diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/usb/typec | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/typec')
68 files changed, 33101 insertions, 0 deletions
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig new file mode 100644 index 0000000000..2f80c2792d --- /dev/null +++ b/drivers/usb/typec/Kconfig @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0 + +menuconfig TYPEC + tristate "USB Type-C Support" + help + USB Type-C Specification defines a cable and connector for USB where + only one type of plug is supported on both ends, i.e. there will not + be Type-A plug on one end of the cable and Type-B plug on the other. + Determination of the host-to-device relationship happens through a + specific Configuration Channel (CC) which goes through the USB Type-C + cable. The Configuration Channel may also be used to detect optional + Accessory Modes - Analog Audio and Debug - and if USB Power Delivery + is supported, the Alternate Modes, where the connector is used for + something else then USB communication. + + USB Power Delivery Specification defines a protocol that can be used + to negotiate the voltage and current levels with the connected + partners. USB Power Delivery allows higher voltages then the normal + 5V, up to 20V, and current up to 5A over the cable. The USB Power + Delivery protocol is also used to negotiate the optional Alternate + Modes when they are supported. USB Power Delivery does not depend on + USB Type-C connector, however it is mostly used together with USB + Type-C connectors. + + USB Type-C and USB Power Delivery Specifications define a set of state + machines that need to be implemented in either software or firmware. + Simple USB Type-C PHYs, for example USB Type-C Port Controller + Interface Specification compliant "Port Controllers" need the state + machines to be handled in the OS, but stand-alone USB Type-C and Power + Delivery controllers handle the state machines inside their firmware. + The USB Type-C and Power Delivery controllers usually function + autonomously, and do not necessarily require drivers. + + Enable this configurations option if you have USB Type-C connectors on + your system and 1) you know your USB Type-C hardware requires OS + control (a driver) to function, or 2) if you need to be able to read + the status of the USB Type-C ports in your system, or 3) if you need + to be able to swap the power role (decide are you supplying or + consuming power over the cable) or data role (host or device) when + both roles are supported. + + For more information, see the kernel documentation for USB Type-C + Connector Class API (Documentation/driver-api/usb/typec.rst) + <https://www.kernel.org/doc/html/latest/driver-api/usb/typec.html> + and ABI (Documentation/ABI/testing/sysfs-class-typec). + +if TYPEC + +source "drivers/usb/typec/tcpm/Kconfig" + +source "drivers/usb/typec/ucsi/Kconfig" + +source "drivers/usb/typec/tipd/Kconfig" + +config TYPEC_ANX7411 + tristate "Analogix ANX7411 Type-C DRP Port controller driver" + depends on I2C + depends on USB_ROLE_SWITCH + depends on POWER_SUPPLY + help + Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port + controller driver. + + If you choose to build this driver as a dynamically linked module, the + module will be called anx7411.ko. + +config TYPEC_RT1719 + tristate "Richtek RT1719 Sink Only Type-C controller driver" + depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH + depends on I2C + depends on POWER_SUPPLY + select REGMAP_I2C + help + Say Y or M here if your system has Richtek RT1719 sink only + Type-C port controller driver. + + If you choose to build this driver as a dynamically linked module, the + module will be called rt1719.ko + +config TYPEC_HD3SS3220 + tristate "TI HD3SS3220 Type-C DRP Port controller driver" + depends on I2C + depends on USB_ROLE_SWITCH + help + Say Y or M here if your system has TI HD3SS3220 Type-C DRP Port + controller driver. + + If you choose to build this driver as a dynamically linked module, the + module will be called hd3ss3220.ko. + +config TYPEC_STUSB160X + tristate "STMicroelectronics STUSB160x Type-C controller driver" + depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH + depends on I2C + select REGMAP_I2C + help + Say Y or M here if your system has STMicroelectronics STUSB160x + Type-C port controller. + + If you choose to build this driver as a dynamically linked module, the + module will be called stusb160x.ko. + +config TYPEC_WUSB3801 + tristate "Willsemi WUSB3801 Type-C port controller driver" + depends on I2C + select REGMAP_I2C + help + Say Y or M here if your system has a WUSB3801 Type-C port controller. + + If you choose to build this driver as a dynamically linked module, the + module will be called wusb3801.ko. + +source "drivers/usb/typec/mux/Kconfig" + +source "drivers/usb/typec/altmodes/Kconfig" + +endif # TYPEC diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile new file mode 100644 index 0000000000..7a368fea61 --- /dev/null +++ b/drivers/usb/typec/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_TYPEC) += typec.o +typec-y := class.o mux.o bus.o pd.o retimer.o +typec-$(CONFIG_ACPI) += port-mapper.o +obj-$(CONFIG_TYPEC) += altmodes/ +obj-$(CONFIG_TYPEC_TCPM) += tcpm/ +obj-$(CONFIG_TYPEC_UCSI) += ucsi/ +obj-$(CONFIG_TYPEC_TPS6598X) += tipd/ +obj-$(CONFIG_TYPEC_ANX7411) += anx7411.o +obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o +obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o +obj-$(CONFIG_TYPEC_RT1719) += rt1719.o +obj-$(CONFIG_TYPEC_WUSB3801) += wusb3801.o +obj-$(CONFIG_TYPEC) += mux/ diff --git a/drivers/usb/typec/altmodes/Kconfig b/drivers/usb/typec/altmodes/Kconfig new file mode 100644 index 0000000000..1a6b5e872b --- /dev/null +++ b/drivers/usb/typec/altmodes/Kconfig @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 + +menu "USB Type-C Alternate Mode drivers" + +config TYPEC_DP_ALTMODE + tristate "DisplayPort Alternate Mode driver" + depends on DRM + help + DisplayPort USB Type-C Alternate Mode allows DisplayPort + displays and adapters to be attached to the USB Type-C + connectors on the system. + + To compile this driver as a module, choose M here: the + module will be called typec_displayport. + +config TYPEC_NVIDIA_ALTMODE + tristate "NVIDIA Alternate Mode driver" + depends on TYPEC_DP_ALTMODE + help + Latest NVIDIA GPUs support VirtualLink devices. Select this + to enable support for VirtualLink devices with NVIDIA GPUs. + + To compile this driver as a module, choose M here: the + module will be called typec_nvidia. + +endmenu diff --git a/drivers/usb/typec/altmodes/Makefile b/drivers/usb/typec/altmodes/Makefile new file mode 100644 index 0000000000..45717548b3 --- /dev/null +++ b/drivers/usb/typec/altmodes/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_TYPEC_DP_ALTMODE) += typec_displayport.o +typec_displayport-y := displayport.o +obj-$(CONFIG_TYPEC_NVIDIA_ALTMODE) += typec_nvidia.o +typec_nvidia-y := nvidia.o diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c new file mode 100644 index 0000000000..59e0218a8b --- /dev/null +++ b/drivers/usb/typec/altmodes/displayport.c @@ -0,0 +1,653 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB Typec-C DisplayPort Alternate Mode driver + * + * Copyright (C) 2018 Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * + * DisplayPort is trademark of VESA (www.vesa.org) + */ + +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/usb/pd_vdo.h> +#include <linux/usb/typec_dp.h> +#include <drm/drm_connector.h> +#include "displayport.h" + +#define DP_HEADER(_dp, ver, cmd) (VDO((_dp)->alt->svid, 1, ver, cmd) \ + | VDO_OPOS(USB_TYPEC_DP_MODE)) + +enum { + DP_CONF_USB, + DP_CONF_DFP_D, + DP_CONF_UFP_D, + DP_CONF_DUAL_D, +}; + +/* Pin assignments that use USB3.1 Gen2 signaling to carry DP protocol */ +#define DP_PIN_ASSIGN_GEN2_BR_MASK (BIT(DP_PIN_ASSIGN_A) | \ + BIT(DP_PIN_ASSIGN_B)) + +/* Pin assignments that use DP v1.3 signaling to carry DP protocol */ +#define DP_PIN_ASSIGN_DP_BR_MASK (BIT(DP_PIN_ASSIGN_C) | \ + BIT(DP_PIN_ASSIGN_D) | \ + BIT(DP_PIN_ASSIGN_E) | \ + BIT(DP_PIN_ASSIGN_F)) + +/* DP only pin assignments */ +#define DP_PIN_ASSIGN_DP_ONLY_MASK (BIT(DP_PIN_ASSIGN_A) | \ + BIT(DP_PIN_ASSIGN_C) | \ + BIT(DP_PIN_ASSIGN_E)) + +/* Pin assignments where one channel is for USB */ +#define DP_PIN_ASSIGN_MULTI_FUNC_MASK (BIT(DP_PIN_ASSIGN_B) | \ + BIT(DP_PIN_ASSIGN_D) | \ + BIT(DP_PIN_ASSIGN_F)) + +enum dp_state { + DP_STATE_IDLE, + DP_STATE_ENTER, + DP_STATE_UPDATE, + DP_STATE_CONFIGURE, + DP_STATE_EXIT, +}; + +struct dp_altmode { + struct typec_displayport_data data; + + enum dp_state state; + bool hpd; + bool pending_hpd; + + struct mutex lock; /* device lock */ + struct work_struct work; + struct typec_altmode *alt; + const struct typec_altmode *port; + struct fwnode_handle *connector_fwnode; +}; + +static int dp_altmode_notify(struct dp_altmode *dp) +{ + unsigned long conf; + u8 state; + + if (dp->data.conf) { + state = get_count_order(DP_CONF_GET_PIN_ASSIGN(dp->data.conf)); + conf = TYPEC_MODAL_STATE(state); + } else { + conf = TYPEC_STATE_USB; + } + + return typec_altmode_notify(dp->alt, conf, &dp->data); +} + +static int dp_altmode_configure(struct dp_altmode *dp, u8 con) +{ + u32 conf = DP_CONF_SIGNALING_DP; /* Only DP signaling supported */ + u8 pin_assign = 0; + + switch (con) { + case DP_STATUS_CON_DISABLED: + return 0; + case DP_STATUS_CON_DFP_D: + conf |= DP_CONF_UFP_U_AS_DFP_D; + pin_assign = DP_CAP_UFP_D_PIN_ASSIGN(dp->alt->vdo) & + DP_CAP_DFP_D_PIN_ASSIGN(dp->port->vdo); + break; + case DP_STATUS_CON_UFP_D: + case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */ + conf |= DP_CONF_UFP_U_AS_UFP_D; + pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) & + DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo); + break; + default: + break; + } + + /* Determining the initial pin assignment. */ + if (!DP_CONF_GET_PIN_ASSIGN(dp->data.conf)) { + /* Is USB together with DP preferred */ + if (dp->data.status & DP_STATUS_PREFER_MULTI_FUNC && + pin_assign & DP_PIN_ASSIGN_MULTI_FUNC_MASK) + pin_assign &= DP_PIN_ASSIGN_MULTI_FUNC_MASK; + else if (pin_assign & DP_PIN_ASSIGN_DP_ONLY_MASK) { + pin_assign &= DP_PIN_ASSIGN_DP_ONLY_MASK; + /* Default to pin assign C if available */ + if (pin_assign & BIT(DP_PIN_ASSIGN_C)) + pin_assign = BIT(DP_PIN_ASSIGN_C); + } + + if (!pin_assign) + return -EINVAL; + + conf |= DP_CONF_SET_PIN_ASSIGN(pin_assign); + } + + dp->data.conf = conf; + + return 0; +} + +static int dp_altmode_status_update(struct dp_altmode *dp) +{ + bool configured = !!DP_CONF_GET_PIN_ASSIGN(dp->data.conf); + bool hpd = !!(dp->data.status & DP_STATUS_HPD_STATE); + u8 con = DP_STATUS_CONNECTION(dp->data.status); + int ret = 0; + + if (configured && (dp->data.status & DP_STATUS_SWITCH_TO_USB)) { + dp->data.conf = 0; + dp->state = DP_STATE_CONFIGURE; + } else if (dp->data.status & DP_STATUS_EXIT_DP_MODE) { + dp->state = DP_STATE_EXIT; + } else if (!(con & DP_CONF_CURRENTLY(dp->data.conf))) { + ret = dp_altmode_configure(dp, con); + if (!ret) { + dp->state = DP_STATE_CONFIGURE; + if (dp->hpd != hpd) { + dp->hpd = hpd; + dp->pending_hpd = true; + } + } + } else { + if (dp->hpd != hpd) { + drm_connector_oob_hotplug_event(dp->connector_fwnode); + dp->hpd = hpd; + sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd"); + } + } + + return ret; +} + +static int dp_altmode_configured(struct dp_altmode *dp) +{ + sysfs_notify(&dp->alt->dev.kobj, "displayport", "configuration"); + sysfs_notify(&dp->alt->dev.kobj, "displayport", "pin_assignment"); + /* + * If the DFP_D/UFP_D sends a change in HPD when first notifying the + * DisplayPort driver that it is connected, then we wait until + * configuration is complete to signal HPD. + */ + if (dp->pending_hpd) { + drm_connector_oob_hotplug_event(dp->connector_fwnode); + sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd"); + dp->pending_hpd = false; + } + + return dp_altmode_notify(dp); +} + +static int dp_altmode_configure_vdm(struct dp_altmode *dp, u32 conf) +{ + int svdm_version = typec_altmode_get_svdm_version(dp->alt); + u32 header; + int ret; + + if (svdm_version < 0) + return svdm_version; + + header = DP_HEADER(dp, svdm_version, DP_CMD_CONFIGURE); + ret = typec_altmode_notify(dp->alt, TYPEC_STATE_SAFE, &dp->data); + if (ret) { + dev_err(&dp->alt->dev, + "unable to put to connector to safe mode\n"); + return ret; + } + + ret = typec_altmode_vdm(dp->alt, header, &conf, 2); + if (ret) + dp_altmode_notify(dp); + + return ret; +} + +static void dp_altmode_work(struct work_struct *work) +{ + struct dp_altmode *dp = container_of(work, struct dp_altmode, work); + int svdm_version; + u32 header; + u32 vdo; + int ret; + + mutex_lock(&dp->lock); + + switch (dp->state) { + case DP_STATE_ENTER: + ret = typec_altmode_enter(dp->alt, NULL); + if (ret && ret != -EBUSY) + dev_err(&dp->alt->dev, "failed to enter mode\n"); + break; + case DP_STATE_UPDATE: + svdm_version = typec_altmode_get_svdm_version(dp->alt); + if (svdm_version < 0) + break; + header = DP_HEADER(dp, svdm_version, DP_CMD_STATUS_UPDATE); + vdo = 1; + ret = typec_altmode_vdm(dp->alt, header, &vdo, 2); + if (ret) + dev_err(&dp->alt->dev, + "unable to send Status Update command (%d)\n", + ret); + break; + case DP_STATE_CONFIGURE: + ret = dp_altmode_configure_vdm(dp, dp->data.conf); + if (ret) + dev_err(&dp->alt->dev, + "unable to send Configure command (%d)\n", ret); + break; + case DP_STATE_EXIT: + if (typec_altmode_exit(dp->alt)) + dev_err(&dp->alt->dev, "Exit Mode Failed!