Intersil boards use a different "value" for GetHWConfig requests */
+static inline int at76_get_hw_cfg_intersil(struct usb_device *udev,
+ union at76_hwcfg *buf, int buf_size)
+{
+ return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
+ USB_TYPE_VENDOR | USB_DIR_IN |
+ USB_RECIP_INTERFACE, 0x0902, 0,
+ buf, buf_size, USB_CTRL_GET_TIMEOUT);
+}
+
+/* Get the hardware configuration for the adapter and put it to the appropriate
+ * fields of 'priv' (the GetHWConfig request and interpretation of the result
+ * depends on the board type) */
+static int at76_get_hw_config(struct at76_priv *priv)
+{
+ int ret;
+ union at76_hwcfg *hwcfg = kmalloc(sizeof(*hwcfg), GFP_KERNEL);
+
+ if (!hwcfg)
+ return -ENOMEM;
+
+ if (at76_is_intersil(priv->board_type)) {
+ ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg,
+ sizeof(hwcfg->i));
+ if (ret < 0)
+ goto exit;
+ memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN);
+ priv->regulatory_domain = hwcfg->i.regulatory_domain;
+ } else if (at76_is_503rfmd(priv->board_type)) {
+ ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3));
+ if (ret < 0)
+ goto exit;
+ memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN);
+ priv->regulatory_domain = hwcfg->r3.regulatory_domain;
+ } else {
+ ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5));
+ if (ret < 0)
+ goto exit;
+ memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN);
+ priv->regulatory_domain = hwcfg->r5.regulatory_domain;
+ }
+
+exit:
+ kfree(hwcfg);
+ if (ret < 0)
+ wiphy_err(priv->hw->wiphy, "cannot get HW Config (error %d)\n",
+ ret);
+
+ return ret;
+}
+
+static struct reg_domain const *at76_get_reg_domain(u16 code)
+{
+ int i;
+ static struct reg_domain const fd_tab[] = {
+ { 0x10, "FCC (USA)", 0x7ff }, /* ch 1-11 */
+ { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */
+ { 0x30, "ETSI (most of Europe)", 0x1fff }, /* ch 1-13 */
+ { 0x31, "Spain", 0x600 }, /* ch 10-11 */
+ { 0x32, "France", 0x1e00 }, /* ch 10-13 */
+ { 0x40, "MKK (Japan)", 0x2000 }, /* ch 14 */
+ { 0x41, "MKK1 (Japan)", 0x3fff }, /* ch 1-14 */
+ { 0x50, "Israel", 0x3fc }, /* ch 3-9 */
+ { 0x00, "<unknown>", 0xffffffff } /* ch 1-32 */
+ };
+
+ /* Last entry is fallback for unknown domain code */
+ for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++)
+ if (code == fd_tab[i].code)
+ break;
+
+ return &fd_tab[i];
+}
+
+static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
+ int buf_size)
+{
+ int ret;
+
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
+ USB_TYPE_VENDOR | USB_DIR_IN |
+ USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size,
+ USB_CTRL_GET_TIMEOUT);
+ if (ret >= 0 && ret != buf_size)
+ return -EIO;
+ return ret;
+}
+
+/* Return positive number for status, negative for an error */
+static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
+{
+ u8 *stat_buf;
+ int ret;
+
+ stat_buf = kmalloc(40, GFP_NOIO);
+ if (!stat_buf)
+ return -ENOMEM;
+
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
+ USB_TYPE_VENDOR | USB_DIR_IN |
+ USB_RECIP_INTERFACE, cmd, 0, stat_buf,
+ 40, USB_CTRL_GET_TIMEOUT);
+ if (ret >= 0)
+ ret = stat_buf[5];
+ kfree(stat_buf);
+
+ return ret;
+}
+
+#define MAKE_CMD_CASE(c) case (c): return #c
+static const char *at76_get_cmd_string(u8 cmd_status)
+{
+ switch (cmd_status) {
+ MAKE_CMD_CASE(CMD_SET_MIB);
+ MAKE_CMD_CASE(CMD_GET_MIB);
+ MAKE_CMD_CASE(CMD_SCAN);
+ MAKE_CMD_CASE(CMD_JOIN);
+ MAKE_CMD_CASE(CMD_START_IBSS);
+ MAKE_CMD_CASE(CMD_RADIO_ON);
+ MAKE_CMD_CASE(CMD_RADIO_OFF);
+ MAKE_CMD_CASE(CMD_STARTUP);
+ }
+
+ return "UNKNOWN";
+}
+
+static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
+ int buf_size)
+{
+ int ret;
+ struct at76_command *cmd_buf = kmalloc(sizeof(struct at76_command) +
+ buf_size, GFP_KERNEL);
+
+ if (!cmd_buf)
+ return -ENOMEM;
+
+ cmd_buf->cmd = cmd;
+ cmd_buf->reserved = 0;
+ cmd_buf->size = cpu_to_le16(buf_size);
+ memcpy(cmd_buf->data, buf, buf_size);
+
+ at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size,
+ "issuing command %s (0x%02x)",
+ at76_get_cmd_string(cmd), cmd);
+
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ 0, 0, cmd_buf,
+ sizeof(struct at76_command) + buf_size,
+ USB_CTRL_GET_TIMEOUT);
+ kfree(cmd_buf);
+ return ret;
+}
+
+#define MAKE_CMD_STATUS_CASE(c) case (c): return #c
+static const char *at76_get_cmd_status_string(u8 cmd_status)
+{
+ switch (cmd_status) {
+ MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE);
+ MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE);
+ MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN);
+ MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER);
+ MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED);
+ MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT);
+ MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS);
+ MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE);
+ MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED);
+ }
+
+ return "UNKNOWN";
+}
+
+/* Wait until the command is completed */
+static int at76_wait_completion(struct at76_priv *priv, int cmd)
+{
+ int status = 0;
+ unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT;
+
+ do {
+ status = at76_get_cmd_status(priv->udev, cmd);
+ if (status < 0) {
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_cmd_status failed: %d\n",
+ status);
+ break;
+ }
+
+ at76_dbg(DBG_WAIT_COMPLETE,
+ "%s: Waiting on cmd %d, status = %d (%s)",
+ wiphy_name(priv->hw->wiphy), cmd, status,
+ at76_get_cmd_status_string(status));
+
+ if (status != CMD_STATUS_IN_PROGRESS
+ && status != CMD_STATUS_IDLE)
+ break;
+
+ schedule_timeout_interruptible(HZ / 10); /* 100 ms */
+ if (time_after(jiffies, timeout)) {
+ wiphy_err(priv->hw->wiphy,
+ "completion timeout for command %d\n", cmd);
+ status = -ETIMEDOUT;
+ break;
+ }
+ } while (1);
+
+ return status;
+}
+
+static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
+{
+ int ret;
+
+ ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf,
+ offsetof(struct set_mib_buffer,
+ data) + buf->size);
+ if (ret < 0)
+ return ret;
+
+ ret = at76_wait_completion(priv, CMD_SET_MIB);
+ if (ret != CMD_STATUS_COMPLETE) {
+ wiphy_info(priv->hw->wiphy,
+ "set_mib: at76_wait_completion failed with %d\n",
+ ret);
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+/* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */
+static int at76_set_radio(struct at76_priv *priv, int enable)
+{
+ int ret;
+ int cmd;
+
+ if (priv->radio_on == enable)
+ return 0;
+
+ cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF;
+
+ ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
+ if (ret < 0)
+ wiphy_err(priv->hw->wiphy,
+ "at76_set_card_command(%d) failed: %d\n", cmd, ret);
+ else
+ ret = 1;
+
+ priv->radio_on = enable;
+ return ret;
+}
+
+/* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */
+static int at76_set_pm_mode(struct at76_priv *priv)
+{
+ int ret = 0;
+
+ priv->mib_buf.type = MIB_MAC_MGMT;
+ priv->mib_buf.size = 1;
+ priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode);
+ priv->mib_buf.data.byte = priv->pm_mode;
+
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret < 0)
+ wiphy_err(priv->hw->wiphy, "set_mib (pm_mode) failed: %d\n",
+ ret);
+
+ return ret;
+}
+
+static int at76_set_preamble(struct at76_priv *priv, u8 type)
+{
+ int ret = 0;
+
+ priv->mib_buf.type = MIB_LOCAL;
+ priv->mib_buf.size = 1;
+ priv->mib_buf.index = offsetof(struct mib_local, preamble_type);
+ priv->mib_buf.data.byte = type;
+
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret < 0)
+ wiphy_err(priv->hw->wiphy, "set_mib (preamble) failed: %d\n",
+ ret);
+
+ return ret;
+}
+
+static int at76_set_frag(struct at76_priv *priv, u16 size)
+{
+ int ret = 0;
+
+ priv->mib_buf.type = MIB_MAC;
+ priv->mib_buf.size = 2;
+ priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold);
+ priv->mib_buf.data.word = cpu_to_le16(size);
+
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret < 0)
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (frag threshold) failed: %d\n", ret);
+
+ return ret;
+}
+
+static int at76_set_rts(struct at76_priv *priv, u16 size)
+{
+ int ret = 0;
+
+ priv->mib_buf.type = MIB_MAC;
+ priv->mib_buf.size = 2;
+ priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold);
+ priv->mib_buf.data.word = cpu_to_le16(size);
+
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret < 0)
+ wiphy_err(priv->hw->wiphy, "set_mib (rts) failed: %d\n", ret);
+
+ return ret;
+}
+
+static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff)
+{
+ int ret = 0;
+
+ priv->mib_buf.type = MIB_LOCAL;
+ priv->mib_buf.size = 1;
+ priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback);
+ priv->mib_buf.data.byte = onoff;
+
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret < 0)
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (autorate fallback) failed: %d\n", ret);
+
+ return ret;
+}
+
+static void at76_dump_mib_mac_addr(struct at76_priv *priv)
+{
+ int i;
+ int ret;
+ struct mib_mac_addr *m = kmalloc(sizeof(struct mib_mac_addr),
+ GFP_KERNEL);
+
+ if (!m)
+ return;
+
+ ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m,
+ sizeof(struct mib_mac_addr));
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (MAC_ADDR) failed: %d\n", ret);
+ goto exit;
+ }
+
+ at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x",
+ wiphy_name(priv->hw->wiphy),
+ m->mac_addr, m->res[0], m->res[1]);
+ for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
+ at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, "
+ "status %d", wiphy_name(priv->hw->wiphy), i,
+ m->group_addr[i], m->group_addr_status[i]);
+exit:
+ kfree(m);
+}
+
+static void at76_dump_mib_mac_wep(struct at76_priv *priv)
+{
+ int i;
+ int ret;
+ int key_len;
+ struct mib_mac_wep *m = kmalloc(sizeof(struct mib_mac_wep), GFP_KERNEL);
+
+ if (!m)
+ return;
+
+ ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m,
+ sizeof(struct mib_mac_wep));
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (MAC_WEP) failed: %d\n", ret);
+ goto exit;
+ }
+
+ at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
+ "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
+ "encr_level %u key %d", wiphy_name(priv->hw->wiphy),
+ m->privacy_invoked, m->wep_default_key_id,
+ m->wep_key_mapping_len, m->exclude_unencrypted,
+ le32_to_cpu(m->wep_icv_error_count),
+ le32_to_cpu(m->wep_excluded_count), m->encryption_level,
+ m->wep_default_key_id);
+
+ key_len = (m->encryption_level == 1) ?
+ WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
+
+ for (i = 0; i < WEP_KEYS; i++)
+ at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %*phD",
+ wiphy_name(priv->hw->wiphy), i,
+ key_len, m->wep_default_keyvalue[i]);
+exit:
+ kfree(m);
+}
+
+static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
+{
+ int ret;
+ struct mib_mac_mgmt *m = kmalloc(sizeof(struct mib_mac_mgmt),
+ GFP_KERNEL);
+
+ if (!m)
+ return;
+
+ ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m,
+ sizeof(struct mib_mac_mgmt));
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (MAC_MGMT) failed: %d\n", ret);
+ goto exit;
+ }
+
+ at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration "
+ "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d "
+ "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d "
+ "current_bssid %pM current_essid %*phD current_bss_type %d "
+ "pm_mode %d ibss_change %d res %d "
+ "multi_domain_capability_implemented %d "
+ "international_roaming %d country_string %.3s",
+ wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period),
+ le16_to_cpu(m->CFP_max_duration),
+ le16_to_cpu(m->medium_occupancy_limit),
+ le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
+ m->CFP_mode, m->privacy_option_implemented, m->DTIM_period,
+ m->CFP_period, m->current_bssid,
+ IW_ESSID_MAX_SIZE, m->current_essid,
+ m->current_bss_type, m->power_mgmt_mode, m->ibss_change,
+ m->res, m->multi_domain_capability_implemented,
+ m->multi_domain_capability_enabled, m->country_string);
+exit:
+ kfree(m);
+}
+
+static void at76_dump_mib_mac(struct at76_priv *priv)
+{
+ int ret;
+ struct mib_mac *m = kmalloc(sizeof(struct mib_mac), GFP_KERNEL);
+
+ if (!m)
+ return;
+
+ ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (MAC) failed: %d\n", ret);
+ goto exit;
+ }
+
+ at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d "
+ "max_rx_lifetime %d frag_threshold %d rts_threshold %d "
+ "cwmin %d cwmax %d short_retry_time %d long_retry_time %d "
+ "scan_type %d scan_channel %d probe_delay %u "
+ "min_channel_time %d max_channel_time %d listen_int %d "
+ "desired_ssid %*phD desired_bssid %pM desired_bsstype %d",
+ wiphy_name(priv->hw->wiphy),
+ le32_to_cpu(m->max_tx_msdu_lifetime),
+ le32_to_cpu(m->max_rx_lifetime),
+ le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
+ le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
+ m->short_retry_time, m->long_retry_time, m->scan_type,
+ m->scan_channel, le16_to_cpu(m->probe_delay),
+ le16_to_cpu(m->min_channel_time),
+ le16_to_cpu(m->max_channel_time),
+ le16_to_cpu(m->listen_interval),
+ IW_ESSID_MAX_SIZE, m->desired_ssid,
+ m->desired_bssid, m->desired_bsstype);
+exit:
+ kfree(m);
+}
+
+static void at76_dump_mib_phy(struct at76_priv *priv)
+{
+ int ret;
+ struct mib_phy *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
+
+ if (!m)
+ return;
+
+ ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (PHY) failed: %d\n", ret);
+ goto exit;
+ }
+
+ at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d "
+ "sifs_time %d preamble_length %d plcp_header_length %d "
+ "mpdu_max_length %d cca_mode_supported %d operation_rate_set "
+ "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
+ "phy_type %d current_reg_domain %d",
+ wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold),
+ le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
+ le16_to_cpu(m->preamble_length),
+ le16_to_cpu(m->plcp_header_length),
+ le16_to_cpu(m->mpdu_max_length),
+ le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0],
+ m->operation_rate_set[1], m->operation_rate_set[2],
+ m->operation_rate_set[3], m->channel_id, m->current_cca_mode,
+ m->phy_type, m->current_reg_domain);
+exit:
+ kfree(m);
+}
+
+static void at76_dump_mib_local(struct at76_priv *priv)
+{
+ int ret;
+ struct mib_local *m = kmalloc(sizeof(*m), GFP_KERNEL);
+
+ if (!m)
+ return;
+
+ ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(*m));
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (LOCAL) failed: %d\n", ret);
+ goto exit;
+ }
+
+ at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
+ "txautorate_fallback %d ssid_size %d promiscuous_mode %d "
+ "preamble_type %d", wiphy_name(priv->hw->wiphy),
+ m->beacon_enable,
+ m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
+ m->preamble_type);
+exit:
+ kfree(m);
+}
+
+static void at76_dump_mib_mdomain(struct at76_priv *priv)
+{
+ int ret;
+ struct mib_mdomain *m = kmalloc(sizeof(struct mib_mdomain), GFP_KERNEL);
+
+ if (!m)
+ return;
+
+ ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m,
+ sizeof(struct mib_mdomain));
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (MDOMAIN) failed: %d\n", ret);
+ goto exit;
+ }
+
+ at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %*phD",
+ wiphy_name(priv->hw->wiphy),
+ (int)sizeof(m->channel_list), m->channel_list);
+
+ at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %*phD",
+ wiphy_name(priv->hw->wiphy),
+ (int)sizeof(m->tx_powerlevel), m->tx_powerlevel);
+exit:
+ kfree(m);
+}
+
+/* Enable monitor mode */
+static int at76_start_monitor(struct at76_priv *priv)
+{
+ struct at76_req_scan scan;
+ int ret;
+
+ memset(&scan, 0, sizeof(struct at76_req_scan));
+ eth_broadcast_addr(scan.bssid);
+
+ scan.channel = priv->channel;
+ scan.scan_type = SCAN_TYPE_PASSIVE;
+ scan.international_scan = 0;
+ scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
+ scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
+ scan.probe_delay = cpu_to_le16(0);
+
+ ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
+ if (ret >= 0)
+ ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
+
+ return ret;
+}
+
+/* Calculate padding from txbuf->wlength (which excludes the USB TX header),
+ likely to compensate a flaw in the AT76C503A USB part ... */
+static inline int at76_calc_padding(int wlen)
+{
+ /* add the USB TX header */
+ wlen += AT76_TX_HDRLEN;
+
+ wlen = wlen % 64;
+
+ if (wlen < 50)
+ return 50 - wlen;
+
+ if (wlen >= 61)
+ return 64 + 50 - wlen;
+
+ return 0;
+}
+
+static void at76_rx_callback(struct urb *urb)
+{
+ struct at76_priv *priv = urb->context;
+
+ tasklet_schedule(&priv->rx_tasklet);
+}
+
+static int at76_submit_rx_urb(struct at76_priv *priv)
+{
+ int ret;
+ int size;
+ struct sk_buff *skb = priv->rx_skb;
+
+ if (!priv->rx_urb) {
+ wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is NULL\n",
+ __func__);
+ return -EFAULT;
+ }
+
+ if (!skb) {
+ skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
+ if (!skb) {
+ wiphy_err(priv->hw->wiphy,
+ "cannot allocate rx skbuff\n");
+ ret = -ENOMEM;
+ goto exit;
+ }
+ priv->rx_skb = skb;
+ } else {
+ skb_push(skb, skb_headroom(skb));
+ skb_trim(skb, 0);
+ }
+
+ size = skb_tailroom(skb);
+ usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
+ skb_put(skb, size), size, at76_rx_callback, priv);
+ ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
+ if (ret < 0) {
+ if (ret == -ENODEV)
+ at76_dbg(DBG_DEVSTART,
+ "usb_submit_urb returned -ENODEV");
+ else
+ wiphy_err(priv->hw->wiphy,
+ "rx, usb_submit_urb failed: %d\n", ret);
+ }
+
+exit:
+ if (ret < 0 && ret != -ENODEV)
+ wiphy_err(priv->hw->wiphy,
+ "cannot submit rx urb - please unload the driver and/or power cycle the device\n");
+
+ return ret;
+}
+
+/* Download external firmware */
+static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
+{
+ int ret;
+ int op_mode;
+ int blockno = 0;
+ int bsize;
+ u8 *block;
+ u8 *buf = fwe->extfw;
+ int size = fwe->extfw_size;
+
+ if (!buf || !size)
+ return -ENOENT;
+
+ op_mode = at76_get_op_mode(udev);
+ at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
+
+ if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
+ dev_err(&udev->dev, "unexpected opmode %d\n", op_mode);
+ return -EINVAL;
+ }
+
+ block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
+ if (!block)
+ return -ENOMEM;
+
+ at76_dbg(DBG_DEVSTART, "downloading external firmware");
+
+ /* for fw >= 0.100, the device needs an extra empty block */
+ do {
+ bsize = min_t(int, size, FW_BLOCK_SIZE);
+ memcpy(block, buf, bsize);
+ at76_dbg(DBG_DEVSTART,
+ "ext fw, size left = %5d, bsize = %4d, blockno = %2d",
+ size, bsize, blockno);
+ ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
+ if (ret != bsize) {
+ dev_err(&udev->dev,
+ "loading %dth firmware block failed: %d\n",
+ blockno, ret);
+ ret = -EIO;
+ goto exit;
+ }
+ buf += bsize;
+ size -= bsize;
+ blockno++;
+ } while (bsize > 0);
+
+ if (at76_is_505a(fwe->board_type)) {
+ at76_dbg(DBG_DEVSTART, "200 ms delay for 505a");
+ schedule_timeout_interruptible(HZ / 5 + 1);
+ }
+
+exit:
+ kfree(block);
+ if (ret < 0)
+ dev_err(&udev->dev,
+ "downloading external firmware failed: %d\n", ret);
+ return ret;
+}
+
+/* Download internal firmware */
+static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
+{
+ int ret;
+ int need_remap = !at76_is_505a(fwe->board_type);
+
+ ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
+ need_remap ? 0 : 2 * HZ);
+
+ if (ret < 0) {
+ dev_err(&udev->dev,
+ "downloading internal fw failed with %d\n", ret);
+ goto exit;
+ }
+
+ at76_dbg(DBG_DEVSTART, "sending REMAP");
+
+ /* no REMAP for 505A (see SF driver) */
+ if (need_remap) {
+ ret = at76_remap(udev);
+ if (ret < 0) {
+ dev_err(&udev->dev,
+ "sending REMAP failed with %d\n", ret);
+ goto exit;
+ }
+ }
+
+ at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
+ schedule_timeout_interruptible(2 * HZ + 1);
+ usb_reset_device(udev);
+
+exit:
+ return ret;
+}
+
+static int at76_startup_device(struct at76_priv *priv)
+{
+ struct at76_card_config *ccfg = &priv->card_config;
+ int ret;
+
+ at76_dbg(DBG_PARAMS,
+ "%s param: ssid %.*s (%*phD) mode %s ch %d wep %s key %d "
+ "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size,
+ priv->essid, IW_ESSID_MAX_SIZE, priv->essid,
+ priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
+ priv->channel, priv->wep_enabled ? "enabled" : "disabled",
+ priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
+ at76_dbg(DBG_PARAMS,
+ "%s param: preamble %s rts %d retry %d frag %d "
+ "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy),
+ preambles[priv->preamble_type], priv->rts_threshold,
+ priv->short_retry_limit, priv->frag_threshold,
+ priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
+ TX_RATE_2MBIT ? "2MBit" : priv->txrate ==
+ TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate ==
+ TX_RATE_11MBIT ? "11MBit" : priv->txrate ==
+ TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode);
+ at76_dbg(DBG_PARAMS,
+ "%s param: pm_mode %d pm_period %d auth_mode %s "
+ "scan_times %d %d scan_mode %s",
+ wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period,
+ priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
+ priv->scan_min_time, priv->scan_max_time,
+ priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");
+
+ memset(ccfg, 0, sizeof(struct at76_card_config));
+ ccfg->promiscuous_mode = 0;
+ ccfg->short_retry_limit = priv->short_retry_limit;
+
+ if (priv->wep_enabled) {
+ if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
+ ccfg->encryption_type = 2;
+ else
+ ccfg->encryption_type = 1;
+
+ /* jal: always exclude unencrypted if WEP is active */
+ ccfg->exclude_unencrypted = 1;
+ } else {
+ ccfg->exclude_unencrypted = 0;
+ ccfg->encryption_type = 0;
+ }
+
+ ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold);
+ ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold);
+
+ memcpy(ccfg->basic_rate_set, hw_rates, 4);
+ /* jal: really needed, we do a set_mib for autorate later ??? */
+ ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0);
+ ccfg->channel = priv->channel;
+ ccfg->privacy_invoked = priv->wep_enabled;
+ memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE);
+ ccfg->ssid_len = priv->essid_size;
+
+ ccfg->wep_default_key_id = priv->wep_key_id;
+ memcpy(ccfg->wep_default_key_value, priv->wep_keys,
+ sizeof(priv->wep_keys));
+
+ ccfg->short_preamble = priv->preamble_type;
+ ccfg->beacon_period = cpu_to_le16(priv->beacon_period);
+
+ ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
+ sizeof(struct at76_card_config));
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
+ ret);
+ return ret;
+ }
+
+ at76_wait_completion(priv, CMD_STARTUP);
+
+ /* remove BSSID from previous run */
+ eth_zero_addr(priv->bssid);
+
+ priv->scanning = false;
+
+ if (at76_set_radio(priv, 1) == 1)
+ at76_wait_completion(priv, CMD_RADIO_ON);
+
+ ret = at76_set_preamble(priv, priv->preamble_type);
+ if (ret < 0)
+ return ret;
+
+ ret = at76_set_frag(priv, priv->frag_threshold);
+ if (ret < 0)
+ return ret;
+
+ ret = at76_set_rts(priv, priv->rts_threshold);
+ if (ret < 0)
+ return ret;
+
+ ret = at76_set_autorate_fallback(priv,
+ priv->txrate == TX_RATE_AUTO ? 1 : 0);
+ if (ret < 0)
+ return ret;
+
+ ret = at76_set_pm_mode(priv);
+ if (ret < 0)
+ return ret;
+
+ if (at76_debug & DBG_MIB) {
+ at76_dump_mib_mac(priv);
+ at76_dump_mib_mac_addr(priv);
+ at76_dump_mib_mac_mgmt(priv);
+ at76_dump_mib_mac_wep(priv);
+ at76_dump_mib_mdomain(priv);
+ at76_dump_mib_phy(priv);
+ at76_dump_mib_local(priv);
+ }
+
+ return 0;
+}
+
+/* Enable or disable promiscuous mode */
+static void at76_work_set_promisc(struct work_struct *work)
+{
+ struct at76_priv *priv = container_of(work, struct at76_priv,
+ work_set_promisc);
+ int ret = 0;
+
+ if (priv->device_unplugged)
+ return;
+
+ mutex_lock(&priv->mtx);
+
+ priv->mib_buf.type = MIB_LOCAL;
+ priv->mib_buf.size = 1;
+ priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode);
+ priv->mib_buf.data.byte = priv->promisc ? 1 : 0;
+
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret < 0)
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (promiscuous_mode) failed: %d\n", ret);
+
+ mutex_unlock(&priv->mtx);
+}
+
+/* Submit Rx urb back to the device */
+static void at76_work_submit_rx(struct work_struct *work)
+{
+ struct at76_priv *priv = container_of(work, struct at76_priv,
+ work_submit_rx);
+
+ mutex_lock(&priv->mtx);
+ at76_submit_rx_urb(priv);
+ mutex_unlock(&priv->mtx);
+}
+
+/* This is a workaround to make scan working:
+ * currently mac80211 does not process frames with no frequency
+ * information.
+ * However during scan the HW performs a sweep by itself, and we
+ * are unable to know where the radio is actually tuned.
+ * This function tries to do its best to guess this information..
+ * During scan, If the current frame is a beacon or a probe response,
+ * the channel information is extracted from it.
+ * When not scanning, for other frames, or if it happens that for
+ * whatever reason we fail to parse beacons and probe responses, this
+ * function returns the priv->channel information, that should be correct
+ * at least when we are not scanning.
