Merging upstream version 6.8.9.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

55 files changed, 2 insertions, 31698 deletions

diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig
index bd6bf70ece..201b1534a9 100644
--- a/drivers/net/wireless/intersil/Kconfig
+++ b/drivers/net/wireless/intersil/Kconfig
@@ -12,8 +12,6 @@ config WLAN_VENDOR_INTERSIL
 
 if WLAN_VENDOR_INTERSIL
 
-source "drivers/net/wireless/intersil/hostap/Kconfig"
-source "drivers/net/wireless/intersil/orinoco/Kconfig"
 source "drivers/net/wireless/intersil/p54/Kconfig"
 
 endif # WLAN_VENDOR_INTERSIL
diff --git a/drivers/net/wireless/intersil/Makefile b/drivers/net/wireless/intersil/Makefile
index 65281d1b3d..27e9b2869d 100644
--- a/drivers/net/wireless/intersil/Makefile
+++ b/drivers/net/wireless/intersil/Makefile
@@ -1,4 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_HOSTAP)		+= hostap/
-obj-$(CONFIG_HERMES)		+= orinoco/
 obj-$(CONFIG_P54_COMMON)	+= p54/
diff --git a/drivers/net/wireless/intersil/hostap/Kconfig b/drivers/net/wireless/intersil/hostap/Kconfig
deleted file mode 100644
index 2edff8efbc..0000000000
--- a/drivers/net/wireless/intersil/hostap/Kconfig
+++ /dev/null
@@ -1,95 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config HOSTAP
-	tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)"
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	select CRYPTO
-	select CRYPTO_MICHAEL_MIC
-	select CRC32
-	select LIB80211
-	select LIB80211_CRYPT_WEP
-	select LIB80211_CRYPT_TKIP
-	select LIB80211_CRYPT_CCMP
-	help
-	Shared driver code for IEEE 802.11b wireless cards based on
-	Intersil Prism2/2.5/3 chipset. This driver supports so called
-	Host AP mode that allows the card to act as an IEEE 802.11
-	access point.
-
-	See <http://hostap.epitest.fi/> for more information about the
-	Host AP driver configuration and tools. This site includes
-	information and tools (hostapd and wpa_supplicant) for WPA/WPA2
-	support.
-
-	This option includes the base Host AP driver code that is shared by
-	different hardware models. You will also need to enable support for
-	PLX/PCI/CS version of the driver to actually use the driver.
-
-	The driver can be compiled as a module and it will be called
-	hostap.
-
-config HOSTAP_FIRMWARE
-	bool "Support downloading firmware images with Host AP driver"
-	depends on HOSTAP
-	help
-	Configure Host AP driver to include support for firmware image
-	download. This option by itself only enables downloading to the
-	volatile memory, i.e. the card RAM. This option is required to
-	support cards that don't have firmware in flash, such as D-Link
-	DWL-520 rev E and D-Link DWL-650 rev P.
-
-	Firmware image downloading needs a user space tool, prism2_srec.
-	It is available from http://hostap.epitest.fi/.
-
-config HOSTAP_FIRMWARE_NVRAM
-	bool "Support for non-volatile firmware download"
-	depends on HOSTAP_FIRMWARE
-	help
-	Allow Host AP driver to write firmware images to the non-volatile
-	card memory, i.e. flash memory that survives power cycling.
-	Enable this option if you want to be able to change card firmware
-	permanently.
-
-	Firmware image downloading needs a user space tool, prism2_srec.
-	It is available from http://hostap.epitest.fi/.
-
-config HOSTAP_PLX
-	tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
-	depends on PCI && HOSTAP && HAS_IOPORT
-	help
-	Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
-	PCI adaptors.
-
-	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
-	driver and its help text includes more information about the Host AP
-	driver.
-
-	The driver can be compiled as a module and will be named
-	hostap_plx.
-
-config HOSTAP_PCI
-	tristate "Host AP driver for Prism2.5 PCI adaptors"
-	depends on PCI && HOSTAP
-	help
-	Host AP driver's version for Prism2.5 PCI adaptors.
-
-	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
-	driver and its help text includes more information about the Host AP
-	driver.
-
-	The driver can be compiled as a module and will be named
-	hostap_pci.
-
-config HOSTAP_CS
-	tristate "Host AP driver for Prism2/2.5/3 PC Cards"
-	depends on PCMCIA && HOSTAP
-	help
-	Host AP driver's version for Prism2/2.5/3 PC Cards.
-
-	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
-	driver and its help text includes more information about the Host AP
-	driver.
-
-	The driver can be compiled as a module and will be named
-	hostap_cs.
diff --git a/drivers/net/wireless/intersil/hostap/Makefile b/drivers/net/wireless/intersil/hostap/Makefile
deleted file mode 100644
index ae3bb73b2d..0000000000
--- a/drivers/net/wireless/intersil/hostap/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-hostap-y := hostap_80211_rx.o hostap_80211_tx.o hostap_ap.o hostap_info.o \
-            hostap_ioctl.o hostap_main.o hostap_proc.o 
-obj-$(CONFIG_HOSTAP) += hostap.o
-
-obj-$(CONFIG_HOSTAP_CS) += hostap_cs.o
-obj-$(CONFIG_HOSTAP_PLX) += hostap_plx.o
-obj-$(CONFIG_HOSTAP_PCI) += hostap_pci.o
diff --git a/drivers/net/wireless/intersil/hostap/hostap.h b/drivers/net/wireless/intersil/hostap/hostap.h
deleted file mode 100644
index 552ae33d78..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_H
-#define HOSTAP_H
-
-#include <linux/ethtool.h>
-#include <linux/kernel.h>
-
-#include "hostap_wlan.h"
-#include "hostap_ap.h"
-
-static const long __maybe_unused freq_list[] = {
-	2412, 2417, 2422, 2427, 2432, 2437, 2442,
-	2447, 2452, 2457, 2462, 2467, 2472, 2484
-};
-#define FREQ_COUNT ARRAY_SIZE(freq_list)
-
-/* hostap.c */
-
-extern struct proc_dir_entry *hostap_proc;
-
-u16 hostap_tx_callback_register(local_info_t *local,
-				void (*func)(struct sk_buff *, int ok, void *),
-				void *data);
-int hostap_tx_callback_unregister(local_info_t *local, u16 idx);
-int hostap_set_word(struct net_device *dev, int rid, u16 val);
-int hostap_set_string(struct net_device *dev, int rid, const char *val);
-u16 hostap_get_porttype(local_info_t *local);
-int hostap_set_encryption(local_info_t *local);
-int hostap_set_antsel(local_info_t *local);
-int hostap_set_roaming(local_info_t *local);
-int hostap_set_auth_algs(local_info_t *local);
-void hostap_dump_rx_header(const char *name,
-			   const struct hfa384x_rx_frame *rx);
-void hostap_dump_tx_header(const char *name,
-			   const struct hfa384x_tx_frame *tx);
-extern const struct header_ops hostap_80211_ops;
-int hostap_80211_get_hdrlen(__le16 fc);
-struct net_device_stats *hostap_get_stats(struct net_device *dev);
-void hostap_setup_dev(struct net_device *dev, local_info_t *local,
-		      int type);
-void hostap_set_multicast_list_queue(struct work_struct *work);
-int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked);
-int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked);
-void hostap_cleanup(local_info_t *local);
-void hostap_cleanup_handler(void *data);
-struct net_device * hostap_add_interface(struct local_info *local,
-					 int type, int rtnl_locked,
-					 const char *prefix, const char *name);
-void hostap_remove_interface(struct net_device *dev, int rtnl_locked,
-			     int remove_from_list);
-int prism2_update_comms_qual(struct net_device *dev);
-int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype,
-			 u8 *body, size_t bodylen);
-int prism2_sta_deauth(local_info_t *local, u16 reason);
-int prism2_wds_add(local_info_t *local, u8 *remote_addr,
-		   int rtnl_locked);
-int prism2_wds_del(local_info_t *local, u8 *remote_addr,
-		   int rtnl_locked, int do_not_remove);
-
-
-/* hostap_ap.c */
-
-int ap_control_add_mac(struct mac_restrictions *mac_restrictions, u8 *mac);
-int ap_control_del_mac(struct mac_restrictions *mac_restrictions, u8 *mac);
-void ap_control_flush_macs(struct mac_restrictions *mac_restrictions);
-int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, u8 *mac);
-void ap_control_kickall(struct ap_data *ap);
-void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent,
-			 struct lib80211_crypt_data ***crypt);
-int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[],
-			   struct iw_quality qual[], int buf_size,
-			   int aplist);
-int prism2_ap_translate_scan(struct net_device *dev,
-			     struct iw_request_info *info, char *buffer);
-int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param);
-
-
-/* hostap_proc.c */
-
-void hostap_init_proc(local_info_t *local);
-void hostap_remove_proc(local_info_t *local);
-
-
-/* hostap_info.c */
-
-void hostap_info_init(local_info_t *local);
-void hostap_info_process(local_info_t *local, struct sk_buff *skb);
-
-
-/* hostap_ioctl.c */
-
-extern const struct iw_handler_def hostap_iw_handler_def;
-extern const struct ethtool_ops prism2_ethtool_ops;
-
-int hostap_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
-			  void __user *data, int cmd);
-
-#endif /* HOSTAP_H */
diff --git a/drivers/net/wireless/intersil/hostap/hostap_80211.h b/drivers/net/wireless/intersil/hostap/hostap_80211.h
deleted file mode 100644
index 1452cf6ecb..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_80211.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_80211_H
-#define HOSTAP_80211_H
-
-#include <linux/types.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-
-struct hostap_ieee80211_mgmt {
-	__le16 frame_control;
-	__le16 duration;
-	u8 da[6];
-	u8 sa[6];
-	u8 bssid[6];
-	__le16 seq_ctrl;
-	union {
-		struct {
-			__le16 auth_alg;
-			__le16 auth_transaction;
-			__le16 status_code;
-			/* possibly followed by Challenge text */
-			u8 variable[0];
-		} __packed auth;
-		struct {
-			__le16 reason_code;
-		} __packed deauth;
-		struct {
-			__le16 capab_info;
-			__le16 listen_interval;
-			/* followed by SSID and Supported rates */
-			u8 variable[0];
-		} __packed assoc_req;
-		struct {
-			__le16 capab_info;
-			__le16 status_code;
-			__le16 aid;
-			/* followed by Supported rates */
-			u8 variable[0];
-		} __packed assoc_resp, reassoc_resp;
-		struct {
-			__le16 capab_info;
-			__le16 listen_interval;
-			u8 current_ap[6];
-			/* followed by SSID and Supported rates */
-			u8 variable[0];
-		} __packed reassoc_req;
-		struct {
-			__le16 reason_code;
-		} __packed disassoc;
-		struct {
-		} __packed probe_req;
-		struct {
-			u8 timestamp[8];
-			__le16 beacon_int;
-			__le16 capab_info;
-			/* followed by some of SSID, Supported rates,
-			 * FH Params, DS Params, CF Params, IBSS Params, TIM */
-			u8 variable[0];
-		} __packed beacon, probe_resp;
-	} u;
-} __packed;
-
-
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-
-struct hostap_80211_rx_status {
-	u32 mac_time;
-	u8 signal;
-	u8 noise;
-	u16 rate; /* in 100 kbps */
-};
-
-/* prism2_rx_80211 'type' argument */
-enum {
-	PRISM2_RX_MONITOR, PRISM2_RX_MGMT, PRISM2_RX_NON_ASSOC,
-	PRISM2_RX_NULLFUNC_ACK
-};
-
-int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb,
-		    struct hostap_80211_rx_status *rx_stats, int type);
-void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb,
-		     struct hostap_80211_rx_status *rx_stats);
-void hostap_dump_rx_80211(const char *name, struct sk_buff *skb,
-			  struct hostap_80211_rx_status *rx_stats);
-
-void hostap_dump_tx_80211(const char *name, struct sk_buff *skb);
-netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb,
-				   struct net_device *dev);
-netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb,
-				   struct net_device *dev);
-netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb,
-				     struct net_device *dev);
-
-#endif /* HOSTAP_80211_H */
diff --git a/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c b/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c
deleted file mode 100644
index 61be822f90..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c
+++ /dev/null
@@ -1,1116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/etherdevice.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <net/lib80211.h>
-#include <linux/if_arp.h>
-
-#include "hostap_80211.h"
-#include "hostap.h"
-#include "hostap_ap.h"
-
-/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
-/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-static unsigned char rfc1042_header[] =
-{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
-/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-static unsigned char bridge_tunnel_header[] =
-{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
-/* No encapsulation header if EtherType < 0x600 (=length) */
-
-void hostap_dump_rx_80211(const char *name, struct sk_buff *skb,
-			  struct hostap_80211_rx_status *rx_stats)
-{
-	struct ieee80211_hdr *hdr;
-	u16 fc;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-
-	printk(KERN_DEBUG "%s: RX signal=%d noise=%d rate=%d len=%d "
-	       "jiffies=%ld\n",
-	       name, rx_stats->signal, rx_stats->noise, rx_stats->rate,
-	       skb->len, jiffies);
-
-	if (skb->len < 2)
-		return;
-
-	fc = le16_to_cpu(hdr->frame_control);
-	printk(KERN_DEBUG "   FC=0x%04x (type=%d:%d)%s%s",
-	       fc, (fc & IEEE80211_FCTL_FTYPE) >> 2,
-	       (fc & IEEE80211_FCTL_STYPE) >> 4,
-	       fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "",
-	       fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : "");
-
-	if (skb->len < IEEE80211_DATA_HDR3_LEN) {
-		printk("\n");
-		return;
-	}
-
-	printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id),
-	       le16_to_cpu(hdr->seq_ctrl));
-
-	printk(KERN_DEBUG "   A1=%pM", hdr->addr1);
-	printk(" A2=%pM", hdr->addr2);
-	printk(" A3=%pM", hdr->addr3);
-	if (skb->len >= 30)
-		printk(" A4=%pM", hdr->addr4);
-	printk("\n");
-}
-
-
-/* Send RX frame to netif with 802.11 (and possible prism) header.
- * Called from hardware or software IRQ context. */
-int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb,
-		    struct hostap_80211_rx_status *rx_stats, int type)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int hdrlen, phdrlen, head_need, tail_need;
-	u16 fc;
-	int prism_header, ret;
-	struct ieee80211_hdr *fhdr;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (dev->type == ARPHRD_IEEE80211_PRISM) {
-		if (local->monitor_type == PRISM2_MONITOR_PRISM) {
-			prism_header = 1;
-			phdrlen = sizeof(struct linux_wlan_ng_prism_hdr);
-		} else { /* local->monitor_type == PRISM2_MONITOR_CAPHDR */
-			prism_header = 2;
-			phdrlen = sizeof(struct linux_wlan_ng_cap_hdr);
-		}
-	} else if (dev->type == ARPHRD_IEEE80211_RADIOTAP) {
-		prism_header = 3;
-		phdrlen = sizeof(struct hostap_radiotap_rx);
-	} else {
-		prism_header = 0;
-		phdrlen = 0;
-	}
-
-	fhdr = (struct ieee80211_hdr *) skb->data;
-	fc = le16_to_cpu(fhdr->frame_control);
-
-	if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) {
-		printk(KERN_DEBUG "%s: dropped management frame with header "
-		       "version %d\n", dev->name, fc & IEEE80211_FCTL_VERS);
-		dev_kfree_skb_any(skb);
-		return 0;
-	}
-
-	hdrlen = hostap_80211_get_hdrlen(fhdr->frame_control);
-
-	/* check if there is enough room for extra data; if not, expand skb
-	 * buffer to be large enough for the changes */
-	head_need = phdrlen;
-	tail_need = 0;
-#ifdef PRISM2_ADD_BOGUS_CRC
-	tail_need += 4;
-#endif /* PRISM2_ADD_BOGUS_CRC */
-
-	head_need -= skb_headroom(skb);
-	tail_need -= skb_tailroom(skb);
-
-	if (head_need > 0 || tail_need > 0) {
-		if (pskb_expand_head(skb, head_need > 0 ? head_need : 0,
-				     tail_need > 0 ? tail_need : 0,
-				     GFP_ATOMIC)) {
-			printk(KERN_DEBUG "%s: prism2_rx_80211 failed to "
-			       "reallocate skb buffer\n", dev->name);
-			dev_kfree_skb_any(skb);
-			return 0;
-		}
-	}
-
-	/* We now have an skb with enough head and tail room, so just insert
-	 * the extra data */
-
-#ifdef PRISM2_ADD_BOGUS_CRC
-	memset(skb_put(skb, 4), 0xff, 4); /* Prism2 strips CRC */
-#endif /* PRISM2_ADD_BOGUS_CRC */
-
-	if (prism_header == 1) {
-		struct linux_wlan_ng_prism_hdr *hdr;
-		hdr = skb_push(skb, phdrlen);
-		memset(hdr, 0, phdrlen);
-		hdr->msgcode = LWNG_CAP_DID_BASE;
-		hdr->msglen = sizeof(*hdr);
-		memcpy(hdr->devname, dev->name, sizeof(hdr->devname));
-#define LWNG_SETVAL(f,i,s,l,d) \
-hdr->f.did = LWNG_CAP_DID_BASE | (i << 12); \
-hdr->f.status = s; hdr->f.len = l; hdr->f.data = d
-		LWNG_SETVAL(hosttime, 1, 0, 4, jiffies);
-		LWNG_SETVAL(mactime, 2, 0, 4, rx_stats->mac_time);
-		LWNG_SETVAL(channel, 3, 1 /* no value */, 4, 0);
-		LWNG_SETVAL(rssi, 4, 1 /* no value */, 4, 0);
-		LWNG_SETVAL(sq, 5, 1 /* no value */, 4, 0);
-		LWNG_SETVAL(signal, 6, 0, 4, rx_stats->signal);
-		LWNG_SETVAL(noise, 7, 0, 4, rx_stats->noise);
-		LWNG_SETVAL(rate, 8, 0, 4, rx_stats->rate / 5);
-		LWNG_SETVAL(istx, 9, 0, 4, 0);
-		LWNG_SETVAL(frmlen, 10, 0, 4, skb->len - phdrlen);
-#undef LWNG_SETVAL
-	} else if (prism_header == 2) {
-		struct linux_wlan_ng_cap_hdr *hdr;
-		hdr = skb_push(skb, phdrlen);
-		memset(hdr, 0, phdrlen);
-		hdr->version    = htonl(LWNG_CAPHDR_VERSION);
-		hdr->length     = htonl(phdrlen);
-		hdr->mactime    = __cpu_to_be64(rx_stats->mac_time);
-		hdr->hosttime   = __cpu_to_be64(jiffies);
-		hdr->phytype    = htonl(4); /* dss_dot11_b */
-		hdr->channel    = htonl(local->channel);
-		hdr->datarate   = htonl(rx_stats->rate);
-		hdr->antenna    = htonl(0); /* unknown */
-		hdr->priority   = htonl(0); /* unknown */
-		hdr->ssi_type   = htonl(3); /* raw */
-		hdr->ssi_signal = htonl(rx_stats->signal);
-		hdr->ssi_noise  = htonl(rx_stats->noise);
-		hdr->preamble   = htonl(0); /* unknown */
-		hdr->encoding   = htonl(1); /* cck */
-	} else if (prism_header == 3) {
-		struct hostap_radiotap_rx *hdr;
-		hdr = skb_push(skb, phdrlen);
-		memset(hdr, 0, phdrlen);
-		hdr->hdr.it_len = cpu_to_le16(phdrlen);
-		hdr->hdr.it_present =
-			cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) |
-				    (1 << IEEE80211_RADIOTAP_CHANNEL) |
-				    (1 << IEEE80211_RADIOTAP_RATE) |
-				    (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) |
-				    (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE));
-		hdr->tsft = cpu_to_le64(rx_stats->mac_time);
-		hdr->chan_freq = cpu_to_le16(freq_list[local->channel - 1]);
-		hdr->chan_flags = cpu_to_le16(IEEE80211_CHAN_CCK |
-						 IEEE80211_CHAN_2GHZ);
-		hdr->rate = rx_stats->rate / 5;
-		hdr->dbm_antsignal = rx_stats->signal;
-		hdr->dbm_antnoise = rx_stats->noise;
-	}
-
-	ret = skb->len - phdrlen;
-	skb->dev = dev;
-	skb_reset_mac_header(skb);
-	skb_pull(skb, hdrlen);
-	if (prism_header)
-		skb_pull(skb, phdrlen);
-	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = cpu_to_be16(ETH_P_802_2);
-	memset(skb->cb, 0, sizeof(skb->cb));
-	netif_rx(skb);
-
-	return ret;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void monitor_rx(struct net_device *dev, struct sk_buff *skb,
-		       struct hostap_80211_rx_status *rx_stats)
-{
-	int len;
-
-	len = prism2_rx_80211(dev, skb, rx_stats, PRISM2_RX_MONITOR);
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += len;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static struct prism2_frag_entry *
-prism2_frag_cache_find(local_info_t *local, unsigned int seq,
-		       unsigned int frag, u8 *src, u8 *dst)
-{
-	struct prism2_frag_entry *entry;
-	int i;
-
-	for (i = 0; i < PRISM2_FRAG_CACHE_LEN; i++) {
-		entry = &local->frag_cache[i];
-		if (entry->skb != NULL &&
-		    time_after(jiffies, entry->first_frag_time + 2 * HZ)) {
-			printk(KERN_DEBUG "%s: expiring fragment cache entry "
-			       "seq=%u last_frag=%u\n",
-			       local->dev->name, entry->seq, entry->last_frag);
-			dev_kfree_skb(entry->skb);
-			entry->skb = NULL;
-		}
-
-		if (entry->skb != NULL && entry->seq == seq &&
-		    (entry->last_frag + 1 == frag || frag == -1) &&
-		    memcmp(entry->src_addr, src, ETH_ALEN) == 0 &&
-		    memcmp(entry->dst_addr, dst, ETH_ALEN) == 0)
-			return entry;
-	}
-
-	return NULL;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static struct sk_buff *
-prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr)
-{
-	struct sk_buff *skb = NULL;
-	u16 sc;
-	unsigned int frag, seq;
-	struct prism2_frag_entry *entry;
-
-	sc = le16_to_cpu(hdr->seq_ctrl);
-	frag = sc & IEEE80211_SCTL_FRAG;
-	seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
-
-	if (frag == 0) {
-		/* Reserve enough space to fit maximum frame length */
-		skb = dev_alloc_skb(local->dev->mtu +
-				    sizeof(struct ieee80211_hdr) +
-				    8 /* LLC */ +
-				    2 /* alignment */ +
-				    8 /* WEP */ + ETH_ALEN /* WDS */);
-		if (skb == NULL)
-			return NULL;
-
-		entry = &local->frag_cache[local->frag_next_idx];
-		local->frag_next_idx++;
-		if (local->frag_next_idx >= PRISM2_FRAG_CACHE_LEN)
-			local->frag_next_idx = 0;
-
-		if (entry->skb != NULL)
-			dev_kfree_skb(entry->skb);
-
-		entry->first_frag_time = jiffies;
-		entry->seq = seq;
-		entry->last_frag = frag;
-		entry->skb = skb;
-		memcpy(entry->src_addr, hdr->addr2, ETH_ALEN);
-		memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN);
-	} else {
-		/* received a fragment of a frame for which the head fragment
-		 * should have already been received */
-		entry = prism2_frag_cache_find(local, seq, frag, hdr->addr2,
-					       hdr->addr1);
-		if (entry != NULL) {
-			entry->last_frag = frag;
-			skb = entry->skb;
-		}
-	}
-
-	return skb;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static int prism2_frag_cache_invalidate(local_info_t *local,
-					struct ieee80211_hdr *hdr)
-{
-	u16 sc;
-	unsigned int seq;
-	struct prism2_frag_entry *entry;
-
-	sc = le16_to_cpu(hdr->seq_ctrl);
-	seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
-
-	entry = prism2_frag_cache_find(local, seq, -1, hdr->addr2, hdr->addr1);
-
-	if (entry == NULL) {
-		printk(KERN_DEBUG "%s: could not invalidate fragment cache "
-		       "entry (seq=%u)\n",
-		       local->dev->name, seq);
-		return -1;
-	}
-
-	entry->skb = NULL;
-	return 0;
-}
-
-
-static struct hostap_bss_info *__hostap_get_bss(local_info_t *local, u8 *bssid,
-						u8 *ssid, size_t ssid_len)
-{
-	struct list_head *ptr;
-	struct hostap_bss_info *bss;
-
-	list_for_each(ptr, &local->bss_list) {
-		bss = list_entry(ptr, struct hostap_bss_info, list);
-		if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0 &&
-		    (ssid == NULL ||
-		     (ssid_len == bss->ssid_len &&
-		      memcmp(ssid, bss->ssid, ssid_len) == 0))) {
-			list_move(&bss->list, &local->bss_list);
-			return bss;
-		}
-	}
-
-	return NULL;
-}
-
-
-static struct hostap_bss_info *__hostap_add_bss(local_info_t *local, u8 *bssid,
-						u8 *ssid, size_t ssid_len)
-{
-	struct hostap_bss_info *bss;
-
-	if (local->num_bss_info >= HOSTAP_MAX_BSS_COUNT) {
-		bss = list_entry(local->bss_list.prev,
-				 struct hostap_bss_info, list);
-		list_del(&bss->list);
-		local->num_bss_info--;
-	} else {
-		bss = kmalloc(sizeof(*bss), GFP_ATOMIC);
-		if (bss == NULL)
-			return NULL;
-	}
-
-	memset(bss, 0, sizeof(*bss));
-	memcpy(bss->bssid, bssid, ETH_ALEN);
-	memcpy(bss->ssid, ssid, ssid_len);
-	bss->ssid_len = ssid_len;
-	local->num_bss_info++;
-	list_add(&bss->list, &local->bss_list);
-	return bss;
-}
-
-
-static void __hostap_expire_bss(local_info_t *local)
-{
-	struct hostap_bss_info *bss;
-
-	while (local->num_bss_info > 0) {
-		bss = list_entry(local->bss_list.prev,
-				 struct hostap_bss_info, list);
-		if (!time_after(jiffies, bss->last_update + 60 * HZ))
-			break;
-
-		list_del(&bss->list);
-		local->num_bss_info--;
-		kfree(bss);
-	}
-}
-
-
-/* Both IEEE 802.11 Beacon and Probe Response frames have similar structure, so
- * the same routine can be used to parse both of them. */
-static void hostap_rx_sta_beacon(local_info_t *local, struct sk_buff *skb,
-				 int stype)
-{
-	struct hostap_ieee80211_mgmt *mgmt;
-	int left, chan = 0;
-	u8 *pos;
-	u8 *ssid = NULL, *wpa = NULL, *rsn = NULL;
-	size_t ssid_len = 0, wpa_len = 0, rsn_len = 0;
-	struct hostap_bss_info *bss;
-
-	if (skb->len < IEEE80211_MGMT_HDR_LEN + sizeof(mgmt->u.beacon))
-		return;
-
-	mgmt = (struct hostap_ieee80211_mgmt *) skb->data;
-	pos = mgmt->u.beacon.variable;
-	left = skb->len - (pos - skb->data);
-
-	while (left >= 2) {
-		if (2 + pos[1] > left)
-			return; /* parse failed */
-		switch (*pos) {
-		case WLAN_EID_SSID:
-			ssid = pos + 2;
-			ssid_len = pos[1];
-			break;
-		case WLAN_EID_VENDOR_SPECIFIC:
-			if (pos[1] >= 4 &&
-			    pos[2] == 0x00 && pos[3] == 0x50 &&
-			    pos[4] == 0xf2 && pos[5] == 1) {
-				wpa = pos;
-				wpa_len = pos[1] + 2;
-			}
-			break;
-		case WLAN_EID_RSN:
-			rsn = pos;
-			rsn_len = pos[1] + 2;
-			break;
-		case WLAN_EID_DS_PARAMS:
-			if (pos[1] >= 1)
-				chan = pos[2];
-			break;
-		}
-		left -= 2 + pos[1];
-		pos += 2 + pos[1];
-	}
-
-	if (wpa_len > MAX_WPA_IE_LEN)
-		wpa_len = MAX_WPA_IE_LEN;
-	if (rsn_len > MAX_WPA_IE_LEN)
-		rsn_len = MAX_WPA_IE_LEN;
-	if (ssid_len > sizeof(bss->ssid))
-		ssid_len = sizeof(bss->ssid);
-
-	spin_lock(&local->lock);
-	bss = __hostap_get_bss(local, mgmt->bssid, ssid, ssid_len);
-	if (bss == NULL)
-		bss = __hostap_add_bss(local, mgmt->bssid, ssid, ssid_len);
-	if (bss) {
-		bss->last_update = jiffies;
-		bss->count++;
-		bss->capab_info = le16_to_cpu(mgmt->u.beacon.capab_info);
-		if (wpa) {
-			memcpy(bss->wpa_ie, wpa, wpa_len);
-			bss->wpa_ie_len = wpa_len;
-		} else
-			bss->wpa_ie_len = 0;
-		if (rsn) {
-			memcpy(bss->rsn_ie, rsn, rsn_len);
-			bss->rsn_ie_len = rsn_len;
-		} else
-			bss->rsn_ie_len = 0;
-		bss->chan = chan;
-	}
-	__hostap_expire_bss(local);
-	spin_unlock(&local->lock);
-}
-
-
-static int
-hostap_rx_frame_mgmt(local_info_t *local, struct sk_buff *skb,
-		     struct hostap_80211_rx_status *rx_stats, u16 type,
-		     u16 stype)
-{
-	if (local->iw_mode == IW_MODE_MASTER)
-		hostap_update_sta_ps(local, (struct ieee80211_hdr *) skb->data);
-
-	if (local->hostapd && type == IEEE80211_FTYPE_MGMT) {
-		if (stype == IEEE80211_STYPE_BEACON &&
-		    local->iw_mode == IW_MODE_MASTER) {
-			struct sk_buff *skb2;
-			/* Process beacon frames also in kernel driver to
-			 * update STA(AP) table statistics */
-			skb2 = skb_clone(skb, GFP_ATOMIC);
-			if (skb2)
-				hostap_rx(skb2->dev, skb2, rx_stats);
-		}
-
-		/* send management frames to the user space daemon for
-		 * processing */
-		local->apdevstats.rx_packets++;
-		local->apdevstats.rx_bytes += skb->len;
-		if (local->apdev == NULL)
-			return -1;
-		prism2_rx_80211(local->apdev, skb, rx_stats, PRISM2_RX_MGMT);
-		return 0;
-	}
-
-	if (local->iw_mode == IW_MODE_MASTER) {
-		if (type != IEEE80211_FTYPE_MGMT &&
-		    type != IEEE80211_FTYPE_CTL) {
-			printk(KERN_DEBUG "%s: unknown management frame "
-			       "(type=0x%02x, stype=0x%02x) dropped\n",
-			       skb->dev->name, type >> 2, stype >> 4);
-			return -1;
-		}
-
-		hostap_rx(skb->dev, skb, rx_stats);
-		return 0;
-	} else if (type == IEEE80211_FTYPE_MGMT &&
-		   (stype == IEEE80211_STYPE_BEACON ||
-		    stype == IEEE80211_STYPE_PROBE_RESP)) {
-		hostap_rx_sta_beacon(local, skb, stype);
-		return -1;
-	} else if (type == IEEE80211_FTYPE_MGMT &&
-		   (stype == IEEE80211_STYPE_ASSOC_RESP ||
-		    stype == IEEE80211_STYPE_REASSOC_RESP)) {
-		/* Ignore (Re)AssocResp silently since these are not currently
-		 * needed but are still received when WPA/RSN mode is enabled.
-		 */
-		return -1;
-	} else {
-		printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: dropped unhandled"
-		       " management frame in non-Host AP mode (type=%d:%d)\n",
-		       skb->dev->name, type >> 2, stype >> 4);
-		return -1;
-	}
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static struct net_device *prism2_rx_get_wds(local_info_t *local,
-						   u8 *addr)
-{
-	struct hostap_interface *iface = NULL;
-	struct list_head *ptr;
-
-	read_lock_bh(&local->iface_lock);
-	list_for_each(ptr, &local->hostap_interfaces) {
-		iface = list_entry(ptr, struct hostap_interface, list);
-		if (iface->type == HOSTAP_INTERFACE_WDS &&
-		    memcmp(iface->u.wds.remote_addr, addr, ETH_ALEN) == 0)
-			break;
-		iface = NULL;
-	}
-	read_unlock_bh(&local->iface_lock);
-
-	return iface ? iface->dev : NULL;
-}
-
-
-static int
-hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr *hdr, u16 fc,
-		    struct net_device **wds)
-{
-	/* FIX: is this really supposed to accept WDS frames only in Master
-	 * mode? What about Repeater or Managed with WDS frames? */
-	if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) !=
-	    (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS) &&
-	    (local->iw_mode != IW_MODE_MASTER || !(fc & IEEE80211_FCTL_TODS)))
-		return 0; /* not a WDS frame */
-
-	/* Possible WDS frame: either IEEE 802.11 compliant (if FromDS)
-	 * or own non-standard frame with 4th address after payload */
-	if (!ether_addr_equal(hdr->addr1, local->dev->dev_addr) &&
-	    (hdr->addr1[0] != 0xff || hdr->addr1[1] != 0xff ||
-	     hdr->addr1[2] != 0xff || hdr->addr1[3] != 0xff ||
-	     hdr->addr1[4] != 0xff || hdr->addr1[5] != 0xff)) {
-		/* RA (or BSSID) is not ours - drop */
-		PDEBUG(DEBUG_EXTRA2, "%s: received WDS frame with "
-		       "not own or broadcast %s=%pM\n",
-		       local->dev->name,
-		       fc & IEEE80211_FCTL_FROMDS ? "RA" : "BSSID",
-		       hdr->addr1);
-		return -1;
-	}
-
-	/* check if the frame came from a registered WDS connection */
-	*wds = prism2_rx_get_wds(local, hdr->addr2);
-	if (*wds == NULL && fc & IEEE80211_FCTL_FROMDS &&
-	    (local->iw_mode != IW_MODE_INFRA ||
-	     !(local->wds_type & HOSTAP_WDS_AP_CLIENT) ||
-	     memcmp(hdr->addr2, local->bssid, ETH_ALEN) != 0)) {
-		/* require that WDS link has been registered with TA or the
-		 * frame is from current AP when using 'AP client mode' */
-		PDEBUG(DEBUG_EXTRA, "%s: received WDS[4 addr] frame "
-		       "from unknown TA=%pM\n",
-		       local->dev->name, hdr->addr2);
-		if (local->ap && local->ap->autom_ap_wds)
-			hostap_wds_link_oper(local, hdr->addr2, WDS_ADD);
-		return -1;
-	}
-
-	if (*wds && !(fc & IEEE80211_FCTL_FROMDS) && local->ap &&
-	    hostap_is_sta_assoc(local->ap, hdr->addr2)) {
-		/* STA is actually associated with us even though it has a
-		 * registered WDS link. Assume it is in 'AP client' mode.
-		 * Since this is a 3-addr frame, assume it is not (bogus) WDS
-		 * frame and process it like any normal ToDS frame from
-		 * associated STA. */
-		*wds = NULL;
-	}
-
-	return 0;
-}
-
-
-static int hostap_is_eapol_frame(local_info_t *local, struct sk_buff *skb)
-{
-	struct net_device *dev = local->dev;
-	u16 fc, ethertype;
-	struct ieee80211_hdr *hdr;
-	u8 *pos;
-
-	if (skb->len < 24)
-		return 0;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	fc = le16_to_cpu(hdr->frame_control);
-
-	/* check that the frame is unicast frame to us */
-	if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-	    IEEE80211_FCTL_TODS &&
-	    ether_addr_equal(hdr->addr1, dev->dev_addr) &&
-	    ether_addr_equal(hdr->addr3, dev->dev_addr)) {
-		/* ToDS frame with own addr BSSID and DA */
-	} else if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-		   IEEE80211_FCTL_FROMDS &&
-		   ether_addr_equal(hdr->addr1, dev->dev_addr)) {
-		/* FromDS frame with own addr as DA */
-	} else
-		return 0;
-
-	if (skb->len < 24 + 8)
-		return 0;
-
-	/* check for port access entity Ethernet type */
-	pos = skb->data + 24;
-	ethertype = (pos[6] << 8) | pos[7];
-	if (ethertype == ETH_P_PAE)
-		return 1;
-
-	return 0;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static int
-hostap_rx_frame_decrypt(local_info_t *local, struct sk_buff *skb,
-			struct lib80211_crypt_data *crypt)
-{
-	struct ieee80211_hdr *hdr;
-	int res, hdrlen;
-
-	if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
-		return 0;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	hdrlen = hostap_80211_get_hdrlen(hdr->frame_control);
-
-	if (local->tkip_countermeasures &&
-	    strcmp(crypt->ops->name, "TKIP") == 0) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
-			       "received packet from %pM\n",
-			       local->dev->name, hdr->addr2);
-		}
-		return -1;
-	}
-
-	atomic_inc(&crypt->refcnt);
-	res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
-	atomic_dec(&crypt->refcnt);
-	if (res < 0) {
-		printk(KERN_DEBUG "%s: decryption failed (SA=%pM) res=%d\n",
-		       local->dev->name, hdr->addr2, res);
-		local->comm_tallies.rx_discards_wep_undecryptable++;
-		return -1;
-	}
-
-	return res;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static int
-hostap_rx_frame_decrypt_msdu(local_info_t *local, struct sk_buff *skb,
-			     int keyidx, struct lib80211_crypt_data *crypt)
-{
-	struct ieee80211_hdr *hdr;
-	int res, hdrlen;
-
-	if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
-		return 0;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	hdrlen = hostap_80211_get_hdrlen(hdr->frame_control);
-
-	atomic_inc(&crypt->refcnt);
-	res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv);
-	atomic_dec(&crypt->refcnt);
-	if (res < 0) {
-		printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
-		       " (SA=%pM keyidx=%d)\n",
-		       local->dev->name, hdr->addr2, keyidx);
-		return -1;
-	}
-
-	return 0;
-}
-
-
-/* All received frames are sent to this function. @skb contains the frame in
- * IEEE 802.11 format, i.e., in the format it was sent over air.
- * This function is called only as a tasklet (software IRQ). */
-void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb,
-		     struct hostap_80211_rx_status *rx_stats)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct ieee80211_hdr *hdr;
-	size_t hdrlen;
-	u16 fc, type, stype, sc;
-	struct net_device *wds = NULL;
-	unsigned int frag;
-	u8 *payload;
-	struct sk_buff *skb2 = NULL;
-	u16 ethertype;
-	int frame_authorized = 0;
-	int from_assoc_ap = 0;
-	u8 dst[ETH_ALEN];
-	u8 src[ETH_ALEN];
-	struct lib80211_crypt_data *crypt = NULL;
-	void *sta = NULL;
-	int keyidx = 0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	iface->stats.rx_packets++;
-	iface->stats.rx_bytes += skb->len;
-
-	/* dev is the master radio device; change this to be the default
-	 * virtual interface (this may be changed to WDS device below) */
-	dev = local->ddev;
-	iface = netdev_priv(dev);
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-
-	if (skb->len < 10)
-		goto rx_dropped;
-
-	fc = le16_to_cpu(hdr->frame_control);
-	type = fc & IEEE80211_FCTL_FTYPE;
-	stype = fc & IEEE80211_FCTL_STYPE;
-	sc = le16_to_cpu(hdr->seq_ctrl);
-	frag = sc & IEEE80211_SCTL_FRAG;
-	hdrlen = hostap_80211_get_hdrlen(hdr->frame_control);
-
-	/* Put this code here so that we avoid duplicating it in all
-	 * Rx paths. - Jean II */
-#ifdef IW_WIRELESS_SPY		/* defined in iw_handler.h */
-	/* If spy monitoring on */
-	if (iface->spy_data.spy_number > 0) {
-		struct iw_quality wstats;
-		wstats.level = rx_stats->signal;
-		wstats.noise = rx_stats->noise;
-		wstats.updated = IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_UPDATED
-			| IW_QUAL_QUAL_INVALID | IW_QUAL_DBM;
-		/* Update spy records */
-		wireless_spy_update(dev, hdr->addr2, &wstats);
-	}
-#endif /* IW_WIRELESS_SPY */
-	hostap_update_rx_stats(local->ap, hdr, rx_stats);
-
-	if (local->iw_mode == IW_MODE_MONITOR) {
-		monitor_rx(dev, skb, rx_stats);
-		return;
-	}
-
-	if (local->host_decrypt) {
-		int idx = 0;
-		if (skb->len >= hdrlen + 3)
-			idx = skb->data[hdrlen + 3] >> 6;
-		crypt = local->crypt_info.crypt[idx];
-		sta = NULL;
-
-		/* Use station specific key to override default keys if the
-		 * receiver address is a unicast address ("individual RA"). If
-		 * bcrx_sta_key parameter is set, station specific key is used
-		 * even with broad/multicast targets (this is against IEEE
-		 * 802.11, but makes it easier to use different keys with
-		 * stations that do not support WEP key mapping). */
-
-		if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key)
-			(void) hostap_handle_sta_crypto(local, hdr, &crypt,
-							&sta);
-
-		/* allow NULL decrypt to indicate an station specific override
-		 * for default encryption */
-		if (crypt && (crypt->ops == NULL ||
-			      crypt->ops->decrypt_mpdu == NULL))
-			crypt = NULL;
-
-		if (!crypt && (fc & IEEE80211_FCTL_PROTECTED)) {
-#if 0
-			/* This seems to be triggered by some (multicast?)
-			 * frames from other than current BSS, so just drop the
-			 * frames silently instead of filling system log with
-			 * these reports. */
-			printk(KERN_DEBUG "%s: WEP decryption failed (not set)"
-			       " (SA=%pM)\n",
-			       local->dev->name, hdr->addr2);
-#endif
-			local->comm_tallies.rx_discards_wep_undecryptable++;
-			goto rx_dropped;
-		}
-	}
-
-	if (type != IEEE80211_FTYPE_DATA) {
-		if (type == IEEE80211_FTYPE_MGMT &&
-		    stype == IEEE80211_STYPE_AUTH &&
-		    fc & IEEE80211_FCTL_PROTECTED && local->host_decrypt &&
-		    (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0)
-		{
-			printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
-			       "from %pM\n", dev->name, hdr->addr2);
-			/* TODO: could inform hostapd about this so that it
-			 * could send auth failure report */
-			goto rx_dropped;
-		}
-
-		if (hostap_rx_frame_mgmt(local, skb, rx_stats, type, stype))
-			goto rx_dropped;
-		else
-			goto rx_exit;
-	}
-
-	/* Data frame - extract src/dst addresses */
-	if (skb->len < IEEE80211_DATA_HDR3_LEN)
-		goto rx_dropped;
-
-	switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
-	case IEEE80211_FCTL_FROMDS:
-		memcpy(dst, hdr->addr1, ETH_ALEN);
-		memcpy(src, hdr->addr3, ETH_ALEN);
-		break;
-	case IEEE80211_FCTL_TODS:
-		memcpy(dst, hdr->addr3, ETH_ALEN);
-		memcpy(src, hdr->addr2, ETH_ALEN);
-		break;
-	case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
-		if (skb->len < IEEE80211_DATA_HDR4_LEN)
-			goto rx_dropped;
-		memcpy(dst, hdr->addr3, ETH_ALEN);
-		memcpy(src, hdr->addr4, ETH_ALEN);
-		break;
-	default:
-		memcpy(dst, hdr->addr1, ETH_ALEN);
-		memcpy(src, hdr->addr2, ETH_ALEN);
-		break;
-	}
-
-	if (hostap_rx_frame_wds(local, hdr, fc, &wds))
-		goto rx_dropped;
-	if (wds)
-		skb->dev = dev = wds;
-
-	if (local->iw_mode == IW_MODE_MASTER && !wds &&
-	    (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-	    IEEE80211_FCTL_FROMDS &&
-	    local->stadev &&
-	    memcmp(hdr->addr2, local->assoc_ap_addr, ETH_ALEN) == 0) {
-		/* Frame from BSSID of the AP for which we are a client */
-		skb->dev = dev = local->stadev;
-		from_assoc_ap = 1;
-	}
-
-	if ((local->iw_mode == IW_MODE_MASTER ||
-	     local->iw_mode == IW_MODE_REPEAT) &&
-	    !from_assoc_ap) {
-		switch (hostap_handle_sta_rx(local, dev, skb, rx_stats,
-					     wds != NULL)) {
-		case AP_RX_CONTINUE_NOT_AUTHORIZED:
-			frame_authorized = 0;
-			break;
-		case AP_RX_CONTINUE:
-			frame_authorized = 1;
-			break;
-		case AP_RX_DROP:
-			goto rx_dropped;
-		case AP_RX_EXIT:
-			goto rx_exit;
-		}
-	}
-
-	/* Nullfunc frames may have PS-bit set, so they must be passed to
-	 * hostap_handle_sta_rx() before being dropped here. */
-	if (stype != IEEE80211_STYPE_DATA &&
-	    stype != IEEE80211_STYPE_DATA_CFACK &&
-	    stype != IEEE80211_STYPE_DATA_CFPOLL &&
-	    stype != IEEE80211_STYPE_DATA_CFACKPOLL) {
-		if (stype != IEEE80211_STYPE_NULLFUNC)
-			printk(KERN_DEBUG "%s: RX: dropped data frame "
-			       "with no data (type=0x%02x, subtype=0x%02x)\n",
-			       dev->name, type >> 2, stype >> 4);
-		goto rx_dropped;
-	}
-
-	/* skb: hdr + (possibly fragmented, possibly encrypted) payload */
-
-	if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
-	    (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0)
-		goto rx_dropped;
-	hdr = (struct ieee80211_hdr *) skb->data;
-
-	/* skb: hdr + (possibly fragmented) plaintext payload */
-
-	if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
-	    (frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) {
-		int flen;
-		struct sk_buff *frag_skb =
-			prism2_frag_cache_get(local, hdr);
-		if (!frag_skb) {
-			printk(KERN_DEBUG "%s: Rx cannot get skb from "
-			       "fragment cache (morefrag=%d seq=%u frag=%u)\n",
-			       dev->name, (fc & IEEE80211_FCTL_MOREFRAGS) != 0,
-			       (sc & IEEE80211_SCTL_SEQ) >> 4, frag);
-			goto rx_dropped;
-		}
-
-		flen = skb->len;
-		if (frag != 0)
-			flen -= hdrlen;
-
-		if (frag_skb->tail + flen > frag_skb->end) {
-			printk(KERN_WARNING "%s: host decrypted and "
-			       "reassembled frame did not fit skb\n",
-			       dev->name);
-			prism2_frag_cache_invalidate(local, hdr);
-			goto rx_dropped;
-		}
-
-		if (frag == 0) {
-			/* copy first fragment (including full headers) into
-			 * beginning of the fragment cache skb */
-			skb_copy_from_linear_data(skb, skb_put(frag_skb, flen),
-						  flen);
-		} else {
-			/* append frame payload to the end of the fragment
-			 * cache skb */
-			skb_copy_from_linear_data_offset(skb, hdrlen,
-							 skb_put(frag_skb,
-								 flen), flen);
-		}
-		dev_kfree_skb(skb);
-		skb = NULL;
-
-		if (fc & IEEE80211_FCTL_MOREFRAGS) {
-			/* more fragments expected - leave the skb in fragment
-			 * cache for now; it will be delivered to upper layers
-			 * after all fragments have been received */
-			goto rx_exit;
-		}
-
-		/* this was the last fragment and the frame will be
-		 * delivered, so remove skb from fragment cache */
-		skb = frag_skb;
-		hdr = (struct ieee80211_hdr *) skb->data;
-		prism2_frag_cache_invalidate(local, hdr);
-	}
-
-	/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
-	 * encrypted/authenticated */
-
-	if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
-	    hostap_rx_frame_decrypt_msdu(local, skb, keyidx, crypt))
-		goto rx_dropped;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !local->open_wep) {
-		if (local->ieee_802_1x &&
-		    hostap_is_eapol_frame(local, skb)) {
-			/* pass unencrypted EAPOL frames even if encryption is
-			 * configured */
-			PDEBUG(DEBUG_EXTRA2, "%s: RX: IEEE 802.1X - passing "
-			       "unencrypted EAPOL frame\n", local->dev->name);
-		} else {
-			printk(KERN_DEBUG "%s: encryption configured, but RX "
-			       "frame not encrypted (SA=%pM)\n",
-			       local->dev->name, hdr->addr2);
-			goto rx_dropped;
-		}
-	}
-
-	if (local->drop_unencrypted && !(fc & IEEE80211_FCTL_PROTECTED) &&
-	    !hostap_is_eapol_frame(local, skb)) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: dropped unencrypted RX data "
-			       "frame from %pM (drop_unencrypted=1)\n",
-			       dev->name, hdr->addr2);
-		}
-		goto rx_dropped;
-	}
-
-	/* skb: hdr + (possible reassembled) full plaintext payload */
-
-	payload = skb->data + hdrlen;
-	ethertype = (payload[6] << 8) | payload[7];
-
-	/* If IEEE 802.1X is used, check whether the port is authorized to send
-	 * the received frame. */
-	if (local->ieee_802_1x && local->iw_mode == IW_MODE_MASTER) {
-		if (ethertype == ETH_P_PAE) {
-			PDEBUG(DEBUG_EXTRA2, "%s: RX: IEEE 802.1X frame\n",
-			       dev->name);
-			if (local->hostapd && local->apdev) {
-				/* Send IEEE 802.1X frames to the user
-				 * space daemon for processing */
-				prism2_rx_80211(local->apdev, skb, rx_stats,
-						PRISM2_RX_MGMT);
-				local->apdevstats.rx_packets++;
-				local->apdevstats.rx_bytes += skb->len;
-				goto rx_exit;
-			}
-		} else if (!frame_authorized) {
-			printk(KERN_DEBUG "%s: dropped frame from "
-			       "unauthorized port (IEEE 802.1X): "
-			       "ethertype=0x%04x\n",
-			       dev->name, ethertype);
-			goto rx_dropped;
-		}
-	}
-
-	/* convert hdr + possible LLC headers into Ethernet header */
-	if (skb->len - hdrlen >= 8 &&
-	    ((memcmp(payload, rfc1042_header, 6) == 0 &&
-	      ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
-	     memcmp(payload, bridge_tunnel_header, 6) == 0)) {
-		/* remove RFC1042 or Bridge-Tunnel encapsulation and
-		 * replace EtherType */
-		skb_pull(skb, hdrlen + 6);
-		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
-		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
-	} else {
-		__be16 len;
-		/* Leave Ethernet header part of hdr and full payload */
-		skb_pull(skb, hdrlen);
-		len = htons(skb->len);
-		memcpy(skb_push(skb, 2), &len, 2);
-		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
-		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
-	}
-
-	if (wds && ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-		    IEEE80211_FCTL_TODS) &&
-	    skb->len >= ETH_HLEN + ETH_ALEN) {
-		/* Non-standard frame: get addr4 from its bogus location after
-		 * the payload */
-		skb_copy_from_linear_data_offset(skb, skb->len - ETH_ALEN,
-						 skb->data + ETH_ALEN,
-						 ETH_ALEN);
-		skb_trim(skb, skb->len - ETH_ALEN);
-	}
-
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += skb->len;
-
-	if (local->iw_mode == IW_MODE_MASTER && !wds &&
-	    local->ap->bridge_packets) {
-		if (dst[0] & 0x01) {
-			/* copy multicast frame both to the higher layers and
-			 * to the wireless media */
-			local->ap->bridged_multicast++;
-			skb2 = skb_clone(skb, GFP_ATOMIC);
-			if (skb2 == NULL)
-				printk(KERN_DEBUG "%s: skb_clone failed for "
-				       "multicast frame\n", dev->name);
-		} else if (hostap_is_sta_authorized(local->ap, dst)) {
-			/* send frame directly to the associated STA using
-			 * wireless media and not passing to higher layers */
-			local->ap->bridged_unicast++;
-			skb2 = skb;
-			skb = NULL;
-		}
-	}
-
-	if (skb2 != NULL) {
-		/* send to wireless media */
-		skb2->dev = dev;
-		skb2->protocol = cpu_to_be16(ETH_P_802_3);
-		skb_reset_mac_header(skb2);
-		skb_reset_network_header(skb2);
-		/* skb2->network_header += ETH_HLEN; */
-		dev_queue_xmit(skb2);
-	}
-
-	if (skb) {
-		skb->protocol = eth_type_trans(skb, dev);
-		memset(skb->cb, 0, sizeof(skb->cb));
-		netif_rx(skb);
-	}
-
- rx_exit:
-	if (sta)
-		hostap_handle_sta_release(sta);
-	return;
-
- rx_dropped:
-	dev_kfree_skb(skb);
-
-	dev->stats.rx_dropped++;
-	goto rx_exit;
-}
-
-
-EXPORT_SYMBOL(hostap_80211_rx);
diff --git a/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c b/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c
deleted file mode 100644
index c47da06945..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c
+++ /dev/null
@@ -1,554 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/etherdevice.h>
-
-#include "hostap_80211.h"
-#include "hostap_common.h"
-#include "hostap_wlan.h"
-#include "hostap.h"
-#include "hostap_ap.h"
-
-/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
-/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-static unsigned char rfc1042_header[] =
-{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
-/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-static unsigned char bridge_tunnel_header[] =
-{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
-/* No encapsulation header if EtherType < 0x600 (=length) */
-
-void hostap_dump_tx_80211(const char *name, struct sk_buff *skb)
-{
-	struct ieee80211_hdr *hdr;
-	u16 fc;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-
-	printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n",
-	       name, skb->len, jiffies);
-
-	if (skb->len < 2)
-		return;
-
-	fc = le16_to_cpu(hdr->frame_control);
-	printk(KERN_DEBUG "   FC=0x%04x (type=%d:%d)%s%s",
-	       fc, (fc & IEEE80211_FCTL_FTYPE) >> 2,
-	       (fc & IEEE80211_FCTL_STYPE) >> 4,
-	       fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "",
-	       fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : "");
-
-	if (skb->len < IEEE80211_DATA_HDR3_LEN) {
-		printk("\n");
-		return;
-	}
-
-	printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id),
-	       le16_to_cpu(hdr->seq_ctrl));
-
-	printk(KERN_DEBUG "   A1=%pM", hdr->addr1);
-	printk(" A2=%pM", hdr->addr2);
-	printk(" A3=%pM", hdr->addr3);
-	if (skb->len >= 30)
-		printk(" A4=%pM", hdr->addr4);
-	printk("\n");
-}
-
-
-/* hard_start_xmit function for data interfaces (wlan#, wlan#wds#, wlan#sta)
- * Convert Ethernet header into a suitable IEEE 802.11 header depending on
- * device configuration. */
-netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb,
-				   struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int need_headroom, need_tailroom = 0;
-	struct ieee80211_hdr hdr;
-	u16 fc, ethertype = 0;
-	enum {
-		WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME
-	} use_wds = WDS_NO;
-	u8 *encaps_data;
-	int hdr_len, encaps_len, skip_header_bytes;
-	int to_assoc_ap = 0;
-	struct hostap_skb_tx_data *meta;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (skb->len < ETH_HLEN) {
-		printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
-		       "(len=%d)\n", dev->name, skb->len);
-		kfree_skb(skb);
-		return NETDEV_TX_OK;
-	}
-
-	if (local->ddev != dev) {
-		use_wds = (local->iw_mode == IW_MODE_MASTER &&
-			   !(local->wds_type & HOSTAP_WDS_STANDARD_FRAME)) ?
-			WDS_OWN_FRAME : WDS_COMPLIANT_FRAME;
-		if (dev == local->stadev) {
-			to_assoc_ap = 1;
-			use_wds = WDS_NO;
-		} else if (dev == local->apdev) {
-			printk(KERN_DEBUG "%s: prism2_tx: trying to use "
-			       "AP device with Ethernet net dev\n", dev->name);
-			kfree_skb(skb);
-			return NETDEV_TX_OK;
-		}
-	} else {
-		if (local->iw_mode == IW_MODE_REPEAT) {
-			printk(KERN_DEBUG "%s: prism2_tx: trying to use "
-			       "non-WDS link in Repeater mode\n", dev->name);
-			kfree_skb(skb);
-			return NETDEV_TX_OK;
-		} else if (local->iw_mode == IW_MODE_INFRA &&
-			   (local->wds_type & HOSTAP_WDS_AP_CLIENT) &&
-			   !ether_addr_equal(skb->data + ETH_ALEN, dev->dev_addr)) {
-			/* AP client mode: send frames with foreign src addr
-			 * using 4-addr WDS frames */
-			use_wds = WDS_COMPLIANT_FRAME;
-		}
-	}
-
-	/* Incoming skb->data: dst_addr[6], src_addr[6], proto[2], payload
-	 * ==>
-	 * Prism2 TX frame with 802.11 header:
-	 * txdesc (address order depending on used mode; includes dst_addr and
-	 * src_addr), possible encapsulation (RFC1042/Bridge-Tunnel;
-	 * proto[2], payload {, possible addr4[6]} */
-
-	ethertype = (skb->data[12] << 8) | skb->data[13];
-
-	memset(&hdr, 0, sizeof(hdr));
-
-	/* Length of data after IEEE 802.11 header */
-	encaps_data = NULL;
-	encaps_len = 0;
-	skip_header_bytes = ETH_HLEN;
-	if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) {
-		encaps_data = bridge_tunnel_header;
-		encaps_len = sizeof(bridge_tunnel_header);
-		skip_header_bytes -= 2;
-	} else if (ethertype >= 0x600) {
-		encaps_data = rfc1042_header;
-		encaps_len = sizeof(rfc1042_header);
-		skip_header_bytes -= 2;
-	}
-
-	fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA;
-	hdr_len = IEEE80211_DATA_HDR3_LEN;
-
-	if (use_wds != WDS_NO) {
-		/* Note! Prism2 station firmware has problems with sending real
-		 * 802.11 frames with four addresses; until these problems can
-		 * be fixed or worked around, 4-addr frames needed for WDS are
-		 * using incompatible format: FromDS flag is not set and the
-		 * fourth address is added after the frame payload; it is
-		 * assumed, that the receiving station knows how to handle this
-		 * frame format */
-
-		if (use_wds == WDS_COMPLIANT_FRAME) {
-			fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS;
-			/* From&To DS: Addr1 = RA, Addr2 = TA, Addr3 = DA,
-			 * Addr4 = SA */
-			skb_copy_from_linear_data_offset(skb, ETH_ALEN,
-							 &hdr.addr4, ETH_ALEN);
-			hdr_len += ETH_ALEN;
-		} else {
-			/* bogus 4-addr format to workaround Prism2 station
-			 * f/w bug */
-			fc |= IEEE80211_FCTL_TODS;
-			/* From DS: Addr1 = DA (used as RA),
-			 * Addr2 = BSSID (used as TA), Addr3 = SA (used as DA),
-			 */
-
-			/* SA from skb->data + ETH_ALEN will be added after
-			 * frame payload; use hdr.addr4 as a temporary buffer
-			 */
-			skb_copy_from_linear_data_offset(skb, ETH_ALEN,
-							 &hdr.addr4, ETH_ALEN);
-			need_tailroom += ETH_ALEN;
-		}
-
-		/* send broadcast and multicast frames to broadcast RA, if
-		 * configured; otherwise, use unicast RA of the WDS link */
-		if ((local->wds_type & HOSTAP_WDS_BROADCAST_RA) &&
-		    is_multicast_ether_addr(skb->data))
-			eth_broadcast_addr(hdr.addr1);
-		else if (iface->type == HOSTAP_INTERFACE_WDS)
-			memcpy(&hdr.addr1, iface->u.wds.remote_addr,
-			       ETH_ALEN);
-		else
-			memcpy(&hdr.addr1, local->bssid, ETH_ALEN);
-		memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN);
-		skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN);
-	} else if (local->iw_mode == IW_MODE_MASTER && !to_assoc_ap) {
-		fc |= IEEE80211_FCTL_FROMDS;
-		/* From DS: Addr1 = DA, Addr2 = BSSID, Addr3 = SA */
-		skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN);
-		memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN);
-		skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr3,
-						 ETH_ALEN);
-	} else if (local->iw_mode == IW_MODE_INFRA || to_assoc_ap) {
-		fc |= IEEE80211_FCTL_TODS;
-		/* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */
-		memcpy(&hdr.addr1, to_assoc_ap ?
-		       local->assoc_ap_addr : local->bssid, ETH_ALEN);
-		skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2,
-						 ETH_ALEN);
-		skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN);
-	} else if (local->iw_mode == IW_MODE_ADHOC) {
-		/* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */
-		skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN);
-		skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2,
-						 ETH_ALEN);
-		memcpy(&hdr.addr3, local->bssid, ETH_ALEN);
-	}
-
-	hdr.frame_control = cpu_to_le16(fc);
-
-	skb_pull(skb, skip_header_bytes);
-	need_headroom = local->func->need_tx_headroom + hdr_len + encaps_len;
-	if (skb_tailroom(skb) < need_tailroom) {
-		skb = skb_unshare(skb, GFP_ATOMIC);
-		if (skb == NULL) {
-			iface->stats.tx_dropped++;
-			return NETDEV_TX_OK;
-		}
-		if (pskb_expand_head(skb, need_headroom, need_tailroom,
-				     GFP_ATOMIC)) {
-			kfree_skb(skb);
-			iface->stats.tx_dropped++;
-			return NETDEV_TX_OK;
-		}
-	} else if (skb_headroom(skb) < need_headroom) {
-		struct sk_buff *tmp = skb;
-		skb = skb_realloc_headroom(skb, need_headroom);
-		kfree_skb(tmp);
-		if (skb == NULL) {
-			iface->stats.tx_dropped++;
-			return NETDEV_TX_OK;
-		}
-	} else {
-		skb = skb_unshare(skb, GFP_ATOMIC);
-		if (skb == NULL) {
-			iface->stats.tx_dropped++;
-			return NETDEV_TX_OK;
-		}
-	}
-
-	if (encaps_data)
-		memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len);
-	memcpy(skb_push(skb, hdr_len), &hdr, hdr_len);
-	if (use_wds == WDS_OWN_FRAME) {
-		skb_put_data(skb, &hdr.addr4, ETH_ALEN);
-	}
-
-	iface->stats.tx_packets++;
-	iface->stats.tx_bytes += skb->len;
-
-	skb_reset_mac_header(skb);
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-	memset(meta, 0, sizeof(*meta));
-	meta->magic = HOSTAP_SKB_TX_DATA_MAGIC;
-	if (use_wds)
-		meta->flags |= HOSTAP_TX_FLAGS_WDS;
-	meta->ethertype = ethertype;
-	meta->iface = iface;
-
-	/* Send IEEE 802.11 encapsulated frame using the master radio device */
-	skb->dev = local->dev;
-	dev_queue_xmit(skb);
-	return NETDEV_TX_OK;
-}
-
-
-/* hard_start_xmit function for hostapd wlan#ap interfaces */
-netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb,
-				   struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct hostap_skb_tx_data *meta;
-	struct ieee80211_hdr *hdr;
-	u16 fc;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (skb->len < 10) {
-		printk(KERN_DEBUG "%s: hostap_mgmt_start_xmit: short skb "
-		       "(len=%d)\n", dev->name, skb->len);
-		kfree_skb(skb);
-		return NETDEV_TX_OK;
-	}
-
-	iface->stats.tx_packets++;
-	iface->stats.tx_bytes += skb->len;
-
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-	memset(meta, 0, sizeof(*meta));
-	meta->magic = HOSTAP_SKB_TX_DATA_MAGIC;
-	meta->iface = iface;
-
-	if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) {
-		hdr = (struct ieee80211_hdr *) skb->data;
-		fc = le16_to_cpu(hdr->frame_control);
-		if (ieee80211_is_data(hdr->frame_control) &&
-		    (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DATA) {
-			u8 *pos = &skb->data[IEEE80211_DATA_HDR3_LEN +
-					     sizeof(rfc1042_header)];
-			meta->ethertype = (pos[0] << 8) | pos[1];
-		}
-	}
-
-	/* Send IEEE 802.11 encapsulated frame using the master radio device */
-	skb->dev = local->dev;
-	dev_queue_xmit(skb);
-	return NETDEV_TX_OK;
-}
-
-
-/* Called only from software IRQ */
-static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb,
-					  struct lib80211_crypt_data *crypt)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct ieee80211_hdr *hdr;
-	int prefix_len, postfix_len, hdr_len, res;
-
-	iface = netdev_priv(skb->dev);
-	local = iface->local;
-
-	if (skb->len < IEEE80211_DATA_HDR3_LEN) {
-		kfree_skb(skb);
-		return NULL;
-	}
-
-	if (local->tkip_countermeasures &&
-	    strcmp(crypt->ops->name, "TKIP") == 0) {
-		hdr = (struct ieee80211_hdr *) skb->data;
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
-			       "TX packet to %pM\n",
-			       local->dev->name, hdr->addr1);
-		}
-		kfree_skb(skb);
-		return NULL;
-	}
-
-	skb = skb_unshare(skb, GFP_ATOMIC);
-	if (skb == NULL)
-		return NULL;
-
-	prefix_len = crypt->ops->extra_mpdu_prefix_len +
-		crypt->ops->extra_msdu_prefix_len;
-	postfix_len = crypt->ops->extra_mpdu_postfix_len +
-		crypt->ops->extra_msdu_postfix_len;
-	if ((skb_headroom(skb) < prefix_len ||
-	     skb_tailroom(skb) < postfix_len) &&
-	    pskb_expand_head(skb, prefix_len, postfix_len, GFP_ATOMIC)) {
-		kfree_skb(skb);
-		return NULL;
-	}
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	hdr_len = hostap_80211_get_hdrlen(hdr->frame_control);
-
-	/* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
-	 * call both MSDU and MPDU encryption functions from here. */
-	atomic_inc(&crypt->refcnt);
-	res = 0;
-	if (crypt->ops->encrypt_msdu)
-		res = crypt->ops->encrypt_msdu(skb, hdr_len, crypt->priv);
-	if (res == 0 && crypt->ops->encrypt_mpdu)
-		res = crypt->ops->encrypt_mpdu(skb, hdr_len, crypt->priv);
-	atomic_dec(&crypt->refcnt);
-	if (res < 0) {
-		kfree_skb(skb);
-		return NULL;
-	}
-
-	return skb;
-}
-
-
-/* hard_start_xmit function for master radio interface wifi#.
- * AP processing (TX rate control, power save buffering, etc.).
- * Use hardware TX function to send the frame. */
-netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb,
-				     struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	netdev_tx_t ret = NETDEV_TX_BUSY;
-	u16 fc;
-	struct hostap_tx_data tx;
-	ap_tx_ret tx_ret;
-	struct hostap_skb_tx_data *meta;
-	int no_encrypt = 0;
-	struct ieee80211_hdr *hdr;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	tx.skb = skb;
-	tx.sta_ptr = NULL;
-
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-	if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) {
-		printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, "
-		       "expected 0x%08x)\n",
-		       dev->name, meta->magic, HOSTAP_SKB_TX_DATA_MAGIC);
-		ret = NETDEV_TX_OK;
-		iface->stats.tx_dropped++;
-		goto fail;
-	}
-
-	if (local->host_encrypt) {
-		/* Set crypt to default algorithm and key; will be replaced in
-		 * AP code if STA has own alg/key */
-		tx.crypt = local->crypt_info.crypt[local->crypt_info.tx_keyidx];
-		tx.host_encrypt = 1;
-	} else {
-		tx.crypt = NULL;
-		tx.host_encrypt = 0;
-	}
-
-	if (skb->len < 24) {
-		printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
-		       "(len=%d)\n", dev->name, skb->len);
-		ret = NETDEV_TX_OK;
-		iface->stats.tx_dropped++;
-		goto fail;
-	}
-
-	/* FIX (?):
-	 * Wi-Fi 802.11b test plan suggests that AP should ignore power save
-	 * bit in authentication and (re)association frames and assume tha
-	 * STA remains awake for the response. */
-	tx_ret = hostap_handle_sta_tx(local, &tx);
-	skb = tx.skb;
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-	hdr = (struct ieee80211_hdr *) skb->data;
-	fc = le16_to_cpu(hdr->frame_control);
-	switch (tx_ret) {
-	case AP_TX_CONTINUE:
-		break;
-	case AP_TX_CONTINUE_NOT_AUTHORIZED:
-		if (local->ieee_802_1x &&
-		    ieee80211_is_data(hdr->frame_control) &&
-		    meta->ethertype != ETH_P_PAE &&
-		    !(meta->flags & HOSTAP_TX_FLAGS_WDS)) {
-			printk(KERN_DEBUG "%s: dropped frame to unauthorized "
-			       "port (IEEE 802.1X): ethertype=0x%04x\n",
-			       dev->name, meta->ethertype);
-			hostap_dump_tx_80211(dev->name, skb);
-
-			ret = NETDEV_TX_OK; /* drop packet */
-			iface->stats.tx_dropped++;
-			goto fail;
-		}
-		break;
-	case AP_TX_DROP:
-		ret = NETDEV_TX_OK; /* drop packet */
-		iface->stats.tx_dropped++;
-		goto fail;
-	case AP_TX_RETRY:
-		goto fail;
-	case AP_TX_BUFFERED:
-		/* do not free skb here, it will be freed when the
-		 * buffered frame is sent/timed out */
-		ret = NETDEV_TX_OK;
-		goto tx_exit;
-	}
-
-	/* Request TX callback if protocol version is 2 in 802.11 header;
-	 * this version 2 is a special case used between hostapd and kernel
-	 * driver */
-	if (((fc & IEEE80211_FCTL_VERS) == BIT(1)) &&
-	    local->ap && local->ap->tx_callback_idx && meta->tx_cb_idx == 0) {
-		meta->tx_cb_idx = local->ap->tx_callback_idx;
-
-		/* remove special version from the frame header */
-		fc &= ~IEEE80211_FCTL_VERS;
-		hdr->frame_control = cpu_to_le16(fc);
-	}
-
-	if (!ieee80211_is_data(hdr->frame_control)) {
-		no_encrypt = 1;
-		tx.crypt = NULL;
-	}
-
-	if (local->ieee_802_1x && meta->ethertype == ETH_P_PAE && tx.crypt &&
-	    !(fc & IEEE80211_FCTL_PROTECTED)) {
-		no_encrypt = 1;
-		PDEBUG(DEBUG_EXTRA2, "%s: TX: IEEE 802.1X - passing "
-		       "unencrypted EAPOL frame\n", dev->name);
-		tx.crypt = NULL; /* no encryption for IEEE 802.1X frames */
-	}
-
-	if (tx.crypt && (!tx.crypt->ops || !tx.crypt->ops->encrypt_mpdu))
-		tx.crypt = NULL;
-	else if ((tx.crypt ||
-		 local->crypt_info.crypt[local->crypt_info.tx_keyidx]) &&
-		 !no_encrypt) {
-		/* Add ISWEP flag both for firmware and host based encryption
-		 */
-		fc |= IEEE80211_FCTL_PROTECTED;
-		hdr->frame_control = cpu_to_le16(fc);
-	} else if (local->drop_unencrypted &&
-		   ieee80211_is_data(hdr->frame_control) &&
-		   meta->ethertype != ETH_P_PAE) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: dropped unencrypted TX data "
-			       "frame (drop_unencrypted=1)\n", dev->name);
-		}
-		iface->stats.tx_dropped++;
-		ret = NETDEV_TX_OK;
-		goto fail;
-	}
-
-	if (tx.crypt) {
-		skb = hostap_tx_encrypt(skb, tx.crypt);
-		if (skb == NULL) {
-			printk(KERN_DEBUG "%s: TX - encryption failed\n",
-			       dev->name);
-			ret = NETDEV_TX_OK;
-			goto fail;
-		}
-		meta = (struct hostap_skb_tx_data *) skb->cb;
-		if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) {
-			printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, "
-			       "expected 0x%08x) after hostap_tx_encrypt\n",
-			       dev->name, meta->magic,
-			       HOSTAP_SKB_TX_DATA_MAGIC);
-			ret = NETDEV_TX_OK;
-			iface->stats.tx_dropped++;
-			goto fail;
-		}
-	}
-
-	if (local->func->tx == NULL || local->func->tx(skb, dev)) {
-		ret = NETDEV_TX_OK;
-		iface->stats.tx_dropped++;
-	} else {
-		ret = NETDEV_TX_OK;
-		iface->stats.tx_packets++;
-		iface->stats.tx_bytes += skb->len;
-	}
-
- fail:
-	if (ret == NETDEV_TX_OK && skb)
-		dev_kfree_skb(skb);
- tx_exit:
-	if (tx.sta_ptr)
-		hostap_handle_sta_release(tx.sta_ptr);
-	return ret;
-}
-
-
-EXPORT_SYMBOL(hostap_master_start_xmit);
diff --git a/drivers/net/wireless/intersil/hostap/hostap_ap.c b/drivers/net/wireless/intersil/hostap/hostap_ap.c
deleted file mode 100644
index 9b546a71e7..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_ap.c
+++ /dev/null
@@ -1,3277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Intersil Prism2 driver with Host AP (software access point) support
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <j@w1.fi>
- * Copyright (c) 2002-2005, Jouni Malinen <j@w1.fi>
- *
- * This file is to be included into hostap.c when S/W AP functionality is
- * compiled.
- *
- * AP:  FIX:
- * - if unicast Class 2 (assoc,reassoc,disassoc) frame received from
- *   unauthenticated STA, send deauth. frame (8802.11: 5.5)
- * - if unicast Class 3 (data with to/from DS,deauth,pspoll) frame received
- *   from authenticated, but unassoc STA, send disassoc frame (8802.11: 5.5)
- * - if unicast Class 3 received from unauthenticated STA, send deauth. frame
- *   (8802.11: 5.5)
- */
-
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/delay.h>
-#include <linux/random.h>
-#include <linux/if_arp.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/moduleparam.h>
-#include <linux/etherdevice.h>
-
-#include "hostap_wlan.h"
-#include "hostap.h"
-#include "hostap_ap.h"
-
-static int other_ap_policy[MAX_PARM_DEVICES] = { AP_OTHER_AP_SKIP_ALL,
-						 DEF_INTS };
-module_param_array(other_ap_policy, int, NULL, 0444);
-MODULE_PARM_DESC(other_ap_policy, "Other AP beacon monitoring policy (0-3)");
-
-static int ap_max_inactivity[MAX_PARM_DEVICES] = { AP_MAX_INACTIVITY_SEC,
-						   DEF_INTS };
-module_param_array(ap_max_inactivity, int, NULL, 0444);
-MODULE_PARM_DESC(ap_max_inactivity, "AP timeout (in seconds) for station "
-		 "inactivity");
-
-static int ap_bridge_packets[MAX_PARM_DEVICES] = { 1, DEF_INTS };
-module_param_array(ap_bridge_packets, int, NULL, 0444);
-MODULE_PARM_DESC(ap_bridge_packets, "Bridge packets directly between "
-		 "stations");
-
-static int autom_ap_wds[MAX_PARM_DEVICES] = { 0, DEF_INTS };
-module_param_array(autom_ap_wds, int, NULL, 0444);
-MODULE_PARM_DESC(autom_ap_wds, "Add WDS connections to other APs "
-		 "automatically");
-
-
-static struct sta_info* ap_get_sta(struct ap_data *ap, u8 *sta);
-static void hostap_event_expired_sta(struct net_device *dev,
-				     struct sta_info *sta);
-static void handle_add_proc_queue(struct work_struct *work);
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-static void handle_wds_oper_queue(struct work_struct *work);
-static void prism2_send_mgmt(struct net_device *dev,
-			     u16 type_subtype, char *body,
-			     int body_len, u8 *addr, u16 tx_cb_idx);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-
-#if !defined(PRISM2_NO_PROCFS_DEBUG) && defined(CONFIG_PROC_FS)
-static int ap_debug_proc_show(struct seq_file *m, void *v)
-{
-	struct ap_data *ap = pde_data(file_inode(m->file));
-
-	seq_printf(m, "BridgedUnicastFrames=%u\n", ap->bridged_unicast);
-	seq_printf(m, "BridgedMulticastFrames=%u\n", ap->bridged_multicast);
-	seq_printf(m, "max_inactivity=%u\n", ap->max_inactivity / HZ);
-	seq_printf(m, "bridge_packets=%u\n", ap->bridge_packets);
-	seq_printf(m, "nullfunc_ack=%u\n", ap->nullfunc_ack);
-	seq_printf(m, "autom_ap_wds=%u\n", ap->autom_ap_wds);
-	seq_printf(m, "auth_algs=%u\n", ap->local->auth_algs);
-	seq_printf(m, "tx_drop_nonassoc=%u\n", ap->tx_drop_nonassoc);
-	return 0;
-}
-#endif
-
-static void ap_sta_hash_add(struct ap_data *ap, struct sta_info *sta)
-{
-	sta->hnext = ap->sta_hash[STA_HASH(sta->addr)];
-	ap->sta_hash[STA_HASH(sta->addr)] = sta;
-}
-
-static void ap_sta_hash_del(struct ap_data *ap, struct sta_info *sta)
-{
-	struct sta_info *s;
-
-	s = ap->sta_hash[STA_HASH(sta->addr)];
-	if (s == NULL) return;
-	if (ether_addr_equal(s->addr, sta->addr)) {
-		ap->sta_hash[STA_HASH(sta->addr)] = s->hnext;
-		return;
-	}
-
-	while (s->hnext != NULL && !ether_addr_equal(s->hnext->addr, sta->addr))
-		s = s->hnext;
-	if (s->hnext != NULL)
-		s->hnext = s->hnext->hnext;
-	else
-		printk("AP: could not remove STA %pM from hash table\n",
-		       sta->addr);
-}
-
-static void ap_free_sta(struct ap_data *ap, struct sta_info *sta)
-{
-	if (sta->ap && sta->local)
-		hostap_event_expired_sta(sta->local->dev, sta);
-
-	if (ap->proc != NULL) {
-		char name[20];
-		sprintf(name, "%pM", sta->addr);
-		remove_proc_entry(name, ap->proc);
-	}
-
-	if (sta->crypt) {
-		sta->crypt->ops->deinit(sta->crypt->priv);
-		kfree(sta->crypt);
-		sta->crypt = NULL;
-	}
-
-	skb_queue_purge(&sta->tx_buf);
-
-	ap->num_sta--;
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	if (sta->aid > 0)
-		ap->sta_aid[sta->aid - 1] = NULL;
-
-	if (!sta->ap)
-		kfree(sta->u.sta.challenge);
-	timer_shutdown_sync(&sta->timer);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-	kfree(sta);
-}
-
-
-static void hostap_set_tim(local_info_t *local, int aid, int set)
-{
-	if (local->func->set_tim)
-		local->func->set_tim(local->dev, aid, set);
-}
-
-
-static void hostap_event_new_sta(struct net_device *dev, struct sta_info *sta)
-{
-	union iwreq_data wrqu;
-	memset(&wrqu, 0, sizeof(wrqu));
-	memcpy(wrqu.addr.sa_data, sta->addr, ETH_ALEN);
-	wrqu.addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(dev, IWEVREGISTERED, &wrqu, NULL);
-}
-
-
-static void hostap_event_expired_sta(struct net_device *dev,
-				     struct sta_info *sta)
-{
-	union iwreq_data wrqu;
-	memset(&wrqu, 0, sizeof(wrqu));
-	memcpy(wrqu.addr.sa_data, sta->addr, ETH_ALEN);
-	wrqu.addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(dev, IWEVEXPIRED, &wrqu, NULL);
-}
-
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-
-static void ap_handle_timer(struct timer_list *t)
-{
-	struct sta_info *sta = from_timer(sta, t, timer);
-	local_info_t *local;
-	struct ap_data *ap;
-	unsigned long next_time = 0;
-	int was_assoc;
-
-	if (sta == NULL || sta->local == NULL || sta->local->ap == NULL) {
-		PDEBUG(DEBUG_AP, "ap_handle_timer() called with NULL data\n");
-		return;
-	}
-
-	local = sta->local;
-	ap = local->ap;
-	was_assoc = sta->flags & WLAN_STA_ASSOC;
-
-	if (atomic_read(&sta->users) != 0)
-		next_time = jiffies + HZ;
-	else if ((sta->flags & WLAN_STA_PERM) && !(sta->flags & WLAN_STA_AUTH))
-		next_time = jiffies + ap->max_inactivity;
-
-	if (time_before(jiffies, sta->last_rx + ap->max_inactivity)) {
-		/* station activity detected; reset timeout state */
-		sta->timeout_next = STA_NULLFUNC;
-		next_time = sta->last_rx + ap->max_inactivity;
-	} else if (sta->timeout_next == STA_DISASSOC &&
-		   !(sta->flags & WLAN_STA_PENDING_POLL)) {
-		/* STA ACKed data nullfunc frame poll */
-		sta->timeout_next = STA_NULLFUNC;
-		next_time = jiffies + ap->max_inactivity;
-	}
-
-	if (next_time) {
-		sta->timer.expires = next_time;
-		add_timer(&sta->timer);
-		return;
-	}
-
-	if (sta->ap)
-		sta->timeout_next = STA_DEAUTH;
-
-	if (sta->timeout_next == STA_DEAUTH && !(sta->flags & WLAN_STA_PERM)) {
-		spin_lock(&ap->sta_table_lock);
-		ap_sta_hash_del(ap, sta);
-		list_del(&sta->list);
-		spin_unlock(&ap->sta_table_lock);
-		sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
-	} else if (sta->timeout_next == STA_DISASSOC)
-		sta->flags &= ~WLAN_STA_ASSOC;
-
-	if (was_assoc && !(sta->flags & WLAN_STA_ASSOC) && !sta->ap)
-		hostap_event_expired_sta(local->dev, sta);
-
-	if (sta->timeout_next == STA_DEAUTH && sta->aid > 0 &&
-	    !skb_queue_empty(&sta->tx_buf)) {
-		hostap_set_tim(local, sta->aid, 0);
-		sta->flags &= ~WLAN_STA_TIM;
-	}
-
-	if (sta->ap) {
-		if (ap->autom_ap_wds) {
-			PDEBUG(DEBUG_AP, "%s: removing automatic WDS "
-			       "connection to AP %pM\n",
-			       local->dev->name, sta->addr);
-			hostap_wds_link_oper(local, sta->addr, WDS_DEL);
-		}
-	} else if (sta->timeout_next == STA_NULLFUNC) {
-		/* send data frame to poll STA and check whether this frame
-		 * is ACKed */
-		/* FIX: IEEE80211_STYPE_NULLFUNC would be more appropriate, but
-		 * it is apparently not retried so TX Exc events are not
-		 * received for it */
-		sta->flags |= WLAN_STA_PENDING_POLL;
-		prism2_send_mgmt(local->dev, IEEE80211_FTYPE_DATA |
-				 IEEE80211_STYPE_DATA, NULL, 0,
-				 sta->addr, ap->tx_callback_poll);
-	} else {
-		int deauth = sta->timeout_next == STA_DEAUTH;
-		__le16 resp;
-		PDEBUG(DEBUG_AP, "%s: sending %s info to STA %pM"
-		       "(last=%lu, jiffies=%lu)\n",
-		       local->dev->name,
-		       deauth ? "deauthentication" : "disassociation",
-		       sta->addr, sta->last_rx, jiffies);
-
-		resp = cpu_to_le16(deauth ? WLAN_REASON_PREV_AUTH_NOT_VALID :
-				   WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
-		prism2_send_mgmt(local->dev, IEEE80211_FTYPE_MGMT |
-				 (deauth ? IEEE80211_STYPE_DEAUTH :
-				  IEEE80211_STYPE_DISASSOC),
-				 (char *) &resp, 2, sta->addr, 0);
-	}
-
-	if (sta->timeout_next == STA_DEAUTH) {
-		if (sta->flags & WLAN_STA_PERM) {
-			PDEBUG(DEBUG_AP, "%s: STA %pM"
-			       " would have been removed, "
-			       "but it has 'perm' flag\n",
-			       local->dev->name, sta->addr);
-		} else
-			ap_free_sta(ap, sta);
-		return;
-	}
-
-	if (sta->timeout_next == STA_NULLFUNC) {
-		sta->timeout_next = STA_DISASSOC;
-		sta->timer.expires = jiffies + AP_DISASSOC_DELAY;
-	} else {
-		sta->timeout_next = STA_DEAUTH;
-		sta->timer.expires = jiffies + AP_DEAUTH_DELAY;
-	}
-
-	add_timer(&sta->timer);
-}
-
-
-void hostap_deauth_all_stas(struct net_device *dev, struct ap_data *ap,
-			    int resend)
-{
-	u8 addr[ETH_ALEN];
-	__le16 resp;
-	int i;
-
-	PDEBUG(DEBUG_AP, "%s: Deauthenticate all stations\n", dev->name);
-	eth_broadcast_addr(addr);
-
-	resp = cpu_to_le16(WLAN_REASON_PREV_AUTH_NOT_VALID);
-
-	/* deauth message sent; try to resend it few times; the message is
-	 * broadcast, so it may be delayed until next DTIM; there is not much
-	 * else we can do at this point since the driver is going to be shut
-	 * down */
-	for (i = 0; i < 5; i++) {
-		prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT |
-				 IEEE80211_STYPE_DEAUTH,
-				 (char *) &resp, 2, addr, 0);
-
-		if (!resend || ap->num_sta <= 0)
-			return;
-
-		mdelay(50);
-	}
-}
-
-
-static int ap_control_proc_show(struct seq_file *m, void *v)
-{
-	struct ap_data *ap = pde_data(file_inode(m->file));
-	char *policy_txt;
-	struct mac_entry *entry;
-
-	if (v == SEQ_START_TOKEN) {
-		switch (ap->mac_restrictions.policy) {
-		case MAC_POLICY_OPEN:
-			policy_txt = "open";
-			break;
-		case MAC_POLICY_ALLOW:
-			policy_txt = "allow";
-			break;
-		case MAC_POLICY_DENY:
-			policy_txt = "deny";
-			break;
-		default:
-			policy_txt = "unknown";
-			break;
-		}
-		seq_printf(m, "MAC policy: %s\n", policy_txt);
-		seq_printf(m, "MAC entries: %u\n", ap->mac_restrictions.entries);
-		seq_puts(m, "MAC list:\n");
-		return 0;
-	}
-
-	entry = v;
-	seq_printf(m, "%pM\n", entry->addr);
-	return 0;
-}
-
-static void *ap_control_proc_start(struct seq_file *m, loff_t *_pos)
-{
-	struct ap_data *ap = pde_data(file_inode(m->file));
-	spin_lock_bh(&ap->mac_restrictions.lock);
-	return seq_list_start_head(&ap->mac_restrictions.mac_list, *_pos);
-}
-
-static void *ap_control_proc_next(struct seq_file *m, void *v, loff_t *_pos)
-{
-	struct ap_data *ap = pde_data(file_inode(m->file));
-	return seq_list_next(v, &ap->mac_restrictions.mac_list, _pos);
-}
-
-static void ap_control_proc_stop(struct seq_file *m, void *v)
-{
-	struct ap_data *ap = pde_data(file_inode(m->file));
-	spin_unlock_bh(&ap->mac_restrictions.lock);
-}
-
-static const struct seq_operations ap_control_proc_seqops = {
-	.start	= ap_control_proc_start,
-	.next	= ap_control_proc_next,
-	.stop	= ap_control_proc_stop,
-	.show	= ap_control_proc_show,
-};
-
-int ap_control_add_mac(struct mac_restrictions *mac_restrictions, u8 *mac)
-{
-	struct mac_entry *entry;
-
-	entry = kmalloc(sizeof(struct mac_entry), GFP_KERNEL);
-	if (entry == NULL)
-		return -ENOMEM;
-
-	memcpy(entry->addr, mac, ETH_ALEN);
-
-	spin_lock_bh(&mac_restrictions->lock);
-	list_add_tail(&entry->list, &mac_restrictions->mac_list);
-	mac_restrictions->entries++;
-	spin_unlock_bh(&mac_restrictions->lock);
-
-	return 0;
-}
-
-
-int ap_control_del_mac(struct mac_restrictions *mac_restrictions, u8 *mac)
-{
-	struct list_head *ptr;
-	struct mac_entry *entry;
-
-	spin_lock_bh(&mac_restrictions->lock);
-	for (ptr = mac_restrictions->mac_list.next;
-	     ptr != &mac_restrictions->mac_list; ptr = ptr->next) {
-		entry = list_entry(ptr, struct mac_entry, list);
-
-		if (ether_addr_equal(entry->addr, mac)) {
-			list_del(ptr);
-			kfree(entry);
-			mac_restrictions->entries--;
-			spin_unlock_bh(&mac_restrictions->lock);
-			return 0;
-		}
-	}
-	spin_unlock_bh(&mac_restrictions->lock);
-	return -1;
-}
-
-
-static int ap_control_mac_deny(struct mac_restrictions *mac_restrictions,
-			       u8 *mac)
-{
-	struct mac_entry *entry;
-	int found = 0;
-
-	if (mac_restrictions->policy == MAC_POLICY_OPEN)
-		return 0;
-
-	spin_lock_bh(&mac_restrictions->lock);
-	list_for_each_entry(entry, &mac_restrictions->mac_list, list) {
-		if (ether_addr_equal(entry->addr, mac)) {
-			found = 1;
-			break;
-		}
-	}
-	spin_unlock_bh(&mac_restrictions->lock);
-
-	if (mac_restrictions->policy == MAC_POLICY_ALLOW)
-		return !found;
-	else
-		return found;
-}
-
-
-void ap_control_flush_macs(struct mac_restrictions *mac_restrictions)
-{
-	struct list_head *ptr, *n;
-	struct mac_entry *entry;
-
-	if (mac_restrictions->entries == 0)
-		return;
-
-	spin_lock_bh(&mac_restrictions->lock);
-	for (ptr = mac_restrictions->mac_list.next, n = ptr->next;
-	     ptr != &mac_restrictions->mac_list;
-	     ptr = n, n = ptr->next) {
-		entry = list_entry(ptr, struct mac_entry, list);
-		list_del(ptr);
-		kfree(entry);
-	}
-	mac_restrictions->entries = 0;
-	spin_unlock_bh(&mac_restrictions->lock);
-}
-
-
-int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, u8 *mac)
-{
-	struct sta_info *sta;
-	__le16 resp;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, mac);
-	if (sta) {
-		ap_sta_hash_del(ap, sta);
-		list_del(&sta->list);
-	}
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	if (!sta)
-		return -EINVAL;
-
-	resp = cpu_to_le16(WLAN_REASON_PREV_AUTH_NOT_VALID);
-	prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH,
-			 (char *) &resp, 2, sta->addr, 0);
-
-	if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap)
-		hostap_event_expired_sta(dev, sta);
-
-	ap_free_sta(ap, sta);
-
-	return 0;
-}
-
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-
-void ap_control_kickall(struct ap_data *ap)
-{
-	struct list_head *ptr, *n;
-	struct sta_info *sta;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	for (ptr = ap->sta_list.next, n = ptr->next; ptr != &ap->sta_list;
-	     ptr = n, n = ptr->next) {
-		sta = list_entry(ptr, struct sta_info, list);
-		ap_sta_hash_del(ap, sta);
-		list_del(&sta->list);
-		if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local)
-			hostap_event_expired_sta(sta->local->dev, sta);
-		ap_free_sta(ap, sta);
-	}
-	spin_unlock_bh(&ap->sta_table_lock);
-}
-
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-
-static int prism2_ap_proc_show(struct seq_file *m, void *v)
-{
-	struct sta_info *sta = v;
-	int i;
-
-	if (v == SEQ_START_TOKEN) {
-		seq_printf(m, "# BSSID CHAN SIGNAL NOISE RATE SSID FLAGS\n");
-		return 0;
-	}
-
-	if (!sta->ap)
-		return 0;
-
-	seq_printf(m, "%pM %d %d %d %d '",
-		   sta->addr,
-		   sta->u.ap.channel, sta->last_rx_signal,
-		   sta->last_rx_silence, sta->last_rx_rate);
-
-	for (i = 0; i < sta->u.ap.ssid_len; i++) {
-		if (sta->u.ap.ssid[i] >= 32 && sta->u.ap.ssid[i] < 127)
-			seq_putc(m, sta->u.ap.ssid[i]);
-		else
-			seq_printf(m, "<%02x>", sta->u.ap.ssid[i]);
-	}
-
-	seq_putc(m, '\'');
-	if (sta->capability & WLAN_CAPABILITY_ESS)
-		seq_puts(m, " [ESS]");
-	if (sta->capability & WLAN_CAPABILITY_IBSS)
-		seq_puts(m, " [IBSS]");
-	if (sta->capability & WLAN_CAPABILITY_PRIVACY)
-		seq_puts(m, " [WEP]");
-	seq_putc(m, '\n');
-	return 0;
-}
-
-static void *prism2_ap_proc_start(struct seq_file *m, loff_t *_pos)
-{
-	struct ap_data *ap = pde_data(file_inode(m->file));
-	spin_lock_bh(&ap->sta_table_lock);
-	return seq_list_start_head(&ap->sta_list, *_pos);
-}
-
-static void *prism2_ap_proc_next(struct seq_file *m, void *v, loff_t *_pos)
-{
-	struct ap_data *ap = pde_data(file_inode(m->file));
-	return seq_list_next(v, &ap->sta_list, _pos);
-}
-
-static void prism2_ap_proc_stop(struct seq_file *m, void *v)
-{
-	struct ap_data *ap = pde_data(file_inode(m->file));
-	spin_unlock_bh(&ap->sta_table_lock);
-}
-
-static const struct seq_operations prism2_ap_proc_seqops = {
-	.start	= prism2_ap_proc_start,
-	.next	= prism2_ap_proc_next,
-	.stop	= prism2_ap_proc_stop,
-	.show	= prism2_ap_proc_show,
-};
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-
-void hostap_check_sta_fw_version(struct ap_data *ap, int sta_fw_ver)
-{
-	if (!ap)
-		return;
-
-	if (sta_fw_ver == PRISM2_FW_VER(0,8,0)) {
-		PDEBUG(DEBUG_AP, "Using data::nullfunc ACK workaround - "
-		       "firmware upgrade recommended\n");
-		ap->nullfunc_ack = 1;
-	} else
-		ap->nullfunc_ack = 0;
-
-	if (sta_fw_ver == PRISM2_FW_VER(1,4,2)) {
-		printk(KERN_WARNING "%s: Warning: secondary station firmware "
-		       "version 1.4.2 does not seem to work in Host AP mode\n",
-		       ap->local->dev->name);
-	}
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void hostap_ap_tx_cb(struct sk_buff *skb, int ok, void *data)
-{
-	struct ap_data *ap = data;
-	struct ieee80211_hdr *hdr;
-
-	if (!ap->local->hostapd || !ap->local->apdev) {
-		dev_kfree_skb(skb);
-		return;
-	}
-
-	/* Pass the TX callback frame to the hostapd; use 802.11 header version
-	 * 1 to indicate failure (no ACK) and 2 success (frame ACKed) */
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_VERS);
-	hdr->frame_control |= cpu_to_le16(ok ? BIT(1) : BIT(0));
-
-	skb->dev = ap->local->apdev;
-	skb_pull(skb, hostap_80211_get_hdrlen(hdr->frame_control));
-	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = cpu_to_be16(ETH_P_802_2);
-	memset(skb->cb, 0, sizeof(skb->cb));
-	netif_rx(skb);
-}
-
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-/* Called only as a tasklet (software IRQ) */
-static void hostap_ap_tx_cb_auth(struct sk_buff *skb, int ok, void *data)
-{
-	struct ap_data *ap = data;
-	struct net_device *dev = ap->local->dev;
-	struct ieee80211_hdr *hdr;
-	u16 auth_alg, auth_transaction, status;
-	__le16 *pos;
-	struct sta_info *sta = NULL;
-	char *txt = NULL;
-
-	if (ap->local->hostapd) {
-		dev_kfree_skb(skb);
-		return;
-	}
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	if (!ieee80211_is_auth(hdr->frame_control) ||
-	    skb->len < IEEE80211_MGMT_HDR_LEN + 6) {
-		printk(KERN_DEBUG "%s: hostap_ap_tx_cb_auth received invalid "
-		       "frame\n", dev->name);
-		dev_kfree_skb(skb);
-		return;
-	}
-
-	pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN);
-	auth_alg = le16_to_cpu(*pos++);
-	auth_transaction = le16_to_cpu(*pos++);
-	status = le16_to_cpu(*pos++);
-
-	if (!ok) {
-		txt = "frame was not ACKed";
-		goto done;
-	}
-
-	spin_lock(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, hdr->addr1);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock(&ap->sta_table_lock);
-
-	if (!sta) {
-		txt = "STA not found";
-		goto done;
-	}
-
-	if (status == WLAN_STATUS_SUCCESS &&
-	    ((auth_alg == WLAN_AUTH_OPEN && auth_transaction == 2) ||
-	     (auth_alg == WLAN_AUTH_SHARED_KEY && auth_transaction == 4))) {
-		txt = "STA authenticated";
-		sta->flags |= WLAN_STA_AUTH;
-		sta->last_auth = jiffies;
-	} else if (status != WLAN_STATUS_SUCCESS)
-		txt = "authentication failed";
-
- done:
-	if (sta)
-		atomic_dec(&sta->users);
-	if (txt) {
-		PDEBUG(DEBUG_AP, "%s: %pM auth_cb - alg=%d "
-		       "trans#=%d status=%d - %s\n",
-		       dev->name, hdr->addr1,
-		       auth_alg, auth_transaction, status, txt);
-	}
-	dev_kfree_skb(skb);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data)
-{
-	struct ap_data *ap = data;
-	struct net_device *dev = ap->local->dev;
-	struct ieee80211_hdr *hdr;
-	u16 status;
-	__le16 *pos;
-	struct sta_info *sta = NULL;
-	char *txt = NULL;
-
-	if (ap->local->hostapd) {
-		dev_kfree_skb(skb);
-		return;
-	}
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	if ((!ieee80211_is_assoc_resp(hdr->frame_control) &&
-	     !ieee80211_is_reassoc_resp(hdr->frame_control)) ||
-	    skb->len < IEEE80211_MGMT_HDR_LEN + 4) {
-		printk(KERN_DEBUG "%s: hostap_ap_tx_cb_assoc received invalid "
-		       "frame\n", dev->name);
-		dev_kfree_skb(skb);
-		return;
-	}
-
-	if (!ok) {
-		txt = "frame was not ACKed";
-		goto done;
-	}
-
-	spin_lock(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, hdr->addr1);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock(&ap->sta_table_lock);
-
-	if (!sta) {
-		txt = "STA not found";
-		goto done;
-	}
-
-	pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN);
-	pos++;
-	status = le16_to_cpu(*pos++);
-	if (status == WLAN_STATUS_SUCCESS) {
-		if (!(sta->flags & WLAN_STA_ASSOC))
-			hostap_event_new_sta(dev, sta);
-		txt = "STA associated";
-		sta->flags |= WLAN_STA_ASSOC;
-		sta->last_assoc = jiffies;
-	} else
-		txt = "association failed";
-
- done:
-	if (sta)
-		atomic_dec(&sta->users);
-	if (txt) {
-		PDEBUG(DEBUG_AP, "%s: %pM assoc_cb - %s\n",
-		       dev->name, hdr->addr1, txt);
-	}
-	dev_kfree_skb(skb);
-}
-
-/* Called only as a tasklet (software IRQ); TX callback for poll frames used
- * in verifying whether the STA is still present. */
-static void hostap_ap_tx_cb_poll(struct sk_buff *skb, int ok, void *data)
-{
-	struct ap_data *ap = data;
-	struct ieee80211_hdr *hdr;
-	struct sta_info *sta;
-
-	if (skb->len < 24)
-		goto fail;
-	hdr = (struct ieee80211_hdr *) skb->data;
-	if (ok) {
-		spin_lock(&ap->sta_table_lock);
-		sta = ap_get_sta(ap, hdr->addr1);
-		if (sta)
-			sta->flags &= ~WLAN_STA_PENDING_POLL;
-		spin_unlock(&ap->sta_table_lock);
-	} else {
-		PDEBUG(DEBUG_AP,
-		       "%s: STA %pM did not ACK activity poll frame\n",
-		       ap->local->dev->name, hdr->addr1);
-	}
-
- fail:
-	dev_kfree_skb(skb);
-}
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-
-void hostap_init_data(local_info_t *local)
-{
-	struct ap_data *ap = local->ap;
-
-	if (ap == NULL) {
-		printk(KERN_WARNING "hostap_init_data: ap == NULL\n");
-		return;
-	}
-	memset(ap, 0, sizeof(struct ap_data));
-	ap->local = local;
-
-	ap->ap_policy = GET_INT_PARM(other_ap_policy, local->card_idx);
-	ap->bridge_packets = GET_INT_PARM(ap_bridge_packets, local->card_idx);
-	ap->max_inactivity =
-		GET_INT_PARM(ap_max_inactivity, local->card_idx) * HZ;
-	ap->autom_ap_wds = GET_INT_PARM(autom_ap_wds, local->card_idx);
-
-	spin_lock_init(&ap->sta_table_lock);
-	INIT_LIST_HEAD(&ap->sta_list);
-
-	/* Initialize task queue structure for AP management */
-	INIT_WORK(&local->ap->add_sta_proc_queue, handle_add_proc_queue);
-
-	ap->tx_callback_idx =
-		hostap_tx_callback_register(local, hostap_ap_tx_cb, ap);
-	if (ap->tx_callback_idx == 0)
-		printk(KERN_WARNING "%s: failed to register TX callback for "
-		       "AP\n", local->dev->name);
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	INIT_WORK(&local->ap->wds_oper_queue, handle_wds_oper_queue);
-
-	ap->tx_callback_auth =
-		hostap_tx_callback_register(local, hostap_ap_tx_cb_auth, ap);
-	ap->tx_callback_assoc =
-		hostap_tx_callback_register(local, hostap_ap_tx_cb_assoc, ap);
-	ap->tx_callback_poll =
-		hostap_tx_callback_register(local, hostap_ap_tx_cb_poll, ap);
-	if (ap->tx_callback_auth == 0 || ap->tx_callback_assoc == 0 ||
-		ap->tx_callback_poll == 0)
-		printk(KERN_WARNING "%s: failed to register TX callback for "
-		       "AP\n", local->dev->name);
-
-	spin_lock_init(&ap->mac_restrictions.lock);
-	INIT_LIST_HEAD(&ap->mac_restrictions.mac_list);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-	ap->initialized = 1;
-}
-
-
-void hostap_init_ap_proc(local_info_t *local)
-{
-	struct ap_data *ap = local->ap;
-
-	ap->proc = local->proc;
-	if (ap->proc == NULL)
-		return;
-
-#ifndef PRISM2_NO_PROCFS_DEBUG
-	proc_create_single_data("ap_debug", 0, ap->proc, ap_debug_proc_show, ap);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	proc_create_seq_data("ap_control", 0, ap->proc, &ap_control_proc_seqops,
-			ap);
-	proc_create_seq_data("ap", 0, ap->proc, &prism2_ap_proc_seqops, ap);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-}
-
-
-void hostap_free_data(struct ap_data *ap)
-{
-	struct sta_info *n, *sta;
-
-	if (ap == NULL || !ap->initialized) {
-		printk(KERN_DEBUG "hostap_free_data: ap has not yet been "
-		       "initialized - skip resource freeing\n");
-		return;
-	}
-
-	flush_work(&ap->add_sta_proc_queue);
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	flush_work(&ap->wds_oper_queue);
-	if (ap->crypt)
-		ap->crypt->deinit(ap->crypt_priv);
-	ap->crypt = ap->crypt_priv = NULL;
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-	list_for_each_entry_safe(sta, n, &ap->sta_list, list) {
-		ap_sta_hash_del(ap, sta);
-		list_del(&sta->list);
-		if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local)
-			hostap_event_expired_sta(sta->local->dev, sta);
-		ap_free_sta(ap, sta);
-	}
-
-#ifndef PRISM2_NO_PROCFS_DEBUG
-	if (ap->proc != NULL) {
-		remove_proc_entry("ap_debug", ap->proc);
-	}
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	if (ap->proc != NULL) {
-	  remove_proc_entry("ap", ap->proc);
-		remove_proc_entry("ap_control", ap->proc);
-	}
-	ap_control_flush_macs(&ap->mac_restrictions);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-	ap->initialized = 0;
-}
-
-
-/* caller should have mutex for AP STA list handling */
-static struct sta_info* ap_get_sta(struct ap_data *ap, u8 *sta)
-{
-	struct sta_info *s;
-
-	s = ap->sta_hash[STA_HASH(sta)];
-	while (s != NULL && !ether_addr_equal(s->addr, sta))
-		s = s->hnext;
-	return s;
-}
-
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-
-/* Called from timer handler and from scheduled AP queue handlers */
-static void prism2_send_mgmt(struct net_device *dev,
-			     u16 type_subtype, char *body,
-			     int body_len, u8 *addr, u16 tx_cb_idx)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct ieee80211_hdr *hdr;
-	u16 fc;
-	struct sk_buff *skb;
-	struct hostap_skb_tx_data *meta;
-	int hdrlen;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	dev = local->dev; /* always use master radio device */
-	iface = netdev_priv(dev);
-
-	if (!(dev->flags & IFF_UP)) {
-		PDEBUG(DEBUG_AP, "%s: prism2_send_mgmt - device is not UP - "
-		       "cannot send frame\n", dev->name);
-		return;
-	}
-
-	skb = dev_alloc_skb(sizeof(*hdr) + body_len);
-	if (skb == NULL) {
-		PDEBUG(DEBUG_AP, "%s: prism2_send_mgmt failed to allocate "
-		       "skb\n", dev->name);
-		return;
-	}
-
-	fc = type_subtype;
-	hdrlen = hostap_80211_get_hdrlen(cpu_to_le16(type_subtype));
-	hdr = skb_put_zero(skb, hdrlen);
-	if (body)
-		skb_put_data(skb, body, body_len);
-
-	/* FIX: ctrl::ack sending used special HFA384X_TX_CTRL_802_11
-	 * tx_control instead of using local->tx_control */
-
-
-	memcpy(hdr->addr1, addr, ETH_ALEN); /* DA / RA */
-	if (ieee80211_is_data(hdr->frame_control)) {
-		fc |= IEEE80211_FCTL_FROMDS;
-		memcpy(hdr->addr2, dev->dev_addr, ETH_ALEN); /* BSSID */
-		memcpy(hdr->addr3, dev->dev_addr, ETH_ALEN); /* SA */
-	} else if (ieee80211_is_ctl(hdr->frame_control)) {
-		/* control:ACK does not have addr2 or addr3 */
-		eth_zero_addr(hdr->addr2);
-		eth_zero_addr(hdr->addr3);
-	} else {
-		memcpy(hdr->addr2, dev->dev_addr, ETH_ALEN); /* SA */
-		memcpy(hdr->addr3, dev->dev_addr, ETH_ALEN); /* BSSID */
-	}
-
-	hdr->frame_control = cpu_to_le16(fc);
-
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-	memset(meta, 0, sizeof(*meta));
-	meta->magic = HOSTAP_SKB_TX_DATA_MAGIC;
-	meta->iface = iface;
-	meta->tx_cb_idx = tx_cb_idx;
-
-	skb->dev = dev;
-	skb_reset_mac_header(skb);
-	skb_reset_network_header(skb);
-	dev_queue_xmit(skb);
-}
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-#ifdef CONFIG_PROC_FS
-static int prism2_sta_proc_show(struct seq_file *m, void *v)
-{
-	struct sta_info *sta = m->private;
-	int i;
-
-	/* FIX: possible race condition.. the STA data could have just expired,
-	 * but proc entry was still here so that the read could have started;
-	 * some locking should be done here.. */
-
-	seq_printf(m,
-		   "%s=%pM\nusers=%d\naid=%d\n"
-		   "flags=0x%04x%s%s%s%s%s%s%s\n"
-		   "capability=0x%02x\nlisten_interval=%d\nsupported_rates=",
-		   sta->ap ? "AP" : "STA",
-		   sta->addr, atomic_read(&sta->users), sta->aid,
-		   sta->flags,
-		   sta->flags & WLAN_STA_AUTH ? " AUTH" : "",
-		   sta->flags & WLAN_STA_ASSOC ? " ASSOC" : "",
-		   sta->flags & WLAN_STA_PS ? " PS" : "",
-		   sta->flags & WLAN_STA_TIM ? " TIM" : "",
-		   sta->flags & WLAN_STA_PERM ? " PERM" : "",
-		   sta->flags & WLAN_STA_AUTHORIZED ? " AUTHORIZED" : "",
-		   sta->flags & WLAN_STA_PENDING_POLL ? " POLL" : "",
-		   sta->capability, sta->listen_interval);
-	/* supported_rates: 500 kbit/s units with msb ignored */
-	for (i = 0; i < sizeof(sta->supported_rates); i++)
-		if (sta->supported_rates[i] != 0)
-			seq_printf(m, "%d%sMbps ",
-				   (sta->supported_rates[i] & 0x7f) / 2,
-				   sta->supported_rates[i] & 1 ? ".5" : "");
-	seq_printf(m,
-		   "\njiffies=%lu\nlast_auth=%lu\nlast_assoc=%lu\n"
-		   "last_rx=%lu\nlast_tx=%lu\nrx_packets=%lu\n"
-		   "tx_packets=%lu\n"
-		   "rx_bytes=%lu\ntx_bytes=%lu\nbuffer_count=%d\n"
-		   "last_rx: silence=%d dBm signal=%d dBm rate=%d%s Mbps\n"
-		   "tx_rate=%d\ntx[1M]=%d\ntx[2M]=%d\ntx[5.5M]=%d\n"
-		   "tx[11M]=%d\n"
-		   "rx[1M]=%d\nrx[2M]=%d\nrx[5.5M]=%d\nrx[11M]=%d\n",
-		   jiffies, sta->last_auth, sta->last_assoc, sta->last_rx,
-		   sta->last_tx,
-		   sta->rx_packets, sta->tx_packets, sta->rx_bytes,
-		   sta->tx_bytes, skb_queue_len(&sta->tx_buf),
-		   sta->last_rx_silence,
-		   sta->last_rx_signal, sta->last_rx_rate / 10,
-		   sta->last_rx_rate % 10 ? ".5" : "",
-		   sta->tx_rate, sta->tx_count[0], sta->tx_count[1],
-		   sta->tx_count[2], sta->tx_count[3],  sta->rx_count[0],
-		   sta->rx_count[1], sta->rx_count[2], sta->rx_count[3]);
-	if (sta->crypt && sta->crypt->ops && sta->crypt->ops->print_stats)
-		sta->crypt->ops->print_stats(m, sta->crypt->priv);
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	if (sta->ap) {
-		if (sta->u.ap.channel >= 0)
-			seq_printf(m, "channel=%d\n", sta->u.ap.channel);
-		seq_puts(m, "ssid=");
-		for (i = 0; i < sta->u.ap.ssid_len; i++) {
-			if (sta->u.ap.ssid[i] >= 32 && sta->u.ap.ssid[i] < 127)
-				seq_putc(m, sta->u.ap.ssid[i]);
-			else
-				seq_printf(m, "<%02x>", sta->u.ap.ssid[i]);
-		}
-		seq_putc(m, '\n');
-	}
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-	return 0;
-}
-#endif
-
-static void handle_add_proc_queue(struct work_struct *work)
-{
-	struct ap_data *ap = container_of(work, struct ap_data,
-					  add_sta_proc_queue);
-	struct sta_info *sta;
-	char name[20];
-	struct add_sta_proc_data *entry, *prev;
-
-	entry = ap->add_sta_proc_entries;
-	ap->add_sta_proc_entries = NULL;
-
-	while (entry) {
-		spin_lock_bh(&ap->sta_table_lock);
-		sta = ap_get_sta(ap, entry->addr);
-		if (sta)
-			atomic_inc(&sta->users);
-		spin_unlock_bh(&ap->sta_table_lock);
-
-		if (sta) {
-			sprintf(name, "%pM", sta->addr);
-			sta->proc = proc_create_single_data(
-				name, 0, ap->proc,
-				prism2_sta_proc_show, sta);
-
-			atomic_dec(&sta->users);
-		}
-
-		prev = entry;
-		entry = entry->next;
-		kfree(prev);
-	}
-}
-
-
-static struct sta_info * ap_add_sta(struct ap_data *ap, u8 *addr)
-{
-	struct sta_info *sta;
-
-	sta = kzalloc(sizeof(struct sta_info), GFP_ATOMIC);
-	if (sta == NULL) {
-		PDEBUG(DEBUG_AP, "AP: kmalloc failed\n");
-		return NULL;
-	}
-
-	/* initialize STA info data */
-	sta->local = ap->local;
-	skb_queue_head_init(&sta->tx_buf);
-	memcpy(sta->addr, addr, ETH_ALEN);
-
-	atomic_inc(&sta->users);
-	spin_lock_bh(&ap->sta_table_lock);
-	list_add(&sta->list, &ap->sta_list);
-	ap->num_sta++;
-	ap_sta_hash_add(ap, sta);
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	if (ap->proc) {
-		struct add_sta_proc_data *entry;
-		/* schedule a non-interrupt context process to add a procfs
-		 * entry for the STA since procfs code use GFP_KERNEL */
-		entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
-		if (entry) {
-			memcpy(entry->addr, sta->addr, ETH_ALEN);
-			entry->next = ap->add_sta_proc_entries;
-			ap->add_sta_proc_entries = entry;
-			schedule_work(&ap->add_sta_proc_queue);
-		} else
-			printk(KERN_DEBUG "Failed to add STA proc data\n");
-	}
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	timer_setup(&sta->timer, ap_handle_timer, 0);
-	sta->timer.expires = jiffies + ap->max_inactivity;
-	if (!ap->local->hostapd)
-		add_timer(&sta->timer);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-	return sta;
-}
-
-
-static int ap_tx_rate_ok(int rateidx, struct sta_info *sta,
-			 local_info_t *local)
-{
-	if (rateidx > sta->tx_max_rate ||
-	    !(sta->tx_supp_rates & (1 << rateidx)))
-		return 0;
-
-	if (local->tx_rate_control != 0 &&
-	    !(local->tx_rate_control & (1 << rateidx)))
-		return 0;
-
-	return 1;
-}
-
-
-static void prism2_check_tx_rates(struct sta_info *sta)
-{
-	int i;
-
-	sta->tx_supp_rates = 0;
-	for (i = 0; i < sizeof(sta->supported_rates); i++) {
-		if ((sta->supported_rates[i] & 0x7f) == 2)
-			sta->tx_supp_rates |= WLAN_RATE_1M;
-		if ((sta->supported_rates[i] & 0x7f) == 4)
-			sta->tx_supp_rates |= WLAN_RATE_2M;
-		if ((sta->supported_rates[i] & 0x7f) == 11)
-			sta->tx_supp_rates |= WLAN_RATE_5M5;
-		if ((sta->supported_rates[i] & 0x7f) == 22)
-			sta->tx_supp_rates |= WLAN_RATE_11M;
-	}
-	sta->tx_max_rate = sta->tx_rate = sta->tx_rate_idx = 0;
-	if (sta->tx_supp_rates & WLAN_RATE_1M) {
-		sta->tx_max_rate = 0;
-		if (ap_tx_rate_ok(0, sta, sta->local)) {
-			sta->tx_rate = 10;
-			sta->tx_rate_idx = 0;
-		}
-	}
-	if (sta->tx_supp_rates & WLAN_RATE_2M) {
-		sta->tx_max_rate = 1;
-		if (ap_tx_rate_ok(1, sta, sta->local)) {
-			sta->tx_rate = 20;
-			sta->tx_rate_idx = 1;
-		}
-	}
-	if (sta->tx_supp_rates & WLAN_RATE_5M5) {
-		sta->tx_max_rate = 2;
-		if (ap_tx_rate_ok(2, sta, sta->local)) {
-			sta->tx_rate = 55;
-			sta->tx_rate_idx = 2;
-		}
-	}
-	if (sta->tx_supp_rates & WLAN_RATE_11M) {
-		sta->tx_max_rate = 3;
-		if (ap_tx_rate_ok(3, sta, sta->local)) {
-			sta->tx_rate = 110;
-			sta->tx_rate_idx = 3;
-		}
-	}
-}
-
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-
-static void ap_crypt_init(struct ap_data *ap)
-{
-	ap->crypt = lib80211_get_crypto_ops("WEP");
-
-	if (ap->crypt) {
-		if (ap->crypt->init) {
-			ap->crypt_priv = ap->crypt->init(0);
-			if (ap->crypt_priv == NULL)
-				ap->crypt = NULL;
-			else {
-				u8 key[WEP_KEY_LEN];
-				get_random_bytes(key, WEP_KEY_LEN);
-				ap->crypt->set_key(key, WEP_KEY_LEN, NULL,
-						   ap->crypt_priv);
-			}
-		}
-	}
-
-	if (ap->crypt == NULL) {
-		printk(KERN_WARNING "AP could not initialize WEP: load module "
-		       "lib80211_crypt_wep.ko\n");
-	}
-}
-
-
-/* Generate challenge data for shared key authentication. IEEE 802.11 specifies
- * that WEP algorithm is used for generating challenge. This should be unique,
- * but otherwise there is not really need for randomness etc. Initialize WEP
- * with pseudo random key and then use increasing IV to get unique challenge
- * streams.
- *
- * Called only as a scheduled task for pending AP frames.
- */
-static char * ap_auth_make_challenge(struct ap_data *ap)
-{
-	char *tmpbuf;
-	struct sk_buff *skb;
-
-	if (ap->crypt == NULL) {
-		ap_crypt_init(ap);
-		if (ap->crypt == NULL)
-			return NULL;
-	}
-
-	tmpbuf = kmalloc(WLAN_AUTH_CHALLENGE_LEN, GFP_ATOMIC);
-	if (tmpbuf == NULL) {
-		PDEBUG(DEBUG_AP, "AP: kmalloc failed for challenge\n");
-		return NULL;
-	}
-
-	skb = dev_alloc_skb(WLAN_AUTH_CHALLENGE_LEN +
-			    ap->crypt->extra_mpdu_prefix_len +
-			    ap->crypt->extra_mpdu_postfix_len);
-	if (skb == NULL) {
-		kfree(tmpbuf);
-		return NULL;
-	}
-
-	skb_reserve(skb, ap->crypt->extra_mpdu_prefix_len);
-	skb_put_zero(skb, WLAN_AUTH_CHALLENGE_LEN);
-	if (ap->crypt->encrypt_mpdu(skb, 0, ap->crypt_priv)) {
-		dev_kfree_skb(skb);
-		kfree(tmpbuf);
-		return NULL;
-	}
-
-	skb_copy_from_linear_data_offset(skb, ap->crypt->extra_mpdu_prefix_len,
-					 tmpbuf, WLAN_AUTH_CHALLENGE_LEN);
-	dev_kfree_skb(skb);
-
-	return tmpbuf;
-}
-
-
-/* Called only as a scheduled task for pending AP frames. */
-static void handle_authen(local_info_t *local, struct sk_buff *skb,
-			  struct hostap_80211_rx_status *rx_stats)
-{
-	struct net_device *dev = local->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	size_t hdrlen;
-	struct ap_data *ap = local->ap;
-	char body[8 + WLAN_AUTH_CHALLENGE_LEN], *challenge = NULL;
-	int len, olen;
-	u16 auth_alg, auth_transaction, status_code;
-	__le16 *pos;
-	u16 resp = WLAN_STATUS_SUCCESS;
-	struct sta_info *sta = NULL;
-	struct lib80211_crypt_data *crypt;
-	char *txt = "";
-
-	len = skb->len - IEEE80211_MGMT_HDR_LEN;
-
-	hdrlen = hostap_80211_get_hdrlen(hdr->frame_control);
-
-	if (len < 6) {
-		PDEBUG(DEBUG_AP, "%s: handle_authen - too short payload "
-		       "(len=%d) from %pM\n", dev->name, len, hdr->addr2);
-		return;
-	}
-
-	spin_lock_bh(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock_bh(&local->ap->sta_table_lock);
-
-	if (sta && sta->crypt)
-		crypt = sta->crypt;
-	else {
-		int idx = 0;
-		if (skb->len >= hdrlen + 3)
-			idx = skb->data[hdrlen + 3] >> 6;
-		crypt = local->crypt_info.crypt[idx];
-	}
-
-	pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN);
-	auth_alg = __le16_to_cpu(*pos);
-	pos++;
-	auth_transaction = __le16_to_cpu(*pos);
-	pos++;
-	status_code = __le16_to_cpu(*pos);
-	pos++;
-
-	if (ether_addr_equal(dev->dev_addr, hdr->addr2) ||
-	    ap_control_mac_deny(&ap->mac_restrictions, hdr->addr2)) {
-		txt = "authentication denied";
-		resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
-		goto fail;
-	}
-
-	if (((local->auth_algs & PRISM2_AUTH_OPEN) &&
-	     auth_alg == WLAN_AUTH_OPEN) ||
-	    ((local->auth_algs & PRISM2_AUTH_SHARED_KEY) &&
-	     crypt && auth_alg == WLAN_AUTH_SHARED_KEY)) {
-	} else {
-		txt = "unsupported algorithm";
-		resp = WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG;
-		goto fail;
-	}
-
-	if (len >= 8) {
-		u8 *u = (u8 *) pos;
-		if (*u == WLAN_EID_CHALLENGE) {
-			if (*(u + 1) != WLAN_AUTH_CHALLENGE_LEN) {
-				txt = "invalid challenge len";
-				resp = WLAN_STATUS_CHALLENGE_FAIL;
-				goto fail;
-			}
-			if (len - 8 < WLAN_AUTH_CHALLENGE_LEN) {
-				txt = "challenge underflow";
-				resp = WLAN_STATUS_CHALLENGE_FAIL;
-				goto fail;
-			}
-			challenge = (char *) (u + 2);
-		}
-	}
-
-	if (sta && sta->ap) {
-		if (time_after(jiffies, sta->u.ap.last_beacon +
-			       (10 * sta->listen_interval * HZ) / 1024)) {
-			PDEBUG(DEBUG_AP, "%s: no beacons received for a while,"
-			       " assuming AP %pM is now STA\n",
-			       dev->name, sta->addr);
-			sta->ap = 0;
-			sta->flags = 0;
-			sta->u.sta.challenge = NULL;
-		} else {
-			txt = "AP trying to authenticate?";
-			resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
-			goto fail;
-		}
-	}
-
-	if ((auth_alg == WLAN_AUTH_OPEN && auth_transaction == 1) ||
-	    (auth_alg == WLAN_AUTH_SHARED_KEY &&
-	     (auth_transaction == 1 ||
-	      (auth_transaction == 3 && sta != NULL &&
-	       sta->u.sta.challenge != NULL)))) {
-	} else {
-		txt = "unknown authentication transaction number";
-		resp = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION;
-		goto fail;
-	}
-
-	if (sta == NULL) {
-		txt = "new STA";
-
-		if (local->ap->num_sta >= MAX_STA_COUNT) {
-			/* FIX: might try to remove some old STAs first? */
-			txt = "no more room for new STAs";
-			resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
-			goto fail;
-		}
-
-		sta = ap_add_sta(local->ap, hdr->addr2);
-		if (sta == NULL) {
-			txt = "ap_add_sta failed";
-			resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
-			goto fail;
-		}
-	}
-
-	switch (auth_alg) {
-	case WLAN_AUTH_OPEN:
-		txt = "authOK";
-		/* IEEE 802.11 standard is not completely clear about
-		 * whether STA is considered authenticated after
-		 * authentication OK frame has been send or after it
-		 * has been ACKed. In order to reduce interoperability
-		 * issues, mark the STA authenticated before ACK. */
-		sta->flags |= WLAN_STA_AUTH;
-		break;
-
-	case WLAN_AUTH_SHARED_KEY:
-		if (auth_transaction == 1) {
-			if (sta->u.sta.challenge == NULL) {
-				sta->u.sta.challenge =
-					ap_auth_make_challenge(local->ap);
-				if (sta->u.sta.challenge == NULL) {
-					resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
-					goto fail;
-				}
-			}
-		} else {
-			if (sta->u.sta.challenge == NULL ||
-			    challenge == NULL ||
-			    memcmp(sta->u.sta.challenge, challenge,
-				   WLAN_AUTH_CHALLENGE_LEN) != 0 ||
-			    !ieee80211_has_protected(hdr->frame_control)) {
-				txt = "challenge response incorrect";
-				resp = WLAN_STATUS_CHALLENGE_FAIL;
-				goto fail;
-			}
-
-			txt = "challenge OK - authOK";
-			/* IEEE 802.11 standard is not completely clear about
-			 * whether STA is considered authenticated after
-			 * authentication OK frame has been send or after it
-			 * has been ACKed. In order to reduce interoperability
-			 * issues, mark the STA authenticated before ACK. */
-			sta->flags |= WLAN_STA_AUTH;
-			kfree(sta->u.sta.challenge);
-			sta->u.sta.challenge = NULL;
-		}
-		break;
-	}
-
- fail:
-	pos = (__le16 *) body;
-	*pos = cpu_to_le16(auth_alg);
-	pos++;
-	*pos = cpu_to_le16(auth_transaction + 1);
-	pos++;
-	*pos = cpu_to_le16(resp); /* status_code */
-	pos++;
-	olen = 6;
-
-	if (resp == WLAN_STATUS_SUCCESS && sta != NULL &&
-	    sta->u.sta.challenge != NULL &&
-	    auth_alg == WLAN_AUTH_SHARED_KEY && auth_transaction == 1) {
-		u8 *tmp = (u8 *) pos;
-		*tmp++ = WLAN_EID_CHALLENGE;
-		*tmp++ = WLAN_AUTH_CHALLENGE_LEN;
-		pos++;
-		memcpy(pos, sta->u.sta.challenge, WLAN_AUTH_CHALLENGE_LEN);
-		olen += 2 + WLAN_AUTH_CHALLENGE_LEN;
-	}
-
-	prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH,
-			 body, olen, hdr->addr2, ap->tx_callback_auth);
-
-	if (sta) {
-		sta->last_rx = jiffies;
-		atomic_dec(&sta->users);
-	}
-
-	if (resp) {
-		PDEBUG(DEBUG_AP, "%s: %pM auth (alg=%d "
-		       "trans#=%d stat=%d len=%d fc=%04x) ==> %d (%s)\n",
-		       dev->name, hdr->addr2,
-		       auth_alg, auth_transaction, status_code, len,
-		       le16_to_cpu(hdr->frame_control), resp, txt);
-	}
-}
-
-
-/* Called only as a scheduled task for pending AP frames. */
-static void handle_assoc(local_info_t *local, struct sk_buff *skb,
-			 struct hostap_80211_rx_status *rx_stats, int reassoc)
-{
-	struct net_device *dev = local->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	char body[12], *p, *lpos;
-	int len, left;
-	__le16 *pos;
-	u16 resp = WLAN_STATUS_SUCCESS;
-	struct sta_info *sta = NULL;
-	int send_deauth = 0;
-	char __always_unused *txt = "";
-	u8 prev_ap[ETH_ALEN];
-
-	left = len = skb->len - IEEE80211_MGMT_HDR_LEN;
-
-	if (len < (reassoc ? 10 : 4)) {
-		PDEBUG(DEBUG_AP, "%s: handle_assoc - too short payload "
-		       "(len=%d, reassoc=%d) from %pM\n",
-		       dev->name, len, reassoc, hdr->addr2);
-		return;
-	}
-
-	spin_lock_bh(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta == NULL || (sta->flags & WLAN_STA_AUTH) == 0) {
-		spin_unlock_bh(&local->ap->sta_table_lock);
-		txt = "trying to associate before authentication";
-		send_deauth = 1;
-		resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
-		sta = NULL; /* do not decrement sta->users */
-		goto fail;
-	}
-	atomic_inc(&sta->users);
-	spin_unlock_bh(&local->ap->sta_table_lock);
-
-	pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN);
-	sta->capability = __le16_to_cpu(*pos);
-	pos++; left -= 2;
-	sta->listen_interval = __le16_to_cpu(*pos);
-	pos++; left -= 2;
-
-	if (reassoc) {
-		memcpy(prev_ap, pos, ETH_ALEN);
-		pos++; pos++; pos++; left -= 6;
-	} else
-		eth_zero_addr(prev_ap);
-
-	if (left >= 2) {
-		unsigned int ileft;
-		unsigned char *u = (unsigned char *) pos;
-
-		if (*u == WLAN_EID_SSID) {
-			u++; left--;
-			ileft = *u;
-			u++; left--;
-
-			if (ileft > left || ileft > MAX_SSID_LEN) {
-				txt = "SSID overflow";
-				resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
-				goto fail;
-			}
-
-			if (ileft != strlen(local->essid) ||
-			    memcmp(local->essid, u, ileft) != 0) {
-				txt = "not our SSID";
-				resp = WLAN_STATUS_ASSOC_DENIED_UNSPEC;
-				goto fail;
-			}
-
-			u += ileft;
-			left -= ileft;
-		}
-
-		if (left >= 2 && *u == WLAN_EID_SUPP_RATES) {
-			u++; left--;
-			ileft = *u;
-			u++; left--;
-
-			if (ileft > left || ileft == 0 ||
-			    ileft > WLAN_SUPP_RATES_MAX) {
-				txt = "SUPP_RATES len error";
-				resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
-				goto fail;
-			}
-
-			memset(sta->supported_rates, 0,
-			       sizeof(sta->supported_rates));
-			memcpy(sta->supported_rates, u, ileft);
-			prism2_check_tx_rates(sta);
-
-			u += ileft;
-			left -= ileft;
-		}
-
-		if (left > 0) {
-			PDEBUG(DEBUG_AP, "%s: assoc from %pM"
-			       " with extra data (%d bytes) [",
-			       dev->name, hdr->addr2, left);
-			while (left > 0) {
-				PDEBUG2(DEBUG_AP, "<%02x>", *u);
-				u++; left--;
-			}
-			PDEBUG2(DEBUG_AP, "]\n");
-		}
-	} else {
-		txt = "frame underflow";
-		resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
-		goto fail;
-	}
-
-	/* get a unique AID */
-	if (sta->aid > 0)
-		txt = "OK, old AID";
-	else {
-		spin_lock_bh(&local->ap->sta_table_lock);
-		for (sta->aid = 1; sta->aid <= MAX_AID_TABLE_SIZE; sta->aid++)
-			if (local->ap->sta_aid[sta->aid - 1] == NULL)
-				break;
-		if (sta->aid > MAX_AID_TABLE_SIZE) {
-			sta->aid = 0;
-			spin_unlock_bh(&local->ap->sta_table_lock);
-			resp = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA;
-			txt = "no room for more AIDs";
-		} else {
-			local->ap->sta_aid[sta->aid - 1] = sta;
-			spin_unlock_bh(&local->ap->sta_table_lock);
-			txt = "OK, new AID";
-		}
-	}
-
- fail:
-	pos = (__le16 *) body;
-
-	if (send_deauth) {
-		*pos = cpu_to_le16(WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH);
-		pos++;
-	} else {
-		/* FIX: CF-Pollable and CF-PollReq should be set to match the
-		 * values in beacons/probe responses */
-		/* FIX: how about privacy and WEP? */
-		/* capability */
-		*pos = cpu_to_le16(WLAN_CAPABILITY_ESS);
-		pos++;
-
-		/* status_code */
-		*pos = cpu_to_le16(resp);
-		pos++;
-
-		*pos = cpu_to_le16((sta && sta->aid > 0 ? sta->aid : 0) |
-				     BIT(14) | BIT(15)); /* AID */
-		pos++;
-
-		/* Supported rates (Information element) */
-		p = (char *) pos;
-		*p++ = WLAN_EID_SUPP_RATES;
-		lpos = p;
-		*p++ = 0; /* len */
-		if (local->tx_rate_control & WLAN_RATE_1M) {
-			*p++ = local->basic_rates & WLAN_RATE_1M ? 0x82 : 0x02;
-			(*lpos)++;
-		}
-		if (local->tx_rate_control & WLAN_RATE_2M) {
-			*p++ = local->basic_rates & WLAN_RATE_2M ? 0x84 : 0x04;
-			(*lpos)++;
-		}
-		if (local->tx_rate_control & WLAN_RATE_5M5) {
-			*p++ = local->basic_rates & WLAN_RATE_5M5 ?