\n"); + break; + default: + break; + } + + dp->state = DP_STATE_IDLE; + + mutex_unlock(&dp->lock); +} + +static void dp_altmode_attention(struct typec_altmode *alt, const u32 vdo) +{ + struct dp_altmode *dp = typec_altmode_get_drvdata(alt); + u8 old_state; + + mutex_lock(&dp->lock); + + old_state = dp->state; + dp->data.status = vdo; + + if (old_state != DP_STATE_IDLE) + dev_warn(&alt->dev, "ATTENTION while processing state %d\n", + old_state); + + if (dp_altmode_status_update(dp)) + dev_warn(&alt->dev, "%s: status update failed\n", __func__); + + if (dp_altmode_notify(dp)) + dev_err(&alt->dev, "%s: notification failed\n", __func__); + + if (old_state == DP_STATE_IDLE && dp->state != DP_STATE_IDLE) + schedule_work(&dp->work); + + mutex_unlock(&dp->lock); +} + +static int dp_altmode_vdm(struct typec_altmode *alt, + const u32 hdr, const u32 *vdo, int count) +{ + struct dp_altmode *dp = typec_altmode_get_drvdata(alt); + int cmd_type = PD_VDO_CMDT(hdr); + int cmd = PD_VDO_CMD(hdr); + int ret = 0; + + mutex_lock(&dp->lock); + + if (dp->state != DP_STATE_IDLE) { + ret = -EBUSY; + goto err_unlock; + } + + switch (cmd_type) { + case CMDT_RSP_ACK: + switch (cmd) { + case CMD_ENTER_MODE: + typec_altmode_update_active(alt, true); + dp->state = DP_STATE_UPDATE; + break; + case CMD_EXIT_MODE: + typec_altmode_update_active(alt, false); + dp->data.status = 0; + dp->data.conf = 0; + if (dp->hpd) { + drm_connector_oob_hotplug_event(dp->connector_fwnode); + dp->hpd = false; + sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd"); + } + break; + case DP_CMD_STATUS_UPDATE: + dp->data.status = *vdo; + ret = dp_altmode_status_update(dp); + break; + case DP_CMD_CONFIGURE: + ret = dp_altmode_configured(dp); + break; + default: + break; + } + break; + case CMDT_RSP_NAK: + switch (cmd) { + case DP_CMD_CONFIGURE: + dp->data.conf = 0; + ret = dp_altmode_configured(dp); + break; + default: + break; + } + break; + default: + break; + } + + if (dp->state != DP_STATE_IDLE) + schedule_work(&dp->work); + +err_unlock: + mutex_unlock(&dp->lock); + return ret; +} + +static int dp_altmode_activate(struct typec_altmode *alt, int activate) +{ + return activate ? typec_altmode_enter(alt, NULL) : + typec_altmode_exit(alt); +} + +static const struct typec_altmode_ops dp_altmode_ops = { + .attention = dp_altmode_attention, + .vdm = dp_altmode_vdm, + .activate = dp_altmode_activate, +}; + +static const char * const configurations[] = { + [DP_CONF_USB] = "USB", + [DP_CONF_DFP_D] = "source", + [DP_CONF_UFP_D] = "sink", +}; + +static ssize_t +configuration_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t size) +{ + struct dp_altmode *dp = dev_get_drvdata(dev); + u32 conf; + u32 cap; + int con; + int ret = 0; + + con = sysfs_match_string(configurations, buf); + if (con < 0) + return con; + + mutex_lock(&dp->lock); + + if (dp->state != DP_STATE_IDLE) { + ret = -EBUSY; + goto err_unlock; + } + + cap = DP_CAP_CAPABILITY(dp->alt->vdo); + + if ((con == DP_CONF_DFP_D && !(cap & DP_CAP_DFP_D)) || + (con == DP_CONF_UFP_D && !(cap & DP_CAP_UFP_D))) { + ret = -EINVAL; + goto err_unlock; + } + + conf = dp->data.conf & ~DP_CONF_DUAL_D; + conf |= con; + + if (dp->alt->active) { + ret = dp_altmode_configure_vdm(dp, conf); + if (ret) + goto err_unlock; + } + + dp->data.conf = conf; + +err_unlock: + mutex_unlock(&dp->lock); + + return ret ? ret : size; +} + +static ssize_t configuration_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dp_altmode *dp = dev_get_drvdata(dev); + int len; + u8 cap; + u8 cur; + int i; + + mutex_lock(&dp->lock); + + cap = DP_CAP_CAPABILITY(dp->alt->vdo); + cur = DP_CONF_CURRENTLY(dp->data.conf); + + len = sprintf(buf, "%s ", cur ? "USB" : "[USB]"); + + for (i = 1; i < ARRAY_SIZE(configurations); i++) { + if (i == cur) + len += sprintf(buf + len, "[%s] ", configurations[i]); + else if ((i == DP_CONF_DFP_D && cap & DP_CAP_DFP_D) || + (i == DP_CONF_UFP_D && cap & DP_CAP_UFP_D)) + len += sprintf(buf + len, "%s ", configurations[i]); + } + + mutex_unlock(&dp->lock); + + buf[len - 1] = '\n'; + return len; +} +static DEVICE_ATTR_RW(configuration); + +static const char * const pin_assignments[] = { + [DP_PIN_ASSIGN_A] = "A", + [DP_PIN_ASSIGN_B] = "B", + [DP_PIN_ASSIGN_C] = "C", + [DP_PIN_ASSIGN_D] = "D", + [DP_PIN_ASSIGN_E] = "E", + [DP_PIN_ASSIGN_F] = "F", +}; + +/* + * Helper function to extract a peripheral's currently supported + * Pin Assignments from its DisplayPort alternate mode state. + */ +static u8 get_current_pin_assignments(struct dp_altmode *dp) +{ + if (DP_CONF_CURRENTLY(dp->data.conf) == DP_CONF_UFP_U_AS_DFP_D) + return DP_CAP_PIN_ASSIGN_DFP_D(dp->alt->vdo); + else + return DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo); +} + +static ssize_t +pin_assignment_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t size) +{ + struct dp_altmode *dp = dev_get_drvdata(dev); + u8 assignments; + u32 conf; + int ret; + + ret = sysfs_match_string(pin_assignments, buf); + if (ret < 0) + return ret; + + conf = DP_CONF_SET_PIN_ASSIGN(BIT(ret)); + ret = 0; + + mutex_lock(&dp->lock); + + if (conf & dp->data.conf) + goto out_unlock; + + if (dp->state != DP_STATE_IDLE) { + ret = -EBUSY; + goto out_unlock; + } + + assignments = get_current_pin_assignments(dp); + + if (!(DP_CONF_GET_PIN_ASSIGN(conf) & assignments)) { + ret = -EINVAL; + goto out_unlock; + } + + conf |= dp->data.conf & ~DP_CONF_PIN_ASSIGNEMENT_MASK; + + /* Only send Configure command if a configuration has been set */ + if (dp->alt->active && DP_CONF_CURRENTLY(dp->data.conf)) { + ret = dp_altmode_configure_vdm(dp, conf); + if (ret) + goto out_unlock; + } + + dp->data.conf = conf; + +out_unlock: + mutex_unlock(&dp->lock); + + return ret ? ret : size; +} + +static ssize_t pin_assignment_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dp_altmode *dp = dev_get_drvdata(dev); + u8 assignments; + int len = 0; + u8 cur; + int i; + + mutex_lock(&dp->lock); + + cur = get_count_order(DP_CONF_GET_PIN_ASSIGN(dp->data.conf)); + + assignments = get_current_pin_assignments(dp); + + for (i = 0; assignments; assignments >>= 1, i++) { + if (assignments & 1) { + if (i == cur) + len += sprintf(buf + len, "[%s] ", + pin_assignments[i]); + else + len += sprintf(buf + len, "%s ", + pin_assignments[i]); + } + } + + mutex_unlock(&dp->lock); + + /* get_current_pin_assignments can return 0 when no matching pin assignments are found */ + if (len == 0) + len++; + + buf[len - 1] = '\n'; + return len; +} +static DEVICE_ATTR_RW(pin_assignment); + +static ssize_t hpd_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct dp_altmode *dp = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", dp->hpd); +} +static DEVICE_ATTR_RO(hpd); + +static struct attribute *dp_altmode_attrs[] = { + &dev_attr_configuration.attr, + &dev_attr_pin_assignment.attr, + &dev_attr_hpd.attr, + NULL +}; + +static const struct attribute_group dp_altmode_group = { + .name = "displayport", + .attrs = dp_altmode_attrs, +}; + +int dp_altmode_probe(struct typec_altmode *alt) +{ + const struct typec_altmode *port = typec_altmode_get_partner(alt); + struct fwnode_handle *fwnode; + struct dp_altmode *dp; + int ret; + + /* FIXME: Port can only be DFP_U. */ + + /* Make sure we have compatiple pin configurations */ + if (!(DP_CAP_PIN_ASSIGN_DFP_D(port->vdo) & + DP_CAP_PIN_ASSIGN_UFP_D(alt->vdo)) && + !(DP_CAP_PIN_ASSIGN_UFP_D(port->vdo) & + DP_CAP_PIN_ASSIGN_DFP_D(alt->vdo))) + return -ENODEV; + + ret = sysfs_create_group(&alt->dev.kobj, &dp_altmode_group); + if (ret) + return ret; + + dp = devm_kzalloc(&alt->dev, sizeof(*dp), GFP_KERNEL); + if (!dp) + return -ENOMEM; + + INIT_WORK(&dp->work, dp_altmode_work); + mutex_init(&dp->lock); + dp->port = port; + dp->alt = alt; + + alt->desc = "DisplayPort"; + alt->ops = &dp_altmode_ops; + + fwnode = dev_fwnode(alt->dev.parent->parent); /* typec_port fwnode */ + if (fwnode_property_present(fwnode, "displayport")) + dp->connector_fwnode = fwnode_find_reference(fwnode, "displayport", 0); + else + dp->connector_fwnode = fwnode_handle_get(fwnode); /* embedded DP */ + if (IS_ERR(dp->connector_fwnode)) + dp->connector_fwnode = NULL; + + typec_altmode_set_drvdata(alt, dp); + + dp->state = DP_STATE_ENTER; + schedule_work(&dp->work); + + return 0; +} +EXPORT_SYMBOL_GPL(dp_altmode_probe); + +void dp_altmode_remove(struct typec_altmode *alt) +{ + struct dp_altmode *dp = typec_altmode_get_drvdata(alt); + + sysfs_remove_group(&alt->dev.kobj, &dp_altmode_group); + cancel_work_sync(&dp->work); + + if (dp->connector_fwnode) { + if (dp->hpd) + drm_connector_oob_hotplug_event(dp->connector_fwnode); + + fwnode_handle_put(dp->connector_fwnode); + } +} +EXPORT_SYMBOL_GPL(dp_altmode_remove); + +static const struct typec_device_id dp_typec_id[] = { + { USB_TYPEC_DP_SID, USB_TYPEC_DP_MODE }, + { }, +}; +MODULE_DEVICE_TABLE(typec, dp_typec_id); + +static struct typec_altmode_driver dp_altmode_driver = { + .id_table = dp_typec_id, + .probe = dp_altmode_probe, + .remove = dp_altmode_remove, + .driver = { + .name = "typec_displayport", + .owner = THIS_MODULE, + }, +}; +module_typec_altmode_driver(dp_altmode_driver); + +MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("DisplayPort Alternate Mode"); diff --git a/drivers/usb/typec/altmodes/displayport.h b/drivers/usb/typec/altmodes/displayport.h new file mode 100644 index 0000000000..e120364da9 --- /dev/null +++ b/drivers/usb/typec/altmodes/displayport.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE) +int dp_altmode_probe(struct typec_altmode *alt); +void dp_altmode_remove(struct typec_altmode *alt); +#else +int dp_altmode_probe(struct typec_altmode *alt) { return -ENOTSUPP; } +void dp_altmode_remove(struct typec_altmode *alt) { } +#endif /* CONFIG_TYPEC_DP_ALTMODE */ diff --git a/drivers/usb/typec/altmodes/nvidia.c b/drivers/usb/typec/altmodes/nvidia.c new file mode 100644 index 0000000000..c367697364 --- /dev/null +++ b/drivers/usb/typec/altmodes/nvidia.c @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 NVIDIA Corporation. All rights reserved. + * + * NVIDIA USB Type-C Alt Mode Driver + */ +#include <linux/module.h> +#include <linux/usb/typec_altmode.h> +#include <linux/usb/typec_dp.h> +#include "displayport.h" + +static int nvidia_altmode_probe(struct typec_altmode *alt) +{ + if (alt->svid == USB_TYPEC_NVIDIA_VLINK_SID) + return dp_altmode_probe(alt); + else + return -ENOTSUPP; +} + +static void nvidia_altmode_remove(struct typec_altmode *alt) +{ + if (alt->svid == USB_TYPEC_NVIDIA_VLINK_SID) + dp_altmode_remove(alt); +} + +static const struct typec_device_id nvidia_typec_id[] = { + { USB_TYPEC_NVIDIA_VLINK_SID, TYPEC_ANY_MODE }, + { }, +}; +MODULE_DEVICE_TABLE(typec, nvidia_typec_id); + +static struct typec_altmode_driver nvidia_altmode_driver = { + .id_table = nvidia_typec_id, + .probe = nvidia_altmode_probe, + .remove = nvidia_altmode_remove, + .driver = { + .name = "typec_nvidia", + .owner = THIS_MODULE, + }, +}; +module_typec_altmode_driver(nvidia_altmode_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("NVIDIA USB Type-C Alt Mode Driver"); diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c new file mode 100644 index 0000000000..221604f933 --- /dev/null +++ b/drivers/usb/typec/anx7411.c @@ -0,0 +1,1598 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Driver for Analogix ANX7411 USB Type-C and PD controller + * + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved. + * + */ +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_graph.h> +#include <linux/of_platform.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/usb/pd.h> +#include <linux/usb/role.h> +#include <linux/usb/tcpci.h> +#include <linux/usb/typec.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_mux.h> +#include <linux/workqueue.h> +#include <linux/power_supply.h> + +#define TCPC_ADDRESS1 0x58 +#define TCPC_ADDRESS2 0x56 +#define TCPC_ADDRESS3 0x54 +#define TCPC_ADDRESS4 0x52 +#define SPI_ADDRESS1 0x7e +#define SPI_ADDRESS2 0x6e +#define SPI_ADDRESS3 0x64 +#define SPI_ADDRESS4 0x62 + +struct anx7411_i2c_select { + u8 tcpc_address; + u8 spi_address; +}; + +#define VID_ANALOGIX 0x1F29 +#define PID_ANALOGIX 0x7411 + +/* TCPC register define */ + +#define ANALOG_CTRL_10 0xAA + +#define STATUS_LEN 2 +#define ALERT_0 0xCB +#define RECEIVED_MSG BIT(7) +#define SOFTWARE_INT BIT(6) +#define MSG_LEN 32 +#define HEADER_LEN 2 +#define MSG_HEADER 0x00 +#define MSG_TYPE 0x01 +#define MSG_RAWDATA 0x02 +#define MSG_LEN_MASK 0x1F + +#define ALERT_1 0xCC +#define INTP_POW_ON BIT(7) +#define INTP_POW_OFF BIT(6) + +#define VBUS_THRESHOLD_H 0xDD +#define VBUS_THRESHOLD_L 0xDE + +#define FW_CTRL_0 0xF0 +#define UNSTRUCT_VDM_EN BIT(0) +#define DELAY_200MS BIT(1) +#define VSAFE0 0 +#define VSAFE1 BIT(2) +#define VSAFE2 BIT(3) +#define VSAFE3 (BIT(2) | BIT(3)) +#define FRS_EN BIT(7) + +#define FW_PARAM 0xF1 +#define DONGLE_IOP BIT(0) + +#define FW_CTRL_2 0xF7 +#define SINK_CTRL_DIS_FLAG BIT(5) + +/* SPI register define */ +#define OCM_CTRL_0 0x6E +#define OCM_RESET BIT(6) + +#define MAX_VOLTAGE 0xAC +#define MAX_POWER 0xAD +#define MIN_POWER 0xAE + +#define REQUEST_VOLTAGE 0xAF +#define VOLTAGE_UNIT 100 /* mV per unit */ + +#define REQUEST_CURRENT 0xB1 +#define CURRENT_UNIT 50 /* mA per unit */ + +#define CMD_SEND_BUF 0xC0 +#define CMD_RECV_BUF 0xE0 + +#define REQ_VOL_20V_IN_100MV 0xC8 +#define REQ_CUR_2_25A_IN_50MA 0x2D +#define REQ_CUR_3_25A_IN_50MA 0x41 + +#define DEF_5V 5000 +#define DEF_1_5A 1500 + +#define LOBYTE(w) ((u8)((w) & 0xFF)) +#define HIBYTE(w) ((u8)(((u16)(w) >> 8) & 0xFF)) + +enum anx7411_typec_message_type { + TYPE_SRC_CAP = 0x00, + TYPE_SNK_CAP = 0x01, + TYPE_SNK_IDENTITY = 0x02, + TYPE_SVID = 0x03, + TYPE_SET_SNK_DP_CAP = 0x08, + TYPE_PSWAP_REQ = 0x10, + TYPE_DSWAP_REQ = 0x11, + TYPE_VDM = 0x14, + TYPE_OBJ_REQ = 0x16, + TYPE_DP_ALT_ENTER = 0x19, + TYPE_DP_DISCOVER_MODES_INFO = 0x27, + TYPE_GET_DP_CONFIG = 0x29, + TYPE_DP_CONFIGURE = 0x2A, + TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E, + TYPE_GET_DP_ALT_ENTER = 0x2F, +}; + +#define FW_CTRL_1 0xB2 +#define AUTO_PD_EN BIT(1) +#define TRYSRC_EN BIT(2) +#define TRYSNK_EN BIT(3) +#define FORCE_SEND_RDO BIT(6) + +#define FW_VER 0xB4 +#define FW_SUBVER 0xB5 + +#define INT_MASK 0xB6 +#define INT_STS 0xB7 +#define OCM_BOOT_UP BIT(0) +#define OC_OV_EVENT BIT(1) +#define VCONN_CHANGE BIT(2) +#define VBUS_CHANGE BIT(3) +#define CC_STATUS_CHANGE BIT(4) +#define DATA_ROLE_CHANGE BIT(5) +#define PR_CONSUMER_GOT_POWER BIT(6) +#define HPD_STATUS_CHANGE BIT(7) + +#define SYSTEM_STSTUS 0xB8 +/* 0: SINK off; 1: SINK on */ +#define SINK_STATUS BIT(1) +/* 0: VCONN off; 1: VCONN on*/ +#define VCONN_STATUS BIT(2) +/* 0: vbus off; 1: vbus on*/ +#define VBUS_STATUS BIT(3) +/* 1: host; 0:device*/ +#define DATA_ROLE BIT(5) +/* 0: Chunking; 1: Unchunked*/ +#define SUPPORT_UNCHUNKING BIT(6) +/* 0: HPD low; 1: HPD high*/ +#define HPD_STATUS BIT(7) + +#define DATA_DFP 1 +#define DATA_UFP 2 +#define POWER_SOURCE 1 +#define POWER_SINK 2 + +#define CC_STATUS 0xB9 +#define CC1_RD BIT(0) +#define CC2_RD BIT(4) +#define CC1_RA BIT(1) +#define CC2_RA BIT(5) +#define CC1_RD BIT(0) +#define CC1_RP(cc) (((cc) >> 2) & 0x03) +#define CC2_RP(cc) (((cc) >> 6) & 0x03) + +#define PD_REV_INIT 0xBA + +#define PD_EXT_MSG_CTRL 