+ */
+static inline int at76_guess_freq(struct at76_priv *priv)
+{
+ size_t el_off;
+ const u8 *el;
+ int channel = priv->channel;
+ int len = priv->rx_skb->len;
+ struct ieee80211_hdr *hdr = (void *)priv->rx_skb->data;
+
+ if (!priv->scanning)
+ goto exit;
+
+ if (len < 24)
+ goto exit;
+
+ if (ieee80211_is_probe_resp(hdr->frame_control)) {
+ el_off = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
+ el = ((struct ieee80211_mgmt *)hdr)->u.probe_resp.variable;
+ } else if (ieee80211_is_beacon(hdr->frame_control)) {
+ el_off = offsetof(struct ieee80211_mgmt, u.beacon.variable);
+ el = ((struct ieee80211_mgmt *)hdr)->u.beacon.variable;
+ } else {
+ goto exit;
+ }
+ len -= el_off;
+
+ el = cfg80211_find_ie(WLAN_EID_DS_PARAMS, el, len);
+ if (el && el[1] > 0)
+ channel = el[2];
+
+exit:
+ return ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ);
+}
+
+static void at76_rx_tasklet(struct tasklet_struct *t)
+{
+ struct at76_priv *priv = from_tasklet(priv, t, rx_tasklet);
+ struct urb *urb = priv->rx_urb;
+ struct at76_rx_buffer *buf;
+ struct ieee80211_rx_status rx_status = { 0 };
+
+ if (priv->device_unplugged) {
+ at76_dbg(DBG_DEVSTART, "device unplugged");
+ at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
+ return;
+ }
+
+ if (!priv->rx_skb || !priv->rx_skb->data)
+ return;
+
+ buf = (struct at76_rx_buffer *)priv->rx_skb->data;
+
+ if (urb->status != 0) {
+ if (urb->status != -ENOENT && urb->status != -ECONNRESET)
+ at76_dbg(DBG_URB,
+ "%s %s: - nonzero Rx bulk status received: %d",
+ __func__, wiphy_name(priv->hw->wiphy),
+ urb->status);
+ return;
+ }
+
+ at76_dbg(DBG_RX_ATMEL_HDR,
+ "%s: rx frame: rate %d rssi %d noise %d link %d",
+ wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi,
+ buf->noise_level, buf->link_quality);
+
+ skb_pull(priv->rx_skb, AT76_RX_HDRLEN);
+ skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength));
+ at76_dbg_dump(DBG_RX_DATA, priv->rx_skb->data,
+ priv->rx_skb->len, "RX: len=%d", priv->rx_skb->len);
+
+ rx_status.signal = buf->rssi;
+ rx_status.flag |= RX_FLAG_DECRYPTED;
+ rx_status.flag |= RX_FLAG_IV_STRIPPED;
+ rx_status.band = NL80211_BAND_2GHZ;
+ rx_status.freq = at76_guess_freq(priv);
+
+ at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d",
+ priv->rx_skb->len, priv->rx_skb->data_len);
+ memcpy(IEEE80211_SKB_RXCB(priv->rx_skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(priv->hw, priv->rx_skb);
+
+ /* Use a new skb for the next receive */
+ priv->rx_skb = NULL;
+
+ at76_submit_rx_urb(priv);
+}
+
+/* Load firmware into kernel memory and parse it */
+static struct fwentry *at76_load_firmware(struct usb_device *udev,
+ enum board_type board_type)
+{
+ int ret;
+ char *str;
+ struct at76_fw_header *fwh;
+ struct fwentry *fwe = &firmwares[board_type];
+
+ mutex_lock(&fw_mutex);
+
+ if (fwe->loaded) {
+ at76_dbg(DBG_FW, "re-using previously loaded fw");
+ goto exit;
+ }
+
+ at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
+ ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
+ if (ret < 0) {
+ dev_err(&udev->dev, "firmware %s not found!\n",
+ fwe->fwname);
+ dev_err(&udev->dev,
+ "you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n");
+ goto exit;
+ }
+
+ at76_dbg(DBG_FW, "got it.");
+ fwh = (struct at76_fw_header *)(fwe->fw->data);
+
+ if (fwe->fw->size <= sizeof(*fwh)) {
+ dev_err(&udev->dev,
+ "firmware is too short (0x%zx)\n", fwe->fw->size);
+ goto exit;
+ }
+
+ /* CRC currently not checked */
+ fwe->board_type = le32_to_cpu(fwh->board_type);
+ if (fwe->board_type != board_type) {
+ dev_err(&udev->dev,
+ "board type mismatch, requested %u, got %u\n",
+ board_type, fwe->board_type);
+ goto exit;
+ }
+
+ fwe->fw_version.major = fwh->major;
+ fwe->fw_version.minor = fwh->minor;
+ fwe->fw_version.patch = fwh->patch;
+ fwe->fw_version.build = fwh->build;
+
+ str = (char *)fwh + le32_to_cpu(fwh->str_offset);
+ fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
+ fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
+ fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
+ fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);
+
+ fwe->loaded = 1;
+
+ dev_printk(KERN_DEBUG, &udev->dev,
+ "using firmware %s (version %d.%d.%d-%d)\n",
+ fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);
+
+ at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
+ le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
+ le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
+ at76_dbg(DBG_DEVSTART, "firmware id %s", str);
+
+exit:
+ mutex_unlock(&fw_mutex);
+
+ if (fwe->loaded)
+ return fwe;
+ else
+ return NULL;
+}
+
+static int at76_join(struct at76_priv *priv)
+{
+ struct at76_req_join join;
+ int ret;
+
+ memset(&join, 0, sizeof(struct at76_req_join));
+ memcpy(join.essid, priv->essid, priv->essid_size);
+ join.essid_size = priv->essid_size;
+ memcpy(join.bssid, priv->bssid, ETH_ALEN);
+ join.bss_type = INFRASTRUCTURE_MODE;
+ join.channel = priv->channel;
+ join.timeout = cpu_to_le16(2000);
+
+ at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__);
+ ret = at76_set_card_command(priv->udev, CMD_JOIN, &join,
+ sizeof(struct at76_req_join));
+
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
+ ret);
+ return 0;
+ }
+
+ ret = at76_wait_completion(priv, CMD_JOIN);
+ at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret);
+ if (ret != CMD_STATUS_COMPLETE) {
+ wiphy_err(priv->hw->wiphy, "at76_wait_completion failed: %d\n",
+ ret);
+ return 0;
+ }
+
+ at76_set_pm_mode(priv);
+
+ return 0;
+}
+
+static void at76_work_join_bssid(struct work_struct *work)
+{
+ struct at76_priv *priv = container_of(work, struct at76_priv,
+ work_join_bssid);
+
+ if (priv->device_unplugged)
+ return;
+
+ mutex_lock(&priv->mtx);
+
+ if (is_valid_ether_addr(priv->bssid))
+ at76_join(priv);
+
+ mutex_unlock(&priv->mtx);
+}
+
+static void at76_mac80211_tx_callback(struct urb *urb)
+{
+ struct at76_priv *priv = urb->context;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb);
+
+ at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ break;
+ case -ENOENT:
+ case -ECONNRESET:
+ /* fail, urb has been unlinked */
+ /* FIXME: add error message */
+ break;
+ default:
+ at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
+ __func__, urb->status);
+ break;
+ }
+
+ memset(&info->status, 0, sizeof(info->status));
+
+ ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb);
+
+ priv->tx_skb = NULL;
+
+ ieee80211_wake_queues(priv->hw);
+}
+
+static void at76_mac80211_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct at76_priv *priv = hw->priv;
+ struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
+ int padding, submit_len, ret;
+
+ at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+ if (priv->tx_urb->status == -EINPROGRESS) {
+ wiphy_err(priv->hw->wiphy,
+ "%s called while tx urb is pending\n", __func__);
+ dev_kfree_skb_any(skb);
+ return;
+ }
+
+ /* The following code lines are important when the device is going to
+ * authenticate with a new bssid. The driver must send CMD_JOIN before
+ * an authentication frame is transmitted. For this to succeed, the
+ * correct bssid of the AP must be known. As mac80211 does not inform
+ * drivers about the bssid prior to the authentication process the
+ * following workaround is necessary. If the TX frame is an
+ * authentication frame extract the bssid and send the CMD_JOIN. */
+ if (mgmt->frame_control & cpu_to_le16(IEEE80211_STYPE_AUTH)) {
+ if (!ether_addr_equal_64bits(priv->bssid, mgmt->bssid)) {
+ memcpy(priv->bssid, mgmt->bssid, ETH_ALEN);
+ ieee80211_queue_work(hw, &priv->work_join_bssid);
+ dev_kfree_skb_any(skb);
+ return;
+ }
+ }
+
+ ieee80211_stop_queues(hw);
+
+ at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */
+
+ WARN_ON(priv->tx_skb != NULL);
+
+ priv->tx_skb = skb;
+ padding = at76_calc_padding(skb->len);
+ submit_len = AT76_TX_HDRLEN + skb->len + padding;
+
+ /* setup 'Atmel' header */
+ memset(tx_buffer, 0, sizeof(*tx_buffer));
+ tx_buffer->padding = padding;
+ tx_buffer->wlength = cpu_to_le16(skb->len);
+ tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value;
+ memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved));
+ memcpy(tx_buffer->packet, skb->data, skb->len);
+
+ at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr",
+ wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength),
+ tx_buffer->padding, tx_buffer->tx_rate);
+
+ /* send stuff */
+ at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len,
+ "%s(): tx_buffer %d bytes:", __func__, submit_len);
+ usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
+ submit_len, at76_mac80211_tx_callback, priv);
+ ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
+ if (ret) {
+ wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret);
+ if (ret == -EINVAL)
+ wiphy_err(priv->hw->wiphy,
+ "-EINVAL: tx urb %p hcpriv %p complete %p\n",
+ priv->tx_urb,
+ priv->tx_urb->hcpriv, priv->tx_urb->complete);
+ }
+}
+
+static int at76_mac80211_start(struct ieee80211_hw *hw)
+{
+ struct at76_priv *priv = hw->priv;
+ int ret;
+
+ at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+ mutex_lock(&priv->mtx);
+
+ ret = at76_submit_rx_urb(priv);
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy, "open: submit_rx_urb failed: %d\n",
+ ret);
+ goto error;
+ }
+
+ at76_startup_device(priv);
+
+ at76_start_monitor(priv);
+
+error:
+ mutex_unlock(&priv->mtx);
+
+ return 0;
+}
+
+static void at76_mac80211_stop(struct ieee80211_hw *hw)
+{
+ struct at76_priv *priv = hw->priv;
+
+ at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+ cancel_delayed_work(&priv->dwork_hw_scan);
+ cancel_work_sync(&priv->work_join_bssid);
+ cancel_work_sync(&priv->work_set_promisc);
+
+ mutex_lock(&priv->mtx);
+
+ if (!priv->device_unplugged) {
+ /* We are called by "ifconfig ethX down", not because the
+ * device is not available anymore. */
+ at76_set_radio(priv, 0);
+
+ /* We unlink rx_urb because at76_open() re-submits it.
+ * If unplugged, at76_delete_device() takes care of it. */
+ usb_kill_urb(priv->rx_urb);
+ }
+
+ mutex_unlock(&priv->mtx);
+}
+
+static int at76_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct at76_priv *priv = hw->priv;
+ int ret = 0;
+
+ at76_dbg(DBG_MAC80211, "%s()", __func__);
+
+ mutex_lock(&priv->mtx);
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ priv->iw_mode = IW_MODE_INFRA;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto exit;
+ }
+
+exit:
+ mutex_unlock(&priv->mtx);
+
+ return ret;
+}
+
+static void at76_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ at76_dbg(DBG_MAC80211, "%s()", __func__);
+}
+
+static void at76_dwork_hw_scan(struct work_struct *work)
+{
+ struct at76_priv *priv = container_of(work, struct at76_priv,
+ dwork_hw_scan.work);
+ struct cfg80211_scan_info info = {
+ .aborted = false,
+ };
+ int ret;
+
+ if (priv->device_unplugged)
+ return;
+
+ mutex_lock(&priv->mtx);
+
+ ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
+ at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret);
+
+ /* FIXME: add maximum time for scan to complete */
+
+ if (ret != CMD_STATUS_COMPLETE) {
+ ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
+ SCAN_POLL_INTERVAL);
+ mutex_unlock(&priv->mtx);
+ return;
+ }
+
+ if (is_valid_ether_addr(priv->bssid))
+ at76_join(priv);
+
+ priv->scanning = false;
+
+ mutex_unlock(&priv->mtx);
+
+ ieee80211_scan_completed(priv->hw, &info);
+
+ ieee80211_wake_queues(priv->hw);
+}
+
+static int at76_hw_scan(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_scan_request *hw_req)
+{
+ struct cfg80211_scan_request *req = &hw_req->req;
+ struct at76_priv *priv = hw->priv;
+ struct at76_req_scan scan;
+ u8 *ssid = NULL;
+ int ret, len = 0;
+
+ at76_dbg(DBG_MAC80211, "%s():", __func__);
+
+ if (priv->device_unplugged)
+ return 0;
+
+ mutex_lock(&priv->mtx);
+
+ ieee80211_stop_queues(hw);
+
+ memset(&scan, 0, sizeof(struct at76_req_scan));
+ eth_broadcast_addr(scan.bssid);
+
+ if (req->n_ssids) {
+ scan.scan_type = SCAN_TYPE_ACTIVE;
+ ssid = req->ssids[0].ssid;
+ len = req->ssids[0].ssid_len;
+ } else {
+ scan.scan_type = SCAN_TYPE_PASSIVE;
+ }
+
+ if (len) {
+ memcpy(scan.essid, ssid, len);
+ scan.essid_size = len;
+ }
+
+ scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
+ scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
+ scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
+ scan.international_scan = 0;
+
+ at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__);
+ ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
+
+ if (ret < 0) {
+ wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret);
+ goto exit;
+ }
+
+ priv->scanning = true;
+ ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
+ SCAN_POLL_INTERVAL);
+
+exit:
+ mutex_unlock(&priv->mtx);
+
+ return 0;
+}
+
+static int at76_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct at76_priv *priv = hw->priv;
+
+ at76_dbg(DBG_MAC80211, "%s(): channel %d",
+ __func__, hw->conf.chandef.chan->hw_value);
+ at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");
+
+ mutex_lock(&priv->mtx);
+
+ priv->channel = hw->conf.chandef.chan->hw_value;
+
+ if (is_valid_ether_addr(priv->bssid))
+ at76_join(priv);
+ else
+ at76_start_monitor(priv);
+
+ mutex_unlock(&priv->mtx);
+
+ return 0;
+}
+
+static void at76_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *conf,
+ u64 changed)
+{
+ struct at76_priv *priv = hw->priv;
+
+ at76_dbg(DBG_MAC80211, "%s():", __func__);
+
+ if (!(changed & BSS_CHANGED_BSSID))
+ return;
+
+ at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");
+
+ mutex_lock(&priv->mtx);
+
+ memcpy(priv->bssid, conf->bssid, ETH_ALEN);
+
+ if (is_valid_ether_addr(priv->bssid))
+ /* mac80211 is joining a bss */
+ at76_join(priv);
+
+ mutex_unlock(&priv->mtx);
+}
+
+/* must be atomic */
+static void at76_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags, u64 multicast)
+{
+ struct at76_priv *priv = hw->priv;
+ int flags;
+
+ at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x "
+ "total_flags=0x%08x",
+ __func__, changed_flags, *total_flags);
+
+ flags = changed_flags & AT76_SUPPORTED_FILTERS;
+ *total_flags = AT76_SUPPORTED_FILTERS;
+
+ /* Bail out after updating flags to prevent a WARN_ON in mac80211. */
+ if (priv->device_unplugged)
+ return;
+
+ /* FIXME: access to priv->promisc should be protected with
+ * priv->mtx, but it's impossible because this function needs to be
+ * atomic */
+
+ if (flags && !priv->promisc) {
+ /* mac80211 wants us to enable promiscuous mode */
+ priv->promisc = 1;
+ } else if (!flags && priv->promisc) {
+ /* we need to disable promiscuous mode */
+ priv->promisc = 0;
+ } else
+ return;
+
+ ieee80211_queue_work(hw, &priv->work_set_promisc);
+}
+
+static int at76_set_wep(struct at76_priv *priv)
+{
+ int ret = 0;
+ struct mib_mac_wep *mib_data = &priv->mib_buf.data.wep_mib;
+
+ priv->mib_buf.type = MIB_MAC_WEP;
+ priv->mib_buf.size = sizeof(struct mib_mac_wep);
+ priv->mib_buf.index = 0;
+
+ memset(mib_data, 0, sizeof(*mib_data));
+
+ if (priv->wep_enabled) {
+ if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
+ mib_data->encryption_level = 2;
+ else
+ mib_data->encryption_level = 1;
+
+ /* always exclude unencrypted if WEP is active */
+ mib_data->exclude_unencrypted = 1;
+ } else {
+ mib_data->exclude_unencrypted = 0;
+ mib_data->encryption_level = 0;
+ }
+
+ mib_data->privacy_invoked = priv->wep_enabled;
+ mib_data->wep_default_key_id = priv->wep_key_id;
+ memcpy(mib_data->wep_default_keyvalue, priv->wep_keys,
+ sizeof(priv->wep_keys));
+
+ ret = at76_set_mib(priv, &priv->mib_buf);
+
+ if (ret < 0)
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (wep) failed: %d\n", ret);
+
+ return ret;
+}
+
+static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct at76_priv *priv = hw->priv;
+
+ int i;
+
+ at76_dbg(DBG_MAC80211, "%s(): cmd %d key->cipher %d key->keyidx %d "
+ "key->keylen %d",
+ __func__, cmd, key->cipher, key->keyidx, key->keylen);
+
+ if ((key->cipher != WLAN_CIPHER_SUITE_WEP40) &&
+ (key->cipher != WLAN_CIPHER_SUITE_WEP104))
+ return -EOPNOTSUPP;
+
+ key->hw_key_idx = key->keyidx;
+
+ mutex_lock(&priv->mtx);
+
+ switch (cmd) {
+ case SET_KEY:
+ memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen);
+ priv->wep_keys_len[key->keyidx] = key->keylen;
+
+ /* FIXME: find out how to do this properly */
+ priv->wep_key_id = key->keyidx;
+
+ break;
+ case DISABLE_KEY:
+ default:
+ priv->wep_keys_len[key->keyidx] = 0;
+ break;
+ }
+
+ priv->wep_enabled = 0;
+
+ for (i = 0; i < WEP_KEYS; i++) {
+ if (priv->wep_keys_len[i] != 0)
+ priv->wep_enabled = 1;
+ }
+
+ at76_set_wep(priv);
+
+ mutex_unlock(&priv->mtx);
+
+ return 0;
+}
+
+static const struct ieee80211_ops at76_ops = {
+ .tx = at76_mac80211_tx,
+ .wake_tx_queue = ieee80211_handle_wake_tx_queue,
+ .add_interface = at76_add_interface,
+ .remove_interface = at76_remove_interface,
+ .config = at76_config,
+ .bss_info_changed = at76_bss_info_changed,
+ .configure_filter = at76_configure_filter,
+ .start = at76_mac80211_start,
+ .stop = at76_mac80211_stop,
+ .hw_scan = at76_hw_scan,
+ .set_key = at76_set_key,
+};
+
+/* Allocate network device and initialize private data */
+static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
+{
+ struct ieee80211_hw *hw;
+ struct at76_priv *priv;
+
+ hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops);
+ if (!hw) {
+ printk(KERN_ERR DRIVER_NAME ": could not register"
+ " ieee80211_hw\n");
+ return NULL;
+ }
+
+ priv = hw->priv;
+ priv->hw = hw;
+
+ priv->udev = udev;
+
+ mutex_init(&priv->mtx);
+ INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc);
+ INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
+ INIT_WORK(&priv->work_join_bssid, at76_work_join_bssid);
+ INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan);
+
+ tasklet_setup(&priv->rx_tasklet, at76_rx_tasklet);
+
+ priv->pm_mode = AT76_PM_OFF;
+ priv->pm_period = 0;
+
+ /* unit us */
+
+ return priv;
+}
+
+static int at76_alloc_urbs(struct at76_priv *priv,
+ struct usb_interface *interface)
+{
+ struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out;
+ int i;
+ int buffer_size;
+ struct usb_host_interface *iface_desc;
+
+ at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
+
+ at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__,
+ interface->cur_altsetting->desc.bNumEndpoints);
+
+ ep_in = NULL;
+ ep_out = NULL;
+ iface_desc = interface->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+ endpoint = &iface_desc->endpoint[i].desc;
+
+ at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x",
+ __func__, i, endpoint->bEndpointAddress,
+ endpoint->bmAttributes);
+
+ if (!ep_in && usb_endpoint_is_bulk_in(endpoint))
+ ep_in = endpoint;
+
+ if (!ep_out && usb_endpoint_is_bulk_out(endpoint))
+ ep_out = endpoint;
+ }
+
+ if (!ep_in || !ep_out) {
+ dev_err(&interface->dev, "bulk endpoints missing\n");
+ return -ENXIO;
+ }
+
+ priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress);
+ priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress);
+
+ priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!priv->rx_urb || !priv->tx_urb) {
+ dev_err(&interface->dev, "cannot allocate URB\n");
+ return -ENOMEM;
+ }
+
+ buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
+ priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!priv->bulk_out_buffer)
+ return -ENOMEM;
+
+ at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
+
+ return 0;
+}
+
+static struct ieee80211_rate at76_rates[] = {
+ { .bitrate = 10, .hw_value = TX_RATE_1MBIT, },
+ { .bitrate = 20, .hw_value = TX_RATE_2MBIT, },
+ { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, },
+ { .bitrate = 110, .hw_value = TX_RATE_11MBIT, },
+};
+
+static struct ieee80211_channel at76_channels[] = {
+ { .center_freq = 2412, .hw_value = 1 },
+ { .center_freq = 2417, .hw_value = 2 },
+ { .center_freq = 2422, .hw_value = 3 },
+ { .center_freq = 2427, .hw_value = 4 },
+ { .center_freq = 2432, .hw_value = 5 },
+ { .center_freq = 2437, .hw_value = 6 },
+ { .center_freq = 2442, .hw_value = 7 },
+ { .center_freq = 2447, .hw_value = 8 },
+ { .center_freq = 2452, .hw_value = 9 },
+ { .center_freq = 2457, .hw_value = 10 },
+ { .center_freq = 2462, .hw_value = 11 },
+ { .center_freq = 2467, .hw_value = 12 },
+ { .center_freq = 2472, .hw_value = 13 },
+ { .center_freq = 2484, .hw_value = 14 }
+};
+
+static struct ieee80211_supported_band at76_supported_band = {
+ .channels = at76_channels,
+ .n_channels = ARRAY_SIZE(at76_channels),
+ .bitrates = at76_rates,
+ .n_bitrates = ARRAY_SIZE(at76_rates),
+};
+
+/* Register network device and initialize the hardware */
+static int at76_init_new_device(struct at76_priv *priv,
+ struct usb_interface *interface)
+{
+ struct wiphy *wiphy;
+ size_t len;
+ int ret;
+
+ /* set up the endpoint information */
+ /* check out the endpoints */
+
+ at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints",
+ interface->cur_altsetting->desc.bNumEndpoints);
+
+ ret = at76_alloc_urbs(priv, interface);
+ if (ret < 0)
+ goto exit;
+
+ /* MAC address */
+ ret = at76_get_hw_config(priv);
+ if (ret < 0) {
+ dev_err(&interface->dev, "cannot get MAC address\n");
+ goto exit;
+ }
+
+ priv->domain = at76_get_reg_domain(priv->regulatory_domain);
+
+ priv->channel = DEF_CHANNEL;
+ priv->iw_mode = IW_MODE_INFRA;
+ priv->rts_threshold = DEF_RTS_THRESHOLD;
+ priv->frag_threshold = DEF_FRAG_THRESHOLD;
+ priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT;
+ priv->txrate = TX_RATE_AUTO;
+ priv->preamble_type = PREAMBLE_TYPE_LONG;
+ priv->beacon_period = 100;
+ priv->auth_mode = WLAN_AUTH_OPEN;
+ priv->scan_min_time = DEF_SCAN_MIN_TIME;
+ priv->scan_max_time = DEF_SCAN_MAX_TIME;
+ priv->scan_mode = SCAN_TYPE_ACTIVE;
+ priv->device_unplugged = 0;
+
+ /* mac80211 initialisation */
+ wiphy = priv->hw->wiphy;
+ priv->hw->wiphy->max_scan_ssids = 1;
+ priv->hw->wiphy->max_scan_ie_len = 0;
+ priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ priv->hw->wiphy->bands[NL80211_BAND_2GHZ] = &at76_supported_band;
+ ieee80211_hw_set(priv->hw, RX_INCLUDES_FCS);
+ ieee80211_hw_set(priv->hw, SIGNAL_UNSPEC);
+ priv->hw->max_signal = 100;
+
+ SET_IEEE80211_DEV(priv->hw, &interface->dev);
+ SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
+
+ len = sizeof(wiphy->fw_version);
+ snprintf(wiphy->fw_version, len, "%d.%d.%d-%d",
+ priv->fw_version.major, priv->fw_version.minor,
+ priv->fw_version.patch, priv->fw_version.build);
+
+ wiphy->hw_version = priv->board_type;
+
+ wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+
+ ret = ieee80211_register_hw(priv->hw);
+ if (ret) {
+ printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
+ ret);
+ goto exit;
+ }
+
+ priv->mac80211_registered = 1;
+
+ wiphy_info(priv->hw->wiphy, "USB %s, MAC %pM, firmware %d.%d.%d-%d\n",
+ dev_name(&interface->dev), priv->mac_addr,
+ priv->fw_version.major, priv->fw_version.minor,
+ priv->fw_version.patch, priv->fw_version.build);
+ wiphy_info(priv->hw->wiphy, "regulatory domain 0x%02x: %s\n",
+ priv->regulatory_domain, priv->domain->name);
+
+exit:
+ return ret;
+}
+
+static void at76_delete_device(struct at76_priv *priv)
+{
+ at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
+
+ /* The device is gone, don't bother turning it off */
+ priv->device_unplugged = 1;
+
+ tasklet_kill(&priv->rx_tasklet);
+
+ if (priv->mac80211_registered)
+ ieee80211_unregister_hw(priv->hw);
+
+ if (priv->tx_urb) {
+ usb_kill_urb(priv->tx_urb);
+ usb_free_urb(priv->tx_urb);
+ }
+ if (priv->rx_urb) {
+ usb_kill_urb(priv->rx_urb);
+ usb_free_urb(priv->rx_urb);
+ }
+
+ at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);
+
+ kfree(priv->bulk_out_buffer);
+
+ del_timer_sync(&ledtrig_tx_timer);
+
+ kfree_skb(priv->rx_skb);
+
+ at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw",
+ __func__);
+ ieee80211_free_hw(priv->hw);
+
+ at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
+}
+
+static int at76_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ int ret;
+ struct at76_priv *priv;
+ struct fwentry *fwe;
+ struct usb_device *udev;
+ int op_mode;
+ int need_ext_fw = 0;
+ struct mib_fw_version *fwv = NULL;
+ int board_type = (int)id->driver_info;
+
+ udev = usb_get_dev(interface_to_usbdev(interface));
+
+ fwv = kmalloc(sizeof(*fwv), GFP_KERNEL);
+ if (!fwv) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ /* Load firmware into kernel memory */
+ fwe = at76_load_firmware(udev, board_type);
+ if (!fwe) {
+ ret = -ENOENT;
+ goto exit;
+ }
+
+ op_mode = at76_get_op_mode(udev);
+
+ at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
+
+ /* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ???
+ we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
+
+ if (op_mode == OPMODE_HW_CONFIG_MODE) {
+ dev_err(&interface->dev,
+ "cannot handle a device in HW_CONFIG_MODE\n");
+ ret = -EBUSY;
+ goto exit;
+ }
+
+ if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
+ && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
+ /* download internal firmware part */
+ dev_printk(KERN_DEBUG, &interface->dev,
+ "downloading internal firmware\n");
+ ret = at76_load_internal_fw(udev, fwe);
+ if (ret < 0) {
+ dev_err(&interface->dev,
+ "error %d downloading internal firmware\n",
+ ret);
+ }
+ goto exit;
+ }
+
+ /* Internal firmware already inside the device. Get firmware
+ * version to test if external firmware is loaded.
+ * This works only for newer firmware, e.g. the Intersil 0.90.x
+ * says "control timeout on ep0in" and subsequent
+ * at76_get_op_mode() fail too :-( */
+
+ /* if version >= 0.100.x.y or device with built-in flash we can
+ * query the device for the fw version */
+ if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100)
+ || (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) {
+ ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv));
+ if (ret < 0 || (fwv->major | fwv->minor) == 0)
+ need_ext_fw = 1;
+ } else
+ /* No way to check firmware version, reload to be sure */
+ need_ext_fw = 1;
+
+ if (need_ext_fw) {
+ dev_printk(KERN_DEBUG, &interface->dev,
+ "downloading external firmware\n");
+
+ ret = at76_load_external_fw(udev, fwe);
+ if (ret < 0)
+ goto exit;
+
+ /* Re-check firmware version */
+ ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv));
+ if (ret < 0) {
+ dev_err(&interface->dev,
+ "error %d getting firmware version\n", ret);
+ goto exit;
+ }
+ }
+
+ priv = at76_alloc_new_device(udev);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ usb_set_intfdata(interface, priv);
+
+ memcpy(&priv->fw_version, fwv, sizeof(struct mib_fw_version));
+ priv->board_type = board_type;
+
+ ret = at76_init_new_device(priv, interface);
+ if (ret < 0)
+ at76_delete_device(priv);
+
+exit:
+ kfree(fwv);
+ if (ret < 0)
+ usb_put_dev(udev);
+ return ret;
+}
+
+static void at76_disconnect(struct usb_interface *interface)
+{
+ struct at76_priv *priv;
+
+ priv = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ /* Disconnect after loading internal firmware */
+ if (!priv)
+ return;
+
+ wiphy_info(priv->hw->wiphy, "disconnecting\n");
+ at76_delete_device(priv);
+ usb_put_dev(priv->udev);
+ dev_info(&interface->dev, "disconnected\n");
+}
+
+/* Structure for registering this driver with the USB subsystem */
+static struct usb_driver at76_driver = {
+ .name = DRIVER_NAME,
+ .probe = at76_probe,
+ .disconnect = at76_disconnect,
+ .id_table = dev_table,
+ .disable_hub_initiated_lpm = 1,
+};
+
+static int __init at76_mod_init(void)
+{
+ int result;
+
+ printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n");
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&at76_driver);
+ if (result < 0)
+ printk(KERN_ERR DRIVER_NAME
+ ": usb_register failed (status %d)\n", result);
+ else
+ led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
+ return result;
+}
+
+static void __exit at76_mod_exit(void)
+{
+ int i;
+
+ printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n");
+ usb_deregister(&at76_driver);
+ for (i = 0; i < ARRAY_SIZE(firmwares); i++)
+ release_firmware(firmwares[i].fw);
+ led_trigger_unregister_simple(ledtrig_tx);
+}
+
+module_param_named(debug, at76_debug, uint, 0600);
+MODULE_PARM_DESC(debug, "Debugging level");
+
+module_init(at76_mod_init);
+module_exit(at76_mod_exit);
+
+MODULE_AUTHOR("Oliver Kurth <oku@masqmail.cx>");
+MODULE_AUTHOR("Joerg Albert <joerg.albert@gmx.de>");
+MODULE_AUTHOR("Alex <alex@foogod.com>");
+MODULE_AUTHOR("Nick Jones");
+MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>");
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
+MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
+MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>");
+MODULE_AUTHOR("Sebastian Smolorz <sesmo@gmx.net>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/atmel/at76c50x-usb.h b/drivers/net/wireless/atmel/at76c50x-usb.h
new file mode 100644
index 0000000000..746e64dfd8
--- /dev/null
+++ b/drivers/net/wireless/atmel/at76c50x-usb.h
@@ -0,0 +1,462 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2002,2003 Oliver Kurth
+ * (c) 2003,2004 Joerg Albert <joerg.albert@gmx.de>
+ * (c) 2007 Guido Guenther <agx@sigxcpu.org>
+ *
+ * This driver was based on information from the Sourceforge driver
+ * released and maintained by Atmel:
+ *
+ * http://sourceforge.net/projects/atmelwlandriver/
+ *
+ * Although the code was completely re-written,
+ * it would have been impossible without Atmel's decision to
+ * release an Open Source driver (unfortunately the firmware was
+ * kept binary only). Thanks for that decision to Atmel!