-				0x8b : 0x0b;
-			(*lpos)++;
-		}
-		if (local->tx_rate_control & WLAN_RATE_11M) {
-			*p++ = local->basic_rates & WLAN_RATE_11M ?
-				0x96 : 0x16;
-			(*lpos)++;
-		}
-		pos = (__le16 *) p;
-	}
-
-	prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT |
-			 (send_deauth ? IEEE80211_STYPE_DEAUTH :
-			  (reassoc ? IEEE80211_STYPE_REASSOC_RESP :
-			   IEEE80211_STYPE_ASSOC_RESP)),
-			 body, (u8 *) pos - (u8 *) body,
-			 hdr->addr2,
-			 send_deauth ? 0 : local->ap->tx_callback_assoc);
-
-	if (sta) {
-		if (resp == WLAN_STATUS_SUCCESS) {
-			sta->last_rx = jiffies;
-			/* STA will be marked associated from TX callback, if
-			 * AssocResp is ACKed */
-		}
-		atomic_dec(&sta->users);
-	}
-
-#if 0
-	PDEBUG(DEBUG_AP, "%s: %pM %sassoc (len=%d "
-	       "prev_ap=%pM) => %d(%d) (%s)\n",
-	       dev->name,
-	       hdr->addr2,
-	       reassoc ? "re" : "", len,
-	       prev_ap,
-	       resp, send_deauth, txt);
-#endif
-}
-
-
-/* Called only as a scheduled task for pending AP frames. */
-static void handle_deauth(local_info_t *local, struct sk_buff *skb,
-			  struct hostap_80211_rx_status *rx_stats)
-{
-	struct net_device *dev = local->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	char *body = (char *) (skb->data + IEEE80211_MGMT_HDR_LEN);
-	int len;
-	u16 reason_code;
-	__le16 *pos;
-	struct sta_info *sta = NULL;
-
-	len = skb->len - IEEE80211_MGMT_HDR_LEN;
-
-	if (len < 2) {
-		printk("handle_deauth - too short payload (len=%d)\n", len);
-		return;
-	}
-
-	pos = (__le16 *) body;
-	reason_code = le16_to_cpu(*pos);
-
-	PDEBUG(DEBUG_AP, "%s: deauthentication: %pM len=%d, "
-	       "reason_code=%d\n", dev->name, hdr->addr2,
-	       len, reason_code);
-
-	spin_lock_bh(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta != NULL) {
-		if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap)
-			hostap_event_expired_sta(local->dev, sta);
-		sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
-	}
-	spin_unlock_bh(&local->ap->sta_table_lock);
-	if (sta == NULL) {
-		printk("%s: deauthentication from %pM, "
-	       "reason_code=%d, but STA not authenticated\n", dev->name,
-		       hdr->addr2, reason_code);
-	}
-}
-
-
-/* Called only as a scheduled task for pending AP frames. */
-static void handle_disassoc(local_info_t *local, struct sk_buff *skb,
-			    struct hostap_80211_rx_status *rx_stats)
-{
-	struct net_device *dev = local->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	char *body = skb->data + IEEE80211_MGMT_HDR_LEN;
-	int len;
-	u16 reason_code;
-	__le16 *pos;
-	struct sta_info *sta = NULL;
-
-	len = skb->len - IEEE80211_MGMT_HDR_LEN;
-
-	if (len < 2) {
-		printk("handle_disassoc - too short payload (len=%d)\n", len);
-		return;
-	}
-
-	pos = (__le16 *) body;
-	reason_code = le16_to_cpu(*pos);
-
-	PDEBUG(DEBUG_AP, "%s: disassociation: %pM len=%d, "
-	       "reason_code=%d\n", dev->name, hdr->addr2,
-	       len, reason_code);
-
-	spin_lock_bh(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta != NULL) {
-		if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap)
-			hostap_event_expired_sta(local->dev, sta);
-		sta->flags &= ~WLAN_STA_ASSOC;
-	}
-	spin_unlock_bh(&local->ap->sta_table_lock);
-	if (sta == NULL) {
-		printk("%s: disassociation from %pM, "
-		       "reason_code=%d, but STA not authenticated\n",
-		       dev->name, hdr->addr2, reason_code);
-	}
-}
-
-
-/* Called only as a scheduled task for pending AP frames. */
-static void ap_handle_data_nullfunc(local_info_t *local,
-				    struct ieee80211_hdr *hdr)
-{
-	struct net_device *dev = local->dev;
-
-	/* some STA f/w's seem to require control::ACK frame for
-	 * data::nullfunc, but at least Prism2 station f/w version 0.8.0 does
-	 * not send this..
-	 * send control::ACK for the data::nullfunc */
-
-	printk(KERN_DEBUG "Sending control::ACK for data::nullfunc\n");
-	prism2_send_mgmt(dev, IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK,
-			 NULL, 0, hdr->addr2, 0);
-}
-
-
-/* Called only as a scheduled task for pending AP frames. */
-static void ap_handle_dropped_data(local_info_t *local,
-				   struct ieee80211_hdr *hdr)
-{
-	struct net_device *dev = local->dev;
-	struct sta_info *sta;
-	__le16 reason;
-
-	spin_lock_bh(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock_bh(&local->ap->sta_table_lock);
-
-	if (sta != NULL && (sta->flags & WLAN_STA_ASSOC)) {
-		PDEBUG(DEBUG_AP, "ap_handle_dropped_data: STA is now okay?\n");
-		atomic_dec(&sta->users);
-		return;
-	}
-
-	reason = cpu_to_le16(WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA);
-	prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT |
-			 ((sta == NULL || !(sta->flags & WLAN_STA_ASSOC)) ?
-			  IEEE80211_STYPE_DEAUTH : IEEE80211_STYPE_DISASSOC),
-			 (char *) &reason, sizeof(reason), hdr->addr2, 0);
-
-	if (sta)
-		atomic_dec(&sta->users);
-}
-
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-
-/* Called only as a scheduled task for pending AP frames. */
-static void pspoll_send_buffered(local_info_t *local, struct sta_info *sta,
-				 struct sk_buff *skb)
-{
-	struct hostap_skb_tx_data *meta;
-
-	if (!(sta->flags & WLAN_STA_PS)) {
-		/* Station has moved to non-PS mode, so send all buffered
-		 * frames using normal device queue. */
-		dev_queue_xmit(skb);
-		return;
-	}
-
-	/* add a flag for hostap_handle_sta_tx() to know that this skb should
-	 * be passed through even though STA is using PS */
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-	meta->flags |= HOSTAP_TX_FLAGS_BUFFERED_FRAME;
-	if (!skb_queue_empty(&sta->tx_buf)) {
-		/* indicate to STA that more frames follow */
-		meta->flags |= HOSTAP_TX_FLAGS_ADD_MOREDATA;
-	}
-	dev_queue_xmit(skb);
-}
-
-
-/* Called only as a scheduled task for pending AP frames. */
-static void handle_pspoll(local_info_t *local,
-			  struct ieee80211_hdr *hdr,
-			  struct hostap_80211_rx_status *rx_stats)
-{
-	struct net_device *dev = local->dev;
-	struct sta_info *sta;
-	u16 aid;
-	struct sk_buff *skb;
-
-	PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=%pM, TA=%pM PWRMGT=%d\n",
-	       hdr->addr1, hdr->addr2, !!ieee80211_has_pm(hdr->frame_control));
-
-	if (!ether_addr_equal(hdr->addr1, dev->dev_addr)) {
-		PDEBUG(DEBUG_AP,
-		       "handle_pspoll - addr1(BSSID)=%pM not own MAC\n",
-		       hdr->addr1);
-		return;
-	}
-
-	aid = le16_to_cpu(hdr->duration_id);
-	if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) {
-		PDEBUG(DEBUG_PS, "   PSPOLL and AID[15:14] not set\n");
-		return;
-	}
-	aid &= ~(BIT(15) | BIT(14));
-	if (aid == 0 || aid > MAX_AID_TABLE_SIZE) {
-		PDEBUG(DEBUG_PS, "   invalid aid=%d\n", aid);
-		return;
-	}
-	PDEBUG(DEBUG_PS2, "   aid=%d\n", aid);
-
-	spin_lock_bh(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock_bh(&local->ap->sta_table_lock);
-
-	if (sta == NULL) {
-		PDEBUG(DEBUG_PS, "   STA not found\n");
-		return;
-	}
-	if (sta->aid != aid) {
-		PDEBUG(DEBUG_PS, "   received aid=%i does not match with "
-		       "assoc.aid=%d\n", aid, sta->aid);
-		return;
-	}
-
-	/* FIX: todo:
-	 * - add timeout for buffering (clear aid in TIM vector if buffer timed
-	 *   out (expiry time must be longer than ListenInterval for
-	 *   the corresponding STA; "8802-11: 11.2.1.9 AP aging function"
-	 * - what to do, if buffered, pspolled, and sent frame is not ACKed by
-	 *   sta; store buffer for later use and leave TIM aid bit set? use
-	 *   TX event to check whether frame was ACKed?
-	 */
-
-	while ((skb = skb_dequeue(&sta->tx_buf)) != NULL) {
-		/* send buffered frame .. */
-		PDEBUG(DEBUG_PS2, "Sending buffered frame to STA after PS POLL"
-		       " (buffer_count=%d)\n", skb_queue_len(&sta->tx_buf));
-
-		pspoll_send_buffered(local, sta, skb);
-
-		if (sta->flags & WLAN_STA_PS) {
-			/* send only one buffered packet per PS Poll */
-			/* FIX: should ignore further PS Polls until the
-			 * buffered packet that was just sent is acknowledged
-			 * (Tx or TxExc event) */
-			break;
-		}
-	}
-
-	if (skb_queue_empty(&sta->tx_buf)) {
-		/* try to clear aid from TIM */
-		if (!(sta->flags & WLAN_STA_TIM))
-			PDEBUG(DEBUG_PS2,  "Re-unsetting TIM for aid %d\n",
-			       aid);
-		hostap_set_tim(local, aid, 0);
-		sta->flags &= ~WLAN_STA_TIM;
-	}
-
-	atomic_dec(&sta->users);
-}
-
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-
-static void handle_wds_oper_queue(struct work_struct *work)
-{
-	struct ap_data *ap = container_of(work, struct ap_data,
-					  wds_oper_queue);
-	local_info_t *local = ap->local;
-	struct wds_oper_data *entry, *prev;
-
-	spin_lock_bh(&local->lock);
-	entry = local->ap->wds_oper_entries;
-	local->ap->wds_oper_entries = NULL;
-	spin_unlock_bh(&local->lock);
-
-	while (entry) {
-		PDEBUG(DEBUG_AP, "%s: %s automatic WDS connection "
-		       "to AP %pM\n",
-		       local->dev->name,
-		       entry->type == WDS_ADD ? "adding" : "removing",
-		       entry->addr);
-		if (entry->type == WDS_ADD)
-			prism2_wds_add(local, entry->addr, 0);
-		else if (entry->type == WDS_DEL)
-			prism2_wds_del(local, entry->addr, 0, 1);
-
-		prev = entry;
-		entry = entry->next;
-		kfree(prev);
-	}
-}
-
-
-/* Called only as a scheduled task for pending AP frames. */
-static void handle_beacon(local_info_t *local, struct sk_buff *skb,
-			  struct hostap_80211_rx_status *rx_stats)
-{
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	char *body = skb->data + IEEE80211_MGMT_HDR_LEN;
-	int len, left;
-	u16 beacon_int, capability;
-	__le16 *pos;
-	char *ssid = NULL;
-	unsigned char *supp_rates = NULL;
-	int ssid_len = 0, supp_rates_len = 0;
-	struct sta_info *sta = NULL;
-	int new_sta = 0, channel = -1;
-
-	len = skb->len - IEEE80211_MGMT_HDR_LEN;
-
-	if (len < 8 + 2 + 2) {
-		printk(KERN_DEBUG "handle_beacon - too short payload "
-		       "(len=%d)\n", len);
-		return;
-	}
-
-	pos = (__le16 *) body;
-	left = len;
-
-	/* Timestamp (8 octets) */
-	pos += 4; left -= 8;
-	/* Beacon interval (2 octets) */
-	beacon_int = le16_to_cpu(*pos);
-	pos++; left -= 2;
-	/* Capability information (2 octets) */
-	capability = le16_to_cpu(*pos);
-	pos++; left -= 2;
-
-	if (local->ap->ap_policy != AP_OTHER_AP_EVEN_IBSS &&
-	    capability & WLAN_CAPABILITY_IBSS)
-		return;
-
-	if (left >= 2) {
-		unsigned int ileft;
-		unsigned char *u = (unsigned char *) pos;
-
-		if (*u == WLAN_EID_SSID) {
-			u++; left--;
-			ileft = *u;
-			u++; left--;
-
-			if (ileft > left || ileft > MAX_SSID_LEN) {
-				PDEBUG(DEBUG_AP, "SSID: overflow\n");
-				return;
-			}
-
-			if (local->ap->ap_policy == AP_OTHER_AP_SAME_SSID &&
-			    (ileft != strlen(local->essid) ||
-			     memcmp(local->essid, u, ileft) != 0)) {
-				/* not our SSID */
-				return;
-			}
-
-			ssid = u;
-			ssid_len = ileft;
-
-			u += ileft;
-			left -= ileft;
-		}
-
-		if (*u == WLAN_EID_SUPP_RATES) {
-			u++; left--;
-			ileft = *u;
-			u++; left--;
-
-			if (ileft > left || ileft == 0 || ileft > 8) {
-				PDEBUG(DEBUG_AP, " - SUPP_RATES len error\n");
-				return;
-			}
-
-			supp_rates = u;
-			supp_rates_len = ileft;
-
-			u += ileft;
-			left -= ileft;
-		}
-
-		if (*u == WLAN_EID_DS_PARAMS) {
-			u++; left--;
-			ileft = *u;
-			u++; left--;
-
-			if (ileft > left || ileft != 1) {
-				PDEBUG(DEBUG_AP, " - DS_PARAMS len error\n");
-				return;
-			}
-
-			channel = *u;
-
-			u += ileft;
-			left -= ileft;
-		}
-	}
-
-	spin_lock_bh(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta != NULL)
-		atomic_inc(&sta->users);
-	spin_unlock_bh(&local->ap->sta_table_lock);
-
-	if (sta == NULL) {
-		/* add new AP */
-		new_sta = 1;
-		sta = ap_add_sta(local->ap, hdr->addr2);
-		if (sta == NULL) {
-			printk(KERN_INFO "prism2: kmalloc failed for AP "
-			       "data structure\n");
-			return;
-		}
-		hostap_event_new_sta(local->dev, sta);
-
-		/* mark APs authentication and associated for pseudo ad-hoc
-		 * style communication */
-		sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC;
-
-		if (local->ap->autom_ap_wds) {
-			hostap_wds_link_oper(local, sta->addr, WDS_ADD);
-		}
-	}
-
-	sta->ap = 1;
-	if (ssid) {
-		sta->u.ap.ssid_len = ssid_len;
-		memcpy(sta->u.ap.ssid, ssid, ssid_len);
-		sta->u.ap.ssid[ssid_len] = '\0';
-	} else {
-		sta->u.ap.ssid_len = 0;
-		sta->u.ap.ssid[0] = '\0';
-	}
-	sta->u.ap.channel = channel;
-	sta->rx_packets++;
-	sta->rx_bytes += len;
-	sta->u.ap.last_beacon = sta->last_rx = jiffies;
-	sta->capability = capability;
-	sta->listen_interval = beacon_int;
-
-	atomic_dec(&sta->users);
-
-	if (new_sta) {
-		memset(sta->supported_rates, 0, sizeof(sta->supported_rates));
-		memcpy(sta->supported_rates, supp_rates, supp_rates_len);
-		prism2_check_tx_rates(sta);
-	}
-}
-
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-
-/* Called only as a tasklet. */
-static void handle_ap_item(local_info_t *local, struct sk_buff *skb,
-			   struct hostap_80211_rx_status *rx_stats)
-{
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	struct net_device *dev = local->dev;
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-	u16 fc, type, stype;
-	struct ieee80211_hdr *hdr;
-
-	/* FIX: should give skb->len to handler functions and check that the
-	 * buffer is long enough */
-	hdr = (struct ieee80211_hdr *) skb->data;
-	fc = le16_to_cpu(hdr->frame_control);
-	type = fc & IEEE80211_FCTL_FTYPE;
-	stype = fc & IEEE80211_FCTL_STYPE;
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	if (!local->hostapd && type == IEEE80211_FTYPE_DATA) {
-		PDEBUG(DEBUG_AP, "handle_ap_item - data frame\n");
-
-		if (!(fc & IEEE80211_FCTL_TODS) ||
-		    (fc & IEEE80211_FCTL_FROMDS)) {
-			if (stype == IEEE80211_STYPE_NULLFUNC) {
-				/* no ToDS nullfunc seems to be used to check
-				 * AP association; so send reject message to
-				 * speed up re-association */
-				ap_handle_dropped_data(local, hdr);
-				goto done;
-			}
-			PDEBUG(DEBUG_AP, "   not ToDS frame (fc=0x%04x)\n",
-			       fc);
-			goto done;
-		}
-
-		if (!ether_addr_equal(hdr->addr1, dev->dev_addr)) {
-			PDEBUG(DEBUG_AP, "handle_ap_item - addr1(BSSID)=%pM"
-			       " not own MAC\n", hdr->addr1);
-			goto done;
-		}
-
-		if (local->ap->nullfunc_ack &&
-		    stype == IEEE80211_STYPE_NULLFUNC)
-			ap_handle_data_nullfunc(local, hdr);
-		else
-			ap_handle_dropped_data(local, hdr);
-		goto done;
-	}
-
-	if (type == IEEE80211_FTYPE_MGMT && stype == IEEE80211_STYPE_BEACON) {
-		handle_beacon(local, skb, rx_stats);
-		goto done;
-	}
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-	if (type == IEEE80211_FTYPE_CTL && stype == IEEE80211_STYPE_PSPOLL) {
-		handle_pspoll(local, hdr, rx_stats);
-		goto done;
-	}
-
-	if (local->hostapd) {
-		PDEBUG(DEBUG_AP, "Unknown frame in AP queue: type=0x%02x "
-		       "subtype=0x%02x\n", type, stype);
-		goto done;
-	}
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	if (type != IEEE80211_FTYPE_MGMT) {
-		PDEBUG(DEBUG_AP, "handle_ap_item - not a management frame?\n");
-		goto done;
-	}
-
-	if (!ether_addr_equal(hdr->addr1, dev->dev_addr)) {
-		PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=%pM"
-		       " not own MAC\n", hdr->addr1);
-		goto done;
-	}
-
-	if (!ether_addr_equal(hdr->addr3, dev->dev_addr)) {
-		PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=%pM"
-		       " not own MAC\n", hdr->addr3);
-		goto done;
-	}
-
-	switch (stype) {
-	case IEEE80211_STYPE_ASSOC_REQ:
-		handle_assoc(local, skb, rx_stats, 0);
-		break;
-	case IEEE80211_STYPE_ASSOC_RESP:
-		PDEBUG(DEBUG_AP, "==> ASSOC RESP (ignored)\n");
-		break;
-	case IEEE80211_STYPE_REASSOC_REQ:
-		handle_assoc(local, skb, rx_stats, 1);
-		break;
-	case IEEE80211_STYPE_REASSOC_RESP:
-		PDEBUG(DEBUG_AP, "==> REASSOC RESP (ignored)\n");
-		break;
-	case IEEE80211_STYPE_ATIM:
-		PDEBUG(DEBUG_AP, "==> ATIM (ignored)\n");
-		break;
-	case IEEE80211_STYPE_DISASSOC:
-		handle_disassoc(local, skb, rx_stats);
-		break;
-	case IEEE80211_STYPE_AUTH:
-		handle_authen(local, skb, rx_stats);
-		break;
-	case IEEE80211_STYPE_DEAUTH:
-		handle_deauth(local, skb, rx_stats);
-		break;
-	default:
-		PDEBUG(DEBUG_AP, "Unknown mgmt frame subtype 0x%02x\n",
-		       stype >> 4);
-		break;
-	}
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
- done:
-	dev_kfree_skb(skb);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-void hostap_rx(struct net_device *dev, struct sk_buff *skb,
-	       struct hostap_80211_rx_status *rx_stats)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct ieee80211_hdr *hdr;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (skb->len < 16)
-		goto drop;
-
-	dev->stats.rx_packets++;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-
-	if (local->ap->ap_policy == AP_OTHER_AP_SKIP_ALL &&
-	    ieee80211_is_beacon(hdr->frame_control))
-		goto drop;
-
-	skb->protocol = cpu_to_be16(ETH_P_HOSTAP);
-	handle_ap_item(local, skb, rx_stats);
-	return;
-
- drop:
-	dev_kfree_skb(skb);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void schedule_packet_send(local_info_t *local, struct sta_info *sta)
-{
-	struct sk_buff *skb;
-	struct ieee80211_hdr *hdr;
-	struct hostap_80211_rx_status rx_stats;
-
-	if (skb_queue_empty(&sta->tx_buf))
-		return;
-
-	skb = dev_alloc_skb(16);
-	if (skb == NULL) {
-		printk(KERN_DEBUG "%s: schedule_packet_send: skb alloc "
-		       "failed\n", local->dev->name);
-		return;
-	}
-
-	hdr = skb_put(skb, 16);
-
-	/* Generate a fake pspoll frame to start packet delivery */
-	hdr->frame_control = cpu_to_le16(
-		IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
-	memcpy(hdr->addr1, local->dev->dev_addr, ETH_ALEN);
-	memcpy(hdr->addr2, sta->addr, ETH_ALEN);
-	hdr->duration_id = cpu_to_le16(sta->aid | BIT(15) | BIT(14));
-
-	PDEBUG(DEBUG_PS2,
-	       "%s: Scheduling buffered packet delivery for STA %pM\n",
-	       local->dev->name, sta->addr);
-
-	skb->dev = local->dev;
-
-	memset(&rx_stats, 0, sizeof(rx_stats));
-	hostap_rx(local->dev, skb, &rx_stats);
-}
-
-
-int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[],
-			   struct iw_quality qual[], int buf_size,
-			   int aplist)
-{
-	struct ap_data *ap = local->ap;
-	struct list_head *ptr;
-	int count = 0;
-
-	spin_lock_bh(&ap->sta_table_lock);
-
-	for (ptr = ap->sta_list.next; ptr != NULL && ptr != &ap->sta_list;
-	     ptr = ptr->next) {
-		struct sta_info *sta = (struct sta_info *) ptr;
-
-		if (aplist && !sta->ap)
-			continue;
-		addr[count].sa_family = ARPHRD_ETHER;
-		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
-		if (sta->last_rx_silence == 0)
-			qual[count].qual = sta->last_rx_signal < 27 ?
-				0 : (sta->last_rx_signal - 27) * 92 / 127;
-		else
-			qual[count].qual = sta->last_rx_signal -
-				sta->last_rx_silence - 35;
-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
-		qual[count].updated = sta->last_rx_updated;
-
-		sta->last_rx_updated = IW_QUAL_DBM;
-
-		count++;
-		if (count >= buf_size)
-			break;
-	}
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	return count;
-}
-
-
-/* Translate our list of Access Points & Stations to a card independent
- * format that the Wireless Tools will understand - Jean II */
-int prism2_ap_translate_scan(struct net_device *dev,
-			     struct iw_request_info *info, char *buffer)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct ap_data *ap;
-	struct list_head *ptr;
-	struct iw_event iwe;
-	char *current_ev = buffer;
-	char *end_buf = buffer + IW_SCAN_MAX_DATA;
-#if !defined(PRISM2_NO_KERNEL_IEEE80211_MGMT)
-	char buf[64];
-#endif
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	ap = local->ap;
-
-	spin_lock_bh(&ap->sta_table_lock);
-
-	for (ptr = ap->sta_list.next; ptr != NULL && ptr != &ap->sta_list;
-	     ptr = ptr->next) {
-		struct sta_info *sta = (struct sta_info *) ptr;
-
-		/* First entry *MUST* be the AP MAC address */
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWAP;
-		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-		memcpy(iwe.u.ap_addr.sa_data, sta->addr, ETH_ALEN);
-		iwe.len = IW_EV_ADDR_LEN;
-		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-						  &iwe, IW_EV_ADDR_LEN);
-
-		/* Use the mode to indicate if it's a station or
-		 * an Access Point */
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWMODE;
-		if (sta->ap)
-			iwe.u.mode = IW_MODE_MASTER;
-		else
-			iwe.u.mode = IW_MODE_INFRA;
-		iwe.len = IW_EV_UINT_LEN;
-		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-						  &iwe, IW_EV_UINT_LEN);
-
-		/* Some quality */
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = IWEVQUAL;
-		if (sta->last_rx_silence == 0)
-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
-				0 : (sta->last_rx_signal - 27) * 92 / 127;
-		else
-			iwe.u.qual.qual = sta->last_rx_signal -
-				sta->last_rx_silence - 35;
-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
-		iwe.u.qual.updated = sta->last_rx_updated;
-		iwe.len = IW_EV_QUAL_LEN;
-		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-						  &iwe, IW_EV_QUAL_LEN);
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-		if (sta->ap) {
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = SIOCGIWESSID;
-			iwe.u.data.length = sta->u.ap.ssid_len;
-			iwe.u.data.flags = 1;
-			current_ev = iwe_stream_add_point(info, current_ev,
-							  end_buf, &iwe,
-							  sta->u.ap.ssid);
-
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = SIOCGIWENCODE;
-			if (sta->capability & WLAN_CAPABILITY_PRIVACY)
-				iwe.u.data.flags =
-					IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-			else
-				iwe.u.data.flags = IW_ENCODE_DISABLED;
-			current_ev = iwe_stream_add_point(info, current_ev,
-							  end_buf, &iwe,
-							  sta->u.ap.ssid);
-
-			if (sta->u.ap.channel > 0 &&
-			    sta->u.ap.channel <= FREQ_COUNT) {
-				memset(&iwe, 0, sizeof(iwe));
-				iwe.cmd = SIOCGIWFREQ;
-				iwe.u.freq.m = freq_list[sta->u.ap.channel - 1]
-					* 100000;
-				iwe.u.freq.e = 1;
-				current_ev = iwe_stream_add_event(
-					info, current_ev, end_buf, &iwe,
-					IW_EV_FREQ_LEN);
-			}
-
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = IWEVCUSTOM;
-			sprintf(buf, "beacon_interval=%d",
-				sta->listen_interval);
-			iwe.u.data.length = strlen(buf);
-			current_ev = iwe_stream_add_point(info, current_ev,
-							  end_buf, &iwe, buf);
-		}
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-		sta->last_rx_updated = IW_QUAL_DBM;
-
-		/* To be continued, we should make good use of IWEVCUSTOM */
-	}
-
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	return current_ev - buffer;
-}
-
-
-static int prism2_hostapd_add_sta(struct ap_data *ap,
-				  struct prism2_hostapd_param *param)
-{
-	struct sta_info *sta;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, param->sta_addr);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	if (sta == NULL) {
-		sta = ap_add_sta(ap, param->sta_addr);
-		if (sta == NULL)
-			return -1;
-	}
-
-	if (!(sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local)
-		hostap_event_new_sta(sta->local->dev, sta);
-
-	sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
-	sta->last_rx = jiffies;
-	sta->aid = param->u.add_sta.aid;
-	sta->capability = param->u.add_sta.capability;
-	sta->tx_supp_rates = param->u.add_sta.tx_supp_rates;
-	if (sta->tx_supp_rates & WLAN_RATE_1M)
-		sta->supported_rates[0] = 2;
-	if (sta->tx_supp_rates & WLAN_RATE_2M)
-		sta->supported_rates[1] = 4;
-	if (sta->tx_supp_rates & WLAN_RATE_5M5)
-		sta->supported_rates[2] = 11;
-	if (sta->tx_supp_rates & WLAN_RATE_11M)
-		sta->supported_rates[3] = 22;
-	prism2_check_tx_rates(sta);
-	atomic_dec(&sta->users);
-	return 0;
-}
-
-
-static int prism2_hostapd_remove_sta(struct ap_data *ap,
-				     struct prism2_hostapd_param *param)
-{
-	struct sta_info *sta;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, param->sta_addr);
-	if (sta) {
-		ap_sta_hash_del(ap, sta);
-		list_del(&sta->list);
-	}
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	if (!sta)
-		return -ENOENT;
-
-	if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local)
-		hostap_event_expired_sta(sta->local->dev, sta);
-	ap_free_sta(ap, sta);
-
-	return 0;
-}
-
-
-static int prism2_hostapd_get_info_sta(struct ap_data *ap,
-				       struct prism2_hostapd_param *param)
-{
-	struct sta_info *sta;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, param->sta_addr);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	if (!sta)
-		return -ENOENT;
-
-	param->u.get_info_sta.inactive_sec = (jiffies - sta->last_rx) / HZ;
-
-	atomic_dec(&sta->users);
-
-	return 1;
-}
-
-
-static int prism2_hostapd_set_flags_sta(struct ap_data *ap,
-					struct prism2_hostapd_param *param)
-{
-	struct sta_info *sta;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, param->sta_addr);
-	if (sta) {
-		sta->flags |= param->u.set_flags_sta.flags_or;
-		sta->flags &= param->u.set_flags_sta.flags_and;
-	}
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	if (!sta)
-		return -ENOENT;
-
-	return 0;
-}
-
-
-static int prism2_hostapd_sta_clear_stats(struct ap_data *ap,
-					  struct prism2_hostapd_param *param)
-{
-	struct sta_info *sta;
-	int rate;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, param->sta_addr);
-	if (sta) {
-		sta->rx_packets = sta->tx_packets = 0;
-		sta->rx_bytes = sta->tx_bytes = 0;
-		for (rate = 0; rate < WLAN_RATE_COUNT; rate++) {
-			sta->tx_count[rate] = 0;
-			sta->rx_count[rate] = 0;
-		}
-	}
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	if (!sta)
-		return -ENOENT;
-
-	return 0;
-}
-
-
-int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param)
-{
-	switch (param->cmd) {
-	case PRISM2_HOSTAPD_FLUSH:
-		ap_control_kickall(ap);
-		return 0;
-	case PRISM2_HOSTAPD_ADD_STA:
-		return prism2_hostapd_add_sta(ap, param);
-	case PRISM2_HOSTAPD_REMOVE_STA:
-		return prism2_hostapd_remove_sta(ap, param);
-	case PRISM2_HOSTAPD_GET_INFO_STA:
-		return prism2_hostapd_get_info_sta(ap, param);
-	case PRISM2_HOSTAPD_SET_FLAGS_STA:
-		return prism2_hostapd_set_flags_sta(ap, param);
-	case PRISM2_HOSTAPD_STA_CLEAR_STATS:
-		return prism2_hostapd_sta_clear_stats(ap, param);
-	default:
-		printk(KERN_WARNING "prism2_hostapd: unknown cmd=%d\n",
-		       param->cmd);
-		return -EOPNOTSUPP;
-	}
-}
-
-
-/* Update station info for host-based TX rate control and return current
- * TX rate */
-static int ap_update_sta_tx_rate(struct sta_info *sta, struct net_device *dev)
-{
-	int ret = sta->tx_rate;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	sta->tx_count[sta->tx_rate_idx]++;
-	sta->tx_since_last_failure++;
-	sta->tx_consecutive_exc = 0;
-	if (sta->tx_since_last_failure >= WLAN_RATE_UPDATE_COUNT &&
-	    sta->tx_rate_idx < sta->tx_max_rate) {
-		/* use next higher rate */
-		int old_rate, new_rate;
-		old_rate = new_rate = sta->tx_rate_idx;
-		while (new_rate < sta->tx_max_rate) {
-			new_rate++;
-			if (ap_tx_rate_ok(new_rate, sta, local)) {
-				sta->tx_rate_idx = new_rate;
-				break;
-			}
-		}
-		if (old_rate != sta->tx_rate_idx) {
-			switch (sta->tx_rate_idx) {
-			case 0: sta->tx_rate = 10; break;
-			case 1: sta->tx_rate = 20; break;
-			case 2: sta->tx_rate = 55; break;
-			case 3: sta->tx_rate = 110; break;
-			default: sta->tx_rate = 0; break;
-			}
-			PDEBUG(DEBUG_AP, "%s: STA %pM TX rate raised to %d\n",
-			       dev->name, sta->addr, sta->tx_rate);
-		}
-		sta->tx_since_last_failure = 0;
-	}
-
-	return ret;
-}
-
-
-/* Called only from software IRQ. Called for each TX frame prior possible
- * encryption and transmit. */
-ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx)
-{
-	struct sta_info *sta = NULL;
-	struct sk_buff *skb = tx->skb;
-	int set_tim, ret;
-	struct ieee80211_hdr *hdr;
-	struct hostap_skb_tx_data *meta;
-
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-	ret = AP_TX_CONTINUE;
-	if (local->ap == NULL || skb->len < 10 ||
-	    meta->iface->type == HOSTAP_INTERFACE_STA)
-		goto out;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-
-	if (hdr->addr1[0] & 0x01) {
-		/* broadcast/multicast frame - no AP related processing */
-		if (local->ap->num_sta <= 0)
-			ret = AP_TX_DROP;
-		goto out;
-	}
-
-	/* unicast packet - check whether destination STA is associated */
-	spin_lock(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr1);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock(&local->ap->sta_table_lock);
-
-	if (local->iw_mode == IW_MODE_MASTER && sta == NULL &&
-	    !(meta->flags & HOSTAP_TX_FLAGS_WDS) &&
-	    meta->iface->type != HOSTAP_INTERFACE_MASTER &&
-	    meta->iface->type != HOSTAP_INTERFACE_AP) {
-#if 0
-		/* This can happen, e.g., when wlan0 is added to a bridge and
-		 * bridging code does not know which port is the correct target
-		 * for a unicast frame. In this case, the packet is send to all
-		 * ports of the bridge. Since this is a valid scenario, do not
-		 * print out any errors here. */
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "AP: drop packet to non-associated "
-			       "STA %pM\n", hdr->addr1);
-		}
-#endif
-		local->ap->tx_drop_nonassoc++;
-		ret = AP_TX_DROP;
-		goto out;
-	}
-
-	if (sta == NULL)
-		goto out;
-
-	if (!(sta->flags & WLAN_STA_AUTHORIZED))
-		ret = AP_TX_CONTINUE_NOT_AUTHORIZED;
-
-	/* Set tx_rate if using host-based TX rate control */
-	if (!local->fw_tx_rate_control)
-		local->ap->last_tx_rate = meta->rate =
-			ap_update_sta_tx_rate(sta, local->dev);
-
-	if (local->iw_mode != IW_MODE_MASTER)
-		goto out;
-
-	if (!(sta->flags & WLAN_STA_PS))
-		goto out;
-
-	if (meta->flags & HOSTAP_TX_FLAGS_ADD_MOREDATA) {
-		/* indicate to STA that more frames follow */
-		hdr->frame_control |=
-			cpu_to_le16(IEEE80211_FCTL_MOREDATA);
-	}
-
-	if (meta->flags & HOSTAP_TX_FLAGS_BUFFERED_FRAME) {
-		/* packet was already buffered and now send due to
-		 * PS poll, so do not rebuffer it */
-		goto out;
-	}
-
-	if (skb_queue_len(&sta->tx_buf) >= STA_MAX_TX_BUFFER) {
-		PDEBUG(DEBUG_PS, "%s: No more space in STA (%pM)'s"
-		       "PS mode buffer\n",
-		       local->dev->name, sta->addr);
-		/* Make sure that TIM is set for the station (it might not be
-		 * after AP wlan hw reset). */
-		/* FIX: should fix hw reset to restore bits based on STA
-		 * buffer state.. */
-		hostap_set_tim(local, sta->aid, 1);
-		sta->flags |= WLAN_STA_TIM;
-		ret = AP_TX_DROP;
-		goto out;
-	}
-
-	/* STA in PS mode, buffer frame for later delivery */
-	set_tim = skb_queue_empty(&sta->tx_buf);
-	skb_queue_tail(&sta->tx_buf, skb);
-	/* FIX: could save RX time to skb and expire buffered frames after
-	 * some time if STA does not poll for them */
-
-	if (set_tim) {
-		if (sta->flags & WLAN_STA_TIM)
-			PDEBUG(DEBUG_PS2, "Re-setting TIM for aid %d\n",
-			       sta->aid);
-		hostap_set_tim(local, sta->aid, 1);
-		sta->flags |= WLAN_STA_TIM;
-	}
-
-	ret = AP_TX_BUFFERED;
-
- out:
-	if (sta != NULL) {
-		if (ret == AP_TX_CONTINUE ||
-		    ret == AP_TX_CONTINUE_NOT_AUTHORIZED) {
-			sta->tx_packets++;
-			sta->tx_bytes += skb->len;
-			sta->last_tx = jiffies;
-		}
-
-		if ((ret == AP_TX_CONTINUE ||
-		     ret == AP_TX_CONTINUE_NOT_AUTHORIZED) &&
-		    sta->crypt && tx->host_encrypt) {
-			tx->crypt = sta->crypt;
-			tx->sta_ptr = sta; /* hostap_handle_sta_release() will
-					    * be called to release sta info
-					    * later */
-		} else
-			atomic_dec(&sta->users);
-	}
-
-	return ret;
-}
-
-
-void hostap_handle_sta_release(void *ptr)
-{
-	struct sta_info *sta = ptr;
-	atomic_dec(&sta->users);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb)
-{
-	struct sta_info *sta;
-	struct ieee80211_hdr *hdr;
-	struct hostap_skb_tx_data *meta;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-
-	spin_lock(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr1);
-	if (!sta) {
-		spin_unlock(&local->ap->sta_table_lock);
-		PDEBUG(DEBUG_AP, "%s: Could not find STA %pM"
-		       " for this TX error (@%lu)\n",
-		       local->dev->name, hdr->addr1, jiffies);
-		return;
-	}
-
-	sta->tx_since_last_failure = 0;
-	sta->tx_consecutive_exc++;
-
-	if (sta->tx_consecutive_exc >= WLAN_RATE_DECREASE_THRESHOLD &&
-	    sta->tx_rate_idx > 0 && meta->rate <= sta->tx_rate) {
-		/* use next lower rate */
-		int old, rate;
-		old = rate = sta->tx_rate_idx;
-		while (rate > 0) {
-			rate--;
-			if (ap_tx_rate_ok(rate, sta, local)) {
-				sta->tx_rate_idx = rate;
-				break;
-			}
-		}
-		if (old != sta->tx_rate_idx) {
-			switch (sta->tx_rate_idx) {
-			case 0: sta->tx_rate = 10; break;
-			case 1: sta->tx_rate = 20; break;
-			case 2: sta->tx_rate = 55; break;
-			case 3: sta->tx_rate = 110; break;
-			default: sta->tx_rate = 0; break;
-			}
-			PDEBUG(DEBUG_AP,
-			       "%s: STA %pM TX rate lowered to %d\n",
-			       local->dev->name, sta->addr, sta->tx_rate);
-		}
-		sta->tx_consecutive_exc = 0;
-	}
-	spin_unlock(&local->ap->sta_table_lock);
-}
-
-
-static void hostap_update_sta_ps2(local_info_t *local, struct sta_info *sta,
-				  int pwrmgt, int type, int stype)
-{
-	if (pwrmgt && !(sta->flags & WLAN_STA_PS)) {
-		sta->flags |= WLAN_STA_PS;
-		PDEBUG(DEBUG_PS2, "STA %pM changed to use PS "
-		       "mode (type=0x%02X, stype=0x%02X)\n",
-		       sta->addr, type >> 2, stype >> 4);
-	} else if (!pwrmgt && (sta->flags & WLAN_STA_PS)) {
-		sta->flags &= ~WLAN_STA_PS;
-		PDEBUG(DEBUG_PS2, "STA %pM changed to not use "
-		       "PS mode (type=0x%02X, stype=0x%02X)\n",
-		       sta->addr, type >> 2, stype >> 4);
-		if (type != IEEE80211_FTYPE_CTL ||
-		    stype != IEEE80211_STYPE_PSPOLL)
-			schedule_packet_send(local, sta);
-	}
-}
-
-
-/* Called only as a tasklet (software IRQ). Called for each RX frame to update
- * STA power saving state. pwrmgt is a flag from 802.11 frame_control field. */
-int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr)
-{
-	struct sta_info *sta;
-	u16 fc;
-
-	spin_lock(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock(&local->ap->sta_table_lock);
-
-	if (!sta)
-		return -1;
-
-	fc = le16_to_cpu(hdr->frame_control);
-	hostap_update_sta_ps2(local, sta, fc & IEEE80211_FCTL_PM,
-			      fc & IEEE80211_FCTL_FTYPE,
-			      fc & IEEE80211_FCTL_STYPE);
-
-	atomic_dec(&sta->users);
-	return 0;
-}
-
-
-/* Called only as a tasklet (software IRQ). Called for each RX frame after
- * getting RX header and payload from hardware. */
-ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev,
-			       struct sk_buff *skb,
-			       struct hostap_80211_rx_status *rx_stats,
-			       int wds)
-{
-	int ret;
-	struct sta_info *sta;
-	u16 fc, type, stype;
-	struct ieee80211_hdr *hdr;
-
-	if (local->ap == NULL)
-		return AP_RX_CONTINUE;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-
-	fc = le16_to_cpu(hdr->frame_control);
-	type = fc & IEEE80211_FCTL_FTYPE;
-	stype = fc & IEEE80211_FCTL_STYPE;
-
-	spin_lock(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock(&local->ap->sta_table_lock);
-
-	if (sta && !(sta->flags & WLAN_STA_AUTHORIZED))
-		ret = AP_RX_CONTINUE_NOT_AUTHORIZED;
-	else
-		ret = AP_RX_CONTINUE;
-
-
-	if (fc & IEEE80211_FCTL_TODS) {
-		if (!wds && (sta == NULL || !(sta->flags & WLAN_STA_ASSOC))) {
-			if (local->hostapd) {
-				prism2_rx_80211(local->apdev, skb, rx_stats,
-						PRISM2_RX_NON_ASSOC);
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-			} else {
-				printk(KERN_DEBUG "%s: dropped received packet"
-				       " from non-associated STA %pM"
-				       " (type=0x%02x, subtype=0x%02x)\n",
-				       dev->name, hdr->addr2,
-				       type >> 2, stype >> 4);
-				hostap_rx(dev, skb, rx_stats);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-			}
-			ret = AP_RX_EXIT;
-			goto out;
-		}
-	} else if (fc & IEEE80211_FCTL_FROMDS) {
-		if (!wds) {
-			/* FromDS frame - not for us; probably
-			 * broadcast/multicast in another BSS - drop */
-			if (ether_addr_equal(hdr->addr1, dev->dev_addr)) {
-				printk(KERN_DEBUG "Odd.. FromDS packet "
-				       "received with own BSSID\n");
-				hostap_dump_rx_80211(dev->name, skb, rx_stats);
-			}
-			ret = AP_RX_DROP;
-			goto out;
-		}
-	} else if (stype == IEEE80211_STYPE_NULLFUNC && sta == NULL &&
-		   ether_addr_equal(hdr->addr1, dev->dev_addr)) {
-
-		if (local->hostapd) {
-			prism2_rx_80211(local->apdev, skb, rx_stats,
-					PRISM2_RX_NON_ASSOC);
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-		} else {
-			/* At least Lucent f/w seems to send data::nullfunc
-			 * frames with no ToDS flag when the current AP returns
-			 * after being unavailable for some time. Speed up
-			 * re-association by informing the station about it not
-			 * being associated. */
-			printk(KERN_DEBUG "%s: rejected received nullfunc frame"
-			       " without ToDS from not associated STA %pM\n",
-			       dev->name, hdr->addr2);
-			hostap_rx(dev, skb, rx_stats);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-		}
-		ret = AP_RX_EXIT;
-		goto out;
-	} else if (stype == IEEE80211_STYPE_NULLFUNC) {
-		/* At least Lucent cards seem to send periodic nullfunc
-		 * frames with ToDS. Let these through to update SQ
-		 * stats and PS state. Nullfunc frames do not contain
-		 * any data and they will be dropped below. */
-	} else {
-		/* If BSSID (Addr3) is foreign, this frame is a normal
-		 * broadcast frame from an IBSS network. Drop it silently.
-		 * If BSSID is own, report the dropping of this frame. */
-		if (ether_addr_equal(hdr->addr3, dev->dev_addr)) {
-			printk(KERN_DEBUG "%s: dropped received packet from %pM"
-			       " with no ToDS flag "
-			       "(type=0x%02x, subtype=0x%02x)\n", dev->name,
-			       hdr->addr2, type >> 2, stype >> 4);
-			hostap_dump_rx_80211(dev->name, skb, rx_stats);
-		}
-		ret = AP_RX_DROP;
-		goto out;
-	}
-
-	if (sta) {
-		hostap_update_sta_ps2(local, sta, fc & IEEE80211_FCTL_PM,
-				      type, stype);
-
-		sta->rx_packets++;
-		sta->rx_bytes += skb->len;
-		sta->last_rx = jiffies;
-	}
-
-	if (local->ap->nullfunc_ack && stype == IEEE80211_STYPE_NULLFUNC &&
-	    fc & IEEE80211_FCTL_TODS) {
-		if (local->hostapd) {
-			prism2_rx_80211(local->apdev, skb, rx_stats,
-					PRISM2_RX_NULLFUNC_ACK);
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-		} else {
-			/* some STA f/w's seem to require control::ACK frame
-			 * for data::nullfunc, but Prism2 f/w 0.8.0 (at least
-			 * from Compaq) does not send this.. Try to generate
-			 * ACK for these frames from the host driver to make
-			 * power saving work with, e.g., Lucent WaveLAN f/w */
-			hostap_rx(dev, skb, rx_stats);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-		}
-		ret = AP_RX_EXIT;
-		goto out;
-	}
-
- out:
-	if (sta)
-		atomic_dec(&sta->users);
-
-	return ret;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-int hostap_handle_sta_crypto(local_info_t *local,
-			     struct ieee80211_hdr *hdr,
-			     struct lib80211_crypt_data **crypt,
-			     void **sta_ptr)
-{
-	struct sta_info *sta;
-
-	spin_lock(&local->ap->sta_table_lock);
-	sta = ap_get_sta(local->ap, hdr->addr2);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock(&local->ap->sta_table_lock);
-
-	if (!sta)
-		return -1;
-
-	if (sta->crypt) {
-		*crypt = sta->crypt;
-		*sta_ptr = sta;
-		/* hostap_handle_sta_release() will be called to release STA
-		 * info */
-	} else
-		atomic_dec(&sta->users);
-
-	return 0;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr)
-{
-	struct sta_info *sta;
-	int ret = 0;
-
-	spin_lock(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, sta_addr);
-	if (sta != NULL && (sta->flags & WLAN_STA_ASSOC) && !sta->ap)
-		ret = 1;
-	spin_unlock(&ap->sta_table_lock);
-
-	return ret;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr)
-{
-	struct sta_info *sta;
-	int ret = 0;
-
-	spin_lock(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, sta_addr);
-	if (sta != NULL && (sta->flags & WLAN_STA_ASSOC) && !sta->ap &&
-	    ((sta->flags & WLAN_STA_AUTHORIZED) ||
-	     ap->local->ieee_802_1x == 0))
-		ret = 1;
-	spin_unlock(&ap->sta_table_lock);
-
-	return ret;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-int hostap_add_sta(struct ap_data *ap, u8 *sta_addr)
-{
-	struct sta_info *sta;
-	int ret = 1;
-
-	if (!ap)
-		return -1;
-
-	spin_lock(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, sta_addr);
-	if (sta)
-		ret = 0;
-	spin_unlock(&ap->sta_table_lock);
-
-	if (ret == 1) {
-		sta = ap_add_sta(ap, sta_addr);
-		if (!sta)
-			return -1;
-		sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC;
-		sta->ap = 1;
-		memset(sta->supported_rates, 0, sizeof(sta->supported_rates));
-		/* No way of knowing which rates are supported since we did not
-		 * get supported rates element from beacon/assoc req. Assume
-		 * that remote end supports all 802.11b rates. */
-		sta->supported_rates[0] = 0x82;
-		sta->supported_rates[1] = 0x84;
-		sta->supported_rates[2] = 0x0b;
-		sta->supported_rates[3] = 0x16;
-		sta->tx_supp_rates = WLAN_RATE_1M | WLAN_RATE_2M |
-			WLAN_RATE_5M5 | WLAN_RATE_11M;
-		sta->tx_rate = 110;
-		sta->tx_max_rate = sta->tx_rate_idx = 3;
-	}
-
-	return ret;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-int hostap_update_rx_stats(struct ap_data *ap,
-			   struct ieee80211_hdr *hdr,
-			   struct hostap_80211_rx_status *rx_stats)
-{
-	struct sta_info *sta;
-
-	if (!ap)
-		return -1;
-
-	spin_lock(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, hdr->addr2);
-	if (sta) {
-		sta->last_rx_silence = rx_stats->noise;
-		sta->last_rx_signal = rx_stats->signal;
-		sta->last_rx_rate = rx_stats->rate;
-		sta->last_rx_updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
-		if (rx_stats->rate == 10)
-			sta->rx_count[0]++;
-		else if (rx_stats->rate == 20)
-			sta->rx_count[1]++;
-		else if (rx_stats->rate == 55)
-			sta->rx_count[2]++;
-		else if (rx_stats->rate == 110)
-			sta->rx_count[3]++;
-	}
-	spin_unlock(&ap->sta_table_lock);
-
-	return sta ? 0 : -1;
-}
-
-
-void hostap_update_rates(local_info_t *local)
-{
-	struct sta_info *sta;
-	struct ap_data *ap = local->ap;
-
-	if (!ap)
-		return;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	list_for_each_entry(sta, &ap->sta_list, list) {
-		prism2_check_tx_rates(sta);
-	}
-	spin_unlock_bh(&ap->sta_table_lock);
-}
-
-
-void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent,
-			 struct lib80211_crypt_data ***crypt)
-{
-	struct sta_info *sta;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	sta = ap_get_sta(ap, addr);
-	if (sta)
-		atomic_inc(&sta->users);
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	if (!sta && permanent)
-		sta = ap_add_sta(ap, addr);
-
-	if (!sta)
-		return NULL;
-
-	if (permanent)
-		sta->flags |= WLAN_STA_PERM;
-
-	*crypt = &sta->crypt;
-
-	return sta;
-}
-
-
-void hostap_add_wds_links(local_info_t *local)
-{
-	struct ap_data *ap = local->ap;
-	struct sta_info *sta;
-
-	spin_lock_bh(&ap->sta_table_lock);
-	list_for_each_entry(sta, &ap->sta_list, list) {
-		if (sta->ap)
-			hostap_wds_link_oper(local, sta->addr, WDS_ADD);
-	}
-	spin_unlock_bh(&ap->sta_table_lock);
-
-	schedule_work(&local->ap->wds_oper_queue);
-}
-
-
-void hostap_wds_link_oper(local_info_t *local, u8 *addr, wds_oper_type type)
-{
-	struct wds_oper_data *entry;
-
-	entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
-	if (!entry)
-		return;
-	memcpy(entry->addr, addr, ETH_ALEN);
-	entry->type = type;
-	spin_lock_bh(&local->lock);
-	entry->next = local->ap->wds_oper_entries;
-	local->ap->wds_oper_entries = entry;
-	spin_unlock_bh(&local->lock);
-
-	schedule_work(&local->ap->wds_oper_queue);
-}
-
-
-EXPORT_SYMBOL(hostap_init_data);
-EXPORT_SYMBOL(hostap_init_ap_proc);
-EXPORT_SYMBOL(hostap_free_data);
-EXPORT_SYMBOL(hostap_check_sta_fw_version);
-EXPORT_SYMBOL(hostap_handle_sta_tx_exc);
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
diff --git a/drivers/net/wireless/intersil/hostap/hostap_ap.h b/drivers/net/wireless/intersil/hostap/hostap_ap.h
deleted file mode 100644
index b7ac9e2f1a..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_ap.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_AP_H
-#define HOSTAP_AP_H
-
-#include "hostap_80211.h"
-
-/* AP data structures for STAs */
-
-/* maximum number of frames to buffer per STA */
-#define STA_MAX_TX_BUFFER 32
-
-/* STA flags */
-#define WLAN_STA_AUTH BIT(0)
-#define WLAN_STA_ASSOC BIT(1)
-#define WLAN_STA_PS BIT(2)
-#define WLAN_STA_TIM BIT(3) /* TIM bit is on for PS stations */
-#define WLAN_STA_PERM BIT(4) /* permanent; do not remove entry on expiration */
-#define WLAN_STA_AUTHORIZED BIT(5) /* If 802.1X is used, this flag is
-				    * controlling whether STA is authorized to
-				    * send and receive non-IEEE 802.1X frames
-				    */
-#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */
-
-#define WLAN_RATE_1M BIT(0)
-#define WLAN_RATE_2M BIT(1)
-#define WLAN_RATE_5M5 BIT(2)
-#define WLAN_RATE_11M BIT(3)
-#define WLAN_RATE_COUNT 4
-
-/* Maximum size of Supported Rates info element. IEEE 802.11 has a limit of 8,
- * but some pre-standard IEEE 802.11g products use longer elements. */
-#define WLAN_SUPP_RATES_MAX 32
-
-/* Try to increase TX rate after # successfully sent consecutive packets */
-#define WLAN_RATE_UPDATE_COUNT 50
-
-/* Decrease TX rate after # consecutive dropped packets */
-#define WLAN_RATE_DECREASE_THRESHOLD 2
-
-struct sta_info {
-	struct list_head list;
-	struct sta_info *hnext; /* next entry in hash table list */
-	atomic_t users; /* number of users (do not remove if > 0) */
-	struct proc_dir_entry *proc;
-
-	u8 addr[6];
-	u16 aid; /* STA's unique AID (1 .. 2007) or 0 if not yet assigned */
-	u32 flags;
-	u16 capability;
-	u16 listen_interval; /* or beacon_int for APs */
-	u8 supported_rates[WLAN_SUPP_RATES_MAX];
-
-	unsigned long last_auth;
-	unsigned long last_assoc;
-	unsigned long last_rx;
-	unsigned long last_tx;
-	unsigned long rx_packets, tx_packets;
-	unsigned long rx_bytes, tx_bytes;
-	struct sk_buff_head tx_buf;
-	/* FIX: timeout buffers with an expiry time somehow derived from
-	 * listen_interval */
-
-	s8 last_rx_silence; /* Noise in dBm */
-	s8 last_rx_signal; /* Signal strength in dBm */
-	u8 last_rx_rate; /* TX rate in 0.1 Mbps */
-	u8 last_rx_updated; /* IWSPY's struct iw_quality::updated */
-
-	u8 tx_supp_rates; /* bit field of supported TX rates */
-	u8 tx_rate; /* current TX rate (in 0.1 Mbps) */
-	u8 tx_rate_idx; /* current TX rate (WLAN_RATE_*) */
-	u8 tx_max_rate; /* max TX rate (WLAN_RATE_*) */
-	u32 tx_count[WLAN_RATE_COUNT]; /* number of frames sent (per rate) */
-	u32 rx_count[WLAN_RATE_COUNT]; /* number of frames received (per rate)
-					*/
-	u32 tx_since_last_failure;
-	u32 tx_consecutive_exc;
-
-	struct lib80211_crypt_data *crypt;
-
-	int ap; /* whether this station is an AP */
-
-	local_info_t *local;
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	union {
-		struct {
-			char *challenge; /* shared key authentication
-					  * challenge */
-		} sta;
-		struct {
-			int ssid_len;
-			unsigned char ssid[MAX_SSID_LEN + 1]; /* AP's ssid */
-			int channel;
-			unsigned long last_beacon; /* last RX beacon time */
-		} ap;
-	} u;
-
-	struct timer_list timer;
-	enum { STA_NULLFUNC = 0, STA_DISASSOC, STA_DEAUTH } timeout_next;
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-};
-
-
-#define MAX_STA_COUNT 1024
-
-/* Maximum number of AIDs to use for STAs; must be 2007 or lower
- * (8802.11 limitation) */
-#define MAX_AID_TABLE_SIZE 128
-
-#define STA_HASH_SIZE 256
-#define STA_HASH(sta) (sta[5])
-
-
-/* Default value for maximum station inactivity. After AP_MAX_INACTIVITY_SEC
- * has passed since last received frame from the station, a nullfunc data
- * frame is sent to the station. If this frame is not acknowledged and no other
- * frames have been received, the station will be disassociated after
- * AP_DISASSOC_DELAY. Similarly, a the station will be deauthenticated after
- * AP_DEAUTH_DELAY. AP_TIMEOUT_RESOLUTION is the resolution that is used with
- * max inactivity timer. */
-#define AP_MAX_INACTIVITY_SEC (5 * 60)
-#define AP_DISASSOC_DELAY (HZ)
-#define AP_DEAUTH_DELAY (HZ)
-
-/* ap_policy: whether to accept frames to/from other APs/IBSS */
-typedef enum {
-	AP_OTHER_AP_SKIP_ALL = 0,
-	AP_OTHER_AP_SAME_SSID = 1,
-	AP_OTHER_AP_ALL = 2,
-	AP_OTHER_AP_EVEN_IBSS = 3
-} ap_policy_enum;
-
-#define PRISM2_AUTH_OPEN BIT(0)
-#define PRISM2_AUTH_SHARED_KEY BIT(1)
-
-
-/* MAC address-based restrictions */
-struct mac_entry {
-	struct list_head list;
-	u8 addr[6];
-};
-
-struct mac_restrictions {
-	enum { MAC_POLICY_OPEN = 0, MAC_POLICY_ALLOW, MAC_POLICY_DENY } policy;
-	unsigned int entries;
-	struct list_head mac_list;
-	spinlock_t lock;
-};
-
-
-struct add_sta_proc_data {
-	u8 addr[ETH_ALEN];
-	struct add_sta_proc_data *next;
-};
-
-
-typedef enum { WDS_ADD, WDS_DEL } wds_oper_type;
-struct wds_oper_data {
-	wds_oper_type type;
-	u8 addr[ETH_ALEN];
-	struct wds_oper_data *next;
-};
-
-
-struct ap_data {
-	int initialized; /* whether ap_data has been initialized */
-	local_info_t *local;
-	int bridge_packets; /* send packet to associated STAs directly to the
-			     * wireless media instead of higher layers in the
-			     * kernel */
-	unsigned int bridged_unicast; /* number of unicast frames bridged on
-				       * wireless media */
-	unsigned int bridged_multicast; /* number of non-unicast frames
-					 * bridged on wireless media */
-	unsigned int tx_drop_nonassoc; /* number of unicast TX packets dropped
-					* because they were to an address that
-					* was not associated */
-	int nullfunc_ack; /* use workaround for nullfunc frame ACKs */
-
-	spinlock_t sta_table_lock;
-	int num_sta; /* number of entries in sta_list */
-	struct list_head sta_list; /* STA info list head */
-	struct sta_info *sta_hash[STA_HASH_SIZE];
-
-	struct proc_dir_entry *proc;
-
-	ap_policy_enum ap_policy;
-	unsigned int max_inactivity;
-	int autom_ap_wds;
-
-	struct mac_restrictions mac_restrictions; /* MAC-based auth */
-	int last_tx_rate;
-
-	struct work_struct add_sta_proc_queue;
-	struct add_sta_proc_data *add_sta_proc_entries;
-
-	struct work_struct wds_oper_queue;
-	struct wds_oper_data *wds_oper_entries;
-
-	u16 tx_callback_idx;
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	/* pointers to STA info; based on allocated AID or NULL if AID free
-	 * AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1
-	 * and so on
-	 */
-	struct sta_info *sta_aid[MAX_AID_TABLE_SIZE];
-
-	u16 tx_callback_auth, tx_callback_assoc, tx_callback_poll;
-
-	/* WEP operations for generating challenges to be used with shared key
-	 * authentication */
-	struct lib80211_crypto_ops *crypt;
-	void *crypt_priv;
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-};
-
-
-void hostap_rx(struct net_device *dev, struct sk_buff *skb,
-	       struct hostap_80211_rx_status *rx_stats);
-void hostap_init_data(local_info_t *local);
-void hostap_init_ap_proc(local_info_t *local);
-void hostap_free_data(struct ap_data *ap);
-void hostap_check_sta_fw_version(struct ap_data *ap, int sta_fw_ver);
-
-typedef enum {
-	AP_TX_CONTINUE, AP_TX_DROP, AP_TX_RETRY, AP_TX_BUFFERED,
-	AP_TX_CONTINUE_NOT_AUTHORIZED
-} ap_tx_ret;
-struct hostap_tx_data {
-	struct sk_buff *skb;
-	int host_encrypt;
-	struct lib80211_crypt_data *crypt;
-	void *sta_ptr;
-};
-ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx);
-void hostap_handle_sta_release(void *ptr);
-void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb);
-int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr);
-typedef enum {
-	AP_RX_CONTINUE, AP_RX_DROP, AP_RX_EXIT, AP_RX_CONTINUE_NOT_AUTHORIZED
-} ap_rx_ret;
-ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev,
-			       struct sk_buff *skb,
-			       struct hostap_80211_rx_status *rx_stats,
-			       int wds);
-int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr *hdr,
-			     struct lib80211_crypt_data **crypt,
-			     void **sta_ptr);
-int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr);
-int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr);
-int hostap_add_sta(struct ap_data *ap, u8 *sta_addr);
-int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr *hdr,
-			   struct hostap_80211_rx_status *rx_stats);
-void hostap_update_rates(local_info_t *local);
-void hostap_add_wds_links(local_info_t *local);
-void hostap_wds_link_oper(local_info_t *local, u8 *addr, wds_oper_type type);
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-void hostap_deauth_all_stas(struct net_device *dev, struct ap_data *ap,
-			    int resend);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-#endif /* HOSTAP_AP_H */
diff --git a/drivers/net/wireless/intersil/hostap/hostap_common.h b/drivers/net/wireless/intersil/hostap/hostap_common.h
deleted file mode 100644
index dd29a8e8d3..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_common.h
+++ /dev/null
@@ -1,420 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_COMMON_H
-#define HOSTAP_COMMON_H
-
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/* IEEE 802.11 defines */
-
-/* HFA384X Configuration RIDs */
-#define HFA384X_RID_CNFPORTTYPE 0xFC00
-#define HFA384X_RID_CNFOWNMACADDR 0xFC01
-#define HFA384X_RID_CNFDESIREDSSID 0xFC02
-#define HFA384X_RID_CNFOWNCHANNEL 0xFC03
-#define HFA384X_RID_CNFOWNSSID 0xFC04
-#define HFA384X_RID_CNFOWNATIMWINDOW 0xFC05
-#define HFA384X_RID_CNFSYSTEMSCALE 0xFC06
-#define HFA384X_RID_CNFMAXDATALEN 0xFC07
-#define HFA384X_RID_CNFWDSADDRESS 0xFC08
-#define HFA384X_RID_CNFPMENABLED 0xFC09
-#define HFA384X_RID_CNFPMEPS 0xFC0A
-#define HFA384X_RID_CNFMULTICASTRECEIVE 0xFC0B
-#define HFA384X_RID_CNFMAXSLEEPDURATION 0xFC0C
-#define HFA384X_RID_CNFPMHOLDOVERDURATION 0xFC0D
-#define HFA384X_RID_CNFOWNNAME 0xFC0E
-#define HFA384X_RID_CNFOWNDTIMPERIOD 0xFC10
-#define HFA384X_RID_CNFWDSADDRESS1 0xFC11 /* AP f/w only */
-#define HFA384X_RID_CNFWDSADDRESS2 0xFC12 /* AP f/w only */
-#define HFA384X_RID_CNFWDSADDRESS3 0xFC13 /* AP f/w only */
-#define HFA384X_RID_CNFWDSADDRESS4 0xFC14 /* AP f/w only */
-#define HFA384X_RID_CNFWDSADDRESS5 0xFC15 /* AP f/w only */
-#define HFA384X_RID_CNFWDSADDRESS6 0xFC16 /* AP f/w only */
-#define HFA384X_RID_CNFMULTICASTPMBUFFERING 0xFC17 /* AP f/w only */
-#define HFA384X_RID_UNKNOWN1 0xFC20
-#define HFA384X_RID_UNKNOWN2 0xFC21
-#define HFA384X_RID_CNFWEPDEFAULTKEYID 0xFC23
-#define HFA384X_RID_CNFDEFAULTKEY0 0xFC24
-#define HFA384X_RID_CNFDEFAULTKEY1 0xFC25
-#define HFA384X_RID_CNFDEFAULTKEY2 0xFC26
-#define HFA384X_RID_CNFDEFAULTKEY3 0xFC27
-#define HFA384X_RID_CNFWEPFLAGS 0xFC28
-#define HFA384X_RID_CNFWEPKEYMAPPINGTABLE 0xFC29
-#define HFA384X_RID_CNFAUTHENTICATION 0xFC2A
-#define HFA384X_RID_CNFMAXASSOCSTA 0xFC2B /* AP f/w only */
-#define HFA384X_RID_CNFTXCONTROL 0xFC2C
-#define HFA384X_RID_CNFROAMINGMODE 0xFC2D
-#define HFA384X_RID_CNFHOSTAUTHENTICATION 0xFC2E /* AP f/w only */
-#define HFA384X_RID_CNFRCVCRCERROR 0xFC30
-#define HFA384X_RID_CNFMMLIFE 0xFC31
-#define HFA384X_RID_CNFALTRETRYCOUNT 0xFC32
-#define HFA384X_RID_CNFBEACONINT 0xFC33
-#define HFA384X_RID_CNFAPPCFINFO 0xFC34 /* AP f/w only */
-#define HFA384X_RID_CNFSTAPCFINFO 0xFC35
-#define HFA384X_RID_CNFPRIORITYQUSAGE 0xFC37
-#define HFA384X_RID_CNFTIMCTRL 0xFC40
-#define HFA384X_RID_UNKNOWN3 0xFC41 /* added in STA f/w 0.7.x */
-#define HFA384X_RID_CNFTHIRTY2TALLY 0xFC42 /* added in STA f/w 0.8.0 */
-#define HFA384X_RID_CNFENHSECURITY 0xFC43 /* AP f/w or STA f/w >= 1.6.3 */
-#define HFA384X_RID_CNFDBMADJUST 0xFC46 /* added in STA f/w 1.3.1 */
-#define HFA384X_RID_GENERICELEMENT 0xFC48 /* added in STA f/w 1.7.0;
-					   * write only */
-#define HFA384X_RID_PROPAGATIONDELAY 0xFC49 /* added in STA f/w 1.7.6 */
-#define HFA384X_RID_GROUPADDRESSES 0xFC80
-#define HFA384X_RID_CREATEIBSS 0xFC81
-#define HFA384X_RID_FRAGMENTATIONTHRESHOLD 0xFC82
-#define HFA384X_RID_RTSTHRESHOLD 0xFC83
-#define HFA384X_RID_TXRATECONTROL 0xFC84
-#define HFA384X_RID_PROMISCUOUSMODE 0xFC85
-#define HFA384X_RID_FRAGMENTATIONTHRESHOLD0 0xFC90 /* AP f/w only */
-#define HFA384X_RID_FRAGMENTATIONTHRESHOLD1 0xFC91 /* AP f/w only */
-#define HFA384X_RID_FRAGMENTATIONTHRESHOLD2 0xFC92 /* AP f/w only */
-#define HFA384X_RID_FRAGMENTATIONTHRESHOLD3 0xFC93 /* AP f/w only */
-#define HFA384X_RID_FRAGMENTATIONTHRESHOLD4 0xFC94 /* AP f/w only */
-#define HFA384X_RID_FRAGMENTATIONTHRESHOLD5 0xFC95 /* AP f/w only */
-#define HFA384X_RID_FRAGMENTATIONTHRESHOLD6 0xFC96 /* AP f/w only */
-#define HFA384X_RID_RTSTHRESHOLD0 0xFC97 /* AP f/w only */
-#define HFA384X_RID_RTSTHRESHOLD1 0xFC98 /* AP f/w only */
-#define HFA384X_RID_RTSTHRESHOLD2 0xFC99 /* AP f/w only */
-#define HFA384X_RID_RTSTHRESHOLD3 0xFC9A /* AP f/w only */
-#define HFA384X_RID_RTSTHRESHOLD4 0xFC9B /* AP f/w only */
-#define HFA384X_RID_RTSTHRESHOLD5 0xFC9C /* AP f/w only */
-#define HFA384X_RID_RTSTHRESHOLD6 0xFC9D /* AP f/w only */
-#define HFA384X_RID_TXRATECONTROL0 0xFC9E /* AP f/w only */
-#define HFA384X_RID_TXRATECONTROL1 0xFC9F /* AP f/w only */
-#define HFA384X_RID_TXRATECONTROL2 0xFCA0 /* AP f/w only */
-#define HFA384X_RID_TXRATECONTROL3 0xFCA1 /* AP f/w only */
-#define HFA384X_RID_TXRATECONTROL4 0xFCA2 /* AP f/w only */
-#define HFA384X_RID_TXRATECONTROL5 0xFCA3 /* AP f/w only */
-#define HFA384X_RID_TXRATECONTROL6 0xFCA4 /* AP f/w only */
-#define HFA384X_RID_CNFSHORTPREAMBLE 0xFCB0
-#define HFA384X_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1
-#define HFA384X_RID_CNFAUTHENTICATIONRSPTO 0xFCB2
-#define HFA384X_RID_CNFBASICRATES 0xFCB3
-#define HFA384X_RID_CNFSUPPORTEDRATES 0xFCB4
-#define HFA384X_RID_CNFFALLBACKCTRL 0xFCB5 /* added in STA f/w 1.3.1 */
-#define HFA384X_RID_WEPKEYDISABLE 0xFCB6 /* added in STA f/w 1.3.1 */
-#define HFA384X_RID_WEPKEYMAPINDEX 0xFCB7 /* ? */
-#define HFA384X_RID_BROADCASTKEYID 0xFCB8 /* ? */
-#define HFA384X_RID_ENTSECFLAGEYID 0xFCB9 /* ? */
-#define HFA384X_RID_CNFPASSIVESCANCTRL 0xFCBA /* added in STA f/w 1.5.0 */
-#define HFA384X_RID_SSNHANDLINGMODE 0xFCBB /* added in STA f/w 1.7.0 */
-#define HFA384X_RID_MDCCONTROL 0xFCBC /* added in STA f/w 1.7.0 */
-#define HFA384X_RID_MDCCOUNTRY 0xFCBD /* added in STA f/w 1.7.0 */
-#define HFA384X_RID_TXPOWERMAX 0xFCBE /* added in STA f/w 1.7.0 */
-#define HFA384X_RID_CNFLFOENABLED 0xFCBF /* added in STA f/w 1.6.3 */
-#define HFA384X_RID_CAPINFO 0xFCC0 /* added in STA f/w 1.7.0 */
-#define HFA384X_RID_LISTENINTERVAL 0xFCC1 /* added in STA f/w 1.7.0 */
-#define HFA384X_RID_SW_ANT_DIV 0xFCC2 /* added in STA f/w 1.7.0; Prism3 */
-#define HFA384X_RID_LED_CTRL 0xFCC4 /* added in STA f/w 1.7.6 */
-#define HFA384X_RID_HFODELAY 0xFCC5 /* added in STA f/w 1.7.6 */
-#define HFA384X_RID_DISALLOWEDBSSID 0xFCC6 /* added in STA f/w 1.8.0 */
-#define HFA384X_RID_TICKTIME 0xFCE0
-#define HFA384X_RID_SCANREQUEST 0xFCE1
-#define HFA384X_RID_JOINREQUEST 0xFCE2
-#define HFA384X_RID_AUTHENTICATESTATION 0xFCE3 /* AP f/w only */
-#define HFA384X_RID_CHANNELINFOREQUEST 0xFCE4 /* AP f/w only */
-#define HFA384X_RID_HOSTSCAN 0xFCE5 /* added in STA f/w 1.3.1 */
-
-/* HFA384X Information RIDs */
-#define HFA384X_RID_MAXLOADTIME 0xFD00
-#define HFA384X_RID_DOWNLOADBUFFER 0xFD01
-#define HFA384X_RID_PRIID 0xFD02
-#define HFA384X_RID_PRISUPRANGE 0xFD03
-#define HFA384X_RID_CFIACTRANGES 0xFD04
-#define HFA384X_RID_NICSERNUM 0xFD0A
-#define HFA384X_RID_NICID 0xFD0B
-#define HFA384X_RID_MFISUPRANGE 0xFD0C
-#define HFA384X_RID_CFISUPRANGE 0xFD0D
-#define HFA384X_RID_CHANNELLIST 0xFD10
-#define HFA384X_RID_REGULATORYDOMAINS 0xFD11
-#define HFA384X_RID_TEMPTYPE 0xFD12
-#define HFA384X_RID_CIS 0xFD13
-#define HFA384X_RID_STAID 0xFD20
-#define HFA384X_RID_STASUPRANGE 0xFD21
-#define HFA384X_RID_MFIACTRANGES 0xFD22
-#define HFA384X_RID_CFIACTRANGES2 0xFD23
-#define HFA384X_RID_PRODUCTNAME 0xFD24 /* added in STA f/w 1.3.1;
-					* only Prism2.5(?) */
-#define HFA384X_RID_PORTSTATUS 0xFD40
-#define HFA384X_RID_CURRENTSSID 0xFD41
-#define HFA384X_RID_CURRENTBSSID 0xFD42
-#define HFA384X_RID_COMMSQUALITY 0xFD43
-#define HFA384X_RID_CURRENTTXRATE 0xFD44
-#define HFA384X_RID_CURRENTBEACONINTERVAL 0xFD45
-#define HFA384X_RID_CURRENTSCALETHRESHOLDS 0xFD46
-#define HFA384X_RID_PROTOCOLRSPTIME 0xFD47
-#define HFA384X_RID_SHORTRETRYLIMIT 0xFD48
-#define HFA384X_RID_LONGRETRYLIMIT 0xFD49
-#define HFA384X_RID_MAXTRANSMITLIFETIME 0xFD4A
-#define HFA384X_RID_MAXRECEIVELIFETIME 0xFD4B
-#define HFA384X_RID_CFPOLLABLE 0xFD4C
-#define HFA384X_RID_AUTHENTICATIONALGORITHMS 0xFD4D
-#define HFA384X_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F
-#define HFA384X_RID_DBMCOMMSQUALITY 0xFD51 /* added in STA f/w 1.3.1 */
-#define HFA384X_RID_CURRENTTXRATE1 0xFD80 /* AP f/w only */
-#define HFA384X_RID_CURRENTTXRATE2 0xFD81 /* AP f/w only */
-#define HFA384X_RID_CURRENTTXRATE3 0xFD82 /* AP f/w only */
-#define HFA384X_RID_CURRENTTXRATE4 0xFD83 /* AP f/w only */
-#define HFA384X_RID_CURRENTTXRATE5 0xFD84 /* AP f/w only */
-#define HFA384X_RID_CURRENTTXRATE6 0xFD85 /* AP f/w only */
-#define HFA384X_RID_OWNMACADDR 0xFD86 /* AP f/w only */
-#define HFA384X_RID_SCANRESULTSTABLE 0xFD88 /* added in STA f/w 0.8.3 */
-#define HFA384X_RID_HOSTSCANRESULTS 0xFD89 /* added in STA f/w 1.3.1 */
-#define HFA384X_RID_AUTHENTICATIONUSED 0xFD8A /* added in STA f/w 1.3.4 */
-#define HFA384X_RID_CNFFAASWITCHCTRL 0xFD8B /* added in STA f/w 1.6.3 */
-#define HFA384X_RID_ASSOCIATIONFAILURE 0xFD8D /* added in STA f/w 1.8.0 */
-#define HFA384X_RID_PHYTYPE 0xFDC0
-#define HFA384X_RID_CURRENTCHANNEL 0xFDC1
-#define HFA384X_RID_CURRENTPOWERSTATE 0xFDC2
-#define HFA384X_RID_CCAMODE 0xFDC3
-#define HFA384X_RID_SUPPORTEDDATARATES 0xFDC6
-#define HFA384X_RID_LFO_VOLT_REG_TEST_RES 0xFDC7 /* added in STA f/w 1.7.1 */
-#define HFA384X_RID_BUILDSEQ 0xFFFE
-#define HFA384X_RID_FWID 0xFFFF
-
-
-struct hfa384x_comp_ident
-{
-	__le16 id;
-	__le16 variant;
-	__le16 major;
-	__le16 minor;
-} __packed;
-
-#define HFA384X_COMP_ID_PRI 0x15
-#define HFA384X_COMP_ID_STA 0x1f
-#define HFA384X_COMP_ID_FW_AP 0x14b
-
-struct hfa384x_sup_range
-{
-	__le16 role;
-	__le16 id;
-	__le16 variant;
-	__le16 bottom;
-	__le16 top;
-} __packed;
-
-
-struct hfa384x_build_id
-{
-	__le16 pri_seq;
-	__le16 sec_seq;
-} __packed;
-
-/* FD01 - Download Buffer */
-struct hfa384x_rid_download_buffer
-{
-	__le16 page;
-	__le16 offset;
-	__le16 length;
-} __packed;
-
-/* BSS connection quality (RID FD43 range, RID FD51 dBm-normalized) */
-struct hfa384x_comms_quality {
-	__le16 comm_qual; /* 0 .. 92 */
-	__le16 signal_level; /* 27 .. 154 */
-	__le16 noise_level; /* 27 .. 154 */
-} __packed;
-
-
-/* netdevice private ioctls (used, e.g., with iwpriv from user space) */
-
-/* New wireless extensions API - SET/GET convention (even ioctl numbers are
- * root only)
- */
-#define PRISM2_IOCTL_PRISM2_PARAM (SIOCIWFIRSTPRIV + 0)
-#define PRISM2_IOCTL_GET_PRISM2_PARAM (SIOCIWFIRSTPRIV + 1)
-#define PRISM2_IOCTL_WRITEMIF (SIOCIWFIRSTPRIV + 2)
-#define PRISM2_IOCTL_READMIF (SIOCIWFIRSTPRIV + 3)
-#define PRISM2_IOCTL_MONITOR (SIOCIWFIRSTPRIV + 4)
-#define PRISM2_IOCTL_RESET (SIOCIWFIRSTPRIV + 6)
-#define PRISM2_IOCTL_INQUIRE (SIOCIWFIRSTPRIV + 8)
-#define PRISM2_IOCTL_WDS_ADD (SIOCIWFIRSTPRIV + 10)
-#define PRISM2_IOCTL_WDS_DEL (SIOCIWFIRSTPRIV + 12)
-#define PRISM2_IOCTL_SET_RID_WORD (SIOCIWFIRSTPRIV + 14)
-#define PRISM2_IOCTL_MACCMD (SIOCIWFIRSTPRIV + 16)
-#define PRISM2_IOCTL_ADDMAC (SIOCIWFIRSTPRIV + 18)
-#define PRISM2_IOCTL_DELMAC (SIOCIWFIRSTPRIV + 20)
-#define PRISM2_IOCTL_KICKMAC (SIOCIWFIRSTPRIV + 22)
-
-/* following are not in SIOCGIWPRIV list; check permission in the driver code
- */
-#define PRISM2_IOCTL_DOWNLOAD (SIOCDEVPRIVATE + 13)
-#define PRISM2_IOCTL_HOSTAPD (SIOCDEVPRIVATE + 14)
-
-
-/* PRISM2_IOCTL_PRISM2_PARAM ioctl() subtypes: */
-enum {
-	/* PRISM2_PARAM_PTYPE = 1, */ /* REMOVED 2003-10-22 */
-	PRISM2_PARAM_TXRATECTRL = 2,
-	PRISM2_PARAM_BEACON_INT = 3,
-	PRISM2_PARAM_PSEUDO_IBSS = 4,
-	PRISM2_PARAM_ALC = 5,
-	/* PRISM2_PARAM_TXPOWER = 6, */ /* REMOVED 2003-10-22 */
-	PRISM2_PARAM_DUMP = 7,
-	PRISM2_PARAM_OTHER_AP_POLICY = 8,
-	PRISM2_PARAM_AP_MAX_INACTIVITY = 9,
-	PRISM2_PARAM_AP_BRIDGE_PACKETS = 10,
-	PRISM2_PARAM_DTIM_PERIOD = 11,
-	PRISM2_PARAM_AP_NULLFUNC_ACK = 12,
-	PRISM2_PARAM_MAX_WDS = 13,
-	PRISM2_PARAM_AP_AUTOM_AP_WDS = 14,
-	PRISM2_PARAM_AP_AUTH_ALGS = 15,
-	PRISM2_PARAM_MONITOR_ALLOW_FCSERR = 16,
-	PRISM2_PARAM_HOST_ENCRYPT = 17,
-	PRISM2_PARAM_HOST_DECRYPT = 18,
-	/* PRISM2_PARAM_BUS_MASTER_THRESHOLD_RX = 19, REMOVED 2005-08-14 */
-	/* PRISM2_PARAM_BUS_MASTER_THRESHOLD_TX = 20, REMOVED 2005-08-14 */
-	PRISM2_PARAM_HOST_ROAMING = 21,
-	PRISM2_PARAM_BCRX_STA_KEY = 22,
-	PRISM2_PARAM_IEEE_802_1X = 23,
-	PRISM2_PARAM_ANTSEL_TX = 24,
-	PRISM2_PARAM_ANTSEL_RX = 25,
-	PRISM2_PARAM_MONITOR_TYPE = 26,
-	PRISM2_PARAM_WDS_TYPE = 27,
-	PRISM2_PARAM_HOSTSCAN = 28,
-	PRISM2_PARAM_AP_SCAN = 29,
-	PRISM2_PARAM_ENH_SEC = 30,
-	PRISM2_PARAM_IO_DEBUG = 31,
-	PRISM2_PARAM_BASIC_RATES = 32,
-	PRISM2_PARAM_OPER_RATES = 33,
-	PRISM2_PARAM_HOSTAPD = 34,
-	PRISM2_PARAM_HOSTAPD_STA = 35,
-	PRISM2_PARAM_WPA = 36,
-	PRISM2_PARAM_PRIVACY_INVOKED = 37,
-	PRISM2_PARAM_TKIP_COUNTERMEASURES = 38,
-	PRISM2_PARAM_DROP_UNENCRYPTED = 39,
-	PRISM2_PARAM_SCAN_CHANNEL_MASK = 40,
-};
-
-enum { HOSTAP_ANTSEL_DO_NOT_TOUCH = 0, HOSTAP_ANTSEL_DIVERSITY = 1,
-       HOSTAP_ANTSEL_LOW = 2, HOSTAP_ANTSEL_HIGH = 3 };
-
-
-/* PRISM2_IOCTL_MACCMD ioctl() subcommands: */
-enum { AP_MAC_CMD_POLICY_OPEN = 0, AP_MAC_CMD_POLICY_ALLOW = 1,
-       AP_MAC_CMD_POLICY_DENY = 2, AP_MAC_CMD_FLUSH = 3,
-       AP_MAC_CMD_KICKALL = 4 };
-
-
-/* PRISM2_IOCTL_DOWNLOAD ioctl() dl_cmd: */
-enum {
-	PRISM2_DOWNLOAD_VOLATILE = 1 /* RAM */,
-	/* Note! Old versions of prism2_srec have a fatal error in CRC-16
-	 * calculation, which will corrupt all non-volatile downloads.
-	 * PRISM2_DOWNLOAD_NON_VOLATILE used to be 2, but it is now 3 to
-	 * prevent use of old versions of prism2_srec for non-volatile
-	 * download. */
-	PRISM2_DOWNLOAD_NON_VOLATILE = 3 /* FLASH */,
-	PRISM2_DOWNLOAD_VOLATILE_GENESIS = 4 /* RAM in Genesis mode */,
-	/* Persistent versions of volatile download commands (keep firmware
-	 * data in memory and automatically re-download after hw_reset */
-	PRISM2_DOWNLOAD_VOLATILE_PERSISTENT = 5,
-	PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT = 6,
-};
-
-struct prism2_download_param {
-	u32 dl_cmd;
-	u32 start_addr;
-	u32 num_areas;
-	struct prism2_download_area {
-		u32 addr; /* wlan card address */
-		u32 len;
-		void __user *ptr; /* pointer to data in user space */
-	} data[];
-};
-
-#define PRISM2_MAX_DOWNLOAD_AREA_LEN 131072
-#define PRISM2_MAX_DOWNLOAD_LEN 262144
-
-
-/* PRISM2_IOCTL_HOSTAPD ioctl() cmd: */
-enum {
-	PRISM2_HOSTAPD_FLUSH = 1,
-	PRISM2_HOSTAPD_ADD_STA = 2,
-	PRISM2_HOSTAPD_REMOVE_STA = 3,
-	PRISM2_HOSTAPD_GET_INFO_STA = 4,
-	/* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */
-	PRISM2_SET_ENCRYPTION = 6,
-	PRISM2_GET_ENCRYPTION = 7,
-	PRISM2_HOSTAPD_SET_FLAGS_STA = 8,
-	PRISM2_HOSTAPD_GET_RID = 9,
-	PRISM2_HOSTAPD_SET_RID = 10,
-	PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR = 11,
-	PRISM2_HOSTAPD_SET_GENERIC_ELEMENT = 12,
-	PRISM2_HOSTAPD_MLME = 13,
-	PRISM2_HOSTAPD_SCAN_REQ = 14,
-	PRISM2_HOSTAPD_STA_CLEAR_STATS = 15,
-};
-
-#define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024
-#define PRISM2_HOSTAPD_RID_HDR_LEN \
-offsetof(struct prism2_hostapd_param, u.rid.data)
-#define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \
-offsetof(struct prism2_hostapd_param, u.generic_elem.data)
-
-/* Maximum length for algorithm names (-1 for nul termination) used in ioctl()
- */
-#define HOSTAP_CRYPT_ALG_NAME_LEN 16
-
-
-struct prism2_hostapd_param {
-	u32 cmd;
-	u8 sta_addr[ETH_ALEN];
-	union {
-		struct {
-			u16 aid;
-			u16 capability;
-			u8 tx_supp_rates;
-		} add_sta;
-		struct {
-			u32 inactive_sec;
-		} get_info_sta;
-		struct {
-			u8 alg[HOSTAP_CRYPT_ALG_NAME_LEN];
-			u32 flags;
-			u32 err;
-			u8 idx;
-			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
-			u16 key_len;
-			u8 key[0];
-		} crypt;
-		struct {
-			u32 flags_and;
-			u32 flags_or;
-		} set_flags_sta;
-		struct {
-			u16 rid;
-			u16 len;
-			u8 data[0];
-		} rid;
-		struct {
-			u8 len;
-			u8 data[0];
-		} generic_elem;
-		struct {
-#define MLME_STA_DEAUTH 0
-#define MLME_STA_DISASSOC 1
-			u16 cmd;
-			u16 reason_code;
-		} mlme;
-		struct {
-			u8 ssid_len;
-			u8 ssid[32];
-		} scan_req;
-	} u;
-};
-
-#define HOSTAP_CRYPT_FLAG_SET_TX_KEY BIT(0)
-#define HOSTAP_CRYPT_FLAG_PERMANENT BIT(1)
-
-#define HOSTAP_CRYPT_ERR_UNKNOWN_ALG 2
-#define HOSTAP_CRYPT_ERR_UNKNOWN_ADDR 3
-#define HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED 4
-#define HOSTAP_CRYPT_ERR_KEY_SET_FAILED 5
-#define HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED 6
-#define HOSTAP_CRYPT_ERR_CARD_CONF_FAILED 7
-
-
-#endif /* HOSTAP_COMMON_H */
diff --git a/drivers/net/wireless/intersil/hostap/hostap_config.h b/drivers/net/wireless/intersil/hostap/hostap_config.h
deleted file mode 100644
index 3ebd55847f..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_config.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_CONFIG_H
-#define HOSTAP_CONFIG_H
-
-/* In the previous versions of Host AP driver, support for user space version
- * of IEEE 802.11 management (hostapd) used to be disabled in the default
- * configuration. From now on, support for hostapd is always included and it is
- * possible to disable kernel driver version of IEEE 802.11 management with a
- * separate define, PRISM2_NO_KERNEL_IEEE80211_MGMT. */
-/* #define PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-/* Maximum number of events handler per one interrupt */
-#define PRISM2_MAX_INTERRUPT_EVENTS 20
-
-/* Include code for downloading firmware images into volatile RAM. */
-#define PRISM2_DOWNLOAD_SUPPORT
-
-/* Allow kernel configuration to enable download support. */
-#if !defined(PRISM2_DOWNLOAD_SUPPORT) && defined(CONFIG_HOSTAP_FIRMWARE)
-#define PRISM2_DOWNLOAD_SUPPORT
-#endif
-
-/* Allow kernel configuration to enable non-volatile download support. */
-#ifdef CONFIG_HOSTAP_FIRMWARE_NVRAM
-#define PRISM2_NON_VOLATILE_DOWNLOAD
-#endif
-
-/* Save low-level I/O for debugging. This should not be enabled in normal use.
- */
-/* #define PRISM2_IO_DEBUG */
-
-/* Following defines can be used to remove unneeded parts of the driver, e.g.,
- * to limit the size of the kernel module. Definitions can be added here in
- * hostap_config.h or they can be added to make command with ccflags-y,
- * e.g.,
- * 'make pccard ccflags-y="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"'
- */
-
-/* Do not include debug messages into the driver */
-/* #define PRISM2_NO_DEBUG */
-
-/* Do not include /proc/net/prism2/wlan#/{registers,debug} */
-/* #define PRISM2_NO_PROCFS_DEBUG */
-
-/* Do not include station functionality (i.e., allow only Master (Host AP) mode
- */
-/* #define PRISM2_NO_STATION_MODES */
-
-#endif /* HOSTAP_CONFIG_H */
diff --git a/drivers/net/wireless/intersil/hostap/hostap_cs.c b/drivers/net/wireless/intersil/hostap/hostap_cs.c
deleted file mode 100644
index ec7db2badc..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_cs.c
+++ /dev/null
@@ -1,710 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#define PRISM2_PCCARD
-
-#include <linux/module.h>
-#include <linux/if.h>
-#include <linux/slab.h>
-#include <linux/wait.h>
-#include <linux/timer.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/workqueue.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include <asm/io.h>
-
-#include "hostap_wlan.h"
-
-
-static char *dev_info = "hostap_cs";
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
-		   "cards (PC Card).");
-MODULE_LICENSE("GPL");
-
-
-static int ignore_cis_vcc;
-module_param(ignore_cis_vcc, int, 0444);
-MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry");
-
-
-/* struct local_info::hw_priv */
-struct hostap_cs_priv {
-	struct pcmcia_device *link;
-	int sandisk_connectplus;
-};
-
-
-#ifdef PRISM2_IO_DEBUG
-
-static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
-	outb(v, dev->base_addr + a);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-	u8 v;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	spin_lock_irqsave(&local->lock, flags);
-	v = inb(dev->base_addr + a);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
-	spin_unlock_irqrestore(&local->lock, flags);
-	return v;
-}
-
-static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
-	outw(v, dev->base_addr + a);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-	u16 v;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	spin_lock_irqsave(&local->lock, flags);
-	v = inw(dev->base_addr + a);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
-	spin_unlock_irqrestore(&local->lock, flags);
-	return v;
-}
-
-static inline void hfa384x_outsw_debug(struct net_device *dev, int a,
-				       u8 *buf, int wc)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc);
-	outsw(dev->base_addr + a, buf, wc);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-static inline void hfa384x_insw_debug(struct net_device *dev, int a,
-				      u8 *buf, int wc)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc);
-	insw(dev->base_addr + a, buf, wc);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
-#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
-#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
-#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
-#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc))
-#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc))
-
-#else /* PRISM2_IO_DEBUG */
-
-#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a))
-#define HFA384X_INB(a) inb(dev->base_addr + (a))
-#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a))
-#define HFA384X_INW(a) inw(dev->base_addr + (a))
-#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc)
-#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc)
-
-#endif /* PRISM2_IO_DEBUG */
-
-
-static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
-			    int len)
-{
-	u16 d_off;
-	u16 *pos;
-
-	d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
-	pos = (u16 *) buf;
-
-	if (len / 2)
-		HFA384X_INSW(d_off, buf, len / 2);
-	pos += len / 2;
-
-	if (len & 1)
-		*((char *) pos) = HFA384X_INB(d_off);
-
-	return 0;
-}
-
-
-static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
-{
-	u16 d_off;
-	u16 *pos;
-
-	d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
-	pos = (u16 *) buf;
-
-	if (len / 2)
-		HFA384X_OUTSW(d_off, buf, len / 2);
-	pos += len / 2;
-
-	if (len & 1)
-		HFA384X_OUTB(*((char *) pos), d_off);
-
-	return 0;
-}
-
-
-/* FIX: This might change at some point.. */
-#include "hostap_hw.c"
-
-
-
-static void prism2_detach(struct pcmcia_device *p_dev);
-static void prism2_release(u_long arg);
-static int prism2_config(struct pcmcia_device *link);
-
-
-static int prism2_pccard_card_present(local_info_t *local)
-{
-	struct hostap_cs_priv *hw_priv = local->hw_priv;
-	if (hw_priv != NULL && hw_priv->link != NULL && pcmcia_dev_present(hw_priv->link))
-		return 1;
-	return 0;
-}
-
-
-/*
- * SanDisk CompactFlash WLAN Flashcard - Product Manual v1.0
- * Document No. 20-10-00058, January 2004
- * http://www.sandisk.com/pdf/industrial/ProdManualCFWLANv1.0.pdf
- */
-#define SANDISK_WLAN_ACTIVATION_OFF 0x40
-#define SANDISK_HCR_OFF 0x42
-
-
-static void sandisk_set_iobase(local_info_t *local)
-{
-	int res;
-	struct hostap_cs_priv *hw_priv = local->hw_priv;
-
-	res = pcmcia_write_config_byte(hw_priv->link, 0x10,
-				hw_priv->link->resource[0]->start & 0x00ff);
-	if (res != 0) {
-		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
-		       " res=%d\n", res);
-	}
-	udelay(10);
-
-	res = pcmcia_write_config_byte(hw_priv->link, 0x12,
-				(hw_priv->link->resource[0]->start >> 8) & 0x00ff);
-	if (res != 0) {
-		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
-		       " res=%d\n", res);
-	}
-}
-
-
-static void sandisk_write_hcr(local_info_t *local, int hcr)
-{
-	struct net_device *dev = local->dev;
-	int i;
-
-	HFA384X_OUTB(0x80, SANDISK_WLAN_ACTIVATION_OFF);
-	udelay(50);
-	for (i = 0; i < 10; i++) {
-		HFA384X_OUTB(hcr, SANDISK_HCR_OFF);
-	}
-	udelay(55);
-	HFA384X_OUTB(0x45, SANDISK_WLAN_ACTIVATION_OFF);
-}
-
-
-static int sandisk_enable_wireless(struct net_device *dev)
-{
-	int res, ret = 0;
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-	struct hostap_cs_priv *hw_priv = local->hw_priv;
-
-	if (resource_size(hw_priv->link->resource[0]) < 0x42) {
-		/* Not enough ports to be SanDisk multi-function card */
-		ret = -ENODEV;
-		goto done;
-	}
-
-	if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
-		/* No SanDisk manfid found */
-		ret = -ENODEV;
-		goto done;
-	}
-
-	if (hw_priv->link->socket->functions < 2) {
-		/* No multi-function links found */
-		ret = -ENODEV;
-		goto done;
-	}
-
-	printk(KERN_DEBUG "%s: Multi-function SanDisk ConnectPlus detected"
-	       " - using vendor-specific initialization\n", dev->name);
-	hw_priv->sandisk_connectplus = 1;
-
-	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
-				COR_SOFT_RESET);
-	if (res != 0) {
-		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
-		       dev->name, res);
-		goto done;
-	}
-	mdelay(5);
-
-	/*
-	 * Do not enable interrupts here to avoid some bogus events. Interrupts
-	 * will be enabled during the first cor_sreset call.
-	 */
-	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
-				(COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE |
-					COR_FUNC_ENA));
-	if (res != 0) {
-		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
-		       dev->name, res);
-		goto done;
-	}
-	mdelay(5);
-
-	sandisk_set_iobase(local);
-
-	HFA384X_OUTB(0xc5, SANDISK_WLAN_ACTIVATION_OFF);
-	udelay(10);
-	HFA384X_OUTB(0x4b, SANDISK_WLAN_ACTIVATION_OFF);
-	udelay(10);
-
-done:
-	return ret;
-}
-
-
-static void prism2_pccard_cor_sreset(local_info_t *local)
-{
-	int res;
-	u8 val;
-	struct hostap_cs_priv *hw_priv = local->hw_priv;
-
-	if (!prism2_pccard_card_present(local))
-	       return;
-
-	res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &val);
-	if (res != 0) {
-		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
-		       res);
-		return;
-	}
-	printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
-		val);
-
-	val |= COR_SOFT_RESET;
-	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
-	if (res != 0) {
-		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
-		       res);
-		return;
-	}
-
-	mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
-
-	val &= ~COR_SOFT_RESET;
-	if (hw_priv->sandisk_connectplus)
-		val |= COR_IREQ_ENA;
-	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
-	if (res != 0) {
-		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
-		       res);
-		return;
-	}
-
-	mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
-
-	if (hw_priv->sandisk_connectplus)
-		sandisk_set_iobase(local);
-}
-
-
-static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
-{
-	int res;
-	u8 old_cor;
-	struct hostap_cs_priv *hw_priv = local->hw_priv;
-
-	if (!prism2_pccard_card_present(local))
-	       return;
-
-	if (hw_priv->sandisk_connectplus) {
-		sandisk_write_hcr(local, hcr);
-		return;
-	}
-
-	res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &old_cor);
-	if (res != 0) {
-		printk(KERN_DEBUG "%s failed 1 (%d)\n", __func__, res);
-		return;
-	}
-	printk(KERN_DEBUG "%s: original COR %02x\n", __func__, old_cor);
-
-	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
-				old_cor | COR_SOFT_RESET);
-	if (res != 0) {
-		printk(KERN_DEBUG "%s failed 2 (%d)\n", __func__, res);
-		return;
-	}
-
-	mdelay(10);
-
-	/* Setup Genesis mode */
-	res = pcmcia_write_config_byte(hw_priv->link, CISREG_CCSR, hcr);
-	if (res != 0) {
-		printk(KERN_DEBUG "%s failed 3 (%d)\n", __func__, res);
-		return;
-	}
-	mdelay(10);
-
-	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
-				old_cor & ~COR_SOFT_RESET);
-	if (res != 0) {
-		printk(KERN_DEBUG "%s failed 4 (%d)\n", __func__, res);
-		return;
-	}
-
-	mdelay(10);
-}
-
-
-static struct prism2_helper_functions prism2_pccard_funcs =
-{
-	.card_present	= prism2_pccard_card_present,
-	.cor_sreset	= prism2_pccard_cor_sreset,
-	.genesis_reset	= prism2_pccard_genesis_reset,
-	.hw_type	= HOSTAP_HW_PCCARD,
-};
-
-
-/* allocate local data and register with CardServices
- * initialize dev_link structure, but do not configure the card yet */
-static int hostap_cs_probe(struct pcmcia_device *p_dev)
-{
-	int ret;
-
-	PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
-
-	ret = prism2_config(p_dev);
-	if (ret) {
-		PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
-	}
-
-	return ret;
-}
-
-
-static void prism2_detach(struct pcmcia_device *link)
-{
-	PDEBUG(DEBUG_FLOW, "prism2_detach\n");
-
-	prism2_release((u_long)link);
-
-	/* release net devices */
-	if (link->priv) {
-		struct hostap_cs_priv *hw_priv;
-		struct net_device *dev;
-		struct hostap_interface *iface;
-		dev = link->priv;
-		iface = netdev_priv(dev);
-		hw_priv = iface->local->hw_priv;
-		prism2_free_local_data(dev);
-		kfree(hw_priv);
-	}
-}
-
-
-static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
-	if (p_dev->config_index == 0)
-		return -EINVAL;
-
-	return pcmcia_request_io(p_dev);
-}
-
-static int prism2_config(struct pcmcia_device *link)
-{
-	struct net_device *dev;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int ret;
-	struct hostap_cs_priv *hw_priv;
-	unsigned long flags;
-
-	PDEBUG(DEBUG_FLOW, "prism2_config()\n");
-
-	hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
-	if (hw_priv == NULL) {
-		ret = -ENOMEM;
-		goto failed;
-	}
-
-	/* Look for an appropriate configuration table entry in the CIS */
-	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO |
-		CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
-	if (ignore_cis_vcc)
-		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
-	ret = pcmcia_loop_config(link, prism2_config_check, NULL);
-	if (ret) {
-		if (!ignore_cis_vcc)
-			printk(KERN_ERR "GetNextTuple(): No matching "
-			       "CIS configuration.  Maybe you need the "
-			       "ignore_cis_vcc=1 parameter.\n");
-		goto failed;
-	}
-
-	/* Need to allocate net_device before requesting IRQ handler */
-	dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
-				     &link->dev);
-	if (!dev) {
-		ret = -ENOMEM;
-		goto failed;
-	}
-	link->priv = dev;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	local->hw_priv = hw_priv;
-	hw_priv->link = link;
-
-	/*
-	 * We enable IRQ here, but IRQ handler will not proceed
-	 * until dev->base_addr is set below. This protect us from
-	 * receive interrupts when driver is not initialized.
-	 */
-	ret = pcmcia_request_irq(link, prism2_interrupt);
-	if (ret)
-		goto failed;
-
-	ret = pcmcia_enable_device(link);
-	if (ret)
-		goto failed;
-
-	spin_lock_irqsave(&local->irq_init_lock, flags);
-	dev->irq = link->irq;
-	dev->base_addr = link->resource[0]->start;
-	spin_unlock_irqrestore(&local->irq_init_lock, flags);
-
-	local->shutdown = 0;
-
-	sandisk_enable_wireless(dev);
-
-	ret = prism2_hw_config(dev, 1);
-	if (!ret)
-		ret = hostap_hw_ready(dev);
-
-	return ret;
-
- failed:
-	kfree(hw_priv);
-	prism2_release((u_long)link);
-	return ret;
-}
-
-
-static void prism2_release(u_long arg)
-{
-	struct pcmcia_device *link = (struct pcmcia_device *)arg;
-
-	PDEBUG(DEBUG_FLOW, "prism2_release\n");
-
-	if (link->priv) {
-		struct net_device *dev = link->priv;
-		struct hostap_interface *iface;
-
-		iface = netdev_priv(dev);
-		prism2_hw_shutdown(dev, 0);
-		iface->local->shutdown = 1;
-	}
-
-	pcmcia_disable_device(link);
-	PDEBUG(DEBUG_FLOW, "release - done\n");
-}
-
-static int hostap_cs_suspend(struct pcmcia_device *link)
-{
-	struct net_device *dev = (struct net_device *) link->priv;
-	int dev_open = 0;
-	struct hostap_interface *iface = NULL;
-
-	if (!dev)
-		return -ENODEV;
-
-	iface = netdev_priv(dev);
-
-	PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
-	if (iface && iface->local)
-		dev_open = iface->local->num_dev_open > 0;
-	if (dev_open) {
-		netif_stop_queue(dev);
-		netif_device_detach(dev);
-	}
-	prism2_suspend(dev);
-
-	return 0;
-}
-
-static int hostap_cs_resume(struct pcmcia_device *link)
-{
-	struct net_device *dev = (struct net_device *) link->priv;
-	int dev_open = 0;
-	struct hostap_interface *iface = NULL;
-
-	if (!dev)
-		return -ENODEV;
-
-	iface = netdev_priv(dev);
-
-	PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
-
-	if (iface && iface->local)
-		dev_open = iface->local->num_dev_open > 0;
-
-	prism2_hw_shutdown(dev, 1);
-	prism2_hw_config(dev, dev_open ? 0 : 1);
-	if (dev_open) {
-		netif_device_attach(dev);
-		netif_start_queue(dev);
-	}
-
-	return 0;
-}
-
-static const struct pcmcia_device_id hostap_cs_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
-	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
-	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
-	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3301),
-	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613),
-	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001),
-	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
-	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
-/*	PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000),    conflict with pcnet_cs */
-	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
-	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0xd601, 0x0005, "ADLINK 345 CF",
-					 0x2d858104),
-	PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
-					 0x74c5e40d),
-	PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
-					 0x4b801a17),
-	PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.02",
-					 0x4b74baa0),
-	PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
-				    0x7a954bd9, 0x74be00c6),
-	PCMCIA_DEVICE_PROD_ID123(
-		"Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
-		0xe6ec52ce, 0x08649af2, 0x4b74baa0),
-	PCMCIA_DEVICE_PROD_ID123(
-		"Canon", "Wireless LAN CF Card K30225", "Version 01.00",
-		0x96ef6fe2, 0x263fcbab, 0xa57adb8c),
-	PCMCIA_DEVICE_PROD_ID123(
-		"D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02",
-		0x71b18589, 0xb6f1b0ab, 0x4b74baa0),
-	PCMCIA_DEVICE_PROD_ID123(
-		"Instant Wireless ", " Network PC CARD", "Version 01.02",
-		0x11d901af, 0x6e9bd926, 0x4b74baa0),
-	PCMCIA_DEVICE_PROD_ID123(
-		"SMC", "SMC2632W", "Version 01.02",
-		0xc4f8b18b, 0x474a1f2a, 0x4b74baa0),
-	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 
-				0x2decece3, 0x82067c18),
-	PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card",
-				0x54f7c49c, 0x15a75e5b),
-	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE",
-				0x74c5e40d, 0xdb472a18),
-	PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card",
-				0x0733cc81, 0x0c52f395),
-	PCMCIA_DEVICE_PROD_ID12(
-		"ZoomAir 11Mbps High", "Rate wireless Networking",
-		0x273fe3db, 0x32a1eaee),
-	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card",
-		0xa37434e9, 0x9762e8f1),
-	PCMCIA_DEVICE_PROD_ID123(
-		"Pretec", "CompactWLAN Card 802.11b", "2.5",
-		0x1cadd3e5, 0xe697636c, 0x7a5bfcf1),
-	PCMCIA_DEVICE_PROD_ID123(
-		"U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02",
-		0xc7b8df9d, 0x1700d087, 0x4b74baa0),
-	PCMCIA_DEVICE_PROD_ID123(
-		"Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio",
-		"Ver. 1.00",
-		0x5cd01705, 0x4271660f, 0x9d08ee12),
-	PCMCIA_DEVICE_PROD_ID123(
-		"Wireless LAN" , "11Mbps PC Card", "Version 01.02",
-		0x4b8870ff, 0x70e946d1, 0x4b74baa0),
-	PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
-	PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
-	PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
-	PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
-	PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
-
-
-static struct pcmcia_driver hostap_driver = {
-	.name		= "hostap_cs",
-	.probe		= hostap_cs_probe,
-	.remove		= prism2_detach,
-	.owner		= THIS_MODULE,
-	.id_table	= hostap_cs_ids,
-	.suspend	= hostap_cs_suspend,
-	.resume		= hostap_cs_resume,
-};
-module_pcmcia_driver(hostap_driver);
diff --git a/drivers/net/wireless/intersil/hostap/hostap_download.c b/drivers/net/wireless/intersil/hostap/hostap_download.c
deleted file mode 100644
index 5e5bada28b..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_download.c
+++ /dev/null
@@ -1,810 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-static int prism2_enable_aux_port(struct net_device *dev, int enable)
-{
-	u16 val, reg;
-	int i, tries;
-	unsigned long flags;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->no_pri) {
-		if (enable) {
-			PDEBUG(DEBUG_EXTRA2, "%s: no PRI f/w - assuming Aux "
-			       "port is already enabled\n", dev->name);
-		}
-		return 0;
-	}
-
-	spin_lock_irqsave(&local->cmdlock, flags);
-
-	/* wait until busy bit is clear */
-	tries = HFA384X_CMD_BUSY_TIMEOUT;
-	while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) {
-		tries--;
-		udelay(1);
-	}
-	if (tries == 0) {
-		reg = HFA384X_INW(HFA384X_CMD_OFF);
-		spin_unlock_irqrestore(&local->cmdlock, flags);
-		printk("%s: prism2_enable_aux_port - timeout - reg=0x%04x\n",
-		       dev->name, reg);
-		return -ETIMEDOUT;
-	}
-
-	val = HFA384X_INW(HFA384X_CONTROL_OFF);
-
-	if (enable) {
-		HFA384X_OUTW(HFA384X_AUX_MAGIC0, HFA384X_PARAM0_OFF);
-		HFA384X_OUTW(HFA384X_AUX_MAGIC1, HFA384X_PARAM1_OFF);
-		HFA384X_OUTW(HFA384X_AUX_MAGIC2, HFA384X_PARAM2_OFF);
-
-		if ((val & HFA384X_AUX_PORT_MASK) != HFA384X_AUX_PORT_DISABLED)
-			printk("prism2_enable_aux_port: was not disabled!?\n");
-		val &= ~HFA384X_AUX_PORT_MASK;
-		val |= HFA384X_AUX_PORT_ENABLE;
-	} else {
-		HFA384X_OUTW(0, HFA384X_PARAM0_OFF);
-		HFA384X_OUTW(0, HFA384X_PARAM1_OFF);
-		HFA384X_OUTW(0, HFA384X_PARAM2_OFF);
-
-		if ((val & HFA384X_AUX_PORT_MASK) != HFA384X_AUX_PORT_ENABLED)
-			printk("prism2_enable_aux_port: was not enabled!?\n");
-		val &= ~HFA384X_AUX_PORT_MASK;
-		val |= HFA384X_AUX_PORT_DISABLE;
-	}
-	HFA384X_OUTW(val, HFA384X_CONTROL_OFF);
-
-	udelay(5);
-
-	i = 10000;
-	while (i > 0) {
-		val = HFA384X_INW(HFA384X_CONTROL_OFF);
-		val &= HFA384X_AUX_PORT_MASK;
-
-		if ((enable && val == HFA384X_AUX_PORT_ENABLED) ||
-		    (!enable && val == HFA384X_AUX_PORT_DISABLED))
-			break;
-
-		udelay(10);
-		i--;
-	}
-
-	spin_unlock_irqrestore(&local->cmdlock, flags);
-
-	if (i == 0) {
-		printk("prism2_enable_aux_port(%d) timed out\n",
-		       enable);
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-
-static int hfa384x_from_aux(struct net_device *dev, unsigned int addr, int len,
-			    void *buf)
-{
-	u16 page, offset;
-	if (addr & 1 || len & 1)
-		return -1;
-
-	page = addr >> 7;
-	offset = addr & 0x7f;
-
-	HFA384X_OUTW(page, HFA384X_AUXPAGE_OFF);
-	HFA384X_OUTW(offset, HFA384X_AUXOFFSET_OFF);
-
-	udelay(5);
-
-#ifdef PRISM2_PCI
-	{
-		__le16 *pos = (__le16 *) buf;
-		while (len > 0) {
-			*pos++ = HFA384X_INW_DATA(HFA384X_AUXDATA_OFF);
-			len -= 2;
-		}
-	}
-#else /* PRISM2_PCI */
-	HFA384X_INSW(HFA384X_AUXDATA_OFF, buf, len / 2);
-#endif /* PRISM2_PCI */
-
-	return 0;
-}
-
-
-static int hfa384x_to_aux(struct net_device *dev, unsigned int addr, int len,
-			  void *buf)
-{
-	u16 page, offset;
-	if (addr & 1 || len & 1)
-		return -1;
-
-	page = addr >> 7;
-	offset = addr & 0x7f;
-
-	HFA384X_OUTW(page, HFA384X_AUXPAGE_OFF);
-	HFA384X_OUTW(offset, HFA384X_AUXOFFSET_OFF);
-
-	udelay(5);
-
-#ifdef PRISM2_PCI
-	{
-		__le16 *pos = (__le16 *) buf;
-		while (len > 0) {
-			HFA384X_OUTW_DATA(*pos++, HFA384X_AUXDATA_OFF);
-			len -= 2;
-		}
-	}
-#else /* PRISM2_PCI */
-	HFA384X_OUTSW(HFA384X_AUXDATA_OFF, buf, len / 2);
-#endif /* PRISM2_PCI */
-
-	return 0;
-}
-
-
-static int prism2_pda_ok(u8 *buf)
-{
-	__le16 *pda = (__le16 *) buf;
-	int pos;
-	u16 len, pdr;
-
-	if (buf[0] == 0xff && buf[1] == 0x00 && buf[2] == 0xff &&
-	    buf[3] == 0x00)
-		return 0;
-
-	pos = 0;
-	while (pos + 1 < PRISM2_PDA_SIZE / 2) {
-		len = le16_to_cpu(pda[pos]);
-		pdr = le16_to_cpu(pda[pos + 1]);
-		if (len == 0 || pos + len > PRISM2_PDA_SIZE / 2)
-			return 0;
-
-		if (pdr == 0x0000 && len == 2) {
-			/* PDA end found */
-			return 1;
-		}
-
-		pos += len + 1;
-	}
-
-	return 0;
-}
-
-
-#define prism2_download_aux_dump_npages 65536
-
-struct prism2_download_aux_dump {
-	local_info_t *local;
-	u16 page[0x80];
-};
-
-static int prism2_download_aux_dump_proc_show(struct seq_file *m, void *v)
-{
-	struct prism2_download_aux_dump *ctx = m->private;
-
-	hfa384x_from_aux(ctx->local->dev, (unsigned long)v - 1, 0x80, ctx->page);
-	seq_write(m, ctx->page, 0x80);
-	return 0;
-}
-
-static void *prism2_download_aux_dump_proc_start(struct seq_file *m, loff_t *_pos)
-{
-	struct prism2_download_aux_dump *ctx = m->private;
-	prism2_enable_aux_port(ctx->local->dev, 1);
-	if (*_pos >= prism2_download_aux_dump_npages)
-		return NULL;
-	return (void *)((unsigned long)*_pos + 1);
-}
-
-static void *prism2_download_aux_dump_proc_next(struct seq_file *m, void *v, loff_t *_pos)
-{
-	++*_pos;
-	if (*_pos >= prism2_download_aux_dump_npages)
-		return NULL;
-	return (void *)((unsigned long)*_pos + 1);
-}
-
-static void prism2_download_aux_dump_proc_stop(struct seq_file *m, void *v)
-{
-	struct prism2_download_aux_dump *ctx = m->private;
-	prism2_enable_aux_port(ctx->local->dev, 0);
-}
-
-static const struct seq_operations prism2_download_aux_dump_proc_seqops = {
-	.start	= prism2_download_aux_dump_proc_start,
-	.next	= prism2_download_aux_dump_proc_next,
-	.stop	= prism2_download_aux_dump_proc_stop,
-	.show	= prism2_download_aux_dump_proc_show,
-};
-
-static int prism2_download_aux_dump_proc_open(struct inode *inode, struct file *file)
-{
-	int ret = seq_open_private(file, &prism2_download_aux_dump_proc_seqops,
-				   sizeof(struct prism2_download_aux_dump));
-	if (ret == 0) {
-		struct seq_file *m = file->private_data;
-		m->private = pde_data(inode);
-	}
-	return ret;
-}
-
-static const struct proc_ops prism2_download_aux_dump_proc_ops = {
-	.proc_open		= prism2_download_aux_dump_proc_open,
-	.proc_read		= seq_read,
-	.proc_lseek		= seq_lseek,
-	.proc_release		= seq_release_private,
-};
-
-
-static u8 * prism2_read_pda(struct net_device *dev)
-{
-	u8 *buf;
-	int res, i, found = 0;
-#define NUM_PDA_ADDRS 4
-	unsigned int pda_addr[NUM_PDA_ADDRS] = {
-		0x7f0000 /* others than HFA3841 */,
-		0x3f0000 /* HFA3841 */,
-		0x390000 /* apparently used in older cards */,
-		0x7f0002 /* Intel PRO/Wireless 2011B (PCI) */,
-	};
-
-	buf = kmalloc(PRISM2_PDA_SIZE, GFP_KERNEL);
-	if (buf == NULL)
-		return NULL;
-
-	/* Note: wlan card should be in initial state (just after init cmd)
-	 * and no other operations should be performed concurrently. */
-
-	prism2_enable_aux_port(dev, 1);
-
-	for (i = 0; i < NUM_PDA_ADDRS; i++) {
-		PDEBUG(DEBUG_EXTRA2, "%s: trying to read PDA from 0x%08x",
-		       dev->name, pda_addr[i]);
-		res = hfa384x_from_aux(dev, pda_addr[i], PRISM2_PDA_SIZE, buf);
-		if (res)
-			continue;
-		if (res == 0 && prism2_pda_ok(buf)) {
-			PDEBUG2(DEBUG_EXTRA2, ": OK\n");
-			found = 1;
-			break;
-		} else {
-			PDEBUG2(DEBUG_EXTRA2, ": failed\n");
-		}
-	}
-
-	prism2_enable_aux_port(dev, 0);
-
-	if (!found) {
-		printk(KERN_DEBUG "%s: valid PDA not found\n", dev->name);
-		kfree(buf);
-		buf = NULL;
-	}
-
-	return buf;
-}
-
-
-static int prism2_download_volatile(local_info_t *local,
-				    struct prism2_download_data *param)
-{
-	struct net_device *dev = local->dev;
-	int ret = 0, i;
-	u16 param0, param1;
-
-	if (local->hw_downloading) {
-		printk(KERN_WARNING "%s: Already downloading - aborting new "
-		       "request\n", dev->name);
-		return -1;
-	}
-
-	local->hw_downloading = 1;
-	if (local->pri_only) {
-		hfa384x_disable_interrupts(dev);
-	} else {
-		prism2_hw_shutdown(dev, 0);
-
-		if (prism2_hw_init(dev, 0)) {
-			printk(KERN_WARNING "%s: Could not initialize card for"
-			       " download\n", dev->name);
-			ret = -1;
-			goto out;
-		}
-	}
-
-	if (prism2_enable_aux_port(dev, 1)) {
-		printk(KERN_WARNING "%s: Could not enable AUX port\n",
-		       dev->name);
-		ret = -1;
-		goto out;
-	}
-
-	param0 = param->start_addr & 0xffff;
-	param1 = param->start_addr >> 16;
-
-	HFA384X_OUTW(0, HFA384X_PARAM2_OFF);
-	HFA384X_OUTW(param1, HFA384X_PARAM1_OFF);
-	if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD |
-			     (HFA384X_PROGMODE_ENABLE_VOLATILE << 8),
-			     param0)) {
-		printk(KERN_WARNING "%s: Download command execution failed\n",
-		       dev->name);
-		ret = -1;
-		goto out;
-	}
-
-	for (i = 0; i < param->num_areas; i++) {
-		PDEBUG(DEBUG_EXTRA2, "%s: Writing %d bytes at 0x%08x\n",
-		       dev->name, param->data[i].len, param->data[i].addr);
-		if (hfa384x_to_aux(dev, param->data[i].addr,
-				   param->data[i].len, param->data[i].data)) {
-			printk(KERN_WARNING "%s: RAM download at 0x%08x "
-			       "(len=%d) failed\n", dev->name,
-			       param->data[i].addr, param->data[i].len);
-			ret = -1;
-			goto out;
-		}
-	}
-
-	HFA384X_OUTW(param1, HFA384X_PARAM1_OFF);
-	HFA384X_OUTW(0, HFA384X_PARAM2_OFF);
-	if (hfa384x_cmd_no_wait(dev, HFA384X_CMDCODE_DOWNLOAD |
-				(HFA384X_PROGMODE_DISABLE << 8), param0)) {
-		printk(KERN_WARNING "%s: Download command execution failed\n",
-		       dev->name);
-		ret = -1;
-		goto out;
-	}
-	/* ProgMode disable causes the hardware to restart itself from the
-	 * given starting address. Give hw some time and ACK command just in
-	 * case restart did not happen. */
-	mdelay(5);
-	HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF);
-
-	if (prism2_enable_aux_port(dev, 0)) {
-		printk(KERN_DEBUG "%s: Disabling AUX port failed\n",
-		       dev->name);
-		/* continue anyway.. restart should have taken care of this */
-	}
-
-	mdelay(5);
-	local->hw_downloading = 0;
-	if (prism2_hw_config(dev, 2)) {
-		printk(KERN_WARNING "%s: Card configuration after RAM "
-		       "download failed\n", dev->name);
-		ret = -1;
-		goto out;
-	}
-
- out:
-	local->hw_downloading = 0;
-	return ret;
-}
-
-
-static int prism2_enable_genesis(local_info_t *local, int hcr)
-{
-	struct net_device *dev = local->dev;
-	u8 initseq[4] = { 0x00, 0xe1, 0xa1, 0xff };
-	u8 readbuf[4];
-
-	printk(KERN_DEBUG "%s: test Genesis mode with HCR 0x%02x\n",
-	       dev->name, hcr);
-	local->func->cor_sreset(local);
-	hfa384x_to_aux(dev, 0x7e0038, sizeof(initseq), initseq);
-	local->func->genesis_reset(local, hcr);
-
-	/* Readback test */
-	hfa384x_from_aux(dev, 0x7e0038, sizeof(readbuf), readbuf);
-	hfa384x_to_aux(dev, 0x7e0038, sizeof(initseq), initseq);
-	hfa384x_from_aux(dev, 0x7e0038, sizeof(readbuf), readbuf);
-
-	if (memcmp(initseq, readbuf, sizeof(initseq)) == 0) {
-		printk(KERN_DEBUG "Readback test succeeded, HCR 0x%02x\n",
-		       hcr);
-		return 0;
-	} else {
-		printk(KERN_DEBUG "Readback test failed, HCR 0x%02x write %4ph read %4ph\n",
-		       hcr, initseq, readbuf);
-		return 1;
-	}
-}
-
-
-static int prism2_get_ram_size(local_info_t *local)
-{
-	int ret;
-
-	/* Try to enable genesis mode; 0x1F for x8 SRAM or 0x0F for x16 SRAM */
-	if (prism2_enable_genesis(local, 0x1f) == 0)
-		ret = 8;
-	else if (prism2_enable_genesis(local, 0x0f) == 0)
-		ret = 16;
-	else
-		ret = -1;
-
-	/* Disable genesis mode */
-	local->func->genesis_reset(local, ret == 16 ? 0x07 : 0x17);
-
-	return ret;
-}
-
-
-static int prism2_download_genesis(local_info_t *local,
-				   struct prism2_download_data *param)
-{
-	struct net_device *dev = local->dev;
-	int ram16 = 0, i;
-	int ret = 0;
-
-	if (local->hw_downloading) {
-		printk(KERN_WARNING "%s: Already downloading - aborting new "
-		       "request\n", dev->name);
-		return -EBUSY;
-	}
-
-	if (!local->func->genesis_reset || !local->func->cor_sreset) {
-		printk(KERN_INFO "%s: Genesis mode downloading not supported "
-		       "with this hwmodel\n", dev->name);
-		return -EOPNOTSUPP;
-	}
-
-	local->hw_downloading = 1;
-
-	if (prism2_enable_aux_port(dev, 1)) {
-		printk(KERN_DEBUG "%s: failed to enable AUX port\n",
-		       dev->name);
-		ret = -EIO;
-		goto out;
-	}
-
-	if (local->sram_type == -1) {
-		/* 0x1F for x8 SRAM or 0x0F for x16 SRAM */
-		if (prism2_enable_genesis(local, 0x1f) == 0) {
-			ram16 = 0;
-			PDEBUG(DEBUG_EXTRA2, "%s: Genesis mode OK using x8 "
-			       "SRAM\n", dev->name);
-		} else if (prism2_enable_genesis(local, 0x0f) == 0) {
-			ram16 = 1;
-			PDEBUG(DEBUG_EXTRA2, "%s: Genesis mode OK using x16 "
-			       "SRAM\n", dev->name);
-		} else {
-			printk(KERN_DEBUG "%s: Could not initiate genesis "
-			       "mode\n", dev->name);
-			ret = -EIO;
-			goto out;
-		}
-	} else {
-		if (prism2_enable_genesis(local, local->sram_type == 8 ?
-					  0x1f : 0x0f)) {
-			printk(KERN_DEBUG "%s: Failed to set Genesis "
-			       "mode (sram_type=%d)\n", dev->name,
-			       local->sram_type);
-			ret = -EIO;
-			goto out;
-		}
-		ram16 = local->sram_type != 8;
-	}
-
-	for (i = 0; i < param->num_areas; i++) {
-		PDEBUG(DEBUG_EXTRA2, "%s: Writing %d bytes at 0x%08x\n",
-		       dev->name, param->data[i].len, param->data[i].addr);
-		if (hfa384x_to_aux(dev, param->data[i].addr,
-				   param->data[i].len, param->data[i].data)) {
-			printk(KERN_WARNING "%s: RAM download at 0x%08x "
-			       "(len=%d) failed\n", dev->name,
-			       param->data[i].addr, param->data[i].len);
-			ret = -EIO;
-			goto out;
-		}
-	}
-
-	PDEBUG(DEBUG_EXTRA2, "Disable genesis mode\n");
-	local->func->genesis_reset(local, ram16 ? 0x07 : 0x17);
-	if (prism2_enable_aux_port(dev, 0)) {
-		printk(KERN_DEBUG "%s: Failed to disable AUX port\n",
-		       dev->name);
-	}
-
-	mdelay(5);
-	local->hw_downloading = 0;
-
-	PDEBUG(DEBUG_EXTRA2, "Trying to initialize card\n");
-	/*
-	 * Make sure the INIT command does not generate a command completion
-	 * event by disabling interrupts.
