Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 673 insertions, 0 deletions

diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
new file mode 100644
index 000000000..99b075085
--- /dev/null
+++ b/drivers/scsi/hpsa.h
@@ -0,0 +1,673 @@
+/*
+ *    Disk Array driver for HP Smart Array SAS controllers
+ *    Copyright (c) 2019-2020 Microchip Technology Inc. and its subsidiaries
+ *    Copyright 2016 Microsemi Corporation
+ *    Copyright 2014-2015 PMC-Sierra, Inc.
+ *    Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; version 2 of the License.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *    NON INFRINGEMENT.  See the GNU General Public License for more details.
+ *
+ *    Questions/Comments/Bugfixes to esc.storagedev@microsemi.com
+ *
+ */
+#ifndef HPSA_H
+#define HPSA_H
+
+#include <scsi/scsicam.h>
+
+#define IO_OK		0
+#define IO_ERROR	1
+
+struct ctlr_info;
+
+struct access_method {
+	void (*submit_command)(struct ctlr_info *h,
+		struct CommandList *c);
+	void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
+	bool (*intr_pending)(struct ctlr_info *h);
+	unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
+};
+
+/* for SAS hosts and SAS expanders */
+struct hpsa_sas_node {
+	struct device *parent_dev;
+	struct list_head port_list_head;
+};
+
+struct hpsa_sas_port {
+	struct list_head port_list_entry;
+	u64 sas_address;
+	struct sas_port *port;
+	int next_phy_index;
+	struct list_head phy_list_head;
+	struct hpsa_sas_node *parent_node;
+	struct sas_rphy *rphy;
+};
+
+struct hpsa_sas_phy {
+	struct list_head phy_list_entry;
+	struct sas_phy *phy;
+	struct hpsa_sas_port *parent_port;
+	bool added_to_port;
+};
+
+#define EXTERNAL_QD 128
+struct hpsa_scsi_dev_t {
+	unsigned int devtype;
+	int bus, target, lun;		/* as presented to the OS */
+	unsigned char scsi3addr[8];	/* as presented to the HW */
+	u8 physical_device : 1;
+	u8 expose_device;
+	u8 removed : 1;			/* device is marked for death */
+	u8 was_removed : 1;		/* device actually removed */
+#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
+	unsigned char device_id[16];    /* from inquiry pg. 0x83 */
+	u64 sas_address;
+	u64 eli;			/* from report diags. */
+	unsigned char vendor[8];        /* bytes 8-15 of inquiry data */
+	unsigned char model[16];        /* bytes 16-31 of inquiry data */
+	unsigned char rev;		/* byte 2 of inquiry data */
+	unsigned char raid_level;	/* from inquiry page 0xC1 */
+	unsigned char volume_offline;	/* discovered via TUR or VPD */
+	u16 queue_depth;		/* max queue_depth for this device */
+	atomic_t commands_outstanding;	/* track commands sent to device */
+	atomic_t ioaccel_cmds_out;	/* Only used for physical devices
+					 * counts commands sent to physical
+					 * device via "ioaccel" path.
+					 */
+	bool in_reset;
+	u32 ioaccel_handle;
+	u8 active_path_index;
+	u8 path_map;
+	u8 bay;
+	u8 box[8];
+	u16 phys_connector[8];
+	int offload_config;		/* I/O accel RAID offload configured */
+	int offload_enabled;		/* I/O accel RAID offload enabled */
+	int offload_to_be_enabled;
+	int hba_ioaccel_enabled;
+	int offload_to_mirror;		/* Send next I/O accelerator RAID
+					 * offload request to mirror drive
+					 */
+	struct raid_map_data raid_map;	/* I/O accelerator RAID map */
+
+	/*
+	 * Pointers from logical drive map indices to the phys drives that
+	 * make those logical drives.  Note, multiple logical drives may
+	 * share physical drives.  You can have for instance 5 physical
+	 * drives with 3 logical drives each using those same 5 physical
+	 * disks. We need these pointers for counting i/o's out to physical
+	 * devices in order to honor physical device queue depth limits.