+ */
+
+#ifndef _AT76_USB_H
+#define _AT76_USB_H
+
+/* Board types */
+enum board_type {
+ BOARD_503_ISL3861 = 1,
+ BOARD_503_ISL3863 = 2,
+ BOARD_503 = 3,
+ BOARD_503_ACC = 4,
+ BOARD_505 = 5,
+ BOARD_505_2958 = 6,
+ BOARD_505A = 7,
+ BOARD_505AMX = 8
+};
+
+#define CMD_STATUS_IDLE 0x00
+#define CMD_STATUS_COMPLETE 0x01
+#define CMD_STATUS_UNKNOWN 0x02
+#define CMD_STATUS_INVALID_PARAMETER 0x03
+#define CMD_STATUS_FUNCTION_NOT_SUPPORTED 0x04
+#define CMD_STATUS_TIME_OUT 0x07
+#define CMD_STATUS_IN_PROGRESS 0x08
+#define CMD_STATUS_HOST_FAILURE 0xff
+#define CMD_STATUS_SCAN_FAILED 0xf0
+
+/* answers to get op mode */
+#define OPMODE_NONE 0x00
+#define OPMODE_NORMAL_NIC_WITH_FLASH 0x01
+#define OPMODE_HW_CONFIG_MODE 0x02
+#define OPMODE_DFU_MODE_WITH_FLASH 0x03
+#define OPMODE_NORMAL_NIC_WITHOUT_FLASH 0x04
+
+#define CMD_SET_MIB 0x01
+#define CMD_GET_MIB 0x02
+#define CMD_SCAN 0x03
+#define CMD_JOIN 0x04
+#define CMD_START_IBSS 0x05
+#define CMD_RADIO_ON 0x06
+#define CMD_RADIO_OFF 0x07
+#define CMD_STARTUP 0x0B
+
+#define MIB_LOCAL 0x01
+#define MIB_MAC_ADDR 0x02
+#define MIB_MAC 0x03
+#define MIB_MAC_MGMT 0x05
+#define MIB_MAC_WEP 0x06
+#define MIB_PHY 0x07
+#define MIB_FW_VERSION 0x08
+#define MIB_MDOMAIN 0x09
+
+#define ADHOC_MODE 1
+#define INFRASTRUCTURE_MODE 2
+
+/* values for struct mib_local, field preamble_type */
+#define PREAMBLE_TYPE_LONG 0
+#define PREAMBLE_TYPE_SHORT 1
+#define PREAMBLE_TYPE_AUTO 2
+
+/* values for tx_rate */
+#define TX_RATE_1MBIT 0
+#define TX_RATE_2MBIT 1
+#define TX_RATE_5_5MBIT 2
+#define TX_RATE_11MBIT 3
+#define TX_RATE_AUTO 4
+
+/* power management modes */
+#define AT76_PM_OFF 1
+#define AT76_PM_ON 2
+#define AT76_PM_SMART 3
+
+struct hwcfg_r505 {
+ u8 cr39_values[14];
+ u8 reserved1[14];
+ u8 bb_cr[14];
+ u8 pidvid[4];
+ u8 mac_addr[ETH_ALEN];
+ u8 regulatory_domain;
+ u8 reserved2[14];
+ u8 cr15_values[14];
+ u8 reserved3[3];
+} __packed;
+
+struct hwcfg_rfmd {
+ u8 cr20_values[14];
+ u8 cr21_values[14];
+ u8 bb_cr[14];
+ u8 pidvid[4];
+ u8 mac_addr[ETH_ALEN];
+ u8 regulatory_domain;
+ u8 low_power_values[14];
+ u8 normal_power_values[14];
+ u8 reserved1[3];
+} __packed;
+
+struct hwcfg_intersil {
+ u8 mac_addr[ETH_ALEN];
+ u8 cr31_values[14];
+ u8 cr58_values[14];
+ u8 pidvid[4];
+ u8 regulatory_domain;
+ u8 reserved[1];
+} __packed;
+
+union at76_hwcfg {
+ struct hwcfg_intersil i;
+ struct hwcfg_rfmd r3;
+ struct hwcfg_r505 r5;
+};
+
+#define WEP_SMALL_KEY_LEN (40 / 8)
+#define WEP_LARGE_KEY_LEN (104 / 8)
+#define WEP_KEYS (4)
+
+struct at76_card_config {
+ u8 exclude_unencrypted;
+ u8 promiscuous_mode;
+ u8 short_retry_limit;
+ u8 encryption_type;
+ __le16 rts_threshold;
+ __le16 fragmentation_threshold; /* 256..2346 */
+ u8 basic_rate_set[4];
+ u8 auto_rate_fallback; /* 0,1 */
+ u8 channel;
+ u8 privacy_invoked;
+ u8 wep_default_key_id; /* 0..3 */
+ u8 current_ssid[32];
+ u8 wep_default_key_value[4][WEP_LARGE_KEY_LEN];
+ u8 ssid_len;
+ u8 short_preamble;
+ __le16 beacon_period;
+} __packed;
+
+struct at76_command {
+ u8 cmd;
+ u8 reserved;
+ __le16 size;
+ u8 data[];
+} __packed;
+
+/* Length of Atmel-specific Rx header before 802.11 frame */
+#define AT76_RX_HDRLEN offsetof(struct at76_rx_buffer, packet)
+
+struct at76_rx_buffer {
+ __le16 wlength;
+ u8 rx_rate;
+ u8 newbss;
+ u8 fragmentation;
+ u8 rssi;
+ u8 link_quality;
+ u8 noise_level;
+ __le32 rx_time;
+ u8 packet[IEEE80211_MAX_FRAG_THRESHOLD];
+} __packed;
+
+/* Length of Atmel-specific Tx header before 802.11 frame */
+#define AT76_TX_HDRLEN offsetof(struct at76_tx_buffer, packet)
+
+struct at76_tx_buffer {
+ __le16 wlength;
+ u8 tx_rate;
+ u8 padding;
+ u8 reserved[4];
+ u8 packet[IEEE80211_MAX_FRAG_THRESHOLD];
+} __packed;
+
+/* defines for scan_type below */
+#define SCAN_TYPE_ACTIVE 0
+#define SCAN_TYPE_PASSIVE 1
+
+struct at76_req_scan {
+ u8 bssid[ETH_ALEN];
+ u8 essid[32];
+ u8 scan_type;
+ u8 channel;
+ __le16 probe_delay;
+ __le16 min_channel_time;
+ __le16 max_channel_time;
+ u8 essid_size;
+ u8 international_scan;
+} __packed;
+
+struct at76_req_ibss {
+ u8 bssid[ETH_ALEN];
+ u8 essid[32];
+ u8 bss_type;
+ u8 channel;
+ u8 essid_size;
+ u8 reserved[3];
+} __packed;
+
+struct at76_req_join {
+ u8 bssid[ETH_ALEN];
+ u8 essid[32];
+ u8 bss_type;
+ u8 channel;
+ __le16 timeout;
+ u8 essid_size;
+ u8 reserved;
+} __packed;
+
+struct mib_local {
+ u16 reserved0;
+ u8 beacon_enable;
+ u8 txautorate_fallback;
+ u8 reserved1;
+ u8 ssid_size;
+ u8 promiscuous_mode;
+ u16 reserved2;
+ u8 preamble_type;
+ u16 reserved3;
+} __packed;
+
+struct mib_mac_addr {
+ u8 mac_addr[ETH_ALEN];
+ u8 res[2]; /* ??? */
+ u8 group_addr[4][ETH_ALEN];
+ u8 group_addr_status[4];
+} __packed;
+
+struct mib_mac {
+ __le32 max_tx_msdu_lifetime;
+ __le32 max_rx_lifetime;
+ __le16 frag_threshold;
+ __le16 rts_threshold;
+ __le16 cwmin;
+ __le16 cwmax;
+ u8 short_retry_time;
+ u8 long_retry_time;
+ u8 scan_type; /* active or passive */
+ u8 scan_channel;
+ __le16 probe_delay; /* delay before ProbeReq in active scan, RO */
+ __le16 min_channel_time;
+ __le16 max_channel_time;
+ __le16 listen_interval;
+ u8 desired_ssid[32];
+ u8 desired_bssid[ETH_ALEN];
+ u8 desired_bsstype; /* ad-hoc or infrastructure */
+ u8 reserved2;
+} __packed;
+
+struct mib_mac_mgmt {
+ __le16 beacon_period;
+ __le16 CFP_max_duration;
+ __le16 medium_occupancy_limit;
+ __le16 station_id; /* assoc id */
+ __le16 ATIM_window;
+ u8 CFP_mode;
+ u8 privacy_option_implemented;
+ u8 DTIM_period;
+ u8 CFP_period;
+ u8 current_bssid[ETH_ALEN];
+ u8 current_essid[32];
+ u8 current_bss_type;
+ u8 power_mgmt_mode;
+ /* rfmd and 505 */
+ u8 ibss_change;
+ u8 res;
+ u8 multi_domain_capability_implemented;
+ u8 multi_domain_capability_enabled;
+ u8 country_string[IEEE80211_COUNTRY_STRING_LEN];
+ u8 reserved[3];
+} __packed;
+
+struct mib_mac_wep {
+ u8 privacy_invoked; /* 0 disable encr., 1 enable encr */
+ u8 wep_default_key_id;
+ u8 wep_key_mapping_len;
+ u8 exclude_unencrypted;
+ __le32 wep_icv_error_count;
+ __le32 wep_excluded_count;
+ u8 wep_default_keyvalue[WEP_KEYS][WEP_LARGE_KEY_LEN];
+ u8 encryption_level; /* 1 for 40bit, 2 for 104bit encryption */
+} __packed;
+
+struct mib_phy {
+ __le32 ed_threshold;
+
+ __le16 slot_time;
+ __le16 sifs_time;
+ __le16 preamble_length;
+ __le16 plcp_header_length;
+ __le16 mpdu_max_length;
+ __le16 cca_mode_supported;
+
+ u8 operation_rate_set[4];
+ u8 channel_id;
+ u8 current_cca_mode;
+ u8 phy_type;
+ u8 current_reg_domain;
+} __packed;
+
+struct mib_fw_version {
+ u8 major;
+ u8 minor;
+ u8 patch;
+ u8 build;
+} __packed;
+
+struct mib_mdomain {
+ u8 tx_powerlevel[14];
+ u8 channel_list[14]; /* 0 for invalid channels */
+} __packed;
+
+struct set_mib_buffer {
+ u8 type;
+ u8 size;
+ u8 index;
+ u8 reserved;
+ union {
+ u8 byte;
+ __le16 word;
+ u8 addr[ETH_ALEN];
+ struct mib_mac_wep wep_mib;
+ } data;
+} __packed;
+
+struct at76_fw_header {
+ __le32 crc; /* CRC32 of the whole image */
+ __le32 board_type; /* firmware compatibility code */
+ u8 build; /* firmware build number */
+ u8 patch; /* firmware patch level */
+ u8 minor; /* firmware minor version */
+ u8 major; /* firmware major version */
+ __le32 str_offset; /* offset of the copyright string */
+ __le32 int_fw_offset; /* internal firmware image offset */
+ __le32 int_fw_len; /* internal firmware image length */
+ __le32 ext_fw_offset; /* external firmware image offset */
+ __le32 ext_fw_len; /* external firmware image length */
+} __packed;
+
+/* a description of a regulatory domain and the allowed channels */
+struct reg_domain {
+ u16 code;
+ char const *name;
+ u32 channel_map; /* if bit N is set, channel (N+1) is allowed */
+};
+
+/* Data for one loaded firmware file */
+struct fwentry {
+ const char *const fwname;
+ const struct firmware *fw;
+ int extfw_size;
+ int intfw_size;
+ /* pointer to loaded firmware, no need to free */
+ u8 *extfw; /* external firmware, extfw_size bytes long */
+ u8 *intfw; /* internal firmware, intfw_size bytes long */
+ enum board_type board_type; /* board type */
+ struct mib_fw_version fw_version;
+ int loaded; /* Loaded and parsed successfully */
+};
+
+struct at76_priv {
+ struct usb_device *udev; /* USB device pointer */
+
+ struct sk_buff *rx_skb; /* skbuff for receiving data */
+ struct sk_buff *tx_skb; /* skbuff for transmitting data */
+ void *bulk_out_buffer; /* buffer for sending data */
+
+ struct urb *tx_urb; /* URB for sending data */
+ struct urb *rx_urb; /* URB for receiving data */
+
+ unsigned int tx_pipe; /* bulk out pipe */
+ unsigned int rx_pipe; /* bulk in pipe */
+
+ struct mutex mtx; /* locks this structure */
+
+ /* work queues */
+ struct work_struct work_set_promisc;
+ struct work_struct work_submit_rx;
+ struct work_struct work_join_bssid;
+ struct delayed_work dwork_hw_scan;
+
+ struct tasklet_struct rx_tasklet;
+
+ /* the WEP stuff */
+ int wep_enabled; /* 1 if WEP is enabled */
+ int wep_key_id; /* key id to be used */
+ u8 wep_keys[WEP_KEYS][WEP_LARGE_KEY_LEN]; /* WEP keys */
+ u8 wep_keys_len[WEP_KEYS]; /* length of WEP keys */
+
+ int channel;
+ int iw_mode;
+ u8 bssid[ETH_ALEN];
+ u8 essid[IW_ESSID_MAX_SIZE];
+ int essid_size;
+ int radio_on;
+ int promisc;
+
+ int preamble_type; /* 0 - long, 1 - short, 2 - auto */
+ int auth_mode; /* authentication type: 0 open, 1 shared key */
+ int txrate; /* 0,1,2,3 = 1,2,5.5,11 Mbps, 4 is auto */
+ int frag_threshold; /* threshold for fragmentation of tx packets */
+ int rts_threshold; /* threshold for RTS mechanism */
+ int short_retry_limit;
+
+ int scan_min_time; /* scan min channel time */
+ int scan_max_time; /* scan max channel time */
+ int scan_mode; /* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */
+ int scan_need_any; /* if set, need to scan for any ESSID */
+ bool scanning; /* if set, the scan is running */
+
+ u16 assoc_id; /* current association ID, if associated */
+
+ u8 pm_mode; /* power management mode */
+ u32 pm_period; /* power management period in microseconds */
+
+ struct reg_domain const *domain; /* reg domain description */
+
+ /* These fields contain HW config provided by the device (not all of
+ * these fields are used by all board types) */
+ u8 mac_addr[ETH_ALEN];
+ u8 regulatory_domain;
+
+ struct at76_card_config card_config;
+
+ enum board_type board_type;
+ struct mib_fw_version fw_version;
+
+ unsigned int device_unplugged:1;
+ unsigned int netdev_registered:1;
+ struct set_mib_buffer mib_buf; /* global buffer for set_mib calls */
+
+ int beacon_period; /* period of mgmt beacons, Kus */
+
+ struct ieee80211_hw *hw;
+ int mac80211_registered;
+};
+
+#define AT76_SUPPORTED_FILTERS 0
+
+#define SCAN_POLL_INTERVAL (HZ / 4)
+
+#define CMD_COMPLETION_TIMEOUT (5 * HZ)
+
+#define DEF_RTS_THRESHOLD 1536
+#define DEF_FRAG_THRESHOLD 1536
+#define DEF_SHORT_RETRY_LIMIT 8
+#define DEF_CHANNEL 10
+#define DEF_SCAN_MIN_TIME 10
+#define DEF_SCAN_MAX_TIME 120
+
+/* the max padding size for tx in bytes (see calc_padding) */
+#define MAX_PADDING_SIZE 53
+
+#endif /* _AT76_USB_H */
diff --git a/drivers/net/wireless/atmel/atmel.c b/drivers/net/wireless/atmel/atmel.c
new file mode 100644
index 0000000000..7c2d1c5881
--- /dev/null
+++ b/drivers/net/wireless/atmel/atmel.c
@@ -0,0 +1,4524 @@
+/*** -*- linux-c -*- **********************************************************
+
+ Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+ Copyright 2000-2001 ATMEL Corporation.
+ Copyright 2003-2004 Simon Kelley.
+
+ This code was developed from version 2.1.1 of the Atmel drivers,
+ released by Atmel corp. under the GPL in December 2002. It also
+ includes code from the Linux aironet drivers (C) Benjamin Reed,
+ and the Linux PCMCIA package, (C) David Hinds and the Linux wireless
+ extensions, (C) Jean Tourrilhes.
+
+ The firmware module for reading the MAC address of the card comes from
+ net.russotto.AtmelMACFW, written by Matthew T. Russotto and copyright
+ by him. net.russotto.AtmelMACFW is used under the GPL license version 2.
+ This file contains the module in binary form and, under the terms
+ of the GPL, in source form. The source is located at the end of the file.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Atmel wireless lan drivers; if not, see
+ <http://www.gnu.org/licenses/>.
+
+ For all queries about this code, please contact the current author,
+ Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
+
+ Credit is due to HP UK and Cambridge Online Systems Ltd for supplying
+ hardware used during development of this driver.
+
+******************************************************************************/
+
+#include <linux/interrupt.h>
+
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/delay.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <linux/crc32.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <net/cfg80211.h>
+#include "atmel.h"
+
+#define DRIVER_MAJOR 0
+#define DRIVER_MINOR 98
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+
+/* The name of the firmware file to be loaded
+ over-rides any automatic selection */
+static char *firmware = NULL;
+module_param(firmware, charp, 0);
+
+/* table of firmware file names */
+static struct {
+ AtmelFWType fw_type;
+ const char *fw_file;
+ const char *fw_file_ext;
+} fw_table[] = {
+ { ATMEL_FW_TYPE_502, "atmel_at76c502", "bin" },
+ { ATMEL_FW_TYPE_502D, "atmel_at76c502d", "bin" },
+ { ATMEL_FW_TYPE_502E, "atmel_at76c502e", "bin" },
+ { ATMEL_FW_TYPE_502_3COM, "atmel_at76c502_3com", "bin" },
+ { ATMEL_FW_TYPE_504, "atmel_at76c504", "bin" },
+ { ATMEL_FW_TYPE_504_2958, "atmel_at76c504_2958", "bin" },
+ { ATMEL_FW_TYPE_504A_2958, "atmel_at76c504a_2958", "bin" },
+ { ATMEL_FW_TYPE_506, "atmel_at76c506", "bin" },
+ { ATMEL_FW_TYPE_NONE, NULL, NULL }
+};
+MODULE_FIRMWARE("atmel_at76c502-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502.bin");
+MODULE_FIRMWARE("atmel_at76c502d-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502d.bin");
+MODULE_FIRMWARE("atmel_at76c502e-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502e.bin");
+MODULE_FIRMWARE("atmel_at76c502_3com-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502_3com.bin");
+MODULE_FIRMWARE("atmel_at76c504-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c504.bin");
+MODULE_FIRMWARE("atmel_at76c504_2958-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c504_2958.bin");
+MODULE_FIRMWARE("atmel_at76c504a_2958-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c504a_2958.bin");
+MODULE_FIRMWARE("atmel_at76c506-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c506.bin");
+
+#define MAX_SSID_LENGTH 32
+#define MGMT_JIFFIES (256 * HZ / 100)
+
+#define MAX_BSS_ENTRIES 64
+
+/* registers */
+#define GCR 0x00 /* (SIR0) General Configuration Register */
+#define BSR 0x02 /* (SIR1) Bank Switching Select Register */
+#define AR 0x04
+#define DR 0x08
+#define MR1 0x12 /* Mirror Register 1 */
+#define MR2 0x14 /* Mirror Register 2 */
+#define MR3 0x16 /* Mirror Register 3 */
+#define MR4 0x18 /* Mirror Register 4 */
+
+#define GPR1 0x0c
+#define GPR2 0x0e
+#define GPR3 0x10
+/*
+ * Constants for the GCR register.
+ */
+#define GCR_REMAP 0x0400 /* Remap internal SRAM to 0 */
+#define GCR_SWRES 0x0080 /* BIU reset (ARM and PAI are NOT reset) */
+#define GCR_CORES 0x0060 /* Core Reset (ARM and PAI are reset) */
+#define GCR_ENINT 0x0002 /* Enable Interrupts */
+#define GCR_ACKINT 0x0008 /* Acknowledge Interrupts */
+
+#define BSS_SRAM 0x0200 /* AMBA module selection --> SRAM */
+#define BSS_IRAM 0x0100 /* AMBA module selection --> IRAM */
+/*
+ *Constants for the MR registers.
+ */
+#define MAC_INIT_COMPLETE 0x0001 /* MAC init has been completed */
+#define MAC_BOOT_COMPLETE 0x0010 /* MAC boot has been completed */
+#define MAC_INIT_OK 0x0002 /* MAC boot has been completed */
+
+#define MIB_MAX_DATA_BYTES 212
+#define MIB_HEADER_SIZE 4 /* first four fields */
+
+struct get_set_mib {
+ u8 type;
+ u8 size;
+ u8 index;
+ u8 reserved;
+ u8 data[MIB_MAX_DATA_BYTES];
+};
+
+struct rx_desc {
+ u32 Next;
+ u16 MsduPos;
+ u16 MsduSize;
+
+ u8 State;
+ u8 Status;
+ u8 Rate;
+ u8 Rssi;
+ u8 LinkQuality;
+ u8 PreambleType;
+ u16 Duration;
+ u32 RxTime;
+};
+
+#define RX_DESC_FLAG_VALID 0x80
+#define RX_DESC_FLAG_CONSUMED 0x40
+#define RX_DESC_FLAG_IDLE 0x00
+
+#define RX_STATUS_SUCCESS 0x00
+
+#define RX_DESC_MSDU_POS_OFFSET 4
+#define RX_DESC_MSDU_SIZE_OFFSET 6
+#define RX_DESC_FLAGS_OFFSET 8
+#define RX_DESC_STATUS_OFFSET 9
+#define RX_DESC_RSSI_OFFSET 11
+#define RX_DESC_LINK_QUALITY_OFFSET 12
+#define RX_DESC_PREAMBLE_TYPE_OFFSET 13
+#define RX_DESC_DURATION_OFFSET 14
+#define RX_DESC_RX_TIME_OFFSET 16
+
+struct tx_desc {
+ u32 NextDescriptor;
+ u16 TxStartOfFrame;
+ u16 TxLength;
+
+ u8 TxState;
+ u8 TxStatus;
+ u8 RetryCount;
+
+ u8 TxRate;
+
+ u8 KeyIndex;
+ u8 ChiperType;
+ u8 ChipreLength;
+ u8 Reserved1;
+
+ u8 Reserved;
+ u8 PacketType;
+ u16 HostTxLength;
+};
+
+#define TX_DESC_NEXT_OFFSET 0
+#define TX_DESC_POS_OFFSET 4
+#define TX_DESC_SIZE_OFFSET 6
+#define TX_DESC_FLAGS_OFFSET 8
+#define TX_DESC_STATUS_OFFSET 9
+#define TX_DESC_RETRY_OFFSET 10
+#define TX_DESC_RATE_OFFSET 11
+#define TX_DESC_KEY_INDEX_OFFSET 12
+#define TX_DESC_CIPHER_TYPE_OFFSET 13
+#define TX_DESC_CIPHER_LENGTH_OFFSET 14
+#define TX_DESC_PACKET_TYPE_OFFSET 17
+#define TX_DESC_HOST_LENGTH_OFFSET 18
+
+/*
+ * Host-MAC interface
+ */
+
+#define TX_STATUS_SUCCESS 0x00
+
+#define TX_FIRM_OWN 0x80
+#define TX_DONE 0x40
+
+#define TX_ERROR 0x01
+
+#define TX_PACKET_TYPE_DATA 0x01
+#define TX_PACKET_TYPE_MGMT 0x02
+
+#define ISR_EMPTY 0x00 /* no bits set in ISR */
+#define ISR_TxCOMPLETE 0x01 /* packet transmitted */
+#define ISR_RxCOMPLETE 0x02 /* packet received */
+#define ISR_RxFRAMELOST 0x04 /* Rx Frame lost */
+#define ISR_FATAL_ERROR 0x08 /* Fatal error */
+#define ISR_COMMAND_COMPLETE 0x10 /* command completed */
+#define ISR_OUT_OF_RANGE 0x20 /* command completed */
+#define ISR_IBSS_MERGE 0x40 /* (4.1.2.30): IBSS merge */
+#define ISR_GENERIC_IRQ 0x80
+
+#define Local_Mib_Type 0x01
+#define Mac_Address_Mib_Type 0x02
+#define Mac_Mib_Type 0x03
+#define Statistics_Mib_Type 0x04
+#define Mac_Mgmt_Mib_Type 0x05
+#define Mac_Wep_Mib_Type 0x06
+#define Phy_Mib_Type 0x07
+#define Multi_Domain_MIB 0x08
+
+#define MAC_MGMT_MIB_CUR_BSSID_POS 14
+#define MAC_MIB_FRAG_THRESHOLD_POS 8
+#define MAC_MIB_RTS_THRESHOLD_POS 10
+#define MAC_MIB_SHORT_RETRY_POS 16
+#define MAC_MIB_LONG_RETRY_POS 17
+#define MAC_MIB_SHORT_RETRY_LIMIT_POS 16
+#define MAC_MGMT_MIB_BEACON_PER_POS 0
+#define MAC_MGMT_MIB_STATION_ID_POS 6
+#define MAC_MGMT_MIB_CUR_PRIVACY_POS 11
+#define MAC_MGMT_MIB_CUR_BSSID_POS 14
+#define MAC_MGMT_MIB_PS_MODE_POS 53
+#define MAC_MGMT_MIB_LISTEN_INTERVAL_POS 54
+#define MAC_MGMT_MIB_MULTI_DOMAIN_IMPLEMENTED 56
+#define MAC_MGMT_MIB_MULTI_DOMAIN_ENABLED 57
+#define PHY_MIB_CHANNEL_POS 14
+#define PHY_MIB_RATE_SET_POS 20
+#define PHY_MIB_REG_DOMAIN_POS 26
+#define LOCAL_MIB_AUTO_TX_RATE_POS 3
+#define LOCAL_MIB_SSID_SIZE 5
+#define LOCAL_MIB_TX_PROMISCUOUS_POS 6
+#define LOCAL_MIB_TX_MGMT_RATE_POS 7
+#define LOCAL_MIB_TX_CONTROL_RATE_POS 8
+#define LOCAL_MIB_PREAMBLE_TYPE 9
+#define MAC_ADDR_MIB_MAC_ADDR_POS 0
+
+#define CMD_Set_MIB_Vars 0x01
+#define CMD_Get_MIB_Vars 0x02
+#define CMD_Scan 0x03
+#define CMD_Join 0x04
+#define CMD_Start 0x05
+#define CMD_EnableRadio 0x06
+#define CMD_DisableRadio 0x07
+#define CMD_SiteSurvey 0x0B
+
+#define CMD_STATUS_IDLE 0x00
+#define CMD_STATUS_COMPLETE 0x01
+#define CMD_STATUS_UNKNOWN 0x02
+#define CMD_STATUS_INVALID_PARAMETER 0x03
+#define CMD_STATUS_FUNCTION_NOT_SUPPORTED 0x04
+#define CMD_STATUS_TIME_OUT 0x07
+#define CMD_STATUS_IN_PROGRESS 0x08
+#define CMD_STATUS_REJECTED_RADIO_OFF 0x09
+#define CMD_STATUS_HOST_ERROR 0xFF
+#define CMD_STATUS_BUSY 0xFE
+
+#define CMD_BLOCK_COMMAND_OFFSET 0
+#define CMD_BLOCK_STATUS_OFFSET 1
+#define CMD_BLOCK_PARAMETERS_OFFSET 4
+
+#define SCAN_OPTIONS_SITE_SURVEY 0x80
+
+#define MGMT_FRAME_BODY_OFFSET 24
+#define MAX_AUTHENTICATION_RETRIES 3
+#define MAX_ASSOCIATION_RETRIES 3
+
+#define AUTHENTICATION_RESPONSE_TIME_OUT 1000
+
+#define MAX_WIRELESS_BODY 2316 /* mtu is 2312, CRC is 4 */
+#define LOOP_RETRY_LIMIT 500000
+
+#define ACTIVE_MODE 1
+#define PS_MODE 2
+
+#define MAX_ENCRYPTION_KEYS 4
+#define MAX_ENCRYPTION_KEY_SIZE 40
+
+/*
+ * 802.11 related definitions
+ */
+
+/*
+ * Regulatory Domains
+ */
+
+#define REG_DOMAIN_FCC 0x10 /* Channels 1-11 USA */
+#define REG_DOMAIN_DOC 0x20 /* Channel 1-11 Canada */
+#define REG_DOMAIN_ETSI 0x30 /* Channel 1-13 Europe (ex Spain/France) */
+#define REG_DOMAIN_SPAIN 0x31 /* Channel 10-11 Spain */
+#define REG_DOMAIN_FRANCE 0x32 /* Channel 10-13 France */
+#define REG_DOMAIN_MKK 0x40 /* Channel 14 Japan */
+#define REG_DOMAIN_MKK1 0x41 /* Channel 1-14 Japan(MKK1) */
+#define REG_DOMAIN_ISRAEL 0x50 /* Channel 3-9 ISRAEL */
+
+#define BSS_TYPE_AD_HOC 1
+#define BSS_TYPE_INFRASTRUCTURE 2
+
+#define SCAN_TYPE_ACTIVE 0
+#define SCAN_TYPE_PASSIVE 1
+
+#define LONG_PREAMBLE 0
+#define SHORT_PREAMBLE 1
+#define AUTO_PREAMBLE 2
+
+#define DATA_FRAME_WS_HEADER_SIZE 30
+
+/* promiscuous mode control */
+#define PROM_MODE_OFF 0x0
+#define PROM_MODE_UNKNOWN 0x1
+#define PROM_MODE_CRC_FAILED 0x2
+#define PROM_MODE_DUPLICATED 0x4
+#define PROM_MODE_MGMT 0x8
+#define PROM_MODE_CTRL 0x10
+#define PROM_MODE_BAD_PROTOCOL 0x20
+
+#define IFACE_INT_STATUS_OFFSET 0
+#define IFACE_INT_MASK_OFFSET 1
+#define IFACE_LOCKOUT_HOST_OFFSET 2
+#define IFACE_LOCKOUT_MAC_OFFSET 3
+#define IFACE_FUNC_CTRL_OFFSET 28
+#define IFACE_MAC_STAT_OFFSET 30
+#define IFACE_GENERIC_INT_TYPE_OFFSET 32
+
+#define CIPHER_SUITE_NONE 0
+#define CIPHER_SUITE_WEP_64 1
+#define CIPHER_SUITE_TKIP 2
+#define CIPHER_SUITE_AES 3
+#define CIPHER_SUITE_CCX 4
+#define CIPHER_SUITE_WEP_128 5
+
+/*
+ * IFACE MACROS & definitions
+ */
+
+/*
+ * FuncCtrl field:
+ */
+#define FUNC_CTRL_TxENABLE 0x10
+#define FUNC_CTRL_RxENABLE 0x20
+#define FUNC_CTRL_INIT_COMPLETE 0x01
+
+/* A stub firmware image which reads the MAC address from NVRAM on the card.