-	 */
-	hfa384x_disable_interrupts(dev);
-	if (prism2_hw_init(dev, 1)) {
-		printk(KERN_DEBUG "%s: Initialization after genesis mode "
-		       "download failed\n", dev->name);
-		ret = -EIO;
-		goto out;
-	}
-
-	PDEBUG(DEBUG_EXTRA2, "Card initialized - running PRI only\n");
-	if (prism2_hw_init2(dev, 1)) {
-		printk(KERN_DEBUG "%s: Initialization(2) after genesis mode "
-		       "download failed\n", dev->name);
-		ret = -EIO;
-		goto out;
-	}
-
- out:
-	local->hw_downloading = 0;
-	return ret;
-}
-
-
-#ifdef PRISM2_NON_VOLATILE_DOWNLOAD
-/* Note! Non-volatile downloading functionality has not yet been tested
- * thoroughly and it may corrupt flash image and effectively kill the card that
- * is being updated. You have been warned. */
-
-static inline int prism2_download_block(struct net_device *dev,
-					u32 addr, u8 *data,
-					u32 bufaddr, int rest_len)
-{
-	u16 param0, param1;
-	int block_len;
-
-	block_len = rest_len < 4096 ? rest_len : 4096;
-
-	param0 = addr & 0xffff;
-	param1 = addr >> 16;
-
-	HFA384X_OUTW(block_len, HFA384X_PARAM2_OFF);
-	HFA384X_OUTW(param1, HFA384X_PARAM1_OFF);
-
-	if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD |
-			     (HFA384X_PROGMODE_ENABLE_NON_VOLATILE << 8),
-			     param0)) {
-		printk(KERN_WARNING "%s: Flash download command execution "
-		       "failed\n", dev->name);
-		return -1;
-	}
-
-	if (hfa384x_to_aux(dev, bufaddr, block_len, data)) {
-		printk(KERN_WARNING "%s: flash download at 0x%08x "
-		       "(len=%d) failed\n", dev->name, addr, block_len);
-		return -1;
-	}
-
-	HFA384X_OUTW(0, HFA384X_PARAM2_OFF);
-	HFA384X_OUTW(0, HFA384X_PARAM1_OFF);
-	if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD |
-			     (HFA384X_PROGMODE_PROGRAM_NON_VOLATILE << 8),
-			     0)) {
-		printk(KERN_WARNING "%s: Flash write command execution "
-		       "failed\n", dev->name);
-		return -1;
-	}
-
-	return block_len;
-}
-
-
-static int prism2_download_nonvolatile(local_info_t *local,
-				       struct prism2_download_data *dl)
-{
-	struct net_device *dev = local->dev;
-	int ret = 0, i;
-	struct {
-		__le16 page;
-		__le16 offset;
-		__le16 len;
-	} dlbuffer;
-	u32 bufaddr;
-
-	if (local->hw_downloading) {
-		printk(KERN_WARNING "%s: Already downloading - aborting new "
-		       "request\n", dev->name);
-		return -1;
-	}
-
-	ret = local->func->get_rid(dev, HFA384X_RID_DOWNLOADBUFFER,
-				   &dlbuffer, 6, 0);
-
-	if (ret < 0) {
-		printk(KERN_WARNING "%s: Could not read download buffer "
-		       "parameters\n", dev->name);
-		goto out;
-	}
-
-	printk(KERN_DEBUG "Download buffer: %d bytes at 0x%04x:0x%04x\n",
-	       le16_to_cpu(dlbuffer.len),
-	       le16_to_cpu(dlbuffer.page),
-	       le16_to_cpu(dlbuffer.offset));
-
-	bufaddr = (le16_to_cpu(dlbuffer.page) << 7) + le16_to_cpu(dlbuffer.offset);
-
-	local->hw_downloading = 1;
-
-	if (!local->pri_only) {
-		prism2_hw_shutdown(dev, 0);
-
-		if (prism2_hw_init(dev, 0)) {
-			printk(KERN_WARNING "%s: Could not initialize card for"
-			       " download\n", dev->name);
-			ret = -1;
-			goto out;
-		}
-	}
-
-	hfa384x_disable_interrupts(dev);
-
-	if (prism2_enable_aux_port(dev, 1)) {
-		printk(KERN_WARNING "%s: Could not enable AUX port\n",
-		       dev->name);
-		ret = -1;
-		goto out;
-	}
-
-	printk(KERN_DEBUG "%s: starting flash download\n", dev->name);
-	for (i = 0; i < dl->num_areas; i++) {
-		int rest_len = dl->data[i].len;
-		int data_off = 0;
-
-		while (rest_len > 0) {
-			int block_len;
-
-			block_len = prism2_download_block(
-				dev, dl->data[i].addr + data_off,
-				dl->data[i].data + data_off, bufaddr,
-				rest_len);
-
-			if (block_len < 0) {
-				ret = -1;
-				goto out;
-			}
-
-			rest_len -= block_len;
-			data_off += block_len;
-		}
-	}
-
-	HFA384X_OUTW(0, HFA384X_PARAM1_OFF);
-	HFA384X_OUTW(0, HFA384X_PARAM2_OFF);
-	if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD |
-				(HFA384X_PROGMODE_DISABLE << 8), 0)) {
-		printk(KERN_WARNING "%s: Download command execution failed\n",
-		       dev->name);
-		ret = -1;
-		goto out;
-	}
-
-	if (prism2_enable_aux_port(dev, 0)) {
-		printk(KERN_DEBUG "%s: Disabling AUX port failed\n",
-		       dev->name);
-		/* continue anyway.. restart should have taken care of this */
-	}
-
-	mdelay(5);
-
-	local->func->hw_reset(dev);
-	local->hw_downloading = 0;
-	if (prism2_hw_config(dev, 2)) {
-		printk(KERN_WARNING "%s: Card configuration after flash "
-		       "download failed\n", dev->name);
-		ret = -1;
-	} else {
-		printk(KERN_INFO "%s: Card initialized successfully after "
-		       "flash download\n", dev->name);
-	}
-
- out:
-	local->hw_downloading = 0;
-	return ret;
-}
-#endif /* PRISM2_NON_VOLATILE_DOWNLOAD */
-
-
-static void prism2_download_free_data(struct prism2_download_data *dl)
-{
-	int i;
-
-	if (dl == NULL)
-		return;
-
-	for (i = 0; i < dl->num_areas; i++)
-		kfree(dl->data[i].data);
-	kfree(dl);
-}
-
-
-static int prism2_download(local_info_t *local,
-			   struct prism2_download_param *param)
-{
-	int ret = 0;
-	int i;
-	u32 total_len = 0;
-	struct prism2_download_data *dl = NULL;
-
-	printk(KERN_DEBUG "prism2_download: dl_cmd=%d start_addr=0x%08x "
-	       "num_areas=%d\n",
-	       param->dl_cmd, param->start_addr, param->num_areas);
-
-	if (param->num_areas > 100) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	dl = kzalloc(struct_size(dl, data, param->num_areas), GFP_KERNEL);
-	if (dl == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	dl->dl_cmd = param->dl_cmd;
-	dl->start_addr = param->start_addr;
-	dl->num_areas = param->num_areas;
-	for (i = 0; i < param->num_areas; i++) {
-		PDEBUG(DEBUG_EXTRA2,
-		       "  area %d: addr=0x%08x len=%d ptr=0x%p\n",
-		       i, param->data[i].addr, param->data[i].len,
-		       param->data[i].ptr);
-
-		dl->data[i].addr = param->data[i].addr;
-		dl->data[i].len = param->data[i].len;
-
-		total_len += param->data[i].len;
-		if (param->data[i].len > PRISM2_MAX_DOWNLOAD_AREA_LEN ||
-		    total_len > PRISM2_MAX_DOWNLOAD_LEN) {
-			ret = -E2BIG;
-			goto out;
-		}
-
-		dl->data[i].data = kmalloc(dl->data[i].len, GFP_KERNEL);
-		if (dl->data[i].data == NULL) {
-			ret = -ENOMEM;
-			goto out;
-		}
-
-		if (copy_from_user(dl->data[i].data, param->data[i].ptr,
-				   param->data[i].len)) {
-			ret = -EFAULT;
-			goto out;
-		}
-	}
-
-	switch (param->dl_cmd) {
-	case PRISM2_DOWNLOAD_VOLATILE:
-	case PRISM2_DOWNLOAD_VOLATILE_PERSISTENT:
-		ret = prism2_download_volatile(local, dl);
-		break;
-	case PRISM2_DOWNLOAD_VOLATILE_GENESIS:
-	case PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT:
-		ret = prism2_download_genesis(local, dl);
-		break;
-	case PRISM2_DOWNLOAD_NON_VOLATILE:
-#ifdef PRISM2_NON_VOLATILE_DOWNLOAD
-		ret = prism2_download_nonvolatile(local, dl);
-#else /* PRISM2_NON_VOLATILE_DOWNLOAD */
-		printk(KERN_INFO "%s: non-volatile downloading not enabled\n",
-		       local->dev->name);
-		ret = -EOPNOTSUPP;
-#endif /* PRISM2_NON_VOLATILE_DOWNLOAD */
-		break;
-	default:
-		printk(KERN_DEBUG "%s: unsupported download command %d\n",
-		       local->dev->name, param->dl_cmd);
-		ret = -EINVAL;
-		break;
-	}
-
- out:
-	if (ret == 0 && dl &&
-	    param->dl_cmd == PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT) {
-		prism2_download_free_data(local->dl_pri);
-		local->dl_pri = dl;
-	} else if (ret == 0 && dl &&
-		   param->dl_cmd == PRISM2_DOWNLOAD_VOLATILE_PERSISTENT) {
-		prism2_download_free_data(local->dl_sec);
-		local->dl_sec = dl;
-	} else
-		prism2_download_free_data(dl);
-
-	return ret;
-}
diff --git a/drivers/net/wireless/intersil/hostap/hostap_hw.c b/drivers/net/wireless/intersil/hostap/hostap_hw.c
deleted file mode 100644
index b74f4cb5d6..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_hw.c
+++ /dev/null
@@ -1,3387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Host AP (software wireless LAN access point) driver for
- * Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <j@w1.fi>
- * Copyright (c) 2002-2005, Jouni Malinen <j@w1.fi>
- *
- * FIX:
- * - there is currently no way of associating TX packets to correct wds device
- *   when TX Exc/OK event occurs, so all tx_packets and some
- *   tx_errors/tx_dropped are added to the main netdevice; using sw_support
- *   field in txdesc might be used to fix this (using Alloc event to increment
- *   tx_packets would need some further info in txfid table)
- *
- * Buffer Access Path (BAP) usage:
- *   Prism2 cards have two separate BAPs for accessing the card memory. These
- *   should allow concurrent access to two different frames and the driver
- *   previously used BAP0 for sending data and BAP1 for receiving data.
- *   However, there seems to be number of issues with concurrent access and at
- *   least one know hardware bug in using BAP0 and BAP1 concurrently with PCI
- *   Prism2.5. Therefore, the driver now only uses BAP0 for moving data between
- *   host and card memories. BAP0 accesses are protected with local->baplock
- *   (spin_lock_bh) to prevent concurrent use.
- */
-
-
-
-#include <asm/delay.h>
-#include <linux/uaccess.h>
-
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/if_arp.h>
-#include <linux/delay.h>
-#include <linux/random.h>
-#include <linux/wait.h>
-#include <linux/sched/signal.h>
-#include <linux/rtnetlink.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <net/lib80211.h>
-#include <asm/irq.h>
-
-#include "hostap_80211.h"
-#include "hostap.h"
-#include "hostap_ap.h"
-
-
-/* #define final_version */
-
-static int mtu = 1500;
-module_param(mtu, int, 0444);
-MODULE_PARM_DESC(mtu, "Maximum transfer unit");
-
-static int channel[MAX_PARM_DEVICES] = { 3, DEF_INTS };
-module_param_array(channel, int, NULL, 0444);
-MODULE_PARM_DESC(channel, "Initial channel");
-
-static char essid[33] = "test";
-module_param_string(essid, essid, sizeof(essid), 0444);
-MODULE_PARM_DESC(essid, "Host AP's ESSID");
-
-static int iw_mode[MAX_PARM_DEVICES] = { IW_MODE_MASTER, DEF_INTS };
-module_param_array(iw_mode, int, NULL, 0444);
-MODULE_PARM_DESC(iw_mode, "Initial operation mode");
-
-static int beacon_int[MAX_PARM_DEVICES] = { 100, DEF_INTS };
-module_param_array(beacon_int, int, NULL, 0444);
-MODULE_PARM_DESC(beacon_int, "Beacon interval (1 = 1024 usec)");
-
-static int dtim_period[MAX_PARM_DEVICES] = { 1, DEF_INTS };
-module_param_array(dtim_period, int, NULL, 0444);
-MODULE_PARM_DESC(dtim_period, "DTIM period");
-
-static char dev_template[16] = "wlan%d";
-module_param_string(dev_template, dev_template, sizeof(dev_template), 0444);
-MODULE_PARM_DESC(dev_template, "Prefix for network device name (default: "
-		 "wlan%d)");
-
-#ifdef final_version
-#define EXTRA_EVENTS_WTERR 0
-#else
-/* check WTERR events (Wait Time-out) in development versions */
-#define EXTRA_EVENTS_WTERR HFA384X_EV_WTERR
-#endif
-
-/* Events that will be using BAP0 */
-#define HFA384X_BAP0_EVENTS \
-	(HFA384X_EV_TXEXC | HFA384X_EV_RX | HFA384X_EV_INFO | HFA384X_EV_TX)
-
-/* event mask, i.e., events that will result in an interrupt */
-#define HFA384X_EVENT_MASK \
-	(HFA384X_BAP0_EVENTS | HFA384X_EV_ALLOC | HFA384X_EV_INFDROP | \
-	HFA384X_EV_CMD | HFA384X_EV_TICK | \
-	EXTRA_EVENTS_WTERR)
-
-/* Default TX control flags: use 802.11 headers and request interrupt for
- * failed transmits. Frames that request ACK callback, will add
- * _TX_OK flag and _ALT_RTRY flag may be used to select different retry policy.
- */
-#define HFA384X_TX_CTRL_FLAGS \
-	(HFA384X_TX_CTRL_802_11 | HFA384X_TX_CTRL_TX_EX)
-
-
-/* ca. 1 usec */
-#define HFA384X_CMD_BUSY_TIMEOUT 5000
-#define HFA384X_BAP_BUSY_TIMEOUT 50000
-
-/* ca. 10 usec */
-#define HFA384X_CMD_COMPL_TIMEOUT 20000
-#define HFA384X_DL_COMPL_TIMEOUT 1000000
-
-/* Wait times for initialization; yield to other processes to avoid busy
- * waiting for long time. */
-#define HFA384X_INIT_TIMEOUT (HZ / 2) /* 500 ms */
-#define HFA384X_ALLOC_COMPL_TIMEOUT (HZ / 20) /* 50 ms */
-
-
-static void prism2_hw_reset(struct net_device *dev);
-static void prism2_check_sta_fw_version(local_info_t *local);
-
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-/* hostap_download.c */
-static const struct proc_ops prism2_download_aux_dump_proc_ops;
-static u8 * prism2_read_pda(struct net_device *dev);
-static int prism2_download(local_info_t *local,
-			   struct prism2_download_param *param);
-static void prism2_download_free_data(struct prism2_download_data *dl);
-static int prism2_download_volatile(local_info_t *local,
-				    struct prism2_download_data *param);
-static int prism2_download_genesis(local_info_t *local,
-				   struct prism2_download_data *param);
-static int prism2_get_ram_size(local_info_t *local);
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-
-
-
-
-#ifndef final_version
-/* magic value written to SWSUPPORT0 reg. for detecting whether card is still
- * present */
-#define HFA384X_MAGIC 0x8A32
-#endif
-
-static void hfa384x_read_regs(struct net_device *dev,
-			      struct hfa384x_regs *regs)
-{
-	regs->cmd = HFA384X_INW(HFA384X_CMD_OFF);
-	regs->evstat = HFA384X_INW(HFA384X_EVSTAT_OFF);
-	regs->offset0 = HFA384X_INW(HFA384X_OFFSET0_OFF);
-	regs->offset1 = HFA384X_INW(HFA384X_OFFSET1_OFF);
-	regs->swsupport0 = HFA384X_INW(HFA384X_SWSUPPORT0_OFF);
-}
-
-
-/**
- * __hostap_cmd_queue_free - Free Prism2 command queue entry (private)
- * @local: pointer to private Host AP driver data
- * @entry: Prism2 command queue entry to be freed
- * @del_req: request the entry to be removed
- *
- * Internal helper function for freeing Prism2 command queue entries.
- * Caller must have acquired local->cmdlock before calling this function.
- */
-static inline void __hostap_cmd_queue_free(local_info_t *local,
-					   struct hostap_cmd_queue *entry,
-					   int del_req)
-{
-	if (del_req) {
-		entry->del_req = 1;
-		if (!list_empty(&entry->list)) {
-			list_del_init(&entry->list);
-			local->cmd_queue_len--;
-		}
-	}
-
-	if (refcount_dec_and_test(&entry->usecnt) && entry->del_req)
-		kfree(entry);
-}
-
-
-/**
- * hostap_cmd_queue_free - Free Prism2 command queue entry
- * @local: pointer to private Host AP driver data
- * @entry: Prism2 command queue entry to be freed
- * @del_req: request the entry to be removed
- *
- * Free a Prism2 command queue entry.
- */
-static inline void hostap_cmd_queue_free(local_info_t *local,
-					 struct hostap_cmd_queue *entry,
-					 int del_req)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&local->cmdlock, flags);
-	__hostap_cmd_queue_free(local, entry, del_req);
-	spin_unlock_irqrestore(&local->cmdlock, flags);
-}
-
-
-/**
- * prism2_clear_cmd_queue - Free all pending Prism2 command queue entries
- * @local: pointer to private Host AP driver data
- */
-static void prism2_clear_cmd_queue(local_info_t *local)
-{
-	struct list_head *ptr, *n;
-	unsigned long flags;
-	struct hostap_cmd_queue *entry;
-
-	spin_lock_irqsave(&local->cmdlock, flags);
-	list_for_each_safe(ptr, n, &local->cmd_queue) {
-		entry = list_entry(ptr, struct hostap_cmd_queue, list);
-		refcount_inc(&entry->usecnt);
-		printk(KERN_DEBUG "%s: removed pending cmd_queue entry "
-		       "(type=%d, cmd=0x%04x, param0=0x%04x)\n",
-		       local->dev->name, entry->type, entry->cmd,
-		       entry->param0);
-		__hostap_cmd_queue_free(local, entry, 1);
-	}
-	if (local->cmd_queue_len) {
-		/* This should not happen; print debug message and clear
-		 * queue length. */
-		printk(KERN_DEBUG "%s: cmd_queue_len (%d) not zero after "
-		       "flush\n", local->dev->name, local->cmd_queue_len);
-		local->cmd_queue_len = 0;
-	}
-	spin_unlock_irqrestore(&local->cmdlock, flags);
-}
-
-
-/**
- * hfa384x_cmd_issue - Issue a Prism2 command to the hardware
- * @dev: pointer to net_device
- * @entry: Prism2 command queue entry to be issued
- */
-static int hfa384x_cmd_issue(struct net_device *dev,
-				    struct hostap_cmd_queue *entry)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int tries;
-	u16 reg;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->func->card_present && !local->func->card_present(local))
-		return -ENODEV;
-
-	if (entry->issued) {
-		printk(KERN_DEBUG "%s: driver bug - re-issuing command @%p\n",
-		       dev->name, entry);
-	}
-
-	/* wait until busy bit is clear; this should always be clear since the
-	 * commands are serialized */
-	tries = HFA384X_CMD_BUSY_TIMEOUT;
-	while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) {
-		tries--;
-		udelay(1);
-	}
-#ifndef final_version
-	if (tries != HFA384X_CMD_BUSY_TIMEOUT) {
-		prism2_io_debug_error(dev, 1);
-		printk(KERN_DEBUG "%s: hfa384x_cmd_issue: cmd reg was busy "
-		       "for %d usec\n", dev->name,
-		       HFA384X_CMD_BUSY_TIMEOUT - tries);
-	}
-#endif
-	if (tries == 0) {
-		reg = HFA384X_INW(HFA384X_CMD_OFF);
-		prism2_io_debug_error(dev, 2);
-		printk(KERN_DEBUG "%s: hfa384x_cmd_issue - timeout - "
-		       "reg=0x%04x\n", dev->name, reg);
-		return -ETIMEDOUT;
-	}
-
-	/* write command */
-	spin_lock_irqsave(&local->cmdlock, flags);
-	HFA384X_OUTW(entry->param0, HFA384X_PARAM0_OFF);
-	HFA384X_OUTW(entry->param1, HFA384X_PARAM1_OFF);
-	HFA384X_OUTW(entry->cmd, HFA384X_CMD_OFF);
-	entry->issued = 1;
-	spin_unlock_irqrestore(&local->cmdlock, flags);
-
-	return 0;
-}
-
-
-/**
- * hfa384x_cmd - Issue a Prism2 command and wait (sleep) for completion
- * @dev: pointer to net_device
- * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
- * @param0: value for Param0 register
- * @param1: value for Param1 register (pointer; %NULL if not used)
- * @resp0: pointer for Resp0 data or %NULL if Resp0 is not needed
- *
- * Issue given command (possibly after waiting in command queue) and sleep
- * until the command is completed (or timed out or interrupted). This can be
- * called only from user process context.
- */
-static int hfa384x_cmd(struct net_device *dev, u16 cmd, u16 param0,
-		       u16 *param1, u16 *resp0)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int err, res, issue, issued = 0;
-	unsigned long flags;
-	struct hostap_cmd_queue *entry;
-	DECLARE_WAITQUEUE(wait, current);
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN) {
-		printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n",
-		       dev->name);
-		return -1;
-	}
-
-	if (signal_pending(current))
-		return -EINTR;
-
-	entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
-	if (entry == NULL)
-		return -ENOMEM;
-
-	refcount_set(&entry->usecnt, 1);
-	entry->type = CMD_SLEEP;
-	entry->cmd = cmd;
-	entry->param0 = param0;
-	if (param1)
-		entry->param1 = *param1;
-	init_waitqueue_head(&entry->compl);
-
-	/* prepare to wait for command completion event, but do not sleep yet
-	 */
-	add_wait_queue(&entry->compl, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-
-	spin_lock_irqsave(&local->cmdlock, flags);
-	issue = list_empty(&local->cmd_queue);
-	if (issue)
-		entry->issuing = 1;
-	list_add_tail(&entry->list, &local->cmd_queue);
-	local->cmd_queue_len++;
-	spin_unlock_irqrestore(&local->cmdlock, flags);
-
-	err = 0;
-	if (!issue)
-		goto wait_completion;
-
-	if (signal_pending(current))
-		err = -EINTR;
-
-	if (!err) {
-		if (hfa384x_cmd_issue(dev, entry))
-			err = -ETIMEDOUT;
-		else
-			issued = 1;
-	}
-
- wait_completion:
-	if (!err && entry->type != CMD_COMPLETED) {
-		/* sleep until command is completed or timed out */
-		res = schedule_timeout(2 * HZ);
-	} else
-		res = -1;
-
-	if (!err && signal_pending(current))
-		err = -EINTR;
-
-	if (err && issued) {
-		/* the command was issued, so a CmdCompl event should occur
-		 * soon; however, there's a pending signal and
-		 * schedule_timeout() would be interrupted; wait a short period
-		 * of time to avoid removing entry from the list before
-		 * CmdCompl event */
-		udelay(300);
-	}
-
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&entry->compl, &wait);
-
-	/* If entry->list is still in the list, it must be removed
-	 * first and in this case prism2_cmd_ev() does not yet have
-	 * local reference to it, and the data can be kfree()'d
-	 * here. If the command completion event is still generated,
-	 * it will be assigned to next (possibly) pending command, but
-	 * the driver will reset the card anyway due to timeout
-	 *
-	 * If the entry is not in the list prism2_cmd_ev() has a local
-	 * reference to it, but keeps cmdlock as long as the data is
-	 * needed, so the data can be kfree()'d here. */
-
-	/* FIX: if the entry->list is in the list, it has not been completed
-	 * yet, so removing it here is somewhat wrong.. this could cause
-	 * references to freed memory and next list_del() causing NULL pointer
-	 * dereference.. it would probably be better to leave the entry in the
-	 * list and the list should be emptied during hw reset */
-
-	spin_lock_irqsave(&local->cmdlock, flags);
-	if (!list_empty(&entry->list)) {
-		printk(KERN_DEBUG "%s: hfa384x_cmd: entry still in list? "
-		       "(entry=%p, type=%d, res=%d)\n", dev->name, entry,
-		       entry->type, res);
-		list_del_init(&entry->list);
-		local->cmd_queue_len--;
-	}
-	spin_unlock_irqrestore(&local->cmdlock, flags);
-
-	if (err) {
-		printk(KERN_DEBUG "%s: hfa384x_cmd: interrupted; err=%d\n",
-		       dev->name, err);
-		res = err;
-		goto done;
-	}
-
-	if (entry->type != CMD_COMPLETED) {
-		u16 reg = HFA384X_INW(HFA384X_EVSTAT_OFF);
-		printk(KERN_DEBUG "%s: hfa384x_cmd: command was not "
-		       "completed (res=%d, entry=%p, type=%d, cmd=0x%04x, "
-		       "param0=0x%04x, EVSTAT=%04x INTEN=%04x)\n", dev->name,
-		       res, entry, entry->type, entry->cmd, entry->param0, reg,
-		       HFA384X_INW(HFA384X_INTEN_OFF));
-		if (reg & HFA384X_EV_CMD) {
-			/* Command completion event is pending, but the
-			 * interrupt was not delivered - probably an issue
-			 * with pcmcia-cs configuration. */
-			printk(KERN_WARNING "%s: interrupt delivery does not "
-			       "seem to work\n", dev->name);
-		}
-		prism2_io_debug_error(dev, 3);
-		res = -ETIMEDOUT;
-		goto done;
-	}
-
-	if (resp0 != NULL)
-		*resp0 = entry->resp0;
-#ifndef final_version
-	if (entry->res) {
-		printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x, "
-		       "resp0=0x%04x\n",
-		       dev->name, cmd, entry->res, entry->resp0);
-	}
-#endif /* final_version */
-
-	res = entry->res;
- done:
-	hostap_cmd_queue_free(local, entry, 1);
-	return res;
-}
-
-
-/**
- * hfa384x_cmd_callback - Issue a Prism2 command; callback when completed
- * @dev: pointer to net_device
- * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
- * @param0: value for Param0 register
- * @callback: command completion callback function (%NULL = no callback)
- * @context: context data to be given to the callback function
- *
- * Issue given command (possibly after waiting in command queue) and use
- * callback function to indicate command completion. This can be called both
- * from user and interrupt context. The callback function will be called in
- * hardware IRQ context. It can be %NULL, when no function is called when
- * command is completed.
- */
-static int hfa384x_cmd_callback(struct net_device *dev, u16 cmd, u16 param0,
-				void (*callback)(struct net_device *dev,
-						 long context, u16 resp0,
-						 u16 status),
-				long context)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int issue, ret;
-	unsigned long flags;
-	struct hostap_cmd_queue *entry;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN + 2) {
-		printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n",
-		       dev->name);
-		return -1;
-	}
-
-	entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
-	if (entry == NULL)
-		return -ENOMEM;
-
-	refcount_set(&entry->usecnt, 1);
-	entry->type = CMD_CALLBACK;
-	entry->cmd = cmd;
-	entry->param0 = param0;
-	entry->callback = callback;
-	entry->context = context;
-
-	spin_lock_irqsave(&local->cmdlock, flags);
-	issue = list_empty(&local->cmd_queue);
-	if (issue)
-		entry->issuing = 1;
-	list_add_tail(&entry->list, &local->cmd_queue);
-	local->cmd_queue_len++;
-	spin_unlock_irqrestore(&local->cmdlock, flags);
-
-	if (issue && hfa384x_cmd_issue(dev, entry))
-		ret = -ETIMEDOUT;
-	else
-		ret = 0;
-
-	hostap_cmd_queue_free(local, entry, ret);
-
-	return ret;
-}
-
-
-/**
- * __hfa384x_cmd_no_wait - Issue a Prism2 command (private)
- * @dev: pointer to net_device
- * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
- * @param0: value for Param0 register
- * @io_debug_num: I/O debug error number
- *
- * Shared helper function for hfa384x_cmd_wait() and hfa384x_cmd_no_wait().
- */
-static int __hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd, u16 param0,
-				 int io_debug_num)
-{
-	int tries;
-	u16 reg;
-
-	/* wait until busy bit is clear; this should always be clear since the
-	 * commands are serialized */
-	tries = HFA384X_CMD_BUSY_TIMEOUT;
-	while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) {
-		tries--;
-		udelay(1);
-	}
-	if (tries == 0) {
-		reg = HFA384X_INW(HFA384X_CMD_OFF);
-		prism2_io_debug_error(dev, io_debug_num);
-		printk(KERN_DEBUG "%s: __hfa384x_cmd_no_wait(%d) - timeout - "
-		       "reg=0x%04x\n", dev->name, io_debug_num, reg);
-		return -ETIMEDOUT;
-	}
-
-	/* write command */
-	HFA384X_OUTW(param0, HFA384X_PARAM0_OFF);
-	HFA384X_OUTW(cmd, HFA384X_CMD_OFF);
-
-	return 0;
-}
-
-
-/**
- * hfa384x_cmd_wait - Issue a Prism2 command and busy wait for completion
- * @dev: pointer to net_device
- * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
- * @param0: value for Param0 register
- */
-static int hfa384x_cmd_wait(struct net_device *dev, u16 cmd, u16 param0)
-{
-	int res, tries;
-	u16 reg;
-
-	res = __hfa384x_cmd_no_wait(dev, cmd, param0, 4);
-	if (res)
-		return res;
-
-        /* wait for command completion */
-	if ((cmd & HFA384X_CMDCODE_MASK) == HFA384X_CMDCODE_DOWNLOAD)
-		tries = HFA384X_DL_COMPL_TIMEOUT;
-	else
-		tries = HFA384X_CMD_COMPL_TIMEOUT;
-
-        while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) &&
-               tries > 0) {
-                tries--;
-                udelay(10);
-        }
-        if (tries == 0) {
-                reg = HFA384X_INW(HFA384X_EVSTAT_OFF);
-		prism2_io_debug_error(dev, 5);
-                printk(KERN_DEBUG "%s: hfa384x_cmd_wait - timeout2 - "
-		       "reg=0x%04x\n", dev->name, reg);
-                return -ETIMEDOUT;
-        }
-
-        res = (HFA384X_INW(HFA384X_STATUS_OFF) &
-               (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | BIT(9) |
-                BIT(8))) >> 8;
-#ifndef final_version
-	if (res) {
-		printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x\n",
-		       dev->name, cmd, res);
-	}
-#endif
-
-	HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF);
-
-	return res;
-}
-
-
-/**
- * hfa384x_cmd_no_wait - Issue a Prism2 command; do not wait for completion
- * @dev: pointer to net_device
- * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
- * @param0: value for Param0 register
- */
-static inline int hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd,
-				      u16 param0)
-{
-	return __hfa384x_cmd_no_wait(dev, cmd, param0, 6);
-}
-
-
-/**
- * prism2_cmd_ev - Prism2 command completion event handler
- * @dev: pointer to net_device
- *
- * Interrupt handler for command completion events. Called by the main
- * interrupt handler in hardware IRQ context. Read Resp0 and status registers
- * from the hardware and ACK the event. Depending on the issued command type
- * either wake up the sleeping process that is waiting for command completion
- * or call the callback function. Issue the next command, if one is pending.
- */
-static void prism2_cmd_ev(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct hostap_cmd_queue *entry = NULL;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	spin_lock(&local->cmdlock);
-	if (!list_empty(&local->cmd_queue)) {
-		entry = list_entry(local->cmd_queue.next,
-				   struct hostap_cmd_queue, list);
-		refcount_inc(&entry->usecnt);
-		list_del_init(&entry->list);
-		local->cmd_queue_len--;
-
-		if (!entry->issued) {
-			printk(KERN_DEBUG "%s: Command completion event, but "
-			       "cmd not issued\n", dev->name);
-			__hostap_cmd_queue_free(local, entry, 1);
-			entry = NULL;
-		}
-	}
-	spin_unlock(&local->cmdlock);
-
-	if (!entry) {
-		HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF);
-		printk(KERN_DEBUG "%s: Command completion event, but no "
-		       "pending commands\n", dev->name);
-		return;
-	}
-
-	entry->resp0 = HFA384X_INW(HFA384X_RESP0_OFF);
-	entry->res = (HFA384X_INW(HFA384X_STATUS_OFF) &
-		      (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) |
-		       BIT(9) | BIT(8))) >> 8;
-	HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF);
-
-	/* TODO: rest of the CmdEv handling could be moved to tasklet */
-	if (entry->type == CMD_SLEEP) {
-		entry->type = CMD_COMPLETED;
-		wake_up_interruptible(&entry->compl);
-	} else if (entry->type == CMD_CALLBACK) {
-		if (entry->callback)
-			entry->callback(dev, entry->context, entry->resp0,
-					entry->res);
-	} else {
-		printk(KERN_DEBUG "%s: Invalid command completion type %d\n",
-		       dev->name, entry->type);
-	}
-	hostap_cmd_queue_free(local, entry, 1);
-
-	/* issue next command, if pending */
-	entry = NULL;
-	spin_lock(&local->cmdlock);
-	if (!list_empty(&local->cmd_queue)) {
-		entry = list_entry(local->cmd_queue.next,
-				   struct hostap_cmd_queue, list);
-		if (entry->issuing) {
-			/* hfa384x_cmd() has already started issuing this
-			 * command, so do not start here */
-			entry = NULL;
-		}
-		if (entry)
-			refcount_inc(&entry->usecnt);
-	}
-	spin_unlock(&local->cmdlock);
-
-	if (entry) {
-		/* issue next command; if command issuing fails, remove the
-		 * entry from cmd_queue */
-		int res = hfa384x_cmd_issue(dev, entry);
-		spin_lock(&local->cmdlock);
-		__hostap_cmd_queue_free(local, entry, res);
-		spin_unlock(&local->cmdlock);
-	}
-}
-
-
-static int hfa384x_wait_offset(struct net_device *dev, u16 o_off)
-{
-	int tries = HFA384X_BAP_BUSY_TIMEOUT;
-	int res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY;
-
-	while (res && tries > 0) {
-		tries--;
-		udelay(1);
-		res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY;
-	}
-	return res;
-}
-
-
-/* Offset must be even */
-static int hfa384x_setup_bap(struct net_device *dev, u16 bap, u16 id,
-			     int offset)
-{
-	u16 o_off, s_off;
-	int ret = 0;
-
-	if (offset % 2 || bap > 1)
-		return -EINVAL;
-
-	if (bap == BAP1) {
-		o_off = HFA384X_OFFSET1_OFF;
-		s_off = HFA384X_SELECT1_OFF;
-	} else {
-		o_off = HFA384X_OFFSET0_OFF;
-		s_off = HFA384X_SELECT0_OFF;
-	}
-
-	if (hfa384x_wait_offset(dev, o_off)) {
-		prism2_io_debug_error(dev, 7);
-		printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout before\n",
-		       dev->name);
-		ret = -ETIMEDOUT;
-		goto out;
-	}
-
-	HFA384X_OUTW(id, s_off);
-	HFA384X_OUTW(offset, o_off);
-
-	if (hfa384x_wait_offset(dev, o_off)) {
-		prism2_io_debug_error(dev, 8);
-		printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout after\n",
-		       dev->name);
-		ret = -ETIMEDOUT;
-		goto out;
-	}
-#ifndef final_version
-	if (HFA384X_INW(o_off) & HFA384X_OFFSET_ERR) {
-		prism2_io_debug_error(dev, 9);
-		printk(KERN_DEBUG "%s: hfa384x_setup_bap - offset error "
-		       "(%d,0x04%x,%d); reg=0x%04x\n",
-		       dev->name, bap, id, offset, HFA384X_INW(o_off));
-		ret = -EINVAL;
-	}
-#endif
-
- out:
-	return ret;
-}
-
-
-static int hfa384x_get_rid(struct net_device *dev, u16 rid, void *buf, int len,
-			   int exact_len)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int res, rlen = 0;
-	struct hfa384x_rid_hdr rec;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->no_pri) {
-		printk(KERN_DEBUG "%s: cannot get RID %04x (len=%d) - no PRI "
-		       "f/w\n", dev->name, rid, len);
-		return -ENOTTY; /* Well.. not really correct, but return
-				 * something unique enough.. */
-	}
-
-	if ((local->func->card_present && !local->func->card_present(local)) ||
-	    local->hw_downloading)
-		return -ENODEV;
-
-	res = mutex_lock_interruptible(&local->rid_bap_mtx);
-	if (res)
-		return res;
-
-	res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS, rid, NULL, NULL);
-	if (res) {
-		printk(KERN_DEBUG "%s: hfa384x_get_rid: CMDCODE_ACCESS failed "
-		       "(res=%d, rid=%04x, len=%d)\n",
-		       dev->name, res, rid, len);
-		mutex_unlock(&local->rid_bap_mtx);
-		return res;
-	}
-
-	spin_lock_bh(&local->baplock);
-
-	res = hfa384x_setup_bap(dev, BAP0, rid, 0);
-	if (res)
-		goto unlock;
-
-	res = hfa384x_from_bap(dev, BAP0, &rec, sizeof(rec));
-	if (res)
-		goto unlock;
-
-	if (le16_to_cpu(rec.len) == 0) {
-		/* RID not available */
-		res = -ENODATA;
-		goto unlock;
-	}
-
-	rlen = (le16_to_cpu(rec.len) - 1) * 2;
-	if (exact_len && rlen != len) {
-		printk(KERN_DEBUG "%s: hfa384x_get_rid - RID len mismatch: "
-		       "rid=0x%04x, len=%d (expected %d)\n",
-		       dev->name, rid, rlen, len);
-		res = -ENODATA;
-	}
-
-	res = hfa384x_from_bap(dev, BAP0, buf, len);
-
-unlock:
-	spin_unlock_bh(&local->baplock);
-	mutex_unlock(&local->rid_bap_mtx);
-
-	if (res) {
-		if (res != -ENODATA)
-			printk(KERN_DEBUG "%s: hfa384x_get_rid (rid=%04x, "
-			       "len=%d) - failed - res=%d\n", dev->name, rid,
-			       len, res);
-		if (res == -ETIMEDOUT)
-			prism2_hw_reset(dev);
-		return res;
-	}
-
-	return rlen;
-}
-
-
-static int hfa384x_set_rid(struct net_device *dev, u16 rid, void *buf, int len)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct hfa384x_rid_hdr rec;
-	int res;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->no_pri) {
-		printk(KERN_DEBUG "%s: cannot set RID %04x (len=%d) - no PRI "
-		       "f/w\n", dev->name, rid, len);
-		return -ENOTTY; /* Well.. not really correct, but return
-				 * something unique enough.. */
-	}
-
-	if ((local->func->card_present && !local->func->card_present(local)) ||
-	    local->hw_downloading)
-		return -ENODEV;
-
-	rec.rid = cpu_to_le16(rid);
-	/* RID len in words and +1 for rec.rid */
-	rec.len = cpu_to_le16(len / 2 + len % 2 + 1);
-
-	res = mutex_lock_interruptible(&local->rid_bap_mtx);
-	if (res)
-		return res;
-
-	spin_lock_bh(&local->baplock);
-	res = hfa384x_setup_bap(dev, BAP0, rid, 0);
-	if (!res)
-		res = hfa384x_to_bap(dev, BAP0, &rec, sizeof(rec));
-	if (!res)
-		res = hfa384x_to_bap(dev, BAP0, buf, len);
-	spin_unlock_bh(&local->baplock);
-
-	if (res) {
-		printk(KERN_DEBUG "%s: hfa384x_set_rid (rid=%04x, len=%d) - "
-		       "failed - res=%d\n", dev->name, rid, len, res);
-		mutex_unlock(&local->rid_bap_mtx);
-		return res;
-	}
-
-	res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS_WRITE, rid, NULL, NULL);
-	mutex_unlock(&local->rid_bap_mtx);
-
-	if (res) {
-		printk(KERN_DEBUG "%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE "
-		       "failed (res=%d, rid=%04x, len=%d)\n",
-		       dev->name, res, rid, len);
-
-		if (res == -ETIMEDOUT)
-			prism2_hw_reset(dev);
-	}
-
-	return res;
-}
-
-
-static void hfa384x_disable_interrupts(struct net_device *dev)
-{
-	/* disable interrupts and clear event status */
-	HFA384X_OUTW(0, HFA384X_INTEN_OFF);
-	HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF);
-}
-
-
-static void hfa384x_enable_interrupts(struct net_device *dev)
-{
-	/* ack pending events and enable interrupts from selected events */
-	HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF);
-	HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF);
-}
-
-
-static void hfa384x_events_no_bap0(struct net_device *dev)
-{
-	HFA384X_OUTW(HFA384X_EVENT_MASK & ~HFA384X_BAP0_EVENTS,
-		     HFA384X_INTEN_OFF);
-}
-
-
-static void hfa384x_events_all(struct net_device *dev)
-{
-	HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF);
-}
-
-
-static void hfa384x_events_only_cmd(struct net_device *dev)
-{
-	HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_INTEN_OFF);
-}
-
-
-static u16 hfa384x_allocate_fid(struct net_device *dev, int len)
-{
-	u16 fid;
-	unsigned long delay;
-
-	/* FIX: this could be replace with hfa384x_cmd() if the Alloc event
-	 * below would be handled like CmdCompl event (sleep here, wake up from
-	 * interrupt handler */
-	if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_ALLOC, len)) {
-		printk(KERN_DEBUG "%s: cannot allocate fid, len=%d\n",
-		       dev->name, len);
-		return 0xffff;
-	}
-
-	delay = jiffies + HFA384X_ALLOC_COMPL_TIMEOUT;
-	while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC) &&
-	       time_before(jiffies, delay))
-		yield();
-	if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC)) {
-		printk("%s: fid allocate, len=%d - timeout\n", dev->name, len);
-		return 0xffff;
-	}
-
-	fid = HFA384X_INW(HFA384X_ALLOCFID_OFF);
-	HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF);
-
-	return fid;
-}
-
-
-static int prism2_reset_port(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int res;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (!local->dev_enabled)
-		return 0;
-
-	res = hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0,
-			  NULL, NULL);
-	if (res)
-		printk(KERN_DEBUG "%s: reset port failed to disable port\n",
-		       dev->name);
-	else {
-		res = hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0,
-				  NULL, NULL);
-		if (res)
-			printk(KERN_DEBUG "%s: reset port failed to enable "
-			       "port\n", dev->name);
-	}
-
-	/* It looks like at least some STA firmware versions reset
-	 * fragmentation threshold back to 2346 after enable command. Restore
-	 * the configured value, if it differs from this default. */
-	if (local->fragm_threshold != 2346 &&
-	    hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD,
-			    local->fragm_threshold)) {
-		printk(KERN_DEBUG "%s: failed to restore fragmentation "
-		       "threshold (%d) after Port0 enable\n",
-		       dev->name, local->fragm_threshold);
-	}
-
-	/* Some firmwares lose antenna selection settings on reset */
-	(void) hostap_set_antsel(local);
-
-	return res;
-}
-
-
-static int prism2_get_version_info(struct net_device *dev, u16 rid,
-				   const char *txt)
-{
-	struct hfa384x_comp_ident comp;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->no_pri) {
-		/* PRI f/w not yet available - cannot read RIDs */
-		return -1;
-	}
-	if (hfa384x_get_rid(dev, rid, &comp, sizeof(comp), 1) < 0) {
-		printk(KERN_DEBUG "Could not get RID for component %s\n", txt);
-		return -1;
-	}
-
-	printk(KERN_INFO "%s: %s: id=0x%02x v%d.%d.%d\n", dev->name, txt,
-	       __le16_to_cpu(comp.id), __le16_to_cpu(comp.major),
-	       __le16_to_cpu(comp.minor), __le16_to_cpu(comp.variant));
-	return 0;
-}
-
-
-static int prism2_setup_rids(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	__le16 tmp;
-	int ret = 0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	hostap_set_word(dev, HFA384X_RID_TICKTIME, 2000);
-
-	if (!local->fw_ap) {
-		u16 tmp1 = hostap_get_porttype(local);
-		ret = hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, tmp1);
-		if (ret) {
-			printk("%s: Port type setting to %d failed\n",
-			       dev->name, tmp1);
-			goto fail;
-		}
-	}
-
-	/* Setting SSID to empty string seems to kill the card in Host AP mode
-	 */
-	if (local->iw_mode != IW_MODE_MASTER || local->essid[0] != '\0') {
-		ret = hostap_set_string(dev, HFA384X_RID_CNFOWNSSID,
-					local->essid);
-		if (ret) {
-			printk("%s: AP own SSID setting failed\n", dev->name);
-			goto fail;
-		}
-	}
-
-	ret = hostap_set_word(dev, HFA384X_RID_CNFMAXDATALEN,
-			      PRISM2_DATA_MAXLEN);
-	if (ret) {
-		printk("%s: MAC data length setting to %d failed\n",
-		       dev->name, PRISM2_DATA_MAXLEN);
-		goto fail;
-	}
-
-	if (hfa384x_get_rid(dev, HFA384X_RID_CHANNELLIST, &tmp, 2, 1) < 0) {
-		printk("%s: Channel list read failed\n", dev->name);
-		ret = -EINVAL;
-		goto fail;
-	}
-	local->channel_mask = le16_to_cpu(tmp);
-
-	if (local->channel < 1 || local->channel > 14 ||
-	    !(local->channel_mask & (1 << (local->channel - 1)))) {
-		printk(KERN_WARNING "%s: Channel setting out of range "
-		       "(%d)!\n", dev->name, local->channel);
-		ret = -EBUSY;
-		goto fail;
-	}
-
-	ret = hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel);
-	if (ret) {
-		printk("%s: Channel setting to %d failed\n",
-		       dev->name, local->channel);
-		goto fail;
-	}
-
-	ret = hostap_set_word(dev, HFA384X_RID_CNFBEACONINT,
-			      local->beacon_int);
-	if (ret) {
-		printk("%s: Beacon interval setting to %d failed\n",
-		       dev->name, local->beacon_int);
-		/* this may fail with Symbol/Lucent firmware */
-		if (ret == -ETIMEDOUT)
-			goto fail;
-	}
-
-	ret = hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD,
-			      local->dtim_period);
-	if (ret) {
-		printk("%s: DTIM period setting to %d failed\n",
-		       dev->name, local->dtim_period);
-		/* this may fail with Symbol/Lucent firmware */
-		if (ret == -ETIMEDOUT)
-			goto fail;
-	}
-
-	ret = hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE,
-			      local->is_promisc);
-	if (ret)
-		printk(KERN_INFO "%s: Setting promiscuous mode (%d) failed\n",
-		       dev->name, local->is_promisc);
-
-	if (!local->fw_ap) {
-		ret = hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID,
-					local->essid);
-		if (ret) {
-			printk("%s: Desired SSID setting failed\n", dev->name);
-			goto fail;
-		}
-	}
-
-	/* Setup TXRateControl, defaults to allow use of 1, 2, 5.5, and
-	 * 11 Mbps in automatic TX rate fallback and 1 and 2 Mbps as basic
-	 * rates */
-	if (local->tx_rate_control == 0) {
-		local->tx_rate_control =
-			HFA384X_RATES_1MBPS |
-			HFA384X_RATES_2MBPS |
-			HFA384X_RATES_5MBPS |
-			HFA384X_RATES_11MBPS;
-	}
-	if (local->basic_rates == 0)
-		local->basic_rates = HFA384X_RATES_1MBPS | HFA384X_RATES_2MBPS;
-
-	if (!local->fw_ap) {
-		ret = hostap_set_word(dev, HFA384X_RID_TXRATECONTROL,
-				      local->tx_rate_control);
-		if (ret) {
-			printk("%s: TXRateControl setting to %d failed\n",
-			       dev->name, local->tx_rate_control);
-			goto fail;
-		}
-
-		ret = hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES,
-				      local->tx_rate_control);
-		if (ret) {
-			printk("%s: cnfSupportedRates setting to %d failed\n",
-			       dev->name, local->tx_rate_control);
-		}
-
-		ret = hostap_set_word(dev, HFA384X_RID_CNFBASICRATES,
-				      local->basic_rates);
-		if (ret) {
-			printk("%s: cnfBasicRates setting to %d failed\n",
-			       dev->name, local->basic_rates);
-		}
-
-		ret = hostap_set_word(dev, HFA384X_RID_CREATEIBSS, 1);
-		if (ret) {
-			printk("%s: Create IBSS setting to 1 failed\n",
-			       dev->name);
-		}
-	}
-
-	if (local->name_set)
-		(void) hostap_set_string(dev, HFA384X_RID_CNFOWNNAME,
-					 local->name);
-
-	if (hostap_set_encryption(local)) {
-		printk(KERN_INFO "%s: could not configure encryption\n",
-		       dev->name);
-	}
-
-	(void) hostap_set_antsel(local);
-
-	if (hostap_set_roaming(local)) {
-		printk(KERN_INFO "%s: could not set host roaming\n",
-		       dev->name);
-	}
-
-	if (local->sta_fw_ver >= PRISM2_FW_VER(1,6,3) &&
-	    hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, local->enh_sec))
-		printk(KERN_INFO "%s: cnfEnhSecurity setting to 0x%x failed\n",
-		       dev->name, local->enh_sec);
-
-	/* 32-bit tallies were added in STA f/w 0.8.0, but they were apparently
-	 * not working correctly (last seven counters report bogus values).
-	 * This has been fixed in 0.8.2, so enable 32-bit tallies only
-	 * beginning with that firmware version. Another bug fix for 32-bit
-	 * tallies in 1.4.0; should 16-bit tallies be used for some other
-	 * versions, too? */
-	if (local->sta_fw_ver >= PRISM2_FW_VER(0,8,2)) {
-		if (hostap_set_word(dev, HFA384X_RID_CNFTHIRTY2TALLY, 1)) {
-			printk(KERN_INFO "%s: cnfThirty2Tally setting "
-			       "failed\n", dev->name);
-			local->tallies32 = 0;
-		} else
-			local->tallies32 = 1;
-	} else
-		local->tallies32 = 0;
-
-	hostap_set_auth_algs(local);
-
-	if (hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD,
-			    local->fragm_threshold)) {
-		printk(KERN_INFO "%s: setting FragmentationThreshold to %d "
-		       "failed\n", dev->name, local->fragm_threshold);
-	}
-
-	if (hostap_set_word(dev, HFA384X_RID_RTSTHRESHOLD,
-			    local->rts_threshold)) {
-		printk(KERN_INFO "%s: setting RTSThreshold to %d failed\n",
-		       dev->name, local->rts_threshold);
-	}
-
-	if (local->manual_retry_count >= 0 &&
-	    hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT,
-			    local->manual_retry_count)) {
-		printk(KERN_INFO "%s: setting cnfAltRetryCount to %d failed\n",
-		       dev->name, local->manual_retry_count);
-	}
-
-	if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1) &&
-	    hfa384x_get_rid(dev, HFA384X_RID_CNFDBMADJUST, &tmp, 2, 1) == 2) {
-		local->rssi_to_dBm = le16_to_cpu(tmp);
-	}
-
-	if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->wpa &&
-	    hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1)) {
-		printk(KERN_INFO "%s: setting ssnHandlingMode to 1 failed\n",
-		       dev->name);
-	}
-
-	if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->generic_elem &&
-	    hfa384x_set_rid(dev, HFA384X_RID_GENERICELEMENT,
-			    local->generic_elem, local->generic_elem_len)) {
-		printk(KERN_INFO "%s: setting genericElement failed\n",
-		       dev->name);
-	}
-
- fail:
-	return ret;
-}
-
-
-static int prism2_hw_init(struct net_device *dev, int initial)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int ret, first = 1;
-	unsigned long start, delay;
-
-	PDEBUG(DEBUG_FLOW, "prism2_hw_init()\n");
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits);
-
- init:
-	/* initialize HFA 384x */
-	ret = hfa384x_cmd_no_wait(dev, HFA384X_CMDCODE_INIT, 0);
-	if (ret) {
-		printk(KERN_INFO "%s: first command failed - assuming card "
-		       "does not have primary firmware\n", dev_info);
-	}
-
-	if (first && (HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) {
-		/* EvStat has Cmd bit set in some cases, so retry once if no
-		 * wait was needed */
-		HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF);
-		printk(KERN_DEBUG "%s: init command completed too quickly - "
-		       "retrying\n", dev->name);
-		first = 0;
-		goto init;
-	}
-
-	start = jiffies;
-	delay = jiffies + HFA384X_INIT_TIMEOUT;
-	while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) &&
-	       time_before(jiffies, delay))
-		yield();
-	if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) {
-		printk(KERN_DEBUG "%s: assuming no Primary image in "
-		       "flash - card initialization not completed\n",
-		       dev_info);
-		local->no_pri = 1;
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-			if (local->sram_type == -1)
-				local->sram_type = prism2_get_ram_size(local);
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-		return 1;
-	}
-	local->no_pri = 0;
-	printk(KERN_DEBUG "prism2_hw_init: initialized in %lu ms\n",
-	       (jiffies - start) * 1000 / HZ);
-	HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF);
-	return 0;
-}
-
-
-static int prism2_hw_init2(struct net_device *dev, int initial)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int i;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-	kfree(local->pda);
-	if (local->no_pri)
-		local->pda = NULL;
-	else
-		local->pda = prism2_read_pda(dev);
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-
-	hfa384x_disable_interrupts(dev);
-
-#ifndef final_version
-	HFA384X_OUTW(HFA384X_MAGIC, HFA384X_SWSUPPORT0_OFF);
-	if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) {
-		printk("SWSUPPORT0 write/read failed: %04X != %04X\n",
-		       HFA384X_INW(HFA384X_SWSUPPORT0_OFF), HFA384X_MAGIC);
-		goto failed;
-	}
-#endif
-
-	if (initial || local->pri_only) {
-		hfa384x_events_only_cmd(dev);
-		/* get card version information */
-		if (prism2_get_version_info(dev, HFA384X_RID_NICID, "NIC") ||
-		    prism2_get_version_info(dev, HFA384X_RID_PRIID, "PRI")) {
-			hfa384x_disable_interrupts(dev);
-			goto failed;
-		}
-
-		if (prism2_get_version_info(dev, HFA384X_RID_STAID, "STA")) {
-			printk(KERN_DEBUG "%s: Failed to read STA f/w version "
-			       "- only Primary f/w present\n", dev->name);
-			local->pri_only = 1;
-			return 0;
-		}
-		local->pri_only = 0;
-		hfa384x_disable_interrupts(dev);
-	}
-
-	/* FIX: could convert allocate_fid to use sleeping CmdCompl wait and
-	 * enable interrupts before this. This would also require some sort of
-	 * sleeping AllocEv waiting */
-
-	/* allocate TX FIDs */
-	local->txfid_len = PRISM2_TXFID_LEN;
-	for (i = 0; i < PRISM2_TXFID_COUNT; i++) {
-		local->txfid[i] = hfa384x_allocate_fid(dev, local->txfid_len);
-		if (local->txfid[i] == 0xffff && local->txfid_len > 1600) {
-			local->txfid[i] = hfa384x_allocate_fid(dev, 1600);
-			if (local->txfid[i] != 0xffff) {
-				printk(KERN_DEBUG "%s: Using shorter TX FID "
-				       "(1600 bytes)\n", dev->name);
-				local->txfid_len = 1600;
-			}
-		}
-		if (local->txfid[i] == 0xffff)
-			goto failed;
-		local->intransmitfid[i] = PRISM2_TXFID_EMPTY;
-	}
-
-	hfa384x_events_only_cmd(dev);
-
-	if (initial) {
-		u8 addr[ETH_ALEN] = {};
-		struct list_head *ptr;
-
-		prism2_check_sta_fw_version(local);
-
-		if (hfa384x_get_rid(dev, HFA384X_RID_CNFOWNMACADDR,
-				    addr, ETH_ALEN, 1) < 0) {
-			printk("%s: could not get own MAC address\n",
-			       dev->name);
-		}
-		eth_hw_addr_set(dev, addr);
-		list_for_each(ptr, &local->hostap_interfaces) {
-			iface = list_entry(ptr, struct hostap_interface, list);
-			eth_hw_addr_inherit(iface->dev, dev);
-		}
-	} else if (local->fw_ap)
-		prism2_check_sta_fw_version(local);
-
-	prism2_setup_rids(dev);
-
-	/* MAC is now configured, but port 0 is not yet enabled */
-	return 0;
-
- failed:
-	if (!local->no_pri)
-		printk(KERN_WARNING "%s: Initialization failed\n", dev_info);
-	return 1;
-}
-
-
-static int prism2_hw_enable(struct net_device *dev, int initial)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int was_resetting;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	was_resetting = local->hw_resetting;
-
-	if (hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0, NULL, NULL)) {
-		printk("%s: MAC port 0 enabling failed\n", dev->name);
-		return 1;
-	}
-
-	local->hw_ready = 1;
-	local->hw_reset_tries = 0;
-	local->hw_resetting = 0;
-	hfa384x_enable_interrupts(dev);
-
-	/* at least D-Link DWL-650 seems to require additional port reset
-	 * before it starts acting as an AP, so reset port automatically
-	 * here just in case */
-	if (initial && prism2_reset_port(dev)) {
-		printk("%s: MAC port 0 resetting failed\n", dev->name);
-		return 1;
-	}
-
-	if (was_resetting && netif_queue_stopped(dev)) {
-		/* If hw_reset() was called during pending transmit, netif
-		 * queue was stopped. Wake it up now since the wlan card has
-		 * been resetted. */
-		netif_wake_queue(dev);
-	}
-
-	return 0;
-}
-
-
-static int prism2_hw_config(struct net_device *dev, int initial)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->hw_downloading)
-		return 1;
-
-	if (prism2_hw_init(dev, initial)) {
-		return local->no_pri ? 0 : 1;
-	}
-
-	if (prism2_hw_init2(dev, initial))
-		return 1;
-
-	/* Enable firmware if secondary image is loaded and at least one of the
-	 * netdevices is up. */
-	if (!local->pri_only &&
-	    (initial == 0 || (initial == 2 && local->num_dev_open > 0))) {
-		if (!local->dev_enabled)
-			prism2_callback(local, PRISM2_CALLBACK_ENABLE);
-		local->dev_enabled = 1;
-		return prism2_hw_enable(dev, initial);
-	}
-
-	return 0;
-}
-
-
-static void prism2_hw_shutdown(struct net_device *dev, int no_disable)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* Allow only command completion events during disable */
-	hfa384x_events_only_cmd(dev);
-
-	local->hw_ready = 0;
-	if (local->dev_enabled)
-		prism2_callback(local, PRISM2_CALLBACK_DISABLE);
-	local->dev_enabled = 0;
-
-	if (local->func->card_present && !local->func->card_present(local)) {
-		printk(KERN_DEBUG "%s: card already removed or not configured "
-		       "during shutdown\n", dev->name);
-		return;
-	}
-
-	if ((no_disable & HOSTAP_HW_NO_DISABLE) == 0 &&
-	    hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0, NULL, NULL))
-		printk(KERN_WARNING "%s: Shutdown failed\n", dev_info);
-
-	hfa384x_disable_interrupts(dev);
-
-	if (no_disable & HOSTAP_HW_ENABLE_CMDCOMPL)
-		hfa384x_events_only_cmd(dev);
-	else
-		prism2_clear_cmd_queue(local);
-}
-
-
-static void prism2_hw_reset(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-#if 0
-	static long last_reset = 0;
-
-	/* do not reset card more than once per second to avoid ending up in a
-	 * busy loop resetting the card */
-	if (time_before_eq(jiffies, last_reset + HZ))
-		return;
-	last_reset = jiffies;
-#endif
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->hw_downloading)
-		return;
-
-	if (local->hw_resetting) {
-		printk(KERN_WARNING "%s: %s: already resetting card - "
-		       "ignoring reset request\n", dev_info, dev->name);
-		return;
-	}
-
-	local->hw_reset_tries++;
-	if (local->hw_reset_tries > 10) {
-		printk(KERN_WARNING "%s: too many reset tries, skipping\n",
-		       dev->name);
-		return;
-	}
-
-	printk(KERN_WARNING "%s: %s: resetting card\n", dev_info, dev->name);
-	hfa384x_disable_interrupts(dev);
-	local->hw_resetting = 1;
-	if (local->func->cor_sreset) {
-		/* Host system seems to hang in some cases with high traffic
-		 * load or shared interrupts during COR sreset. Disable shared
-		 * interrupts during reset to avoid these crashes. COS sreset
-		 * takes quite a long time, so it is unfortunate that this
-		 * seems to be needed. Anyway, I do not know of any better way
-		 * of avoiding the crash. */
-		disable_irq(dev->irq);
-		local->func->cor_sreset(local);
-		enable_irq(dev->irq);
-	}
-	prism2_hw_shutdown(dev, 1);
-	prism2_hw_config(dev, 0);
-	local->hw_resetting = 0;
-
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-	if (local->dl_pri) {
-		printk(KERN_DEBUG "%s: persistent download of primary "
-		       "firmware\n", dev->name);
-		if (prism2_download_genesis(local, local->dl_pri) < 0)
-			printk(KERN_WARNING "%s: download (PRI) failed\n",
-			       dev->name);
-	}
-
-	if (local->dl_sec) {
-		printk(KERN_DEBUG "%s: persistent download of secondary "
-		       "firmware\n", dev->name);
-		if (prism2_download_volatile(local, local->dl_sec) < 0)
-			printk(KERN_WARNING "%s: download (SEC) failed\n",
-			       dev->name);
-	}
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-
-	/* TODO: restore beacon TIM bits for STAs that have buffered frames */
-}
-
-
-static void prism2_schedule_reset(local_info_t *local)
-{
-	schedule_work(&local->reset_queue);
-}
-
-
-/* Called only as scheduled task after noticing card timeout in interrupt
- * context */
-static void handle_reset_queue(struct work_struct *work)
-{
-	local_info_t *local = container_of(work, local_info_t, reset_queue);
-
-	printk(KERN_DEBUG "%s: scheduled card reset\n", local->dev->name);
-	prism2_hw_reset(local->dev);
-
-	if (netif_queue_stopped(local->dev)) {
-		int i;
-
-		for (i = 0; i < PRISM2_TXFID_COUNT; i++)
-			if (local->intransmitfid[i] == PRISM2_TXFID_EMPTY) {
-				PDEBUG(DEBUG_EXTRA, "prism2_tx_timeout: "
-				       "wake up queue\n");
-				netif_wake_queue(local->dev);
-				break;
-			}
-	}
-}
-
-
-static int prism2_get_txfid_idx(local_info_t *local)
-{
-	int idx, end;
-	unsigned long flags;
-
-	spin_lock_irqsave(&local->txfidlock, flags);
-	end = idx = local->next_txfid;
-	do {
-		if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) {
-			local->intransmitfid[idx] = PRISM2_TXFID_RESERVED;
-			spin_unlock_irqrestore(&local->txfidlock, flags);
-			return idx;
-		}
-		idx++;
-		if (idx >= PRISM2_TXFID_COUNT)
-			idx = 0;
-	} while (idx != end);
-	spin_unlock_irqrestore(&local->txfidlock, flags);
-
-	PDEBUG(DEBUG_EXTRA2, "prism2_get_txfid_idx: no room in txfid buf: "
-	       "packet dropped\n");
-	local->dev->stats.tx_dropped++;
-
-	return -1;
-}
-
-
-/* Called only from hardware IRQ */
-static void prism2_transmit_cb(struct net_device *dev, long context,
-			       u16 resp0, u16 res)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int idx = (int) context;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (res) {
-		printk(KERN_DEBUG "%s: prism2_transmit_cb - res=0x%02x\n",
-		       dev->name, res);
-		return;
-	}
-
-	if (idx < 0 || idx >= PRISM2_TXFID_COUNT) {
-		printk(KERN_DEBUG "%s: prism2_transmit_cb called with invalid "
-		       "idx=%d\n", dev->name, idx);
-		return;
-	}
-
-	if (!test_and_clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) {
-		printk(KERN_DEBUG "%s: driver bug: prism2_transmit_cb called "
-		       "with no pending transmit\n", dev->name);
-	}
-
-	if (netif_queue_stopped(dev)) {
-		/* ready for next TX, so wake up queue that was stopped in
-		 * prism2_transmit() */
-		netif_wake_queue(dev);
-	}
-
-	spin_lock(&local->txfidlock);
-
-	/* With reclaim, Resp0 contains new txfid for transmit; the old txfid
-	 * will be automatically allocated for the next TX frame */
-	local->intransmitfid[idx] = resp0;
-
-	PDEBUG(DEBUG_FID, "%s: prism2_transmit_cb: txfid[%d]=0x%04x, "
-	       "resp0=0x%04x, transmit_txfid=0x%04x\n",
-	       dev->name, idx, local->txfid[idx],
-	       resp0, local->intransmitfid[local->next_txfid]);
-
-	idx++;
-	if (idx >= PRISM2_TXFID_COUNT)
-		idx = 0;
-	local->next_txfid = idx;
-
-	/* check if all TX buffers are occupied */
-	do {
-		if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) {
-			spin_unlock(&local->txfidlock);
-			return;
-		}
-		idx++;
-		if (idx >= PRISM2_TXFID_COUNT)
-			idx = 0;
-	} while (idx != local->next_txfid);
-	spin_unlock(&local->txfidlock);
-
-	/* no empty TX buffers, stop queue */
-	netif_stop_queue(dev);
-}
-
-
-/* Called only from software IRQ if PCI bus master is not used (with bus master
- * this can be called both from software and hardware IRQ) */
-static int prism2_transmit(struct net_device *dev, int idx)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int res;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* The driver tries to stop netif queue so that there would not be
-	 * more than one attempt to transmit frames going on; check that this
-	 * is really the case */
-
-	if (test_and_set_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) {
-		printk(KERN_DEBUG "%s: driver bug - prism2_transmit() called "
-		       "when previous TX was pending\n", dev->name);
-		return -1;
-	}
-
-	/* stop the queue for the time that transmit is pending */
-	netif_stop_queue(dev);
-
-	/* transmit packet */
-	res = hfa384x_cmd_callback(
-		dev,
-		HFA384X_CMDCODE_TRANSMIT | HFA384X_CMD_TX_RECLAIM,
-		local->txfid[idx],
-		prism2_transmit_cb, (long) idx);
-
-	if (res) {
-		printk(KERN_DEBUG "%s: prism2_transmit: CMDCODE_TRANSMIT "
-		       "failed (res=%d)\n", dev->name, res);
-		dev->stats.tx_dropped++;
-		netif_wake_queue(dev);
-		return -1;
-	}
-	netif_trans_update(dev);
-
-	/* Since we did not wait for command completion, the card continues
-	 * to process on the background and we will finish handling when
-	 * command completion event is handled (prism2_cmd_ev() function) */
-
-	return 0;
-}
-
-
-/* Send IEEE 802.11 frame (convert the header into Prism2 TX descriptor and
- * send the payload with this descriptor) */
-/* Called only from software IRQ */
-static int prism2_tx_80211(struct sk_buff *skb, struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct hfa384x_tx_frame txdesc;
-	struct hostap_skb_tx_data *meta;
-	int hdr_len, data_len, idx, res, ret = -1;
-	u16 tx_control;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-
-	prism2_callback(local, PRISM2_CALLBACK_TX_START);
-
-	if ((local->func->card_present && !local->func->card_present(local)) ||
-	    !local->hw_ready || local->hw_downloading || local->pri_only) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: prism2_tx_80211: hw not ready -"
-			       " skipping\n", dev->name);
-		}
-		goto fail;
-	}
-
-	memset(&txdesc, 0, sizeof(txdesc));
-
-	/* skb->data starts with txdesc->frame_control */
-	hdr_len = sizeof(txdesc.header);
-	BUILD_BUG_ON(hdr_len != 24);
-	skb_copy_from_linear_data(skb, &txdesc.header, hdr_len);
-	if (ieee80211_is_data(txdesc.frame_control) &&
-	    ieee80211_has_a4(txdesc.frame_control) &&
-	    skb->len >= 30) {
-		/* Addr4 */
-		skb_copy_from_linear_data_offset(skb, hdr_len, txdesc.addr4,
-						 ETH_ALEN);
-		hdr_len += ETH_ALEN;
-	}
-
-	tx_control = local->tx_control;
-	if (meta->tx_cb_idx) {
-		tx_control |= HFA384X_TX_CTRL_TX_OK;
-		txdesc.sw_support = cpu_to_le32(meta->tx_cb_idx);
-	}
-	txdesc.tx_control = cpu_to_le16(tx_control);
-	txdesc.tx_rate = meta->rate;
-
-	data_len = skb->len - hdr_len;
-	txdesc.data_len = cpu_to_le16(data_len);
-	txdesc.len = cpu_to_be16(data_len);
-
-	idx = prism2_get_txfid_idx(local);
-	if (idx < 0)
-		goto fail;
-
-	if (local->frame_dump & PRISM2_DUMP_TX_HDR)
-		hostap_dump_tx_header(dev->name, &txdesc);
-
-	spin_lock(&local->baplock);
-	res = hfa384x_setup_bap(dev, BAP0, local->txfid[idx], 0);
-
-	if (!res)
-		res = hfa384x_to_bap(dev, BAP0, &txdesc, sizeof(txdesc));
-	if (!res)
-		res = hfa384x_to_bap(dev, BAP0, skb->data + hdr_len,
-				     skb->len - hdr_len);
-	spin_unlock(&local->baplock);
-
-	if (!res)
-		res = prism2_transmit(dev, idx);
-	if (res) {
-		printk(KERN_DEBUG "%s: prism2_tx_80211 - to BAP0 failed\n",
-		       dev->name);
-		local->intransmitfid[idx] = PRISM2_TXFID_EMPTY;
-		schedule_work(&local->reset_queue);
-		goto fail;
-	}
-
-	ret = 0;
-
-fail:
-	prism2_callback(local, PRISM2_CALLBACK_TX_END);
-	return ret;
-}
-
-
-/* Some SMP systems have reported number of odd errors with hostap_pci. fid
- * register has changed values between consecutive reads for an unknown reason.
- * This should really not happen, so more debugging is needed. This test
- * version is a bit slower, but it will detect most of such register changes
- * and will try to get the correct fid eventually. */
-#define EXTRA_FID_READ_TESTS
-
-static u16 prism2_read_fid_reg(struct net_device *dev, u16 reg)
-{
-#ifdef EXTRA_FID_READ_TESTS
-	u16 val, val2, val3;
-	int i;
-
-	for (i = 0; i < 10; i++) {
-		val = HFA384X_INW(reg);
-		val2 = HFA384X_INW(reg);
-		val3 = HFA384X_INW(reg);
-
-		if (val == val2 && val == val3)
-			return val;
-
-		printk(KERN_DEBUG "%s: detected fid change (try=%d, reg=%04x):"
-		       " %04x %04x %04x\n",
-		       dev->name, i, reg, val, val2, val3);
-		if ((val == val2 || val == val3) && val != 0)
-			return val;
-		if (val2 == val3 && val2 != 0)
-			return val2;
-	}
-	printk(KERN_WARNING "%s: Uhhuh.. could not read good fid from reg "
-	       "%04x (%04x %04x %04x)\n", dev->name, reg, val, val2, val3);
-	return val;
-#else /* EXTRA_FID_READ_TESTS */
-	return HFA384X_INW(reg);
-#endif /* EXTRA_FID_READ_TESTS */
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_rx(local_info_t *local)
-{
-	struct net_device *dev = local->dev;
-	int res, rx_pending = 0;
-	u16 len, hdr_len, rxfid, status, macport;
-	struct hfa384x_rx_frame rxdesc;
-	struct sk_buff *skb = NULL;
-
-	prism2_callback(local, PRISM2_CALLBACK_RX_START);
-
-	rxfid = prism2_read_fid_reg(dev, HFA384X_RXFID_OFF);
-#ifndef final_version
-	if (rxfid == 0) {
-		rxfid = HFA384X_INW(HFA384X_RXFID_OFF);
-		printk(KERN_DEBUG "prism2_rx: rxfid=0 (next 0x%04x)\n",
-		       rxfid);
-		if (rxfid == 0) {
-			schedule_work(&local->reset_queue);
-			goto rx_dropped;
-		}
-		/* try to continue with the new rxfid value */
-	}
-#endif
-
-	spin_lock(&local->baplock);
-	res = hfa384x_setup_bap(dev, BAP0, rxfid, 0);
-	if (!res)
-		res = hfa384x_from_bap(dev, BAP0, &rxdesc, sizeof(rxdesc));
-
-	if (res) {
-		spin_unlock(&local->baplock);
-		printk(KERN_DEBUG "%s: copy from BAP0 failed %d\n", dev->name,
-		       res);
-		if (res == -ETIMEDOUT) {
-			schedule_work(&local->reset_queue);
-		}
-		goto rx_dropped;
-	}
-
-	len = le16_to_cpu(rxdesc.data_len);
-	hdr_len = sizeof(rxdesc);
-	status = le16_to_cpu(rxdesc.status);
-	macport = (status >> 8) & 0x07;
-
-	/* Drop frames with too large reported payload length. Monitor mode
-	 * seems to sometimes pass frames (e.g., ctrl::ack) with signed and
-	 * negative value, so allow also values 65522 .. 65534 (-14 .. -2) for
-	 * macport 7 */
-	if (len > PRISM2_DATA_MAXLEN + 8 /* WEP */) {
-		if (macport == 7 && local->iw_mode == IW_MODE_MONITOR) {
-			if (len >= (u16) -14) {
-				hdr_len -= 65535 - len;
-				hdr_len--;
-			}
-			len = 0;
-		} else {
-			spin_unlock(&local->baplock);
-			printk(KERN_DEBUG "%s: Received frame with invalid "
-			       "length 0x%04x\n", dev->name, len);
-			hostap_dump_rx_header(dev->name, &rxdesc);
-			goto rx_dropped;
-		}
-	}
-
-	skb = dev_alloc_skb(len + hdr_len);
-	if (!skb) {
-		spin_unlock(&local->baplock);
-		printk(KERN_DEBUG "%s: RX failed to allocate skb\n",
-		       dev->name);
-		goto rx_dropped;
-	}
-	skb->dev = dev;
-	skb_put_data(skb, &rxdesc, hdr_len);
-
-	if (len > 0)
-		res = hfa384x_from_bap(dev, BAP0, skb_put(skb, len), len);
-	spin_unlock(&local->baplock);
-	if (res) {
-		printk(KERN_DEBUG "%s: RX failed to read "
-		       "frame data\n", dev->name);
-		goto rx_dropped;
-	}
-
-	skb_queue_tail(&local->rx_list, skb);
-	tasklet_schedule(&local->rx_tasklet);
-
- rx_exit:
-	prism2_callback(local, PRISM2_CALLBACK_RX_END);
-	if (!rx_pending) {
-		HFA384X_OUTW(HFA384X_EV_RX, HFA384X_EVACK_OFF);
-	}
-
-	return;
-
- rx_dropped:
-	dev->stats.rx_dropped++;
-	if (skb)
-		dev_kfree_skb(skb);
-	goto rx_exit;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void hostap_rx_skb(local_info_t *local, struct sk_buff *skb)
-{
-	struct hfa384x_rx_frame *rxdesc;
-	struct net_device *dev = skb->dev;
-	struct hostap_80211_rx_status stats;
-	int hdrlen, rx_hdrlen;
-
-	rx_hdrlen = sizeof(*rxdesc);
-	if (skb->len < sizeof(*rxdesc)) {
-		/* Allow monitor mode to receive shorter frames */
-		if (local->iw_mode == IW_MODE_MONITOR &&
-		    skb->len >= sizeof(*rxdesc) - 30) {
-			rx_hdrlen = skb->len;
-		} else {
-			dev_kfree_skb(skb);
-			return;
-		}
-	}
-
-	rxdesc = (struct hfa384x_rx_frame *) skb->data;
-
-	if (local->frame_dump & PRISM2_DUMP_RX_HDR &&
-	    skb->len >= sizeof(*rxdesc))
-		hostap_dump_rx_header(dev->name, rxdesc);
-
-	if (le16_to_cpu(rxdesc->status) & HFA384X_RX_STATUS_FCSERR &&
-	    (!local->monitor_allow_fcserr ||
-	     local->iw_mode != IW_MODE_MONITOR))
-		goto drop;
-
-	if (skb->len > PRISM2_DATA_MAXLEN) {
-		printk(KERN_DEBUG "%s: RX: len(%d) > MAX(%d)\n",
-		       dev->name, skb->len, PRISM2_DATA_MAXLEN);
-		goto drop;
-	}
-
-	stats.mac_time = le32_to_cpu(rxdesc->time);
-	stats.signal = rxdesc->signal - local->rssi_to_dBm;
-	stats.noise = rxdesc->silence - local->rssi_to_dBm;
-	stats.rate = rxdesc->rate;
-
-	/* Convert Prism2 RX structure into IEEE 802.11 header */
-	hdrlen = hostap_80211_get_hdrlen(rxdesc->frame_control);
-	if (hdrlen > rx_hdrlen)
-		hdrlen = rx_hdrlen;
-
-	memmove(skb_pull(skb, rx_hdrlen - hdrlen),
-		&rxdesc->frame_control, hdrlen);
-
-	hostap_80211_rx(dev, skb, &stats);
-	return;
-
- drop:
-	dev_kfree_skb(skb);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void hostap_rx_tasklet(struct tasklet_struct *t)
-{
-	local_info_t *local = from_tasklet(local, t, rx_tasklet);
-	struct sk_buff *skb;
-
-	while ((skb = skb_dequeue(&local->rx_list)) != NULL)
-		hostap_rx_skb(local, skb);
-}
-
-
-/* Called only from hardware IRQ */
-static void prism2_alloc_ev(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int idx;
-	u16 fid;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	fid = prism2_read_fid_reg(dev, HFA384X_ALLOCFID_OFF);
-
-	PDEBUG(DEBUG_FID, "FID: interrupt: ALLOC - fid=0x%04x\n", fid);
-
-	spin_lock(&local->txfidlock);
-	idx = local->next_alloc;
-
-	do {
-		if (local->txfid[idx] == fid) {
-			PDEBUG(DEBUG_FID, "FID: found matching txfid[%d]\n",
-			       idx);
-
-#ifndef final_version
-			if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY)
-				printk("Already released txfid found at idx "
-				       "%d\n", idx);
-			if (local->intransmitfid[idx] == PRISM2_TXFID_RESERVED)
-				printk("Already reserved txfid found at idx "
-				       "%d\n", idx);
-#endif
-			local->intransmitfid[idx] = PRISM2_TXFID_EMPTY;
-			idx++;
-			local->next_alloc = idx >= PRISM2_TXFID_COUNT ? 0 :
-				idx;
-
-			if (!test_bit(HOSTAP_BITS_TRANSMIT, &local->bits) &&
-			    netif_queue_stopped(dev))
-				netif_wake_queue(dev);
-
-			spin_unlock(&local->txfidlock);
-			return;
-		}
-
-		idx++;
-		if (idx >= PRISM2_TXFID_COUNT)
-			idx = 0;
-	} while (idx != local->next_alloc);
-
-	printk(KERN_WARNING "%s: could not find matching txfid (0x%04x, new "
-	       "read 0x%04x) for alloc event\n", dev->name, fid,
-	       HFA384X_INW(HFA384X_ALLOCFID_OFF));
-	printk(KERN_DEBUG "TXFIDs:");
-	for (idx = 0; idx < PRISM2_TXFID_COUNT; idx++)
-		printk(" %04x[%04x]", local->txfid[idx],
-		       local->intransmitfid[idx]);
-	printk("\n");
-	spin_unlock(&local->txfidlock);
-
-	/* FIX: should probably schedule reset; reference to one txfid was lost
-	 * completely.. Bad things will happen if we run out of txfids
-	 * Actually, this will cause netdev watchdog to notice TX timeout and
-	 * then card reset after all txfids have been leaked. */
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void hostap_tx_callback(local_info_t *local,
-			       struct hfa384x_tx_frame *txdesc, int ok,
-			       char *payload)
-{
-	u16 sw_support, hdrlen, len;
-	struct sk_buff *skb;
-	struct hostap_tx_callback_info *cb;
-
-	/* Make sure that frame was from us. */
-	if (!ether_addr_equal(txdesc->addr2, local->dev->dev_addr)) {
-		printk(KERN_DEBUG "%s: TX callback - foreign frame\n",
-		       local->dev->name);
-		return;
-	}
-
-	sw_support = le32_to_cpu(txdesc->sw_support);
-
-	spin_lock(&local->lock);
-	cb = local->tx_callback;
-	while (cb != NULL && cb->idx != sw_support)
-		cb = cb->next;
-	spin_unlock(&local->lock);
-
-	if (cb == NULL) {
-		printk(KERN_DEBUG "%s: could not find TX callback (idx %d)\n",
-		       local->dev->name, sw_support);
-		return;
-	}
-
-	hdrlen = hostap_80211_get_hdrlen(txdesc->frame_control);
-	len = le16_to_cpu(txdesc->data_len);
-	skb = dev_alloc_skb(hdrlen + len);
-	if (skb == NULL) {
-		printk(KERN_DEBUG "%s: hostap_tx_callback failed to allocate "
-		       "skb\n", local->dev->name);
-		return;
-	}
-
-	skb_put_data(skb, (void *)&txdesc->frame_control, hdrlen);
-	if (payload)
-		skb_put_data(skb, payload, len);
-
-	skb->dev = local->dev;
-	skb_reset_mac_header(skb);
-
-	cb->func(skb, ok, cb->data);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static int hostap_tx_compl_read(local_info_t *local, int error,
-				struct hfa384x_tx_frame *txdesc,
-				char **payload)
-{
-	u16 fid, len;
-	int res, ret = 0;
-	struct net_device *dev = local->dev;
-
-	fid = prism2_read_fid_reg(dev, HFA384X_TXCOMPLFID_OFF);
-
-	PDEBUG(DEBUG_FID, "interrupt: TX (err=%d) - fid=0x%04x\n", fid, error);
-
-	spin_lock(&local->baplock);
-	res = hfa384x_setup_bap(dev, BAP0, fid, 0);
-	if (!res)
-		res = hfa384x_from_bap(dev, BAP0, txdesc, sizeof(*txdesc));
-	if (res) {
-		PDEBUG(DEBUG_EXTRA, "%s: TX (err=%d) - fid=0x%04x - could not "
-		       "read txdesc\n", dev->name, error, fid);
-		if (res == -ETIMEDOUT) {
-			schedule_work(&local->reset_queue);
-		}
-		ret = -1;
-		goto fail;
-	}
-	if (txdesc->sw_support) {
-		len = le16_to_cpu(txdesc->data_len);
-		if (len < PRISM2_DATA_MAXLEN) {
-			*payload = kmalloc(len, GFP_ATOMIC);
-			if (*payload == NULL ||
-			    hfa384x_from_bap(dev, BAP0, *payload, len)) {
-				PDEBUG(DEBUG_EXTRA, "%s: could not read TX "
-				       "frame payload\n", dev->name);
-				kfree(*payload);
-				*payload = NULL;
-				ret = -1;
-				goto fail;
-			}
-		}
-	}
-
- fail:
-	spin_unlock(&local->baplock);
-
-	return ret;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_tx_ev(local_info_t *local)
-{
-	struct net_device *dev = local->dev;
-	char *payload = NULL;
-	struct hfa384x_tx_frame txdesc;
-
-	if (hostap_tx_compl_read(local, 0, &txdesc, &payload))
-		goto fail;
-
-	if (local->frame_dump & PRISM2_DUMP_TX_HDR) {
-		PDEBUG(DEBUG_EXTRA, "%s: TX - status=0x%04x "
-		       "retry_count=%d tx_rate=%d seq_ctrl=%d "
-		       "duration_id=%d\n",
-		       dev->name, le16_to_cpu(txdesc.status),
-		       txdesc.retry_count, txdesc.tx_rate,
-		       le16_to_cpu(txdesc.seq_ctrl),
-		       le16_to_cpu(txdesc.duration_id));
-	}
-
-	if (txdesc.sw_support)
-		hostap_tx_callback(local, &txdesc, 1, payload);
-	kfree(payload);
-
- fail:
-	HFA384X_OUTW(HFA384X_EV_TX, HFA384X_EVACK_OFF);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void hostap_sta_tx_exc_tasklet(struct tasklet_struct *t)
-{
-	local_info_t *local = from_tasklet(local, t, sta_tx_exc_tasklet);
-	struct sk_buff *skb;
-
-	while ((skb = skb_dequeue(&local->sta_tx_exc_list)) != NULL) {
-		struct hfa384x_tx_frame *txdesc =
-			(struct hfa384x_tx_frame *) skb->data;
-
-		if (skb->len >= sizeof(*txdesc)) {
-			/* Convert Prism2 RX structure into IEEE 802.11 header
-			 */
-			int hdrlen = hostap_80211_get_hdrlen(txdesc->frame_control);
-			memmove(skb_pull(skb, sizeof(*txdesc) - hdrlen),
-				&txdesc->frame_control, hdrlen);
-
-			hostap_handle_sta_tx_exc(local, skb);
-		}
-		dev_kfree_skb(skb);
-	}
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_txexc(local_info_t *local)
-{
-	struct net_device *dev = local->dev;
-	u16 status, fc;
-	int show_dump, res;
-	char *payload = NULL;
-	struct hfa384x_tx_frame txdesc;
-
-	show_dump = local->frame_dump & PRISM2_DUMP_TXEXC_HDR;
-	dev->stats.tx_errors++;
-
-	res = hostap_tx_compl_read(local, 1, &txdesc, &payload);
-	HFA384X_OUTW(HFA384X_EV_TXEXC, HFA384X_EVACK_OFF);
-	if (res)
-		return;
-
-	status = le16_to_cpu(txdesc.status);
-
-	/* We produce a TXDROP event only for retry or lifetime
-	 * exceeded, because that's the only status that really mean
-	 * that this particular node went away.
-	 * Other errors means that *we* screwed up. - Jean II */
-	if (status & (HFA384X_TX_STATUS_RETRYERR | HFA384X_TX_STATUS_AGEDERR))
-	{
-		union iwreq_data wrqu;
-
-		/* Copy 802.11 dest address. */
-		memcpy(wrqu.addr.sa_data, txdesc.addr1, ETH_ALEN);
-		wrqu.addr.sa_family = ARPHRD_ETHER;
-		wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
-	} else
-		show_dump = 1;
-
-	if (local->iw_mode == IW_MODE_MASTER ||
-	    local->iw_mode == IW_MODE_REPEAT ||
-	    local->wds_type & HOSTAP_WDS_AP_CLIENT) {
-		struct sk_buff *skb;
-		skb = dev_alloc_skb(sizeof(txdesc));
-		if (skb) {
-			skb_put_data(skb, &txdesc, sizeof(txdesc));
-			skb_queue_tail(&local->sta_tx_exc_list, skb);
-			tasklet_schedule(&local->sta_tx_exc_tasklet);
-		}
-	}
-
-	if (txdesc.sw_support)
-		hostap_tx_callback(local, &txdesc, 0, payload);
-	kfree(payload);
-
-	if (!show_dump)
-		return;
-
-	PDEBUG(DEBUG_EXTRA, "%s: TXEXC - status=0x%04x (%s%s%s%s)"
-	       " tx_control=%04x\n",
-	       dev->name, status,
-	       status & HFA384X_TX_STATUS_RETRYERR ? "[RetryErr]" : "",
-	       status & HFA384X_TX_STATUS_AGEDERR ? "[AgedErr]" : "",
-	       status & HFA384X_TX_STATUS_DISCON ? "[Discon]" : "",
-	       status & HFA384X_TX_STATUS_FORMERR ? "[FormErr]" : "",
-	       le16_to_cpu(txdesc.tx_control));
-
-	fc = le16_to_cpu(txdesc.frame_control);
-	PDEBUG(DEBUG_EXTRA, "   retry_count=%d tx_rate=%d fc=0x%04x "
-	       "(%s%s%s::%d%s%s)\n",
-	       txdesc.retry_count, txdesc.tx_rate, fc,
-	       ieee80211_is_mgmt(txdesc.frame_control) ? "Mgmt" : "",
-	       ieee80211_is_ctl(txdesc.frame_control) ? "Ctrl" : "",
-	       ieee80211_is_data(txdesc.frame_control) ? "Data" : "",
-	       (fc & IEEE80211_FCTL_STYPE) >> 4,
-	       ieee80211_has_tods(txdesc.frame_control) ? " ToDS" : "",
-	       ieee80211_has_fromds(txdesc.frame_control) ? " FromDS" : "");
-	PDEBUG(DEBUG_EXTRA, "   A1=%pM A2=%pM A3=%pM A4=%pM\n",
-	       txdesc.addr1, txdesc.addr2,
-	       txdesc.addr3, txdesc.addr4);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void hostap_info_tasklet(struct tasklet_struct *t)
-{
-	local_info_t *local = from_tasklet(local, t, info_tasklet);
-	struct sk_buff *skb;
-
-	while ((skb = skb_dequeue(&local->info_list)) != NULL) {
-		hostap_info_process(local, skb);
-		dev_kfree_skb(skb);
-	}
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_info(local_info_t *local)
-{
-	struct net_device *dev = local->dev;
-	u16 fid;
-	int res, left;
-	struct hfa384x_info_frame info;
-	struct sk_buff *skb;
-
-	fid = HFA384X_INW(HFA384X_INFOFID_OFF);
-
-	spin_lock(&local->baplock);
-	res = hfa384x_setup_bap(dev, BAP0, fid, 0);
-	if (!res)
-		res = hfa384x_from_bap(dev, BAP0, &info, sizeof(info));
-	if (res) {
-		spin_unlock(&local->baplock);
-		printk(KERN_DEBUG "Could not get info frame (fid=0x%04x)\n",
-		       fid);
-		if (res == -ETIMEDOUT) {
-			schedule_work(&local->reset_queue);
-		}
-		goto out;
-	}
-
-	left = (le16_to_cpu(info.len) - 1) * 2;
-
-	if (info.len & cpu_to_le16(0x8000) || info.len == 0 || left > 2060) {
-		/* data register seems to give 0x8000 in some error cases even
-		 * though busy bit is not set in offset register;
-		 * in addition, length must be at least 1 due to type field */
-		spin_unlock(&local->baplock);
-		printk(KERN_DEBUG "%s: Received info frame with invalid "
-		       "length 0x%04x (type 0x%04x)\n", dev->name,
-		       le16_to_cpu(info.len), le16_to_cpu(info.type));
-		goto out;
-	}
-
-	skb = dev_alloc_skb(sizeof(info) + left);
-	if (skb == NULL) {
-		spin_unlock(&local->baplock);
-		printk(KERN_DEBUG "%s: Could not allocate skb for info "
-		       "frame\n", dev->name);
-		goto out;
-	}
-
-	skb_put_data(skb, &info, sizeof(info));
-	if (left > 0 && hfa384x_from_bap(dev, BAP0, skb_put(skb, left), left))
-	{
-		spin_unlock(&local->baplock);
-		printk(KERN_WARNING "%s: Info frame read failed (fid=0x%04x, "
-		       "len=0x%04x, type=0x%04x\n", dev->name, fid,
-		       le16_to_cpu(info.len), le16_to_cpu(info.type));
-		dev_kfree_skb(skb);
-		goto out;
-	}
-	spin_unlock(&local->baplock);
-
-	skb_queue_tail(&local->info_list, skb);
-	tasklet_schedule(&local->info_tasklet);
-
- out:
-	HFA384X_OUTW(HFA384X_EV_INFO, HFA384X_EVACK_OFF);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void hostap_bap_tasklet(struct tasklet_struct *t)
-{
-	local_info_t *local = from_tasklet(local, t, bap_tasklet);
-	struct net_device *dev = local->dev;
-	u16 ev;
-	int frames = 30;
-
-	if (local->func->card_present && !local->func->card_present(local))
-		return;
-
-	set_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits);
-
-	/* Process all pending BAP events without generating new interrupts
-	 * for them */
-	while (frames-- > 0) {
-		ev = HFA384X_INW(HFA384X_EVSTAT_OFF);
-		if (ev == 0xffff || !(ev & HFA384X_BAP0_EVENTS))
-			break;
-		if (ev & HFA384X_EV_RX)
-			prism2_rx(local);
-		if (ev & HFA384X_EV_INFO)
-			prism2_info(local);
-		if (ev & HFA384X_EV_TX)
-			prism2_tx_ev(local);
-		if (ev & HFA384X_EV_TXEXC)
-			prism2_txexc(local);
-	}
-
-	set_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits);
-	clear_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits);
-
-	/* Enable interrupts for new BAP events */
-	hfa384x_events_all(dev);
-	clear_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits);
-}
-
-
-/* Called only from hardware IRQ */
-static void prism2_infdrop(struct net_device *dev)
-{
-	static unsigned long last_inquire = 0;
-
-	PDEBUG(DEBUG_EXTRA, "%s: INFDROP event\n", dev->name);
-
-	/* some firmware versions seem to get stuck with
-	 * full CommTallies in high traffic load cases; every
-	 * packet will then cause INFDROP event and CommTallies
-	 * info frame will not be sent automatically. Try to
-	 * get out of this state by inquiring CommTallies. */
-	if (!last_inquire || time_after(jiffies, last_inquire + HZ)) {
-		hfa384x_cmd_callback(dev, HFA384X_CMDCODE_INQUIRE,
-				     HFA384X_INFO_COMMTALLIES, NULL, 0);
-		last_inquire = jiffies;
-	}
-}
-
-
-/* Called only from hardware IRQ */
-static void prism2_ev_tick(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	u16 evstat, inten;
-	static int prev_stuck = 0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (time_after(jiffies, local->last_tick_timer + 5 * HZ) &&
-	    local->last_tick_timer) {
-		evstat = HFA384X_INW(HFA384X_EVSTAT_OFF);
-		inten = HFA384X_INW(HFA384X_INTEN_OFF);
-		if (!prev_stuck) {
-			printk(KERN_INFO "%s: SW TICK stuck? "
-			       "bits=0x%lx EvStat=%04x IntEn=%04x\n",
-			       dev->name, local->bits, evstat, inten);
-		}
-		local->sw_tick_stuck++;
-		if ((evstat & HFA384X_BAP0_EVENTS) &&
-		    (inten & HFA384X_BAP0_EVENTS)) {
-			printk(KERN_INFO "%s: trying to recover from IRQ "
-			       "hang\n", dev->name);
-			hfa384x_events_no_bap0(dev);
-		}
-		prev_stuck = 1;
-	} else
-		prev_stuck = 0;
-}
-
-
-/* Called only from hardware IRQ */
-static void prism2_check_magic(local_info_t *local)
-{
-	/* at least PCI Prism2.5 with bus mastering seems to sometimes
-	 * return 0x0000 in SWSUPPORT0 for unknown reason, but re-reading the
-	 * register once or twice seems to get the correct value.. PCI cards
-	 * cannot anyway be removed during normal operation, so there is not
-	 * really any need for this verification with them. */
-
-#ifndef PRISM2_PCI
-#ifndef final_version
-	static unsigned long last_magic_err = 0;
-	struct net_device *dev = local->dev;
-
-	if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) {
-		if (!local->hw_ready)
-			return;
-		HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF);
-		if (time_after(jiffies, last_magic_err + 10 * HZ)) {
-			printk("%s: Interrupt, but SWSUPPORT0 does not match: "
-			       "%04X != %04X - card removed?\n", dev->name,
-			       HFA384X_INW(HFA384X_SWSUPPORT0_OFF),
-			       HFA384X_MAGIC);
-			last_magic_err = jiffies;
-		} else if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: interrupt - SWSUPPORT0=%04x "
-			       "MAGIC=%04x\n", dev->name,
-			       HFA384X_INW(HFA384X_SWSUPPORT0_OFF),
-			       HFA384X_MAGIC);
-		}
-		if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != 0xffff)
-			schedule_work(&local->reset_queue);
-		return;
-	}
-#endif /* final_version */
-#endif /* !PRISM2_PCI */
-}
-
-
-/* Called only from hardware IRQ */
-static irqreturn_t prism2_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int events = 0;
-	u16 ev;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* Detect early interrupt before driver is fully configured */
-	spin_lock(&local->irq_init_lock);
-	if (!dev->base_addr) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",
-			       dev->name);
-		}
-		spin_unlock(&local->irq_init_lock);
-		return IRQ_HANDLED;
-	}
-	spin_unlock(&local->irq_init_lock);
-
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0);
-
-	if (local->func->card_present && !local->func->card_present(local)) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: Interrupt, but dev not OK\n",
-			       dev->name);
-		}
-		return IRQ_HANDLED;
-	}
-
-	prism2_check_magic(local);
-
-	for (;;) {
-		ev = HFA384X_INW(HFA384X_EVSTAT_OFF);
-		if (ev == 0xffff) {
-			if (local->shutdown)
-				return IRQ_HANDLED;
-			HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF);
-			printk(KERN_DEBUG "%s: prism2_interrupt: ev=0xffff\n",
-			       dev->name);
-			return IRQ_HANDLED;
-		}
-
-		ev &= HFA384X_INW(HFA384X_INTEN_OFF);
-		if (ev == 0)
-			break;
-
-		if (ev & HFA384X_EV_CMD) {
-			prism2_cmd_ev(dev);
-		}
-
-		/* Above events are needed even before hw is ready, but other
-		 * events should be skipped during initialization. This may
-		 * change for AllocEv if allocate_fid is implemented without
-		 * busy waiting. */
-		if (!local->hw_ready || local->hw_resetting ||
-		    !local->dev_enabled) {
-			ev = HFA384X_INW(HFA384X_EVSTAT_OFF);
-			if (ev & HFA384X_EV_CMD)
-				goto next_event;
-			if ((ev & HFA384X_EVENT_MASK) == 0)
-				return IRQ_HANDLED;
-			if (local->dev_enabled && (ev & ~HFA384X_EV_TICK) &&
-			    net_ratelimit()) {
-				printk(KERN_DEBUG "%s: prism2_interrupt: hw "
-				       "not ready; skipping events 0x%04x "
-				       "(IntEn=0x%04x)%s%s%s\n",
-				       dev->name, ev,
-				       HFA384X_INW(HFA384X_INTEN_OFF),
-				       !local->hw_ready ? " (!hw_ready)" : "",
-				       local->hw_resetting ?
-				       " (hw_resetting)" : "",
-				       !local->dev_enabled ?
-				       " (!dev_enabled)" : "");
-			}
-			HFA384X_OUTW(ev, HFA384X_EVACK_OFF);
-			return IRQ_HANDLED;
-		}
-
-		if (ev & HFA384X_EV_TICK) {
-			prism2_ev_tick(dev);
-			HFA384X_OUTW(HFA384X_EV_TICK, HFA384X_EVACK_OFF);
-		}
-
-		if (ev & HFA384X_EV_ALLOC) {
-			prism2_alloc_ev(dev);
-			HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF);
-		}
-
-		/* Reading data from the card is quite time consuming, so do it
-		 * in tasklets. TX, TXEXC, RX, and INFO events will be ACKed
-		 * and unmasked after needed data has been read completely. */
-		if (ev & HFA384X_BAP0_EVENTS) {
-			hfa384x_events_no_bap0(dev);
-			tasklet_schedule(&local->bap_tasklet);
-		}
-
-#ifndef final_version
-		if (ev & HFA384X_EV_WTERR) {
-			PDEBUG(DEBUG_EXTRA, "%s: WTERR event\n", dev->name);
-			HFA384X_OUTW(HFA384X_EV_WTERR, HFA384X_EVACK_OFF);
-		}
-#endif /* final_version */
-
-		if (ev & HFA384X_EV_INFDROP) {
-			prism2_infdrop(dev);
-			HFA384X_OUTW(HFA384X_EV_INFDROP, HFA384X_EVACK_OFF);
-		}
-
-	next_event:
-		events++;
-		if (events >= PRISM2_MAX_INTERRUPT_EVENTS) {
-			PDEBUG(DEBUG_EXTRA, "prism2_interrupt: >%d events "
-			       "(EvStat=0x%04x)\n",
-			       PRISM2_MAX_INTERRUPT_EVENTS,
-			       HFA384X_INW(HFA384X_EVSTAT_OFF));
-			break;
-		}
-	}
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 1);
-	return IRQ_RETVAL(events);
-}
-
-
-static void prism2_check_sta_fw_version(local_info_t *local)
-{
-	struct hfa384x_comp_ident comp;
-	int id, variant, major, minor;
-
-	if (hfa384x_get_rid(local->dev, HFA384X_RID_STAID,
-			    &comp, sizeof(comp), 1) < 0)
-		return;
-
-	local->fw_ap = 0;
-	id = le16_to_cpu(comp.id);
-	if (id != HFA384X_COMP_ID_STA) {
-		if (id == HFA384X_COMP_ID_FW_AP)
-			local->fw_ap = 1;
-		return;
-	}
-
-	major = __le16_to_cpu(comp.major);
-	minor = __le16_to_cpu(comp.minor);
-	variant = __le16_to_cpu(comp.variant);
-	local->sta_fw_ver = PRISM2_FW_VER(major, minor, variant);
-
-	/* Station firmware versions before 1.4.x seem to have a bug in
-	 * firmware-based WEP encryption when using Host AP mode, so use
-	 * host_encrypt as a default for them. Firmware version 1.4.9 is the
-	 * first one that has been seen to produce correct encryption, but the
-	 * bug might be fixed before that (although, at least 1.4.2 is broken).
-	 */
-	local->fw_encrypt_ok = local->sta_fw_ver >= PRISM2_FW_VER(1,4,9);
-
-	if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt &&
-	    !local->fw_encrypt_ok) {
-		printk(KERN_DEBUG "%s: defaulting to host-based encryption as "
-		       "a workaround for firmware bug in Host AP mode WEP\n",
-		       local->dev->name);
-		local->host_encrypt = 1;
-	}
-
-	/* IEEE 802.11 standard compliant WDS frames (4 addresses) were broken
-	 * in station firmware versions before 1.5.x. With these versions, the
-	 * driver uses a workaround with bogus frame format (4th address after
-	 * the payload). This is not compatible with other AP devices. Since
-	 * the firmware bug is fixed in the latest station firmware versions,
-	 * automatically enable standard compliant mode for cards using station
-	 * firmware version 1.5.0 or newer. */
-	if (local->sta_fw_ver >= PRISM2_FW_VER(1,5,0))
-		local->wds_type |= HOSTAP_WDS_STANDARD_FRAME;
-	else {
-		printk(KERN_DEBUG "%s: defaulting to bogus WDS frame as a "
-		       "workaround for firmware bug in Host AP mode WDS\n",
-		       local->dev->name);
-	}
-
-	hostap_check_sta_fw_version(local->ap, local->sta_fw_ver);
-}
-
-
-static void hostap_passive_scan(struct timer_list *t)
-{
-	local_info_t *local = from_timer(local, t, passive_scan_timer);
-	struct net_device *dev = local->dev;
-	u16 chan;
-
-	if (local->passive_scan_interval <= 0)
-		return;
-
-	if (local->passive_scan_state == PASSIVE_SCAN_LISTEN) {
-		int max_tries = 16;
-
-		/* Even though host system does not really know when the WLAN
-		 * MAC is sending frames, try to avoid changing channels for
-		 * passive scanning when a host-generated frame is being
-		 * transmitted */
-		if (test_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) {
-			printk(KERN_DEBUG "%s: passive scan detected pending "
-			       "TX - delaying\n", dev->name);
-			local->passive_scan_timer.expires = jiffies + HZ / 10;
-			add_timer(&local->passive_scan_timer);
-			return;
-		}
-
-		do {
-			local->passive_scan_channel++;
-			if (local->passive_scan_channel > 14)
-				local->passive_scan_channel = 1;
-			max_tries--;
-		} while (!(local->channel_mask &
-			   (1 << (local->passive_scan_channel - 1))) &&
-			 max_tries > 0);
-
-		if (max_tries == 0) {
-			printk(KERN_INFO "%s: no allowed passive scan channels"
-			       " found\n", dev->name);
-			return;
-		}
-
-		printk(KERN_DEBUG "%s: passive scan channel %d\n",
-		       dev->name, local->passive_scan_channel);
-		chan = local->passive_scan_channel;
-		local->passive_scan_state = PASSIVE_SCAN_WAIT;
-		local->passive_scan_timer.expires = jiffies + HZ / 10;
-	} else {
-		chan = local->channel;
-		local->passive_scan_state = PASSIVE_SCAN_LISTEN;
-		local->passive_scan_timer.expires = jiffies +
-			local->passive_scan_interval * HZ;
-	}
-
-	if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST |
-				 (HFA384X_TEST_CHANGE_CHANNEL << 8),
-				 chan, NULL, 0))
-		printk(KERN_ERR "%s: passive scan channel set %d "
-		       "failed\n", dev->name, chan);
-
-	add_timer(&local->passive_scan_timer);
-}
-
-
-/* Called only as a scheduled task when communications quality values should
- * be updated. */
-static void handle_comms_qual_update(struct work_struct *work)
-{
-	local_info_t *local =
-		container_of(work, local_info_t, comms_qual_update);
-	prism2_update_comms_qual(local->dev);
-}
-
-
-/* Software watchdog - called as a timer. Hardware interrupt (Tick event) is
- * used to monitor that local->last_tick_timer is being updated. If not,
- * interrupt busy-loop is assumed and driver tries to recover by masking out
- * some events. */
-static void hostap_tick_timer(struct timer_list *t)
-{
-	static unsigned long last_inquire = 0;
-	local_info_t *local = from_timer(local, t, tick_timer);
-	local->last_tick_timer = jiffies;
-
-	/* Inquire CommTallies every 10 seconds to keep the statistics updated
-	 * more often during low load and when using 32-bit tallies. */
-	if ((!last_inquire || time_after(jiffies, last_inquire + 10 * HZ)) &&
-	    !local->hw_downloading && local->hw_ready &&
-	    !local->hw_resetting && local->dev_enabled) {
-		hfa384x_cmd_callback(local->dev, HFA384X_CMDCODE_INQUIRE,
-				     HFA384X_INFO_COMMTALLIES, NULL, 0);
-		last_inquire = jiffies;
-	}
-
-	if ((local->last_comms_qual_update == 0 ||
-	     time_after(jiffies, local->last_comms_qual_update + 10 * HZ)) &&
-	    (local->iw_mode == IW_MODE_INFRA ||
-	     local->iw_mode == IW_MODE_ADHOC)) {
-		schedule_work(&local->comms_qual_update);
-	}
-
-	local->tick_timer.expires = jiffies + 2 * HZ;
-	add_timer(&local->tick_timer);
-}
-
-
-#if !defined(PRISM2_NO_PROCFS_DEBUG) && defined(CONFIG_PROC_FS)
-static u16 hfa384x_read_reg(struct net_device *dev, u16 reg)
-{
-	return HFA384X_INW(reg);
-}
-
-static int prism2_registers_proc_show(struct seq_file *m, void *v)
-{
-	local_info_t *local = m->private;
-
-#define SHOW_REG(n) \
-  seq_printf(m, #n "=%04x\n", hfa384x_read_reg(local->dev, HFA384X_##n##_OFF))
-
-	SHOW_REG(CMD);
-	SHOW_REG(PARAM0);
-	SHOW_REG(PARAM1);
-	SHOW_REG(PARAM2);
-	SHOW_REG(STATUS);
-	SHOW_REG(RESP0);
-	SHOW_REG(RESP1);
-	SHOW_REG(RESP2);
-	SHOW_REG(INFOFID);
-	SHOW_REG(CONTROL);
-	SHOW_REG(SELECT0);
-	SHOW_REG(SELECT1);
-	SHOW_REG(OFFSET0);
-	SHOW_REG(OFFSET1);
-	SHOW_REG(RXFID);
-	SHOW_REG(ALLOCFID);
-	SHOW_REG(TXCOMPLFID);
-	SHOW_REG(SWSUPPORT0);
-	SHOW_REG(SWSUPPORT1);
-	SHOW_REG(SWSUPPORT2);
-	SHOW_REG(EVSTAT);
-	SHOW_REG(INTEN);
-	SHOW_REG(EVACK);
-	/* Do not read data registers, because they change the state of the
-	 * MAC (offset += 2) */
-	/* SHOW_REG(DATA0); */
-	/* SHOW_REG(DATA1); */
-	SHOW_REG(AUXPAGE);
-	SHOW_REG(AUXOFFSET);
-	/* SHOW_REG(AUXDATA); */
-#ifdef PRISM2_PCI
-	SHOW_REG(PCICOR);
-	SHOW_REG(PCIHCR);
-	SHOW_REG(PCI_M0_ADDRH);
-	SHOW_REG(PCI_M0_ADDRL);
-	SHOW_REG(PCI_M0_LEN);
-	SHOW_REG(PCI_M0_CTL);
-	SHOW_REG(PCI_STATUS);
-	SHOW_REG(PCI_M1_ADDRH);
-	SHOW_REG(PCI_M1_ADDRL);
-	SHOW_REG(PCI_M1_LEN);
-	SHOW_REG(PCI_M1_CTL);
-#endif /* PRISM2_PCI */
-
-	return 0;
-}
-#endif
-
-struct set_tim_data {
-	struct list_head list;
-	int aid;
-	int set;
-};
-
-static int prism2_set_tim(struct net_device *dev, int aid, int set)
-{
-	struct list_head *ptr;
-	struct set_tim_data *new_entry;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	new_entry = kzalloc(sizeof(*new_entry), GFP_ATOMIC);
-	if (new_entry == NULL)
-		return -ENOMEM;
-
-	new_entry->aid = aid;
-	new_entry->set = set;
-
-	spin_lock_bh(&local->set_tim_lock);
-	list_for_each(ptr, &local->set_tim_list) {
-		struct set_tim_data *entry =
-			list_entry(ptr, struct set_tim_data, list);
-		if (entry->aid == aid) {
-			PDEBUG(DEBUG_PS2, "%s: prism2_set_tim: aid=%d "
-			       "set=%d ==> %d\n",
-			       local->dev->name, aid, entry->set, set);
-			entry->set = set;
-			kfree(new_entry);
-			new_entry = NULL;
-			break;
-		}
-	}
-	if (new_entry)
-		list_add_tail(&new_entry->list, &local->set_tim_list);
-	spin_unlock_bh(&local->set_tim_lock);
-
-	schedule_work(&local->set_tim_queue);
-
-	return 0;
-}
-
-
-static void handle_set_tim_queue(struct work_struct *work)
-{
-	local_info_t *local = container_of(work, local_info_t, set_tim_queue);
-	struct set_tim_data *entry;
-	u16 val;
-
-	for (;;) {
-		entry = NULL;
-		spin_lock_bh(&local->set_tim_lock);
-		if (!list_empty(&local->set_tim_list)) {
-			entry = list_entry(local->set_tim_list.next,
-					   struct set_tim_data, list);
-			list_del(&entry->list);
-		}
-		spin_unlock_bh(&local->set_tim_lock);
-		if (!entry)
-			break;
-
-		PDEBUG(DEBUG_PS2, "%s: handle_set_tim_queue: aid=%d set=%d\n",
-		       local->dev->name, entry->aid, entry->set);
-
-		val = entry->aid;
-		if (entry->set)
-			val |= 0x8000;
-		if (hostap_set_word(local->dev, HFA384X_RID_CNFTIMCTRL, val)) {
-			printk(KERN_DEBUG "%s: set_tim failed (aid=%d "
-			       "set=%d)\n",
-			       local->dev->name, entry->aid, entry->set);
-		}
-
-		kfree(entry);
-	}
-}
-
-
-static void prism2_clear_set_tim_queue(local_info_t *local)
-{
-	struct list_head *ptr, *n;
-
-	list_for_each_safe(ptr, n, &local->set_tim_list) {
-		struct set_tim_data *entry;
-		entry = list_entry(ptr, struct set_tim_data, list);
-		list_del(&entry->list);
-		kfree(entry);
-	}
-}
-
-
-/*
- * HostAP uses two layers of net devices, where the inner
- * layer gets called all the time from the outer layer.
- * This is a natural nesting, which needs a split lock type.
- */
-static struct lock_class_key hostap_netdev_xmit_lock_key;
-static struct lock_class_key hostap_netdev_addr_lock_key;
-
-static void prism2_set_lockdep_class_one(struct net_device *dev,
-					 struct netdev_queue *txq,
-					 void *_unused)
-{
-	lockdep_set_class(&txq->_xmit_lock,
-			  &hostap_netdev_xmit_lock_key);
-}
-
-static void prism2_set_lockdep_class(struct net_device *dev)
-{
-	lockdep_set_class(&dev->addr_list_lock,
-			  &hostap_netdev_addr_lock_key);
-	netdev_for_each_tx_queue(dev, prism2_set_lockdep_class_one, NULL);
-}
-
-static struct net_device *
-prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx,
-		       struct device *sdev)
-{
-	struct net_device *dev;
-	struct hostap_interface *iface;
-	struct local_info *local;
-	int len, i, ret;
-
-	if (funcs == NULL)
-		return NULL;
-
-	len = strlen(dev_template);
-	if (len >= IFNAMSIZ || strstr(dev_template, "%d") == NULL) {
-		printk(KERN_WARNING "hostap: Invalid dev_template='%s'\n",
-		       dev_template);
-		return NULL;
-	}
-
-	len = sizeof(struct hostap_interface) +
-		3 + sizeof(struct local_info) +
-		3 + sizeof(struct ap_data);
-
-	dev = alloc_etherdev(len);
-	if (dev == NULL)
-		return NULL;
-
-	iface = netdev_priv(dev);
-	local = (struct local_info *) ((((long) (iface + 1)) + 3) & ~3);
-	local->ap = (struct ap_data *) ((((long) (local + 1)) + 3) & ~3);
-	local->dev = iface->dev = dev;
-	iface->local = local;
-	iface->type = HOSTAP_INTERFACE_MASTER;
-	INIT_LIST_HEAD(&local->hostap_interfaces);
-
-	local->hw_module = THIS_MODULE;
-
-#ifdef PRISM2_IO_DEBUG
-	local->io_debug_enabled = 1;
-#endif /* PRISM2_IO_DEBUG */
-
-	local->func = funcs;
-	local->func->cmd = hfa384x_cmd;
-	local->func->read_regs = hfa384x_read_regs;
-	local->func->get_rid = hfa384x_get_rid;
-	local->func->set_rid = hfa384x_set_rid;
-	local->func->hw_enable = prism2_hw_enable;
-	local->func->hw_config = prism2_hw_config;
-	local->func->hw_reset = prism2_hw_reset;
-	local->func->hw_shutdown = prism2_hw_shutdown;
-	local->func->reset_port = prism2_reset_port;
-	local->func->schedule_reset = prism2_schedule_reset;
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-	local->func->read_aux_proc_ops = &prism2_download_aux_dump_proc_ops;
-	local->func->download = prism2_download;
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-	local->func->tx = prism2_tx_80211;
-	local->func->set_tim = prism2_set_tim;
-	local->func->need_tx_headroom = 0; /* no need to add txdesc in
-					    * skb->data (FIX: maybe for DMA bus
-					    * mastering? */
-
-	local->mtu = mtu;
-
-	rwlock_init(&local->iface_lock);
-	spin_lock_init(&local->txfidlock);
-	spin_lock_init(&local->cmdlock);
-	spin_lock_init(&local->baplock);
-	spin_lock_init(&local->lock);
-	spin_lock_init(&local->irq_init_lock);
-	mutex_init(&local->rid_bap_mtx);
-
-	if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES)
-		card_idx = 0;
-	local->card_idx = card_idx;
-
-	len = strlen(essid);
-	memcpy(local->essid, essid,
-	       len > MAX_SSID_LEN ? MAX_SSID_LEN : len);
-	local->essid[MAX_SSID_LEN] = '\0';
-	i = GET_INT_PARM(iw_mode, card_idx);
-	if ((i >= IW_MODE_ADHOC && i <= IW_MODE_REPEAT) ||
-	    i == IW_MODE_MONITOR) {
-		local->iw_mode = i;
-	} else {
-		printk(KERN_WARNING "prism2: Unknown iw_mode %d; using "
-		       "IW_MODE_MASTER\n", i);
-		local->iw_mode = IW_MODE_MASTER;
-	}
-	local->channel = GET_INT_PARM(channel, card_idx);
-	local->beacon_int = GET_INT_PARM(beacon_int, card_idx);
-	local->dtim_period = GET_INT_PARM(dtim_period, card_idx);
-	local->wds_max_connections = 16;
-	local->tx_control = HFA384X_TX_CTRL_FLAGS;
-	local->manual_retry_count = -1;
-	local->rts_threshold = 2347;
-	local->fragm_threshold = 2346;
-	local->rssi_to_dBm = 100; /* default; to be overriden by
-				   * cnfDbmAdjust, if available */
-	local->auth_algs = PRISM2_AUTH_OPEN | PRISM2_AUTH_SHARED_KEY;
-	local->sram_type = -1;
-	local->scan_channel_mask = 0xffff;
-	local->monitor_type = PRISM2_MONITOR_RADIOTAP;
-
-	/* Initialize task queue structures */
-	INIT_WORK(&local->reset_queue, handle_reset_queue);
-	INIT_WORK(&local->set_multicast_list_queue,
-		  hostap_set_multicast_list_queue);
-
-	INIT_WORK(&local->set_tim_queue, handle_set_tim_queue);
-	INIT_LIST_HEAD(&local->set_tim_list);
-	spin_lock_init(&local->set_tim_lock);
-
-	INIT_WORK(&local->comms_qual_update, handle_comms_qual_update);
-
-	/* Initialize tasklets for handling hardware IRQ related operations
-	 * outside hw IRQ handler */
-	tasklet_setup(&local->bap_tasklet, hostap_bap_tasklet);
-	tasklet_setup(&local->info_tasklet, hostap_info_tasklet);
-	hostap_info_init(local);
-
-	tasklet_setup(&local->rx_tasklet, hostap_rx_tasklet);
-	skb_queue_head_init(&local->rx_list);
-
-	tasklet_setup(&local->sta_tx_exc_tasklet,
-			    hostap_sta_tx_exc_tasklet);
-	skb_queue_head_init(&local->sta_tx_exc_list);
-
-	INIT_LIST_HEAD(&local->cmd_queue);
-	init_waitqueue_head(&local->hostscan_wq);
-
-	lib80211_crypt_info_init(&local->crypt_info, dev->name, &local->lock);
-
-	timer_setup(&local->passive_scan_timer, hostap_passive_scan, 0);
-	timer_setup(&local->tick_timer, hostap_tick_timer, 0);
-	local->tick_timer.expires = jiffies + 2 * HZ;
-	add_timer(&local->tick_timer);
-
-	INIT_LIST_HEAD(&local->bss_list);
-
-	hostap_setup_dev(dev, local, HOSTAP_INTERFACE_MASTER);
-
-	dev->type = ARPHRD_IEEE80211;
-	dev->header_ops = &hostap_80211_ops;
-
-	rtnl_lock();
-	ret = dev_alloc_name(dev, "wifi%d");
-	SET_NETDEV_DEV(dev, sdev);
-	if (ret >= 0)
-		ret = register_netdevice(dev);
-
-	prism2_set_lockdep_class(dev);
-	rtnl_unlock();
-	if (ret < 0) {
-		printk(KERN_WARNING "%s: register netdevice failed!\n",
-		       dev_info);
-		goto fail;
-	}
-	printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name);
-
-	hostap_init_data(local);
-	return dev;
-
- fail:
-	free_netdev(dev);
-	return NULL;
-}
-
-
-static int hostap_hw_ready(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	struct local_info *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	local->ddev = hostap_add_interface(local, HOSTAP_INTERFACE_MAIN, 0,
-					   "", dev_template);
-
-	if (local->ddev) {
-		if (local->iw_mode == IW_MODE_INFRA ||
-		    local->iw_mode == IW_MODE_ADHOC) {
-			netif_carrier_off(local->dev);
-			netif_carrier_off(local->ddev);
-		}
-		hostap_init_proc(local);
-#ifndef PRISM2_NO_PROCFS_DEBUG
-		proc_create_single_data("registers", 0, local->proc,
-				 prism2_registers_proc_show, local);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-		hostap_init_ap_proc(local);
-		return 0;
-	}
-
-	return -1;
-}
-
-
-static void prism2_free_local_data(struct net_device *dev)
-{
-	struct hostap_tx_callback_info *tx_cb, *tx_cb_prev;
-	int i;
-	struct hostap_interface *iface;
-	struct local_info *local;
-	struct list_head *ptr, *n;
-
-	if (dev == NULL)
-		return;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* Unregister all netdevs before freeing local data. */
-	list_for_each_safe(ptr, n, &local->hostap_interfaces) {
-		iface = list_entry(ptr, struct hostap_interface, list);
-		if (iface->type == HOSTAP_INTERFACE_MASTER) {
-			/* special handling for this interface below */
-			continue;
-		}
-		hostap_remove_interface(iface->dev, 0, 1);
-	}
-
-	unregister_netdev(local->dev);
-
-	flush_work(&local->reset_queue);
-	flush_work(&local->set_multicast_list_queue);
-	flush_work(&local->set_tim_queue);
-#ifndef PRISM2_NO_STATION_MODES
-	flush_work(&local->info_queue);
-#endif
-	flush_work(&local->comms_qual_update);
-
-	lib80211_crypt_info_free(&local->crypt_info);
-
-	if (timer_pending(&local->passive_scan_timer))
-		del_timer(&local->passive_scan_timer);
-
-	if (timer_pending(&local->tick_timer))
-		del_timer(&local->tick_timer);
-
-	prism2_clear_cmd_queue(local);
-
-	skb_queue_purge(&local->info_list);
-	skb_queue_purge(&local->rx_list);
-	skb_queue_purge(&local->sta_tx_exc_list);
-
-	if (local->dev_enabled)
-		prism2_callback(local, PRISM2_CALLBACK_DISABLE);
-
-	if (local->ap != NULL)
-		hostap_free_data(local->ap);
-
-#ifndef PRISM2_NO_PROCFS_DEBUG
-	if (local->proc != NULL)
-		remove_proc_entry("registers", local->proc);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-	hostap_remove_proc(local);
-
-	tx_cb = local->tx_callback;
-	while (tx_cb != NULL) {
-		tx_cb_prev = tx_cb;
-		tx_cb = tx_cb->next;
-		kfree(tx_cb_prev);
-	}
-
-	hostap_set_hostapd(local, 0, 0);
-	hostap_set_hostapd_sta(local, 0, 0);
-
-	for (i = 0; i < PRISM2_FRAG_CACHE_LEN; i++) {
-		if (local->frag_cache[i].skb != NULL)
-			dev_kfree_skb(local->frag_cache[i].skb);
-	}
-
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-	prism2_download_free_data(local->dl_pri);
-	prism2_download_free_data(local->dl_sec);
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-
-	prism2_clear_set_tim_queue(local);
-
-	list_for_each_safe(ptr, n, &local->bss_list) {
-		struct hostap_bss_info *bss =
-			list_entry(ptr, struct hostap_bss_info, list);
-		kfree(bss);
-	}
-
-	kfree(local->pda);
-	kfree(local->last_scan_results);
-	kfree(local->generic_elem);
-
-	free_netdev(local->dev);
-}
-
-
-#if defined(PRISM2_PCI) || defined(PRISM2_PCCARD)
-static void __maybe_unused prism2_suspend(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	struct local_info *local;
-	union iwreq_data wrqu;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* Send disconnect event, e.g., to trigger reassociation after resume
-	 * if wpa_supplicant is used. */
-	memset(&wrqu, 0, sizeof(wrqu));
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL);
-
-	/* Disable hardware and firmware */
-	prism2_hw_shutdown(dev, 0);
-}
-#endif /* PRISM2_PCI || PRISM2_PCCARD */
-
-
-/* These might at some point be compiled separately and used as separate
- * kernel modules or linked into one */
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-#include "hostap_download.c"
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-
-#ifdef PRISM2_CALLBACK
-/* External hostap_callback.c file can be used to, e.g., blink activity led.
- * This can use platform specific code and must define prism2_callback()
- * function (if PRISM2_CALLBACK is not defined, these function calls are not
- * used. */
-#include "hostap_callback.c"
-#endif /* PRISM2_CALLBACK */
diff --git a/drivers/net/wireless/intersil/hostap/hostap_info.c b/drivers/net/wireless/intersil/hostap/hostap_info.c
deleted file mode 100644
index da8c30f10d..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_info.c
+++ /dev/null
@@ -1,509 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Host AP driver Info Frame processing (part of hostap.o module) */
-
-#include <linux/if_arp.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/etherdevice.h>
-#include "hostap_wlan.h"
-#include "hostap.h"
-#include "hostap_ap.h"
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_info_commtallies16(local_info_t *local, unsigned char *buf,
-				      int left)
-{
-	struct hfa384x_comm_tallies *tallies;
-
-	if (left < sizeof(struct hfa384x_comm_tallies)) {
-		printk(KERN_DEBUG "%s: too short (len=%d) commtallies "
-		       "info frame\n", local->dev->name, left);
-		return;
-	}
-
-	tallies = (struct hfa384x_comm_tallies *) buf;
-#define ADD_COMM_TALLIES(name) \
-local->comm_tallies.name += le16_to_cpu(tallies->name)
-	ADD_COMM_TALLIES(tx_unicast_frames);
-	ADD_COMM_TALLIES(tx_multicast_frames);
-	ADD_COMM_TALLIES(tx_fragments);
-	ADD_COMM_TALLIES(tx_unicast_octets);
-	ADD_COMM_TALLIES(tx_multicast_octets);
-	ADD_COMM_TALLIES(tx_deferred_transmissions);
-	ADD_COMM_TALLIES(tx_single_retry_frames);
-	ADD_COMM_TALLIES(tx_multiple_retry_frames);
-	ADD_COMM_TALLIES(tx_retry_limit_exceeded);
-	ADD_COMM_TALLIES(tx_discards);
-	ADD_COMM_TALLIES(rx_unicast_frames);
-	ADD_COMM_TALLIES(rx_multicast_frames);
-	ADD_COMM_TALLIES(rx_fragments);
-	ADD_COMM_TALLIES(rx_unicast_octets);
-	ADD_COMM_TALLIES(rx_multicast_octets);
-	ADD_COMM_TALLIES(rx_fcs_errors);
-	ADD_COMM_TALLIES(rx_discards_no_buffer);
-	ADD_COMM_TALLIES(tx_discards_wrong_sa);
-	ADD_COMM_TALLIES(rx_discards_wep_undecryptable);
-	ADD_COMM_TALLIES(rx_message_in_msg_fragments);
-	ADD_COMM_TALLIES(rx_message_in_bad_msg_fragments);
-#undef ADD_COMM_TALLIES
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_info_commtallies32(local_info_t *local, unsigned char *buf,
-				      int left)
-{
-	struct hfa384x_comm_tallies32 *tallies;
-
-	if (left < sizeof(struct hfa384x_comm_tallies32)) {
-		printk(KERN_DEBUG "%s: too short (len=%d) commtallies32 "
-		       "info frame\n", local->dev->name, left);
-		return;
-	}
-
-	tallies = (struct hfa384x_comm_tallies32 *) buf;
-#define ADD_COMM_TALLIES(name) \
-local->comm_tallies.name += le32_to_cpu(tallies->name)
-	ADD_COMM_TALLIES(tx_unicast_frames);
-	ADD_COMM_TALLIES(tx_multicast_frames);
-	ADD_COMM_TALLIES(tx_fragments);
-	ADD_COMM_TALLIES(tx_unicast_octets);
-	ADD_COMM_TALLIES(tx_multicast_octets);
-	ADD_COMM_TALLIES(tx_deferred_transmissions);
-	ADD_COMM_TALLIES(tx_single_retry_frames);
-	ADD_COMM_TALLIES(tx_multiple_retry_frames);
-	ADD_COMM_TALLIES(tx_retry_limit_exceeded);
-	ADD_COMM_TALLIES(tx_discards);
-	ADD_COMM_TALLIES(rx_unicast_frames);
-	ADD_COMM_TALLIES(rx_multicast_frames);
-	ADD_COMM_TALLIES(rx_fragments);
-	ADD_COMM_TALLIES(rx_unicast_octets);
-	ADD_COMM_TALLIES(rx_multicast_octets);
-	ADD_COMM_TALLIES(rx_fcs_errors);
-	ADD_COMM_TALLIES(rx_discards_no_buffer);
-	ADD_COMM_TALLIES(tx_discards_wrong_sa);
-	ADD_COMM_TALLIES(rx_discards_wep_undecryptable);
-	ADD_COMM_TALLIES(rx_message_in_msg_fragments);
-	ADD_COMM_TALLIES(rx_message_in_bad_msg_fragments);
-#undef ADD_COMM_TALLIES
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_info_commtallies(local_info_t *local, unsigned char *buf,
-				    int left)
-{
-	if (local->tallies32)
-		prism2_info_commtallies32(local, buf, left);
-	else
-		prism2_info_commtallies16(local, buf, left);
-}
-
-
-#ifndef PRISM2_NO_STATION_MODES
-#ifndef PRISM2_NO_DEBUG
-static const char* hfa384x_linkstatus_str(u16 linkstatus)
-{
-	switch (linkstatus) {
-	case HFA384X_LINKSTATUS_CONNECTED:
-		return "Connected";
-	case HFA384X_LINKSTATUS_DISCONNECTED:
-		return "Disconnected";
-	case HFA384X_LINKSTATUS_AP_CHANGE:
-		return "Access point change";
-	case HFA384X_LINKSTATUS_AP_OUT_OF_RANGE:
-		return "Access point out of range";
-	case HFA384X_LINKSTATUS_AP_IN_RANGE:
-		return "Access point in range";
-	case HFA384X_LINKSTATUS_ASSOC_FAILED:
-		return "Association failed";
-	default:
-		return "Unknown";
-	}
-}
-#endif /* PRISM2_NO_DEBUG */
-
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_info_linkstatus(local_info_t *local, unsigned char *buf,
-				    int left)
-{
-	u16 val;
-	int non_sta_mode;
-
-	/* Alloc new JoinRequests to occur since LinkStatus for the previous
-	 * has been received */
-	local->last_join_time = 0;
-
-	if (left != 2) {
-		printk(KERN_DEBUG "%s: invalid linkstatus info frame "
-		       "length %d\n", local->dev->name, left);
-		return;
-	}
-
-	non_sta_mode = local->iw_mode == IW_MODE_MASTER ||
-		local->iw_mode == IW_MODE_REPEAT ||
-		local->iw_mode == IW_MODE_MONITOR;
-
-	val = buf[0] | (buf[1] << 8);
-	if (!non_sta_mode || val != HFA384X_LINKSTATUS_DISCONNECTED) {
-		PDEBUG(DEBUG_EXTRA, "%s: LinkStatus=%d (%s)\n",
-		       local->dev->name, val, hfa384x_linkstatus_str(val));
-	}
-
-	if (non_sta_mode) {
-		netif_carrier_on(local->dev);
-		netif_carrier_on(local->ddev);
-		return;
-	}
-
-	/* Get current BSSID later in scheduled task */
-	set_bit(PRISM2_INFO_PENDING_LINKSTATUS, &local->pending_info);
-	local->prev_link_status = val;
-	schedule_work(&local->info_queue);
-}
-
-
-static void prism2_host_roaming(local_info_t *local)
-{
-	struct hfa384x_join_request req;
-	struct net_device *dev = local->dev;
-	struct hfa384x_hostscan_result *selected, *entry;
-	int i;
-	unsigned long flags;
-
-	if (local->last_join_time &&
-	    time_before(jiffies, local->last_join_time + 10 * HZ)) {
-		PDEBUG(DEBUG_EXTRA, "%s: last join request has not yet been "
-		       "completed - waiting for it before issuing new one\n",
-		       dev->name);
-		return;
-	}
-
-	/* ScanResults are sorted: first ESS results in decreasing signal
-	 * quality then IBSS results in similar order.