+	 */
+	struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
+	int nphysical_disks;
+	int supports_aborts;
+	struct hpsa_sas_port *sas_port;
+	int external;   /* 1-from external array 0-not <0-unknown */
+};
+
+struct reply_queue_buffer {
+	u64 *head;
+	size_t size;
+	u8 wraparound;
+	u32 current_entry;
+	dma_addr_t busaddr;
+};
+
+#pragma pack(1)
+struct bmic_controller_parameters {
+	u8   led_flags;
+	u8   enable_command_list_verification;
+	u8   backed_out_write_drives;
+	u16  stripes_for_parity;
+	u8   parity_distribution_mode_flags;
+	u16  max_driver_requests;
+	u16  elevator_trend_count;
+	u8   disable_elevator;
+	u8   force_scan_complete;
+	u8   scsi_transfer_mode;
+	u8   force_narrow;
+	u8   rebuild_priority;
+	u8   expand_priority;
+	u8   host_sdb_asic_fix;
+	u8   pdpi_burst_from_host_disabled;
+	char software_name[64];
+	char hardware_name[32];
+	u8   bridge_revision;
+	u8   snapshot_priority;
+	u32  os_specific;
+	u8   post_prompt_timeout;
+	u8   automatic_drive_slamming;
+	u8   reserved1;
+	u8   nvram_flags;
+	u8   cache_nvram_flags;
+	u8   drive_config_flags;
+	u16  reserved2;
+	u8   temp_warning_level;
+	u8   temp_shutdown_level;
+	u8   temp_condition_reset;
+	u8   max_coalesce_commands;
+	u32  max_coalesce_delay;
+	u8   orca_password[4];
+	u8   access_id[16];
+	u8   reserved[356];
+};
+#pragma pack()
+
+struct ctlr_info {
+	unsigned int *reply_map;
+	int	ctlr;
+	char	devname[8];
+	char    *product_name;
+	struct pci_dev *pdev;
+	u32	board_id;
+	u64	sas_address;
+	void __iomem *vaddr;
+	unsigned long paddr;
+	int 	nr_cmds; /* Number of commands allowed on this controller */
+#define HPSA_CMDS_RESERVED_FOR_ABORTS 2
+#define HPSA_CMDS_RESERVED_FOR_DRIVER 1
+	struct CfgTable __iomem *cfgtable;
+	int	interrupts_enabled;
+	int 	max_commands;
+	int	last_collision_tag; /* tags are global */
+	atomic_t commands_outstanding;
+#	define PERF_MODE_INT	0
+#	define DOORBELL_INT	1
+#	define SIMPLE_MODE_INT	2
+#	define MEMQ_MODE_INT	3
+	unsigned int msix_vectors;
+	int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */
+	struct access_method access;
+
+	/* queue and queue Info */
+	unsigned int Qdepth;
+	unsigned int maxSG;
+	spinlock_t lock;
+	int maxsgentries;
+	u8 max_cmd_sg_entries;
+	int chainsize;
+	struct SGDescriptor **cmd_sg_list;
+	struct ioaccel2_sg_element **ioaccel2_cmd_sg_list;
+
+	/* pointers to command and error info pool */
+	struct CommandList 	*cmd_pool;
+	dma_addr_t		cmd_pool_dhandle;
+	struct io_accel1_cmd	*ioaccel_cmd_pool;
+	dma_addr_t		ioaccel_cmd_pool_dhandle;
+	struct io_accel2_cmd	*ioaccel2_cmd_pool;
+	dma_addr_t		ioaccel2_cmd_pool_dhandle;
+	struct ErrorInfo 	*errinfo_pool;
+	dma_addr_t		errinfo_pool_dhandle;
+	unsigned long  		*cmd_pool_bits;
+	int			scan_finished;
+	u8			scan_waiting : 1;
+	spinlock_t		scan_lock;
+	wait_queue_head_t	scan_wait_queue;
+
+	struct Scsi_Host *scsi_host;
+	spinlock_t devlock; /* to protect hba[ctlr]->dev[];  */
+	int ndevices; /* number of used elements in .dev[] array. */
+	struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES];
+	/*
+	 * Performant mode tables.