+ For copyright information and source see the end of this file. */
+static u8 mac_reader[] = {
+ 0x06, 0x00, 0x00, 0xea, 0x04, 0x00, 0x00, 0xea, 0x03, 0x00, 0x00, 0xea, 0x02, 0x00, 0x00, 0xea,
+ 0x01, 0x00, 0x00, 0xea, 0x00, 0x00, 0x00, 0xea, 0xff, 0xff, 0xff, 0xea, 0xfe, 0xff, 0xff, 0xea,
+ 0xd3, 0x00, 0xa0, 0xe3, 0x00, 0xf0, 0x21, 0xe1, 0x0e, 0x04, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3,
+ 0x81, 0x11, 0xa0, 0xe1, 0x00, 0x10, 0x81, 0xe3, 0x00, 0x10, 0x80, 0xe5, 0x1c, 0x10, 0x90, 0xe5,
+ 0x10, 0x10, 0xc1, 0xe3, 0x1c, 0x10, 0x80, 0xe5, 0x01, 0x10, 0xa0, 0xe3, 0x08, 0x10, 0x80, 0xe5,
+ 0x02, 0x03, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3, 0xb0, 0x10, 0xc0, 0xe1, 0xb4, 0x10, 0xc0, 0xe1,
+ 0xb8, 0x10, 0xc0, 0xe1, 0xbc, 0x10, 0xc0, 0xe1, 0x56, 0xdc, 0xa0, 0xe3, 0x21, 0x00, 0x00, 0xeb,
+ 0x0a, 0x00, 0xa0, 0xe3, 0x1a, 0x00, 0x00, 0xeb, 0x10, 0x00, 0x00, 0xeb, 0x07, 0x00, 0x00, 0xeb,
+ 0x02, 0x03, 0xa0, 0xe3, 0x02, 0x14, 0xa0, 0xe3, 0xb4, 0x10, 0xc0, 0xe1, 0x4c, 0x10, 0x9f, 0xe5,
+ 0xbc, 0x10, 0xc0, 0xe1, 0x10, 0x10, 0xa0, 0xe3, 0xb8, 0x10, 0xc0, 0xe1, 0xfe, 0xff, 0xff, 0xea,
+ 0x00, 0x40, 0x2d, 0xe9, 0x00, 0x20, 0xa0, 0xe3, 0x02, 0x3c, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3,
+ 0x28, 0x00, 0x9f, 0xe5, 0x37, 0x00, 0x00, 0xeb, 0x00, 0x40, 0xbd, 0xe8, 0x1e, 0xff, 0x2f, 0xe1,
+ 0x00, 0x40, 0x2d, 0xe9, 0x12, 0x2e, 0xa0, 0xe3, 0x06, 0x30, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3,
+ 0x02, 0x04, 0xa0, 0xe3, 0x2f, 0x00, 0x00, 0xeb, 0x00, 0x40, 0xbd, 0xe8, 0x1e, 0xff, 0x2f, 0xe1,
+ 0x00, 0x02, 0x00, 0x02, 0x80, 0x01, 0x90, 0xe0, 0x01, 0x00, 0x00, 0x0a, 0x01, 0x00, 0x50, 0xe2,
+ 0xfc, 0xff, 0xff, 0xea, 0x1e, 0xff, 0x2f, 0xe1, 0x80, 0x10, 0xa0, 0xe3, 0xf3, 0x06, 0xa0, 0xe3,
+ 0x00, 0x10, 0x80, 0xe5, 0x00, 0x10, 0xa0, 0xe3, 0x00, 0x10, 0x80, 0xe5, 0x01, 0x10, 0xa0, 0xe3,
+ 0x04, 0x10, 0x80, 0xe5, 0x00, 0x10, 0x80, 0xe5, 0x0e, 0x34, 0xa0, 0xe3, 0x1c, 0x10, 0x93, 0xe5,
+ 0x02, 0x1a, 0x81, 0xe3, 0x1c, 0x10, 0x83, 0xe5, 0x58, 0x11, 0x9f, 0xe5, 0x30, 0x10, 0x80, 0xe5,
+ 0x54, 0x11, 0x9f, 0xe5, 0x34, 0x10, 0x80, 0xe5, 0x38, 0x10, 0x80, 0xe5, 0x3c, 0x10, 0x80, 0xe5,
+ 0x10, 0x10, 0x90, 0xe5, 0x08, 0x00, 0x90, 0xe5, 0x1e, 0xff, 0x2f, 0xe1, 0xf3, 0x16, 0xa0, 0xe3,
+ 0x08, 0x00, 0x91, 0xe5, 0x05, 0x00, 0xa0, 0xe3, 0x0c, 0x00, 0x81, 0xe5, 0x10, 0x00, 0x91, 0xe5,
+ 0x02, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x0a, 0xff, 0x00, 0xa0, 0xe3, 0x0c, 0x00, 0x81, 0xe5,
+ 0x10, 0x00, 0x91, 0xe5, 0x02, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x0a, 0x08, 0x00, 0x91, 0xe5,
+ 0x10, 0x00, 0x91, 0xe5, 0x01, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x0a, 0x08, 0x00, 0x91, 0xe5,
+ 0xff, 0x00, 0x00, 0xe2, 0x1e, 0xff, 0x2f, 0xe1, 0x30, 0x40, 0x2d, 0xe9, 0x00, 0x50, 0xa0, 0xe1,
+ 0x03, 0x40, 0xa0, 0xe1, 0xa2, 0x02, 0xa0, 0xe1, 0x08, 0x00, 0x00, 0xe2, 0x03, 0x00, 0x80, 0xe2,
+ 0xd8, 0x10, 0x9f, 0xe5, 0x00, 0x00, 0xc1, 0xe5, 0x01, 0x20, 0xc1, 0xe5, 0xe2, 0xff, 0xff, 0xeb,
+ 0x01, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x1a, 0x14, 0x00, 0xa0, 0xe3, 0xc4, 0xff, 0xff, 0xeb,
+ 0x04, 0x20, 0xa0, 0xe1, 0x05, 0x10, 0xa0, 0xe1, 0x02, 0x00, 0xa0, 0xe3, 0x01, 0x00, 0x00, 0xeb,
+ 0x30, 0x40, 0xbd, 0xe8, 0x1e, 0xff, 0x2f, 0xe1, 0x70, 0x40, 0x2d, 0xe9, 0xf3, 0x46, 0xa0, 0xe3,
+ 0x00, 0x30, 0xa0, 0xe3, 0x00, 0x00, 0x50, 0xe3, 0x08, 0x00, 0x00, 0x9a, 0x8c, 0x50, 0x9f, 0xe5,
+ 0x03, 0x60, 0xd5, 0xe7, 0x0c, 0x60, 0x84, 0xe5, 0x10, 0x60, 0x94, 0xe5, 0x02, 0x00, 0x16, 0xe3,
+ 0xfc, 0xff, 0xff, 0x0a, 0x01, 0x30, 0x83, 0xe2, 0x00, 0x00, 0x53, 0xe1, 0xf7, 0xff, 0xff, 0x3a,
+ 0xff, 0x30, 0xa0, 0xe3, 0x0c, 0x30, 0x84, 0xe5, 0x08, 0x00, 0x94, 0xe5, 0x10, 0x00, 0x94, 0xe5,
+ 0x01, 0x00, 0x10, 0xe3, 0xfc, 0xff, 0xff, 0x0a, 0x08, 0x00, 0x94, 0xe5, 0x00, 0x00, 0xa0, 0xe3,
+ 0x00, 0x00, 0x52, 0xe3, 0x0b, 0x00, 0x00, 0x9a, 0x10, 0x50, 0x94, 0xe5, 0x02, 0x00, 0x15, 0xe3,
+ 0xfc, 0xff, 0xff, 0x0a, 0x0c, 0x30, 0x84, 0xe5, 0x10, 0x50, 0x94, 0xe5, 0x01, 0x00, 0x15, 0xe3,
+ 0xfc, 0xff, 0xff, 0x0a, 0x08, 0x50, 0x94, 0xe5, 0x01, 0x50, 0xc1, 0xe4, 0x01, 0x00, 0x80, 0xe2,
+ 0x02, 0x00, 0x50, 0xe1, 0xf3, 0xff, 0xff, 0x3a, 0xc8, 0x00, 0xa0, 0xe3, 0x98, 0xff, 0xff, 0xeb,
+ 0x70, 0x40, 0xbd, 0xe8, 0x1e, 0xff, 0x2f, 0xe1, 0x01, 0x0c, 0x00, 0x02, 0x01, 0x02, 0x00, 0x02,
+ 0x00, 0x01, 0x00, 0x02
+};
+
+struct atmel_private {
+ void *card; /* Bus dependent structure varies for PCcard */
+ int (*present_callback)(void *); /* And callback which uses it */
+ char firmware_id[32];
+ AtmelFWType firmware_type;
+ u8 *firmware;
+ int firmware_length;
+ struct timer_list management_timer;
+ struct net_device *dev;
+ struct device *sys_dev;
+ struct iw_statistics wstats;
+ spinlock_t irqlock, timerlock; /* spinlocks */
+ enum { BUS_TYPE_PCCARD, BUS_TYPE_PCI } bus_type;
+ enum {
+ CARD_TYPE_PARALLEL_FLASH,
+ CARD_TYPE_SPI_FLASH,
+ CARD_TYPE_EEPROM
+ } card_type;
+ int do_rx_crc; /* If we need to CRC incoming packets */
+ int probe_crc; /* set if we don't yet know */
+ int crc_ok_cnt, crc_ko_cnt; /* counters for probing */
+ u16 rx_desc_head;
+ u16 tx_desc_free, tx_desc_head, tx_desc_tail, tx_desc_previous;
+ u16 tx_free_mem, tx_buff_head, tx_buff_tail;
+
+ u16 frag_seq, frag_len, frag_no;
+ u8 frag_source[6];
+
+ u8 wep_is_on, default_key, exclude_unencrypted, encryption_level;
+ u8 group_cipher_suite, pairwise_cipher_suite;
+ u8 wep_keys[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE];
+ int wep_key_len[MAX_ENCRYPTION_KEYS];
+ int use_wpa, radio_on_broken; /* firmware dependent stuff. */
+
+ u16 host_info_base;
+ struct host_info_struct {
+ /* NB this is matched to the hardware, don't change. */
+ u8 volatile int_status;
+ u8 volatile int_mask;
+ u8 volatile lockout_host;
+ u8 volatile lockout_mac;
+
+ u16 tx_buff_pos;
+ u16 tx_buff_size;
+ u16 tx_desc_pos;
+ u16 tx_desc_count;
+
+ u16 rx_buff_pos;
+ u16 rx_buff_size;
+ u16 rx_desc_pos;
+ u16 rx_desc_count;
+
+ u16 build_version;
+ u16 command_pos;
+
+ u16 major_version;
+ u16 minor_version;
+
+ u16 func_ctrl;
+ u16 mac_status;
+ u16 generic_IRQ_type;
+ u8 reserved[2];
+ } host_info;
+
+ enum {
+ STATION_STATE_SCANNING,
+ STATION_STATE_JOINNING,
+ STATION_STATE_AUTHENTICATING,
+ STATION_STATE_ASSOCIATING,
+ STATION_STATE_READY,
+ STATION_STATE_REASSOCIATING,
+ STATION_STATE_DOWN,
+ STATION_STATE_MGMT_ERROR
+ } station_state;
+
+ int operating_mode, power_mode;
+ unsigned long last_qual;
+ int beacons_this_sec;
+ int channel;
+ int reg_domain, config_reg_domain;
+ int tx_rate;
+ int auto_tx_rate;
+ int rts_threshold;
+ int frag_threshold;
+ int long_retry, short_retry;
+ int preamble;
+ int default_beacon_period, beacon_period, listen_interval;
+ int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum;
+ int AuthenticationRequestRetryCnt, AssociationRequestRetryCnt, ReAssociationRequestRetryCnt;
+ enum {
+ SITE_SURVEY_IDLE,
+ SITE_SURVEY_IN_PROGRESS,
+ SITE_SURVEY_COMPLETED
+ } site_survey_state;
+ unsigned long last_survey;
+
+ int station_was_associated, station_is_associated;
+ int fast_scan;
+
+ struct bss_info {
+ int channel;
+ int SSIDsize;
+ int RSSI;
+ int UsingWEP;
+ int preamble;
+ int beacon_period;
+ int BSStype;
+ u8 BSSID[6];
+ u8 SSID[MAX_SSID_LENGTH];
+ } BSSinfo[MAX_BSS_ENTRIES];
+ int BSS_list_entries, current_BSS;
+ int connect_to_any_BSS;
+ int SSID_size, new_SSID_size;
+ u8 CurrentBSSID[6], BSSID[6];
+ u8 SSID[MAX_SSID_LENGTH], new_SSID[MAX_SSID_LENGTH];
+ u64 last_beacon_timestamp;
+ u8 rx_buf[MAX_WIRELESS_BODY];
+};
+
+static u8 atmel_basic_rates[4] = {0x82, 0x84, 0x0b, 0x16};
+
+static const struct {
+ int reg_domain;
+ int min, max;
+ char *name;
+} channel_table[] = { { REG_DOMAIN_FCC, 1, 11, "USA" },
+ { REG_DOMAIN_DOC, 1, 11, "Canada" },
+ { REG_DOMAIN_ETSI, 1, 13, "Europe" },
+ { REG_DOMAIN_SPAIN, 10, 11, "Spain" },
+ { REG_DOMAIN_FRANCE, 10, 13, "France" },
+ { REG_DOMAIN_MKK, 14, 14, "MKK" },
+ { REG_DOMAIN_MKK1, 1, 14, "MKK1" },
+ { REG_DOMAIN_ISRAEL, 3, 9, "Israel"} };
+
+static void build_wpa_mib(struct atmel_private *priv);
+static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void atmel_copy_to_card(struct net_device *dev, u16 dest,
+ const unsigned char *src, u16 len);
+static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest,
+ u16 src, u16 len);
+static void atmel_set_gcr(struct net_device *dev, u16 mask);
+static void atmel_clear_gcr(struct net_device *dev, u16 mask);
+static int atmel_lock_mac(struct atmel_private *priv);
+static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data);
+static void atmel_command_irq(struct atmel_private *priv);
+static int atmel_validate_channel(struct atmel_private *priv, int channel);
+static void atmel_management_frame(struct atmel_private *priv,
+ struct ieee80211_hdr *header,
+ u16 frame_len, u8 rssi);
+static void atmel_management_timer(struct timer_list *t);
+static void atmel_send_command(struct atmel_private *priv, int command,
+ void *cmd, int cmd_size);
+static int atmel_send_command_wait(struct atmel_private *priv, int command,
+ void *cmd, int cmd_size);
+static void atmel_transmit_management_frame(struct atmel_private *priv,
+ struct ieee80211_hdr *header,
+ u8 *body, int body_len);
+
+static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index);
+static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index,
+ u8 data);
+static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index,
+ u16 data);
+static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index,
+ const u8 *data, int data_len);
+static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index,
+ u8 *data, int data_len);
+static void atmel_scan(struct atmel_private *priv, int specific_ssid);
+static void atmel_join_bss(struct atmel_private *priv, int bss_index);
+static void atmel_smooth_qual(struct atmel_private *priv);
+static void atmel_writeAR(struct net_device *dev, u16 data);
+static int probe_atmel_card(struct net_device *dev);
+static int reset_atmel_card(struct net_device *dev);
+static void atmel_enter_state(struct atmel_private *priv, int new_state);
+int atmel_open (struct net_device *dev);
+
+static inline u16 atmel_hi(struct atmel_private *priv, u16 offset)
+{
+ return priv->host_info_base + offset;
+}
+
+static inline u16 atmel_co(struct atmel_private *priv, u16 offset)
+{
+ return priv->host_info.command_pos + offset;
+}
+
+static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc)
+{
+ return priv->host_info.rx_desc_pos + (sizeof(struct rx_desc) * desc) + offset;
+}
+
+static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc)
+{
+ return priv->host_info.tx_desc_pos + (sizeof(struct tx_desc) * desc) + offset;
+}
+
+static inline u8 atmel_read8(struct net_device *dev, u16 offset)
+{
+ return inb(dev->base_addr + offset);
+}
+
+static inline void atmel_write8(struct net_device *dev, u16 offset, u8 data)
+{
+ outb(data, dev->base_addr + offset);
+}
+
+static inline u16 atmel_read16(struct net_device *dev, u16 offset)
+{
+ return inw(dev->base_addr + offset);
+}
+
+static inline void atmel_write16(struct net_device *dev, u16 offset, u16 data)
+{
+ outw(data, dev->base_addr + offset);
+}
+
+static inline u8 atmel_rmem8(struct atmel_private *priv, u16 pos)
+{
+ atmel_writeAR(priv->dev, pos);
+ return atmel_read8(priv->dev, DR);
+}
+
+static inline void atmel_wmem8(struct atmel_private *priv, u16 pos, u16 data)
+{
+ atmel_writeAR(priv->dev, pos);
+ atmel_write8(priv->dev, DR, data);
+}
+
+static inline u16 atmel_rmem16(struct atmel_private *priv, u16 pos)
+{
+ atmel_writeAR(priv->dev, pos);
+ return atmel_read16(priv->dev, DR);
+}
+
+static inline void atmel_wmem16(struct atmel_private *priv, u16 pos, u16 data)
+{
+ atmel_writeAR(priv->dev, pos);
+ atmel_write16(priv->dev, DR, data);
+}
+
+static const struct iw_handler_def atmel_handler_def;
+
+static void tx_done_irq(struct atmel_private *priv)
+{
+ int i;
+
+ for (i = 0;
+ atmel_rmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head)) == TX_DONE &&
+ i < priv->host_info.tx_desc_count;
+ i++) {
+ u8 status = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_STATUS_OFFSET, priv->tx_desc_head));
+ u16 msdu_size = atmel_rmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_head));
+ u8 type = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_head));
+
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head), 0);
+
+ priv->tx_free_mem += msdu_size;
+ priv->tx_desc_free++;
+
+ if (priv->tx_buff_head + msdu_size > (priv->host_info.tx_buff_pos + priv->host_info.tx_buff_size))
+ priv->tx_buff_head = 0;
+ else
+ priv->tx_buff_head += msdu_size;
+
+ if (priv->tx_desc_head < (priv->host_info.tx_desc_count - 1))
+ priv->tx_desc_head++ ;
+ else
+ priv->tx_desc_head = 0;
+
+ if (type == TX_PACKET_TYPE_DATA) {
+ if (status == TX_STATUS_SUCCESS)
+ priv->dev->stats.tx_packets++;
+ else
+ priv->dev->stats.tx_errors++;
+ netif_wake_queue(priv->dev);
+ }
+ }
+}
+
+static u16 find_tx_buff(struct atmel_private *priv, u16 len)
+{
+ u16 bottom_free = priv->host_info.tx_buff_size - priv->tx_buff_tail;
+
+ if (priv->tx_desc_free == 3 || priv->tx_free_mem < len)
+ return 0;
+
+ if (bottom_free >= len)
+ return priv->host_info.tx_buff_pos + priv->tx_buff_tail;
+
+ if (priv->tx_free_mem - bottom_free >= len) {
+ priv->tx_buff_tail = 0;
+ return priv->host_info.tx_buff_pos;
+ }
+
+ return 0;
+}
+
+static void tx_update_descriptor(struct atmel_private *priv, int is_bcast,
+ u16 len, u16 buff, u8 type)
+{
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, priv->tx_desc_tail), buff);
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_tail), len);
+ if (!priv->use_wpa)
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_HOST_LENGTH_OFFSET, priv->tx_desc_tail), len);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_tail), type);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_RATE_OFFSET, priv->tx_desc_tail), priv->tx_rate);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_RETRY_OFFSET, priv->tx_desc_tail), 0);
+ if (priv->use_wpa) {
+ int cipher_type, cipher_length;
+ if (is_bcast) {
+ cipher_type = priv->group_cipher_suite;
+ if (cipher_type == CIPHER_SUITE_WEP_64 ||
+ cipher_type == CIPHER_SUITE_WEP_128)
+ cipher_length = 8;
+ else if (cipher_type == CIPHER_SUITE_TKIP)
+ cipher_length = 12;
+ else if (priv->pairwise_cipher_suite == CIPHER_SUITE_WEP_64 ||
+ priv->pairwise_cipher_suite == CIPHER_SUITE_WEP_128) {
+ cipher_type = priv->pairwise_cipher_suite;
+ cipher_length = 8;
+ } else {
+ cipher_type = CIPHER_SUITE_NONE;
+ cipher_length = 0;
+ }
+ } else {
+ cipher_type = priv->pairwise_cipher_suite;
+ if (cipher_type == CIPHER_SUITE_WEP_64 ||
+ cipher_type == CIPHER_SUITE_WEP_128)
+ cipher_length = 8;
+ else if (cipher_type == CIPHER_SUITE_TKIP)
+ cipher_length = 12;
+ else if (priv->group_cipher_suite == CIPHER_SUITE_WEP_64 ||
+ priv->group_cipher_suite == CIPHER_SUITE_WEP_128) {
+ cipher_type = priv->group_cipher_suite;
+ cipher_length = 8;
+ } else {
+ cipher_type = CIPHER_SUITE_NONE;
+ cipher_length = 0;
+ }
+ }
+
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_TYPE_OFFSET, priv->tx_desc_tail),
+ cipher_type);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_LENGTH_OFFSET, priv->tx_desc_tail),
+ cipher_length);
+ }
+ atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_tail), 0x80000000L);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_tail), TX_FIRM_OWN);
+ if (priv->tx_desc_previous != priv->tx_desc_tail)
+ atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_previous), 0);
+ priv->tx_desc_previous = priv->tx_desc_tail;
+ if (priv->tx_desc_tail < (priv->host_info.tx_desc_count - 1))
+ priv->tx_desc_tail++;
+ else
+ priv->tx_desc_tail = 0;
+ priv->tx_desc_free--;
+ priv->tx_free_mem -= len;
+}
+
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct ieee80211_hdr header;
+ unsigned long flags;
+ u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
+
+ if (priv->card && priv->present_callback &&
+ !(*priv->present_callback)(priv->card)) {
+ dev->stats.tx_errors++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (priv->station_state != STATION_STATE_READY) {
+ dev->stats.tx_errors++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ /* first ensure the timer func cannot run */
+ spin_lock_bh(&priv->timerlock);
+ /* then stop the hardware ISR */
+ spin_lock_irqsave(&priv->irqlock, flags);
+ /* nb doing the above in the opposite order will deadlock */
+
+ /* The Wireless Header is 30 bytes. In the Ethernet packet we "cut" the
+ 12 first bytes (containing DA/SA) and put them in the appropriate
+ fields of the Wireless Header. Thus the packet length is then the
+ initial + 18 (+30-12) */
+
+ if (!(buff = find_tx_buff(priv, len + 18))) {
+ dev->stats.tx_dropped++;
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+ spin_unlock_bh(&priv->timerlock);
+ netif_stop_queue(dev);
+ return NETDEV_TX_BUSY;
+ }
+
+ frame_ctl = IEEE80211_FTYPE_DATA;
+ header.duration_id = 0;
+ header.seq_ctrl = 0;
+ if (priv->wep_is_on)
+ frame_ctl |= IEEE80211_FCTL_PROTECTED;
+ if (priv->operating_mode == IW_MODE_ADHOC) {
+ skb_copy_from_linear_data(skb, &header.addr1, ETH_ALEN);
+ memcpy(&header.addr2, dev->dev_addr, ETH_ALEN);
+ memcpy(&header.addr3, priv->BSSID, ETH_ALEN);
+ } else {
+ frame_ctl |= IEEE80211_FCTL_TODS;
+ memcpy(&header.addr1, priv->CurrentBSSID, ETH_ALEN);
+ memcpy(&header.addr2, dev->dev_addr, ETH_ALEN);
+ skb_copy_from_linear_data(skb, &header.addr3, ETH_ALEN);
+ }
+
+ if (priv->use_wpa)
+ memcpy(&header.addr4, rfc1042_header, ETH_ALEN);
+
+ header.frame_control = cpu_to_le16(frame_ctl);
+ /* Copy the wireless header into the card */
+ atmel_copy_to_card(dev, buff, (unsigned char *)&header, DATA_FRAME_WS_HEADER_SIZE);
+ /* Copy the packet sans its 802.3 header addresses which have been replaced */
+ atmel_copy_to_card(dev, buff + DATA_FRAME_WS_HEADER_SIZE, skb->data + 12, len - 12);
+ priv->tx_buff_tail += len - 12 + DATA_FRAME_WS_HEADER_SIZE;
+
+ /* low bit of first byte of destination tells us if broadcast */
+ tx_update_descriptor(priv, *(skb->data) & 0x01, len + 18, buff, TX_PACKET_TYPE_DATA);
+ dev->stats.tx_bytes += len;
+
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+ spin_unlock_bh(&priv->timerlock);
+ dev_kfree_skb(skb);
+
+ return NETDEV_TX_OK;
+}
+
+static void atmel_transmit_management_frame(struct atmel_private *priv,
+ struct ieee80211_hdr *header,
+ u8 *body, int body_len)
+{
+ u16 buff;
+ int len = MGMT_FRAME_BODY_OFFSET + body_len;
+
+ if (!(buff = find_tx_buff(priv, len)))
+ return;
+
+ atmel_copy_to_card(priv->dev, buff, (u8 *)header, MGMT_FRAME_BODY_OFFSET);
+ atmel_copy_to_card(priv->dev, buff + MGMT_FRAME_BODY_OFFSET, body, body_len);
+ priv->tx_buff_tail += len;
+ tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT);
+}
+
+static void fast_rx_path(struct atmel_private *priv,
+ struct ieee80211_hdr *header,
+ u16 msdu_size, u16 rx_packet_loc, u32 crc)
+{
+ /* fast path: unfragmented packet copy directly into skbuf */
+ u8 mac4[6];
+ struct sk_buff *skb;
+ unsigned char *skbp;
+
+ /* get the final, mac 4 header field, this tells us encapsulation */
+ atmel_copy_to_host(priv->dev, mac4, rx_packet_loc + 24, 6);
+ msdu_size -= 6;
+
+ if (priv->do_rx_crc) {
+ crc = crc32_le(crc, mac4, 6);
+ msdu_size -= 4;
+ }
+
+ if (!(skb = dev_alloc_skb(msdu_size + 14))) {
+ priv->dev->stats.rx_dropped++;
+ return;
+ }
+
+ skb_reserve(skb, 2);
+ skbp = skb_put(skb, msdu_size + 12);
+ atmel_copy_to_host(priv->dev, skbp + 12, rx_packet_loc + 30, msdu_size);
+
+ if (priv->do_rx_crc) {
+ u32 netcrc;
+ crc = crc32_le(crc, skbp + 12, msdu_size);
+ atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + 30 + msdu_size, 4);
+ if ((crc ^ 0xffffffff) != netcrc) {
+ priv->dev->stats.rx_crc_errors++;
+ dev_kfree_skb(skb);
+ return;
+ }
+ }
+
+ memcpy(skbp, header->addr1, ETH_ALEN); /* destination address */
+ if (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FROMDS)
+ memcpy(&skbp[ETH_ALEN], header->addr3, ETH_ALEN);
+ else
+ memcpy(&skbp[ETH_ALEN], header->addr2, ETH_ALEN); /* source address */
+
+ skb->protocol = eth_type_trans(skb, priv->dev);
+ skb->ip_summed = CHECKSUM_NONE;
+ netif_rx(skb);
+ priv->dev->stats.rx_bytes += 12 + msdu_size;
+ priv->dev->stats.rx_packets++;
+}
+
+/* Test to see if the packet in card memory at packet_loc has a valid CRC
+ It doesn't matter that this is slow: it is only used to proble the first few
+ packets. */
+static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size)
+{
+ int i = msdu_size - 4;
+ u32 netcrc, crc = 0xffffffff;
+
+ if (msdu_size < 4)
+ return 0;
+
+ atmel_copy_to_host(priv->dev, (void *)&netcrc, packet_loc + i, 4);
+
+ atmel_writeAR(priv->dev, packet_loc);
+ while (i--) {
+ u8 octet = atmel_read8(priv->dev, DR);
+ crc = crc32_le(crc, &octet, 1);
+ }
+
+ return (crc ^ 0xffffffff) == netcrc;
+}
+
+static void frag_rx_path(struct atmel_private *priv,
+ struct ieee80211_hdr *header,
+ u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no,
+ u8 frag_no, int more_frags)
+{
+ u8 mac4[ETH_ALEN];
+ u8 source[ETH_ALEN];
+ struct sk_buff *skb;
+
+ if (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FROMDS)
+ memcpy(source, header->addr3, ETH_ALEN);
+ else
+ memcpy(source, header->addr2, ETH_ALEN);
+
+ rx_packet_loc += 24; /* skip header */
+
+ if (priv->do_rx_crc)
+ msdu_size -= 4;
+
+ if (frag_no == 0) { /* first fragment */
+ atmel_copy_to_host(priv->dev, mac4, rx_packet_loc, ETH_ALEN);
+ msdu_size -= ETH_ALEN;
+ rx_packet_loc += ETH_ALEN;
+
+ if (priv->do_rx_crc)
+ crc = crc32_le(crc, mac4, 6);
+
+ priv->frag_seq = seq_no;
+ priv->frag_no = 1;
+ priv->frag_len = msdu_size;
+ memcpy(priv->frag_source, source, ETH_ALEN);
+ memcpy(&priv->rx_buf[ETH_ALEN], source, ETH_ALEN);
+ memcpy(priv->rx_buf, header->addr1, ETH_ALEN);
+
+ atmel_copy_to_host(priv->dev, &priv->rx_buf[12], rx_packet_loc, msdu_size);
+
+ if (priv->do_rx_crc) {
+ u32 netcrc;
+ crc = crc32_le(crc, &priv->rx_buf[12], msdu_size);
+ atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4);
+ if ((crc ^ 0xffffffff) != netcrc) {
+ priv->dev->stats.rx_crc_errors++;
+ eth_broadcast_addr(priv->frag_source);
+ }
+ }
+
+ } else if (priv->frag_no == frag_no &&
+ priv->frag_seq == seq_no &&
+ memcmp(priv->frag_source, source, ETH_ALEN) == 0) {
+
+ atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len],
+ rx_packet_loc, msdu_size);
+ if (priv->do_rx_crc) {
+ u32 netcrc;
+ crc = crc32_le(crc,
+ &priv->rx_buf[12 + priv->frag_len],
+ msdu_size);
+ atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4);
+ if ((crc ^ 0xffffffff) != netcrc) {
+ priv->dev->stats.rx_crc_errors++;
+ eth_broadcast_addr(priv->frag_source);
+ more_frags = 1; /* don't send broken assembly */
+ }
+ }
+
+ priv->frag_len += msdu_size;
+ priv->frag_no++;
+
+ if (!more_frags) { /* last one */
+ eth_broadcast_addr(priv->frag_source);
+ if (!(skb = dev_alloc_skb(priv->frag_len + 14))) {
+ priv->dev->stats.rx_dropped++;
+ } else {
+ skb_reserve(skb, 2);
+ skb_put_data(skb, priv->rx_buf,
+ priv->frag_len + 12);
+ skb->protocol = eth_type_trans(skb, priv->dev);
+ skb->ip_summed = CHECKSUM_NONE;
+ netif_rx(skb);
+ priv->dev->stats.rx_bytes += priv->frag_len + 12;
+ priv->dev->stats.rx_packets++;
+ }
+ }
+ } else
+ priv->wstats.discard.fragment++;
+}
+
+static void rx_done_irq(struct atmel_private *priv)
+{
+ int i;
+ struct ieee80211_hdr header;
+
+ for (i = 0;
+ atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID &&
+ i < priv->host_info.rx_desc_count;
+ i++) {
+
+ u16 msdu_size, rx_packet_loc, frame_ctl, seq_control;
+ u8 status = atmel_rmem8(priv, atmel_rx(priv, RX_DESC_STATUS_OFFSET, priv->rx_desc_head));
+ u32 crc = 0xffffffff;
+
+ if (status != RX_STATUS_SUCCESS) {
+ if (status == 0xc1) /* determined by experiment */
+ priv->wstats.discard.nwid++;
+ else
+ priv->dev->stats.rx_errors++;
+ goto next;
+ }
+
+ msdu_size = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_SIZE_OFFSET, priv->rx_desc_head));
+ rx_packet_loc = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_POS_OFFSET, priv->rx_desc_head));
+
+ if (msdu_size < 30) {
+ priv->dev->stats.rx_errors++;
+ goto next;
+ }
+
+ /* Get header as far as end of seq_ctrl */
+ atmel_copy_to_host(priv->dev, (char *)&header, rx_packet_loc, 24);
+ frame_ctl = le16_to_cpu(header.frame_control);
+ seq_control = le16_to_cpu(header.seq_ctrl);
+
+ /* probe for CRC use here if needed once five packets have
+ arrived with the same crc status, we assume we know what's
+ happening and stop probing */
+ if (priv->probe_crc) {
+ if (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED)) {
+ priv->do_rx_crc = probe_crc(priv, rx_packet_loc, msdu_size);
+ } else {
+ priv->do_rx_crc = probe_crc(priv, rx_packet_loc + 24, msdu_size - 24);
+ }
+ if (priv->do_rx_crc) {
+ if (priv->crc_ok_cnt++ > 5)
+ priv->probe_crc = 0;
+ } else {
+ if (priv->crc_ko_cnt++ > 5)
+ priv->probe_crc = 0;
+ }
+ }
+
+ /* don't CRC header when WEP in use */
+ if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED))) {
+ crc = crc32_le(0xffffffff, (unsigned char *)&header, 24);
+ }
+ msdu_size -= 24; /* header */
+
+ if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) {
+ int more_fragments = frame_ctl & IEEE80211_FCTL_MOREFRAGS;
+ u8 packet_fragment_no = seq_control & IEEE80211_SCTL_FRAG;
+ u16 packet_sequence_no = (seq_control & IEEE80211_SCTL_SEQ) >> 4;
+
+ if (!more_fragments && packet_fragment_no == 0) {
+ fast_rx_path(priv, &header, msdu_size, rx_packet_loc, crc);
+ } else {
+ frag_rx_path(priv, &header, msdu_size, rx_packet_loc, crc,
+ packet_sequence_no, packet_fragment_no, more_fragments);
+ }
+ }
+
+ if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
+ /* copy rest of packet into buffer */
+ atmel_copy_to_host(priv->dev, (unsigned char *)&priv->rx_buf, rx_packet_loc + 24, msdu_size);
+
+ /* we use the same buffer for frag reassembly and control packets */
+ eth_broadcast_addr(priv->frag_source);
+
+ if (priv->do_rx_crc) {
+ /* last 4 octets is crc */
+ msdu_size -= 4;
+ crc = crc32_le(crc, (unsigned char *)&priv->rx_buf, msdu_size);
+ if ((crc ^ 0xffffffff) != (*((u32 *)&priv->rx_buf[msdu_size]))) {
+ priv->dev->stats.rx_crc_errors++;
+ goto next;
+ }
+ }
+
+ atmel_management_frame(priv, &header, msdu_size,
+ atmel_rmem8(priv, atmel_rx(priv, RX_DESC_RSSI_OFFSET, priv->rx_desc_head)));
+ }
+
+next:
+ /* release descriptor */
+ atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED);
+
+ if (priv->rx_desc_head < (priv->host_info.rx_desc_count - 1))
+ priv->rx_desc_head++;
+ else
+ priv->rx_desc_head = 0;
+ }
+}
+
+static irqreturn_t service_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct atmel_private *priv = netdev_priv(dev);
+ u8 isr;
+ int i = -1;
+ static const u8 irq_order[] = {
+ ISR_OUT_OF_RANGE,
+ ISR_RxCOMPLETE,
+ ISR_TxCOMPLETE,
+ ISR_RxFRAMELOST,
+ ISR_FATAL_ERROR,
+ ISR_COMMAND_COMPLETE,
+ ISR_IBSS_MERGE,
+ ISR_GENERIC_IRQ
+ };
+
+ if (priv->card && priv->present_callback &&
+ !(*priv->present_callback)(priv->card))
+ return IRQ_HANDLED;
+
+ /* In this state upper-level code assumes it can mess with
+ the card unhampered by interrupts which may change register state.