-	 * Trivial roaming policy: just select the first entry.
-	 * This could probably be improved by adding hysteresis to limit
-	 * number of handoffs, etc.
-	 *
-	 * Could do periodic RID_SCANREQUEST or Inquire F101 to get new
-	 * ScanResults */
-	spin_lock_irqsave(&local->lock, flags);
-	if (local->last_scan_results == NULL ||
-	    local->last_scan_results_count == 0) {
-		spin_unlock_irqrestore(&local->lock, flags);
-		PDEBUG(DEBUG_EXTRA, "%s: no scan results for host roaming\n",
-		       dev->name);
-		return;
-	}
-
-	selected = &local->last_scan_results[0];
-
-	if (local->preferred_ap[0] || local->preferred_ap[1] ||
-	    local->preferred_ap[2] || local->preferred_ap[3] ||
-	    local->preferred_ap[4] || local->preferred_ap[5]) {
-		/* Try to find preferred AP */
-		PDEBUG(DEBUG_EXTRA, "%s: Preferred AP BSSID %pM\n",
-		       dev->name, local->preferred_ap);
-		for (i = 0; i < local->last_scan_results_count; i++) {
-			entry = &local->last_scan_results[i];
-			if (memcmp(local->preferred_ap, entry->bssid, 6) == 0)
-			{
-				PDEBUG(DEBUG_EXTRA, "%s: using preferred AP "
-				       "selection\n", dev->name);
-				selected = entry;
-				break;
-			}
-		}
-	}
-
-	memcpy(req.bssid, selected->bssid, ETH_ALEN);
-	req.channel = selected->chid;
-	spin_unlock_irqrestore(&local->lock, flags);
-
-	PDEBUG(DEBUG_EXTRA, "%s: JoinRequest: BSSID=%pM"
-	       " channel=%d\n",
-	       dev->name, req.bssid, le16_to_cpu(req.channel));
-	if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req,
-				 sizeof(req))) {
-		printk(KERN_DEBUG "%s: JoinRequest failed\n", dev->name);
-	}
-	local->last_join_time = jiffies;
-}
-
-
-static void hostap_report_scan_complete(local_info_t *local)
-{
-	union iwreq_data wrqu;
-
-	/* Inform user space about new scan results (just empty event,
-	 * SIOCGIWSCAN can be used to fetch data */
-	wrqu.data.length = 0;
-	wrqu.data.flags = 0;
-	wireless_send_event(local->dev, SIOCGIWSCAN, &wrqu, NULL);
-
-	/* Allow SIOCGIWSCAN handling to occur since we have received
-	 * scanning result */
-	local->scan_timestamp = 0;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_info_scanresults(local_info_t *local, unsigned char *buf,
-				    int left)
-{
-	u16 *pos;
-	int new_count, i;
-	unsigned long flags;
-	struct hfa384x_scan_result *res;
-	struct hfa384x_hostscan_result *results, *prev;
-
-	if (left < 4) {
-		printk(KERN_DEBUG "%s: invalid scanresult info frame "
-		       "length %d\n", local->dev->name, left);
-		return;
-	}
-
-	pos = (u16 *) buf;
-	pos++;
-	pos++;
-	left -= 4;
-
-	new_count = left / sizeof(struct hfa384x_scan_result);
-	results = kmalloc_array(new_count,
-				sizeof(struct hfa384x_hostscan_result),
-				GFP_ATOMIC);
-	if (results == NULL)
-		return;
-
-	/* Convert to hostscan result format. */
-	res = (struct hfa384x_scan_result *) pos;
-	for (i = 0; i < new_count; i++) {
-		memcpy(&results[i], &res[i],
-		       sizeof(struct hfa384x_scan_result));
-		results[i].atim = 0;
-	}
-
-	spin_lock_irqsave(&local->lock, flags);
-	local->last_scan_type = PRISM2_SCAN;
-	prev = local->last_scan_results;
-	local->last_scan_results = results;
-	local->last_scan_results_count = new_count;
-	spin_unlock_irqrestore(&local->lock, flags);
-	kfree(prev);
-
-	hostap_report_scan_complete(local);
-
-	/* Perform rest of ScanResults handling later in scheduled task */
-	set_bit(PRISM2_INFO_PENDING_SCANRESULTS, &local->pending_info);
-	schedule_work(&local->info_queue);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static void prism2_info_hostscanresults(local_info_t *local,
-					unsigned char *buf, int left)
-{
-	int i, result_size, copy_len, new_count;
-	struct hfa384x_hostscan_result *results, *prev;
-	unsigned long flags;
-	__le16 *pos;
-	u8 *ptr;
-
-	wake_up_interruptible(&local->hostscan_wq);
-
-	if (left < 4) {
-		printk(KERN_DEBUG "%s: invalid hostscanresult info frame "
-		       "length %d\n", local->dev->name, left);
-		return;
-	}
-
-	pos = (__le16 *) buf;
-	copy_len = result_size = le16_to_cpu(*pos);
-	if (result_size == 0) {
-		printk(KERN_DEBUG "%s: invalid result_size (0) in "
-		       "hostscanresults\n", local->dev->name);
-		return;
-	}
-	if (copy_len > sizeof(struct hfa384x_hostscan_result))
-		copy_len = sizeof(struct hfa384x_hostscan_result);
-
-	pos++;
-	pos++;
-	left -= 4;
-	ptr = (u8 *) pos;
-
-	new_count = left / result_size;
-	results = kcalloc(new_count, sizeof(struct hfa384x_hostscan_result),
-			  GFP_ATOMIC);
-	if (results == NULL)
-		return;
-
-	for (i = 0; i < new_count; i++) {
-		memcpy(&results[i], ptr, copy_len);
-		ptr += result_size;
-		left -= result_size;
-	}
-
-	if (left) {
-		printk(KERN_DEBUG "%s: short HostScan result entry (%d/%d)\n",
-		       local->dev->name, left, result_size);
-	}
-
-	spin_lock_irqsave(&local->lock, flags);
-	local->last_scan_type = PRISM2_HOSTSCAN;
-	prev = local->last_scan_results;
-	local->last_scan_results = results;
-	local->last_scan_results_count = new_count;
-	spin_unlock_irqrestore(&local->lock, flags);
-	kfree(prev);
-
-	hostap_report_scan_complete(local);
-}
-#endif /* PRISM2_NO_STATION_MODES */
-
-
-/* Called only as a tasklet (software IRQ) */
-void hostap_info_process(local_info_t *local, struct sk_buff *skb)
-{
-	struct hfa384x_info_frame *info;
-	unsigned char *buf;
-	int left;
-#ifndef PRISM2_NO_DEBUG
-	int i;
-#endif /* PRISM2_NO_DEBUG */
-
-	info = (struct hfa384x_info_frame *) skb->data;
-	buf = skb->data + sizeof(*info);
-	left = skb->len - sizeof(*info);
-
-	switch (le16_to_cpu(info->type)) {
-	case HFA384X_INFO_COMMTALLIES:
-		prism2_info_commtallies(local, buf, left);
-		break;
-
-#ifndef PRISM2_NO_STATION_MODES
-	case HFA384X_INFO_LINKSTATUS:
-		prism2_info_linkstatus(local, buf, left);
-		break;
-
-	case HFA384X_INFO_SCANRESULTS:
-		prism2_info_scanresults(local, buf, left);
-		break;
-
-	case HFA384X_INFO_HOSTSCANRESULTS:
-		prism2_info_hostscanresults(local, buf, left);
-		break;
-#endif /* PRISM2_NO_STATION_MODES */
-
-#ifndef PRISM2_NO_DEBUG
-	default:
-		PDEBUG(DEBUG_EXTRA, "%s: INFO - len=%d type=0x%04x\n",
-		       local->dev->name, le16_to_cpu(info->len),
-		       le16_to_cpu(info->type));
-		PDEBUG(DEBUG_EXTRA, "Unknown info frame:");
-		for (i = 0; i < (left < 100 ? left : 100); i++)
-			PDEBUG2(DEBUG_EXTRA, " %02x", buf[i]);
-		PDEBUG2(DEBUG_EXTRA, "\n");
-		break;
-#endif /* PRISM2_NO_DEBUG */
-	}
-}
-
-
-#ifndef PRISM2_NO_STATION_MODES
-static void handle_info_queue_linkstatus(local_info_t *local)
-{
-	int val = local->prev_link_status;
-	int connected;
-	union iwreq_data wrqu;
-
-	connected =
-		val == HFA384X_LINKSTATUS_CONNECTED ||
-		val == HFA384X_LINKSTATUS_AP_CHANGE ||
-		val == HFA384X_LINKSTATUS_AP_IN_RANGE;
-
-	if (local->func->get_rid(local->dev, HFA384X_RID_CURRENTBSSID,
-				 local->bssid, ETH_ALEN, 1) < 0) {
-		printk(KERN_DEBUG "%s: could not read CURRENTBSSID after "
-		       "LinkStatus event\n", local->dev->name);
-	} else {
-		PDEBUG(DEBUG_EXTRA, "%s: LinkStatus: BSSID=%pM\n",
-		       local->dev->name,
-		       (unsigned char *) local->bssid);
-		if (local->wds_type & HOSTAP_WDS_AP_CLIENT)
-			hostap_add_sta(local->ap, local->bssid);
-	}
-
-	/* Get BSSID if we have a valid AP address */
-	if (connected) {
-		netif_carrier_on(local->dev);
-		netif_carrier_on(local->ddev);
-		memcpy(wrqu.ap_addr.sa_data, local->bssid, ETH_ALEN);
-	} else {
-		netif_carrier_off(local->dev);
-		netif_carrier_off(local->ddev);
-		eth_zero_addr(wrqu.ap_addr.sa_data);
-	}
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-
-	/*
-	 * Filter out sequential disconnect events in order not to cause a
-	 * flood of SIOCGIWAP events that have a race condition with EAPOL
-	 * frames and can confuse wpa_supplicant about the current association
-	 * status.
-	 */
-	if (connected || local->prev_linkstatus_connected)
-		wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL);
-	local->prev_linkstatus_connected = connected;
-}
-
-
-static void handle_info_queue_scanresults(local_info_t *local)
-{
-	if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA)
-		prism2_host_roaming(local);
-
-	if (local->host_roaming == 2 && local->iw_mode == IW_MODE_INFRA &&
-	    !is_zero_ether_addr(local->preferred_ap)) {
-		/*
-		 * Firmware seems to be getting into odd state in host_roaming
-		 * mode 2 when hostscan is used without join command, so try
-		 * to fix this by re-joining the current AP. This does not
-		 * actually trigger a new association if the current AP is
-		 * still in the scan results.
-		 */
-		prism2_host_roaming(local);
-	}
-}
-
-
-/* Called only as scheduled task after receiving info frames (used to avoid
- * pending too much time in HW IRQ handler). */
-static void handle_info_queue(struct work_struct *work)
-{
-	local_info_t *local = container_of(work, local_info_t, info_queue);
-
-	if (test_and_clear_bit(PRISM2_INFO_PENDING_LINKSTATUS,
-			       &local->pending_info))
-		handle_info_queue_linkstatus(local);
-
-	if (test_and_clear_bit(PRISM2_INFO_PENDING_SCANRESULTS,
-			       &local->pending_info))
-		handle_info_queue_scanresults(local);
-}
-#endif /* PRISM2_NO_STATION_MODES */
-
-
-void hostap_info_init(local_info_t *local)
-{
-	skb_queue_head_init(&local->info_list);
-#ifndef PRISM2_NO_STATION_MODES
-	INIT_WORK(&local->info_queue, handle_info_queue);
-#endif /* PRISM2_NO_STATION_MODES */
-}
-
-
-EXPORT_SYMBOL(hostap_info_init);
-EXPORT_SYMBOL(hostap_info_process);
diff --git a/drivers/net/wireless/intersil/hostap/hostap_ioctl.c b/drivers/net/wireless/intersil/hostap/hostap_ioctl.c
deleted file mode 100644
index 26162f92e3..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_ioctl.c
+++ /dev/null
@@ -1,3847 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */
-
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/sched/signal.h>
-#include <linux/ethtool.h>
-#include <linux/if_arp.h>
-#include <linux/module.h>
-#include <linux/etherdevice.h>
-#include <net/lib80211.h>
-
-#include "hostap_wlan.h"
-#include "hostap.h"
-#include "hostap_ap.h"
-
-static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct iw_statistics *wstats;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* Why are we doing that ? Jean II */
-	if (iface->type != HOSTAP_INTERFACE_MAIN)
-		return NULL;
-
-	wstats = &local->wstats;
-
-	wstats->status = 0;
-	wstats->discard.code =
-		local->comm_tallies.rx_discards_wep_undecryptable;
-	wstats->discard.misc =
-		local->comm_tallies.rx_fcs_errors +
-		local->comm_tallies.rx_discards_no_buffer +
-		local->comm_tallies.tx_discards_wrong_sa;
-
-	wstats->discard.retries =
-		local->comm_tallies.tx_retry_limit_exceeded;
-	wstats->discard.fragment =
-		local->comm_tallies.rx_message_in_bad_msg_fragments;
-
-	if (local->iw_mode != IW_MODE_MASTER &&
-	    local->iw_mode != IW_MODE_REPEAT) {
-
-		if (prism2_update_comms_qual(dev) == 0)
-			wstats->qual.updated = IW_QUAL_ALL_UPDATED |
-				IW_QUAL_DBM;
-
-		wstats->qual.qual = local->comms_qual;
-		wstats->qual.level = local->avg_signal;
-		wstats->qual.noise = local->avg_noise;
-	} else {
-		wstats->qual.qual = 0;
-		wstats->qual.level = 0;
-		wstats->qual.noise = 0;
-		wstats->qual.updated = IW_QUAL_ALL_INVALID;
-	}
-
-	return wstats;
-}
-
-
-static int prism2_get_datarates(struct net_device *dev, u8 *rates)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	u8 buf[12];
-	int len;
-	u16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	len = local->func->get_rid(dev, HFA384X_RID_SUPPORTEDDATARATES, buf,
-				   sizeof(buf), 0);
-	if (len < 2)
-		return 0;
-
-	val = le16_to_cpu(*(__le16 *) buf); /* string length */
-
-	if (len - 2 < val || val > 10)
-		return 0;
-
-	memcpy(rates, buf + 2, val);
-	return val;
-}
-
-
-static int prism2_get_name(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu, char *extra)
-{
-	u8 rates[10];
-	int len, i, over2 = 0;
-
-	len = prism2_get_datarates(dev, rates);
-
-	for (i = 0; i < len; i++) {
-		if (rates[i] == 0x0b || rates[i] == 0x16) {
-			over2 = 1;
-			break;
-		}
-	}
-
-	strcpy(wrqu->name, over2 ? "IEEE 802.11b" : "IEEE 802.11-DS");
-
-	return 0;
-}
-
-
-static int prism2_ioctl_siwencode(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *keybuf)
-{
-	struct iw_point *erq = &wrqu->encoding;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int i;
-	struct lib80211_crypt_data **crypt;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	i = erq->flags & IW_ENCODE_INDEX;
-	if (i < 1 || i > 4)
-		i = local->crypt_info.tx_keyidx;
-	else
-		i--;
-	if (i < 0 || i >= WEP_KEYS)
-		return -EINVAL;
-
-	crypt = &local->crypt_info.crypt[i];
-
-	if (erq->flags & IW_ENCODE_DISABLED) {
-		if (*crypt)
-			lib80211_crypt_delayed_deinit(&local->crypt_info, crypt);
-		goto done;
-	}
-
-	if (*crypt != NULL && (*crypt)->ops != NULL &&
-	    strcmp((*crypt)->ops->name, "WEP") != 0) {
-		/* changing to use WEP; deinit previously used algorithm */
-		lib80211_crypt_delayed_deinit(&local->crypt_info, crypt);
-	}
-
-	if (*crypt == NULL) {
-		struct lib80211_crypt_data *new_crypt;
-
-		/* take WEP into use */
-		new_crypt = kzalloc(sizeof(struct lib80211_crypt_data),
-				GFP_KERNEL);
-		if (new_crypt == NULL)
-			return -ENOMEM;
-		new_crypt->ops = lib80211_get_crypto_ops("WEP");
-		if (!new_crypt->ops) {
-			request_module("lib80211_crypt_wep");
-			new_crypt->ops = lib80211_get_crypto_ops("WEP");
-		}
-		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
-			new_crypt->priv = new_crypt->ops->init(i);
-		if (!new_crypt->ops || !new_crypt->priv) {
-			kfree(new_crypt);
-			new_crypt = NULL;
-
-			printk(KERN_WARNING "%s: could not initialize WEP: "
-			       "load module hostap_crypt_wep.o\n",
-			       dev->name);
-			return -EOPNOTSUPP;
-		}
-		*crypt = new_crypt;
-	}
-
-	if (erq->length > 0) {
-		int len = erq->length <= 5 ? 5 : 13;
-		int first = 1, j;
-		if (len > erq->length)
-			memset(keybuf + erq->length, 0, len - erq->length);
-		(*crypt)->ops->set_key(keybuf, len, NULL, (*crypt)->priv);
-		for (j = 0; j < WEP_KEYS; j++) {
-			if (j != i && local->crypt_info.crypt[j]) {
-				first = 0;
-				break;
-			}
-		}
-		if (first)
-			local->crypt_info.tx_keyidx = i;
-	} else {
-		/* No key data - just set the default TX key index */
-		local->crypt_info.tx_keyidx = i;
-	}
-
- done:
-	local->open_wep = erq->flags & IW_ENCODE_OPEN;
-
-	if (hostap_set_encryption(local)) {
-		printk(KERN_DEBUG "%s: set_encryption failed\n", dev->name);
-		return -EINVAL;
-	}
-
-	/* Do not reset port0 if card is in Managed mode since resetting will
-	 * generate new IEEE 802.11 authentication which may end up in looping
-	 * with IEEE 802.1X. Prism2 documentation seem to require port reset
-	 * after WEP configuration. However, keys are apparently changed at
-	 * least in Managed mode. */
-	if (local->iw_mode != IW_MODE_INFRA && local->func->reset_port(dev)) {
-		printk(KERN_DEBUG "%s: reset_port failed\n", dev->name);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-
-static int prism2_ioctl_giwencode(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *key)
-{
-	struct iw_point *erq = &wrqu->encoding;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int i, len;
-	u16 val;
-	struct lib80211_crypt_data *crypt;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	i = erq->flags & IW_ENCODE_INDEX;
-	if (i < 1 || i > 4)
-		i = local->crypt_info.tx_keyidx;
-	else
-		i--;
-	if (i < 0 || i >= WEP_KEYS)
-		return -EINVAL;
-
-	crypt = local->crypt_info.crypt[i];
-	erq->flags = i + 1;
-
-	if (crypt == NULL || crypt->ops == NULL) {
-		erq->length = 0;
-		erq->flags |= IW_ENCODE_DISABLED;
-		return 0;
-	}
-
-	if (strcmp(crypt->ops->name, "WEP") != 0) {
-		/* only WEP is supported with wireless extensions, so just
-		 * report that encryption is used */
-		erq->length = 0;
-		erq->flags |= IW_ENCODE_ENABLED;
-		return 0;
-	}
-
-	/* Reads from HFA384X_RID_CNFDEFAULTKEY* return bogus values, so show
-	 * the keys from driver buffer */
-	len = crypt->ops->get_key(key, WEP_KEY_LEN, NULL, crypt->priv);
-	erq->length = (len >= 0 ? len : 0);
-
-	if (local->func->get_rid(dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, 1) < 0)
-	{
-		printk("CNFWEPFLAGS reading failed\n");
-		return -EOPNOTSUPP;
-	}
-	le16_to_cpus(&val);
-	if (val & HFA384X_WEPFLAGS_PRIVACYINVOKED)
-		erq->flags |= IW_ENCODE_ENABLED;
-	else
-		erq->flags |= IW_ENCODE_DISABLED;
-	if (val & HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED)
-		erq->flags |= IW_ENCODE_RESTRICTED;
-	else
-		erq->flags |= IW_ENCODE_OPEN;
-
-	return 0;
-}
-
-
-static int hostap_set_rate(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int ret, basic_rates;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	basic_rates = local->basic_rates & local->tx_rate_control;
-	if (!basic_rates || basic_rates != local->basic_rates) {
-		printk(KERN_INFO "%s: updating basic rate set automatically "
-		       "to match with the new supported rate set\n",
-		       dev->name);
-		if (!basic_rates)
-			basic_rates = local->tx_rate_control;
-
-		local->basic_rates = basic_rates;
-		if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES,
-				    basic_rates))
-			printk(KERN_WARNING "%s: failed to set "
-			       "cnfBasicRates\n", dev->name);
-	}
-
-	ret = (hostap_set_word(dev, HFA384X_RID_TXRATECONTROL,
-			       local->tx_rate_control) ||
-	       hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES,
-			       local->tx_rate_control) ||
-	       local->func->reset_port(dev));
-
-	if (ret) {
-		printk(KERN_WARNING "%s: TXRateControl/cnfSupportedRates "
-		       "setting to 0x%x failed\n",
-		       dev->name, local->tx_rate_control);
-	}
-
-	/* Update TX rate configuration for all STAs based on new operational
-	 * rate set. */
-	hostap_update_rates(local);
-
-	return ret;
-}
-
-
-static int prism2_ioctl_siwrate(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rrq = &wrqu->bitrate;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (rrq->fixed) {
-		switch (rrq->value) {
-		case 11000000:
-			local->tx_rate_control = HFA384X_RATES_11MBPS;
-			break;
-		case 5500000:
-			local->tx_rate_control = HFA384X_RATES_5MBPS;
-			break;
-		case 2000000:
-			local->tx_rate_control = HFA384X_RATES_2MBPS;
-			break;
-		case 1000000:
-			local->tx_rate_control = HFA384X_RATES_1MBPS;
-			break;
-		default:
-			local->tx_rate_control = HFA384X_RATES_1MBPS |
-				HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS |
-				HFA384X_RATES_11MBPS;
-			break;
-		}
-	} else {
-		switch (rrq->value) {
-		case 11000000:
-			local->tx_rate_control = HFA384X_RATES_1MBPS |
-				HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS |
-				HFA384X_RATES_11MBPS;
-			break;
-		case 5500000:
-			local->tx_rate_control = HFA384X_RATES_1MBPS |
-				HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS;
-			break;
-		case 2000000:
-			local->tx_rate_control = HFA384X_RATES_1MBPS |
-				HFA384X_RATES_2MBPS;
-			break;
-		case 1000000:
-			local->tx_rate_control = HFA384X_RATES_1MBPS;
-			break;
-		default:
-			local->tx_rate_control = HFA384X_RATES_1MBPS |
-				HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS |
-				HFA384X_RATES_11MBPS;
-			break;
-		}
-	}
-
-	return hostap_set_rate(dev);
-}
-
-
-static int prism2_ioctl_giwrate(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rrq = &wrqu->bitrate;
-	u16 val;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int ret = 0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->func->get_rid(dev, HFA384X_RID_TXRATECONTROL, &val, 2, 1) <
-	    0)
-		return -EINVAL;
-
-	if ((val & 0x1) && (val > 1))
-		rrq->fixed = 0;
-	else
-		rrq->fixed = 1;
-
-	if (local->iw_mode == IW_MODE_MASTER && local->ap != NULL &&
-	    !local->fw_tx_rate_control) {
-		/* HFA384X_RID_CURRENTTXRATE seems to always be 2 Mbps in
-		 * Host AP mode, so use the recorded TX rate of the last sent
-		 * frame */
-		rrq->value = local->ap->last_tx_rate > 0 ?
-			local->ap->last_tx_rate * 100000 : 11000000;
-		return 0;
-	}
-
-	if (local->func->get_rid(dev, HFA384X_RID_CURRENTTXRATE, &val, 2, 1) <
-	    0)
-		return -EINVAL;
-
-	switch (val) {
-	case HFA384X_RATES_1MBPS:
-		rrq->value = 1000000;
-		break;
-	case HFA384X_RATES_2MBPS:
-		rrq->value = 2000000;
-		break;
-	case HFA384X_RATES_5MBPS:
-		rrq->value = 5500000;
-		break;
-	case HFA384X_RATES_11MBPS:
-		rrq->value = 11000000;
-		break;
-	default:
-		/* should not happen */
-		rrq->value = 11000000;
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-
-static int prism2_ioctl_siwsens(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *sens = &wrqu->sens;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* Set the desired AP density */
-	if (sens->value < 1 || sens->value > 3)
-		return -EINVAL;
-
-	if (hostap_set_word(dev, HFA384X_RID_CNFSYSTEMSCALE, sens->value) ||
-	    local->func->reset_port(dev))
-		return -EINVAL;
-
-	return 0;
-}
-
-static int prism2_ioctl_giwsens(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *sens = &wrqu->sens;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	__le16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* Get the current AP density */
-	if (local->func->get_rid(dev, HFA384X_RID_CNFSYSTEMSCALE, &val, 2, 1) <
-	    0)
-		return -EINVAL;
-
-	sens->value = le16_to_cpu(val);
-	sens->fixed = 1;
-
-	return 0;
-}
-
-
-/* Deprecated in new wireless extension API */
-static int prism2_ioctl_giwaplist(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra)
-{
-	struct iw_point *data = &wrqu->data;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct sockaddr *addr;
-	struct iw_quality *qual;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->iw_mode != IW_MODE_MASTER) {
-		printk(KERN_DEBUG "SIOCGIWAPLIST is currently only supported "
-		       "in Host AP mode\n");
-		data->length = 0;
-		return -EOPNOTSUPP;
-	}
-
-	addr = kmalloc_array(IW_MAX_AP, sizeof(struct sockaddr), GFP_KERNEL);
-	qual = kmalloc_array(IW_MAX_AP, sizeof(struct iw_quality), GFP_KERNEL);
-	if (addr == NULL || qual == NULL) {
-		kfree(addr);
-		kfree(qual);
-		data->length = 0;
-		return -ENOMEM;
-	}
-
-	data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1);
-
-	memcpy(extra, addr, sizeof(struct sockaddr) * data->length);
-	data->flags = 1; /* has quality information */
-	memcpy(extra + sizeof(struct sockaddr) * data->length, qual,
-	       sizeof(struct iw_quality) * data->length);
-
-	kfree(addr);
-	kfree(qual);
-	return 0;
-}
-
-
-static int prism2_ioctl_siwrts(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rts = &wrqu->rts;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	__le16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (rts->disabled)
-		val = cpu_to_le16(2347);
-	else if (rts->value < 0 || rts->value > 2347)
-		return -EINVAL;
-	else
-		val = cpu_to_le16(rts->value);
-
-	if (local->func->set_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2) ||
-	    local->func->reset_port(dev))
-		return -EINVAL;
-
-	local->rts_threshold = rts->value;
-
-	return 0;
-}
-
-static int prism2_ioctl_giwrts(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rts = &wrqu->rts;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	__le16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->func->get_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2, 1) <
-	    0)
-		return -EINVAL;
-
-	rts->value = le16_to_cpu(val);
-	rts->disabled = (rts->value == 2347);
-	rts->fixed = 1;
-
-	return 0;
-}
-
-
-static int prism2_ioctl_siwfrag(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rts = &wrqu->rts;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	__le16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (rts->disabled)
-		val = cpu_to_le16(2346);
-	else if (rts->value < 256 || rts->value > 2346)
-		return -EINVAL;
-	else
-		val = cpu_to_le16(rts->value & ~0x1); /* even numbers only */
-
-	local->fragm_threshold = rts->value & ~0x1;
-	if (local->func->set_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, &val,
-				 2)
-	    || local->func->reset_port(dev))
-		return -EINVAL;
-
-	return 0;
-}
-
-static int prism2_ioctl_giwfrag(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rts = &wrqu->rts;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	__le16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->func->get_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD,
-				 &val, 2, 1) < 0)
-		return -EINVAL;
-
-	rts->value = le16_to_cpu(val);
-	rts->disabled = (rts->value == 2346);
-	rts->fixed = 1;
-
-	return 0;
-}
-
-
-#ifndef PRISM2_NO_STATION_MODES
-static int hostap_join_ap(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct hfa384x_join_request req;
-	unsigned long flags;
-	int i;
-	struct hfa384x_hostscan_result *entry;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	memcpy(req.bssid, local->preferred_ap, ETH_ALEN);
-	req.channel = 0;
-
-	spin_lock_irqsave(&local->lock, flags);
-	for (i = 0; i < local->last_scan_results_count; i++) {
-		if (!local->last_scan_results)
-			break;
-		entry = &local->last_scan_results[i];
-		if (ether_addr_equal(local->preferred_ap, entry->bssid)) {
-			req.channel = entry->chid;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&local->lock, flags);
-
-	if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req,
-				 sizeof(req))) {
-		printk(KERN_DEBUG "%s: JoinRequest %pM failed\n",
-		       dev->name, local->preferred_ap);
-		return -1;
-	}
-
-	printk(KERN_DEBUG "%s: Trying to join BSSID %pM\n",
-	       dev->name, local->preferred_ap);
-
-	return 0;
-}
-#endif /* PRISM2_NO_STATION_MODES */
-
-
-static int prism2_ioctl_siwap(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct sockaddr *ap_addr = &wrqu->ap_addr;
-#ifdef PRISM2_NO_STATION_MODES
-	return -EOPNOTSUPP;
-#else /* PRISM2_NO_STATION_MODES */
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	memcpy(local->preferred_ap, &ap_addr->sa_data, ETH_ALEN);
-
-	if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA) {
-		struct hfa384x_scan_request scan_req;
-		memset(&scan_req, 0, sizeof(scan_req));
-		scan_req.channel_list = cpu_to_le16(0x3fff);
-		scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS);
-		if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST,
-					 &scan_req, sizeof(scan_req))) {
-			printk(KERN_DEBUG "%s: ScanResults request failed - "
-			       "preferred AP delayed to next unsolicited "
-			       "scan\n", dev->name);
-		}
-	} else if (local->host_roaming == 2 &&
-		   local->iw_mode == IW_MODE_INFRA) {
-		if (hostap_join_ap(dev))
-			return -EINVAL;
-	} else {
-		printk(KERN_DEBUG "%s: Preferred AP (SIOCSIWAP) is used only "
-		       "in Managed mode when host_roaming is enabled\n",
-		       dev->name);
-	}
-
-	return 0;
-#endif /* PRISM2_NO_STATION_MODES */
-}
-
-static int prism2_ioctl_giwap(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct sockaddr *ap_addr = &wrqu->ap_addr;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	ap_addr->sa_family = ARPHRD_ETHER;
-	switch (iface->type) {
-	case HOSTAP_INTERFACE_AP:
-		memcpy(&ap_addr->sa_data, dev->dev_addr, ETH_ALEN);
-		break;
-	case HOSTAP_INTERFACE_STA:
-		memcpy(&ap_addr->sa_data, local->assoc_ap_addr, ETH_ALEN);
-		break;
-	case HOSTAP_INTERFACE_WDS:
-		memcpy(&ap_addr->sa_data, iface->u.wds.remote_addr, ETH_ALEN);
-		break;
-	default:
-		if (local->func->get_rid(dev, HFA384X_RID_CURRENTBSSID,
-					 &ap_addr->sa_data, ETH_ALEN, 1) < 0)
-			return -EOPNOTSUPP;
-
-		/* local->bssid is also updated in LinkStatus handler when in
-		 * station mode */
-		memcpy(local->bssid, &ap_addr->sa_data, ETH_ALEN);
-		break;
-	}
-
-	return 0;
-}
-
-
-static int prism2_ioctl_siwnickn(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *nickname)
-{
-	struct iw_point *data = &wrqu->data;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	memset(local->name, 0, sizeof(local->name));
-	memcpy(local->name, nickname, data->length);
-	local->name_set = 1;
-
-	if (hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, local->name) ||
-	    local->func->reset_port(dev))
-		return -EINVAL;
-
-	return 0;
-}
-
-static int prism2_ioctl_giwnickn(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *nickname)
-{
-	struct iw_point *data = &wrqu->data;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int len;
-	char name[MAX_NAME_LEN + 3];
-	u16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	len = local->func->get_rid(dev, HFA384X_RID_CNFOWNNAME,
-				   &name, MAX_NAME_LEN + 2, 0);
-	val = le16_to_cpu(*(__le16 *) name);
-	if (len > MAX_NAME_LEN + 2 || len < 0 || val > MAX_NAME_LEN)
-		return -EOPNOTSUPP;
-
-	name[val + 2] = '\0';
-	data->length = val + 1;
-	memcpy(nickname, name + 2, val + 1);
-
-	return 0;
-}
-
-
-static int prism2_ioctl_siwfreq(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_freq *freq = &wrqu->freq;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* freq => chan. */
-	if (freq->e == 1 &&
-	    freq->m / 100000 >= freq_list[0] &&
-	    freq->m / 100000 <= freq_list[FREQ_COUNT - 1]) {
-		int ch;
-		int fr = freq->m / 100000;
-		for (ch = 0; ch < FREQ_COUNT; ch++) {
-			if (fr == freq_list[ch]) {
-				freq->e = 0;
-				freq->m = ch + 1;
-				break;
-			}
-		}
-	}
-
-	if (freq->e != 0 || freq->m < 1 || freq->m > FREQ_COUNT ||
-	    !(local->channel_mask & (1 << (freq->m - 1))))
-		return -EINVAL;
-
-	local->channel = freq->m; /* channel is used in prism2_setup_rids() */
-	if (hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel) ||
-	    local->func->reset_port(dev))
-		return -EINVAL;
-
-	return 0;
-}
-
-static int prism2_ioctl_giwfreq(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_freq *freq = &wrqu->freq;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	u16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->func->get_rid(dev, HFA384X_RID_CURRENTCHANNEL, &val, 2, 1) <
-	    0)
-		return -EINVAL;
-
-	le16_to_cpus(&val);
-	if (val < 1 || val > FREQ_COUNT)
-		return -EINVAL;
-
-	freq->m = freq_list[val - 1] * 100000;
-	freq->e = 1;
-
-	return 0;
-}
-
-
-static void hostap_monitor_set_type(local_info_t *local)
-{
-	struct net_device *dev = local->ddev;
-
-	if (dev == NULL)
-		return;
-
-	if (local->monitor_type == PRISM2_MONITOR_PRISM ||
-	    local->monitor_type == PRISM2_MONITOR_CAPHDR) {
-		dev->type = ARPHRD_IEEE80211_PRISM;
-	} else if (local->monitor_type == PRISM2_MONITOR_RADIOTAP) {
-		dev->type = ARPHRD_IEEE80211_RADIOTAP;
-	} else {
-		dev->type = ARPHRD_IEEE80211;
-	}
-}
-
-
-static int prism2_ioctl_siwessid(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *ssid)
-{
-	struct iw_point *data = &wrqu->data;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (iface->type == HOSTAP_INTERFACE_WDS)
-		return -EOPNOTSUPP;
-
-	if (data->flags == 0)
-		ssid[0] = '\0'; /* ANY */
-
-	if (local->iw_mode == IW_MODE_MASTER && ssid[0] == '\0') {
-		/* Setting SSID to empty string seems to kill the card in
-		 * Host AP mode */
-		printk(KERN_DEBUG "%s: Host AP mode does not support "
-		       "'Any' essid\n", dev->name);
-		return -EINVAL;
-	}
-
-	memcpy(local->essid, ssid, data->length);
-	local->essid[data->length] = '\0';
-
-	if ((!local->fw_ap &&
-	     hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, local->essid))
-	    || hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, local->essid) ||
-	    local->func->reset_port(dev))
-		return -EINVAL;
-
-	return 0;
-}
-
-static int prism2_ioctl_giwessid(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *essid)
-{
-	struct iw_point *data = &wrqu->data;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	u16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (iface->type == HOSTAP_INTERFACE_WDS)
-		return -EOPNOTSUPP;
-
-	data->flags = 1; /* active */
-	if (local->iw_mode == IW_MODE_MASTER) {
-		data->length = strlen(local->essid);
-		memcpy(essid, local->essid, IW_ESSID_MAX_SIZE);
-	} else {
-		int len;
-		char ssid[MAX_SSID_LEN + 2];
-		memset(ssid, 0, sizeof(ssid));
-		len = local->func->get_rid(dev, HFA384X_RID_CURRENTSSID,
-					   &ssid, MAX_SSID_LEN + 2, 0);
-		val = le16_to_cpu(*(__le16 *) ssid);
-		if (len > MAX_SSID_LEN + 2 || len < 0 || val > MAX_SSID_LEN) {
-			return -EOPNOTSUPP;
-		}
-		data->length = val;
-		memcpy(essid, ssid + 2, IW_ESSID_MAX_SIZE);
-	}
-
-	return 0;
-}
-
-
-static int prism2_ioctl_giwrange(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct iw_point *data = &wrqu->data;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct iw_range *range = (struct iw_range *) extra;
-	u8 rates[10];
-	u16 val;
-	int i, len, over2;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	data->length = sizeof(struct iw_range);
-	memset(range, 0, sizeof(struct iw_range));
-
-	/* TODO: could fill num_txpower and txpower array with
-	 * something; however, there are 128 different values.. */
-
-	range->txpower_capa = IW_TXPOW_DBM;
-
-	if (local->iw_mode == IW_MODE_INFRA || local->iw_mode == IW_MODE_ADHOC)
-	{
-		range->min_pmp = 1 * 1024;
-		range->max_pmp = 65535 * 1024;
-		range->min_pmt = 1 * 1024;
-		range->max_pmt = 1000 * 1024;
-		range->pmp_flags = IW_POWER_PERIOD;
-		range->pmt_flags = IW_POWER_TIMEOUT;
-		range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT |
-			IW_POWER_UNICAST_R | IW_POWER_ALL_R;
-	}
-
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 18;
-
-	range->retry_capa = IW_RETRY_LIMIT;
-	range->retry_flags = IW_RETRY_LIMIT;
-	range->min_retry = 0;
-	range->max_retry = 255;
-
-	range->num_channels = FREQ_COUNT;
-
-	val = 0;
-	for (i = 0; i < FREQ_COUNT; i++) {
-		if (local->channel_mask & (1 << i)) {
-			range->freq[val].i = i + 1;
-			range->freq[val].m = freq_list[i] * 100000;
-			range->freq[val].e = 1;
-			val++;
-		}
-		if (val == IW_MAX_FREQUENCIES)
-			break;
-	}
-	range->num_frequency = val;
-
-	if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) {
-		range->max_qual.qual = 70; /* what is correct max? This was not
-					    * documented exactly. At least
-					    * 69 has been observed. */
-		range->max_qual.level = 0; /* dB */
-		range->max_qual.noise = 0; /* dB */
-
-		/* What would be suitable values for "average/typical" qual? */
-		range->avg_qual.qual = 20;
-		range->avg_qual.level = -60;
-		range->avg_qual.noise = -95;
-	} else {
-		range->max_qual.qual = 92; /* 0 .. 92 */
-		range->max_qual.level = 154; /* 27 .. 154 */
-		range->max_qual.noise = 154; /* 27 .. 154 */
-	}
-	range->sensitivity = 3;
-
-	range->max_encoding_tokens = WEP_KEYS;
-	range->num_encoding_sizes = 2;
-	range->encoding_size[0] = 5;
-	range->encoding_size[1] = 13;
-
-	over2 = 0;
-	len = prism2_get_datarates(dev, rates);
-	range->num_bitrates = 0;
-	for (i = 0; i < len; i++) {
-		if (range->num_bitrates < IW_MAX_BITRATES) {
-			range->bitrate[range->num_bitrates] =
-				rates[i] * 500000;
-			range->num_bitrates++;
-		}
-		if (rates[i] == 0x0b || rates[i] == 0x16)
-			over2 = 1;
-	}
-	/* estimated maximum TCP throughput values (bps) */
-	range->throughput = over2 ? 5500000 : 1500000;
-
-	range->min_rts = 0;
-	range->max_rts = 2347;
-	range->min_frag = 256;
-	range->max_frag = 2346;
-
-	/* Event capability (kernel + driver) */
-	range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
-				IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) |
-				IW_EVENT_CAPA_MASK(SIOCGIWAP) |
-				IW_EVENT_CAPA_MASK(SIOCGIWSCAN));
-	range->event_capa[1] = IW_EVENT_CAPA_K_1;
-	range->event_capa[4] = (IW_EVENT_CAPA_MASK(IWEVTXDROP) |
-				IW_EVENT_CAPA_MASK(IWEVCUSTOM) |
-				IW_EVENT_CAPA_MASK(IWEVREGISTERED) |
-				IW_EVENT_CAPA_MASK(IWEVEXPIRED));
-
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-		IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-
-	if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1))
-		range->scan_capa = IW_SCAN_CAPA_ESSID;
-
-	return 0;
-}
-
-
-static int hostap_monitor_mode_enable(local_info_t *local)
-{
-	struct net_device *dev = local->dev;
-
-	printk(KERN_DEBUG "Enabling monitor mode\n");
-	hostap_monitor_set_type(local);
-
-	if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
-			    HFA384X_PORTTYPE_PSEUDO_IBSS)) {
-		printk(KERN_DEBUG "Port type setting for monitor mode "
-		       "failed\n");
-		return -EOPNOTSUPP;
-	}
-
-	/* Host decrypt is needed to get the IV and ICV fields;
-	 * however, monitor mode seems to remove WEP flag from frame
-	 * control field */
-	if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
-			    HFA384X_WEPFLAGS_HOSTENCRYPT |
-			    HFA384X_WEPFLAGS_HOSTDECRYPT)) {
-		printk(KERN_DEBUG "WEP flags setting failed\n");
-		return -EOPNOTSUPP;
-	}
-
-	if (local->func->reset_port(dev) ||
-	    local->func->cmd(dev, HFA384X_CMDCODE_TEST |
-			     (HFA384X_TEST_MONITOR << 8),
-			     0, NULL, NULL)) {
-		printk(KERN_DEBUG "Setting monitor mode failed\n");
-		return -EOPNOTSUPP;
-	}
-
-	return 0;
-}
-
-
-static int hostap_monitor_mode_disable(local_info_t *local)
-{
-	struct net_device *dev = local->ddev;
-
-	if (dev == NULL)
-		return -1;
-
-	printk(KERN_DEBUG "%s: Disabling monitor mode\n", dev->name);
-	dev->type = ARPHRD_ETHER;
-
-	if (local->func->cmd(dev, HFA384X_CMDCODE_TEST |
-			     (HFA384X_TEST_STOP << 8),
-			     0, NULL, NULL))
-		return -1;
-	return hostap_set_encryption(local);
-}
-
-
-static int prism2_ioctl_siwmode(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	__u32 *mode = &wrqu->mode;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int double_reset = 0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (*mode != IW_MODE_ADHOC && *mode != IW_MODE_INFRA &&
-	    *mode != IW_MODE_MASTER && *mode != IW_MODE_REPEAT &&
-	    *mode != IW_MODE_MONITOR)
-		return -EOPNOTSUPP;
-
-#ifdef PRISM2_NO_STATION_MODES
-	if (*mode == IW_MODE_ADHOC || *mode == IW_MODE_INFRA)
-		return -EOPNOTSUPP;
-#endif /* PRISM2_NO_STATION_MODES */
-
-	if (*mode == local->iw_mode)
-		return 0;
-
-	if (*mode == IW_MODE_MASTER && local->essid[0] == '\0') {
-		printk(KERN_WARNING "%s: empty SSID not allowed in Master "
-		       "mode\n", dev->name);
-		return -EINVAL;
-	}
-
-	if (local->iw_mode == IW_MODE_MONITOR)
-		hostap_monitor_mode_disable(local);
-
-	if ((local->iw_mode == IW_MODE_ADHOC ||
-	     local->iw_mode == IW_MODE_MONITOR) && *mode == IW_MODE_MASTER) {
-		/* There seems to be a firmware bug in at least STA f/w v1.5.6
-		 * that leaves beacon frames to use IBSS type when moving from
-		 * IBSS to Host AP mode. Doing double Port0 reset seems to be
-		 * enough to workaround this. */
-		double_reset = 1;
-	}
-
-	printk(KERN_DEBUG "prism2: %s: operating mode changed "
-	       "%d -> %d\n", dev->name, local->iw_mode, *mode);
-	local->iw_mode = *mode;
-
-	if (local->iw_mode == IW_MODE_MONITOR)
-		hostap_monitor_mode_enable(local);
-	else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt &&
-		 !local->fw_encrypt_ok) {
-		printk(KERN_DEBUG "%s: defaulting to host-based encryption as "
-		       "a workaround for firmware bug in Host AP mode WEP\n",
-		       dev->name);
-		local->host_encrypt = 1;
-	}
-
-	if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
-			    hostap_get_porttype(local)))
-		return -EOPNOTSUPP;
-
-	if (local->func->reset_port(dev))
-		return -EINVAL;
-	if (double_reset && local->func->reset_port(dev))
-		return -EINVAL;
-
-	if (local->iw_mode != IW_MODE_INFRA && local->iw_mode != IW_MODE_ADHOC)
-	{
-		/* netif_carrier is used only in client modes for now, so make
-		 * sure carrier is on when moving to non-client modes. */
-		netif_carrier_on(local->dev);
-		netif_carrier_on(local->ddev);
-	}
-	return 0;
-}
-
-
-static int prism2_ioctl_giwmode(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	__u32 *mode = &wrqu->mode;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	switch (iface->type) {
-	case HOSTAP_INTERFACE_STA:
-		*mode = IW_MODE_INFRA;
-		break;
-	case HOSTAP_INTERFACE_WDS:
-		*mode = IW_MODE_REPEAT;
-		break;
-	default:
-		*mode = local->iw_mode;
-		break;
-	}
-	return 0;
-}
-
-
-static int prism2_ioctl_siwpower(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *wrq = &wrqu->power;
-#ifdef PRISM2_NO_STATION_MODES
-	return -EOPNOTSUPP;
-#else /* PRISM2_NO_STATION_MODES */
-	int ret = 0;
-
-	if (wrq->disabled)
-		return hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 0);
-
-	switch (wrq->flags & IW_POWER_MODE) {
-	case IW_POWER_UNICAST_R:
-		ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 0);
-		if (ret)
-			return ret;
-		ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1);
-		if (ret)
-			return ret;
-		break;
-	case IW_POWER_ALL_R:
-		ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 1);
-		if (ret)
-			return ret;
-		ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1);
-		if (ret)
-			return ret;
-		break;
-	case IW_POWER_ON:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (wrq->flags & IW_POWER_TIMEOUT) {
-		ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1);
-		if (ret)
-			return ret;
-		ret = hostap_set_word(dev, HFA384X_RID_CNFPMHOLDOVERDURATION,
-				      wrq->value / 1024);
-		if (ret)
-			return ret;
-	}
-	if (wrq->flags & IW_POWER_PERIOD) {
-		ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1);
-		if (ret)
-			return ret;
-		ret = hostap_set_word(dev, HFA384X_RID_CNFMAXSLEEPDURATION,
-				      wrq->value / 1024);
-		if (ret)
-			return ret;
-	}
-
-	return ret;
-#endif /* PRISM2_NO_STATION_MODES */
-}
-
-
-static int prism2_ioctl_giwpower(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rrq = &wrqu->power;
-#ifdef PRISM2_NO_STATION_MODES
-	return -EOPNOTSUPP;
-#else /* PRISM2_NO_STATION_MODES */
-	struct hostap_interface *iface;
-	local_info_t *local;
-	__le16 enable, mcast;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->func->get_rid(dev, HFA384X_RID_CNFPMENABLED, &enable, 2, 1)
-	    < 0)
-		return -EINVAL;
-
-	if (!le16_to_cpu(enable)) {
-		rrq->disabled = 1;
-		return 0;
-	}
-
-	rrq->disabled = 0;
-
-	if ((rrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
-		__le16 timeout;
-		if (local->func->get_rid(dev,
-					 HFA384X_RID_CNFPMHOLDOVERDURATION,
-					 &timeout, 2, 1) < 0)
-			return -EINVAL;
-
-		rrq->flags = IW_POWER_TIMEOUT;
-		rrq->value = le16_to_cpu(timeout) * 1024;
-	} else {
-		__le16 period;
-		if (local->func->get_rid(dev, HFA384X_RID_CNFMAXSLEEPDURATION,
-					 &period, 2, 1) < 0)
-			return -EINVAL;
-
-		rrq->flags = IW_POWER_PERIOD;
-		rrq->value = le16_to_cpu(period) * 1024;
-	}
-
-	if (local->func->get_rid(dev, HFA384X_RID_CNFMULTICASTRECEIVE, &mcast,
-				 2, 1) < 0)
-		return -EINVAL;
-
-	if (le16_to_cpu(mcast))
-		rrq->flags |= IW_POWER_ALL_R;
-	else
-		rrq->flags |= IW_POWER_UNICAST_R;
-
-	return 0;
-#endif /* PRISM2_NO_STATION_MODES */
-}
-
-
-static int prism2_ioctl_siwretry(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rrq = &wrqu->retry;
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (rrq->disabled)
-		return -EINVAL;
-
-	/* setting retry limits is not supported with the current station
-	 * firmware code; simulate this with alternative retry count for now */
-	if (rrq->flags == IW_RETRY_LIMIT) {
-		if (rrq->value < 0) {
-			/* disable manual retry count setting and use firmware
-			 * defaults */
-			local->manual_retry_count = -1;
-			local->tx_control &= ~HFA384X_TX_CTRL_ALT_RTRY;
-		} else {
-			if (hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT,
-					    rrq->value)) {
-				printk(KERN_DEBUG "%s: Alternate retry count "
-				       "setting to %d failed\n",
-				       dev->name, rrq->value);
-				return -EOPNOTSUPP;
-			}
-
-			local->manual_retry_count = rrq->value;
-			local->tx_control |= HFA384X_TX_CTRL_ALT_RTRY;
-		}
-		return 0;
-	}
-
-	return -EOPNOTSUPP;
-
-#if 0
-	/* what could be done, if firmware would support this.. */
-
-	if (rrq->flags & IW_RETRY_LIMIT) {
-		if (rrq->flags & IW_RETRY_LONG)
-			HFA384X_RID_LONGRETRYLIMIT = rrq->value;
-		else if (rrq->flags & IW_RETRY_SHORT)
-			HFA384X_RID_SHORTRETRYLIMIT = rrq->value;
-		else {
-			HFA384X_RID_LONGRETRYLIMIT = rrq->value;
-			HFA384X_RID_SHORTRETRYLIMIT = rrq->value;
-		}
-
-	}
-
-	if (rrq->flags & IW_RETRY_LIFETIME) {
-		HFA384X_RID_MAXTRANSMITLIFETIME = rrq->value / 1024;
-	}
-
-	return 0;
-#endif /* 0 */
-}
-
-static int prism2_ioctl_giwretry(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rrq = &wrqu->retry;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	__le16 shortretry, longretry, lifetime, altretry;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->func->get_rid(dev, HFA384X_RID_SHORTRETRYLIMIT, &shortretry,
-				 2, 1) < 0 ||
-	    local->func->get_rid(dev, HFA384X_RID_LONGRETRYLIMIT, &longretry,
-				 2, 1) < 0 ||
-	    local->func->get_rid(dev, HFA384X_RID_MAXTRANSMITLIFETIME,
-				 &lifetime, 2, 1) < 0)
-		return -EINVAL;
-
-	rrq->disabled = 0;
-
-	if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
-		rrq->flags = IW_RETRY_LIFETIME;
-		rrq->value = le16_to_cpu(lifetime) * 1024;
-	} else {
-		if (local->manual_retry_count >= 0) {
-			rrq->flags = IW_RETRY_LIMIT;
-			if (local->func->get_rid(dev,
-						 HFA384X_RID_CNFALTRETRYCOUNT,
-						 &altretry, 2, 1) >= 0)
-				rrq->value = le16_to_cpu(altretry);
-			else
-				rrq->value = local->manual_retry_count;
-		} else if ((rrq->flags & IW_RETRY_LONG)) {
-			rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
-			rrq->value = le16_to_cpu(longretry);
-		} else {
-			rrq->flags = IW_RETRY_LIMIT;
-			rrq->value = le16_to_cpu(shortretry);
-			if (shortretry != longretry)
-				rrq->flags |= IW_RETRY_SHORT;
-		}
-	}
-	return 0;
-}
-
-
-/* Note! This TX power controlling is experimental and should not be used in
- * production use. It just sets raw power register and does not use any kind of
- * feedback information from the measured TX power (CR58). This is now
- * commented out to make sure that it is not used by accident. TX power
- * configuration will be enabled again after proper algorithm using feedback
- * has been implemented. */
-
-#ifdef RAW_TXPOWER_SETTING
-/* Map HFA386x's CR31 to and from dBm with some sort of ad hoc mapping..
- * This version assumes following mapping:
- * CR31 is 7-bit value with -64 to +63 range.
- * -64 is mapped into +20dBm and +63 into -43dBm.
- * This is certainly not an exact mapping for every card, but at least
- * increasing dBm value should correspond to increasing TX power.
- */
-
-static int prism2_txpower_hfa386x_to_dBm(u16 val)
-{
-	signed char tmp;
-
-	if (val > 255)
-		val = 255;
-
-	tmp = val;
-	tmp >>= 2;
-
-	return -12 - tmp;
-}
-
-static u16 prism2_txpower_dBm_to_hfa386x(int val)
-{
-	signed char tmp;
-
-	if (val > 20)
-		return 128;
-	else if (val < -43)
-		return 127;
-
-	tmp = val;
-	tmp = -12 - tmp;
-	tmp <<= 2;
-
-	return (unsigned char) tmp;
-}
-#endif /* RAW_TXPOWER_SETTING */
-
-
-static int prism2_ioctl_siwtxpow(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *rrq = &wrqu->txpower;
-	struct hostap_interface *iface;
-	local_info_t *local;
-#ifdef RAW_TXPOWER_SETTING
-	char *tmp;
-#endif
-	u16 val;
-	int ret = 0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (rrq->disabled) {
-		if (local->txpower_type != PRISM2_TXPOWER_OFF) {
-			val = 0xff; /* use all standby and sleep modes */
-			ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
-					       HFA386X_CR_A_D_TEST_MODES2,
-					       &val, NULL);
-			printk(KERN_DEBUG "%s: Turning radio off: %s\n",
-			       dev->name, ret ? "failed" : "OK");
-			local->txpower_type = PRISM2_TXPOWER_OFF;
-		}
-		return (ret ? -EOPNOTSUPP : 0);
-	}
-
-	if (local->txpower_type == PRISM2_TXPOWER_OFF) {
-		val = 0; /* disable all standby and sleep modes */
-		ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
-				       HFA386X_CR_A_D_TEST_MODES2, &val, NULL);
-		printk(KERN_DEBUG "%s: Turning radio on: %s\n",
-		       dev->name, ret ? "failed" : "OK");
-		local->txpower_type = PRISM2_TXPOWER_UNKNOWN;
-	}
-
-#ifdef RAW_TXPOWER_SETTING
-	if (!rrq->fixed && local->txpower_type != PRISM2_TXPOWER_AUTO) {
-		printk(KERN_DEBUG "Setting ALC on\n");
-		val = HFA384X_TEST_CFG_BIT_ALC;
-		local->func->cmd(dev, HFA384X_CMDCODE_TEST |
-				 (HFA384X_TEST_CFG_BITS << 8), 1, &val, NULL);
-		local->txpower_type = PRISM2_TXPOWER_AUTO;
-		return 0;
-	}
-
-	if (local->txpower_type != PRISM2_TXPOWER_FIXED) {
-		printk(KERN_DEBUG "Setting ALC off\n");
-		val = HFA384X_TEST_CFG_BIT_ALC;
-		local->func->cmd(dev, HFA384X_CMDCODE_TEST |
-				 (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
-			local->txpower_type = PRISM2_TXPOWER_FIXED;
-	}
-
-	if (rrq->flags == IW_TXPOW_DBM)
-		tmp = "dBm";
-	else if (rrq->flags == IW_TXPOW_MWATT)
-		tmp = "mW";
-	else
-		tmp = "UNKNOWN";
-	printk(KERN_DEBUG "Setting TX power to %d %s\n", rrq->value, tmp);
-
-	if (rrq->flags != IW_TXPOW_DBM) {
-		printk("SIOCSIWTXPOW with mW is not supported; use dBm\n");
-		return -EOPNOTSUPP;
-	}
-
-	local->txpower = rrq->value;
-	val = prism2_txpower_dBm_to_hfa386x(local->txpower);
-	if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
-			     HFA386X_CR_MANUAL_TX_POWER, &val, NULL))
-		ret = -EOPNOTSUPP;
-#else /* RAW_TXPOWER_SETTING */
-	if (rrq->fixed)
-		ret = -EOPNOTSUPP;
-#endif /* RAW_TXPOWER_SETTING */
-
-	return ret;
-}
-
-static int prism2_ioctl_giwtxpow(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-#ifdef RAW_TXPOWER_SETTING
-	struct iw_param *rrq = &wrqu->txpower;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	u16 resp0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	rrq->flags = IW_TXPOW_DBM;
-	rrq->disabled = 0;
-	rrq->fixed = 0;
-
-	if (local->txpower_type == PRISM2_TXPOWER_AUTO) {
-		if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF,
-				     HFA386X_CR_MANUAL_TX_POWER,
-				     NULL, &resp0) == 0) {
-			rrq->value = prism2_txpower_hfa386x_to_dBm(resp0);
-		} else {
-			/* Could not get real txpower; guess 15 dBm */
-			rrq->value = 15;
-		}
-	} else if (local->txpower_type == PRISM2_TXPOWER_OFF) {
-		rrq->value = 0;
-		rrq->disabled = 1;
-	} else if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
-		rrq->value = local->txpower;
-		rrq->fixed = 1;
-	} else {
-		printk("SIOCGIWTXPOW - unknown txpower_type=%d\n",
-		       local->txpower_type);
-	}
-	return 0;
-#else /* RAW_TXPOWER_SETTING */
-	return -EOPNOTSUPP;
-#endif /* RAW_TXPOWER_SETTING */
-}
-
-
-#ifndef PRISM2_NO_STATION_MODES
-
-/* HostScan request works with and without host_roaming mode. In addition, it
- * does not break current association. However, it requires newer station
- * firmware version (>= 1.3.1) than scan request. */
-static int prism2_request_hostscan(struct net_device *dev,
-				   u8 *ssid, u8 ssid_len)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct hfa384x_hostscan_request scan_req;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	memset(&scan_req, 0, sizeof(scan_req));
-	scan_req.channel_list = cpu_to_le16(local->channel_mask &
-					    local->scan_channel_mask);
-	scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS);
-	if (ssid) {
-		if (ssid_len > 32)
-			return -EINVAL;
-		scan_req.target_ssid_len = cpu_to_le16(ssid_len);
-		memcpy(scan_req.target_ssid, ssid, ssid_len);
-	}
-
-	if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req,
-				 sizeof(scan_req))) {
-		printk(KERN_DEBUG "%s: HOSTSCAN failed\n", dev->name);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-
-static int prism2_request_scan(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct hfa384x_scan_request scan_req;
-	int ret = 0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	memset(&scan_req, 0, sizeof(scan_req));
-	scan_req.channel_list = cpu_to_le16(local->channel_mask &
-					    local->scan_channel_mask);
-	scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS);
-
-	/* FIX:
-	 * It seems to be enough to set roaming mode for a short moment to
-	 * host-based and then setup scanrequest data and return the mode to
-	 * firmware-based.
-	 *
-	 * Master mode would need to drop to Managed mode for a short while
-	 * to make scanning work.. Or sweep through the different channels and
-	 * use passive scan based on beacons. */
-
-	if (!local->host_roaming)
-		hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE,
-				HFA384X_ROAMING_HOST);
-
-	if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, &scan_req,
-				 sizeof(scan_req))) {
-		printk(KERN_DEBUG "SCANREQUEST failed\n");
-		ret = -EINVAL;
-	}
-
-	if (!local->host_roaming)
-		hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE,
-				HFA384X_ROAMING_FIRMWARE);
-
-	return ret;
-}
-
-#else /* !PRISM2_NO_STATION_MODES */
-
-static inline int prism2_request_hostscan(struct net_device *dev,
-					  u8 *ssid, u8 ssid_len)
-{
-	return -EOPNOTSUPP;
-}
-
-
-static inline int prism2_request_scan(struct net_device *dev)
-{
-	return -EOPNOTSUPP;
-}
-
-#endif /* !PRISM2_NO_STATION_MODES */
-
-
-static int prism2_ioctl_siwscan(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_point *data = &wrqu->data;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int ret;
-	u8 *ssid = NULL, ssid_len = 0;
-	struct iw_scan_req *req = (struct iw_scan_req *) extra;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (data->length < sizeof(struct iw_scan_req))
-		req = NULL;
-
-	if (local->iw_mode == IW_MODE_MASTER) {
-		/* In master mode, we just return the results of our local
-		 * tables, so we don't need to start anything...
-		 * Jean II */
-		data->length = 0;
-		return 0;
-	}
-
-	if (!local->dev_enabled)
-		return -ENETDOWN;
-
-	if (req && data->flags & IW_SCAN_THIS_ESSID) {
-		ssid = req->essid;
-		ssid_len = req->essid_len;
-
-		if (ssid_len &&
-		    ((local->iw_mode != IW_MODE_INFRA &&
-		      local->iw_mode != IW_MODE_ADHOC) ||
-		     (local->sta_fw_ver < PRISM2_FW_VER(1,3,1))))
-			return -EOPNOTSUPP;
-	}
-
-	if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1))
-		ret = prism2_request_hostscan(dev, ssid, ssid_len);
-	else
-		ret = prism2_request_scan(dev);
-
-	if (ret == 0)
-		local->scan_timestamp = jiffies;
-
-	/* Could inquire F101, F103 or wait for SIOCGIWSCAN and read RID */
-
-	return ret;
-}
-
-
-#ifndef PRISM2_NO_STATION_MODES
-static char * __prism2_translate_scan(local_info_t *local,
-				      struct iw_request_info *info,
-				      struct hfa384x_hostscan_result *scan,
-				      struct hostap_bss_info *bss,
-				      char *current_ev, char *end_buf)
-{
-	int i, chan;
-	struct iw_event iwe;
-	char *current_val;
-	u16 capabilities;
-	u8 *pos;
-	u8 *ssid, *bssid;
-	size_t ssid_len;
-	char *buf;
-
-	if (bss) {
-		ssid = bss->ssid;
-		ssid_len = bss->ssid_len;
-		bssid = bss->bssid;
-	} else {
-		ssid = scan->ssid;
-		ssid_len = le16_to_cpu(scan->ssid_len);
-		bssid = scan->bssid;
-	}
-	if (ssid_len > 32)
-		ssid_len = 32;
-
-	/* First entry *MUST* be the AP MAC address */
-	memset(&iwe, 0, sizeof(iwe));
-	iwe.cmd = SIOCGIWAP;
-	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-	memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN);
-	current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe,
-					  IW_EV_ADDR_LEN);
-
-	/* Other entries will be displayed in the order we give them */
-
-	memset(&iwe, 0, sizeof(iwe));
-	iwe.cmd = SIOCGIWESSID;
-	iwe.u.data.length = ssid_len;
-	iwe.u.data.flags = 1;
-	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
-					  &iwe, ssid);
-
-	memset(&iwe, 0, sizeof(iwe));
-	iwe.cmd = SIOCGIWMODE;
-	if (bss) {
-		capabilities = bss->capab_info;
-	} else {
-		capabilities = le16_to_cpu(scan->capability);
-	}
-	if (capabilities & (WLAN_CAPABILITY_ESS |
-			    WLAN_CAPABILITY_IBSS)) {
-		if (capabilities & WLAN_CAPABILITY_ESS)
-			iwe.u.mode = IW_MODE_MASTER;
-		else
-			iwe.u.mode = IW_MODE_ADHOC;
-		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-						  &iwe, IW_EV_UINT_LEN);
-	}
-
-	memset(&iwe, 0, sizeof(iwe));
-	iwe.cmd = SIOCGIWFREQ;
-	if (scan) {
-		chan = le16_to_cpu(scan->chid);
-	} else if (bss) {
-		chan = bss->chan;
-	} else {
-		chan = 0;
-	}
-
-	if (chan > 0) {
-		iwe.u.freq.m = freq_list[chan - 1] * 100000;
-		iwe.u.freq.e = 1;
-		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-						  &iwe, IW_EV_FREQ_LEN);
-	}
-
-	if (scan) {
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = IWEVQUAL;
-		if (local->last_scan_type == PRISM2_HOSTSCAN) {
-			iwe.u.qual.level = le16_to_cpu(scan->sl);
-			iwe.u.qual.noise = le16_to_cpu(scan->anl);
-		} else {
-			iwe.u.qual.level =
-				HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->sl));
-			iwe.u.qual.noise =
-				HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->anl));
-		}
-		iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED
-			| IW_QUAL_NOISE_UPDATED
-			| IW_QUAL_QUAL_INVALID
-			| IW_QUAL_DBM;
-		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-						  &iwe, IW_EV_QUAL_LEN);
-	}
-
-	memset(&iwe, 0, sizeof(iwe));
-	iwe.cmd = SIOCGIWENCODE;
-	if (capabilities & WLAN_CAPABILITY_PRIVACY)
-		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-	else
-		iwe.u.data.flags = IW_ENCODE_DISABLED;
-	iwe.u.data.length = 0;
-	current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, "");
-
-	/* TODO: add SuppRates into BSS table */
-	if (scan) {
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWRATE;
-		current_val = current_ev + iwe_stream_lcp_len(info);
-		pos = scan->sup_rates;
-		for (i = 0; i < sizeof(scan->sup_rates); i++) {
-			if (pos[i] == 0)
-				break;
-			/* Bit rate given in 500 kb/s units (+ 0x80) */
-			iwe.u.bitrate.value = ((pos[i] & 0x7f) * 500000);
-			current_val = iwe_stream_add_value(
-				info, current_ev, current_val, end_buf, &iwe,
-				IW_EV_PARAM_LEN);
-		}
-		/* Check if we added any event */
-		if ((current_val - current_ev) > iwe_stream_lcp_len(info))
-			current_ev = current_val;
-	}
-
-	/* TODO: add BeaconInt,resp_rate,atim into BSS table */
-	buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_ATOMIC);
-	if (buf && scan) {
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = IWEVCUSTOM;
-		sprintf(buf, "bcn_int=%d", le16_to_cpu(scan->beacon_interval));
-		iwe.u.data.length = strlen(buf);
-		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
-						  &iwe, buf);
-
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = IWEVCUSTOM;
-		sprintf(buf, "resp_rate=%d", le16_to_cpu(scan->rate));
-		iwe.u.data.length = strlen(buf);
-		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
-						  &iwe, buf);
-
-		if (local->last_scan_type == PRISM2_HOSTSCAN &&
-		    (capabilities & WLAN_CAPABILITY_IBSS)) {
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = IWEVCUSTOM;
-			sprintf(buf, "atim=%d", le16_to_cpu(scan->atim));
-			iwe.u.data.length = strlen(buf);
-			current_ev = iwe_stream_add_point(info, current_ev,
-							  end_buf, &iwe, buf);
-		}
-	}
-	kfree(buf);
-
-	if (bss && bss->wpa_ie_len > 0 && bss->wpa_ie_len <= MAX_WPA_IE_LEN) {
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = IWEVGENIE;
-		iwe.u.data.length = bss->wpa_ie_len;
-		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
-						  &iwe, bss->wpa_ie);
-	}
-
-	if (bss && bss->rsn_ie_len > 0 && bss->rsn_ie_len <= MAX_WPA_IE_LEN) {
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = IWEVGENIE;
-		iwe.u.data.length = bss->rsn_ie_len;
-		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
-						  &iwe, bss->rsn_ie);
-	}
-
-	return current_ev;
-}
-
-
-/* Translate scan data returned from the card to a card independent
- * format that the Wireless Tools will understand - Jean II */
-static inline int prism2_translate_scan(local_info_t *local,
-					struct iw_request_info *info,
-					char *buffer, int buflen)
-{
-	struct hfa384x_hostscan_result *scan;
-	int entry;
-	char *current_ev = buffer;
-	char *end_buf = buffer + buflen;
-	struct list_head *ptr;
-
-	spin_lock_bh(&local->lock);
-
-	list_for_each(ptr, &local->bss_list) {
-		struct hostap_bss_info *bss;
-		bss = list_entry(ptr, struct hostap_bss_info, list);
-		bss->included = 0;
-	}
-
-	for (entry = 0; entry < local->last_scan_results_count; entry++) {
-		int found = 0;
-		scan = &local->last_scan_results[entry];
-
-		/* Report every SSID if the AP is using multiple SSIDs. If no
-		 * BSS record is found (e.g., when WPA mode is disabled),
-		 * report the AP once. */
-		list_for_each(ptr, &local->bss_list) {
-			struct hostap_bss_info *bss;
-			bss = list_entry(ptr, struct hostap_bss_info, list);
-			if (ether_addr_equal(bss->bssid, scan->bssid)) {
-				bss->included = 1;
-				current_ev = __prism2_translate_scan(
-					local, info, scan, bss, current_ev,
-					end_buf);
-				found++;
-			}
-		}
-		if (!found) {
-			current_ev = __prism2_translate_scan(
-				local, info, scan, NULL, current_ev, end_buf);
-		}
-		/* Check if there is space for one more entry */
-		if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) {
-			/* Ask user space to try again with a bigger buffer */
-			spin_unlock_bh(&local->lock);
-			return -E2BIG;
-		}
-	}
-
-	/* Prism2 firmware has limits (32 at least in some versions) for number
-	 * of BSSes in scan results. Extend this limit by using local BSS list.
-	 */
-	list_for_each(ptr, &local->bss_list) {
-		struct hostap_bss_info *bss;
-		bss = list_entry(ptr, struct hostap_bss_info, list);
-		if (bss->included)
-			continue;
-		current_ev = __prism2_translate_scan(local, info, NULL, bss,
-						     current_ev, end_buf);
-		/* Check if there is space for one more entry */
-		if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) {
-			/* Ask user space to try again with a bigger buffer */
-			spin_unlock_bh(&local->lock);
-			return -E2BIG;
-		}
-	}
-
-	spin_unlock_bh(&local->lock);
-
-	return current_ev - buffer;
-}
-#endif /* PRISM2_NO_STATION_MODES */
-
-
-static inline int prism2_ioctl_giwscan_sta(struct net_device *dev,
-					   struct iw_request_info *info,
-					   struct iw_point *data, char *extra)
-{
-#ifdef PRISM2_NO_STATION_MODES
-	return -EOPNOTSUPP;
-#else /* PRISM2_NO_STATION_MODES */
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int res;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	/* Wait until the scan is finished. We can probably do better
-	 * than that - Jean II */
-	if (local->scan_timestamp &&
-	    time_before(jiffies, local->scan_timestamp + 3 * HZ)) {
-		/* Important note : we don't want to block the caller
-		 * until results are ready for various reasons.
-		 * First, managing wait queues is complex and racy
-		 * (there may be multiple simultaneous callers).
-		 * Second, we grab some rtnetlink lock before coming
-		 * here (in dev_ioctl()).
-		 * Third, the caller can wait on the Wireless Event
-		 * - Jean II */
-		return -EAGAIN;
-	}
-	local->scan_timestamp = 0;
-
-	res = prism2_translate_scan(local, info, extra, data->length);
-
-	if (res >= 0) {
-		data->length = res;
-		return 0;
-	} else {
-		data->length = 0;
-		return res;
-	}
-#endif /* PRISM2_NO_STATION_MODES */
-}
-
-
-static int prism2_ioctl_giwscan(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_point *data = &wrqu->data;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int res;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->iw_mode == IW_MODE_MASTER) {
-		/* In MASTER mode, it doesn't make sense to go around
-		 * scanning the frequencies and make the stations we serve
-		 * wait when what the user is really interested about is the
-		 * list of stations and access points we are talking to.
-		 * So, just extract results from our cache...
-		 * Jean II */
-
-		/* Translate to WE format */
-		res = prism2_ap_translate_scan(dev, info, extra);
-		if (res >= 0) {
-			printk(KERN_DEBUG "Scan result translation succeeded "
-			       "(length=%d)\n", res);
-			data->length = res;
-			return 0;
-		} else {
-			printk(KERN_DEBUG
-			       "Scan result translation failed (res=%d)\n",
-			       res);
-			data->length = 0;
-			return res;
-		}
-	} else {
-		/* Station mode */
-		return prism2_ioctl_giwscan_sta(dev, info, data, extra);
-	}
-}
-
-
-static const struct iw_priv_args prism2_priv[] = {
-	{ PRISM2_IOCTL_MONITOR,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor" },
-	{ PRISM2_IOCTL_READMIF,
-	  IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-	  IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "readmif" },
-	{ PRISM2_IOCTL_WRITEMIF,
-	  IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2, 0, "writemif" },
-	{ PRISM2_IOCTL_RESET,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "reset" },
-	{ PRISM2_IOCTL_INQUIRE,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "inquire" },
-	{ PRISM2_IOCTL_SET_RID_WORD,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_rid_word" },
-	{ PRISM2_IOCTL_MACCMD,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "maccmd" },
-	{ PRISM2_IOCTL_WDS_ADD,
-	  IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_add" },
-	{ PRISM2_IOCTL_WDS_DEL,
-	  IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_del" },
-	{ PRISM2_IOCTL_ADDMAC,
-	  IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "addmac" },
-	{ PRISM2_IOCTL_DELMAC,
-	  IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "delmac" },
-	{ PRISM2_IOCTL_KICKMAC,
-	  IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "kickmac" },
-	/* --- raw access to sub-ioctls --- */
-	{ PRISM2_IOCTL_PRISM2_PARAM,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "prism2_param" },
-	{ PRISM2_IOCTL_GET_PRISM2_PARAM,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprism2_param" },
-	/* --- sub-ioctls handlers --- */
-	{ PRISM2_IOCTL_PRISM2_PARAM,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "" },
-	{ PRISM2_IOCTL_GET_PRISM2_PARAM,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "" },
-	/* --- sub-ioctls definitions --- */
-	{ PRISM2_PARAM_TXRATECTRL,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "txratectrl" },
-	{ PRISM2_PARAM_TXRATECTRL,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettxratectrl" },
-	{ PRISM2_PARAM_BEACON_INT,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "beacon_int" },
-	{ PRISM2_PARAM_BEACON_INT,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbeacon_int" },
-#ifndef PRISM2_NO_STATION_MODES
-	{ PRISM2_PARAM_PSEUDO_IBSS,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "pseudo_ibss" },
-	{ PRISM2_PARAM_PSEUDO_IBSS,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getpseudo_ibss" },
-#endif /* PRISM2_NO_STATION_MODES */
-	{ PRISM2_PARAM_ALC,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "alc" },
-	{ PRISM2_PARAM_ALC,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getalc" },
-	{ PRISM2_PARAM_DUMP,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dump" },
-	{ PRISM2_PARAM_DUMP,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdump" },
-	{ PRISM2_PARAM_OTHER_AP_POLICY,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "other_ap_policy" },
-	{ PRISM2_PARAM_OTHER_AP_POLICY,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getother_ap_pol" },
-	{ PRISM2_PARAM_AP_MAX_INACTIVITY,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_inactivity" },
-	{ PRISM2_PARAM_AP_MAX_INACTIVITY,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_inactivi" },
-	{ PRISM2_PARAM_AP_BRIDGE_PACKETS,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bridge_packets" },
-	{ PRISM2_PARAM_AP_BRIDGE_PACKETS,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbridge_packe" },
-	{ PRISM2_PARAM_DTIM_PERIOD,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dtim_period" },
-	{ PRISM2_PARAM_DTIM_PERIOD,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdtim_period" },
-	{ PRISM2_PARAM_AP_NULLFUNC_ACK,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "nullfunc_ack" },
-	{ PRISM2_PARAM_AP_NULLFUNC_ACK,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getnullfunc_ack" },
-	{ PRISM2_PARAM_MAX_WDS,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_wds" },
-	{ PRISM2_PARAM_MAX_WDS,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_wds" },
-	{ PRISM2_PARAM_AP_AUTOM_AP_WDS,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "autom_ap_wds" },
-	{ PRISM2_PARAM_AP_AUTOM_AP_WDS,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getautom_ap_wds" },
-	{ PRISM2_PARAM_AP_AUTH_ALGS,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_auth_algs" },
-	{ PRISM2_PARAM_AP_AUTH_ALGS,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_auth_algs" },
-	{ PRISM2_PARAM_MONITOR_ALLOW_FCSERR,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "allow_fcserr" },
-	{ PRISM2_PARAM_MONITOR_ALLOW_FCSERR,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getallow_fcserr" },
-	{ PRISM2_PARAM_HOST_ENCRYPT,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_encrypt" },
-	{ PRISM2_PARAM_HOST_ENCRYPT,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_encrypt" },
-	{ PRISM2_PARAM_HOST_DECRYPT,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_decrypt" },
-	{ PRISM2_PARAM_HOST_DECRYPT,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_decrypt" },
-#ifndef PRISM2_NO_STATION_MODES
-	{ PRISM2_PARAM_HOST_ROAMING,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_roaming" },
-	{ PRISM2_PARAM_HOST_ROAMING,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_roaming" },
-#endif /* PRISM2_NO_STATION_MODES */
-	{ PRISM2_PARAM_BCRX_STA_KEY,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bcrx_sta_key" },
-	{ PRISM2_PARAM_BCRX_STA_KEY,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbcrx_sta_key" },
-	{ PRISM2_PARAM_IEEE_802_1X,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ieee_802_1x" },
-	{ PRISM2_PARAM_IEEE_802_1X,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getieee_802_1x" },
-	{ PRISM2_PARAM_ANTSEL_TX,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_tx" },
-	{ PRISM2_PARAM_ANTSEL_TX,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_tx" },
-	{ PRISM2_PARAM_ANTSEL_RX,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_rx" },
-	{ PRISM2_PARAM_ANTSEL_RX,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_rx" },
-	{ PRISM2_PARAM_MONITOR_TYPE,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor_type" },
-	{ PRISM2_PARAM_MONITOR_TYPE,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmonitor_type" },
-	{ PRISM2_PARAM_WDS_TYPE,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wds_type" },
-	{ PRISM2_PARAM_WDS_TYPE,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwds_type" },
-	{ PRISM2_PARAM_HOSTSCAN,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostscan" },
-	{ PRISM2_PARAM_HOSTSCAN,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostscan" },
-	{ PRISM2_PARAM_AP_SCAN,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_scan" },
-	{ PRISM2_PARAM_AP_SCAN,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_scan" },
-	{ PRISM2_PARAM_ENH_SEC,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "enh_sec" },
-	{ PRISM2_PARAM_ENH_SEC,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getenh_sec" },
-#ifdef PRISM2_IO_DEBUG
-	{ PRISM2_PARAM_IO_DEBUG,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "io_debug" },
-	{ PRISM2_PARAM_IO_DEBUG,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getio_debug" },
-#endif /* PRISM2_IO_DEBUG */
-	{ PRISM2_PARAM_BASIC_RATES,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "basic_rates" },
-	{ PRISM2_PARAM_BASIC_RATES,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbasic_rates" },
-	{ PRISM2_PARAM_OPER_RATES,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "oper_rates" },
-	{ PRISM2_PARAM_OPER_RATES,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getoper_rates" },
-	{ PRISM2_PARAM_HOSTAPD,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd" },
-	{ PRISM2_PARAM_HOSTAPD,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd" },
-	{ PRISM2_PARAM_HOSTAPD_STA,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd_sta" },
-	{ PRISM2_PARAM_HOSTAPD_STA,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd_sta" },
-	{ PRISM2_PARAM_WPA,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wpa" },
-	{ PRISM2_PARAM_WPA,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwpa" },
-	{ PRISM2_PARAM_PRIVACY_INVOKED,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "privacy_invoked" },
-	{ PRISM2_PARAM_PRIVACY_INVOKED,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprivacy_invo" },
-	{ PRISM2_PARAM_TKIP_COUNTERMEASURES,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "tkip_countermea" },
-	{ PRISM2_PARAM_TKIP_COUNTERMEASURES,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettkip_counter" },
-	{ PRISM2_PARAM_DROP_UNENCRYPTED,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "drop_unencrypte" },
-	{ PRISM2_PARAM_DROP_UNENCRYPTED,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdrop_unencry" },
-	{ PRISM2_PARAM_SCAN_CHANNEL_MASK,
-	  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "scan_channels" },
-	{ PRISM2_PARAM_SCAN_CHANNEL_MASK,
-	  0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getscan_channel" },
-};
-
-
-static int prism2_ioctl_priv_prism2_param(struct net_device *dev,
-					  struct iw_request_info *info,
-					  union iwreq_data *uwrq, char *extra)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int *i = (int *) extra;
-	int param = *i;
-	int value = *(i + 1);
-	int ret = 0;
-	u16 val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	switch (param) {
-	case PRISM2_PARAM_TXRATECTRL:
-		local->fw_tx_rate_control = value;
-		break;
-
-	case PRISM2_PARAM_BEACON_INT:
-		if (hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, value) ||
-		    local->func->reset_port(dev))
-			ret = -EINVAL;
-		else
-			local->beacon_int = value;
-		break;
-
-#ifndef PRISM2_NO_STATION_MODES
-	case PRISM2_PARAM_PSEUDO_IBSS:
-		if (value == local->pseudo_adhoc)
-			break;
-
-		if (value != 0 && value != 1) {
-			ret = -EINVAL;
-			break;
-		}
-
-		printk(KERN_DEBUG "prism2: %s: pseudo IBSS change %d -> %d\n",
-		       dev->name, local->pseudo_adhoc, value);
-		local->pseudo_adhoc = value;
-		if (local->iw_mode != IW_MODE_ADHOC)
-			break;
-
-		if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
-				    hostap_get_porttype(local))) {
-			ret = -EOPNOTSUPP;
-			break;
-		}
-
-		if (local->func->reset_port(dev))
-			ret = -EINVAL;
-		break;
-#endif /* PRISM2_NO_STATION_MODES */
-
-	case PRISM2_PARAM_ALC:
-		printk(KERN_DEBUG "%s: %s ALC\n", dev->name,
-		       value == 0 ? "Disabling" : "Enabling");
-		val = HFA384X_TEST_CFG_BIT_ALC;
-		local->func->cmd(dev, HFA384X_CMDCODE_TEST |
-				 (HFA384X_TEST_CFG_BITS << 8),
-				 value == 0 ? 0 : 1, &val, NULL);
-		break;
-
-	case PRISM2_PARAM_DUMP:
-		local->frame_dump = value;
-		break;
-
-	case PRISM2_PARAM_OTHER_AP_POLICY:
-		if (value < 0 || value > 3) {
-			ret = -EINVAL;
-			break;
-		}
-		if (local->ap != NULL)
-			local->ap->ap_policy = value;
-		break;
-
-	case PRISM2_PARAM_AP_MAX_INACTIVITY:
-		if (value < 0 || value > 7 * 24 * 60 * 60) {
-			ret = -EINVAL;
-			break;
-		}
-		if (local->ap != NULL)
-			local->ap->max_inactivity = value * HZ;
-		break;
-
-	case PRISM2_PARAM_AP_BRIDGE_PACKETS:
-		if (local->ap != NULL)
-			local->ap->bridge_packets = value;
-		break;
-
-	case PRISM2_PARAM_DTIM_PERIOD:
-		if (value < 0 || value > 65535) {
-			ret = -EINVAL;
-			break;
-		}
-		if (hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, value)
-		    || local->func->reset_port(dev))
-			ret = -EINVAL;
-		else
-			local->dtim_period = value;
-		break;
-
-	case PRISM2_PARAM_AP_NULLFUNC_ACK:
-		if (local->ap != NULL)
-			local->ap->nullfunc_ack = value;
-		break;
-
-	case PRISM2_PARAM_MAX_WDS:
-		local->wds_max_connections = value;
-		break;
-
-	case PRISM2_PARAM_AP_AUTOM_AP_WDS:
-		if (local->ap != NULL) {
-			if (!local->ap->autom_ap_wds && value) {
-				/* add WDS link to all APs in STA table */
-				hostap_add_wds_links(local);
-			}
-			local->ap->autom_ap_wds = value;
-		}
-		break;
-
-	case PRISM2_PARAM_AP_AUTH_ALGS:
-		local->auth_algs = value;
-		if (hostap_set_auth_algs(local))
-			ret = -EINVAL;
-		break;
-
-	case PRISM2_PARAM_MONITOR_ALLOW_FCSERR:
-		local->monitor_allow_fcserr = value;
-		break;
-
-	case PRISM2_PARAM_HOST_ENCRYPT:
-		local->host_encrypt = value;
-		if (hostap_set_encryption(local) ||
-		    local->func->reset_port(dev))
-			ret = -EINVAL;
-		break;
-
-	case PRISM2_PARAM_HOST_DECRYPT:
-		local->host_decrypt = value;
-		if (hostap_set_encryption(local) ||
-		    local->func->reset_port(dev))
-			ret = -EINVAL;
-		break;
-
-#ifndef PRISM2_NO_STATION_MODES
-	case PRISM2_PARAM_HOST_ROAMING:
-		if (value < 0 || value > 2) {
-			ret = -EINVAL;
-			break;
-		}
-		local->host_roaming = value;
-		if (hostap_set_roaming(local) || local->func->reset_port(dev))
-			ret = -EINVAL;
-		break;
-#endif /* PRISM2_NO_STATION_MODES */
-
-	case PRISM2_PARAM_BCRX_STA_KEY:
-		local->bcrx_sta_key = value;
-		break;
-
-	case PRISM2_PARAM_IEEE_802_1X:
-		local->ieee_802_1x = value;
-		break;
-
-	case PRISM2_PARAM_ANTSEL_TX:
-		if (value < 0 || value > HOSTAP_ANTSEL_HIGH) {
-			ret = -EINVAL;
-			break;
-		}
-		local->antsel_tx = value;
-		hostap_set_antsel(local);
-		break;
-
-	case PRISM2_PARAM_ANTSEL_RX:
-		if (value < 0 || value > HOSTAP_ANTSEL_HIGH) {
-			ret = -EINVAL;
-			break;
-		}
-		local->antsel_rx = value;
-		hostap_set_antsel(local);
-		break;
-
-	case PRISM2_PARAM_MONITOR_TYPE:
-		if (value != PRISM2_MONITOR_80211 &&
-		    value != PRISM2_MONITOR_CAPHDR &&
-		    value != PRISM2_MONITOR_PRISM &&
-		    value != PRISM2_MONITOR_RADIOTAP) {
-			ret = -EINVAL;
-			break;
-		}
-		local->monitor_type = value;
-		if (local->iw_mode == IW_MODE_MONITOR)
-			hostap_monitor_set_type(local);
-		break;
-
-	case PRISM2_PARAM_WDS_TYPE:
-		local->wds_type = value;
-		break;
-
-	case PRISM2_PARAM_HOSTSCAN:
-	{
-		struct hfa384x_hostscan_request scan_req;
-		u16 rate;
-
-		memset(&scan_req, 0, sizeof(scan_req));
-		scan_req.channel_list = cpu_to_le16(0x3fff);
-		switch (value) {
-		case 1: rate = HFA384X_RATES_1MBPS; break;
-		case 2: rate = HFA384X_RATES_2MBPS; break;
-		case 3: rate = HFA384X_RATES_5MBPS; break;
-		case 4: rate = HFA384X_RATES_11MBPS; break;
-		default: rate = HFA384X_RATES_1MBPS; break;
-		}
-		scan_req.txrate = cpu_to_le16(rate);
-		/* leave SSID empty to accept all SSIDs */
-
-		if (local->iw_mode == IW_MODE_MASTER) {
-			if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
-					    HFA384X_PORTTYPE_BSS) ||
-			    local->func->reset_port(dev))
-				printk(KERN_DEBUG "Leaving Host AP mode "
-				       "for HostScan failed\n");
-		}
-
-		if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req,
-					 sizeof(scan_req))) {
-			printk(KERN_DEBUG "HOSTSCAN failed\n");
-			ret = -EINVAL;
-		}
-		if (local->iw_mode == IW_MODE_MASTER) {
-			wait_queue_entry_t __wait;
-			init_waitqueue_entry(&__wait, current);
-			add_wait_queue(&local->hostscan_wq, &__wait);
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule_timeout(HZ);
-			if (signal_pending(current))
-				ret = -EINTR;
-			set_current_state(TASK_RUNNING);
-			remove_wait_queue(&local->hostscan_wq, &__wait);
-
-			if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
-					    HFA384X_PORTTYPE_HOSTAP) ||
-			    local->func->reset_port(dev))
-				printk(KERN_DEBUG "Returning to Host AP mode "
-				       "after HostScan failed\n");
-		}
-		break;
-	}
-
-	case PRISM2_PARAM_AP_SCAN:
-		local->passive_scan_interval = value;
-		if (timer_pending(&local->passive_scan_timer))
-			del_timer(&local->passive_scan_timer);
-		if (value > 0 && value < INT_MAX / HZ) {
-			local->passive_scan_timer.expires = jiffies +
-				local->passive_scan_interval * HZ;
-			add_timer(&local->passive_scan_timer);
-		}
-		break;
-
-	case PRISM2_PARAM_ENH_SEC:
-		if (value < 0 || value > 3) {
-			ret = -EINVAL;
-			break;
-		}
-		local->enh_sec = value;
-		if (hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY,
-				    local->enh_sec) ||
-		    local->func->reset_port(dev)) {
-			printk(KERN_INFO "%s: cnfEnhSecurity requires STA f/w "
-			       "1.6.3 or newer\n", dev->name);
-			ret = -EOPNOTSUPP;
-		}
-		break;
-
-#ifdef PRISM2_IO_DEBUG
-	case PRISM2_PARAM_IO_DEBUG:
-		local->io_debug_enabled = value;
-		break;
-#endif /* PRISM2_IO_DEBUG */
-
-	case PRISM2_PARAM_BASIC_RATES:
-		if ((value & local->tx_rate_control) != value || value == 0) {
-			printk(KERN_INFO "%s: invalid basic rate set - basic "
-			       "rates must be in supported rate set\n",
-			       dev->name);
-			ret = -EINVAL;
-			break;
-		}
-		local->basic_rates = value;
-		if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES,
-				    local->basic_rates) ||
-		    local->func->reset_port(dev))
-			ret = -EINVAL;
-		break;
-
-	case PRISM2_PARAM_OPER_RATES:
-		local->tx_rate_control = value;
-		if (hostap_set_rate(dev))
-			ret = -EINVAL;
-		break;
-
-	case PRISM2_PARAM_HOSTAPD:
-		ret = hostap_set_hostapd(local, value, 1);
-		break;
-
-	case PRISM2_PARAM_HOSTAPD_STA:
-		ret = hostap_set_hostapd_sta(local, value, 1);
-		break;
-
-	case PRISM2_PARAM_WPA:
-		local->wpa = value;
-		if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0))
-			ret = -EOPNOTSUPP;
-		else if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE,
-					 value ? 1 : 0))
-			ret = -EINVAL;
-		break;
-
-	case PRISM2_PARAM_PRIVACY_INVOKED:
-		local->privacy_invoked = value;
-		if (hostap_set_encryption(local) ||
-		    local->func->reset_port(dev))
-			ret = -EINVAL;
-		break;
-
-	case PRISM2_PARAM_TKIP_COUNTERMEASURES:
-		local->tkip_countermeasures = value;
-		break;
-
-	case PRISM2_PARAM_DROP_UNENCRYPTED:
-		local->drop_unencrypted = value;
-		break;
-
-	case PRISM2_PARAM_SCAN_CHANNEL_MASK:
-		local->scan_channel_mask = value;
-		break;
-
-	default:
-		printk(KERN_DEBUG "%s: prism2_param: unknown param %d\n",
-		       dev->name, param);
-		ret = -EOPNOTSUPP;
-		break;
-	}
-
-	return ret;
-}
-
-
-static int prism2_ioctl_priv_get_prism2_param(struct net_device *dev,
-					      struct iw_request_info *info,
-					      union iwreq_data *wrqu, char *extra)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int *param = (int *) extra;
-	int ret = 0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	switch (*param) {
-	case PRISM2_PARAM_TXRATECTRL:
-		*param = local->fw_tx_rate_control;
-		break;
-
-	case PRISM2_PARAM_BEACON_INT:
-		*param = local->beacon_int;
-		break;
-
-	case PRISM2_PARAM_PSEUDO_IBSS:
-		*param = local->pseudo_adhoc;
-		break;
-
-	case PRISM2_PARAM_ALC:
-		ret = -EOPNOTSUPP; /* FIX */
-		break;
-
-	case PRISM2_PARAM_DUMP:
-		*param = local->frame_dump;
-		break;
-
-	case PRISM2_PARAM_OTHER_AP_POLICY:
-		if (local->ap != NULL)
-			*param = local->ap->ap_policy;
-		else
-			ret = -EOPNOTSUPP;
-		break;
-
-	case PRISM2_PARAM_AP_MAX_INACTIVITY:
-		if (local->ap != NULL)
-			*param = local->ap->max_inactivity / HZ;
-		else
-			ret = -EOPNOTSUPP;
-		break;
-
-	case PRISM2_PARAM_AP_BRIDGE_PACKETS:
-		if (local->ap != NULL)
-			*param = local->ap->bridge_packets;
-		else
-			ret = -EOPNOTSUPP;
-		break;
-
-	case PRISM2_PARAM_DTIM_PERIOD:
-		*param = local->dtim_period;
-		break;
-
-	case PRISM2_PARAM_AP_NULLFUNC_ACK:
-		if (local->ap != NULL)
-			*param = local->ap->nullfunc_ack;
-		else
-			ret = -EOPNOTSUPP;
-		break;
-
-	case PRISM2_PARAM_MAX_WDS:
-		*param = local->wds_max_connections;
-		break;
-
-	case PRISM2_PARAM_AP_AUTOM_AP_WDS:
-		if (local->ap != NULL)
-			*param = local->ap->autom_ap_wds;
-		else
-			ret = -EOPNOTSUPP;
-		break;
-
-	case PRISM2_PARAM_AP_AUTH_ALGS:
-		*param = local->auth_algs;
-		break;
-
-	case PRISM2_PARAM_MONITOR_ALLOW_FCSERR:
-		*param = local->monitor_allow_fcserr;
-		break;
-
-	case PRISM2_PARAM_HOST_ENCRYPT:
-		*param = local->host_encrypt;
-		break;
-
-	case PRISM2_PARAM_HOST_DECRYPT:
-		*param = local->host_decrypt;
-		break;
-
-	case PRISM2_PARAM_HOST_ROAMING:
-		*param = local->host_roaming;
-		break;
-
-	case PRISM2_PARAM_BCRX_STA_KEY:
-		*param = local->bcrx_sta_key;
-		break;
-
-	case PRISM2_PARAM_IEEE_802_1X:
-		*param = local->ieee_802_1x;
-		break;
-
-	case PRISM2_PARAM_ANTSEL_TX:
-		*param = local->antsel_tx;
-		break;
-
-	case PRISM2_PARAM_ANTSEL_RX:
-		*param = local->antsel_rx;
-		break;
-
-	case PRISM2_PARAM_MONITOR_TYPE:
-		*param = local->monitor_type;
-		break;
-
-	case PRISM2_PARAM_WDS_TYPE:
-		*param = local->wds_type;
-		break;
-
-	case PRISM2_PARAM_HOSTSCAN:
-		ret = -EOPNOTSUPP;
-		break;
-
-	case PRISM2_PARAM_AP_SCAN:
-		*param = local->passive_scan_interval;
-		break;
-
-	case PRISM2_PARAM_ENH_SEC:
-		*param = local->enh_sec;
-		break;
-
-#ifdef PRISM2_IO_DEBUG
-	case PRISM2_PARAM_IO_DEBUG:
-		*param = local->io_debug_enabled;
-		break;
-#endif /* PRISM2_IO_DEBUG */
-
-	case PRISM2_PARAM_BASIC_RATES:
-		*param = local->basic_rates;
-		break;
-
-	case PRISM2_PARAM_OPER_RATES:
-		*param = local->tx_rate_control;
-		break;
-
-	case PRISM2_PARAM_HOSTAPD:
-		*param = local->hostapd;
-		break;
-
-	case PRISM2_PARAM_HOSTAPD_STA:
-		*param = local->hostapd_sta;
-		break;
-
-	case PRISM2_PARAM_WPA:
-		if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0))
-			ret = -EOPNOTSUPP;
-		*param = local->wpa;
-		break;
-
-	case PRISM2_PARAM_PRIVACY_INVOKED:
-		*param = local->privacy_invoked;
-		break;
-
-	case PRISM2_PARAM_TKIP_COUNTERMEASURES:
-		*param = local->tkip_countermeasures;
-		break;
-
-	case PRISM2_PARAM_DROP_UNENCRYPTED:
-		*param = local->drop_unencrypted;
-		break;
-
-	case PRISM2_PARAM_SCAN_CHANNEL_MASK:
-		*param = local->scan_channel_mask;
-		break;
-
-	default:
-		printk(KERN_DEBUG "%s: get_prism2_param: unknown param %d\n",
-		       dev->name, *param);
-		ret = -EOPNOTSUPP;
-		break;
-	}
-
-	return ret;
-}
-
-
-static int prism2_ioctl_priv_readmif(struct net_device *dev,
-				     struct iw_request_info *info,
-				     union iwreq_data *wrqu, char *extra)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	u16 resp0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, *extra, NULL,
-			     &resp0))
-		return -EOPNOTSUPP;
-	else
-		*extra = resp0;
-
-	return 0;
-}
-
-
-static int prism2_ioctl_priv_writemif(struct net_device *dev,
-				      struct iw_request_info *info,
-				      union iwreq_data *wrqu, char *extra)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	u16 cr, val;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	cr = *extra;
-	val = *(extra + 1);
-	if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, cr, &val, NULL))
-		return -EOPNOTSUPP;
-
-	return 0;
-}
-
-
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-static int prism2_ioctl_priv_download(local_info_t *local, struct iw_point *p)
-{
-	struct prism2_download_param *param;
-	int ret = 0;
-
-	if (p->length < sizeof(struct prism2_download_param) ||
-	    p->length > 1024 || !p->pointer)
-		return -EINVAL;
-
-	param = memdup_user(p->pointer, p->length);
-	if (IS_ERR(param)) {
-		return PTR_ERR(param);
-	}
-
-	if (p->length < sizeof(struct prism2_download_param) +
-	    param->num_areas * sizeof(struct prism2_download_area)) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	ret = local->func->download(local, param);
-
- out:
-	kfree(param);
-	return ret;
-}
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-
-
-static int prism2_set_genericelement(struct net_device *dev, u8 *elem,
-				     size_t len)
-{
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-	u8 *buf;
-
-	/*
-	 * Add 16-bit length in the beginning of the buffer because Prism2 RID
-	 * includes it.
-	 */
-	buf = kmalloc(len + 2, GFP_KERNEL);
-	if (buf == NULL)
-		return -ENOMEM;
-
-	*((__le16 *) buf) = cpu_to_le16(len);
-	memcpy(buf + 2, elem, len);
-
-	kfree(local->generic_elem);
-	local->generic_elem = buf;
-	local->generic_elem_len = len + 2;
-
-	return local->func->set_rid(local->dev, HFA384X_RID_GENERICELEMENT,
-				    buf, len + 2);
-}
-
-
-static int prism2_ioctl_siwauth(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *data = &wrqu->param;
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-
-	switch (data->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_WPA_VERSION:
-	case IW_AUTH_CIPHER_PAIRWISE:
-	case IW_AUTH_CIPHER_GROUP:
-	case IW_AUTH_KEY_MGMT:
-		/*
-		 * Host AP driver does not use these parameters and allows
-		 * wpa_supplicant to control them internally.
-		 */
-		break;
-	case IW_AUTH_TKIP_COUNTERMEASURES:
-		local->tkip_countermeasures = data->value;
-		break;
-	case IW_AUTH_DROP_UNENCRYPTED:
-		local->drop_unencrypted = data->value;
-		break;
-	case IW_AUTH_80211_AUTH_ALG:
-		local->auth_algs = data->value;
-		break;
-	case IW_AUTH_WPA_ENABLED:
-		if (data->value == 0) {
-			local->wpa = 0;
-			if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0))
-				break;
-			prism2_set_genericelement(dev, "", 0);
-			local->host_roaming = 0;
-			local->privacy_invoked = 0;
-			if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE,
-					    0) ||
-			    hostap_set_roaming(local) ||
-			    hostap_set_encryption(local) ||
-			    local->func->reset_port(dev))
-				return -EINVAL;
-			break;
-		}
-		if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0))
-			return -EOPNOTSUPP;
-		local->host_roaming = 2;
-		local->privacy_invoked = 1;
-		local->wpa = 1;
-		if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1) ||
-		    hostap_set_roaming(local) ||
-		    hostap_set_encryption(local) ||
-		    local->func->reset_port(dev))
-			return -EINVAL;
-		break;
-	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-		local->ieee_802_1x = data->value;
-		break;
-	case IW_AUTH_PRIVACY_INVOKED:
-		local->privacy_invoked = data->value;
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-
-static int prism2_ioctl_giwauth(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_param *data = &wrqu->param;
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-
-	switch (data->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_WPA_VERSION:
-	case IW_AUTH_CIPHER_PAIRWISE:
-	case IW_AUTH_CIPHER_GROUP:
-	case IW_AUTH_KEY_MGMT:
-		/*
-		 * Host AP driver does not use these parameters and allows
-		 * wpa_supplicant to control them internally.
-		 */
-		return -EOPNOTSUPP;
-	case IW_AUTH_TKIP_COUNTERMEASURES:
-		data->value = local->tkip_countermeasures;
-		break;
-	case IW_AUTH_DROP_UNENCRYPTED:
-		data->value = local->drop_unencrypted;
-		break;
-	case IW_AUTH_80211_AUTH_ALG:
-		data->value = local->auth_algs;
-		break;
-	case IW_AUTH_WPA_ENABLED:
-		data->value = local->wpa;
-		break;
-	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-		data->value = local->ieee_802_1x;
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-
-static int prism2_ioctl_siwencodeext(struct net_device *dev,
-				     struct iw_request_info *info,
-				     union iwreq_data *wrqu, char *extra)
-{
-	struct iw_point *erq = &wrqu->encoding;
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
-	int i, ret = 0;
-	struct lib80211_crypto_ops *ops;
-	struct lib80211_crypt_data **crypt;
-	void *sta_ptr;
-	u8 *addr;
-	const char *alg, *module;
-
-	i = erq->flags & IW_ENCODE_INDEX;
-	if (i > WEP_KEYS)
-		return -EINVAL;
-	if (i < 1 || i > WEP_KEYS)
-		i = local->crypt_info.tx_keyidx;
-	else
-		i--;
-	if (i < 0 || i >= WEP_KEYS)
-		return -EINVAL;
-
-	addr = ext->addr.sa_data;
-	if (is_broadcast_ether_addr(addr)) {
-		sta_ptr = NULL;
-		crypt = &local->crypt_info.crypt[i];
-	} else {
-		if (i != 0)
-			return -EINVAL;
-		sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt);
-		if (sta_ptr == NULL) {
-			if (local->iw_mode == IW_MODE_INFRA) {
-				/*
-				 * TODO: add STA entry for the current AP so
-				 * that unicast key can be used. For now, this
-				 * is emulated by using default key idx 0.
-				 */
-				i = 0;
-				crypt = &local->crypt_info.crypt[i];
-			} else
-				return -EINVAL;
-		}
-	}
-
-	if ((erq->flags & IW_ENCODE_DISABLED) ||
-	    ext->alg == IW_ENCODE_ALG_NONE) {
-		if (*crypt)
-			lib80211_crypt_delayed_deinit(&local->crypt_info, crypt);
-		goto done;
-	}
-
-	switch (ext->alg) {
-	case IW_ENCODE_ALG_WEP:
-		alg = "WEP";
-		module = "lib80211_crypt_wep";
-		break;
-	case IW_ENCODE_ALG_TKIP:
-		alg = "TKIP";
-		module = "lib80211_crypt_tkip";
-		break;
-	case IW_ENCODE_ALG_CCMP:
-		alg = "CCMP";
-		module = "lib80211_crypt_ccmp";
-		break;
-	default:
-		printk(KERN_DEBUG "%s: unsupported algorithm %d\n",
-		       local->dev->name, ext->alg);
-		ret = -EOPNOTSUPP;
-		goto done;
-	}
-
-	ops = lib80211_get_crypto_ops(alg);
-	if (ops == NULL) {
-		request_module(module);
-		ops = lib80211_get_crypto_ops(alg);
-	}
-	if (ops == NULL) {
-		printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n",
-		       local->dev->name, alg);
-		ret = -EOPNOTSUPP;
-		goto done;
-	}
-
-	if (sta_ptr || ext->alg != IW_ENCODE_ALG_WEP) {
-		/*
-		 * Per station encryption and other than WEP algorithms
-		 * require host-based encryption, so force them on
-		 * automatically.
-		 */
-		local->host_decrypt = local->host_encrypt = 1;
-	}
-
-	if (*crypt == NULL || (*crypt)->ops != ops) {
-		struct lib80211_crypt_data *new_crypt;
-
-		lib80211_crypt_delayed_deinit(&local->crypt_info, crypt);
-
-		new_crypt = kzalloc(sizeof(struct lib80211_crypt_data),
-				GFP_KERNEL);
-		if (new_crypt == NULL) {
-			ret = -ENOMEM;
-			goto done;
-		}
-		new_crypt->ops = ops;
-		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
-			new_crypt->priv = new_crypt->ops->init(i);
-		if (new_crypt->priv == NULL) {
-			kfree(new_crypt);
-			ret = -EINVAL;
-			goto done;
-		}
-
-		*crypt = new_crypt;
-	}
-
-	/*
-	 * TODO: if ext_flags does not have IW_ENCODE_EXT_RX_SEQ_VALID, the
-	 * existing seq# should not be changed.
-	 * TODO: if ext_flags has IW_ENCODE_EXT_TX_SEQ_VALID, next TX seq#
-	 * should be changed to something else than zero.
-	 */
-	if ((!(ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) || ext->key_len > 0)
-	    && (*crypt)->ops->set_key &&
-	    (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
-				   (*crypt)->priv) < 0) {
-		printk(KERN_DEBUG "%s: key setting failed\n",
-		       local->dev->name);
-		ret = -EINVAL;
-		goto done;
-	}
-
-	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
-		if (!sta_ptr)
-			local->crypt_info.tx_keyidx = i;
-	}
-
-
-	if (sta_ptr == NULL && ext->key_len > 0) {
-		int first = 1, j;
-		for (j = 0; j < WEP_KEYS; j++) {
-			if (j != i && local->crypt_info.crypt[j]) {
-				first = 0;
-				break;
-			}
-		}
-		if (first)
-			local->crypt_info.tx_keyidx = i;
-	}
-
- done:
-	if (sta_ptr)
-		hostap_handle_sta_release(sta_ptr);
-
-	local->open_wep = erq->flags & IW_ENCODE_OPEN;
-
-	/*
-	 * Do not reset port0 if card is in Managed mode since resetting will
-	 * generate new IEEE 802.11 authentication which may end up in looping
-	 * with IEEE 802.1X. Prism2 documentation seem to require port reset
-	 * after WEP configuration. However, keys are apparently changed at
-	 * least in Managed mode.