+	 */
+	u32 trans_support;
+	u32 trans_offset;
+	struct TransTable_struct __iomem *transtable;
+	unsigned long transMethod;
+
+	/* cap concurrent passthrus at some reasonable maximum */
+#define HPSA_MAX_CONCURRENT_PASSTHRUS (10)
+	atomic_t passthru_cmds_avail;
+
+	/*
+	 * Performant mode completion buffers
+	 */
+	size_t reply_queue_size;
+	struct reply_queue_buffer reply_queue[MAX_REPLY_QUEUES];
+	u8 nreply_queues;
+	u32 *blockFetchTable;
+	u32 *ioaccel1_blockFetchTable;
+	u32 *ioaccel2_blockFetchTable;
+	u32 __iomem *ioaccel2_bft2_regs;
+	unsigned char *hba_inquiry_data;
+	u32 driver_support;
+	u32 fw_support;
+	int ioaccel_support;
+	int ioaccel_maxsg;
+	u64 last_intr_timestamp;
+	u32 last_heartbeat;
+	u64 last_heartbeat_timestamp;
+	u32 heartbeat_sample_interval;
+	atomic_t firmware_flash_in_progress;
+	u32 __percpu *lockup_detected;
+	struct delayed_work monitor_ctlr_work;
+	struct delayed_work rescan_ctlr_work;
+	struct delayed_work event_monitor_work;
+	int remove_in_progress;
+	/* Address of h->q[x] is passed to intr handler to know which queue */
+	u8 q[MAX_REPLY_QUEUES];
+	char intrname[MAX_REPLY_QUEUES][16];	/* "hpsa0-msix00" names */
+	u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */
+#define HPSATMF_BITS_SUPPORTED  (1 << 0)
+#define HPSATMF_PHYS_LUN_RESET  (1 << 1)
+#define HPSATMF_PHYS_NEX_RESET  (1 << 2)
+#define HPSATMF_PHYS_TASK_ABORT (1 << 3)
+#define HPSATMF_PHYS_TSET_ABORT (1 << 4)
+#define HPSATMF_PHYS_CLEAR_ACA  (1 << 5)
+#define HPSATMF_PHYS_CLEAR_TSET (1 << 6)
+#define HPSATMF_PHYS_QRY_TASK   (1 << 7)
+#define HPSATMF_PHYS_QRY_TSET   (1 << 8)
+#define HPSATMF_PHYS_QRY_ASYNC  (1 << 9)
+#define HPSATMF_IOACCEL_ENABLED (1 << 15)
+#define HPSATMF_MASK_SUPPORTED  (1 << 16)
+#define HPSATMF_LOG_LUN_RESET   (1 << 17)
+#define HPSATMF_LOG_NEX_RESET   (1 << 18)
+#define HPSATMF_LOG_TASK_ABORT  (1 << 19)
+#define HPSATMF_LOG_TSET_ABORT  (1 << 20)
+#define HPSATMF_LOG_CLEAR_ACA   (1 << 21)
+#define HPSATMF_LOG_CLEAR_TSET  (1 << 22)
+#define HPSATMF_LOG_QRY_TASK    (1 << 23)
+#define HPSATMF_LOG_QRY_TSET    (1 << 24)
+#define HPSATMF_LOG_QRY_ASYNC   (1 << 25)
+	u32 events;
+#define CTLR_STATE_CHANGE_EVENT				(1 << 0)
+#define CTLR_ENCLOSURE_HOT_PLUG_EVENT			(1 << 1)
+#define CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV		(1 << 4)
+#define CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV		(1 << 5)
+#define CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL		(1 << 6)
+#define CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED	(1 << 30)
+#define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE	(1 << 31)
+
+#define RESCAN_REQUIRED_EVENT_BITS \
+		(CTLR_ENCLOSURE_HOT_PLUG_EVENT | \
+		CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \
+		CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \
+		CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \
+		CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE)
+	spinlock_t offline_device_lock;
+	struct list_head offline_device_list;
+	int	acciopath_status;
+	int	drv_req_rescan;
+	int	raid_offload_debug;
+	int     discovery_polling;
+	int     legacy_board;
+	struct  ReportLUNdata *lastlogicals;
+	int	needs_abort_tags_swizzled;
+	struct workqueue_struct *resubmit_wq;
+	struct workqueue_struct *rescan_ctlr_wq;
+	struct workqueue_struct *monitor_ctlr_wq;
+	atomic_t abort_cmds_available;
+	wait_queue_head_t event_sync_wait_queue;
+	struct mutex reset_mutex;
+	u8 reset_in_progress;
+	struct hpsa_sas_node *sas_host;
+	spinlock_t reset_lock;
+};
+
+struct offline_device_entry {
+	unsigned char scsi3addr[8];
+	struct list_head offline_list;
+};
+
+#define HPSA_ABORT_MSG 0
+#define HPSA_DEVICE_RESET_MSG 1
+#define HPSA_RESET_TYPE_CONTROLLER 0x00
+#define HPSA_RESET_TYPE_BUS 0x01
+#define HPSA_RESET_TYPE_LUN 0x04
+#define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */
+#define HPSA_MSG_SEND_RETRY_LIMIT 10
+#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
+
+/* Maximum time in seconds driver will wait for command completions
+ * when polling before giving up.