+ Note that even though the card shouldn't generate interrupts
+ the inturrupt line may be shared. This allows card setup
+ to go on without disabling interrupts for a long time. */
+ if (priv->station_state == STATION_STATE_DOWN)
+ return IRQ_NONE;
+
+ atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */
+
+ while (1) {
+ if (!atmel_lock_mac(priv)) {
+ /* failed to contact card */
+ printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
+ return IRQ_HANDLED;
+ }
+
+ isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
+
+ if (!isr) {
+ atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */
+ return i == -1 ? IRQ_NONE : IRQ_HANDLED;
+ }
+
+ atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */
+
+ for (i = 0; i < ARRAY_SIZE(irq_order); i++)
+ if (isr & irq_order[i])
+ break;
+
+ if (!atmel_lock_mac(priv)) {
+ /* failed to contact card */
+ printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
+ return IRQ_HANDLED;
+ }
+
+ isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
+ isr ^= irq_order[i];
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET), isr);
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
+
+ switch (irq_order[i]) {
+
+ case ISR_OUT_OF_RANGE:
+ if (priv->operating_mode == IW_MODE_INFRA &&
+ priv->station_state == STATION_STATE_READY) {
+ priv->station_is_associated = 0;
+ atmel_scan(priv, 1);
+ }
+ break;
+
+ case ISR_RxFRAMELOST:
+ priv->wstats.discard.misc++;
+ fallthrough;
+ case ISR_RxCOMPLETE:
+ rx_done_irq(priv);
+ break;
+
+ case ISR_TxCOMPLETE:
+ tx_done_irq(priv);
+ break;
+
+ case ISR_FATAL_ERROR:
+ printk(KERN_ALERT "%s: *** FATAL error interrupt ***\n", dev->name);
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ break;
+
+ case ISR_COMMAND_COMPLETE:
+ atmel_command_irq(priv);
+ break;
+
+ case ISR_IBSS_MERGE:
+ atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
+ priv->CurrentBSSID, 6);
+ /* The WPA stuff cares about the current AP address */
+ if (priv->use_wpa)
+ build_wpa_mib(priv);
+ break;
+ case ISR_GENERIC_IRQ:
+ printk(KERN_INFO "%s: Generic_irq received.\n", dev->name);
+ break;
+ }
+ }
+}
+
+static struct iw_statistics *atmel_get_wireless_stats(struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* update the link quality here in case we are seeing no beacons
+ at all to drive the process */
+ atmel_smooth_qual(priv);
+
+ priv->wstats.status = priv->station_state;
+
+ if (priv->operating_mode == IW_MODE_INFRA) {
+ if (priv->station_state != STATION_STATE_READY) {
+ priv->wstats.qual.qual = 0;
+ priv->wstats.qual.level = 0;
+ priv->wstats.qual.updated = (IW_QUAL_QUAL_INVALID
+ | IW_QUAL_LEVEL_INVALID);
+ }
+ priv->wstats.qual.noise = 0;
+ priv->wstats.qual.updated |= IW_QUAL_NOISE_INVALID;
+ } else {
+ /* Quality levels cannot be determined in ad-hoc mode,
+ because we can 'hear' more that one remote station. */
+ priv->wstats.qual.qual = 0;
+ priv->wstats.qual.level = 0;
+ priv->wstats.qual.noise = 0;
+ priv->wstats.qual.updated = IW_QUAL_QUAL_INVALID
+ | IW_QUAL_LEVEL_INVALID
+ | IW_QUAL_NOISE_INVALID;
+ priv->wstats.miss.beacon = 0;
+ }
+
+ return &priv->wstats;
+}
+
+static int atmel_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ eth_hw_addr_set(dev, addr->sa_data);
+ return atmel_open(dev);
+}
+
+EXPORT_SYMBOL(atmel_open);
+
+int atmel_open(struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ int i, channel, err;
+
+ /* any scheduled timer is no longer needed and might screw things up.. */
+ del_timer_sync(&priv->management_timer);
+
+ /* Interrupts will not touch the card once in this state... */
+ priv->station_state = STATION_STATE_DOWN;
+
+ if (priv->new_SSID_size) {
+ memcpy(priv->SSID, priv->new_SSID, priv->new_SSID_size);
+ priv->SSID_size = priv->new_SSID_size;
+ priv->new_SSID_size = 0;
+ }
+ priv->BSS_list_entries = 0;
+
+ priv->AuthenticationRequestRetryCnt = 0;
+ priv->AssociationRequestRetryCnt = 0;
+ priv->ReAssociationRequestRetryCnt = 0;
+ priv->CurrentAuthentTransactionSeqNum = 0x0001;
+ priv->ExpectedAuthentTransactionSeqNum = 0x0002;
+
+ priv->site_survey_state = SITE_SURVEY_IDLE;
+ priv->station_is_associated = 0;
+
+ err = reset_atmel_card(dev);
+ if (err)
+ return err;
+
+ if (priv->config_reg_domain) {
+ priv->reg_domain = priv->config_reg_domain;
+ atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS, priv->reg_domain);
+ } else {
+ priv->reg_domain = atmel_get_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS);
+ for (i = 0; i < ARRAY_SIZE(channel_table); i++)
+ if (priv->reg_domain == channel_table[i].reg_domain)
+ break;
+ if (i == ARRAY_SIZE(channel_table)) {
+ priv->reg_domain = REG_DOMAIN_MKK1;
+ printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name);
+ }
+ }
+
+ if ((channel = atmel_validate_channel(priv, priv->channel)))
+ priv->channel = channel;
+
+ /* this moves station_state on.... */
+ atmel_scan(priv, 1);
+
+ atmel_set_gcr(priv->dev, GCR_ENINT); /* enable interrupts */
+ return 0;
+}
+
+static int atmel_close(struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* Send event to userspace that we are disassociating */
+ if (priv->station_state == STATION_STATE_READY) {
+ union iwreq_data wrqu;
+
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ eth_zero_addr(wrqu.ap_addr.sa_data);
+ wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+ }
+
+ atmel_enter_state(priv, STATION_STATE_DOWN);
+
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+ atmel_write16(dev, GCR, 0x0040);
+ return 0;
+}
+
+static int atmel_validate_channel(struct atmel_private *priv, int channel)
+{
+ /* check that channel is OK, if so return zero,
+ else return suitable default channel */
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(channel_table); i++)
+ if (priv->reg_domain == channel_table[i].reg_domain) {
+ if (channel >= channel_table[i].min &&
+ channel <= channel_table[i].max)
+ return 0;
+ else
+ return channel_table[i].min;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PROC_FS
+static int atmel_proc_show(struct seq_file *m, void *v)
+{
+ struct atmel_private *priv = m->private;
+ int i;
+ char *s, *r, *c;
+
+ seq_printf(m, "Driver version:\t\t%d.%d\n", DRIVER_MAJOR, DRIVER_MINOR);
+
+ if (priv->station_state != STATION_STATE_DOWN) {
+ seq_printf(m,
+ "Firmware version:\t%d.%d build %d\n"
+ "Firmware location:\t",
+ priv->host_info.major_version,
+ priv->host_info.minor_version,
+ priv->host_info.build_version);
+
+ if (priv->card_type != CARD_TYPE_EEPROM)
+ seq_puts(m, "on card\n");
+ else if (priv->firmware)
+ seq_printf(m, "%s loaded by host\n", priv->firmware_id);
+ else
+ seq_printf(m, "%s loaded by hotplug\n", priv->firmware_id);
+
+ switch (priv->card_type) {
+ case CARD_TYPE_PARALLEL_FLASH:
+ c = "Parallel flash";
+ break;
+ case CARD_TYPE_SPI_FLASH:
+ c = "SPI flash\n";
+ break;
+ case CARD_TYPE_EEPROM:
+ c = "EEPROM";
+ break;
+ default:
+ c = "<unknown>";
+ }
+
+ r = "<unknown>";
+ for (i = 0; i < ARRAY_SIZE(channel_table); i++)
+ if (priv->reg_domain == channel_table[i].reg_domain)
+ r = channel_table[i].name;
+
+ seq_printf(m, "MAC memory type:\t%s\n", c);
+ seq_printf(m, "Regulatory domain:\t%s\n", r);
+ seq_printf(m, "Host CRC checking:\t%s\n",
+ priv->do_rx_crc ? "On" : "Off");
+ seq_printf(m, "WPA-capable firmware:\t%s\n",
+ priv->use_wpa ? "Yes" : "No");
+ }
+
+ switch (priv->station_state) {
+ case STATION_STATE_SCANNING:
+ s = "Scanning";
+ break;
+ case STATION_STATE_JOINNING:
+ s = "Joining";
+ break;
+ case STATION_STATE_AUTHENTICATING:
+ s = "Authenticating";
+ break;
+ case STATION_STATE_ASSOCIATING:
+ s = "Associating";
+ break;
+ case STATION_STATE_READY:
+ s = "Ready";
+ break;
+ case STATION_STATE_REASSOCIATING:
+ s = "Reassociating";
+ break;
+ case STATION_STATE_MGMT_ERROR:
+ s = "Management error";
+ break;
+ case STATION_STATE_DOWN:
+ s = "Down";
+ break;
+ default:
+ s = "<unknown>";
+ }
+
+ seq_printf(m, "Current state:\t\t%s\n", s);
+ return 0;
+}
+#endif
+
+static const struct net_device_ops atmel_netdev_ops = {
+ .ndo_open = atmel_open,
+ .ndo_stop = atmel_close,
+ .ndo_set_mac_address = atmel_set_mac_address,
+ .ndo_start_xmit = start_tx,
+ .ndo_do_ioctl = atmel_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+struct net_device *init_atmel_card(unsigned short irq, unsigned long port,
+ const AtmelFWType fw_type,
+ struct device *sys_dev,
+ int (*card_present)(void *), void *card)
+{
+ struct net_device *dev;
+ struct atmel_private *priv;
+ int rc;
+
+ /* Create the network device object. */
+ dev = alloc_etherdev(sizeof(*priv));
+ if (!dev)
+ return NULL;
+
+ if (dev_alloc_name(dev, dev->name) < 0) {
+ printk(KERN_ERR "atmel: Couldn't get name!\n");
+ goto err_out_free;
+ }
+
+ priv = netdev_priv(dev);
+ priv->dev = dev;
+ priv->sys_dev = sys_dev;
+ priv->present_callback = card_present;
+ priv->card = card;
+ priv->firmware = NULL;
+ priv->firmware_type = fw_type;
+ if (firmware) /* module parameter */
+ strscpy(priv->firmware_id, firmware, sizeof(priv->firmware_id));
+ priv->bus_type = card_present ? BUS_TYPE_PCCARD : BUS_TYPE_PCI;
+ priv->station_state = STATION_STATE_DOWN;
+ priv->do_rx_crc = 0;
+ /* For PCMCIA cards, some chips need CRC, some don't
+ so we have to probe. */
+ if (priv->bus_type == BUS_TYPE_PCCARD) {
+ priv->probe_crc = 1;
+ priv->crc_ok_cnt = priv->crc_ko_cnt = 0;
+ } else
+ priv->probe_crc = 0;
+ priv->last_qual = jiffies;
+ priv->last_beacon_timestamp = 0;
+ memset(priv->frag_source, 0xff, sizeof(priv->frag_source));
+ eth_zero_addr(priv->BSSID);
+ priv->CurrentBSSID[0] = 0xFF; /* Initialize to something invalid.... */
+ priv->station_was_associated = 0;
+
+ priv->last_survey = jiffies;
+ priv->preamble = LONG_PREAMBLE;
+ priv->operating_mode = IW_MODE_INFRA;
+ priv->connect_to_any_BSS = 0;
+ priv->config_reg_domain = 0;
+ priv->reg_domain = 0;
+ priv->tx_rate = 3;
+ priv->auto_tx_rate = 1;
+ priv->channel = 4;
+ priv->power_mode = 0;
+ priv->SSID[0] = '\0';
+ priv->SSID_size = 0;
+ priv->new_SSID_size = 0;
+ priv->frag_threshold = 2346;
+ priv->rts_threshold = 2347;
+ priv->short_retry = 7;
+ priv->long_retry = 4;
+
+ priv->wep_is_on = 0;
+ priv->default_key = 0;
+ priv->encryption_level = 0;
+ priv->exclude_unencrypted = 0;
+ priv->group_cipher_suite = priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+ priv->use_wpa = 0;
+ memset(priv->wep_keys, 0, sizeof(priv->wep_keys));
+ memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len));
+
+ priv->default_beacon_period = priv->beacon_period = 100;
+ priv->listen_interval = 1;
+
+ timer_setup(&priv->management_timer, atmel_management_timer, 0);
+ spin_lock_init(&priv->irqlock);
+ spin_lock_init(&priv->timerlock);
+
+ dev->netdev_ops = &atmel_netdev_ops;
+ dev->wireless_handlers = &atmel_handler_def;
+ dev->irq = irq;
+ dev->base_addr = port;
+
+ /* MTU range: 68 - 2312 */
+ dev->min_mtu = 68;
+ dev->max_mtu = MAX_WIRELESS_BODY - ETH_FCS_LEN;
+
+ SET_NETDEV_DEV(dev, sys_dev);
+
+ if ((rc = request_irq(dev->irq, service_interrupt, IRQF_SHARED, dev->name, dev))) {
+ printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc);
+ goto err_out_free;
+ }
+
+ if (!request_region(dev->base_addr, 32,
+ priv->bus_type == BUS_TYPE_PCCARD ? "atmel_cs" : "atmel_pci")) {
+ goto err_out_irq;
+ }
+
+ if (register_netdev(dev))
+ goto err_out_res;
+
+ if (!probe_atmel_card(dev)) {
+ unregister_netdev(dev);
+ goto err_out_res;
+ }
+
+ netif_carrier_off(dev);
+
+ if (!proc_create_single_data("driver/atmel", 0, NULL, atmel_proc_show,
+ priv))
+ printk(KERN_WARNING "atmel: unable to create /proc entry.\n");
+
+ printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %pM\n",
+ dev->name, DRIVER_MAJOR, DRIVER_MINOR, dev->dev_addr);
+
+ return dev;
+
+err_out_res:
+ release_region(dev->base_addr, 32);
+err_out_irq:
+ free_irq(dev->irq, dev);
+err_out_free:
+ free_netdev(dev);
+ return NULL;
+}
+
+EXPORT_SYMBOL(init_atmel_card);
+
+void stop_atmel_card(struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* put a brick on it... */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+ atmel_write16(dev, GCR, 0x0040);
+
+ del_timer_sync(&priv->management_timer);
+ unregister_netdev(dev);
+ remove_proc_entry("driver/atmel", NULL);
+ free_irq(dev->irq, dev);
+ kfree(priv->firmware);
+ release_region(dev->base_addr, 32);
+ free_netdev(dev);
+}
+
+EXPORT_SYMBOL(stop_atmel_card);
+
+static int atmel_set_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_point *dwrq = &wrqu->essid;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* Check if we asked for `any' */
+ if (dwrq->flags == 0) {
+ priv->connect_to_any_BSS = 1;
+ } else {
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+
+ priv->connect_to_any_BSS = 0;
+
+ /* Check the size of the string */
+ if (dwrq->length > MAX_SSID_LENGTH)
+ return -E2BIG;
+ if (index != 0)
+ return -EINVAL;
+
+ memcpy(priv->new_SSID, extra, dwrq->length);
+ priv->new_SSID_size = dwrq->length;
+ }
+
+ return -EINPROGRESS;
+}
+
+static int atmel_get_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_point *dwrq = &wrqu->essid;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* Get the current SSID */
+ if (priv->new_SSID_size != 0) {
+ memcpy(extra, priv->new_SSID, priv->new_SSID_size);
+ dwrq->length = priv->new_SSID_size;
+ } else {
+ memcpy(extra, priv->SSID, priv->SSID_size);
+ dwrq->length = priv->SSID_size;
+ }
+
+ dwrq->flags = !priv->connect_to_any_BSS; /* active */
+
+ return 0;
+}
+
+static int atmel_get_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct sockaddr *awrq = &wrqu->ap_addr;
+ struct atmel_private *priv = netdev_priv(dev);
+ memcpy(awrq->sa_data, priv->CurrentBSSID, ETH_ALEN);
+ awrq->sa_family = ARPHRD_ETHER;
+
+ return 0;
+}
+
+static int atmel_set_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_point *dwrq = &wrqu->encoding;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* Basic checking: do we have a key to set ?
+ * Note : with the new API, it's impossible to get a NULL pointer.
+ * Therefore, we need to check a key size == 0 instead.
+ * New version of iwconfig properly set the IW_ENCODE_NOKEY flag
+ * when no key is present (only change flags), but older versions
+ * don't do it. - Jean II */
+ if (dwrq->length > 0) {
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ int current_index = priv->default_key;
+ /* Check the size of the key */
+ if (dwrq->length > 13) {
+ return -EINVAL;
+ }
+ /* Check the index (none -> use current) */
+ if (index < 0 || index >= 4)
+ index = current_index;
+ else
+ priv->default_key = index;
+ /* Set the length */
+ if (dwrq->length > 5)
+ priv->wep_key_len[index] = 13;
+ else
+ if (dwrq->length > 0)
+ priv->wep_key_len[index] = 5;
+ else
+ /* Disable the key */
+ priv->wep_key_len[index] = 0;
+ /* Check if the key is not marked as invalid */
+ if (!(dwrq->flags & IW_ENCODE_NOKEY)) {
+ /* Cleanup */
+ memset(priv->wep_keys[index], 0, 13);
+ /* Copy the key in the driver */
+ memcpy(priv->wep_keys[index], extra, dwrq->length);
+ }
+ /* WE specify that if a valid key is set, encryption
+ * should be enabled (user may turn it off later)
+ * This is also how "iwconfig ethX key on" works */
+ if (index == current_index &&
+ priv->wep_key_len[index] > 0) {
+ priv->wep_is_on = 1;
+ priv->exclude_unencrypted = 1;
+ if (priv->wep_key_len[index] > 5) {
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+ priv->encryption_level = 2;
+ } else {
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+ priv->encryption_level = 1;
+ }
+ }
+ } else {
+ /* Do we want to just set the transmit key index ? */
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ if (index >= 0 && index < 4) {
+ priv->default_key = index;
+ } else
+ /* Don't complain if only change the mode */
+ if (!(dwrq->flags & IW_ENCODE_MODE))
+ return -EINVAL;
+ }
+ /* Read the flags */
+ if (dwrq->flags & IW_ENCODE_DISABLED) {
+ priv->wep_is_on = 0;
+ priv->encryption_level = 0;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+ } else {
+ priv->wep_is_on = 1;
+ if (priv->wep_key_len[priv->default_key] > 5) {
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+ priv->encryption_level = 2;
+ } else {
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+ priv->encryption_level = 1;
+ }
+ }
+ if (dwrq->flags & IW_ENCODE_RESTRICTED)
+ priv->exclude_unencrypted = 1;
+ if (dwrq->flags & IW_ENCODE_OPEN)
+ priv->exclude_unencrypted = 0;
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int atmel_get_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_point *dwrq = &wrqu->encoding;
+ struct atmel_private *priv = netdev_priv(dev);
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+
+ if (!priv->wep_is_on)
+ dwrq->flags = IW_ENCODE_DISABLED;
+ else {
+ if (priv->exclude_unencrypted)
+ dwrq->flags = IW_ENCODE_RESTRICTED;
+ else
+ dwrq->flags = IW_ENCODE_OPEN;
+ }
+ /* Which key do we want ? -1 -> tx index */
+ if (index < 0 || index >= 4)
+ index = priv->default_key;
+ dwrq->flags |= index + 1;
+ /* Copy the key to the user buffer */
+ dwrq->length = priv->wep_key_len[index];
+ if (dwrq->length > 16) {
+ dwrq->length = 0;
+ } else {
+ memset(extra, 0, 16);
+ memcpy(extra, priv->wep_keys[index], dwrq->length);
+ }
+
+ return 0;
+}
+
+static int atmel_set_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int idx, key_len, alg = ext->alg, set_key = 1;
+
+ /* Determine and validate the key index */
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > 4)
+ return -EINVAL;
+ idx--;
+ } else
+ idx = priv->default_key;
+
+ if (encoding->flags & IW_ENCODE_DISABLED)
+ alg = IW_ENCODE_ALG_NONE;
+
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ priv->default_key = idx;
+ set_key = ext->key_len > 0 ? 1 : 0;
+ }
+
+ if (set_key) {
+ /* Set the requested key first */
+ switch (alg) {
+ case IW_ENCODE_ALG_NONE:
+ priv->wep_is_on = 0;
+ priv->encryption_level = 0;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+ break;
+ case IW_ENCODE_ALG_WEP:
+ if (ext->key_len > 5) {
+ priv->wep_key_len[idx] = 13;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+ priv->encryption_level = 2;
+ } else if (ext->key_len > 0) {
+ priv->wep_key_len[idx] = 5;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+ priv->encryption_level = 1;
+ } else {
+ return -EINVAL;
+ }
+ priv->wep_is_on = 1;
+ memset(priv->wep_keys[idx], 0, 13);
+ key_len = min ((int)ext->key_len, priv->wep_key_len[idx]);
+ memcpy(priv->wep_keys[idx], ext->key, key_len);
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return -EINPROGRESS;
+}
+
+static int atmel_get_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int idx, max_key_len;
+
+ max_key_len = encoding->length - sizeof(*ext);
+ if (max_key_len < 0)
+ return -EINVAL;
+
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > 4)
+ return -EINVAL;
+ idx--;
+ } else
+ idx = priv->default_key;
+
+ encoding->flags = idx + 1;
+ memset(ext, 0, sizeof(*ext));
+
+ if (!priv->wep_is_on) {
+ ext->alg = IW_ENCODE_ALG_NONE;
+ ext->key_len = 0;
+ encoding->flags |= IW_ENCODE_DISABLED;
+ } else {
+ if (priv->encryption_level > 0)
+ ext->alg = IW_ENCODE_ALG_WEP;
+ else
+ return -EINVAL;
+
+ ext->key_len = priv->wep_key_len[idx];
+ memcpy(ext->key, priv->wep_keys[idx], ext->key_len);
+ encoding->flags |= IW_ENCODE_ENABLED;
+ }
+
+ return 0;
+}
+
+static int atmel_set_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_param *param = &wrqu->param;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_WPA_VERSION:
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+ case IW_AUTH_KEY_MGMT:
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ case IW_AUTH_PRIVACY_INVOKED:
+ /*
+ * atmel does not use these parameters
+ */
+ break;
+
+ case IW_AUTH_DROP_UNENCRYPTED:
+ priv->exclude_unencrypted = param->value ? 1 : 0;
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG: {
+ if (param->value & IW_AUTH_ALG_SHARED_KEY) {
+ priv->exclude_unencrypted = 1;
+ } else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
+ priv->exclude_unencrypted = 0;
+ } else
+ return -EINVAL;
+ break;
+ }
+
+ case IW_AUTH_WPA_ENABLED:
+ /* Silently accept disable of WPA */
+ if (param->value > 0)
+ return -EOPNOTSUPP;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ return -EINPROGRESS;
+}
+
+static int atmel_get_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_param *param = &wrqu->param;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_DROP_UNENCRYPTED:
+ param->value = priv->exclude_unencrypted;
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+ if (priv->exclude_unencrypted == 1)
+ param->value = IW_AUTH_ALG_SHARED_KEY;
+ else
+ param->value = IW_AUTH_ALG_OPEN_SYSTEM;
+ break;
+
+ case IW_AUTH_WPA_ENABLED:
+ param->value = 0;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+
+static int atmel_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ strcpy(wrqu->name, "IEEE 802.11-DS");
+ return 0;
+}
+
+static int atmel_set_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->bitrate;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ if (vwrq->fixed == 0) {
+ priv->tx_rate = 3;
+ priv->auto_tx_rate = 1;
+ } else {
+ priv->auto_tx_rate = 0;
+
+ /* Which type of value ? */
+ if ((vwrq->value < 4) && (vwrq->value >= 0)) {
+ /* Setting by rate index */
+ priv->tx_rate = vwrq->value;
+ } else {
+ /* Setting by frequency value */
+ switch (vwrq->value) {
+ case 1000000:
+ priv->tx_rate = 0;
+ break;
+ case 2000000:
+ priv->tx_rate = 1;
+ break;
+ case 5500000:
+ priv->tx_rate = 2;
+ break;
+ case 11000000:
+ priv->tx_rate = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ }
+
+ return -EINPROGRESS;
+}
+
+static int atmel_set_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ __u32 *uwrq = &wrqu->mode;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ if (*uwrq != IW_MODE_ADHOC && *uwrq != IW_MODE_INFRA)
+ return -EINVAL;
+
+ priv->operating_mode = *uwrq;
+ return -EINPROGRESS;
+}
+
+static int atmel_get_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ __u32 *uwrq = &wrqu->mode;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ *uwrq = priv->operating_mode;
+ return 0;
+}
+
+static int atmel_get_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->bitrate;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ if (priv->auto_tx_rate) {
+ vwrq->fixed = 0;
+ vwrq->value = 11000000;
+ } else {
+ vwrq->fixed = 1;
+ switch (priv->tx_rate) {
+ case 0:
+ vwrq->value = 1000000;
+ break;
+ case 1:
+ vwrq->value = 2000000;
+ break;
+ case 2:
+ vwrq->value = 5500000;
+ break;
+ case 3:
+ vwrq->value = 11000000;
+ break;
+ }
+ }
+ return 0;
+}
+
+static int atmel_set_power(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->power;
+ struct atmel_private *priv = netdev_priv(dev);
+ priv->power_mode = vwrq->disabled ? 0 : 1;
+ return -EINPROGRESS;
+}
+
+static int atmel_get_power(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->power;
+ struct atmel_private *priv = netdev_priv(dev);
+ vwrq->disabled = priv->power_mode ? 0 : 1;
+ vwrq->flags = IW_POWER_ON;
+ return 0;
+}
+
+static int atmel_set_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->retry;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ if (!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) {
+ if (vwrq->flags & IW_RETRY_LONG)
+ priv->long_retry = vwrq->value;
+ else if (vwrq->flags & IW_RETRY_SHORT)
+ priv->short_retry = vwrq->value;
+ else {
+ /* No modifier : set both */
+ priv->long_retry = vwrq->value;
+ priv->short_retry = vwrq->value;
+ }
+ return -EINPROGRESS;
+ }
+
+ return -EINVAL;
+}
+
+static int atmel_get_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->retry;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ vwrq->disabled = 0; /* Can't be disabled */
+
+ /* Note : by default, display the short retry number */
+ if (vwrq->flags & IW_RETRY_LONG) {
+ vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
+ vwrq->value = priv->long_retry;
+ } else {
+ vwrq->flags = IW_RETRY_LIMIT;
+ vwrq->value = priv->short_retry;
+ if (priv->long_retry != priv->short_retry)
+ vwrq->flags |= IW_RETRY_SHORT;
+ }
+
+ return 0;
+}
+
+static int atmel_set_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->rts;
+ struct atmel_private *priv = netdev_priv(dev);
+ int rthr = vwrq->value;
+
+ if (vwrq->disabled)
+ rthr = 2347;
+ if ((rthr < 0) || (rthr > 2347)) {
+ return -EINVAL;
+ }
+ priv->rts_threshold = rthr;
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int atmel_get_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->rts;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ vwrq->value = priv->rts_threshold;
+ vwrq->disabled = (vwrq->value >= 2347);
+ vwrq->fixed = 1;
+
+ return 0;
+}
+
+static int atmel_set_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->frag;
+ struct atmel_private *priv = netdev_priv(dev);
+ int fthr = vwrq->value;
+
+ if (vwrq->disabled)
+ fthr = 2346;
+ if ((fthr < 256) || (fthr > 2346)) {
+ return -EINVAL;
+ }
+ fthr &= ~0x1; /* Get an even value - is it really needed ??? */
+ priv->frag_threshold = fthr;
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int atmel_get_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_param *vwrq = &wrqu->frag;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ vwrq->value = priv->frag_threshold;
+ vwrq->disabled = (vwrq->value >= 2346);
+ vwrq->fixed = 1;
+
+ return 0;
+}
+
+static int atmel_set_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_freq *fwrq = &wrqu->freq;
+ struct atmel_private *priv = netdev_priv(dev);
+ int rc = -EINPROGRESS; /* Call commit handler */
+
+ /* If setting by frequency, convert to a channel */
+ if (fwrq->e == 1) {
+ int f = fwrq->m / 100000;
+
+ /* Hack to fall through... */
+ fwrq->e = 0;
+ fwrq->m = ieee80211_frequency_to_channel(f);
+ }
+ /* Setting by channel number */
+ if (fwrq->m < 0 || fwrq->m > 1000 || fwrq->e > 0)
+ rc = -EOPNOTSUPP;
+ else {
+ int channel = fwrq->m;
+ if (atmel_validate_channel(priv, channel) == 0) {
+ priv->channel = channel;
+ } else {
+ rc = -EINVAL;
+ }
+ }
+ return rc;
+}
+
+static int atmel_get_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_freq *fwrq = &wrqu->freq;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ fwrq->m = priv->channel;
+ fwrq->e = 0;
+ return 0;
+}
+
+static int atmel_set_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *dwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ /* Note : you may have realised that, as this is a SET operation,
+ * this is privileged and therefore a normal user can't
+ * perform scanning.