-	 */
-	if (ret == 0 &&
-	    (hostap_set_encryption(local) ||
-	     (local->iw_mode != IW_MODE_INFRA &&
-	      local->func->reset_port(local->dev))))
-		ret = -EINVAL;
-
-	return ret;
-}
-
-
-static int prism2_ioctl_giwencodeext(struct net_device *dev,
-				     struct iw_request_info *info,
-				     union iwreq_data *wrqu, char *extra)
-{
-	struct iw_point *erq = &wrqu->encoding;
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-	struct lib80211_crypt_data **crypt;
-	void *sta_ptr;
-	int max_key_len, i;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
-	u8 *addr;
-
-	max_key_len = erq->length - sizeof(*ext);
-	if (max_key_len < 0)
-		return -EINVAL;
-
-	i = erq->flags & IW_ENCODE_INDEX;
-	if (i < 1 || i > WEP_KEYS)
-		i = local->crypt_info.tx_keyidx;
-	else
-		i--;
-
-	addr = ext->addr.sa_data;
-	if (is_broadcast_ether_addr(addr)) {
-		sta_ptr = NULL;
-		crypt = &local->crypt_info.crypt[i];
-	} else {
-		i = 0;
-		sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt);
-		if (sta_ptr == NULL)
-			return -EINVAL;
-	}
-	erq->flags = i + 1;
-	memset(ext, 0, sizeof(*ext));
-
-	if (*crypt == NULL || (*crypt)->ops == NULL) {
-		ext->alg = IW_ENCODE_ALG_NONE;
-		ext->key_len = 0;
-		erq->flags |= IW_ENCODE_DISABLED;
-	} else {
-		if (strcmp((*crypt)->ops->name, "WEP") == 0)
-			ext->alg = IW_ENCODE_ALG_WEP;
-		else if (strcmp((*crypt)->ops->name, "TKIP") == 0)
-			ext->alg = IW_ENCODE_ALG_TKIP;
-		else if (strcmp((*crypt)->ops->name, "CCMP") == 0)
-			ext->alg = IW_ENCODE_ALG_CCMP;
-		else
-			return -EINVAL;
-
-		if ((*crypt)->ops->get_key) {
-			ext->key_len =
-				(*crypt)->ops->get_key(ext->key,
-						       max_key_len,
-						       ext->tx_seq,
-						       (*crypt)->priv);
-			if (ext->key_len &&
-			    (ext->alg == IW_ENCODE_ALG_TKIP ||
-			     ext->alg == IW_ENCODE_ALG_CCMP))
-				ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID;
-		}
-	}
-
-	if (sta_ptr)
-		hostap_handle_sta_release(sta_ptr);
-
-	return 0;
-}
-
-
-static int prism2_ioctl_set_encryption(local_info_t *local,
-				       struct prism2_hostapd_param *param,
-				       int param_len)
-{
-	int ret = 0;
-	struct lib80211_crypto_ops *ops;
-	struct lib80211_crypt_data **crypt;
-	void *sta_ptr;
-
-	param->u.crypt.err = 0;
-	param->u.crypt.alg[HOSTAP_CRYPT_ALG_NAME_LEN - 1] = '\0';
-
-	if (param_len !=
-	    (int) ((char *) param->u.crypt.key - (char *) param) +
-	    param->u.crypt.key_len)
-		return -EINVAL;
-
-	if (is_broadcast_ether_addr(param->sta_addr)) {
-		if (param->u.crypt.idx >= WEP_KEYS)
-			return -EINVAL;
-		sta_ptr = NULL;
-		crypt = &local->crypt_info.crypt[param->u.crypt.idx];
-	} else {
-		if (param->u.crypt.idx)
-			return -EINVAL;
-		sta_ptr = ap_crypt_get_ptrs(
-			local->ap, param->sta_addr,
-			(param->u.crypt.flags & HOSTAP_CRYPT_FLAG_PERMANENT),
-			&crypt);
-
-		if (sta_ptr == NULL) {
-			param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR;
-			return -EINVAL;
-		}
-	}
-
-	if (strcmp(param->u.crypt.alg, "none") == 0) {
-		if (crypt)
-			lib80211_crypt_delayed_deinit(&local->crypt_info, crypt);
-		goto done;
-	}
-
-	ops = lib80211_get_crypto_ops(param->u.crypt.alg);
-	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
-		request_module("lib80211_crypt_wep");
-		ops = lib80211_get_crypto_ops(param->u.crypt.alg);
-	} else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
-		request_module("lib80211_crypt_tkip");
-		ops = lib80211_get_crypto_ops(param->u.crypt.alg);
-	} else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
-		request_module("lib80211_crypt_ccmp");
-		ops = lib80211_get_crypto_ops(param->u.crypt.alg);
-	}
-	if (ops == NULL) {
-		printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n",
-		       local->dev->name, param->u.crypt.alg);
-		param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ALG;
-		ret = -EINVAL;
-		goto done;
-	}
-
-	/* station based encryption and other than WEP algorithms require
-	 * host-based encryption, so force them on automatically */
-	local->host_decrypt = local->host_encrypt = 1;
-
-	if (*crypt == NULL || (*crypt)->ops != ops) {
-		struct lib80211_crypt_data *new_crypt;
-
-		lib80211_crypt_delayed_deinit(&local->crypt_info, crypt);
-
-		new_crypt = kzalloc(sizeof(struct lib80211_crypt_data),
-				GFP_KERNEL);
-		if (new_crypt == NULL) {
-			ret = -ENOMEM;
-			goto done;
-		}
-		new_crypt->ops = ops;
-		new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx);
-		if (new_crypt->priv == NULL) {
-			kfree(new_crypt);
-			param->u.crypt.err =
-				HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED;
-			ret = -EINVAL;
-			goto done;
-		}
-
-		*crypt = new_crypt;
-	}
-
-	if ((!(param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) ||
-	     param->u.crypt.key_len > 0) && (*crypt)->ops->set_key &&
-	    (*crypt)->ops->set_key(param->u.crypt.key,
-				   param->u.crypt.key_len, param->u.crypt.seq,
-				   (*crypt)->priv) < 0) {
-		printk(KERN_DEBUG "%s: key setting failed\n",
-		       local->dev->name);
-		param->u.crypt.err = HOSTAP_CRYPT_ERR_KEY_SET_FAILED;
-		ret = -EINVAL;
-		goto done;
-	}
-
-	if (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) {
-		if (!sta_ptr)
-			local->crypt_info.tx_keyidx = param->u.crypt.idx;
-		else if (param->u.crypt.idx) {
-			printk(KERN_DEBUG "%s: TX key idx setting failed\n",
-			       local->dev->name);
-			param->u.crypt.err =
-				HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED;
-			ret = -EINVAL;
-			goto done;
-		}
-	}
-
- done:
-	if (sta_ptr)
-		hostap_handle_sta_release(sta_ptr);
-
-	/* Do not reset port0 if card is in Managed mode since resetting will
-	 * generate new IEEE 802.11 authentication which may end up in looping
-	 * with IEEE 802.1X. Prism2 documentation seem to require port reset
-	 * after WEP configuration. However, keys are apparently changed at
-	 * least in Managed mode. */
-	if (ret == 0 &&
-	    (hostap_set_encryption(local) ||
-	     (local->iw_mode != IW_MODE_INFRA &&
-	      local->func->reset_port(local->dev)))) {
-		param->u.crypt.err = HOSTAP_CRYPT_ERR_CARD_CONF_FAILED;
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-
-static int prism2_ioctl_get_encryption(local_info_t *local,
-				       struct prism2_hostapd_param *param,
-				       int param_len)
-{
-	struct lib80211_crypt_data **crypt;
-	void *sta_ptr;
-	int max_key_len;
-
-	param->u.crypt.err = 0;
-
-	max_key_len = param_len -
-		(int) ((char *) param->u.crypt.key - (char *) param);
-	if (max_key_len < 0)
-		return -EINVAL;
-
-	if (is_broadcast_ether_addr(param->sta_addr)) {
-		sta_ptr = NULL;
-		if (param->u.crypt.idx >= WEP_KEYS)
-			param->u.crypt.idx = local->crypt_info.tx_keyidx;
-		crypt = &local->crypt_info.crypt[param->u.crypt.idx];
-	} else {
-		param->u.crypt.idx = 0;
-		sta_ptr = ap_crypt_get_ptrs(local->ap, param->sta_addr, 0,
-					    &crypt);
-
-		if (sta_ptr == NULL) {
-			param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR;
-			return -EINVAL;
-		}
-	}
-
-	if (*crypt == NULL || (*crypt)->ops == NULL) {
-		memcpy(param->u.crypt.alg, "none", 5);
-		param->u.crypt.key_len = 0;
-		param->u.crypt.idx = 0xff;
-	} else {
-		strscpy(param->u.crypt.alg, (*crypt)->ops->name,
-			HOSTAP_CRYPT_ALG_NAME_LEN);
-		param->u.crypt.key_len = 0;
-
-		memset(param->u.crypt.seq, 0, 8);
-		if ((*crypt)->ops->get_key) {
-			param->u.crypt.key_len =
-				(*crypt)->ops->get_key(param->u.crypt.key,
-						       max_key_len,
-						       param->u.crypt.seq,
-						       (*crypt)->priv);
-		}
-	}
-
-	if (sta_ptr)
-		hostap_handle_sta_release(sta_ptr);
-
-	return 0;
-}
-
-
-static int prism2_ioctl_get_rid(local_info_t *local,
-				struct prism2_hostapd_param *param,
-				int param_len)
-{
-	int max_len, res;
-
-	max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN;
-	if (max_len < 0)
-		return -EINVAL;
-
-	res = local->func->get_rid(local->dev, param->u.rid.rid,
-				   param->u.rid.data, param->u.rid.len, 0);
-	if (res >= 0) {
-		param->u.rid.len = res;
-		return 0;
-	}
-
-	return res;
-}
-
-
-static int prism2_ioctl_set_rid(local_info_t *local,
-				struct prism2_hostapd_param *param,
-				int param_len)
-{
-	int max_len;
-
-	max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN;
-	if (max_len < 0 || max_len < param->u.rid.len)
-		return -EINVAL;
-
-	return local->func->set_rid(local->dev, param->u.rid.rid,
-				    param->u.rid.data, param->u.rid.len);
-}
-
-
-static int prism2_ioctl_set_assoc_ap_addr(local_info_t *local,
-					  struct prism2_hostapd_param *param,
-					  int param_len)
-{
-	printk(KERN_DEBUG "%ssta: associated as client with AP %pM\n",
-	       local->dev->name, param->sta_addr);
-	memcpy(local->assoc_ap_addr, param->sta_addr, ETH_ALEN);
-	return 0;
-}
-
-
-static int prism2_ioctl_siwgenie(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct iw_point *data = &wrqu->data;
-	return prism2_set_genericelement(dev, extra, data->length);
-}
-
-
-static int prism2_ioctl_giwgenie(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct iw_point *data = &wrqu->data;
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-	int len = local->generic_elem_len - 2;
-
-	if (len <= 0 || local->generic_elem == NULL) {
-		data->length = 0;
-		return 0;
-	}
-
-	if (data->length < len)
-		return -E2BIG;
-
-	data->length = len;
-	memcpy(extra, local->generic_elem + 2, len);
-
-	return 0;
-}
-
-
-static int prism2_ioctl_set_generic_element(local_info_t *local,
-					    struct prism2_hostapd_param *param,
-					    int param_len)
-{
-	int max_len, len;
-
-	len = param->u.generic_elem.len;
-	max_len = param_len - PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN;
-	if (max_len < 0 || max_len < len)
-		return -EINVAL;
-
-	return prism2_set_genericelement(local->dev,
-					 param->u.generic_elem.data, len);
-}
-
-
-static int prism2_ioctl_siwmlme(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-	struct iw_mlme *mlme = (struct iw_mlme *) extra;
-	__le16 reason;
-
-	reason = cpu_to_le16(mlme->reason_code);
-
-	switch (mlme->cmd) {
-	case IW_MLME_DEAUTH:
-		return prism2_sta_send_mgmt(local, mlme->addr.sa_data,
-					    IEEE80211_STYPE_DEAUTH,
-					    (u8 *) &reason, 2);
-	case IW_MLME_DISASSOC:
-		return prism2_sta_send_mgmt(local, mlme->addr.sa_data,
-					    IEEE80211_STYPE_DISASSOC,
-					    (u8 *) &reason, 2);
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-
-static int prism2_ioctl_mlme(local_info_t *local,
-			     struct prism2_hostapd_param *param)
-{
-	__le16 reason;
-
-	reason = cpu_to_le16(param->u.mlme.reason_code);
-	switch (param->u.mlme.cmd) {
-	case MLME_STA_DEAUTH:
-		return prism2_sta_send_mgmt(local, param->sta_addr,
-					    IEEE80211_STYPE_DEAUTH,
-					    (u8 *) &reason, 2);
-	case MLME_STA_DISASSOC:
-		return prism2_sta_send_mgmt(local, param->sta_addr,
-					    IEEE80211_STYPE_DISASSOC,
-					    (u8 *) &reason, 2);
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-
-static int prism2_ioctl_scan_req(local_info_t *local,
-				 struct prism2_hostapd_param *param)
-{
-#ifndef PRISM2_NO_STATION_MODES
-	if ((local->iw_mode != IW_MODE_INFRA &&
-	     local->iw_mode != IW_MODE_ADHOC) ||
-	    (local->sta_fw_ver < PRISM2_FW_VER(1,3,1)))
-		return -EOPNOTSUPP;
-
-	if (!local->dev_enabled)
-		return -ENETDOWN;
-
-	return prism2_request_hostscan(local->dev, param->u.scan_req.ssid,
-				       param->u.scan_req.ssid_len);
-#else /* PRISM2_NO_STATION_MODES */
-	return -EOPNOTSUPP;
-#endif /* PRISM2_NO_STATION_MODES */
-}
-
-
-static int prism2_ioctl_priv_hostapd(local_info_t *local, struct iw_point *p)
-{
-	struct prism2_hostapd_param *param;
-	int ret = 0;
-	int ap_ioctl = 0;
-
-	if (p->length < sizeof(struct prism2_hostapd_param) ||
-	    p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer)
-		return -EINVAL;
-
-	param = memdup_user(p->pointer, p->length);
-	if (IS_ERR(param)) {
-		return PTR_ERR(param);
-	}
-
-	switch (param->cmd) {
-	case PRISM2_SET_ENCRYPTION:
-		ret = prism2_ioctl_set_encryption(local, param, p->length);
-		break;
-	case PRISM2_GET_ENCRYPTION:
-		ret = prism2_ioctl_get_encryption(local, param, p->length);
-		break;
-	case PRISM2_HOSTAPD_GET_RID:
-		ret = prism2_ioctl_get_rid(local, param, p->length);
-		break;
-	case PRISM2_HOSTAPD_SET_RID:
-		ret = prism2_ioctl_set_rid(local, param, p->length);
-		break;
-	case PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR:
-		ret = prism2_ioctl_set_assoc_ap_addr(local, param, p->length);
-		break;
-	case PRISM2_HOSTAPD_SET_GENERIC_ELEMENT:
-		ret = prism2_ioctl_set_generic_element(local, param,
-						       p->length);
-		break;
-	case PRISM2_HOSTAPD_MLME:
-		ret = prism2_ioctl_mlme(local, param);
-		break;
-	case PRISM2_HOSTAPD_SCAN_REQ:
-		ret = prism2_ioctl_scan_req(local, param);
-		break;
-	default:
-		ret = prism2_hostapd(local->ap, param);
-		ap_ioctl = 1;
-		break;
-	}
-
-	if (ret == 1 || !ap_ioctl) {
-		if (copy_to_user(p->pointer, param, p->length)) {
-			ret = -EFAULT;
-			goto out;
-		} else if (ap_ioctl)
-			ret = 0;
-	}
-
- out:
-	kfree(param);
-	return ret;
-}
-
-
-static void prism2_get_drvinfo(struct net_device *dev,
-			       struct ethtool_drvinfo *info)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	strscpy(info->driver, "hostap", sizeof(info->driver));
-	snprintf(info->fw_version, sizeof(info->fw_version),
-		 "%d.%d.%d", (local->sta_fw_ver >> 16) & 0xff,
-		 (local->sta_fw_ver >> 8) & 0xff,
-		 local->sta_fw_ver & 0xff);
-}
-
-const struct ethtool_ops prism2_ethtool_ops = {
-	.get_drvinfo = prism2_get_drvinfo
-};
-
-
-/* Structures to export the Wireless Handlers */
-
-static const iw_handler prism2_handler[] =
-{
-	IW_HANDLER(SIOCGIWNAME,		prism2_get_name),
-	IW_HANDLER(SIOCSIWFREQ,		prism2_ioctl_siwfreq),
-	IW_HANDLER(SIOCGIWFREQ,		prism2_ioctl_giwfreq),
-	IW_HANDLER(SIOCSIWMODE,		prism2_ioctl_siwmode),
-	IW_HANDLER(SIOCGIWMODE,		prism2_ioctl_giwmode),
-	IW_HANDLER(SIOCSIWSENS,		prism2_ioctl_siwsens),
-	IW_HANDLER(SIOCGIWSENS,		prism2_ioctl_giwsens),
-	IW_HANDLER(SIOCGIWRANGE,	prism2_ioctl_giwrange),
-	IW_HANDLER(SIOCSIWSPY,		iw_handler_set_spy),
-	IW_HANDLER(SIOCGIWSPY,		iw_handler_get_spy),
-	IW_HANDLER(SIOCSIWTHRSPY,	iw_handler_set_thrspy),
-	IW_HANDLER(SIOCGIWTHRSPY,	iw_handler_get_thrspy),
-	IW_HANDLER(SIOCSIWAP,		prism2_ioctl_siwap),
-	IW_HANDLER(SIOCGIWAP,		prism2_ioctl_giwap),
-	IW_HANDLER(SIOCSIWMLME,		prism2_ioctl_siwmlme),
-	IW_HANDLER(SIOCGIWAPLIST,       prism2_ioctl_giwaplist),
-	IW_HANDLER(SIOCSIWSCAN,		prism2_ioctl_siwscan),
-	IW_HANDLER(SIOCGIWSCAN,		prism2_ioctl_giwscan),
-	IW_HANDLER(SIOCSIWESSID,        prism2_ioctl_siwessid),
-	IW_HANDLER(SIOCGIWESSID,        prism2_ioctl_giwessid),
-	IW_HANDLER(SIOCSIWNICKN,        prism2_ioctl_siwnickn),
-	IW_HANDLER(SIOCGIWNICKN,        prism2_ioctl_giwnickn),
-	IW_HANDLER(SIOCSIWRATE,		prism2_ioctl_siwrate),
-	IW_HANDLER(SIOCGIWRATE,		prism2_ioctl_giwrate),
-	IW_HANDLER(SIOCSIWRTS,		prism2_ioctl_siwrts),
-	IW_HANDLER(SIOCGIWRTS,		prism2_ioctl_giwrts),
-	IW_HANDLER(SIOCSIWFRAG,		prism2_ioctl_siwfrag),
-	IW_HANDLER(SIOCGIWFRAG,		prism2_ioctl_giwfrag),
-	IW_HANDLER(SIOCSIWTXPOW,        prism2_ioctl_siwtxpow),
-	IW_HANDLER(SIOCGIWTXPOW,        prism2_ioctl_giwtxpow),
-	IW_HANDLER(SIOCSIWRETRY,        prism2_ioctl_siwretry),
-	IW_HANDLER(SIOCGIWRETRY,        prism2_ioctl_giwretry),
-	IW_HANDLER(SIOCSIWENCODE,       prism2_ioctl_siwencode),
-	IW_HANDLER(SIOCGIWENCODE,       prism2_ioctl_giwencode),
-	IW_HANDLER(SIOCSIWPOWER,        prism2_ioctl_siwpower),
-	IW_HANDLER(SIOCGIWPOWER,        prism2_ioctl_giwpower),
-	IW_HANDLER(SIOCSIWGENIE,        prism2_ioctl_siwgenie),
-	IW_HANDLER(SIOCGIWGENIE,        prism2_ioctl_giwgenie),
-	IW_HANDLER(SIOCSIWAUTH,		prism2_ioctl_siwauth),
-	IW_HANDLER(SIOCGIWAUTH,		prism2_ioctl_giwauth),
-	IW_HANDLER(SIOCSIWENCODEEXT,    prism2_ioctl_siwencodeext),
-	IW_HANDLER(SIOCGIWENCODEEXT,    prism2_ioctl_giwencodeext),
-};
-
-static const iw_handler prism2_private_handler[] =
-{						/* SIOCIWFIRSTPRIV + */
-	prism2_ioctl_priv_prism2_param,		/* 0 */
-	prism2_ioctl_priv_get_prism2_param,	/* 1 */
-	prism2_ioctl_priv_writemif,		/* 2 */
-	prism2_ioctl_priv_readmif,		/* 3 */
-};
-
-const struct iw_handler_def hostap_iw_handler_def =
-{
-	.num_standard	= ARRAY_SIZE(prism2_handler),
-	.num_private	= ARRAY_SIZE(prism2_private_handler),
-	.num_private_args = ARRAY_SIZE(prism2_priv),
-	.standard	= prism2_handler,
-	.private	= prism2_private_handler,
-	.private_args	= (struct iw_priv_args *) prism2_priv,
-	.get_wireless_stats = hostap_get_wireless_stats,
-};
-
-
-/* Private ioctls that are not used with iwpriv;
- * in SIOCDEVPRIVATE range */
-int hostap_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
-			  void __user *data, int cmd)
-{
-	struct iwreq *wrq = (struct iwreq *)ifr;
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int ret = 0;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (in_compat_syscall()) /* not implemented yet */
-		return -EOPNOTSUPP;
-
-	switch (cmd) {
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-	case PRISM2_IOCTL_DOWNLOAD:
-		if (!capable(CAP_NET_ADMIN)) ret = -EPERM;
-		else ret = prism2_ioctl_priv_download(local, &wrq->u.data);
-		break;
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-
-	case PRISM2_IOCTL_HOSTAPD:
-		if (!capable(CAP_NET_ADMIN)) ret = -EPERM;
-		else ret = prism2_ioctl_priv_hostapd(local, &wrq->u.data);
-		break;
-
-	default:
-		ret = -EOPNOTSUPP;
-		break;
-	}
-
-	return ret;
-}
diff --git a/drivers/net/wireless/intersil/hostap/hostap_main.c b/drivers/net/wireless/intersil/hostap/hostap_main.c
deleted file mode 100644
index bf86ac26c2..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_main.c
+++ /dev/null
@@ -1,1123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Host AP (software wireless LAN access point) driver for
- * Intersil Prism2/2.5/3 - hostap.o module, common routines
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <j@w1.fi>
- * Copyright (c) 2002-2005, Jouni Malinen <j@w1.fi>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/if_arp.h>
-#include <linux/delay.h>
-#include <linux/random.h>
-#include <linux/workqueue.h>
-#include <linux/kmod.h>
-#include <linux/rtnetlink.h>
-#include <linux/wireless.h>
-#include <linux/etherdevice.h>
-#include <net/net_namespace.h>
-#include <net/iw_handler.h>
-#include <net/lib80211.h>
-#include <linux/uaccess.h>
-
-#include "hostap_wlan.h"
-#include "hostap_80211.h"
-#include "hostap_ap.h"
-#include "hostap.h"
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Host AP common routines");
-MODULE_LICENSE("GPL");
-
-#define TX_TIMEOUT (2 * HZ)
-
-#define PRISM2_MAX_FRAME_SIZE 2304
-#define PRISM2_MIN_MTU 256
-/* FIX: */
-#define PRISM2_MAX_MTU (PRISM2_MAX_FRAME_SIZE - (6 /* LLC */ + 8 /* WEP */))
-
-
-struct net_device * hostap_add_interface(struct local_info *local,
-					 int type, int rtnl_locked,
-					 const char *prefix,
-					 const char *name)
-{
-	struct net_device *dev, *mdev;
-	struct hostap_interface *iface;
-	int ret;
-
-	dev = alloc_etherdev(sizeof(struct hostap_interface));
-	if (dev == NULL)
-		return NULL;
-
-	iface = netdev_priv(dev);
-	iface->dev = dev;
-	iface->local = local;
-	iface->type = type;
-	list_add(&iface->list, &local->hostap_interfaces);
-
-	mdev = local->dev;
-	eth_hw_addr_inherit(dev, mdev);
-	dev->base_addr = mdev->base_addr;
-	dev->irq = mdev->irq;
-	dev->mem_start = mdev->mem_start;
-	dev->mem_end = mdev->mem_end;
-
-	hostap_setup_dev(dev, local, type);
-	dev->needs_free_netdev = true;
-
-	sprintf(dev->name, "%s%s", prefix, name);
-	if (!rtnl_locked)
-		rtnl_lock();
-
-	SET_NETDEV_DEV(dev, mdev->dev.parent);
-	ret = register_netdevice(dev);
-
-	if (!rtnl_locked)
-		rtnl_unlock();
-
-	if (ret < 0) {
-		printk(KERN_WARNING "%s: failed to add new netdevice!\n",
-		       dev->name);
-		free_netdev(dev);
-		return NULL;
-	}
-
-	printk(KERN_DEBUG "%s: registered netdevice %s\n",
-	       mdev->name, dev->name);
-
-	return dev;
-}
-
-
-void hostap_remove_interface(struct net_device *dev, int rtnl_locked,
-			     int remove_from_list)
-{
-	struct hostap_interface *iface;
-
-	if (!dev)
-		return;
-
-	iface = netdev_priv(dev);
-
-	if (remove_from_list) {
-		list_del(&iface->list);
-	}
-
-	if (dev == iface->local->ddev)
-		iface->local->ddev = NULL;
-	else if (dev == iface->local->apdev)
-		iface->local->apdev = NULL;
-	else if (dev == iface->local->stadev)
-		iface->local->stadev = NULL;
-
-	if (rtnl_locked)
-		unregister_netdevice(dev);
-	else
-		unregister_netdev(dev);
-
-	/* 'dev->needs_free_netdev = true' implies device data, including
-	 * private data, will be freed when the device is removed */
-}
-
-
-static inline int prism2_wds_special_addr(u8 *addr)
-{
-	if (addr[0] || addr[1] || addr[2] || addr[3] || addr[4] || addr[5])
-		return 0;
-
-	return 1;
-}
-
-
-int prism2_wds_add(local_info_t *local, u8 *remote_addr,
-		   int rtnl_locked)
-{
-	struct net_device *dev;
-	struct list_head *ptr;
-	struct hostap_interface *iface, *empty, *match;
-
-	empty = match = NULL;
-	read_lock_bh(&local->iface_lock);
-	list_for_each(ptr, &local->hostap_interfaces) {
-		iface = list_entry(ptr, struct hostap_interface, list);
-		if (iface->type != HOSTAP_INTERFACE_WDS)
-			continue;
-
-		if (prism2_wds_special_addr(iface->u.wds.remote_addr))
-			empty = iface;
-		else if (ether_addr_equal(iface->u.wds.remote_addr, remote_addr)) {
-			match = iface;
-			break;
-		}
-	}
-	if (!match && empty && !prism2_wds_special_addr(remote_addr)) {
-		/* take pre-allocated entry into use */
-		memcpy(empty->u.wds.remote_addr, remote_addr, ETH_ALEN);
-		read_unlock_bh(&local->iface_lock);
-		printk(KERN_DEBUG "%s: using pre-allocated WDS netdevice %s\n",
-		       local->dev->name, empty->dev->name);
-		return 0;
-	}
-	read_unlock_bh(&local->iface_lock);
-
-	if (!prism2_wds_special_addr(remote_addr)) {
-		if (match)
-			return -EEXIST;
-		hostap_add_sta(local->ap, remote_addr);
-	}
-
-	if (local->wds_connections >= local->wds_max_connections)
-		return -ENOBUFS;
-
-	/* verify that there is room for wds# postfix in the interface name */
-	if (strlen(local->dev->name) >= IFNAMSIZ - 5) {
-		printk(KERN_DEBUG "'%s' too long base device name\n",
-		       local->dev->name);
-		return -EINVAL;
-	}
-
-	dev = hostap_add_interface(local, HOSTAP_INTERFACE_WDS, rtnl_locked,
-				   local->ddev->name, "wds%d");
-	if (dev == NULL)
-		return -ENOMEM;
-
-	iface = netdev_priv(dev);
-	memcpy(iface->u.wds.remote_addr, remote_addr, ETH_ALEN);
-
-	local->wds_connections++;
-
-	return 0;
-}
-
-
-int prism2_wds_del(local_info_t *local, u8 *remote_addr,
-		   int rtnl_locked, int do_not_remove)
-{
-	unsigned long flags;
-	struct list_head *ptr;
-	struct hostap_interface *iface, *selected = NULL;
-
-	write_lock_irqsave(&local->iface_lock, flags);
-	list_for_each(ptr, &local->hostap_interfaces) {
-		iface = list_entry(ptr, struct hostap_interface, list);
-		if (iface->type != HOSTAP_INTERFACE_WDS)
-			continue;
-
-		if (ether_addr_equal(iface->u.wds.remote_addr, remote_addr)) {
-			selected = iface;
-			break;
-		}
-	}
-	if (selected && !do_not_remove)
-		list_del(&selected->list);
-	write_unlock_irqrestore(&local->iface_lock, flags);
-
-	if (selected) {
-		if (do_not_remove)
-			eth_zero_addr(selected->u.wds.remote_addr);
-		else {
-			hostap_remove_interface(selected->dev, rtnl_locked, 0);
-			local->wds_connections--;
-		}
-	}
-
-	return selected ? 0 : -ENODEV;
-}
-
-
-u16 hostap_tx_callback_register(local_info_t *local,
-				void (*func)(struct sk_buff *, int ok, void *),
-				void *data)
-{
-	unsigned long flags;
-	struct hostap_tx_callback_info *entry;
-
-	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
-	if (entry == NULL)
-		return 0;
-
-	entry->func = func;
-	entry->data = data;
-
-	spin_lock_irqsave(&local->lock, flags);
-	entry->idx = local->tx_callback ? local->tx_callback->idx + 1 : 1;
-	entry->next = local->tx_callback;
-	local->tx_callback = entry;
-	spin_unlock_irqrestore(&local->lock, flags);
-
-	return entry->idx;
-}
-
-
-int hostap_tx_callback_unregister(local_info_t *local, u16 idx)
-{
-	unsigned long flags;
-	struct hostap_tx_callback_info *cb, *prev = NULL;
-
-	spin_lock_irqsave(&local->lock, flags);
-	cb = local->tx_callback;
-	while (cb != NULL && cb->idx != idx) {
-		prev = cb;
-		cb = cb->next;
-	}
-	if (cb) {
-		if (prev == NULL)
-			local->tx_callback = cb->next;
-		else
-			prev->next = cb->next;
-		kfree(cb);
-	}
-	spin_unlock_irqrestore(&local->lock, flags);
-
-	return cb ? 0 : -1;
-}
-
-
-/* val is in host byte order */
-int hostap_set_word(struct net_device *dev, int rid, u16 val)
-{
-	struct hostap_interface *iface;
-	__le16 tmp = cpu_to_le16(val);
-	iface = netdev_priv(dev);
-	return iface->local->func->set_rid(dev, rid, &tmp, 2);
-}
-
-
-int hostap_set_string(struct net_device *dev, int rid, const char *val)
-{
-	struct hostap_interface *iface;
-	char buf[MAX_SSID_LEN + 2];
-	int len;
-
-	iface = netdev_priv(dev);
-	len = strlen(val);
-	if (len > MAX_SSID_LEN)
-		return -1;
-	memset(buf, 0, sizeof(buf));
-	buf[0] = len; /* little endian 16 bit word */
-	memcpy(buf + 2, val, len);
-
-	return iface->local->func->set_rid(dev, rid, &buf, MAX_SSID_LEN + 2);
-}
-
-
-u16 hostap_get_porttype(local_info_t *local)
-{
-	if (local->iw_mode == IW_MODE_ADHOC && local->pseudo_adhoc)
-		return HFA384X_PORTTYPE_PSEUDO_IBSS;
-	if (local->iw_mode == IW_MODE_ADHOC)
-		return HFA384X_PORTTYPE_IBSS;
-	if (local->iw_mode == IW_MODE_INFRA)
-		return HFA384X_PORTTYPE_BSS;
-	if (local->iw_mode == IW_MODE_REPEAT)
-		return HFA384X_PORTTYPE_WDS;
-	if (local->iw_mode == IW_MODE_MONITOR)
-		return HFA384X_PORTTYPE_PSEUDO_IBSS;
-	return HFA384X_PORTTYPE_HOSTAP;
-}
-
-
-int hostap_set_encryption(local_info_t *local)
-{
-	u16 val, old_val;
-	int i, keylen, len, idx;
-	char keybuf[WEP_KEY_LEN + 1];
-	enum { NONE, WEP, OTHER } encrypt_type;
-
-	idx = local->crypt_info.tx_keyidx;
-	if (local->crypt_info.crypt[idx] == NULL ||
-	    local->crypt_info.crypt[idx]->ops == NULL)
-		encrypt_type = NONE;
-	else if (strcmp(local->crypt_info.crypt[idx]->ops->name, "WEP") == 0)
-		encrypt_type = WEP;
-	else
-		encrypt_type = OTHER;
-
-	if (local->func->get_rid(local->dev, HFA384X_RID_CNFWEPFLAGS, &val, 2,
-				 1) < 0) {
-		printk(KERN_DEBUG "Could not read current WEP flags.\n");
-		goto fail;
-	}
-	le16_to_cpus(&val);
-	old_val = val;
-
-	if (encrypt_type != NONE || local->privacy_invoked)
-		val |= HFA384X_WEPFLAGS_PRIVACYINVOKED;
-	else
-		val &= ~HFA384X_WEPFLAGS_PRIVACYINVOKED;
-
-	if (local->open_wep || encrypt_type == NONE ||
-	    ((local->ieee_802_1x || local->wpa) && local->host_decrypt))
-		val &= ~HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED;
-	else
-		val |= HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED;
-
-	if ((encrypt_type != NONE || local->privacy_invoked) &&
-	    (encrypt_type == OTHER || local->host_encrypt))
-		val |= HFA384X_WEPFLAGS_HOSTENCRYPT;
-	else
-		val &= ~HFA384X_WEPFLAGS_HOSTENCRYPT;
-	if ((encrypt_type != NONE || local->privacy_invoked) &&
-	    (encrypt_type == OTHER || local->host_decrypt))
-		val |= HFA384X_WEPFLAGS_HOSTDECRYPT;
-	else
-		val &= ~HFA384X_WEPFLAGS_HOSTDECRYPT;
-
-	if (val != old_val &&
-	    hostap_set_word(local->dev, HFA384X_RID_CNFWEPFLAGS, val)) {
-		printk(KERN_DEBUG "Could not write new WEP flags (0x%x)\n",
-		       val);
-		goto fail;
-	}
-
-	if (encrypt_type != WEP)
-		return 0;
-
-	/* 104-bit support seems to require that all the keys are set to the
-	 * same keylen */
-	keylen = 6; /* first 5 octets */
-	len = local->crypt_info.crypt[idx]->ops->get_key(keybuf, sizeof(keybuf), NULL,
-							   local->crypt_info.crypt[idx]->priv);
-	if (idx >= 0 && idx < WEP_KEYS && len > 5)
-		keylen = WEP_KEY_LEN + 1; /* first 13 octets */
-
-	for (i = 0; i < WEP_KEYS; i++) {
-		memset(keybuf, 0, sizeof(keybuf));
-		if (local->crypt_info.crypt[i]) {
-			(void) local->crypt_info.crypt[i]->ops->get_key(
-				keybuf, sizeof(keybuf),
-				NULL, local->crypt_info.crypt[i]->priv);
-		}
-		if (local->func->set_rid(local->dev,
-					 HFA384X_RID_CNFDEFAULTKEY0 + i,
-					 keybuf, keylen)) {
-			printk(KERN_DEBUG "Could not set key %d (len=%d)\n",
-			       i, keylen);
-			goto fail;
-		}
-	}
-	if (hostap_set_word(local->dev, HFA384X_RID_CNFWEPDEFAULTKEYID, idx)) {
-		printk(KERN_DEBUG "Could not set default keyid %d\n", idx);
-		goto fail;
-	}
-
-	return 0;
-
- fail:
-	printk(KERN_DEBUG "%s: encryption setup failed\n", local->dev->name);
-	return -1;
-}
-
-
-int hostap_set_antsel(local_info_t *local)
-{
-	u16 val;
-	int ret = 0;
-
-	if (local->antsel_tx != HOSTAP_ANTSEL_DO_NOT_TOUCH &&
-	    local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF,
-			     HFA386X_CR_TX_CONFIGURE,
-			     NULL, &val) == 0) {
-		val &= ~(BIT(2) | BIT(1));
-		switch (local->antsel_tx) {
-		case HOSTAP_ANTSEL_DIVERSITY:
-			val |= BIT(1);
-			break;
-		case HOSTAP_ANTSEL_LOW:
-			break;
-		case HOSTAP_ANTSEL_HIGH:
-			val |= BIT(2);
-			break;
-		}
-
-		if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF,
-				     HFA386X_CR_TX_CONFIGURE, &val, NULL)) {
-			printk(KERN_INFO "%s: setting TX AntSel failed\n",
-			       local->dev->name);
-			ret = -1;
-		}
-	}
-
-	if (local->antsel_rx != HOSTAP_ANTSEL_DO_NOT_TOUCH &&
-	    local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF,
-			     HFA386X_CR_RX_CONFIGURE,
-			     NULL, &val) == 0) {
-		val &= ~(BIT(1) | BIT(0));
-		switch (local->antsel_rx) {
-		case HOSTAP_ANTSEL_DIVERSITY:
-			break;
-		case HOSTAP_ANTSEL_LOW:
-			val |= BIT(0);
-			break;
-		case HOSTAP_ANTSEL_HIGH:
-			val |= BIT(0) | BIT(1);
-			break;
-		}
-
-		if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF,
-				     HFA386X_CR_RX_CONFIGURE, &val, NULL)) {
-			printk(KERN_INFO "%s: setting RX AntSel failed\n",
-			       local->dev->name);
-			ret = -1;
-		}
-	}
-
-	return ret;
-}
-
-
-int hostap_set_roaming(local_info_t *local)
-{
-	u16 val;
-
-	switch (local->host_roaming) {
-	case 1:
-		val = HFA384X_ROAMING_HOST;
-		break;
-	case 2:
-		val = HFA384X_ROAMING_DISABLED;
-		break;
-	case 0:
-	default:
-		val = HFA384X_ROAMING_FIRMWARE;
-		break;
-	}
-
-	return hostap_set_word(local->dev, HFA384X_RID_CNFROAMINGMODE, val);
-}
-
-
-int hostap_set_auth_algs(local_info_t *local)
-{
-	int val = local->auth_algs;
-	/* At least STA f/w v0.6.2 seems to have issues with cnfAuthentication
-	 * set to include both Open and Shared Key flags. It tries to use
-	 * Shared Key authentication in that case even if WEP keys are not
-	 * configured.. STA f/w v0.7.6 is able to handle such configuration,
-	 * but it is unknown when this was fixed between 0.6.2 .. 0.7.6. */
-	if (local->sta_fw_ver < PRISM2_FW_VER(0,7,0) &&
-	    val != PRISM2_AUTH_OPEN && val != PRISM2_AUTH_SHARED_KEY)
-		val = PRISM2_AUTH_OPEN;
-
-	if (hostap_set_word(local->dev, HFA384X_RID_CNFAUTHENTICATION, val)) {
-		printk(KERN_INFO "%s: cnfAuthentication setting to 0x%x "
-		       "failed\n", local->dev->name, local->auth_algs);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-
-void hostap_dump_rx_header(const char *name, const struct hfa384x_rx_frame *rx)
-{
-	u16 status, fc;
-
-	status = __le16_to_cpu(rx->status);
-
-	printk(KERN_DEBUG "%s: RX status=0x%04x (port=%d, type=%d, "
-	       "fcserr=%d) silence=%d signal=%d rate=%d rxflow=%d; "
-	       "jiffies=%ld\n",
-	       name, status, (status >> 8) & 0x07, status >> 13, status & 1,
-	       rx->silence, rx->signal, rx->rate, rx->rxflow, jiffies);
-
-	fc = __le16_to_cpu(rx->frame_control);
-	printk(KERN_DEBUG "   FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x "
-	       "data_len=%d%s%s\n",
-	       fc, (fc & IEEE80211_FCTL_FTYPE) >> 2,
-	       (fc & IEEE80211_FCTL_STYPE) >> 4,
-	       __le16_to_cpu(rx->duration_id), __le16_to_cpu(rx->seq_ctrl),
-	       __le16_to_cpu(rx->data_len),
-	       fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "",
-	       fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : "");
-
-	printk(KERN_DEBUG "   A1=%pM A2=%pM A3=%pM A4=%pM\n",
-	       rx->addr1, rx->addr2, rx->addr3, rx->addr4);
-
-	printk(KERN_DEBUG "   dst=%pM src=%pM len=%d\n",
-	       rx->dst_addr, rx->src_addr,
-	       __be16_to_cpu(rx->len));
-}
-
-
-void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx)
-{
-	u16 fc;
-
-	printk(KERN_DEBUG "%s: TX status=0x%04x retry_count=%d tx_rate=%d "
-	       "tx_control=0x%04x; jiffies=%ld\n",
-	       name, __le16_to_cpu(tx->status), tx->retry_count, tx->tx_rate,
-	       __le16_to_cpu(tx->tx_control), jiffies);
-
-	fc = __le16_to_cpu(tx->frame_control);
-	printk(KERN_DEBUG "   FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x "
-	       "data_len=%d%s%s\n",
-	       fc, (fc & IEEE80211_FCTL_FTYPE) >> 2,
-	       (fc & IEEE80211_FCTL_STYPE) >> 4,
-	       __le16_to_cpu(tx->duration_id), __le16_to_cpu(tx->seq_ctrl),
-	       __le16_to_cpu(tx->data_len),
-	       fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "",
-	       fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : "");
-
-	printk(KERN_DEBUG "   A1=%pM A2=%pM A3=%pM A4=%pM\n",
-	       tx->addr1, tx->addr2, tx->addr3, tx->addr4);
-
-	printk(KERN_DEBUG "   dst=%pM src=%pM len=%d\n",
-	       tx->dst_addr, tx->src_addr,
-	       __be16_to_cpu(tx->len));
-}
-
-
-static int hostap_80211_header_parse(const struct sk_buff *skb,
-				     unsigned char *haddr)
-{
-	memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
-	return ETH_ALEN;
-}
-
-
-int hostap_80211_get_hdrlen(__le16 fc)
-{
-	if (ieee80211_is_data(fc) && ieee80211_has_a4 (fc))
-		return 30; /* Addr4 */
-	else if (ieee80211_is_cts(fc) || ieee80211_is_ack(fc))
-		return 10;
-	else if (ieee80211_is_ctl(fc))
-		return 16;
-
-	return 24;
-}
-
-
-static int prism2_close(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	PDEBUG(DEBUG_FLOW, "%s: prism2_close\n", dev->name);
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (dev == local->ddev) {
-		prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING);
-	}
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	if (!local->hostapd && dev == local->dev &&
-	    (!local->func->card_present || local->func->card_present(local)) &&
-	    local->hw_ready && local->ap && local->iw_mode == IW_MODE_MASTER)
-		hostap_deauth_all_stas(dev, local->ap, 1);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-	if (dev == local->dev) {
-		local->func->hw_shutdown(dev, HOSTAP_HW_ENABLE_CMDCOMPL);
-	}
-
-	if (netif_running(dev)) {
-		netif_stop_queue(dev);
-		netif_device_detach(dev);
-	}
-
-	cancel_work_sync(&local->reset_queue);
-	cancel_work_sync(&local->set_multicast_list_queue);
-	cancel_work_sync(&local->set_tim_queue);
-#ifndef PRISM2_NO_STATION_MODES
-	cancel_work_sync(&local->info_queue);
-#endif
-	cancel_work_sync(&local->comms_qual_update);
-
-	module_put(local->hw_module);
-
-	local->num_dev_open--;
-
-	if (dev != local->dev && local->dev->flags & IFF_UP &&
-	    local->master_dev_auto_open && local->num_dev_open == 1) {
-		/* Close master radio interface automatically if it was also
-		 * opened automatically and we are now closing the last
-		 * remaining non-master device. */
-		dev_close(local->dev);
-	}
-
-	return 0;
-}
-
-
-static int prism2_open(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	PDEBUG(DEBUG_FLOW, "%s: prism2_open\n", dev->name);
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->no_pri) {
-		printk(KERN_DEBUG "%s: could not set interface UP - no PRI "
-		       "f/w\n", dev->name);
-		return -ENODEV;
-	}
-
-	if ((local->func->card_present && !local->func->card_present(local)) ||
-	    local->hw_downloading)
-		return -ENODEV;
-
-	if (!try_module_get(local->hw_module))
-		return -ENODEV;
-	local->num_dev_open++;
-
-	if (!local->dev_enabled && local->func->hw_enable(dev, 1)) {
-		printk(KERN_WARNING "%s: could not enable MAC port\n",
-		       dev->name);
-		prism2_close(dev);
-		return -ENODEV;
-	}
-	if (!local->dev_enabled)
-		prism2_callback(local, PRISM2_CALLBACK_ENABLE);
-	local->dev_enabled = 1;
-
-	if (dev != local->dev && !(local->dev->flags & IFF_UP)) {
-		/* Master radio interface is needed for all operation, so open
-		 * it automatically when any virtual net_device is opened. */
-		local->master_dev_auto_open = 1;
-		dev_open(local->dev, NULL);
-	}
-
-	netif_device_attach(dev);
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-
-static int prism2_set_mac_address(struct net_device *dev, void *p)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct list_head *ptr;
-	struct sockaddr *addr = p;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	if (local->func->set_rid(dev, HFA384X_RID_CNFOWNMACADDR, addr->sa_data,
-				 ETH_ALEN) < 0 || local->func->reset_port(dev))
-		return -EINVAL;
-
-	read_lock_bh(&local->iface_lock);
-	list_for_each(ptr, &local->hostap_interfaces) {
-		iface = list_entry(ptr, struct hostap_interface, list);
-		eth_hw_addr_set(iface->dev, addr->sa_data);
-	}
-	eth_hw_addr_set(local->dev, addr->sa_data);
-	read_unlock_bh(&local->iface_lock);
-
-	return 0;
-}
-
-
-/* TODO: to be further implemented as soon as Prism2 fully supports
- *       GroupAddresses and correct documentation is available */
-void hostap_set_multicast_list_queue(struct work_struct *work)
-{
-	local_info_t *local =
-		container_of(work, local_info_t, set_multicast_list_queue);
-	struct net_device *dev = local->dev;
-
-	if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE,
-			    local->is_promisc)) {
-		printk(KERN_INFO "%s: %sabling promiscuous mode failed\n",
-		       dev->name, local->is_promisc ? "en" : "dis");
-	}
-}
-
-
-static void hostap_set_multicast_list(struct net_device *dev)
-{
-#if 0
-	/* FIX: promiscuous mode seems to be causing a lot of problems with
-	 * some station firmware versions (FCSErr frames, invalid MACPort, etc.
-	 * corrupted incoming frames). This code is now commented out while the
-	 * problems are investigated. */
-	struct hostap_interface *iface;
-	local_info_t *local;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	if ((dev->flags & IFF_ALLMULTI) || (dev->flags & IFF_PROMISC)) {
-		local->is_promisc = 1;
-	} else {
-		local->is_promisc = 0;
-	}
-
-	schedule_work(&local->set_multicast_list_queue);
-#endif
-}
-
-
-static void prism2_tx_timeout(struct net_device *dev, unsigned int txqueue)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	struct hfa384x_regs regs;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	printk(KERN_WARNING "%s Tx timed out! Resetting card\n", dev->name);
-	netif_stop_queue(local->dev);
-
-	local->func->read_regs(dev, &regs);
-	printk(KERN_DEBUG "%s: CMD=%04x EVSTAT=%04x "
-	       "OFFSET0=%04x OFFSET1=%04x SWSUPPORT0=%04x\n",
-	       dev->name, regs.cmd, regs.evstat, regs.offset0, regs.offset1,
-	       regs.swsupport0);
-
-	local->func->schedule_reset(local);
-}
-
-const struct header_ops hostap_80211_ops = {
-	.create		= eth_header,
-	.cache		= eth_header_cache,
-	.cache_update	= eth_header_cache_update,
-	.parse		= hostap_80211_header_parse,
-};
-EXPORT_SYMBOL(hostap_80211_ops);
-
-
-static const struct net_device_ops hostap_netdev_ops = {
-	.ndo_start_xmit		= hostap_data_start_xmit,
-
-	.ndo_open		= prism2_open,
-	.ndo_stop		= prism2_close,
-	.ndo_siocdevprivate	= hostap_siocdevprivate,
-	.ndo_set_mac_address	= prism2_set_mac_address,
-	.ndo_set_rx_mode	= hostap_set_multicast_list,
-	.ndo_tx_timeout 	= prism2_tx_timeout,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static const struct net_device_ops hostap_mgmt_netdev_ops = {
-	.ndo_start_xmit		= hostap_mgmt_start_xmit,
-
-	.ndo_open		= prism2_open,
-	.ndo_stop		= prism2_close,
-	.ndo_siocdevprivate	= hostap_siocdevprivate,
-	.ndo_set_mac_address	= prism2_set_mac_address,
-	.ndo_set_rx_mode	= hostap_set_multicast_list,
-	.ndo_tx_timeout 	= prism2_tx_timeout,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static const struct net_device_ops hostap_master_ops = {
-	.ndo_start_xmit 	= hostap_master_start_xmit,
-
-	.ndo_open		= prism2_open,
-	.ndo_stop		= prism2_close,
-	.ndo_siocdevprivate	= hostap_siocdevprivate,
-	.ndo_set_mac_address	= prism2_set_mac_address,
-	.ndo_set_rx_mode	= hostap_set_multicast_list,
-	.ndo_tx_timeout 	= prism2_tx_timeout,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-void hostap_setup_dev(struct net_device *dev, local_info_t *local,
-		      int type)
-{
-	struct hostap_interface *iface;
-
-	iface = netdev_priv(dev);
-	ether_setup(dev);
-	dev->min_mtu = PRISM2_MIN_MTU;
-	dev->max_mtu = PRISM2_MAX_MTU;
-	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
-
-	/* kernel callbacks */
-	if (iface) {
-		/* Currently, we point to the proper spy_data only on
-		 * the main_dev. This could be fixed. Jean II */
-		iface->wireless_data.spy_data = &iface->spy_data;
-		dev->wireless_data = &iface->wireless_data;
-	}
-	dev->wireless_handlers = &hostap_iw_handler_def;
-	dev->watchdog_timeo = TX_TIMEOUT;
-
-	switch(type) {
-	case HOSTAP_INTERFACE_AP:
-		dev->priv_flags |= IFF_NO_QUEUE;	/* use main radio device queue */
-		dev->netdev_ops = &hostap_mgmt_netdev_ops;
-		dev->type = ARPHRD_IEEE80211;
-		dev->header_ops = &hostap_80211_ops;
-		break;
-	case HOSTAP_INTERFACE_MASTER:
-		dev->netdev_ops = &hostap_master_ops;
-		break;
-	default:
-		dev->priv_flags |= IFF_NO_QUEUE;	/* use main radio device queue */
-		dev->netdev_ops = &hostap_netdev_ops;
-	}
-
-	dev->mtu = local->mtu;
-
-
-	dev->ethtool_ops = &prism2_ethtool_ops;
-
-}
-
-static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked)
-{
-	struct net_device *dev = local->dev;
-
-	if (local->apdev)
-		return -EEXIST;
-
-	printk(KERN_DEBUG "%s: enabling hostapd mode\n", dev->name);
-
-	local->apdev = hostap_add_interface(local, HOSTAP_INTERFACE_AP,
-					    rtnl_locked, local->ddev->name,
-					    "ap");
-	if (local->apdev == NULL)
-		return -ENOMEM;
-
-	return 0;
-}
-
-
-static int hostap_disable_hostapd(local_info_t *local, int rtnl_locked)
-{
-	struct net_device *dev = local->dev;
-
-	printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name);
-
-	hostap_remove_interface(local->apdev, rtnl_locked, 1);
-	local->apdev = NULL;
-
-	return 0;
-}
-
-
-static int hostap_enable_hostapd_sta(local_info_t *local, int rtnl_locked)
-{
-	struct net_device *dev = local->dev;
-
-	if (local->stadev)
-		return -EEXIST;
-
-	printk(KERN_DEBUG "%s: enabling hostapd STA mode\n", dev->name);
-
-	local->stadev = hostap_add_interface(local, HOSTAP_INTERFACE_STA,
-					     rtnl_locked, local->ddev->name,
-					     "sta");
-	if (local->stadev == NULL)
-		return -ENOMEM;
-
-	return 0;
-}
-
-
-static int hostap_disable_hostapd_sta(local_info_t *local, int rtnl_locked)
-{
-	struct net_device *dev = local->dev;
-
-	printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name);
-
-	hostap_remove_interface(local->stadev, rtnl_locked, 1);
-	local->stadev = NULL;
-
-	return 0;
-}
-
-
-int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked)
-{
-	int ret;
-
-	if (val < 0 || val > 1)
-		return -EINVAL;
-
-	if (local->hostapd == val)
-		return 0;
-
-	if (val) {
-		ret = hostap_enable_hostapd(local, rtnl_locked);
-		if (ret == 0)
-			local->hostapd = 1;
-	} else {
-		local->hostapd = 0;
-		ret = hostap_disable_hostapd(local, rtnl_locked);
-		if (ret != 0)
-			local->hostapd = 1;
-	}
-
-	return ret;
-}
-
-
-int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked)
-{
-	int ret;
-
-	if (val < 0 || val > 1)
-		return -EINVAL;
-
-	if (local->hostapd_sta == val)
-		return 0;
-
-	if (val) {
-		ret = hostap_enable_hostapd_sta(local, rtnl_locked);
-		if (ret == 0)
-			local->hostapd_sta = 1;
-	} else {
-		local->hostapd_sta = 0;
-		ret = hostap_disable_hostapd_sta(local, rtnl_locked);
-		if (ret != 0)
-			local->hostapd_sta = 1;
-	}
-
-
-	return ret;
-}
-
-
-int prism2_update_comms_qual(struct net_device *dev)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	int ret = 0;
-	struct hfa384x_comms_quality sq;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	if (!local->sta_fw_ver)
-		ret = -1;
-	else if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) {
-		if (local->func->get_rid(local->dev,
-					 HFA384X_RID_DBMCOMMSQUALITY,
-					 &sq, sizeof(sq), 1) >= 0) {
-			local->comms_qual = (s16) le16_to_cpu(sq.comm_qual);
-			local->avg_signal = (s16) le16_to_cpu(sq.signal_level);
-			local->avg_noise = (s16) le16_to_cpu(sq.noise_level);
-			local->last_comms_qual_update = jiffies;
-		} else
-			ret = -1;
-	} else {
-		if (local->func->get_rid(local->dev, HFA384X_RID_COMMSQUALITY,
-					 &sq, sizeof(sq), 1) >= 0) {
-			local->comms_qual = le16_to_cpu(sq.comm_qual);
-			local->avg_signal = HFA384X_LEVEL_TO_dBm(
-				le16_to_cpu(sq.signal_level));
-			local->avg_noise = HFA384X_LEVEL_TO_dBm(
-				le16_to_cpu(sq.noise_level));
-			local->last_comms_qual_update = jiffies;
-		} else
-			ret = -1;
-	}
-
-	return ret;
-}
-
-
-int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype,
-			 u8 *body, size_t bodylen)
-{
-	struct sk_buff *skb;
-	struct hostap_ieee80211_mgmt *mgmt;
-	struct hostap_skb_tx_data *meta;
-	struct net_device *dev = local->dev;
-
-	skb = dev_alloc_skb(IEEE80211_MGMT_HDR_LEN + bodylen);
-	if (skb == NULL)
-		return -ENOMEM;
-
-	mgmt = skb_put_zero(skb, IEEE80211_MGMT_HDR_LEN);
-	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype);
-	memcpy(mgmt->da, dst, ETH_ALEN);
-	memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
-	memcpy(mgmt->bssid, dst, ETH_ALEN);
-	if (body)
-		skb_put_data(skb, body, bodylen);
-
-	meta = (struct hostap_skb_tx_data *) skb->cb;
-	memset(meta, 0, sizeof(*meta));
-	meta->magic = HOSTAP_SKB_TX_DATA_MAGIC;
-	meta->iface = netdev_priv(dev);
-
-	skb->dev = dev;
-	skb_reset_mac_header(skb);
-	skb_reset_network_header(skb);
-	dev_queue_xmit(skb);
-
-	return 0;
-}
-
-
-int prism2_sta_deauth(local_info_t *local, u16 reason)
-{
-	union iwreq_data wrqu;
-	int ret;
-	__le16 val = cpu_to_le16(reason);
-
-	if (local->iw_mode != IW_MODE_INFRA ||
-	    is_zero_ether_addr(local->bssid) ||
-	    ether_addr_equal(local->bssid, "\x44\x44\x44\x44\x44\x44"))
-		return 0;
-
-	ret = prism2_sta_send_mgmt(local, local->bssid, IEEE80211_STYPE_DEAUTH,
-				   (u8 *) &val, 2);
-	eth_zero_addr(wrqu.ap_addr.sa_data);
-	wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL);
-	return ret;
-}
-
-
-struct proc_dir_entry *hostap_proc;
-
-static int __init hostap_init(void)
-{
-	if (init_net.proc_net != NULL) {
-		hostap_proc = proc_mkdir("hostap", init_net.proc_net);
-		if (!hostap_proc)
-			printk(KERN_WARNING "Failed to mkdir "
-			       "/proc/net/hostap\n");
-	} else
-		hostap_proc = NULL;
-
-	return 0;
-}
-
-
-static void __exit hostap_exit(void)
-{
-	if (hostap_proc != NULL) {
-		hostap_proc = NULL;
-		remove_proc_entry("hostap", init_net.proc_net);
-	}
-}
-
-
-EXPORT_SYMBOL(hostap_set_word);
-EXPORT_SYMBOL(hostap_set_string);
-EXPORT_SYMBOL(hostap_get_porttype);
-EXPORT_SYMBOL(hostap_set_encryption);
-EXPORT_SYMBOL(hostap_set_antsel);
-EXPORT_SYMBOL(hostap_set_roaming);
-EXPORT_SYMBOL(hostap_set_auth_algs);
-EXPORT_SYMBOL(hostap_dump_rx_header);
-EXPORT_SYMBOL(hostap_dump_tx_header);
-EXPORT_SYMBOL(hostap_80211_get_hdrlen);
-EXPORT_SYMBOL(hostap_setup_dev);
-EXPORT_SYMBOL(hostap_set_multicast_list_queue);
-EXPORT_SYMBOL(hostap_set_hostapd);
-EXPORT_SYMBOL(hostap_set_hostapd_sta);
-EXPORT_SYMBOL(hostap_add_interface);
-EXPORT_SYMBOL(hostap_remove_interface);
-EXPORT_SYMBOL(prism2_update_comms_qual);
-
-module_init(hostap_init);
-module_exit(hostap_exit);
diff --git a/drivers/net/wireless/intersil/hostap/hostap_pci.c b/drivers/net/wireless/intersil/hostap/hostap_pci.c
deleted file mode 100644
index 52d77506ef..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_pci.c
+++ /dev/null
@@ -1,445 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#define PRISM2_PCI
-
-/* Host AP driver's support for Intersil Prism2.5 PCI cards is based on
- * driver patches from Reyk Floeter <reyk@vantronix.net> and
- * Andy Warner <andyw@pobox.com> */
-
-#include <linux/module.h>
-#include <linux/if.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-
-#include "hostap_wlan.h"
-
-
-static char *dev_info = "hostap_pci";
-
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Support for Intersil Prism2.5-based 802.11 wireless LAN "
-		   "PCI cards.");
-MODULE_LICENSE("GPL");
-
-
-/* struct local_info::hw_priv */
-struct hostap_pci_priv {
-	void __iomem *mem_start;
-};
-
-
-/* FIX: do we need mb/wmb/rmb with memory operations? */
-
-
-static const struct pci_device_id prism2_pci_id_table[] = {
-	/* Intersil Prism3 ISL3872 11Mb/s WLAN Controller */
-	{ 0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID },
-	/* Intersil Prism2.5 ISL3874 11Mb/s WLAN Controller */
-	{ 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID },
-	/* Samsung MagicLAN SWL-2210P */
-	{ 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID },
-	{ 0 }
-};
-
-
-#ifdef PRISM2_IO_DEBUG
-
-static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
-{
-	struct hostap_interface *iface;
-	struct hostap_pci_priv *hw_priv;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	hw_priv = local->hw_priv;
-
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
-	writeb(v, hw_priv->mem_start + a);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
-{
-	struct hostap_interface *iface;
-	struct hostap_pci_priv *hw_priv;
-	local_info_t *local;
-	unsigned long flags;
-	u8 v;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	hw_priv = local->hw_priv;
-
-	spin_lock_irqsave(&local->lock, flags);
-	v = readb(hw_priv->mem_start + a);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
-	spin_unlock_irqrestore(&local->lock, flags);
-	return v;
-}
-
-static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
-{
-	struct hostap_interface *iface;
-	struct hostap_pci_priv *hw_priv;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	hw_priv = local->hw_priv;
-
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
-	writew(v, hw_priv->mem_start + a);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
-{
-	struct hostap_interface *iface;
-	struct hostap_pci_priv *hw_priv;
-	local_info_t *local;
-	unsigned long flags;
-	u16 v;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-	hw_priv = local->hw_priv;
-
-	spin_lock_irqsave(&local->lock, flags);
-	v = readw(hw_priv->mem_start + a);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
-	spin_unlock_irqrestore(&local->lock, flags);
-	return v;
-}
-
-#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
-#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
-#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
-#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
-#define HFA384X_OUTW_DATA(v,a) hfa384x_outw_debug(dev, (a), le16_to_cpu((v)))
-#define HFA384X_INW_DATA(a) cpu_to_le16(hfa384x_inw_debug(dev, (a)))
-
-#else /* PRISM2_IO_DEBUG */
-
-static inline void hfa384x_outb(struct net_device *dev, int a, u8 v)
-{
-	struct hostap_interface *iface;
-	struct hostap_pci_priv *hw_priv;
-	iface = netdev_priv(dev);
-	hw_priv = iface->local->hw_priv;
-	writeb(v, hw_priv->mem_start + a);
-}
-
-static inline u8 hfa384x_inb(struct net_device *dev, int a)
-{
-	struct hostap_interface *iface;
-	struct hostap_pci_priv *hw_priv;
-	iface = netdev_priv(dev);
-	hw_priv = iface->local->hw_priv;
-	return readb(hw_priv->mem_start + a);
-}
-
-static inline void hfa384x_outw(struct net_device *dev, int a, u16 v)
-{
-	struct hostap_interface *iface;
-	struct hostap_pci_priv *hw_priv;
-	iface = netdev_priv(dev);
-	hw_priv = iface->local->hw_priv;
-	writew(v, hw_priv->mem_start + a);
-}
-
-static inline u16 hfa384x_inw(struct net_device *dev, int a)
-{
-	struct hostap_interface *iface;
-	struct hostap_pci_priv *hw_priv;
-	iface = netdev_priv(dev);
-	hw_priv = iface->local->hw_priv;
-	return readw(hw_priv->mem_start + a);
-}
-
-#define HFA384X_OUTB(v,a) hfa384x_outb(dev, (a), (v))
-#define HFA384X_INB(a) hfa384x_inb(dev, (a))
-#define HFA384X_OUTW(v,a) hfa384x_outw(dev, (a), (v))
-#define HFA384X_INW(a) hfa384x_inw(dev, (a))
-#define HFA384X_OUTW_DATA(v,a) hfa384x_outw(dev, (a), le16_to_cpu((v)))
-#define HFA384X_INW_DATA(a) cpu_to_le16(hfa384x_inw(dev, (a)))
-
-#endif /* PRISM2_IO_DEBUG */
-
-
-static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
-			    int len)
-{
-	u16 d_off;
-	__le16 *pos;
-
-	d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
-	pos = (__le16 *) buf;
-
-	for ( ; len > 1; len -= 2)
-		*pos++ = HFA384X_INW_DATA(d_off);
-
-	if (len & 1)
-		*((char *) pos) = HFA384X_INB(d_off);
-
-	return 0;
-}
-
-
-static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
-{
-	u16 d_off;
-	__le16 *pos;
-
-	d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
-	pos = (__le16 *) buf;
-
-	for ( ; len > 1; len -= 2)
-		HFA384X_OUTW_DATA(*pos++, d_off);
-
-	if (len & 1)
-		HFA384X_OUTB(*((char *) pos), d_off);
-
-	return 0;
-}
-
-
-/* FIX: This might change at some point.. */
-#include "hostap_hw.c"
-
-static void prism2_pci_cor_sreset(local_info_t *local)
-{
-	struct net_device *dev = local->dev;
-	u16 reg;
-
-	reg = HFA384X_INB(HFA384X_PCICOR_OFF);
-	printk(KERN_DEBUG "%s: Original COR value: 0x%0x\n", dev->name, reg);
-
-	/* linux-wlan-ng uses extremely long hold and settle times for
-	 * COR sreset. A comment in the driver code mentions that the long
-	 * delays appear to be necessary. However, at least IBM 22P6901 seems
-	 * to work fine with shorter delays.
-	 *
-	 * Longer delays can be configured by uncommenting following line: */
-/* #define PRISM2_PCI_USE_LONG_DELAYS */
-
-#ifdef PRISM2_PCI_USE_LONG_DELAYS
-	int i;
-
-	HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF);
-	mdelay(250);
-
-	HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF);
-	mdelay(500);
-
-	/* Wait for f/w to complete initialization (CMD:BUSY == 0) */
-	i = 2000000 / 10;
-	while ((HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) && --i)
-		udelay(10);
-
-#else /* PRISM2_PCI_USE_LONG_DELAYS */
-
-	HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF);
-	mdelay(2);
-	HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF);
-	mdelay(2);
-
-#endif /* PRISM2_PCI_USE_LONG_DELAYS */
-
-	if (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) {
-		printk(KERN_DEBUG "%s: COR sreset timeout\n", dev->name);
-	}
-}
-
-
-static void prism2_pci_genesis_reset(local_info_t *local, int hcr)
-{
-	struct net_device *dev = local->dev;
-
-	HFA384X_OUTW(0x00C5, HFA384X_PCICOR_OFF);
-	mdelay(10);
-	HFA384X_OUTW(hcr, HFA384X_PCIHCR_OFF);
-	mdelay(10);
-	HFA384X_OUTW(0x0045, HFA384X_PCICOR_OFF);
-	mdelay(10);
-}
-
-
-static struct prism2_helper_functions prism2_pci_funcs =
-{
-	.card_present	= NULL,
-	.cor_sreset	= prism2_pci_cor_sreset,
-	.genesis_reset	= prism2_pci_genesis_reset,
-	.hw_type	= HOSTAP_HW_PCI,
-};
-
-
-static int prism2_pci_probe(struct pci_dev *pdev,
-			    const struct pci_device_id *id)
-{
-	unsigned long phymem;
-	void __iomem *mem = NULL;
-	local_info_t *local = NULL;
-	struct net_device *dev = NULL;
-	static int cards_found /* = 0 */;
-	int irq_registered = 0;
-	struct hostap_interface *iface;
-	struct hostap_pci_priv *hw_priv;
-
-	hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
-	if (hw_priv == NULL)
-		return -ENOMEM;
-
-	if (pci_enable_device(pdev))
-		goto err_out_free;
-
-	phymem = pci_resource_start(pdev, 0);
-
-	if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "Prism2")) {
-		printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n");
-		goto err_out_disable;
-	}
-
-	mem = pci_ioremap_bar(pdev, 0);
-	if (mem == NULL) {
-		printk(KERN_ERR "prism2: Cannot remap PCI memory region\n") ;
-		goto fail;
-	}
-
-	dev = prism2_init_local_data(&prism2_pci_funcs, cards_found,
-				     &pdev->dev);
-	if (dev == NULL)
-		goto fail;
-	iface = netdev_priv(dev);
-	local = iface->local;
-	local->hw_priv = hw_priv;
-	cards_found++;
-
-        dev->irq = pdev->irq;
-        hw_priv->mem_start = mem;
-	dev->base_addr = (unsigned long) mem;
-
-	prism2_pci_cor_sreset(local);
-
-	pci_set_drvdata(pdev, dev);
-
-	if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name,
-			dev)) {
-		printk(KERN_WARNING "%s: request_irq failed\n", dev->name);
-		goto fail;
-	} else
-		irq_registered = 1;
-
-	if (!local->pri_only && prism2_hw_config(dev, 1)) {
-		printk(KERN_DEBUG "%s: hardware initialization failed\n",
-		       dev_info);
-		goto fail;
-	}
-
-	printk(KERN_INFO "%s: Intersil Prism2.5 PCI: "
-	       "mem=0x%lx, irq=%d\n", dev->name, phymem, dev->irq);
-
-	return hostap_hw_ready(dev);
-
- fail:
-	if (irq_registered && dev)
-		free_irq(dev->irq, dev);
-
-	if (mem)
-		iounmap(mem);
-
-	release_mem_region(phymem, pci_resource_len(pdev, 0));
-
- err_out_disable:
-	pci_disable_device(pdev);
-	prism2_free_local_data(dev);
-
- err_out_free:
-	kfree(hw_priv);
-
-	return -ENODEV;
-}
-
-
-static void prism2_pci_remove(struct pci_dev *pdev)
-{
-	struct net_device *dev;
-	struct hostap_interface *iface;
-	void __iomem *mem_start;
-	struct hostap_pci_priv *hw_priv;
-
-	dev = pci_get_drvdata(pdev);
-	iface = netdev_priv(dev);
-	hw_priv = iface->local->hw_priv;
-
-	/* Reset the hardware, and ensure interrupts are disabled. */
-	prism2_pci_cor_sreset(iface->local);
-	hfa384x_disable_interrupts(dev);
-
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-
-	mem_start = hw_priv->mem_start;
-	prism2_free_local_data(dev);
-	kfree(hw_priv);
-
-	iounmap(mem_start);
-
-	release_mem_region(pci_resource_start(pdev, 0),
-			   pci_resource_len(pdev, 0));
-	pci_disable_device(pdev);
-}
-
-static int __maybe_unused prism2_pci_suspend(struct device *dev_d)
-{
-	struct net_device *dev = dev_get_drvdata(dev_d);
-
-	if (netif_running(dev)) {
-		netif_stop_queue(dev);
-		netif_device_detach(dev);
-	}
-	prism2_suspend(dev);
-
-	return 0;
-}
-
-static int __maybe_unused prism2_pci_resume(struct device *dev_d)
-{
-	struct net_device *dev = dev_get_drvdata(dev_d);
-
-	prism2_hw_config(dev, 0);
-	if (netif_running(dev)) {
-		netif_device_attach(dev);
-		netif_start_queue(dev);
-	}
-
-	return 0;
-}
-
-MODULE_DEVICE_TABLE(pci, prism2_pci_id_table);
-
-static SIMPLE_DEV_PM_OPS(prism2_pci_pm_ops,
-			 prism2_pci_suspend,
-			 prism2_pci_resume);
-
-static struct pci_driver prism2_pci_driver = {
-	.name		= "hostap_pci",
-	.id_table	= prism2_pci_id_table,
-	.probe		= prism2_pci_probe,
-	.remove		= prism2_pci_remove,
-	.driver.pm	= &prism2_pci_pm_ops,
-};
-
-module_pci_driver(prism2_pci_driver);
diff --git a/drivers/net/wireless/intersil/hostap/hostap_plx.c b/drivers/net/wireless/intersil/hostap/hostap_plx.c
deleted file mode 100644
index 58247290fc..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_plx.c
+++ /dev/null
@@ -1,617 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#define PRISM2_PLX
-
-/* Host AP driver's support for PC Cards on PCI adapters using PLX9052 is
- * based on:
- * - Host AP driver patch from james@madingley.org
- * - linux-wlan-ng driver, Copyright (C) AbsoluteValue Systems, Inc.
- */
-
-
-#include <linux/module.h>
-#include <linux/if.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-
-#include "hostap_wlan.h"
-
-
-static char *dev_info = "hostap_plx";
-
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
-		   "cards (PLX).");
-MODULE_LICENSE("GPL");
-
-
-static int ignore_cis;
-module_param(ignore_cis, int, 0444);
-MODULE_PARM_DESC(ignore_cis, "Do not verify manfid information in CIS");
-
-
-/* struct local_info::hw_priv */
-struct hostap_plx_priv {
-	void __iomem *attr_mem;
-	unsigned int cor_offset;
-};
-
-
-#define PLX_MIN_ATTR_LEN 512	/* at least 2 x 256 is needed for CIS */
-#define COR_SRESET       0x80
-#define COR_LEVLREQ      0x40
-#define COR_ENABLE_FUNC  0x01
-/* PCI Configuration Registers */
-#define PLX_PCIIPR       0x3d   /* PCI Interrupt Pin */
-/* Local Configuration Registers */
-#define PLX_INTCSR       0x4c   /* Interrupt Control/Status Register */
-#define PLX_INTCSR_PCI_INTEN BIT(6) /* PCI Interrupt Enable */
-#define PLX_CNTRL        0x50
-#define PLX_CNTRL_SERIAL_EEPROM_PRESENT BIT(28)
-
-
-#define PLXDEV(vendor,dev,str) { vendor, dev, PCI_ANY_ID, PCI_ANY_ID }
-
-static const struct pci_device_id prism2_plx_id_table[] = {
-	PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"),
-	PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"),
-	PLXDEV(0x126c, 0x8030, "Nortel emobility"),
-	PLXDEV(0x1562, 0x0001, "Symbol LA-4123"),
-	PLXDEV(0x1385, 0x4100, "Netgear MA301"),
-	PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"),
-	PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"),
-	PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"),
-	PLXDEV(0x16ab, 0x1100, "Global Sun Tech GL24110P"),
-	PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"),
-	PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"),
-	PLXDEV(0x16ab, 0x1103, "Longshine 8031"),
-	PLXDEV(0x16ec, 0x3685, "US Robotics USR2415"),
-	PLXDEV(0xec80, 0xec00, "Belkin F5D6000"),
-	{ 0 }
-};
-
-
-/* Array of known Prism2/2.5 PC Card manufactured ids. If your card's manfid
- * is not listed here, you will need to add it here to get the driver
- * initialized. */
-static struct prism2_plx_manfid {
-	u16 manfid1, manfid2;
-} prism2_plx_known_manfids[] = {
-	{ 0x000b, 0x7110 } /* D-Link DWL-650 Rev. P1 */,
-	{ 0x000b, 0x7300 } /* Philips 802.11b WLAN PCMCIA */,
-	{ 0x0101, 0x0777 } /* 3Com AirConnect PCI 777A */,
-	{ 0x0126, 0x8000 } /* Proxim RangeLAN */,
-	{ 0x0138, 0x0002 } /* Compaq WL100 */,
-	{ 0x0156, 0x0002 } /* Intersil Prism II Ref. Design (and others) */,
-	{ 0x026f, 0x030b } /* Buffalo WLI-CF-S11G */,
-	{ 0x0274, 0x1612 } /* Linksys WPC11 Ver 2.5 */,
-	{ 0x0274, 0x1613 } /* Linksys WPC11 Ver 3 */,
-	{ 0x028a, 0x0002 } /* D-Link DRC-650 */,
-	{ 0x0250, 0x0002 } /* Samsung SWL2000-N */,
-	{ 0xc250, 0x0002 } /* EMTAC A2424i */,
-	{ 0xd601, 0x0002 } /* Z-Com XI300 */,
-	{ 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
-	{ 0, 0}
-};
-
-
-#ifdef PRISM2_IO_DEBUG
-
-static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
-	outb(v, dev->base_addr + a);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-	u8 v;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	spin_lock_irqsave(&local->lock, flags);
-	v = inb(dev->base_addr + a);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
-	spin_unlock_irqrestore(&local->lock, flags);
-	return v;
-}
-
-static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
-	outw(v, dev->base_addr + a);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-	u16 v;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	spin_lock_irqsave(&local->lock, flags);
-	v = inw(dev->base_addr + a);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
-	spin_unlock_irqrestore(&local->lock, flags);
-	return v;
-}
-
-static inline void hfa384x_outsw_debug(struct net_device *dev, int a,
-				       u8 *buf, int wc)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc);
-	outsw(dev->base_addr + a, buf, wc);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-static inline void hfa384x_insw_debug(struct net_device *dev, int a,
-				      u8 *buf, int wc)
-{
-	struct hostap_interface *iface;
-	local_info_t *local;
-	unsigned long flags;
-
-	iface = netdev_priv(dev);
-	local = iface->local;
-
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc);
-	insw(dev->base_addr + a, buf, wc);
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
-#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
-#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
-#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
-#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc))
-#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc))
-
-#else /* PRISM2_IO_DEBUG */
-
-#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a))
-#define HFA384X_INB(a) inb(dev->base_addr + (a))
-#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a))
-#define HFA384X_INW(a) inw(dev->base_addr + (a))
-#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc)
-#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc)
-
-#endif /* PRISM2_IO_DEBUG */
-
-
-static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
-			    int len)
-{
-	u16 d_off;
-	u16 *pos;
-
-	d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
-	pos = (u16 *) buf;
-
-	if (len / 2)
-		HFA384X_INSW(d_off, buf, len / 2);
-	pos += len / 2;
-
-	if (len & 1)
-		*((char *) pos) = HFA384X_INB(d_off);
-
-	return 0;
-}
-
-
-static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
-{
-	u16 d_off;
-	u16 *pos;
-
-	d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
-	pos = (u16 *) buf;
-
-	if (len / 2)
-		HFA384X_OUTSW(d_off, buf, len / 2);
-	pos += len / 2;
-
-	if (len & 1)
-		HFA384X_OUTB(*((char *) pos), d_off);
-
-	return 0;
-}
-
-
-/* FIX: This might change at some point.. */
-#include "hostap_hw.c"
-
-
-static void prism2_plx_cor_sreset(local_info_t *local)
-{
-	unsigned char corsave;
-	struct hostap_plx_priv *hw_priv = local->hw_priv;
-
-	printk(KERN_DEBUG "%s: Doing reset via direct COR access.\n",
-	       dev_info);
-
-	/* Set sreset bit of COR and clear it after hold time */
-
-	if (hw_priv->attr_mem == NULL) {
-		/* TMD7160 - COR at card's first I/O addr */
-		corsave = inb(hw_priv->cor_offset);
-		outb(corsave | COR_SRESET, hw_priv->cor_offset);
-		mdelay(2);
-		outb(corsave & ~COR_SRESET, hw_priv->cor_offset);
-		mdelay(2);
-	} else {
-		/* PLX9052 */
-		corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset);
-		writeb(corsave | COR_SRESET,
-		       hw_priv->attr_mem + hw_priv->cor_offset);
-		mdelay(2);
-		writeb(corsave & ~COR_SRESET,
-		       hw_priv->attr_mem + hw_priv->cor_offset);
-		mdelay(2);
-	}
-}
-
-
-static void prism2_plx_genesis_reset(local_info_t *local, int hcr)
-{
-	unsigned char corsave;
-	struct hostap_plx_priv *hw_priv = local->hw_priv;
-
-	if (hw_priv->attr_mem == NULL) {
-		/* TMD7160 - COR at card's first I/O addr */
-		corsave = inb(hw_priv->cor_offset);
-		outb(corsave | COR_SRESET, hw_priv->cor_offset);
-		mdelay(10);
-		outb(hcr, hw_priv->cor_offset + 2);
-		mdelay(10);
-		outb(corsave & ~COR_SRESET, hw_priv->cor_offset);
-		mdelay(10);
-	} else {
-		/* PLX9052 */
-		corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset);
-		writeb(corsave | COR_SRESET,
-		       hw_priv->attr_mem + hw_priv->cor_offset);
-		mdelay(10);
-		writeb(hcr, hw_priv->attr_mem + hw_priv->cor_offset + 2);
-		mdelay(10);
-		writeb(corsave & ~COR_SRESET,
-		       hw_priv->attr_mem + hw_priv->cor_offset);
-		mdelay(10);
-	}
-}
-
-
-static struct prism2_helper_functions prism2_plx_funcs =
-{
-	.card_present	= NULL,
-	.cor_sreset	= prism2_plx_cor_sreset,
-	.genesis_reset	= prism2_plx_genesis_reset,
-	.hw_type	= HOSTAP_HW_PLX,
-};
-
-
-static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len,
-				unsigned int *cor_offset,
-				unsigned int *cor_index)
-{
-#define CISTPL_CONFIG 0x1A
-#define CISTPL_MANFID 0x20
-#define CISTPL_END 0xFF
-#define CIS_MAX_LEN 256
-	u8 *cis;
-	int i, pos;
-	unsigned int rmsz, rasz, manfid1, manfid2;
-	struct prism2_plx_manfid *manfid;
-
-	cis = kmalloc(CIS_MAX_LEN, GFP_KERNEL);
-	if (cis == NULL)
-		return -ENOMEM;
-
-	/* read CIS; it is in even offsets in the beginning of attr_mem */
-	for (i = 0; i < CIS_MAX_LEN; i++)
-		cis[i] = readb(attr_mem + 2 * i);
-	printk(KERN_DEBUG "%s: CIS: %6ph ...\n", dev_info, cis);
-
-	/* set reasonable defaults for Prism2 cards just in case CIS parsing
-	 * fails */
-	*cor_offset = 0x3e0;
-	*cor_index = 0x01;
-	manfid1 = manfid2 = 0;
-
-	pos = 0;
-	while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) {
-		if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN)
-			goto cis_error;
-
-		switch (cis[pos]) {
-		case CISTPL_CONFIG:
-			if (cis[pos + 1] < 2)
-				goto cis_error;
-			rmsz = (cis[pos + 2] & 0x3c) >> 2;
-			rasz = cis[pos + 2] & 0x03;
-			if (4 + rasz + rmsz > cis[pos + 1])
-				goto cis_error;
-			*cor_index = cis[pos + 3] & 0x3F;
-			*cor_offset = 0;
-			for (i = 0; i <= rasz; i++)
-				*cor_offset += cis[pos + 4 + i] << (8 * i);
-			printk(KERN_DEBUG "%s: cor_index=0x%x "
-			       "cor_offset=0x%x\n", dev_info,
-			       *cor_index, *cor_offset);
-			if (*cor_offset > attr_len) {
-				printk(KERN_ERR "%s: COR offset not within "
-				       "attr_mem\n", dev_info);
-				kfree(cis);
-				return -1;
-			}
-			break;
-
-		case CISTPL_MANFID:
-			if (cis[pos + 1] < 4)
-				goto cis_error;
-			manfid1 = cis[pos + 2] + (cis[pos + 3] << 8);
-			manfid2 = cis[pos + 4] + (cis[pos + 5] << 8);
-			printk(KERN_DEBUG "%s: manfid=0x%04x, 0x%04x\n",
-			       dev_info, manfid1, manfid2);
-			break;
-		}
-
-		pos += cis[pos + 1] + 2;
-	}
-
-	if (pos >= CIS_MAX_LEN || cis[pos] != CISTPL_END)
-		goto cis_error;
-
-	for (manfid = prism2_plx_known_manfids; manfid->manfid1 != 0; manfid++)
-		if (manfid1 == manfid->manfid1 && manfid2 == manfid->manfid2) {
-			kfree(cis);
-			return 0;
-		}
-
-	printk(KERN_INFO "%s: unknown manfid 0x%04x, 0x%04x - assuming this is"
-	       " not supported card\n", dev_info, manfid1, manfid2);
-	goto fail;
-
- cis_error:
-	printk(KERN_WARNING "%s: invalid CIS data\n", dev_info);
-
- fail:
-	kfree(cis);
-	if (ignore_cis) {
-		printk(KERN_INFO "%s: ignore_cis parameter set - ignoring "
-		       "errors during CIS verification\n", dev_info);
-		return 0;
-	}
-	return -1;
-}
-
-
-static int prism2_plx_probe(struct pci_dev *pdev,
-			    const struct pci_device_id *id)
-{
-	unsigned int pccard_ioaddr, plx_ioaddr;
-	unsigned long pccard_attr_mem;
-	unsigned int pccard_attr_len;
-	void __iomem *attr_mem = NULL;
-	unsigned int cor_offset = 0, cor_index = 0;
-	u32 reg;
-	local_info_t *local = NULL;
-	struct net_device *dev = NULL;
-	struct hostap_interface *iface;
-	static int cards_found /* = 0 */;
-	int irq_registered = 0;
-	int tmd7160;
-	struct hostap_plx_priv *hw_priv;
-
-	hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
-	if (hw_priv == NULL)
-		return -ENOMEM;
-
-	if (pci_enable_device(pdev))
-		goto err_out_free;
-
-	/* National Datacomm NCP130 based on TMD7160, not PLX9052. */
-	tmd7160 = (pdev->vendor == 0x15e8) && (pdev->device == 0x0131);
-
-	plx_ioaddr = pci_resource_start(pdev, 1);
-	pccard_ioaddr = pci_resource_start(pdev, tmd7160 ? 2 : 3);
-
-	if (tmd7160) {
-		/* TMD7160 */
-		attr_mem = NULL; /* no access to PC Card attribute memory */
-
-		printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, "
-		       "irq=%d, pccard_io=0x%x\n",
-		       plx_ioaddr, pdev->irq, pccard_ioaddr);
-
-		cor_offset = plx_ioaddr;
-		cor_index = 0x04;
-
-		outb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, plx_ioaddr);
-		mdelay(1);
-		reg = inb(plx_ioaddr);
-		if (reg != (cor_index | COR_LEVLREQ | COR_ENABLE_FUNC)) {
-			printk(KERN_ERR "%s: Error setting COR (expected="
-			       "0x%02x, was=0x%02x)\n", dev_info,
-			       cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, reg);
-			goto fail;
-		}
-	} else {
-		/* PLX9052 */
-		pccard_attr_mem = pci_resource_start(pdev, 2);
-		pccard_attr_len = pci_resource_len(pdev, 2);
-		if (pccard_attr_len < PLX_MIN_ATTR_LEN)
-			goto fail;
-
-
-		attr_mem = ioremap(pccard_attr_mem, pccard_attr_len);
-		if (attr_mem == NULL) {
-			printk(KERN_ERR "%s: cannot remap attr_mem\n",
-			       dev_info);
-			goto fail;
-		}
-
-		printk(KERN_INFO "PLX9052 PCI/PCMCIA adapter: "
-		       "mem=0x%lx, plx_io=0x%x, irq=%d, pccard_io=0x%x\n",
-		       pccard_attr_mem, plx_ioaddr, pdev->irq, pccard_ioaddr);
-
-		if (prism2_plx_check_cis(attr_mem, pccard_attr_len,
-					 &cor_offset, &cor_index)) {
-			printk(KERN_INFO "Unknown PC Card CIS - not a "
-			       "Prism2/2.5 card?\n");
-			goto fail;
-		}
-
-		printk(KERN_DEBUG "Prism2/2.5 PC Card detected in PLX9052 "
-		       "adapter\n");
-
-		/* Write COR to enable PC Card */
-		writeb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC,
-		       attr_mem + cor_offset);
-
-		/* Enable PCI interrupts if they are not already enabled */
-		reg = inl(plx_ioaddr + PLX_INTCSR);
-		printk(KERN_DEBUG "PLX_INTCSR=0x%x\n", reg);
-		if (!(reg & PLX_INTCSR_PCI_INTEN)) {
-			outl(reg | PLX_INTCSR_PCI_INTEN,
-			     plx_ioaddr + PLX_INTCSR);
-			if (!(inl(plx_ioaddr + PLX_INTCSR) &
-			      PLX_INTCSR_PCI_INTEN)) {
-				printk(KERN_WARNING "%s: Could not enable "
-				       "Local Interrupts\n", dev_info);
-				goto fail;
-			}
-		}
-
-		reg = inl(plx_ioaddr + PLX_CNTRL);
-		printk(KERN_DEBUG "PLX_CNTRL=0x%x (Serial EEPROM "
-		       "present=%d)\n",
-		       reg, (reg & PLX_CNTRL_SERIAL_EEPROM_PRESENT) != 0);
-		/* should set PLX_PCIIPR to 0x01 (INTA#) if Serial EEPROM is
-		 * not present; but are there really such cards in use(?) */
-	}
-
-	dev = prism2_init_local_data(&prism2_plx_funcs, cards_found,
-				     &pdev->dev);
-	if (dev == NULL)
-		goto fail;
-	iface = netdev_priv(dev);
-	local = iface->local;
-	local->hw_priv = hw_priv;
-	cards_found++;
-
-	dev->irq = pdev->irq;
-	dev->base_addr = pccard_ioaddr;
-	hw_priv->attr_mem = attr_mem;
-	hw_priv->cor_offset = cor_offset;
-
-	pci_set_drvdata(pdev, dev);
-
-	if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name,
-			dev)) {
-		printk(KERN_WARNING "%s: request_irq failed\n", dev->name);
-		goto fail;
-	} else
-		irq_registered = 1;
-
-	if (prism2_hw_config(dev, 1)) {
-		printk(KERN_DEBUG "%s: hardware initialization failed\n",
-		       dev_info);
-		goto fail;
-	}
-
-	return hostap_hw_ready(dev);
-
- fail:
-	if (irq_registered && dev)
-		free_irq(dev->irq, dev);
-
-	if (attr_mem)
-		iounmap(attr_mem);
-
-	pci_disable_device(pdev);
-	prism2_free_local_data(dev);
-
- err_out_free:
-	kfree(hw_priv);
-
-	return -ENODEV;
-}
-
-
-static void prism2_plx_remove(struct pci_dev *pdev)
-{
-	struct net_device *dev;
-	struct hostap_interface *iface;
-	struct hostap_plx_priv *hw_priv;
-
-	dev = pci_get_drvdata(pdev);
-	iface = netdev_priv(dev);
-	hw_priv = iface->local->hw_priv;
-
-	/* Reset the hardware, and ensure interrupts are disabled. */
-	prism2_plx_cor_sreset(iface->local);
-	hfa384x_disable_interrupts(dev);
-
-	if (hw_priv->attr_mem)
-		iounmap(hw_priv->attr_mem);
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-
-	prism2_free_local_data(dev);
-	kfree(hw_priv);
-	pci_disable_device(pdev);
-}
-
-
-MODULE_DEVICE_TABLE(pci, prism2_plx_id_table);
-
-static struct pci_driver prism2_plx_driver = {
-	.name		= "hostap_plx",
-	.id_table	= prism2_plx_id_table,
-	.probe		= prism2_plx_probe,
-	.remove		= prism2_plx_remove,
-};
-
-module_pci_driver(prism2_plx_driver);
diff --git a/drivers/net/wireless/intersil/hostap/hostap_proc.c b/drivers/net/wireless/intersil/hostap/hostap_proc.c
deleted file mode 100644
index 61f6878605..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_proc.c
+++ /dev/null
@@ -1,411 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* /proc routines for Host AP driver */
-
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/export.h>
-#include <net/lib80211.h>
-
-#include "hostap_wlan.h"
-#include "hostap.h"
-
-#define PROC_LIMIT (PAGE_SIZE - 80)
-
-#if !defined(PRISM2_NO_PROCFS_DEBUG) && defined(CONFIG_PROC_FS)
-static int prism2_debug_proc_show(struct seq_file *m, void *v)
-{
-	local_info_t *local = m->private;
-	int i;
-
-	seq_printf(m, "next_txfid=%d next_alloc=%d\n",
-		   local->next_txfid, local->next_alloc);
-	for (i = 0; i < PRISM2_TXFID_COUNT; i++)
-		seq_printf(m, "FID: tx=%04X intransmit=%04X\n",
-			   local->txfid[i], local->intransmitfid[i]);
-	seq_printf(m, "FW TX rate control: %d\n", local->fw_tx_rate_control);
-	seq_printf(m, "beacon_int=%d\n", local->beacon_int);
-	seq_printf(m, "dtim_period=%d\n", local->dtim_period);
-	seq_printf(m, "wds_max_connections=%d\n", local->wds_max_connections);
-	seq_printf(m, "dev_enabled=%d\n", local->dev_enabled);
-	seq_printf(m, "sw_tick_stuck=%d\n", local->sw_tick_stuck);
-	for (i = 0; i < WEP_KEYS; i++) {
-		if (local->crypt_info.crypt[i] &&
-		    local->crypt_info.crypt[i]->ops) {
-			seq_printf(m, "crypt[%d]=%s\n", i,
-				   local->crypt_info.crypt[i]->ops->name);
-		}
-	}
-	seq_printf(m, "pri_only=%d\n", local->pri_only);
-	seq_printf(m, "pci=%d\n", local->func->hw_type == HOSTAP_HW_PCI);
-	seq_printf(m, "sram_type=%d\n", local->sram_type);
-	seq_printf(m, "no_pri=%d\n", local->no_pri);
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_PROC_FS
-static int prism2_stats_proc_show(struct seq_file *m, void *v)
-{
-	local_info_t *local = m->private;
-	struct comm_tallies_sums *sums = &local->comm_tallies;
-
-	seq_printf(m, "TxUnicastFrames=%u\n", sums->tx_unicast_frames);
-	seq_printf(m, "TxMulticastframes=%u\n", sums->tx_multicast_frames);
-	seq_printf(m, "TxFragments=%u\n", sums->tx_fragments);
-	seq_printf(m, "TxUnicastOctets=%u\n", sums->tx_unicast_octets);
-	seq_printf(m, "TxMulticastOctets=%u\n", sums->tx_multicast_octets);
-	seq_printf(m, "TxDeferredTransmissions=%u\n",
-		   sums->tx_deferred_transmissions);
-	seq_printf(m, "TxSingleRetryFrames=%u\n", sums->tx_single_retry_frames);
-	seq_printf(m, "TxMultipleRetryFrames=%u\n",
-		   sums->tx_multiple_retry_frames);
-	seq_printf(m, "TxRetryLimitExceeded=%u\n",
-		   sums->tx_retry_limit_exceeded);
-	seq_printf(m, "TxDiscards=%u\n", sums->tx_discards);
-	seq_printf(m, "RxUnicastFrames=%u\n", sums->rx_unicast_frames);
-	seq_printf(m, "RxMulticastFrames=%u\n", sums->rx_multicast_frames);
-	seq_printf(m, "RxFragments=%u\n", sums->rx_fragments);
-	seq_printf(m, "RxUnicastOctets=%u\n", sums->rx_unicast_octets);
-	seq_printf(m, "RxMulticastOctets=%u\n", sums->rx_multicast_octets);
-	seq_printf(m, "RxFCSErrors=%u\n", sums->rx_fcs_errors);
-	seq_printf(m, "RxDiscardsNoBuffer=%u\n", sums->rx_discards_no_buffer);
-	seq_printf(m, "TxDiscardsWrongSA=%u\n", sums->tx_discards_wrong_sa);
-	seq_printf(m, "RxDiscardsWEPUndecryptable=%u\n",
-		   sums->rx_discards_wep_undecryptable);
-	seq_printf(m, "RxMessageInMsgFragments=%u\n",
-		   sums->rx_message_in_msg_fragments);
-	seq_printf(m, "RxMessageInBadMsgFragments=%u\n",
-		   sums->rx_message_in_bad_msg_fragments);
-	/* FIX: this may grow too long for one page(?) */
-
-	return 0;
-}
-#endif
-
-static int prism2_wds_proc_show(struct seq_file *m, void *v)
-{
-	struct list_head *ptr = v;
-	struct hostap_interface *iface;
-
-	iface = list_entry(ptr, struct hostap_interface, list);
-	if (iface->type == HOSTAP_INTERFACE_WDS)
-		seq_printf(m, "%s\t%pM\n",
-			   iface->dev->name, iface->u.wds.remote_addr);
-	return 0;
-}
-
-static void *prism2_wds_proc_start(struct seq_file *m, loff_t *_pos)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	read_lock_bh(&local->iface_lock);
-	return seq_list_start(&local->hostap_interfaces, *_pos);
-}
-
-static void *prism2_wds_proc_next(struct seq_file *m, void *v, loff_t *_pos)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	return seq_list_next(v, &local->hostap_interfaces, _pos);
-}
-
-static void prism2_wds_proc_stop(struct seq_file *m, void *v)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	read_unlock_bh(&local->iface_lock);
-}
-
-static const struct seq_operations prism2_wds_proc_seqops = {
-	.start	= prism2_wds_proc_start,
-	.next	= prism2_wds_proc_next,
-	.stop	= prism2_wds_proc_stop,
-	.show	= prism2_wds_proc_show,
-};
-
-static int prism2_bss_list_proc_show(struct seq_file *m, void *v)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	struct list_head *ptr = v;
-	struct hostap_bss_info *bss;
-
-	if (ptr == &local->bss_list) {
-		seq_printf(m, "#BSSID\tlast_update\tcount\tcapab_info\tSSID(txt)\t"
-			   "SSID(hex)\tWPA IE\n");
-		return 0;
-	}
-
-	bss = list_entry(ptr, struct hostap_bss_info, list);
-	seq_printf(m, "%pM\t%lu\t%u\t0x%x\t",
-		   bss->bssid, bss->last_update,
-		   bss->count, bss->capab_info);
-
-	seq_printf(m, "%*pE", (int)bss->ssid_len, bss->ssid);
-
-	seq_putc(m, '\t');
-	seq_printf(m, "%*phN", (int)bss->ssid_len, bss->ssid);
-	seq_putc(m, '\t');
-	seq_printf(m, "%*phN", (int)bss->wpa_ie_len, bss->wpa_ie);
-	seq_putc(m, '\n');
-	return 0;
-}
-
-static void *prism2_bss_list_proc_start(struct seq_file *m, loff_t *_pos)
-	__acquires(&local->lock)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	spin_lock_bh(&local->lock);
-	return seq_list_start_head(&local->bss_list, *_pos);
-}
-
-static void *prism2_bss_list_proc_next(struct seq_file *m, void *v, loff_t *_pos)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	return seq_list_next(v, &local->bss_list, _pos);
-}
-
-static void prism2_bss_list_proc_stop(struct seq_file *m, void *v)
-	__releases(&local->lock)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	spin_unlock_bh(&local->lock);
-}
-
-static const struct seq_operations prism2_bss_list_proc_seqops = {
-	.start	= prism2_bss_list_proc_start,
-	.next	= prism2_bss_list_proc_next,
-	.stop	= prism2_bss_list_proc_stop,
-	.show	= prism2_bss_list_proc_show,
-};
-
-#ifdef CONFIG_PROC_FS
-static int prism2_crypt_proc_show(struct seq_file *m, void *v)
-{
-	local_info_t *local = m->private;
-	int i;
-
-	seq_printf(m, "tx_keyidx=%d\n", local->crypt_info.tx_keyidx);
-	for (i = 0; i < WEP_KEYS; i++) {
-		if (local->crypt_info.crypt[i] &&
-		    local->crypt_info.crypt[i]->ops &&
-		    local->crypt_info.crypt[i]->ops->print_stats) {
-			local->crypt_info.crypt[i]->ops->print_stats(
-				m, local->crypt_info.crypt[i]->priv);
-		}
-	}
-	return 0;
-}
-#endif
-
-static ssize_t prism2_pda_proc_read(struct file *file, char __user *buf,
-				    size_t count, loff_t *_pos)
-{
-	local_info_t *local = pde_data(file_inode(file));
-	size_t off;
-
-	if (local->pda == NULL || *_pos >= PRISM2_PDA_SIZE)
-		return 0;
-
-	off = *_pos;
-	if (count > PRISM2_PDA_SIZE - off)
-		count = PRISM2_PDA_SIZE - off;
-	if (copy_to_user(buf, local->pda + off, count) != 0)
-		return -EFAULT;
-	*_pos += count;
-	return count;
-}
-
-static const struct proc_ops prism2_pda_proc_ops = {
-	.proc_read	= prism2_pda_proc_read,
-	.proc_lseek	= generic_file_llseek,
-};
-
-
-static ssize_t prism2_aux_dump_proc_no_read(struct file *file, char __user *buf,
-					    size_t bufsize, loff_t *_pos)
-{
-	return 0;
-}
-
-static const struct proc_ops prism2_aux_dump_proc_ops = {
-	.proc_read	= prism2_aux_dump_proc_no_read,
-	.proc_lseek	= default_llseek,
-};
-
-
-#ifdef PRISM2_IO_DEBUG
-static int prism2_io_debug_proc_read(char *page, char **start, off_t off,
-				     int count, int *eof, void *data)
-{
-	local_info_t *local = (local_info_t *) data;
-	int head = local->io_debug_head;
-	int start_bytes, left, copy;
-
-	if (off + count > PRISM2_IO_DEBUG_SIZE * 4) {
-		*eof = 1;
-		if (off >= PRISM2_IO_DEBUG_SIZE * 4)
-			return 0;
-		count = PRISM2_IO_DEBUG_SIZE * 4 - off;
-	}
-
-	start_bytes = (PRISM2_IO_DEBUG_SIZE - head) * 4;
-	left = count;
-
-	if (off < start_bytes) {
-		copy = start_bytes - off;
-		if (copy > count)
-			copy = count;
-		memcpy(page, ((u8 *) &local->io_debug[head]) + off, copy);
-		left -= copy;
-		if (left > 0)
-			memcpy(&page[copy], local->io_debug, left);
-	} else {
-		memcpy(page, ((u8 *) local->io_debug) + (off - start_bytes),
-		       left);
-	}
-
-	*start = page;
-
-	return count;
-}
-#endif /* PRISM2_IO_DEBUG */
-
-
-#ifndef PRISM2_NO_STATION_MODES
-static int prism2_scan_results_proc_show(struct seq_file *m, void *v)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	unsigned long entry;
-	int i, len;
-	struct hfa384x_hostscan_result *scanres;
-	u8 *p;
-
-	if (v == SEQ_START_TOKEN) {
-		seq_printf(m,
-			   "CHID ANL SL BcnInt Capab Rate BSSID ATIM SupRates SSID\n");
-		return 0;
-	}
-
-	entry = (unsigned long)v - 2;
-	scanres = &local->last_scan_results[entry];
-
-	seq_printf(m, "%d %d %d %d 0x%02x %d %pM %d ",
-		   le16_to_cpu(scanres->chid),
-		   (s16) le16_to_cpu(scanres->anl),
-		   (s16) le16_to_cpu(scanres->sl),
-		   le16_to_cpu(scanres->beacon_interval),
-		   le16_to_cpu(scanres->capability),
-		   le16_to_cpu(scanres->rate),
-		   scanres->bssid,
-		   le16_to_cpu(scanres->atim));
-
-	p = scanres->sup_rates;
-	for (i = 0; i < sizeof(scanres->sup_rates); i++) {
-		if (p[i] == 0)
-			break;
-		seq_printf(m, "<%02x>", p[i]);
-	}
-	seq_putc(m, ' ');
-
-	p = scanres->ssid;
-	len = le16_to_cpu(scanres->ssid_len);
-	if (len > 32)
-		len = 32;
-	for (i = 0; i < len; i++) {
-		unsigned char c = p[i];
-		if (c >= 32 && c < 127)
-			seq_putc(m, c);
-		else
-			seq_printf(m, "<%02x>", c);
-	}
-	seq_putc(m, '\n');
-	return 0;
-}
-
-static void *prism2_scan_results_proc_start(struct seq_file *m, loff_t *_pos)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	spin_lock_bh(&local->lock);
-
-	/* We have a header (pos 0) + N results to show (pos 1...N) */
-	if (*_pos > local->last_scan_results_count)
-		return NULL;
-	return (void *)(unsigned long)(*_pos + 1); /* 0 would be EOF */
-}
-
-static void *prism2_scan_results_proc_next(struct seq_file *m, void *v, loff_t *_pos)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-
-	++*_pos;
-	if (*_pos > local->last_scan_results_count)
-		return NULL;
-	return (void *)(unsigned long)(*_pos + 1); /* 0 would be EOF */
-}
-
-static void prism2_scan_results_proc_stop(struct seq_file *m, void *v)
-{
-	local_info_t *local = pde_data(file_inode(m->file));
-	spin_unlock_bh(&local->lock);
-}
-
-static const struct seq_operations prism2_scan_results_proc_seqops = {
-	.start	= prism2_scan_results_proc_start,
-	.next	= prism2_scan_results_proc_next,
-	.stop	= prism2_scan_results_proc_stop,
-	.show	= prism2_scan_results_proc_show,
-};
-#endif /* PRISM2_NO_STATION_MODES */
-
-
-void hostap_init_proc(local_info_t *local)
-{
-	local->proc = NULL;
-
-	if (hostap_proc == NULL) {
-		printk(KERN_WARNING "%s: hostap proc directory not created\n",
-		       local->dev->name);
-		return;
-	}
-
-	local->proc = proc_mkdir(local->ddev->name, hostap_proc);
-	if (local->proc == NULL) {
-		printk(KERN_INFO "/proc/net/hostap/%s creation failed\n",
-		       local->ddev->name);
-		return;
-	}
-
-#ifndef PRISM2_NO_PROCFS_DEBUG
-	proc_create_single_data("debug", 0, local->proc,
-			prism2_debug_proc_show, local);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-	proc_create_single_data("stats", 0, local->proc, prism2_stats_proc_show,
-			local);
-	proc_create_seq_data("wds", 0, local->proc,
-			&prism2_wds_proc_seqops, local);
-	proc_create_data("pda", 0, local->proc,
-			 &prism2_pda_proc_ops, local);
-	proc_create_data("aux_dump", 0, local->proc,
-			 local->func->read_aux_proc_ops ?: &prism2_aux_dump_proc_ops,
-			 local);
-	proc_create_seq_data("bss_list", 0, local->proc,
-			&prism2_bss_list_proc_seqops, local);
-	proc_create_single_data("crypt", 0, local->proc, prism2_crypt_proc_show,
-		local);
-#ifdef PRISM2_IO_DEBUG
-	proc_create_single_data("io_debug", 0, local->proc,
-			prism2_debug_proc_show, local);
-#endif /* PRISM2_IO_DEBUG */
-#ifndef PRISM2_NO_STATION_MODES
-	proc_create_seq_data("scan_results", 0, local->proc,
-			&prism2_scan_results_proc_seqops, local);
-#endif /* PRISM2_NO_STATION_MODES */
-}
-
-
-void hostap_remove_proc(local_info_t *local)
-{
-	proc_remove(local->proc);
-}
-
-
-EXPORT_SYMBOL(hostap_init_proc);
-EXPORT_SYMBOL(hostap_remove_proc);
diff --git a/drivers/net/wireless/intersil/hostap/hostap_wlan.h b/drivers/net/wireless/intersil/hostap/hostap_wlan.h
deleted file mode 100644
index f71c0545c0..0000000000
--- a/drivers/net/wireless/intersil/hostap/hostap_wlan.h
+++ /dev/null
@@ -1,1051 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_WLAN_H
-#define HOSTAP_WLAN_H
-
-#include <linux/interrupt.h>
-#include <linux/wireless.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/mutex.h>
-#include <linux/refcount.h>
-#include <net/iw_handler.h>
-#include <net/ieee80211_radiotap.h>
-#include <net/lib80211.h>
-
-#include "hostap_config.h"
-#include "hostap_common.h"
-
-#define MAX_PARM_DEVICES 8
-#define PARM_MIN_MAX "1-" __MODULE_STRING(MAX_PARM_DEVICES)
-#define DEF_INTS -1, -1, -1, -1, -1, -1, -1
-#define GET_INT_PARM(var,idx) var[var[idx] < 0 ? 0 : idx]
-
-
-/* Specific skb->protocol value that indicates that the packet already contains
- * txdesc header.
- * FIX: This might need own value that would be allocated especially for Prism2
- * txdesc; ETH_P_CONTROL is commented as "Card specific control frames".
- * However, these skb's should have only minimal path in the kernel side since
- * prism2_send_mgmt() sends these with dev_queue_xmit() to prism2_tx(). */
-#define ETH_P_HOSTAP ETH_P_CONTROL
-
-/* ARPHRD_IEEE80211_PRISM uses a bloated version of Prism2 RX frame header
- * (from linux-wlan-ng) */
-struct linux_wlan_ng_val {
-	u32 did;
-	u16 status, len;
-	u32 data;
-} __packed;
-
-struct linux_wlan_ng_prism_hdr {
-	u32 msgcode, msglen;
-	char devname[16];
-	struct linux_wlan_ng_val hosttime, mactime, channel, rssi, sq, signal,
-		noise, rate, istx, frmlen;
-} __packed;
-
-struct linux_wlan_ng_cap_hdr {
-	__be32 version;
-	__be32 length;
-	__be64 mactime;
-	__be64 hosttime;
-	__be32 phytype;
-	__be32 channel;
-	__be32 datarate;
-	__be32 antenna;
-	__be32 priority;
-	__be32 ssi_type;
-	__be32 ssi_signal;
-	__be32 ssi_noise;
-	__be32 preamble;
-	__be32 encoding;
-} __packed;
-
-struct hostap_radiotap_rx {
-	struct ieee80211_radiotap_header hdr;
-	__le64 tsft;
-	u8 rate;
-	u8 padding;
-	__le16 chan_freq;
-	__le16 chan_flags;
-	s8 dbm_antsignal;
-	s8 dbm_antnoise;
-} __packed;
-
-#define LWNG_CAP_DID_BASE   (4 | (1 << 6)) /* section 4, group 1 */
-#define LWNG_CAPHDR_VERSION 0x80211001
-
-struct hfa384x_rx_frame {
-	/* HFA384X RX frame descriptor */
-	__le16 status; /* HFA384X_RX_STATUS_ flags */
-	__le32 time; /* timestamp, 1 microsecond resolution */
-	u8 silence; /* 27 .. 154; seems to be 0 */
-	u8 signal; /* 27 .. 154 */
-	u8 rate; /* 10, 20, 55, or 110 */
-	u8 rxflow;
-	__le32 reserved;
-
-	/* 802.11 */
-	__le16 frame_control;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctrl;
-	u8 addr4[ETH_ALEN];
-	__le16 data_len;
-
-	/* 802.3 */
-	u8 dst_addr[ETH_ALEN];
-	u8 src_addr[ETH_ALEN];
-	__be16 len;
-
-	/* followed by frame data; max 2304 bytes */
-} __packed;
-
-
-struct hfa384x_tx_frame {
-	/* HFA384X TX frame descriptor */
-	__le16 status; /* HFA384X_TX_STATUS_ flags */
-	__le16 reserved1;
-	__le16 reserved2;
-	__le32 sw_support;
-	u8 retry_count; /* not yet implemented */
-	u8 tx_rate; /* Host AP only; 0 = firmware, or 10, 20, 55, 110 */
-	__le16 tx_control; /* HFA384X_TX_CTRL_ flags */
-
-	/* 802.11 */
-	struct_group(header,
-		__le16 frame_control; /* parts not used */
-		__le16 duration_id;
-		u8 addr1[ETH_ALEN];
-		u8 addr2[ETH_ALEN]; /* filled by firmware */
-		u8 addr3[ETH_ALEN];
-		__le16 seq_ctrl; /* filled by firmware */
-	);
-	u8 addr4[ETH_ALEN];
-	__le16 data_len;
-
-	/* 802.3 */
-	u8 dst_addr[ETH_ALEN];
-	u8 src_addr[ETH_ALEN];
-	__be16 len;
-
-	/* followed by frame data; max 2304 bytes */
-} __packed;
-
-
-struct hfa384x_rid_hdr
-{
-	__le16 len;
-	__le16 rid;
-} __packed;
-
-
-/* Macro for converting signal levels (range 27 .. 154) to wireless ext
- * dBm value with some accuracy */
-#define HFA384X_LEVEL_TO_dBm(v) 0x100 + (v) * 100 / 255 - 100
-
-#define HFA384X_LEVEL_TO_dBm_sign(v) (v) * 100 / 255 - 100
-
-struct hfa384x_scan_request {
-	__le16 channel_list;
-	__le16 txrate; /* HFA384X_RATES_* */
-} __packed;
-
-struct hfa384x_hostscan_request {
-	__le16 channel_list;
-	__le16 txrate;
-	__le16 target_ssid_len;
-	u8 target_ssid[32];
-} __packed;
-
-struct hfa384x_join_request {
-	u8 bssid[ETH_ALEN];
-	__le16 channel;
-} __packed;
-
-struct hfa384x_info_frame {
-	__le16 len;
-	__le16 type;
-} __packed;
-
-struct hfa384x_comm_tallies {
-	__le16 tx_unicast_frames;
-	__le16 tx_multicast_frames;
-	__le16 tx_fragments;
-	__le16 tx_unicast_octets;
-	__le16 tx_multicast_octets;
-	__le16 tx_deferred_transmissions;
-	__le16 tx_single_retry_frames;
-	__le16 tx_multiple_retry_frames;
-	__le16 tx_retry_limit_exceeded;
-	__le16 tx_discards;
-	__le16 rx_unicast_frames;
-	__le16 rx_multicast_frames;
-	__le16 rx_fragments;
-	__le16 rx_unicast_octets;
-	__le16 rx_multicast_octets;
-	__le16 rx_fcs_errors;
-	__le16 rx_discards_no_buffer;
-	__le16 tx_discards_wrong_sa;
-	__le16 rx_discards_wep_undecryptable;
-	__le16 rx_message_in_msg_fragments;
-	__le16 rx_message_in_bad_msg_fragments;
-} __packed;
-
-struct hfa384x_comm_tallies32 {
-	__le32 tx_unicast_frames;
-	__le32 tx_multicast_frames;
-	__le32 tx_fragments;
-	__le32 tx_unicast_octets;
-	__le32 tx_multicast_octets;
-	__le32 tx_deferred_transmissions;
-	__le32 tx_single_retry_frames;
-	__le32 tx_multiple_retry_frames;
-	__le32 tx_retry_limit_exceeded;
-	__le32 tx_discards;
-	__le32 rx_unicast_frames;
-	__le32 rx_multicast_frames;
-	__le32 rx_fragments;
-	__le32 rx_unicast_octets;
-	__le32 rx_multicast_octets;
-	__le32 rx_fcs_errors;
-	__le32 rx_discards_no_buffer;
-	__le32 tx_discards_wrong_sa;
-	__le32 rx_discards_wep_undecryptable;
-	__le32 rx_message_in_msg_fragments;
-	__le32 rx_message_in_bad_msg_fragments;
-} __packed;
-
-struct hfa384x_scan_result_hdr {
-	__le16 reserved;
-	__le16 scan_reason;
-#define HFA384X_SCAN_IN_PROGRESS 0 /* no results available yet */
-#define HFA384X_SCAN_HOST_INITIATED 1
-#define HFA384X_SCAN_FIRMWARE_INITIATED 2
-#define HFA384X_SCAN_INQUIRY_FROM_HOST 3
-} __packed;
-
-#define HFA384X_SCAN_MAX_RESULTS 32
-
-struct hfa384x_scan_result {
-	__le16 chid;
-	__le16 anl;
-	__le16 sl;
-	u8 bssid[ETH_ALEN];
-	__le16 beacon_interval;
-	__le16 capability;
-	__le16 ssid_len;
-	u8 ssid[32];
-	u8 sup_rates[10];
-	__le16 rate;
-} __packed;
-
-struct hfa384x_hostscan_result {
-	__le16 chid;
-	__le16 anl;
-	__le16 sl;
-	u8 bssid[ETH_ALEN];
-	__le16 beacon_interval;
-	__le16 capability;
-	__le16 ssid_len;
-	u8 ssid[32];
-	u8 sup_rates[10];
-	__le16 rate;
-	__le16 atim;
-} __packed;
-
-struct comm_tallies_sums {
-	unsigned int tx_unicast_frames;
-	unsigned int tx_multicast_frames;
-	unsigned int tx_fragments;
-	unsigned int tx_unicast_octets;
-	unsigned int tx_multicast_octets;
-	unsigned int tx_deferred_transmissions;
-	unsigned int tx_single_retry_frames;
-	unsigned int tx_multiple_retry_frames;
-	unsigned int tx_retry_limit_exceeded;
-	unsigned int tx_discards;
-	unsigned int rx_unicast_frames;
-	unsigned int rx_multicast_frames;
-	unsigned int rx_fragments;
-	unsigned int rx_unicast_octets;
-	unsigned int rx_multicast_octets;
-	unsigned int rx_fcs_errors;
-	unsigned int rx_discards_no_buffer;
-	unsigned int tx_discards_wrong_sa;
-	unsigned int rx_discards_wep_undecryptable;
-	unsigned int rx_message_in_msg_fragments;
-	unsigned int rx_message_in_bad_msg_fragments;
-};
-
-
-struct hfa384x_regs {
-	u16 cmd;
-	u16 evstat;
-	u16 offset0;
-	u16 offset1;
-	u16 swsupport0;
-};
-
-
-#if defined(PRISM2_PCCARD) || defined(PRISM2_PLX)
-/* I/O ports for HFA384X Controller access */
-#define HFA384X_CMD_OFF 0x00
-#define HFA384X_PARAM0_OFF 0x02
-#define HFA384X_PARAM1_OFF 0x04
-#define HFA384X_PARAM2_OFF 0x06
-#define HFA384X_STATUS_OFF 0x08
-#define HFA384X_RESP0_OFF 0x0A
-#define HFA384X_RESP1_OFF 0x0C
-#define HFA384X_RESP2_OFF 0x0E
-#define HFA384X_INFOFID_OFF 0x10
-#define HFA384X_CONTROL_OFF 0x14
-#define HFA384X_SELECT0_OFF 0x18
-#define HFA384X_SELECT1_OFF 0x1A
-#define HFA384X_OFFSET0_OFF 0x1C
-#define HFA384X_OFFSET1_OFF 0x1E
-#define HFA384X_RXFID_OFF 0x20
-#define HFA384X_ALLOCFID_OFF 0x22
-#define HFA384X_TXCOMPLFID_OFF 0x24
-#define HFA384X_SWSUPPORT0_OFF 0x28
-#define HFA384X_SWSUPPORT1_OFF 0x2A
-#define HFA384X_SWSUPPORT2_OFF 0x2C
-#define HFA384X_EVSTAT_OFF 0x30
-#define HFA384X_INTEN_OFF 0x32
-#define HFA384X_EVACK_OFF 0x34
-#define HFA384X_DATA0_OFF 0x36
-#define HFA384X_DATA1_OFF 0x38
-#define HFA384X_AUXPAGE_OFF 0x3A
-#define HFA384X_AUXOFFSET_OFF 0x3C
-#define HFA384X_AUXDATA_OFF 0x3E
-#endif /* PRISM2_PCCARD || PRISM2_PLX */
-
-#ifdef PRISM2_PCI
-/* Memory addresses for ISL3874 controller access */
-#define HFA384X_CMD_OFF 0x00
-#define HFA384X_PARAM0_OFF 0x04
-#define HFA384X_PARAM1_OFF 0x08
-#define HFA384X_PARAM2_OFF 0x0C
-#define HFA384X_STATUS_OFF 0x10
-#define HFA384X_RESP0_OFF 0x14
-#define HFA384X_RESP1_OFF 0x18
-#define HFA384X_RESP2_OFF 0x1C
-#define HFA384X_INFOFID_OFF 0x20
-#define HFA384X_CONTROL_OFF 0x28
-#define HFA384X_SELECT0_OFF 0x30
-#define HFA384X_SELECT1_OFF 0x34
-#define HFA384X_OFFSET0_OFF 0x38
-#define HFA384X_OFFSET1_OFF 0x3C
-#define HFA384X_RXFID_OFF 0x40
-#define HFA384X_ALLOCFID_OFF 0x44
-#define HFA384X_TXCOMPLFID_OFF 0x48
-#define HFA384X_PCICOR_OFF 0x4C
-#define HFA384X_SWSUPPORT0_OFF 0x50
-#define HFA384X_SWSUPPORT1_OFF 0x54
-#define HFA384X_SWSUPPORT2_OFF 0x58
-#define HFA384X_PCIHCR_OFF 0x5C
-#define HFA384X_EVSTAT_OFF 0x60
-#define HFA384X_INTEN_OFF 0x64
-#define HFA384X_EVACK_OFF 0x68
-#define HFA384X_DATA0_OFF 0x6C
-#define HFA384X_DATA1_OFF 0x70
-#define HFA384X_AUXPAGE_OFF 0x74
-#define HFA384X_AUXOFFSET_OFF 0x78
-#define HFA384X_AUXDATA_OFF 0x7C
-#define HFA384X_PCI_M0_ADDRH_OFF 0x80
-#define HFA384X_PCI_M0_ADDRL_OFF 0x84
-#define HFA384X_PCI_M0_LEN_OFF 0x88
-#define HFA384X_PCI_M0_CTL_OFF 0x8C
-#define HFA384X_PCI_STATUS_OFF 0x98
-#define HFA384X_PCI_M1_ADDRH_OFF 0xA0
-#define HFA384X_PCI_M1_ADDRL_OFF 0xA4
-#define HFA384X_PCI_M1_LEN_OFF 0xA8
-#define HFA384X_PCI_M1_CTL_OFF 0xAC
-
-/* PCI bus master control bits (these are undocumented; based on guessing and
- * experimenting..) */
-#define HFA384X_PCI_CTL_FROM_BAP (BIT(5) | BIT(1) | BIT(0))
-#define HFA384X_PCI_CTL_TO_BAP (BIT(5) | BIT(0))
-
-#endif /* PRISM2_PCI */
-
-
-/* Command codes for CMD reg. */
-#define HFA384X_CMDCODE_INIT 0x00
-#define HFA384X_CMDCODE_ENABLE 0x01
-#define HFA384X_CMDCODE_DISABLE 0x02
-#define HFA384X_CMDCODE_ALLOC 0x0A
-#define HFA384X_CMDCODE_TRANSMIT 0x0B
-#define HFA384X_CMDCODE_INQUIRE 0x11
-#define HFA384X_CMDCODE_ACCESS 0x21
-#define HFA384X_CMDCODE_ACCESS_WRITE (0x21 | BIT(8))
-#define HFA384X_CMDCODE_DOWNLOAD 0x22
-#define HFA384X_CMDCODE_READMIF 0x30
-#define HFA384X_CMDCODE_WRITEMIF 0x31
-#define HFA384X_CMDCODE_TEST 0x38
-
-#define HFA384X_CMDCODE_MASK 0x3F
-
-/* Test mode operations */
-#define HFA384X_TEST_CHANGE_CHANNEL 0x08
-#define HFA384X_TEST_MONITOR 0x0B
-#define HFA384X_TEST_STOP 0x0F
-#define HFA384X_TEST_CFG_BITS 0x15
-#define HFA384X_TEST_CFG_BIT_ALC BIT(3)
-
-#define HFA384X_CMD_BUSY BIT(15)
-
-#define HFA384X_CMD_TX_RECLAIM BIT(8)
-
-#define HFA384X_OFFSET_ERR BIT(14)
-#define HFA384X_OFFSET_BUSY BIT(15)
-
-
-/* ProgMode for download command */
-#define HFA384X_PROGMODE_DISABLE 0
-#define HFA384X_PROGMODE_ENABLE_VOLATILE 1
-#define HFA384X_PROGMODE_ENABLE_NON_VOLATILE 2
-#define HFA384X_PROGMODE_PROGRAM_NON_VOLATILE 3
-
-#define HFA384X_AUX_MAGIC0 0xfe01
-#define HFA384X_AUX_MAGIC1 0xdc23
-#define HFA384X_AUX_MAGIC2 0xba45
-
-#define HFA384X_AUX_PORT_DISABLED 0
-#define HFA384X_AUX_PORT_DISABLE BIT(14)
-#define HFA384X_AUX_PORT_ENABLE BIT(15)
-#define HFA384X_AUX_PORT_ENABLED (BIT(14) | BIT(15))
-#define HFA384X_AUX_PORT_MASK (BIT(14) | BIT(15))
-
-#define PRISM2_PDA_SIZE 1024
-
-
-/* Events; EvStat, Interrupt mask (IntEn), and acknowledge bits (EvAck) */
-#define HFA384X_EV_TICK BIT(15)
-#define HFA384X_EV_WTERR BIT(14)
-#define HFA384X_EV_INFDROP BIT(13)
-#ifdef PRISM2_PCI
-#define HFA384X_EV_PCI_M1 BIT(9)
-#define HFA384X_EV_PCI_M0 BIT(8)
-#endif /* PRISM2_PCI */
-#define HFA384X_EV_INFO BIT(7)
-#define HFA384X_EV_DTIM BIT(5)
-#define HFA384X_EV_CMD BIT(4)
-#define HFA384X_EV_ALLOC BIT(3)
-#define HFA384X_EV_TXEXC BIT(2)
-#define HFA384X_EV_TX BIT(1)
-#define HFA384X_EV_RX BIT(0)
-
-
-/* HFA384X Information frames */
-#define HFA384X_INFO_HANDOVERADDR 0xF000 /* AP f/w ? */
-#define HFA384X_INFO_HANDOVERDEAUTHADDR 0xF001 /* AP f/w 1.3.7 */
-#define HFA384X_INFO_COMMTALLIES 0xF100
-#define HFA384X_INFO_SCANRESULTS 0xF101
-#define HFA384X_INFO_CHANNELINFORESULTS 0xF102 /* AP f/w only */
-#define HFA384X_INFO_HOSTSCANRESULTS 0xF103
-#define HFA384X_INFO_LINKSTATUS 0xF200
-#define HFA384X_INFO_ASSOCSTATUS 0xF201 /* ? */
-#define HFA384X_INFO_AUTHREQ 0xF202 /* ? */
-#define HFA384X_INFO_PSUSERCNT 0xF203 /* ? */
-#define HFA384X_INFO_KEYIDCHANGED 0xF204 /* ? */
-
-enum { HFA384X_LINKSTATUS_CONNECTED = 1,
-       HFA384X_LINKSTATUS_DISCONNECTED = 2,
-       HFA384X_LINKSTATUS_AP_CHANGE = 3,
-       HFA384X_LINKSTATUS_AP_OUT_OF_RANGE = 4,
-       HFA384X_LINKSTATUS_AP_IN_RANGE = 5,
-       HFA384X_LINKSTATUS_ASSOC_FAILED = 6 };
-
-enum { HFA384X_PORTTYPE_BSS = 1, HFA384X_PORTTYPE_WDS = 2,
-       HFA384X_PORTTYPE_PSEUDO_IBSS = 3, HFA384X_PORTTYPE_IBSS = 0,
-       HFA384X_PORTTYPE_HOSTAP = 6 };
-
-#define HFA384X_RATES_1MBPS BIT(0)
-#define HFA384X_RATES_2MBPS BIT(1)
-#define HFA384X_RATES_5MBPS BIT(2)
-#define HFA384X_RATES_11MBPS BIT(3)
-
-#define HFA384X_ROAMING_FIRMWARE 1
-#define HFA384X_ROAMING_HOST 2
-#define HFA384X_ROAMING_DISABLED 3
-
-#define HFA384X_WEPFLAGS_PRIVACYINVOKED BIT(0)
-#define HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED BIT(1)
-#define HFA384X_WEPFLAGS_HOSTENCRYPT BIT(4)
-#define HFA384X_WEPFLAGS_HOSTDECRYPT BIT(7)
-
-#define HFA384X_RX_STATUS_MSGTYPE (BIT(15) | BIT(14) | BIT(13))
-#define HFA384X_RX_STATUS_PCF BIT(12)
-#define HFA384X_RX_STATUS_MACPORT (BIT(10) | BIT(9) | BIT(8))
-#define HFA384X_RX_STATUS_UNDECR BIT(1)
-#define HFA384X_RX_STATUS_FCSERR BIT(0)
-
-#define HFA384X_RX_STATUS_GET_MSGTYPE(s) \
-(((s) & HFA384X_RX_STATUS_MSGTYPE) >> 13)
-#define HFA384X_RX_STATUS_GET_MACPORT(s) \
-(((s) & HFA384X_RX_STATUS_MACPORT) >> 8)
-
-enum { HFA384X_RX_MSGTYPE_NORMAL = 0, HFA384X_RX_MSGTYPE_RFC1042 = 1,
-       HFA384X_RX_MSGTYPE_BRIDGETUNNEL = 2, HFA384X_RX_MSGTYPE_MGMT = 4 };
-
-
-#define HFA384X_TX_CTRL_ALT_RTRY BIT(5)
-#define HFA384X_TX_CTRL_802_11 BIT(3)
-#define HFA384X_TX_CTRL_802_3 0
-#define HFA384X_TX_CTRL_TX_EX BIT(2)
-#define HFA384X_TX_CTRL_TX_OK BIT(1)
-
-#define HFA384X_TX_STATUS_RETRYERR BIT(0)
-#define HFA384X_TX_STATUS_AGEDERR BIT(1)
-#define HFA384X_TX_STATUS_DISCON BIT(2)
-#define HFA384X_TX_STATUS_FORMERR BIT(3)
-
-/* HFA3861/3863 (BBP) Control Registers */
-#define HFA386X_CR_TX_CONFIGURE 0x12 /* CR9 */
-#define HFA386X_CR_RX_CONFIGURE 0x14 /* CR10 */
-#define HFA386X_CR_A_D_TEST_MODES2 0x1A /* CR13 */
-#define HFA386X_CR_MANUAL_TX_POWER 0x3E /* CR31 */
-#define HFA386X_CR_MEASURED_TX_POWER 0x74 /* CR58 */
-
-
-#ifdef __KERNEL__
-
-#define PRISM2_TXFID_COUNT 8
-#define PRISM2_DATA_MAXLEN 2304
-#define PRISM2_TXFID_LEN (PRISM2_DATA_MAXLEN + sizeof(struct hfa384x_tx_frame))
-#define PRISM2_TXFID_EMPTY 0xffff
-#define PRISM2_TXFID_RESERVED 0xfffe
-#define PRISM2_DUMMY_FID 0xffff
-#define MAX_SSID_LEN 32
-#define MAX_NAME_LEN 32 /* this is assumed to be equal to MAX_SSID_LEN */
-
-#define PRISM2_DUMP_RX_HDR BIT(0)
-#define PRISM2_DUMP_TX_HDR BIT(1)
-#define PRISM2_DUMP_TXEXC_HDR BIT(2)
-
-struct hostap_tx_callback_info {
-	u16 idx;
-	void (*func)(struct sk_buff *, int ok, void *);
-	void *data;
-	struct hostap_tx_callback_info *next;
-};
-
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
-#define PRISM2_FRAG_CACHE_LEN 4
-
-struct prism2_frag_entry {
-	unsigned long first_frag_time;
-	unsigned int seq;
-	unsigned int last_frag;
-	struct sk_buff *skb;
-	u8 src_addr[ETH_ALEN];
-	u8 dst_addr[ETH_ALEN];
-};
-
-
-struct hostap_cmd_queue {
-	struct list_head list;
-	wait_queue_head_t compl;
-	volatile enum { CMD_SLEEP, CMD_CALLBACK, CMD_COMPLETED } type;
-	void (*callback)(struct net_device *dev, long context, u16 resp0,
-			 u16 res);
-	long context;
-	u16 cmd, param0, param1;
-	u16 resp0, res;
-	volatile int issued, issuing;
-
-	refcount_t usecnt;
-	int del_req;
-};
-
-/* options for hw_shutdown */
-#define HOSTAP_HW_NO_DISABLE BIT(0)
-#define HOSTAP_HW_ENABLE_CMDCOMPL BIT(1)
-
-typedef struct local_info local_info_t;
-
-struct prism2_helper_functions {
-	/* these functions are defined in hardware model specific files
-	 * (hostap_{cs,plx,pci}.c */
-	int (*card_present)(local_info_t *local);
-	void (*cor_sreset)(local_info_t *local);
-	void (*genesis_reset)(local_info_t *local, int hcr);
-
-	/* the following functions are from hostap_hw.c, but they may have some
-	 * hardware model specific code */
-
-	/* FIX: low-level commands like cmd might disappear at some point to
-	 * make it easier to change them if needed (e.g., cmd would be replaced
-	 * with write_mif/read_mif/testcmd/inquire); at least get_rid and
-	 * set_rid might move to hostap_{cs,plx,pci}.c */
-	int (*cmd)(struct net_device *dev, u16 cmd, u16 param0, u16 *param1,
-		   u16 *resp0);
-	void (*read_regs)(struct net_device *dev, struct hfa384x_regs *regs);
-	int (*get_rid)(struct net_device *dev, u16 rid, void *buf, int len,
-		       int exact_len);
-	int (*set_rid)(struct net_device *dev, u16 rid, void *buf, int len);
-	int (*hw_enable)(struct net_device *dev, int initial);
-	int (*hw_config)(struct net_device *dev, int initial);
-	void (*hw_reset)(struct net_device *dev);
-	void (*hw_shutdown)(struct net_device *dev, int no_disable);
-	int (*reset_port)(struct net_device *dev);
-	void (*schedule_reset)(local_info_t *local);
-	int (*download)(local_info_t *local,
-			struct prism2_download_param *param);
-	int (*tx)(struct sk_buff *skb, struct net_device *dev);
-	int (*set_tim)(struct net_device *dev, int aid, int set);
-	const struct proc_ops *read_aux_proc_ops;
-
-	int need_tx_headroom; /* number of bytes of headroom needed before
-			       * IEEE 802.11 header */
-	enum { HOSTAP_HW_PCCARD, HOSTAP_HW_PLX, HOSTAP_HW_PCI } hw_type;
-};
-
-
-struct prism2_download_data {
-	u32 dl_cmd;
-	u32 start_addr;
-	u32 num_areas;
-	struct prism2_download_data_area {
-		u32 addr; /* wlan card address */
-		u32 len;
-		u8 *data; /* allocated data */
-	} data[] __counted_by(num_areas);
-};
-
-
-#define HOSTAP_MAX_BSS_COUNT 64
-#define MAX_WPA_IE_LEN 64
-
-struct hostap_bss_info {
-	struct list_head list;
-	unsigned long last_update;
-	unsigned int count;
-	u8 bssid[ETH_ALEN];
-	u16 capab_info;
-	u8 ssid[32];
-	size_t ssid_len;
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-	u8 rsn_ie[MAX_WPA_IE_LEN];
-	size_t rsn_ie_len;
-	int chan;
-	int included;
-};
-
-
-/* Per radio private Host AP data - shared by all net devices interfaces used
- * by each radio (wlan#, wlan#ap, wlan#sta, WDS).
- * ((struct hostap_interface *) netdev_priv(dev))->local points to this
- * structure. */
-struct local_info {
-	struct module *hw_module;
-	int card_idx;
-	int dev_enabled;
-	int master_dev_auto_open; /* was master device opened automatically */
-	int num_dev_open; /* number of open devices */
-	struct net_device *dev; /* master radio device */
-	struct net_device *ddev; /* main data device */
-	struct list_head hostap_interfaces; /* Host AP interface list (contains
-					     * struct hostap_interface entries)
-					     */
-	rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock
-			      * when removing entries from the list.
-			      * TX and RX paths can use read lock. */
-	spinlock_t cmdlock, baplock, lock, irq_init_lock;
-	struct mutex rid_bap_mtx;
-	u16 infofid; /* MAC buffer id for info frame */
-	/* txfid, intransmitfid, next_txtid, and next_alloc are protected by
-	 * txfidlock */
-	spinlock_t txfidlock;
-	int txfid_len; /* length of allocated TX buffers */
-	u16 txfid[PRISM2_TXFID_COUNT]; /* buffer IDs for TX frames */
-	/* buffer IDs for intransmit frames or PRISM2_TXFID_EMPTY if
-	 * corresponding txfid is free for next TX frame */
-	u16 intransmitfid[PRISM2_TXFID_COUNT];
-	int next_txfid; /* index to the next txfid to be checked for
-			 * availability */
-	int next_alloc; /* index to the next intransmitfid to be checked for
-			 * allocation events */
-
-	/* bitfield for atomic bitops */
-#define HOSTAP_BITS_TRANSMIT 0
-#define HOSTAP_BITS_BAP_TASKLET 1
-#define HOSTAP_BITS_BAP_TASKLET2 2
-	unsigned long bits;
-
-	struct ap_data *ap;
-
-	char essid[MAX_SSID_LEN + 1];
-	char name[MAX_NAME_LEN + 1];
-	int name_set;
-	u16 channel_mask; /* mask of allowed channels */
-	u16 scan_channel_mask; /* mask of channels to be scanned */
-	struct comm_tallies_sums comm_tallies;
-	struct proc_dir_entry *proc;
-	int iw_mode; /* operating mode (IW_MODE_*) */
-	int pseudo_adhoc; /* 0: IW_MODE_ADHOC is real 802.11 compliant IBSS
-			   * 1: IW_MODE_ADHOC is "pseudo IBSS" */
-	char bssid[ETH_ALEN];
-	int channel;
-	int beacon_int;
-	int dtim_period;
-	int mtu;
-	int frame_dump; /* dump RX/TX frame headers, PRISM2_DUMP_ flags */
-	int fw_tx_rate_control;
-	u16 tx_rate_control;
-	u16 basic_rates;
-	int hw_resetting;
-	int hw_ready;
-	int hw_reset_tries; /* how many times reset has been tried */
-	int hw_downloading;
-	int shutdown;
-	int pri_only;
-	int no_pri; /* no PRI f/w present */
-	int sram_type; /* 8 = x8 SRAM, 16 = x16 SRAM, -1 = unknown */
-
-	enum {
-		PRISM2_TXPOWER_AUTO = 0, PRISM2_TXPOWER_OFF,
-		PRISM2_TXPOWER_FIXED, PRISM2_TXPOWER_UNKNOWN
-	} txpower_type;
-	int txpower; /* if txpower_type == PRISM2_TXPOWER_FIXED */
-
-	/* command queue for hfa384x_cmd(); protected with cmdlock */
-	struct list_head cmd_queue;
-	/* max_len for cmd_queue; in addition, cmd_callback can use two
-	 * additional entries to prevent sleeping commands from stopping
-	 * transmits */
-#define HOSTAP_CMD_QUEUE_MAX_LEN 16
-	int cmd_queue_len; /* number of entries in cmd_queue */
-
-	/* if card timeout is detected in interrupt context, reset_queue is
-	 * used to schedule card reseting to be done in user context */
-	struct work_struct reset_queue;
-
-	/* For scheduling a change of the promiscuous mode RID */
-	int is_promisc;
-	struct work_struct set_multicast_list_queue;
-
-	struct work_struct set_tim_queue;
-	struct list_head set_tim_list;
-	spinlock_t set_tim_lock;
-
-	int wds_max_connections;
-	int wds_connections;
-#define HOSTAP_WDS_BROADCAST_RA BIT(0)
-#define HOSTAP_WDS_AP_CLIENT BIT(1)
-#define HOSTAP_WDS_STANDARD_FRAME BIT(2)
-	u32 wds_type;
-	u16 tx_control; /* flags to be used in TX description */
-	int manual_retry_count; /* -1 = use f/w default; otherwise retry count
-				 * to be used with all frames */
-
-	struct iw_statistics wstats;
-	unsigned long scan_timestamp; /* Time started to scan */
-	enum {
-		PRISM2_MONITOR_80211 = 0, PRISM2_MONITOR_PRISM = 1,
-		PRISM2_MONITOR_CAPHDR = 2, PRISM2_MONITOR_RADIOTAP = 3
-	} monitor_type;
-	int monitor_allow_fcserr;
-
-	int hostapd; /* whether user space daemon, hostapd, is used for AP
-		      * management */
-	int hostapd_sta; /* whether hostapd is used with an extra STA interface
-			  */
-	struct net_device *apdev;
-	struct net_device_stats apdevstats;
-
-	char assoc_ap_addr[ETH_ALEN];
-	struct net_device *stadev;
-	struct net_device_stats stadevstats;
-
-#define WEP_KEYS 4
-#define WEP_KEY_LEN 13
-	struct lib80211_crypt_info crypt_info;
-
-	int open_wep; /* allow unencrypted frames */
-	int host_encrypt;
-	int host_decrypt;
-	int privacy_invoked; /* force privacy invoked flag even if no keys are
-			      * configured */
-	int fw_encrypt_ok; /* whether firmware-based WEP encrypt is working
-			    * in Host AP mode (STA f/w 1.4.9 or newer) */
-	int bcrx_sta_key; /* use individual keys to override default keys even
-			   * with RX of broad/multicast frames */
-
-	struct prism2_frag_entry frag_cache[PRISM2_FRAG_CACHE_LEN];
-	unsigned int frag_next_idx;
-
-	int ieee_802_1x; /* is IEEE 802.1X used */
-
-	int antsel_tx, antsel_rx;
-	int rts_threshold; /* dot11RTSThreshold */
-	int fragm_threshold; /* dot11FragmentationThreshold */
-	int auth_algs; /* PRISM2_AUTH_ flags */
-
-	int enh_sec; /* cnfEnhSecurity options (broadcast SSID hide/ignore) */
-	int tallies32; /* 32-bit tallies in use */
-
-	struct prism2_helper_functions *func;
-
-	u8 *pda;
-	int fw_ap;
-#define PRISM2_FW_VER(major, minor, variant) \
-(((major) << 16) | ((minor) << 8) | variant)
-	u32 sta_fw_ver;
-
-	/* Tasklets for handling hardware IRQ related operations outside hw IRQ
-	 * handler */
-	struct tasklet_struct bap_tasklet;
-
-	struct tasklet_struct info_tasklet;
-	struct sk_buff_head info_list; /* info frames as skb's for
-					* info_tasklet */
-
-	struct hostap_tx_callback_info *tx_callback; /* registered TX callbacks
-						      */
-
-	struct tasklet_struct rx_tasklet;
-	struct sk_buff_head rx_list;
-
-	struct tasklet_struct sta_tx_exc_tasklet;
-	struct sk_buff_head sta_tx_exc_list;
-
-	int host_roaming;
-	unsigned long last_join_time; /* time of last JoinRequest */
-	struct hfa384x_hostscan_result *last_scan_results;
-	int last_scan_results_count;
-	enum { PRISM2_SCAN, PRISM2_HOSTSCAN } last_scan_type;
-	struct work_struct info_queue;
-	unsigned long pending_info; /* bit field of pending info_queue items */
-#define PRISM2_INFO_PENDING_LINKSTATUS 0
-#define PRISM2_INFO_PENDING_SCANRESULTS 1
-	int prev_link_status; /* previous received LinkStatus info */
-	int prev_linkstatus_connected;
-	u8 preferred_ap[ETH_ALEN]; /* use this AP if possible */
-
-#ifdef PRISM2_CALLBACK
-	void *callback_data; /* Can be used in callbacks; e.g., allocate
-			      * on enable event and free on disable event.
-			      * Host AP driver code does not touch this. */
-#endif /* PRISM2_CALLBACK */
-
-	wait_queue_head_t hostscan_wq;
-
-	/* Passive scan in Host AP mode */
-	struct timer_list passive_scan_timer;
-	int passive_scan_interval; /* in seconds, 0 = disabled */
-	int passive_scan_channel;
-	enum { PASSIVE_SCAN_WAIT, PASSIVE_SCAN_LISTEN } passive_scan_state;
-
-	struct timer_list tick_timer;
-	unsigned long last_tick_timer;
-	unsigned int sw_tick_stuck;
-
-	/* commsQuality / dBmCommsQuality data from periodic polling; only
-	 * valid for Managed and Ad-hoc modes */
-	unsigned long last_comms_qual_update;
-	int comms_qual; /* in some odd unit.. */
-	int avg_signal; /* in dB (note: negative) */
-	int avg_noise; /* in dB (note: negative) */
-	struct work_struct comms_qual_update;
-
-	/* RSSI to dBm adjustment (for RX descriptor fields) */
-	int rssi_to_dBm; /* subtract from RSSI to get approximate dBm value */
-
-	/* BSS list / protected by local->lock */
-	struct list_head bss_list;
-	int num_bss_info;
-	int wpa; /* WPA support enabled */
-	int tkip_countermeasures;
-	int drop_unencrypted;
-	/* Generic IEEE 802.11 info element to be added to
-	 * ProbeResp/Beacon/(Re)AssocReq */
-	u8 *generic_elem;
-	size_t generic_elem_len;
-
-#ifdef PRISM2_DOWNLOAD_SUPPORT
-	/* Persistent volatile download data */
-	struct prism2_download_data *dl_pri;
-	struct prism2_download_data *dl_sec;
-#endif /* PRISM2_DOWNLOAD_SUPPORT */
-
-#ifdef PRISM2_IO_DEBUG
-#define PRISM2_IO_DEBUG_SIZE 10000
-	u32 io_debug[PRISM2_IO_DEBUG_SIZE];
-	int io_debug_head;
-	int io_debug_enabled;
-#endif /* PRISM2_IO_DEBUG */
-
-	/* Pointer to hardware model specific (cs,pci,plx) private data. */
-	void *hw_priv;
-};
-
-
-/* Per interface private Host AP data
- * Allocated for each net device that Host AP uses (wlan#, wlan#ap, wlan#sta,
- * WDS) and netdev_priv(dev) points to this structure. */
-struct hostap_interface {
-	struct list_head list; /* list entry in Host AP interface list */
-	struct net_device *dev; /* pointer to this device */
-	struct local_info *local; /* pointer to shared private data */
-	struct net_device_stats stats;
-	struct iw_spy_data spy_data; /* iwspy support */
-	struct iw_public_data wireless_data;
-
-	enum {
-		HOSTAP_INTERFACE_MASTER,
-		HOSTAP_INTERFACE_MAIN,
-		HOSTAP_INTERFACE_AP,
-		HOSTAP_INTERFACE_STA,
-		HOSTAP_INTERFACE_WDS,
-	} type;
-
-	union {
-		struct hostap_interface_wds {
-			u8 remote_addr[ETH_ALEN];
-		} wds;
-	} u;
-};
-
-
-#define HOSTAP_SKB_TX_DATA_MAGIC 0xf08a36a2
-
-/*
- * TX meta data - stored in skb->cb buffer, so this must not be increased over
- * the 48-byte limit.
- * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE
- * TO SEE THE DAY.
- */
-struct hostap_skb_tx_data {
-	unsigned int __padding_for_default_qdiscs;
-	u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */
-	u8 rate; /* transmit rate */
-#define HOSTAP_TX_FLAGS_WDS BIT(0)
-#define HOSTAP_TX_FLAGS_BUFFERED_FRAME BIT(1)
-#define HOSTAP_TX_FLAGS_ADD_MOREDATA BIT(2)
-	u8 flags; /* HOSTAP_TX_FLAGS_* */
-	u16 tx_cb_idx;
-	struct hostap_interface *iface;
-	unsigned long jiffies; /* queueing timestamp */
-	unsigned short ethertype;
-};
-
-
-#ifndef PRISM2_NO_DEBUG
-
-#define DEBUG_FID BIT(0)
-#define DEBUG_PS BIT(1)
-#define DEBUG_FLOW BIT(2)
-#define DEBUG_AP BIT(3)
-#define DEBUG_HW BIT(4)
-#define DEBUG_EXTRA BIT(5)
-#define DEBUG_EXTRA2 BIT(6)
-#define DEBUG_PS2 BIT(7)
-#define DEBUG_MASK (DEBUG_PS | DEBUG_AP | DEBUG_HW | DEBUG_EXTRA)
-#define PDEBUG(n, args...) \
-do { if ((n) & DEBUG_MASK) printk(KERN_DEBUG args); } while (0)
-#define PDEBUG2(n, args...) \
-do { if ((n) & DEBUG_MASK) printk(args); } while (0)
-
-#else /* PRISM2_NO_DEBUG */
-
-#define PDEBUG(n, args...)
-#define PDEBUG2(n, args...)
