Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 259 insertions, 0 deletions

diff --git a/drivers/remoteproc/meson_mx_ao_arc.c b/drivers/remoteproc/meson_mx_ao_arc.c
new file mode 100644
index 0000000000..f6744b5383
--- /dev/null
+++ b/drivers/remoteproc/meson_mx_ao_arc.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/remoteproc.h>
+#include <linux/reset.h>
+#include <linux/sizes.h>
+
+#include "remoteproc_internal.h"
+
+#define AO_REMAP_REG0						0x0
+#define AO_REMAP_REG0_REMAP_AHB_SRAM_BITS_17_14_FOR_ARM_CPU	GENMASK(3, 0)
+
+#define AO_REMAP_REG1						0x4
+#define AO_REMAP_REG1_MOVE_AHB_SRAM_TO_0X0_INSTEAD_OF_DDR	BIT(4)
+#define AO_REMAP_REG1_REMAP_AHB_SRAM_BITS_17_14_FOR_MEDIA_CPU	GENMASK(3, 0)
+
+#define AO_CPU_CNTL						0x0
+#define AO_CPU_CNTL_AHB_SRAM_BITS_31_20				GENMASK(28, 16)
+#define AO_CPU_CNTL_HALT					BIT(9)
+#define AO_CPU_CNTL_UNKNONWN					BIT(8)
+#define AO_CPU_CNTL_RUN						BIT(0)
+
+#define AO_CPU_STAT						0x4
+
+#define AO_SECURE_REG0						0x0
+#define AO_SECURE_REG0_AHB_SRAM_BITS_19_12			GENMASK(15, 8)
+
+/* Only bits [31:20] and [17:14] are usable, all other bits must be zero */
+#define MESON_AO_RPROC_SRAM_USABLE_BITS				0xfff3c000ULL
+
+#define MESON_AO_RPROC_MEMORY_OFFSET				0x10000000
+
+struct meson_mx_ao_arc_rproc_priv {
+	void __iomem		*remap_base;
+	void __iomem		*cpu_base;
+	unsigned long		sram_va;
+	phys_addr_t		sram_pa;
+	size_t			sram_size;
+	struct gen_pool		*sram_pool;
+	struct reset_control	*arc_reset;
+	struct clk		*arc_pclk;
+	struct regmap		*secbus2_regmap;
+};
+
+static int meson_mx_ao_arc_rproc_start(struct rproc *rproc)
+{
+	struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv;
+	phys_addr_t translated_sram_addr;
+	u32 tmp;
+	int ret;
+
+	ret = clk_prepare_enable(priv->arc_pclk);
+	if (ret)
+		return ret;
+
+	tmp = FIELD_PREP(AO_REMAP_REG0_REMAP_AHB_SRAM_BITS_17_14_FOR_ARM_CPU,
+			 priv->sram_pa >> 14);
+	writel(tmp, priv->remap_base + AO_REMAP_REG0);
+
+	/*
+	 * The SRAM content as seen by the ARC core always starts at 0x0
+	 * regardless of the value given here (this was discovered by trial and
+	 * error). For SoCs older than Meson6 we probably have to set
+	 * AO_REMAP_REG1_MOVE_AHB_SRAM_TO_0X0_INSTEAD_OF_DDR to achieve the
+	 * same. (At least) For Meson8 and newer that bit must not be set.
+	 */
+	writel(0x0, priv->remap_base + AO_REMAP_REG1);
+
+	regmap_update_bits(priv->secbus2_regmap, AO_SECURE_REG0,
+			   AO_SECURE_REG0_AHB_SRAM_BITS_19_12,
+			   FIELD_PREP(AO_SECURE_REG0_AHB_SRAM_BITS_19_12,
+				      priv->sram_pa >> 12));
+
+	ret = reset_control_reset(priv->arc_reset);
+	if (ret) {
+		clk_disable_unprepare(priv->arc_pclk);
+		return ret;
+	}
+
+	usleep_range(10, 100);
+
+	/*
+	 * Convert from 0xd9000000 to 0xc9000000 as the vendor driver does.
+	 * This only seems to be relevant for the AO_CPU_CNTL register. It is
+	 * unknown why this is needed.