+ */
+#define HPSA_MAX_POLL_TIME_SECS (20)
+
+/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines
+ * how many times to retry TEST UNIT READY on a device
+ * while waiting for it to become ready before giving up.
+ * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval
+ * between sending TURs while waiting for a device
+ * to become ready.
+ */
+#define HPSA_TUR_RETRY_LIMIT (20)
+#define HPSA_MAX_WAIT_INTERVAL_SECS (30)
+
+/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board
+ * to become ready, in seconds, before giving up on it.
+ * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
+ * between polling the board to see if it is ready, in
+ * milliseconds.  HPSA_BOARD_READY_POLL_INTERVAL and
+ * HPSA_BOARD_READY_ITERATIONS are derived from those.
+ */
+#define HPSA_BOARD_READY_WAIT_SECS (120)
+#define HPSA_BOARD_NOT_READY_WAIT_SECS (100)
+#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
+#define HPSA_BOARD_READY_POLL_INTERVAL \
+	((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
+#define HPSA_BOARD_READY_ITERATIONS \
+	((HPSA_BOARD_READY_WAIT_SECS * 1000) / \
+		HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
+#define HPSA_BOARD_NOT_READY_ITERATIONS \
+	((HPSA_BOARD_NOT_READY_WAIT_SECS * 1000) / \
+		HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
+#define HPSA_POST_RESET_PAUSE_MSECS (3000)
+#define HPSA_POST_RESET_NOOP_RETRIES (12)
+
+/*  Defining the diffent access_menthods */
+/*
+ * Memory mapped FIFO interface (SMART 53xx cards)
+ */
+#define SA5_DOORBELL	0x20
+#define SA5_REQUEST_PORT_OFFSET	0x40
+#define SA5_REQUEST_PORT64_LO_OFFSET 0xC0
+#define SA5_REQUEST_PORT64_HI_OFFSET 0xC4
+#define SA5_REPLY_INTR_MASK_OFFSET	0x34
+#define SA5_REPLY_PORT_OFFSET		0x44
+#define SA5_INTR_STATUS		0x30
+#define SA5_SCRATCHPAD_OFFSET	0xB0
+
+#define SA5_CTCFG_OFFSET	0xB4
+#define SA5_CTMEM_OFFSET	0xB8
+
+#define SA5_INTR_OFF		0x08
+#define SA5B_INTR_OFF		0x04
+#define SA5_INTR_PENDING	0x08
+#define SA5B_INTR_PENDING	0x04
+#define FIFO_EMPTY		0xffffffff
+#define HPSA_FIRMWARE_READY	0xffff0000 /* value in scratchpad register */
+
+#define HPSA_ERROR_BIT		0x02
+
+/* Performant mode flags */
+#define SA5_PERF_INTR_PENDING   0x04
+#define SA5_PERF_INTR_OFF       0x05
+#define SA5_OUTDB_STATUS_PERF_BIT       0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT        0x01
+#define SA5_OUTDB_CLEAR         0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT        0x01
+#define SA5_OUTDB_STATUS        0x9C
+
+
+#define HPSA_INTR_ON 	1
+#define HPSA_INTR_OFF	0
+
+/*
+ * Inbound Post Queue offsets for IO Accelerator Mode 2
+ */
+#define IOACCEL2_INBOUND_POSTQ_32	0x48
+#define IOACCEL2_INBOUND_POSTQ_64_LOW	0xd0
+#define IOACCEL2_INBOUND_POSTQ_64_HI	0xd4
+
+#define HPSA_PHYSICAL_DEVICE_BUS	0
+#define HPSA_RAID_VOLUME_BUS		1
+#define HPSA_EXTERNAL_RAID_VOLUME_BUS	2
+#define HPSA_HBA_BUS			0
+#define HPSA_LEGACY_HBA_BUS		3
+
+/*
+	Send the command to the hardware
+*/
+static void SA5_submit_command(struct ctlr_info *h,
+	struct CommandList *c)
+{
+	writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+	(void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+}
+
+static void SA5_submit_command_no_read(struct ctlr_info *h,
+	struct CommandList *c)
+{
+	writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+}
+
+static void SA5_submit_command_ioaccel2(struct ctlr_info *h,
+	struct CommandList *c)
+{
+	writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+}
+
+/*
+ *  This card is the opposite of the other cards.