-
-#endif /* PRISM2_NO_DEBUG */
-
-enum { BAP0 = 0, BAP1 = 1 };
-
-#define PRISM2_IO_DEBUG_CMD_INB 0
-#define PRISM2_IO_DEBUG_CMD_INW 1
-#define PRISM2_IO_DEBUG_CMD_INSW 2
-#define PRISM2_IO_DEBUG_CMD_OUTB 3
-#define PRISM2_IO_DEBUG_CMD_OUTW 4
-#define PRISM2_IO_DEBUG_CMD_OUTSW 5
-#define PRISM2_IO_DEBUG_CMD_ERROR 6
-#define PRISM2_IO_DEBUG_CMD_INTERRUPT 7
-
-#ifdef PRISM2_IO_DEBUG
-
-#define PRISM2_IO_DEBUG_ENTRY(cmd, reg, value) \
-(((cmd) << 24) | ((reg) << 16) | value)
-
-static inline void prism2_io_debug_add(struct net_device *dev, int cmd,
-				       int reg, int value)
-{
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-
-	if (!local->io_debug_enabled)
-		return;
-
-	local->io_debug[local->io_debug_head] =	jiffies & 0xffffffff;
-	if (++local->io_debug_head >= PRISM2_IO_DEBUG_SIZE)
-		local->io_debug_head = 0;
-	local->io_debug[local->io_debug_head] =
-		PRISM2_IO_DEBUG_ENTRY(cmd, reg, value);
-	if (++local->io_debug_head >= PRISM2_IO_DEBUG_SIZE)
-		local->io_debug_head = 0;
-}
-
-
-static inline void prism2_io_debug_error(struct net_device *dev, int err)
-{
-	struct hostap_interface *iface = netdev_priv(dev);
-	local_info_t *local = iface->local;
-	unsigned long flags;
-
-	if (!local->io_debug_enabled)
-		return;
-
-	spin_lock_irqsave(&local->lock, flags);
-	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_ERROR, 0, err);
-	if (local->io_debug_enabled == 1) {
-		local->io_debug_enabled = 0;
-		printk(KERN_DEBUG "%s: I/O debug stopped\n", dev->name);
-	}
-	spin_unlock_irqrestore(&local->lock, flags);
-}
-
-#else /* PRISM2_IO_DEBUG */
-
-static inline void prism2_io_debug_add(struct net_device *dev, int cmd,
-				       int reg, int value)
-{
-}
-
-static inline void prism2_io_debug_error(struct net_device *dev, int err)
-{
-}
-
-#endif /* PRISM2_IO_DEBUG */
-
-
-#ifdef PRISM2_CALLBACK
-enum {
-	/* Called when card is enabled */
-	PRISM2_CALLBACK_ENABLE,
-
-	/* Called when card is disabled */
-	PRISM2_CALLBACK_DISABLE,
-
-	/* Called when RX/TX starts/ends */
-	PRISM2_CALLBACK_RX_START, PRISM2_CALLBACK_RX_END,
-	PRISM2_CALLBACK_TX_START, PRISM2_CALLBACK_TX_END
-};
-void prism2_callback(local_info_t *local, int event);
-#else /* PRISM2_CALLBACK */
-#define prism2_callback(d, e) do { } while (0)
-#endif /* PRISM2_CALLBACK */
-
-#endif /* __KERNEL__ */
-
-#endif /* HOSTAP_WLAN_H */
diff --git a/drivers/net/wireless/intersil/orinoco/Kconfig b/drivers/net/wireless/intersil/orinoco/Kconfig
deleted file mode 100644
index f62730aa7b..0000000000
--- a/drivers/net/wireless/intersil/orinoco/Kconfig
+++ /dev/null
@@ -1,143 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config HERMES
-	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
-	depends on (PPC_PMAC || PCI || PCMCIA)
-	depends on CFG80211
-	select CFG80211_WEXT_EXPORT
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	select FW_LOADER
-	select CRYPTO
-	select CRYPTO_MICHAEL_MIC
-	help
-	  A driver for 802.11b wireless cards based on the "Hermes" or
-	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
-	  majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
-	  - except for the Cisco/Aironet cards.  Cards supported include the
-	  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
-	  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
-	  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
-	  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
-	  IPW2011, and Symbol Spectrum24 High Rate amongst others.
-
-	  This option includes the guts of the driver, but in order to
-	  actually use a card you will also need to enable support for PCMCIA
-	  Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
-
-	  You will also very likely also need the Wireless Tools in order to
-	  configure your card and that /etc/pcmcia/wireless.opts works :
-	  <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
-
-config HERMES_PRISM
-	bool "Support Prism 2/2.5 chipset"
-	depends on HERMES
-	help
-
-	  Say Y to enable support for Prism 2 and 2.5 chipsets.  These
-	  chipsets are better handled by the hostap driver.  This driver
-	  would not support WPA or firmware download for Prism chipset.
-
-	  If you are not sure, say N.
-
-config HERMES_CACHE_FW_ON_INIT
-	bool "Cache Hermes firmware on driver initialisation"
-	depends on HERMES
-	default y
-	help
-	  Say Y to cache any firmware required by the Hermes drivers
-	  on startup.  The firmware will remain cached until the
-	  driver is unloaded.  The cache uses 64K of RAM.
-
-	  Otherwise load the firmware from userspace as required.  In
-	  this case the driver should be unloaded and restarted
-	  whenever the firmware is changed.
-
-	  If you are not sure, say Y.
-
-config APPLE_AIRPORT
-	tristate "Apple Airport support (built-in)"
-	depends on PPC_PMAC && HERMES
-	help
-	  Say Y here to support the Airport 802.11b wireless Ethernet hardware
-	  built into the Macintosh iBook and other recent PowerPC-based
-	  Macintosh machines. This is essentially a Lucent Orinoco card with
-	  a non-standard interface.
-
-	  This driver does not support the Airport Extreme (802.11b/g). Use
-	  the BCM43xx driver for Airport Extreme cards.
-
-config PLX_HERMES
-	tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
-	depends on PCI && HERMES
-	help
-	  Enable support for PCMCIA cards supported by the "Hermes" (aka
-	  orinoco) driver when used in PLX9052 based PCI adaptors.  These
-	  adaptors are not a full PCMCIA controller but act as a more limited
-	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
-	  802.11b PCMCIA cards can be used in desktop machines.  The Netgear
-	  MA301 is such an adaptor.
-
-config TMD_HERMES
-	tristate "Hermes in TMD7160 based PCI adaptor support"
-	depends on PCI && HERMES
-	help
-	  Enable support for PCMCIA cards supported by the "Hermes" (aka
-	  orinoco) driver when used in TMD7160 based PCI adaptors.  These
-	  adaptors are not a full PCMCIA controller but act as a more limited
-	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
-	  802.11b PCMCIA cards can be used in desktop machines.
-
-config NORTEL_HERMES
-	tristate "Nortel emobility PCI adaptor support"
-	depends on PCI && HERMES
-	help
-	  Enable support for PCMCIA cards supported by the "Hermes" (aka
-	  orinoco) driver when used in Nortel emobility PCI adaptors.  These
-	  adaptors are not full PCMCIA controllers, but act as a more limited
-	  PCI <-> PCMCIA bridge.
-
-config PCI_HERMES
-	tristate "Prism 2.5 PCI 802.11b adaptor support"
-	depends on PCI && HERMES && HERMES_PRISM
-	help
-	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on
-	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
-	  PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
-	  common.  Some of the built-in wireless adaptors in laptops are of
-	  this variety.
-
-config PCMCIA_HERMES
-	tristate "Hermes PCMCIA card support"
-	depends on PCMCIA && HERMES && HAS_IOPORT_MAP
-	help
-	  A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
-	  as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
-	  EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
-	  others).  It should also be usable on various Prism II based cards
-	  such as the Linksys, D-Link and Farallon Skyline.  It should also
-	  work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
-
-	  You will very likely need the Wireless Tools in order to
-	  configure your card and that /etc/pcmcia/wireless.opts works:
-	  <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
-config PCMCIA_SPECTRUM
-	tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
-	depends on PCMCIA && HERMES && HAS_IOPORT_MAP
-	help
-
-	  This is a driver for 802.11b cards using RAM-loadable Symbol
-	  firmware, such as Symbol Wireless Networker LA4100, CompactFlash
-	  cards by Socket Communications and Intel PRO/Wireless 2011B.
-
-	  This driver requires firmware download on startup.  Utilities
-	  for downloading Symbol firmware are available at
-	  <http://sourceforge.net/projects/orinoco/>
-
-config ORINOCO_USB
-	tristate "Agere Orinoco USB support"
-	depends on USB && HERMES
-	select FW_LOADER
-	help
-	  This driver is for USB versions of the Agere Orinoco card.
diff --git a/drivers/net/wireless/intersil/orinoco/Makefile b/drivers/net/wireless/intersil/orinoco/Makefile
deleted file mode 100644
index 0c29c56c88..0000000000
--- a/drivers/net/wireless/intersil/orinoco/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the orinoco wireless device drivers.
-#
-orinoco-objs := main.o fw.o hw.o mic.o scan.o wext.o hermes_dld.o hermes.o cfg.o
-
-obj-$(CONFIG_HERMES)		+= orinoco.o
-obj-$(CONFIG_PCMCIA_HERMES)	+= orinoco_cs.o
-obj-$(CONFIG_APPLE_AIRPORT)	+= airport.o
-obj-$(CONFIG_PLX_HERMES)	+= orinoco_plx.o
-obj-$(CONFIG_PCI_HERMES)	+= orinoco_pci.o
-obj-$(CONFIG_TMD_HERMES)	+= orinoco_tmd.o
-obj-$(CONFIG_NORTEL_HERMES)	+= orinoco_nortel.o
-obj-$(CONFIG_PCMCIA_SPECTRUM)	+= spectrum_cs.o
-obj-$(CONFIG_ORINOCO_USB)	+= orinoco_usb.o
diff --git a/drivers/net/wireless/intersil/orinoco/airport.c b/drivers/net/wireless/intersil/orinoco/airport.c
deleted file mode 100644
index 45ac00fdaf..0000000000
--- a/drivers/net/wireless/intersil/orinoco/airport.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/* airport.c
- *
- * A driver for "Hermes" chipset based Apple Airport wireless
- * card.
- *
- * Copyright notice & release notes in file main.c
- *
- * Note specific to airport stub:
- *
- *  0.05 : first version of the new split driver
- *  0.06 : fix possible hang on powerup, add sleep support
- */
-
-#define DRIVER_NAME "airport"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/mod_devicetable.h>
-#include <asm/pmac_feature.h>
-
-#include "orinoco.h"
-
-#define AIRPORT_IO_LEN	(0x1000)	/* one page */
-
-struct airport {
-	struct macio_dev *mdev;
-	void __iomem *vaddr;
-	unsigned int irq;
-	int irq_requested;
-	int ndev_registered;
-};
-
-static int
-airport_suspend(struct macio_dev *mdev, pm_message_t state)
-{
-	struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev);
-	struct net_device *dev = priv->ndev;
-	struct airport *card = priv->card;
-	unsigned long flags;
-	int err;
-
-	printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name);
-
-	err = orinoco_lock(priv, &flags);
-	if (err) {
-		printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n",
-		       dev->name);
-		return 0;
-	}
-
-	orinoco_down(priv);
-	orinoco_unlock(priv, &flags);
-
-	disable_irq(card->irq);
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
-			  macio_get_of_node(mdev), 0, 0);
-
-	return 0;
-}
-
-static int
-airport_resume(struct macio_dev *mdev)
-{
-	struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev);
-	struct net_device *dev = priv->ndev;
-	struct airport *card = priv->card;
-	unsigned long flags;
-	int err;
-
-	printk(KERN_DEBUG "%s: Airport waking up\n", dev->name);
-
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
-			  macio_get_of_node(mdev), 0, 1);
-	msleep(200);
-
-	enable_irq(card->irq);
-
-	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
-	err = orinoco_up(priv);
-	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-
-	return err;
-}
-
-static int
-airport_detach(struct macio_dev *mdev)
-{
-	struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev);
-	struct airport *card = priv->card;
-
-	if (card->ndev_registered)
-		orinoco_if_del(priv);
-	card->ndev_registered = 0;
-
-	if (card->irq_requested)
-		free_irq(card->irq, priv);
-	card->irq_requested = 0;
-
-	if (card->vaddr)
-		iounmap(card->vaddr);
-	card->vaddr = NULL;
-
-	macio_release_resource(mdev, 0);
-
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
-			  macio_get_of_node(mdev), 0, 0);
-	ssleep(1);
-
-	macio_set_drvdata(mdev, NULL);
-	free_orinocodev(priv);
-
-	return 0;
-}
-
-static int airport_hard_reset(struct orinoco_private *priv)
-{
-	/* It would be nice to power cycle the Airport for a real hard
-	 * reset, but for some reason although it appears to
-	 * re-initialize properly, it falls in a screaming heap
-	 * shortly afterwards. */
-#if 0
-	struct airport *card = priv->card;
-
-	/* Vitally important.  If we don't do this it seems we get an
-	 * interrupt somewhere during the power cycle, since
-	 * hw_unavailable is already set it doesn't get ACKed, we get
-	 * into an interrupt loop and the PMU decides to turn us
-	 * off. */
-	disable_irq(card->irq);
-
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
-			  macio_get_of_node(card->mdev), 0, 0);
-	ssleep(1);
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
-			  macio_get_of_node(card->mdev), 0, 1);
-	ssleep(1);
-
-	enable_irq(card->irq);
-	ssleep(1);
-#endif
-
-	return 0;
-}
-
-static int
-airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
-{
-	struct orinoco_private *priv;
-	struct airport *card;
-	unsigned long phys_addr;
-	struct hermes *hw;
-
-	if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) {
-		printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n");
-		return -ENODEV;
-	}
-
-	/* Allocate space for private device-specific data */
-	priv = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev,
-				airport_hard_reset, NULL);
-	if (!priv) {
-		printk(KERN_ERR PFX "Cannot allocate network device\n");
-		return -ENODEV;
-	}
-	card = priv->card;
-
-	hw = &priv->hw;
-	card->mdev = mdev;
-
-	if (macio_request_resource(mdev, 0, DRIVER_NAME)) {
-		printk(KERN_ERR PFX "can't request IO resource !\n");
-		free_orinocodev(priv);
-		return -EBUSY;
-	}
-
-	macio_set_drvdata(mdev, priv);
-
-	/* Setup interrupts & base address */
-	card->irq = macio_irq(mdev, 0);
-	phys_addr = macio_resource_start(mdev, 0);  /* Physical address */
-	printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr);
-	card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN);
-	if (!card->vaddr) {
-		printk(KERN_ERR PFX "ioremap() failed\n");
-		goto failed;
-	}
-
-	hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING);
-
-	/* Power up card */
-	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
-			  macio_get_of_node(mdev), 0, 1);
-	ssleep(1);
-
-	/* Reset it before we get the interrupt */
-	hw->ops->init(hw);
-
-	if (request_irq(card->irq, orinoco_interrupt, 0, DRIVER_NAME, priv)) {
-		printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq);
-		goto failed;
-	}
-	card->irq_requested = 1;
-
-	/* Initialise the main driver */
-	if (orinoco_init(priv) != 0) {
-		printk(KERN_ERR PFX "orinoco_init() failed\n");
-		goto failed;
-	}
-
-	/* Register an interface with the stack */
-	if (orinoco_if_add(priv, phys_addr, card->irq, NULL) != 0) {
-		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
-		goto failed;
-	}
-	card->ndev_registered = 1;
-	return 0;
- failed:
-	airport_detach(mdev);
-	return -ENODEV;
-}				/* airport_attach */
-
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("Driver for the Apple Airport wireless card.");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static const struct of_device_id airport_match[] = {
-	{
-	.name		= "radio",
-	},
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, airport_match);
-
-static struct macio_driver airport_driver = {
-	.driver = {
-		.name		= DRIVER_NAME,
-		.owner		= THIS_MODULE,
-		.of_match_table	= airport_match,
-	},
-	.probe		= airport_attach,
-	.remove		= airport_detach,
-	.suspend	= airport_suspend,
-	.resume		= airport_resume,
-};
-
-static int __init
-init_airport(void)
-{
-	printk(KERN_DEBUG "%s\n", version);
-
-	return macio_register_driver(&airport_driver);
-}
-
-static void __exit
-exit_airport(void)
-{
-	macio_unregister_driver(&airport_driver);
-}
-
-module_init(init_airport);
-module_exit(exit_airport);
diff --git a/drivers/net/wireless/intersil/orinoco/cfg.c b/drivers/net/wireless/intersil/orinoco/cfg.c
deleted file mode 100644
index b2d5ec8634..0000000000
--- a/drivers/net/wireless/intersil/orinoco/cfg.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/* cfg80211 support
- *
- * See copyright notice in main.c
- */
-#include <linux/ieee80211.h>
-#include <net/cfg80211.h>
-#include "hw.h"
-#include "main.h"
-#include "orinoco.h"
-
-#include "cfg.h"
-
-/* Supported bitrates. Must agree with hw.c */
-static struct ieee80211_rate orinoco_rates[] = {
-	{ .bitrate = 10 },
-	{ .bitrate = 20 },
-	{ .bitrate = 55 },
-	{ .bitrate = 110 },
-};
-
-static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid;
-
-/* Called after orinoco_private is allocated. */
-void orinoco_wiphy_init(struct wiphy *wiphy)
-{
-	struct orinoco_private *priv = wiphy_priv(wiphy);
-
-	wiphy->privid = orinoco_wiphy_privid;
-
-	set_wiphy_dev(wiphy, priv->dev);
-}
-
-/* Called after firmware is initialised */
-int orinoco_wiphy_register(struct wiphy *wiphy)
-{
-	struct orinoco_private *priv = wiphy_priv(wiphy);
-	int i, channels = 0;
-
-	if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
-		wiphy->max_scan_ssids = 1;
-	else
-		wiphy->max_scan_ssids = 0;
-
-	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
-
-	/* TODO: should we set if we only have demo ad-hoc?
-	 *       (priv->has_port3)
-	 */
-	if (priv->has_ibss)
-		wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
-
-	if (!priv->broken_monitor || force_monitor)
-		wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
-
-	priv->band.bitrates = orinoco_rates;
-	priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates);
-
-	/* Only support channels allowed by the card EEPROM */
-	for (i = 0; i < NUM_CHANNELS; i++) {
-		if (priv->channel_mask & (1 << i)) {
-			priv->channels[i].center_freq =
-				ieee80211_channel_to_frequency(i + 1,
-							   NL80211_BAND_2GHZ);
-			channels++;
-		}
-	}
-	priv->band.channels = priv->channels;
-	priv->band.n_channels = channels;
-
-	wiphy->bands[NL80211_BAND_2GHZ] = &priv->band;
-	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
-
-	i = 0;
-	if (priv->has_wep) {
-		priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40;
-		i++;
-
-		if (priv->has_big_wep) {
-			priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104;
-			i++;
-		}
-	}
-	if (priv->has_wpa) {
-		priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP;
-		i++;
-	}
-	wiphy->cipher_suites = priv->cipher_suites;
-	wiphy->n_cipher_suites = i;
-
-	wiphy->rts_threshold = priv->rts_thresh;
-	if (!priv->has_mwo)
-		wiphy->frag_threshold = priv->frag_thresh + 1;
-	wiphy->retry_short = priv->short_retry_limit;
-	wiphy->retry_long = priv->long_retry_limit;
-
-	return wiphy_register(wiphy);
-}
-
-static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev,
-			      enum nl80211_iftype type,
-			      struct vif_params *params)
-{
-	struct orinoco_private *priv = wiphy_priv(wiphy);
-	int err = 0;
-	unsigned long lock;
-
-	if (orinoco_lock(priv, &lock) != 0)
-		return -EBUSY;
-
-	switch (type) {
-	case NL80211_IFTYPE_ADHOC:
-		if (!priv->has_ibss && !priv->has_port3)
-			err = -EINVAL;
-		break;
-
-	case NL80211_IFTYPE_STATION:
-		break;
-
-	case NL80211_IFTYPE_MONITOR:
-		if (priv->broken_monitor && !force_monitor) {
-			wiphy_warn(wiphy,
-				   "Monitor mode support is buggy in this firmware, not enabling\n");
-			err = -EINVAL;
-		}
-		break;
-
-	default:
-		err = -EINVAL;
-	}
-
-	if (!err) {
-		priv->iw_mode = type;
-		set_port_type(priv);
-		err = orinoco_commit(priv);
-	}
-
-	orinoco_unlock(priv, &lock);
-
-	return err;
-}
-
-static int orinoco_scan(struct wiphy *wiphy,
-			struct cfg80211_scan_request *request)
-{
-	struct orinoco_private *priv = wiphy_priv(wiphy);
-	int err;
-
-	if (!request)
-		return -EINVAL;
-
-	if (priv->scan_request && priv->scan_request != request)
-		return -EBUSY;
-
-	priv->scan_request = request;
-
-	err = orinoco_hw_trigger_scan(priv, request->ssids);
-	/* On error the we aren't processing the request */
-	if (err)
-		priv->scan_request = NULL;
-
-	return err;
-}
-
-static int orinoco_set_monitor_channel(struct wiphy *wiphy,
-				       struct cfg80211_chan_def *chandef)
-{
-	struct orinoco_private *priv = wiphy_priv(wiphy);
-	int err = 0;
-	unsigned long flags;
-	int channel;
-
-	if (!chandef->chan)
-		return -EINVAL;
-
-	if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT)
-		return -EINVAL;
-
-	if (chandef->chan->band != NL80211_BAND_2GHZ)
-		return -EINVAL;
-
-	channel = ieee80211_frequency_to_channel(chandef->chan->center_freq);
-
-	if ((channel < 1) || (channel > NUM_CHANNELS) ||
-	     !(priv->channel_mask & (1 << (channel - 1))))
-		return -EINVAL;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	priv->channel = channel;
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
-		/* Fast channel change - no commit if successful */
-		struct hermes *hw = &priv->hw;
-		err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
-					    HERMES_TEST_SET_CHANNEL,
-					channel, NULL);
-	}
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed)
-{
-	struct orinoco_private *priv = wiphy_priv(wiphy);
-	int frag_value = -1;
-	int rts_value = -1;
-	int err = 0;
-
-	if (changed & WIPHY_PARAM_RETRY_SHORT) {
-		/* Setting short retry not supported */
-		err = -EINVAL;
-	}
-
-	if (changed & WIPHY_PARAM_RETRY_LONG) {
-		/* Setting long retry not supported */
-		err = -EINVAL;
-	}
-
-	if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
-		/* Set fragmentation */
-		if (priv->has_mwo) {
-			if (wiphy->frag_threshold == -1)
-				frag_value = 0;
-			else {
-				printk(KERN_WARNING "%s: Fixed fragmentation "
-				       "is not supported on this firmware. "
-				       "Using MWO robust instead.\n",
-				       priv->ndev->name);
-				frag_value = 1;
-			}
-		} else {
-			if (wiphy->frag_threshold == -1)
-				frag_value = 2346;
-			else if ((wiphy->frag_threshold < 257) ||
-				 (wiphy->frag_threshold > 2347))
-				err = -EINVAL;
-			else
-				/* cfg80211 value is 257-2347 (odd only)
-				 * orinoco rid has range 256-2346 (even only) */
-				frag_value = wiphy->frag_threshold & ~0x1;
-		}
-	}
-
-	if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
-		/* Set RTS.
-		 *
-		 * Prism documentation suggests default of 2432,
-		 * and a range of 0-3000.
-		 *
-		 * Current implementation uses 2347 as the default and
-		 * the upper limit.
-		 */
-
-		if (wiphy->rts_threshold == -1)
-			rts_value = 2347;
-		else if (wiphy->rts_threshold > 2347)
-			err = -EINVAL;
-		else
-			rts_value = wiphy->rts_threshold;
-	}
-
-	if (!err) {
-		unsigned long flags;
-
-		if (orinoco_lock(priv, &flags) != 0)
-			return -EBUSY;
-
-		if (frag_value >= 0) {
-			if (priv->has_mwo)
-				priv->mwo_robust = frag_value;
-			else
-				priv->frag_thresh = frag_value;
-		}
-		if (rts_value >= 0)
-			priv->rts_thresh = rts_value;
-
-		err = orinoco_commit(priv);
-
-		orinoco_unlock(priv, &flags);
-	}
-
-	return err;
-}
-
-const struct cfg80211_ops orinoco_cfg_ops = {
-	.change_virtual_intf = orinoco_change_vif,
-	.set_monitor_channel = orinoco_set_monitor_channel,
-	.scan = orinoco_scan,
-	.set_wiphy_params = orinoco_set_wiphy_params,
-};
diff --git a/drivers/net/wireless/intersil/orinoco/cfg.h b/drivers/net/wireless/intersil/orinoco/cfg.h
deleted file mode 100644
index 3ddc96a06c..0000000000
--- a/drivers/net/wireless/intersil/orinoco/cfg.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* cfg80211 support.
- *
- * See copyright notice in main.c
- */
-#ifndef ORINOCO_CFG_H
-#define ORINOCO_CFG_H
-
-#include <net/cfg80211.h>
-
-extern const struct cfg80211_ops orinoco_cfg_ops;
-
-void orinoco_wiphy_init(struct wiphy *wiphy);
-int orinoco_wiphy_register(struct wiphy *wiphy);
-
-#endif /* ORINOCO_CFG_H */
diff --git a/drivers/net/wireless/intersil/orinoco/fw.c b/drivers/net/wireless/intersil/orinoco/fw.c
deleted file mode 100644
index 015af78288..0000000000
--- a/drivers/net/wireless/intersil/orinoco/fw.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/* Firmware file reading and download helpers
- *
- * See copyright notice in main.c
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/firmware.h>
-#include <linux/device.h>
-#include <linux/module.h>
-
-#include "hermes.h"
-#include "hermes_dld.h"
-#include "orinoco.h"
-
-#include "fw.h"
-
-/* End markers (for Symbol firmware only) */
-#define TEXT_END	0x1A		/* End of text header */
-
-struct fw_info {
-	char *pri_fw;
-	char *sta_fw;
-	char *ap_fw;
-	u32 pda_addr;
-	u16 pda_size;
-};
-
-static const struct fw_info orinoco_fw[] = {
-	{ NULL, "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 },
-	{ NULL, "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 },
-	{ "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", NULL, 0x00003100, 512 }
-};
-MODULE_FIRMWARE("agere_sta_fw.bin");
-MODULE_FIRMWARE("agere_ap_fw.bin");
-MODULE_FIRMWARE("prism_sta_fw.bin");
-MODULE_FIRMWARE("prism_ap_fw.bin");
-MODULE_FIRMWARE("symbol_sp24t_prim_fw");
-MODULE_FIRMWARE("symbol_sp24t_sec_fw");
-
-/* Structure used to access fields in FW
- * Make sure LE decoding macros are used
- */
-struct orinoco_fw_header {
-	char hdr_vers[6];       /* ASCII string for header version */
-	__le16 headersize;      /* Total length of header */
-	__le32 entry_point;     /* NIC entry point */
-	__le32 blocks;          /* Number of blocks to program */
-	__le32 block_offset;    /* Offset of block data from eof header */
-	__le32 pdr_offset;      /* Offset to PDR data from eof header */
-	__le32 pri_offset;      /* Offset to primary plug data */
-	__le32 compat_offset;   /* Offset to compatibility data*/
-	char signature[];      /* FW signature length headersize-20 */
-} __packed;
-
-/* Check the range of various header entries. Return a pointer to a
- * description of the problem, or NULL if everything checks out. */
-static const char *validate_fw(const struct orinoco_fw_header *hdr, size_t len)
-{
-	u16 hdrsize;
-
-	if (len < sizeof(*hdr))
-		return "image too small";
-	if (memcmp(hdr->hdr_vers, "HFW", 3) != 0)
-		return "format not recognised";
-
-	hdrsize = le16_to_cpu(hdr->headersize);
-	if (hdrsize > len)
-		return "bad headersize";
-	if ((hdrsize + le32_to_cpu(hdr->block_offset)) > len)
-		return "bad block offset";
-	if ((hdrsize + le32_to_cpu(hdr->pdr_offset)) > len)
-		return "bad PDR offset";
-	if ((hdrsize + le32_to_cpu(hdr->pri_offset)) > len)
-		return "bad PRI offset";
-	if ((hdrsize + le32_to_cpu(hdr->compat_offset)) > len)
-		return "bad compat offset";
-
-	/* TODO: consider adding a checksum or CRC to the firmware format */
-	return NULL;
-}
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
-static inline const struct firmware *
-orinoco_cached_fw_get(struct orinoco_private *priv, bool primary)
-{
-	if (primary)
-		return priv->cached_pri_fw;
-	else
-		return priv->cached_fw;
-}
-#else
-#define orinoco_cached_fw_get(priv, primary) (NULL)
-#endif
-
-/* Download either STA or AP firmware into the card. */
-static int
-orinoco_dl_firmware(struct orinoco_private *priv,
-		    const struct fw_info *fw,
-		    int ap)
-{
-	/* Plug Data Area (PDA) */
-	__le16 *pda;
-
-	struct hermes *hw = &priv->hw;
-	const struct firmware *fw_entry;
-	const struct orinoco_fw_header *hdr;
-	const unsigned char *first_block;
-	const void *end;
-	const char *firmware;
-	const char *fw_err;
-	struct device *dev = priv->dev;
-	int err = 0;
-
-	pda = kzalloc(fw->pda_size, GFP_KERNEL);
-	if (!pda)
-		return -ENOMEM;
-
-	if (ap)
-		firmware = fw->ap_fw;
-	else
-		firmware = fw->sta_fw;
-
-	dev_dbg(dev, "Attempting to download firmware %s\n", firmware);
-
-	/* Read current plug data */
-	err = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
-	dev_dbg(dev, "Read PDA returned %d\n", err);
-	if (err)
-		goto free;
-
-	if (!orinoco_cached_fw_get(priv, false)) {
-		err = request_firmware(&fw_entry, firmware, priv->dev);
-
-		if (err) {
-			dev_err(dev, "Cannot find firmware %s\n", firmware);
-			err = -ENOENT;
-			goto free;
-		}
-	} else
-		fw_entry = orinoco_cached_fw_get(priv, false);
-
-	hdr = (const struct orinoco_fw_header *) fw_entry->data;
-
-	fw_err = validate_fw(hdr, fw_entry->size);
-	if (fw_err) {
-		dev_warn(dev, "Invalid firmware image detected (%s). "
-			 "Aborting download\n", fw_err);
-		err = -EINVAL;
-		goto abort;
-	}
-
-	/* Enable aux port to allow programming */
-	err = hw->ops->program_init(hw, le32_to_cpu(hdr->entry_point));
-	dev_dbg(dev, "Program init returned %d\n", err);
-	if (err != 0)
-		goto abort;
-
-	/* Program data */
-	first_block = (fw_entry->data +
-		       le16_to_cpu(hdr->headersize) +
-		       le32_to_cpu(hdr->block_offset));
-	end = fw_entry->data + fw_entry->size;
-
-	err = hermes_program(hw, first_block, end);
-	dev_dbg(dev, "Program returned %d\n", err);
-	if (err != 0)
-		goto abort;
-
-	/* Update production data */
-	first_block = (fw_entry->data +
-		       le16_to_cpu(hdr->headersize) +
-		       le32_to_cpu(hdr->pdr_offset));
-
-	err = hermes_apply_pda_with_defaults(hw, first_block, end, pda,
-					     &pda[fw->pda_size / sizeof(*pda)]);
-	dev_dbg(dev, "Apply PDA returned %d\n", err);
-	if (err)
-		goto abort;
-
-	/* Tell card we've finished */
-	err = hw->ops->program_end(hw);
-	dev_dbg(dev, "Program end returned %d\n", err);
-	if (err != 0)
-		goto abort;
-
-	/* Check if we're running */
-	dev_dbg(dev, "hermes_present returned %d\n", hermes_present(hw));
-
-abort:
-	/* If we requested the firmware, release it. */
-	if (!orinoco_cached_fw_get(priv, false))
-		release_firmware(fw_entry);
-
-free:
-	kfree(pda);
-	return err;
-}
-
-/*
- * Process a firmware image - stop the card, load the firmware, reset
- * the card and make sure it responds.  For the secondary firmware take
- * care of the PDA - read it and then write it on top of the firmware.
- */
-static int
-symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
-		const unsigned char *image, const void *end,
-		int secondary)
-{
-	struct hermes *hw = &priv->hw;
-	int ret = 0;
-	const unsigned char *ptr;
-	const unsigned char *first_block;
-
-	/* Plug Data Area (PDA) */
-	__le16 *pda = NULL;
-
-	/* Binary block begins after the 0x1A marker */
-	ptr = image;
-	while (*ptr++ != TEXT_END);
-	first_block = ptr;
-
-	/* Read the PDA from EEPROM */
-	if (secondary) {
-		pda = kzalloc(fw->pda_size, GFP_KERNEL);
-		if (!pda)
-			return -ENOMEM;
-
-		ret = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
-		if (ret)
-			goto free;
-	}
-
-	/* Stop the firmware, so that it can be safely rewritten */
-	if (priv->stop_fw) {
-		ret = priv->stop_fw(priv, 1);
-		if (ret)
-			goto free;
-	}
-
-	/* Program the adapter with new firmware */
-	ret = hermes_program(hw, first_block, end);
-	if (ret)
-		goto free;
-
-	/* Write the PDA to the adapter */
-	if (secondary) {
-		size_t len = hermes_blocks_length(first_block, end);
-		ptr = first_block + len;
-		ret = hermes_apply_pda(hw, ptr, end, pda,
-				       &pda[fw->pda_size / sizeof(*pda)]);
-		kfree(pda);
-		if (ret)
-			return ret;
-	}
-
-	/* Run the firmware */
-	if (priv->stop_fw) {
-		ret = priv->stop_fw(priv, 0);
-		if (ret)
-			return ret;
-	}
-
-	/* Reset hermes chip and make sure it responds */
-	ret = hw->ops->init(hw);
-
-	/* hermes_reset() should return 0 with the secondary firmware */
-	if (secondary && ret != 0)
-		return -ENODEV;
-
-	/* And this should work with any firmware */
-	if (!hermes_present(hw))
-		return -ENODEV;
-
-	return 0;
-
-free:
-	kfree(pda);
-	return ret;
-}
-
-
-/*
- * Download the firmware into the card, this also does a PCMCIA soft
- * reset on the card, to make sure it's in a sane state.
- */
-static int
-symbol_dl_firmware(struct orinoco_private *priv,
-		   const struct fw_info *fw)
-{
-	struct device *dev = priv->dev;
-	int ret;
-	const struct firmware *fw_entry;
-
-	if (!orinoco_cached_fw_get(priv, true)) {
-		if (request_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) {
-			dev_err(dev, "Cannot find firmware: %s\n", fw->pri_fw);
-			return -ENOENT;
-		}
-	} else
-		fw_entry = orinoco_cached_fw_get(priv, true);
-
-	/* Load primary firmware */
-	ret = symbol_dl_image(priv, fw, fw_entry->data,
-			      fw_entry->data + fw_entry->size, 0);
-
-	if (!orinoco_cached_fw_get(priv, true))
-		release_firmware(fw_entry);
-	if (ret) {
-		dev_err(dev, "Primary firmware download failed\n");
-		return ret;
-	}
-
-	if (!orinoco_cached_fw_get(priv, false)) {
-		if (request_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) {
-			dev_err(dev, "Cannot find firmware: %s\n", fw->sta_fw);
-			return -ENOENT;
-		}
-	} else
-		fw_entry = orinoco_cached_fw_get(priv, false);
-
-	/* Load secondary firmware */
-	ret = symbol_dl_image(priv, fw, fw_entry->data,
-			      fw_entry->data + fw_entry->size, 1);
-	if (!orinoco_cached_fw_get(priv, false))
-		release_firmware(fw_entry);
-	if (ret)
-		dev_err(dev, "Secondary firmware download failed\n");
-
-	return ret;
-}
-
-int orinoco_download(struct orinoco_private *priv)
-{
-	int err = 0;
-	/* Reload firmware */
-	switch (priv->firmware_type) {
-	case FIRMWARE_TYPE_AGERE:
-		/* case FIRMWARE_TYPE_INTERSIL: */
-		err = orinoco_dl_firmware(priv,
-					  &orinoco_fw[priv->firmware_type], 0);
-		break;
-
-	case FIRMWARE_TYPE_SYMBOL:
-		err = symbol_dl_firmware(priv,
-					 &orinoco_fw[priv->firmware_type]);
-		break;
-	case FIRMWARE_TYPE_INTERSIL:
-		break;
-	}
-	/* TODO: if we fail we probably need to reinitialise
-	 * the driver */
-
-	return err;
-}
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
-void orinoco_cache_fw(struct orinoco_private *priv, int ap)
-{
-	const struct firmware *fw_entry = NULL;
-	const char *pri_fw;
-	const char *fw;
-
-	pri_fw = orinoco_fw[priv->firmware_type].pri_fw;
-	if (ap)
-		fw = orinoco_fw[priv->firmware_type].ap_fw;
-	else
-		fw = orinoco_fw[priv->firmware_type].sta_fw;
-
-	if (pri_fw) {
-		if (request_firmware(&fw_entry, pri_fw, priv->dev) == 0)
-			priv->cached_pri_fw = fw_entry;
-	}
-
-	if (fw) {
-		if (request_firmware(&fw_entry, fw, priv->dev) == 0)
-			priv->cached_fw = fw_entry;
-	}
-}
-
-void orinoco_uncache_fw(struct orinoco_private *priv)
-{
-	release_firmware(priv->cached_pri_fw);
-	release_firmware(priv->cached_fw);
-	priv->cached_pri_fw = NULL;
-	priv->cached_fw = NULL;
-}
-#endif
diff --git a/drivers/net/wireless/intersil/orinoco/fw.h b/drivers/net/wireless/intersil/orinoco/fw.h
deleted file mode 100644
index aca63e3c4b..0000000000
--- a/drivers/net/wireless/intersil/orinoco/fw.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Firmware file reading and download helpers
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_FW_H_
-#define _ORINOCO_FW_H_
-
-/* Forward declations */
-struct orinoco_private;
-
-int orinoco_download(struct orinoco_private *priv);
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
-void orinoco_cache_fw(struct orinoco_private *priv, int ap);
-void orinoco_uncache_fw(struct orinoco_private *priv);
-#else
-#define orinoco_cache_fw(priv, ap) do { } while (0)
-#define orinoco_uncache_fw(priv) do { } while (0)
-#endif
-
-#endif /* _ORINOCO_FW_H_ */
diff --git a/drivers/net/wireless/intersil/orinoco/hermes.c b/drivers/net/wireless/intersil/orinoco/hermes.c
deleted file mode 100644
index 4888286727..0000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes.c
+++ /dev/null
@@ -1,778 +0,0 @@
-/* hermes.c
- *
- * Driver core for the "Hermes" wireless MAC controller, as used in
- * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
- * work on the hfa3841 and hfa3842 MAC controller chips used in the
- * Prism II chipsets.
- *
- * This is not a complete driver, just low-level access routines for
- * the MAC controller itself.
- *
- * Based on the prism2 driver from Absolute Value Systems' linux-wlan
- * project, the Linux wvlan_cs driver, Lucent's HCF-Light
- * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no
- * particular order).
- *
- * Copyright (C) 2000, David Gibson, Linuxcare Australia.
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#include <linux/net.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-
-#include "hermes.h"
-
-/* These are maximum timeouts. Most often, card wil react much faster */
-#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */
-#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */
-#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */
-#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
-
-/*
- * AUX port access.  To unlock the AUX port write the access keys to the
- * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
- * register.  Then read it and make sure it's HERMES_AUX_ENABLED.
- */
-#define HERMES_AUX_ENABLE	0x8000	/* Enable auxiliary port access */
-#define HERMES_AUX_DISABLE	0x4000	/* Disable to auxiliary port access */
-#define HERMES_AUX_ENABLED	0xC000	/* Auxiliary port is open */
-#define HERMES_AUX_DISABLED	0x0000	/* Auxiliary port is closed */
-
-#define HERMES_AUX_PW0	0xFE01
-#define HERMES_AUX_PW1	0xDC23
-#define HERMES_AUX_PW2	0xBA45
-
-/* HERMES_CMD_DOWNLD */
-#define HERMES_PROGRAM_DISABLE             (0x0000 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_VOLATILE     (0x0100 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_NON_VOLATILE        (0x0300 | HERMES_CMD_DOWNLD)
-
-/*
- * Debugging helpers
- */
-
-#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
-			printk(stuff); } while (0)
-
-#undef HERMES_DEBUG
-#ifdef HERMES_DEBUG
-
-#define DEBUG(lvl, stuff...) if ((lvl) <= HERMES_DEBUG) DMSG(stuff)
-
-#else /* ! HERMES_DEBUG */
-
-#define DEBUG(lvl, stuff...) do { } while (0)
-
-#endif /* ! HERMES_DEBUG */
-
-static const struct hermes_ops hermes_ops_local;
-
-/*
- * Internal functions
- */
-
-/* Issue a command to the chip. Waiting for it to complete is the caller's
-   problem.
-
-   Returns -EBUSY if the command register is busy, 0 on success.
-
-   Callable from any context.
-*/
-static int hermes_issue_cmd(struct hermes *hw, u16 cmd, u16 param0,
-			    u16 param1, u16 param2)
-{
-	int k = CMD_BUSY_TIMEOUT;
-	u16 reg;
-
-	/* First wait for the command register to unbusy */
-	reg = hermes_read_regn(hw, CMD);
-	while ((reg & HERMES_CMD_BUSY) && k) {
-		k--;
-		udelay(1);
-		reg = hermes_read_regn(hw, CMD);
-	}
-	if (reg & HERMES_CMD_BUSY)
-		return -EBUSY;
-
-	hermes_write_regn(hw, PARAM2, param2);
-	hermes_write_regn(hw, PARAM1, param1);
-	hermes_write_regn(hw, PARAM0, param0);
-	hermes_write_regn(hw, CMD, cmd);
-
-	return 0;
-}
-
-/*
- * Function definitions
- */
-
-/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
-static int hermes_doicmd_wait(struct hermes *hw, u16 cmd,
-			      u16 parm0, u16 parm1, u16 parm2,
-			      struct hermes_response *resp)
-{
-	int err = 0;
-	int k;
-	u16 status, reg;
-
-	err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2);
-	if (err)
-		return err;
-
-	reg = hermes_read_regn(hw, EVSTAT);
-	k = CMD_INIT_TIMEOUT;
-	while ((!(reg & HERMES_EV_CMD)) && k) {
-		k--;
-		udelay(10);
-		reg = hermes_read_regn(hw, EVSTAT);
-	}
-
-	hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
-
-	if (!hermes_present(hw)) {
-		DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
-		       hw->iobase);
-		err = -ENODEV;
-		goto out;
-	}
-
-	if (!(reg & HERMES_EV_CMD)) {
-		printk(KERN_ERR "hermes @ %p: "
-		       "Timeout waiting for card to reset (reg=0x%04x)!\n",
-		       hw->iobase, reg);
-		err = -ETIMEDOUT;
-		goto out;
-	}
-
-	status = hermes_read_regn(hw, STATUS);
-	if (resp) {
-		resp->status = status;
-		resp->resp0 = hermes_read_regn(hw, RESP0);
-		resp->resp1 = hermes_read_regn(hw, RESP1);
-		resp->resp2 = hermes_read_regn(hw, RESP2);
-	}
-
-	hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
-
-	if (status & HERMES_STATUS_RESULT)
-		err = -EIO;
-out:
-	return err;
-}
-
-void hermes_struct_init(struct hermes *hw, void __iomem *address,
-			int reg_spacing)
-{
-	hw->iobase = address;
-	hw->reg_spacing = reg_spacing;
-	hw->inten = 0x0;
-	hw->eeprom_pda = false;
-	hw->ops = &hermes_ops_local;
-}
-EXPORT_SYMBOL(hermes_struct_init);
-
-static int hermes_init(struct hermes *hw)
-{
-	u16 reg;
-	int err = 0;
-	int k;
-
-	/* We don't want to be interrupted while resetting the chipset */
-	hw->inten = 0x0;
-	hermes_write_regn(hw, INTEN, 0);
-	hermes_write_regn(hw, EVACK, 0xffff);
-
-	/* Normally it's a "can't happen" for the command register to
-	   be busy when we go to issue a command because we are
-	   serializing all commands.  However we want to have some
-	   chance of resetting the card even if it gets into a stupid
-	   state, so we actually wait to see if the command register
-	   will unbusy itself here. */
-	k = CMD_BUSY_TIMEOUT;
-	reg = hermes_read_regn(hw, CMD);
-	while (k && (reg & HERMES_CMD_BUSY)) {
-		if (reg == 0xffff) /* Special case - the card has probably been
-				      removed, so don't wait for the timeout */
-			return -ENODEV;
-
-		k--;
-		udelay(1);
-		reg = hermes_read_regn(hw, CMD);
-	}
-
-	/* No need to explicitly handle the timeout - if we've timed
-	   out hermes_issue_cmd() will probably return -EBUSY below */
-
-	/* According to the documentation, EVSTAT may contain
-	   obsolete event occurrence information.  We have to acknowledge
-	   it by writing EVACK. */
-	reg = hermes_read_regn(hw, EVSTAT);
-	hermes_write_regn(hw, EVACK, reg);
-
-	/* We don't use hermes_docmd_wait here, because the reset wipes
-	   the magic constant in SWSUPPORT0 away, and it gets confused */
-	err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL);
-
-	return err;
-}
-
-/* Issue a command to the chip, and (busy!) wait for it to
- * complete.
- *
- * Returns:
- *     < 0 on internal error
- *       0 on success
- *     > 0 on error returned by the firmware
- *
- * Callable from any context, but locking is your problem. */
-static int hermes_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0,
-			     struct hermes_response *resp)
-{
-	int err;
-	int k;
-	u16 reg;
-	u16 status;
-
-	err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
-	if (err) {
-		if (!hermes_present(hw)) {
-			if (net_ratelimit())
-				printk(KERN_WARNING "hermes @ %p: "
-				       "Card removed while issuing command "
-				       "0x%04x.\n", hw->iobase, cmd);
-			err = -ENODEV;
-		} else
-			if (net_ratelimit())
-				printk(KERN_ERR "hermes @ %p: "
-				       "Error %d issuing command 0x%04x.\n",
-				       hw->iobase, err, cmd);
-		goto out;
-	}
-
-	reg = hermes_read_regn(hw, EVSTAT);
-	k = CMD_COMPL_TIMEOUT;
-	while ((!(reg & HERMES_EV_CMD)) && k) {
-		k--;
-		udelay(10);
-		reg = hermes_read_regn(hw, EVSTAT);
-	}
-
-	if (!hermes_present(hw)) {
-		printk(KERN_WARNING "hermes @ %p: Card removed "
-		       "while waiting for command 0x%04x completion.\n",
-		       hw->iobase, cmd);
-		err = -ENODEV;
-		goto out;
-	}
-
-	if (!(reg & HERMES_EV_CMD)) {
-		printk(KERN_ERR "hermes @ %p: Timeout waiting for "
-		       "command 0x%04x completion.\n", hw->iobase, cmd);
-		err = -ETIMEDOUT;
-		goto out;
-	}
-
-	status = hermes_read_regn(hw, STATUS);
-	if (resp) {
-		resp->status = status;
-		resp->resp0 = hermes_read_regn(hw, RESP0);
-		resp->resp1 = hermes_read_regn(hw, RESP1);
-		resp->resp2 = hermes_read_regn(hw, RESP2);
-	}
-
-	hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
-
-	if (status & HERMES_STATUS_RESULT)
-		err = -EIO;
-
- out:
-	return err;
-}
-
-static int hermes_allocate(struct hermes *hw, u16 size, u16 *fid)
-{
-	int err = 0;
-	int k;
-	u16 reg;
-
-	if ((size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX))
-		return -EINVAL;
-
-	err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
-	if (err)
-		return err;
-
-	reg = hermes_read_regn(hw, EVSTAT);
-	k = ALLOC_COMPL_TIMEOUT;
-	while ((!(reg & HERMES_EV_ALLOC)) && k) {
-		k--;
-		udelay(10);
-		reg = hermes_read_regn(hw, EVSTAT);
-	}
-
-	if (!hermes_present(hw)) {
-		printk(KERN_WARNING "hermes @ %p: "
-		       "Card removed waiting for frame allocation.\n",
-		       hw->iobase);
-		return -ENODEV;
-	}
-
-	if (!(reg & HERMES_EV_ALLOC)) {
-		printk(KERN_ERR "hermes @ %p: "
-		       "Timeout waiting for frame allocation\n",
-		       hw->iobase);
-		return -ETIMEDOUT;
-	}
-
-	*fid = hermes_read_regn(hw, ALLOCFID);
-	hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
-
-	return 0;
-}
-
-/* Set up a BAP to read a particular chunk of data from card's internal buffer.
- *
- * Returns:
- *     < 0 on internal failure (errno)
- *       0 on success
- *     > 0 on error
- * from firmware
- *
- * Callable from any context */
-static int hermes_bap_seek(struct hermes *hw, int bap, u16 id, u16 offset)
-{
-	int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0;
-	int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0;
-	int k;
-	u16 reg;
-
-	/* Paranoia.. */
-	if ((offset > HERMES_BAP_OFFSET_MAX) || (offset % 2))
-		return -EINVAL;
-
-	k = HERMES_BAP_BUSY_TIMEOUT;
-	reg = hermes_read_reg(hw, oreg);
-	while ((reg & HERMES_OFFSET_BUSY) && k) {
-		k--;
-		udelay(1);
-		reg = hermes_read_reg(hw, oreg);
-	}
-
-	if (reg & HERMES_OFFSET_BUSY)
-		return -ETIMEDOUT;
-
-	/* Now we actually set up the transfer */
-	hermes_write_reg(hw, sreg, id);
-	hermes_write_reg(hw, oreg, offset);
-
-	/* Wait for the BAP to be ready */
-	k = HERMES_BAP_BUSY_TIMEOUT;
-	reg = hermes_read_reg(hw, oreg);
-	while ((reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
-		k--;
-		udelay(1);
-		reg = hermes_read_reg(hw, oreg);
-	}
-
-	if (reg != offset) {
-		printk(KERN_ERR "hermes @ %p: BAP%d offset %s: "
-		       "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap,
-		       (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
-		       reg, id, offset);
-
-		if (reg & HERMES_OFFSET_BUSY)
-			return -ETIMEDOUT;
-
-		return -EIO;		/* error or wrong offset */
-	}
-
-	return 0;
-}
-
-/* Read a block of data from the chip's buffer, via the
- * BAP. Synchronization/serialization is the caller's problem.  len
- * must be even.
- *
- * Returns:
- *     < 0 on internal failure (errno)
- *       0 on success
- *     > 0 on error from firmware
- */
-static int hermes_bap_pread(struct hermes *hw, int bap, void *buf, int len,
-			    u16 id, u16 offset)
-{
-	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
-	int err = 0;
-
-	if ((len < 0) || (len % 2))
-		return -EINVAL;
-
-	err = hermes_bap_seek(hw, bap, id, offset);
-	if (err)
-		goto out;
-
-	/* Actually do the transfer */
-	hermes_read_words(hw, dreg, buf, len / 2);
-
- out:
-	return err;
-}
-
-/* Write a block of data to the chip's buffer, via the
- * BAP. Synchronization/serialization is the caller's problem.
- *
- * Returns:
- *     < 0 on internal failure (errno)
- *       0 on success
- *     > 0 on error from firmware
- */
-static int hermes_bap_pwrite(struct hermes *hw, int bap, const void *buf,
-			     int len, u16 id, u16 offset)
-{
-	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
-	int err = 0;
-
-	if (len < 0)
-		return -EINVAL;
-
-	err = hermes_bap_seek(hw, bap, id, offset);
-	if (err)
-		goto out;
-
-	/* Actually do the transfer */
-	hermes_write_bytes(hw, dreg, buf, len);
-
- out:
-	return err;
-}
-
-/* Read a Length-Type-Value record from the card.
- *
- * If length is NULL, we ignore the length read from the card, and
- * read the entire buffer regardless. This is useful because some of
- * the configuration records appear to have incorrect lengths in
- * practice.
- *
- * Callable from user or bh context.  */
-static int hermes_read_ltv(struct hermes *hw, int bap, u16 rid,
-			   unsigned bufsize, u16 *length, void *buf)
-{
-	int err = 0;
-	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
-	u16 rlength, rtype;
-	unsigned nwords;
-
-	if (bufsize % 2)
-		return -EINVAL;
-
-	err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
-	if (err)
-		return err;
-
-	err = hermes_bap_seek(hw, bap, rid, 0);
-	if (err)
-		return err;
-
-	rlength = hermes_read_reg(hw, dreg);
-
-	if (!rlength)
-		return -ENODATA;
-
-	rtype = hermes_read_reg(hw, dreg);
-
-	if (length)
-		*length = rlength;
-
-	if (rtype != rid)
-		printk(KERN_WARNING "hermes @ %p: %s(): "
-		       "rid (0x%04x) does not match type (0x%04x)\n",
-		       hw->iobase, __func__, rid, rtype);
-	if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize)
-		printk(KERN_WARNING "hermes @ %p: "
-		       "Truncating LTV record from %d to %d bytes. "
-		       "(rid=0x%04x, len=0x%04x)\n", hw->iobase,
-		       HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength);
-
-	nwords = min((unsigned)rlength - 1, bufsize / 2);
-	hermes_read_words(hw, dreg, buf, nwords);
-
-	return 0;
-}
-
-static int hermes_write_ltv(struct hermes *hw, int bap, u16 rid,
-			    u16 length, const void *value)
-{
-	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
-	int err = 0;
-	unsigned count;
-
-	if (length == 0)
-		return -EINVAL;
-
-	err = hermes_bap_seek(hw, bap, rid, 0);
-	if (err)
-		return err;
-
-	hermes_write_reg(hw, dreg, length);
-	hermes_write_reg(hw, dreg, rid);
-
-	count = length - 1;
-
-	hermes_write_bytes(hw, dreg, value, count << 1);
-
-	err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
-				rid, NULL);
-
-	return err;
-}
-
-/*** Hermes AUX control ***/
-
-static inline void
-hermes_aux_setaddr(struct hermes *hw, u32 addr)
-{
-	hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
-	hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
-}
-
-static inline int
-hermes_aux_control(struct hermes *hw, int enabled)
-{
-	int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
-	int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
-	int i;
-
-	/* Already open? */
-	if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
-		return 0;
-
-	hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
-	hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
-	hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
-	hermes_write_reg(hw, HERMES_CONTROL, action);
-
-	for (i = 0; i < 20; i++) {
-		udelay(10);
-		if (hermes_read_reg(hw, HERMES_CONTROL) ==
-		    desired_state)
-			return 0;
-	}
-
-	return -EBUSY;
-}
-
-/*** Hermes programming ***/
-
-/* About to start programming data (Hermes I)
- * offset is the entry point
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-static int hermesi_program_init(struct hermes *hw, u32 offset)
-{
-	int err;
-
-	/* Disable interrupts?*/
-	/*hw->inten = 0x0;*/
-	/*hermes_write_regn(hw, INTEN, 0);*/
-	/*hermes_set_irqmask(hw, 0);*/
-
-	/* Acknowledge any outstanding command */
-	hermes_write_regn(hw, EVACK, 0xFFFF);
-
-	/* Using init_cmd_wait rather than cmd_wait */
-	err = hw->ops->init_cmd_wait(hw,
-				     0x0100 | HERMES_CMD_INIT,
-				     0, 0, 0, NULL);
-	if (err)
-		return err;
-
-	err = hw->ops->init_cmd_wait(hw,
-				     0x0000 | HERMES_CMD_INIT,
-				     0, 0, 0, NULL);
-	if (err)
-		return err;
-
-	err = hermes_aux_control(hw, 1);
-	pr_debug("AUX enable returned %d\n", err);
-
-	if (err)
-		return err;
-
-	pr_debug("Enabling volatile, EP 0x%08x\n", offset);
-	err = hw->ops->init_cmd_wait(hw,
-				     HERMES_PROGRAM_ENABLE_VOLATILE,
-				     offset & 0xFFFFu,
-				     offset >> 16,
-				     0,
-				     NULL);
-	pr_debug("PROGRAM_ENABLE returned %d\n", err);
-
-	return err;
-}
-
-/* Done programming data (Hermes I)
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-static int hermesi_program_end(struct hermes *hw)
-{
-	struct hermes_response resp;
-	int rc = 0;
-	int err;
-
-	rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
-
-	pr_debug("PROGRAM_DISABLE returned %d, "
-		 "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
-		 rc, resp.resp0, resp.resp1, resp.resp2);
-
-	if ((rc == 0) &&
-	    ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
-		rc = -EIO;
-
-	err = hermes_aux_control(hw, 0);
-	pr_debug("AUX disable returned %d\n", err);
-
-	/* Acknowledge any outstanding command */
-	hermes_write_regn(hw, EVACK, 0xFFFF);
-
-	/* Reinitialise, ignoring return */
-	(void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
-				      0, 0, 0, NULL);
-
-	return rc ? rc : err;
-}
-
-static int hermes_program_bytes(struct hermes *hw, const char *data,
-				u32 addr, u32 len)
-{
-	/* wl lkm splits the programming into chunks of 2000 bytes.
-	 * This restriction appears to come from USB. The PCMCIA
-	 * adapters can program the whole lot in one go */
-	hermes_aux_setaddr(hw, addr);
-	hermes_write_bytes(hw, HERMES_AUXDATA, data, len);
-	return 0;
-}
-
-/* Read PDA from the adapter */
-static int hermes_read_pda(struct hermes *hw, __le16 *pda, u32 pda_addr,
-			   u16 pda_len)
-{
-	int ret;
-	u16 pda_size;
-	u16 data_len = pda_len;
-	__le16 *data = pda;
-
-	if (hw->eeprom_pda) {
-		/* PDA of spectrum symbol is in eeprom */
-
-		/* Issue command to read EEPROM */
-		ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
-		if (ret)
-			return ret;
-	} else {
-		/* wl_lkm does not include PDA size in the PDA area.
-		 * We will pad the information into pda, so other routines
-		 * don't have to be modified */
-		pda[0] = cpu_to_le16(pda_len - 2);
-			/* Includes CFG_PROD_DATA but not itself */
-		pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
-		data_len = pda_len - 4;
-		data = pda + 2;
-	}
-
-	/* Open auxiliary port */
-	ret = hermes_aux_control(hw, 1);
-	pr_debug("AUX enable returned %d\n", ret);
-	if (ret)
-		return ret;
-
-	/* Read PDA */
-	hermes_aux_setaddr(hw, pda_addr);
-	hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
-
-	/* Close aux port */
-	ret = hermes_aux_control(hw, 0);
-	pr_debug("AUX disable returned %d\n", ret);
-
-	/* Check PDA length */
-	pda_size = le16_to_cpu(pda[0]);
-	pr_debug("Actual PDA length %d, Max allowed %d\n",
-		 pda_size, pda_len);
-	if (pda_size > pda_len)
-		return -EINVAL;
-
-	return 0;
-}
-
-static void hermes_lock_irqsave(spinlock_t *lock,
-				unsigned long *flags) __acquires(lock)
-{
-	spin_lock_irqsave(lock, *flags);
-}
-
-static void hermes_unlock_irqrestore(spinlock_t *lock,
-				     unsigned long *flags) __releases(lock)
-{
-	spin_unlock_irqrestore(lock, *flags);
-}
-
-static void hermes_lock_irq(spinlock_t *lock) __acquires(lock)
-{
-	spin_lock_irq(lock);
-}
-
-static void hermes_unlock_irq(spinlock_t *lock) __releases(lock)
-{
-	spin_unlock_irq(lock);
-}
-
-/* Hermes operations for local buses */
-static const struct hermes_ops hermes_ops_local = {
-	.init = hermes_init,
-	.cmd_wait = hermes_docmd_wait,
-	.init_cmd_wait = hermes_doicmd_wait,
-	.allocate = hermes_allocate,
-	.read_ltv = hermes_read_ltv,
-	.read_ltv_pr = hermes_read_ltv,
-	.write_ltv = hermes_write_ltv,
-	.bap_pread = hermes_bap_pread,
-	.bap_pwrite = hermes_bap_pwrite,
-	.read_pda = hermes_read_pda,
-	.program_init = hermesi_program_init,
-	.program_end = hermesi_program_end,
-	.program = hermes_program_bytes,
-	.lock_irqsave = hermes_lock_irqsave,
-	.unlock_irqrestore = hermes_unlock_irqrestore,
-	.lock_irq = hermes_lock_irq,
-	.unlock_irq = hermes_unlock_irq,
-};
diff --git a/drivers/net/wireless/intersil/orinoco/hermes.h b/drivers/net/wireless/intersil/orinoco/hermes.h
deleted file mode 100644
index 3dc561a5cb..0000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes.h
+++ /dev/null
@@ -1,534 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* hermes.h
- *
- * Driver core for the "Hermes" wireless MAC controller, as used in
- * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
- * work on the hfa3841 and hfa3842 MAC controller chips used in the
- * Prism I & II chipsets.
- *
- * This is not a complete driver, just low-level access routines for
- * the MAC controller itself.
- *
- * Based on the prism2 driver from Absolute Value Systems' linux-wlan
- * project, the Linux wvlan_cs driver, Lucent's HCF-Light
- * (wvlan_hcf.c) library, and the NetBSD wireless driver.
- *
- * Copyright (C) 2000, David Gibson, Linuxcare Australia.
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- *
- * Portions taken from hfa384x.h.
- * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
- */
-
-#ifndef _HERMES_H
-#define _HERMES_H
-
-/* Notes on locking:
- *
- * As a module of low level hardware access routines, there is no
- * locking. Users of this module should ensure that they serialize
- * access to the hermes structure, and to the hardware
-*/
-
-#include <linux/if_ether.h>
-#include <linux/io.h>
-
-/*
- * Limits and constants
- */
-#define		HERMES_ALLOC_LEN_MIN		(4)
-#define		HERMES_ALLOC_LEN_MAX		(2400)
-#define		HERMES_LTV_LEN_MAX		(34)
-#define		HERMES_BAP_DATALEN_MAX		(4096)
-#define		HERMES_BAP_OFFSET_MAX		(4096)
-#define		HERMES_PORTID_MAX		(7)
-#define		HERMES_NUMPORTS_MAX		(HERMES_PORTID_MAX + 1)
-#define		HERMES_PDR_LEN_MAX		(260)	/* in bytes, from EK */
-#define		HERMES_PDA_RECS_MAX		(200)	/* a guess */
-#define		HERMES_PDA_LEN_MAX		(1024)	/* in bytes, from EK */
-#define		HERMES_SCANRESULT_MAX		(35)
-#define		HERMES_CHINFORESULT_MAX		(8)
-#define		HERMES_MAX_MULTICAST		(16)
-#define		HERMES_MAGIC			(0x7d1f)
-
-/*
- * Hermes register offsets
- */
-#define		HERMES_CMD			(0x00)
-#define		HERMES_PARAM0			(0x02)
-#define		HERMES_PARAM1			(0x04)
-#define		HERMES_PARAM2			(0x06)
-#define		HERMES_STATUS			(0x08)
-#define		HERMES_RESP0			(0x0A)
-#define		HERMES_RESP1			(0x0C)
-#define		HERMES_RESP2			(0x0E)
-#define		HERMES_INFOFID			(0x10)
-#define		HERMES_RXFID			(0x20)
-#define		HERMES_ALLOCFID			(0x22)
-#define		HERMES_TXCOMPLFID		(0x24)
-#define		HERMES_SELECT0			(0x18)
-#define		HERMES_OFFSET0			(0x1C)
-#define		HERMES_DATA0			(0x36)
-#define		HERMES_SELECT1			(0x1A)
-#define		HERMES_OFFSET1			(0x1E)
-#define		HERMES_DATA1			(0x38)
-#define		HERMES_EVSTAT			(0x30)
-#define		HERMES_INTEN			(0x32)
-#define		HERMES_EVACK			(0x34)
-#define		HERMES_CONTROL			(0x14)
-#define		HERMES_SWSUPPORT0		(0x28)
-#define		HERMES_SWSUPPORT1		(0x2A)
-#define		HERMES_SWSUPPORT2		(0x2C)
-#define		HERMES_AUXPAGE			(0x3A)
-#define		HERMES_AUXOFFSET		(0x3C)
-#define		HERMES_AUXDATA			(0x3E)
-
-/*
- * CMD register bitmasks
- */
-#define		HERMES_CMD_BUSY			(0x8000)
-#define		HERMES_CMD_AINFO		(0x7f00)
-#define		HERMES_CMD_MACPORT		(0x0700)
-#define		HERMES_CMD_RECL			(0x0100)
-#define		HERMES_CMD_WRITE		(0x0100)
-#define		HERMES_CMD_PROGMODE		(0x0300)
-#define		HERMES_CMD_CMDCODE		(0x003f)
-
-/*
- * STATUS register bitmasks
- */
-#define		HERMES_STATUS_RESULT		(0x7f00)
-#define		HERMES_STATUS_CMDCODE		(0x003f)
-
-/*
- * OFFSET register bitmasks
- */
-#define		HERMES_OFFSET_BUSY		(0x8000)
-#define		HERMES_OFFSET_ERR		(0x4000)
-#define		HERMES_OFFSET_DATAOFF		(0x0ffe)
-
-/*
- * Event register bitmasks (INTEN, EVSTAT, EVACK)
- */
-#define		HERMES_EV_TICK			(0x8000)
-#define		HERMES_EV_WTERR			(0x4000)
-#define		HERMES_EV_INFDROP		(0x2000)
-#define		HERMES_EV_INFO			(0x0080)
-#define		HERMES_EV_DTIM			(0x0020)
-#define		HERMES_EV_CMD			(0x0010)
-#define		HERMES_EV_ALLOC			(0x0008)
-#define		HERMES_EV_TXEXC			(0x0004)
-#define		HERMES_EV_TX			(0x0002)
-#define		HERMES_EV_RX			(0x0001)
-
-/*
- * Command codes
- */
-/*--- Controller Commands ----------------------------*/
-#define		HERMES_CMD_INIT			(0x0000)
-#define		HERMES_CMD_ENABLE		(0x0001)
-#define		HERMES_CMD_DISABLE		(0x0002)
-#define		HERMES_CMD_DIAG			(0x0003)
-
-/*--- Buffer Mgmt Commands ---------------------------*/
-#define		HERMES_CMD_ALLOC		(0x000A)
-#define		HERMES_CMD_TX			(0x000B)
-
-/*--- Regulate Commands ------------------------------*/
-#define		HERMES_CMD_NOTIFY		(0x0010)
-#define		HERMES_CMD_INQUIRE		(0x0011)
-
-/*--- Configure Commands -----------------------------*/
-#define		HERMES_CMD_ACCESS		(0x0021)
-#define		HERMES_CMD_DOWNLD		(0x0022)
-
-/*--- Serial I/O Commands ----------------------------*/
-#define		HERMES_CMD_READMIF		(0x0030)
-#define		HERMES_CMD_WRITEMIF		(0x0031)
-
-/*--- Debugging Commands -----------------------------*/
-#define		HERMES_CMD_TEST			(0x0038)
-
-
-/* Test command arguments */
-#define		HERMES_TEST_SET_CHANNEL		0x0800
-#define		HERMES_TEST_MONITOR		0x0b00
-#define		HERMES_TEST_STOP		0x0f00
-
-/* Authentication algorithms */
-#define		HERMES_AUTH_OPEN		1
-#define		HERMES_AUTH_SHARED_KEY		2
-
-/* WEP settings */
-#define		HERMES_WEP_PRIVACY_INVOKED	0x0001
-#define		HERMES_WEP_EXCL_UNENCRYPTED	0x0002
-#define		HERMES_WEP_HOST_ENCRYPT		0x0010
-#define		HERMES_WEP_HOST_DECRYPT		0x0080
-
-/* Symbol hostscan options */
-#define		HERMES_HOSTSCAN_SYMBOL_5SEC	0x0001
-#define		HERMES_HOSTSCAN_SYMBOL_ONCE	0x0002
-#define		HERMES_HOSTSCAN_SYMBOL_PASSIVE	0x0040
-#define		HERMES_HOSTSCAN_SYMBOL_BCAST	0x0080
-
-/*
- * Frame structures and constants
- */
-
-#define HERMES_DESCRIPTOR_OFFSET	0
-#define HERMES_802_11_OFFSET		(14)
-#define HERMES_802_3_OFFSET		(14 + 32)
-#define HERMES_802_2_OFFSET		(14 + 32 + 14)
-#define HERMES_TXCNTL2_OFFSET		(HERMES_802_3_OFFSET - 2)
-
-#define HERMES_RXSTAT_ERR		(0x0003)
-#define	HERMES_RXSTAT_BADCRC		(0x0001)
-#define	HERMES_RXSTAT_UNDECRYPTABLE	(0x0002)
-#define	HERMES_RXSTAT_MIC		(0x0010)	/* Frame contains MIC */
-#define	HERMES_RXSTAT_MACPORT		(0x0700)
-#define HERMES_RXSTAT_PCF		(0x1000)	/* Frame was received in CF period */
-#define	HERMES_RXSTAT_MIC_KEY_ID	(0x1800)	/* MIC key used */
-#define	HERMES_RXSTAT_MSGTYPE		(0xE000)
-#define	HERMES_RXSTAT_1042		(0x2000)	/* RFC-1042 frame */
-#define	HERMES_RXSTAT_TUNNEL		(0x4000)	/* bridge-tunnel encoded frame */
-#define	HERMES_RXSTAT_WMP		(0x6000)	/* Wavelan-II Management Protocol frame */
-
-/* Shift amount for key ID in RXSTAT and TXCTRL */
-#define	HERMES_MIC_KEY_ID_SHIFT		11
-
-struct hermes_tx_descriptor {
-	__le16 status;
-	__le16 reserved1;
-	__le16 reserved2;
-	__le32 sw_support;
-	u8 retry_count;
-	u8 tx_rate;
-	__le16 tx_control;
-} __packed;
-
-#define HERMES_TXSTAT_RETRYERR		(0x0001)
-#define HERMES_TXSTAT_AGEDERR		(0x0002)
-#define HERMES_TXSTAT_DISCON		(0x0004)
-#define HERMES_TXSTAT_FORMERR		(0x0008)
-
-#define HERMES_TXCTRL_TX_OK		(0x0002)	/* ?? interrupt on Tx complete */
-#define HERMES_TXCTRL_TX_EX		(0x0004)	/* ?? interrupt on Tx exception */
-#define HERMES_TXCTRL_802_11		(0x0008)	/* We supply 802.11 header */
-#define HERMES_TXCTRL_MIC		(0x0010)	/* 802.3 + TKIP */
-#define HERMES_TXCTRL_MIC_KEY_ID	(0x1800)	/* MIC Key ID mask */
-#define HERMES_TXCTRL_ALT_RTRY		(0x0020)
-
-/* Inquiry constants and data types */
-
-#define HERMES_INQ_TALLIES		(0xF100)
-#define HERMES_INQ_SCAN			(0xF101)
-#define HERMES_INQ_CHANNELINFO		(0xF102)
-#define HERMES_INQ_HOSTSCAN		(0xF103)
-#define HERMES_INQ_HOSTSCAN_SYMBOL	(0xF104)
-#define HERMES_INQ_LINKSTATUS		(0xF200)
-#define HERMES_INQ_SEC_STAT_AGERE	(0xF202)
-
-struct hermes_tallies_frame {
-	__le16 TxUnicastFrames;
-	__le16 TxMulticastFrames;
-	__le16 TxFragments;
-	__le16 TxUnicastOctets;
-	__le16 TxMulticastOctets;
-	__le16 TxDeferredTransmissions;
-	__le16 TxSingleRetryFrames;
-	__le16 TxMultipleRetryFrames;
-	__le16 TxRetryLimitExceeded;
-	__le16 TxDiscards;
-	__le16 RxUnicastFrames;
-	__le16 RxMulticastFrames;
-	__le16 RxFragments;
-	__le16 RxUnicastOctets;
-	__le16 RxMulticastOctets;
-	__le16 RxFCSErrors;
-	__le16 RxDiscards_NoBuffer;
-	__le16 TxDiscardsWrongSA;
-	__le16 RxWEPUndecryptable;
-	__le16 RxMsgInMsgFragments;
-	__le16 RxMsgInBadMsgFragments;
-	/* Those last are probably not available in very old firmwares */
-	__le16 RxDiscards_WEPICVError;
-	__le16 RxDiscards_WEPExcluded;
-} __packed;
-
-/* Grabbed from wlan-ng - Thanks Mark... - Jean II
- * This is the result of a scan inquiry command */
-/* Structure describing info about an Access Point */
-struct prism2_scan_apinfo {
-	__le16 channel;		/* Channel where the AP sits */
-	__le16 noise;		/* Noise level */
-	__le16 level;		/* Signal level */
-	u8 bssid[ETH_ALEN];	/* MAC address of the Access Point */
-	__le16 beacon_interv;	/* Beacon interval */
-	__le16 capabilities;	/* Capabilities */
-	__le16 essid_len;	/* ESSID length */
-	u8 essid[32];		/* ESSID of the network */
-	u8 rates[10];		/* Bit rate supported */
-	__le16 proberesp_rate;	/* Data rate of the response frame */
-	__le16 atim;		/* ATIM window time, Kus (hostscan only) */
-} __packed;
-
-/* Same stuff for the Lucent/Agere card.
- * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
-struct agere_scan_apinfo {
-	__le16 channel;		/* Channel where the AP sits */
-	__le16 noise;		/* Noise level */
-	__le16 level;		/* Signal level */
-	u8 bssid[ETH_ALEN];	/* MAC address of the Access Point */
-	__le16 beacon_interv;	/* Beacon interval */
-	__le16 capabilities;	/* Capabilities */
-	/* bits: 0-ess, 1-ibss, 4-privacy [wep] */
-	__le16 essid_len;	/* ESSID length */
-	u8 essid[32];		/* ESSID of the network */
-} __packed;
-
-/* Moustafa: Scan structure for Symbol cards */
-struct symbol_scan_apinfo {
-	u8 channel;		/* Channel where the AP sits */
-	u8 unknown1;		/* 8 in 2.9x and 3.9x f/w, 0 otherwise */
-	__le16 noise;		/* Noise level */
-	__le16 level;		/* Signal level */
-	u8 bssid[ETH_ALEN];	/* MAC address of the Access Point */
-	__le16 beacon_interv;	/* Beacon interval */
-	__le16 capabilities;	/* Capabilities */
-	/* bits: 0-ess, 1-ibss, 4-privacy [wep] */
-	__le16 essid_len;	/* ESSID length */
-	u8 essid[32];		/* ESSID of the network */
-	__le16 rates[5];	/* Bit rate supported */
-	__le16 basic_rates;	/* Basic rates bitmask */
-	u8 unknown2[6];		/* Always FF:FF:FF:FF:00:00 */
-	u8 unknown3[8];		/* Always 0, appeared in f/w 3.91-68 */
-} __packed;
-
-union hermes_scan_info {
-	struct agere_scan_apinfo	a;
-	struct prism2_scan_apinfo	p;
-	struct symbol_scan_apinfo	s;
-};
-
-/* Extended scan struct for HERMES_INQ_CHANNELINFO.
- * wl_lkm calls this an ACS scan (Automatic Channel Select).
- * Keep out of union hermes_scan_info because it is much bigger than
- * the older scan structures. */
-struct agere_ext_scan_info {
-	__le16	reserved0;
-
-	u8	noise;
-	u8	level;
-	u8	rx_flow;
-	u8	rate;
-	__le16	reserved1[2];
-
-	__le16	frame_control;
-	__le16	dur_id;
-	u8	addr1[ETH_ALEN];
-	u8	addr2[ETH_ALEN];
-	u8	bssid[ETH_ALEN];
-	__le16	sequence;
-	u8	addr4[ETH_ALEN];
-
-	__le16	data_length;
-
-	/* Next 3 fields do not get filled in. */
-	u8	daddr[ETH_ALEN];
-	u8	saddr[ETH_ALEN];
-	__le16	len_type;
-
-	__le64	timestamp;
-	__le16	beacon_interval;
-	__le16	capabilities;
-	u8	data[];
-} __packed;
-
-#define HERMES_LINKSTATUS_NOT_CONNECTED   (0x0000)
-#define HERMES_LINKSTATUS_CONNECTED       (0x0001)
-#define HERMES_LINKSTATUS_DISCONNECTED    (0x0002)
-#define HERMES_LINKSTATUS_AP_CHANGE       (0x0003)
-#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
-#define HERMES_LINKSTATUS_AP_IN_RANGE     (0x0005)
-#define HERMES_LINKSTATUS_ASSOC_FAILED    (0x0006)
-
-struct hermes_linkstatus {
-	__le16 linkstatus;         /* Link status */
-} __packed;
-
-struct hermes_response {
-	u16 status, resp0, resp1, resp2;
-};
-
-/* "ID" structure - used for ESSID and station nickname */
-struct hermes_idstring {
-	__le16 len;
-	__le16 val[16];
-} __packed;
-
-struct hermes_multicast {
-	u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
-} __packed;
-
-/* Timeouts */
-#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
-
-struct hermes;
-
-/* Functions to access hardware */
-struct hermes_ops {
-	int (*init)(struct hermes *hw);
-	int (*cmd_wait)(struct hermes *hw, u16 cmd, u16 parm0,
-			struct hermes_response *resp);
-	int (*init_cmd_wait)(struct hermes *hw, u16 cmd,
-			     u16 parm0, u16 parm1, u16 parm2,
-			     struct hermes_response *resp);
-	int (*allocate)(struct hermes *hw, u16 size, u16 *fid);
-	int (*read_ltv)(struct hermes *hw, int bap, u16 rid, unsigned buflen,
-			u16 *length, void *buf);
-	int (*read_ltv_pr)(struct hermes *hw, int bap, u16 rid,
-			      unsigned buflen, u16 *length, void *buf);
-	int (*write_ltv)(struct hermes *hw, int bap, u16 rid,
-			 u16 length, const void *value);
-	int (*bap_pread)(struct hermes *hw, int bap, void *buf, int len,
-			 u16 id, u16 offset);
-	int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf,
-			  int len, u16 id, u16 offset);
-	int (*read_pda)(struct hermes *hw, __le16 *pda,
-			u32 pda_addr, u16 pda_len);
-	int (*program_init)(struct hermes *hw, u32 entry_point);
-	int (*program_end)(struct hermes *hw);
-	int (*program)(struct hermes *hw, const char *buf,
-		       u32 addr, u32 len);
-	void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags);
-	void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags);
-	void (*lock_irq)(spinlock_t *lock);
-	void (*unlock_irq)(spinlock_t *lock);
-};
-
-/* Basic control structure */
-struct hermes {
-	void __iomem *iobase;
-	int reg_spacing;
-#define HERMES_16BIT_REGSPACING	0
-#define HERMES_32BIT_REGSPACING	1
-	u16 inten; /* Which interrupts should be enabled? */
-	bool eeprom_pda;
-	const struct hermes_ops *ops;
-	void *priv;
-};
-
-/* Register access convenience macros */
-#define hermes_read_reg(hw, off) \
-	(ioread16((hw)->iobase + ((off) << (hw)->reg_spacing)))
-#define hermes_write_reg(hw, off, val) \
-	(iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
-#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
-#define hermes_write_regn(hw, name, val) \
-	hermes_write_reg((hw), HERMES_##name, (val))
-
-/* Function prototypes */
-void hermes_struct_init(struct hermes *hw, void __iomem *address,
-			int reg_spacing);
-
-/* Inline functions */
-
-static inline int hermes_present(struct hermes *hw)
-{
-	return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC;
-}
-
-static inline void hermes_set_irqmask(struct hermes *hw, u16 events)
-{
-	hw->inten = events;
-	hermes_write_regn(hw, INTEN, events);
-}
-
-static inline int hermes_enable_port(struct hermes *hw, int port)
-{
-	return hw->ops->cmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
-				 0, NULL);
-}
-
-static inline int hermes_disable_port(struct hermes *hw, int port)
-{
-	return hw->ops->cmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
-				 0, NULL);
-}
-
-/* Initiate an INQUIRE command (tallies or scan).  The result will come as an
- * information frame in __orinoco_ev_info() */
-static inline int hermes_inquire(struct hermes *hw, u16 rid)
-{
-	return hw->ops->cmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
-}
-
-#define HERMES_BYTES_TO_RECLEN(n) ((((n) + 1) / 2) + 1)
-#define HERMES_RECLEN_TO_BYTES(n) (((n) - 1) * 2)
-
-/* Note that for the next two, the count is in 16-bit words, not bytes */
-static inline void hermes_read_words(struct hermes *hw, int off,
-				     void *buf, unsigned count)
-{
-	off = off << hw->reg_spacing;
-	ioread16_rep(hw->iobase + off, buf, count);
-}
-
-static inline void hermes_write_bytes(struct hermes *hw, int off,
-				      const char *buf, unsigned count)
-{
-	off = off << hw->reg_spacing;
-	iowrite16_rep(hw->iobase + off, buf, count >> 1);
-	if (unlikely(count & 1))
-		iowrite8(buf[count - 1], hw->iobase + off);
-}
-
-static inline void hermes_clear_words(struct hermes *hw, int off,
-				      unsigned count)
-{
-	unsigned i;
-
-	off = off << hw->reg_spacing;
-
-	for (i = 0; i < count; i++)
-		iowrite16(0, hw->iobase + off);
-}
-
-#define HERMES_READ_RECORD(hw, bap, rid, buf) \
-	(hw->ops->read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
-#define HERMES_READ_RECORD_PR(hw, bap, rid, buf) \
-	(hw->ops->read_ltv_pr((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
-#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
-	(hw->ops->write_ltv((hw), (bap), (rid), \
-			    HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf)))
-
-static inline int hermes_read_wordrec(struct hermes *hw, int bap, u16 rid,
-				      u16 *word)
-{
-	__le16 rec;
-	int err;
-
-	err = HERMES_READ_RECORD(hw, bap, rid, &rec);
-	*word = le16_to_cpu(rec);
-	return err;
-}
-
-static inline int hermes_read_wordrec_pr(struct hermes *hw, int bap, u16 rid,
-					 u16 *word)
-{
-	__le16 rec;
-	int err;
-
-	err = HERMES_READ_RECORD_PR(hw, bap, rid, &rec);
-	*word = le16_to_cpu(rec);
-	return err;
-}
-
-static inline int hermes_write_wordrec(struct hermes *hw, int bap, u16 rid,
-				       u16 word)
-{
-	__le16 rec = cpu_to_le16(word);
-	return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
-}
-
-#endif  /* _HERMES_H */
diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.c b/drivers/net/wireless/intersil/orinoco/hermes_dld.c
deleted file mode 100644
index dbeadfcfef..0000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes_dld.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Hermes download helper.
- *
- * This helper:
- *  - is capable of writing to the volatile area of the hermes device
- *  - is currently not capable of writing to non-volatile areas
- *  - provide helpers to identify and update plugin data
- *  - is not capable of interpreting a fw image directly. That is up to
- *    the main card driver.
- *  - deals with Hermes I devices. It can probably be modified to deal
- *    with Hermes II devices
- *
- * Copyright (C) 2007, David Kilroy
- *
- * Plug data code slightly modified from spectrum_cs driver
- *    Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
- * Portions based on information in wl_lkm_718 Agere driver
- *    COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include "hermes.h"
-#include "hermes_dld.h"
-
-#define PFX "hermes_dld: "
-
-/* End markers used in dblocks */
-#define PDI_END		0x00000000	/* End of PDA */
-#define BLOCK_END	0xFFFFFFFF	/* Last image block */
-#define TEXT_END	0x1A		/* End of text header */
-
-/*
- * The following structures have little-endian fields denoted by
- * the leading underscore.  Don't access them directly - use inline
- * functions defined below.
- */
-
-/*
- * The binary image to be downloaded consists of series of data blocks.
- * Each block has the following structure.
- */
-struct dblock {
-	__le32 addr;		/* adapter address where to write the block */
-	__le16 len;		/* length of the data only, in bytes */
-	char data[];		/* data to be written */
-} __packed;
-
-/*
- * Plug Data References are located in the image after the last data
- * block.  They refer to areas in the adapter memory where the plug data
- * items with matching ID should be written.
- */
-struct pdr {
-	__le32 id;		/* record ID */
-	__le32 addr;		/* adapter address where to write the data */
-	__le32 len;		/* expected length of the data, in bytes */
-	char next[];		/* next PDR starts here */
-} __packed;
-
-/*
- * Plug Data Items are located in the EEPROM read from the adapter by
- * primary firmware.  They refer to the device-specific data that should
- * be plugged into the secondary firmware.
- */
-struct pdi {
-	__le16 len;		/* length of ID and data, in words */
-	__le16 id;		/* record ID */
-	char data[];		/* plug data */
-} __packed;
-
-/*** FW data block access functions ***/
-
-static inline u32
-dblock_addr(const struct dblock *blk)
-{
-	return le32_to_cpu(blk->addr);
-}
-
-static inline u32
-dblock_len(const struct dblock *blk)
-{
-	return le16_to_cpu(blk->len);
-}
-
-/*** PDR Access functions ***/
-
-static inline u32
-pdr_id(const struct pdr *pdr)
-{
-	return le32_to_cpu(pdr->id);
-}
-
-static inline u32
-pdr_addr(const struct pdr *pdr)
-{
-	return le32_to_cpu(pdr->addr);
-}
-
-static inline u32
-pdr_len(const struct pdr *pdr)
-{
-	return le32_to_cpu(pdr->len);
-}
-
-/*** PDI Access functions ***/
-
-static inline u32
-pdi_id(const struct pdi *pdi)
-{
-	return le16_to_cpu(pdi->id);
-}
-
-/* Return length of the data only, in bytes */
-static inline u32
-pdi_len(const struct pdi *pdi)
-{
-	return 2 * (le16_to_cpu(pdi->len) - 1);
-}
-
-/*** Plug Data Functions ***/
-
-/*
- * Scan PDR for the record with the specified RECORD_ID.
- * If it's not found, return NULL.
- */
-static const struct pdr *
-hermes_find_pdr(const struct pdr *first_pdr, u32 record_id, const void *end)
-{
-	const struct pdr *pdr = first_pdr;
-
-	end -= sizeof(struct pdr);
-
-	while (((void *) pdr <= end) &&
-	       (pdr_id(pdr) != PDI_END)) {
-		/*
-		 * PDR area is currently not terminated by PDI_END.
-		 * It's followed by CRC records, which have the type
-		 * field where PDR has length.  The type can be 0 or 1.
-		 */
-		if (pdr_len(pdr) < 2)
-			return NULL;
-
-		/* If the record ID matches, we are done */
-		if (pdr_id(pdr) == record_id)
-			return pdr;
-
-		pdr = (struct pdr *) pdr->next;
-	}
-	return NULL;
-}
-
-/* Scan production data items for a particular entry */
-static const struct pdi *
-hermes_find_pdi(const struct pdi *first_pdi, u32 record_id, const void *end)
-{
-	const struct pdi *pdi = first_pdi;
-
-	end -= sizeof(struct pdi);
-
-	while (((void *) pdi <= end) &&
-	       (pdi_id(pdi) != PDI_END)) {
-
-		/* If the record ID matches, we are done */
-		if (pdi_id(pdi) == record_id)
-			return pdi;
-
-		pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
-	}
-	return NULL;
-}
-
-/* Process one Plug Data Item - find corresponding PDR and plug it */
-static int
-hermes_plug_pdi(struct hermes *hw, const struct pdr *first_pdr,
-		const struct pdi *pdi, const void *pdr_end)
-{
-	const struct pdr *pdr;
-
-	/* Find the PDR corresponding to this PDI */
-	pdr = hermes_find_pdr(first_pdr, pdi_id(pdi), pdr_end);
-
-	/* No match is found, safe to ignore */
-	if (!pdr)
-		return 0;
-
-	/* Lengths of the data in PDI and PDR must match */
-	if (pdi_len(pdi) != pdr_len(pdr))
-		return -EINVAL;
-
-	/* do the actual plugging */
-	hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi));
-
-	return 0;
-}
-
-/* Parse PDA and write the records into the adapter
- *
- * Attempt to write every records that is in the specified pda
- * which also has a valid production data record for the firmware.
- */
-int hermes_apply_pda(struct hermes *hw,
-		     const char *first_pdr,
-		     const void *pdr_end,
-		     const __le16 *pda,
-		     const void *pda_end)
-{
-	int ret;
-	const struct pdi *pdi;
-	const struct pdr *pdr;
-
-	pdr = (const struct pdr *) first_pdr;
-	pda_end -= sizeof(struct pdi);
-
-	/* Go through every PDI and plug them into the adapter */
-	pdi = (const struct pdi *) (pda + 2);
-	while (((void *) pdi <= pda_end) &&
-	       (pdi_id(pdi) != PDI_END)) {
-		ret = hermes_plug_pdi(hw, pdr, pdi, pdr_end);
-		if (ret)
-			return ret;
-
-		/* Increment to the next PDI */
-		pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)];
-	}
-	return 0;
-}
-
-/* Identify the total number of bytes in all blocks
- * including the header data.
- */
-size_t
-hermes_blocks_length(const char *first_block, const void *end)
-{
-	const struct dblock *blk = (const struct dblock *) first_block;
-	int total_len = 0;
-	int len;
-
-	end -= sizeof(*blk);
-
-	/* Skip all blocks to locate Plug Data References
-	 * (Spectrum CS) */
-	while (((void *) blk <= end) &&
-	       (dblock_addr(blk) != BLOCK_END)) {
-		len = dblock_len(blk);
-		total_len += sizeof(*blk) + len;
-		blk = (struct dblock *) &blk->data[len];
-	}
-
-	return total_len;
-}
-
-/*** Hermes programming ***/
-
-/* Program the data blocks */
-int hermes_program(struct hermes *hw, const char *first_block, const void *end)
-{
-	const struct dblock *blk;
-	u32 blkaddr;
-	u32 blklen;
-	int err = 0;
-
-	blk = (const struct dblock *) first_block;
-
-	if ((void *) blk > (end - sizeof(*blk)))
-		return -EIO;
-
-	blkaddr = dblock_addr(blk);
-	blklen = dblock_len(blk);
-
-	while ((blkaddr != BLOCK_END) &&
-	       (((void *) blk + blklen) <= end)) {
-		pr_debug(PFX "Programming block of length %d "
-			 "to address 0x%08x\n", blklen, blkaddr);
-
-		err = hw->ops->program(hw, blk->data, blkaddr, blklen);
-		if (err)
-			break;
-
-		blk = (const struct dblock *) &blk->data[blklen];
-
-		if ((void *) blk > (end - sizeof(*blk)))
-			return -EIO;
-
-		blkaddr = dblock_addr(blk);
-		blklen = dblock_len(blk);
-	}
-	return err;
-}
-
-/*** Default plugging data for Hermes I ***/
-/* Values from wl_lkm_718/hcf/dhf.c */
-
-#define DEFINE_DEFAULT_PDR(pid, length, data)				\
-static const struct {							\
-	__le16 len;							\
-	__le16 id;							\
-	u8 val[length];							\
-} __packed default_pdr_data_##pid = {			\
-	cpu_to_le16((sizeof(default_pdr_data_##pid)/			\
-				sizeof(__le16)) - 1),			\
-	cpu_to_le16(pid),						\
-	data								\
-}
-
-#define DEFAULT_PDR(pid) default_pdr_data_##pid
-
-/*  HWIF Compatibility */
-DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
-
-/* PPPPSign */
-DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00");
-
-/* PPPPProf */
-DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00");
-
-/* Antenna diversity */
-DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F");
-
-/* Modem VCO band Set-up */
-DEFINE_DEFAULT_PDR(0x0160, 28,
-		   "\x00\x00\x00\x00\x00\x00\x00\x00"
-		   "\x00\x00\x00\x00\x00\x00\x00\x00"
-		   "\x00\x00\x00\x00\x00\x00\x00\x00"
-		   "\x00\x00\x00\x00");
-
-/* Modem Rx Gain Table Values */
-DEFINE_DEFAULT_PDR(0x0161, 256,
-		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
-		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
-		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
-		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
-		   "\x3F\x01\x3E\01\x3E\x01\x3D\x01"
-		   "\x3D\x01\x3C\01\x3C\x01\x3B\x01"
-		   "\x3B\x01\x3A\01\x3A\x01\x39\x01"
-		   "\x39\x01\x38\01\x38\x01\x37\x01"
-		   "\x37\x01\x36\01\x36\x01\x35\x01"
-		   "\x35\x01\x34\01\x34\x01\x33\x01"
-		   "\x33\x01\x32\x01\x32\x01\x31\x01"
-		   "\x31\x01\x30\x01\x30\x01\x7B\x01"
-		   "\x7B\x01\x7A\x01\x7A\x01\x79\x01"
-		   "\x79\x01\x78\x01\x78\x01\x77\x01"
-		   "\x77\x01\x76\x01\x76\x01\x75\x01"
-		   "\x75\x01\x74\x01\x74\x01\x73\x01"
-		   "\x73\x01\x72\x01\x72\x01\x71\x01"
-		   "\x71\x01\x70\x01\x70\x01\x68\x01"
-		   "\x68\x01\x67\x01\x67\x01\x66\x01"
-		   "\x66\x01\x65\x01\x65\x01\x57\x01"
-		   "\x57\x01\x56\x01\x56\x01\x55\x01"
-		   "\x55\x01\x54\x01\x54\x01\x53\x01"
-		   "\x53\x01\x52\x01\x52\x01\x51\x01"
-		   "\x51\x01\x50\x01\x50\x01\x48\x01"
-		   "\x48\x01\x47\x01\x47\x01\x46\x01"
-		   "\x46\x01\x45\x01\x45\x01\x44\x01"
-		   "\x44\x01\x43\x01\x43\x01\x42\x01"
-		   "\x42\x01\x41\x01\x41\x01\x40\x01"
-		   "\x40\x01\x40\x01\x40\x01\x40\x01"
-		   "\x40\x01\x40\x01\x40\x01\x40\x01"
-		   "\x40\x01\x40\x01\x40\x01\x40\x01"
-		   "\x40\x01\x40\x01\x40\x01\x40\x01");
-
-/* Write PDA according to certain rules.
- *
- * For every production data record, look for a previous setting in
- * the pda, and use that.
- *
- * For certain records, use defaults if they are not found in pda.
- */
-int hermes_apply_pda_with_defaults(struct hermes *hw,
-				   const char *first_pdr,
-				   const void *pdr_end,
-				   const __le16 *pda,
-				   const void *pda_end)
-{
-	const struct pdr *pdr = (const struct pdr *) first_pdr;
-	const struct pdi *first_pdi = (const struct pdi *) &pda[2];
-	const struct pdi *pdi;
-	const struct pdi *default_pdi = NULL;
-	const struct pdi *outdoor_pdi;
-	int record_id;
-
-	pdr_end -= sizeof(struct pdr);
-
-	while (((void *) pdr <= pdr_end) &&
-	       (pdr_id(pdr) != PDI_END)) {
-		/*
-		 * For spectrum_cs firmwares,
-		 * PDR area is currently not terminated by PDI_END.
-		 * It's followed by CRC records, which have the type
-		 * field where PDR has length.  The type can be 0 or 1.
-		 */
-		if (pdr_len(pdr) < 2)
-			break;
-		record_id = pdr_id(pdr);
-
-		pdi = hermes_find_pdi(first_pdi, record_id, pda_end);
-		if (pdi)
-			pr_debug(PFX "Found record 0x%04x at %p\n",
-				 record_id, pdi);
-
-		switch (record_id) {
-		case 0x110: /* Modem REFDAC values */
-		case 0x120: /* Modem VGDAC values */
-			outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1,
-						      pda_end);
-			default_pdi = NULL;
-			if (outdoor_pdi) {
-				pdi = outdoor_pdi;
-				pr_debug(PFX
-					 "Using outdoor record 0x%04x at %p\n",
-					 record_id + 1, pdi);
-			}
-			break;
-		case 0x5: /*  HWIF Compatibility */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
-			break;
-		case 0x108: /* PPPPSign */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108);
-			break;
-		case 0x109: /* PPPPProf */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109);
-			break;
-		case 0x150: /* Antenna diversity */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150);
-			break;
-		case 0x160: /* Modem VCO band Set-up */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160);
-			break;
-		case 0x161: /* Modem Rx Gain Table Values */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161);
-			break;
-		default:
-			default_pdi = NULL;
-			break;
-		}
-		if (!pdi && default_pdi) {
-			/* Use default */
-			pdi = default_pdi;
-			pr_debug(PFX "Using default record 0x%04x at %p\n",
-				 record_id, pdi);
-		}
-
-		if (pdi) {
-			/* Lengths of the data in PDI and PDR must match */
-			if ((pdi_len(pdi) == pdr_len(pdr)) &&
-			    ((void *) pdi->data + pdi_len(pdi) < pda_end)) {
-				/* do the actual plugging */
-				hw->ops->program(hw, pdi->data, pdr_addr(pdr),
-						 pdi_len(pdi));
-			}
-		}
-
-		pdr++;
-	}
-	return 0;
-}
diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.h b/drivers/net/wireless/intersil/orinoco/hermes_dld.h
deleted file mode 100644
index b5377e232c..0000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes_dld.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2007, David Kilroy
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-#ifndef _HERMES_DLD_H
-#define _HERMES_DLD_H
-
-#include "hermes.h"
-
-int hermesi_program_init(struct hermes *hw, u32 offset);
-int hermesi_program_end(struct hermes *hw);
-int hermes_program(struct hermes *hw, const char *first_block, const void *end);
-
-int hermes_read_pda(struct hermes *hw,
-		    __le16 *pda,
-		    u32 pda_addr,
-		    u16 pda_len,
-		    int use_eeprom);
-int hermes_apply_pda(struct hermes *hw,
-		     const char *first_pdr,
-		     const void *pdr_end,
-		     const __le16 *pda,
-		     const void *pda_end);
-int hermes_apply_pda_with_defaults(struct hermes *hw,
-				   const char *first_pdr,
-				   const void *pdr_end,
-				   const __le16 *pda,
-				   const void *pda_end);
-
-size_t hermes_blocks_length(const char *first_block, const void *end);
-
-#endif /* _HERMES_DLD_H */
diff --git a/drivers/net/wireless/intersil/orinoco/hermes_rid.h b/drivers/net/wireless/intersil/orinoco/hermes_rid.h
deleted file mode 100644
index 42eb67dea1..0000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes_rid.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef _HERMES_RID_H
-#define _HERMES_RID_H
-
-/*
- * Configuration RIDs
- */
-#define HERMES_RID_CNFPORTTYPE			0xFC00
-#define HERMES_RID_CNFOWNMACADDR		0xFC01
-#define HERMES_RID_CNFDESIREDSSID		0xFC02
-#define HERMES_RID_CNFOWNCHANNEL		0xFC03
-#define HERMES_RID_CNFOWNSSID			0xFC04
-#define HERMES_RID_CNFOWNATIMWINDOW		0xFC05
-#define HERMES_RID_CNFSYSTEMSCALE		0xFC06
-#define HERMES_RID_CNFMAXDATALEN		0xFC07
-#define HERMES_RID_CNFWDSADDRESS		0xFC08
-#define HERMES_RID_CNFPMENABLED			0xFC09
-#define HERMES_RID_CNFPMEPS			0xFC0A
-#define HERMES_RID_CNFMULTICASTRECEIVE		0xFC0B
-#define HERMES_RID_CNFMAXSLEEPDURATION		0xFC0C
-#define HERMES_RID_CNFPMHOLDOVERDURATION	0xFC0D
-#define HERMES_RID_CNFOWNNAME			0xFC0E
-#define HERMES_RID_CNFOWNDTIMPERIOD		0xFC10
-#define HERMES_RID_CNFWDSADDRESS1		0xFC11
-#define HERMES_RID_CNFWDSADDRESS2		0xFC12
-#define HERMES_RID_CNFWDSADDRESS3		0xFC13
-#define HERMES_RID_CNFWDSADDRESS4		0xFC14
-#define HERMES_RID_CNFWDSADDRESS5		0xFC15
-#define HERMES_RID_CNFWDSADDRESS6		0xFC16
-#define HERMES_RID_CNFMULTICASTPMBUFFERING	0xFC17
-#define HERMES_RID_CNFWEPENABLED_AGERE		0xFC20
-#define HERMES_RID_CNFAUTHENTICATION_AGERE	0xFC21
-#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL	0xFC21
-#define HERMES_RID_CNFDROPUNENCRYPTED		0xFC22
-#define HERMES_RID_CNFWEPDEFAULTKEYID		0xFC23
-#define HERMES_RID_CNFDEFAULTKEY0		0xFC24
-#define HERMES_RID_CNFDEFAULTKEY1		0xFC25
-#define HERMES_RID_CNFMWOROBUST_AGERE		0xFC25
-#define HERMES_RID_CNFDEFAULTKEY2		0xFC26
-#define HERMES_RID_CNFDEFAULTKEY3		0xFC27
-#define HERMES_RID_CNFWEPFLAGS_INTERSIL		0xFC28
-#define HERMES_RID_CNFWEPKEYMAPPINGTABLE	0xFC29
-#define HERMES_RID_CNFAUTHENTICATION		0xFC2A
-#define HERMES_RID_CNFMAXASSOCSTA		0xFC2B
-#define	HERMES_RID_CNFKEYLENGTH_SYMBOL		0xFC2B
-#define HERMES_RID_CNFTXCONTROL			0xFC2C
-#define HERMES_RID_CNFROAMINGMODE		0xFC2D
-#define HERMES_RID_CNFHOSTAUTHENTICATION	0xFC2E
-#define HERMES_RID_CNFRCVCRCERROR		0xFC30
-#define HERMES_RID_CNFMMLIFE			0xFC31
-#define HERMES_RID_CNFALTRETRYCOUNT		0xFC32
-#define HERMES_RID_CNFBEACONINT			0xFC33
-#define HERMES_RID_CNFAPPCFINFO			0xFC34
-#define HERMES_RID_CNFSTAPCFINFO		0xFC35
-#define HERMES_RID_CNFPRIORITYQUSAGE		0xFC37
-#define HERMES_RID_CNFTIMCTRL			0xFC40
-#define HERMES_RID_CNFTHIRTY2TALLY		0xFC42
-#define HERMES_RID_CNFENHSECURITY		0xFC43
-#define HERMES_RID_CNFGROUPADDRESSES		0xFC80
-#define HERMES_RID_CNFCREATEIBSS		0xFC81
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD	0xFC82
-#define HERMES_RID_CNFRTSTHRESHOLD		0xFC83
-#define HERMES_RID_CNFTXRATECONTROL		0xFC84
-#define HERMES_RID_CNFPROMISCUOUSMODE		0xFC85
-#define HERMES_RID_CNFBASICRATES_SYMBOL		0xFC8A
-#define HERMES_RID_CNFPREAMBLE_SYMBOL		0xFC8C
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0	0xFC90
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1	0xFC91
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2	0xFC92
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3	0xFC93
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4	0xFC94
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5	0xFC95
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6	0xFC96
-#define HERMES_RID_CNFRTSTHRESHOLD0		0xFC97
-#define HERMES_RID_CNFRTSTHRESHOLD1		0xFC98
-#define HERMES_RID_CNFRTSTHRESHOLD2		0xFC99
-#define HERMES_RID_CNFRTSTHRESHOLD3		0xFC9A
-#define HERMES_RID_CNFRTSTHRESHOLD4		0xFC9B
-#define HERMES_RID_CNFRTSTHRESHOLD5		0xFC9C
-#define HERMES_RID_CNFRTSTHRESHOLD6		0xFC9D
-#define HERMES_RID_CNFHOSTSCAN_SYMBOL		0xFCAB
-#define HERMES_RID_CNFSHORTPREAMBLE		0xFCB0
-#define HERMES_RID_CNFWEPKEYS_AGERE		0xFCB0
-#define HERMES_RID_CNFEXCLUDELONGPREAMBLE	0xFCB1
-#define HERMES_RID_CNFTXKEY_AGERE		0xFCB1
-#define HERMES_RID_CNFAUTHENTICATIONRSPTO	0xFCB2
-#define HERMES_RID_CNFSCANSSID_AGERE		0xFCB2
-#define HERMES_RID_CNFBASICRATES		0xFCB3
-#define HERMES_RID_CNFSUPPORTEDRATES		0xFCB4
-#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE	0xFCB4
-#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE	0xFCB5
-#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE	0xFCB6
-#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE	0xFCB7
-#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE	0xFCB8
-#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE	0xFCB9
-#define HERMES_RID_CNFCACHEDPMKADDRESS		0xFCBA
-#define HERMES_RID_CNFREMOVEPMKADDRESS		0xFCBB
-#define HERMES_RID_CNFSCANCHANNELS2GHZ		0xFCC2
-#define HERMES_RID_CNFDISASSOCIATE		0xFCC8
-#define HERMES_RID_CNFTICKTIME			0xFCE0
-#define HERMES_RID_CNFSCANREQUEST		0xFCE1
-#define HERMES_RID_CNFJOINREQUEST		0xFCE2
-#define HERMES_RID_CNFAUTHENTICATESTATION	0xFCE3
-#define HERMES_RID_CNFCHANNELINFOREQUEST	0xFCE4
-#define HERMES_RID_CNFHOSTSCAN			0xFCE5
-
-/*
- * Information RIDs
- */
-#define HERMES_RID_MAXLOADTIME			0xFD00
-#define HERMES_RID_DOWNLOADBUFFER		0xFD01
-#define HERMES_RID_PRIID			0xFD02
-#define HERMES_RID_PRISUPRANGE			0xFD03
-#define HERMES_RID_CFIACTRANGES			0xFD04
-#define HERMES_RID_NICSERNUM			0xFD0A
-#define HERMES_RID_NICID			0xFD0B
-#define HERMES_RID_MFISUPRANGE			0xFD0C
-#define HERMES_RID_CFISUPRANGE			0xFD0D
-#define HERMES_RID_CHANNELLIST			0xFD10
-#define HERMES_RID_REGULATORYDOMAINS		0xFD11
-#define HERMES_RID_TEMPTYPE			0xFD12
-#define HERMES_RID_CIS				0xFD13
-#define HERMES_RID_STAID			0xFD20
-#define HERMES_RID_STASUPRANGE			0xFD21
-#define HERMES_RID_MFIACTRANGES			0xFD22
-#define HERMES_RID_CFIACTRANGES2		0xFD23
-#define HERMES_RID_SECONDARYVERSION_SYMBOL	0xFD24
-#define HERMES_RID_PORTSTATUS			0xFD40
-#define HERMES_RID_CURRENTSSID			0xFD41
-#define HERMES_RID_CURRENTBSSID			0xFD42
-#define HERMES_RID_COMMSQUALITY			0xFD43
-#define HERMES_RID_CURRENTTXRATE		0xFD44
-#define HERMES_RID_CURRENTBEACONINTERVAL	0xFD45
-#define HERMES_RID_CURRENTSCALETHRESHOLDS	0xFD46
-#define HERMES_RID_PROTOCOLRSPTIME		0xFD47
-#define HERMES_RID_SHORTRETRYLIMIT		0xFD48
-#define HERMES_RID_LONGRETRYLIMIT		0xFD49
-#define HERMES_RID_MAXTRANSMITLIFETIME		0xFD4A
-#define HERMES_RID_MAXRECEIVELIFETIME		0xFD4B
-#define HERMES_RID_CFPOLLABLE			0xFD4C
-#define HERMES_RID_AUTHENTICATIONALGORITHMS	0xFD4D
-#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED	0xFD4F
-#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL	0xFD51
-#define HERMES_RID_CURRENTTXRATE1		0xFD80
-#define HERMES_RID_CURRENTTXRATE2		0xFD81
-#define HERMES_RID_CURRENTTXRATE3		0xFD82
-#define HERMES_RID_CURRENTTXRATE4		0xFD83
-#define HERMES_RID_CURRENTTXRATE5		0xFD84
-#define HERMES_RID_CURRENTTXRATE6		0xFD85
-#define HERMES_RID_OWNMACADDR			0xFD86
-#define HERMES_RID_SCANRESULTSTABLE		0xFD88
-#define HERMES_RID_CURRENT_COUNTRY_INFO		0xFD89
-#define HERMES_RID_CURRENT_WPA_IE		0xFD8A
-#define HERMES_RID_CURRENT_TKIP_IV		0xFD8B
-#define HERMES_RID_CURRENT_ASSOC_REQ_INFO	0xFD8C
-#define HERMES_RID_CURRENT_ASSOC_RESP_INFO	0xFD8D
-#define HERMES_RID_TXQUEUEEMPTY			0xFD91
-#define HERMES_RID_PHYTYPE			0xFDC0
-#define HERMES_RID_CURRENTCHANNEL		0xFDC1
-#define HERMES_RID_CURRENTPOWERSTATE		0xFDC2
-#define HERMES_RID_CCAMODE			0xFDC3
-#define HERMES_RID_SUPPORTEDDATARATES		0xFDC6
-#define HERMES_RID_BUILDSEQ			0xFFFE
-#define HERMES_RID_FWID				0xFFFF
-
-#endif
diff --git a/drivers/net/wireless/intersil/orinoco/hw.c b/drivers/net/wireless/intersil/orinoco/hw.c
deleted file mode 100644
index 4fcca08e50..0000000000
--- a/drivers/net/wireless/intersil/orinoco/hw.c
+++ /dev/null
@@ -1,1362 +0,0 @@
-/* Encapsulate basic setting changes and retrieval on Hermes hardware
- *
- * See copyright notice in main.c
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/if_arp.h>
-#include <linux/ieee80211.h>
-#include <linux/wireless.h>
-#include <net/cfg80211.h>
-#include "hermes.h"
-#include "hermes_rid.h"
-#include "orinoco.h"
-
-#include "hw.h"
-
-#define SYMBOL_MAX_VER_LEN	(14)
-
-/* Symbol firmware has a bug allocating buffers larger than this */
-#define TX_NICBUF_SIZE_BUG	1585
-
-/********************************************************************/
-/* Data tables                                                      */
-/********************************************************************/
-
-/* This tables gives the actual meanings of the bitrate IDs returned
- * by the firmware. */
-static const struct {
-	int bitrate; /* in 100s of kilobits */
-	int automatic;
-	u16 agere_txratectrl;
-	u16 intersil_txratectrl;
-} bitrate_table[] = {
-	{110, 1,  3, 15}, /* Entry 0 is the default */
-	{10,  0,  1,  1},
-	{10,  1,  1,  1},
-	{20,  0,  2,  2},
-	{20,  1,  6,  3},
-	{55,  0,  4,  4},
-	{55,  1,  7,  7},
-	{110, 0,  5,  8},
-};
-#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
-
-/* Firmware version encoding */
-struct comp_id {
-	u16 id, variant, major, minor;
-} __packed;
-
-static inline enum fwtype determine_firmware_type(struct comp_id *nic_id)
-{
-	if (nic_id->id < 0x8000)
-		return FIRMWARE_TYPE_AGERE;
-	else if (nic_id->id == 0x8000 && nic_id->major == 0)
-		return FIRMWARE_TYPE_SYMBOL;
-	else
-		return FIRMWARE_TYPE_INTERSIL;
-}
-
-/* Set priv->firmware type, determine firmware properties
- * This function can be called before we have registerred with netdev,
- * so all errors go out with dev_* rather than printk
- *
- * If non-NULL stores a firmware description in fw_name.
- * If non-NULL stores a HW version in hw_ver
- *
- * These are output via generic cfg80211 ethtool support.
- */
-int determine_fw_capabilities(struct orinoco_private *priv,
-			      char *fw_name, size_t fw_name_len,
-			      u32 *hw_ver)
-{
-	struct device *dev = priv->dev;
-	struct hermes *hw = &priv->hw;
-	int err;
-	struct comp_id nic_id, sta_id;
-	unsigned int firmver;
-	char tmp[SYMBOL_MAX_VER_LEN + 1] __attribute__((aligned(2)));
-
-	/* Get the hardware version */
-	err = HERMES_READ_RECORD_PR(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
-	if (err) {
-		dev_err(dev, "Cannot read hardware identity: error %d\n",
-			err);
-		return err;
-	}
-
-	le16_to_cpus(&nic_id.id);
-	le16_to_cpus(&nic_id.variant);
-	le16_to_cpus(&nic_id.major);
-	le16_to_cpus(&nic_id.minor);
-	dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n",
-		 nic_id.id, nic_id.variant, nic_id.major, nic_id.minor);
-
-	if (hw_ver)
-		*hw_ver = (((nic_id.id & 0xff) << 24) |
-			   ((nic_id.variant & 0xff) << 16) |
-			   ((nic_id.major & 0xff) << 8) |
-			   (nic_id.minor & 0xff));
-
-	priv->firmware_type = determine_firmware_type(&nic_id);
-
-	/* Get the firmware version */
-	err = HERMES_READ_RECORD_PR(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
-	if (err) {
-		dev_err(dev, "Cannot read station identity: error %d\n",
-			err);
-		return err;
-	}
-
-	le16_to_cpus(&sta_id.id);
-	le16_to_cpus(&sta_id.variant);
-	le16_to_cpus(&sta_id.major);
-	le16_to_cpus(&sta_id.minor);
-	dev_info(dev, "Station identity  %04x:%04x:%04x:%04x\n",
-		 sta_id.id, sta_id.variant, sta_id.major, sta_id.minor);
-
-	switch (sta_id.id) {
-	case 0x15:
-		dev_err(dev, "Primary firmware is active\n");
-		return -ENODEV;
-	case 0x14b:
-		dev_err(dev, "Tertiary firmware is active\n");
-		return -ENODEV;
-	case 0x1f:	/* Intersil, Agere, Symbol Spectrum24 */
-	case 0x21:	/* Symbol Spectrum24 Trilogy */
-		break;
-	default:
-		dev_notice(dev, "Unknown station ID, please report\n");
-		break;
-	}
-
-	/* Default capabilities */
-	priv->has_sensitivity = 1;
-	priv->has_mwo = 0;
-	priv->has_preamble = 0;
-	priv->has_port3 = 1;
-	priv->has_ibss = 1;
-	priv->has_wep = 0;
-	priv->has_big_wep = 0;
-	priv->has_alt_txcntl = 0;
-	priv->has_ext_scan = 0;
-	priv->has_wpa = 0;
-	priv->do_fw_download = 0;
-
-	/* Determine capabilities from the firmware version */
-	switch (priv->firmware_type) {
-	case FIRMWARE_TYPE_AGERE:
-		/* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
-		   ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
-		if (fw_name)
-			snprintf(fw_name, fw_name_len, "Lucent/Agere %d.%02d",
-				 sta_id.major, sta_id.minor);
-
-		firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
-
-		priv->has_ibss = (firmver >= 0x60006);
-		priv->has_wep = (firmver >= 0x40020);
-		priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
-					  Gold cards from the others? */
-		priv->has_mwo = (firmver >= 0x60000);
-		priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
-		priv->ibss_port = 1;
-		priv->has_hostscan = (firmver >= 0x8000a);
-		priv->do_fw_download = 1;
-		priv->broken_monitor = (firmver >= 0x80000);
-		priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */
-		priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */
-		priv->has_wpa = (firmver >= 0x9002a);
-		/* Tested with Agere firmware :
-		 *	1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
-		 * Tested CableTron firmware : 4.32 => Anton */
-		break;
-	case FIRMWARE_TYPE_SYMBOL:
-		/* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
-		/* Intel MAC : 00:02:B3:* */
-		/* 3Com MAC : 00:50:DA:* */
-		memset(tmp, 0, sizeof(tmp));
-		/* Get the Symbol firmware version */
-		err = hw->ops->read_ltv_pr(hw, USER_BAP,
-					HERMES_RID_SECONDARYVERSION_SYMBOL,
-					SYMBOL_MAX_VER_LEN, NULL, &tmp);
-		if (err) {
-			dev_warn(dev, "Error %d reading Symbol firmware info. "
-				 "Wildly guessing capabilities...\n", err);
-			firmver = 0;
-			tmp[0] = '\0';
-		} else {
-			/* The firmware revision is a string, the format is
-			 * something like : "V2.20-01".
-			 * Quick and dirty parsing... - Jean II
-			 */
-			firmver = ((tmp[1] - '0') << 16)
-				| ((tmp[3] - '0') << 12)
-				| ((tmp[4] - '0') << 8)
-				| ((tmp[6] - '0') << 4)
-				| (tmp[7] - '0');
-
-			tmp[SYMBOL_MAX_VER_LEN] = '\0';
-		}
-
-		if (fw_name)
-			snprintf(fw_name, fw_name_len, "Symbol %s", tmp);
-
-		priv->has_ibss = (firmver >= 0x20000);
-		priv->has_wep = (firmver >= 0x15012);
-		priv->has_big_wep = (firmver >= 0x20000);
-		priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
-			       (firmver >= 0x29000 && firmver < 0x30000) ||
-			       firmver >= 0x31000;
-		priv->has_preamble = (firmver >= 0x20000);
-		priv->ibss_port = 4;
-
-		/* Symbol firmware is found on various cards, but
-		 * there has been no attempt to check firmware
-		 * download on non-spectrum_cs based cards.
-		 *
-		 * Given that the Agere firmware download works
-		 * differently, we should avoid doing a firmware
-		 * download with the Symbol algorithm on non-spectrum
-		 * cards.
-		 *
-		 * For now we can identify a spectrum_cs based card
-		 * because it has a firmware reset function.
-		 */
-		priv->do_fw_download = (priv->stop_fw != NULL);
-
-		priv->broken_disableport = (firmver == 0x25013) ||
-				(firmver >= 0x30000 && firmver <= 0x31000);
-		priv->has_hostscan = (firmver >= 0x31001) ||
-				     (firmver >= 0x29057 && firmver < 0x30000);
-		/* Tested with Intel firmware : 0x20015 => Jean II */
-		/* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
-		break;
-	case FIRMWARE_TYPE_INTERSIL:
-		/* D-Link, Linksys, Adtron, ZoomAir, and many others...
-		 * Samsung, Compaq 100/200 and Proxim are slightly
-		 * different and less well tested */
-		/* D-Link MAC : 00:40:05:* */
-		/* Addtron MAC : 00:90:D1:* */
-		if (fw_name)
-			snprintf(fw_name, fw_name_len, "Intersil %d.%d.%d",
-				 sta_id.major, sta_id.minor, sta_id.variant);
-
-		firmver = ((unsigned long)sta_id.major << 16) |
-			((unsigned long)sta_id.minor << 8) | sta_id.variant;
-
-		priv->has_ibss = (firmver >= 0x000700); /* FIXME */
-		priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
-		priv->has_pm = (firmver >= 0x000700);
-		priv->has_hostscan = (firmver >= 0x010301);
-
-		if (firmver >= 0x000800)
-			priv->ibss_port = 0;
-		else {
-			dev_notice(dev, "Intersil firmware earlier than v0.8.x"
-				   " - several features not supported\n");
-			priv->ibss_port = 1;
-		}
-		break;
-	}
-	if (fw_name)
-		dev_info(dev, "Firmware determined as %s\n", fw_name);
-
-#ifndef CONFIG_HERMES_PRISM
-	if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
-		dev_err(dev, "Support for Prism chipset is not enabled\n");
-		return -ENODEV;
-	}
-#endif
-
-	return 0;
-}
-
-/* Read settings from EEPROM into our private structure.
- * MAC address gets dropped into callers buffer
- * Can be called before netdev registration.
- */
-int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr)
-{
-	struct device *dev = priv->dev;
-	struct hermes_idstring nickbuf;
-	struct hermes *hw = &priv->hw;
-	int len;
-	int err;
-	u16 reclen;
-
-	/* Get the MAC address */
-	err = hw->ops->read_ltv_pr(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
-				ETH_ALEN, NULL, dev_addr);
-	if (err) {
-		dev_warn(dev, "Failed to read MAC address!\n");
-		goto out;
-	}
-
-	dev_dbg(dev, "MAC address %pM\n", dev_addr);
-
-	/* Get the station name */
-	err = hw->ops->read_ltv_pr(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
-				sizeof(nickbuf), &reclen, &nickbuf);
-	if (err) {
-		dev_err(dev, "failed to read station name\n");
-		goto out;
-	}
-	if (nickbuf.len)
-		len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
-	else
-		len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
-	memcpy(priv->nick, &nickbuf.val, len);
-	priv->nick[len] = '\0';
-
-	dev_dbg(dev, "Station name \"%s\"\n", priv->nick);
-
-	/* Get allowed channels */
-	err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_CHANNELLIST,
-				  &priv->channel_mask);
-	if (err) {
-		dev_err(dev, "Failed to read channel list!\n");
-		goto out;
-	}
-
-	/* Get initial AP density */
-	err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
-				  &priv->ap_density);
-	if (err || priv->ap_density < 1 || priv->ap_density > 3)
-		priv->has_sensitivity = 0;
-
-	/* Get initial RTS threshold */
-	err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
-				  &priv->rts_thresh);
-	if (err) {
-		dev_err(dev, "Failed to read RTS threshold!\n");
-		goto out;
-	}
-
-	/* Get initial fragmentation settings */
-	if (priv->has_mwo)
-		err = hermes_read_wordrec_pr(hw, USER_BAP,
-					  HERMES_RID_CNFMWOROBUST_AGERE,
-					  &priv->mwo_robust);
-	else
-		err = hermes_read_wordrec_pr(hw, USER_BAP,
-					  HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
-					  &priv->frag_thresh);
-	if (err) {
-		dev_err(dev, "Failed to read fragmentation settings!\n");
-		goto out;
-	}
-
-	/* Power management setup */
-	if (priv->has_pm) {
-		priv->pm_on = 0;
-		priv->pm_mcast = 1;
-		err = hermes_read_wordrec_pr(hw, USER_BAP,
-					  HERMES_RID_CNFMAXSLEEPDURATION,
-					  &priv->pm_period);
-		if (err) {
-			dev_err(dev, "Failed to read power management "
-				"period!\n");
-			goto out;
-		}
-		err = hermes_read_wordrec_pr(hw, USER_BAP,
-					  HERMES_RID_CNFPMHOLDOVERDURATION,
-					  &priv->pm_timeout);
-		if (err) {
-			dev_err(dev, "Failed to read power management "
-				"timeout!\n");
-			goto out;
-		}
-	}
-
-	/* Preamble setup */
-	if (priv->has_preamble) {
-		err = hermes_read_wordrec_pr(hw, USER_BAP,
-					  HERMES_RID_CNFPREAMBLE_SYMBOL,
-					  &priv->preamble);
-		if (err) {
-			dev_err(dev, "Failed to read preamble setup\n");
-			goto out;
-		}
-	}
-
-	/* Retry settings */
-	err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
-				  &priv->short_retry_limit);
-	if (err) {
-		dev_err(dev, "Failed to read short retry limit\n");
-		goto out;
-	}
-
-	err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
-				  &priv->long_retry_limit);
-	if (err) {
-		dev_err(dev, "Failed to read long retry limit\n");
-		goto out;
-	}
-
-	err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
-				  &priv->retry_lifetime);
-	if (err) {
-		dev_err(dev, "Failed to read max retry lifetime\n");
-		goto out;
-	}
-
-out:
-	return err;
-}
-
-/* Can be called before netdev registration */
-int orinoco_hw_allocate_fid(struct orinoco_private *priv)
-{
-	struct device *dev = priv->dev;
-	struct hermes *hw = &priv->hw;
-	int err;
-
-	err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid);
-	if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
-		/* Try workaround for old Symbol firmware bug */
-		priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
-		err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid);
-
-		dev_warn(dev, "Firmware ALLOC bug detected "
-			 "(old Symbol firmware?). Work around %s\n",
-			 err ? "failed!" : "ok.");
-	}
-
-	return err;
-}
-
-int orinoco_get_bitratemode(int bitrate, int automatic)
-{
-	int ratemode = -1;
-	int i;
-
-	if ((bitrate != 10) && (bitrate != 20) &&
-	    (bitrate != 55) && (bitrate != 110))
-		return ratemode;
-
-	for (i = 0; i < BITRATE_TABLE_SIZE; i++) {
-		if ((bitrate_table[i].bitrate == bitrate) &&
-		    (bitrate_table[i].automatic == automatic)) {
-			ratemode = i;
-			break;
-		}
-	}
-	return ratemode;
-}
-
-void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic)
-{
-	BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
-
-	*bitrate = bitrate_table[ratemode].bitrate * 100000;
-	*automatic = bitrate_table[ratemode].automatic;
-}
-
-int orinoco_hw_program_rids(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	struct wireless_dev *wdev = netdev_priv(dev);
-	struct hermes *hw = &priv->hw;
-	int err;
-	struct hermes_idstring idbuf;
-
-	/* Set the MAC address */
-	err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
-				 HERMES_BYTES_TO_RECLEN(ETH_ALEN),
-				 dev->dev_addr);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d setting MAC address\n",
-		       dev->name, err);
-		return err;
-	}
-
-	/* Set up the link mode */
-	err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
-				   priv->port_type);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d setting port type\n",
-		       dev->name, err);
-		return err;
-	}
-	/* Set the channel/frequency */
-	if (priv->channel != 0 && priv->iw_mode != NL80211_IFTYPE_STATION) {
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFOWNCHANNEL,
-					   priv->channel);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d setting channel %d\n",
-			       dev->name, err, priv->channel);
-			return err;
-		}
-	}
-
-	if (priv->has_ibss) {
-		u16 createibss;
-
-		if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
-			printk(KERN_WARNING "%s: This firmware requires an "
-			       "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
-			/* With wvlan_cs, in this case, we would crash.
-			 * hopefully, this driver will behave better...
-			 * Jean II */
-			createibss = 0;
-		} else {
-			createibss = priv->createibss;
-		}
-
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFCREATEIBSS,
-					   createibss);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
-			       dev->name, err);
-			return err;
-		}
-	}
-
-	/* Set the desired BSSID */
-	err = __orinoco_hw_set_wap(priv);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d setting AP address\n",
-		       dev->name, err);
-		return err;
-	}
-
-	/* Set the desired ESSID */
-	idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
-	memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
-	/* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
-	err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
-			HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2),
-			&idbuf);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
-		       dev->name, err);
-		return err;
-	}
-	err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
-			HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2),
-			&idbuf);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
-		       dev->name, err);
-		return err;
-	}
-
-	/* Set the station name */
-	idbuf.len = cpu_to_le16(strlen(priv->nick));
-	memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
-	err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
-				 HERMES_BYTES_TO_RECLEN(strlen(priv->nick) + 2),
-				 &idbuf);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d setting nickname\n",
-		       dev->name, err);
-		return err;
-	}
-
-	/* Set AP density */
-	if (priv->has_sensitivity) {
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFSYSTEMSCALE,
-					   priv->ap_density);
-		if (err) {
-			printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
-			       "Disabling sensitivity control\n",
-			       dev->name, err);
-
-			priv->has_sensitivity = 0;
-		}
-	}
-
-	/* Set RTS threshold */
-	err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
-				   priv->rts_thresh);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
-		       dev->name, err);
-		return err;
-	}
-
-	/* Set fragmentation threshold or MWO robustness */
-	if (priv->has_mwo)
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFMWOROBUST_AGERE,
-					   priv->mwo_robust);
-	else
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
-					   priv->frag_thresh);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d setting fragmentation\n",
-		       dev->name, err);
-		return err;
-	}
-
-	/* Set bitrate */
-	err = __orinoco_hw_set_bitrate(priv);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d setting bitrate\n",
-		       dev->name, err);
-		return err;
-	}
-
-	/* Set power management */
-	if (priv->has_pm) {
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFPMENABLED,
-					   priv->pm_on);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d setting up PM\n",
-			       dev->name, err);
-			return err;
-		}
-
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFMULTICASTRECEIVE,
-					   priv->pm_mcast);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d setting up PM\n",
-			       dev->name, err);
-			return err;
-		}
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFMAXSLEEPDURATION,
-					   priv->pm_period);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d setting up PM\n",
-			       dev->name, err);
-			return err;
-		}
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFPMHOLDOVERDURATION,
-					   priv->pm_timeout);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d setting up PM\n",
-			       dev->name, err);
-			return err;
-		}
-	}
-
-	/* Set preamble - only for Symbol so far... */
-	if (priv->has_preamble) {
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFPREAMBLE_SYMBOL,
-					   priv->preamble);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d setting preamble\n",
-			       dev->name, err);
-			return err;
-		}
-	}
-
-	/* Set up encryption */
-	if (priv->has_wep || priv->has_wpa) {
-		err = __orinoco_hw_setup_enc(priv);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d activating encryption\n",
-			       dev->name, err);
-			return err;
-		}
-	}
-
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
-		/* Enable monitor mode */
-		dev->type = ARPHRD_IEEE80211;
-		err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
-					    HERMES_TEST_MONITOR, 0, NULL);
-	} else {
-		/* Disable monitor mode */
-		dev->type = ARPHRD_ETHER;
-		err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
-					    HERMES_TEST_STOP, 0, NULL);
-	}
-	if (err)
-		return err;
-
-	/* Reset promiscuity / multicast*/
-	priv->promiscuous = 0;
-	priv->mc_count = 0;
-
-	/* Record mode change */
-	wdev->iftype = priv->iw_mode;
-
-	return 0;
-}
-
-/* Get tsc from the firmware */
-int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc)
-{
-	struct hermes *hw = &priv->hw;
-	int err = 0;
-	u8 tsc_arr[4][ORINOCO_SEQ_LEN];
-
-	if ((key < 0) || (key >= 4))
-		return -EINVAL;
-
-	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
-				sizeof(tsc_arr), NULL, &tsc_arr);
-	if (!err)
-		memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0]));
-
-	return err;
-}
-
-int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
-{
-	struct hermes *hw = &priv->hw;
-	int ratemode = priv->bitratemode;
-	int err = 0;
-
-	if (ratemode >= BITRATE_TABLE_SIZE) {
-		printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
-		       priv->ndev->name, ratemode);
-		return -EINVAL;
-	}
-
-	switch (priv->firmware_type) {
-	case FIRMWARE_TYPE_AGERE:
-		err = hermes_write_wordrec(hw, USER_BAP,
-				HERMES_RID_CNFTXRATECONTROL,
-				bitrate_table[ratemode].agere_txratectrl);
-		break;
-	case FIRMWARE_TYPE_INTERSIL:
-	case FIRMWARE_TYPE_SYMBOL:
-		err = hermes_write_wordrec(hw, USER_BAP,
-				HERMES_RID_CNFTXRATECONTROL,
-				bitrate_table[ratemode].intersil_txratectrl);
-		break;
-	default:
-		BUG();
-	}
-
-	return err;
-}
-
-int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate)
-{
-	struct hermes *hw = &priv->hw;
-	int i;
-	int err = 0;
-	u16 val;
-
-	err = hermes_read_wordrec(hw, USER_BAP,
-				  HERMES_RID_CURRENTTXRATE, &val);
-	if (err)
-		return err;
-
-	switch (priv->firmware_type) {
-	case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
-		/* Note : in Lucent firmware, the return value of
-		 * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
-		 * and therefore is totally different from the
-		 * encoding of HERMES_RID_CNFTXRATECONTROL.