+	 */
+	translated_sram_addr = priv->sram_pa - MESON_AO_RPROC_MEMORY_OFFSET;
+
+	tmp = FIELD_PREP(AO_CPU_CNTL_AHB_SRAM_BITS_31_20,
+			 translated_sram_addr >> 20);
+	tmp |= AO_CPU_CNTL_UNKNONWN | AO_CPU_CNTL_RUN;
+	writel(tmp, priv->cpu_base + AO_CPU_CNTL);
+
+	usleep_range(20, 200);
+
+	return 0;
+}
+
+static int meson_mx_ao_arc_rproc_stop(struct rproc *rproc)
+{
+	struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv;
+
+	writel(AO_CPU_CNTL_HALT, priv->cpu_base + AO_CPU_CNTL);
+
+	clk_disable_unprepare(priv->arc_pclk);
+
+	return 0;
+}
+
+static void *meson_mx_ao_arc_rproc_da_to_va(struct rproc *rproc, u64 da,
+					    size_t len, bool *is_iomem)
+{
+	struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv;
+
+	/* The memory from the ARC core's perspective always starts at 0x0. */
+	if ((da + len) > priv->sram_size)
+		return NULL;
+
+	return (void *)priv->sram_va + da;
+}
+
+static struct rproc_ops meson_mx_ao_arc_rproc_ops = {
+	.start		= meson_mx_ao_arc_rproc_start,
+	.stop		= meson_mx_ao_arc_rproc_stop,
+	.da_to_va	= meson_mx_ao_arc_rproc_da_to_va,
+	.get_boot_addr	= rproc_elf_get_boot_addr,
+	.load		= rproc_elf_load_segments,
+	.sanity_check	= rproc_elf_sanity_check,
+};
+
+static int meson_mx_ao_arc_rproc_probe(struct platform_device *pdev)
+{
+	struct meson_mx_ao_arc_rproc_priv *priv;
+	struct device *dev = &pdev->dev;
+	const char *fw_name = NULL;
+	struct rproc *rproc;
+	int ret;
+
+	device_property_read_string(dev, "firmware-name", &fw_name);
+
+	rproc = devm_rproc_alloc(dev, "meson-mx-ao-arc",
+				 &meson_mx_ao_arc_rproc_ops, fw_name,
+				 sizeof(*priv));
+	if (!rproc)
+		return -ENOMEM;
+
+	rproc->has_iommu = false;
+	priv = rproc->priv;
+
+	priv->sram_pool = of_gen_pool_get(dev->of_node, "sram", 0);
+	if (!priv->sram_pool) {
+		dev_err(dev, "Could not get SRAM pool\n");
+		return -ENODEV;
+	}
+
+	priv->sram_size = gen_pool_avail(priv->sram_pool);
+
+	priv->sram_va = gen_pool_alloc(priv->sram_pool, priv->sram_size);
+	if (!priv->sram_va) {
+		dev_err(dev, "Could not alloc memory in SRAM pool\n");
+		return -ENOMEM;
+	}
+
+	priv->sram_pa = gen_pool_virt_to_phys(priv->sram_pool, priv->sram_va);
+	if (priv->sram_pa & ~MESON_AO_RPROC_SRAM_USABLE_BITS) {
+		dev_err(dev, "SRAM address contains unusable bits\n");
+		ret = -EINVAL;
+		goto err_free_genpool;
+	}
+
+	priv->secbus2_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
+							       "amlogic,secbus2");
+	if (IS_ERR(priv->secbus2_regmap)) {
+		dev_err(dev, "Failed to find SECBUS2 regmap\n");
+		ret = PTR_ERR(priv->secbus2_regmap);
+		goto err_free_genpool;
+	}
+
+	priv->remap_base = devm_platform_ioremap_resource_byname(pdev, "remap");
+	if (IS_ERR(priv->remap_base)) {
+		ret = PTR_ERR(priv->remap_base);
+		goto err_free_genpool;
+	}
+
+	priv->cpu_base = devm_platform_ioremap_resource_byname(pdev, "cpu");
+	if (IS_ERR(priv->cpu_base)) {
+		ret = PTR_ERR(priv->cpu_base);
+		goto err_free_genpool;
+	}
+
+	priv->arc_reset = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(priv->arc_reset)) {
+		dev_err(dev, "Failed to get ARC reset\n");
+		ret = PTR_ERR(priv->arc_reset);
+		goto err_free_genpool;
+	}
+
+	priv->arc_pclk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->arc_pclk)) {
+		dev_err(dev, "Failed to get the ARC PCLK\n");
+		ret = PTR_ERR(priv->arc_pclk);
+		goto err_free_genpool;
+	}
+
+	platform_set_drvdata(pdev, rproc);
+
+	ret = rproc_add(rproc);
+	if (ret)
+		goto err_free_genpool;
+
+	return 0;
+
+err_free_genpool:
+	gen_pool_free(priv->sram_pool, priv->sram_va, priv->sram_size);
+	return ret;
+}
+
+static void meson_mx_ao_arc_rproc_remove(struct platform_device *pdev)
+{
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv;
+
+	rproc_del(rproc);
+	gen_pool_free(priv->sram_pool, priv->sram_va, priv->sram_size);
+}
+
+static const struct of_device_id meson_mx_ao_arc_rproc_match[] = {
+	{ .compatible = "amlogic,meson8-ao-arc" },
+	{ .compatible = "amlogic,meson8b-ao-arc" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, meson_mx_ao_arc_rproc_match);
+
+static struct platform_driver meson_mx_ao_arc_rproc_driver = {
+	.probe = meson_mx_ao_arc_rproc_probe,
+	.remove_new = meson_mx_ao_arc_rproc_remove,
+	.driver = {
+		.name = "meson-mx-ao-arc-rproc",
+		.of_match_table = meson_mx_ao_arc_rproc_match,
+	},
+};
+module_platform_driver(meson_mx_ao_arc_rproc_driver);
+
+MODULE_DESCRIPTION("Amlogic Meson6/8/8b/8m2 AO ARC remote processor driver");
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_LICENSE("GPL v2");