+ * This is not an error, while the device perform scanning,
+ * traffic doesn't flow, so it's a perfect DoS...
+ * Jean II */
+
+ if (priv->station_state == STATION_STATE_DOWN)
+ return -EAGAIN;
+
+ /* Timeout old surveys. */
+ if (time_after(jiffies, priv->last_survey + 20 * HZ))
+ priv->site_survey_state = SITE_SURVEY_IDLE;
+ priv->last_survey = jiffies;
+
+ /* Initiate a scan command */
+ if (priv->site_survey_state == SITE_SURVEY_IN_PROGRESS)
+ return -EBUSY;
+
+ del_timer_sync(&priv->management_timer);
+ spin_lock_irqsave(&priv->irqlock, flags);
+
+ priv->site_survey_state = SITE_SURVEY_IN_PROGRESS;
+ priv->fast_scan = 0;
+ atmel_scan(priv, 0);
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+
+ return 0;
+}
+
+static int atmel_get_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_point *dwrq = &wrqu->data;
+ struct atmel_private *priv = netdev_priv(dev);
+ int i;
+ char *current_ev = extra;
+ struct iw_event iwe;
+
+ if (priv->site_survey_state != SITE_SURVEY_COMPLETED)
+ return -EAGAIN;
+
+ for (i = 0; i < priv->BSS_list_entries; i++) {
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, ETH_ALEN);
+ current_ev = iwe_stream_add_event(info, current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, IW_EV_ADDR_LEN);
+
+ iwe.u.data.length = priv->BSSinfo[i].SSIDsize;
+ if (iwe.u.data.length > 32)
+ iwe.u.data.length = 32;
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ current_ev = iwe_stream_add_point(info, current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, priv->BSSinfo[i].SSID);
+
+ iwe.cmd = SIOCGIWMODE;
+ iwe.u.mode = priv->BSSinfo[i].BSStype;
+ current_ev = iwe_stream_add_event(info, current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, IW_EV_UINT_LEN);
+
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = priv->BSSinfo[i].channel;
+ iwe.u.freq.e = 0;
+ current_ev = iwe_stream_add_event(info, current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, IW_EV_FREQ_LEN);
+
+ /* Add quality statistics */
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.level = priv->BSSinfo[i].RSSI;
+ iwe.u.qual.qual = iwe.u.qual.level;
+ /* iwe.u.qual.noise = SOMETHING */
+ current_ev = iwe_stream_add_event(info, current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, IW_EV_QUAL_LEN);
+
+
+ iwe.cmd = SIOCGIWENCODE;
+ if (priv->BSSinfo[i].UsingWEP)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(info, current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, NULL);
+ }
+
+ /* Length of data */
+ dwrq->length = (current_ev - extra);
+ dwrq->flags = 0;
+
+ return 0;
+}
+
+static int atmel_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_point *dwrq = &wrqu->data;
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_range *range = (struct iw_range *) extra;
+ int k, i, j;
+
+ dwrq->length = sizeof(struct iw_range);
+ memset(range, 0, sizeof(struct iw_range));
+ range->min_nwid = 0x0000;
+ range->max_nwid = 0x0000;
+ range->num_channels = 0;
+ for (j = 0; j < ARRAY_SIZE(channel_table); j++)
+ if (priv->reg_domain == channel_table[j].reg_domain) {
+ range->num_channels = channel_table[j].max - channel_table[j].min + 1;
+ break;
+ }
+ if (range->num_channels != 0) {
+ for (k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) {
+ range->freq[k].i = i; /* List index */
+
+ /* Values in MHz -> * 10^5 * 10 */
+ range->freq[k].m = 100000 *
+ ieee80211_channel_to_frequency(i, NL80211_BAND_2GHZ);
+ range->freq[k++].e = 1;
+ }
+ range->num_frequency = k;
+ }
+
+ range->max_qual.qual = 100;
+ range->max_qual.level = 100;
+ range->max_qual.noise = 0;
+ range->max_qual.updated = IW_QUAL_NOISE_INVALID;
+
+ range->avg_qual.qual = 50;
+ range->avg_qual.level = 50;
+ range->avg_qual.noise = 0;
+ range->avg_qual.updated = IW_QUAL_NOISE_INVALID;
+
+ range->sensitivity = 0;
+
+ range->bitrate[0] = 1000000;
+ range->bitrate[1] = 2000000;
+ range->bitrate[2] = 5500000;
+ range->bitrate[3] = 11000000;
+ range->num_bitrates = 4;
+
+ range->min_rts = 0;
+ range->max_rts = 2347;
+ range->min_frag = 256;
+ range->max_frag = 2346;
+
+ range->encoding_size[0] = 5;
+ range->encoding_size[1] = 13;
+ range->num_encoding_sizes = 2;
+ range->max_encoding_tokens = 4;
+
+ range->pmp_flags = IW_POWER_ON;
+ range->pmt_flags = IW_POWER_ON;
+ range->pm_capa = 0;
+
+ range->we_version_source = WIRELESS_EXT;
+ range->we_version_compiled = WIRELESS_EXT;
+ range->retry_capa = IW_RETRY_LIMIT ;
+ range->retry_flags = IW_RETRY_LIMIT;
+ range->r_time_flags = 0;
+ range->min_retry = 1;
+ range->max_retry = 65535;
+
+ return 0;
+}
+
+static int atmel_set_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct sockaddr *awrq = &wrqu->ap_addr;
+ struct atmel_private *priv = netdev_priv(dev);
+ int i;
+ static const u8 any[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+ static const u8 off[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ unsigned long flags;
+
+ if (awrq->sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+
+ if (!memcmp(any, awrq->sa_data, 6) ||
+ !memcmp(off, awrq->sa_data, 6)) {
+ del_timer_sync(&priv->management_timer);
+ spin_lock_irqsave(&priv->irqlock, flags);
+ atmel_scan(priv, 1);
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+ return 0;
+ }
+
+ for (i = 0; i < priv->BSS_list_entries; i++) {
+ if (memcmp(priv->BSSinfo[i].BSSID, awrq->sa_data, 6) == 0) {
+ if (!priv->wep_is_on && priv->BSSinfo[i].UsingWEP) {
+ return -EINVAL;
+ } else if (priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) {
+ return -EINVAL;
+ } else {
+ del_timer_sync(&priv->management_timer);
+ spin_lock_irqsave(&priv->irqlock, flags);
+ atmel_join_bss(priv, i);
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+ return 0;
+ }
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int atmel_config_commit(struct net_device *dev,
+ struct iw_request_info *info, /* NULL */
+ union iwreq_data *zwrq, /* NULL */
+ char *extra) /* NULL */
+{
+ return atmel_open(dev);
+}
+
+static const iw_handler atmel_handler[] =
+{
+ IW_HANDLER(SIOCSIWCOMMIT, atmel_config_commit),
+ IW_HANDLER(SIOCGIWNAME, atmel_get_name),
+ IW_HANDLER(SIOCSIWFREQ, atmel_set_freq),
+ IW_HANDLER(SIOCGIWFREQ, atmel_get_freq),
+ IW_HANDLER(SIOCSIWMODE, atmel_set_mode),
+ IW_HANDLER(SIOCGIWMODE, atmel_get_mode),
+ IW_HANDLER(SIOCGIWRANGE, atmel_get_range),
+ IW_HANDLER(SIOCSIWAP, atmel_set_wap),
+ IW_HANDLER(SIOCGIWAP, atmel_get_wap),
+ IW_HANDLER(SIOCSIWSCAN, atmel_set_scan),
+ IW_HANDLER(SIOCGIWSCAN, atmel_get_scan),
+ IW_HANDLER(SIOCSIWESSID, atmel_set_essid),
+ IW_HANDLER(SIOCGIWESSID, atmel_get_essid),
+ IW_HANDLER(SIOCSIWRATE, atmel_set_rate),
+ IW_HANDLER(SIOCGIWRATE, atmel_get_rate),
+ IW_HANDLER(SIOCSIWRTS, atmel_set_rts),
+ IW_HANDLER(SIOCGIWRTS, atmel_get_rts),
+ IW_HANDLER(SIOCSIWFRAG, atmel_set_frag),
+ IW_HANDLER(SIOCGIWFRAG, atmel_get_frag),
+ IW_HANDLER(SIOCSIWRETRY, atmel_set_retry),
+ IW_HANDLER(SIOCGIWRETRY, atmel_get_retry),
+ IW_HANDLER(SIOCSIWENCODE, atmel_set_encode),
+ IW_HANDLER(SIOCGIWENCODE, atmel_get_encode),
+ IW_HANDLER(SIOCSIWPOWER, atmel_set_power),
+ IW_HANDLER(SIOCGIWPOWER, atmel_get_power),
+ IW_HANDLER(SIOCSIWAUTH, atmel_set_auth),
+ IW_HANDLER(SIOCGIWAUTH, atmel_get_auth),
+ IW_HANDLER(SIOCSIWENCODEEXT, atmel_set_encodeext),
+ IW_HANDLER(SIOCGIWENCODEEXT, atmel_get_encodeext),
+};
+
+static const iw_handler atmel_private_handler[] =
+{
+ NULL, /* SIOCIWFIRSTPRIV */
+};
+
+struct atmel_priv_ioctl {
+ char id[32];
+ unsigned char __user *data;
+ unsigned short len;
+};
+
+#define ATMELFWL SIOCIWFIRSTPRIV
+#define ATMELIDIFC ATMELFWL + 1
+#define ATMELRD ATMELFWL + 2
+#define ATMELMAGIC 0x51807
+#define REGDOMAINSZ 20
+
+static const struct iw_priv_args atmel_private_args[] = {
+ {
+ .cmd = ATMELFWL,
+ .set_args = IW_PRIV_TYPE_BYTE
+ | IW_PRIV_SIZE_FIXED
+ | sizeof(struct atmel_priv_ioctl),
+ .get_args = IW_PRIV_TYPE_NONE,
+ .name = "atmelfwl"
+ }, {
+ .cmd = ATMELIDIFC,
+ .set_args = IW_PRIV_TYPE_NONE,
+ .get_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ .name = "atmelidifc"
+ }, {
+ .cmd = ATMELRD,
+ .set_args = IW_PRIV_TYPE_CHAR | REGDOMAINSZ,
+ .get_args = IW_PRIV_TYPE_NONE,
+ .name = "regdomain"
+ },
+};
+
+static const struct iw_handler_def atmel_handler_def = {
+ .num_standard = ARRAY_SIZE(atmel_handler),
+ .num_private = ARRAY_SIZE(atmel_private_handler),
+ .num_private_args = ARRAY_SIZE(atmel_private_args),
+ .standard = atmel_handler,
+ .private = atmel_private_handler,
+ .private_args = (struct iw_priv_args *) atmel_private_args,
+ .get_wireless_stats = atmel_get_wireless_stats
+};
+
+static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ int i, rc = 0;
+ struct atmel_private *priv = netdev_priv(dev);
+ struct atmel_priv_ioctl com;
+ struct iwreq *wrq = (struct iwreq *) rq;
+ unsigned char *new_firmware;
+ char domain[REGDOMAINSZ + 1];
+
+ switch (cmd) {
+ case ATMELIDIFC:
+ wrq->u.param.value = ATMELMAGIC;
+ break;
+
+ case ATMELFWL:
+ if (copy_from_user(&com, rq->ifr_data, sizeof(com))) {
+ rc = -EFAULT;
+ break;
+ }
+
+ if (!capable(CAP_NET_ADMIN)) {
+ rc = -EPERM;
+ break;
+ }
+
+ new_firmware = memdup_user(com.data, com.len);
+ if (IS_ERR(new_firmware)) {
+ rc = PTR_ERR(new_firmware);
+ break;
+ }
+
+ kfree(priv->firmware);
+
+ priv->firmware = new_firmware;
+ priv->firmware_length = com.len;
+ strncpy(priv->firmware_id, com.id, 31);
+ priv->firmware_id[31] = '\0';
+ break;
+
+ case ATMELRD:
+ if (copy_from_user(domain, rq->ifr_data, REGDOMAINSZ)) {
+ rc = -EFAULT;
+ break;
+ }
+
+ if (!capable(CAP_NET_ADMIN)) {
+ rc = -EPERM;
+ break;
+ }
+
+ domain[REGDOMAINSZ] = 0;
+ rc = -EINVAL;
+ for (i = 0; i < ARRAY_SIZE(channel_table); i++) {
+ if (!strcasecmp(channel_table[i].name, domain)) {
+ priv->config_reg_domain = channel_table[i].reg_domain;
+ rc = 0;
+ }
+ }
+
+ if (rc == 0 && priv->station_state != STATION_STATE_DOWN)
+ rc = atmel_open(dev);
+ break;
+
+ default:
+ rc = -EOPNOTSUPP;
+ }
+
+ return rc;
+}
+
+struct auth_body {
+ __le16 alg;
+ __le16 trans_seq;
+ __le16 status;
+ u8 el_id;
+ u8 chall_text_len;
+ u8 chall_text[253];
+};
+
+static void atmel_enter_state(struct atmel_private *priv, int new_state)
+{
+ int old_state = priv->station_state;
+
+ if (new_state == old_state)
+ return;
+
+ priv->station_state = new_state;
+
+ if (new_state == STATION_STATE_READY) {
+ netif_start_queue(priv->dev);
+ netif_carrier_on(priv->dev);
+ }
+
+ if (old_state == STATION_STATE_READY) {
+ netif_carrier_off(priv->dev);
+ if (netif_running(priv->dev))
+ netif_stop_queue(priv->dev);
+ priv->last_beacon_timestamp = 0;
+ }
+}
+
+static void atmel_scan(struct atmel_private *priv, int specific_ssid)
+{
+ struct {
+ u8 BSSID[ETH_ALEN];
+ u8 SSID[MAX_SSID_LENGTH];
+ u8 scan_type;
+ u8 channel;
+ __le16 BSS_type;
+ __le16 min_channel_time;
+ __le16 max_channel_time;
+ u8 options;
+ u8 SSID_size;
+ } cmd;
+
+ eth_broadcast_addr(cmd.BSSID);
+
+ if (priv->fast_scan) {
+ cmd.SSID_size = priv->SSID_size;
+ memcpy(cmd.SSID, priv->SSID, priv->SSID_size);
+ cmd.min_channel_time = cpu_to_le16(10);
+ cmd.max_channel_time = cpu_to_le16(50);
+ } else {
+ priv->BSS_list_entries = 0;
+ cmd.SSID_size = 0;
+ cmd.min_channel_time = cpu_to_le16(10);
+ cmd.max_channel_time = cpu_to_le16(120);
+ }
+
+ cmd.options = 0;
+
+ if (!specific_ssid)
+ cmd.options |= SCAN_OPTIONS_SITE_SURVEY;
+
+ cmd.channel = (priv->channel & 0x7f);
+ cmd.scan_type = SCAN_TYPE_ACTIVE;
+ cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ?
+ BSS_TYPE_AD_HOC : BSS_TYPE_INFRASTRUCTURE);
+
+ atmel_send_command(priv, CMD_Scan, &cmd, sizeof(cmd));
+
+ /* This must come after all hardware access to avoid being messed up
+ by stuff happening in interrupt context after we leave STATE_DOWN */
+ atmel_enter_state(priv, STATION_STATE_SCANNING);
+}
+
+static void join(struct atmel_private *priv, int type)
+{
+ struct {
+ u8 BSSID[6];
+ u8 SSID[MAX_SSID_LENGTH];
+ u8 BSS_type; /* this is a short in a scan command - weird */
+ u8 channel;
+ __le16 timeout;
+ u8 SSID_size;
+ u8 reserved;
+ } cmd;
+
+ cmd.SSID_size = priv->SSID_size;
+ memcpy(cmd.SSID, priv->SSID, priv->SSID_size);
+ memcpy(cmd.BSSID, priv->CurrentBSSID, ETH_ALEN);
+ cmd.channel = (priv->channel & 0x7f);
+ cmd.BSS_type = type;
+ cmd.timeout = cpu_to_le16(2000);
+
+ atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd));
+}
+
+static void start(struct atmel_private *priv, int type)
+{
+ struct {
+ u8 BSSID[6];
+ u8 SSID[MAX_SSID_LENGTH];
+ u8 BSS_type;
+ u8 channel;
+ u8 SSID_size;
+ u8 reserved[3];
+ } cmd;
+
+ cmd.SSID_size = priv->SSID_size;
+ memcpy(cmd.SSID, priv->SSID, priv->SSID_size);
+ memcpy(cmd.BSSID, priv->BSSID, ETH_ALEN);
+ cmd.BSS_type = type;
+ cmd.channel = (priv->channel & 0x7f);
+
+ atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd));
+}
+
+static void handle_beacon_probe(struct atmel_private *priv, u16 capability,
+ u8 channel)
+{
+ int rejoin = 0;
+ int new = capability & WLAN_CAPABILITY_SHORT_PREAMBLE ?
+ SHORT_PREAMBLE : LONG_PREAMBLE;
+
+ if (priv->preamble != new) {
+ priv->preamble = new;
+ rejoin = 1;
+ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, new);
+ }
+
+ if (priv->channel != channel) {
+ priv->channel = channel;
+ rejoin = 1;
+ atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_CHANNEL_POS, channel);
+ }
+
+ if (rejoin) {
+ priv->station_is_associated = 0;
+ atmel_enter_state(priv, STATION_STATE_JOINNING);
+
+ if (priv->operating_mode == IW_MODE_INFRA)
+ join(priv, BSS_TYPE_INFRASTRUCTURE);
+ else
+ join(priv, BSS_TYPE_AD_HOC);
+ }
+}
+
+static void send_authentication_request(struct atmel_private *priv, u16 system,
+ u8 *challenge, int challenge_len)
+{
+ struct ieee80211_hdr header;
+ struct auth_body auth;
+
+ header.frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
+ header.duration_id = cpu_to_le16(0x8000);
+ header.seq_ctrl = 0;
+ memcpy(header.addr1, priv->CurrentBSSID, ETH_ALEN);
+ memcpy(header.addr2, priv->dev->dev_addr, ETH_ALEN);
+ memcpy(header.addr3, priv->CurrentBSSID, ETH_ALEN);
+
+ if (priv->wep_is_on && priv->CurrentAuthentTransactionSeqNum != 1)
+ /* no WEP for authentication frames with TrSeqNo 1 */
+ header.frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+
+ auth.alg = cpu_to_le16(system);
+
+ auth.status = 0;
+ auth.trans_seq = cpu_to_le16(priv->CurrentAuthentTransactionSeqNum);
+ priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1;
+ priv->CurrentAuthentTransactionSeqNum += 2;
+
+ if (challenge_len != 0) {
+ auth.el_id = 16; /* challenge_text */
+ auth.chall_text_len = challenge_len;
+ memcpy(auth.chall_text, challenge, challenge_len);
+ atmel_transmit_management_frame(priv, &header, (u8 *)&auth, 8 + challenge_len);
+ } else {
+ atmel_transmit_management_frame(priv, &header, (u8 *)&auth, 6);
+ }
+}
+
+static void send_association_request(struct atmel_private *priv, int is_reassoc)
+{
+ u8 *ssid_el_p;
+ int bodysize;
+ struct ieee80211_hdr header;
+ struct ass_req_format {
+ __le16 capability;
+ __le16 listen_interval;
+ u8 ap[ETH_ALEN]; /* nothing after here directly accessible */
+ u8 ssid_el_id;
+ u8 ssid_len;
+ u8 ssid[MAX_SSID_LENGTH];
+ u8 sup_rates_el_id;
+ u8 sup_rates_len;
+ u8 rates[4];
+ } body;
+
+ header.frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ (is_reassoc ? IEEE80211_STYPE_REASSOC_REQ : IEEE80211_STYPE_ASSOC_REQ));
+ header.duration_id = cpu_to_le16(0x8000);
+ header.seq_ctrl = 0;
+
+ memcpy(header.addr1, priv->CurrentBSSID, ETH_ALEN);
+ memcpy(header.addr2, priv->dev->dev_addr, ETH_ALEN);
+ memcpy(header.addr3, priv->CurrentBSSID, ETH_ALEN);
+
+ body.capability = cpu_to_le16(WLAN_CAPABILITY_ESS);
+ if (priv->wep_is_on)
+ body.capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
+ if (priv->preamble == SHORT_PREAMBLE)
+ body.capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_PREAMBLE);
+
+ body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period);
+
+ /* current AP address - only in reassoc frame */
+ if (is_reassoc) {
+ memcpy(body.ap, priv->CurrentBSSID, ETH_ALEN);
+ ssid_el_p = &body.ssid_el_id;
+ bodysize = 18 + priv->SSID_size;
+ } else {
+ ssid_el_p = &body.ap[0];
+ bodysize = 12 + priv->SSID_size;
+ }
+
+ ssid_el_p[0] = WLAN_EID_SSID;
+ ssid_el_p[1] = priv->SSID_size;
+ memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
+ ssid_el_p[2 + priv->SSID_size] = WLAN_EID_SUPP_RATES;
+ ssid_el_p[3 + priv->SSID_size] = 4; /* len of supported rates */
+ memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
+
+ atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
+}
+
+static int is_frame_from_current_bss(struct atmel_private *priv,
+ struct ieee80211_hdr *header)
+{
+ if (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FROMDS)
+ return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0;
+ else
+ return memcmp(header->addr2, priv->CurrentBSSID, 6) == 0;
+}
+
+static int retrieve_bss(struct atmel_private *priv)
+{
+ int i;
+ int max_rssi = -128;
+ int max_index = -1;
+
+ if (priv->BSS_list_entries == 0)
+ return -1;
+
+ if (priv->connect_to_any_BSS) {
+ /* Select a BSS with the max-RSSI but of the same type and of
+ the same WEP mode and that it is not marked as 'bad' (i.e.
+ we had previously failed to connect to this BSS with the
+ settings that we currently use) */
+ priv->current_BSS = 0;
+ for (i = 0; i < priv->BSS_list_entries; i++) {
+ if (priv->operating_mode == priv->BSSinfo[i].BSStype &&
+ ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) ||
+ (priv->wep_is_on && priv->BSSinfo[i].UsingWEP)) &&
+ !(priv->BSSinfo[i].channel & 0x80)) {
+ max_rssi = priv->BSSinfo[i].RSSI;
+ priv->current_BSS = max_index = i;
+ }
+ }
+ return max_index;
+ }
+
+ for (i = 0; i < priv->BSS_list_entries; i++) {
+ if (priv->SSID_size == priv->BSSinfo[i].SSIDsize &&
+ memcmp(priv->SSID, priv->BSSinfo[i].SSID, priv->SSID_size) == 0 &&
+ priv->operating_mode == priv->BSSinfo[i].BSStype &&
+ atmel_validate_channel(priv, priv->BSSinfo[i].channel) == 0) {
+ if (priv->BSSinfo[i].RSSI >= max_rssi) {
+ max_rssi = priv->BSSinfo[i].RSSI;
+ max_index = i;
+ }
+ }
+ }
+ return max_index;
+}
+
+static void store_bss_info(struct atmel_private *priv,
+ struct ieee80211_hdr *header, u16 capability,
+ u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len,
+ u8 *ssid, int is_beacon)
+{
+ u8 *bss = capability & WLAN_CAPABILITY_ESS ? header->addr2 : header->addr3;
+ int i, index;
+
+ for (index = -1, i = 0; i < priv->BSS_list_entries; i++)
+ if (memcmp(bss, priv->BSSinfo[i].BSSID, ETH_ALEN) == 0)
+ index = i;
+
+ /* If we process a probe and an entry from this BSS exists
+ we will update the BSS entry with the info from this BSS.
+ If we process a beacon we will only update RSSI */
+
+ if (index == -1) {
+ if (priv->BSS_list_entries == MAX_BSS_ENTRIES)
+ return;
+ index = priv->BSS_list_entries++;
+ memcpy(priv->BSSinfo[index].BSSID, bss, ETH_ALEN);
+ priv->BSSinfo[index].RSSI = rssi;
+ } else {
+ if (rssi > priv->BSSinfo[index].RSSI)
+ priv->BSSinfo[index].RSSI = rssi;
+ if (is_beacon)
+ return;
+ }
+
+ priv->BSSinfo[index].channel = channel;
+ priv->BSSinfo[index].beacon_period = beacon_period;
+ priv->BSSinfo[index].UsingWEP = capability & WLAN_CAPABILITY_PRIVACY;
+ memcpy(priv->BSSinfo[index].SSID, ssid, ssid_len);
+ priv->BSSinfo[index].SSIDsize = ssid_len;
+
+ if (capability & WLAN_CAPABILITY_IBSS)
+ priv->BSSinfo[index].BSStype = IW_MODE_ADHOC;
+ else if (capability & WLAN_CAPABILITY_ESS)
+ priv->BSSinfo[index].BSStype = IW_MODE_INFRA;
+
+ priv->BSSinfo[index].preamble = capability & WLAN_CAPABILITY_SHORT_PREAMBLE ?
