Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 239 insertions, 0 deletions

diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
new file mode 100644
index 0000000000..7fd83e806a
--- /dev/null
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * EHCI HCD (Host Controller Driver) for USB.
+ *
+ * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus
+ * Tested on AMCC PPC 440EPx
+ *
+ * Valentine Barshak <vbarshak@ru.mvista.com>
+ *
+ * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
+ * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/err.h>
+#include <linux/signal.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+
+static const struct hc_driver ehci_ppc_of_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "OF EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_setup,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+
+/*
+ * 440EPx Errata USBH_3
+ * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
+ */
+#define PPC440EPX_EHCI0_INSREG_BMT	(0x1 << 0)
+static int
+ppc44x_enable_bmt(struct device_node *dn)
+{
+	__iomem u32 *insreg_virt;
+
+	insreg_virt = of_iomap(dn, 1);
+	if (!insreg_virt)
+		return  -EINVAL;
+
+	out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT);
+
+	iounmap(insreg_virt);
+	return 0;
+}
+
+
+static int ehci_hcd_ppc_of_probe(struct platform_device *op)
+{
+	struct device_node *dn = op->dev.of_node;
+	struct usb_hcd *hcd;
+	struct ehci_hcd	*ehci = NULL;
+	struct resource res;
+	int irq;
+	int rv;
+
+	struct device_node *np;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
+
+	rv = of_address_to_resource(dn, 0, &res);
+	if (rv)
+		return rv;
+
+	hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = res.start;
+	hcd->rsrc_len = resource_size(&res);
+
+	irq = irq_of_parse_and_map(dn, 0);
+	if (!irq) {
+		dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
+			__FILE__);
+		rv = -EBUSY;
+		goto err_irq;
+	}
+
+	hcd->regs = devm_ioremap_resource(&op->dev, &res);
+	if (IS_ERR(hcd->regs)) {
+		rv = PTR_ERR(hcd->regs);
+		goto err_ioremap;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
+	if (np != NULL) {
+		/* claim we really affected by usb23 erratum */
+		if (!of_address_to_resource(np, 0, &res))
+			ehci->ohci_hcctrl_reg =
+				devm_ioremap(&op->dev,
+					     res.start + OHCI_HCCTRL_OFFSET,
+					     OHCI_HCCTRL_LEN);
+		else
+			pr_debug("%s: no ohci offset in fdt\n", __FILE__);
+		if (!ehci->ohci_hcctrl_reg) {
+			pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__);
+		} else {
+			ehci->has_amcc_usb23 = 1;
+		}
+		of_node_put(np);
+	}
+
+	if (of_property_read_bool(dn, "big-endian")) {
+		ehci->big_endian_mmio = 1;
+		ehci->big_endian_desc = 1;
+	}
+	if (of_property_read_bool(dn, "big-endian-regs"))
+		ehci->big_endian_mmio = 1;
+	if (of_property_read_bool(dn, "big-endian-desc"))
+		ehci->big_endian_desc = 1;
+
+	ehci->caps = hcd->regs;
+
+	if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) {
+		rv = ppc44x_enable_bmt(dn);
+		ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n",
+				rv ? "NOT ": "");
+	}
+
+	rv = usb_add_hcd(hcd, irq, 0);
+	if (rv)
+		goto err_ioremap;
+
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+
+err_ioremap:
+	irq_dispose_mapping(irq);
+err_irq:
+	usb_put_hcd(hcd);
+
+	return rv;
+}
+
+
+static void ehci_hcd_ppc_of_remove(struct platform_device *op)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(op);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	struct device_node *np;
+	struct resource res;
+
+	dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
+
+	usb_remove_hcd(hcd);
+
+	irq_dispose_mapping(hcd->irq);
+
+	/* use request_mem_region to test if the ohci driver is loaded.  if so
+	 * ensure the ohci core is operational.
+	 */
+	if (ehci->has_amcc_usb23) {
+		np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
+		if (np != NULL) {
+			if (!of_address_to_resource(np, 0, &res))
+				if (!request_mem_region(res.start,
+							    0x4, hcd_name))
+					set_ohci_hcfs(ehci, 1);
+				else
+					release_mem_region(res.start, 0x4);
+			else
+				pr_debug("%s: no ohci offset in fdt\n", __FILE__);
+			of_node_put(np);
+		}
+	}
+	usb_put_hcd(hcd);
+}
+
+
+static const struct of_device_id ehci_hcd_ppc_of_match[] = {
+	{
+		.compatible = "usb-ehci",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match);
+
+
+static struct platform_driver ehci_hcd_ppc_of_driver = {
+	.probe		= ehci_hcd_ppc_of_probe,
+	.remove_new	= ehci_hcd_ppc_of_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "ppc-of-ehci",
+		.of_match_table = ehci_hcd_ppc_of_match,
+	},
+};