-		 * Don't forget that 6Mb/s is really 5.5Mb/s */
-		if (val == 6)
-			*bitrate = 5500000;
-		else
-			*bitrate = val * 1000000;
-		break;
-	case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
-	case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
-		for (i = 0; i < BITRATE_TABLE_SIZE; i++)
-			if (bitrate_table[i].intersil_txratectrl == val) {
-				*bitrate = bitrate_table[i].bitrate * 100000;
-				break;
-			}
-
-		if (i >= BITRATE_TABLE_SIZE) {
-			printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
-			       priv->ndev->name, val);
-			err = -EIO;
-		}
-
-		break;
-	default:
-		BUG();
-	}
-
-	return err;
-}
-
-/* Set fixed AP address */
-int __orinoco_hw_set_wap(struct orinoco_private *priv)
-{
-	int roaming_flag;
-	int err = 0;
-	struct hermes *hw = &priv->hw;
-
-	switch (priv->firmware_type) {
-	case FIRMWARE_TYPE_AGERE:
-		/* not supported */
-		break;
-	case FIRMWARE_TYPE_INTERSIL:
-		if (priv->bssid_fixed)
-			roaming_flag = 2;
-		else
-			roaming_flag = 1;
-
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFROAMINGMODE,
-					   roaming_flag);
-		break;
-	case FIRMWARE_TYPE_SYMBOL:
-		err = HERMES_WRITE_RECORD(hw, USER_BAP,
-					  HERMES_RID_CNFMANDATORYBSSID_SYMBOL,
-					  &priv->desired_bssid);
-		break;
-	}
-	return err;
-}
-
-/* Change the WEP keys and/or the current keys.  Can be called
- * either from __orinoco_hw_setup_enc() or directly from
- * orinoco_ioctl_setiwencode().  In the later case the association
- * with the AP is not broken (if the firmware can handle it),
- * which is needed for 802.1x implementations. */
-int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
-{
-	struct hermes *hw = &priv->hw;
-	int err = 0;
-	int i;
-
-	switch (priv->firmware_type) {
-	case FIRMWARE_TYPE_AGERE:
-	{
-		struct orinoco_key keys[ORINOCO_MAX_KEYS];
-
-		memset(&keys, 0, sizeof(keys));
-		for (i = 0; i < ORINOCO_MAX_KEYS; i++) {
-			int len = min(priv->keys[i].key_len,
-				      ORINOCO_MAX_KEY_SIZE);
-			memcpy(&keys[i].data, priv->keys[i].key, len);
-			if (len > SMALL_KEY_SIZE)
-				keys[i].len = cpu_to_le16(LARGE_KEY_SIZE);
-			else if (len > 0)
-				keys[i].len = cpu_to_le16(SMALL_KEY_SIZE);
-			else
-				keys[i].len = cpu_to_le16(0);
-		}
-
-		err = HERMES_WRITE_RECORD(hw, USER_BAP,
-					  HERMES_RID_CNFWEPKEYS_AGERE,
-					  &keys);
-		if (err)
-			return err;
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFTXKEY_AGERE,
-					   priv->tx_key);
-		if (err)
-			return err;
-		break;
-	}
-	case FIRMWARE_TYPE_INTERSIL:
-	case FIRMWARE_TYPE_SYMBOL:
-		{
-			int keylen;
-
-			/* Force uniform key length to work around
-			 * firmware bugs */
-			keylen = priv->keys[priv->tx_key].key_len;
-
-			if (keylen > LARGE_KEY_SIZE) {
-				printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
-				       priv->ndev->name, priv->tx_key, keylen);
-				return -E2BIG;
-			} else if (keylen > SMALL_KEY_SIZE)
-				keylen = LARGE_KEY_SIZE;
-			else if (keylen > 0)
-				keylen = SMALL_KEY_SIZE;
-			else
-				keylen = 0;
-
-			/* Write all 4 keys */
-			for (i = 0; i < ORINOCO_MAX_KEYS; i++) {
-				u8 key[LARGE_KEY_SIZE] = { 0 };
-
-				memcpy(key, priv->keys[i].key,
-				       priv->keys[i].key_len);
-
-				err = hw->ops->write_ltv(hw, USER_BAP,
-						HERMES_RID_CNFDEFAULTKEY0 + i,
-						HERMES_BYTES_TO_RECLEN(keylen),
-						key);
-				if (err)
-					return err;
-			}
-
-			/* Write the index of the key used in transmission */
-			err = hermes_write_wordrec(hw, USER_BAP,
-						HERMES_RID_CNFWEPDEFAULTKEYID,
-						priv->tx_key);
-			if (err)
-				return err;
-		}
-		break;
-	}
-
-	return 0;
-}
-
-int __orinoco_hw_setup_enc(struct orinoco_private *priv)
-{
-	struct hermes *hw = &priv->hw;
-	int err = 0;
-	int master_wep_flag;
-	int auth_flag;
-	int enc_flag;
-
-	/* Setup WEP keys */
-	if (priv->encode_alg == ORINOCO_ALG_WEP)
-		__orinoco_hw_setup_wepkeys(priv);
-
-	if (priv->wep_restrict)
-		auth_flag = HERMES_AUTH_SHARED_KEY;
-	else
-		auth_flag = HERMES_AUTH_OPEN;
-
-	if (priv->wpa_enabled)
-		enc_flag = 2;
-	else if (priv->encode_alg == ORINOCO_ALG_WEP)
-		enc_flag = 1;
-	else
-		enc_flag = 0;
-
-	switch (priv->firmware_type) {
-	case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
-		if (priv->encode_alg == ORINOCO_ALG_WEP) {
-			/* Enable the shared-key authentication. */
-			err = hermes_write_wordrec(hw, USER_BAP,
-					HERMES_RID_CNFAUTHENTICATION_AGERE,
-					auth_flag);
-			if (err)
-				return err;
-		}
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFWEPENABLED_AGERE,
-					   enc_flag);
-		if (err)
-			return err;
-
-		if (priv->has_wpa) {
-			/* Set WPA key management */
-			err = hermes_write_wordrec(hw, USER_BAP,
-				  HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE,
-				  priv->key_mgmt);
-			if (err)
-				return err;
-		}
-
-		break;
-
-	case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
-	case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
-		if (priv->encode_alg == ORINOCO_ALG_WEP) {
-			if (priv->wep_restrict ||
-			    (priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
-				master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
-						  HERMES_WEP_EXCL_UNENCRYPTED;
-			else
-				master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;
-
-			err = hermes_write_wordrec(hw, USER_BAP,
-						   HERMES_RID_CNFAUTHENTICATION,
-						   auth_flag);
-			if (err)
-				return err;
-		} else
-			master_wep_flag = 0;
-
-		if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
-			master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
-
-		/* Master WEP setting : on/off */
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFWEPFLAGS_INTERSIL,
-					   master_wep_flag);
-		if (err)
-			return err;
-
-		break;
-	}
-
-	return 0;
-}
-
-/* key must be 32 bytes, including the tx and rx MIC keys.
- * rsc must be NULL or up to 8 bytes
- * tsc must be NULL or up to 8 bytes
- */
-int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx,
-			      int set_tx, const u8 *key, size_t key_len,
-			      const u8 *rsc, size_t rsc_len,
-			      const u8 *tsc, size_t tsc_len)
-{
-	struct {
-		__le16 idx;
-		u8 rsc[ORINOCO_SEQ_LEN];
-		struct {
-			u8 key[TKIP_KEYLEN];
-			u8 tx_mic[MIC_KEYLEN];
-			u8 rx_mic[MIC_KEYLEN];
-		} tkip;
-		u8 tsc[ORINOCO_SEQ_LEN];
-	} __packed buf;
-	struct hermes *hw = &priv->hw;
-	int ret;
-	int err;
-	int k;
-	u16 xmitting;
-
-	key_idx &= 0x3;
-
-	if (set_tx)
-		key_idx |= 0x8000;
-
-	buf.idx = cpu_to_le16(key_idx);
-	if (key_len != sizeof(buf.tkip))
-		return -EINVAL;
-	memcpy(&buf.tkip, key, sizeof(buf.tkip));
-
-	if (rsc_len > sizeof(buf.rsc))
-		rsc_len = sizeof(buf.rsc);
-
-	if (tsc_len > sizeof(buf.tsc))
-		tsc_len = sizeof(buf.tsc);
-
-	memset(buf.rsc, 0, sizeof(buf.rsc));
-	memset(buf.tsc, 0, sizeof(buf.tsc));
-
-	if (rsc != NULL)
-		memcpy(buf.rsc, rsc, rsc_len);
-
-	if (tsc != NULL)
-		memcpy(buf.tsc, tsc, tsc_len);
-	else
-		buf.tsc[4] = 0x10;
-
-	/* Wait up to 100ms for tx queue to empty */
-	for (k = 100; k > 0; k--) {
-		udelay(1000);
-		ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
-					  &xmitting);
-		if (ret || !xmitting)
-			break;
-	}
-
-	if (k == 0)
-		ret = -ETIMEDOUT;
-
-	err = HERMES_WRITE_RECORD(hw, USER_BAP,
-				  HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE,
-				  &buf);
-
-	return ret ? ret : err;
-}
-
-int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx)
-{
-	struct hermes *hw = &priv->hw;
-	int err;
-
-	err = hermes_write_wordrec(hw, USER_BAP,
-				   HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE,
-				   key_idx);
-	if (err)
-		printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n",
-		       priv->ndev->name, err, key_idx);
-	return err;
-}
-
-int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
-				    struct net_device *dev,
-				    int mc_count, int promisc)
-{
-	struct hermes *hw = &priv->hw;
-	int err = 0;
-
-	if (promisc != priv->promiscuous) {
-		err = hermes_write_wordrec(hw, USER_BAP,
-					   HERMES_RID_CNFPROMISCUOUSMODE,
-					   promisc);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
-			       priv->ndev->name, err);
-		} else
-			priv->promiscuous = promisc;
-	}
-
-	/* If we're not in promiscuous mode, then we need to set the
-	 * group address if either we want to multicast, or if we were
-	 * multicasting and want to stop */
-	if (!promisc && (mc_count || priv->mc_count)) {
-		struct netdev_hw_addr *ha;
-		struct hermes_multicast mclist;
-		int i = 0;
-
-		netdev_for_each_mc_addr(ha, dev) {
-			if (i == mc_count)
-				break;
-			memcpy(mclist.addr[i++], ha->addr, ETH_ALEN);
-		}
-
-		err = hw->ops->write_ltv(hw, USER_BAP,
-				   HERMES_RID_CNFGROUPADDRESSES,
-				   HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
-				   &mclist);
-		if (err)
-			printk(KERN_ERR "%s: Error %d setting multicast list.\n",
-			       priv->ndev->name, err);
-		else
-			priv->mc_count = mc_count;
-	}
-	return err;
-}
-
-/* Return : < 0 -> error code ; >= 0 -> length */
-int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
-			 char buf[IW_ESSID_MAX_SIZE + 1])
-{
-	struct hermes *hw = &priv->hw;
-	int err = 0;
-	struct hermes_idstring essidbuf;
-	char *p = (char *)(&essidbuf.val);
-	int len;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	if (strlen(priv->desired_essid) > 0) {
-		/* We read the desired SSID from the hardware rather
-		   than from priv->desired_essid, just in case the
-		   firmware is allowed to change it on us. I'm not
-		   sure about this */
-		/* My guess is that the OWNSSID should always be whatever
-		 * we set to the card, whereas CURRENT_SSID is the one that
-		 * may change... - Jean II */
-		u16 rid;
-
-		*active = 1;
-
-		rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
-			HERMES_RID_CNFDESIREDSSID;
-
-		err = hw->ops->read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
-					NULL, &essidbuf);
-		if (err)
-			goto fail_unlock;
-	} else {
-		*active = 0;
-
-		err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
-					sizeof(essidbuf), NULL, &essidbuf);
-		if (err)
-			goto fail_unlock;
-	}
-
-	len = le16_to_cpu(essidbuf.len);
-	BUG_ON(len > IW_ESSID_MAX_SIZE);
-
-	memset(buf, 0, IW_ESSID_MAX_SIZE);
-	memcpy(buf, p, len);
-	err = len;
-
- fail_unlock:
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-int orinoco_hw_get_freq(struct orinoco_private *priv)
-{
-	struct hermes *hw = &priv->hw;
-	int err = 0;
-	u16 channel;
-	int freq = 0;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL,
-				  &channel);
-	if (err)
-		goto out;
-
-	/* Intersil firmware 1.3.5 returns 0 when the interface is down */
-	if (channel == 0) {
-		err = -EBUSY;
-		goto out;
-	}
-
-	if ((channel < 1) || (channel > NUM_CHANNELS)) {
-		printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
-		       priv->ndev->name, channel);
-		err = -EBUSY;
-		goto out;
-
-	}
-	freq = ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ);
-
- out:
-	orinoco_unlock(priv, &flags);
-
-	if (err > 0)
-		err = -EBUSY;
-	return err ? err : freq;
-}
-
-int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
-			       int *numrates, s32 *rates, int max)
-{
-	struct hermes *hw = &priv->hw;
-	struct hermes_idstring list;
-	unsigned char *p = (unsigned char *)&list.val;
-	int err = 0;
-	int num;
-	int i;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
-				sizeof(list), NULL, &list);
-	orinoco_unlock(priv, &flags);
-
-	if (err)
-		return err;
-
-	num = le16_to_cpu(list.len);
-	*numrates = num;
-	num = min(num, max);
-
-	for (i = 0; i < num; i++)
-		rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
-
-	return 0;
-}
-
-int orinoco_hw_trigger_scan(struct orinoco_private *priv,
-			    const struct cfg80211_ssid *ssid)
-{
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	unsigned long flags;
-	int err = 0;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	/* Scanning with port 0 disabled would fail */
-	if (!netif_running(dev)) {
-		err = -ENETDOWN;
-		goto out;
-	}
-
-	/* In monitor mode, the scan results are always empty.
-	 * Probe responses are passed to the driver as received
-	 * frames and could be processed in software. */
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
-		err = -EOPNOTSUPP;
-		goto out;
-	}
-
-	if (priv->has_hostscan) {
-		switch (priv->firmware_type) {
-		case FIRMWARE_TYPE_SYMBOL:
-			err = hermes_write_wordrec(hw, USER_BAP,
-						HERMES_RID_CNFHOSTSCAN_SYMBOL,
-						HERMES_HOSTSCAN_SYMBOL_ONCE |
-						HERMES_HOSTSCAN_SYMBOL_BCAST);
-			break;
-		case FIRMWARE_TYPE_INTERSIL: {
-			__le16 req[3];
-
-			req[0] = cpu_to_le16(0x3fff);	/* All channels */
-			req[1] = cpu_to_le16(0x0001);	/* rate 1 Mbps */
-			req[2] = 0;			/* Any ESSID */
-			err = HERMES_WRITE_RECORD(hw, USER_BAP,
-						  HERMES_RID_CNFHOSTSCAN, &req);
-			break;
-		}
-		case FIRMWARE_TYPE_AGERE:
-			if (ssid->ssid_len > 0) {
-				struct hermes_idstring idbuf;
-				size_t len = ssid->ssid_len;
-
-				idbuf.len = cpu_to_le16(len);
-				memcpy(idbuf.val, ssid->ssid, len);
-
-				err = hw->ops->write_ltv(hw, USER_BAP,
-					       HERMES_RID_CNFSCANSSID_AGERE,
-					       HERMES_BYTES_TO_RECLEN(len + 2),
-					       &idbuf);
-			} else
-				err = hermes_write_wordrec(hw, USER_BAP,
-						   HERMES_RID_CNFSCANSSID_AGERE,
-						   0);	/* Any ESSID */
-			if (err)
-				break;
-
-			if (priv->has_ext_scan) {
-				err = hermes_write_wordrec(hw, USER_BAP,
-						HERMES_RID_CNFSCANCHANNELS2GHZ,
-						0x7FFF);
-				if (err)
-					goto out;
-
-				err = hermes_inquire(hw,
-						     HERMES_INQ_CHANNELINFO);
-			} else
-				err = hermes_inquire(hw, HERMES_INQ_SCAN);
-
-			break;
-		}
-	} else
-		err = hermes_inquire(hw, HERMES_INQ_SCAN);
-
- out:
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-/* Disassociate from node with BSSID addr */
-int orinoco_hw_disassociate(struct orinoco_private *priv,
-			    u8 *addr, u16 reason_code)
-{
-	struct hermes *hw = &priv->hw;
-	int err;
-
-	struct {
-		u8 addr[ETH_ALEN];
-		__le16 reason_code;
-	} __packed buf;
-
-	/* Currently only supported by WPA enabled Agere fw */
-	if (!priv->has_wpa)
-		return -EOPNOTSUPP;
-
-	memcpy(buf.addr, addr, ETH_ALEN);
-	buf.reason_code = cpu_to_le16(reason_code);
-	err = HERMES_WRITE_RECORD(hw, USER_BAP,
-				  HERMES_RID_CNFDISASSOCIATE,
-				  &buf);
-	return err;
-}
-
-int orinoco_hw_get_current_bssid(struct orinoco_private *priv,
-				 u8 *addr)
-{
-	struct hermes *hw = &priv->hw;
-	int err;
-
-	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
-				ETH_ALEN, NULL, addr);
-
-	return err;
-}
diff --git a/drivers/net/wireless/intersil/orinoco/hw.h b/drivers/net/wireless/intersil/orinoco/hw.h
deleted file mode 100644
index da5804dbdf..0000000000
--- a/drivers/net/wireless/intersil/orinoco/hw.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Encapsulate basic setting changes on Hermes hardware
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_HW_H_
-#define _ORINOCO_HW_H_
-
-#include <linux/types.h>
-#include <linux/wireless.h>
-#include <net/cfg80211.h>
-
-/* Hardware BAPs */
-#define USER_BAP 0
-#define IRQ_BAP  1
-
-/* WEP key sizes */
-#define SMALL_KEY_SIZE 5
-#define LARGE_KEY_SIZE 13
-
-/* Number of supported channels */
-#define NUM_CHANNELS 14
-
-/* Forward declarations */
-struct orinoco_private;
-
-int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name,
-			      size_t fw_name_len, u32 *hw_ver);
-int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr);
-int orinoco_hw_allocate_fid(struct orinoco_private *priv);
-int orinoco_get_bitratemode(int bitrate, int automatic);
-void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic);
-
-int orinoco_hw_program_rids(struct orinoco_private *priv);
-int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc);
-int __orinoco_hw_set_bitrate(struct orinoco_private *priv);
-int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate);
-int __orinoco_hw_set_wap(struct orinoco_private *priv);
-int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv);
-int __orinoco_hw_setup_enc(struct orinoco_private *priv);
-int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx,
-			      int set_tx, const u8 *key, size_t key_len,
-			      const u8 *rsc, size_t rsc_len,
-			      const u8 *tsc, size_t tsc_len);
-int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx);
-int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
-				    struct net_device *dev,
-				    int mc_count, int promisc);
-int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
-			 char buf[IW_ESSID_MAX_SIZE + 1]);
-int orinoco_hw_get_freq(struct orinoco_private *priv);
-int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
-			       int *numrates, s32 *rates, int max);
-int orinoco_hw_trigger_scan(struct orinoco_private *priv,
-			    const struct cfg80211_ssid *ssid);
-int orinoco_hw_disassociate(struct orinoco_private *priv,
-			    u8 *addr, u16 reason_code);
-int orinoco_hw_get_current_bssid(struct orinoco_private *priv,
-				 u8 *addr);
-
-#endif /* _ORINOCO_HW_H_ */
diff --git a/drivers/net/wireless/intersil/orinoco/main.c b/drivers/net/wireless/intersil/orinoco/main.c
deleted file mode 100644
index 7df88d20ff..0000000000
--- a/drivers/net/wireless/intersil/orinoco/main.c
+++ /dev/null
@@ -1,2414 +0,0 @@
-/* main.c - (formerly known as dldwd_cs.c, orinoco_cs.c and orinoco.c)
- *
- * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
- * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
- *
- * Current maintainers (as of 29 September 2003) are:
- *	Pavel Roskin <proski AT gnu.org>
- * and	David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * (C) Copyright David Gibson, IBM Corporation 2001-2003.
- * Copyright (C) 2000 David Gibson, Linuxcare Australia.
- *	With some help from :
- * Copyright (C) 2001 Jean Tourrilhes, HP Labs
- * Copyright (C) 2001 Benjamin Herrenschmidt
- *
- * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
- *
- * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
- * AT fasta.fh-dortmund.de>
- *      http://www.stud.fh-dortmund.de/~andy/wvlan/
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds AT users.sourceforge.net>.  Portions created by David
- * A. Hinds are Copyright (C) 1999 David A. Hinds.  All Rights
- * Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.  */
-
-/*
- * TODO
- *	o Handle de-encapsulation within network layer, provide 802.11
- *	  headers (patch from Thomas 'Dent' Mirlacher)
- *	o Fix possible races in SPY handling.
- *	o Disconnect wireless extensions from fundamental configuration.
- *	o (maybe) Software WEP support (patch from Stano Meduna).
- *	o (maybe) Use multiple Tx buffers - driver handling queue
- *	  rather than firmware.
- */
-
-/* Locking and synchronization:
- *
- * The basic principle is that everything is serialized through a
- * single spinlock, priv->lock.  The lock is used in user, bh and irq
- * context, so when taken outside hardirq context it should always be
- * taken with interrupts disabled.  The lock protects both the
- * hardware and the struct orinoco_private.
- *
- * Another flag, priv->hw_unavailable indicates that the hardware is
- * unavailable for an extended period of time (e.g. suspended, or in
- * the middle of a hard reset).  This flag is protected by the
- * spinlock.  All code which touches the hardware should check the
- * flag after taking the lock, and if it is set, give up on whatever
- * they are doing and drop the lock again.  The orinoco_lock()
- * function handles this (it unlocks and returns -EBUSY if
- * hw_unavailable is non-zero).
- */
-
-#define DRIVER_NAME "orinoco"
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/suspend.h>
-#include <linux/if_arp.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <net/iw_handler.h>
-#include <net/cfg80211.h>
-
-#include "hermes_rid.h"
-#include "hermes_dld.h"
-#include "hw.h"
-#include "scan.h"
-#include "mic.h"
-#include "fw.h"
-#include "wext.h"
-#include "cfg.h"
-#include "main.h"
-
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module information                                               */
-/********************************************************************/
-
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & "
-	      "David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based "
-		   "and similar wireless cards");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Level of debugging. Used in the macros in orinoco.h */
-#ifdef ORINOCO_DEBUG
-int orinoco_debug = ORINOCO_DEBUG;
-EXPORT_SYMBOL(orinoco_debug);
-module_param(orinoco_debug, int, 0644);
-MODULE_PARM_DESC(orinoco_debug, "Debug level");
-#endif
-
-static bool suppress_linkstatus; /* = 0 */
-module_param(suppress_linkstatus, bool, 0644);
-MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
-
-static int ignore_disconnect; /* = 0 */
-module_param(ignore_disconnect, int, 0644);
-MODULE_PARM_DESC(ignore_disconnect,
-		 "Don't report lost link to the network layer");
-
-int force_monitor; /* = 0 */
-module_param(force_monitor, int, 0644);
-MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions");
-
-/********************************************************************/
-/* Internal constants                                               */
-/********************************************************************/
-
-/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
-static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-#define ENCAPS_OVERHEAD		(sizeof(encaps_hdr) + 2)
-
-#define ORINOCO_MIN_MTU		256
-#define ORINOCO_MAX_MTU		(IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD)
-
-#define MAX_IRQLOOPS_PER_IRQ	10
-#define MAX_IRQLOOPS_PER_JIFFY	(20000 / HZ)	/* Based on a guestimate of
-						 * how many events the
-						 * device could
-						 * legitimately generate */
-
-#define DUMMY_FID		0xFFFF
-
-/*#define MAX_MULTICAST(priv)	(priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
-  HERMES_MAX_MULTICAST : 0)*/
-#define MAX_MULTICAST(priv)	(HERMES_MAX_MULTICAST)
-
-#define ORINOCO_INTEN		(HERMES_EV_RX | HERMES_EV_ALLOC \
-				 | HERMES_EV_TX | HERMES_EV_TXEXC \
-				 | HERMES_EV_WTERR | HERMES_EV_INFO \
-				 | HERMES_EV_INFDROP)
-
-/********************************************************************/
-/* Data types                                                       */
-/********************************************************************/
-
-/* Beginning of the Tx descriptor, used in TxExc handling */
-struct hermes_txexc_data {
-	struct hermes_tx_descriptor desc;
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-} __packed;
-
-/* Rx frame header except compatibility 802.3 header */
-struct hermes_rx_descriptor {
-	/* Control */
-	__le16 status;
-	__le32 time;
-	u8 silence;
-	u8 signal;
-	u8 rate;
-	u8 rxflow;
-	__le32 reserved;
-
-	/* 802.11 header */
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-
-	/* Data length */
-	__le16 data_len;
-} __packed;
-
-struct orinoco_rx_data {
-	struct hermes_rx_descriptor *desc;
-	struct sk_buff *skb;
-	struct list_head list;
-};
-
-struct orinoco_scan_data {
-	void *buf;
-	size_t len;
-	int type;
-	struct list_head list;
-};
-
-/********************************************************************/
-/* Function prototypes                                              */
-/********************************************************************/
-
-static int __orinoco_set_multicast_list(struct net_device *dev);
-static int __orinoco_up(struct orinoco_private *priv);
-static int __orinoco_down(struct orinoco_private *priv);
-static int __orinoco_commit(struct orinoco_private *priv);
-
-/********************************************************************/
-/* Internal helper functions                                        */
-/********************************************************************/
-
-void set_port_type(struct orinoco_private *priv)
-{
-	switch (priv->iw_mode) {
-	case NL80211_IFTYPE_STATION:
-		priv->port_type = 1;
-		priv->createibss = 0;
-		break;
-	case NL80211_IFTYPE_ADHOC:
-		if (priv->prefer_port3) {
-			priv->port_type = 3;
-			priv->createibss = 0;
-		} else {
-			priv->port_type = priv->ibss_port;
-			priv->createibss = 1;
-		}
-		break;
-	case NL80211_IFTYPE_MONITOR:
-		priv->port_type = 3;
-		priv->createibss = 0;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
-		       priv->ndev->name);
-	}
-}
-
-/********************************************************************/
-/* Device methods                                                   */
-/********************************************************************/
-
-int orinoco_open(struct net_device *dev)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	unsigned long flags;
-	int err;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	err = __orinoco_up(priv);
-
-	if (!err)
-		priv->open = 1;
-
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-EXPORT_SYMBOL(orinoco_open);
-
-int orinoco_stop(struct net_device *dev)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	int err = 0;
-
-	/* We mustn't use orinoco_lock() here, because we need to be
-	   able to close the interface even if hw_unavailable is set
-	   (e.g. as we're released after a PC Card removal) */
-	orinoco_lock_irq(priv);
-
-	priv->open = 0;
-
-	err = __orinoco_down(priv);
-
-	orinoco_unlock_irq(priv);
-
-	return err;
-}
-EXPORT_SYMBOL(orinoco_stop);
-
-void orinoco_set_multicast_list(struct net_device *dev)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0) {
-		printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
-		       "called when hw_unavailable\n", dev->name);
-		return;
-	}
-
-	__orinoco_set_multicast_list(dev);
-	orinoco_unlock(priv, &flags);
-}
-EXPORT_SYMBOL(orinoco_set_multicast_list);
-
-int orinoco_change_mtu(struct net_device *dev, int new_mtu)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-
-	/* MTU + encapsulation + header length */
-	if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
-	     (priv->nicbuf_size - ETH_HLEN))
-		return -EINVAL;
-
-	dev->mtu = new_mtu;
-
-	return 0;
-}
-EXPORT_SYMBOL(orinoco_change_mtu);
-
-/********************************************************************/
-/* Tx path                                                          */
-/********************************************************************/
-
-/* Add encapsulation and MIC to the existing SKB.
- * The main xmit routine will then send the whole lot to the card.
- * Need 8 bytes headroom
- * Need 8 bytes tailroom
- *
- *                          With encapsulated ethernet II frame
- *                          --------
- *                          803.3 header (14 bytes)
- *                           dst[6]
- * --------                  src[6]
- * 803.3 header (14 bytes)   len[2]
- *  dst[6]                  803.2 header (8 bytes)
- *  src[6]                   encaps[6]
- *  len[2] <- leave alone -> len[2]
- * --------                 -------- <-- 0
- * Payload                  Payload
- * ...                      ...
- *
- * --------                 --------
- *                          MIC (8 bytes)
- *                          --------
- *
- * returns 0 on success, -ENOMEM on error.
- */
-int orinoco_process_xmit_skb(struct sk_buff *skb,
-			     struct net_device *dev,
-			     struct orinoco_private *priv,
-			     int *tx_control,
-			     u8 *mic_buf)
-{
-	struct orinoco_tkip_key *key;
-	struct ethhdr *eh;
-	int do_mic;
-
-	key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
-
-	do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
-		  (key != NULL));
-
-	if (do_mic)
-		*tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
-			HERMES_TXCTRL_MIC;
-
-	eh = (struct ethhdr *)skb->data;
-
-	/* Encapsulate Ethernet-II frames */
-	if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
-		struct header_struct {
-			struct ethhdr eth;	/* 802.3 header */
-			u8 encap[6];		/* 802.2 header */
-		} __packed hdr;
-		int len = skb->len + sizeof(encaps_hdr) - (2 * ETH_ALEN);
-
-		if (skb_headroom(skb) < ENCAPS_OVERHEAD) {
-			if (net_ratelimit())
-				printk(KERN_ERR
-				       "%s: Not enough headroom for 802.2 headers %d\n",
-				       dev->name, skb_headroom(skb));
-			return -ENOMEM;
-		}
-
-		/* Fill in new header */
-		memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
-		hdr.eth.h_proto = htons(len);
-		memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
-
-		/* Make room for the new header, and copy it in */
-		eh = skb_push(skb, ENCAPS_OVERHEAD);
-		memcpy(eh, &hdr, sizeof(hdr));
-	}
-
-	/* Calculate Michael MIC */
-	if (do_mic) {
-		size_t len = skb->len - ETH_HLEN;
-		u8 *mic = &mic_buf[0];
-
-		/* Have to write to an even address, so copy the spare
-		 * byte across */
-		if (skb->len % 2) {
-			*mic = skb->data[skb->len - 1];
-			mic++;
-		}
-
-		orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
-			    eh->h_dest, eh->h_source, 0 /* priority */,
-			    skb->data + ETH_HLEN,
-			    len, mic);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(orinoco_process_xmit_skb);
-
-static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	struct hermes *hw = &priv->hw;
-	int err = 0;
-	u16 txfid = priv->txfid;
-	int tx_control;
-	unsigned long flags;
-	u8 mic_buf[MICHAEL_MIC_LEN + 1];
-
-	if (!netif_running(dev)) {
-		printk(KERN_ERR "%s: Tx on stopped device!\n",
-		       dev->name);
-		return NETDEV_TX_BUSY;
-	}
-
-	if (netif_queue_stopped(dev)) {
-		printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
-		       dev->name);
-		return NETDEV_TX_BUSY;
-	}
-
-	if (orinoco_lock(priv, &flags) != 0) {
-		printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
-		       dev->name);
-		return NETDEV_TX_BUSY;
-	}
-
-	if (!netif_carrier_ok(dev) ||
-	    (priv->iw_mode == NL80211_IFTYPE_MONITOR)) {
-		/* Oops, the firmware hasn't established a connection,
-		   silently drop the packet (this seems to be the
-		   safest approach). */
-		goto drop;
-	}
-
-	/* Check packet length */
-	if (skb->len < ETH_HLEN)
-		goto drop;
-
-	tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
-
-	err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
-				       &mic_buf[0]);
-	if (err)
-		goto drop;
-
-	if (priv->has_alt_txcntl) {
-		/* WPA enabled firmwares have tx_cntl at the end of
-		 * the 802.11 header.  So write zeroed descriptor and
-		 * 802.11 header at the same time
-		 */
-		char desc[HERMES_802_3_OFFSET];
-		__le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET];
-
-		memset(&desc, 0, sizeof(desc));
-
-		*txcntl = cpu_to_le16(tx_control);
-		err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
-					  txfid, 0);
-		if (err) {
-			if (net_ratelimit())
-				printk(KERN_ERR "%s: Error %d writing Tx "
-				       "descriptor to BAP\n", dev->name, err);
-			goto busy;
-		}
-	} else {
-		struct hermes_tx_descriptor desc;
-
-		memset(&desc, 0, sizeof(desc));
-
-		desc.tx_control = cpu_to_le16(tx_control);
-		err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
-					  txfid, 0);
-		if (err) {
-			if (net_ratelimit())
-				printk(KERN_ERR "%s: Error %d writing Tx "
-				       "descriptor to BAP\n", dev->name, err);
-			goto busy;
-		}
-
-		/* Clear the 802.11 header and data length fields - some
-		 * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
-		 * if this isn't done. */
-		hermes_clear_words(hw, HERMES_DATA0,
-				   HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
-	}
-
-	err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len,
-				  txfid, HERMES_802_3_OFFSET);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
-		       dev->name, err);
-		goto busy;
-	}
-
-	if (tx_control & HERMES_TXCTRL_MIC) {
-		size_t offset = HERMES_802_3_OFFSET + skb->len;
-		size_t len = MICHAEL_MIC_LEN;
-
-		if (offset % 2) {
-			offset--;
-			len++;
-		}
-		err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
-					  txfid, offset);
-		if (err) {
-			printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
-			       dev->name, err);
-			goto busy;
-		}
-	}
-
-	/* Finally, we actually initiate the send */
-	netif_stop_queue(dev);
-
-	err = hw->ops->cmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
-				txfid, NULL);
-	if (err) {
-		netif_start_queue(dev);
-		if (net_ratelimit())
-			printk(KERN_ERR "%s: Error %d transmitting packet\n",
-				dev->name, err);
-		goto busy;
-	}
-
-	stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
-	goto ok;
-
- drop:
-	stats->tx_errors++;
-	stats->tx_dropped++;
-
- ok:
-	orinoco_unlock(priv, &flags);
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-
- busy:
-	if (err == -EIO)
-		schedule_work(&priv->reset_work);
-	orinoco_unlock(priv, &flags);
-	return NETDEV_TX_BUSY;
-}
-
-static void __orinoco_ev_alloc(struct net_device *dev, struct hermes *hw)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	u16 fid = hermes_read_regn(hw, ALLOCFID);
-
-	if (fid != priv->txfid) {
-		if (fid != DUMMY_FID)
-			printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
-			       dev->name, fid);
-		return;
-	}
-
-	hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
-}
-
-static void __orinoco_ev_tx(struct net_device *dev, struct hermes *hw)
-{
-	dev->stats.tx_packets++;
-
-	netif_wake_queue(dev);
-
-	hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
-}
-
-static void __orinoco_ev_txexc(struct net_device *dev, struct hermes *hw)
-{
-	struct net_device_stats *stats = &dev->stats;
-	u16 fid = hermes_read_regn(hw, TXCOMPLFID);
-	u16 status;
-	struct hermes_txexc_data hdr;
-	int err = 0;
-
-	if (fid == DUMMY_FID)
-		return; /* Nothing's really happened */
-
-	/* Read part of the frame header - we need status and addr1 */
-	err = hw->ops->bap_pread(hw, IRQ_BAP, &hdr,
-				 sizeof(struct hermes_txexc_data),
-				 fid, 0);
-
-	hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
-	stats->tx_errors++;
-
-	if (err) {
-		printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
-		       "(FID=%04X error %d)\n",
-		       dev->name, fid, err);
-		return;
-	}
-
-	DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name,
-	      err, fid);
-
-	/* We produce a TXDROP event only for retry or lifetime
-	 * exceeded, because that's the only status that really mean
-	 * that this particular node went away.
-	 * Other errors means that *we* screwed up. - Jean II */
-	status = le16_to_cpu(hdr.desc.status);
-	if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
-		union iwreq_data	wrqu;
-
-		/* Copy 802.11 dest address.
-		 * We use the 802.11 header because the frame may
-		 * not be 802.3 or may be mangled...
-		 * In Ad-Hoc mode, it will be the node address.
-		 * In managed mode, it will be most likely the AP addr
-		 * User space will figure out how to convert it to
-		 * whatever it needs (IP address or else).
-		 * - Jean II */
-		memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN);
-		wrqu.addr.sa_family = ARPHRD_ETHER;
-
-		/* Send event to user space */
-		wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
-	}
-
-	netif_wake_queue(dev);
-}
-
-void orinoco_tx_timeout(struct net_device *dev, unsigned int txqueue)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	struct hermes *hw = &priv->hw;
-
-	printk(KERN_WARNING "%s: Tx timeout! "
-	       "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
-	       dev->name, hermes_read_regn(hw, ALLOCFID),
-	       hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
-
-	stats->tx_errors++;
-
-	schedule_work(&priv->reset_work);
-}
-EXPORT_SYMBOL(orinoco_tx_timeout);
-
-/********************************************************************/
-/* Rx path (data frames)                                            */
-/********************************************************************/
-
-/* Does the frame have a SNAP header indicating it should be
- * de-encapsulated to Ethernet-II? */
-static inline int is_ethersnap(void *_hdr)
-{
-	u8 *hdr = _hdr;
-
-	/* We de-encapsulate all packets which, a) have SNAP headers
-	 * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
-	 * and where b) the OUI of the SNAP header is 00:00:00 or
-	 * 00:00:f8 - we need both because different APs appear to use
-	 * different OUIs for some reason */
-	return (memcmp(hdr, &encaps_hdr, 5) == 0)
-		&& ((hdr[5] == 0x00) || (hdr[5] == 0xf8));
-}
-
-static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
-				      int level, int noise)
-{
-	struct iw_quality wstats;
-	wstats.level = level - 0x95;
-	wstats.noise = noise - 0x95;
-	wstats.qual = (level > noise) ? (level - noise) : 0;
-	wstats.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
-	/* Update spy records */
-	wireless_spy_update(dev, mac, &wstats);
-}
-
-static void orinoco_stat_gather(struct net_device *dev,
-				struct sk_buff *skb,
-				struct hermes_rx_descriptor *desc)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-
-	/* Using spy support with lots of Rx packets, like in an
-	 * infrastructure (AP), will really slow down everything, because
-	 * the MAC address must be compared to each entry of the spy list.
-	 * If the user really asks for it (set some address in the
-	 * spy list), we do it, but he will pay the price.
-	 * Note that to get here, you need both WIRELESS_SPY
-	 * compiled in AND some addresses in the list !!!
-	 */
-	/* Note : gcc will optimise the whole section away if
-	 * WIRELESS_SPY is not defined... - Jean II */
-	if (SPY_NUMBER(priv)) {
-		orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN,
-				   desc->signal, desc->silence);
-	}
-}
-
-/*
- * orinoco_rx_monitor - handle received monitor frames.
- *
- * Arguments:
- *	dev		network device
- *	rxfid		received FID
- *	desc		rx descriptor of the frame
- *
- * Call context: interrupt
- */
-static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
-			       struct hermes_rx_descriptor *desc)
-{
-	u32 hdrlen = 30;	/* return full header by default */
-	u32 datalen = 0;
-	u16 fc;
-	int err;
-	int len;
-	struct sk_buff *skb;
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	struct hermes *hw = &priv->hw;
-
-	len = le16_to_cpu(desc->data_len);
-
-	/* Determine the size of the header and the data */
-	fc = le16_to_cpu(desc->frame_ctl);
-	switch (fc & IEEE80211_FCTL_FTYPE) {
-	case IEEE80211_FTYPE_DATA:
-		if ((fc & IEEE80211_FCTL_TODS)
-		    && (fc & IEEE80211_FCTL_FROMDS))
-			hdrlen = 30;
-		else
-			hdrlen = 24;
-		datalen = len;
-		break;
-	case IEEE80211_FTYPE_MGMT:
-		hdrlen = 24;
-		datalen = len;
-		break;
-	case IEEE80211_FTYPE_CTL:
-		switch (fc & IEEE80211_FCTL_STYPE) {
-		case IEEE80211_STYPE_PSPOLL:
-		case IEEE80211_STYPE_RTS:
-		case IEEE80211_STYPE_CFEND:
-		case IEEE80211_STYPE_CFENDACK:
-			hdrlen = 16;
-			break;
-		case IEEE80211_STYPE_CTS:
-		case IEEE80211_STYPE_ACK:
-			hdrlen = 10;
-			break;
-		}
-		break;
-	default:
-		/* Unknown frame type */
-		break;
-	}
-
-	/* sanity check the length */
-	if (datalen > IEEE80211_MAX_DATA_LEN + 12) {
-		printk(KERN_DEBUG "%s: oversized monitor frame, "
-		       "data length = %d\n", dev->name, datalen);
-		stats->rx_length_errors++;
-		goto update_stats;
-	}
-
-	skb = dev_alloc_skb(hdrlen + datalen);
-	if (!skb) {
-		printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
-		       dev->name);
-		goto update_stats;
-	}
-
-	/* Copy the 802.11 header to the skb */
-	skb_put_data(skb, &(desc->frame_ctl), hdrlen);
-	skb_reset_mac_header(skb);
-
-	/* If any, copy the data from the card to the skb */
-	if (datalen > 0) {
-		err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
-					 ALIGN(datalen, 2), rxfid,
-					 HERMES_802_2_OFFSET);
-		if (err) {
-			printk(KERN_ERR "%s: error %d reading monitor frame\n",
-			       dev->name, err);
-			goto drop;
-		}
-	}
-
-	skb->dev = dev;
-	skb->ip_summed = CHECKSUM_NONE;
-	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = cpu_to_be16(ETH_P_802_2);
-
-	stats->rx_packets++;
-	stats->rx_bytes += skb->len;
-
-	netif_rx(skb);
-	return;
-
- drop:
-	dev_kfree_skb_irq(skb);
- update_stats:
-	stats->rx_errors++;
-	stats->rx_dropped++;
-}
-
-void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	struct iw_statistics *wstats = &priv->wstats;
-	struct sk_buff *skb = NULL;
-	u16 rxfid, status;
-	int length;
-	struct hermes_rx_descriptor *desc;
-	struct orinoco_rx_data *rx_data;
-	int err;
-
-	desc = kmalloc(sizeof(*desc), GFP_ATOMIC);
-	if (!desc)
-		goto update_stats;
-
-	rxfid = hermes_read_regn(hw, RXFID);
-
-	err = hw->ops->bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
-				 rxfid, 0);
-	if (err) {
-		printk(KERN_ERR "%s: error %d reading Rx descriptor. "
-		       "Frame dropped.\n", dev->name, err);
-		goto update_stats;
-	}
-
-	status = le16_to_cpu(desc->status);
-
-	if (status & HERMES_RXSTAT_BADCRC) {
-		DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
-		      dev->name);
-		stats->rx_crc_errors++;
-		goto update_stats;
-	}
-
-	/* Handle frames in monitor mode */
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
-		orinoco_rx_monitor(dev, rxfid, desc);
-		goto out;
-	}
-
-	if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
-		DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
-		      dev->name);
-		wstats->discard.code++;
-		goto update_stats;
-	}
-
-	length = le16_to_cpu(desc->data_len);
-
-	/* Sanity checks */
-	if (length < 3) { /* No for even an 802.2 LLC header */
-		/* At least on Symbol firmware with PCF we get quite a
-		   lot of these legitimately - Poll frames with no
-		   data. */
-		goto out;
-	}
-	if (length > IEEE80211_MAX_DATA_LEN) {
-		printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
-		       dev->name, length);
-		stats->rx_length_errors++;
-		goto update_stats;
-	}
-
-	/* Payload size does not include Michael MIC. Increase payload
-	 * size to read it together with the data. */
-	if (status & HERMES_RXSTAT_MIC)
-		length += MICHAEL_MIC_LEN;
-
-	/* We need space for the packet data itself, plus an ethernet
-	   header, plus 2 bytes so we can align the IP header on a
-	   32bit boundary, plus 1 byte so we can read in odd length
-	   packets from the card, which has an IO granularity of 16
-	   bits */
-	skb = dev_alloc_skb(length + ETH_HLEN + 2 + 1);
-	if (!skb) {
-		printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
-		       dev->name);
-		goto update_stats;
-	}
-
-	/* We'll prepend the header, so reserve space for it.  The worst
-	   case is no decapsulation, when 802.3 header is prepended and
-	   nothing is removed.  2 is for aligning the IP header.  */
-	skb_reserve(skb, ETH_HLEN + 2);
-
-	err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, length),
-				 ALIGN(length, 2), rxfid,
-				 HERMES_802_2_OFFSET);
-	if (err) {
-		printk(KERN_ERR "%s: error %d reading frame. "
-		       "Frame dropped.\n", dev->name, err);
-		goto drop;
-	}
-
-	/* Add desc and skb to rx queue */
-	rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC);
-	if (!rx_data)
-		goto drop;
-
-	rx_data->desc = desc;
-	rx_data->skb = skb;
-	list_add_tail(&rx_data->list, &priv->rx_list);
-	tasklet_schedule(&priv->rx_tasklet);
-
-	return;
-
-drop:
-	dev_kfree_skb_irq(skb);
-update_stats:
-	stats->rx_errors++;
-	stats->rx_dropped++;
-out:
-	kfree(desc);
-}
-EXPORT_SYMBOL(__orinoco_ev_rx);
-
-static void orinoco_rx(struct net_device *dev,
-		       struct hermes_rx_descriptor *desc,
-		       struct sk_buff *skb)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	u16 status, fc;
-	int length;
-	struct ethhdr *hdr;
-
-	status = le16_to_cpu(desc->status);
-	length = le16_to_cpu(desc->data_len);
-	fc = le16_to_cpu(desc->frame_ctl);
-
-	/* Calculate and check MIC */
-	if (status & HERMES_RXSTAT_MIC) {
-		struct orinoco_tkip_key *key;
-		int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >>
-			      HERMES_MIC_KEY_ID_SHIFT);
-		u8 mic[MICHAEL_MIC_LEN];
-		u8 *rxmic;
-		u8 *src = (fc & IEEE80211_FCTL_FROMDS) ?
-			desc->addr3 : desc->addr2;
-
-		/* Extract Michael MIC from payload */
-		rxmic = skb->data + skb->len - MICHAEL_MIC_LEN;
-
-		skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
-		length -= MICHAEL_MIC_LEN;
-
-		key = (struct orinoco_tkip_key *) priv->keys[key_id].key;
-
-		if (!key) {
-			printk(KERN_WARNING "%s: Received encrypted frame from "
-			       "%pM using key %i, but key is not installed\n",
-			       dev->name, src, key_id);
-			goto drop;
-		}
-
-		orinoco_mic(priv->rx_tfm_mic, key->rx_mic, desc->addr1, src,
-			    0, /* priority or QoS? */
-			    skb->data, skb->len, &mic[0]);
-
-		if (memcmp(mic, rxmic,
-			   MICHAEL_MIC_LEN)) {
-			union iwreq_data wrqu;
-			struct iw_michaelmicfailure wxmic;
-
-			printk(KERN_WARNING "%s: "
-			       "Invalid Michael MIC in data frame from %pM, "
-			       "using key %i\n",
-			       dev->name, src, key_id);
-
-			/* TODO: update stats */
-
-			/* Notify userspace */
-			memset(&wxmic, 0, sizeof(wxmic));
-			wxmic.flags = key_id & IW_MICFAILURE_KEY_ID;
-			wxmic.flags |= (desc->addr1[0] & 1) ?
-				IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE;
-			wxmic.src_addr.sa_family = ARPHRD_ETHER;
-			memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN);
-
-			(void) orinoco_hw_get_tkip_iv(priv, key_id,
-						      &wxmic.tsc[0]);
-
-			memset(&wrqu, 0, sizeof(wrqu));
-			wrqu.data.length = sizeof(wxmic);
-			wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu,
-					    (char *) &wxmic);
-
-			goto drop;
-		}
-	}
-
-	/* Handle decapsulation
-	 * In most cases, the firmware tell us about SNAP frames.
-	 * For some reason, the SNAP frames sent by LinkSys APs
-	 * are not properly recognised by most firmwares.
-	 * So, check ourselves */
-	if (length >= ENCAPS_OVERHEAD &&
-	    (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
-	     ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
-	     is_ethersnap(skb->data))) {
-		/* These indicate a SNAP within 802.2 LLC within
-		   802.11 frame which we'll need to de-encapsulate to
-		   the original EthernetII frame. */
-		hdr = skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD);
-	} else {
-		/* 802.3 frame - prepend 802.3 header as is */
-		hdr = skb_push(skb, ETH_HLEN);
-		hdr->h_proto = htons(length);
-	}
-	memcpy(hdr->h_dest, desc->addr1, ETH_ALEN);
-	if (fc & IEEE80211_FCTL_FROMDS)
-		memcpy(hdr->h_source, desc->addr3, ETH_ALEN);
-	else
-		memcpy(hdr->h_source, desc->addr2, ETH_ALEN);
-
-	skb->protocol = eth_type_trans(skb, dev);
-	skb->ip_summed = CHECKSUM_NONE;
-	if (fc & IEEE80211_FCTL_TODS)
-		skb->pkt_type = PACKET_OTHERHOST;
-
-	/* Process the wireless stats if needed */
-	orinoco_stat_gather(dev, skb, desc);
-
-	/* Pass the packet to the networking stack */
-	netif_rx(skb);
-	stats->rx_packets++;
-	stats->rx_bytes += length;
-
-	return;
-
- drop:
-	dev_kfree_skb(skb);
-	stats->rx_errors++;
-	stats->rx_dropped++;
-}
-
-static void orinoco_rx_isr_tasklet(struct tasklet_struct *t)
-{
-	struct orinoco_private *priv = from_tasklet(priv, t, rx_tasklet);
-	struct net_device *dev = priv->ndev;
-	struct orinoco_rx_data *rx_data, *temp;
-	struct hermes_rx_descriptor *desc;
-	struct sk_buff *skb;
-	unsigned long flags;
-
-	/* orinoco_rx requires the driver lock, and we also need to
-	 * protect priv->rx_list, so just hold the lock over the
-	 * lot.
-	 *
-	 * If orinoco_lock fails, we've unplugged the card. In this
-	 * case just abort. */
-	if (orinoco_lock(priv, &flags) != 0)
-		return;
-
-	/* extract desc and skb from queue */
-	list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
-		desc = rx_data->desc;
-		skb = rx_data->skb;
-		list_del(&rx_data->list);
-		kfree(rx_data);
-
-		orinoco_rx(dev, desc, skb);
-
-		kfree(desc);
-	}
-
-	orinoco_unlock(priv, &flags);
-}
-
-/********************************************************************/
-/* Rx path (info frames)                                            */
-/********************************************************************/
-
-static void print_linkstatus(struct net_device *dev, u16 status)
-{
-	char *s;
-
-	if (suppress_linkstatus)
-		return;
-
-	switch (status) {
-	case HERMES_LINKSTATUS_NOT_CONNECTED:
-		s = "Not Connected";
-		break;
-	case HERMES_LINKSTATUS_CONNECTED:
-		s = "Connected";
-		break;
-	case HERMES_LINKSTATUS_DISCONNECTED:
-		s = "Disconnected";
-		break;
-	case HERMES_LINKSTATUS_AP_CHANGE:
-		s = "AP Changed";
-		break;
-	case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
-		s = "AP Out of Range";
-		break;
-	case HERMES_LINKSTATUS_AP_IN_RANGE:
-		s = "AP In Range";
-		break;
-	case HERMES_LINKSTATUS_ASSOC_FAILED:
-		s = "Association Failed";
-		break;
-	default:
-		s = "UNKNOWN";
-	}
-
-	printk(KERN_DEBUG "%s: New link status: %s (%04x)\n",
-	       dev->name, s, status);
-}
-
-/* Search scan results for requested BSSID, join it if found */
-static void orinoco_join_ap(struct work_struct *work)
-{
-	struct orinoco_private *priv =
-		container_of(work, struct orinoco_private, join_work);
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	int err;
-	unsigned long flags;
-	struct join_req {
-		u8 bssid[ETH_ALEN];
-		__le16 channel;
-	} __packed req;
-	const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
-	struct prism2_scan_apinfo *atom = NULL;
-	int offset = 4;
-	int found = 0;
-	u8 *buf;
-	u16 len;
-
-	/* Allocate buffer for scan results */
-	buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL);
-	if (!buf)
-		return;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		goto fail_lock;
-
-	/* Sanity checks in case user changed something in the meantime */
-	if (!priv->bssid_fixed)
-		goto out;
-
-	if (strlen(priv->desired_essid) == 0)
-		goto out;
-
-	/* Read scan results from the firmware */
-	err = hw->ops->read_ltv(hw, USER_BAP,
-				HERMES_RID_SCANRESULTSTABLE,
-				MAX_SCAN_LEN, &len, buf);
-	if (err) {
-		printk(KERN_ERR "%s: Cannot read scan results\n",
-		       dev->name);
-		goto out;
-	}
-
-	len = HERMES_RECLEN_TO_BYTES(len);
-
-	/* Go through the scan results looking for the channel of the AP
-	 * we were requested to join */
-	for (; offset + atom_len <= len; offset += atom_len) {
-		atom = (struct prism2_scan_apinfo *) (buf + offset);
-		if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (!found) {
-		DEBUG(1, "%s: Requested AP not found in scan results\n",
-		      dev->name);
-		goto out;
-	}
-
-	memcpy(req.bssid, priv->desired_bssid, ETH_ALEN);
-	req.channel = atom->channel;	/* both are little-endian */
-	err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST,
-				  &req);
-	if (err)
-		printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
-
- out:
-	orinoco_unlock(priv, &flags);
-
- fail_lock:
-	kfree(buf);
-}
-
-/* Send new BSSID to userspace */
-static void orinoco_send_bssid_wevent(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	union iwreq_data wrqu;
-	int err;
-
-	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
-				ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
-	if (err != 0)
-		return;
-
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-
-	/* Send event to user space */
-	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
-}
-
-static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	union iwreq_data wrqu;
-	int err;
-	u8 buf[88];
-	u8 *ie;
-
-	if (!priv->has_wpa)
-		return;
-
-	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
-				sizeof(buf), NULL, &buf);
-	if (err != 0)
-		return;
-
-	ie = orinoco_get_wpa_ie(buf, sizeof(buf));
-	if (ie) {
-		int rem = sizeof(buf) - (ie - &buf[0]);
-		wrqu.data.length = ie[1] + 2;
-		if (wrqu.data.length > rem)
-			wrqu.data.length = rem;
-
-		if (wrqu.data.length)
-			/* Send event to user space */
-			wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie);
-	}
-}
-
-static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	union iwreq_data wrqu;
-	int err;
-	u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */
-	u8 *ie;
-
-	if (!priv->has_wpa)
-		return;
-
-	err = hw->ops->read_ltv(hw, USER_BAP,
-				HERMES_RID_CURRENT_ASSOC_RESP_INFO,
-				sizeof(buf), NULL, &buf);
-	if (err != 0)
-		return;
-
-	ie = orinoco_get_wpa_ie(buf, sizeof(buf));
-	if (ie) {
-		int rem = sizeof(buf) - (ie - &buf[0]);
-		wrqu.data.length = ie[1] + 2;
-		if (wrqu.data.length > rem)
-			wrqu.data.length = rem;
-
-		if (wrqu.data.length)
-			/* Send event to user space */
-			wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie);
-	}
-}
-
-static void orinoco_send_wevents(struct work_struct *work)
-{
-	struct orinoco_private *priv =
-		container_of(work, struct orinoco_private, wevent_work);
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return;
-
-	orinoco_send_assocreqie_wevent(priv);
-	orinoco_send_assocrespie_wevent(priv);
-	orinoco_send_bssid_wevent(priv);
-
-	orinoco_unlock(priv, &flags);
-}
-
-static void qbuf_scan(struct orinoco_private *priv, void *buf,
-		      int len, int type)
-{
-	struct orinoco_scan_data *sd;
-	unsigned long flags;
-
-	sd = kmalloc(sizeof(*sd), GFP_ATOMIC);
-	if (!sd)
-		return;
-
-	sd->buf = buf;
-	sd->len = len;
-	sd->type = type;
-
-	spin_lock_irqsave(&priv->scan_lock, flags);
-	list_add_tail(&sd->list, &priv->scan_list);
-	spin_unlock_irqrestore(&priv->scan_lock, flags);
-
-	schedule_work(&priv->process_scan);
-}
-
-static void qabort_scan(struct orinoco_private *priv)
-{
-	struct orinoco_scan_data *sd;
-	unsigned long flags;
-
-	sd = kmalloc(sizeof(*sd), GFP_ATOMIC);
-	if (!sd)
-		return;
-
-	sd->len = -1; /* Abort */
-
-	spin_lock_irqsave(&priv->scan_lock, flags);
-	list_add_tail(&sd->list, &priv->scan_list);
-	spin_unlock_irqrestore(&priv->scan_lock, flags);
-
-	schedule_work(&priv->process_scan);
-}
-
-static void orinoco_process_scan_results(struct work_struct *work)
-{
-	struct orinoco_private *priv =
-		container_of(work, struct orinoco_private, process_scan);
-	struct orinoco_scan_data *sd, *temp;
-	unsigned long flags;
-	void *buf;
-	int len;
-	int type;
-
-	spin_lock_irqsave(&priv->scan_lock, flags);
-	list_for_each_entry_safe(sd, temp, &priv->scan_list, list) {
-
-		buf = sd->buf;
-		len = sd->len;
-		type = sd->type;
-
-		list_del(&sd->list);
-		spin_unlock_irqrestore(&priv->scan_lock, flags);
-		kfree(sd);
-
-		if (len > 0) {
-			if (type == HERMES_INQ_CHANNELINFO)
-				orinoco_add_extscan_result(priv, buf, len);
-			else
-				orinoco_add_hostscan_results(priv, buf, len);
-
-			kfree(buf);
-		} else {
-			/* Either abort or complete the scan */
-			orinoco_scan_done(priv, (len < 0));
-		}
-
-		spin_lock_irqsave(&priv->scan_lock, flags);
-	}
-	spin_unlock_irqrestore(&priv->scan_lock, flags);
-}
-
-void __orinoco_ev_info(struct net_device *dev, struct hermes *hw)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	u16 infofid;
-	struct {
-		__le16 len;
-		__le16 type;
-	} __packed info;
-	int len, type;
-	int err;
-
-	/* This is an answer to an INQUIRE command that we did earlier,
-	 * or an information "event" generated by the card
-	 * The controller return to us a pseudo frame containing
-	 * the information in question - Jean II */
-	infofid = hermes_read_regn(hw, INFOFID);
-
-	/* Read the info frame header - don't try too hard */
-	err = hw->ops->bap_pread(hw, IRQ_BAP, &info, sizeof(info),
-				 infofid, 0);
-	if (err) {
-		printk(KERN_ERR "%s: error %d reading info frame. "
-		       "Frame dropped.\n", dev->name, err);
-		return;
-	}
-
-	len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
-	type = le16_to_cpu(info.type);
-
-	switch (type) {
-	case HERMES_INQ_TALLIES: {
-		struct hermes_tallies_frame tallies;
-		struct iw_statistics *wstats = &priv->wstats;
-
-		if (len > sizeof(tallies)) {
-			printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
-			       dev->name, len);
-			len = sizeof(tallies);
-		}
-
-		err = hw->ops->bap_pread(hw, IRQ_BAP, &tallies, len,
-					 infofid, sizeof(info));
-		if (err)
-			break;
-
-		/* Increment our various counters */
-		/* wstats->discard.nwid - no wrong BSSID stuff */
-		wstats->discard.code +=
-			le16_to_cpu(tallies.RxWEPUndecryptable);
-		if (len == sizeof(tallies))
-			wstats->discard.code +=
-				le16_to_cpu(tallies.RxDiscards_WEPICVError) +
-				le16_to_cpu(tallies.RxDiscards_WEPExcluded);
-		wstats->discard.misc +=
-			le16_to_cpu(tallies.TxDiscardsWrongSA);
-		wstats->discard.fragment +=
-			le16_to_cpu(tallies.RxMsgInBadMsgFragments);
-		wstats->discard.retries +=
-			le16_to_cpu(tallies.TxRetryLimitExceeded);
-		/* wstats->miss.beacon - no match */
-	}
-	break;
-	case HERMES_INQ_LINKSTATUS: {
-		struct hermes_linkstatus linkstatus;
-		u16 newstatus;
-		int connected;
-
-		if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
-			break;
-
-		if (len != sizeof(linkstatus)) {
-			printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
-			       dev->name, len);
-			break;
-		}
-
-		err = hw->ops->bap_pread(hw, IRQ_BAP, &linkstatus, len,
-					 infofid, sizeof(info));
-		if (err)
-			break;
-		newstatus = le16_to_cpu(linkstatus.linkstatus);
-
-		/* Symbol firmware uses "out of range" to signal that
-		 * the hostscan frame can be requested.  */
-		if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
-		    priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
-		    priv->has_hostscan && priv->scan_request) {
-			hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
-			break;
-		}
-
-		connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
-			|| (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
-			|| (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
-
-		if (connected)
-			netif_carrier_on(dev);
-		else if (!ignore_disconnect)
-			netif_carrier_off(dev);
-
-		if (newstatus != priv->last_linkstatus) {
-			priv->last_linkstatus = newstatus;
-			print_linkstatus(dev, newstatus);
-			/* The info frame contains only one word which is the
-			 * status (see hermes.h). The status is pretty boring
-			 * in itself, that's why we export the new BSSID...
-			 * Jean II */
-			schedule_work(&priv->wevent_work);
-		}
-	}
-	break;
-	case HERMES_INQ_SCAN:
-		if (!priv->scan_request && priv->bssid_fixed &&
-		    priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
-			schedule_work(&priv->join_work);
-			break;
-		}
-		fallthrough;
-	case HERMES_INQ_HOSTSCAN:
-	case HERMES_INQ_HOSTSCAN_SYMBOL: {
-		/* Result of a scanning. Contains information about
-		 * cells in the vicinity - Jean II */
-		unsigned char *buf;
-
-		/* Sanity check */
-		if (len > 4096) {
-			printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
-			       dev->name, len);
-			qabort_scan(priv);
-			break;
-		}
-
-		/* Allocate buffer for results */
-		buf = kmalloc(len, GFP_ATOMIC);
-		if (buf == NULL) {
-			/* No memory, so can't printk()... */
-			qabort_scan(priv);
-			break;
-		}
-
-		/* Read scan data */
-		err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) buf, len,
-					 infofid, sizeof(info));
-		if (err) {
-			kfree(buf);
-			qabort_scan(priv);
-			break;
-		}
-
-#ifdef ORINOCO_DEBUG
-		{
-			int	i;
-			printk(KERN_DEBUG "Scan result [%02X", buf[0]);
-			for (i = 1; i < (len * 2); i++)
-				printk(":%02X", buf[i]);
-			printk("]\n");
-		}
-#endif	/* ORINOCO_DEBUG */
-
-		qbuf_scan(priv, buf, len, type);
-	}
-	break;
-	case HERMES_INQ_CHANNELINFO:
-	{
-		struct agere_ext_scan_info *bss;
-
-		if (!priv->scan_request) {
-			printk(KERN_DEBUG "%s: Got chaninfo without scan, "
-			       "len=%d\n", dev->name, len);
-			break;
-		}
-
-		/* An empty result indicates that the scan is complete */
-		if (len == 0) {
-			qbuf_scan(priv, NULL, len, type);
-			break;
-		}
-
-		/* Sanity check */
-		else if (len < (offsetof(struct agere_ext_scan_info,
-					   data) + 2)) {
-			/* Drop this result now so we don't have to
-			 * keep checking later */
-			printk(KERN_WARNING
-			       "%s: Ext scan results too short (%d bytes)\n",
-			       dev->name, len);
-			break;
-		}
-
-		bss = kmalloc(len, GFP_ATOMIC);
-		if (bss == NULL)
-			break;
-
-		/* Read scan data */
-		err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) bss, len,
-					 infofid, sizeof(info));
-		if (err)
-			kfree(bss);
-		else
-			qbuf_scan(priv, bss, len, type);
-
-		break;
-	}
-	case HERMES_INQ_SEC_STAT_AGERE:
-		/* Security status (Agere specific) */
-		/* Ignore this frame for now */
-		if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
-			break;
-		fallthrough;
-	default:
-		printk(KERN_DEBUG "%s: Unknown information frame received: "
-		       "type 0x%04x, length %d\n", dev->name, type, len);
-		/* We don't actually do anything about it */
-		break;
-	}
-}
-EXPORT_SYMBOL(__orinoco_ev_info);
-
-static void __orinoco_ev_infdrop(struct net_device *dev, struct hermes *hw)
-{
-	if (net_ratelimit())
-		printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
-}
-
-/********************************************************************/
-/* Internal hardware control routines                               */
-/********************************************************************/
-
-static int __orinoco_up(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	int err;
-
-	netif_carrier_off(dev); /* just to make sure */
-
-	err = __orinoco_commit(priv);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d configuring card\n",
-		       dev->name, err);
-		return err;
-	}
-
-	/* Fire things up again */
-	hermes_set_irqmask(hw, ORINOCO_INTEN);
-	err = hermes_enable_port(hw, 0);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d enabling MAC port\n",
-		       dev->name, err);
-		return err;
-	}
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-static int __orinoco_down(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	int err;
-
-	netif_stop_queue(dev);
-
-	if (!priv->hw_unavailable) {
-		if (!priv->broken_disableport) {
-			err = hermes_disable_port(hw, 0);
-			if (err) {
-				/* Some firmwares (e.g. Intersil 1.3.x) seem
-				 * to have problems disabling the port, oh
-				 * well, too bad. */
-				printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
-				       dev->name, err);
-				priv->broken_disableport = 1;
-			}
-		}
-		hermes_set_irqmask(hw, 0);
-		hermes_write_regn(hw, EVACK, 0xffff);
-	}
-
-	orinoco_scan_done(priv, true);
-
-	/* firmware will have to reassociate */
-	netif_carrier_off(dev);
-	priv->last_linkstatus = 0xffff;
-
-	return 0;
-}
-
-static int orinoco_reinit_firmware(struct orinoco_private *priv)
-{
-	struct hermes *hw = &priv->hw;
-	int err;
-
-	err = hw->ops->init(hw);
-	if (priv->do_fw_download && !err) {
-		err = orinoco_download(priv);
-		if (err)
-			priv->do_fw_download = 0;
-	}
-	if (!err)
-		err = orinoco_hw_allocate_fid(priv);
-
-	return err;
-}
-
-static int
-__orinoco_set_multicast_list(struct net_device *dev)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	int err = 0;
-	int promisc, mc_count;
-
-	/* The Hermes doesn't seem to have an allmulti mode, so we go
-	 * into promiscuous mode and let the upper levels deal. */
-	if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
-	    (netdev_mc_count(dev) > MAX_MULTICAST(priv))) {
-		promisc = 1;
-		mc_count = 0;
-	} else {
-		promisc = 0;
-		mc_count = netdev_mc_count(dev);
-	}
-
-	err = __orinoco_hw_set_multicast_list(priv, dev, mc_count, promisc);
-
-	return err;
-}
-
-/* This must be called from user context, without locks held - use
- * schedule_work() */
-void orinoco_reset(struct work_struct *work)
-{
-	struct orinoco_private *priv =
-		container_of(work, struct orinoco_private, reset_work);
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	int err;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		/* When the hardware becomes available again, whatever
-		 * detects that is responsible for re-initializing
-		 * it. So no need for anything further */
-		return;
-
-	netif_stop_queue(dev);
-
-	/* Shut off interrupts.  Depending on what state the hardware
-	 * is in, this might not work, but we'll try anyway */
-	hermes_set_irqmask(hw, 0);
-	hermes_write_regn(hw, EVACK, 0xffff);
-
-	priv->hw_unavailable++;
-	priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
-	netif_carrier_off(dev);
-
-	orinoco_unlock(priv, &flags);
-
-	/* Scanning support: Notify scan cancellation */
-	orinoco_scan_done(priv, true);
-
-	if (priv->hard_reset) {
-		err = (*priv->hard_reset)(priv);
-		if (err) {
-			printk(KERN_ERR "%s: orinoco_reset: Error %d "
-			       "performing hard reset\n", dev->name, err);
-			goto disable;
-		}
-	}
-
-	err = orinoco_reinit_firmware(priv);
-	if (err) {
-		printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
-		       dev->name, err);
-		goto disable;
-	}
-
-	/* This has to be called from user context */
-	orinoco_lock_irq(priv);
-
-	priv->hw_unavailable--;
-
-	/* priv->open or priv->hw_unavailable might have changed while
-	 * we dropped the lock */
-	if (priv->open && (!priv->hw_unavailable)) {
-		err = __orinoco_up(priv);
-		if (err) {
-			printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
-			       dev->name, err);
-		} else
-			netif_trans_update(dev);
-	}
-
-	orinoco_unlock_irq(priv);
-
-	return;
- disable:
-	hermes_set_irqmask(hw, 0);
-	netif_device_detach(dev);
-	printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
-}
-
-static int __orinoco_commit(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	int err = 0;
-
-	/* If we've called commit, we are reconfiguring or bringing the
-	 * interface up. Maintaining countermeasures across this would
-	 * be confusing, so note that we've disabled them. The port will
-	 * be enabled later in orinoco_commit or __orinoco_up. */
-	priv->tkip_cm_active = 0;
-
-	err = orinoco_hw_program_rids(priv);
-
-	/* FIXME: what about netif_tx_lock */
-	(void) __orinoco_set_multicast_list(dev);
-
-	return err;
-}
-
-/* Ensures configuration changes are applied. May result in a reset.
- * The caller should hold priv->lock
- */
-int orinoco_commit(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	int err;
-
-	if (priv->broken_disableport) {
-		schedule_work(&priv->reset_work);
-		return 0;
-	}
-
-	err = hermes_disable_port(hw, 0);
-	if (err) {
-		printk(KERN_WARNING "%s: Unable to disable port "
-		       "while reconfiguring card\n", dev->name);
-		priv->broken_disableport = 1;
-		goto out;
-	}
-
-	err = __orinoco_commit(priv);
-	if (err) {
-		printk(KERN_WARNING "%s: Unable to reconfigure card\n",
-		       dev->name);
-		goto out;
-	}
-
-	err = hermes_enable_port(hw, 0);
-	if (err) {
-		printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
-		       dev->name);
-		goto out;
-	}
-
- out:
-	if (err) {
-		printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
-		schedule_work(&priv->reset_work);
-		err = 0;
-	}
-	return err;
-}
-
-/********************************************************************/
-/* Interrupt handler                                                */
-/********************************************************************/
-
-static void __orinoco_ev_tick(struct net_device *dev, struct hermes *hw)
-{
-	printk(KERN_DEBUG "%s: TICK\n", dev->name);
-}
-
-static void __orinoco_ev_wterr(struct net_device *dev, struct hermes *hw)
-{
-	/* This seems to happen a fair bit under load, but ignoring it
-	   seems to work fine...*/
-	printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
-	       dev->name);
-}
-
-irqreturn_t orinoco_interrupt(int irq, void *dev_id)
-{
-	struct orinoco_private *priv = dev_id;
-	struct net_device *dev = priv->ndev;
-	struct hermes *hw = &priv->hw;
-	int count = MAX_IRQLOOPS_PER_IRQ;
-	u16 evstat, events;
-	/* These are used to detect a runaway interrupt situation.
-	 *
-	 * If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
-	 * we panic and shut down the hardware
-	 */
-	/* jiffies value the last time we were called */
-	static int last_irq_jiffy; /* = 0 */
-	static int loops_this_jiffy; /* = 0 */
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0) {
-		/* If hw is unavailable - we don't know if the irq was
-		 * for us or not */
-		return IRQ_HANDLED;
-	}
-
-	evstat = hermes_read_regn(hw, EVSTAT);
-	events = evstat & hw->inten;
-	if (!events) {
-		orinoco_unlock(priv, &flags);
-		return IRQ_NONE;
-	}
-
-	if (jiffies != last_irq_jiffy)
-		loops_this_jiffy = 0;
-	last_irq_jiffy = jiffies;
-
-	while (events && count--) {
-		if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
-			printk(KERN_WARNING "%s: IRQ handler is looping too "
-			       "much! Resetting.\n", dev->name);
-			/* Disable interrupts for now */
-			hermes_set_irqmask(hw, 0);
-			schedule_work(&priv->reset_work);
-			break;
-		}
-
-		/* Check the card hasn't been removed */
-		if (!hermes_present(hw)) {
-			DEBUG(0, "orinoco_interrupt(): card removed\n");
-			break;
-		}
-
-		if (events & HERMES_EV_TICK)
-			__orinoco_ev_tick(dev, hw);
-		if (events & HERMES_EV_WTERR)
-			__orinoco_ev_wterr(dev, hw);
-		if (events & HERMES_EV_INFDROP)
-			__orinoco_ev_infdrop(dev, hw);
-		if (events & HERMES_EV_INFO)
-			__orinoco_ev_info(dev, hw);
-		if (events & HERMES_EV_RX)
-			__orinoco_ev_rx(dev, hw);
-		if (events & HERMES_EV_TXEXC)
-			__orinoco_ev_txexc(dev, hw);
-		if (events & HERMES_EV_TX)
-			__orinoco_ev_tx(dev, hw);
-		if (events & HERMES_EV_ALLOC)
-			__orinoco_ev_alloc(dev, hw);
-
-		hermes_write_regn(hw, EVACK, evstat);
-
-		evstat = hermes_read_regn(hw, EVSTAT);
-		events = evstat & hw->inten;
-	}
-
-	orinoco_unlock(priv, &flags);
-	return IRQ_HANDLED;
-}
-EXPORT_SYMBOL(orinoco_interrupt);
-
-/********************************************************************/
-/* Power management                                                 */
-/********************************************************************/
-#if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT)
-static int orinoco_pm_notifier(struct notifier_block *notifier,
-			       unsigned long pm_event,
-			       void *unused)
-{
-	struct orinoco_private *priv = container_of(notifier,
-						    struct orinoco_private,
-						    pm_notifier);
-
-	/* All we need to do is cache the firmware before suspend, and
-	 * release it when we come out.
-	 *
-	 * Only need to do this if we're downloading firmware. */
-	if (!priv->do_fw_download)
-		return NOTIFY_DONE;
-
-	switch (pm_event) {
-	case PM_HIBERNATION_PREPARE:
-	case PM_SUSPEND_PREPARE:
-		orinoco_cache_fw(priv, 0);
-		break;
-
-	case PM_POST_RESTORE:
-		/* Restore from hibernation failed. We need to clean
-		 * up in exactly the same way, so fall through. */
-	case PM_POST_HIBERNATION:
-	case PM_POST_SUSPEND:
-		orinoco_uncache_fw(priv);
-		break;
-
-	case PM_RESTORE_PREPARE:
-	default:
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static void orinoco_register_pm_notifier(struct orinoco_private *priv)
-{
-	priv->pm_notifier.notifier_call = orinoco_pm_notifier;
-	register_pm_notifier(&priv->pm_notifier);
-}
-
-static void orinoco_unregister_pm_notifier(struct orinoco_private *priv)
-{
-	unregister_pm_notifier(&priv->pm_notifier);
-}
-#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
-#define orinoco_register_pm_notifier(priv) do { } while (0)
-#define orinoco_unregister_pm_notifier(priv) do { } while (0)
-#endif
-
-/********************************************************************/
-/* Initialization                                                   */
-/********************************************************************/
-
-int orinoco_init(struct orinoco_private *priv)
-{
-	struct device *dev = priv->dev;
-	struct wiphy *wiphy = priv_to_wiphy(priv);
-	struct hermes *hw = &priv->hw;
-	int err = 0;
-
-	/* No need to lock, the hw_unavailable flag is already set in
-	 * alloc_orinocodev() */
-	priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN;
-
-	/* Initialize the firmware */
-	err = hw->ops->init(hw);
-	if (err != 0) {
-		dev_err(dev, "Failed to initialize firmware (err = %d)\n",
-			err);
-		goto out;
-	}
-
-	err = determine_fw_capabilities(priv, wiphy->fw_version,
-					sizeof(wiphy->fw_version),
-					&wiphy->hw_version);
-	if (err != 0) {
-		dev_err(dev, "Incompatible firmware, aborting\n");
-		goto out;
-	}
-
-	if (priv->do_fw_download) {
-#ifdef CONFIG_HERMES_CACHE_FW_ON_INIT
-		orinoco_cache_fw(priv, 0);
-#endif
-
-		err = orinoco_download(priv);
-		if (err)
-			priv->do_fw_download = 0;
-
-		/* Check firmware version again */
-		err = determine_fw_capabilities(priv, wiphy->fw_version,
-						sizeof(wiphy->fw_version),
-						&wiphy->hw_version);
-		if (err != 0) {
-			dev_err(dev, "Incompatible firmware, aborting\n");
-			goto out;
-		}
-	}
-
-	if (priv->has_port3)
-		dev_info(dev, "Ad-hoc demo mode supported\n");
-	if (priv->has_ibss)
-		dev_info(dev, "IEEE standard IBSS ad-hoc mode supported\n");
-	if (priv->has_wep)
-		dev_info(dev, "WEP supported, %s-bit key\n",
-			 priv->has_big_wep ? "104" : "40");
-	if (priv->has_wpa) {
-		dev_info(dev, "WPA-PSK supported\n");
-		if (orinoco_mic_init(priv)) {
-			dev_err(dev, "Failed to setup MIC crypto algorithm. "
-				"Disabling WPA support\n");
-			priv->has_wpa = 0;
-		}
-	}
-
-	err = orinoco_hw_read_card_settings(priv, wiphy->perm_addr);
-	if (err)
-		goto out;
-
-	err = orinoco_hw_allocate_fid(priv);
-	if (err) {
-		dev_err(dev, "Failed to allocate NIC buffer!\n");
-		goto out;
-	}
-
-	/* Set up the default configuration */
-	priv->iw_mode = NL80211_IFTYPE_STATION;
-	/* By default use IEEE/IBSS ad-hoc mode if we have it */
-	priv->prefer_port3 = priv->has_port3 && (!priv->has_ibss);
-	set_port_type(priv);
-	priv->channel = 0; /* use firmware default */
-
-	priv->promiscuous = 0;
-	priv->encode_alg = ORINOCO_ALG_NONE;
-	priv->tx_key = 0;
-	priv->wpa_enabled = 0;
-	priv->tkip_cm_active = 0;
-	priv->key_mgmt = 0;
-	priv->wpa_ie_len = 0;
-	priv->wpa_ie = NULL;
-
-	if (orinoco_wiphy_register(wiphy)) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	/* Make the hardware available, as long as it hasn't been
-	 * removed elsewhere (e.g. by PCMCIA hot unplug) */
-	orinoco_lock_irq(priv);
-	priv->hw_unavailable--;
-	orinoco_unlock_irq(priv);
-
-	dev_dbg(dev, "Ready\n");
-
- out:
-	return err;
-}
-EXPORT_SYMBOL(orinoco_init);
-
-static const struct net_device_ops orinoco_netdev_ops = {
-	.ndo_open		= orinoco_open,
-	.ndo_stop		= orinoco_stop,
-	.ndo_start_xmit		= orinoco_xmit,
-	.ndo_set_rx_mode	= orinoco_set_multicast_list,
-	.ndo_change_mtu		= orinoco_change_mtu,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_tx_timeout		= orinoco_tx_timeout,
-};
-
-/* Allocate private data.
- *
- * This driver has a number of structures associated with it
- *  netdev - Net device structure for each network interface
- *  wiphy - structure associated with wireless phy
- *  wireless_dev (wdev) - structure for each wireless interface
- *  hw - structure for hermes chip info
- *  card - card specific structure for use by the card driver
- *         (airport, orinoco_cs)
- *  priv - orinoco private data
- *  device - generic linux device structure
- *
- *  +---------+    +---------+
- *  |  wiphy  |    | netdev  |
- *  | +-------+    | +-------+
- *  | | priv  |    | | wdev  |
- *  | | +-----+    +-+-------+
- *  | | | hw  |
- *  | +-+-----+
- *  | | card  |
- *  +-+-------+
- *
- * priv has a link to netdev and device
- * wdev has a link to wiphy
- */
-struct orinoco_private
-*alloc_orinocodev(int sizeof_card,
-		  struct device *device,
-		  int (*hard_reset)(struct orinoco_private *),
-		  int (*stop_fw)(struct orinoco_private *, int))
-{
-	struct orinoco_private *priv;
-	struct wiphy *wiphy;
-
-	/* allocate wiphy
-	 * NOTE: We only support a single virtual interface
-	 *       but this may change when monitor mode is added
-	 */
-	wiphy = wiphy_new(&orinoco_cfg_ops,
-			  sizeof(struct orinoco_private) + sizeof_card);
-	if (!wiphy)
-		return NULL;
-
-	priv = wiphy_priv(wiphy);
-	priv->dev = device;
-
-	if (sizeof_card)
-		priv->card = (void *)((unsigned long)priv
-				      + sizeof(struct orinoco_private));
-	else
-		priv->card = NULL;
-
-	orinoco_wiphy_init(wiphy);
-
-#ifdef WIRELESS_SPY
-	priv->wireless_data.spy_data = &priv->spy_data;
-#endif
-
-	/* Set up default callbacks */
-	priv->hard_reset = hard_reset;
-	priv->stop_fw = stop_fw;
-
-	spin_lock_init(&priv->lock);
-	priv->open = 0;
-	priv->hw_unavailable = 1; /* orinoco_init() must clear this
-				   * before anything else touches the
-				   * hardware */
-	INIT_WORK(&priv->reset_work, orinoco_reset);
-	INIT_WORK(&priv->join_work, orinoco_join_ap);
-	INIT_WORK(&priv->wevent_work, orinoco_send_wevents);
-
-	INIT_LIST_HEAD(&priv->rx_list);
-	tasklet_setup(&priv->rx_tasklet, orinoco_rx_isr_tasklet);
-
-	spin_lock_init(&priv->scan_lock);
-	INIT_LIST_HEAD(&priv->scan_list);
-	INIT_WORK(&priv->process_scan, orinoco_process_scan_results);
-
-	priv->last_linkstatus = 0xffff;
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
-	priv->cached_pri_fw = NULL;
-	priv->cached_fw = NULL;
-#endif
-
-	/* Register PM notifiers */
-	orinoco_register_pm_notifier(priv);
-
-	return priv;
-}
-EXPORT_SYMBOL(alloc_orinocodev);
-
-/* We can only support a single interface. We provide a separate
- * function to set it up to distinguish between hardware
- * initialisation and interface setup.
- *
- * The base_addr and irq parameters are passed on to netdev for use
- * with SIOCGIFMAP.
- */
-int orinoco_if_add(struct orinoco_private *priv,
-		   unsigned long base_addr,
-		   unsigned int irq,
-		   const struct net_device_ops *ops)
-{
-	struct wiphy *wiphy = priv_to_wiphy(priv);
-	struct wireless_dev *wdev;
-	struct net_device *dev;
-	int ret;
-
-	dev = alloc_etherdev(sizeof(struct wireless_dev));
-
-	if (!dev)
-		return -ENOMEM;
-
-	/* Initialise wireless_dev */
-	wdev = netdev_priv(dev);
-	wdev->wiphy = wiphy;
-	wdev->iftype = NL80211_IFTYPE_STATION;
-
-	/* Setup / override net_device fields */
-	dev->ieee80211_ptr = wdev;
-	dev->watchdog_timeo = HZ; /* 1 second timeout */
-	dev->wireless_handlers = &orinoco_handler_def;
-#ifdef WIRELESS_SPY
-	dev->wireless_data = &priv->wireless_data;
-#endif
-	/* Default to standard ops if not set */
-	if (ops)
-		dev->netdev_ops = ops;
-	else
-		dev->netdev_ops = &orinoco_netdev_ops;
-
-	/* we use the default eth_mac_addr for setting the MAC addr */
-
-	/* Reserve space in skb for the SNAP header */
-	dev->needed_headroom = ENCAPS_OVERHEAD;
-
-	netif_carrier_off(dev);
-
-	eth_hw_addr_set(dev, wiphy->perm_addr);
-
-	dev->base_addr = base_addr;
-	dev->irq = irq;
-
-	dev->min_mtu = ORINOCO_MIN_MTU;
-	dev->max_mtu = ORINOCO_MAX_MTU;
-
-	SET_NETDEV_DEV(dev, priv->dev);
-	ret = register_netdev(dev);
-	if (ret)
-		goto fail;
-
-	priv->ndev = dev;
-
-	/* Report what we've done */
-	dev_dbg(priv->dev, "Registered interface %s.\n", dev->name);
-
-	return 0;
-
- fail:
-	free_netdev(dev);
-	return ret;
-}
-EXPORT_SYMBOL(orinoco_if_add);
-
-void orinoco_if_del(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-
-	unregister_netdev(dev);
-	free_netdev(dev);
-}
-EXPORT_SYMBOL(orinoco_if_del);
-
-void free_orinocodev(struct orinoco_private *priv)
-{
-	struct wiphy *wiphy = priv_to_wiphy(priv);
-	struct orinoco_rx_data *rx_data, *temp;
-	struct orinoco_scan_data *sd, *sdtemp;
-
-	/* If the tasklet is scheduled when we call tasklet_kill it
-	 * will run one final time. However the tasklet will only
-	 * drain priv->rx_list if the hw is still available. */
-	tasklet_kill(&priv->rx_tasklet);
-
-	/* Explicitly drain priv->rx_list */
-	list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
-		list_del(&rx_data->list);
-
-		dev_kfree_skb(rx_data->skb);
-		kfree(rx_data->desc);
-		kfree(rx_data);
-	}
-
-	cancel_work_sync(&priv->process_scan);
-	/* Explicitly drain priv->scan_list */
-	list_for_each_entry_safe(sd, sdtemp, &priv->scan_list, list) {
-		list_del(&sd->list);
-
-		if (sd->len > 0)
-			kfree(sd->buf);
-		kfree(sd);
-	}
-
-	orinoco_unregister_pm_notifier(priv);
-	orinoco_uncache_fw(priv);
-
-	priv->wpa_ie_len = 0;
-	kfree(priv->wpa_ie);
-	orinoco_mic_free(priv);
-	wiphy_free(wiphy);
-}
-EXPORT_SYMBOL(free_orinocodev);
-
-int orinoco_up(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	unsigned long flags;
-	int err;
-
-	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
-
-	err = orinoco_reinit_firmware(priv);
-	if (err) {
-		printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
-		       dev->name, err);
-		goto exit;
-	}
-
-	netif_device_attach(dev);
-	priv->hw_unavailable--;
-
-	if (priv->open && !priv->hw_unavailable) {
-		err = __orinoco_up(priv);
-		if (err)
-			printk(KERN_ERR "%s: Error %d restarting card\n",
-			       dev->name, err);
-	}
-
-exit:
-	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(orinoco_up);
-
-void orinoco_down(struct orinoco_private *priv)
-{
-	struct net_device *dev = priv->ndev;
-	unsigned long flags;
-	int err;
-
-	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
-	err = __orinoco_down(priv);
-	if (err)
-		printk(KERN_WARNING "%s: Error %d downing interface\n",
-		       dev->name, err);
-
-	netif_device_detach(dev);
-	priv->hw_unavailable++;
-	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-}
-EXPORT_SYMBOL(orinoco_down);
-
-/********************************************************************/
-/* Module initialization                                            */
-/********************************************************************/
-
-/* Can't be declared "const" or the whole __initdata section will
- * become const */
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (David Gibson <hermes@gibson.dropbear.id.au>, "
-	"Pavel Roskin <proski@gnu.org>, et al)";
-
-static int __init init_orinoco(void)
-{
-	printk(KERN_DEBUG "%s\n", version);
-	return 0;
-}
-
-static void __exit exit_orinoco(void)
-{
-}
-
-module_init(init_orinoco);
-module_exit(exit_orinoco);
diff --git a/drivers/net/wireless/intersil/orinoco/main.h b/drivers/net/wireless/intersil/orinoco/main.h
deleted file mode 100644
index 5a8fec2613..0000000000
--- a/drivers/net/wireless/intersil/orinoco/main.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Exports from main to helper modules
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_MAIN_H_
-#define _ORINOCO_MAIN_H_
-
-#include <linux/ieee80211.h>
-#include "orinoco.h"
-
-/********************************************************************/
-/* Compile time configuration and compatibility stuff               */
-/********************************************************************/
-
-/* We do this this way to avoid ifdefs in the actual code */
-#ifdef WIRELESS_SPY
-#define SPY_NUMBER(priv)	(priv->spy_data.spy_number)
-#else
-#define SPY_NUMBER(priv)	0
-#endif /* WIRELESS_SPY */
-
-/********************************************************************/
-
-/* Export module parameter */
-extern int force_monitor;
-
-/* Forward declarations */
-struct net_device;
-struct work_struct;
-
-void set_port_type(struct orinoco_private *priv);
-int orinoco_commit(struct orinoco_private *priv);
-void orinoco_reset(struct work_struct *work);
-
-/* Information element helpers - find a home for these... */
-#define WPA_OUI_TYPE	"\x00\x50\xF2\x01"
-#define WPA_SELECTOR_LEN 4
-static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len)
-{
-	u8 *p = data;
-	while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) {
-		if ((p[0] == WLAN_EID_VENDOR_SPECIFIC) &&
-		    (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0))
-			return p;
-		p += p[1] + 2;
-	}
-	return NULL;
-}
-
-#endif /* _ORINOCO_MAIN_H_ */
diff --git a/drivers/net/wireless/intersil/orinoco/mic.c b/drivers/net/wireless/intersil/orinoco/mic.c
deleted file mode 100644
index a324bc4b79..0000000000
--- a/drivers/net/wireless/intersil/orinoco/mic.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/* Orinoco MIC helpers
- *
- * See copyright notice in main.c
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/if_ether.h>
-#include <linux/scatterlist.h>
-#include <crypto/hash.h>
-
-#include "orinoco.h"
-#include "mic.h"
-
-/********************************************************************/
-/* Michael MIC crypto setup                                         */
-/********************************************************************/
-int orinoco_mic_init(struct orinoco_private *priv)
-{
-	priv->tx_tfm_mic = crypto_alloc_shash("michael_mic", 0, 0);
-	if (IS_ERR(priv->tx_tfm_mic)) {
-		printk(KERN_DEBUG "%s: could not allocate "
-		       "crypto API michael_mic\n", __func__);
-		priv->tx_tfm_mic = NULL;
-		return -ENOMEM;
-	}
-
-	priv->rx_tfm_mic = crypto_alloc_shash("michael_mic", 0, 0);
-	if (IS_ERR(priv->rx_tfm_mic)) {
-		printk(KERN_DEBUG "%s: could not allocate "
-		       "crypto API michael_mic\n", __func__);
-		priv->rx_tfm_mic = NULL;
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-void orinoco_mic_free(struct orinoco_private *priv)
-{
-	if (priv->tx_tfm_mic)
-		crypto_free_shash(priv->tx_tfm_mic);
-	if (priv->rx_tfm_mic)
-		crypto_free_shash(priv->rx_tfm_mic);
-}
-
-int orinoco_mic(struct crypto_shash *tfm_michael, u8 *key,
-		u8 *da, u8 *sa, u8 priority,
-		u8 *data, size_t data_len, u8 *mic)
-{
-	SHASH_DESC_ON_STACK(desc, tfm_michael);
-	u8 hdr[ETH_HLEN + 2]; /* size of header + padding */
-	int err;
-
-	if (tfm_michael == NULL) {
-		printk(KERN_WARNING "%s: tfm_michael == NULL\n", __func__);
-		return -1;
-	}
-
-	/* Copy header into buffer. We need the padding on the end zeroed */
-	memcpy(&hdr[0], da, ETH_ALEN);
-	memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN);
-	hdr[ETH_ALEN * 2] = priority;
-	hdr[ETH_ALEN * 2 + 1] = 0;
-	hdr[ETH_ALEN * 2 + 2] = 0;
-	hdr[ETH_ALEN * 2 + 3] = 0;
-
-	desc->tfm = tfm_michael;
-
-	err = crypto_shash_setkey(tfm_michael, key, MIC_KEYLEN);
-	if (err)
-		return err;
-
-	err = crypto_shash_init(desc);
-	if (err)
-		return err;
-
-	err = crypto_shash_update(desc, hdr, sizeof(hdr));
-	if (err)
-		return err;
-
-	err = crypto_shash_update(desc, data, data_len);
-	if (err)
-		return err;
-
-	err = crypto_shash_final(desc, mic);
-	shash_desc_zero(desc);
-
-	return err;
-}
diff --git a/drivers/net/wireless/intersil/orinoco/mic.h b/drivers/net/wireless/intersil/orinoco/mic.h
deleted file mode 100644
index e8724e8892..0000000000
--- a/drivers/net/wireless/intersil/orinoco/mic.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Orinoco MIC helpers
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_MIC_H_
-#define _ORINOCO_MIC_H_
-
-#include <linux/types.h>
-#include <crypto/hash.h>
-
-#define MICHAEL_MIC_LEN 8
-
-/* Forward declarations */
-struct orinoco_private;
-struct crypto_ahash;
-
-int orinoco_mic_init(struct orinoco_private *priv);
-void orinoco_mic_free(struct orinoco_private *priv);
-int orinoco_mic(struct crypto_shash *tfm_michael, u8 *key,
-		u8 *da, u8 *sa, u8 priority,
-		u8 *data, size_t data_len, u8 *mic);
-
-#endif /* ORINOCO_MIC_H */
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco.h b/drivers/net/wireless/intersil/orinoco/orinoco.h
deleted file mode 100644
index cdd026af10..0000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/* orinoco.h
- *
- * Common definitions to all pieces of the various orinoco
- * drivers
- */
-
-#ifndef _ORINOCO_H
-#define _ORINOCO_H
-
-#define DRIVER_VERSION "0.15"
-
-#include <linux/interrupt.h>
-#include <linux/suspend.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <net/cfg80211.h>
-
-#include "hermes.h"
-
-/* To enable debug messages */
-/*#define ORINOCO_DEBUG		3*/
-
-#define WIRELESS_SPY		/* enable iwspy support */
-
-#define MAX_SCAN_LEN		4096
-
-#define ORINOCO_SEQ_LEN		8
-#define ORINOCO_MAX_KEY_SIZE	14
-#define ORINOCO_MAX_KEYS	4
-
-struct orinoco_key {
-	__le16 len;	/* always stored as little-endian */
-	char data[ORINOCO_MAX_KEY_SIZE];
-} __packed;
-
-#define TKIP_KEYLEN	16
-#define MIC_KEYLEN	8
-
-struct orinoco_tkip_key {
-	u8 tkip[TKIP_KEYLEN];
-	u8 tx_mic[MIC_KEYLEN];
-	u8 rx_mic[MIC_KEYLEN];
-};
-
-enum orinoco_alg {
-	ORINOCO_ALG_NONE,
-	ORINOCO_ALG_WEP,
-	ORINOCO_ALG_TKIP
-};
-
-enum fwtype {
-	FIRMWARE_TYPE_AGERE,
-	FIRMWARE_TYPE_INTERSIL,
-	FIRMWARE_TYPE_SYMBOL
-};
-
-struct firmware;
-
-struct orinoco_private {
-	void *card;	/* Pointer to card dependent structure */
-	struct device *dev;
-	int (*hard_reset)(struct orinoco_private *);
-	int (*stop_fw)(struct orinoco_private *, int);
-
-	struct ieee80211_supported_band band;
-	struct ieee80211_channel channels[14];
-	u32 cipher_suites[3];
-
-	/* Synchronisation stuff */
-	spinlock_t lock;
-	int hw_unavailable;
-	struct work_struct reset_work;
-
-	/* Interrupt tasklets */
-	struct tasklet_struct rx_tasklet;
-	struct list_head rx_list;
-
-	/* driver state */
-	int open;
-	u16 last_linkstatus;
-	struct work_struct join_work;
-	struct work_struct wevent_work;
-
-	/* Net device stuff */
-	struct net_device *ndev;
-	struct iw_statistics wstats;
-
-	/* Hardware control variables */
-	struct hermes hw;
-	u16 txfid;
-
-	/* Capabilities of the hardware/firmware */
-	enum fwtype firmware_type;
-	int ibss_port;
-	int nicbuf_size;
-	u16 channel_mask;
-
-	/* Boolean capabilities */
-	unsigned int has_ibss:1;
-	unsigned int has_port3:1;
-	unsigned int has_wep:1;
-	unsigned int has_big_wep:1;
-	unsigned int has_mwo:1;
-	unsigned int has_pm:1;
-	unsigned int has_preamble:1;
-	unsigned int has_sensitivity:1;
-	unsigned int has_hostscan:1;
-	unsigned int has_alt_txcntl:1;
-	unsigned int has_ext_scan:1;
-	unsigned int has_wpa:1;
-	unsigned int do_fw_download:1;
-	unsigned int broken_disableport:1;
-	unsigned int broken_monitor:1;
-	unsigned int prefer_port3:1;
-
-	/* Configuration paramaters */
-	enum nl80211_iftype iw_mode;
-	enum orinoco_alg encode_alg;
-	u16 wep_restrict, tx_key;
-	struct key_params keys[ORINOCO_MAX_KEYS];
-
-	int bitratemode;
-	char nick[IW_ESSID_MAX_SIZE + 1];
-	char desired_essid[IW_ESSID_MAX_SIZE + 1];
-	char desired_bssid[ETH_ALEN];
-	int bssid_fixed;
-	u16 frag_thresh, mwo_robust;
-	u16 channel;
-	u16 ap_density, rts_thresh;
-	u16 pm_on, pm_mcast, pm_period, pm_timeout;
-	u16 preamble;
-	u16 short_retry_limit, long_retry_limit;
-	u16 retry_lifetime;
-#ifdef WIRELESS_SPY
-	struct iw_spy_data spy_data; /* iwspy support */
-	struct iw_public_data	wireless_data;
-#endif
-
-	/* Configuration dependent variables */
-	int port_type, createibss;
-	int promiscuous, mc_count;
-
-	/* Scanning support */
-	struct cfg80211_scan_request *scan_request;
-	struct work_struct process_scan;
-	struct list_head scan_list;
-	spinlock_t scan_lock; /* protects the scan list */
-
-	/* WPA support */
-	u8 *wpa_ie;
-	int wpa_ie_len;
-
-	struct crypto_shash *rx_tfm_mic;
-	struct crypto_shash *tx_tfm_mic;
-
-	unsigned int wpa_enabled:1;
-	unsigned int tkip_cm_active:1;
-	unsigned int key_mgmt:3;
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
-	/* Cached in memory firmware to use during ->resume. */
-	const struct firmware *cached_pri_fw;
-	const struct firmware *cached_fw;
-#endif
-
-	struct notifier_block pm_notifier;
-};
-
-#ifdef ORINOCO_DEBUG
-extern int orinoco_debug;
-#define DEBUG(n, args...) do { \
-	if (orinoco_debug > (n)) \
-		printk(KERN_DEBUG args); \
-} while (0)
-#else
-#define DEBUG(n, args...) do { } while (0)
-#endif	/* ORINOCO_DEBUG */
-
-/********************************************************************/
-/* Exported prototypes                                              */
-/********************************************************************/
-
-struct orinoco_private *alloc_orinocodev(int sizeof_card, struct device *device,
-					 int (*hard_reset)(struct orinoco_private *),
-					 int (*stop_fw)(struct orinoco_private *, int));
-void free_orinocodev(struct orinoco_private *priv);
-int orinoco_init(struct orinoco_private *priv);
-int orinoco_if_add(struct orinoco_private *priv, unsigned long base_addr,
-		   unsigned int irq, const struct net_device_ops *ops);
-void orinoco_if_del(struct orinoco_private *priv);
-int orinoco_up(struct orinoco_private *priv);
-void orinoco_down(struct orinoco_private *priv);
-irqreturn_t orinoco_interrupt(int irq, void *dev_id);
-
-void __orinoco_ev_info(struct net_device *dev, struct hermes *hw);
-void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw);
-
-int orinoco_process_xmit_skb(struct sk_buff *skb,
-			     struct net_device *dev,
-			     struct orinoco_private *priv,
-			     int *tx_control,
-			     u8 *mic);
-
-/* Common ndo functions exported for reuse by orinoco_usb */
-int orinoco_open(struct net_device *dev);
-int orinoco_stop(struct net_device *dev);
-void orinoco_set_multicast_list(struct net_device *dev);
-int orinoco_change_mtu(struct net_device *dev, int new_mtu);
-void orinoco_tx_timeout(struct net_device *dev, unsigned int txqueue);
-
-/********************************************************************/
-/* Locking and synchronization functions                            */
-/********************************************************************/
-
-static inline int orinoco_lock(struct orinoco_private *priv,
-			       unsigned long *flags)
-{
-	priv->hw.ops->lock_irqsave(&priv->lock, flags);
-	if (priv->hw_unavailable) {
-		DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n",
-		       priv->ndev);
-		priv->hw.ops->unlock_irqrestore(&priv->lock, flags);
-		return -EBUSY;
-	}
-	return 0;
-}
-
-static inline void orinoco_unlock(struct orinoco_private *priv,
-				  unsigned long *flags)
-{
-	priv->hw.ops->unlock_irqrestore(&priv->lock, flags);
-}
-
-static inline void orinoco_lock_irq(struct orinoco_private *priv)
-{
-	priv->hw.ops->lock_irq(&priv->lock);
-}
-
-static inline void orinoco_unlock_irq(struct orinoco_private *priv)
-{
-	priv->hw.ops->unlock_irq(&priv->lock);
-}
-
-/*** Navigate from net_device to orinoco_private ***/
-static inline struct orinoco_private *ndev_priv(struct net_device *dev)
-{
-	struct wireless_dev *wdev = netdev_priv(dev);
-	return wdev_priv(wdev);
-}
-#endif /* _ORINOCO_H */
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_cs.c b/drivers/net/wireless/intersil/orinoco/orinoco_cs.c
deleted file mode 100644
index 03bfd24826..0000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_cs.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/* orinoco_cs.c (formerly known as dldwd_cs.c)
- *
- * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
- * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
- * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
- * It should also be usable on various Prism II based cards such as the
- * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
- * cards such as the 3Com AirConnect and Ericsson WLAN.
- *
- * Copyright notice & release notes in file main.c
- */
-
-#define DRIVER_NAME "orinoco_cs"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module stuff							    */
-/********************************************************************/
-
-MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco,"
-		   " Prism II based and similar wireless cards");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Module parameters */
-
-/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
- * don't have any CIS entry for it. This workaround it... */
-static int ignore_cis_vcc; /* = 0 */
-module_param(ignore_cis_vcc, int, 0);
-MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
-
-/********************************************************************/
-/* Data structures						    */
-/********************************************************************/
-
-/* PCMCIA specific device information (goes in the card field of
- * struct orinoco_private */
-struct orinoco_pccard {
-	struct pcmcia_device	*p_dev;
-
-	/* Used to handle hard reset */
-	/* yuck, we need this hack to work around the insanity of the
-	 * PCMCIA layer */
-	unsigned long hard_reset_in_progress;
-};
-
-
-/********************************************************************/
-/* Function prototypes						    */
-/********************************************************************/
-
-static int orinoco_cs_config(struct pcmcia_device *link);
-static void orinoco_cs_release(struct pcmcia_device *link);
-static void orinoco_cs_detach(struct pcmcia_device *p_dev);
-
-/********************************************************************/
-/* Device methods						    */
-/********************************************************************/
-
-static int
-orinoco_cs_hard_reset(struct orinoco_private *priv)
-{
-	struct orinoco_pccard *card = priv->card;
-	struct pcmcia_device *link = card->p_dev;
-	int err;
-
-	/* We need atomic ops here, because we're not holding the lock */
-	set_bit(0, &card->hard_reset_in_progress);
-
-	err = pcmcia_reset_card(link->socket);
-	if (err)
-		return err;
-
-	msleep(100);
-	clear_bit(0, &card->hard_reset_in_progress);
-
-	return 0;
-}
-
-/********************************************************************/
-/* PCMCIA stuff							    */
-/********************************************************************/
-
-static int
-orinoco_cs_probe(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv;
-	struct orinoco_pccard *card;
-	int ret;
-
-	priv = alloc_orinocodev(sizeof(*card), &link->dev,
-				orinoco_cs_hard_reset, NULL);
-	if (!priv)
-		return -ENOMEM;
-	card = priv->card;
-
-	/* Link both structures together */
-	card->p_dev = link;
-	link->priv = priv;
-
-	ret = orinoco_cs_config(link);
-	if (ret)
-		goto err_free_orinocodev;
-
-	return 0;
-
-err_free_orinocodev:
-	free_orinocodev(priv);
-	return ret;
-}
-
-static void orinoco_cs_detach(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-
-	orinoco_if_del(priv);
-
-	orinoco_cs_release(link);
-
-	wiphy_unregister(priv_to_wiphy(priv));
-	free_orinocodev(priv);
-}				/* orinoco_cs_detach */
-
-static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
-	if (p_dev->config_index == 0)
-		return -EINVAL;
-
-	return pcmcia_request_io(p_dev);
-};
-
-static int
-orinoco_cs_config(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-	struct hermes *hw = &priv->hw;
-	int ret;
-	void __iomem *mem;
-
-	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
-		CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
-	if (ignore_cis_vcc)
-		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
-	ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
-	if (ret) {
-		if (!ignore_cis_vcc)
-			printk(KERN_ERR PFX "GetNextTuple(): No matching "
-			       "CIS configuration.  Maybe you need the "
-			       "ignore_cis_vcc=1 parameter.\n");
-		goto failed;
-	}
-
-	mem = ioport_map(link->resource[0]->start,
-			resource_size(link->resource[0]));
-	if (!mem)
-		goto failed;
-
-	/* We initialize the hermes structure before completing PCMCIA
-	 * configuration just in case the interrupt handler gets
-	 * called. */
-	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
-
-	ret = pcmcia_request_irq(link, orinoco_interrupt);
-	if (ret)
-		goto failed;
-
-	ret = pcmcia_enable_device(link);
-	if (ret)
-		goto failed;
-
-	/* Initialise the main driver */
-	if (orinoco_init(priv) != 0) {
-		printk(KERN_ERR PFX "orinoco_init() failed\n");
-		goto failed;
-	}
-
-	/* Register an interface with the stack */
-	if (orinoco_if_add(priv, link->resource[0]->start,
-			   link->irq, NULL) != 0) {
-		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
-		goto failed;
-	}
-
-	return 0;
-
- failed:
-	orinoco_cs_release(link);
-	return -ENODEV;
-}				/* orinoco_cs_config */
-
-static void
-orinoco_cs_release(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-	unsigned long flags;
-
-	/* We're committed to taking the device away now, so mark the
-	 * hardware as unavailable */
-	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
-	priv->hw_unavailable++;
-	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-
-	pcmcia_disable_device(link);
-	if (priv->hw.iobase)
-		ioport_unmap(priv->hw.iobase);
-}				/* orinoco_cs_release */
-
-static int orinoco_cs_suspend(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-	struct orinoco_pccard *card = priv->card;
-
-	/* This is probably racy, but I can't think of
-	   a better way, short of rewriting the PCMCIA
-	   layer to not suck :-( */
-	if (!test_bit(0, &card->hard_reset_in_progress))
-		orinoco_down(priv);
-
-	return 0;
-}
-
-static int orinoco_cs_resume(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-	struct orinoco_pccard *card = priv->card;
-	int err = 0;
-
-	if (!test_bit(0, &card->hard_reset_in_progress))
-		err = orinoco_up(priv);
-
-	return err;
-}
-
-
-/********************************************************************/
-/* Module initialization					    */
-/********************************************************************/
-
-static const struct pcmcia_device_id orinoco_cs_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
-	PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
-	PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
-	PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
-	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
-	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
-	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
-	PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
-	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
-	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
-	PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
-	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
-	PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
-	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
-	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
-	PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
-	PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
-	PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
-	PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
-	PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
-	PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
-	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
-	PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
-	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
-	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
-	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
-	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
-	PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
-	PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
-	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
-	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
-	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
-	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
-	PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.01", 0xd27deb1a), /* Lucent Orinoco */
-#ifdef CONFIG_HERMES_PRISM
-	/* Only entries that certainly identify Prism chipset */
-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
-	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
-	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
-	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
-	PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
-	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
-	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
-	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
-	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
-	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
-	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
-	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
-	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
-	PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
-	PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
-	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
-	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
-	PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
-	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
-	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
-	PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
-	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
-	PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
-	PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
-	PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
-	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
-	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
-	PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
-	PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
-	PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
-	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
-	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
-	PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
-	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
-	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
-	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
-	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
-	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
-	PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
-	PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
-	PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
-	PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
-
-	/* This may be Agere or Intersil Firmware */
-	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
-#endif
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
-
-static struct pcmcia_driver orinoco_driver = {
-	.owner		= THIS_MODULE,
-	.name		= DRIVER_NAME,
-	.probe		= orinoco_cs_probe,
-	.remove		= orinoco_cs_detach,
-	.id_table       = orinoco_cs_ids,
-	.suspend	= orinoco_cs_suspend,
-	.resume		= orinoco_cs_resume,
-};
-module_pcmcia_driver(orinoco_driver);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c b/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c
deleted file mode 100644
index 18bd0d9876..0000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/* orinoco_nortel.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in
- * Nortel emobility, Symbol LA-4113 and Symbol LA-4123.
- *
- * Copyright (C) 2002 Tobias Hoffmann
- *           (C) 2003 Christoph Jungegger <disdos@traum404.de>
- *
- * Some of this code is borrowed from orinoco_plx.c
- *	Copyright (C) 2001 Daniel Barlow
- * Some of this code is borrowed from orinoco_pci.c
- *  Copyright (C) 2001 Jean Tourrilhes
- * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
- * has been copied from it. linux-wlan-ng-0.1.10 is originally :
- *	Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define DRIVER_NAME "orinoco_nortel"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_OFFSET    (0xe0)	/* COR attribute offset of Prism2 PC card */
-#define COR_VALUE     (COR_LEVEL_REQ | COR_FUNC_ENA)	/* Enable PC card with interrupt in level trigger */
-
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- * We need this to get going...
- * This is the part of the code that is strongly inspired from wlan-ng
- *
- * Note bis : Don't try to access HERMES_CMD during the reset phase.
- * It just won't work !
- */
-static int orinoco_nortel_cor_reset(struct orinoco_private *priv)
-{
-	struct orinoco_pci_card *card = priv->card;
-
-	/* Assert the reset until the card notices */
-	iowrite16(8, card->bridge_io + 2);
-	ioread16(card->attr_io + COR_OFFSET);
-	iowrite16(0x80, card->attr_io + COR_OFFSET);
-	mdelay(1);
-
-	/* Give time for the card to recover from this hard effort */
-	iowrite16(0, card->attr_io + COR_OFFSET);
-	iowrite16(0, card->attr_io + COR_OFFSET);
-	mdelay(1);
-
-	/* Set COR as usual */
-	iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
-	iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
-	mdelay(1);
-
-	iowrite16(0x228, card->bridge_io + 2);
-
-	return 0;
-}
-
-static int orinoco_nortel_hw_init(struct orinoco_pci_card *card)
-{
-	int i;
-	u32 reg;
-
-	/* Setup bridge */
-	if (ioread16(card->bridge_io) & 1) {
-		printk(KERN_ERR PFX "brg1 answer1 wrong\n");
-		return -EBUSY;
-	}
-	iowrite16(0x118, card->bridge_io + 2);
-	iowrite16(0x108, card->bridge_io + 2);
-	mdelay(30);
-	iowrite16(0x8, card->bridge_io + 2);
-	for (i = 0; i < 30; i++) {
-		mdelay(30);
-		if (ioread16(card->bridge_io) & 0x10)
-			break;
-	}
-	if (i == 30) {
-		printk(KERN_ERR PFX "brg1 timed out\n");
-		return -EBUSY;
-	}
-	if (ioread16(card->attr_io + COR_OFFSET) & 1) {
-		printk(KERN_ERR PFX "brg2 answer1 wrong\n");
-		return -EBUSY;
-	}
-	if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) {
-		printk(KERN_ERR PFX "brg2 answer2 wrong\n");
-		return -EBUSY;
-	}
-	if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) {
-		printk(KERN_ERR PFX "brg2 answer3 wrong\n");
-		return -EBUSY;
-	}
-
-	/* Set the PCMCIA COR register */
-	iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
-	mdelay(1);
-	reg = ioread16(card->attr_io + COR_OFFSET);
-	if (reg != COR_VALUE) {
-		printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
-		       reg);
-		return -EBUSY;
-	}
-
-	/* Set LEDs */
-	iowrite16(1, card->bridge_io + 10);
-	return 0;
-}
-
-static int orinoco_nortel_init_one(struct pci_dev *pdev,
-				   const struct pci_device_id *ent)
-{
-	int err;
-	struct orinoco_private *priv;
-	struct orinoco_pci_card *card;
-	void __iomem *hermes_io, *bridge_io, *attr_io;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot enable PCI device\n");
-		return err;
-	}
-
-	err = pci_request_regions(pdev, DRIVER_NAME);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
-		goto fail_resources;
-	}
-
-	bridge_io = pci_iomap(pdev, 0, 0);
-	if (!bridge_io) {
-		printk(KERN_ERR PFX "Cannot map bridge registers\n");
-		err = -EIO;
-		goto fail_map_bridge;
-	}
-
-	attr_io = pci_iomap(pdev, 1, 0);
-	if (!attr_io) {
-		printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
-		err = -EIO;
-		goto fail_map_attr;
-	}
-
-	hermes_io = pci_iomap(pdev, 2, 0);
-	if (!hermes_io) {
-		printk(KERN_ERR PFX "Cannot map chipset registers\n");
-		err = -EIO;
-		goto fail_map_hermes;
-	}
-
-	/* Allocate network device */
-	priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
-				orinoco_nortel_cor_reset, NULL);
-	if (!priv) {
-		printk(KERN_ERR PFX "Cannot allocate network device\n");
-		err = -ENOMEM;
-		goto fail_alloc;
-	}
-
-	card = priv->card;
-	card->bridge_io = bridge_io;
-	card->attr_io = attr_io;
-
-	hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
-	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
-			  DRIVER_NAME, priv);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
-		err = -EBUSY;
-		goto fail_irq;
-	}
-
-	err = orinoco_nortel_hw_init(card);
-	if (err) {
-		printk(KERN_ERR PFX "Hardware initialization failed\n");
-		goto fail;
-	}
-
-	err = orinoco_nortel_cor_reset(priv);
-	if (err) {
-		printk(KERN_ERR PFX "Initial reset failed\n");
-		goto fail;
-	}
-
-	err = orinoco_init(priv);
-	if (err) {
-		printk(KERN_ERR PFX "orinoco_init() failed\n");
-		goto fail;
-	}
-
-	err = orinoco_if_add(priv, 0, 0, NULL);
-	if (err) {
-		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
-		goto fail_wiphy;
-	}
-
-	pci_set_drvdata(pdev, priv);
-
-	return 0;
-
- fail_wiphy:
-	wiphy_unregister(priv_to_wiphy(priv));
- fail:
-	free_irq(pdev->irq, priv);
-
- fail_irq:
-	free_orinocodev(priv);
-
- fail_alloc:
-	pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
-	pci_iounmap(pdev, attr_io);
-
- fail_map_attr:
-	pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
-	pci_release_regions(pdev);
-
- fail_resources:
-	pci_disable_device(pdev);
-
-	return err;
-}
-
-static void orinoco_nortel_remove_one(struct pci_dev *pdev)
-{
-	struct orinoco_private *priv = pci_get_drvdata(pdev);
-	struct orinoco_pci_card *card = priv->card;
-
-	/* Clear LEDs */
-	iowrite16(0, card->bridge_io + 10);
-
-	orinoco_if_del(priv);
-	wiphy_unregister(priv_to_wiphy(priv));
-	free_irq(pdev->irq, priv);
-	free_orinocodev(priv);
-	pci_iounmap(pdev, priv->hw.iobase);
-	pci_iounmap(pdev, card->attr_io);
-	pci_iounmap(pdev, card->bridge_io);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-static const struct pci_device_id orinoco_nortel_id_table[] = {
-	/* Nortel emobility PCI */
-	{0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
-	/* Symbol LA-4123 PCI */
-	{0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,},
-	{0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table);
-
-static struct pci_driver orinoco_nortel_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= orinoco_nortel_id_table,
-	.probe		= orinoco_nortel_init_one,
-	.remove		= orinoco_nortel_remove_one,
-	.driver.pm	= &orinoco_pci_pm_ops,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
-MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the Nortel PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_nortel_init(void)
-{
-	printk(KERN_DEBUG "%s\n", version);
-	return pci_register_driver(&orinoco_nortel_driver);
-}
-
-static void __exit orinoco_nortel_exit(void)
-{
-	pci_unregister_driver(&orinoco_nortel_driver);
-}
-
-module_init(orinoco_nortel_init);
-module_exit(orinoco_nortel_exit);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c b/drivers/net/wireless/intersil/orinoco/orinoco_pci.c
deleted file mode 100644
index 7e3a6dd60c..0000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/* orinoco_pci.c
- *
- * Driver for Prism 2.5/3 devices that have a direct PCI interface
- * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge).
- * The card contains only one PCI region, which contains all the usual
- * hermes registers, as well as the COR register.
- *
- * Current maintainers are:
- *	Pavel Roskin <proski AT gnu.org>
- * and	David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * Some of this code is borrowed from orinoco_plx.c
- *	Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
- * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
- * has been copied from it. linux-wlan-ng-0.1.10 is originally :
- *	Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
- * This file originally written by:
- *	Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
- * And is now maintained by:
- *	(C) Copyright David Gibson, IBM Corp. 2002-2003.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define DRIVER_NAME "orinoco_pci"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-/* Offset of the COR register of the PCI card */
-#define HERMES_PCI_COR		(0x26)
-
-/* Bitmask to reset the card */
-#define HERMES_PCI_COR_MASK	(0x0080)
-
-/* Magic timeouts for doing the reset.
- * Those times are straight from wlan-ng, and it is claimed that they
- * are necessary. Alan will kill me. Take your time and grab a coffee. */
-#define HERMES_PCI_COR_ONT	(250)		/* ms */
-#define HERMES_PCI_COR_OFFT	(500)		/* ms */
-#define HERMES_PCI_COR_BUSYT	(500)		/* ms */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- * We need this to get going...
- * This is the part of the code that is strongly inspired from wlan-ng
- *
- * Note : This code is done with irq enabled. This mean that many
- * interrupts will occur while we are there. This is why we use the
- * jiffies to regulate time instead of a straight mdelay(). Usually we
- * need only around 245 iteration of the loop to do 250 ms delay.
- *
- * Note bis : Don't try to access HERMES_CMD during the reset phase.
- * It just won't work !
- */
-static int orinoco_pci_cor_reset(struct orinoco_private *priv)
-{
-	struct hermes *hw = &priv->hw;
-	unsigned long timeout;
-	u16 reg;
-
-	/* Assert the reset until the card notices */
-	hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
-	mdelay(HERMES_PCI_COR_ONT);
-
-	/* Give time for the card to recover from this hard effort */
-	hermes_write_regn(hw, PCI_COR, 0x0000);
-	mdelay(HERMES_PCI_COR_OFFT);
-
-	/* The card is ready when it's no longer busy */
-	timeout = jiffies + msecs_to_jiffies(HERMES_PCI_COR_BUSYT);
-	reg = hermes_read_regn(hw, CMD);
-	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
-		mdelay(1);
-		reg = hermes_read_regn(hw, CMD);
-	}
-
-	/* Still busy? */
-	if (reg & HERMES_CMD_BUSY) {
-		printk(KERN_ERR PFX "Busy timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static int orinoco_pci_init_one(struct pci_dev *pdev,
-				const struct pci_device_id *ent)
-{
-	int err;
-	struct orinoco_private *priv;
-	struct orinoco_pci_card *card;
-	void __iomem *hermes_io;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot enable PCI device\n");
-		return err;
-	}
-
-	err = pci_request_regions(pdev, DRIVER_NAME);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
-		goto fail_resources;
-	}
-
-	hermes_io = pci_iomap(pdev, 0, 0);
-	if (!hermes_io) {
-		printk(KERN_ERR PFX "Cannot remap chipset registers\n");
-		err = -EIO;
-		goto fail_map_hermes;
-	}
-
-	/* Allocate network device */
-	priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
-				orinoco_pci_cor_reset, NULL);
-	if (!priv) {
-		printk(KERN_ERR PFX "Cannot allocate network device\n");
-		err = -ENOMEM;
-		goto fail_alloc;
-	}
-
-	card = priv->card;
-
-	hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
-
-	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
-			  DRIVER_NAME, priv);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
-		err = -EBUSY;
-		goto fail_irq;
-	}
-
-	err = orinoco_pci_cor_reset(priv);
-	if (err) {
-		printk(KERN_ERR PFX "Initial reset failed\n");
-		goto fail;
-	}
-
-	err = orinoco_init(priv);
-	if (err) {
-		printk(KERN_ERR PFX "orinoco_init() failed\n");
-		goto fail;
-	}
-
-	err = orinoco_if_add(priv, 0, 0, NULL);
-	if (err) {
-		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
-		goto fail_wiphy;
-	}
-
-	pci_set_drvdata(pdev, priv);
-
-	return 0;
-
- fail_wiphy:
-	wiphy_unregister(priv_to_wiphy(priv));
- fail:
-	free_irq(pdev->irq, priv);
-
- fail_irq:
-	free_orinocodev(priv);
-
- fail_alloc:
-	pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
-	pci_release_regions(pdev);
-
- fail_resources:
-	pci_disable_device(pdev);
-
-	return err;
-}
-
-static void orinoco_pci_remove_one(struct pci_dev *pdev)
-{
-	struct orinoco_private *priv = pci_get_drvdata(pdev);
-
-	orinoco_if_del(priv);
-	wiphy_unregister(priv_to_wiphy(priv));
-	free_irq(pdev->irq, priv);
-	free_orinocodev(priv);
-	pci_iounmap(pdev, priv->hw.iobase);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-static const struct pci_device_id orinoco_pci_id_table[] = {
-	/* Intersil Prism 3 */
-	{0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
-	/* Intersil Prism 2.5 */
-	{0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
-	/* Samsung MagicLAN SWL-2210P */
-	{0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,},
-	{0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table);
-
-static struct pci_driver orinoco_pci_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= orinoco_pci_id_table,
-	.probe		= orinoco_pci_init_one,
-	.remove		= orinoco_pci_remove_one,
-	.driver.pm	= &orinoco_pci_pm_ops,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (Pavel Roskin <proski@gnu.org>,"
-	" David Gibson <hermes@gibson.dropbear.id.au> &"
-	" Jean Tourrilhes <jt@hpl.hp.com>)";
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> &"
-	      " David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_pci_init(void)
-{
-	printk(KERN_DEBUG "%s\n", version);
-	return pci_register_driver(&orinoco_pci_driver);
-}
-
-static void __exit orinoco_pci_exit(void)
-{
-	pci_unregister_driver(&orinoco_pci_driver);
-}
-
-module_init(orinoco_pci_init);
-module_exit(orinoco_pci_exit);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.h b/drivers/net/wireless/intersil/orinoco/orinoco_pci.h
deleted file mode 100644
index d49d940864..0000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_pci.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* orinoco_pci.h
- *
- * Common code for all Orinoco drivers for PCI devices, including
- * both native PCI and PCMCIA-to-PCI bridges.
- *
- * Copyright (C) 2005, Pavel Roskin.
- * See main.c for license.
- */
-
-#ifndef _ORINOCO_PCI_H
-#define _ORINOCO_PCI_H
-
-#include <linux/netdevice.h>
-
-/* Driver specific data */
-struct orinoco_pci_card {
-	void __iomem *bridge_io;
-	void __iomem *attr_io;
-};
-
-static int __maybe_unused orinoco_pci_suspend(struct device *dev_d)
-{
-	struct pci_dev *pdev = to_pci_dev(dev_d);
-	struct orinoco_private *priv = pci_get_drvdata(pdev);
-
-	orinoco_down(priv);
-	free_irq(pdev->irq, priv);
-
-	return 0;
-}
-
-static int __maybe_unused orinoco_pci_resume(struct device *dev_d)
-{
-	struct pci_dev *pdev = to_pci_dev(dev_d);
-	struct orinoco_private *priv = pci_get_drvdata(pdev);
-	struct net_device *dev = priv->ndev;
-	int err;
-
-	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
-			  dev->name, priv);
-	if (err) {
-		printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
-		       dev->name);
-		return -EBUSY;
-	}
-
-	return orinoco_up(priv);
-}
-
-static SIMPLE_DEV_PM_OPS(orinoco_pci_pm_ops,
-			 orinoco_pci_suspend,
-			 orinoco_pci_resume);
-
-#endif /* _ORINOCO_PCI_H */
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_plx.c b/drivers/net/wireless/intersil/orinoco/orinoco_plx.c
deleted file mode 100644
index 73e6ae1240..0000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_plx.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/* orinoco_plx.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a PLX9052.
- *
- * Current maintainers are:
- *	Pavel Roskin <proski AT gnu.org>
- * and	David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- * Copyright (C) 2001 Daniel Barlow
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * Here's the general details on how the PLX9052 adapter works:
- *
- * - Two PCI I/O address spaces, one 0x80 long which contains the
- * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA
- * slot I/O address space.
- *
- * - One PCI memory address space, mapped to the PCMCIA attribute space
- * (containing the CIS).
- *
- * Using the later, you can read through the CIS data to make sure the
- * card is compatible with the driver. Keep in mind that the PCMCIA
- * spec specifies the CIS as the lower 8 bits of each word read from
- * the CIS, so to read the bytes of the CIS, read every other byte
- * (0,2,4,...). Passing that test, you need to enable the I/O address
- * space on the PCMCIA card via the PCMCIA COR register. This is the
- * first byte following the CIS. In my case (which may not have any
- * relation to what's on the PRISM2 cards), COR was at offset 0x800
- * within the PCI memory space. Write 0x41 to the COR register to
- * enable I/O mode and to select level triggered interrupts. To
- * confirm you actually succeeded, read the COR register back and make
- * sure it actually got set to 0x41, in case you have an unexpected
- * card inserted.
- *
- * Following that, you can treat the second PCI I/O address space (the
- * one that's not 0x80 in length) as the PCMCIA I/O space.
- *
- * Note that in the Eumitcom's source for their drivers, they register
- * the interrupt as edge triggered when registering it with the
- * Windows kernel. I don't recall how to register edge triggered on
- * Linux (if it can be done at all). But in some experimentation, I
- * don't see much operational difference between using either
- * interrupt mode. Don't mess with the interrupt mode in the COR
- * register though, as the PLX9052 wants level triggers with the way
- * the serial EEPROM configures it on the WL11000.
- *
- * There's some other little quirks related to timing that I bumped
- * into, but I don't recall right now. Also, there's two variants of
- * the WL11000 I've seen, revision A1 and T2. These seem to differ
- * slightly in the timings configured in the wait-state generator in
- * the PLX9052. There have also been some comments from Eumitcom that
- * cards shouldn't be hot swapped, apparently due to risk of cooking
- * the PLX9052. I'm unsure why they believe this, as I can't see
- * anything in the design that would really cause a problem, except
- * for crashing drivers not written to expect it. And having developed
- * drivers for the WL11000, I'd say it's quite tricky to write code
- * that will successfully deal with a hot unplug. Very odd things
- * happen on the I/O side of things. But anyway, be warned. Despite
- * that, I've hot-swapped a number of times during debugging and
- * driver development for various reasons (stuck WAIT# line after the
- * radio card's firmware locks up).