+ SHORT_PREAMBLE : LONG_PREAMBLE;
+}
+
+static void authenticate(struct atmel_private *priv, u16 frame_len)
+{
+ struct auth_body *auth = (struct auth_body *)priv->rx_buf;
+ u16 status = le16_to_cpu(auth->status);
+ u16 trans_seq_no = le16_to_cpu(auth->trans_seq);
+ u16 system = le16_to_cpu(auth->alg);
+
+ if (status == WLAN_STATUS_SUCCESS && !priv->wep_is_on) {
+ /* no WEP */
+ if (priv->station_was_associated) {
+ atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
+ send_association_request(priv, 1);
+ return;
+ } else {
+ atmel_enter_state(priv, STATION_STATE_ASSOCIATING);
+ send_association_request(priv, 0);
+ return;
+ }
+ }
+
+ if (status == WLAN_STATUS_SUCCESS && priv->wep_is_on) {
+ int should_associate = 0;
+ /* WEP */
+ if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum)
+ return;
+
+ if (system == WLAN_AUTH_OPEN) {
+ if (trans_seq_no == 0x0002) {
+ should_associate = 1;
+ }
+ } else if (system == WLAN_AUTH_SHARED_KEY) {
+ if (trans_seq_no == 0x0002 &&
+ auth->el_id == WLAN_EID_CHALLENGE) {
+ send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len);
+ return;
+ } else if (trans_seq_no == 0x0004) {
+ should_associate = 1;
+ }
+ }
+
+ if (should_associate) {
+ if (priv->station_was_associated) {
+ atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
+ send_association_request(priv, 1);
+ return;
+ } else {
+ atmel_enter_state(priv, STATION_STATE_ASSOCIATING);
+ send_association_request(priv, 0);
+ return;
+ }
+ }
+ }
+
+ if (status == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) {
+ /* Flip back and forth between WEP auth modes until the max
+ * authentication tries has been exceeded.
+ */
+ if (system == WLAN_AUTH_OPEN) {
+ priv->CurrentAuthentTransactionSeqNum = 0x001;
+ priv->exclude_unencrypted = 1;
+ send_authentication_request(priv, WLAN_AUTH_SHARED_KEY, NULL, 0);
+ return;
+ } else if (system == WLAN_AUTH_SHARED_KEY
+ && priv->wep_is_on) {
+ priv->CurrentAuthentTransactionSeqNum = 0x001;
+ priv->exclude_unencrypted = 0;
+ send_authentication_request(priv, WLAN_AUTH_OPEN, NULL, 0);
+ return;
+ } else if (priv->connect_to_any_BSS) {
+ int bss_index;
+
+ priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
+
+ if ((bss_index = retrieve_bss(priv)) != -1) {
+ atmel_join_bss(priv, bss_index);
+ return;
+ }
+ }
+ }
+
+ priv->AuthenticationRequestRetryCnt = 0;
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+}
+
+static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype)
+{
+ struct ass_resp_format {
+ __le16 capability;
+ __le16 status;
+ __le16 ass_id;
+ u8 el_id;
+ u8 length;
+ u8 rates[4];
+ } *ass_resp = (struct ass_resp_format *)priv->rx_buf;
+
+ u16 status = le16_to_cpu(ass_resp->status);
+ u16 ass_id = le16_to_cpu(ass_resp->ass_id);
+ u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length;
+
+ union iwreq_data wrqu;
+
+ if (frame_len < 8 + rates_len)
+ return;
+
+ if (status == WLAN_STATUS_SUCCESS) {
+ if (subtype == IEEE80211_STYPE_ASSOC_RESP)
+ priv->AssociationRequestRetryCnt = 0;
+ else
+ priv->ReAssociationRequestRetryCnt = 0;
+
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff);
+ atmel_set_mib(priv, Phy_Mib_Type,
+ PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len);
+ if (priv->power_mode == 0) {
+ priv->listen_interval = 1;
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+ } else {
+ priv->listen_interval = 2;
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_PS_MODE_POS, PS_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2);
+ }
+
+ priv->station_is_associated = 1;
+ priv->station_was_associated = 1;
+ atmel_enter_state(priv, STATION_STATE_READY);
+
+ /* Send association event to userspace */
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ memcpy(wrqu.ap_addr.sa_data, priv->CurrentBSSID, ETH_ALEN);
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+
+ return;
+ }
+
+ if (subtype == IEEE80211_STYPE_ASSOC_RESP &&
+ status != WLAN_STATUS_ASSOC_DENIED_RATES &&
+ status != WLAN_STATUS_CAPS_UNSUPPORTED &&
+ priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ priv->AssociationRequestRetryCnt++;
+ send_association_request(priv, 0);
+ return;
+ }
+
+ if (subtype == IEEE80211_STYPE_REASSOC_RESP &&
+ status != WLAN_STATUS_ASSOC_DENIED_RATES &&
+ status != WLAN_STATUS_CAPS_UNSUPPORTED &&
+ priv->ReAssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ priv->ReAssociationRequestRetryCnt++;
+ send_association_request(priv, 1);
+ return;
+ }
+
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+
+ if (priv->connect_to_any_BSS) {
+ int bss_index;
+ priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
+
+ if ((bss_index = retrieve_bss(priv)) != -1)
+ atmel_join_bss(priv, bss_index);
+ }
+}
+
+static void atmel_join_bss(struct atmel_private *priv, int bss_index)
+{
+ struct bss_info *bss = &priv->BSSinfo[bss_index];
+
+ memcpy(priv->CurrentBSSID, bss->BSSID, ETH_ALEN);
+ memcpy(priv->SSID, bss->SSID, priv->SSID_size = bss->SSIDsize);
+
+ /* The WPA stuff cares about the current AP address */
+ if (priv->use_wpa)
+ build_wpa_mib(priv);
+
+ /* When switching to AdHoc turn OFF Power Save if needed */
+
+ if (bss->BSStype == IW_MODE_ADHOC &&
+ priv->operating_mode != IW_MODE_ADHOC &&
+ priv->power_mode) {
+ priv->power_mode = 0;
+ priv->listen_interval = 1;
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+ }
+
+ priv->operating_mode = bss->BSStype;
+ priv->channel = bss->channel & 0x7f;
+ priv->beacon_period = bss->beacon_period;
+
+ if (priv->preamble != bss->preamble) {
+ priv->preamble = bss->preamble;
+ atmel_set_mib8(priv, Local_Mib_Type,
+ LOCAL_MIB_PREAMBLE_TYPE, bss->preamble);
+ }
+
+ if (!priv->wep_is_on && bss->UsingWEP) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ return;
+ }
+
+ if (priv->wep_is_on && !bss->UsingWEP) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ return;
+ }
+
+ atmel_enter_state(priv, STATION_STATE_JOINNING);
+
+ if (priv->operating_mode == IW_MODE_INFRA)
+ join(priv, BSS_TYPE_INFRASTRUCTURE);
+ else
+ join(priv, BSS_TYPE_AD_HOC);
+}
+
+static void restart_search(struct atmel_private *priv)
+{
+ int bss_index;
+
+ if (!priv->connect_to_any_BSS) {
+ atmel_scan(priv, 1);
+ } else {
+ priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
+
+ if ((bss_index = retrieve_bss(priv)) != -1)
+ atmel_join_bss(priv, bss_index);
+ else
+ atmel_scan(priv, 0);
+ }
+}
+
+static void smooth_rssi(struct atmel_private *priv, u8 rssi)
+{
+ u8 old = priv->wstats.qual.level;
+ u8 max_rssi = 42; /* 502-rmfd-revd max by experiment, default for now */
+
+ switch (priv->firmware_type) {
+ case ATMEL_FW_TYPE_502E:
+ max_rssi = 63; /* 502-rmfd-reve max by experiment */
+ break;
+ default:
+ break;
+ }
+
+ rssi = rssi * 100 / max_rssi;
+ if ((rssi + old) % 2)
+ priv->wstats.qual.level = (rssi + old) / 2 + 1;
+ else
+ priv->wstats.qual.level = (rssi + old) / 2;
+ priv->wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
+ priv->wstats.qual.updated &= ~IW_QUAL_LEVEL_INVALID;
+}
+
+static void atmel_smooth_qual(struct atmel_private *priv)
+{
+ unsigned long time_diff = (jiffies - priv->last_qual) / HZ;
+ while (time_diff--) {
+ priv->last_qual += HZ;
+ priv->wstats.qual.qual = priv->wstats.qual.qual / 2;
+ priv->wstats.qual.qual +=
+ priv->beacons_this_sec * priv->beacon_period * (priv->wstats.qual.level + 100) / 4000;
+ priv->beacons_this_sec = 0;
+ }
+ priv->wstats.qual.updated |= IW_QUAL_QUAL_UPDATED;
+ priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID;
+}
+
+/* deals with incoming management frames. */
+static void atmel_management_frame(struct atmel_private *priv,
+ struct ieee80211_hdr *header,
+ u16 frame_len, u8 rssi)
+{
+ u16 subtype;
+
+ subtype = le16_to_cpu(header->frame_control) & IEEE80211_FCTL_STYPE;
+ switch (subtype) {
+ case IEEE80211_STYPE_BEACON:
+ case IEEE80211_STYPE_PROBE_RESP:
+
+ /* beacon frame has multiple variable-length fields -
+ never let an engineer loose with a data structure design. */
+ {
+ struct beacon_format {
+ __le64 timestamp;
+ __le16 interval;
+ __le16 capability;
+ u8 ssid_el_id;
+ u8 ssid_length;
+ /* ssid here */
+ u8 rates_el_id;
+ u8 rates_length;
+ /* rates here */
+ u8 ds_el_id;
+ u8 ds_length;
+ /* ds here */
+ } *beacon = (struct beacon_format *)priv->rx_buf;
+
+ u8 channel, rates_length, ssid_length;
+ u64 timestamp = le64_to_cpu(beacon->timestamp);
+ u16 beacon_interval = le16_to_cpu(beacon->interval);
+ u16 capability = le16_to_cpu(beacon->capability);
+ u8 *beaconp = priv->rx_buf;
+ ssid_length = beacon->ssid_length;
+ /* this blows chunks. */
+ if (frame_len < 14 || frame_len < ssid_length + 15)
+ return;
+ rates_length = beaconp[beacon->ssid_length + 15];
+ if (frame_len < ssid_length + rates_length + 18)
+ return;
+ if (ssid_length > MAX_SSID_LENGTH)
+ return;
+ channel = beaconp[ssid_length + rates_length + 18];
+
+ if (priv->station_state == STATION_STATE_READY) {
+ smooth_rssi(priv, rssi);
+ if (is_frame_from_current_bss(priv, header)) {
+ priv->beacons_this_sec++;
+ atmel_smooth_qual(priv);
+ if (priv->last_beacon_timestamp) {
+ /* Note truncate this to 32 bits - kernel can't divide a long */
+ u32 beacon_delay = timestamp - priv->last_beacon_timestamp;
+ int beacons = beacon_delay / (beacon_interval * 1000);
+ if (beacons > 1)
+ priv->wstats.miss.beacon += beacons - 1;
+ }
+ priv->last_beacon_timestamp = timestamp;
+ handle_beacon_probe(priv, capability, channel);
+ }
+ }
+
+ if (priv->station_state == STATION_STATE_SCANNING)
+ store_bss_info(priv, header, capability,
+ beacon_interval, channel, rssi,
+ ssid_length,
+ &beacon->rates_el_id,
+ subtype == IEEE80211_STYPE_BEACON);
+ }
+ break;
+
+ case IEEE80211_STYPE_AUTH:
+
+ if (priv->station_state == STATION_STATE_AUTHENTICATING)
+ authenticate(priv, frame_len);
+
+ break;
+
+ case IEEE80211_STYPE_ASSOC_RESP:
+ case IEEE80211_STYPE_REASSOC_RESP:
+
+ if (priv->station_state == STATION_STATE_ASSOCIATING ||
+ priv->station_state == STATION_STATE_REASSOCIATING)
+ associate(priv, frame_len, subtype);
+
+ break;
+
+ case IEEE80211_STYPE_DISASSOC:
+ if (priv->station_is_associated &&
+ priv->operating_mode == IW_MODE_INFRA &&
+ is_frame_from_current_bss(priv, header)) {
+ priv->station_was_associated = 0;
+ priv->station_is_associated = 0;
+
+ atmel_enter_state(priv, STATION_STATE_JOINNING);
+ join(priv, BSS_TYPE_INFRASTRUCTURE);
+ }
+
+ break;
+
+ case IEEE80211_STYPE_DEAUTH:
+ if (priv->operating_mode == IW_MODE_INFRA &&
+ is_frame_from_current_bss(priv, header)) {
+ priv->station_was_associated = 0;
+
+ atmel_enter_state(priv, STATION_STATE_JOINNING);
+ join(priv, BSS_TYPE_INFRASTRUCTURE);
+ }
+
+ break;
+ }
+}
+
+/* run when timer expires */
+static void atmel_management_timer(struct timer_list *t)
+{
+ struct atmel_private *priv = from_timer(priv, t, management_timer);
+ unsigned long flags;
+
+ /* Check if the card has been yanked. */
+ if (priv->card && priv->present_callback &&
+ !(*priv->present_callback)(priv->card))
+ return;
+
+ spin_lock_irqsave(&priv->irqlock, flags);
+
+ switch (priv->station_state) {
+
+ case STATION_STATE_AUTHENTICATING:
+ if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ priv->AuthenticationRequestRetryCnt = 0;
+ restart_search(priv);
+ } else {
+ int auth = WLAN_AUTH_OPEN;
+ priv->AuthenticationRequestRetryCnt++;
+ priv->CurrentAuthentTransactionSeqNum = 0x0001;
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ if (priv->wep_is_on && priv->exclude_unencrypted)
+ auth = WLAN_AUTH_SHARED_KEY;
+ send_authentication_request(priv, auth, NULL, 0);
+ }
+ break;
+
+ case STATION_STATE_ASSOCIATING:
+ if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ priv->AssociationRequestRetryCnt = 0;
+ restart_search(priv);
+ } else {
+ priv->AssociationRequestRetryCnt++;
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ send_association_request(priv, 0);
+ }
+ break;
+
+ case STATION_STATE_REASSOCIATING:
+ if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ priv->ReAssociationRequestRetryCnt = 0;
+ restart_search(priv);
+ } else {
+ priv->ReAssociationRequestRetryCnt++;
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ send_association_request(priv, 1);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+}
+
+static void atmel_command_irq(struct atmel_private *priv)
+{
+ u8 status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
+ u8 command = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET));
+ int fast_scan;
+ union iwreq_data wrqu;
+
+ if (status == CMD_STATUS_IDLE ||
+ status == CMD_STATUS_IN_PROGRESS)
+ return;
+
+ switch (command) {
+ case CMD_Start:
+ if (status == CMD_STATUS_COMPLETE) {
+ priv->station_was_associated = priv->station_is_associated;
+ atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
+ (u8 *)priv->CurrentBSSID, 6);
+ atmel_enter_state(priv, STATION_STATE_READY);
+ }
+ break;
+
+ case CMD_Scan:
+ fast_scan = priv->fast_scan;
+ priv->fast_scan = 0;
+
+ if (status != CMD_STATUS_COMPLETE) {
+ atmel_scan(priv, 1);
+ } else {
+ int bss_index = retrieve_bss(priv);
+ int notify_scan_complete = 1;
+ if (bss_index != -1) {
+ atmel_join_bss(priv, bss_index);
+ } else if (priv->operating_mode == IW_MODE_ADHOC &&
+ priv->SSID_size != 0) {
+ start(priv, BSS_TYPE_AD_HOC);
+ } else {
+ priv->fast_scan = !fast_scan;
+ atmel_scan(priv, 1);
+ notify_scan_complete = 0;
+ }
+ priv->site_survey_state = SITE_SURVEY_COMPLETED;
+ if (notify_scan_complete) {
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
+ }
+ }
+ break;
+
+ case CMD_SiteSurvey:
+ priv->fast_scan = 0;
+
+ if (status != CMD_STATUS_COMPLETE)
+ return;
+
+ priv->site_survey_state = SITE_SURVEY_COMPLETED;
+ if (priv->station_is_associated) {
+ atmel_enter_state(priv, STATION_STATE_READY);
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
+ } else {
+ atmel_scan(priv, 1);
+ }
+ break;
+
+ case CMD_Join:
+ if (status == CMD_STATUS_COMPLETE) {
+ if (priv->operating_mode == IW_MODE_ADHOC) {
+ priv->station_was_associated = priv->station_is_associated;
+ atmel_enter_state(priv, STATION_STATE_READY);
+ } else {
+ int auth = WLAN_AUTH_OPEN;
+ priv->AuthenticationRequestRetryCnt = 0;
+ atmel_enter_state(priv, STATION_STATE_AUTHENTICATING);
+
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ priv->CurrentAuthentTransactionSeqNum = 0x0001;
+ if (priv->wep_is_on && priv->exclude_unencrypted)
+ auth = WLAN_AUTH_SHARED_KEY;
+ send_authentication_request(priv, auth, NULL, 0);
+ }
+ return;
+ }
+
+ atmel_scan(priv, 1);
+ }
+}
+
+static int atmel_wakeup_firmware(struct atmel_private *priv)
+{
+ struct host_info_struct *iface = &priv->host_info;
+ u16 mr1, mr3;
+ int i;
+
+ if (priv->card_type == CARD_TYPE_SPI_FLASH)
+ atmel_set_gcr(priv->dev, GCR_REMAP);
+
+ /* wake up on-board processor */
+ atmel_clear_gcr(priv->dev, 0x0040);
+ atmel_write16(priv->dev, BSR, BSS_SRAM);
+
+ if (priv->card_type == CARD_TYPE_SPI_FLASH)
+ mdelay(100);
+
+ /* and wait for it */
+ for (i = LOOP_RETRY_LIMIT; i; i--) {
+ mr1 = atmel_read16(priv->dev, MR1);
+ mr3 = atmel_read16(priv->dev, MR3);
+
+ if (mr3 & MAC_BOOT_COMPLETE)
+ break;
+ if (mr1 & MAC_BOOT_COMPLETE &&
+ priv->bus_type == BUS_TYPE_PCCARD)
+ break;
+ }
+
+ if (i == 0) {
+ printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name);
+ return -EIO;
+ }
+
+ if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
+ printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
+ return -ENODEV;
+ }
+
+ /* now check for completion of MAC initialization through
+ the FunCtrl field of the IFACE, poll MR1 to detect completion of
+ MAC initialization, check completion status, set interrupt mask,
+ enables interrupts and calls Tx and Rx initialization functions */
+
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), FUNC_CTRL_INIT_COMPLETE);
+
+ for (i = LOOP_RETRY_LIMIT; i; i--) {
+ mr1 = atmel_read16(priv->dev, MR1);
+ mr3 = atmel_read16(priv->dev, MR3);
+
+ if (mr3 & MAC_INIT_COMPLETE)
+ break;
+ if (mr1 & MAC_INIT_COMPLETE &&
+ priv->bus_type == BUS_TYPE_PCCARD)
+ break;
+ }
+
+ if (i == 0) {
+ printk(KERN_ALERT "%s: MAC failed to initialise.\n",
+ priv->dev->name);
+ return -EIO;
+ }
+
+ /* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */
+ if ((mr3 & MAC_INIT_COMPLETE) &&
+ !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) {
+ printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name);
+ return -EIO;
+ }
+ if ((mr1 & MAC_INIT_COMPLETE) &&
+ !(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) {
+ printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name);
+ return -EIO;
+ }
+
+ atmel_copy_to_host(priv->dev, (unsigned char *)iface,
+ priv->host_info_base, sizeof(*iface));
+
+ iface->tx_buff_pos = le16_to_cpu(iface->tx_buff_pos);
+ iface->tx_buff_size = le16_to_cpu(iface->tx_buff_size);
+ iface->tx_desc_pos = le16_to_cpu(iface->tx_desc_pos);
+ iface->tx_desc_count = le16_to_cpu(iface->tx_desc_count);
+ iface->rx_buff_pos = le16_to_cpu(iface->rx_buff_pos);
+ iface->rx_buff_size = le16_to_cpu(iface->rx_buff_size);
+ iface->rx_desc_pos = le16_to_cpu(iface->rx_desc_pos);
+ iface->rx_desc_count = le16_to_cpu(iface->rx_desc_count);
+ iface->build_version = le16_to_cpu(iface->build_version);
+ iface->command_pos = le16_to_cpu(iface->command_pos);
+ iface->major_version = le16_to_cpu(iface->major_version);
+ iface->minor_version = le16_to_cpu(iface->minor_version);
+ iface->func_ctrl = le16_to_cpu(iface->func_ctrl);
+ iface->mac_status = le16_to_cpu(iface->mac_status);
+
+ return 0;
+}
+
+/* determine type of memory and MAC address */
+static int probe_atmel_card(struct net_device *dev)
+{
+ int rc = 0;
+ struct atmel_private *priv = netdev_priv(dev);
+ u8 addr[ETH_ALEN] = {};
+
+ /* reset pccard */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+
+ atmel_write16(dev, GCR, 0x0040);
+ msleep(500);
+
+ if (atmel_read16(dev, MR2) == 0) {
+ /* No stored firmware so load a small stub which just
+ tells us the MAC address */
+ int i;
+ priv->card_type = CARD_TYPE_EEPROM;
+ atmel_write16(dev, BSR, BSS_IRAM);
+ atmel_copy_to_card(dev, 0, mac_reader, sizeof(mac_reader));
+ atmel_set_gcr(dev, GCR_REMAP);
+ atmel_clear_gcr(priv->dev, 0x0040);
+ atmel_write16(dev, BSR, BSS_SRAM);
+ for (i = LOOP_RETRY_LIMIT; i; i--)
+ if (atmel_read16(dev, MR3) & MAC_BOOT_COMPLETE)
+ break;
+ if (i == 0) {
+ printk(KERN_ALERT "%s: MAC failed to boot MAC address reader.\n", dev->name);
+ } else {
+
+ atmel_copy_to_host(dev, addr, atmel_read16(dev, MR2), 6);
+ eth_hw_addr_set(dev, addr);
+ /* got address, now squash it again until the network
+ interface is opened */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+ atmel_write16(dev, GCR, 0x0040);
+ rc = 1;
+ }
+ } else if (atmel_read16(dev, MR4) == 0) {
+ /* Mac address easy in this case. */
+ priv->card_type = CARD_TYPE_PARALLEL_FLASH;
+ atmel_write16(dev, BSR, 1);
+ atmel_copy_to_host(dev, addr, 0xc000, 6);
+ eth_hw_addr_set(dev, addr);
+ atmel_write16(dev, BSR, 0x200);
+ rc = 1;
+ } else {
+ /* Standard firmware in flash, boot it up and ask
+ for the Mac Address */
+ priv->card_type = CARD_TYPE_SPI_FLASH;
+ if (atmel_wakeup_firmware(priv) == 0) {
+ atmel_get_mib(priv, Mac_Address_Mib_Type, 0, addr, 6);
+ eth_hw_addr_set(dev, addr);
+
+ /* got address, now squash it again until the network
+ interface is opened */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+ atmel_write16(dev, GCR, 0x0040);
+ rc = 1;
+ }
+ }
+
+ if (rc) {
+ if (dev->dev_addr[0] == 0xFF) {
+ static const u8 default_mac[] = {
+ 0x00, 0x04, 0x25, 0x00, 0x00, 0x00
+ };
+ printk(KERN_ALERT "%s: *** Invalid MAC address. UPGRADE Firmware ****\n", dev->name);
+ eth_hw_addr_set(dev, default_mac);
+ }
+ }
+
+ return rc;
+}
+
+/* Move the encyption information on the MIB structure.
+ This routine is for the pre-WPA firmware: later firmware has
+ a different format MIB and a different routine. */
+static void build_wep_mib(struct atmel_private *priv)
+{
+ struct { /* NB this is matched to the hardware, don't change. */
+ u8 wep_is_on;
+ u8 default_key; /* 0..3 */
+ u8 reserved;
+ u8 exclude_unencrypted;
+
+ u32 WEPICV_error_count;
+ u32 WEP_excluded_count;
+
+ u8 wep_keys[MAX_ENCRYPTION_KEYS][13];
+ u8 encryption_level; /* 0, 1, 2 */
+ u8 reserved2[3];
+ } mib;
+ int i;
+
+ mib.wep_is_on = priv->wep_is_on;
+ if (priv->wep_is_on) {
+ if (priv->wep_key_len[priv->default_key] > 5)
+ mib.encryption_level = 2;
+ else
+ mib.encryption_level = 1;
+ } else {
+ mib.encryption_level = 0;
+ }
+
+ mib.default_key = priv->default_key;
+ mib.exclude_unencrypted = priv->exclude_unencrypted;
+
+ for (i = 0; i < MAX_ENCRYPTION_KEYS; i++)
+ memcpy(mib.wep_keys[i], priv->wep_keys[i], 13);
+
+ atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib));
+}
+
+static void build_wpa_mib(struct atmel_private *priv)
+{
+ /* This is for the later (WPA enabled) firmware. */
+
+ struct { /* NB this is matched to the hardware, don't change. */
+ u8 cipher_default_key_value[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE];
+ u8 receiver_address[ETH_ALEN];
+ u8 wep_is_on;
+ u8 default_key; /* 0..3 */
+ u8 group_key;
+ u8 exclude_unencrypted;
+ u8 encryption_type;
+ u8 reserved;
+
+ u32 WEPICV_error_count;
+ u32 WEP_excluded_count;
+
+ u8 key_RSC[4][8];
+ } mib;
+
+ int i;
+
+ mib.wep_is_on = priv->wep_is_on;
+ mib.exclude_unencrypted = priv->exclude_unencrypted;
+ memcpy(mib.receiver_address, priv->CurrentBSSID, ETH_ALEN);
+
+ /* zero all the keys before adding in valid ones. */
+ memset(mib.cipher_default_key_value, 0, sizeof(mib.cipher_default_key_value));
+
+ if (priv->wep_is_on) {
+ /* There's a comment in the Atmel code to the effect that this
+ is only valid when still using WEP, it may need to be set to
+ something to use WPA */
+ memset(mib.key_RSC, 0, sizeof(mib.key_RSC));
+
+ mib.default_key = mib.group_key = 255;
+ for (i = 0; i < MAX_ENCRYPTION_KEYS; i++) {
+ if (priv->wep_key_len[i] > 0) {
+ memcpy(mib.cipher_default_key_value[i], priv->wep_keys[i], MAX_ENCRYPTION_KEY_SIZE);
+ if (i == priv->default_key) {
+ mib.default_key = i;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 7;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite;
+ } else {
+ mib.group_key = i;
+ priv->group_cipher_suite = priv->pairwise_cipher_suite;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 1;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite;
+ }
+ }
+ }
+ if (mib.default_key == 255)
+ mib.default_key = mib.group_key != 255 ? mib.group_key : 0;
+ if (mib.group_key == 255)
+ mib.group_key = mib.default_key;
+
+ }
+
+ atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib));
+}
+
+static int reset_atmel_card(struct net_device *dev)
+{
+ /* do everything necessary to wake up the hardware, including
+ waiting for the lightning strike and throwing the knife switch....
+
+ set all the Mib values which matter in the card to match
+ their settings in the atmel_private structure. Some of these
+ can be altered on the fly, but many (WEP, infrastructure or ad-hoc)
+ can only be changed by tearing down the world and coming back through
+ here.
+
+ This routine is also responsible for initialising some
+ hardware-specific fields in the atmel_private structure,
+ including a copy of the firmware's hostinfo structure
+ which is the route into the rest of the firmware datastructures. */
+
+ struct atmel_private *priv = netdev_priv(dev);
+ u8 configuration;
+ int old_state = priv->station_state;
+ int err = 0;
+
+ /* data to add to the firmware names, in priority order
+ this implemenents firmware versioning */
+
+ static char *firmware_modifier[] = {
+ "-wpa",
+ "",
+ NULL
+ };
+
+ /* reset pccard */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(priv->dev, GCR, 0x0060);
+
+ /* stop card , disable interrupts */
+ atmel_write16(priv->dev, GCR, 0x0040);
+
+ if (priv->card_type == CARD_TYPE_EEPROM) {
+ /* copy in firmware if needed */
+ const struct firmware *fw_entry = NULL;
+ const unsigned char *fw;
+ int len = priv->firmware_length;
+ if (!(fw = priv->firmware)) {
+ if (priv->firmware_type == ATMEL_FW_TYPE_NONE) {
+ if (strlen(priv->firmware_id) == 0) {
+ printk(KERN_INFO
+ "%s: card type is unknown: assuming at76c502 firmware is OK.\n",
+ dev->name);
+ printk(KERN_INFO
+ "%s: if not, use the firmware= module parameter.\n",
+ dev->name);
+ strcpy(priv->firmware_id, "atmel_at76c502.bin");
+ }
+ err = request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev);
+ if (err != 0) {
+ printk(KERN_ALERT
+ "%s: firmware %s is missing, cannot continue.\n",
+ dev->name, priv->firmware_id);
+ return err;
+ }
+ } else {
+ int fw_index = 0;
+ int success = 0;
+
+ /* get firmware filename entry based on firmware type ID */
+ while (fw_table[fw_index].fw_type != priv->firmware_type
+ && fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE)
+ fw_index++;
+
+ /* construct the actual firmware file name */
+ if (fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) {
+ int i;
+ for (i = 0; firmware_modifier[i]; i++) {
+ snprintf(priv->firmware_id, 32, "%s%s.%s", fw_table[fw_index].fw_file,
+ firmware_modifier[i], fw_table[fw_index].fw_file_ext);
+ priv->firmware_id[31] = '\0';
+ if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) == 0) {
+ success = 1;
+ break;
+ }
+ }
+ }
+ if (!success) {
+ printk(KERN_ALERT
+ "%s: firmware %s is missing, cannot start.\n",
+ dev->name, priv->firmware_id);
+ priv->firmware_id[0] = '\0';
+ return -ENOENT;
+ }
+ }
+
+ fw = fw_entry->data;
+ len = fw_entry->size;
+ }
+
+ if (len <= 0x6000) {
+ atmel_write16(priv->dev, BSR, BSS_IRAM);
+ atmel_copy_to_card(priv->dev, 0, fw, len);
+ atmel_set_gcr(priv->dev, GCR_REMAP);
+ } else {
+ /* Remap */
+ atmel_set_gcr(priv->dev, GCR_REMAP);
+ atmel_write16(priv->dev, BSR, BSS_IRAM);
+ atmel_copy_to_card(priv->dev, 0, fw, 0x6000);
+ atmel_write16(priv->dev, BSR, 0x2ff);
+ atmel_copy_to_card(priv->dev, 0x8000, &fw[0x6000], len - 0x6000);
+ }
+
+ release_firmware(fw_entry);
+ }
+
+ err = atmel_wakeup_firmware(priv);
+ if (err != 0)
+ return err;
+
+ /* Check the version and set the correct flag for wpa stuff,
+ old and new firmware is incompatible.