+ *   0 turns interrupts on...
+ *   0x08 turns them off...
+ */
+static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+	if (val) { /* Turn interrupts on */
+		h->interrupts_enabled = 1;
+		writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	} else { /* Turn them off */
+		h->interrupts_enabled = 0;
+		writel(SA5_INTR_OFF,
+			h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	}
+}
+
+/*
+ *  Variant of the above; 0x04 turns interrupts off...
+ */
+static void SA5B_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+	if (val) { /* Turn interrupts on */
+		h->interrupts_enabled = 1;
+		writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	} else { /* Turn them off */
+		h->interrupts_enabled = 0;
+		writel(SA5B_INTR_OFF,
+		       h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	}
+}
+
+static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+	if (val) { /* turn on interrupts */
+		h->interrupts_enabled = 1;
+		writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	} else {
+		h->interrupts_enabled = 0;
+		writel(SA5_PERF_INTR_OFF,
+			h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	}
+}
+
+static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
+{
+	struct reply_queue_buffer *rq = &h->reply_queue[q];
+	unsigned long register_value = FIFO_EMPTY;
+
+	/* msi auto clears the interrupt pending bit. */
+	if (unlikely(!(h->pdev->msi_enabled || h->msix_vectors))) {
+		/* flush the controller write of the reply queue by reading
+		 * outbound doorbell status register.
+		 */
+		(void) readl(h->vaddr + SA5_OUTDB_STATUS);
+		writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+		/* Do a read in order to flush the write to the controller
+		 * (as per spec.)
+		 */
+		(void) readl(h->vaddr + SA5_OUTDB_STATUS);
+	}
+
+	if ((((u32) rq->head[rq->current_entry]) & 1) == rq->wraparound) {
+		register_value = rq->head[rq->current_entry];
+		rq->current_entry++;
+		atomic_dec(&h->commands_outstanding);
+	} else {
+		register_value = FIFO_EMPTY;
+	}
+	/* Check for wraparound */
+	if (rq->current_entry == h->max_commands) {
+		rq->current_entry = 0;
+		rq->wraparound ^= 1;
+	}
+	return register_value;
+}
+
+/*
+ *   returns value read from hardware.
+ *     returns FIFO_EMPTY if there is nothing to read
+ */
+static unsigned long SA5_completed(struct ctlr_info *h,
+	__attribute__((unused)) u8 q)
+{
+	unsigned long register_value
+		= readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
+
+	if (register_value != FIFO_EMPTY)
+		atomic_dec(&h->commands_outstanding);
+
+#ifdef HPSA_DEBUG
+	if (register_value != FIFO_EMPTY)
+		dev_dbg(&h->pdev->dev, "Read %lx back from board\n",
+			register_value);
+	else
+		dev_dbg(&h->pdev->dev, "FIFO Empty read\n");
+#endif
+
+	return register_value;
+}
+/*
+ *	Returns true if an interrupt is pending..
