diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-08-07 13:11:40 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-08-07 13:11:40 +0000 |
commit | 8b0a8165cdad0f4133837d753649ef4682e42c3b (patch) | |
tree | 5c58f869f31ddb1f7bd6e8bdea269b680b36c5b6 /drivers/spi | |
parent | Releasing progress-linux version 6.8.12-1~progress7.99u1. (diff) | |
download | linux-8b0a8165cdad0f4133837d753649ef4682e42c3b.tar.xz linux-8b0a8165cdad0f4133837d753649ef4682e42c3b.zip |
Merging upstream version 6.9.7.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/spi')
39 files changed, 1210 insertions, 556 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ddae0fde79..bc7021da2f 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -694,7 +694,7 @@ config SPI_MTK_SNFI This enables support for SPI-NAND mode on the MediaTek NAND Flash Interface found on MediaTek ARM SoCs. This controller is implemented as a SPI-MEM controller with pipelined ECC - capcability. + capability. config SPI_WPCM_FIU tristate "Nuvoton WPCM450 Flash Interface Unit" diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index b7ada98146..d78762d4db 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -189,7 +189,7 @@ static int ath79_spi_probe(struct platform_device *pdev) host->num_chipselect = 3; host->mem_ops = &ath79_mem_ops; - sp->bitbang.master = host; + sp->bitbang.ctlr = host; sp->bitbang.chipselect = ath79_spi_chipselect; sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; sp->bitbang.flags = SPI_CS_HIGH; @@ -237,7 +237,7 @@ static void ath79_spi_remove(struct platform_device *pdev) spi_bitbang_stop(&sp->bitbang); ath79_spi_disable(sp); - spi_controller_put(sp->bitbang.master); + spi_controller_put(sp->bitbang.ctlr); } static void ath79_spi_shutdown(struct platform_device *pdev) diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c index 1011b1a8f2..825d2f1cdf 100644 --- a/drivers/spi/spi-au1550.c +++ b/drivers/spi/spi-au1550.c @@ -800,7 +800,7 @@ static int au1550_spi_probe(struct platform_device *pdev) init_completion(&hw->host_done); - hw->bitbang.master = hw->host; + hw->bitbang.ctlr = hw->host; hw->bitbang.setup_transfer = au1550_spi_setupxfer; hw->bitbang.chipselect = au1550_spi_chipsel; hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c index 2b07b6dbf8..e358ac5b45 100644 --- a/drivers/spi/spi-axi-spi-engine.c +++ b/drivers/spi/spi-axi-spi-engine.c @@ -6,15 +6,15 @@ */ #include <linux/clk.h> +#include <linux/completion.h> #include <linux/fpga/adi-axi-common.h> -#include <linux/idr.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/of.h> #include <linux/module.h> +#include <linux/overflow.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <linux/timer.h> #define SPI_ENGINE_REG_RESET 0x40 @@ -57,6 +57,9 @@ #define SPI_ENGINE_TRANSFER_WRITE 0x1 #define SPI_ENGINE_TRANSFER_READ 0x2 +/* Arbitrary sync ID for use by host->cur_msg */ +#define AXI_SPI_ENGINE_CUR_MSG_SYNC_ID 0x1 + #define SPI_ENGINE_CMD(inst, arg1, arg2) \ (((inst) << 12) | ((arg1) << 8) | (arg2)) @@ -73,15 +76,13 @@ struct spi_engine_program { unsigned int length; - uint16_t instructions[]; + uint16_t instructions[] __counted_by(length); }; /** * struct spi_engine_message_state - SPI engine per-message state */ struct spi_engine_message_state { - /** @p: Instructions for executing this message. */ - struct spi_engine_program *p; /** @cmd_length: Number of elements in cmd_buf array. */ unsigned cmd_length; /** @cmd_buf: Array of commands not yet written to CMD FIFO. */ @@ -98,8 +99,6 @@ struct spi_engine_message_state { unsigned int rx_length; /** @rx_buf: Bytes not yet written to the RX FIFO. */ uint8_t *rx_buf; - /** @sync_id: ID to correlate SYNC interrupts with this message. */ - u8 sync_id; }; struct spi_engine { @@ -109,19 +108,18 @@ struct spi_engine { spinlock_t lock; void __iomem *base; - struct ida sync_ida; - struct timer_list watchdog_timer; - struct spi_controller *controller; - + struct spi_engine_message_state msg_state; + struct completion msg_complete; unsigned int int_enable; }; static void spi_engine_program_add_cmd(struct spi_engine_program *p, bool dry, uint16_t cmd) { - if (!dry) - p->instructions[p->length] = cmd; p->length++; + + if (!dry) + p->instructions[p->length - 1] = cmd; } static unsigned int spi_engine_get_config(struct spi_device *spi) @@ -483,14 +481,10 @@ static irqreturn_t spi_engine_irq(int irq, void *devid) } if (pending & SPI_ENGINE_INT_SYNC && msg) { - struct spi_engine_message_state *st = msg->state; - - if (completed_id == st->sync_id) { - if (timer_delete_sync(&spi_engine->watchdog_timer)) { - msg->status = 0; - msg->actual_length = msg->frame_length; - spi_finalize_current_message(host); - } + if (completed_id == AXI_SPI_ENGINE_CUR_MSG_SYNC_ID) { + msg->status = 0; + msg->actual_length = msg->frame_length; + complete(&spi_engine->msg_complete); disable_int |= SPI_ENGINE_INT_SYNC; } } @@ -506,61 +500,32 @@ static irqreturn_t spi_engine_irq(int irq, void *devid) return IRQ_HANDLED; } -static int spi_engine_prepare_message(struct spi_controller *host, - struct spi_message *msg) +static int spi_engine_optimize_message(struct spi_message *msg) { struct spi_engine_program p_dry, *p; - struct spi_engine *spi_engine = spi_controller_get_devdata(host); - struct spi_engine_message_state *st; - size_t size; - int ret; - - st = kzalloc(sizeof(*st), GFP_KERNEL); - if (!st) - return -ENOMEM; spi_engine_precompile_message(msg); p_dry.length = 0; spi_engine_compile_message(msg, true, &p_dry); - size = sizeof(*p->instructions) * (p_dry.length + 1); - p = kzalloc(sizeof(*p) + size, GFP_KERNEL); - if (!p) { - kfree(st); + p = kzalloc(struct_size(p, instructions, p_dry.length + 1), GFP_KERNEL); + if (!p) return -ENOMEM; - } - - ret = ida_alloc_range(&spi_engine->sync_ida, 0, U8_MAX, GFP_KERNEL); - if (ret < 0) { - kfree(p); - kfree(st); - return ret; - } - - st->sync_id = ret; spi_engine_compile_message(msg, false, p); - spi_engine_program_add_cmd(p, false, SPI_ENGINE_CMD_SYNC(st->sync_id)); + spi_engine_program_add_cmd(p, false, SPI_ENGINE_CMD_SYNC( + AXI_SPI_ENGINE_CUR_MSG_SYNC_ID)); - st->p = p; - st->cmd_buf = p->instructions; - st->cmd_length = p->length; - msg->state = st; + msg->opt_state = p; return 0; } -static int spi_engine_unprepare_message(struct spi_controller *host, - struct spi_message *msg) +static int spi_engine_unoptimize_message(struct spi_message *msg) { - struct spi_engine *spi_engine = spi_controller_get_devdata(host); - struct spi_engine_message_state *st = msg->state; - - ida_free(&spi_engine->sync_ida, st->sync_id); - kfree(st->p); - kfree(st); + kfree(msg->opt_state); return 0; } @@ -569,11 +534,18 @@ static int spi_engine_transfer_one_message(struct spi_controller *host, struct spi_message *msg) { struct spi_engine *spi_engine = spi_controller_get_devdata(host); - struct spi_engine_message_state *st = msg->state; + struct spi_engine_message_state *st = &spi_engine->msg_state; + struct spi_engine_program *p = msg->opt_state; unsigned int int_enable = 0; unsigned long flags; - mod_timer(&spi_engine->watchdog_timer, jiffies + msecs_to_jiffies(5000)); + /* reinitialize message state for this transfer */ + memset(st, 0, sizeof(*st)); + st->cmd_buf = p->instructions; + st->cmd_length = p->length; + msg->state = st; + + reinit_completion(&spi_engine->msg_complete); spin_lock_irqsave(&spi_engine->lock, flags); @@ -595,21 +567,16 @@ static int spi_engine_transfer_one_message(struct spi_controller *host, spi_engine->int_enable = int_enable; spin_unlock_irqrestore(&spi_engine->lock, flags); - return 0; -} - -static void spi_engine_timeout(struct timer_list *timer) -{ - struct spi_engine *spi_engine = from_timer(spi_engine, timer, watchdog_timer); - struct spi_controller *host = spi_engine->controller; - - if (WARN_ON(!host->cur_msg)) - return; + if (!wait_for_completion_timeout(&spi_engine->msg_complete, + msecs_to_jiffies(5000))) { + dev_err(&host->dev, + "Timeout occurred while waiting for transfer to complete. Hardware is probably broken.\n"); + msg->status = -ETIMEDOUT; + } - dev_err(&host->dev, - "Timeout occurred while waiting for transfer to complete. Hardware is probably broken.\n"); - host->cur_msg->status = -ETIMEDOUT; spi_finalize_current_message(host); + + return msg->status; } static void spi_engine_release_hw(void *p) @@ -640,9 +607,7 @@ static int spi_engine_probe(struct platform_device *pdev) spi_engine = spi_controller_get_devdata(host); spin_lock_init(&spi_engine->lock); - ida_init(&spi_engine->sync_ida); - timer_setup(&spi_engine->watchdog_timer, spi_engine_timeout, TIMER_IRQSAFE); - spi_engine->controller = host; + init_completion(&spi_engine->msg_complete); spi_engine->clk = devm_clk_get_enabled(&pdev->dev, "s_axi_aclk"); if (IS_ERR(spi_engine->clk)) @@ -684,8 +649,8 @@ static int spi_engine_probe(struct platform_device *pdev) host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); host->max_speed_hz = clk_get_rate(spi_engine->ref_clk) / 2; host->transfer_one_message = spi_engine_transfer_one_message; - host->prepare_message = spi_engine_prepare_message; - host->unprepare_message = spi_engine_unprepare_message; + host->optimize_message = spi_engine_optimize_message; + host->unoptimize_message = spi_engine_unoptimize_message; host->num_chipselect = 8; if (host->max_speed_hz == 0) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index e709887eb2..e1b9b12357 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -1117,19 +1117,6 @@ static int bcm2835_spi_prepare_message(struct spi_controller *ctlr, struct spi_device *spi = msg->spi; struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); struct bcm2835_spidev *target = spi_get_ctldata(spi); - int ret; - - if (ctlr->can_dma) { - /* - * DMA transfers are limited to 16 bit (0 to 65535 bytes) by - * the SPI HW due to DLEN. Split up transfers (32-bit FIFO - * aligned) if the limit is exceeded. - */ - ret = spi_split_transfers_maxsize(ctlr, msg, 65532, - GFP_KERNEL | GFP_DMA); - if (ret) - return ret; - } /* * Set up clock polarity before spi_transfer_one_message() asserts @@ -1219,6 +1206,19 @@ static int bcm2835_spi_setup_dma(struct spi_controller *ctlr, return 0; } +static size_t bcm2835_spi_max_transfer_size(struct spi_device *spi) +{ + /* + * DMA transfers are limited to 16 bit (0 to 65535 bytes) by + * the SPI HW due to DLEN. Split up transfers (32-bit FIFO + * aligned) if the limit is exceeded. + */ + if (spi->controller->can_dma) + return 65532; + + return SIZE_MAX; +} + static int bcm2835_spi_setup(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; @@ -1348,6 +1348,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) ctlr->mode_bits = BCM2835_SPI_MODE_BITS; ctlr->bits_per_word_mask = SPI_BPW_MASK(8); ctlr->num_chipselect = 3; + ctlr->max_transfer_size = bcm2835_spi_max_transfer_size; ctlr->setup = bcm2835_spi_setup; ctlr->cleanup = bcm2835_spi_cleanup; ctlr->transfer_one = bcm2835_spi_transfer_one; diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index ecd44016c1..a0e2204fc0 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -187,7 +187,7 @@ int spi_bitbang_setup(struct spi_device *spi) bool initial_setup = false; int retval; - bitbang = spi_master_get_devdata(spi->master); + bitbang = spi_controller_get_devdata(spi->controller); if (!cs) { cs = kzalloc(sizeof(*cs), GFP_KERNEL); @@ -236,7 +236,7 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) unsigned nsecs = cs->nsecs; struct spi_bitbang *bitbang; - bitbang = spi_master_get_devdata(spi->master); + bitbang = spi_controller_get_devdata(spi->controller); if (bitbang->set_line_direction) { int err; @@ -268,11 +268,11 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) * transfer-at-a-time ones to leverage dma or fifo hardware. */ -static int spi_bitbang_prepare_hardware(struct spi_master *spi) +static int spi_bitbang_prepare_hardware(struct spi_controller *spi) { struct spi_bitbang *bitbang; - bitbang = spi_master_get_devdata(spi); + bitbang = spi_controller_get_devdata(spi); mutex_lock(&bitbang->lock); bitbang->busy = 1; @@ -281,11 +281,11 @@ static int spi_bitbang_prepare_hardware(struct spi_master *spi) return 0; } -static int spi_bitbang_transfer_one(struct spi_master *master, +static int spi_bitbang_transfer_one(struct spi_controller *ctlr, struct spi_device *spi, struct spi_transfer *transfer) { - struct spi_bitbang *bitbang = spi_master_get_devdata(master); + struct spi_bitbang *bitbang = spi_controller_get_devdata(ctlr); int status = 0; if (bitbang->setup_transfer) { @@ -303,16 +303,16 @@ static int spi_bitbang_transfer_one(struct spi_master *master, status = -EREMOTEIO; out: - spi_finalize_current_transfer(master); + spi_finalize_current_transfer(ctlr); return status; } -static int spi_bitbang_unprepare_hardware(struct spi_master *spi) +static int spi_bitbang_unprepare_hardware(struct spi_controller *spi) { struct spi_bitbang *bitbang; - bitbang = spi_master_get_devdata(spi); + bitbang = spi_controller_get_devdata(spi); mutex_lock(&bitbang->lock); bitbang->busy = 0; @@ -323,7 +323,7 @@ static int spi_bitbang_unprepare_hardware(struct spi_master *spi) static void spi_bitbang_set_cs(struct spi_device *spi, bool enable) { - struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master); + struct spi_bitbang *bitbang = spi_controller_get_devdata(spi->controller); /* SPI core provides CS high / low, but bitbang driver * expects CS active @@ -341,10 +341,10 @@ static void spi_bitbang_set_cs(struct spi_device *spi, bool enable) int spi_bitbang_init(struct spi_bitbang *bitbang) { - struct spi_master *master = bitbang->master; + struct spi_controller *ctlr = bitbang->ctlr; bool custom_cs; - if (!master) + if (!ctlr) return -EINVAL; /* * We only need the chipselect callback if we are actually using it. @@ -352,39 +352,39 @@ int spi_bitbang_init(struct spi_bitbang *bitbang) * SPI_CONTROLLER_GPIO_SS flag is set, we always need to call the * driver-specific chipselect routine. */ - custom_cs = (!master->use_gpio_descriptors || - (master->flags & SPI_CONTROLLER_GPIO_SS)); + custom_cs = (!ctlr->use_gpio_descriptors || + (ctlr->flags & SPI_CONTROLLER_GPIO_SS)); if (custom_cs && !bitbang->chipselect) return -EINVAL; mutex_init(&bitbang->lock); - if (!master->mode_bits) - master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; + if (!ctlr->mode_bits) + ctlr->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; - if (master->transfer || master->transfer_one_message) + if (ctlr->transfer || ctlr->transfer_one_message) return -EINVAL; - master->prepare_transfer_hardware = spi_bitbang_prepare_hardware; - master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; - master->transfer_one = spi_bitbang_transfer_one; + ctlr->prepare_transfer_hardware = spi_bitbang_prepare_hardware; + ctlr->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; + ctlr->transfer_one = spi_bitbang_transfer_one; /* * When using GPIO descriptors, the ->set_cs() callback doesn't even * get called unless SPI_CONTROLLER_GPIO_SS is set. */ if (custom_cs) - master->set_cs = spi_bitbang_set_cs; + ctlr->set_cs = spi_bitbang_set_cs; if (!bitbang->txrx_bufs) { bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; - if (!master->setup) { + if (!ctlr->setup) { if (!bitbang->setup_transfer) bitbang->setup_transfer = spi_bitbang_setup_transfer; - master->setup = spi_bitbang_setup; - master->cleanup = spi_bitbang_cleanup; + ctlr->setup = spi_bitbang_setup; + ctlr->cleanup = spi_bitbang_cleanup; } } @@ -411,18 +411,18 @@ EXPORT_SYMBOL_GPL(spi_bitbang_init); * master methods. Those methods are the defaults if the bitbang->txrx_bufs * routine isn't initialized. * - * This routine registers the spi_master, which will process requests in a + * This routine registers the spi_controller, which will process requests in a * dedicated task, keeping IRQs unblocked most of the time. To stop * processing those requests, call spi_bitbang_stop(). * - * On success, this routine will take a reference to master. The caller is - * responsible for calling spi_bitbang_stop() to decrement the reference and - * spi_master_put() as counterpart of spi_alloc_master() to prevent a memory + * On success, this routine will take a reference to the controller. The caller + * is responsible for calling spi_bitbang_stop() to decrement the reference and + * spi_controller_put() as counterpart of spi_alloc_master() to prevent a memory * leak. */ int spi_bitbang_start(struct spi_bitbang *bitbang) { - struct spi_master *master = bitbang->master; + struct spi_controller *ctlr = bitbang->ctlr; int ret; ret = spi_bitbang_init(bitbang); @@ -432,9 +432,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) /* driver may get busy before register() returns, especially * if someone registered boardinfo for devices */ - ret = spi_register_master(spi_master_get(master)); + ret = spi_register_controller(spi_controller_get(ctlr)); if (ret) - spi_master_put(master); + spi_controller_put(ctlr); return ret; } @@ -445,7 +445,7 @@ EXPORT_SYMBOL_GPL(spi_bitbang_start); */ void spi_bitbang_stop(struct spi_bitbang *bitbang) { - spi_unregister_master(bitbang->master); + spi_unregister_controller(bitbang->ctlr); } EXPORT_SYMBOL_GPL(spi_bitbang_stop); diff --git a/drivers/spi/spi-butterfly.c b/drivers/spi/spi-butterfly.c index 289b445424..1d267e6c22 100644 --- a/drivers/spi/spi-butterfly.c +++ b/drivers/spi/spi-butterfly.c @@ -205,7 +205,7 @@ static void butterfly_attach(struct parport *p) host->bus_num = 42; host->num_chipselect = 2; - pp->bitbang.master = host; + pp->bitbang.ctlr = host; pp->bitbang.chipselect = butterfly_chipselect; pp->bitbang.txrx_word[SPI_MODE_0] = butterfly_txrx_word_mode0; @@ -263,7 +263,7 @@ static void butterfly_attach(struct parport *p) pp->info[0].platform_data = &flash; pp->info[0].chip_select = 1; pp->info[0].controller_data = pp; - pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]); + pp->dataflash = spi_new_device(pp->bitbang.ctlr, &pp->info[0]); if (pp->dataflash) pr_debug("%s: dataflash at %s\n", p->name, dev_name(&pp->dataflash->dev)); @@ -308,7 +308,7 @@ static void butterfly_detach(struct parport *p) parport_release(pp->pd); parport_unregister_device(pp->pd); - spi_controller_put(pp->bitbang.master); + spi_controller_put(pp->bitbang.ctlr); } static struct parport_driver butterfly_driver = { diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 1a8d03958d..350b3dab3a 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -31,7 +31,9 @@ #include <linux/timer.h> #define CQSPI_NAME "cadence-qspi" -#define CQSPI_MAX_CHIPSELECT 16 +#define CQSPI_MAX_CHIPSELECT 4 + +static_assert(CQSPI_MAX_CHIPSELECT <= SPI_CS_CNT_MAX); /* Quirks */ #define CQSPI_NEEDS_WR_DELAY BIT(0) @@ -1410,7 +1412,7 @@ static int cqspi_mem_process(struct spi_mem *mem, const struct spi_mem_op *op) static int cqspi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) { int ret; - struct cqspi_st *cqspi = spi_master_get_devdata(mem->spi->master); + struct cqspi_st *cqspi = spi_controller_get_devdata(mem->spi->controller); struct device *dev = &cqspi->pdev->dev; ret = pm_runtime_resume_and_get(dev); @@ -1619,6 +1621,7 @@ static const struct spi_controller_mem_caps cqspi_mem_caps = { static int cqspi_setup_flash(struct cqspi_st *cqspi) { + unsigned int max_cs = cqspi->num_chipselect - 1; struct platform_device *pdev = cqspi->pdev; struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; @@ -1635,10 +1638,12 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi) return ret; } - if (cs >= CQSPI_MAX_CHIPSELECT) { + if (cs >= cqspi->num_chipselect) { dev_err(dev, "Chip select %d out of range.\n", cs); of_node_put(np); return -EINVAL; + } else if (cs < max_cs) { + max_cs = cs; } f_pdata = &cqspi->f_pdata[cs]; @@ -1652,6 +1657,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi) } } + cqspi->num_chipselect = max_cs + 1; return 0; } @@ -1712,10 +1718,9 @@ static int cqspi_probe(struct platform_device *pdev) int irq; host = devm_spi_alloc_host(&pdev->dev, sizeof(*cqspi)); - if (!host) { - dev_err(&pdev->dev, "devm_spi_alloc_host failed\n"); + if (!host) return -ENOMEM; - } + host->mode_bits = SPI_RX_QUAD | SPI_RX_DUAL; host->mem_ops = &cqspi_mem_ops; host->mem_caps = &cqspi_mem_caps; @@ -1863,14 +1868,14 @@ static int cqspi_probe(struct platform_device *pdev) cqspi->current_cs = -1; cqspi->sclk = 0; - host->num_chipselect = cqspi->num_chipselect; - ret = cqspi_setup_flash(cqspi); if (ret) { dev_err(dev, "failed to setup flash parameters %d\n", ret); goto probe_setup_failed; } + host->num_chipselect = cqspi->num_chipselect; + if (cqspi->use_direct_mode) { ret = cqspi_request_mmap_dma(cqspi); if (ret == -EPROBE_DEFER) diff --git a/drivers/spi/spi-cavium.c b/drivers/spi/spi-cavium.c index dfe224defd..26b8cd1c76 100644 --- a/drivers/spi/spi-cavium.c +++ b/drivers/spi/spi-cavium.c @@ -124,10 +124,10 @@ static int octeon_spi_do_transfer(struct octeon_spi *p, return xfer->len; } -int octeon_spi_transfer_one_message(struct spi_master *master, +int octeon_spi_transfer_one_message(struct spi_controller *ctlr, struct spi_message *msg) { - struct octeon_spi *p = spi_master_get_devdata(master); + struct octeon_spi *p = spi_controller_get_devdata(ctlr); unsigned int total_len = 0; int status = 0; struct spi_transfer *xfer; @@ -145,6 +145,6 @@ int octeon_spi_transfer_one_message(struct spi_master *master, err: msg->status = status; msg->actual_length = total_len; - spi_finalize_current_message(master); + spi_finalize_current_message(ctlr); return status; } diff --git a/drivers/spi/spi-cavium.h b/drivers/spi/spi-cavium.h index 1f3ac463a2..af53a0c314 100644 --- a/drivers/spi/spi-cavium.h +++ b/drivers/spi/spi-cavium.h @@ -28,7 +28,7 @@ struct octeon_spi { #define OCTEON_SPI_TX(x) (x->regs.tx) #define OCTEON_SPI_DAT0(x) (x->regs.data) -int octeon_spi_transfer_one_message(struct spi_master *master, +int octeon_spi_transfer_one_message(struct spi_controller *ctlr, struct spi_message *msg); /* MPI register descriptions */ diff --git a/drivers/spi/spi-cs42l43.c b/drivers/spi/spi-cs42l43.c index adf19e8c4c..0d9c948e11 100644 --- a/drivers/spi/spi-cs42l43.c +++ b/drivers/spi/spi-cs42l43.c @@ -11,7 +11,9 @@ #include <linux/errno.h> #include <linux/mfd/cs42l43.h> #include <linux/mfd/cs42l43-regs.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> @@ -19,7 +21,7 @@ #include <linux/units.h> #define CS42L43_FIFO_SIZE 16 -#define CS42L43_SPI_ROOT_HZ (40 * HZ_PER_MHZ) +#define CS42L43_SPI_ROOT_HZ 49152000 #define CS42L43_SPI_MAX_LENGTH 65532 enum cs42l43_spi_cmd { @@ -201,6 +203,11 @@ static size_t cs42l43_spi_max_length(struct spi_device *spi) return CS42L43_SPI_MAX_LENGTH; } +static void cs42l43_release_of_node(void *data) +{ + fwnode_handle_put(data); +} + static int cs42l43_spi_probe(struct platform_device *pdev) { struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent); @@ -227,12 +234,6 @@ static int cs42l43_spi_probe(struct platform_device *pdev) priv->ctlr->transfer_one = cs42l43_transfer_one; priv->ctlr->set_cs = cs42l43_set_cs; priv->ctlr->max_transfer_size = cs42l43_spi_max_length; - - if (is_of_node(fwnode)) - fwnode = fwnode_get_named_child_node(fwnode, "spi"); - - device_set_node(&priv->ctlr->dev, fwnode); - priv->ctlr->mode_bits = SPI_3WIRE | SPI_MODE_X_MASK; priv->ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX; priv->ctlr->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16) | @@ -256,6 +257,17 @@ static int cs42l43_spi_probe(struct platform_device *pdev) regmap_write(priv->regmap, CS42L43_SPI_CONFIG3, 0); regmap_write(priv->regmap, CS42L43_SPI_CONFIG4, CS42L43_SPI_STALL_ENA_MASK); + if (is_of_node(fwnode)) { + fwnode = fwnode_get_named_child_node(fwnode, "spi"); + ret = devm_add_action(priv->dev, cs42l43_release_of_node, fwnode); + if (ret) { + fwnode_handle_put(fwnode); + return ret; + } + } + + device_set_node(&priv->ctlr->dev, fwnode); + ret = devm_spi_register_controller(priv->dev, priv->ctlr); if (ret) { dev_err(priv->dev, "Failed to register SPI controller: %d\n", ret); diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 5688be245c..be3998104b 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -459,7 +459,7 @@ static bool davinci_spi_can_dma(struct spi_controller *host, static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) { - struct device *sdev = dspi->bitbang.master->dev.parent; + struct device *sdev = dspi->bitbang.ctlr->dev.parent; if (int_status & SPIFLG_TIMEOUT_MASK) { dev_err(sdev, "SPI Time-out Error\n"); @@ -742,7 +742,7 @@ static irqreturn_t davinci_spi_irq(s32 irq, void *data) static int davinci_spi_request_dma(struct davinci_spi *dspi) { - struct device *sdev = dspi->bitbang.master->dev.parent; + struct device *sdev = dspi->bitbang.ctlr->dev.parent; dspi->dma_rx = dma_request_chan(sdev, "rx"); if (IS_ERR(dspi->dma_rx)) @@ -913,7 +913,7 @@ static int davinci_spi_probe(struct platform_device *pdev) if (ret) goto free_host; - dspi->bitbang.master = host; + dspi->bitbang.ctlr = host; dspi->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(dspi->clk)) { diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c index 0ecbb6c36e..f4c209e5f5 100644 --- a/drivers/spi/spi-dw-dma.c +++ b/drivers/spi/spi-dw-dma.c @@ -577,7 +577,7 @@ static int dw_spi_dma_transfer_one(struct dw_spi *dws, sg_init_table(&tx_tmp, 1); sg_init_table(&rx_tmp, 1); - for (base = 0, len = 0; base < xfer->len; base += len) { + for (base = 0; base < xfer->len; base += len) { /* Fetch next Tx DMA data chunk */ if (!tx_len) { tx_sg = !tx_sg ? &xfer->tx_sg.sgl[0] : sg_next(tx_sg); diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index c9eae046f6..38defdcf93 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -502,15 +502,12 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) return -ENOMEM; dma->chan_rx = dma_request_chan(dev, "rx"); - if (IS_ERR(dma->chan_rx)) { - return dev_err_probe(dev, PTR_ERR(dma->chan_rx), - "rx dma channel not available\n"); - } + if (IS_ERR(dma->chan_rx)) + return dev_err_probe(dev, PTR_ERR(dma->chan_rx), "rx dma channel not available\n"); dma->chan_tx = dma_request_chan(dev, "tx"); if (IS_ERR(dma->chan_tx)) { - ret = PTR_ERR(dma->chan_tx); - dev_err_probe(dev, ret, "tx dma channel not available\n"); + ret = dev_err_probe(dev, PTR_ERR(dma->chan_tx), "tx dma channel not available\n"); goto err_tx_channel; } @@ -541,16 +538,14 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) cfg.direction = DMA_DEV_TO_MEM; ret = dmaengine_slave_config(dma->chan_rx, &cfg); if (ret) { - dev_err(dev, "can't configure rx dma channel\n"); - ret = -EINVAL; + dev_err_probe(dev, ret, "can't configure rx dma channel\n"); goto err_slave_config; } cfg.direction = DMA_MEM_TO_DEV; ret = dmaengine_slave_config(dma->chan_tx, &cfg); if (ret) { - dev_err(dev, "can't configure tx dma channel\n"); - ret = -EINVAL; + dev_err_probe(dev, ret, "can't configure tx dma channel\n"); goto err_slave_config; } diff --git a/drivers/spi/spi-fsl-lib.c b/drivers/spi/spi-fsl-lib.c index 885757c29f..4fc2c56555 100644 --- a/drivers/spi/spi-fsl-lib.c +++ b/drivers/spi/spi-fsl-lib.c @@ -82,18 +82,18 @@ void mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) { struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); - struct spi_master *master; + struct spi_controller *ctlr; struct mpc8xxx_spi *mpc8xxx_spi; - master = dev_get_drvdata(dev); + ctlr = dev_get_drvdata(dev); /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH + ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST | SPI_LOOP; - master->dev.of_node = dev->of_node; + ctlr->dev.of_node = dev->of_node; - mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi = spi_controller_get_devdata(ctlr); mpc8xxx_spi->dev = dev; mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; @@ -104,8 +104,8 @@ void mpc8xxx_spi_probe(struct device *dev, struct resource *mem, mpc8xxx_spi->rx_shift = 0; mpc8xxx_spi->tx_shift = 0; - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->max_chipselect; + ctlr->bus_num = pdata->bus_num; + ctlr->num_chipselect = pdata->max_chipselect; init_completion(&mpc8xxx_spi->done); } diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index 079035db7d..92a662d1b5 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -852,39 +852,39 @@ static int fsl_lpspi_probe(struct platform_device *pdev) fsl_lpspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(fsl_lpspi->base)) { ret = PTR_ERR(fsl_lpspi->base); - goto out_controller_put; + return ret; } fsl_lpspi->base_phys = res->start; irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = irq; - goto out_controller_put; + return ret; } ret = devm_request_irq(&pdev->dev, irq, fsl_lpspi_isr, 0, dev_name(&pdev->dev), fsl_lpspi); if (ret) { dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret); - goto out_controller_put; + return ret; } fsl_lpspi->clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(fsl_lpspi->clk_per)) { ret = PTR_ERR(fsl_lpspi->clk_per); - goto out_controller_put; + return ret; } fsl_lpspi->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(fsl_lpspi->clk_ipg)) { ret = PTR_ERR(fsl_lpspi->clk_ipg); - goto out_controller_put; + return ret; } /* enable the clock */ ret = fsl_lpspi_init_rpm(fsl_lpspi); if (ret) - goto out_controller_put; + return ret; ret = pm_runtime_get_sync(fsl_lpspi->dev); if (ret < 0) { @@ -945,8 +945,6 @@ out_pm_get: pm_runtime_dont_use_autosuspend(fsl_lpspi->dev); pm_runtime_put_sync(fsl_lpspi->dev); pm_runtime_disable(fsl_lpspi->dev); -out_controller_put: - spi_controller_put(controller); return ret; } diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index 15f84e68d4..37ef8c40b2 100644 --- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -647,7 +647,7 @@ static void spi_geni_release_dma_chan(struct spi_geni_master *mas) static int spi_geni_init(struct spi_geni_master *mas) { - struct spi_master *spi = dev_get_drvdata(mas->dev); + struct spi_controller *spi = dev_get_drvdata(mas->dev); struct geni_se *se = &mas->se; unsigned int proto, major, minor, ver; u32 spi_tx_cfg, fifo_disable; diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index d8db4564b4..909cce109b 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -427,7 +427,7 @@ static int spi_gpio_probe(struct platform_device *pdev) host->cleanup = spi_gpio_cleanup; bb = &spi_gpio->bitbang; - bb->master = host; + bb->ctlr = host; /* * There is some additional business, apart from driving the CS GPIO * line, that we need to do on selection. This makes the local diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index c3e5cee18b..09b6c1b45f 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -660,18 +660,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, ctrl |= (spi_imx->target_burst * 8 - 1) << MX51_ECSPI_CTRL_BL_OFFSET; else { - if (spi_imx->usedma) { - ctrl |= (spi_imx->bits_per_word - 1) - << MX51_ECSPI_CTRL_BL_OFFSET; - } else { - if (spi_imx->count >= MX51_ECSPI_CTRL_MAX_BURST) - ctrl |= (MX51_ECSPI_CTRL_MAX_BURST * BITS_PER_BYTE - 1) - << MX51_ECSPI_CTRL_BL_OFFSET; - else - ctrl |= (spi_imx->count / DIV_ROUND_UP(spi_imx->bits_per_word, - BITS_PER_BYTE) * spi_imx->bits_per_word - 1) - << MX51_ECSPI_CTRL_BL_OFFSET; - } + ctrl |= (spi_imx->bits_per_word - 1) + << MX51_ECSPI_CTRL_BL_OFFSET; } /* set clock speed */ diff --git a/drivers/spi/spi-intel.c b/drivers/spi/spi-intel.c index 3654ae35d2..3e5dcf2b3c 100644 --- a/drivers/spi/spi-intel.c +++ b/drivers/spi/spi-intel.c @@ -1254,6 +1254,13 @@ static void intel_spi_fill_partition(struct intel_spi *ispi, if (end > part->size) part->size = end; } + + /* + * Regions can refer to the second chip too so in this case we + * just make the BIOS partition to occupy the whole chip. + */ + if (ispi->chip0_size && part->size > ispi->chip0_size) + part->size = MTDPART_SIZ_FULL; } static int intel_spi_read_desc(struct intel_spi *ispi) @@ -1346,9 +1353,14 @@ static int intel_spi_read_desc(struct intel_spi *ispi) static int intel_spi_populate_chip(struct intel_spi *ispi) { struct flash_platform_data *pdata; + struct mtd_partition *parts; struct spi_board_info chip; int ret; + ret = intel_spi_read_desc(ispi); + if (ret) + return ret; + pdata = devm_kzalloc(ispi->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return -ENOMEM; @@ -1368,15 +1380,27 @@ static int intel_spi_populate_chip(struct intel_spi *ispi) if (!spi_new_device(ispi->host, &chip)) return -ENODEV; - ret = intel_spi_read_desc(ispi); - if (ret) - return ret; - /* Add the second chip if present */ if (ispi->host->num_chipselect < 2) return 0; - chip.platform_data = NULL; + pdata = devm_kzalloc(ispi->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->name = devm_kasprintf(ispi->dev, GFP_KERNEL, "%s-chip1", + dev_name(ispi->dev)); + pdata->nr_parts = 1; + parts = devm_kcalloc(ispi->dev, pdata->nr_parts, sizeof(*parts), + GFP_KERNEL); + if (!parts) + return -ENOMEM; + + parts[0].size = MTDPART_SIZ_FULL; + parts[0].name = "BIOS1"; + pdata->parts = parts; + + chip.platform_data = pdata; chip.chip_select = 1; if (!spi_new_device(ispi->host, &chip)) diff --git a/drivers/spi/spi-lm70llp.c b/drivers/spi/spi-lm70llp.c index e6a65b5c8c..3c0c24ed1f 100644 --- a/drivers/spi/spi-lm70llp.c +++ b/drivers/spi/spi-lm70llp.c @@ -29,10 +29,10 @@ * * Datasheet and Schematic: * The LM70 is a temperature sensor chip from National Semiconductor; its - * datasheet is available at http://www.national.com/pf/LM/LM70.html + * datasheet is available at https://www.ti.com/lit/gpn/lm70 * The schematic for this particular board (the LM70EVAL-LLP) is * available (on page 4) here: - * http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf + * https://download.datasheets.com/pdfs/documentation/nat/kit&board/lm70llpevalmanual.pdf * * Also see Documentation/spi/spi-lm70llp.rst. The SPI<->parport code here is * (heavily) based on spi-butterfly by David Brownell. @@ -212,7 +212,7 @@ static void spi_lm70llp_attach(struct parport *p) /* * SPI and bitbang hookup. */ - pp->bitbang.master = host; + pp->bitbang.ctlr = host; pp->bitbang.chipselect = lm70_chipselect; pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx; pp->bitbang.flags = SPI_3WIRE; @@ -264,7 +264,7 @@ static void spi_lm70llp_attach(struct parport *p) * the board info's (void *)controller_data. */ pp->info.controller_data = pp; - pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info); + pp->spidev_lm70 = spi_new_device(pp->bitbang.ctlr, &pp->info); if (pp->spidev_lm70) dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n", dev_name(&pp->spidev_lm70->dev)); @@ -309,7 +309,7 @@ static void spi_lm70llp_detach(struct parport *p) parport_release(pp->pd); parport_unregister_device(pp->pd); - spi_controller_put(pp->bitbang.master); + spi_controller_put(pp->bitbang.ctlr); lm70llp = NULL; } diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c index bbf2015d8e..fee8893d27 100644 --- a/drivers/spi/spi-loopback-test.c +++ b/drivers/spi/spi-loopback-test.c @@ -1031,8 +1031,8 @@ int spi_test_run_test(struct spi_device *spi, const struct spi_test *test, #define FOR_EACH_ALIGNMENT(var) \ for (var = 0; \ var < (test->iterate_##var ? \ - (spi->master->dma_alignment ? \ - spi->master->dma_alignment : \ + (spi->controller->dma_alignment ? \ + spi->controller->dma_alignment : \ test->iterate_##var) : \ 1); \ var++) diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 109dac2e69..e4cb22fe00 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/gpio/consumer.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/platform_data/spi-mt65xx.h> #include <linux/pm_runtime.h> @@ -1318,6 +1319,8 @@ static int mtk_spi_suspend(struct device *dev) clk_disable_unprepare(mdata->spi_hclk); } + pinctrl_pm_select_sleep_state(dev); + return 0; } @@ -1327,6 +1330,8 @@ static int mtk_spi_resume(struct device *dev) struct spi_controller *host = dev_get_drvdata(dev); struct mtk_spi *mdata = spi_controller_get_devdata(host); + pinctrl_pm_select_default_state(dev); + if (!pm_runtime_suspended(dev)) { ret = clk_prepare_enable(mdata->spi_clk); if (ret < 0) { diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index e13f678f23..88397f712a 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -591,7 +591,7 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f, for (i = 0; i < ARRAY_SIZE(lutval); i++) fspi_writel(f, lutval[i], base + FSPI_LUT_REG(i)); - dev_dbg(f->dev, "CMD[%x] lutval[0:%x \t 1:%x \t 2:%x \t 3:%x], size: 0x%08x\n", + dev_dbg(f->dev, "CMD[%02x] lutval[0:%08x 1:%08x 2:%08x 3:%08x], size: 0x%08x\n", op->cmd.opcode, lutval[0], lutval[1], lutval[2], lutval[3], op->data.nbytes); /* lock LUT */ diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c index cf7c111088..6ea38f5e7d 100644 --- a/drivers/spi/spi-oc-tiny.c +++ b/drivers/spi/spi-oc-tiny.c @@ -194,7 +194,7 @@ static int tiny_spi_of_probe(struct platform_device *pdev) if (!np) return 0; - hw->bitbang.master->dev.of_node = pdev->dev.of_node; + hw->bitbang.ctlr->dev.of_node = pdev->dev.of_node; if (!of_property_read_u32(np, "clock-frequency", &val)) hw->freq = val; if (!of_property_read_u32(np, "baud-width", &val)) @@ -229,7 +229,7 @@ static int tiny_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, hw); /* setup the state for the bitbang driver */ - hw->bitbang.master = host; + hw->bitbang.ctlr = host; hw->bitbang.setup_transfer = tiny_spi_setup_transfer; hw->bitbang.txrx_bufs = tiny_spi_txrx_bufs; @@ -274,7 +274,7 @@ exit: static void tiny_spi_remove(struct platform_device *pdev) { struct tiny_spi *hw = platform_get_drvdata(pdev); - struct spi_controller *host = hw->bitbang.master; + struct spi_controller *host = hw->bitbang.ctlr; spi_bitbang_stop(&hw->bitbang); spi_controller_put(host); diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 2dd1c1bcf4..210a98d903 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -448,7 +448,7 @@ static void uwire_off(struct uwire_spi *uwire) { uwire_write_reg(UWIRE_SR3, 0); clk_disable_unprepare(uwire->ck); - spi_controller_put(uwire->bitbang.master); + spi_controller_put(uwire->bitbang.ctlr); } static int uwire_probe(struct platform_device *pdev) @@ -493,7 +493,7 @@ static int uwire_probe(struct platform_device *pdev) host->setup = uwire_setup; host->cleanup = uwire_cleanup; - uwire->bitbang.master = host; + uwire->bitbang.ctlr = host; uwire->bitbang.chipselect = uwire_chipselect; uwire->bitbang.setup_transfer = uwire_setup_transfer; uwire->bitbang.txrx_bufs = uwire_txrx; diff --git a/drivers/spi/spi-pci1xxxx.c b/drivers/spi/spi-pci1xxxx.c index 5a42266820..cc18d32037 100644 --- a/drivers/spi/spi-pci1xxxx.c +++ b/drivers/spi/spi-pci1xxxx.c @@ -5,8 +5,15 @@ // Kumaravel Thiagarajan <Kumaravel.Thiagarajan@microchip.com> +#include <linux/bitfield.h> +#include <linux/dma-mapping.h> +#include <linux/iopoll.h> +#include <linux/irq.h> #include <linux/module.h> +#include <linux/msi.h> +#include <linux/pci_regs.h> #include <linux/pci.h> +#include <linux/spinlock.h> #include <linux/spi/spi.h> #include <linux/delay.h> @@ -32,8 +39,68 @@ #define SPI_MST_CTL_MODE_SEL (BIT(2)) #define SPI_MST_CTL_GO (BIT(0)) +#define SPI_PERI_ADDR_BASE (0x160000) +#define SPI_SYSTEM_ADDR_BASE (0x2000) #define SPI_MST1_ADDR_BASE (0x800) +#define DEV_REV_REG (SPI_SYSTEM_ADDR_BASE + 0x00) +#define SPI_SYSLOCK_REG (SPI_SYSTEM_ADDR_BASE + 0xA0) +#define SPI_CONFIG_PERI_ENABLE_REG (SPI_SYSTEM_ADDR_BASE + 0x108) + +#define SPI_PERI_ENBLE_PF_MASK (GENMASK(17, 16)) +#define DEV_REV_MASK (GENMASK(7, 0)) + +#define SPI_SYSLOCK BIT(4) +#define SPI0 (0) +#define SPI1 (1) + +/* DMA Related Registers */ +#define SPI_DMA_ADDR_BASE (0x1000) +#define SPI_DMA_GLOBAL_WR_ENGINE_EN (SPI_DMA_ADDR_BASE + 0x0C) +#define SPI_DMA_WR_DOORBELL_REG (SPI_DMA_ADDR_BASE + 0x10) +#define SPI_DMA_GLOBAL_RD_ENGINE_EN (SPI_DMA_ADDR_BASE + 0x2C) +#define SPI_DMA_RD_DOORBELL_REG (SPI_DMA_ADDR_BASE + 0x30) +#define SPI_DMA_INTR_WR_STS (SPI_DMA_ADDR_BASE + 0x4C) +#define SPI_DMA_WR_INT_MASK (SPI_DMA_ADDR_BASE + 0x54) +#define SPI_DMA_INTR_WR_CLR (SPI_DMA_ADDR_BASE + 0x58) +#define SPI_DMA_ERR_WR_STS (SPI_DMA_ADDR_BASE + 0x5C) +#define SPI_DMA_INTR_IMWR_WDONE_LOW (SPI_DMA_ADDR_BASE + 0x60) +#define SPI_DMA_INTR_IMWR_WDONE_HIGH (SPI_DMA_ADDR_BASE + 0x64) +#define SPI_DMA_INTR_IMWR_WABORT_LOW (SPI_DMA_ADDR_BASE + 0x68) +#define SPI_DMA_INTR_IMWR_WABORT_HIGH (SPI_DMA_ADDR_BASE + 0x6C) +#define SPI_DMA_INTR_WR_IMWR_DATA (SPI_DMA_ADDR_BASE + 0x70) +#define SPI_DMA_INTR_RD_STS (SPI_DMA_ADDR_BASE + 0xA0) +#define SPI_DMA_RD_INT_MASK (SPI_DMA_ADDR_BASE + 0xA8) +#define SPI_DMA_INTR_RD_CLR (SPI_DMA_ADDR_BASE + 0xAC) +#define SPI_DMA_ERR_RD_STS (SPI_DMA_ADDR_BASE + 0xB8) +#define SPI_DMA_INTR_IMWR_RDONE_LOW (SPI_DMA_ADDR_BASE + 0xCC) +#define SPI_DMA_INTR_IMWR_RDONE_HIGH (SPI_DMA_ADDR_BASE + 0xD0) +#define SPI_DMA_INTR_IMWR_RABORT_LOW (SPI_DMA_ADDR_BASE + 0xD4) +#define SPI_DMA_INTR_IMWR_RABORT_HIGH (SPI_DMA_ADDR_BASE + 0xD8) +#define SPI_DMA_INTR_RD_IMWR_DATA (SPI_DMA_ADDR_BASE + 0xDC) + +#define SPI_DMA_CH0_WR_BASE (SPI_DMA_ADDR_BASE + 0x200) +#define SPI_DMA_CH0_RD_BASE (SPI_DMA_ADDR_BASE + 0x300) +#define SPI_DMA_CH1_WR_BASE (SPI_DMA_ADDR_BASE + 0x400) +#define SPI_DMA_CH1_RD_BASE (SPI_DMA_ADDR_BASE + 0x500) + +#define SPI_DMA_CH_CTL1_OFFSET (0x00) +#define SPI_DMA_CH_XFER_LEN_OFFSET (0x08) +#define SPI_DMA_CH_SAR_LO_OFFSET (0x0C) +#define SPI_DMA_CH_SAR_HI_OFFSET (0x10) +#define SPI_DMA_CH_DAR_LO_OFFSET (0x14) +#define SPI_DMA_CH_DAR_HI_OFFSET (0x18) + +#define SPI_DMA_CH0_DONE_INT BIT(0) +#define SPI_DMA_CH1_DONE_INT BIT(1) +#define SPI_DMA_CH0_ABORT_INT BIT(16) +#define SPI_DMA_CH1_ABORT_INT BIT(17) +#define SPI_DMA_DONE_INT_MASK (SPI_DMA_CH0_DONE_INT | SPI_DMA_CH1_DONE_INT) +#define SPI_DMA_ABORT_INT_MASK (SPI_DMA_CH0_ABORT_INT | SPI_DMA_CH1_ABORT_INT) +#define DMA_CH_CONTROL_LIE BIT(3) +#define DMA_CH_CONTROL_RIE BIT(4) +#define DMA_INTR_EN (DMA_CH_CONTROL_RIE | DMA_CH_CONTROL_LIE) + /* x refers to SPI Host Controller HW instance id in the below macros - 0 or 1 */ #define SPI_MST_CMD_BUF_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x00) @@ -50,6 +117,9 @@ #define SPI_MAX_DATA_LEN 320 #define PCI1XXXX_SPI_TIMEOUT (msecs_to_jiffies(100)) +#define SYSLOCK_RETRY_CNT (1000) +#define SPI_DMA_ENGINE_EN (0x1) +#define SPI_DMA_ENGINE_DIS (0x0) #define SPI_INTR BIT(8) #define SPI_FORCE_CE BIT(4) @@ -62,11 +132,21 @@ struct pci1xxxx_spi_internal { u8 hw_inst; - bool spi_xfer_in_progress; + u8 clkdiv; int irq; + int mode; + bool spi_xfer_in_progress; + void *rx_buf; + bool dma_aborted_rd; + u32 bytes_recvd; + u32 tx_sgl_len; + u32 rx_sgl_len; + struct scatterlist *tx_sgl, *rx_sgl; + bool dma_aborted_wr; struct completion spi_xfer_done; struct spi_controller *spi_host; struct pci1xxxx_spi *parent; + struct spi_transfer *xfer; struct { unsigned int dev_sel : 3; unsigned int msi_vector_sel : 1; @@ -76,7 +156,12 @@ struct pci1xxxx_spi_internal { struct pci1xxxx_spi { struct pci_dev *dev; u8 total_hw_instances; + u8 dev_rev; void __iomem *reg_base; + void __iomem *dma_offset_bar; + /* lock to safely access the DMA registers in isr */ + spinlock_t dma_reg_lock; + bool can_dma; struct pci1xxxx_spi_internal *spi_int[] __counted_by(total_hw_instances); }; @@ -106,6 +191,114 @@ static const struct pci_device_id pci1xxxx_spi_pci_id_table[] = { MODULE_DEVICE_TABLE(pci, pci1xxxx_spi_pci_id_table); +static int pci1xxxx_set_sys_lock(struct pci1xxxx_spi *par) +{ + writel(SPI_SYSLOCK, par->reg_base + SPI_SYSLOCK_REG); + return readl(par->reg_base + SPI_SYSLOCK_REG); +} + +static int pci1xxxx_acquire_sys_lock(struct pci1xxxx_spi *par) +{ + u32 regval; + + return readx_poll_timeout(pci1xxxx_set_sys_lock, par, regval, + (regval & SPI_SYSLOCK), 100, + SYSLOCK_RETRY_CNT * 100); +} + +static void pci1xxxx_release_sys_lock(struct pci1xxxx_spi *par) +{ + writel(0x0, par->reg_base + SPI_SYSLOCK_REG); +} + +static int pci1xxxx_check_spi_can_dma(struct pci1xxxx_spi *spi_bus, int irq) +{ + struct pci_dev *pdev = spi_bus->dev; + u32 pf_num; + u32 regval; + int ret; + + /* + * DEV REV Registers is a system register, HW Syslock bit + * should be acquired before accessing the register + */ + ret = pci1xxxx_acquire_sys_lock(spi_bus); + if (ret) { + dev_err(&pdev->dev, "Error failed to acquire syslock\n"); + return ret; + } + + regval = readl(spi_bus->reg_base + DEV_REV_REG); + spi_bus->dev_rev = regval & DEV_REV_MASK; + if (spi_bus->dev_rev >= 0xC0) { + regval = readl(spi_bus->reg_base + + SPI_CONFIG_PERI_ENABLE_REG); + pf_num = regval & SPI_PERI_ENBLE_PF_MASK; + } + + pci1xxxx_release_sys_lock(spi_bus); + + /* + * DMA is supported only from C0 and SPI can use DMA only if + * it is mapped to PF0 + */ + if (spi_bus->dev_rev < 0xC0 || pf_num) + return -EOPNOTSUPP; + + /* + * DMA Supported only with MSI Interrupts + * One of the SPI instance's MSI vector address and data + * is used for DMA Interrupt + */ + if (!irq_get_msi_desc(irq)) { + dev_warn(&pdev->dev, "Error MSI Interrupt not supported, will operate in PIO mode\n"); + return -EOPNOTSUPP; + } + + spi_bus->dma_offset_bar = pcim_iomap(pdev, 2, pci_resource_len(pdev, 2)); + if (!spi_bus->dma_offset_bar) { + dev_warn(&pdev->dev, "Error failed to map dma bar, will operate in PIO mode\n"); + return -EOPNOTSUPP; + } + + if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { + dev_warn(&pdev->dev, "Error failed to set DMA mask, will operate in PIO mode\n"); + pcim_iounmap(pdev, spi_bus->dma_offset_bar); + spi_bus->dma_offset_bar = NULL; + return -EOPNOTSUPP; + } + + return 0; +} + +static int pci1xxxx_spi_dma_init(struct pci1xxxx_spi *spi_bus, int irq) +{ + struct msi_msg msi; + int ret; + + ret = pci1xxxx_check_spi_can_dma(spi_bus, irq); + if (ret) + return ret; + + spin_lock_init(&spi_bus->dma_reg_lock); + get_cached_msi_msg(irq, &msi); + writel(SPI_DMA_ENGINE_EN, spi_bus->dma_offset_bar + SPI_DMA_GLOBAL_WR_ENGINE_EN); + writel(SPI_DMA_ENGINE_EN, spi_bus->dma_offset_bar + SPI_DMA_GLOBAL_RD_ENGINE_EN); + writel(msi.address_hi, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_WDONE_HIGH); + writel(msi.address_hi, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_WABORT_HIGH); + writel(msi.address_hi, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_RDONE_HIGH); + writel(msi.address_hi, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_RABORT_HIGH); + writel(msi.address_lo, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_WDONE_LOW); + writel(msi.address_lo, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_WABORT_LOW); + writel(msi.address_lo, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_RDONE_LOW); + writel(msi.address_lo, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_RABORT_LOW); + writel(msi.data, spi_bus->dma_offset_bar + SPI_DMA_INTR_WR_IMWR_DATA); + writel(msi.data, spi_bus->dma_offset_bar + SPI_DMA_INTR_RD_IMWR_DATA); + dma_set_max_seg_size(&spi_bus->dev->dev, PCI1XXXX_SPI_BUFFER_SIZE); + spi_bus->can_dma = true; + return 0; +} + static void pci1xxxx_spi_set_cs(struct spi_device *spi, bool enable) { struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(spi->controller); @@ -146,12 +339,79 @@ static u8 pci1xxxx_get_clock_div(u32 hz) return val; } -static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, - struct spi_device *spi, struct spi_transfer *xfer) +static void pci1xxxx_spi_setup_dma_to_io(struct pci1xxxx_spi_internal *p, + dma_addr_t dma_addr, u32 len) +{ + void __iomem *base; + + if (!p->hw_inst) + base = p->parent->dma_offset_bar + SPI_DMA_CH0_RD_BASE; + else + base = p->parent->dma_offset_bar + SPI_DMA_CH1_RD_BASE; + + writel(DMA_INTR_EN, base + SPI_DMA_CH_CTL1_OFFSET); + writel(len, base + SPI_DMA_CH_XFER_LEN_OFFSET); + writel(lower_32_bits(dma_addr), base + SPI_DMA_CH_SAR_LO_OFFSET); + writel(upper_32_bits(dma_addr), base + SPI_DMA_CH_SAR_HI_OFFSET); + /* Updated SPI Command Registers */ + writel(lower_32_bits(SPI_PERI_ADDR_BASE + SPI_MST_CMD_BUF_OFFSET(p->hw_inst)), + base + SPI_DMA_CH_DAR_LO_OFFSET); + writel(upper_32_bits(SPI_PERI_ADDR_BASE + SPI_MST_CMD_BUF_OFFSET(p->hw_inst)), + base + SPI_DMA_CH_DAR_HI_OFFSET); +} + +static void pci1xxxx_spi_setup_dma_from_io(struct pci1xxxx_spi_internal *p, + dma_addr_t dma_addr, u32 len) +{ + void *base; + + if (!p->hw_inst) + base = p->parent->dma_offset_bar + SPI_DMA_CH0_WR_BASE; + else + base = p->parent->dma_offset_bar + SPI_DMA_CH1_WR_BASE; + + writel(DMA_INTR_EN, base + SPI_DMA_CH_CTL1_OFFSET); + writel(len, base + SPI_DMA_CH_XFER_LEN_OFFSET); + writel(lower_32_bits(dma_addr), base + SPI_DMA_CH_DAR_LO_OFFSET); + writel(upper_32_bits(dma_addr), base + SPI_DMA_CH_DAR_HI_OFFSET); + writel(lower_32_bits(SPI_PERI_ADDR_BASE + SPI_MST_RSP_BUF_OFFSET(p->hw_inst)), + base + SPI_DMA_CH_SAR_LO_OFFSET); + writel(upper_32_bits(SPI_PERI_ADDR_BASE + SPI_MST_RSP_BUF_OFFSET(p->hw_inst)), + base + SPI_DMA_CH_SAR_HI_OFFSET); +} + +static void pci1xxxx_spi_setup(struct pci1xxxx_spi *par, u8 hw_inst, u32 mode, + u8 clkdiv, u32 len) +{ + u32 regval; + + regval = readl(par->reg_base + SPI_MST_CTL_REG_OFFSET(hw_inst)); + regval &= ~(SPI_MST_CTL_MODE_SEL | SPI_MST_CTL_CMD_LEN_MASK | + SPI_MST_CTL_SPEED_MASK); + + if (mode == SPI_MODE_3) + regval |= SPI_MST_CTL_MODE_SEL; + + regval |= FIELD_PREP(SPI_MST_CTL_CMD_LEN_MASK, len); + regval |= FIELD_PREP(SPI_MST_CTL_SPEED_MASK, clkdiv); + writel(regval, par->reg_base + SPI_MST_CTL_REG_OFFSET(hw_inst)); +} + +static void pci1xxxx_start_spi_xfer(struct pci1xxxx_spi_internal *p, u8 hw_inst) +{ + u32 regval; + + regval = readl(p->parent->reg_base + SPI_MST_CTL_REG_OFFSET(hw_inst)); + regval |= SPI_MST_CTL_GO; + writel(regval, p->parent->reg_base + SPI_MST_CTL_REG_OFFSET(hw_inst)); +} + +static int pci1xxxx_spi_transfer_with_io(struct spi_controller *spi_ctlr, + struct spi_device *spi, struct spi_transfer *xfer) { struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(spi_ctlr); - int mode, len, loop_iter, transfer_len; struct pci1xxxx_spi *par = p->parent; + int len, loop_iter, transfer_len; unsigned long bytes_transfered; unsigned long bytes_recvd; unsigned long loop_count; @@ -161,7 +421,7 @@ static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, u8 clkdiv; p->spi_xfer_in_progress = true; - mode = spi->mode; + p->bytes_recvd = 0; clkdiv = pci1xxxx_get_clock_div(xfer->speed_hz); tx_buf = xfer->tx_buf; rx_buf = xfer->rx_buf; @@ -186,26 +446,8 @@ static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, memcpy_toio(par->reg_base + SPI_MST_CMD_BUF_OFFSET(p->hw_inst), &tx_buf[bytes_transfered], len); bytes_transfered += len; - regval = readl(par->reg_base + - SPI_MST_CTL_REG_OFFSET(p->hw_inst)); - regval &= ~(SPI_MST_CTL_MODE_SEL | SPI_MST_CTL_CMD_LEN_MASK | - SPI_MST_CTL_SPEED_MASK); - - if (mode == SPI_MODE_3) - regval |= SPI_MST_CTL_MODE_SEL; - else - regval &= ~SPI_MST_CTL_MODE_SEL; - - regval |= (clkdiv << 5); - regval &= ~SPI_MST_CTL_CMD_LEN_MASK; - regval |= (len << 8); - writel(regval, par->reg_base + - SPI_MST_CTL_REG_OFFSET(p->hw_inst)); - regval = readl(par->reg_base + - SPI_MST_CTL_REG_OFFSET(p->hw_inst)); - regval |= SPI_MST_CTL_GO; - writel(regval, par->reg_base + - SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + pci1xxxx_spi_setup(par, p->hw_inst, spi->mode, clkdiv, len); + pci1xxxx_start_spi_xfer(p, p->hw_inst); /* Wait for DMA_TERM interrupt */ result = wait_for_completion_timeout(&p->spi_xfer_done, @@ -225,7 +467,113 @@ static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, return 0; } -static irqreturn_t pci1xxxx_spi_isr(int irq, void *dev) +static int pci1xxxx_spi_transfer_with_dma(struct spi_controller *spi_ctlr, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(spi_ctlr); + struct pci1xxxx_spi *par = p->parent; + dma_addr_t rx_dma_addr = 0; + dma_addr_t tx_dma_addr = 0; + int ret = 0; + u32 regval; + + p->spi_xfer_in_progress = true; + p->tx_sgl = xfer->tx_sg.sgl; + p->rx_sgl = xfer->rx_sg.sgl; + p->rx_buf = xfer->rx_buf; + regval = readl(par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + writel(regval, par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + + if (!xfer->tx_buf || !p->tx_sgl) { + ret = -EINVAL; + goto error; + } + p->xfer = xfer; + p->mode = spi->mode; + p->clkdiv = pci1xxxx_get_clock_div(xfer->speed_hz); + p->bytes_recvd = 0; + p->rx_buf = xfer->rx_buf; + regval = readl(par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + writel(regval, par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + + tx_dma_addr = sg_dma_address(p->tx_sgl); + rx_dma_addr = sg_dma_address(p->rx_sgl); + p->tx_sgl_len = sg_dma_len(p->tx_sgl); + p->rx_sgl_len = sg_dma_len(p->rx_sgl); + pci1xxxx_spi_setup(par, p->hw_inst, p->mode, p->clkdiv, p->tx_sgl_len); + pci1xxxx_spi_setup_dma_to_io(p, (tx_dma_addr), p->tx_sgl_len); + if (rx_dma_addr) + pci1xxxx_spi_setup_dma_from_io(p, rx_dma_addr, p->rx_sgl_len); + writel(p->hw_inst, par->dma_offset_bar + SPI_DMA_RD_DOORBELL_REG); + + reinit_completion(&p->spi_xfer_done); + /* Wait for DMA_TERM interrupt */ + ret = wait_for_completion_timeout(&p->spi_xfer_done, PCI1XXXX_SPI_TIMEOUT); + if (!ret) { + ret = -ETIMEDOUT; + if (p->dma_aborted_rd) { + writel(SPI_DMA_ENGINE_DIS, + par->dma_offset_bar + SPI_DMA_GLOBAL_RD_ENGINE_EN); + /* + * DMA ENGINE reset takes time if any TLP + * completeion in progress, should wait + * till DMA Engine reset is completed. + */ + ret = readl_poll_timeout(par->dma_offset_bar + + SPI_DMA_GLOBAL_RD_ENGINE_EN, regval, + (regval == 0x0), 0, USEC_PER_MSEC); + if (ret) { + ret = -ECANCELED; + goto error; + } + writel(SPI_DMA_ENGINE_EN, + par->dma_offset_bar + SPI_DMA_GLOBAL_RD_ENGINE_EN); + p->dma_aborted_rd = false; + ret = -ECANCELED; + } + if (p->dma_aborted_wr) { + writel(SPI_DMA_ENGINE_DIS, + par->dma_offset_bar + SPI_DMA_GLOBAL_WR_ENGINE_EN); + + /* + * DMA ENGINE reset takes time if any TLP + * completeion in progress, should wait + * till DMA Engine reset is completed. + */ + ret = readl_poll_timeout(par->dma_offset_bar + + SPI_DMA_GLOBAL_WR_ENGINE_EN, regval, + (regval == 0x0), 0, USEC_PER_MSEC); + if (ret) { + ret = -ECANCELED; + goto error; + } + + writel(SPI_DMA_ENGINE_EN, + par->dma_offset_bar + SPI_DMA_GLOBAL_WR_ENGINE_EN); + p->dma_aborted_wr = false; + ret = -ECANCELED; + } + goto error; + } + ret = 0; + +error: + p->spi_xfer_in_progress = false; + + return ret; +} + +static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, + struct spi_device *spi, struct spi_transfer *xfer) +{ + if (spi_ctlr->can_dma(spi_ctlr, spi, xfer) && spi_ctlr->cur_msg_mapped) + return pci1xxxx_spi_transfer_with_dma(spi_ctlr, spi, xfer); + else + return pci1xxxx_spi_transfer_with_io(spi_ctlr, spi, xfer); +} + +static irqreturn_t pci1xxxx_spi_isr_io(int irq, void *dev) { struct pci1xxxx_spi_internal *p = dev; irqreturn_t spi_int_fired = IRQ_NONE; @@ -235,15 +583,117 @@ static irqreturn_t pci1xxxx_spi_isr(int irq, void *dev) regval = readl(p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); if (regval & SPI_INTR) { /* Clear xfer_done */ + if (p->parent->can_dma && p->rx_buf) + writel(p->hw_inst, p->parent->dma_offset_bar + + SPI_DMA_WR_DOORBELL_REG); + else + complete(&p->parent->spi_int[p->hw_inst]->spi_xfer_done); + spi_int_fired = IRQ_HANDLED; + } + writel(regval, p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + return spi_int_fired; +} + +static void pci1xxxx_spi_setup_next_dma_transfer(struct pci1xxxx_spi_internal *p) +{ + dma_addr_t tx_dma_addr = 0; + dma_addr_t rx_dma_addr = 0; + u32 prev_len; + + p->tx_sgl = sg_next(p->tx_sgl); + if (p->rx_sgl) + p->rx_sgl = sg_next(p->rx_sgl); + if (!p->tx_sgl) { + /* Clear xfer_done */ complete(&p->spi_xfer_done); + } else { + tx_dma_addr = sg_dma_address(p->tx_sgl); + prev_len = p->tx_sgl_len; + p->tx_sgl_len = sg_dma_len(p->tx_sgl); + if (prev_len != p->tx_sgl_len) + pci1xxxx_spi_setup(p->parent, + p->hw_inst, p->mode, p->clkdiv, p->tx_sgl_len); + pci1xxxx_spi_setup_dma_to_io(p, tx_dma_addr, p->tx_sgl_len); + if (p->rx_sgl) { + rx_dma_addr = sg_dma_address(p->rx_sgl); + p->rx_sgl_len = sg_dma_len(p->rx_sgl); + pci1xxxx_spi_setup_dma_from_io(p, rx_dma_addr, p->rx_sgl_len); + } + writel(p->hw_inst, p->parent->dma_offset_bar + SPI_DMA_RD_DOORBELL_REG); + } +} + +static irqreturn_t pci1xxxx_spi_isr_dma(int irq, void *dev) +{ + struct pci1xxxx_spi_internal *p = dev; + irqreturn_t spi_int_fired = IRQ_NONE; + unsigned long flags; + u32 regval; + + spin_lock_irqsave(&p->parent->dma_reg_lock, flags); + /* Clear the DMA RD INT and start spi xfer*/ + regval = readl(p->parent->dma_offset_bar + SPI_DMA_INTR_RD_STS); + if (regval & SPI_DMA_DONE_INT_MASK) { + if (regval & SPI_DMA_CH0_DONE_INT) + pci1xxxx_start_spi_xfer(p, SPI0); + if (regval & SPI_DMA_CH1_DONE_INT) + pci1xxxx_start_spi_xfer(p, SPI1); + spi_int_fired = IRQ_HANDLED; + } + if (regval & SPI_DMA_ABORT_INT_MASK) { + p->dma_aborted_rd = true; spi_int_fired = IRQ_HANDLED; } + writel(regval, p->parent->dma_offset_bar + SPI_DMA_INTR_RD_CLR); - writel(regval, p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + /* Clear the DMA WR INT */ + regval = readl(p->parent->dma_offset_bar + SPI_DMA_INTR_WR_STS); + if (regval & SPI_DMA_DONE_INT_MASK) { + if (regval & SPI_DMA_CH0_DONE_INT) + pci1xxxx_spi_setup_next_dma_transfer(p->parent->spi_int[SPI0]); + if (regval & SPI_DMA_CH1_DONE_INT) + pci1xxxx_spi_setup_next_dma_transfer(p->parent->spi_int[SPI1]); + + spi_int_fired = IRQ_HANDLED; + } + if (regval & SPI_DMA_ABORT_INT_MASK) { + p->dma_aborted_wr = true; + spi_int_fired = IRQ_HANDLED; + } + writel(regval, p->parent->dma_offset_bar + SPI_DMA_INTR_WR_CLR); + spin_unlock_irqrestore(&p->parent->dma_reg_lock, flags); + + /* Clear the SPI GO_BIT Interrupt */ + regval = readl(p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + if (regval & SPI_INTR) { + writel(p->hw_inst, p->parent->dma_offset_bar + SPI_DMA_WR_DOORBELL_REG); + spi_int_fired = IRQ_HANDLED; + } + writel(regval, p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); return spi_int_fired; } +static irqreturn_t pci1xxxx_spi_isr(int irq, void *dev) +{ + struct pci1xxxx_spi_internal *p = dev; + + if (p->spi_host->can_dma(p->spi_host, NULL, p->xfer)) + return pci1xxxx_spi_isr_dma(irq, dev); + else + return pci1xxxx_spi_isr_io(irq, dev); +} + +static bool pci1xxxx_spi_can_dma(struct spi_controller *host, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(host); + struct pci1xxxx_spi *par = p->parent; + + return par->can_dma; +} + static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { u8 hw_inst_cnt, iter, start, only_sec_inst; @@ -326,6 +776,10 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id * goto error; } + ret = pci1xxxx_spi_dma_init(spi_bus, spi_sub_ptr->irq); + if (ret && ret != -EOPNOTSUPP) + goto error; + /* This register is only applicable for 1st instance */ regval = readl(spi_bus->reg_base + SPI_PCI_CTRL_REG_OFFSET(0)); if (!only_sec_inst) @@ -362,7 +816,9 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id * spi_host->num_chipselect = SPI_CHIP_SEL_COUNT; spi_host->mode_bits = SPI_MODE_0 | SPI_MODE_3 | SPI_RX_DUAL | SPI_TX_DUAL | SPI_LOOP; + spi_host->can_dma = pci1xxxx_spi_can_dma; spi_host->transfer_one = pci1xxxx_spi_transfer_one; + spi_host->set_cs = pci1xxxx_spi_set_cs; spi_host->bits_per_word_mask = SPI_BPW_MASK(8); spi_host->max_speed_hz = PCI1XXXX_SPI_MAX_CLOCK_HZ; diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c index f55b38c577..709edb70ad 100644 --- a/drivers/spi/spi-pic32.c +++ b/drivers/spi/spi-pic32.c @@ -11,13 +11,13 @@ #include <linux/delay.h> #include <linux/dmaengine.h> #include <linux/dma-mapping.h> +#include <linux/gpio/consumer.h> #include <linux/highmem.h> #include <linux/module.h> #include <linux/io.h> #include <linux/interrupt.h> #include <linux/of.h> #include <linux/of_irq.h> -#include <linux/of_gpio.h> #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c index 82d6264841..942c3117ab 100644 --- a/drivers/spi/spi-ppc4xx.c +++ b/drivers/spi/spi-ppc4xx.c @@ -359,22 +359,22 @@ static int spi_ppc4xx_of_probe(struct platform_device *op) /* Setup the state for the bitbang driver */ bbp = &hw->bitbang; - bbp->master = hw->host; + bbp->ctlr = hw->host; bbp->setup_transfer = spi_ppc4xx_setupxfer; bbp->txrx_bufs = spi_ppc4xx_txrx; bbp->use_dma = 0; - bbp->master->setup = spi_ppc4xx_setup; - bbp->master->cleanup = spi_ppc4xx_cleanup; - bbp->master->bits_per_word_mask = SPI_BPW_MASK(8); - bbp->master->use_gpio_descriptors = true; + bbp->ctlr->setup = spi_ppc4xx_setup; + bbp->ctlr->cleanup = spi_ppc4xx_cleanup; + bbp->ctlr->bits_per_word_mask = SPI_BPW_MASK(8); + bbp->ctlr->use_gpio_descriptors = true; /* * The SPI core will count the number of GPIO descriptors to figure * out the number of chip selects available on the platform. */ - bbp->master->num_chipselect = 0; + bbp->ctlr->num_chipselect = 0; /* the spi->mode bits understood by this driver: */ - bbp->master->mode_bits = + bbp->ctlr->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST; /* Get the clock for the OPB */ diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 4b9669da2c..e1ecd96c78 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -160,8 +160,7 @@ */ #define ROCKCHIP_SPI_MAX_TRANLEN 0xffff -/* 2 for native cs, 2 for cs-gpio */ -#define ROCKCHIP_SPI_MAX_CS_NUM 4 +#define ROCKCHIP_SPI_MAX_NATIVE_CS_NUM 2 #define ROCKCHIP_SPI_VER2_TYPE1 0x05EC0002 #define ROCKCHIP_SPI_VER2_TYPE2 0x00110002 @@ -192,8 +191,6 @@ struct rockchip_spi { u8 n_bytes; u8 rsd; - bool cs_asserted[ROCKCHIP_SPI_MAX_CS_NUM]; - bool target_abort; bool cs_inactive; /* spi target tansmition stop when cs inactive */ bool cs_high_supported; /* native CS supports active-high polarity */ @@ -245,10 +242,6 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable) struct rockchip_spi *rs = spi_controller_get_devdata(ctlr); bool cs_asserted = spi->mode & SPI_CS_HIGH ? enable : !enable; - /* Return immediately for no-op */ - if (cs_asserted == rs->cs_asserted[spi_get_chipselect(spi, 0)]) - return; - if (cs_asserted) { /* Keep things powered as long as CS is asserted */ pm_runtime_get_sync(rs->dev); @@ -268,8 +261,6 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable) /* Drop reference from when we first asserted CS */ pm_runtime_put(rs->dev); } - - rs->cs_asserted[spi_get_chipselect(spi, 0)] = cs_asserted; } static void rockchip_spi_handle_err(struct spi_controller *ctlr, @@ -847,7 +838,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) ctlr->target_abort = rockchip_spi_target_abort; } else { ctlr->flags = SPI_CONTROLLER_GPIO_SS; - ctlr->max_native_cs = ROCKCHIP_SPI_MAX_CS_NUM; + ctlr->max_native_cs = ROCKCHIP_SPI_MAX_NATIVE_CS_NUM; /* * rk spi0 has two native cs, spi1..5 one cs only * if num-cs is missing in the dts, default to 1 diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 652eadbefe..f726d86704 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -11,12 +11,14 @@ #include <linux/dmaengine.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_data/spi-s3c64xx.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/spi/spi.h> +#include <linux/types.h> #define MAX_SPI_PORTS 12 #define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) @@ -77,6 +79,8 @@ #define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1) #define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0) +#define S3C64XX_SPI_ST_RX_FIFO_RDY_V2 GENMASK(23, 15) +#define S3C64XX_SPI_ST_TX_FIFO_RDY_V2 GENMASK(14, 6) #define S3C64XX_SPI_ST_TX_FIFO_LVL_SHIFT 6 #define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5) #define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) @@ -117,8 +121,6 @@ #define S3C64XX_SPI_MAX_TRAILCNT 0x3ff #define S3C64XX_SPI_TRAILCNT_OFF 19 -#define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT - #define S3C64XX_SPI_POLLING_SIZE 32 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) @@ -135,8 +137,9 @@ struct s3c64xx_spi_dma_data { /** * struct s3c64xx_spi_port_config - SPI Controller hardware info - * @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register. - * @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter. + * @fifo_lvl_mask: [DEPRECATED] use @{rx, tx}_fifomask instead. + * @rx_lvl_offset: [DEPRECATED] use @{rx,tx}_fifomask instead. + * @fifo_depth: depth of the FIFO. * @rx_fifomask: SPI_STATUS.RX_FIFO_LVL mask. Shifted mask defining the field's * length and position. * @tx_fifomask: SPI_STATUS.TX_FIFO_LVL mask. Shifted mask defining the field's @@ -149,6 +152,7 @@ struct s3c64xx_spi_dma_data { * prescaler unit. * @clk_ioclk: True if clock is present on this device * @has_loopback: True if loopback mode can be supported + * @use_32bit_io: True if the SoC allows only 32-bit register accesses. * * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but * differ in some aspects such as the size of the fifo and spi bus clock @@ -158,6 +162,7 @@ struct s3c64xx_spi_dma_data { struct s3c64xx_spi_port_config { int fifo_lvl_mask[MAX_SPI_PORTS]; int rx_lvl_offset; + unsigned int fifo_depth; u32 rx_fifomask; u32 tx_fifomask; int tx_st_done; @@ -167,6 +172,7 @@ struct s3c64xx_spi_port_config { bool clk_from_cmu; bool clk_ioclk; bool has_loopback; + bool use_32bit_io; }; /** @@ -187,8 +193,8 @@ struct s3c64xx_spi_port_config { * @cur_speed: Current clock speed * @rx_dma: Local receive DMA data (e.g. chan and direction) * @tx_dma: Local transmit DMA data (e.g. chan and direction) - * @port_conf: Local SPI port configuartion data - * @port_id: Port identification number + * @port_conf: Local SPI port configuration data + * @port_id: [DEPRECATED] use @{rx,tx}_fifomask instead. * @fifo_depth: depth of the FIFO. * @rx_fifomask: SPI_STATUS.RX_FIFO_LVL mask. Shifted mask defining the field's * length and position. @@ -294,8 +300,8 @@ static void s3c64xx_spi_dmacb(void *data) spin_unlock_irqrestore(&sdd->lock, flags); } -static int prepare_dma(struct s3c64xx_spi_dma_data *dma, - struct sg_table *sgt) +static int s3c64xx_prepare_dma(struct s3c64xx_spi_dma_data *dma, + struct sg_table *sgt) { struct s3c64xx_spi_driver_data *sdd; struct dma_slave_config config; @@ -307,20 +313,20 @@ static int prepare_dma(struct s3c64xx_spi_dma_data *dma, if (dma->direction == DMA_DEV_TO_MEM) { sdd = container_of((void *)dma, struct s3c64xx_spi_driver_data, rx_dma); - config.direction = dma->direction; config.src_addr = sdd->sfr_start + S3C64XX_SPI_RX_DATA; config.src_addr_width = sdd->cur_bpw / 8; config.src_maxburst = 1; - dmaengine_slave_config(dma->ch, &config); } else { sdd = container_of((void *)dma, struct s3c64xx_spi_driver_data, tx_dma); - config.direction = dma->direction; config.dst_addr = sdd->sfr_start + S3C64XX_SPI_TX_DATA; config.dst_addr_width = sdd->cur_bpw / 8; config.dst_maxburst = 1; - dmaengine_slave_config(dma->ch, &config); } + config.direction = dma->direction; + ret = dmaengine_slave_config(dma->ch, &config); + if (ret) + return ret; desc = dmaengine_prep_slave_sg(dma->ch, sgt->sgl, sgt->nents, dma->direction, DMA_PREP_INTERRUPT); @@ -337,7 +343,7 @@ static int prepare_dma(struct s3c64xx_spi_dma_data *dma, ret = dma_submit_error(dma->cookie); if (ret) { dev_err(&sdd->pdev->dev, "DMA submission failed"); - return -EIO; + return ret; } dma_async_issue_pending(dma->ch); @@ -429,6 +435,56 @@ static bool s3c64xx_spi_can_dma(struct spi_controller *host, return false; } +static void s3c64xx_iowrite8_32_rep(volatile void __iomem *addr, + const void *buffer, unsigned int count) +{ + if (count) { + const u8 *buf = buffer; + + do { + __raw_writel(*buf++, addr); + } while (--count); + } +} + +static void s3c64xx_iowrite16_32_rep(volatile void __iomem *addr, + const void *buffer, unsigned int count) +{ + if (count) { + const u16 *buf = buffer; + + do { + __raw_writel(*buf++, addr); + } while (--count); + } +} + +static void s3c64xx_iowrite_rep(const struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer) +{ + void __iomem *addr = sdd->regs + S3C64XX_SPI_TX_DATA; + const void *buf = xfer->tx_buf; + unsigned int len = xfer->len; + + switch (sdd->cur_bpw) { + case 32: + iowrite32_rep(addr, buf, len / 4); + break; + case 16: + if (sdd->port_conf->use_32bit_io) + s3c64xx_iowrite16_32_rep(addr, buf, len / 2); + else + iowrite16_rep(addr, buf, len / 2); + break; + default: + if (sdd->port_conf->use_32bit_io) + s3c64xx_iowrite8_32_rep(addr, buf, len); + else + iowrite8_rep(addr, buf, len); + break; + } +} + static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd, struct spi_transfer *xfer, int dma_mode) { @@ -460,22 +516,9 @@ static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd, chcfg |= S3C64XX_SPI_CH_TXCH_ON; if (dma_mode) { modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - ret = prepare_dma(&sdd->tx_dma, &xfer->tx_sg); + ret = s3c64xx_prepare_dma(&sdd->tx_dma, &xfer->tx_sg); } else { - switch (sdd->cur_bpw) { - case 32: - iowrite32_rep(regs + S3C64XX_SPI_TX_DATA, - xfer->tx_buf, xfer->len / 4); - break; - case 16: - iowrite16_rep(regs + S3C64XX_SPI_TX_DATA, - xfer->tx_buf, xfer->len / 2); - break; - default: - iowrite8_rep(regs + S3C64XX_SPI_TX_DATA, - xfer->tx_buf, xfer->len); - break; - } + s3c64xx_iowrite_rep(sdd, xfer); } } @@ -492,7 +535,7 @@ static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd, writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | S3C64XX_SPI_PACKET_CNT_EN, regs + S3C64XX_SPI_PACKET_CNT); - ret = prepare_dma(&sdd->rx_dma, &xfer->rx_sg); + ret = s3c64xx_prepare_dma(&sdd->rx_dma, &xfer->rx_sg); } } @@ -542,7 +585,7 @@ static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd, /* * If the previous xfer was completed within timeout, then - * proceed further else return -EIO. + * proceed further else return -ETIMEDOUT. * DmaTx returns after simply writing data in the FIFO, * w/o waiting for real transmission on the bus to finish. * DmaRx returns only after Dma read data from FIFO which @@ -563,7 +606,7 @@ static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd, /* If timed out while checking rx/tx status return error */ if (!val) - return -EIO; + return -ETIMEDOUT; return 0; } @@ -593,7 +636,7 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd, if (use_irq) { val = msecs_to_jiffies(ms); if (!wait_for_completion_timeout(&sdd->xfer_completion, val)) - return -EIO; + return -ETIMEDOUT; } val = msecs_to_loops(ms); @@ -1106,8 +1149,7 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd) val = readl(regs + S3C64XX_SPI_MODE_CFG); val &= ~S3C64XX_SPI_MODE_4BURST; - val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); - val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + val |= (S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); writel(val, regs + S3C64XX_SPI_MODE_CFG); s3c64xx_flush_fifo(sdd); @@ -1124,14 +1166,14 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) return ERR_PTR(-ENOMEM); if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) { - dev_warn(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n"); + dev_dbg(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n"); sci->src_clk_nr = 0; } else { sci->src_clk_nr = temp; } if (of_property_read_u32(dev->of_node, "num-cs", &temp)) { - dev_warn(dev, "number of chip select lines not specified, assuming 1 chip select line\n"); + dev_dbg(dev, "number of chip select lines not specified, assuming 1 chip select line\n"); sci->num_cs = 1; } else { sci->num_cs = temp; @@ -1159,6 +1201,31 @@ static inline const struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config( return (const struct s3c64xx_spi_port_config *)platform_get_device_id(pdev)->driver_data; } +static int s3c64xx_spi_set_port_id(struct platform_device *pdev, + struct s3c64xx_spi_driver_data *sdd) +{ + const struct s3c64xx_spi_port_config *port_conf = sdd->port_conf; + int ret; + + if (port_conf->rx_fifomask && port_conf->tx_fifomask) + return 0; + + if (pdev->dev.of_node) { + ret = of_alias_get_id(pdev->dev.of_node, "spi"); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Failed to get alias id\n"); + sdd->port_id = ret; + } else { + if (pdev->id < 0) + return dev_err_probe(&pdev->dev, -EINVAL, + "Negative platform ID is not allowed\n"); + sdd->port_id = pdev->id; + } + + return 0; +} + static void s3c64xx_spi_set_fifomask(struct s3c64xx_spi_driver_data *sdd) { const struct s3c64xx_spi_port_config *port_conf = sdd->port_conf; @@ -1211,17 +1278,16 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) sdd->host = host; sdd->cntrlr_info = sci; sdd->pdev = pdev; - if (pdev->dev.of_node) { - ret = of_alias_get_id(pdev->dev.of_node, "spi"); - if (ret < 0) - return dev_err_probe(&pdev->dev, ret, - "Failed to get alias id\n"); - sdd->port_id = ret; - } else { - sdd->port_id = pdev->id; - } - sdd->fifo_depth = FIFO_DEPTH(sdd); + ret = s3c64xx_spi_set_port_id(pdev, sdd); + if (ret) + return ret; + + if (sdd->port_conf->fifo_depth) + sdd->fifo_depth = sdd->port_conf->fifo_depth; + else if (of_property_read_u32(pdev->dev.of_node, "fifo-depth", + &sdd->fifo_depth)) + sdd->fifo_depth = FIFO_DEPTH(sdd); s3c64xx_spi_set_fifomask(sdd); @@ -1231,7 +1297,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) sdd->rx_dma.direction = DMA_DEV_TO_MEM; host->dev.of_node = pdev->dev.of_node; - host->bus_num = sdd->port_id; + host->bus_num = -1; host->setup = s3c64xx_spi_setup; host->cleanup = s3c64xx_spi_cleanup; host->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer; @@ -1312,7 +1378,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) } dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Targets attached\n", - sdd->port_id, host->num_chipselect); + host->bus_num, host->num_chipselect); dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\n", mem_res, sdd->fifo_depth); @@ -1353,8 +1419,9 @@ static int s3c64xx_spi_suspend(struct device *dev) { struct spi_controller *host = dev_get_drvdata(dev); struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host); + int ret; - int ret = spi_controller_suspend(host); + ret = spi_controller_suspend(host); if (ret) return ret; @@ -1442,7 +1509,9 @@ static const struct dev_pm_ops s3c64xx_spi_pm = { }; static const struct s3c64xx_spi_port_config s3c2443_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x7f }, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 13, .tx_st_done = 21, .clk_div = 2, @@ -1450,14 +1519,18 @@ static const struct s3c64xx_spi_port_config s3c2443_spi_port_config = { }; static const struct s3c64xx_spi_port_config s3c6410_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x7f, 0x7F }, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 13, .tx_st_done = 21, .clk_div = 2, }; static const struct s3c64xx_spi_port_config s5pv210_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x7F }, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1465,7 +1538,9 @@ static const struct s3c64xx_spi_port_config s5pv210_spi_port_config = { }; static const struct s3c64xx_spi_port_config exynos4_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1475,7 +1550,9 @@ static const struct s3c64xx_spi_port_config exynos4_spi_port_config = { }; static const struct s3c64xx_spi_port_config exynos7_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F, 0x7F, 0x7F, 0x1ff}, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1485,7 +1562,9 @@ static const struct s3c64xx_spi_port_config exynos7_spi_port_config = { }; static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff}, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1495,9 +1574,23 @@ static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = { .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, }; +static const struct s3c64xx_spi_port_config exynos850_spi_port_config = { + .fifo_depth = 64, + .rx_fifomask = S3C64XX_SPI_ST_RX_FIFO_RDY_V2, + .tx_fifomask = S3C64XX_SPI_ST_TX_FIFO_RDY_V2, + .tx_st_done = 25, + .clk_div = 4, + .high_speed = true, + .clk_from_cmu = true, + .has_loopback = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f}, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 4, @@ -1509,7 +1602,9 @@ static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = { }; static const struct s3c64xx_spi_port_config fsd_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f}, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1519,6 +1614,19 @@ static const struct s3c64xx_spi_port_config fsd_spi_port_config = { .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, }; +static const struct s3c64xx_spi_port_config gs101_spi_port_config = { + .fifo_depth = 64, + .rx_fifomask = S3C64XX_SPI_ST_RX_FIFO_RDY_V2, + .tx_fifomask = S3C64XX_SPI_ST_TX_FIFO_RDY_V2, + .tx_st_done = 25, + .clk_div = 4, + .high_speed = true, + .clk_from_cmu = true, + .has_loopback = true, + .use_32bit_io = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + static const struct platform_device_id s3c64xx_spi_driver_ids[] = { { .name = "s3c2443-spi", @@ -1531,29 +1639,35 @@ static const struct platform_device_id s3c64xx_spi_driver_ids[] = { }; static const struct of_device_id s3c64xx_spi_dt_match[] = { + { .compatible = "google,gs101-spi", + .data = &gs101_spi_port_config, + }, { .compatible = "samsung,s3c2443-spi", - .data = (void *)&s3c2443_spi_port_config, + .data = &s3c2443_spi_port_config, }, { .compatible = "samsung,s3c6410-spi", - .data = (void *)&s3c6410_spi_port_config, + .data = &s3c6410_spi_port_config, }, { .compatible = "samsung,s5pv210-spi", - .data = (void *)&s5pv210_spi_port_config, + .data = &s5pv210_spi_port_config, }, { .compatible = "samsung,exynos4210-spi", - .data = (void *)&exynos4_spi_port_config, + .data = &exynos4_spi_port_config, }, { .compatible = "samsung,exynos7-spi", - .data = (void *)&exynos7_spi_port_config, + .data = &exynos7_spi_port_config, }, { .compatible = "samsung,exynos5433-spi", - .data = (void *)&exynos5433_spi_port_config, + .data = &exynos5433_spi_port_config, + }, + { .compatible = "samsung,exynos850-spi", + .data = &exynos850_spi_port_config, }, { .compatible = "samsung,exynosautov9-spi", - .data = (void *)&exynosautov9_spi_port_config, + .data = &exynosautov9_spi_port_config, }, { .compatible = "tesla,fsd-spi", - .data = (void *)&fsd_spi_port_config, + .data = &fsd_spi_port_config, }, { }, }; diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c index 148d615d2f..3d560b154a 100644 --- a/drivers/spi/spi-sh-sci.c +++ b/drivers/spi/spi-sh-sci.c @@ -136,9 +136,9 @@ static int sh_sci_spi_probe(struct platform_device *dev) } /* setup spi bitbang adaptor */ - sp->bitbang.master = host; - sp->bitbang.master->bus_num = sp->info->bus_num; - sp->bitbang.master->num_chipselect = sp->info->num_chipselect; + sp->bitbang.ctlr = host; + sp->bitbang.ctlr->bus_num = sp->info->bus_num; + sp->bitbang.ctlr->num_chipselect = sp->info->num_chipselect; sp->bitbang.chipselect = sh_sci_spi_chipselect; sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0; @@ -166,7 +166,7 @@ static int sh_sci_spi_probe(struct platform_device *dev) setbits(sp, PIN_INIT, 0); iounmap(sp->membase); err1: - spi_controller_put(sp->bitbang.master); + spi_controller_put(sp->bitbang.ctlr); err0: return ret; } @@ -178,7 +178,7 @@ static void sh_sci_spi_remove(struct platform_device *dev) spi_bitbang_stop(&sp->bitbang); setbits(sp, PIN_INIT, 0); iounmap(sp->membase); - spi_controller_put(sp->bitbang.master); + spi_controller_put(sp->bitbang.ctlr); } static struct platform_driver sh_sci_spi_drv = { diff --git a/drivers/spi/spi-slave-mt27xx.c b/drivers/spi/spi-slave-mt27xx.c index 6d67729747..f1ddf4c099 100644 --- a/drivers/spi/spi-slave-mt27xx.c +++ b/drivers/spi/spi-slave-mt27xx.c @@ -297,7 +297,7 @@ static int mtk_spi_slave_transfer_one(struct spi_controller *ctlr, static int mtk_spi_slave_setup(struct spi_device *spi) { - struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->master); + struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->controller); u32 reg_val; reg_val = DMA_DONE_EN | DATA_DONE_EN | diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index 3858320304..955c920c4b 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -8,13 +8,13 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/errno.h> +#include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/iopoll.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/pinctrl/consumer.h> #include <linux/pm_runtime.h> #include <linux/platform_device.h> @@ -349,7 +349,7 @@ static int stm32_qspi_wait_poll_status(struct stm32_qspi *qspi) static int stm32_qspi_get_mode(u8 buswidth) { - if (buswidth == 4) + if (buswidth >= 4) return CCR_BUSWIDTH_4; return buswidth; @@ -653,9 +653,7 @@ static int stm32_qspi_setup(struct spi_device *spi) return -EINVAL; mode = spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL); - if ((mode == SPI_TX_OCTAL || mode == SPI_RX_OCTAL) || - ((mode == (SPI_TX_OCTAL | SPI_RX_OCTAL)) && - gpiod_count(qspi->dev, "cs") == -ENOENT)) { + if (mode && gpiod_count(qspi->dev, "cs") == -ENOENT) { dev_err(qspi->dev, "spi-rx-bus-width\\/spi-tx-bus-width\\/cs-gpios\n"); dev_err(qspi->dev, "configuration not supported\n"); @@ -676,10 +674,10 @@ static int stm32_qspi_setup(struct spi_device *spi) qspi->cr_reg = CR_APMS | 3 << CR_FTHRES_SHIFT | CR_SSHIFT | CR_EN; /* - * Dual flash mode is only enable in case SPI_TX_OCTAL and SPI_TX_OCTAL - * are both set in spi->mode and "cs-gpios" properties is found in DT + * Dual flash mode is only enable in case SPI_TX_OCTAL or SPI_RX_OCTAL + * is set in spi->mode and "cs-gpios" properties is found in DT */ - if (mode == (SPI_TX_OCTAL | SPI_RX_OCTAL)) { + if (mode) { qspi->cr_reg |= CR_DFM; dev_dbg(qspi->dev, "Dual flash mode enable"); } diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index e61302ef3c..4c4ff074e3 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1057,7 +1057,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) mask |= STM32H7_SPI_SR_TXP | STM32H7_SPI_SR_RXP; if (!(sr & mask)) { - dev_warn(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n", + dev_vdbg(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n", sr, ier); spin_unlock_irqrestore(&spi->lock, flags); return IRQ_NONE; @@ -1118,6 +1118,21 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) return IRQ_HANDLED; } +static int stm32_spi_optimize_message(struct spi_message *msg) +{ + struct spi_controller *ctrl = msg->spi->controller; + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); + + /* On STM32H7, messages should not exceed a maximum size set + * later via the set_number_of_data function. In order to + * ensure that, split large messages into several messages + */ + if (spi->cfg->set_number_of_data) + return spi_split_transfers_maxwords(ctrl, msg, spi->t_size_max); + + return 0; +} + /** * stm32_spi_prepare_msg - set up the controller to transfer a single message * @ctrl: controller interface @@ -1163,20 +1178,6 @@ static int stm32_spi_prepare_msg(struct spi_controller *ctrl, !!(spi_dev->mode & SPI_LSB_FIRST), !!