+ The pre-wpa 3com firmware reports major version 5,
+ the wpa 3com firmware is major version 4 and doesn't need
+ the 3com broken-ness filter. */
+ priv->use_wpa = (priv->host_info.major_version == 4);
+ priv->radio_on_broken = (priv->host_info.major_version == 5);
+
+ /* unmask all irq sources */
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_MASK_OFFSET), 0xff);
+
+ /* int Tx system and enable Tx */
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, 0), 0);
+ atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, 0), 0x80000000L);
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, 0), 0);
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, 0), 0);
+
+ priv->tx_desc_free = priv->host_info.tx_desc_count;
+ priv->tx_desc_head = 0;
+ priv->tx_desc_tail = 0;
+ priv->tx_desc_previous = 0;
+ priv->tx_free_mem = priv->host_info.tx_buff_size;
+ priv->tx_buff_head = 0;
+ priv->tx_buff_tail = 0;
+
+ configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
+ configuration | FUNC_CTRL_TxENABLE);
+
+ /* init Rx system and enable */
+ priv->rx_desc_head = 0;
+
+ configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
+ configuration | FUNC_CTRL_RxENABLE);
+
+ if (!priv->radio_on_broken) {
+ if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
+ CMD_STATUS_REJECTED_RADIO_OFF) {
+ printk(KERN_INFO "%s: cannot turn the radio on.\n",
+ dev->name);
+ return -EIO;
+ }
+ }
+
+ /* set up enough MIB values to run. */
+ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_AUTO_TX_RATE_POS, priv->auto_tx_rate);
+ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_TX_PROMISCUOUS_POS, PROM_MODE_OFF);
+ atmel_set_mib16(priv, Mac_Mib_Type, MAC_MIB_RTS_THRESHOLD_POS, priv->rts_threshold);
+ atmel_set_mib16(priv, Mac_Mib_Type, MAC_MIB_FRAG_THRESHOLD_POS, priv->frag_threshold);
+ atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_SHORT_RETRY_POS, priv->short_retry);
+ atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_LONG_RETRY_POS, priv->long_retry);
+ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, priv->preamble);
+ atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS,
+ priv->dev->dev_addr, 6);
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_BEACON_PER_POS, priv->default_beacon_period);
+ atmel_set_mib(priv, Phy_Mib_Type, PHY_MIB_RATE_SET_POS, atmel_basic_rates, 4);
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_PRIVACY_POS, priv->wep_is_on);
+ if (priv->use_wpa)
+ build_wpa_mib(priv);
+ else
+ build_wep_mib(priv);
+
+ if (old_state == STATION_STATE_READY) {
+ union iwreq_data wrqu;
+
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ eth_zero_addr(wrqu.ap_addr.sa_data);
+ wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+ }
+
+ return 0;
+}
+
+static void atmel_send_command(struct atmel_private *priv, int command,
+ void *cmd, int cmd_size)
+{
+ if (cmd)
+ atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET),
+ cmd, cmd_size);
+
+ atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET), command);
+ atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET), 0);
+}
+
+static int atmel_send_command_wait(struct atmel_private *priv, int command,
+ void *cmd, int cmd_size)
+{
+ int i, status;
+
+ atmel_send_command(priv, command, cmd, cmd_size);
+
+ for (i = 5000; i; i--) {
+ status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
+ if (status != CMD_STATUS_IDLE &&
+ status != CMD_STATUS_IN_PROGRESS)
+ break;
+ udelay(20);
+ }
+
+ if (i == 0) {
+ printk(KERN_ALERT "%s: failed to contact MAC.\n", priv->dev->name);
+ status = CMD_STATUS_HOST_ERROR;
+ } else {
+ if (command != CMD_EnableRadio)
+ status = CMD_STATUS_COMPLETE;
+ }
+
+ return status;
+}
+
+static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = 1;
+ m.index = index;
+
+ atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + 1);
+ return atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE));
+}
+
+static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 data)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = 1;
+ m.index = index;
+ m.data[0] = data;
+
+ atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 1);
+}
+
+static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index,
+ u16 data)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = 2;
+ m.index = index;
+ m.data[0] = data;
+ m.data[1] = data >> 8;
+
+ atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 2);
+}
+
+static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index,
+ const u8 *data, int data_len)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = data_len;
+ m.index = index;
+
+ if (data_len > MIB_MAX_DATA_BYTES)
+ printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name);
+
+ memcpy(m.data, data, data_len);
+ atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + data_len);
+}
+
+static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index,
+ u8 *data, int data_len)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = data_len;
+ m.index = index;
+
+ if (data_len > MIB_MAX_DATA_BYTES)
+ printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name);
+
+ atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + data_len);
+ atmel_copy_to_host(priv->dev, data,
+ atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE), data_len);
+}
+
+static void atmel_writeAR(struct net_device *dev, u16 data)
+{
+ int i;
+ outw(data, dev->base_addr + AR);
+ /* Address register appears to need some convincing..... */
+ for (i = 0; data != inw(dev->base_addr + AR) && i < 10; i++)
+ outw(data, dev->base_addr + AR);
+}
+
+static void atmel_copy_to_card(struct net_device *dev, u16 dest,
+ const unsigned char *src, u16 len)
+{
+ int i;
+ atmel_writeAR(dev, dest);
+ if (dest % 2) {
+ atmel_write8(dev, DR, *src);
+ src++; len--;
+ }
+ for (i = len; i > 1 ; i -= 2) {
+ u8 lb = *src++;
+ u8 hb = *src++;
+ atmel_write16(dev, DR, lb | (hb << 8));
+ }
+ if (i)
+ atmel_write8(dev, DR, *src);
+}
+
+static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest,
+ u16 src, u16 len)
+{
+ int i;
+ atmel_writeAR(dev, src);
+ if (src % 2) {
+ *dest = atmel_read8(dev, DR);
+ dest++; len--;
+ }
+ for (i = len; i > 1 ; i -= 2) {
+ u16 hw = atmel_read16(dev, DR);
+ *dest++ = hw;
+ *dest++ = hw >> 8;
+ }
+ if (i)
+ *dest = atmel_read8(dev, DR);
+}
+
+static void atmel_set_gcr(struct net_device *dev, u16 mask)
+{
+ outw(inw(dev->base_addr + GCR) | mask, dev->base_addr + GCR);
+}
+
+static void atmel_clear_gcr(struct net_device *dev, u16 mask)
+{
+ outw(inw(dev->base_addr + GCR) & ~mask, dev->base_addr + GCR);
+}
+
+static int atmel_lock_mac(struct atmel_private *priv)
+{
+ int i, j = 20;
+ retry:
+ for (i = 5000; i; i--) {
+ if (!atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET)))
+ break;
+ udelay(20);
+ }
+
+ if (!i)
+ return 0; /* timed out */
+
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 1);
+ if (atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET))) {
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
+ if (!j--)
+ return 0; /* timed out */
+ goto retry;
+ }
+
+ return 1;
+}
+
+static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data)
+{
+ atmel_writeAR(priv->dev, pos);
+ atmel_write16(priv->dev, DR, data); /* card is little-endian */
+ atmel_write16(priv->dev, DR, data >> 16);
+}
+
+/***************************************************************************/
+/* There follows the source form of the MAC address reading firmware */
+/***************************************************************************/
+#if 0
+
+/* Copyright 2003 Matthew T. Russotto */
+/* But derived from the Atmel 76C502 firmware written by Atmel and */
+/* included in "atmel wireless lan drivers" package */
+/*
+ This file is part of net.russotto.AtmelMACFW, hereto referred to
+ as AtmelMACFW
+
+ AtmelMACFW is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License version 2
+ as published by the Free Software Foundation.
+
+ AtmelMACFW is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with AtmelMACFW; if not, see <http://www.gnu.org/licenses/>.
+
+****************************************************************************/
+/* This firmware should work on the 76C502 RFMD, RFMD_D, and RFMD_E */
+/* It will probably work on the 76C504 and 76C502 RFMD_3COM */
+/* It only works on SPI EEPROM versions of the card. */
+
+/* This firmware initializes the SPI controller and clock, reads the MAC */
+/* address from the EEPROM into SRAM, and puts the SRAM offset of the MAC */
+/* address in MR2, and sets MR3 to 0x10 to indicate it is done */
+/* It also puts a complete copy of the EEPROM in SRAM with the offset in */
+/* MR4, for investigational purposes (maybe we can determine chip type */
+/* from that?) */
+
+ .org 0
+ .set MRBASE, 0x8000000
+ .set CPSR_INITIAL, 0xD3 /* IRQ/FIQ disabled, ARM mode, Supervisor state */
+ .set CPSR_USER, 0xD1 /* IRQ/FIQ disabled, ARM mode, USER state */
+ .set SRAM_BASE, 0x02000000
+ .set SP_BASE, 0x0F300000
+ .set UNK_BASE, 0x0F000000 /* Some internal device, but which one? */
+ .set SPI_CGEN_BASE, 0x0E000000 /* Some internal device, but which one? */
+ .set UNK3_BASE, 0x02014000 /* Some internal device, but which one? */
+ .set STACK_BASE, 0x5600
+ .set SP_SR, 0x10
+ .set SP_TDRE, 2 /* status register bit -- TDR empty */
+ .set SP_RDRF, 1 /* status register bit -- RDR full */
+ .set SP_SWRST, 0x80
+ .set SP_SPIEN, 0x1
+ .set SP_CR, 0 /* control register */
+ .set SP_MR, 4 /* mode register */
+ .set SP_RDR, 0x08 /* Read Data Register */
+ .set SP_TDR, 0x0C /* Transmit Data Register */
+ .set SP_CSR0, 0x30 /* chip select registers */
+ .set SP_CSR1, 0x34
+ .set SP_CSR2, 0x38
+ .set SP_CSR3, 0x3C
+ .set NVRAM_CMD_RDSR, 5 /* read status register */
+ .set NVRAM_CMD_READ, 3 /* read data */
+ .set NVRAM_SR_RDY, 1 /* RDY bit. This bit is inverted */
+ .set SPI_8CLOCKS, 0xFF /* Writing this to the TDR doesn't do anything to the
+ serial output, since SO is normally high. But it
+ does cause 8 clock cycles and thus 8 bits to be
+ clocked in to the chip. See Atmel's SPI
+ controller (e.g. AT91M55800) timing and 4K
+ SPI EEPROM manuals */
+
+ .set NVRAM_SCRATCH, 0x02000100 /* arbitrary area for scratchpad memory */
+ .set NVRAM_IMAGE, 0x02000200
+ .set NVRAM_LENGTH, 0x0200
+ .set MAC_ADDRESS_MIB, SRAM_BASE
+ .set MAC_ADDRESS_LENGTH, 6
+ .set MAC_BOOT_FLAG, 0x10
+ .set MR1, 0
+ .set MR2, 4
+ .set MR3, 8
+ .set MR4, 0xC
+RESET_VECTOR:
+ b RESET_HANDLER
+UNDEF_VECTOR:
+ b HALT1
+SWI_VECTOR:
+ b HALT1
+IABORT_VECTOR:
+ b HALT1
+DABORT_VECTOR:
+RESERVED_VECTOR:
+ b HALT1
+IRQ_VECTOR:
+ b HALT1
+FIQ_VECTOR:
+ b HALT1
+HALT1: b HALT1
+RESET_HANDLER:
+ mov r0, #CPSR_INITIAL
+ msr CPSR_c, r0 /* This is probably unnecessary */
+
+/* I'm guessing this is initializing clock generator electronics for SPI */
+ ldr r0, =SPI_CGEN_BASE
+ mov r1, #0
+ mov r1, r1, lsl #3
+ orr r1, r1, #0
+ str r1, [r0]
+ ldr r1, [r0, #28]
+ bic r1, r1, #16
+ str r1, [r0, #28]
+ mov r1, #1
+ str r1, [r0, #8]
+
+ ldr r0, =MRBASE
+ mov r1, #0
+ strh r1, [r0, #MR1]
+ strh r1, [r0, #MR2]
+ strh r1, [r0, #MR3]
+ strh r1, [r0, #MR4]
+
+ mov sp, #STACK_BASE
+ bl SP_INIT
+ mov r0, #10
+ bl DELAY9
+ bl GET_MAC_ADDR
+ bl GET_WHOLE_NVRAM
+ ldr r0, =MRBASE
+ ldr r1, =MAC_ADDRESS_MIB
+ strh r1, [r0, #MR2]
+ ldr r1, =NVRAM_IMAGE
+ strh r1, [r0, #MR4]
+ mov r1, #MAC_BOOT_FLAG
+ strh r1, [r0, #MR3]
+HALT2: b HALT2
+.func Get_Whole_NVRAM, GET_WHOLE_NVRAM
+GET_WHOLE_NVRAM:
+ stmdb sp!, {lr}
+ mov r2, #0 /* 0th bytes of NVRAM */
+ mov r3, #NVRAM_LENGTH
+ mov r1, #0 /* not used in routine */
+ ldr r0, =NVRAM_IMAGE
+ bl NVRAM_XFER
+ ldmia sp!, {lr}
+ bx lr
+.endfunc
+
+.func Get_MAC_Addr, GET_MAC_ADDR
+GET_MAC_ADDR:
+ stmdb sp!, {lr}
+ mov r2, #0x120 /* address of MAC Address within NVRAM */
+ mov r3, #MAC_ADDRESS_LENGTH
+ mov r1, #0 /* not used in routine */
+ ldr r0, =MAC_ADDRESS_MIB
+ bl NVRAM_XFER
+ ldmia sp!, {lr}
+ bx lr
+.endfunc
+.ltorg
+.func Delay9, DELAY9
+DELAY9:
+ adds r0, r0, r0, LSL #3 /* r0 = r0 * 9 */
+DELAYLOOP:
+ beq DELAY9_done
+ subs r0, r0, #1
+ b DELAYLOOP
+DELAY9_done:
+ bx lr
+.endfunc
+
+.func SP_Init, SP_INIT
+SP_INIT:
+ mov r1, #SP_SWRST
+ ldr r0, =SP_BASE
+ str r1, [r0, #SP_CR] /* reset the SPI */
+ mov r1, #0
+ str r1, [r0, #SP_CR] /* release SPI from reset state */
+ mov r1, #SP_SPIEN
+ str r1, [r0, #SP_MR] /* set the SPI to MASTER mode*/
+ str r1, [r0, #SP_CR] /* enable the SPI */
+
+/* My guess would be this turns on the SPI clock */
+ ldr r3, =SPI_CGEN_BASE
+ ldr r1, [r3, #28]
+ orr r1, r1, #0x2000
+ str r1, [r3, #28]
+
+ ldr r1, =0x2000c01
+ str r1, [r0, #SP_CSR0]
+ ldr r1, =0x2000201
+ str r1, [r0, #SP_CSR1]
+ str r1, [r0, #SP_CSR2]
+ str r1, [r0, #SP_CSR3]
+ ldr r1, [r0, #SP_SR]
+ ldr r0, [r0, #SP_RDR]
+ bx lr
+.endfunc
+.func NVRAM_Init, NVRAM_INIT
+NVRAM_INIT:
+ ldr r1, =SP_BASE
+ ldr r0, [r1, #SP_RDR]
+ mov r0, #NVRAM_CMD_RDSR
+ str r0, [r1, #SP_TDR]
+SP_loop1:
+ ldr r0, [r1, #SP_SR]
+ tst r0, #SP_TDRE
+ beq SP_loop1
+
+ mov r0, #SPI_8CLOCKS
+ str r0, [r1, #SP_TDR]
+SP_loop2:
+ ldr r0, [r1, #SP_SR]
+ tst r0, #SP_TDRE
+ beq SP_loop2
+
+ ldr r0, [r1, #SP_RDR]
+SP_loop3:
+ ldr r0, [r1, #SP_SR]
+ tst r0, #SP_RDRF
+ beq SP_loop3
+
+ ldr r0, [r1, #SP_RDR]
+ and r0, r0, #255
+ bx lr
+.endfunc
+
+.func NVRAM_Xfer, NVRAM_XFER
+ /* r0 = dest address */
+ /* r1 = not used */
+ /* r2 = src address within NVRAM */
+ /* r3 = length */
+NVRAM_XFER:
+ stmdb sp!, {r4, r5, lr}
+ mov r5, r0 /* save r0 (dest address) */
+ mov r4, r3 /* save r3 (length) */
+ mov r0, r2, LSR #5 /* SPI memories put A8 in the command field */
+ and r0, r0, #8
+ add r0, r0, #NVRAM_CMD_READ
+ ldr r1, =NVRAM_SCRATCH
+ strb r0, [r1, #0] /* save command in NVRAM_SCRATCH[0] */
+ strb r2, [r1, #1] /* save low byte of source address in NVRAM_SCRATCH[1] */
+_local1:
+ bl NVRAM_INIT
+ tst r0, #NVRAM_SR_RDY
+ bne _local1
+ mov r0, #20
+ bl DELAY9
+ mov r2, r4 /* length */
+ mov r1, r5 /* dest address */
+ mov r0, #2 /* bytes to transfer in command */
+ bl NVRAM_XFER2
+ ldmia sp!, {r4, r5, lr}
+ bx lr
+.endfunc
+
+.func NVRAM_Xfer2, NVRAM_XFER2
+NVRAM_XFER2:
+ stmdb sp!, {r4, r5, r6, lr}
+ ldr r4, =SP_BASE
+ mov r3, #0
+ cmp r0, #0
+ bls _local2
+ ldr r5, =NVRAM_SCRATCH
+_local4:
+ ldrb r6, [r5, r3]
+ str r6, [r4, #SP_TDR]
+_local3:
+ ldr r6, [r4, #SP_SR]
+ tst r6, #SP_TDRE
+ beq _local3
+ add r3, r3, #1
+ cmp r3, r0 /* r0 is # of bytes to send out (command+addr) */
+ blo _local4
+_local2:
+ mov r3, #SPI_8CLOCKS
+ str r3, [r4, #SP_TDR]
+ ldr r0, [r4, #SP_RDR]
+_local5:
+ ldr r0, [r4, #SP_SR]
+ tst r0, #SP_RDRF
+ beq _local5
+ ldr r0, [r4, #SP_RDR] /* what's this byte? It's the byte read while writing the TDR -- nonsense, because the NVRAM doesn't read and write at the same time */
+ mov r0, #0
+ cmp r2, #0 /* r2 is # of bytes to copy in */
+ bls _local6
+_local7:
+ ldr r5, [r4, #SP_SR]
+ tst r5, #SP_TDRE
+ beq _local7
+ str r3, [r4, #SP_TDR] /* r3 has SPI_8CLOCKS */
+_local8:
+ ldr r5, [r4, #SP_SR]
+ tst r5, #SP_RDRF
+ beq _local8
+ ldr r5, [r4, #SP_RDR] /* but didn't we read this byte above? */
+ strb r5, [r1], #1 /* postindexed */
+ add r0, r0, #1
+ cmp r0, r2
+ blo _local7 /* since we don't send another address, the NVRAM must be capable of sequential reads */
+_local6:
+ mov r0, #200
+ bl DELAY9
+ ldmia sp!, {r4, r5, r6, lr}
+ bx lr
+#endif
diff --git a/drivers/net/wireless/atmel/atmel.h b/drivers/net/wireless/atmel/atmel.h
new file mode 100644
index 0000000000..d2aa52cf6e
--- /dev/null
+++ b/drivers/net/wireless/atmel/atmel.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*** -*- linux-c -*- **********************************************************
+
+ Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+ Copyright 2005 Dan Williams and Red Hat, Inc.
+
+
+******************************************************************************/
+
+#ifndef _ATMEL_H
+#define _ATMEL_H
+
+typedef enum {
+ ATMEL_FW_TYPE_NONE = 0,
+ ATMEL_FW_TYPE_502,
+ ATMEL_FW_TYPE_502D,
+ ATMEL_FW_TYPE_502E,
+ ATMEL_FW_TYPE_502_3COM,
+ ATMEL_FW_TYPE_504,
+ ATMEL_FW_TYPE_504_2958,
+ ATMEL_FW_TYPE_504A_2958,
+ ATMEL_FW_TYPE_506
+} AtmelFWType;
+
+struct net_device *init_atmel_card(unsigned short, unsigned long, const AtmelFWType, struct device *,
+ int (*present_func)(void *), void * );
+void stop_atmel_card( struct net_device *);
+int atmel_open( struct net_device * );
+
+#endif
diff --git a/drivers/net/wireless/atmel/atmel_cs.c b/drivers/net/wireless/atmel/atmel_cs.c
new file mode 100644
index 0000000000..58bba9875d
--- /dev/null
+++ b/drivers/net/wireless/atmel/atmel_cs.c
@@ -0,0 +1,292 @@
+/*** -*- linux-c -*- **********************************************************
+
+ Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+ Copyright 2000-2001 ATMEL Corporation.
+ Copyright 2003 Simon Kelley.
+
+ This code was developed from version 2.1.1 of the Atmel drivers,
+ released by Atmel corp. under the GPL in December 2002. It also
+ includes code from the Linux aironet drivers (C) Benjamin Reed,
+ and the Linux PCMCIA package, (C) David Hinds.
+
+ For all queries about this code, please contact the current author,
+ Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Atmel wireless lan drivers; if not, see
+ <http://www.gnu.org/licenses/>.
+
+******************************************************************************/
+
+#ifdef __IN_PCMCIA_PACKAGE__
+#include <pcmcia/k_compat.h>
+#endif
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/ciscode.h>
+
+#include <asm/io.h>
+#include <linux/wireless.h>
+
+#include "atmel.h"
+
+
+/*====================================================================*/
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+
+/*====================================================================*/
+
+static int atmel_config(struct pcmcia_device *link);
+static void atmel_release(struct pcmcia_device *link);
+
+static void atmel_detach(struct pcmcia_device *p_dev);
+
+struct local_info {
+ struct net_device *eth_dev;
+};
+
+static int atmel_probe(struct pcmcia_device *p_dev)
+{
+ struct local_info *local;
+ int ret;
+
+ dev_dbg(&p_dev->dev, "atmel_attach()\n");
+
+ /* Allocate space for private device-specific data */
+ local = kzalloc(sizeof(*local), GFP_KERNEL);
+ if (!local)
+ return -ENOMEM;
+
+ p_dev->priv = local;
+
+ ret = atmel_config(p_dev);
+ if (ret)
+ goto err_free_priv;
+
+ return 0;
+
+err_free_priv:
+ kfree(p_dev->priv);
+ return ret;
+}
+
+static void atmel_detach(struct pcmcia_device *link)
+{
+ dev_dbg(&link->dev, "atmel_detach\n");
+
+ atmel_release(link);
+
+ kfree(link->priv);
+}
+
+/* Call-back function to interrogate PCMCIA-specific information
+ about the current existence of the card */
+static int card_present(void *arg)
+{
+ struct pcmcia_device *link = (struct pcmcia_device *)arg;
+
+ if (pcmcia_dev_present(link))
+ return 1;
+
+ return 0;
+}
+
+static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+ if (p_dev->config_index == 0)
+ return -EINVAL;
+
+ return pcmcia_request_io(p_dev);
+}
+
+static int atmel_config(struct pcmcia_device *link)
+{
+ int ret;
+ const struct pcmcia_device_id *did;
+
+ did = dev_get_drvdata(&link->dev);
+
+ dev_dbg(&link->dev, "atmel_config\n");
+
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+ CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
+ if (pcmcia_loop_config(link, atmel_config_check, NULL))
+ goto failed;
+
+ if (!link->irq) {
+ dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
+ goto failed;
+ }
+
+ ret = pcmcia_enable_device(link);
+ if (ret)
+ goto failed;
+
+ ((struct local_info *)link->priv)->eth_dev =
+ init_atmel_card(link->irq,
+ link->resource[0]->start,
+ did ? did->driver_info : ATMEL_FW_TYPE_NONE,
+ &link->dev,
+ card_present,
+ link);
+ if (!((struct local_info *)link->priv)->eth_dev)
+ goto failed;
+
+
+ return 0;
+
+ failed:
+ atmel_release(link);
+ return -ENODEV;
+}
+
+static void atmel_release(struct pcmcia_device *link)
+{
+ struct net_device *dev = ((struct local_info *)link->priv)->eth_dev;
+
+ dev_dbg(&link->dev, "atmel_release\n");
+
+ if (dev)
+ stop_atmel_card(dev);
+ ((struct local_info *)link->priv)->eth_dev = NULL;
+
+ pcmcia_disable_device(link);
+}
+
+static int atmel_suspend(struct pcmcia_device *link)
+{
+ struct local_info *local = link->priv;
+
+ netif_device_detach(local->eth_dev);
+
+ return 0;
+}
+
+static int atmel_resume(struct pcmcia_device *link)
+{
+ struct local_info *local = link->priv;
+
+ atmel_open(local->eth_dev);
+ netif_device_attach(local->eth_dev);
+
+ return 0;
+}
+
+/*====================================================================*/
+/* We use the driver_info field to store the correct firmware type for a card. */
+
+#define PCMCIA_DEVICE_MANF_CARD_INFO(manf, card, info) { \
+ .match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+ PCMCIA_DEV_ID_MATCH_CARD_ID, \
+ .manf_id = (manf), \
+ .card_id = (card), \
+ .driver_info = (kernel_ulong_t)(info), }
+
+#define PCMCIA_DEVICE_PROD_ID12_INFO(v1, v2, vh1, vh2, info) { \
+ .match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+ PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+ .prod_id = { (v1), (v2), NULL, NULL }, \
+ .prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+ .driver_info = (kernel_ulong_t)(info), }
+
+static const struct pcmcia_device_id atmel_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0620, ATMEL_FW_TYPE_502_3COM),
+ PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0696, ATMEL_FW_TYPE_502_3COM),
+ PCMCIA_DEVICE_MANF_CARD_INFO(0x01bf, 0x3302, ATMEL_FW_TYPE_502E),
+ PCMCIA_DEVICE_MANF_CARD_INFO(0xd601, 0x0007, ATMEL_FW_TYPE_502),
+ PCMCIA_DEVICE_PROD_ID12_INFO("11WAVE", "11WP611AL-E", 0x9eb2da1f, 0xc9a0d3f9, ATMEL_FW_TYPE_502E),
+ PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR", 0xabda4164, 0x41b37e1f, ATMEL_FW_TYPE_502),
+ PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_D", 0xabda4164, 0x3675d704, ATMEL_FW_TYPE_502D),
+ PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_E", 0xabda4164, 0x4172e792, ATMEL_FW_TYPE_502E),
+ PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504_R", 0xabda4164, 0x917f3d72, ATMEL_FW_TYPE_504_2958),
+ PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504", 0xabda4164, 0x5040670a, ATMEL_FW_TYPE_504),
+ PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504A", 0xabda4164, 0xe15ed87f, ATMEL_FW_TYPE_504A_2958),
+ PCMCIA_DEVICE_PROD_ID12_INFO("BT", "Voyager 1020 Laptop Adapter", 0xae49b86a, 0x1e957cd5, ATMEL_FW_TYPE_502),
+ PCMCIA_DEVICE_PROD_ID12_INFO("CNet", "CNWLC 11Mbps Wireless PC Card V-5", 0xbc477dde, 0x502fae6b, ATMEL_FW_TYPE_502E),
+ PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN PC Card", 0x5b878724, 0x122f1df6, ATMEL_FW_TYPE_502),
+ PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN Card S", 0x5b878724, 0x5fba533a, ATMEL_FW_TYPE_504_2958),
+ PCMCIA_DEVICE_PROD_ID12_INFO("OEM", "11Mbps Wireless LAN PC Card V-3", 0xfea54c90, 0x1c5b0f68, ATMEL_FW_TYPE_502),
+ PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W", 0xc4f8b18b, 0x30f38774, ATMEL_FW_TYPE_502D),
+ PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W-V2", 0xc4f8b18b, 0x172d1377, ATMEL_FW_TYPE_502),
+ PCMCIA_DEVICE_PROD_ID12_INFO("Wireless", "PC_CARD", 0xa407ecdd, 0x119f6314, ATMEL_FW_TYPE_502D),
+ PCMCIA_DEVICE_PROD_ID12_INFO("WLAN", "802.11b PC CARD", 0x575c516c, 0xb1f6dbc4, ATMEL_FW_TYPE_502D),
+ PCMCIA_DEVICE_PROD_ID12_INFO("LG", "LW2100N", 0xb474d43a, 0x6b1fec94, ATMEL_FW_TYPE_502E),
+ PCMCIA_DEVICE_NULL
+};
+
+MODULE_DEVICE_TABLE(pcmcia, atmel_ids);
+
+static struct pcmcia_driver atmel_driver = {
+ .owner = THIS_MODULE,
+ .name = "atmel_cs",
+ .probe = atmel_probe,
+ .remove = atmel_detach,
+ .id_table = atmel_ids,
+ .suspend = atmel_suspend,
+ .resume = atmel_resume,
+};
+module_pcmcia_driver(atmel_driver);
+
+/*
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ In addition:
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. The name of the author may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+*/
diff --git a/drivers/net/wireless/atmel/atmel_pci.c b/drivers/net/wireless/atmel/atmel_pci.c
new file mode 100644
index 0000000000..f428dc79d9
--- /dev/null
+++ b/drivers/net/wireless/atmel/atmel_pci.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*** -*- linux-c -*- **********************************************************
+
+ Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+ Copyright 2004 Simon Kelley.
+
+
+******************************************************************************/
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include "atmel.h"
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+
+static const struct pci_device_id card_ids[] = {
+ { 0x1114, 0x0506, PCI_ANY_ID, PCI_ANY_ID },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, card_ids);
+
+static int atmel_pci_probe(struct pci_dev *, const struct pci_device_id *);
+static void atmel_pci_remove(struct pci_dev *);
+
+static struct pci_driver atmel_driver = {
+ .name = "atmel",
+ .id_table = card_ids,
+ .probe = atmel_pci_probe,
+ .remove = atmel_pci_remove,
+};
+
+
+static int atmel_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pent)
+{
+ struct net_device *dev;
+
+ if (pci_enable_device(pdev))
+ return -ENODEV;
+
+ pci_set_master(pdev);
+
+ dev = init_atmel_card(pdev->irq, pdev->resource[1].start,
+ ATMEL_FW_TYPE_506,
+ &pdev->dev, NULL, NULL);
+ if (!dev) {
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
+
+ pci_set_drvdata(pdev, dev);
+ return 0;
+}
+
+static void atmel_pci_remove(struct pci_dev *pdev)
+{
+ stop_atmel_card(pci_get_drvdata(pdev));
+}
+
+module_pci_driver(atmel_driver);