0xBB +#define SRC_CAP_EXT_REPLY BIT(0) +#define MANUFACTURER_INFO_REPLY BIT(1) +#define BATTERY_STS_REPLY BIT(2) +#define BATTERY_CAP_REPLY BIT(3) +#define ALERT_REPLY BIT(4) +#define STATUS_REPLY BIT(5) +#define PPS_STATUS_REPLY BIT(6) +#define SNK_CAP_EXT_REPLY BIT(7) + +#define NO_CONNECT 0x00 +#define USB3_1_CONNECTED 0x01 +#define DP_ALT_4LANES 0x02 +#define USB3_1_DP_2LANES 0x03 +#define CC1_CONNECTED 0x01 +#define CC2_CONNECTED 0x02 +#define SELECT_PIN_ASSIGMENT_C 0x04 +#define SELECT_PIN_ASSIGMENT_D 0x08 +#define SELECT_PIN_ASSIGMENT_E 0x10 +#define SELECT_PIN_ASSIGMENT_U 0x00 +#define REDRIVER_ADDRESS 0x20 +#define REDRIVER_OFFSET 0x00 + +#define DP_SVID 0xFF01 +#define VDM_ACK 0x40 +#define VDM_CMD_RES 0x00 +#define VDM_CMD_DIS_ID 0x01 +#define VDM_CMD_DIS_SVID 0x02 +#define VDM_CMD_DIS_MOD 0x03 +#define VDM_CMD_ENTER_MODE 0x04 +#define VDM_CMD_EXIT_MODE 0x05 +#define VDM_CMD_ATTENTION 0x06 +#define VDM_CMD_GET_STS 0x10 +#define VDM_CMD_AND_ACK_MASK 0x5F + +#define MAX_ALTMODE 2 + +#define HAS_SOURCE_CAP BIT(0) +#define HAS_SINK_CAP BIT(1) +#define HAS_SINK_WATT BIT(2) + +enum anx7411_psy_state { + /* copy from drivers/usb/typec/tcpm */ + ANX7411_PSY_OFFLINE = 0, + ANX7411_PSY_FIXED_ONLINE, + + /* private */ + /* PD keep in, but disconnct power to bq25700, + * this state can be active when higher capacity adapter plug in, + * and change to ONLINE state when higher capacity adapter plug out + */ + ANX7411_PSY_HANG = 0xff, +}; + +struct typec_params { + int request_current; /* ma */ + int request_voltage; /* mv */ + int cc_connect; + int cc_orientation_valid; + int cc_status; + int data_role; + int power_role; + int vconn_role; + int dp_altmode_enter; + int cust_altmode_enter; + struct usb_role_switch *role_sw; + struct typec_port *port; + struct typec_partner *partner; + struct typec_mux_dev *typec_mux; + struct typec_switch_dev *typec_switch; + struct typec_altmode *amode[MAX_ALTMODE]; + struct typec_altmode *port_amode[MAX_ALTMODE]; + struct typec_displayport_data data; + int pin_assignment; + struct typec_capability caps; + u32 src_pdo[PDO_MAX_OBJECTS]; + u32 sink_pdo[PDO_MAX_OBJECTS]; + u8 caps_flags; + u8 src_pdo_nr; + u8 sink_pdo_nr; + u8 sink_watt; + u8 sink_voltage; +}; + +#define MAX_BUF_LEN 30 +struct fw_msg { + u8 msg_len; + u8 msg_type; + u8 buf[MAX_BUF_LEN]; +} __packed; + +struct anx7411_data { + int fw_version; + int fw_subversion; + struct i2c_client *tcpc_client; + struct i2c_client *spi_client; + struct fw_msg send_msg; + struct fw_msg recv_msg; + struct gpio_desc *intp_gpiod; + struct fwnode_handle *connector_fwnode; + struct typec_params typec; + int intp_irq; + struct work_struct work; + struct workqueue_struct *workqueue; + /* Lock for interrupt work queue */ + struct mutex lock; + + enum anx7411_psy_state psy_online; + enum power_supply_usb_type usb_type; + struct power_supply *psy; + struct power_supply_desc psy_desc; + struct device *dev; +}; + +static u8 snk_identity[] = { + LOBYTE(VID_ANALOGIX), HIBYTE(VID_ANALOGIX), 0x00, 0x82, /* snk_id_hdr */ + 0x00, 0x00, 0x00, 0x00, /* snk_cert */ + 0x00, 0x00, LOBYTE(PID_ANALOGIX), HIBYTE(PID_ANALOGIX), /* 5snk_ama */ +}; + +static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00}; + +static int anx7411_reg_read(struct i2c_client *client, + u8 reg_addr) +{ + return i2c_smbus_read_byte_data(client, reg_addr); +} + +static int anx7411_reg_block_read(struct i2c_client *client, + u8 reg_addr, u8 len, u8 *buf) +{ + return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf); +} + +static int anx7411_reg_write(struct i2c_client *client, + u8 reg_addr, u8 reg_val) +{ + return i2c_smbus_write_byte_data(client, reg_addr, reg_val); +} + +static int anx7411_reg_block_write(struct i2c_client *client, + u8 reg_addr, u8 len, u8 *buf) +{ + return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf); +} + +static struct anx7411_i2c_select anx7411_i2c_addr[] = { + {TCPC_ADDRESS1, SPI_ADDRESS1}, + {TCPC_ADDRESS2, SPI_ADDRESS2}, + {TCPC_ADDRESS3, SPI_ADDRESS3}, + {TCPC_ADDRESS4, SPI_ADDRESS4}, +}; + +static int anx7411_detect_power_mode(struct anx7411_data *ctx) +{ + int ret; + int mode; + + ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT); + if (ret < 0) + return ret; + + ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */ + + ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE); + if (ret < 0) + return ret; + + ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */ + + if (ctx->psy_online == ANX7411_PSY_OFFLINE) { + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE; + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD; + power_supply_changed(ctx->psy); + } + + if (!ctx->typec.cc_orientation_valid) + return 0; + + if (ctx->typec.cc_connect == CC1_CONNECTED) + mode = CC1_RP(ctx->typec.cc_status); + else + mode = CC2_RP(ctx->typec.cc_status); + if (mode) { + typec_set_pwr_opmode(ctx->typec.port, mode - 1); + return 0; + } + + typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD); + + return 0; +} + +static int anx7411_register_partner(struct anx7411_data *ctx, + int pd, int accessory) +{ + struct typec_partner_desc desc; + struct typec_partner *partner; + + if (ctx->typec.partner) + return 0; + + desc.usb_pd = pd; + desc.accessory = accessory; + desc.identity = NULL; + partner = typec_register_partner(ctx->typec.port, &desc); + if (IS_ERR(partner)) + return PTR_ERR(partner); + + ctx->typec.partner = partner; + + return 0; +} + +static int anx7411_detect_cc_orientation(struct anx7411_data *ctx) +{ + struct device *dev = &ctx->spi_client->dev; + int ret; + int cc1_rd, cc2_rd; + int cc1_ra, cc2_ra; + int cc1_rp, cc2_rp; + + ret = anx7411_reg_read(ctx->spi_client, CC_STATUS); + if (ret < 0) + return ret; + + ctx->typec.cc_status = ret; + + cc1_rd = ret & CC1_RD ? 1 : 0; + cc2_rd = ret & CC2_RD ? 1 : 0; + cc1_ra = ret & CC1_RA ? 1 : 0; + cc2_ra = ret & CC2_RA ? 1 : 0; + cc1_rp = CC1_RP(ret); + cc2_rp = CC2_RP(ret); + + /* Debug cable, nothing to do */ + if (cc1_rd && cc2_rd) { + ctx->typec.cc_orientation_valid = 0; + return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG); + } + + if (cc1_ra && cc2_ra) { + ctx->typec.cc_orientation_valid = 0; + return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO); + } + + ctx->typec.cc_orientation_valid = 1; + + ret = anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE); + if (ret) { + dev_err(dev, "register partner\n"); + return ret; + } + + if (cc1_rd || cc1_rp) { + typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_NORMAL); + ctx->typec.cc_connect = CC1_CONNECTED; + } + + if (cc2_rd || cc2_rp) { + typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_REVERSE); + ctx->typec.cc_connect = CC2_CONNECTED; + } + + return 0; +} + +static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment) +{ + int mode = TYPEC_STATE_SAFE; + + switch (pin_assignment) { + case SELECT_PIN_ASSIGMENT_U: + /* default 4 line USB 3.1 */ + mode = TYPEC_STATE_MODAL; + break; + case SELECT_PIN_ASSIGMENT_C: + case SELECT_PIN_ASSIGMENT_E: + /* 4 line DP */ + mode = TYPEC_STATE_SAFE; + break; + case SELECT_PIN_ASSIGMENT_D: + /* 2 line DP, 2 line USB */ + mode = TYPEC_MODE_USB3; + break; + default: + mode = TYPEC_STATE_SAFE; + break; + } + + ctx->typec.pin_assignment = pin_assignment; + + return typec_set_mode(ctx->typec.port, mode); +} + +static int anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role) +{ + if (!ctx->typec.role_sw) + return 0; + + return usb_role_switch_set_role(ctx->typec.role_sw, role); +} + +static int anx7411_data_role_detect(struct anx7411_data *ctx) +{ + int ret; + + ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS); + if (ret < 0) + return ret; + + ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE; + ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK; + + typec_set_data_role(ctx->typec.port, ctx->typec.data_role); + + typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role); + + if (ctx->typec.data_role == TYPEC_HOST) + return anx7411_set_usb_role(ctx, USB_ROLE_HOST); + + return anx7411_set_usb_role(ctx, USB_ROLE_DEVICE); +} + +static int anx7411_power_role_detect(struct anx7411_data *ctx) +{ + int ret; + + ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS); + if (ret < 0) + return ret; + + ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE; + + if (ctx->typec.power_role == TYPEC_SOURCE) { + ctx->typec.request_current = DEF_1_5A; + ctx->typec.request_voltage = DEF_5V; + } + + typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role); + + return 0; +} + +static int anx7411_cc_status_detect(struct anx7411_data *ctx) +{ + anx7411_detect_cc_orientation(ctx); + anx7411_detect_power_mode(ctx); + + return 0; +} + +static void anx7411_partner_unregister_altmode(struct anx7411_data *ctx) +{ + int i; + + ctx->typec.dp_altmode_enter = 0; + ctx->typec.cust_altmode_enter = 0; + + for (i = 0; i < MAX_ALTMODE; i++) + if (ctx->typec.amode[i]) { + typec_unregister_altmode(ctx->typec.amode[i]); + ctx->typec.amode[i] = NULL; + } + + ctx->typec.pin_assignment = 0; +} + +static int anx7411_typec_register_altmode(struct anx7411_data *ctx, + int svid, int vdo) +{ + struct device *dev = &ctx->spi_client->dev; + struct typec_altmode_desc desc; + int err; + int i; + + desc.svid = svid; + desc.vdo = vdo; + + for (i = 0; i < MAX_ALTMODE; i++) + if (!ctx->typec.amode[i]) + break; + + desc.mode = i + 1; /* start with 1 */ + + if (i >= MAX_ALTMODE) { + dev_err(dev, "no altmode space for registering\n"); + return -ENOMEM; + } + + ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner, + &desc); + if (IS_ERR(ctx->typec.amode[i])) { + dev_err(dev, "failed to register altmode\n"); + err = PTR_ERR(ctx->typec.amode[i]); + ctx->typec.amode[i] = NULL; + return err; + } + + return 0; +} + +static void anx7411_unregister_partner(struct anx7411_data *ctx) +{ + if (ctx->typec.partner) { + typec_unregister_partner(ctx->typec.partner); + ctx->typec.partner = NULL; + } +} + +static int anx7411_update_altmode(struct anx7411_data *ctx, int svid) +{ + int i; + + if (svid == DP_SVID) + ctx->typec.dp_altmode_enter = 1; + else + ctx->typec.cust_altmode_enter = 1; + + for (i = 0; i < MAX_ALTMODE; i++) { + if (!ctx->typec.amode[i]) + continue; + + if (ctx->typec.amode[i]->svid == svid) { + typec_altmode_update_active(ctx->typec.amode[i], true); + typec_altmode_notify(ctx->typec.amode[i], + ctx->typec.pin_assignment, + &ctx->typec.data); + break; + } + } + + return 0; +} + +static int anx7411_register_altmode(struct anx7411_data *ctx, + bool dp_altmode, u8 *buf) +{ + int ret; + int svid; + int mid; + + if (!ctx->typec.partner) + return 0; + + svid = DP_SVID; + if (dp_altmode) { + mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24); + + return anx7411_typec_register_altmode(ctx, svid, mid); + } + + svid = (buf[3] << 8) | buf[2]; + if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE)) + return anx7411_update_altmode(ctx, svid); + + if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD)) + return 0; + + mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24); + + ret = anx7411_typec_register_altmode(ctx, svid, mid); + if (ctx->typec.cust_altmode_enter) + ret |= anx7411_update_altmode(ctx, svid); + + return ret; +} + +static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len) +{ + struct device *dev = &ctx->spi_client->dev; + u8 cur_50ma, vol_100mv; + + switch (type) { + case TYPE_SRC_CAP: + cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT); + vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE); + + ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT; + ctx->typec.request_current = cur_50ma * CURRENT_UNIT; + + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE; + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD; + power_supply_changed(ctx->psy); + break; + case TYPE_SNK_CAP: + break; + case TYPE_SVID: + break; + case TYPE_SNK_IDENTITY: + break; + case TYPE_GET_DP_ALT_ENTER: + /* DP alt mode enter success */ + if (buf[0]) + anx7411_update_altmode(ctx, DP_SVID); + break; + case TYPE_DP_ALT_ENTER: + /* Update DP altmode */ + anx7411_update_altmode(ctx, DP_SVID); + break; + case TYPE_OBJ_REQ: + anx7411_detect_power_mode(ctx); + break; + case TYPE_DP_CONFIGURE: + anx7411_set_mux(ctx, buf[1]); + break; + case TYPE_DP_DISCOVER_MODES_INFO: + /* Make sure discover modes valid */ + if (buf[0] | buf[1]) + /* Register DP Altmode */ + anx7411_register_altmode(ctx, 1, buf); + break; + case TYPE_VDM: + /* Register other altmode */ + anx7411_register_altmode(ctx, 0, buf); + break; + default: + dev_err(dev, "ignore message(0x%.02x).