- */
-
-#define DRIVER_NAME "orinoco_plx"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_OFFSET	(0x3e0)	/* COR attribute offset of Prism2 PC card */
-#define COR_VALUE	(COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-#define COR_RESET     (0x80)	/* reset bit in the COR register */
-#define PLX_RESET_TIME	(500)	/* milliseconds */
-
-#define PLX_INTCSR		0x4c /* Interrupt Control & Status Register */
-#define PLX_INTCSR_INTEN	(1 << 6) /* Interrupt Enable bit */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- */
-static int orinoco_plx_cor_reset(struct orinoco_private *priv)
-{
-	struct hermes *hw = &priv->hw;
-	struct orinoco_pci_card *card = priv->card;
-	unsigned long timeout;
-	u16 reg;
-
-	iowrite8(COR_VALUE | COR_RESET, card->attr_io + COR_OFFSET);
-	mdelay(1);
-
-	iowrite8(COR_VALUE, card->attr_io + COR_OFFSET);
-	mdelay(1);
-
-	/* Just in case, wait more until the card is no longer busy */
-	timeout = jiffies + msecs_to_jiffies(PLX_RESET_TIME);
-	reg = hermes_read_regn(hw, CMD);
-	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
-		mdelay(1);
-		reg = hermes_read_regn(hw, CMD);
-	}
-
-	/* Still busy? */
-	if (reg & HERMES_CMD_BUSY) {
-		printk(KERN_ERR PFX "Busy timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static int orinoco_plx_hw_init(struct orinoco_pci_card *card)
-{
-	int i;
-	u32 csr_reg;
-	static const u8 cis_magic[] = {
-		0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67
-	};
-
-	printk(KERN_DEBUG PFX "CIS: ");
-	for (i = 0; i < 16; i++)
-		printk("%02X:", ioread8(card->attr_io + (i << 1)));
-	printk("\n");
-
-	/* Verify whether a supported PC card is present */
-	/* FIXME: we probably need to be smarted about this */
-	for (i = 0; i < sizeof(cis_magic); i++) {
-		if (cis_magic[i] != ioread8(card->attr_io + (i << 1))) {
-			printk(KERN_ERR PFX "The CIS value of Prism2 PC "
-			       "card is unexpected\n");
-			return -ENODEV;
-		}
-	}
-
-	/* bjoern: We need to tell the card to enable interrupts, in
-	   case the serial eprom didn't do this already.  See the
-	   PLX9052 data book, p8-1 and 8-24 for reference. */
-	csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
-	if (!(csr_reg & PLX_INTCSR_INTEN)) {
-		csr_reg |= PLX_INTCSR_INTEN;
-		iowrite32(csr_reg, card->bridge_io + PLX_INTCSR);
-		csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
-		if (!(csr_reg & PLX_INTCSR_INTEN)) {
-			printk(KERN_ERR PFX "Cannot enable interrupts\n");
-			return -EIO;
-		}
-	}
-
-	return 0;
-}
-
-static int orinoco_plx_init_one(struct pci_dev *pdev,
-				const struct pci_device_id *ent)
-{
-	int err;
-	struct orinoco_private *priv;
-	struct orinoco_pci_card *card;
-	void __iomem *hermes_io, *attr_io, *bridge_io;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot enable PCI device\n");
-		return err;
-	}
-
-	err = pci_request_regions(pdev, DRIVER_NAME);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
-		goto fail_resources;
-	}
-
-	bridge_io = pci_iomap(pdev, 1, 0);
-	if (!bridge_io) {
-		printk(KERN_ERR PFX "Cannot map bridge registers\n");
-		err = -EIO;
-		goto fail_map_bridge;
-	}
-
-	attr_io = pci_iomap(pdev, 2, 0);
-	if (!attr_io) {
-		printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
-		err = -EIO;
-		goto fail_map_attr;
-	}
-
-	hermes_io = pci_iomap(pdev, 3, 0);
-	if (!hermes_io) {
-		printk(KERN_ERR PFX "Cannot map chipset registers\n");
-		err = -EIO;
-		goto fail_map_hermes;
-	}
-
-	/* Allocate network device */
-	priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
-				orinoco_plx_cor_reset, NULL);
-	if (!priv) {
-		printk(KERN_ERR PFX "Cannot allocate network device\n");
-		err = -ENOMEM;
-		goto fail_alloc;
-	}
-
-	card = priv->card;
-	card->bridge_io = bridge_io;
-	card->attr_io = attr_io;
-
-	hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
-	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
-			  DRIVER_NAME, priv);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
-		err = -EBUSY;
-		goto fail_irq;
-	}
-
-	err = orinoco_plx_hw_init(card);
-	if (err) {
-		printk(KERN_ERR PFX "Hardware initialization failed\n");
-		goto fail;
-	}
-
-	err = orinoco_plx_cor_reset(priv);
-	if (err) {
-		printk(KERN_ERR PFX "Initial reset failed\n");
-		goto fail;
-	}
-
-	err = orinoco_init(priv);
-	if (err) {
-		printk(KERN_ERR PFX "orinoco_init() failed\n");
-		goto fail;
-	}
-
-	err = orinoco_if_add(priv, 0, 0, NULL);
-	if (err) {
-		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
-		goto fail_wiphy;
-	}
-
-	pci_set_drvdata(pdev, priv);
-
-	return 0;
-
- fail_wiphy:
-	wiphy_unregister(priv_to_wiphy(priv));
- fail:
-	free_irq(pdev->irq, priv);
-
- fail_irq:
-	free_orinocodev(priv);
-
- fail_alloc:
-	pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
-	pci_iounmap(pdev, attr_io);
-
- fail_map_attr:
-	pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
-	pci_release_regions(pdev);
-
- fail_resources:
-	pci_disable_device(pdev);
-
-	return err;
-}
-
-static void orinoco_plx_remove_one(struct pci_dev *pdev)
-{
-	struct orinoco_private *priv = pci_get_drvdata(pdev);
-	struct orinoco_pci_card *card = priv->card;
-
-	orinoco_if_del(priv);
-	wiphy_unregister(priv_to_wiphy(priv));
-	free_irq(pdev->irq, priv);
-	free_orinocodev(priv);
-	pci_iounmap(pdev, priv->hw.iobase);
-	pci_iounmap(pdev, card->attr_io);
-	pci_iounmap(pdev, card->bridge_io);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-static const struct pci_device_id orinoco_plx_id_table[] = {
-	{0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,},	/* Siemens SpeedStream SS1023 */
-	{0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,},	/* Netgear MA301 */
-	{0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,},	/* Correga  - does this work? */
-	{0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,},	/* SMC EZConnect SMC2602W,
-							   Eumitcom PCI WL11000,
-							   Addtron AWA-100 */
-	{0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,},	/* Global Sun Tech GL24110P */
-	{0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,},	/* Reported working, but unknown */
-	{0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,},	/* Linksys WDT11 */
-	{0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,},	/* USR 2415 */
-	{0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,},	/* Belkin F5D6000 tested by
-							   Brendan W. McAdams <rit AT jacked-in.org> */
-	{0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,},	/* 3Com AirConnect PCI tested by
-							   Damien Persohn <damien AT persohn.net> */
-	{0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_plx_id_table);
-
-static struct pci_driver orinoco_plx_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= orinoco_plx_id_table,
-	.probe		= orinoco_plx_init_one,
-	.remove		= orinoco_plx_remove_one,
-	.driver.pm	= &orinoco_pci_pm_ops,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (Pavel Roskin <proski@gnu.org>,"
-	" David Gibson <hermes@gibson.dropbear.id.au>,"
-	" Daniel Barlow <dan@telent.net>)";
-MODULE_AUTHOR("Daniel Barlow <dan@telent.net>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_plx_init(void)
-{
-	printk(KERN_DEBUG "%s\n", version);
-	return pci_register_driver(&orinoco_plx_driver);
-}
-
-static void __exit orinoco_plx_exit(void)
-{
-	pci_unregister_driver(&orinoco_plx_driver);
-}
-
-module_init(orinoco_plx_init);
-module_exit(orinoco_plx_exit);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c b/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
deleted file mode 100644
index 939d5a1dce..0000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* orinoco_tmd.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a TMD7160.
- *
- * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
- * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * The actual driving is done by main.c, this is just resource
- * allocation stuff.
- *
- * This driver is modeled after the orinoco_plx driver. The main
- * difference is that the TMD chip has only IO port ranges and doesn't
- * provide access to the PCMCIA attribute space.
- *
- * Pheecom sells cards with the TMD chip as "ASIC version"
- */
-
-#define DRIVER_NAME "orinoco_tmd"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_VALUE	(COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-#define COR_RESET     (0x80)	/* reset bit in the COR register */
-#define TMD_RESET_TIME	(500)	/* milliseconds */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- */
-static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
-{
-	struct hermes *hw = &priv->hw;
-	struct orinoco_pci_card *card = priv->card;
-	unsigned long timeout;
-	u16 reg;
-
-	iowrite8(COR_VALUE | COR_RESET, card->bridge_io);
-	mdelay(1);
-
-	iowrite8(COR_VALUE, card->bridge_io);
-	mdelay(1);
-
-	/* Just in case, wait more until the card is no longer busy */
-	timeout = jiffies + msecs_to_jiffies(TMD_RESET_TIME);
-	reg = hermes_read_regn(hw, CMD);
-	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
-		mdelay(1);
-		reg = hermes_read_regn(hw, CMD);
-	}
-
-	/* Still busy? */
-	if (reg & HERMES_CMD_BUSY) {
-		printk(KERN_ERR PFX "Busy timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-
-static int orinoco_tmd_init_one(struct pci_dev *pdev,
-				const struct pci_device_id *ent)
-{
-	int err;
-	struct orinoco_private *priv;
-	struct orinoco_pci_card *card;
-	void __iomem *hermes_io, *bridge_io;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot enable PCI device\n");
-		return err;
-	}
-
-	err = pci_request_regions(pdev, DRIVER_NAME);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
-		goto fail_resources;
-	}
-
-	bridge_io = pci_iomap(pdev, 1, 0);
-	if (!bridge_io) {
-		printk(KERN_ERR PFX "Cannot map bridge registers\n");
-		err = -EIO;
-		goto fail_map_bridge;
-	}
-
-	hermes_io = pci_iomap(pdev, 2, 0);
-	if (!hermes_io) {
-		printk(KERN_ERR PFX "Cannot map chipset registers\n");
-		err = -EIO;
-		goto fail_map_hermes;
-	}
-
-	/* Allocate network device */
-	priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
-				orinoco_tmd_cor_reset, NULL);
-	if (!priv) {
-		printk(KERN_ERR PFX "Cannot allocate network device\n");
-		err = -ENOMEM;
-		goto fail_alloc;
-	}
-
-	card = priv->card;
-	card->bridge_io = bridge_io;
-
-	hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
-	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
-			  DRIVER_NAME, priv);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
-		err = -EBUSY;
-		goto fail_irq;
-	}
-
-	err = orinoco_tmd_cor_reset(priv);
-	if (err) {
-		printk(KERN_ERR PFX "Initial reset failed\n");
-		goto fail;
-	}
-
-	err = orinoco_init(priv);
-	if (err) {
-		printk(KERN_ERR PFX "orinoco_init() failed\n");
-		goto fail;
-	}
-
-	err = orinoco_if_add(priv, 0, 0, NULL);
-	if (err) {
-		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
-		goto fail;
-	}
-
-	pci_set_drvdata(pdev, priv);
-
-	return 0;
-
- fail:
-	free_irq(pdev->irq, priv);
-
- fail_irq:
-	free_orinocodev(priv);
-
- fail_alloc:
-	pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
-	pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
-	pci_release_regions(pdev);
-
- fail_resources:
-	pci_disable_device(pdev);
-
-	return err;
-}
-
-static void orinoco_tmd_remove_one(struct pci_dev *pdev)
-{
-	struct orinoco_private *priv = pci_get_drvdata(pdev);
-	struct orinoco_pci_card *card = priv->card;
-
-	orinoco_if_del(priv);
-	free_irq(pdev->irq, priv);
-	free_orinocodev(priv);
-	pci_iounmap(pdev, priv->hw.iobase);
-	pci_iounmap(pdev, card->bridge_io);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-static const struct pci_device_id orinoco_tmd_id_table[] = {
-	{0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,},      /* NDC and OEMs, e.g. pheecom */
-	{0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table);
-
-static struct pci_driver orinoco_tmd_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= orinoco_tmd_id_table,
-	.probe		= orinoco_tmd_init_one,
-	.remove		= orinoco_tmd_remove_one,
-	.driver.pm	= &orinoco_pci_pm_ops,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (Joerg Dorchain <joerg@dorchain.net>)";
-MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_tmd_init(void)
-{
-	printk(KERN_DEBUG "%s\n", version);
-	return pci_register_driver(&orinoco_tmd_driver);
-}
-
-static void __exit orinoco_tmd_exit(void)
-{
-	pci_unregister_driver(&orinoco_tmd_driver);
-}
-
-module_init(orinoco_tmd_init);
-module_exit(orinoco_tmd_exit);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
deleted file mode 100644
index 866e0230df..0000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
+++ /dev/null
@@ -1,1787 +0,0 @@
-/*
- * USB Orinoco driver
- *
- * Copyright (c) 2003 Manuel Estrada Sainz
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * Queueing code based on linux-wlan-ng 0.2.1-pre5
- *
- * Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
- *
- *	The license is the same as above.
- *
- * Initialy based on USB Skeleton driver - 0.7
- *
- * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- *
- * NOTE: The original USB Skeleton driver is GPL, but all that code is
- * gone so MPL/GPL applies.
- */
-
-#define DRIVER_NAME "orinoco_usb"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/fcntl.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/timer.h>
-
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/wireless.h>
-#include <linux/firmware.h>
-#include <linux/refcount.h>
-
-#include "mic.h"
-#include "orinoco.h"
-
-#ifndef URB_ASYNC_UNLINK
-#define URB_ASYNC_UNLINK 0
-#endif
-
-struct header_struct {
-	/* 802.3 */
-	u8 dest[ETH_ALEN];
-	u8 src[ETH_ALEN];
-	__be16 len;
-	/* 802.2 */
-	u8 dsap;
-	u8 ssap;
-	u8 ctrl;
-	/* SNAP */
-	u8 oui[3];
-	__be16 ethertype;
-} __packed;
-
-struct ez_usb_fw {
-	u16 size;
-	const u8 *code;
-};
-
-static struct ez_usb_fw firmware = {
-	.size = 0,
-	.code = NULL,
-};
-
-/* Debugging macros */
-#undef err
-#define err(format, arg...) \
-	do { printk(KERN_ERR PFX format "\n", ## arg); } while (0)
-
-MODULE_FIRMWARE("orinoco_ezusb_fw");
-
-/*
- * Under some conditions, the card gets stuck and stops paying attention
- * to the world (i.e. data communication stalls) until we do something to
- * it.  Sending an INQ_TALLIES command seems to be enough and should be
- * harmless otherwise.  This behaviour has been observed when using the
- * driver on a systemimager client during installation.  In the past a
- * timer was used to send INQ_TALLIES commands when there was no other
- * activity, but it was troublesome and was removed.
- */
-
-#define USB_COMPAQ_VENDOR_ID     0x049f /* Compaq Computer Corp. */
-#define USB_COMPAQ_WL215_ID      0x001f /* Compaq WL215 USB Adapter */
-#define USB_COMPAQ_W200_ID       0x0076 /* Compaq W200 USB Adapter */
-#define USB_HP_WL215_ID          0x0082 /* Compaq WL215 USB Adapter */
-
-#define USB_MELCO_VENDOR_ID      0x0411
-#define USB_BUFFALO_L11_ID       0x0006 /* BUFFALO WLI-USB-L11 */
-#define USB_BUFFALO_L11G_WR_ID   0x000B /* BUFFALO WLI-USB-L11G-WR */
-#define USB_BUFFALO_L11G_ID      0x000D /* BUFFALO WLI-USB-L11G */
-
-#define USB_LUCENT_VENDOR_ID     0x047E /* Lucent Technologies */
-#define USB_LUCENT_ORINOCO_ID    0x0300 /* Lucent/Agere Orinoco USB Client */
-
-#define USB_AVAYA8_VENDOR_ID     0x0D98
-#define USB_AVAYAE_VENDOR_ID     0x0D9E
-#define USB_AVAYA_WIRELESS_ID    0x0300 /* Avaya USB Wireless Card */
-
-#define USB_AGERE_VENDOR_ID      0x0D4E /* Agere Systems */
-#define USB_AGERE_MODEL0801_ID   0x1000 /* USB Wireless Card Model 0801 */
-#define USB_AGERE_MODEL0802_ID   0x1001 /* USB Wireless Card Model 0802 */
-#define USB_AGERE_REBRANDED_ID   0x047A /* USB WLAN Card */
-
-#define USB_ELSA_VENDOR_ID       0x05CC
-#define USB_ELSA_AIRLANCER_ID    0x3100 /* ELSA AirLancer USB-11 */
-
-#define USB_LEGEND_VENDOR_ID     0x0E7C
-#define USB_LEGEND_JOYNET_ID     0x0300 /* Joynet USB WLAN Card */
-
-#define USB_SAMSUNG_VENDOR_ID    0x04E8
-#define USB_SAMSUNG_SEW2001U1_ID 0x5002 /* Samsung SEW-2001u Card */
-#define USB_SAMSUNG_SEW2001U2_ID 0x5B11 /* Samsung SEW-2001u Card */
-#define USB_SAMSUNG_SEW2003U_ID  0x7011 /* Samsung SEW-2003U Card */
-
-#define USB_IGATE_VENDOR_ID      0x0681
-#define USB_IGATE_IGATE_11M_ID   0x0012 /* I-GATE 11M USB Card */
-
-#define USB_FUJITSU_VENDOR_ID    0x0BF8
-#define USB_FUJITSU_E1100_ID     0x1002 /* connect2AIR WLAN E-1100 USB */
-
-#define USB_2WIRE_VENDOR_ID      0x1630
-#define USB_2WIRE_WIRELESS_ID    0xff81 /* 2Wire USB Wireless adapter */
-
-
-#define EZUSB_REQUEST_FW_TRANS		0xA0
-#define EZUSB_REQUEST_TRIGGER		0xAA
-#define EZUSB_REQUEST_TRIG_AC		0xAC
-#define EZUSB_CPUCS_REG			0x7F92
-
-#define EZUSB_RID_TX			0x0700
-#define EZUSB_RID_RX			0x0701
-#define EZUSB_RID_INIT1			0x0702
-#define EZUSB_RID_ACK			0x0710
-#define EZUSB_RID_READ_PDA		0x0800
-#define EZUSB_RID_PROG_INIT		0x0852
-#define EZUSB_RID_PROG_SET_ADDR		0x0853
-#define EZUSB_RID_PROG_BYTES		0x0854
-#define EZUSB_RID_PROG_END		0x0855
-#define EZUSB_RID_DOCMD			0x0860
-
-/* Recognize info frames */
-#define EZUSB_IS_INFO(id)		((id >= 0xF000) && (id <= 0xF2FF))
-
-#define EZUSB_MAGIC			0x0210
-
-#define EZUSB_FRAME_DATA		1
-#define EZUSB_FRAME_CONTROL		2
-
-#define DEF_TIMEOUT			(3 * HZ)
-
-#define BULK_BUF_SIZE			2048
-
-#define MAX_DL_SIZE (BULK_BUF_SIZE - sizeof(struct ezusb_packet))
-
-#define FW_BUF_SIZE			64
-#define FW_VAR_OFFSET_PTR		0x359
-#define FW_VAR_VALUE			0
-#define FW_HOLE_START			0x100
-#define FW_HOLE_END			0x300
-
-struct ezusb_packet {
-	__le16 magic;		/* 0x0210 */
-	u8 req_reply_count;
-	u8 ans_reply_count;
-	__le16 frame_type;	/* 0x01 for data frames, 0x02 otherwise */
-	__le16 size;		/* transport size */
-	__le16 crc;		/* CRC up to here */
-	__le16 hermes_len;
-	__le16 hermes_rid;
-	u8 data[];
-} __packed;
-
-/* Table of devices that work or may work with this driver */
-static const struct usb_device_id ezusb_table[] = {
-	{USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_WL215_ID)},
-	{USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_HP_WL215_ID)},
-	{USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_W200_ID)},
-	{USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11_ID)},
-	{USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_WR_ID)},
-	{USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_ID)},
-	{USB_DEVICE(USB_LUCENT_VENDOR_ID, USB_LUCENT_ORINOCO_ID)},
-	{USB_DEVICE(USB_AVAYA8_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
-	{USB_DEVICE(USB_AVAYAE_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
-	{USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0801_ID)},
-	{USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0802_ID)},
-	{USB_DEVICE(USB_ELSA_VENDOR_ID, USB_ELSA_AIRLANCER_ID)},
-	{USB_DEVICE(USB_LEGEND_VENDOR_ID, USB_LEGEND_JOYNET_ID)},
-	{USB_DEVICE_VER(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U1_ID,
-			0, 0)},
-	{USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U2_ID)},
-	{USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2003U_ID)},
-	{USB_DEVICE(USB_IGATE_VENDOR_ID, USB_IGATE_IGATE_11M_ID)},
-	{USB_DEVICE(USB_FUJITSU_VENDOR_ID, USB_FUJITSU_E1100_ID)},
-	{USB_DEVICE(USB_2WIRE_VENDOR_ID, USB_2WIRE_WIRELESS_ID)},
-	{USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_REBRANDED_ID)},
-	{}			/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, ezusb_table);
-
-/* Structure to hold all of our device specific stuff */
-struct ezusb_priv {
-	struct usb_device *udev;
-	struct net_device *dev;
-	struct mutex mtx;
-	spinlock_t req_lock;
-	struct list_head req_pending;
-	struct list_head req_active;
-	spinlock_t reply_count_lock;
-	u16 hermes_reg_fake[0x40];
-	u8 *bap_buf;
-	struct urb *read_urb;
-	int read_pipe;
-	int write_pipe;
-	u8 reply_count;
-};
-
-enum ezusb_state {
-	EZUSB_CTX_START,
-	EZUSB_CTX_QUEUED,
-	EZUSB_CTX_REQ_SUBMITTED,
-	EZUSB_CTX_REQ_COMPLETE,
-	EZUSB_CTX_RESP_RECEIVED,
-	EZUSB_CTX_REQ_TIMEOUT,
-	EZUSB_CTX_REQ_FAILED,
-	EZUSB_CTX_RESP_TIMEOUT,
-	EZUSB_CTX_REQSUBMIT_FAIL,
-	EZUSB_CTX_COMPLETE,
-};
-
-struct request_context {
-	struct list_head list;
-	refcount_t refcount;
-	struct completion done;	/* Signals that CTX is dead */
-	int killed;
-	struct urb *outurb;	/* OUT for req pkt */
-	struct ezusb_priv *upriv;
-	struct ezusb_packet *buf;
-	int buf_length;
-	struct timer_list timer;	/* Timeout handling */
-	enum ezusb_state state;	/* Current state */
-	/* the RID that we will wait for */
-	u16 out_rid;
-	u16 in_rid;
-};
-
-
-/* Forward declarations */
-static void ezusb_ctx_complete(struct request_context *ctx);
-static void ezusb_req_queue_run(struct ezusb_priv *upriv);
-static void ezusb_bulk_in_callback(struct urb *urb);
-
-static inline u8 ezusb_reply_inc(u8 count)
-{
-	if (count < 0x7F)
-		return count + 1;
-	else
-		return 1;
-}
-
-static void ezusb_request_context_put(struct request_context *ctx)
-{
-	if (!refcount_dec_and_test(&ctx->refcount))
-		return;
-
-	WARN_ON(!ctx->done.done);
-	BUG_ON(ctx->outurb->status == -EINPROGRESS);
-	BUG_ON(timer_pending(&ctx->timer));
-	usb_free_urb(ctx->outurb);
-	kfree(ctx->buf);
-	kfree(ctx);
-}
-
-static inline void ezusb_mod_timer(struct ezusb_priv *upriv,
-				   struct timer_list *timer,
-				   unsigned long expire)
-{
-	if (!upriv->udev)
-		return;
-	mod_timer(timer, expire);
-}
-
-static void ezusb_request_timerfn(struct timer_list *t)
-{
-	struct request_context *ctx = from_timer(ctx, t, timer);
-
-	ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
-	if (usb_unlink_urb(ctx->outurb) == -EINPROGRESS) {
-		ctx->state = EZUSB_CTX_REQ_TIMEOUT;
-	} else {
-		ctx->state = EZUSB_CTX_RESP_TIMEOUT;
-		dev_dbg(&ctx->outurb->dev->dev, "couldn't unlink\n");
-		refcount_inc(&ctx->refcount);
-		ctx->killed = 1;
-		ezusb_ctx_complete(ctx);
-		ezusb_request_context_put(ctx);
-	}
-};
-
-static struct request_context *ezusb_alloc_ctx(struct ezusb_priv *upriv,
-					       u16 out_rid, u16 in_rid)
-{
-	struct request_context *ctx;
-
-	ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC);
-	if (!ctx)
-		return NULL;
-
-	ctx->buf = kmalloc(BULK_BUF_SIZE, GFP_ATOMIC);
-	if (!ctx->buf) {
-		kfree(ctx);
-		return NULL;
-	}
-	ctx->outurb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!ctx->outurb) {
-		kfree(ctx->buf);
-		kfree(ctx);
-		return NULL;
-	}
-
-	ctx->upriv = upriv;
-	ctx->state = EZUSB_CTX_START;
-	ctx->out_rid = out_rid;
-	ctx->in_rid = in_rid;
-
-	refcount_set(&ctx->refcount, 1);
-	init_completion(&ctx->done);
-
-	timer_setup(&ctx->timer, ezusb_request_timerfn, 0);
-	return ctx;
-}
-
-static void ezusb_ctx_complete(struct request_context *ctx)
-{
-	struct ezusb_priv *upriv = ctx->upriv;
-	unsigned long flags;
-
-	spin_lock_irqsave(&upriv->req_lock, flags);
-
-	list_del_init(&ctx->list);
-	if (upriv->udev) {
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-		ezusb_req_queue_run(upriv);
-		spin_lock_irqsave(&upriv->req_lock, flags);
-	}
-
-	switch (ctx->state) {
-	case EZUSB_CTX_COMPLETE:
-	case EZUSB_CTX_REQSUBMIT_FAIL:
-	case EZUSB_CTX_REQ_FAILED:
-	case EZUSB_CTX_REQ_TIMEOUT:
-	case EZUSB_CTX_RESP_TIMEOUT:
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-
-		if ((ctx->out_rid == EZUSB_RID_TX) && upriv->dev) {
-			struct net_device *dev = upriv->dev;
-			struct net_device_stats *stats = &dev->stats;
-
-			if (ctx->state != EZUSB_CTX_COMPLETE)
-				stats->tx_errors++;
-			else
-				stats->tx_packets++;
-
-			netif_wake_queue(dev);
-		}
-		complete_all(&ctx->done);
-		ezusb_request_context_put(ctx);
-		break;
-
-	default:
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-		if (!upriv->udev) {
-			/* This is normal, as all request contexts get flushed
-			 * when the device is disconnected */
-			err("Called, CTX not terminating, but device gone");
-			complete_all(&ctx->done);
-			ezusb_request_context_put(ctx);
-			break;
-		}
-
-		err("Called, CTX not in terminating state.");
-		/* Things are really bad if this happens. Just leak
-		 * the CTX because it may still be linked to the
-		 * queue or the OUT urb may still be active.
-		 * Just leaking at least prevents an Oops or Panic.
-		 */
-		break;
-	}
-}
-
-/*
- * ezusb_req_queue_run:
- * Description:
- *	Note: Only one active CTX at any one time, because there's no
- *	other (reliable) way to match the response URB to the correct
- *	CTX.
- */
-static void ezusb_req_queue_run(struct ezusb_priv *upriv)
-{
-	unsigned long flags;
-	struct request_context *ctx;
-	int result;
-
-	spin_lock_irqsave(&upriv->req_lock, flags);
-
-	if (!list_empty(&upriv->req_active))
-		goto unlock;
-
-	if (list_empty(&upriv->req_pending))
-		goto unlock;
-
-	ctx =
-	    list_entry(upriv->req_pending.next, struct request_context,
-		       list);
-
-	if (!ctx->upriv->udev)
-		goto unlock;
-
-	/* We need to split this off to avoid a race condition */
-	list_move_tail(&ctx->list, &upriv->req_active);
-
-	if (ctx->state == EZUSB_CTX_QUEUED) {
-		refcount_inc(&ctx->refcount);
-		result = usb_submit_urb(ctx->outurb, GFP_ATOMIC);
-		if (result) {
-			ctx->state = EZUSB_CTX_REQSUBMIT_FAIL;
-
-			spin_unlock_irqrestore(&upriv->req_lock, flags);
-
-			err("Fatal, failed to submit command urb."
-			    " error=%d\n", result);
-
-			ezusb_ctx_complete(ctx);
-			ezusb_request_context_put(ctx);
-			goto done;
-		}
-
-		ctx->state = EZUSB_CTX_REQ_SUBMITTED;
-		ezusb_mod_timer(ctx->upriv, &ctx->timer,
-				jiffies + DEF_TIMEOUT);
-	}
-
- unlock:
-	spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- done:
-	return;
-}
-
-static void ezusb_req_enqueue_run(struct ezusb_priv *upriv,
-				  struct request_context *ctx)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&upriv->req_lock, flags);
-
-	if (!ctx->upriv->udev) {
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-		goto done;
-	}
-	refcount_inc(&ctx->refcount);
-	list_add_tail(&ctx->list, &upriv->req_pending);
-	spin_unlock_irqrestore(&upriv->req_lock, flags);
-
-	ctx->state = EZUSB_CTX_QUEUED;
-	ezusb_req_queue_run(upriv);
-
- done:
-	return;
-}
-
-static void ezusb_request_out_callback(struct urb *urb)
-{
-	unsigned long flags;
-	enum ezusb_state state;
-	struct request_context *ctx = urb->context;
-	struct ezusb_priv *upriv = ctx->upriv;
-
-	spin_lock_irqsave(&upriv->req_lock, flags);
-
-	del_timer(&ctx->timer);
-
-	if (ctx->killed) {
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-		pr_warn("interrupt called with dead ctx\n");
-		goto out;
-	}
-
-	state = ctx->state;
-
-	if (urb->status == 0) {
-		switch (state) {
-		case EZUSB_CTX_REQ_SUBMITTED:
-			if (ctx->in_rid) {
-				ctx->state = EZUSB_CTX_REQ_COMPLETE;
-				/* reply URB still pending */
-				ezusb_mod_timer(upriv, &ctx->timer,
-						jiffies + DEF_TIMEOUT);
-				spin_unlock_irqrestore(&upriv->req_lock,
-						       flags);
-				break;
-			}
-			fallthrough;
-		case EZUSB_CTX_RESP_RECEIVED:
-			/* IN already received before this OUT-ACK */
-			ctx->state = EZUSB_CTX_COMPLETE;
-			spin_unlock_irqrestore(&upriv->req_lock, flags);
-			ezusb_ctx_complete(ctx);
-			break;
-
-		default:
-			spin_unlock_irqrestore(&upriv->req_lock, flags);
-			err("Unexpected state(0x%x, %d) in OUT URB",
-			    state, urb->status);
-			break;
-		}
-	} else {
-		/* If someone cancels the OUT URB then its status
-		 * should be either -ECONNRESET or -ENOENT.
-		 */
-		switch (state) {
-		case EZUSB_CTX_REQ_SUBMITTED:
-		case EZUSB_CTX_RESP_RECEIVED:
-			ctx->state = EZUSB_CTX_REQ_FAILED;
-			fallthrough;
-
-		case EZUSB_CTX_REQ_FAILED:
-		case EZUSB_CTX_REQ_TIMEOUT:
-			spin_unlock_irqrestore(&upriv->req_lock, flags);
-
-			ezusb_ctx_complete(ctx);
-			break;
-
-		default:
-			spin_unlock_irqrestore(&upriv->req_lock, flags);
-
-			err("Unexpected state(0x%x, %d) in OUT URB",
-			    state, urb->status);
-			break;
-		}
-	}
- out:
-	ezusb_request_context_put(ctx);
-}
-
-static void ezusb_request_in_callback(struct ezusb_priv *upriv,
-				      struct urb *urb)
-{
-	struct ezusb_packet *ans = urb->transfer_buffer;
-	struct request_context *ctx = NULL;
-	enum ezusb_state state;
-	unsigned long flags;
-
-	/* Find the CTX on the active queue that requested this URB */
-	spin_lock_irqsave(&upriv->req_lock, flags);
-	if (upriv->udev) {
-		struct list_head *item;
-
-		list_for_each(item, &upriv->req_active) {
-			struct request_context *c;
-			int reply_count;
-
-			c = list_entry(item, struct request_context, list);
-			reply_count =
-			    ezusb_reply_inc(c->buf->req_reply_count);
-			if ((ans->ans_reply_count == reply_count)
-			    && (le16_to_cpu(ans->hermes_rid) == c->in_rid)) {
-				ctx = c;
-				break;
-			}
-			netdev_dbg(upriv->dev, "Skipped (0x%x/0x%x) (%d/%d)\n",
-				   le16_to_cpu(ans->hermes_rid), c->in_rid,
-				   ans->ans_reply_count, reply_count);
-		}
-	}
-
-	if (ctx == NULL) {
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-		err("%s: got unexpected RID: 0x%04X", __func__,
-		    le16_to_cpu(ans->hermes_rid));
-		ezusb_req_queue_run(upriv);
-		return;
-	}
-
-	/* The data we want is in the in buffer, exchange */
-	urb->transfer_buffer = ctx->buf;
-	ctx->buf = (void *) ans;
-	ctx->buf_length = urb->actual_length;
-
-	state = ctx->state;
-	switch (state) {
-	case EZUSB_CTX_REQ_SUBMITTED:
-		/* We have received our response URB before
-		 * our request has been acknowledged. Do NOT
-		 * destroy our CTX yet, because our OUT URB
-		 * is still alive ...
-		 */
-		ctx->state = EZUSB_CTX_RESP_RECEIVED;
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-
-		/* Let the machine continue running. */
-		break;
-
-	case EZUSB_CTX_REQ_COMPLETE:
-		/* This is the usual path: our request
-		 * has already been acknowledged, and
-		 * we have now received the reply.
-		 */
-		ctx->state = EZUSB_CTX_COMPLETE;
-
-		/* Stop the intimer */
-		del_timer(&ctx->timer);
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-
-		/* Call the completion handler */
-		ezusb_ctx_complete(ctx);
-		break;
-
-	default:
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-
-		pr_warn("Matched IN URB, unexpected context state(0x%x)\n",
-			state);
-		/* Throw this CTX away and try submitting another */
-		del_timer(&ctx->timer);
-		ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
-		usb_unlink_urb(ctx->outurb);
-		ezusb_req_queue_run(upriv);
-		break;
-	}			/* switch */
-}
-
-typedef void (*ezusb_ctx_wait)(struct ezusb_priv *, struct request_context *);
-
-static void ezusb_req_ctx_wait_compl(struct ezusb_priv *upriv,
-				     struct request_context *ctx)
-{
-	switch (ctx->state) {
-	case EZUSB_CTX_QUEUED:
-	case EZUSB_CTX_REQ_SUBMITTED:
-	case EZUSB_CTX_REQ_COMPLETE:
-	case EZUSB_CTX_RESP_RECEIVED:
-		wait_for_completion(&ctx->done);
-		break;
-	default:
-		/* Done or failed - nothing to wait for */
-		break;
-	}
-}
-
-static void ezusb_req_ctx_wait_poll(struct ezusb_priv *upriv,
-				    struct request_context *ctx)
-{
-	int msecs;
-
-	switch (ctx->state) {
-	case EZUSB_CTX_QUEUED:
-	case EZUSB_CTX_REQ_SUBMITTED:
-	case EZUSB_CTX_REQ_COMPLETE:
-	case EZUSB_CTX_RESP_RECEIVED:
-		/* If we get called from a timer or with our lock acquired, then
-		 * we can't wait for the completion and have to poll. This won't
-		 * happen if the USB controller completes the URB requests in
-		 * BH.
-		 */
-		msecs = DEF_TIMEOUT * (1000 / HZ);
-
-		while (!try_wait_for_completion(&ctx->done) && msecs--)
-			udelay(1000);
-		break;
-	default:
-		/* Done or failed - nothing to wait for */
-		break;
-	}
-}
-
-static void ezusb_req_ctx_wait_skip(struct ezusb_priv *upriv,
-				    struct request_context *ctx)
-{
-	WARN(1, "Shouldn't be invoked for in_rid\n");
-}
-
-static inline u16 build_crc(struct ezusb_packet *data)
-{
-	u16 crc = 0;
-	u8 *bytes = (u8 *)data;
-	int i;
-
-	for (i = 0; i < 8; i++)
-		crc = (crc << 1) + bytes[i];
-
-	return crc;
-}
-
-/*
- * ezusb_fill_req:
- *
- * if data == NULL and length > 0 the data is assumed to be already in
- * the target buffer and only the header is filled.
- *
- */
-static int ezusb_fill_req(struct ezusb_packet *req, u16 length, u16 rid,
-			  const void *data, u16 frame_type, u8 reply_count)
-{
-	int total_size = sizeof(*req) + length;
-
-	BUG_ON(total_size > BULK_BUF_SIZE);
-
-	req->magic = cpu_to_le16(EZUSB_MAGIC);
-	req->req_reply_count = reply_count;
-	req->ans_reply_count = 0;
-	req->frame_type = cpu_to_le16(frame_type);
-	req->size = cpu_to_le16(length + 4);
-	req->crc = cpu_to_le16(build_crc(req));
-	req->hermes_len = cpu_to_le16(HERMES_BYTES_TO_RECLEN(length));
-	req->hermes_rid = cpu_to_le16(rid);
-	if (data)
-		memcpy(req->data, data, length);
-	return total_size;
-}
-
-static int ezusb_submit_in_urb(struct ezusb_priv *upriv)
-{
-	int retval = 0;
-	void *cur_buf = upriv->read_urb->transfer_buffer;
-
-	if (upriv->read_urb->status == -EINPROGRESS) {
-		netdev_dbg(upriv->dev, "urb busy, not resubmiting\n");
-		retval = -EBUSY;
-		goto exit;
-	}
-	usb_fill_bulk_urb(upriv->read_urb, upriv->udev, upriv->read_pipe,
-			  cur_buf, BULK_BUF_SIZE,
-			  ezusb_bulk_in_callback, upriv);
-	upriv->read_urb->transfer_flags = 0;
-	retval = usb_submit_urb(upriv->read_urb, GFP_ATOMIC);
-	if (retval)
-		err("%s submit failed %d", __func__, retval);
-
- exit:
-	return retval;
-}
-
-static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset)
-{
-	int ret;
-	u8 *res_val = NULL;
-
-	if (!upriv->udev) {
-		err("%s: !upriv->udev", __func__);
-		return -EFAULT;
-	}
-
-	res_val = kmalloc(sizeof(*res_val), GFP_KERNEL);
-
-	if (!res_val)
-		return -ENOMEM;
-
-	*res_val = reset;	/* avoid argument promotion */
-
-	ret =  usb_control_msg(upriv->udev,
-			       usb_sndctrlpipe(upriv->udev, 0),
-			       EZUSB_REQUEST_FW_TRANS,
-			       USB_TYPE_VENDOR | USB_RECIP_DEVICE |
-			       USB_DIR_OUT, EZUSB_CPUCS_REG, 0, res_val,
-			       sizeof(*res_val), DEF_TIMEOUT);
-
-	kfree(res_val);
-
-	return ret;
-}
-
-static int ezusb_firmware_download(struct ezusb_priv *upriv,
-				   struct ez_usb_fw *fw)
-{
-	u8 *fw_buffer;
-	int retval, addr;
-	int variant_offset;
-
-	fw_buffer = kmalloc(FW_BUF_SIZE, GFP_KERNEL);
-	if (!fw_buffer) {
-		printk(KERN_ERR PFX "Out of memory for firmware buffer.\n");
-		return -ENOMEM;
-	}
-	/*
-	 * This byte is 1 and should be replaced with 0.  The offset is
-	 * 0x10AD in version 0.0.6.  The byte in question should follow
-	 * the end of the code pointed to by the jump in the beginning
-	 * of the firmware.  Also, it is read by code located at 0x358.
-	 */
-	variant_offset = be16_to_cpup((__be16 *) &fw->code[FW_VAR_OFFSET_PTR]);
-	if (variant_offset >= fw->size) {
-		printk(KERN_ERR PFX "Invalid firmware variant offset: "
-		       "0x%04x\n", variant_offset);
-		retval = -EINVAL;
-		goto fail;
-	}
-
-	retval = ezusb_8051_cpucs(upriv, 1);
-	if (retval < 0)
-		goto fail;
-	for (addr = 0; addr < fw->size; addr += FW_BUF_SIZE) {
-		/* 0x100-0x300 should be left alone, it contains card
-		 * specific data, like USB enumeration information */
-		if ((addr >= FW_HOLE_START) && (addr < FW_HOLE_END))
-			continue;
-
-		memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE);
-		if (variant_offset >= addr &&
-		    variant_offset < addr + FW_BUF_SIZE) {
-			netdev_dbg(upriv->dev,
-				   "Patching card_variant byte at 0x%04X\n",
-				   variant_offset);
-			fw_buffer[variant_offset - addr] = FW_VAR_VALUE;
-		}
-		retval = usb_control_msg(upriv->udev,
-					 usb_sndctrlpipe(upriv->udev, 0),
-					 EZUSB_REQUEST_FW_TRANS,
-					 USB_TYPE_VENDOR | USB_RECIP_DEVICE
-					 | USB_DIR_OUT,
-					 addr, 0x0,
-					 fw_buffer, FW_BUF_SIZE,
-					 DEF_TIMEOUT);
-
-		if (retval < 0)
-			goto fail;
-	}
-	retval = ezusb_8051_cpucs(upriv, 0);
-	if (retval < 0)
-		goto fail;
-
-	goto exit;
- fail:
-	printk(KERN_ERR PFX "Firmware download failed, error %d\n",
-	       retval);
- exit:
-	kfree(fw_buffer);
-	return retval;
-}
-
-static int ezusb_access_ltv(struct ezusb_priv *upriv,
-			    struct request_context *ctx,
-			    u16 length, const void *data, u16 frame_type,
-			    void *ans_buff, unsigned ans_size, u16 *ans_length,
-			    ezusb_ctx_wait ezusb_ctx_wait_func)
-{
-	int req_size;
-	int retval = 0;
-	enum ezusb_state state;
-
-	if (!upriv->udev) {
-		retval = -ENODEV;
-		goto exit;
-	}
-
-	if (upriv->read_urb->status != -EINPROGRESS)
-		err("%s: in urb not pending", __func__);
-
-	/* protect upriv->reply_count, guarantee sequential numbers */
-	spin_lock_bh(&upriv->reply_count_lock);
-	req_size = ezusb_fill_req(ctx->buf, length, ctx->out_rid, data,
-				  frame_type, upriv->reply_count);
-	usb_fill_bulk_urb(ctx->outurb, upriv->udev, upriv->write_pipe,
-			  ctx->buf, req_size,
-			  ezusb_request_out_callback, ctx);
-
-	if (ctx->in_rid)
-		upriv->reply_count = ezusb_reply_inc(upriv->reply_count);
-
-	ezusb_req_enqueue_run(upriv, ctx);
-
-	spin_unlock_bh(&upriv->reply_count_lock);
-
-	if (ctx->in_rid)
-		ezusb_ctx_wait_func(upriv, ctx);
-
-	state = ctx->state;
-	switch (state) {
-	case EZUSB_CTX_COMPLETE:
-		retval = ctx->outurb->status;
-		break;
-
-	case EZUSB_CTX_QUEUED:
-	case EZUSB_CTX_REQ_SUBMITTED:
-		if (!ctx->in_rid)
-			break;
-		fallthrough;
-	default:
-		err("%s: Unexpected context state %d", __func__,
-		    state);
-		fallthrough;
-	case EZUSB_CTX_REQ_TIMEOUT:
-	case EZUSB_CTX_REQ_FAILED:
-	case EZUSB_CTX_RESP_TIMEOUT:
-	case EZUSB_CTX_REQSUBMIT_FAIL:
-		printk(KERN_ERR PFX "Access failed, resetting (state %d,"
-		       " reply_count %d)\n", state, upriv->reply_count);
-		upriv->reply_count = 0;
-		if (state == EZUSB_CTX_REQ_TIMEOUT
-		    || state == EZUSB_CTX_RESP_TIMEOUT) {
-			printk(KERN_ERR PFX "ctx timed out\n");
-			retval = -ETIMEDOUT;
-		} else {
-			printk(KERN_ERR PFX "ctx failed\n");
-			retval = -EFAULT;
-		}
-		goto exit;
-	}
-	if (ctx->in_rid) {
-		struct ezusb_packet *ans = ctx->buf;
-		unsigned exp_len;
-
-		if (ans->hermes_len != 0)
-			exp_len = le16_to_cpu(ans->hermes_len) * 2 + 12;
-		else
-			exp_len = 14;
-
-		if (exp_len != ctx->buf_length) {
-			err("%s: length mismatch for RID 0x%04x: "
-			    "expected %d, got %d", __func__,
-			    ctx->in_rid, exp_len, ctx->buf_length);
-			retval = -EIO;
-			goto exit;
-		}
-
-		if (ans_buff)
-			memcpy(ans_buff, ans->data, min(exp_len, ans_size));
-		if (ans_length)
-			*ans_length = le16_to_cpu(ans->hermes_len);
-	}
- exit:
-	ezusb_request_context_put(ctx);
-	return retval;
-}
-
-static int __ezusb_write_ltv(struct hermes *hw, int bap, u16 rid,
-			   u16 length, const void *data,
-			   ezusb_ctx_wait ezusb_ctx_wait_func)
-{
-	struct ezusb_priv *upriv = hw->priv;
-	u16 frame_type;
-	struct request_context *ctx;
-
-	if (length == 0)
-		return -EINVAL;
-
-	length = HERMES_RECLEN_TO_BYTES(length);
-
-	/* On memory mapped devices HERMES_RID_CNFGROUPADDRESSES can be
-	 * set to be empty, but the USB bridge doesn't like it */
-	if (length == 0)
-		return 0;
-
-	ctx = ezusb_alloc_ctx(upriv, rid, EZUSB_RID_ACK);
-	if (!ctx)
-		return -ENOMEM;
-
-	if (rid == EZUSB_RID_TX)
-		frame_type = EZUSB_FRAME_DATA;
-	else
-		frame_type = EZUSB_FRAME_CONTROL;
-
-	return ezusb_access_ltv(upriv, ctx, length, data, frame_type,
-				NULL, 0, NULL, ezusb_ctx_wait_func);
-}
-
-static int ezusb_write_ltv(struct hermes *hw, int bap, u16 rid,
-			   u16 length, const void *data)
-{
-	return __ezusb_write_ltv(hw, bap, rid, length, data,
-				 ezusb_req_ctx_wait_poll);
-}
-
-static int __ezusb_read_ltv(struct hermes *hw, int bap, u16 rid,
-			    unsigned bufsize, u16 *length, void *buf,
-			    ezusb_ctx_wait ezusb_ctx_wait_func)
-
-{
-	struct ezusb_priv *upriv = hw->priv;
-	struct request_context *ctx;
-
-	if (bufsize % 2)
-		return -EINVAL;
-
-	ctx = ezusb_alloc_ctx(upriv, rid, rid);
-	if (!ctx)
-		return -ENOMEM;
-
-	return ezusb_access_ltv(upriv, ctx, 0, NULL, EZUSB_FRAME_CONTROL,
-				buf, bufsize, length, ezusb_req_ctx_wait_poll);
-}
-
-static int ezusb_read_ltv(struct hermes *hw, int bap, u16 rid,
-			    unsigned bufsize, u16 *length, void *buf)
-{
-	return __ezusb_read_ltv(hw, bap, rid, bufsize, length, buf,
-				ezusb_req_ctx_wait_poll);
-}
-
-static int ezusb_read_ltv_preempt(struct hermes *hw, int bap, u16 rid,
-				  unsigned bufsize, u16 *length, void *buf)
-{
-	return __ezusb_read_ltv(hw, bap, rid, bufsize, length, buf,
-				ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_doicmd_wait(struct hermes *hw, u16 cmd, u16 parm0, u16 parm1,
-			     u16 parm2, struct hermes_response *resp)
-{
-	WARN_ON_ONCE(1);
-	return -EINVAL;
-}
-
-static int __ezusb_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0,
-			    struct hermes_response *resp,
-			    ezusb_ctx_wait ezusb_ctx_wait_func)
-{
-	struct ezusb_priv *upriv = hw->priv;
-	struct request_context *ctx;
-
-	__le16 data[4] = {
-		cpu_to_le16(cmd),
-		cpu_to_le16(parm0),
-		0,
-		0,
-	};
-	netdev_dbg(upriv->dev, "0x%04X, parm0 0x%04X\n", cmd, parm0);
-	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK);
-	if (!ctx)
-		return -ENOMEM;
-
-	return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
-				EZUSB_FRAME_CONTROL, NULL, 0, NULL,
-				ezusb_ctx_wait_func);
-}
-
-static int ezusb_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0,
-			    struct hermes_response *resp)
-{
-	return __ezusb_docmd_wait(hw, cmd, parm0, resp, ezusb_req_ctx_wait_poll);
-}
-
-static int ezusb_bap_pread(struct hermes *hw, int bap,
-			   void *buf, int len, u16 id, u16 offset)
-{
-	struct ezusb_priv *upriv = hw->priv;
-	struct ezusb_packet *ans = (void *) upriv->read_urb->transfer_buffer;
-	int actual_length = upriv->read_urb->actual_length;
-
-	if (id == EZUSB_RID_RX) {
-		if ((sizeof(*ans) + offset + len) > actual_length) {
-			printk(KERN_ERR PFX "BAP read beyond buffer end "
-			       "in rx frame\n");
-			return -EINVAL;
-		}
-		memcpy(buf, ans->data + offset, len);
-		return 0;
-	}
-
-	if (EZUSB_IS_INFO(id)) {
-		/* Include 4 bytes for length/type */
-		if ((sizeof(*ans) + offset + len - 4) > actual_length) {
-			printk(KERN_ERR PFX "BAP read beyond buffer end "
-			       "in info frame\n");
-			return -EFAULT;
-		}
-		memcpy(buf, ans->data + offset - 4, len);
-	} else {
-		printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int ezusb_read_pda(struct hermes *hw, __le16 *pda,
-			  u32 pda_addr, u16 pda_len)
-{
-	struct ezusb_priv *upriv = hw->priv;
-	struct request_context *ctx;
-	__le16 data[] = {
-		cpu_to_le16(pda_addr & 0xffff),
-		cpu_to_le16(pda_len - 4)
-	};
-	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_READ_PDA, EZUSB_RID_READ_PDA);
-	if (!ctx)
-		return -ENOMEM;
-
-	/* wl_lkm does not include PDA size in the PDA area.
-	 * We will pad the information into pda, so other routines
-	 * don't have to be modified */
-	pda[0] = cpu_to_le16(pda_len - 2);
-	/* Includes CFG_PROD_DATA but not itself */
-	pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
-
-	return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
-				EZUSB_FRAME_CONTROL, &pda[2], pda_len - 4,
-				NULL, ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_program_init(struct hermes *hw, u32 entry_point)
-{
-	struct ezusb_priv *upriv = hw->priv;
-	struct request_context *ctx;
-	__le32 data = cpu_to_le32(entry_point);
-
-	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_INIT, EZUSB_RID_ACK);
-	if (!ctx)
-		return -ENOMEM;
-
-	return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
-				EZUSB_FRAME_CONTROL, NULL, 0, NULL,
-				ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_program_end(struct hermes *hw)
-{
-	struct ezusb_priv *upriv = hw->priv;
-	struct request_context *ctx;
-
-	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_END, EZUSB_RID_ACK);
-	if (!ctx)
-		return -ENOMEM;
-
-	return ezusb_access_ltv(upriv, ctx, 0, NULL,
-				EZUSB_FRAME_CONTROL, NULL, 0, NULL,
-				ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_program_bytes(struct hermes *hw, const char *buf,
-			       u32 addr, u32 len)
-{
-	struct ezusb_priv *upriv = hw->priv;
-	struct request_context *ctx;
-	__le32 data = cpu_to_le32(addr);
-	int err;
-
-	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_SET_ADDR, EZUSB_RID_ACK);
-	if (!ctx)
-		return -ENOMEM;
-
-	err = ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
-			       EZUSB_FRAME_CONTROL, NULL, 0, NULL,
-			       ezusb_req_ctx_wait_compl);
-	if (err)
-		return err;
-
-	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_BYTES, EZUSB_RID_ACK);
-	if (!ctx)
-		return -ENOMEM;
-
-	return ezusb_access_ltv(upriv, ctx, len, buf,
-				EZUSB_FRAME_CONTROL, NULL, 0, NULL,
-				ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_program(struct hermes *hw, const char *buf,
-			 u32 addr, u32 len)
-{
-	u32 ch_addr;
-	u32 ch_len;
-	int err = 0;
-
-	/* We can only send 2048 bytes out of the bulk xmit at a time,
-	 * so we have to split any programming into chunks of <2048
-	 * bytes. */
-
-	ch_len = (len < MAX_DL_SIZE) ? len : MAX_DL_SIZE;
-	ch_addr = addr;
-
-	while (ch_addr < (addr + len)) {
-		pr_debug("Programming subblock of length %d "
-			 "to address 0x%08x. Data @ %p\n",
-			 ch_len, ch_addr, &buf[ch_addr - addr]);
-
-		err = ezusb_program_bytes(hw, &buf[ch_addr - addr],
-					  ch_addr, ch_len);
-		if (err)
-			break;
-
-		ch_addr += ch_len;
-		ch_len = ((addr + len - ch_addr) < MAX_DL_SIZE) ?
-			(addr + len - ch_addr) : MAX_DL_SIZE;
-	}
-
-	return err;
-}
-
-static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	struct ezusb_priv *upriv = priv->card;
-	u8 mic[MICHAEL_MIC_LEN + 1];
-	int err = 0;
-	int tx_control;
-	unsigned long flags;
-	struct request_context *ctx;
-	u8 *buf;
-	int tx_size;
-
-	if (!netif_running(dev)) {
-		printk(KERN_ERR "%s: Tx on stopped device!\n",
-		       dev->name);
-		return NETDEV_TX_BUSY;
-	}
-
-	if (netif_queue_stopped(dev)) {
-		printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
-		       dev->name);
-		return NETDEV_TX_BUSY;
-	}
-
-	if (orinoco_lock(priv, &flags) != 0) {
-		printk(KERN_ERR
-		       "%s: ezusb_xmit() called while hw_unavailable\n",
-		       dev->name);
-		return NETDEV_TX_BUSY;
-	}
-
-	if (!netif_carrier_ok(dev) ||
-	    (priv->iw_mode == NL80211_IFTYPE_MONITOR)) {
-		/* Oops, the firmware hasn't established a connection,
-		   silently drop the packet (this seems to be the
-		   safest approach). */
-		goto drop;
-	}
-
-	/* Check packet length */
-	if (skb->len < ETH_HLEN)
-		goto drop;
-
-	tx_control = 0;
-
-	err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
-				       &mic[0]);
-	if (err)
-		goto drop;
-
-	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0);
-	if (!ctx)
-		goto drop;
-
-	memset(ctx->buf, 0, BULK_BUF_SIZE);
-	buf = ctx->buf->data;
-
-	{
-		__le16 *tx_cntl = (__le16 *)buf;
-		*tx_cntl = cpu_to_le16(tx_control);
-		buf += sizeof(*tx_cntl);
-	}
-
-	memcpy(buf, skb->data, skb->len);
-	buf += skb->len;
-
-	if (tx_control & HERMES_TXCTRL_MIC) {
-		u8 *m = mic;
-		/* Mic has been offset so it can be copied to an even
-		 * address. We're copying eveything anyway, so we
-		 * don't need to copy that first byte. */
-		if (skb->len % 2)
-			m++;
-		memcpy(buf, m, MICHAEL_MIC_LEN);
-		buf += MICHAEL_MIC_LEN;
-	}
-
-	/* Finally, we actually initiate the send */
-	netif_stop_queue(dev);
-
-	/* The card may behave better if we send evenly sized usb transfers */
-	tx_size = ALIGN(buf - ctx->buf->data, 2);
-
-	err = ezusb_access_ltv(upriv, ctx, tx_size, NULL,
-			       EZUSB_FRAME_DATA, NULL, 0, NULL,
-			       ezusb_req_ctx_wait_skip);
-
-	if (err) {
-		netif_start_queue(dev);
-		if (net_ratelimit())
-			printk(KERN_ERR "%s: Error %d transmitting packet\n",
-				dev->name, err);
-		goto busy;
-	}
-
-	netif_trans_update(dev);
-	stats->tx_bytes += skb->len;
-	goto ok;
-
- drop:
-	stats->tx_errors++;
-	stats->tx_dropped++;
-
- ok:
-	orinoco_unlock(priv, &flags);
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-
- busy:
-	orinoco_unlock(priv, &flags);
-	return NETDEV_TX_BUSY;
-}
-
-static int ezusb_allocate(struct hermes *hw, u16 size, u16 *fid)
-{
-	*fid = EZUSB_RID_TX;
-	return 0;
-}
-
-
-static int ezusb_hard_reset(struct orinoco_private *priv)
-{
-	struct ezusb_priv *upriv = priv->card;
-	int retval = ezusb_8051_cpucs(upriv, 1);
-
-	if (retval < 0) {
-		err("Failed to reset");
-		return retval;
-	}
-
-	retval = ezusb_8051_cpucs(upriv, 0);
-	if (retval < 0) {
-		err("Failed to unreset");
-		return retval;
-	}
-
-	netdev_dbg(upriv->dev, "sending control message\n");
-	retval = usb_control_msg(upriv->udev,
-				 usb_sndctrlpipe(upriv->udev, 0),
-				 EZUSB_REQUEST_TRIGGER,
-				 USB_TYPE_VENDOR | USB_RECIP_DEVICE |
-				 USB_DIR_OUT, 0x0, 0x0, NULL, 0,
-				 DEF_TIMEOUT);
-	if (retval < 0) {
-		err("EZUSB_REQUEST_TRIGGER failed retval %d", retval);
-		return retval;
-	}
-#if 0
-	dbg("Sending EZUSB_REQUEST_TRIG_AC");
-	retval = usb_control_msg(upriv->udev,
-				 usb_sndctrlpipe(upriv->udev, 0),
-				 EZUSB_REQUEST_TRIG_AC,
-				 USB_TYPE_VENDOR | USB_RECIP_DEVICE |
-				 USB_DIR_OUT, 0x00FA, 0x0, NULL, 0,
-				 DEF_TIMEOUT);
-	if (retval < 0) {
-		err("EZUSB_REQUEST_TRIG_AC failed retval %d", retval);
-		return retval;
-	}
-#endif
-
-	return 0;
-}
-
-
-static int ezusb_init(struct hermes *hw)
-{
-	struct ezusb_priv *upriv = hw->priv;
-	int retval;
-
-	if (!upriv)
-		return -EINVAL;
-
-	upriv->reply_count = 0;
-	/* Write the MAGIC number on the simulated registers to keep
-	 * orinoco.c happy */
-	hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
-	hermes_write_regn(hw, RXFID, EZUSB_RID_RX);
-
-	usb_kill_urb(upriv->read_urb);
-	ezusb_submit_in_urb(upriv);
-
-	retval = __ezusb_write_ltv(hw, 0, EZUSB_RID_INIT1,
-				 HERMES_BYTES_TO_RECLEN(2), "\x10\x00",
-				 ezusb_req_ctx_wait_compl);
-	if (retval < 0) {
-		printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval);
-		return retval;
-	}
-
-	retval = __ezusb_docmd_wait(hw, HERMES_CMD_INIT, 0, NULL,
-				    ezusb_req_ctx_wait_compl);
-	if (retval < 0) {
-		printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval);
-		return retval;
-	}
-
-	return 0;
-}
-
-static void ezusb_bulk_in_callback(struct urb *urb)
-{
-	struct ezusb_priv *upriv = (struct ezusb_priv *) urb->context;
-	struct ezusb_packet *ans = urb->transfer_buffer;
-	u16 crc;
-	u16 hermes_rid;
-
-	if (upriv->udev == NULL)
-		return;
-
-	if (urb->status == -ETIMEDOUT) {
-		/* When a device gets unplugged we get this every time
-		 * we resubmit, flooding the logs.  Since we don't use
-		 * USB timeouts, it shouldn't happen any other time*/
-		pr_warn("%s: urb timed out, not resubmitting\n", __func__);
-		return;
-	}
-	if (urb->status == -ECONNABORTED) {
-		pr_warn("%s: connection abort, resubmitting urb\n",
-			__func__);
-		goto resubmit;
-	}
-	if ((urb->status == -EILSEQ)
-	    || (urb->status == -ENOENT)
-	    || (urb->status == -ECONNRESET)) {
-		netdev_dbg(upriv->dev, "status %d, not resubmiting\n",
-			   urb->status);
-		return;
-	}
-	if (urb->status)
-		netdev_dbg(upriv->dev, "status: %d length: %d\n",
-			   urb->status, urb->actual_length);
-	if (urb->actual_length < sizeof(*ans)) {
-		err("%s: short read, ignoring", __func__);
-		goto resubmit;
-	}
-	crc = build_crc(ans);
-	if (le16_to_cpu(ans->crc) != crc) {
-		err("CRC error, ignoring packet");
-		goto resubmit;
-	}
-
-	hermes_rid = le16_to_cpu(ans->hermes_rid);
-	if ((hermes_rid != EZUSB_RID_RX) && !EZUSB_IS_INFO(hermes_rid)) {
-		ezusb_request_in_callback(upriv, urb);
-	} else if (upriv->dev) {
-		struct net_device *dev = upriv->dev;
-		struct orinoco_private *priv = ndev_priv(dev);
-		struct hermes *hw = &priv->hw;
-
-		if (hermes_rid == EZUSB_RID_RX) {
-			__orinoco_ev_rx(dev, hw);
-		} else {
-			hermes_write_regn(hw, INFOFID,
-					  le16_to_cpu(ans->hermes_rid));
-			__orinoco_ev_info(dev, hw);
-		}
-	}
-
- resubmit:
-	if (upriv->udev)
-		ezusb_submit_in_urb(upriv);
-}
-
-static inline void ezusb_delete(struct ezusb_priv *upriv)
-{
-	struct list_head *item;
-	struct list_head *tmp_item;
-	unsigned long flags;
-
-	BUG_ON(!upriv);
-
-	mutex_lock(&upriv->mtx);
-
-	upriv->udev = NULL;	/* No timer will be rearmed from here */
-
-	usb_kill_urb(upriv->read_urb);
-
-	spin_lock_irqsave(&upriv->req_lock, flags);
-	list_for_each_safe(item, tmp_item, &upriv->req_active) {
-		struct request_context *ctx;
-		int err;
-
-		ctx = list_entry(item, struct request_context, list);
-		refcount_inc(&ctx->refcount);
-
-		ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
-		err = usb_unlink_urb(ctx->outurb);
-
-		spin_unlock_irqrestore(&upriv->req_lock, flags);
-		if (err == -EINPROGRESS)
-			wait_for_completion(&ctx->done);
-
-		del_timer_sync(&ctx->timer);
-		/* FIXME: there is an slight chance for the irq handler to
-		 * be running */
-		if (!list_empty(&ctx->list))
-			ezusb_ctx_complete(ctx);
-
-		ezusb_request_context_put(ctx);
-		spin_lock_irqsave(&upriv->req_lock, flags);
-	}
-	spin_unlock_irqrestore(&upriv->req_lock, flags);
-
-	list_for_each_safe(item, tmp_item, &upriv->req_pending)
-	    ezusb_ctx_complete(list_entry(item,
-					  struct request_context, list));
-
-	if (upriv->read_urb && upriv->read_urb->status == -EINPROGRESS)
-		printk(KERN_ERR PFX "Some URB in progress\n");
-
-	mutex_unlock(&upriv->mtx);
-
-	if (upriv->read_urb) {
-		kfree(upriv->read_urb->transfer_buffer);
-		usb_free_urb(upriv->read_urb);
-	}
-	kfree(upriv->bap_buf);
-	if (upriv->dev) {
-		struct orinoco_private *priv = ndev_priv(upriv->dev);
-		orinoco_if_del(priv);
-		wiphy_unregister(priv_to_wiphy(upriv));
-		free_orinocodev(priv);
-	}
-}
-
-static void ezusb_lock_irqsave(spinlock_t *lock,
-			       unsigned long *flags) __acquires(lock)
-{
-	spin_lock_bh(lock);
-}
-
-static void ezusb_unlock_irqrestore(spinlock_t *lock,
-				    unsigned long *flags) __releases(lock)
-{
-	spin_unlock_bh(lock);
-}
-
-static void ezusb_lock_irq(spinlock_t *lock) __acquires(lock)
-{
-	spin_lock_bh(lock);
-}
-
-static void ezusb_unlock_irq(spinlock_t *lock) __releases(lock)
-{
-	spin_unlock_bh(lock);
-}
-
-static const struct hermes_ops ezusb_ops = {
-	.init = ezusb_init,
-	.cmd_wait = ezusb_docmd_wait,
-	.init_cmd_wait = ezusb_doicmd_wait,
-	.allocate = ezusb_allocate,
-	.read_ltv = ezusb_read_ltv,
-	.read_ltv_pr = ezusb_read_ltv_preempt,
-	.write_ltv = ezusb_write_ltv,
-	.bap_pread = ezusb_bap_pread,
-	.read_pda = ezusb_read_pda,
-	.program_init = ezusb_program_init,
-	.program_end = ezusb_program_end,
-	.program = ezusb_program,
-	.lock_irqsave = ezusb_lock_irqsave,
-	.unlock_irqrestore = ezusb_unlock_irqrestore,
-	.lock_irq = ezusb_lock_irq,
-	.unlock_irq = ezusb_unlock_irq,
-};
-
-static const struct net_device_ops ezusb_netdev_ops = {
-	.ndo_open		= orinoco_open,
-	.ndo_stop		= orinoco_stop,
-	.ndo_start_xmit		= ezusb_xmit,
-	.ndo_set_rx_mode	= orinoco_set_multicast_list,
-	.ndo_change_mtu		= orinoco_change_mtu,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_tx_timeout		= orinoco_tx_timeout,
-};
-
-static int ezusb_probe(struct usb_interface *interface,
-		       const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(interface);
-	struct orinoco_private *priv;
-	struct hermes *hw;
-	struct ezusb_priv *upriv = NULL;
-	struct usb_interface_descriptor *iface_desc;
-	struct usb_endpoint_descriptor *ep;
-	const struct firmware *fw_entry = NULL;
-	int retval = 0;
-	int i;
-
-	priv = alloc_orinocodev(sizeof(*upriv), &udev->dev,
-				ezusb_hard_reset, NULL);
-	if (!priv) {
-		err("Couldn't allocate orinocodev");
-		retval = -ENOMEM;
-		goto exit;
-	}
-
-	hw = &priv->hw;
-
-	upriv = priv->card;
-
-	mutex_init(&upriv->mtx);
-	spin_lock_init(&upriv->reply_count_lock);
-
-	spin_lock_init(&upriv->req_lock);
-	INIT_LIST_HEAD(&upriv->req_pending);
-	INIT_LIST_HEAD(&upriv->req_active);
-
-	upriv->udev = udev;
-
-	hw->iobase = (void __force __iomem *) &upriv->hermes_reg_fake;
-	hw->reg_spacing = HERMES_16BIT_REGSPACING;
-	hw->priv = upriv;
-	hw->ops = &ezusb_ops;
-
-	/* set up the endpoint information */
-	/* check out the endpoints */
-
-	iface_desc = &interface->cur_altsetting->desc;
-	for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
-		ep = &interface->cur_altsetting->endpoint[i].desc;
-
-		if (usb_endpoint_is_bulk_in(ep)) {
-			/* we found a bulk in endpoint */
-			if (upriv->read_urb != NULL) {
-				pr_warn("Found a second bulk in ep, ignored\n");
-				continue;
-			}
-
-			upriv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
-			if (!upriv->read_urb)
-				goto error;
-			if (le16_to_cpu(ep->wMaxPacketSize) != 64)
-				pr_warn("bulk in: wMaxPacketSize!= 64\n");
-			if (ep->bEndpointAddress != (2 | USB_DIR_IN))
-				pr_warn("bulk in: bEndpointAddress: %d\n",
-					ep->bEndpointAddress);
-			upriv->read_pipe = usb_rcvbulkpipe(udev,
-							 ep->
-							 bEndpointAddress);
-			upriv->read_urb->transfer_buffer =
-			    kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
-			if (!upriv->read_urb->transfer_buffer) {
-				err("Couldn't allocate IN buffer");
-				goto error;
-			}
-		}
-
-		if (usb_endpoint_is_bulk_out(ep)) {
-			/* we found a bulk out endpoint */
-			if (upriv->bap_buf != NULL) {
-				pr_warn("Found a second bulk out ep, ignored\n");
-				continue;
-			}
-
-			if (le16_to_cpu(ep->wMaxPacketSize) != 64)
-				pr_warn("bulk out: wMaxPacketSize != 64\n");
-			if (ep->bEndpointAddress != 2)
-				pr_warn("bulk out: bEndpointAddress: %d\n",
-					ep->bEndpointAddress);
-			upriv->write_pipe = usb_sndbulkpipe(udev,
-							  ep->
-							  bEndpointAddress);
-			upriv->bap_buf = kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
-			if (!upriv->bap_buf) {
-				err("Couldn't allocate bulk_out_buffer");
-				goto error;
-			}
-		}
-	}
-	if (!upriv->bap_buf || !upriv->read_urb) {
-		err("Didn't find the required bulk endpoints");
-		goto error;
-	}
-
-	if (request_firmware(&fw_entry, "orinoco_ezusb_fw",
-			     &interface->dev) == 0) {
-		firmware.size = fw_entry->size;
-		firmware.code = fw_entry->data;
-	}
-	if (firmware.size && firmware.code) {
-		if (ezusb_firmware_download(upriv, &firmware) < 0)
-			goto error;
-	} else {
-		err("No firmware to download");
-		goto error;
-	}
-
-	if (ezusb_hard_reset(priv) < 0) {
-		err("Cannot reset the device");
-		goto error;
-	}
-
-	/* If the firmware is already downloaded orinoco.c will call
-	 * ezusb_init but if the firmware is not already there, that will make
-	 * the kernel very unstable, so we try initializing here and quit in
-	 * case of error */
-	if (ezusb_init(hw) < 0) {
-		err("Couldn't initialize the device");
-		err("Firmware may not be downloaded or may be wrong.");
-		goto error;
-	}
-
-	/* Initialise the main driver */
-	if (orinoco_init(priv) != 0) {
-		err("orinoco_init() failed\n");
-		goto error;
-	}
-
-	if (orinoco_if_add(priv, 0, 0, &ezusb_netdev_ops) != 0) {
-		upriv->dev = NULL;
-		err("%s: orinoco_if_add() failed", __func__);
-		wiphy_unregister(priv_to_wiphy(priv));
-		goto error;
-	}
-	upriv->dev = priv->ndev;
-
-	goto exit;
-
- error:
-	ezusb_delete(upriv);
-	if (upriv->dev) {
-		/* upriv->dev was 0, so ezusb_delete() didn't free it */
-		free_orinocodev(priv);
-	}
-	upriv = NULL;
-	retval = -EFAULT;
- exit:
-	if (fw_entry) {
-		firmware.code = NULL;
-		firmware.size = 0;
-		release_firmware(fw_entry);
-	}
-	usb_set_intfdata(interface, upriv);
-	return retval;
-}
-
-
-static void ezusb_disconnect(struct usb_interface *intf)
-{
-	struct ezusb_priv *upriv = usb_get_intfdata(intf);
-	usb_set_intfdata(intf, NULL);
-	ezusb_delete(upriv);
-	printk(KERN_INFO PFX "Disconnected\n");
-}
-
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver orinoco_driver = {
-	.name = DRIVER_NAME,
-	.probe = ezusb_probe,
-	.disconnect = ezusb_disconnect,
-	.id_table = ezusb_table,
-	.disable_hub_initiated_lpm = 1,
-};
-
-module_usb_driver(orinoco_driver);
-
-MODULE_AUTHOR("Manuel Estrada Sainz");
-MODULE_DESCRIPTION("Driver for Orinoco wireless LAN cards using EZUSB bridge");
-MODULE_LICENSE("Dual MPL/GPL");
diff --git a/drivers/net/wireless/intersil/orinoco/scan.c b/drivers/net/wireless/intersil/orinoco/scan.c
deleted file mode 100644
index 6d1d084854..0000000000
--- a/drivers/net/wireless/intersil/orinoco/scan.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/* Helpers for managing scan queues
- *
- * See copyright notice in main.c
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ieee80211.h>
-#include <net/cfg80211.h>
-
-#include "hermes.h"
-#include "orinoco.h"
-#include "main.h"
-
-#include "scan.h"
-
-#define ZERO_DBM_OFFSET 0x95
-#define MAX_SIGNAL_LEVEL 0x8A
-#define MIN_SIGNAL_LEVEL 0x2F
-
-#define SIGNAL_TO_DBM(x)					\
-	(clamp_t(s32, (x), MIN_SIGNAL_LEVEL, MAX_SIGNAL_LEVEL)	\
-	 - ZERO_DBM_OFFSET)
-#define SIGNAL_TO_MBM(x) (SIGNAL_TO_DBM(x) * 100)
-
-static int symbol_build_supp_rates(u8 *buf, const __le16 *rates)
-{
-	int i;
-	u8 rate;
-
-	buf[0] = WLAN_EID_SUPP_RATES;
-	for (i = 0; i < 5; i++) {
-		rate = le16_to_cpu(rates[i]);
-		/* NULL terminated */
-		if (rate == 0x0)
-			break;
-		buf[i + 2] = rate;
-	}
-	buf[1] = i;
-
-	return i + 2;
-}
-
-static int prism_build_supp_rates(u8 *buf, const u8 *rates)
-{
-	int i;
-
-	buf[0] = WLAN_EID_SUPP_RATES;
-	for (i = 0; i < 8; i++) {
-		/* NULL terminated */
-		if (rates[i] == 0x0)
-			break;
-		buf[i + 2] = rates[i];
-	}
-	buf[1] = i;
-
-	/* We might still have another 2 rates, which need to go in
-	 * extended supported rates */
-	if (i == 8 && rates[i] > 0) {
-		buf[10] = WLAN_EID_EXT_SUPP_RATES;
-		for (; i < 10; i++) {
-			/* NULL terminated */
-			if (rates[i] == 0x0)
-				break;
-			buf[i + 2] = rates[i];
-		}
-		buf[11] = i - 8;
-	}
-
-	return (i < 8) ? i + 2 : i + 4;
-}
-
-static void orinoco_add_hostscan_result(struct orinoco_private *priv,
-					const union hermes_scan_info *bss)
-{
-	struct wiphy *wiphy = priv_to_wiphy(priv);
-	struct ieee80211_channel *channel;
-	struct cfg80211_bss *cbss;
-	u8 *ie;
-	u8 ie_buf[46];
-	u64 timestamp;
-	s32 signal;
-	u16 capability;
-	u16 beacon_interval;
-	int ie_len;
-	int freq;
-	int len;
-
-	len = le16_to_cpu(bss->a.essid_len);
-
-	/* Reconstruct SSID and bitrate IEs to pass up */
-	ie_buf[0] = WLAN_EID_SSID;
-	ie_buf[1] = len;
-	memcpy(&ie_buf[2], bss->a.essid, len);
-
-	ie = ie_buf + len + 2;
-	ie_len = ie_buf[1] + 2;
-	switch (priv->firmware_type) {
-	case FIRMWARE_TYPE_SYMBOL:
-		ie_len += symbol_build_supp_rates(ie, bss->s.rates);
-		break;
-
-	case FIRMWARE_TYPE_INTERSIL:
-		ie_len += prism_build_supp_rates(ie, bss->p.rates);
-		break;
-
-	case FIRMWARE_TYPE_AGERE:
-	default:
-		break;
-	}
-
-	freq = ieee80211_channel_to_frequency(
-		le16_to_cpu(bss->a.channel), NL80211_BAND_2GHZ);
-	channel = ieee80211_get_channel(wiphy, freq);
-	if (!channel) {
-		printk(KERN_DEBUG "Invalid channel designation %04X(%04X)",
-			bss->a.channel, freq);
-		return;	/* Then ignore it for now */
-	}
-	timestamp = 0;
-	capability = le16_to_cpu(bss->a.capabilities);
-	beacon_interval = le16_to_cpu(bss->a.beacon_interv);
-	signal = SIGNAL_TO_MBM(le16_to_cpu(bss->a.level));
-
-	cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN,
-				   bss->a.bssid, timestamp, capability,
-				   beacon_interval, ie_buf, ie_len, signal,
-				   GFP_KERNEL);
-	cfg80211_put_bss(wiphy, cbss);
-}
-
-void orinoco_add_extscan_result(struct orinoco_private *priv,
-				struct agere_ext_scan_info *bss,
-				size_t len)
-{
-	struct wiphy *wiphy = priv_to_wiphy(priv);
-	struct ieee80211_channel *channel;
-	struct cfg80211_bss *cbss;
-	const u8 *ie;
-	u64 timestamp;
-	s32 signal;
-	u16 capability;
-	u16 beacon_interval;
-	size_t ie_len;
-	int chan, freq;
-
-	ie_len = len - sizeof(*bss);
-	ie = cfg80211_find_ie(WLAN_EID_DS_PARAMS, bss->data, ie_len);
-	chan = ie ? ie[2] : 0;
-	freq = ieee80211_channel_to_frequency(chan, NL80211_BAND_2GHZ);
-	channel = ieee80211_get_channel(wiphy, freq);
-
-	timestamp = le64_to_cpu(bss->timestamp);
-	capability = le16_to_cpu(bss->capabilities);
-	beacon_interval = le16_to_cpu(bss->beacon_interval);
-	ie = bss->data;
-	signal = SIGNAL_TO_MBM(bss->level);
-
-	cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN,
-				   bss->bssid, timestamp, capability,
-				   beacon_interval, ie, ie_len, signal,
-				   GFP_KERNEL);
-	cfg80211_put_bss(wiphy, cbss);
-}
-
-void orinoco_add_hostscan_results(struct orinoco_private *priv,
-				  unsigned char *buf,
-				  size_t len)
-{
-	int offset;		/* In the scan data */
-	size_t atom_len;
-	bool abort = false;
-
-	switch (priv->firmware_type) {
-	case FIRMWARE_TYPE_AGERE:
-		atom_len = sizeof(struct agere_scan_apinfo);
-		offset = 0;
-		break;
-
-	case FIRMWARE_TYPE_SYMBOL:
-		/* Lack of documentation necessitates this hack.
-		 * Different firmwares have 68 or 76 byte long atoms.
-		 * We try modulo first.  If the length divides by both,
-		 * we check what would be the channel in the second
-		 * frame for a 68-byte atom.  76-byte atoms have 0 there.
-		 * Valid channel cannot be 0.  */
-		if (len % 76)
-			atom_len = 68;
-		else if (len % 68)
-			atom_len = 76;
-		else if (len >= 1292 && buf[68] == 0)
-			atom_len = 76;
-		else
-			atom_len = 68;
-		offset = 0;
-		break;
-
-	case FIRMWARE_TYPE_INTERSIL:
-		offset = 4;
-		if (priv->has_hostscan) {
-			atom_len = le16_to_cpup((__le16 *)buf);
-			/* Sanity check for atom_len */
-			if (atom_len < sizeof(struct prism2_scan_apinfo)) {
-				printk(KERN_ERR "%s: Invalid atom_len in scan "
-				       "data: %zu\n", priv->ndev->name,
-				       atom_len);
-				abort = true;
-				goto scan_abort;
-			}
-		} else
-			atom_len = offsetof(struct prism2_scan_apinfo, atim);
-		break;
-
-	default:
-		abort = true;
-		goto scan_abort;
-	}
-
-	/* Check that we got an whole number of atoms */
-	if ((len - offset) % atom_len) {
-		printk(KERN_ERR "%s: Unexpected scan data length %zu, "
-		       "atom_len %zu, offset %d\n", priv->ndev->name, len,
-		       atom_len, offset);
-		abort = true;
-		goto scan_abort;
-	}
-
-	/* Process the entries one by one */
-	for (; offset + atom_len <= len; offset += atom_len) {
-		union hermes_scan_info *atom;
-
-		atom = (union hermes_scan_info *) (buf + offset);
-
-		orinoco_add_hostscan_result(priv, atom);
-	}
-
- scan_abort:
-	if (priv->scan_request) {
-		struct cfg80211_scan_info info = {
-			.aborted = abort,
-		};
-
-		cfg80211_scan_done(priv->scan_request, &info);
-		priv->scan_request = NULL;
-	}
-}
-
-void orinoco_scan_done(struct orinoco_private *priv, bool abort)
-{
-	if (priv->scan_request) {
-		struct cfg80211_scan_info info = {
-			.aborted = abort,
-		};
-
-		cfg80211_scan_done(priv->scan_request, &info);
-		priv->scan_request = NULL;
-	}
-}
diff --git a/drivers/net/wireless/intersil/orinoco/scan.h b/drivers/net/wireless/intersil/orinoco/scan.h
deleted file mode 100644
index 27281fb0a6..0000000000
--- a/drivers/net/wireless/intersil/orinoco/scan.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Helpers for managing scan queues
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_SCAN_H_
-#define _ORINOCO_SCAN_H_
-
-/* Forward declarations */
-struct orinoco_private;
-struct agere_ext_scan_info;
-
-/* Add scan results */
-void orinoco_add_extscan_result(struct orinoco_private *priv,
-				struct agere_ext_scan_info *atom,
-				size_t len);
-void orinoco_add_hostscan_results(struct orinoco_private *dev,
-				  unsigned char *buf,
-				  size_t len);
-void orinoco_scan_done(struct orinoco_private *priv, bool abort);
-
-#endif /* _ORINOCO_SCAN_H_ */
diff --git a/drivers/net/wireless/intersil/orinoco/spectrum_cs.c b/drivers/net/wireless/intersil/orinoco/spectrum_cs.c
deleted file mode 100644
index 841d623c62..0000000000
--- a/drivers/net/wireless/intersil/orinoco/spectrum_cs.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
- * Symbol Wireless Networker LA4137, CompactFlash cards by Socket
- * Communications and Intel PRO/Wireless 2011B.
- *
- * The driver implements Symbol firmware download.  The rest is handled
- * in hermes.c and main.c.
- *
- * Utilities for downloading the Symbol firmware are available at
- * http://sourceforge.net/projects/orinoco/
- *
- * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
- * Portions based on orinoco_cs.c:
- *	Copyright (C) David Gibson, Linuxcare Australia
- * Portions based on Spectrum24tDnld.c from original spectrum24 driver:
- *	Copyright (C) Symbol Technologies.
- *
- * See copyright notice in file main.c.
- */
-
-#define DRIVER_NAME "spectrum_cs"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module stuff							    */
-/********************************************************************/
-
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
-MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Module parameters */
-
-/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
- * don't have any CIS entry for it. This workaround it... */
-static int ignore_cis_vcc; /* = 0 */
-module_param(ignore_cis_vcc, int, 0);
-MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
-
-/********************************************************************/
-/* Data structures						    */
-/********************************************************************/
-
-/* PCMCIA specific device information (goes in the card field of
- * struct orinoco_private */
-struct orinoco_pccard {
-	struct pcmcia_device	*p_dev;
-};
-
-/********************************************************************/
-/* Function prototypes						    */
-/********************************************************************/
-
-static int spectrum_cs_config(struct pcmcia_device *link);
-static void spectrum_cs_release(struct pcmcia_device *link);
-
-/* Constants for the CISREG_CCSR register */
-#define HCR_RUN		0x07	/* run firmware after reset */
-#define HCR_IDLE	0x0E	/* don't run firmware after reset */
-#define HCR_MEM16	0x10	/* memory width bit, should be preserved */
-
-
-/*
- * Reset the card using configuration registers COR and CCSR.
- * If IDLE is 1, stop the firmware, so that it can be safely rewritten.
- */
-static int
-spectrum_reset(struct pcmcia_device *link, int idle)
-{
-	int ret;
-	u8 save_cor;
-	u8 ccsr;
-
-	/* Doing it if hardware is gone is guaranteed crash */
-	if (!pcmcia_dev_present(link))
-		return -ENODEV;
-
-	/* Save original COR value */
-	ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor);
-	if (ret)
-		goto failed;
-
-	/* Soft-Reset card */
-	ret = pcmcia_write_config_byte(link, CISREG_COR,
-				(save_cor | COR_SOFT_RESET));
-	if (ret)
-		goto failed;
-	udelay(1000);
-
-	/* Read CCSR */
-	ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr);
-	if (ret)
-		goto failed;
-
-	/*
-	 * Start or stop the firmware.  Memory width bit should be
-	 * preserved from the value we've just read.
-	 */
-	ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16);
-	ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr);
-	if (ret)
-		goto failed;
-	udelay(1000);
-
-	/* Restore original COR configuration index */
-	ret = pcmcia_write_config_byte(link, CISREG_COR,
-				(save_cor & ~COR_SOFT_RESET));
-	if (ret)
-		goto failed;
-	udelay(1000);
-	return 0;
-
-failed:
-	return -ENODEV;
-}
-
-/********************************************************************/
-/* Device methods						    */
-/********************************************************************/
-
-static int
-spectrum_cs_hard_reset(struct orinoco_private *priv)
-{
-	struct orinoco_pccard *card = priv->card;
-	struct pcmcia_device *link = card->p_dev;
-
-	/* Soft reset using COR and HCR */
-	spectrum_reset(link, 0);
-
-	return 0;
-}
-
-static int
-spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
-{
-	struct orinoco_pccard *card = priv->card;
-	struct pcmcia_device *link = card->p_dev;
-
-	return spectrum_reset(link, idle);
-}
-
-/********************************************************************/
-/* PCMCIA stuff							    */
-/********************************************************************/
-
-static int
-spectrum_cs_probe(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv;
-	struct orinoco_pccard *card;
-	int ret;
-
-	priv = alloc_orinocodev(sizeof(*card), &link->dev,
-				spectrum_cs_hard_reset,
-				spectrum_cs_stop_firmware);
-	if (!priv)
-		return -ENOMEM;
-	card = priv->card;
-
-	/* Link both structures together */
-	card->p_dev = link;
-	link->priv = priv;
-
-	ret = spectrum_cs_config(link);
-	if (ret)
-		goto err_free_orinocodev;
-
-	return 0;
-
-err_free_orinocodev:
-	free_orinocodev(priv);
-	return ret;
-}
-
-static void spectrum_cs_detach(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-
-	orinoco_if_del(priv);
-
-	spectrum_cs_release(link);
-
-	free_orinocodev(priv);
-}				/* spectrum_cs_detach */
-
-static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
-				    void *priv_data)
-{
-	if (p_dev->config_index == 0)
-		return -EINVAL;
-
-	return pcmcia_request_io(p_dev);
-};
-
-static int
-spectrum_cs_config(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-	struct hermes *hw = &priv->hw;
-	int ret;
-	void __iomem *mem;
-
-	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
-		CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
-	if (ignore_cis_vcc)
-		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
-	ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
-	if (ret) {
-		if (!ignore_cis_vcc)
-			printk(KERN_ERR PFX "GetNextTuple(): No matching "
-			       "CIS configuration.  Maybe you need the "
-			       "ignore_cis_vcc=1 parameter.\n");
-		goto failed;
-	}
-
-	mem = ioport_map(link->resource[0]->start,
-			resource_size(link->resource[0]));
-	if (!mem)
-		goto failed;
-
-	/* We initialize the hermes structure before completing PCMCIA
-	 * configuration just in case the interrupt handler gets
-	 * called. */
-	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
-	hw->eeprom_pda = true;
-
-	ret = pcmcia_request_irq(link, orinoco_interrupt);
-	if (ret)
-		goto failed;
-
-	ret = pcmcia_enable_device(link);
-	if (ret)
-		goto failed;
-
-	/* Reset card */
-	if (spectrum_cs_hard_reset(priv) != 0)
-		goto failed;
-
-	/* Initialise the main driver */
-	if (orinoco_init(priv) != 0) {
-		printk(KERN_ERR PFX "orinoco_init() failed\n");
-		goto failed;
-	}
-
-	/* Register an interface with the stack */
-	if (orinoco_if_add(priv, link->resource[0]->start,
-			   link->irq, NULL) != 0) {
-		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
-		goto failed;
-	}
-
-	return 0;
-
- failed:
-	spectrum_cs_release(link);
-	return -ENODEV;
-}				/* spectrum_cs_config */
-
-static void
-spectrum_cs_release(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-	unsigned long flags;
-
-	/* We're committed to taking the device away now, so mark the
-	 * hardware as unavailable */
-	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
-	priv->hw_unavailable++;
-	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-
-	pcmcia_disable_device(link);
-	if (priv->hw.iobase)
-		ioport_unmap(priv->hw.iobase);
-}				/* spectrum_cs_release */
-
-
-static int
-spectrum_cs_suspend(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-
-	/* Mark the device as stopped, to block IO until later */
-	orinoco_down(priv);
-
-	return 0;
-}
-
-static int
-spectrum_cs_resume(struct pcmcia_device *link)
-{
-	struct orinoco_private *priv = link->priv;
-	int err = orinoco_up(priv);
-
-	return err;
-}
-
-
-/********************************************************************/
-/* Module initialization					    */
-/********************************************************************/
-
-static const struct pcmcia_device_id spectrum_cs_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */
-	PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */
-	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids);
-
-static struct pcmcia_driver orinoco_driver = {
-	.owner		= THIS_MODULE,
-	.name		= DRIVER_NAME,
-	.probe		= spectrum_cs_probe,
-	.remove		= spectrum_cs_detach,
-	.suspend	= spectrum_cs_suspend,
-	.resume		= spectrum_cs_resume,
-	.id_table       = spectrum_cs_ids,
-};
-module_pcmcia_driver(orinoco_driver);
diff --git a/drivers/net/wireless/intersil/orinoco/wext.c b/drivers/net/wireless/intersil/orinoco/wext.c
deleted file mode 100644
index dea1ff0443..0000000000
--- a/drivers/net/wireless/intersil/orinoco/wext.c
+++ /dev/null
@@ -1,1428 +0,0 @@
-/* Wireless extensions support.
- *
- * See copyright notice in main.c
- */
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/if_arp.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <linux/etherdevice.h>
-#include <net/iw_handler.h>
-#include <net/cfg80211.h>
-#include <net/cfg80211-wext.h>
-
-#include "hermes.h"
-#include "hermes_rid.h"
-#include "orinoco.h"
-
-#include "hw.h"
-#include "mic.h"
-#include "scan.h"
-#include "main.h"
-
-#include "wext.h"
-
-#define MAX_RID_LEN 1024
-
-/* Helper routine to record keys
- * It is called under orinoco_lock so it may not sleep */
-static int orinoco_set_key(struct orinoco_private *priv, int index,
-			   enum orinoco_alg alg, const u8 *key, int key_len,
-			   const u8 *seq, int seq_len)
-{
-	kfree_sensitive(priv->keys[index].key);
-	kfree_sensitive(priv->keys[index].seq);
-
-	if (key_len) {
-		priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC);
-		if (!priv->keys[index].key)
-			goto nomem;
-	} else
-		priv->keys[index].key = NULL;
-
-	if (seq_len) {
-		priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC);
-		if (!priv->keys[index].seq)
-			goto free_key;
-	} else
-		priv->keys[index].seq = NULL;
-
-	priv->keys[index].key_len = key_len;
-	priv->keys[index].seq_len = seq_len;
-
-	if (key_len)
-		memcpy((void *)priv->keys[index].key, key, key_len);
-	if (seq_len)
-		memcpy((void *)priv->keys[index].seq, seq, seq_len);
-
-	switch (alg) {
-	case ORINOCO_ALG_TKIP:
-		priv->keys[index].cipher = WLAN_CIPHER_SUITE_TKIP;
-		break;
-
-	case ORINOCO_ALG_WEP:
-		priv->keys[index].cipher = (key_len > SMALL_KEY_SIZE) ?
-			WLAN_CIPHER_SUITE_WEP104 : WLAN_CIPHER_SUITE_WEP40;
-		break;
-
-	case ORINOCO_ALG_NONE:
-	default:
-		priv->keys[index].cipher = 0;
-		break;
-	}
-
-	return 0;
-
-free_key:
-	kfree(priv->keys[index].key);
-	priv->keys[index].key = NULL;
-
-nomem:
-	priv->keys[index].key_len = 0;
-	priv->keys[index].seq_len = 0;
-	priv->keys[index].cipher = 0;
-
-	return -ENOMEM;
-}
-
-static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct hermes *hw = &priv->hw;
-	struct iw_statistics *wstats = &priv->wstats;
-	int err;
-	unsigned long flags;
-
-	if (!netif_device_present(dev)) {
-		printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
-		       dev->name);
-		return NULL; /* FIXME: Can we do better than this? */
-	}
-
-	/* If busy, return the old stats.  Returning NULL may cause
-	 * the interface to disappear from /proc/net/wireless */
-	if (orinoco_lock(priv, &flags) != 0)
-		return wstats;
-
-	/* We can't really wait for the tallies inquiry command to
-	 * complete, so we just use the previous results and trigger
-	 * a new tallies inquiry command for next time - Jean II */
-	/* FIXME: Really we should wait for the inquiry to come back -
-	 * as it is the stats we give don't make a whole lot of sense.
-	 * Unfortunately, it's not clear how to do that within the
-	 * wireless extensions framework: I think we're in user
-	 * context, but a lock seems to be held by the time we get in
-	 * here so we're not safe to sleep here. */
-	hermes_inquire(hw, HERMES_INQ_TALLIES);
-
-	if (priv->iw_mode == NL80211_IFTYPE_ADHOC) {
-		memset(&wstats->qual, 0, sizeof(wstats->qual));
-		/* If a spy address is defined, we report stats of the
-		 * first spy address - Jean II */
-		if (SPY_NUMBER(priv)) {
-			wstats->qual.qual = priv->spy_data.spy_stat[0].qual;
-			wstats->qual.level = priv->spy_data.spy_stat[0].level;
-			wstats->qual.noise = priv->spy_data.spy_stat[0].noise;
-			wstats->qual.updated =
-				priv->spy_data.spy_stat[0].updated;
-		}
-	} else {
-		struct {
-			__le16 qual, signal, noise, unused;
-		} __packed cq;
-
-		err = HERMES_READ_RECORD(hw, USER_BAP,
-					 HERMES_RID_COMMSQUALITY, &cq);
-
-		if (!err) {
-			wstats->qual.qual = (int)le16_to_cpu(cq.qual);
-			wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
-			wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
-			wstats->qual.updated =
-				IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
-		}
-	}
-
-	orinoco_unlock(priv, &flags);
-	return wstats;
-}
-
-/********************************************************************/
-/* Wireless extensions                                              */
-/********************************************************************/
-
-static int orinoco_ioctl_setwap(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu,
-				char *extra)
-{
-	struct sockaddr *ap_addr = &wrqu->ap_addr;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int err = -EINPROGRESS;		/* Call commit handler */
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	/* Enable automatic roaming - no sanity checks are needed */
-	if (is_zero_ether_addr(ap_addr->sa_data) ||
-	    is_broadcast_ether_addr(ap_addr->sa_data)) {
-		priv->bssid_fixed = 0;
-		eth_zero_addr(priv->desired_bssid);
-
-		/* "off" means keep existing connection */
-		if (ap_addr->sa_data[0] == 0) {
-			__orinoco_hw_set_wap(priv);
-			err = 0;
-		}
-		goto out;
-	}
-
-	if (priv->firmware_type == FIRMWARE_TYPE_AGERE) {
-		printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't "
-		       "support manual roaming\n",
-		       dev->name);
-		err = -EOPNOTSUPP;
-		goto out;
-	}
-
-	if (priv->iw_mode != NL80211_IFTYPE_STATION) {
-		printk(KERN_WARNING "%s: Manual roaming supported only in "
-		       "managed mode\n", dev->name);
-		err = -EOPNOTSUPP;
-		goto out;
-	}
-
-	/* Intersil firmware hangs without Desired ESSID */
-	if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL &&
-	    strlen(priv->desired_essid) == 0) {
-		printk(KERN_WARNING "%s: Desired ESSID must be set for "
-		       "manual roaming\n", dev->name);
-		err = -EOPNOTSUPP;
-		goto out;
-	}
-
-	/* Finally, enable manual roaming */
-	priv->bssid_fixed = 1;
-	memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN);
-
- out:
-	orinoco_unlock(priv, &flags);
-	return err;
-}
-
-static int orinoco_ioctl_getwap(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu,
-				char *extra)
-{
-	struct sockaddr *ap_addr = &wrqu->ap_addr;
-	struct orinoco_private *priv = ndev_priv(dev);
-
-	int err = 0;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	ap_addr->sa_family = ARPHRD_ETHER;
-	err = orinoco_hw_get_current_bssid(priv, ap_addr->sa_data);
-
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_ioctl_setiwencode(struct net_device *dev,
-				     struct iw_request_info *info,
-				     union iwreq_data *wrqu,
-				     char *keybuf)
-{
-	struct iw_point *erq = &wrqu->encoding;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int index = (erq->flags & IW_ENCODE_INDEX) - 1;
-	int setindex = priv->tx_key;
-	enum orinoco_alg encode_alg = priv->encode_alg;
-	int restricted = priv->wep_restrict;
-	int err = -EINPROGRESS;		/* Call commit handler */
-	unsigned long flags;
-
-	if (!priv->has_wep)
-		return -EOPNOTSUPP;
-
-	if (erq->pointer) {
-		/* We actually have a key to set - check its length */
-		if (erq->length > LARGE_KEY_SIZE)
-			return -E2BIG;
-
-		if ((erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep)
-			return -E2BIG;
-	}
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	/* Clear any TKIP key we have */
-	if ((priv->has_wpa) && (priv->encode_alg == ORINOCO_ALG_TKIP))
-		(void) orinoco_clear_tkip_key(priv, setindex);
-
-	if (erq->length > 0) {
-		if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
-			index = priv->tx_key;
-
-		/* Switch on WEP if off */
-		if (encode_alg != ORINOCO_ALG_WEP) {
-			setindex = index;
-			encode_alg = ORINOCO_ALG_WEP;
-		}
-	} else {
-		/* Important note : if the user do "iwconfig eth0 enc off",
-		 * we will arrive there with an index of -1. This is valid
-		 * but need to be taken care off... Jean II */
-		if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
-			if ((index != -1) || (erq->flags == 0)) {
-				err = -EINVAL;
-				goto out;
-			}
-		} else {
-			/* Set the index : Check that the key is valid */
-			if (priv->keys[index].key_len == 0) {
-				err = -EINVAL;
-				goto out;
-			}
-			setindex = index;
-		}
-	}
-
-	if (erq->flags & IW_ENCODE_DISABLED)
-		encode_alg = ORINOCO_ALG_NONE;
-	if (erq->flags & IW_ENCODE_OPEN)
-		restricted = 0;
-	if (erq->flags & IW_ENCODE_RESTRICTED)
-		restricted = 1;
-
-	if (erq->pointer && erq->length > 0) {
-		err = orinoco_set_key(priv, index, ORINOCO_ALG_WEP, keybuf,
-				      erq->length, NULL, 0);
-	}
-	priv->tx_key = setindex;
-
-	/* Try fast key change if connected and only keys are changed */
-	if ((priv->encode_alg == encode_alg) &&
-	    (priv->wep_restrict == restricted) &&
-	    netif_carrier_ok(dev)) {
-		err = __orinoco_hw_setup_wepkeys(priv);
-		/* No need to commit if successful */
-		goto out;
-	}
-
-	priv->encode_alg = encode_alg;
-	priv->wep_restrict = restricted;
-
- out:
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_ioctl_getiwencode(struct net_device *dev,
-				     struct iw_request_info *info,
-				     union iwreq_data *wrqu,
-				     char *keybuf)
-{
-	struct iw_point *erq = &wrqu->encoding;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int index = (erq->flags & IW_ENCODE_INDEX) - 1;
-	unsigned long flags;
-
-	if (!priv->has_wep)
-		return -EOPNOTSUPP;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
-		index = priv->tx_key;
-
-	erq->flags = 0;
-	if (!priv->encode_alg)
-		erq->flags |= IW_ENCODE_DISABLED;
-	erq->flags |= index + 1;
-
-	if (priv->wep_restrict)
-		erq->flags |= IW_ENCODE_RESTRICTED;
-	else
-		erq->flags |= IW_ENCODE_OPEN;
-
-	erq->length = priv->keys[index].key_len;
-
-	memcpy(keybuf, priv->keys[index].key, erq->length);
-
-	orinoco_unlock(priv, &flags);
-	return 0;
-}
-
-static int orinoco_ioctl_setessid(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu,
-				  char *essidbuf)
-{
-	struct iw_point *erq = &wrqu->essid;
-	struct orinoco_private *priv = ndev_priv(dev);
-	unsigned long flags;
-
-	/* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
-	 * anyway... - Jean II */
-
-	/* Hum... Should not use Wireless Extension constant (may change),
-	 * should use our own... - Jean II */
-	if (erq->length > IW_ESSID_MAX_SIZE)
-		return -E2BIG;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	/* NULL the string (for NULL termination & ESSID = ANY) - Jean II */
-	memset(priv->desired_essid, 0, sizeof(priv->desired_essid));
-
-	/* If not ANY, get the new ESSID */
-	if (erq->flags)
-		memcpy(priv->desired_essid, essidbuf, erq->length);
-
-	orinoco_unlock(priv, &flags);
-
-	return -EINPROGRESS;		/* Call commit handler */
-}
-
-static int orinoco_ioctl_getessid(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu,
-				  char *essidbuf)
-{
-	struct iw_point *erq = &wrqu->essid;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int active;
-	int err = 0;
-	unsigned long flags;
-
-	if (netif_running(dev)) {
-		err = orinoco_hw_get_essid(priv, &active, essidbuf);
-		if (err < 0)
-			return err;
-		erq->length = err;
-	} else {
-		if (orinoco_lock(priv, &flags) != 0)
-			return -EBUSY;
-		memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE);
-		erq->length = strlen(priv->desired_essid);
-		orinoco_unlock(priv, &flags);
-	}
-
-	erq->flags = 1;
-
-	return 0;
-}
-
-static int orinoco_ioctl_setfreq(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra)
-{
-	struct iw_freq *frq = &wrqu->freq;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int chan = -1;
-	unsigned long flags;
-	int err = -EINPROGRESS;		/* Call commit handler */
-
-	/* In infrastructure mode the AP sets the channel */
-	if (priv->iw_mode == NL80211_IFTYPE_STATION)
-		return -EBUSY;
-
-	if ((frq->e == 0) && (frq->m <= 1000)) {
-		/* Setting by channel number */
-		chan = frq->m;
-	} else {
-		/* Setting by frequency */
-		int denom = 1;
-		int i;
-
-		/* Calculate denominator to rescale to MHz */
-		for (i = 0; i < (6 - frq->e); i++)
-			denom *= 10;
-
-		chan = ieee80211_frequency_to_channel(frq->m / denom);
-	}
-
-	if ((chan < 1) || (chan > NUM_CHANNELS) ||
-	     !(priv->channel_mask & (1 << (chan - 1))))
-		return -EINVAL;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	priv->channel = chan;
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
-		/* Fast channel change - no commit if successful */
-		struct hermes *hw = &priv->hw;
-		err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
-					    HERMES_TEST_SET_CHANNEL,
-					chan, NULL);
-	}
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_ioctl_getfreq(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra)
-{
-	struct iw_freq *frq = &wrqu->freq;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int tmp;
-
-	/* Locking done in there */
-	tmp = orinoco_hw_get_freq(priv);
-	if (tmp < 0)
-		return tmp;
-
-	frq->m = tmp * 100000;
-	frq->e = 1;
-
-	return 0;
-}
-
-static int orinoco_ioctl_getsens(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra)
-{
-	struct iw_param *srq = &wrqu->sens;
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct hermes *hw = &priv->hw;
-	u16 val;
-	int err;
-	unsigned long flags;
-
-	if (!priv->has_sensitivity)
-		return -EOPNOTSUPP;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-	err = hermes_read_wordrec(hw, USER_BAP,
-				  HERMES_RID_CNFSYSTEMSCALE, &val);
-	orinoco_unlock(priv, &flags);
-
-	if (err)
-		return err;
-
-	srq->value = val;
-	srq->fixed = 0; /* auto */
-
-	return 0;
-}
-
-static int orinoco_ioctl_setsens(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra)
-{
-	struct iw_param *srq = &wrqu->sens;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int val = srq->value;
-	unsigned long flags;
-
-	if (!priv->has_sensitivity)
-		return -EOPNOTSUPP;
-
-	if ((val < 1) || (val > 3))
-		return -EINVAL;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-	priv->ap_density = val;
-	orinoco_unlock(priv, &flags);
-
-	return -EINPROGRESS;		/* Call commit handler */
-}
-
-static int orinoco_ioctl_setrate(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra)
-{
-	struct iw_param *rrq = &wrqu->bitrate;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int ratemode;
-	int bitrate; /* 100s of kilobits */
-	unsigned long flags;
-
-	/* As the user space doesn't know our highest rate, it uses -1
-	 * to ask us to set the highest rate.  Test it using "iwconfig
-	 * ethX rate auto" - Jean II */
-	if (rrq->value == -1)
-		bitrate = 110;
-	else {
-		if (rrq->value % 100000)
-			return -EINVAL;
-		bitrate = rrq->value / 100000;
-	}
-
-	ratemode = orinoco_get_bitratemode(bitrate, !rrq->fixed);
-
-	if (ratemode == -1)
-		return -EINVAL;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-	priv->bitratemode = ratemode;
-	orinoco_unlock(priv, &flags);
-
-	return -EINPROGRESS;
-}
-
-static int orinoco_ioctl_getrate(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra)
-{
-	struct iw_param *rrq = &wrqu->bitrate;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int err = 0;
-	int bitrate, automatic;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	orinoco_get_ratemode_cfg(priv->bitratemode, &bitrate, &automatic);
-
-	/* If the interface is running we try to find more about the
-	   current mode */
-	if (netif_running(dev)) {
-		int act_bitrate;
-		int lerr;
-
-		/* Ignore errors if we can't get the actual bitrate */
-		lerr = orinoco_hw_get_act_bitrate(priv, &act_bitrate);
-		if (!lerr)
-			bitrate = act_bitrate;
-	}
-
-	orinoco_unlock(priv, &flags);
-
-	rrq->value = bitrate;
-	rrq->fixed = !automatic;
-	rrq->disabled = 0;
-
-	return err;
-}
-
-static int orinoco_ioctl_setpower(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu,
-				  char *extra)
-{
-	struct iw_param *prq = &wrqu->power;
-	struct orinoco_private *priv = ndev_priv(dev);
-	int err = -EINPROGRESS;		/* Call commit handler */
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	if (prq->disabled) {
-		priv->pm_on = 0;
-	} else {
-		switch (prq->flags & IW_POWER_MODE) {
-		case IW_POWER_UNICAST_R:
-			priv->pm_mcast = 0;
-			priv->pm_on = 1;
-			break;
-		case IW_POWER_ALL_R:
-			priv->pm_mcast = 1;
-			priv->pm_on = 1;
-			break;
-		case IW_POWER_ON:
-			/* No flags : but we may have a value - Jean II */
-			break;
-		default:
-			err = -EINVAL;
-			goto out;
-		}
-
-		if (prq->flags & IW_POWER_TIMEOUT) {
-			priv->pm_on = 1;
-			priv->pm_timeout = prq->value / 1000;
-		}
-		if (prq->flags & IW_POWER_PERIOD) {
-			priv->pm_on = 1;
-			priv->pm_period = prq->value / 1000;
-		}
-		/* It's valid to not have a value if we are just toggling
-		 * the flags... Jean II */
-		if (!priv->pm_on) {
-			err = -EINVAL;
-			goto out;
-		}
-	}
-
- out:
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_ioctl_getpower(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu,
-				  char *extra)
-{
-	struct iw_param *prq = &wrqu->power;
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct hermes *hw = &priv->hw;
-	int err = 0;
-	u16 enable, period, timeout, mcast;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	err = hermes_read_wordrec(hw, USER_BAP,
-				  HERMES_RID_CNFPMENABLED, &enable);
-	if (err)
-		goto out;
-
-	err = hermes_read_wordrec(hw, USER_BAP,
-				  HERMES_RID_CNFMAXSLEEPDURATION, &period);
-	if (err)
-		goto out;
-
-	err = hermes_read_wordrec(hw, USER_BAP,
-				  HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
-	if (err)
-		goto out;
-
-	err = hermes_read_wordrec(hw, USER_BAP,
-				  HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
-	if (err)
-		goto out;
-
-	prq->disabled = !enable;
-	/* Note : by default, display the period */
-	if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
-		prq->flags = IW_POWER_TIMEOUT;
-		prq->value = timeout * 1000;
-	} else {
-		prq->flags = IW_POWER_PERIOD;
-		prq->value = period * 1000;
-	}
-	if (mcast)
-		prq->flags |= IW_POWER_ALL_R;
-	else
-		prq->flags |= IW_POWER_UNICAST_R;
-
- out:
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_ioctl_set_encodeext(struct net_device *dev,
-				       struct iw_request_info *info,
-				       union iwreq_data *wrqu,
-				       char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, alg = ext->alg, set_key = 1;
-	unsigned long flags;
-	int err = -EINVAL;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	/* Determine and validate the key index */
-	idx = encoding->flags & IW_ENCODE_INDEX;
-	if (idx) {
-		if ((idx < 1) || (idx > 4))
-			goto out;
-		idx--;
-	} else
-		idx = priv->tx_key;
-
-	if (encoding->flags & IW_ENCODE_DISABLED)
-		alg = IW_ENCODE_ALG_NONE;
-
-	if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) {
-		/* Clear any TKIP TX key we had */
-		(void) orinoco_clear_tkip_key(priv, priv->tx_key);
-	}
-
-	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
-		priv->tx_key = idx;
-		set_key = ((alg == IW_ENCODE_ALG_TKIP) ||
-			   (ext->key_len > 0)) ? 1 : 0;
-	}
-
-	if (set_key) {
-		/* Set the requested key first */
-		switch (alg) {
-		case IW_ENCODE_ALG_NONE:
-			priv->encode_alg = ORINOCO_ALG_NONE;
-			err = orinoco_set_key(priv, idx, ORINOCO_ALG_NONE,
-					      NULL, 0, NULL, 0);
-			break;
-
-		case IW_ENCODE_ALG_WEP:
-			if (ext->key_len <= 0)
-				goto out;
-
-			priv->encode_alg = ORINOCO_ALG_WEP;
-			err = orinoco_set_key(priv, idx, ORINOCO_ALG_WEP,
-					      ext->key, ext->key_len, NULL, 0);
-			break;
-
-		case IW_ENCODE_ALG_TKIP:
-		{
-			u8 *tkip_iv = NULL;
-
-			if (!priv->has_wpa ||
-			    (ext->key_len > sizeof(struct orinoco_tkip_key)))
-				goto out;
-
-			priv->encode_alg = ORINOCO_ALG_TKIP;
-
-			if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
-				tkip_iv = &ext->rx_seq[0];
-
-			err = orinoco_set_key(priv, idx, ORINOCO_ALG_TKIP,
-					      ext->key, ext->key_len, tkip_iv,
-					      ORINOCO_SEQ_LEN);
-
-			err = __orinoco_hw_set_tkip_key(priv, idx,
-				 ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY,
-				 priv->keys[idx].key, priv->keys[idx].key_len,
-				 tkip_iv, ORINOCO_SEQ_LEN, NULL, 0);
-			if (err)
-				printk(KERN_ERR "%s: Error %d setting TKIP key"
-				       "\n", dev->name, err);
-
-			goto out;
-		}
-		default:
-			goto out;
-		}
-	}
-	err = -EINPROGRESS;
- out:
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_ioctl_get_encodeext(struct net_device *dev,
-				       struct iw_request_info *info,
-				       union iwreq_data *wrqu,
-				       char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, max_key_len;
-	unsigned long flags;
-	int err;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	err = -EINVAL;
-	max_key_len = encoding->length - sizeof(*ext);
-	if (max_key_len < 0)
-		goto out;
-
-	idx = encoding->flags & IW_ENCODE_INDEX;
-	if (idx) {
-		if ((idx < 1) || (idx > 4))
-			goto out;
-		idx--;
-	} else
-		idx = priv->tx_key;
-
-	encoding->flags = idx + 1;
-	memset(ext, 0, sizeof(*ext));
-
-	switch (priv->encode_alg) {
-	case ORINOCO_ALG_NONE:
-		ext->alg = IW_ENCODE_ALG_NONE;
-		ext->key_len = 0;
-		encoding->flags |= IW_ENCODE_DISABLED;
-		break;
-	case ORINOCO_ALG_WEP:
-		ext->alg = IW_ENCODE_ALG_WEP;
-		ext->key_len = min(priv->keys[idx].key_len, max_key_len);
-		memcpy(ext->key, priv->keys[idx].key, ext->key_len);
-		encoding->flags |= IW_ENCODE_ENABLED;
-		break;
-	case ORINOCO_ALG_TKIP:
-		ext->alg = IW_ENCODE_ALG_TKIP;
-		ext->key_len = min(priv->keys[idx].key_len, max_key_len);
-		memcpy(ext->key, priv->keys[idx].key, ext->key_len);
-		encoding->flags |= IW_ENCODE_ENABLED;
-		break;
-	}
-
-	err = 0;
- out:
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_ioctl_set_auth(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct hermes *hw = &priv->hw;
-	struct iw_param *param = &wrqu->param;
-	unsigned long flags;
-	int ret = -EINPROGRESS;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_WPA_VERSION:
-	case IW_AUTH_CIPHER_PAIRWISE:
-	case IW_AUTH_CIPHER_GROUP:
-	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-	case IW_AUTH_PRIVACY_INVOKED:
-	case IW_AUTH_DROP_UNENCRYPTED:
-		/*
-		 * orinoco does not use these parameters
-		 */
-		break;
-
-	case IW_AUTH_MFP:
-		/* Management Frame Protection not supported.
-		 * Only fail if set to required.
-		 */
-		if (param->value == IW_AUTH_MFP_REQUIRED)
-			ret = -EINVAL;
-		break;
-
-	case IW_AUTH_KEY_MGMT:
-		/* wl_lkm implies value 2 == PSK for Hermes I
-		 * which ties in with WEXT
-		 * no other hints tho :(
-		 */
-		priv->key_mgmt = param->value;
-		break;
-
-	case IW_AUTH_TKIP_COUNTERMEASURES:
-		/* When countermeasures are enabled, shut down the
-		 * card; when disabled, re-enable the card. This must
-		 * take effect immediately.
-		 *
-		 * TODO: Make sure that the EAPOL message is getting
-		 *       out before card disabled
-		 */
-		if (param->value) {
-			priv->tkip_cm_active = 1;
-			ret = hermes_disable_port(hw, 0);
-		} else {
-			priv->tkip_cm_active = 0;
-			ret = hermes_enable_port(hw, 0);
-		}
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-		if (param->value & IW_AUTH_ALG_SHARED_KEY)
-			priv->wep_restrict = 1;
-		else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
-			priv->wep_restrict = 0;
-		else
-			ret = -EINVAL;
-		break;
-
-	case IW_AUTH_WPA_ENABLED:
-		if (priv->has_wpa) {
-			priv->wpa_enabled = param->value ? 1 : 0;
-		} else {
-			if (param->value)
-				ret = -EOPNOTSUPP;
-			/* else silently accept disable of WPA */
-			priv->wpa_enabled = 0;
-		}
-		break;
-
-	default:
-		ret = -EOPNOTSUPP;
-	}
-
-	orinoco_unlock(priv, &flags);
-	return ret;
-}
-
-static int orinoco_ioctl_get_auth(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct iw_param *param = &wrqu->param;
-	unsigned long flags;
-	int ret = 0;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_KEY_MGMT:
-		param->value = priv->key_mgmt;
-		break;
-
-	case IW_AUTH_TKIP_COUNTERMEASURES:
-		param->value = priv->tkip_cm_active;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-		if (priv->wep_restrict)
-			param->value = IW_AUTH_ALG_SHARED_KEY;
-		else
-			param->value = IW_AUTH_ALG_OPEN_SYSTEM;
-		break;
-
-	case IW_AUTH_WPA_ENABLED:
-		param->value = priv->wpa_enabled;
-		break;
-
-	default:
-		ret = -EOPNOTSUPP;
-	}
-
-	orinoco_unlock(priv, &flags);
-	return ret;
-}
-
-static int orinoco_ioctl_set_genie(struct net_device *dev,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	u8 *buf;
-	unsigned long flags;
-
-	/* cut off at IEEE80211_MAX_DATA_LEN */
-	if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
-	    (wrqu->data.length && (extra == NULL)))
-		return -EINVAL;
-
-	if (wrqu->data.length) {
-		buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL);
-		if (buf == NULL)
-			return -ENOMEM;
-	} else
-		buf = NULL;
-
-	if (orinoco_lock(priv, &flags) != 0) {
-		kfree(buf);
-		return -EBUSY;
-	}
-
-	kfree(priv->wpa_ie);
-	priv->wpa_ie = buf;
-	priv->wpa_ie_len = wrqu->data.length;
-
-	if (priv->wpa_ie) {
-		/* Looks like wl_lkm wants to check the auth alg, and
-		 * somehow pass it to the firmware.
-		 * Instead it just calls the key mgmt rid
-		 *   - we do this in set auth.
-		 */
-	}
-
-	orinoco_unlock(priv, &flags);
-	return 0;
-}
-
-static int orinoco_ioctl_get_genie(struct net_device *dev,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	unsigned long flags;
-	int err = 0;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) {
-		wrqu->data.length = 0;
-		goto out;
-	}
-
-	if (wrqu->data.length < priv->wpa_ie_len) {
-		err = -E2BIG;
-		goto out;
-	}
-
-	wrqu->data.length = priv->wpa_ie_len;
-	memcpy(extra, priv->wpa_ie, priv->wpa_ie_len);
-
-out:
-	orinoco_unlock(priv, &flags);
-	return err;
-}
-
-static int orinoco_ioctl_set_mlme(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct iw_mlme *mlme = (struct iw_mlme *)extra;
-	unsigned long flags;
-	int ret = 0;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	switch (mlme->cmd) {
-	case IW_MLME_DEAUTH:
-		/* silently ignore */
-		break;
-
-	case IW_MLME_DISASSOC:
-
-		ret = orinoco_hw_disassociate(priv, mlme->addr.sa_data,
-					      mlme->reason_code);
-		break;
-
-	default:
-		ret = -EOPNOTSUPP;
-	}
-
-	orinoco_unlock(priv, &flags);
-	return ret;
-}
-
-static int orinoco_ioctl_reset(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu,
-			       char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) {
-		printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name);
-
-		/* Firmware reset */
-		orinoco_reset(&priv->reset_work);
-	} else {
-		printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
-
-		schedule_work(&priv->reset_work);
-	}
-
-	return 0;
-}
-
-static int orinoco_ioctl_setibssport(struct net_device *dev,
-				     struct iw_request_info *info,
-				     union iwreq_data *wrqu,
-				     char *extra)
-
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	int val = *((int *) extra);
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	priv->ibss_port = val;
-
-	/* Actually update the mode we are using */
-	set_port_type(priv);
-
-	orinoco_unlock(priv, &flags);
-	return -EINPROGRESS;		/* Call commit handler */
-}
-
-static int orinoco_ioctl_getibssport(struct net_device *dev,
-				     struct iw_request_info *info,
-				     union iwreq_data *wrqu,
-				     char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	int *val = (int *) extra;
-
-	*val = priv->ibss_port;
-	return 0;
-}
-
-static int orinoco_ioctl_setport3(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu,
-				  char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	int val = *((int *) extra);
-	int err = 0;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	switch (val) {
-	case 0: /* Try to do IEEE ad-hoc mode */
-		if (!priv->has_ibss) {
-			err = -EINVAL;
-			break;
-		}
-		priv->prefer_port3 = 0;
-
-		break;
-
-	case 1: /* Try to do Lucent proprietary ad-hoc mode */
-		if (!priv->has_port3) {
-			err = -EINVAL;
-			break;
-		}
-		priv->prefer_port3 = 1;
-		break;
-
-	default:
-		err = -EINVAL;
-	}
-
-	if (!err) {
-		/* Actually update the mode we are using */
-		set_port_type(priv);
-		err = -EINPROGRESS;
-	}
-
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_ioctl_getport3(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu,
-				  char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	int *val = (int *) extra;
-
-	*val = priv->prefer_port3;
-	return 0;
-}
-
-static int orinoco_ioctl_setpreamble(struct net_device *dev,
-				     struct iw_request_info *info,
-				     union iwreq_data *wrqu,
-				     char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	unsigned long flags;
-	int val;
-
-	if (!priv->has_preamble)
-		return -EOPNOTSUPP;
-
-	/* 802.11b has recently defined some short preamble.
-	 * Basically, the Phy header has been reduced in size.
-	 * This increase performance, especially at high rates
-	 * (the preamble is transmitted at 1Mb/s), unfortunately
-	 * this give compatibility troubles... - Jean II */
-	val = *((int *) extra);
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	if (val)
-		priv->preamble = 1;
-	else
-		priv->preamble = 0;
-
-	orinoco_unlock(priv, &flags);
-
-	return -EINPROGRESS;		/* Call commit handler */
-}
-
-static int orinoco_ioctl_getpreamble(struct net_device *dev,
-				     struct iw_request_info *info,
-				     union iwreq_data *wrqu,
-				     char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	int *val = (int *) extra;
-
-	if (!priv->has_preamble)
-		return -EOPNOTSUPP;
-
-	*val = priv->preamble;
-	return 0;
-}
-
-/* ioctl interface to hermes_read_ltv()
- * To use with iwpriv, pass the RID as the token argument, e.g.
- * iwpriv get_rid [0xfc00]
- * At least Wireless Tools 25 is required to use iwpriv.
- * For Wireless Tools 25 and 26 append "dummy" are the end. */
-static int orinoco_ioctl_getrid(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu,
-				char *extra)
-{
-	struct iw_point *data = &wrqu->data;
-	struct orinoco_private *priv = ndev_priv(dev);
-	struct hermes *hw = &priv->hw;
-	int rid = data->flags;
-	u16 length;
-	int err;
-	unsigned long flags;
-
-	/* It's a "get" function, but we don't want users to access the
-	 * WEP key and other raw firmware data */
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	if (rid < 0xfc00 || rid > 0xffff)
-		return -EINVAL;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	err = hw->ops->read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
-				extra);
-	if (err)
-		goto out;
-
-	data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length),
-			     MAX_RID_LEN);
-
- out:
-	orinoco_unlock(priv, &flags);
-	return err;
-}
-
-
-/* Commit handler, called after set operations */
-static int orinoco_ioctl_commit(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu,
-				char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	unsigned long flags;
-	int err = 0;
-
-	if (!priv->open)
-		return 0;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return err;
-
-	err = orinoco_commit(priv);
-
-	orinoco_unlock(priv, &flags);
-	return err;
-}
-
-static const struct iw_priv_args orinoco_privtab[] = {
-	{ SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
-	{ SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
-	{ SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	  0, "set_port3" },
-	{ SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	  "get_port3" },
-	{ SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	  0, "set_preamble" },
-	{ SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	  "get_preamble" },
-	{ SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	  0, "set_ibssport" },
-	{ SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	  "get_ibssport" },
-	{ SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN,
-	  "get_rid" },
-};
-
-
-/*
- * Structures to export the Wireless Handlers
- */
-
-static const iw_handler	orinoco_handler[] = {
-	IW_HANDLER(SIOCSIWCOMMIT,	orinoco_ioctl_commit),
-	IW_HANDLER(SIOCGIWNAME,		cfg80211_wext_giwname),
-	IW_HANDLER(SIOCSIWFREQ,		orinoco_ioctl_setfreq),
-	IW_HANDLER(SIOCGIWFREQ,		orinoco_ioctl_getfreq),
-	IW_HANDLER(SIOCSIWMODE,		cfg80211_wext_siwmode),
-	IW_HANDLER(SIOCGIWMODE,		cfg80211_wext_giwmode),
-	IW_HANDLER(SIOCSIWSENS,		orinoco_ioctl_setsens),
-	IW_HANDLER(SIOCGIWSENS,		orinoco_ioctl_getsens),
-	IW_HANDLER(SIOCGIWRANGE,	cfg80211_wext_giwrange),
-	IW_HANDLER(SIOCSIWSPY,		iw_handler_set_spy),
-	IW_HANDLER(SIOCGIWSPY,		iw_handler_get_spy),
-	IW_HANDLER(SIOCSIWTHRSPY,	iw_handler_set_thrspy),
-	IW_HANDLER(SIOCGIWTHRSPY,	iw_handler_get_thrspy),
-	IW_HANDLER(SIOCSIWAP,		orinoco_ioctl_setwap),
-	IW_HANDLER(SIOCGIWAP,		orinoco_ioctl_getwap),
-	IW_HANDLER(SIOCSIWSCAN,		cfg80211_wext_siwscan),
-	IW_HANDLER(SIOCGIWSCAN,		cfg80211_wext_giwscan),
-	IW_HANDLER(SIOCSIWESSID,	orinoco_ioctl_setessid),
-	IW_HANDLER(SIOCGIWESSID,	orinoco_ioctl_getessid),
-	IW_HANDLER(SIOCSIWRATE,		orinoco_ioctl_setrate),
-	IW_HANDLER(SIOCGIWRATE,		orinoco_ioctl_getrate),
-	IW_HANDLER(SIOCSIWRTS,		cfg80211_wext_siwrts),
-	IW_HANDLER(SIOCGIWRTS,		cfg80211_wext_giwrts),
-	IW_HANDLER(SIOCSIWFRAG,		cfg80211_wext_siwfrag),
-	IW_HANDLER(SIOCGIWFRAG,		cfg80211_wext_giwfrag),
-	IW_HANDLER(SIOCGIWRETRY,	cfg80211_wext_giwretry),
-	IW_HANDLER(SIOCSIWENCODE,	orinoco_ioctl_setiwencode),
-	IW_HANDLER(SIOCGIWENCODE,	orinoco_ioctl_getiwencode),
-	IW_HANDLER(SIOCSIWPOWER,	orinoco_ioctl_setpower),
-	IW_HANDLER(SIOCGIWPOWER,	orinoco_ioctl_getpower),
-	IW_HANDLER(SIOCSIWGENIE,	orinoco_ioctl_set_genie),
-	IW_HANDLER(SIOCGIWGENIE,	orinoco_ioctl_get_genie),
-	IW_HANDLER(SIOCSIWMLME,		orinoco_ioctl_set_mlme),
-	IW_HANDLER(SIOCSIWAUTH,		orinoco_ioctl_set_auth),
-	IW_HANDLER(SIOCGIWAUTH,		orinoco_ioctl_get_auth),
-	IW_HANDLER(SIOCSIWENCODEEXT,	orinoco_ioctl_set_encodeext),
-	IW_HANDLER(SIOCGIWENCODEEXT,	orinoco_ioctl_get_encodeext),
-};
-
-
-/*
-  Added typecasting since we no longer use iwreq_data -- Moustafa
- */
-static const iw_handler	orinoco_private_handler[] = {
-	[0] = orinoco_ioctl_reset,
-	[1] = orinoco_ioctl_reset,
-	[2] = orinoco_ioctl_setport3,
-	[3] = orinoco_ioctl_getport3,
-	[4] = orinoco_ioctl_setpreamble,
-	[5] = orinoco_ioctl_getpreamble,
-	[6] = orinoco_ioctl_setibssport,
-	[7] = orinoco_ioctl_getibssport,
-	[9] = orinoco_ioctl_getrid,
-};
-
-const struct iw_handler_def orinoco_handler_def = {
-	.num_standard = ARRAY_SIZE(orinoco_handler),
-	.num_private = ARRAY_SIZE(orinoco_private_handler),
-	.num_private_args = ARRAY_SIZE(orinoco_privtab),
-	.standard = orinoco_handler,
-	.private = orinoco_private_handler,
-	.private_args = orinoco_privtab,
-	.get_wireless_stats = orinoco_get_wireless_stats,
-};
diff --git a/drivers/net/wireless/intersil/orinoco/wext.h b/drivers/net/wireless/intersil/orinoco/wext.h
deleted file mode 100644
index 1479f4e26d..0000000000
--- a/drivers/net/wireless/intersil/orinoco/wext.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Wireless extensions support.
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_WEXT_H_
-#define _ORINOCO_WEXT_H_
-
-#include <net/iw_handler.h>
-
-/* Structure defining all our WEXT handlers */
-extern const struct iw_handler_def orinoco_handler_def;
-
-#endif /* _ORINOCO_WEXT_H_ */
diff --git a/drivers/net/wireless/intersil/p54/fwio.c b/drivers/net/wireless/intersil/p54/fwio.c
index b52cce3811..c4fe70e05b 100644
--- a/drivers/net/wireless/intersil/p54/fwio.c
+++ b/drivers/net/wireless/intersil/p54/fwio.c
@@ -125,7 +125,7 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 			   "FW rev %s - Softmac protocol %x.%x\n",
 			   fw_version, priv->fw_var >> 8, priv->fw_var & 0xff);
 		snprintf(dev->wiphy->fw_version, sizeof(dev->wiphy->fw_version),
-				"%s - %x.%x", fw_version,
+				"%.19s - %x.%x", fw_version,
 				priv->fw_var >> 8, priv->fw_var & 0xff);
 	}
 
diff --git a/drivers/net/wireless/intersil/p54/p54spi.c b/drivers/net/wireless/intersil/p54/p54spi.c
index ce0179b8ab..0073b5e0f9 100644
--- a/drivers/net/wireless/intersil/p54/p54spi.c
+++ b/drivers/net/wireless/intersil/p54/p54spi.c
@@ -700,6 +700,7 @@ static struct spi_driver p54spi_driver = {
 
 module_spi_driver(p54spi_driver);
 
+MODULE_DESCRIPTION("Prism54 SPI wireless driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
 MODULE_ALIAS("spi:cx3110x");