+ */
+static bool SA5_intr_pending(struct ctlr_info *h)
+{
+	unsigned long register_value  =
+		readl(h->vaddr + SA5_INTR_STATUS);
+	return register_value & SA5_INTR_PENDING;
+}
+
+static bool SA5_performant_intr_pending(struct ctlr_info *h)
+{
+	unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+	if (!register_value)
+		return false;
+
+	/* Read outbound doorbell to flush */
+	register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+	return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
+
+#define SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT    0x100
+
+static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h)
+{
+	unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+	return (register_value & SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT) ?
+		true : false;
+}
+
+/*
+ *      Returns true if an interrupt is pending..
+ */
+static bool SA5B_intr_pending(struct ctlr_info *h)
+{
+	return readl(h->vaddr + SA5_INTR_STATUS) & SA5B_INTR_PENDING;
+}
+
+#define IOACCEL_MODE1_REPLY_QUEUE_INDEX  0x1A0
+#define IOACCEL_MODE1_PRODUCER_INDEX     0x1B8
+#define IOACCEL_MODE1_CONSUMER_INDEX     0x1BC
+#define IOACCEL_MODE1_REPLY_UNUSED       0xFFFFFFFFFFFFFFFFULL
+
+static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
+{
+	u64 register_value;
+	struct reply_queue_buffer *rq = &h->reply_queue[q];
+
+	BUG_ON(q >= h->nreply_queues);
+
+	register_value = rq->head[rq->current_entry];
+	if (register_value != IOACCEL_MODE1_REPLY_UNUSED) {
+		rq->head[rq->current_entry] = IOACCEL_MODE1_REPLY_UNUSED;
+		if (++rq->current_entry == rq->size)
+			rq->current_entry = 0;
+		/*
+		 * @todo
+		 *
+		 * Don't really need to write the new index after each command,
+		 * but with current driver design this is easiest.
+		 */
+		wmb();
+		writel((q << 24) | rq->current_entry, h->vaddr +
+				IOACCEL_MODE1_CONSUMER_INDEX);
+		atomic_dec(&h->commands_outstanding);
+	}
+	return (unsigned long) register_value;
+}
+
+static struct access_method SA5_access = {
+	.submit_command =	SA5_submit_command,
+	.set_intr_mask =	SA5_intr_mask,
+	.intr_pending =		SA5_intr_pending,
+	.command_completed =	SA5_completed,
+};
+
+/* Duplicate entry of the above to mark unsupported boards */
+static struct access_method SA5A_access = {
+	.submit_command =	SA5_submit_command,
+	.set_intr_mask =	SA5_intr_mask,
+	.intr_pending =		SA5_intr_pending,
+	.command_completed =	SA5_completed,
+};
+
+static struct access_method SA5B_access = {
+	.submit_command =	SA5_submit_command,
+	.set_intr_mask =	SA5B_intr_mask,
+	.intr_pending =		SA5B_intr_pending,
+	.command_completed =	SA5_completed,
+};
+
+static struct access_method SA5_ioaccel_mode1_access = {
+	.submit_command =	SA5_submit_command,
+	.set_intr_mask =	SA5_performant_intr_mask,
+	.intr_pending =		SA5_ioaccel_mode1_intr_pending,
+	.command_completed =	SA5_ioaccel_mode1_completed,
+};
+
+static struct access_method SA5_ioaccel_mode2_access = {
+	.submit_command =	SA5_submit_command_ioaccel2,
+	.set_intr_mask =	SA5_performant_intr_mask,
+	.intr_pending =		SA5_performant_intr_pending,
+	.command_completed =	SA5_performant_completed,
+};
+
+static struct access_method SA5_performant_access = {
+	.submit_command =	SA5_submit_command,
+	.set_intr_mask =	SA5_performant_intr_mask,
+	.intr_pending =		SA5_performant_intr_pending,
+	.command_completed =	SA5_performant_completed,
+};
+
+static struct access_method SA5_performant_access_no_read = {
+	.submit_command =	SA5_submit_command_no_read,
+	.set_intr_mask =	SA5_performant_intr_mask,
+	.intr_pending =		SA5_performant_intr_pending,
+	.command_completed =	SA5_performant_completed,
+};
+
+struct board_type {
+	u32	board_id;
+	char	*product_name;
+	struct access_method *access;
+};
+
+#endif /* HPSA_H */
+