\n", type); + break; + } + + return 0; +} + +static u8 checksum(struct device *dev, u8 *buf, u8 len) +{ + u8 ret = 0; + u8 i; + + for (i = 0; i < len; i++) + ret += buf[i]; + + return ret; +} + +static int anx7411_read_msg_ctrl_status(struct i2c_client *client) +{ + return anx7411_reg_read(client, CMD_SEND_BUF); +} + +static int anx7411_wait_msg_empty(struct i2c_client *client) +{ + int val; + + return readx_poll_timeout(anx7411_read_msg_ctrl_status, + client, val, (val < 0) || (val == 0), + 2000, 2000 * 150); +} + +static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size) +{ + struct device *dev = &ctx->spi_client->dev; + struct fw_msg *msg = &ctx->send_msg; + u8 crc; + int ret; + + size = min_t(u8, size, (u8)MAX_BUF_LEN); + memcpy(msg->buf, buf, size); + msg->msg_type = type; + /* msg len equals buffer length + msg_type */ + msg->msg_len = size + 1; + + /* Do CRC check for all buffer data and msg_len and msg_type */ + crc = checksum(dev, (u8 *)msg, size + HEADER_LEN); + msg->buf[size] = 0 - crc; + + ret = anx7411_wait_msg_empty(ctx->spi_client); + if (ret) + return ret; + + ret = anx7411_reg_block_write(ctx->spi_client, + CMD_SEND_BUF + 1, size + HEADER_LEN, + &msg->msg_type); + ret |= anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF, + msg->msg_len); + return ret; +} + +static int anx7411_process_cmd(struct anx7411_data *ctx) +{ + struct device *dev = &ctx->spi_client->dev; + struct fw_msg *msg = &ctx->recv_msg; + u8 len; + u8 crc; + int ret; + + /* Read message from firmware */ + ret = anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF, + MSG_LEN, (u8 *)msg); + if (ret < 0) + return 0; + + if (!msg->msg_len) + return 0; + + ret = anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0); + if (ret) + return ret; + + len = msg->msg_len & MSG_LEN_MASK; + crc = checksum(dev, (u8 *)msg, len + HEADER_LEN); + if (crc) { + dev_err(dev, "message error crc(0x%.02x)\n", crc); + return -ERANGE; + } + + return anx7411_parse_cmd(ctx, msg->msg_type, msg->buf, len - 1); +} + +static void anx7411_translate_payload(struct device *dev, __le32 *payload, + u32 *pdo, int nr, const char *type) +{ + int i; + + if (nr > PDO_MAX_OBJECTS) { + dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n", + nr, PDO_MAX_OBJECTS); + + return; + } + + for (i = 0; i < nr; i++) + payload[i] = cpu_to_le32(pdo[i]); +} + +static int anx7411_config(struct anx7411_data *ctx) +{ + struct device *dev = &ctx->spi_client->dev; + struct typec_params *typecp = &ctx->typec; + __le32 payload[PDO_MAX_OBJECTS]; + int ret; + + /* Config PD FW work under PD 2.0 */ + ret = anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20); + ret |= anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0, + UNSTRUCT_VDM_EN | DELAY_200MS | + VSAFE1 | FRS_EN); + ret |= anx7411_reg_write(ctx->spi_client, FW_CTRL_1, + AUTO_PD_EN | FORCE_SEND_RDO); + + /* Set VBUS current threshold */ + ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff); + ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03); + + /* Fix dongle compatible issue */ + ret |= anx7411_reg_write(ctx->tcpc_client, FW_PARAM, + anx7411_reg_read(ctx->tcpc_client, FW_PARAM) | + DONGLE_IOP); + ret |= anx7411_reg_write(ctx->spi_client, INT_MASK, 0); + + ret |= anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF); + if (ret) + return ret; + + if (typecp->caps_flags & HAS_SOURCE_CAP) { + anx7411_translate_payload(dev, payload, typecp->src_pdo, + typecp->src_pdo_nr, "source"); + anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload, + typecp->src_pdo_nr * 4); + anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity, + sizeof(snk_identity)); + anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps, + sizeof(dp_caps)); + } + + if (typecp->caps_flags & HAS_SINK_CAP) { + anx7411_translate_payload(dev, payload, typecp->sink_pdo, + typecp->sink_pdo_nr, "sink"); + anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload, + typecp->sink_pdo_nr * 4); + } + + if (typecp->caps_flags & HAS_SINK_WATT) { + if (typecp->sink_watt) { + ret |= anx7411_reg_write(ctx->spi_client, MAX_POWER, + typecp->sink_watt); + /* Set min power to 1W */ + ret |= anx7411_reg_write(ctx->spi_client, MIN_POWER, 2); + } + + if (typecp->sink_voltage) + ret |= anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE, + typecp->sink_voltage); + if (ret) + return ret; + } + + if (!typecp->caps_flags) + usleep_range(5000, 6000); + + ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER); + ctx->fw_subversion = anx7411_reg_read(ctx->spi_client, FW_SUBVER); + + return 0; +} + +static void anx7411_chip_standby(struct anx7411_data *ctx) +{ + int ret; + u8 cc1, cc2; + struct device *dev = &ctx->spi_client->dev; + + ret = anx7411_reg_write(ctx->spi_client, OCM_CTRL_0, + anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) | + OCM_RESET); + ret |= anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80); + /* Set TCPC to RD and DRP enable */ + cc1 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT; + cc2 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT; + ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_ROLE_CTRL, + TCPC_ROLE_CTRL_DRP | cc1 | cc2); + + /* Send DRP toggle command */ + ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, + TCPC_CMD_LOOK4CONNECTION); + + /* Send TCPC enter standby command */ + ret |= anx7411_reg_write(ctx->tcpc_client, + TCPC_COMMAND, TCPC_CMD_I2C_IDLE); + if (ret) + dev_err(dev, "Chip standby failed\n"); +} + +static void anx7411_work_func(struct work_struct *work) +{ + int ret; + u8 buf[STATUS_LEN]; + u8 int_change; /* Interrupt change */ + u8 int_status; /* Firmware status update */ + u8 alert0, alert1; /* Interrupt alert source */ + struct anx7411_data *ctx = container_of(work, struct anx7411_data, work); + struct device *dev = &ctx->spi_client->dev; + + mutex_lock(&ctx->lock); + + /* Read interrupt change status */ + ret = anx7411_reg_block_read(ctx->spi_client, INT_STS, STATUS_LEN, buf); + if (ret < 0) { + /* Power standby mode, just return */ + goto unlock; + } + int_change = buf[0]; + int_status = buf[1]; + + /* Read alert register */ + ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0, STATUS_LEN, buf); + if (ret < 0) + goto unlock; + + alert0 = buf[0]; + alert1 = buf[1]; + + /* Clear interrupt and alert status */ + ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0); + ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0); + ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1); + if (ret) + goto unlock; + + if (alert1 & INTP_POW_OFF) { + anx7411_partner_unregister_altmode(ctx); + if (anx7411_set_usb_role(ctx, USB_ROLE_NONE)) + dev_err(dev, "Set usb role\n"); + anx7411_unregister_partner(ctx); + ctx->psy_online = ANX7411_PSY_OFFLINE; + ctx->usb_type = POWER_SUPPLY_USB_TYPE_C; + ctx->typec.request_voltage = 0; + ctx->typec.request_current = 0; + power_supply_changed(ctx->psy); + anx7411_chip_standby(ctx); + goto unlock; + } + + if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) { + if (anx7411_config(ctx)) + dev_err(dev, "Config failed\n"); + if (anx7411_data_role_detect(ctx)) + dev_err(dev, "set PD data role\n"); + if (anx7411_power_role_detect(ctx)) + dev_err(dev, "set PD power role\n"); + anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C); + } + + if (alert0 & RECEIVED_MSG) + anx7411_process_cmd(ctx); + + ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE; + if (ctx->typec.data_role != ret) + if (anx7411_data_role_detect(ctx)) + dev_err(dev, "set PD data role\n"); + + ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE; + if (ctx->typec.power_role != ret) + if (anx7411_power_role_detect(ctx)) + dev_err(dev, "set PD power role\n"); + + if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE)) + anx7411_cc_status_detect(ctx); + +unlock: + mutex_unlock(&ctx->lock); +} + +static irqreturn_t anx7411_intr_isr(int irq, void *data) +{ + struct anx7411_data *ctx = (struct anx7411_data *)data; + + queue_work(ctx->workqueue, &ctx->work); + + return IRQ_HANDLED; +} + +static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx, + struct i2c_client *client) +{ + int i; + u8 spi_addr; + + for (i = 0; i < ARRAY_SIZE(anx7411_i2c_addr); i++) { + if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) { + spi_addr = anx7411_i2c_addr[i].spi_address >> 1; + ctx->spi_client = i2c_new_dummy_device(client->adapter, + spi_addr); + if (!IS_ERR(ctx->spi_client)) + return 0; + } + } + + dev_err(&client->dev, "unable to get SPI slave\n"); + return -ENOMEM; +} + +static void anx7411_port_unregister_altmodes(struct typec_altmode **adev) +{ + int i; + + for (i = 0; i < MAX_ALTMODE; i++) + if (adev[i]) { + typec_unregister_altmode(adev[i]); + adev[i] = NULL; + } +} + +static int anx7411_usb_mux_set(struct typec_mux_dev *mux, + struct typec_mux_state *state) +{ + struct anx7411_data *ctx = typec_mux_get_drvdata(mux); + struct device *dev = &ctx->spi_client->dev; + int has_dp; + + has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID && + state->alt->mode == USB_TYPEC_DP_MODE); + if (!has_dp) + dev_err(dev, "dp altmode not register\n"); + + return 0; +} + +static int anx7411_usb_set_orientation(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + /* No need set */ + + return 0; +} + +static int anx7411_register_switch(struct anx7411_data *ctx, + struct device *dev, + struct fwnode_handle *fwnode) +{ + struct typec_switch_desc sw_desc = { }; + + sw_desc.fwnode = fwnode; + sw_desc.drvdata = ctx; + sw_desc.name = fwnode_get_name(fwnode); + sw_desc.set = anx7411_usb_set_orientation; + + ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc); + if (IS_ERR(ctx->typec.typec_switch)) { + dev_err(dev, "switch register failed\n"); + return PTR_ERR(ctx->typec.typec_switch); + } + + return 0; +} + +static int anx7411_register_mux(struct anx7411_data *ctx, + struct device *dev, + struct fwnode_handle *fwnode) +{ + struct typec_mux_desc mux_desc = { }; + + mux_desc.fwnode = fwnode; + mux_desc.drvdata = ctx; + mux_desc.name = fwnode_get_name(fwnode); + mux_desc.set = anx7411_usb_mux_set; + + ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc); + if (IS_ERR(ctx->typec.typec_mux)) { + dev_err(dev, "mux register failed\n"); + return PTR_ERR(ctx->typec.typec_mux); + } + + return 0; +} + +static void anx7411_unregister_mux(struct anx7411_data *ctx) +{ + if (ctx->typec.typec_mux) { + typec_mux_unregister(ctx->typec.typec_mux); + ctx->typec.typec_mux = NULL; + } +} + +static void anx7411_unregister_switch(struct anx7411_data *ctx) +{ + if (ctx->typec.typec_switch) { + typec_switch_unregister(ctx->typec.typec_switch); + ctx->typec.typec_switch = NULL; + } +} + +static int anx7411_typec_switch_probe(struct anx7411_data *ctx, + struct device *dev) +{ + int ret; + struct device_node *node; + + node = of_get_child_by_name(dev->of_node, "orientation_switch"); + if (!node) + return 0; + + ret = anx7411_register_switch(ctx, dev, &node->fwnode); + if (ret) { + dev_err(dev, "failed register switch"); + return ret; + } + + node = of_get_child_by_name(dev->of_node, "mode_switch"); + if (!node) { + dev_err(dev, "no typec mux exist"); + ret = -ENODEV; + goto unregister_switch; + } + + ret = anx7411_register_mux(ctx, dev, &node->fwnode); + if (ret) { + dev_err(dev, "failed register mode switch"); + ret = -ENODEV; + goto unregister_switch; + } + + return 0; + +unregister_switch: + anx7411_unregister_switch(ctx); + + return ret; +} + +static int anx7411_typec_port_probe(struct anx7411_data *ctx, + struct device *dev) +{ + struct typec_capability *cap = &ctx->typec.caps; + struct typec_params *typecp = &ctx->typec; + struct fwnode_handle *fwnode; + const char *buf; + int ret, i; + + fwnode = device_get_named_child_node(dev, "connector"); + if (!fwnode) + return -EINVAL; + + ret = fwnode_property_read_string(fwnode, "power-role", &buf); + if (ret) { + dev_err(dev, "power-role not found: %d\n", ret); + return ret; + } + + ret = typec_find_port_power_role(buf); + if (ret < 0) + return ret; + cap->type = ret; + + ret = fwnode_property_read_string(fwnode, "data-role", &buf); + if (ret) { + dev_err(dev, "data-role not found: %d\n", ret); + return ret; + } + + ret = typec_find_port_data_role(buf); + if (ret < 0) + return ret; + cap->data = ret; + + ret = fwnode_property_read_string(fwnode, "try-power-role", &buf); + if (ret) { + dev_err(dev, "try-power-role not found: %d\n", ret); + return ret; + } + + ret = typec_find_power_role(buf); + if (ret < 0) + return ret; + cap->prefer_role = ret; + + /* Get source pdos */ + ret = fwnode_property_count_u32(fwnode, "source-pdos"); + if (ret > 0) { + typecp->src_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS); + ret = fwnode_property_read_u32_array(fwnode, "source-pdos", + typecp->src_pdo, + typecp->src_pdo_nr); + if (ret < 0) { + dev_err(dev, "source cap validate failed: %d\n", ret); + return -EINVAL; + } + + typecp->caps_flags |= HAS_SOURCE_CAP; + } + + ret = fwnode_property_count_u32(fwnode, "sink-pdos"); + if (ret > 0) { + typecp->sink_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS); + ret = fwnode_property_read_u32_array(fwnode, "sink-pdos", + typecp->sink_pdo, + typecp->sink_pdo_nr); + if (ret < 0) { + dev_err(dev, "sink cap validate failed: %d\n", ret); + return -EINVAL; + } + + for (i = 0; i < typecp->sink_pdo_nr; i++) { + ret = 0; + switch (pdo_type(typecp->sink_pdo[i])) { + case PDO_TYPE_FIXED: + ret = pdo_fixed_voltage(typecp->sink_pdo[i]); + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: + ret = pdo_max_voltage(typecp->sink_pdo[i]); + break; + case PDO_TYPE_APDO: + default: + ret = 0; + break; + } + + /* 100mv per unit */ + typecp->sink_voltage = max(5000, ret) / 100; + } + + typecp->caps_flags |= HAS_SINK_CAP; + } + + if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) { + typecp->sink_watt = ret / 500000; /* 500mw per unit */ + typecp->caps_flags |= HAS_SINK_WATT; + } + + cap->fwnode = fwnode; + + ctx->typec.role_sw = usb_role_switch_get(dev); + if (IS_ERR(ctx->typec.role_sw)) { + dev_err(dev, "USB role switch not found.\n"); + ctx->typec.role_sw = NULL; + } + + ctx->typec.port = typec_register_port(dev, cap); + if (IS_ERR(ctx->typec.port)) { + ret = PTR_ERR(ctx->typec.port); + ctx->typec.port = NULL; + dev_err(dev, "Failed to register type c port %d\n", ret); + return ret; + } + + typec_port_register_altmodes(ctx->typec.port, NULL, ctx, + ctx->typec.port_amode, + MAX_ALTMODE); + return 0; +} + +static int anx7411_typec_check_connection(struct anx7411_data *ctx) +{ + int ret; + + ret = anx7411_reg_read(ctx->spi_client, FW_VER); + if (ret < 0) + return 0; /* No device attached in typec port */ + + /* Clear interrupt and alert status */ + ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0); + ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF); + ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF); + if (ret) + return ret; + + ret = anx7411_cc_status_detect(ctx); + ret |= anx7411_power_role_detect(ctx); + ret |= anx7411_data_role_detect(ctx); + ret |= anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C); + if (ret) + return ret; + + ret = anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0); + ret |= anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0); + + return ret; +} + +static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev) +{ + struct anx7411_data *ctx = dev_get_drvdata(dev); + + mutex_lock(&ctx->lock); + + anx7411_partner_unregister_altmode(ctx); + + if (ctx->typec.partner) + anx7411_unregister_partner(ctx); + + mutex_unlock(&ctx->lock); + + return 0; +} + +static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev) +{ + struct anx7411_data *ctx = dev_get_drvdata(dev); + + mutex_lock(&ctx->lock); + /* Detect PD connection */ + if (anx7411_typec_check_connection(ctx)) + dev_err(dev, "check connection"); + + mutex_unlock(&ctx->lock); + + return 0; +} + +static const struct dev_pm_ops anx7411_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend, + anx7411_runtime_pm_resume, NULL) +}; + +static void anx7411_get_gpio_irq(struct anx7411_data *ctx) +{ + struct device *dev = &ctx->tcpc_client->dev; + + ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN); + if (IS_ERR_OR_NULL(ctx->intp_gpiod)) { + dev_err(dev, "no interrupt