(spi_dev->mode & SPI_CS_HIGH)); - /* On STM32H7, messages should not exceed a maximum size setted - * afterward via the set_number_of_data function. In order to - * ensure that, split large messages into several messages - */ - if (spi->cfg->set_number_of_data) { - int ret; - - ret = spi_split_transfers_maxwords(ctrl, msg, - spi->t_size_max, - GFP_KERNEL | GFP_DMA); - if (ret) - return ret; - } - spin_lock_irqsave(&spi->lock, flags); /* CPOL, CPHA and LSB FIRST bits have common register */ @@ -2182,6 +2183,7 @@ static int stm32_spi_probe(struct platform_device *pdev) ctrl->max_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_min; ctrl->min_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_max; ctrl->use_gpio_descriptors = true; + ctrl->optimize_message = stm32_spi_optimize_message; ctrl->prepare_message = stm32_spi_prepare_msg; ctrl->transfer_one = stm32_spi_transfer_one; ctrl->unprepare_message = stm32_spi_unprepare_msg; diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index 12355957be..7795328427 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -434,7 +434,7 @@ static int xilinx_spi_probe(struct platform_device *pdev) xspi = spi_controller_get_devdata(host); xspi->cs_inactive = 0xffffffff; - xspi->bitbang.master = host; + xspi->bitbang.ctlr = host; xspi->bitbang.chipselect = xilinx_spi_chipselect; xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer; xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs; @@ -516,7 +516,7 @@ static void xilinx_spi_remove(struct platform_device *pdev) /* Disable the global IPIF interrupt */ xspi->write_fn(0, regs_base + XIPIF_V123B_DGIER_OFFSET); - spi_controller_put(xspi->bitbang.master); + spi_controller_put(xspi->bitbang.ctlr); } /* work with hotplug and coldplug */ diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c index 3c77218943..3c2cda3153 100644 --- a/drivers/spi/spi-xtensa-xtfpga.c +++ b/drivers/spi/spi-xtensa-xtfpga.c @@ -93,7 +93,7 @@ static int xtfpga_spi_probe(struct platform_device *pdev) host->dev.of_node = pdev->dev.of_node; xspi = spi_controller_get_devdata(host); - xspi->bitbang.master = host; + xspi->bitbang.ctlr = host; xspi->bitbang.chipselect = xtfpga_spi_chipselect; xspi->bitbang.txrx_word[SPI_MODE_0] = xtfpga_spi_txrx_word; xspi->regs = devm_platform_ioremap_resource(pdev, 0); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index a7194f29c2..c349d60126 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -459,7 +459,7 @@ static void spi_shutdown(struct device *dev) } } -struct bus_type spi_bus_type = { +const struct bus_type spi_bus_type = { .name = "spi", .dev_groups = spi_dev_groups, .match = spi_match_device, @@ -584,7 +584,7 @@ struct spi_device *spi_alloc_device(struct spi_controller *ctlr) return NULL; } - spi->master = spi->controller = ctlr; + spi->controller = ctlr; spi->dev.parent = &ctlr->dev; spi->dev.bus = &spi_bus_type; spi->dev.release = spidev_release; @@ -608,23 +608,51 @@ static void spi_dev_set_name(struct spi_device *spi) spi_get_chipselect(spi, 0)); } +/* + * Zero(0) is a valid physical CS value and can be located at any + * logical CS in the spi->chip_select[]. If all the physical CS + * are initialized to 0 then It would be difficult to differentiate + * between a valid physical CS 0 & an unused logical CS whose physical + * CS can be 0. As a solution to this issue initialize all the CS to -1. + * Now all the unused logical CS will have -1 physical CS value & can be + * ignored while performing physical CS validity checks. + */ +#define SPI_INVALID_CS ((s8)-1) + +static inline bool is_valid_cs(s8 chip_select) +{ + return chip_select != SPI_INVALID_CS; +} + +static inline int spi_dev_check_cs(struct device *dev, + struct spi_device *spi, u8 idx, + struct spi_device *new_spi, u8 new_idx) +{ + u8 cs, cs_new; + u8 idx_new; + + cs = spi_get_chipselect(spi, idx); + for (idx_new = new_idx; idx_new < SPI_CS_CNT_MAX; idx_new++) { + cs_new = spi_get_chipselect(new_spi, idx_new); + if (is_valid_cs(cs) && is_valid_cs(cs_new) && cs == cs_new) { + dev_err(dev, "chipselect %u already in use\n", cs_new); + return -EBUSY; + } + } + return 0; +} + static int spi_dev_check(struct device *dev, void *data) { struct spi_device *spi = to_spi_device(dev); struct spi_device *new_spi = data; - int idx, nw_idx; - u8 cs, cs_nw; + int status, idx; if (spi->controller == new_spi->controller) { for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { - cs = spi_get_chipselect(spi, idx); - for (nw_idx = 0; nw_idx < SPI_CS_CNT_MAX; nw_idx++) { - cs_nw = spi_get_chipselect(new_spi, nw_idx); - if (cs != 0xFF && cs_nw != 0xFF && cs == cs_nw) { - dev_err(dev, "chipselect %d already in use\n", cs_nw); - return -EBUSY; - } - } + status = spi_dev_check_cs(dev, spi, idx, new_spi, 0); + if (status) + return status; } } return 0; @@ -640,13 +668,13 @@ static int __spi_add_device(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; - int status, idx, nw_idx; - u8 cs, nw_cs; + int status, idx; + u8 cs; for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { /* Chipselects are numbered 0..max; validate. */ cs = spi_get_chipselect(spi, idx); - if (cs != 0xFF && cs >= ctlr->num_chipselect) { + if (is_valid_cs(cs) && cs >= ctlr->num_chipselect) { dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, idx), ctlr->num_chipselect); return -EINVAL; @@ -657,14 +685,11 @@ static int __spi_add_device(struct spi_device *spi) * Make sure that multiple logical CS doesn't map to the same physical CS. * For example, spi->chip_select[0] != spi->chip_select[1] and so on. */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { - cs = spi_get_chipselect(spi, idx); - for (nw_idx = idx + 1; nw_idx < SPI_CS_CNT_MAX; nw_idx++) { - nw_cs = spi_get_chipselect(spi, nw_idx); - if (cs != 0xFF && nw_cs != 0xFF && cs == nw_cs) { - dev_err(dev, "chipselect %d already in use\n", nw_cs); - return -EBUSY; - } + if (!spi_controller_is_target(ctlr)) { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + status = spi_dev_check_cs(dev, spi, idx, spi, idx + 1); + if (status) + return status; } } @@ -691,7 +716,7 @@ static int __spi_add_device(struct spi_device *spi) for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { cs = spi_get_chipselect(spi, idx); - if (cs != 0xFF) + if (is_valid_cs(cs)) spi_set_csgpiod(spi, idx, ctlr->cs_gpiods[cs]); } } @@ -745,6 +770,14 @@ int spi_add_device(struct spi_device *spi) } EXPORT_SYMBOL_GPL(spi_add_device); +static void spi_set_all_cs_unused(struct spi_device *spi) +{ + u8 idx; + + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) + spi_set_chipselect(spi, idx, SPI_INVALID_CS); +} + /** * spi_new_device - instantiate one new SPI device * @ctlr: Controller to which device is connected @@ -764,7 +797,6 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr, { struct spi_device *proxy; int status; - u8 idx; /* * NOTE: caller did any chip->bus_num checks necessary. @@ -780,19 +812,10 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr, WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias)); - /* - * Zero(0) is a valid physical CS value and can be located at any - * logical CS in the spi->chip_select[]. If all the physical CS - * are initialized to 0 then It would be difficult to differentiate - * between a valid physical CS 0 & an unused logical CS whose physical - * CS can be 0. As a solution to this issue initialize all the CS to 0xFF. - * Now all the unused logical CS will have 0xFF physical CS value & can be - * ignore while performing physical CS validity checks. - */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi_set_chipselect(proxy, idx, 0xFF); - + /* Use provided chip-select for proxy device */ + spi_set_all_cs_unused(proxy); spi_set_chipselect(proxy, 0, chip->chip_select); + proxy->max_speed_hz = chip->max_speed_hz; proxy->mode = chip->mode; proxy->irq = chip->irq; @@ -1007,7 +1030,7 @@ static inline bool spi_is_last_cs(struct spi_device *spi) bool last = false; for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { - if ((spi->cs_index_mask >> idx) & 0x01) { + if (spi->cs_index_mask & BIT(idx)) { if (spi->controller->last_cs[idx] == spi_get_chipselect(spi, idx)) last = true; } @@ -1036,7 +1059,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) spi->controller->last_cs_index_mask = spi->cs_index_mask; for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi->controller->last_cs[idx] = enable ? spi_get_chipselect(spi, 0) : -1; + spi->controller->last_cs[idx] = enable ? spi_get_chipselect(spi, 0) : SPI_INVALID_CS; spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; if (spi->mode & SPI_CS_HIGH) @@ -1062,8 +1085,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) * into account. */ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { - if (((spi->cs_index_mask >> idx) & 0x01) && - spi_get_csgpiod(spi, idx)) { + if ((spi->cs_index_mask & BIT(idx)) && spi_get_csgpiod(spi, idx)) { if (has_acpi_companion(&spi->dev)) gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), !enable); @@ -1222,6 +1244,7 @@ static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg) else rx_dev = ctlr->dev.parent; + ret = -ENOMSG; list_for_each_entry(xfer, &msg->transfers, transfer_list) { /* The sync is done before each transfer. */ unsigned long attrs = DMA_ATTR_SKIP_CPU_SYNC; @@ -1251,6 +1274,9 @@ static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg) } } } + /* No transfer has been mapped, bail out with success */ + if (ret) + return 0; ctlr->cur_rx_dma_dev = rx_dev; ctlr->cur_tx_dma_dev = tx_dev; @@ -1751,39 +1777,6 @@ static int __spi_pump_transfer_message(struct spi_controller *ctlr, trace_spi_message_start(msg); - /* - * If an SPI controller does not support toggling the CS line on each - * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO - * for the CS line, we can emulate the CS-per-word hardware function by - * splitting transfers into one-word transfers and ensuring that - * cs_change is set for each transfer. - */ - if ((msg->spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) || - spi_is_csgpiod(msg->spi))) { - ret = spi_split_transfers_maxwords(ctlr, msg, 1, GFP_KERNEL); - if (ret) { - msg->status = ret; - spi_finalize_current_message(ctlr); - return ret; - } - - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - /* Don't change cs_change on the last entry in the list */ - if (list_is_last(&xfer->transfer_list, &msg->transfers)) - break; - xfer->cs_change = 1; - } - } else { - ret = spi_split_transfers_maxsize(ctlr, msg, - spi_max_transfer_size(msg->spi), - GFP_KERNEL | GFP_DMA); - if (ret) { - msg->status = ret; - spi_finalize_current_message(ctlr); - return ret; - } - } - if (ctlr->prepare_message) { ret = ctlr->prepare_message(ctlr, msg); if (ret) { @@ -2111,6 +2104,43 @@ struct spi_message *spi_get_next_queued_message(struct spi_controller *ctlr) } EXPORT_SYMBOL_GPL(spi_get_next_queued_message); +/* + * __spi_unoptimize_message - shared implementation of spi_unoptimize_message() + * and spi_maybe_unoptimize_message() + * @msg: the message to unoptimize + * + * Peripheral drivers should use spi_unoptimize_message() and callers inside + * core should use spi_maybe_unoptimize_message() rather than calling this + * function directly. + * + * It is not valid to call this on a message that is not currently optimized. + */ +static void __spi_unoptimize_message(struct spi_message *msg) +{ + struct spi_controller *ctlr = msg->spi->controller; + + if (ctlr->unoptimize_message) + ctlr->unoptimize_message(msg); + + spi_res_release(ctlr, msg); + + msg->optimized = false; + msg->opt_state = NULL; +} + +/* + * spi_maybe_unoptimize_message - unoptimize msg not managed by a peripheral + * @msg: the message to unoptimize + * + * This function is used to unoptimize a message if and only if it was + * optimized by the core (via spi_maybe_optimize_message()). + */ +static void spi_maybe_unoptimize_message(struct spi_message *msg) +{ + if (!msg->pre_optimized && msg->optimized) + __spi_unoptimize_message(msg); +} + /** * spi_finalize_current_message() - the current message is complete * @ctlr: the controller to return the message to @@ -2139,15 +2169,6 @@ void spi_finalize_current_message(struct spi_controller *ctlr) spi_unmap_msg(ctlr, mesg); - /* - * In the prepare_messages callback the SPI bus has the opportunity - * to split a transfer to smaller chunks. - * - * Release the split transfers here since spi_map_msg() is done on - * the split transfers. - */ - spi_res_release(ctlr, mesg); - if (mesg->prepared && ctlr->unprepare_message) { ret = ctlr->unprepare_message(ctlr, mesg); if (ret) { @@ -2158,6 +2179,8 @@ void spi_finalize_current_message(struct spi_controller *ctlr) mesg->prepared = false; + spi_maybe_unoptimize_message(mesg); + WRITE_ONCE(ctlr->cur_msg_incomplete, false); smp_mb(); /* See __spi_pump_transfer_message()... */ if (READ_ONCE(ctlr->cur_msg_need_completion)) @@ -2425,17 +2448,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, return -EINVAL; } - /* - * Zero(0) is a valid physical CS value and can be located at any - * logical CS in the spi->chip_select[]. If all the physical CS - * are initialized to 0 then It would be difficult to differentiate - * between a valid physical CS 0 & an unused logical CS whose physical - * CS can be 0. As a solution to this issue initialize all the CS to 0xFF. - * Now all the unused logical CS will have 0xFF physical CS value & can be - * ignore while performing physical CS validity checks. - */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi_set_chipselect(spi, idx, 0xFF); + spi_set_all_cs_unused(spi); /* Device address */ rc = of_property_read_variable_u32_array(nc, "reg", &cs[0], 1, @@ -2459,14 +2472,10 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, spi_set_chipselect(spi, idx, cs[idx]); /* - * spi->chip_select[i] gives the corresponding physical CS for logical CS i - * logical CS number is represented by setting the ith bit in spi->cs_index_mask - * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and - * spi->chip_select[0] will give the physical CS. - * By default spi->chip_select[0] will hold the physical CS number so, set - * spi->cs_index_mask as 0x01. + * By default spi->chip_select[0] will hold the physical CS number, + * so set bit 0 in spi->cs_index_mask. */ - spi->cs_index_mask = 0x01; + spi->cs_index_mask = BIT(0); /* Device speed */ if (!of_property_read_u32(nc, "spi-max-frequency", &value)) @@ -2572,7 +2581,6 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi, struct spi_controller *ctlr = spi->controller; struct spi_device *ancillary; int rc = 0; - u8 idx; /* Alloc an spi_device */ ancillary = spi_alloc_device(ctlr); @@ -2583,33 +2591,18 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi, strscpy(ancillary->modalias, "dummy", sizeof(ancillary->modalias)); - /* - * Zero(0) is a valid physical CS value and can be located at any - * logical CS in the spi->chip_select[]. If all the physical CS - * are initialized to 0 then It would be difficult to differentiate - * between a valid physical CS 0 & an unused logical CS whose physical - * CS can be 0. As a solution to this issue initialize all the CS to 0xFF. - * Now all the unused logical CS will have 0xFF physical CS value & can be - * ignore while performing physical CS validity checks. - */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi_set_chipselect(ancillary, idx, 0xFF); - /* Use provided chip-select for ancillary device */ + spi_set_all_cs_unused(ancillary); spi_set_chipselect(ancillary, 0, chip_select); /* Take over SPI mode/speed from SPI main device */ ancillary->max_speed_hz = spi->max_speed_hz; ancillary->mode = spi->mode; /* - * spi->chip_select[i] gives the corresponding physical CS for logical CS i - * logical CS number is represented by setting the ith bit in spi->cs_index_mask - * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and - * spi->chip_select[0] will give the physical CS. - * By default spi->chip_select[0] will hold the physical CS number so, set - * spi->cs_index_mask as 0x01. + * By default spi->chip_select[0] will hold the physical CS number, + * so set bit 0 in spi->cs_index_mask. */ - ancillary->cs_index_mask = 0x01; + ancillary->cs_index_mask = BIT(0); WARN_ON(!mutex_is_locked(&ctlr->add_lock)); @@ -2812,7 +2805,6 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr, struct acpi_spi_lookup lookup = {}; struct spi_device *spi; int ret; - u8 idx; if (!ctlr && index == -1) return ERR_PTR(-EINVAL); @@ -2848,33 +2840,19 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr, return ERR_PTR(-ENOMEM); } - /* - * Zero(0) is a valid physical CS value and can be located at any - * logical CS in the spi->chip_select[]. If all the physical CS - * are initialized to 0 then It would be difficult to differentiate - * between a valid physical CS 0 & an unused logical CS whose physical - * CS can be 0. As a solution to this issue initialize all the CS to 0xFF. - * Now all the unused logical CS will have 0xFF physical CS value & can be - * ignore while performing physical CS validity checks. - */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi_set_chipselect(spi, idx, 0xFF); + spi_set_all_cs_unused(spi); + spi_set_chipselect(spi, 0, lookup.chip_select); ACPI_COMPANION_SET(&spi->dev, adev); spi->max_speed_hz = lookup.max_speed_hz; spi->mode |= lookup.mode; spi->irq = lookup.irq; spi->bits_per_word = lookup.bits_per_word; - spi_set_chipselect(spi, 0, lookup.chip_select); /* - * spi->chip_select[i] gives the corresponding physical CS for logical CS i - * logical CS number is represented by setting the ith bit in spi->cs_index_mask - * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and - * spi->chip_select[0] will give the physical CS. - * By default spi->chip_select[0] will hold the physical CS number so, set - * spi->cs_index_mask as 0x01. + * By default spi->chip_select[0] will hold the physical CS number, + * so set bit 0 in spi->cs_index_mask. */ - spi->cs_index_mask = 0x01; + spi->cs_index_mask = BIT(0); return spi; } @@ -3372,9 +3350,9 @@ int spi_register_controller(struct spi_controller *ctlr) goto free_bus_id; } - /* Setting last_cs to -1 means no chip selected */ + /* Setting last_cs to SPI_INVALID_CS means no chip selected */ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - ctlr->last_cs[idx] = -1; + ctlr->last_cs[idx] = SPI_INVALID_CS; status = device_add(&ctlr->dev); if (status < 0) @@ -3715,8 +3693,7 @@ static struct spi_replaced_transfers *spi_replace_transfers( static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, struct spi_message *msg, struct spi_transfer **xferp, - size_t maxsize, - gfp_t gfp) + size_t maxsize) { struct spi_transfer *xfer = *xferp, *xfers; struct spi_replaced_transfers *srt; @@ -3727,7 +3704,7 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, count = DIV_ROUND_UP(xfer->len, maxsize); /* Create replacement */ - srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp); + srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, GFP_KERNEL); if (IS_ERR(srt)) return PTR_ERR(srt); xfers = srt->inserted_transfers; @@ -3787,14 +3764,16 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, * @ctlr: the @spi_controller for this transfer * @msg: the @spi_message to transform * @maxsize: the maximum when to apply this - * @gfp: GFP allocation flags + * + * This function allocates resources that are automatically freed during the + * spi message unoptimize phase so this function should only be called from + * optimize_message callbacks. * * Return: status of transformation */ int spi_split_transfers_maxsize(struct spi_controller *ctlr, struct spi_message *msg, - size_t maxsize, - gfp_t gfp) + size_t maxsize) { struct spi_transfer *xfer; int ret; @@ -3809,7 +3788,7 @@ int spi_split_transfers_maxsize(struct spi_controller *ctlr, list_for_each_entry(xfer, &msg->transfers, transfer_list) { if (xfer->len > maxsize) { ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer, - maxsize, gfp); + maxsize); if (ret) return ret; } @@ -3827,14 +3806,16 @@ EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize); * @ctlr: the @spi_controller for this transfer * @msg: the @spi_message to transform * @maxwords: the number of words to limit each transfer to - * @gfp: GFP allocation flags + * + * This function allocates resources that are automatically freed during the + * spi message unoptimize phase so this function should only be called from + * optimize_message callbacks. * * Return: status of transformation */ int spi_split_transfers_maxwords(struct spi_controller *ctlr, struct spi_message *msg, - size_t maxwords, - gfp_t gfp) + size_t maxwords) { struct spi_transfer *xfer; @@ -3852,7 +3833,7 @@ int spi_split_transfers_maxwords(struct spi_controller *ctlr, maxsize = maxwords * roundup_pow_of_two(BITS_TO_BYTES(xfer->bits_per_word)); if (xfer->len > maxsize) { ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer, - maxsize, gfp); + maxsize); if (ret) return ret; } @@ -4204,6 +4185,167 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) return 0; } +/* + * spi_split_transfers - generic handling of transfer splitting + * @msg: the message to split + * + * Under certain conditions, a SPI controller may not support arbitrary + * transfer sizes or other features required by a peripheral. This function + * will split the transfers in the message into smaller transfers that are + * supported by the controller. + * + * Controllers with special requirements not covered here can also split + * transfers in the optimize_message() callback. + * + * Context: can sleep + * Return: zero on success, else a negative error code + */ +static int spi_split_transfers(struct spi_message *msg) +{ + struct spi_controller *ctlr = msg->spi->controller; + struct spi_transfer *xfer; + int ret; + + /* + * If an SPI controller does not support toggling the CS line on each + * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO + * for the CS line, we can emulate the CS-per-word hardware function by + * splitting transfers into one-word transfers and ensuring that + * cs_change is set for each transfer. + */ + if ((msg->spi->mode & SPI_CS_WORD) && + (!(ctlr->mode_bits & SPI_CS_WORD) || spi_is_csgpiod(msg->spi))) { + ret = spi_split_transfers_maxwords(ctlr, msg, 1); + if (ret) + return ret; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + /* Don't change cs_change on the last entry in the list */ + if (list_is_last(&xfer->transfer_list, &msg->transfers)) + break; + + xfer->cs_change = 1; + } + } else { + ret = spi_split_transfers_maxsize(ctlr, msg, + spi_max_transfer_size(msg->spi)); + if (ret) + return ret; + } + + return 0; +} + +/* + * __spi_optimize_message - shared implementation for spi_optimize_message() + * and spi_maybe_optimize_message() + * @spi: the device that will be used for the message + * @msg: the message to optimize + * + * Peripheral drivers will call spi_optimize_message() and the spi core will + * call spi_maybe_optimize_message() instead of calling this directly. + * + * It is not valid to call this on a message that has already been optimized. + * + * Return: zero on success, else a negative error code + */ +static int __spi_optimize_message(struct spi_device *spi, + struct spi_message *msg) +{ + struct spi_controller *ctlr = spi->controller; + int ret; + + ret = __spi_validate(spi, msg); + if (ret) + return ret; + + ret = spi_split_transfers(msg); + if (ret) + return ret; + + if (ctlr->optimize_message) { + ret = ctlr->optimize_message(msg); + if (ret) { + spi_res_release(ctlr, msg); + return ret; + } + } + + msg->optimized = true; + + return 0; +} + +/* + * spi_maybe_optimize_message - optimize message if it isn't already pre-optimized + * @spi: the device that will be used for the message + * @msg: the message to optimize + * Return: zero on success, else a negative error code + */ +static int spi_maybe_optimize_message(struct spi_device *spi, + struct spi_message *msg) +{ + if (msg->pre_optimized) + return 0; + + return __spi_optimize_message(spi, msg); +} + +/** + * spi_optimize_message - do any one-time validation and setup for a SPI message + * @spi: the device that will be used for the message + * @msg: the message to optimize + * + * Peripheral drivers that reuse the same message repeatedly may call this to + * perform as much message prep as possible once, rather than repeating it each + * time a message transfer is performed to improve throughput and reduce CPU + * usage. + * + * Once a message has been optimized, it cannot be modified with the exception + * of updating the contents of any xfer->tx_buf (the pointer can't be changed, + * only the data in the memory it points to). + * + * Calls to this function must be balanced with calls to spi_unoptimize_message() + * to avoid leaking resources. + * + * Context: can sleep + * Return: zero on success, else a negative error code + */ +int spi_optimize_message(struct spi_device *spi, struct spi_message *msg) +{ + int ret; + + ret = __spi_optimize_message(spi, msg); + if (ret) + return ret; + + /* + * This flag indicates that the peripheral driver called spi_optimize_message() + * and therefore we shouldn't unoptimize message automatically when finalizing + * the message but rather wait until spi_unoptimize_message() is called + * by the peripheral driver. + */ + msg->pre_optimized = true; + + return 0; +} +EXPORT_SYMBOL_GPL(spi_optimize_message); + +/** + * spi_unoptimize_message - releases any resources allocated by spi_optimize_message() + * @msg: the message to unoptimize + * + * Calls to this function must be balanced with calls to spi_optimize_message(). + * + * Context: can sleep + */ +void spi_unoptimize_message(struct spi_message *msg) +{ + __spi_unoptimize_message(msg); + msg->pre_optimized = false; +} +EXPORT_SYMBOL_GPL(spi_unoptimize_message); + static int __spi_async(struct spi_device *spi, struct spi_message *message) { struct spi_controller *ctlr = spi->controller; @@ -4268,8 +4410,8 @@ int spi_async(struct spi_device *spi, struct spi_message *message) int ret; unsigned long flags; - ret = __spi_validate(spi, message); - if (ret != 0) + ret = spi_maybe_optimize_message(spi, message); + if (ret) return ret; spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags); @@ -4281,60 +4423,11 @@ int spi_async(struct spi_device *spi, struct spi_message *message) spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(spi_async); - -/** - * spi_async_locked - version of spi_async with exclusive bus usage - * @spi: device with which data will be exchanged - * @message: describes the data transfers, including completion callback - * Context: any (IRQs may be blocked, etc) - * - * This call may be used in_irq and other contexts which can't sleep, - * as well as from task contexts which can sleep. - * - * The completion callback is invoked in a context which can't sleep. - * Before that invocation, the value of message->status is undefined. - * When the callback is issued, message->status holds either zero (to - * indicate complete success) or a negative error code. After that - * callback returns, the driver which issued the transfer request may - * deallocate the associated memory; it's no longer in use by any SPI - * core or controller driver code. - * - * Note that although all messages to a spi_device are handled in - * FIFO order, messages may go to different devices in other orders. - * Some device might be higher priority, or have various "hard" access - * time requirements, for example. - * - * On detection of any fault during the transfer, processing of - * the entire message is aborted, and the device is deselected. - * Until returning from the associated message completion callback, - * no other spi_message queued to that device will be processed. - * (This rule applies equally to all the synchronous transfer calls, - * which are wrappers around this core asynchronous primitive.) - * - * Return: zero on success, else a negative error code. - */ -static int spi_async_locked(struct spi_device *spi, struct spi_message *message) -{ - struct spi_controller *ctlr = spi->controller; - int ret; - unsigned long flags; - - ret = __spi_validate(spi, message); - if (ret != 0) - return ret; - - spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags); - - ret = __spi_async(spi, message); - - spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags); + spi_maybe_unoptimize_message(message); return ret; - } +EXPORT_SYMBOL_GPL(spi_async); static void __spi_transfer_message_noqueue(struct spi_controller *ctlr, struct spi_message *msg) { @@ -4383,6 +4476,7 @@ static void spi_complete(void *arg) static int __spi_sync(struct spi_device *spi, struct spi_message *message) { DECLARE_COMPLETION_ONSTACK(done); + unsigned long flags; int status; struct spi_controller *ctlr = spi->controller; @@ -4391,8 +4485,8 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message) return -ESHUTDOWN; } - status = __spi_validate(spi, message); - if (status != 0) + status = spi_maybe_optimize_message(spi, message); + if (status) return status; SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_sync); @@ -4426,7 +4520,11 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message) */ message->complete = spi_complete; message->context = &done; - status = spi_async_locked(spi, message); + + spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags); + status = __spi_async(spi, message); + spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags); + if (status == 0) { wait_for_completion(&done); status = message->status; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 655f2c959c..95fb5f1c91 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -802,7 +802,7 @@ static int spidev_probe(struct spi_device *spi) spidev->devt = MKDEV(SPIDEV_MAJOR, minor); dev = device_create(&spidev_class, &spi->dev, spidev->devt, spidev, "spidev%d.%d", - spi->master->bus_num, spi_get_chipselect(spi, 0)); + spi->controller->bus_num, spi_get_chipselect(spi, 0)); status = PTR_ERR_OR_ZERO(dev); } else { dev_dbg(&spi->dev, "no minor number available!\n"); |