gpio property\n"); + return; + } + + ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod); + if (ctx->intp_irq < 0) + dev_err(dev, "failed to get GPIO IRQ\n"); +} + +static enum power_supply_usb_type anx7411_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_C, + POWER_SUPPLY_USB_TYPE_PD, + POWER_SUPPLY_USB_TYPE_PD_PPS, +}; + +static enum power_supply_property anx7411_psy_props[] = { + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static int anx7411_psy_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct anx7411_data *ctx = power_supply_get_drvdata(psy); + int ret = 0; + + if (psp == POWER_SUPPLY_PROP_ONLINE) + ctx->psy_online = val->intval; + else + ret = -EINVAL; + + power_supply_changed(ctx->psy); + return ret; +} + +static int anx7411_psy_prop_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + return psp == POWER_SUPPLY_PROP_ONLINE; +} + +static int anx7411_psy_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct anx7411_data *ctx = power_supply_get_drvdata(psy); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = ctx->usb_type; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = ctx->psy_online; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + val->intval = (ctx->psy_online) ? + ctx->typec.request_voltage * 1000 : 0; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_CURRENT_MAX: + val->intval = (ctx->psy_online) ? + ctx->typec.request_current * 1000 : 0; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int anx7411_psy_register(struct anx7411_data *ctx) +{ + struct power_supply_desc *psy_desc = &ctx->psy_desc; + struct power_supply_config psy_cfg = {}; + char *psy_name; + + psy_name = devm_kasprintf(ctx->dev, GFP_KERNEL, "anx7411-source-psy-%s", + dev_name(ctx->dev)); + if (!psy_name) + return -ENOMEM; + + psy_desc->name = psy_name; + psy_desc->type = POWER_SUPPLY_TYPE_USB; + psy_desc->usb_types = anx7411_psy_usb_types; + psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types); + psy_desc->properties = anx7411_psy_props; + psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props); + + psy_desc->get_property = anx7411_psy_get_prop; + psy_desc->set_property = anx7411_psy_set_prop; + psy_desc->property_is_writeable = anx7411_psy_prop_writeable; + + ctx->usb_type = POWER_SUPPLY_USB_TYPE_C; + ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg); + + if (IS_ERR(ctx->psy)) + dev_warn(ctx->dev, "unable to register psy\n"); + + return PTR_ERR_OR_ZERO(ctx->psy); +} + +static int anx7411_i2c_probe(struct i2c_client *client) +{ + struct anx7411_data *plat; + struct device *dev = &client->dev; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) + return -ENODEV; + + plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + + plat->tcpc_client = client; + i2c_set_clientdata(client, plat); + + mutex_init(&plat->lock); + + ret = anx7411_register_i2c_dummy_clients(plat, client); + if (ret) { + dev_err(dev, "fail to reserve I2C bus\n"); + return ret; + } + + ret = anx7411_typec_switch_probe(plat, dev); + if (ret) { + dev_err(dev, "fail to probe typec switch\n"); + goto free_i2c_dummy; + } + + ret = anx7411_typec_port_probe(plat, dev); + if (ret) { + dev_err(dev, "fail to probe typec property.\n"); + ret = -ENODEV; + goto free_typec_switch; + } + + plat->intp_irq = client->irq; + if (!client->irq) + anx7411_get_gpio_irq(plat); + + if (!plat->intp_irq) { + dev_err(dev, "fail to get interrupt IRQ\n"); + ret = -EINVAL; + goto free_typec_port; + } + + plat->dev = dev; + plat->psy_online = ANX7411_PSY_OFFLINE; + ret = anx7411_psy_register(plat); + if (ret) { + dev_err(dev, "register psy\n"); + goto free_typec_port; + } + + INIT_WORK(&plat->work, anx7411_work_func); + plat->workqueue = alloc_workqueue("anx7411_work", + WQ_FREEZABLE | + WQ_MEM_RECLAIM, + 1); + if (!plat->workqueue) { + dev_err(dev, "fail to create work queue\n"); + ret = -ENOMEM; + goto free_typec_port; + } + + ret = devm_request_threaded_irq(dev, plat->intp_irq, + NULL, anx7411_intr_isr, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "anx7411-intp", plat); + if (ret) { + dev_err(dev, "fail to request irq\n"); + goto free_wq; + } + + if (anx7411_typec_check_connection(plat)) + dev_err(dev, "check status\n"); + + pm_runtime_enable(dev); + + return 0; + +free_wq: + destroy_workqueue(plat->workqueue); + +free_typec_port: + typec_unregister_port(plat->typec.port); + anx7411_port_unregister_altmodes(plat->typec.port_amode); + +free_typec_switch: + anx7411_unregister_switch(plat); + anx7411_unregister_mux(plat); + +free_i2c_dummy: + i2c_unregister_device(plat->spi_client); + + return ret; +} + +static void anx7411_i2c_remove(struct i2c_client *client) +{ + struct anx7411_data *plat = i2c_get_clientdata(client); + + anx7411_partner_unregister_altmode(plat); + anx7411_unregister_partner(plat); + + if (plat->workqueue) + destroy_workqueue(plat->workqueue); + + if (plat->spi_client) + i2c_unregister_device(plat->spi_client); + + if (plat->typec.role_sw) + usb_role_switch_put(plat->typec.role_sw); + + anx7411_unregister_mux(plat); + + anx7411_unregister_switch(plat); + + if (plat->typec.port) + typec_unregister_port(plat->typec.port); + + anx7411_port_unregister_altmodes(plat->typec.port_amode); +} + +static const struct i2c_device_id anx7411_id[] = { + {"anx7411", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, anx7411_id); + +static const struct of_device_id anx_match_table[] = { + {.compatible = "analogix,anx7411",}, + {}, +}; + +static struct i2c_driver anx7411_driver = { + .driver = { + .name = "anx7411", + .of_match_table = anx_match_table, + .pm = &anx7411_pm_ops, + }, + .probe = anx7411_i2c_probe, + .remove = anx7411_i2c_remove, + + .id_table = anx7411_id, +}; + +module_i2c_driver(anx7411_driver); + +MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver"); +MODULE_AUTHOR("Xin Ji <xji@analogixsemi.com>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.1.5"); diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c new file mode 100644 index 0000000000..e95ec7e382 --- /dev/null +++ b/drivers/usb/typec/bus.c @@ -0,0 +1,449 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Bus for USB Type-C Alternate Modes + * + * Copyright (C) 2018 Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/usb/pd_vdo.h> + +#include "bus.h" +#include "class.h" +#include "mux.h" +#include "retimer.h" + +static inline int +typec_altmode_set_retimer(struct altmode *alt, unsigned long conf, void *data) +{ + struct typec_retimer_state state; + + if (!alt->retimer) + return 0; + + state.alt = &alt->adev; + state.mode = conf; + state.data = data; + + return typec_retimer_set(alt->retimer, &state); +} + +static inline int +typec_altmode_set_mux(struct altmode *alt, unsigned long conf, void *data) +{ + struct typec_mux_state state; + + if (!alt->mux) + return 0; + + state.alt = &alt->adev; + state.mode = conf; + state.data = data; + + return typec_mux_set(alt->mux, &state); +} + +/* Wrapper to set various Type-C port switches together. */ +static inline int +typec_altmode_set_switches(struct altmode *alt, unsigned long conf, void *data) +{ + int ret; + + ret = typec_altmode_set_retimer(alt, conf, data); + if (ret) + return ret; + + return typec_altmode_set_mux(alt, conf, data); +} + +static int typec_altmode_set_state(struct typec_altmode *adev, + unsigned long conf, void *data) +{ + bool is_port = is_typec_port(adev->dev.parent); + struct altmode *port_altmode; + + port_altmode = is_port ? to_altmode(adev) : to_altmode(adev)->partner; + + return typec_altmode_set_switches(port_altmode, conf, data); +} + +/* -------------------------------------------------------------------------- */ +/* Common API */ + +/** + * typec_altmode_notify - Communication between the OS and alternate mode driver + * @adev: Handle to the alternate mode + * @conf: Alternate mode specific configuration value + * @data: Alternate mode specific data + * + * The primary purpose for this function is to allow the alternate mode drivers + * to tell which pin configuration has been negotiated with the partner. That + * information will then be used for example to configure the muxes. + * Communication to the other direction is also possible, and low level device + * drivers can also send notifications to the alternate mode drivers. The actual + * communication will be specific for every SVID. + */ +int typec_altmode_notify(struct typec_altmode *adev, + unsigned long conf, void *data) +{ + bool is_port; + struct altmode *altmode; + struct altmode *partner; + int ret; + + if (!adev) + return 0; + + altmode = to_altmode(adev); + + if (!altmode->partner) + return -ENODEV; + + is_port = is_typec_port(adev->dev.parent); + partner = altmode->partner; + + ret = typec_altmode_set_switches(is_port ? altmode : partner, conf, data); + if (ret) + return ret; + + if (partner->adev.ops && partner->adev.ops->notify) + return partner->adev.ops->notify(&partner->adev, conf, data); + + return 0; +} +EXPORT_SYMBOL_GPL(typec_altmode_notify); + +/** + * typec_altmode_enter - Enter Mode + * @adev: The alternate mode + * @vdo: VDO for the Enter Mode command + * + * The alternate mode drivers use this function to enter mode. The port drivers + * use this to inform the alternate mode drivers that the partner has initiated + * Enter Mode command. If the alternate mode does not require VDO, @vdo must be + * NULL. + */ +int typec_altmode_enter(struct typec_altmode *adev, u32 *vdo) +{ + struct altmode *partner = to_altmode(adev)->partner; + struct typec_altmode *pdev = &partner->adev; + int ret; + + if (!adev || adev->active) + return 0; + + if (!pdev->ops || !pdev->ops->enter) + return -EOPNOTSUPP; + + if (is_typec_port(pdev->dev.parent) && !pdev->active) + return -EPERM; + + /* Moving to USB Safe State */ + ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL); + if (ret) + return ret; + + /* Enter Mode */ + return pdev->ops->enter(pdev, vdo); +} +EXPORT_SYMBOL_GPL(typec_altmode_enter); + +/** + * typec_altmode_exit - Exit Mode + * @adev: The alternate mode + * + * The partner of @adev has initiated Exit Mode command. + */ +int typec_altmode_exit(struct typec_altmode *adev) +{ + struct altmode *partner = to_altmode(adev)->partner; + struct typec_altmode *pdev = &partner->adev; + int ret; + + if (!adev || !adev->active) + return 0; + + if (!pdev->ops || !pdev->ops->exit) + return -EOPNOTSUPP; + + /* Moving to USB Safe State */ + ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL); + if (ret) + return ret; + + /* Exit Mode command */ + return pdev->ops->exit(pdev); +} +EXPORT_SYMBOL_GPL(typec_altmode_exit); + +/** + * typec_altmode_attention - Attention command + * @adev: The alternate mode + * @vdo: VDO for the Attention command + * + * Notifies the partner of @adev about Attention command. + */ +int typec_altmode_attention(struct typec_altmode *adev, u32 vdo) +{ + struct altmode *partner = to_altmode(adev)->partner; + struct typec_altmode *pdev; + + if (!partner) + return -ENODEV; + + pdev = &partner->adev; + + if (pdev->ops && pdev->ops->attention) + pdev->ops->attention(pdev, vdo); + + return 0; +} +EXPORT_SYMBOL_GPL(typec_altmode_attention); + +/** + * typec_altmode_vdm - Send Vendor Defined Messages (VDM) to the partner + * @adev: Alternate mode handle + * @header: VDM Header + * @vdo: Array of Vendor Defined Data Objects + * @count: Number of Data Objects + * + * The alternate mode drivers use this function for SVID specific communication + * with the partner. The port drivers use it to deliver the Structured VDMs + * received from the partners to the alternate mode drivers. + */ +int typec_altmode_vdm(struct typec_altmode *adev, + const u32 header, const u32 *vdo, int count) +{ + struct typec_altmode *pdev; + struct altmode *altmode; + + if (!adev) + return 0; + + altmode = to_altmode(adev); + + if (!altmode->partner) + return -ENODEV; + + pdev = &altmode->partner->adev; + + if (!pdev->ops || !pdev->ops->vdm) + return -EOPNOTSUPP; + + return pdev->ops->vdm(pdev, header, vdo, count); +} +EXPORT_SYMBOL_GPL(typec_altmode_vdm); + +const struct typec_altmode * +typec_altmode_get_partner(struct typec_altmode *adev) +{ + if (!adev || !to_altmode(adev)->partner) + return NULL; + + return &to_altmode(adev)->partner->adev; +} +EXPORT_SYMBOL_GPL(typec_altmode_get_partner); + +/* -------------------------------------------------------------------------- */ +/* API for the alternate mode drivers */ + +/** + * typec_altmode_get_plug - Find cable plug alternate mode + * @adev: Handle to partner alternate mode + * @index: Cable plug index + * + * Increment reference count for cable plug alternate mode device. Returns + * handle to the cable plug alternate mode, or NULL if none is found. + */ +struct typec_altmode *typec_altmode_get_plug(struct typec_altmode *adev, + enum typec_plug_index index) +{ + struct altmode *port = to_altmode(adev)->partner; + + if (port->plug[index]) { + get_device(&port->plug[index]->adev.dev); + return &port->plug[index]->adev; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(typec_altmode_get_plug); + +/** + * typec_altmode_put_plug - Decrement cable plug alternate mode reference count + * @plug: Handle to the cable plug alternate mode + */ +void typec_altmode_put_plug(struct typec_altmode *plug) +{ + if (plug) + put_device(&plug->dev); +} +EXPORT_SYMBOL_GPL(typec_altmode_put_plug); + +int __typec_altmode_register_driver(struct typec_altmode_driver *drv, + struct module *module) +{ + if (!drv->probe) + return -EINVAL; + + drv->driver.owner = module; + drv->driver.bus = &typec_bus; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(__typec_altmode_register_driver); + +void typec_altmode_unregister_driver(struct typec_altmode_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(typec_altmode_unregister_driver); + +/* -------------------------------------------------------------------------- */ +/* API for the port drivers */ + +/** + * typec_match_altmode - Match SVID and mode to an array of alternate modes + * @altmodes: Array of alternate modes + * @n: Number of elements in the array, or -1 for NULL terminated arrays + * @svid: Standard or Vendor ID to match with + * @mode: Mode to match with + * + * Return pointer to an alternate mode with SVID matching @svid, or NULL when no + * match is found. + */ +struct typec_altmode *typec_match_altmode(struct typec_altmode **altmodes, + size_t n, u16 svid, u8 mode) +{ + int i; + + for (i = 0; i < n; i++) { + if (!altmodes[i]) + break; + if (altmodes[i]->svid == svid && altmodes[i]->mode == mode) + return altmodes[i]; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(typec_match_altmode); + +/* -------------------------------------------------------------------------- */ + +static ssize_t +description_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct typec_altmode *alt = to_typec_altmode(dev); + + return sprintf(buf, "%s\n", alt->desc ? alt->desc : ""); +} +static DEVICE_ATTR_RO(description); + +static struct attribute *typec_attrs[] = { + &dev_attr_description.attr, + NULL +}; +ATTRIBUTE_GROUPS(typec); + +static int typec_match(struct device *dev, struct device_driver *driver) +{ + struct typec_altmode_driver *drv = to_altmode_driver(driver); + struct typec_altmode *altmode = to_typec_altmode(dev); + const struct typec_device_id *id; + + for (id = drv->id_table; id->svid; id++) + if (id->svid == altmode->svid && + (id->mode == TYPEC_ANY_MODE || id->mode == altmode->mode)) + return 1; + return 0; +} + +static int typec_uevent(const struct device *dev, struct kobj_uevent_env *env) +{ + const struct typec_altmode *altmode = to_typec_altmode(dev); + + if (add_uevent_var(env, "SVID=%04X", altmode->svid)) + return -ENOMEM; + + if (add_uevent_var(env, "MODE=%u", altmode->mode)) + return -ENOMEM; + + return add_uevent_var(env, "MODALIAS=typec:id%04Xm%02X", + altmode->svid, altmode->mode); +} + +static int typec_altmode_create_links(struct altmode *alt) +{ + struct device *port_dev = &alt->partner->adev.dev; + struct device *dev = &alt->adev.dev; + int err; + + err = sysfs_create_link(&dev->kobj, &port_dev->kobj, "port"); + if (err) + return err; + + err = sysfs_create_link(&port_dev->kobj, &dev->kobj, "partner"); + if (err) + sysfs_remove_link(&dev->kobj, "port"); + + return err; +} + +static void typec_altmode_remove_links(struct altmode *alt) +{ + sysfs_remove_link(&alt->partner->adev.dev.kobj, "partner"); + sysfs_remove_link(&alt->adev.dev.kobj, "port"); +} + +static int typec_probe(struct device *dev) +{ + struct typec_altmode_driver *drv = to_altmode_driver(dev->driver); + struct typec_altmode *adev = to_typec_altmode(dev); + struct altmode *altmode = to_altmode(adev); + int ret; + + /* Fail if the port does not support the alternate mode */ + if (!altmode->partner) + return -ENODEV; + + ret = typec_altmode_create_links(altmode); + if (ret) { + dev_warn(dev, "failed to create symlinks\n"); + return ret; + } + + ret = drv->probe(adev); + if (ret) + typec_altmode_remove_links(altmode); + + return ret; +} + +static void typec_remove(struct device *dev) +{ + struct typec_altmode_driver *drv = to_altmode_driver(dev->driver); + struct typec_altmode *adev = to_typec_altmode(dev); + struct altmode *altmode = to_altmode(adev); + + typec_altmode_remove_links(altmode); + + if (drv->remove) + drv->remove(to_typec_altmode(dev)); + + if (adev->active) { + WARN_ON(typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL)); + typec_altmode_update_active(adev, false); + } + + adev->desc = NULL; + adev->ops = NULL; +} + +const struct bus_type typec_bus = { + .name = "typec", + .dev_groups = typec_groups, + .match = typec_match, + .uevent = typec_uevent, + .probe = typec_probe, + .remove = typec_remove, +}; diff --git a/drivers/usb/typec/bus.h b/drivers/usb/typec/bus.h new file mode 100644 index 0000000000..643b8c8178 --- /dev/null +++ b/drivers/usb/typec/bus.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __USB_TYPEC_ALTMODE_H__ +#define __USB_TYPEC_ALTMODE_H__ + +#include <linux/usb/typec_altmode.h> + +struct bus_type; +struct typec_mux; +struct typec_retimer; + +struct altmode { + unsigned int id; + struct typec_altmode adev; + struct typec_mux *mux; + struct typec_retimer *retimer; + + enum typec_port_data roles; + + struct attribute *attrs[5]; + char group_name[8]; + struct attribute_group group; + const struct attribute_group *groups[2]; + + struct altmode *partner; + struct altmode *plug[2]; +}; + +#define to_altmode(d) container_of(d, struct altmode, adev) + +extern const struct bus_type typec_bus; +extern const struct device_type typec_altmode_dev_type; + +#define is_typec_altmode(_dev_) (_dev_->type == &typec_altmode_dev_type) + +#endif /* __USB_TYPEC_ALTMODE_H__ */ diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c new file mode 100644 index 0000000000..41382b1e29 --- /dev/null +++ b/drivers/usb/typec/class.c @@ -0,0 +1,2388 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB Type-C Connector Class + * + * Copyright (C) 2017, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/property.h> +#include <linux/slab.h> +#include <linux/usb/pd_vdo.h> +#include <linux/usb/typec_mux.h> +#include <linux/usb/typec_retimer.h> + +#include "bus.h" +#include "class.h" +#include "pd.h" + +static DEFINE_IDA(typec_index_ida); + +struct class typec_class = { + .name = "typec", +}; + +/* ------------------------------------------------------------------------- */ +/* Common attributes */ + +static const char * const typec_accessory_modes[] = { + [TYPEC_ACCESSORY_NONE] = "none", + [TYPEC_ACCESSORY_AUDIO] = "analog_audio", + [TYPEC_ACCESSORY_DEBUG] = "debug", +}; + +/* Product types defined in USB PD Specification R3.0 V2.0 */ +static const char * const product_type_ufp[8] = { + [IDH_PTYPE_NOT_UFP] = "not_ufp", + [IDH_PTYPE_HUB] = "hub", + [IDH_PTYPE_PERIPH] = "peripheral", + [IDH_PTYPE_PSD] = "psd", + [IDH_PTYPE_AMA] = "ama", +}; + +static const char * const product_type_dfp[8] = { + [IDH_PTYPE_NOT_DFP] = "not_dfp", + [IDH_PTYPE_DFP_HUB] = "hub", + [IDH_PTYPE_DFP_HOST] = "host", + [IDH_PTYPE_DFP_PB] = "power_brick", +}; + +static const char * const product_type_cable[8] = { + [IDH_PTYPE_NOT_CABLE] = "not_cable", + [IDH_PTYPE_PCABLE] = "passive", + [IDH_PTYPE_ACABLE] = "active", + [IDH_PTYPE_VPD] = "vpd", +}; + +static struct usb_pd_identity *get_pd_identity(struct device *dev) +{ + if (is_typec_partner(dev)) { + struct typec_partner *partner = to_typec_partner(dev); + + return partner->identity; + } else if (is_typec_cable(dev)) { + struct typec_cable *cable = to_typec_cable(dev); + + return cable->identity; + } + return NULL; +} + +static const char *get_pd_product_type(struct device *dev) +{ + struct typec_port *port = to_typec_port(dev->parent); + struct usb_pd_identity *id = get_pd_identity(dev); + const char *ptype = NULL; + + if (is_typec_partner(dev)) { + if (!id) + return NULL; + + if (port->data_role == TYPEC_HOST) + ptype = product_type_ufp[PD_IDH_PTYPE(id->id_header)]; + else + ptype = product_type_dfp[PD_IDH_DFP_PTYPE(id->id_header)]; + } else if (is_typec_cable(dev)) { + if (id) + ptype = product_type_cable[PD_IDH_PTYPE(id->id_header)]; + else + ptype = to_typec_cable(dev)->active ? + product_type_cable[IDH_PTYPE_ACABLE] : + product_type_cable[IDH_PTYPE_PCABLE]; + } + + return ptype; +} + +static ssize_t id_header_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sprintf(buf, "0x%08x\n", id->id_header); +} +static DEVICE_ATTR_RO(id_header); + +static ssize_t cert_stat_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sprintf(buf, "0x%08x\n", id->cert_stat); +} +static DEVICE_ATTR_RO(cert_stat); + +static ssize_t product_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sprintf(buf, "0x%08x\n", id->product); +} +static DEVICE_ATTR_RO(product); + +static ssize_t product_type_vdo1_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sysfs_emit(buf, "0x%08x\n", id->vdo[0]); +} +static DEVICE_ATTR_RO(product_type_vdo1); + +static ssize_t product_type_vdo2_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sysfs_emit(buf, "0x%08x\n", id->vdo[1]); +} +static DEVICE_ATTR_RO(product_type_vdo2); + +static ssize_t product_type_vdo3_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sysfs_emit(buf, "0x%08x\n", id->vdo[2]); +} +static DEVICE_ATTR_RO(product_type_vdo3); + +static struct attribute *usb_pd_id_attrs[] = { + &dev_attr_id_header.attr, + &dev_attr_cert_stat.attr, + &dev_attr_product.attr, + &dev_attr_product_type_vdo1.attr, + &dev_attr_product_type_vdo2.attr, + &dev_attr_product_type_vdo3.attr, + NULL +}; + +static const struct attribute_group usb_pd_id_group = { + .name = "identity", + .attrs = usb_pd_id_attrs, +}; + +static const struct attribute_group *usb_pd_id_groups[] = { + &usb_pd_id_group, + NULL, +}; + +static void typec_product_type_notify(struct device *dev) +{ + char *envp[2] = { }; + const char *ptype; + + ptype = get_pd_product_type(dev); + if (!ptype) + return; + + sysfs_notify(&dev->kobj, NULL, "type"); + + envp[0] = kasprintf(GFP_KERNEL, "PRODUCT_TYPE=%s", ptype); + if (!envp[0]) + return; + + kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp); + kfree(envp[0]); +} + +static void typec_report_identity(struct device *dev) +{ + sysfs_notify(&dev->kobj, "identity", "id_header"); + sysfs_notify(&dev->kobj, "identity", "cert_stat"); + sysfs_notify(&dev->kobj, "identity", "product"); + sysfs_notify(&dev->kobj, "identity", "product_type_vdo1"); + sysfs_notify(&dev->kobj, "identity", "product_type_vdo2"); + sysfs_notify(&dev->kobj, "identity", "product_type_vdo3"); + typec_product_type_notify(dev); +} + +static ssize_t +type_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + const char *ptype; + + ptype = get_pd_product_type(dev); + if (!ptype) + return 0; + + return sysfs_emit(buf, "%s\n", ptype); +} +static DEVICE_ATTR_RO(type); + +static ssize_t usb_power_delivery_revision_show(struct device *dev, + struct device_attribute *attr, + char *buf); +static DEVICE_ATTR_RO(usb_power_delivery_revision); + +/* ------------------------------------------------------------------------- */ +/* Alternate Modes */ + +static int altmode_match(struct device *dev, void *data) +{ + struct typec_altmode *adev = to_typec_altmode(dev); + struct typec_device_id *id = data; + + if (!is_typec_altmode(dev)) + return 0; + + return ((adev->svid == id->svid) && (adev->mode == id->mode)); +} + +static void typec_altmode_set_partner(struct altmode *altmode) +{ + struct typec_altmode *adev = &altmode->adev; + struct typec_device_id id = { adev->svid, adev->mode, }; + struct typec_port *port = typec_altmode2port(adev); + struct altmode *partner; + struct device *dev; + + dev = device_find_child(&port->dev, &id, altmode_match); + if (!dev) + return; + + /* Bind the port alt mode to the partner/plug alt mode. */ + partner = to_altmode(to_typec_altmode(dev)); + altmode->partner = partner; + + /* Bind the partner/plug alt mode to the port alt mode. */ + if (is_typec_plug(adev->dev.parent)) { + struct typec_plug *plug = to_typec_plug(adev->dev.parent); + + partner->plug[plug->index] = altmode; + } else { + partner->partner = altmode; + } +} + +static void typec_altmode_put_partner(struct altmode *altmode) +{ + struct altmode *partner = altmode->partner; + struct typec_altmode *adev; + struct typec_altmode *partner_adev; + + if (!partner) + return; + + adev = &altmode->adev; + partner_adev = &partner->adev; + + if (is_typec_plug(adev->dev.parent)) { + struct typec_plug *plug = to_typec_plug(adev->dev.parent); + + partner->plug[plug->index] = NULL; + } else { + partner->partner = NULL; + } + put_device(&partner_adev->dev); +} + +/** + * typec_altmode_update_active - Report Enter/Exit mode + * @adev: Handle to the alternate mode + * @active: True when the mode has been entered + * + * If a partner or cable plug executes Enter/Exit Mode command successfully, the + * drivers use this routine to report the updated state of the mode. + */ +void typec_altmode_update_active(struct typec_altmode *adev, bool active) +{ + char dir[6]; + + if (adev->active == active) + return; + + if (!is_typec_port(adev->dev.parent) && adev->dev.driver) { + if (!active) + module_put(adev->dev.driver->owner); + else + WARN_ON(!try_module_get(adev->dev.driver->owner)); + } + + adev->active = active; + snprintf(dir, sizeof(dir), "mode%d", adev->mode); + sysfs_notify(&adev->dev.kobj, dir, "active"); + sysfs_notify(&adev->dev.kobj, NULL, "active"); + kobject_uevent(&adev->dev.kobj, KOBJ_CHANGE); +} +EXPORT_SYMBOL_GPL(typec_altmode_update_active); + +/** + * typec_altmode2port - Alternate Mode to USB Type-C port + * @alt: The Alternate Mode + * + * Returns handle to the port that a cable plug or partner with @alt is + * connected to. + */ +struct typec_port *typec_altmode2port(struct typec_altmode *alt) +{ + if (is_typec_plug(alt->dev.parent)) + return to_typec_port(alt->dev.parent->parent->parent); + if (is_typec_partner(alt->dev.parent)) + return to_typec_port(alt->dev.parent->parent); + if (is_typec_port(alt->dev.parent)) + return to_typec_port(alt->dev.parent); + + return NULL; +} +EXPORT_SYMBOL_GPL(typec_altmode2port); + +static ssize_t +vdo_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct typec_altmode *alt = to_typec_altmode(dev); + + return sprintf(buf, "0x%08x\n", alt->vdo); +} +static DEVICE_ATTR_RO(vdo); + +static ssize_t +description_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct typec_altmode *alt = to_typec_altmode(dev); + + return sprintf(buf, "%s\n", alt->desc ? alt->desc : ""); +} +static DEVICE_ATTR_RO(description); + +static ssize_t +active_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct typec_altmode *alt = to_typec_altmode(dev); + + return sprintf(buf, "%s\n", alt->active ? "yes" : "no"); +} + +static ssize_t active_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_altmode *adev = to_typec_altmode(dev); + struct altmode *altmode = to_altmode(adev); + bool enter; + int ret; + + ret = kstrtobool(buf, &enter); + if (ret) + return ret; + + if (adev->active == enter) + return size; + + if (is_typec_port(adev->dev.parent)) { + typec_altmode_update_active(adev, enter); + + /* Make sure that the partner exits the mode before disabling */ + if (altmode->partner && !enter && altmode->partner->adev.active) + typec_altmode_exit(&altmode->partner->adev); + } else if (altmode->partner) { + if (enter && !altmode->partner->adev.active) { + dev_warn(dev, "port has the mode disabled\n"); + return -EPERM; + } + } + + /* Note: If there is no driver, the mode will not be entered */ + if (adev->ops && adev->ops->activate) { + ret = adev->ops->activate(adev, enter); + if (ret) + return ret; + } + + return size; +} +static DEVICE_ATTR_RW(active); + +static ssize_t +supported_roles_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct altmode *alt = to_altmode(to_typec_altmode(dev)); + ssize_t ret; + + switch (alt->roles) { + case TYPEC_PORT_SRC: + ret = sprintf(buf, "source\n"); + break; + case TYPEC_PORT_SNK: + ret = sprintf(buf, "sink\n"); + break; + case TYPEC_PORT_DRP: + default: + ret = sprintf(buf, "source sink\n"); + break; + } + return ret; +} +static DEVICE_ATTR_RO(supported_roles); + +static ssize_t +mode_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct typec_altmode *adev = to_typec_altmode(dev); + + return sprintf(buf, "%u\n", adev->mode); +} +static DEVICE_ATTR_RO(mode); + +static ssize_t +svid_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct typec_altmode *adev = to_typec_altmode(dev); + + return sprintf(buf, "%04x\n", adev->svid); +} +static DEVICE_ATTR_RO(svid); + +static struct attribute *typec_altmode_attrs[] = { + &dev_attr_active.attr, + &dev_attr_mode.attr, + &dev_attr_svid.attr, + &dev_attr_vdo.attr, + NULL +}; + +static umode_t typec_altmode_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct typec_altmode *adev = to_typec_altmode(kobj_to_dev(kobj)); + + if (attr == &dev_attr_active.attr) + if (!adev->ops || !adev->ops->activate) + return 0444; + + return attr->mode; +} + +static const struct attribute_group typec_altmode_group = { + .is_visible = typec_altmode_attr_is_visible, + .attrs = typec_altmode_attrs, +}; + +static const struct attribute_group *typec_altmode_groups[] = { + &typec_altmode_group, + NULL +}; + +static int altmode_id_get(struct device *dev) +{ + struct ida *ids; + + if (is_typec_partner(dev)) + ids = &to_typec_partner(dev)->mode_ids; + else if (is_typec_plug(dev)) + ids = &to_typec_plug(dev)->mode_ids; + else + ids = &to_typec_port(dev)->mode_ids; + + return ida_simple_get(ids, 0, 0, GFP_KERNEL); +} + +static void altmode_id_remove(struct device *dev, int id) +{ + struct ida *ids; + + if (is_typec_partner(dev)) + ids = &to_typec_partner(dev)->mode_ids; + else if (is_typec_plug(dev)) + ids = &to_typec_plug(dev)->mode_ids; + else + ids = &to_typec_port(dev)->mode_ids; + + ida_simple_remove(ids, id); +} + +static void typec_altmode_release(struct device *dev) +{ + struct altmode *alt = to_altmode(to_typec_altmode(dev)); + + if (!is_typec_port(dev->parent)) + typec_altmode_put_partner(alt); + + altmode_id_remove(alt->adev.dev.parent, alt->id); + kfree(alt); +} + +const struct device_type typec_altmode_dev_type = { + .name = "typec_alternate_mode", + .groups = typec_altmode_groups, + .release = typec_altmode_release, +}; + +static struct typec_altmode * +typec_register_altmode(struct device *parent, + const struct typec_altmode_desc *desc) +{ + unsigned int id = altmode_id_get(parent); + bool is_port = is_typec_port(parent); + struct altmode *alt; + int ret; + + alt = kzalloc(sizeof(*alt), GFP_KERNEL); + if (!alt) { + altmode_id_remove(parent, id); + return ERR_PTR(-ENOMEM); + } + + alt->adev.svid = desc->svid; + alt->adev.mode = desc->mode; + alt->adev.vdo = desc->vdo; + alt->roles = desc->roles; + alt->id = id; + + alt->attrs[0] = &dev_attr_vdo.attr; + alt->attrs[1] = &dev_attr_description.attr; + alt->attrs[2] = &dev_attr_active.attr; + + if (is_port) { + alt->attrs[3] = &dev_attr_supported_roles.attr; + alt->adev.active = true; /* Enabled by default */ + } + + sprintf(alt->group_name, "mode%d", desc->mode); + alt->group.name = alt->group_name; + alt->group.attrs = alt->attrs; + alt->groups[0] = &alt->group; + + alt->adev.dev.parent = parent; + alt->adev.dev.groups = alt->groups; + alt->adev.dev.type = &typec_altmode_dev_type; + dev_set_name(&alt->adev.dev, "%s.%u", dev_name(parent), id); + + /* Link partners and plugs with the ports */ + if (!is_port) + typec_altmode_set_partner(alt); + + /* The partners are bind to drivers */ + if (is_typec_partner(parent)) + alt->adev.dev.bus = &typec_bus; + + /* Plug alt modes need a class to generate udev events. */ + if (is_typec_plug(parent)) + alt->adev.dev.class = &typec_class; + + ret = device_register(&alt->adev.dev); + if (ret) { + dev_err(parent, "failed to register alternate mode (%d)\n", + ret); + put_device(&alt->adev.dev); + return ERR_PTR(ret); + } + + return &alt->adev; +} + +/** + * typec_unregister_altmode - Unregister Alternate Mode + * @adev: The alternate mode to be unregistered + * + * Unregister device created with typec_partner_register_altmode(), + * typec_plug_register_altmode() or typec_port_register_altmode(). + */ +void typec_unregister_altmode(struct typec_altmode *adev) +{ + if (IS_ERR_OR_NULL(adev)) + return; + typec_retimer_put(to_altmode(adev)->retimer); + typec_mux_put(to_altmode(adev)->mux); + device_unregister(&adev->dev); +} +EXPORT_SYMBOL_GPL(typec_unregister_altmode); + +/* ------------------------------------------------------------------------- */ +/* Type-C Partners */ + +static ssize_t accessory_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_partner *p = to_typec_partner(dev); + + return sprintf(buf, "%s\n", typec_accessory_modes[p->accessory]); +} +static DEVICE_ATTR_RO(accessory_mode); + +static ssize_t supports_usb_power_delivery_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_partner *p = to_typec_partner(dev); + + return sprintf(buf, "%s\n", p->usb_pd ? "yes" : "no"); +} +static DEVICE_ATTR_RO(supports_usb_power_delivery); + +static ssize_t number_of_alternate_modes_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct typec_partner *partner; + struct typec_plug *plug; + int num_altmodes; + + if (is_typec_partner(dev)) { + partner = to_typec_partner(dev); + num_altmodes = partner->num_altmodes; + } else if (is_typec_plug(dev)) { + plug = to_typec_plug(dev); + num_altmodes = plug->num_altmodes; + } else { + return 0; + } + + return sysfs_emit(buf, "%d\n", num_altmodes); +} +static DEVICE_ATTR_RO(number_of_alternate_modes); + +static struct attribute *typec_partner_attrs[] = { + &dev_attr_accessory_mode.attr, + &dev_attr_supports_usb_power_delivery.attr, + &dev_attr_number_of_alternate_modes.attr, + &dev_attr_type.attr, + &dev_attr_usb_power_delivery_revision.attr, + NULL +}; + +static umode_t typec_partner_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) +{ + struct typec_partner *partner = to_typec_partner(kobj_to_dev(kobj)); + + if (attr == &dev_attr_number_of_alternate_modes.attr) { + if (partner->num_altmodes < 0) + return 0; + } + + if (attr == &dev_attr_type.attr) + if (!get_pd_product_type(kobj_to_dev(kobj))) + return 0; + + return attr->mode; +} + +static const struct attribute_group typec_partner_group = { + .is_visible = typec_partner_attr_is_visible, + .attrs = typec_partner_attrs +}; + +static const struct attribute_group *typec_partner_groups[] = { + &typec_partner_group, + NULL +}; + +static void typec_partner_release(struct device *dev) +{ + struct typec_partner *partner = to_typec_partner(dev); + + ida_destroy(&partner->mode_ids); + kfree(partner); +} + +const struct device_type typec_partner_dev_type = { + .name = "typec_partner", + .groups = typec_partner_groups, + .release = typec_partner_release, +}; + +/** + * typec_partner_set_identity - Report result from Discover Identity command + * @partner: The partner updated identity values + * + * This routine is used to report that the result of Discover Identity USB power + * delivery command has become available. + */ +int typec_partner_set_identity(struct typec_partner *partner) +{ + if (!partner->identity) + return -EINVAL; + + typec_report_identity(&partner->dev); + return 0; +} +EXPORT_SYMBOL_GPL(typec_partner_set_identity); + +/** + * typec_partner_set_pd_revision - Set the PD revision supported by the partner + * @partner: The partner to be updated. + * @pd_revision: USB Power Delivery Specification Revision supported by partner + * + * This routine is used to report that the PD revision of the port partner has + * become available. + */ +void typec_partner_set_pd_revision(struct typec_partner *partner, u16 pd_revision) +{ + if (partner->pd_revision == pd_revision) + return; + + partner->pd_revision = pd_revision; + sysfs_notify(&partner->dev.kobj, NULL, "usb_power_delivery_revision"); + if (pd_revision != 0 && !partner->usb_pd) { + partner->usb_pd = 1; + sysfs_notify(&partner->dev.kobj, NULL, + "supports_usb_power_delivery"); + } + kobject_uevent(&partner->dev.kobj, KOBJ_CHANGE); +} +EXPORT_SYMBOL_GPL(typec_partner_set_pd_revision); + +/** + * typec_partner_set_usb_power_delivery - Declare USB Power Delivery Contract. + * @partner: The partner device. + * @pd: The USB PD instance. + * + * This routine can be used to declare USB Power Delivery Contract with @partner + * by linking @partner to @pd which contains the objects that were used during the + * negotiation of the contract. + * + * If @pd is NULL, the link is removed and the contract with @partner has ended. + */ +int typec_partner_set_usb_power_delivery(struct typec_partner *partner, + struct usb_power_delivery *pd) +{ + int ret; + + if (IS_ERR_OR_NULL(partner) || partner->pd == pd) + return 0; + + if (pd) { + ret = usb_power_delivery_link_device(pd, &partner->dev); + if (ret) + return ret; + } else { + usb_power_delivery_unlink_device(partner->pd, &partner->dev); + } + + partner->pd = pd; + + return 0; +} +EXPORT_SYMBOL_GPL(typec_partner_set_usb_power_delivery); + +/** + * typec_partner_set_num_altmodes - Set the number of available partner altmodes + * @partner: The partner to be updated. + * @num_altmodes: The number of altmodes we want to specify as available. + * + * This routine is used to report the number of alternate modes supported by the + * partner. This value is *not* enforced in alternate mode registration routines. + * + * @partner.num_altmodes is set to -1 on partner registration, denoting that + * a valid value has not been set for it yet. + * + * Returns 0 on success or negative error number on failure. + */ +int typec_partner_set_num_altmodes(struct typec_partner *partner, int num_altmodes) +{ + int ret; + + if (num_altmodes < 0) + return -EINVAL; + + partner->num_altmodes = num_altmodes; + ret = sysfs_update_group(&partner->dev.kobj, &typec_partner_group); + if (ret < 0) + return ret; + + sysfs_notify(&partner->dev.kobj, NULL, "number_of_alternate_modes"); + kobject_uevent(&partner->dev.kobj, KOBJ_CHANGE); + + return 0; +} +EXPORT_SYMBOL_GPL(typec_partner_set_num_altmodes); + +/** + * typec_partner_register_altmode - Register USB Type-C Partner Alternate Mode + * @partner: USB Type-C Partner that supports the alternate mode + * @desc: Description of the alternate mode + * + * This routine is used to register each alternate mode individually that + * @partner has listed in response to Discover SVIDs command. The modes for a + * SVID listed in response to Discover Modes command need to be listed in an + * array in @desc. + * + * Returns handle to the alternate mode on success or ERR_PTR on failure. + */ +struct typec_altmode * +typec_partner_register_altmode(struct typec_partner *partner, + const struct typec_altmode_desc *desc) +{ + return typec_register_altmode(&partner->dev, desc); +} +EXPORT_SYMBOL_GPL(typec_partner_register_altmode); + +/** + * typec_partner_set_svdm_version - Set negotiated Structured VDM (SVDM) Version + * @partner: USB Type-C Partner that supports SVDM + * @svdm_version: Negotiated SVDM Version + * + * This routine is used to save the negotiated SVDM Version. + */ +void typec_partner_set_svdm_version(struct typec_partner *partner, + enum usb_pd_svdm_ver svdm_version) +{ + partner->svdm_version = svdm_version; +} +EXPORT_SYMBOL_GPL(typec_partner_set_svdm_version); + +/** + * typec_partner_usb_power_delivery_register - Register Type-C partner USB Power Delivery Support + * @partner: Type-C partner device. + * @desc: Description of the USB PD contract. + * + * This routine is a wrapper around usb_power_delivery_register(). It registers + * USB Power Delivery Capabilities for a Type-C partner device. Specifically, + * it sets the Type-C partner device as a parent for the resulting USB Power Delivery object. + * + * Returns handle to struct usb_power_delivery or ERR_PTR. + */ +struct usb_power_delivery * +typec_partner_usb_power_delivery_register(struct typec_partner *partner, + struct usb_power_delivery_desc *desc) +{ + return usb_power_delivery_register(&partner->dev, desc); +} +EXPORT_SYMBOL_GPL(typec_partner_usb_power_delivery_register); + +/** + * typec_register_partner - Register a USB Type-C Partner + * @port: The USB Type-C Port the partner is connected to + * @desc: Description of the partner + * + * Registers a device for USB Type-C Partner described in @desc. + * + * Returns handle to the partner on success or ERR_PTR on failure. + */ +struct typec_partner *typec_register_partner(struct typec_port *port, + struct typec_partner_desc *desc) +{ + struct typec_partner *partner; + int ret; + + partner = kzalloc(sizeof(*partner), GFP_KERNEL); + if (!partner) + return ERR_PTR(-ENOMEM); + + ida_init(&partner->mode_ids); + partner->usb_pd = desc->usb_pd; + partner->accessory = desc->accessory; + partner->num_altmodes = -1; + partner->pd_revision = desc->pd_revision; + partner->svdm_version = port->cap->svdm_version; + + if (desc->identity) { + /* + * Creating directory for the identity only if the driver is + * able to provide data to it. + */ + partner->dev.groups = usb_pd_id_groups; + partner->identity = desc->identity; + } + + partner->dev.class = &typec_class; + partner->dev.parent = &port->dev; + partner->dev.type = &typec_partner_dev_type; + dev_set_name(&partner->dev, "%s-partner", dev_name(&port->dev)); + + ret = device_register(&partner->dev); + if (ret) { + dev_err(&port->dev, "failed to register partner (%d)\n", ret); + put_device(&partner->dev); + return ERR_PTR(ret); + } + + return partner; +} +EXPORT_SYMBOL_GPL(typec_register_partner); + +/** + * typec_unregister_partner - Unregister a USB Type-C Partner + * @partner: The partner to be unregistered + * + * Unregister device created with typec_register_partner(). + */ +void typec_unregister_partner(struct typec_partner *partner) +{ + if (!IS_ERR_OR_NULL(partner)) + device_unregister(&partner->dev); +} +EXPORT_SYMBOL_GPL(typec_unregister_partner); + +/* ------------------------------------------------------------------------- */ +/* Type-C Cable Plugs */ + +static void typec_plug_release(struct device *dev) +{ + struct typec_plug *plug = to_typec_plug(dev); + + ida_destroy(&plug->mode_ids); + kfree(plug); +} + +static struct attribute *typec_plug_attrs[] = { + &dev_attr_number_of_alternate_modes.attr, + NULL +}; + +static umode_t typec_plug_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) +{ + struct typec_plug *plug = to_typec_plug(kobj_to_dev(kobj)); + + if (attr == &dev_attr_number_of_alternate_modes.attr) { + if (plug->num_altmodes < 0) + return 0; + } + + return attr->mode; +} + +static const struct attribute_group typec_plug_group = { + .is_visible = typec_plug_attr_is_visible, + .attrs = typec_plug_attrs +}; + +static const struct attribute_group *typec_plug_groups[] = { + &typec_plug_group, + NULL +}; + +const struct device_type typec_plug_dev_type = { + .name = "typec_plug", + .groups = typec_plug_groups, + .release = typec_plug_release, +}; + +/** + * typec_plug_set_num_altmodes - Set the number of available plug altmodes + * @plug: The plug to be updated. + * @num_altmodes: The number of altmodes we want to specify as available. + * + * This routine is used to report the number of alternate modes supported by the + * plug. This value is *not* enforced in alternate mode registration routines. + * + * @plug.num_altmodes is set to -1 on plug registration, denoting that + * a valid value has not been set for it yet. + * + * Returns 0 on success or negative error number on failure. + */ +int typec_plug_set_num_altmodes(struct typec_plug *plug, int num_altmodes) +{ + int ret; + + if (num_altmodes < 0) + return -EINVAL; + + plug->num_altmodes = num_altmodes; + ret = sysfs_update_group(&plug->dev.kobj, &typec_plug_group); + if (ret < 0) + return ret; + + sysfs_notify(&plug->dev.kobj, NULL, "number_of_alternate_modes"); + kobject_uevent(&plug->dev.kobj, KOBJ_CHANGE); + + return 0; +} +EXPORT_SYMBOL_GPL(typec_plug_set_num_altmodes); + +/** + * typec_plug_register_altmode - Register USB Type-C Cable Plug Alternate Mode + * @plug: USB Type-C Cable Plug that supports the alternate mode + * @desc: Description of the alternate mode + * + * This routine is used to register each alternate mode individually that @plug + * has listed in response to Discover SVIDs command. The modes for a SVID that + * the plug lists in response to Discover Modes command need to be listed in an + * array in @desc. + * + * Returns handle to the alternate mode on success or ERR_PTR on failure. + */ +struct typec_altmode * +typec_plug_register_altmode(struct typec_plug *plug, + const struct typec_altmode_desc *desc) +{ + return typec_register_altmode(&plug->dev, desc); +} +EXPORT_SYMBOL_GPL(typec_plug_register_altmode); + +/** + * typec_register_plug - Register a USB Type-C Cable Plug + * @cable: USB Type-C Cable with the plug + * @desc: Description of the cable plug + * + * Registers a device for USB Type-C Cable Plug described in @desc. A USB Type-C + * Cable Plug represents a plug with electronics in it that can response to USB + * Power Delivery SOP Prime or SOP Double Prime packages. + * + * Returns handle to the cable plug on success or ERR_PTR on failure. + */ +struct typec_plug *typec_register_plug(struct typec_cable *cable, + struct typec_plug_desc *desc) +{ + struct typec_plug *plug; + char name[8]; + int ret; + + plug = kzalloc(sizeof(*plug), GFP_KERNEL); + if (!plug) + return ERR_PTR(-ENOMEM); + + sprintf(name, "plug%d", desc->index); + + ida_init(&plug->mode_ids); + plug->num_altmodes = -1; + plug->index = desc->index; + plug->dev.class = &typec_class; + plug->dev.parent = &cable->dev; + plug->dev.type = &typec_plug_dev_type; + dev_set_name(&plug->dev, "%s-%s", dev_name(cable->dev.parent), name); + + ret = device_register(&plug->dev); + if (ret) { + dev_err(&cable->dev, "failed to register plug (%d)\n", ret); + put_device(&plug->dev); + return ERR_PTR(ret); + } + + return plug; +} +EXPORT_SYMBOL_GPL(typec_register_plug); + +/** + * typec_unregister_plug - Unregister a USB Type-C Cable Plug + * @plug: The cable plug to be unregistered + * + * Unregister device created with typec_register_plug(). + */ +void typec_unregister_plug(struct typec_plug *plug) +{ + if (!IS_ERR_OR_NULL(plug)) + device_unregister(&plug->dev); +} +EXPORT_SYMBOL_GPL(typec_unregister_plug); + +/* Type-C Cables */ + +static const char * const typec_plug_types[] = { + [USB_PLUG_NONE] = "unknown", + [USB_PLUG_TYPE_A] = "type-a", + [USB_PLUG_TYPE_B] = "type-b", + [USB_PLUG_TYPE_C] = "type-c", + [USB_PLUG_CAPTIVE] = "captive", +}; + +static ssize_t plug_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct typec_cable *cable = to_typec_cable(dev); + + return sprintf(buf, "%s\n", typec_plug_types[cable->type]); +} +static DEVICE_ATTR_RO(plug_type); + +static struct attribute *typec_cable_attrs[] = { + &dev_attr_type.attr, + &dev_attr_plug_type.attr, + &dev_attr_usb_power_delivery_revision.attr, + NULL +}; +ATTRIBUTE_GROUPS(typec_cable); + +static void typec_cable_release(struct device *dev) +{ + struct typec_cable *cable = to_typec_cable(dev); + + kfree(cable); +} + +const struct device_type typec_cable_dev_type = { + .name = "typec_cable", + .groups = typec_cable_groups, + .release = typec_cable_release, +}; + +static int cable_match(struct device *dev, void *data) +{ + return is_typec_cable(dev); +} + +/** + * typec_cable_get - Get a reference to the USB Type-C cable + * @port: The USB Type-C Port the cable is connected to + * + * The caller must decrement the reference count with typec_cable_put() after + * use. + */ +struct typec_cable *typec_cable_get(struct typec_port *port) +{ + struct device *dev; + + dev = device_find_child(&port->dev, NULL, cable_match); + if (!dev) + return NULL; + + return to_typec_cable(dev); +} +EXPORT_SYMBOL_GPL(typec_cable_get); + +/** + * typec_cable_put - Decrement the reference count on USB Type-C cable + * @cable: The USB Type-C cable + */ +void typec_cable_put(struct typec_cable *cable) +{ + put_device(&cable->dev); +} +EXPORT_SYMBOL_GPL(typec_cable_put); + +/** + * typec_cable_is_active - Check is the USB Type-C cable active or passive + * @cable: The USB Type-C Cable + * + * Return 1 if the cable is active or 0 if it's passive. + */ +int typec_cable_is_active(struct typec_cable *cable) +{ + return cable->active; +} +EXPORT_SYMBOL_GPL(typec_cable_is_active); + +/** + * typec_cable_set_identity - Report result from Discover Identity command + * @cable: The cable updated identity values + * + * This routine is used to report that the result of Discover Identity USB power + * delivery command has become available. + */ +int typec_cable_set_identity(struct typec_cable *cable) +{ + if (!cable->identity) + return -EINVAL; + + typec_report_identity(&cable->dev); + return 0; +} +EXPORT_SYMBOL_GPL(typec_cable_set_identity); + +/** + * typec_register_cable - Register a USB Type-C Cable + * @port: The USB Type-C Port the cable is connected to + * @desc: Description of the cable + * + * Registers a device for USB Type-C Cable described in @desc. The cable will be + * parent for the optional cable plug devises. + * + * Returns handle to the cable on success or ERR_PTR on failure. + */ +struct typec_cable *typec_register_cable(struct typec_port *port, + struct typec_cable_desc *desc) +{ + struct typec_cable *cable; + int ret; + + cable = kzalloc(sizeof(*cable), GFP_KERNEL); + if (!cable) + return ERR_PTR(-ENOMEM); + + cable->type = desc->type; + cable->active = desc->active; + cable->pd_revision = desc->pd_revision; + + if (desc->identity) { + /* + * Creating directory for the identity only if the driver is + * able to provide data to it. + */ + cable->dev.groups = usb_pd_id_groups; + cable->identity = desc->identity; + } + + cable->dev.class = &typec_class; + cable->dev.parent = &port->dev; + cable->dev.type = &typec_cable_dev_type; + dev_set_name(&cable->dev, "%s-cable", dev_name(&port->dev)); + + ret = device_register(&cable->dev); + if (ret) { + dev_err(&port->dev, "failed to register cable (%d)\n", ret); + put_device(&cable->dev); + return ERR_PTR(ret); + } + + return cable; +} +EXPORT_SYMBOL_GPL(typec_register_cable); + +/** + * typec_unregister_cable - Unregister a USB Type-C Cable + * @cable: The cable to be unregistered + * + * Unregister device created with typec_register_cable(). + */ +void typec_unregister_cable(struct typec_cable *cable) +{ + if (!IS_ERR_OR_NULL(cable)) + device_unregister(&cable->dev); +} +EXPORT_SYMBOL_GPL(typec_unregister_cable); + +/* ------------------------------------------------------------------------- */ +/* USB Type-C ports */ + +/** + * typec_port_set_usb_power_delivery - Assign USB PD for port. + * @port: USB Type-C port. + * @pd: USB PD instance. + * + * This routine can be used to set the USB Power Delivery Capabilities for @port + * that it will advertise to the partner. + * + * If @pd is NULL, the assignment is removed. + */ +int typec_port_set_usb_power_delivery(struct typec_port *port, struct usb_power_delivery *pd) +{ + int ret; + + if (IS_ERR_OR_NULL(port) || port->pd == pd) + return 0; + + if (pd) { + ret = usb_power_delivery_link_device(pd, &port->dev); + if (ret) + return ret; + } else { + usb_power_delivery_unlink_device(port->pd, &port->dev); + } + + port->pd = pd; + + return 0; +} +EXPORT_SYMBOL_GPL(typec_port_set_usb_power_delivery); + +static ssize_t select_usb_power_delivery_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + struct usb_power_delivery *pd; + + if (!port->ops || !port->ops->pd_set) + return -EOPNOTSUPP; + + pd = usb_power_delivery_find(buf); + if (!pd) + return -EINVAL; + + return port->ops->pd_set(port, pd); +} + +static ssize_t select_usb_power_delivery_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct typec_port *port = to_typec_port(dev); + struct usb_power_delivery **pds; + int i, ret = 0; + + if (!port->ops || !port->ops->pd_get) + return -EOPNOTSUPP; + + pds = port->ops->pd_get(port); + if (!pds) + return 0; + + for (i = 0; pds[i]; i++) { + if (pds[i] == port->pd) + ret += sysfs_emit_at(buf, ret, "[%s] ", dev_name(&pds[i]->dev)); + else + ret += sysfs_emit_at(buf, ret, "%s ", dev_name(&pds[i]->dev)); + } + + buf[ret - 1] = '\n'; + + return ret; +} +static DEVICE_ATTR_RW(select_usb_power_delivery); + +static struct attribute *port_attrs[] = { + &dev_attr_select_usb_power_delivery.attr, + NULL +}; + +static umode_t port_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) +{ + struct typec_port *port = to_typec_port(kobj_to_dev(kobj)); + + if (!port->pd || !port->ops || !port->ops->pd_get) + return 0; + if (!port->ops->pd_set) + return 0444; + + return attr->mode; +} + +static const struct attribute_group pd_group = { + .is_visible = port_attr_is_visible, + .attrs = port_attrs, +}; + +static const char * const typec_orientations[] = { + [TYPEC_ORIENTATION_NONE] = "unknown", + [TYPEC_ORIENTATION_NORMAL] = "normal", + [TYPEC_ORIENTATION_REVERSE] = "reverse", +}; + +static const char * const typec_roles[] = { + [TYPEC_SINK] = "sink", + [TYPEC_SOURCE] = "source", +}; + +static const char * const typec_data_roles[] = { + [TYPEC_DEVICE] = "device", + [TYPEC_HOST] = "host", +}; + +static const char * const typec_port_power_roles[] = { + [TYPEC_PORT_SRC] = "source", + [TYPEC_PORT_SNK] = "sink", + [TYPEC_PORT_DRP] = "dual", +}; + +static const char * const typec_port_data_roles[] = { + [TYPEC_PORT_DFP] = "host", + [TYPEC_PORT_UFP] = "device", + [TYPEC_PORT_DRD] = "dual", +}; + +static const char * const typec_port_types_drp[] = { + [TYPEC_PORT_SRC] = "dual [source] sink", + [TYPEC_PORT_SNK] = "dual source [sink]", + [TYPEC_PORT_DRP] = "[dual] source sink", +}; + +static ssize_t +preferred_role_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + int role; + int ret; + + if (port->cap->type != TYPEC_PORT_DRP) { + dev_dbg(dev, "Preferred role only supported with DRP ports\n"); + return -EOPNOTSUPP; + } + + if (!port->ops || !port->ops->try_role) { + dev_dbg(dev, "Setting preferred role not supported\n"); + return -EOPNOTSUPP; + } + + role = sysfs_match_string(typec_roles, buf); + if (role < 0) { + if (sysfs_streq(buf, "none")) + role = TYPEC_NO_PREFERRED_ROLE; + else + return -EINVAL; + } + + ret = port->ops->try_role(port, role); + if (ret) + return ret; + + port->prefer_role = role; + return size; +} + +static ssize_t +preferred_role_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + if (port->cap->type != TYPEC_PORT_DRP) + return 0; + + if (port->prefer_role < 0) + return 0; + + return sprintf(buf, "%s\n", typec_roles[port->prefer_role]); +} +static DEVICE_ATTR_RW(preferred_role); + +static ssize_t data_role_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + int ret; + + if (!port->ops || !port->ops->dr_set) { + dev_dbg(dev, "data role swapping not supported\n"); + return -EOPNOTSUPP; + } + + ret = sysfs_match_string(typec_data_roles, buf); + if (ret < 0) + return ret; + + mutex_lock(&port->port_type_lock); + if (port->cap->data != TYPEC_PORT_DRD) { + ret = -EOPNOTSUPP; + goto unlock_and_ret; + } + + ret = port->ops->dr_set(port, ret); + if (ret) + goto unlock_and_ret; + + ret = size; +unlock_and_ret: + mutex_unlock(&port->port_type_lock); + return ret; +} + +static ssize_t data_role_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + if (port->cap->data == TYPEC_PORT_DRD) + return sprintf(buf, "%s\n", port->data_role == TYPEC_HOST ? + "[host] device" : "host [device]"); + + return sprintf(buf, "[%s]\n", typec_data_roles[port->data_role]); +} +static DEVICE_ATTR_RW(data_role); + +static ssize_t power_role_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + int ret; + + if (!port->ops || !port->ops->pr_set) { + dev_dbg(dev, "power role swapping not supported\n"); + return -EOPNOTSUPP; + } + + if (port->pwr_opmode != TYPEC_PWR_MODE_PD) { + dev_dbg(dev, "partner unable to swap power role\n"); + return -EIO; + } + + ret = sysfs_match_string(typec_roles, buf); + if (ret < 0) + return ret; + + mutex_lock(&port->port_type_lock); + if (port->port_type != TYPEC_PORT_DRP) { + dev_dbg(dev, "port type fixed at \"%s\"", + typec_port_power_roles[port->port_type]); + ret = -EOPNOTSUPP; + goto unlock_and_ret; + } + + ret = port->ops->pr_set(port, ret); + if (ret) + goto unlock_and_ret; + + ret = size; +unlock_and_ret: + mutex_unlock(&port->port_type_lock); + return ret; +} + +static ssize_t power_role_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + if (port->cap->type == TYPEC_PORT_DRP) + return sprintf(buf, "%s\n", port->pwr_role == TYPEC_SOURCE ? + "[source] sink" : "source [sink]"); + + return sprintf(buf, "[%s]\n", typec_roles[port->pwr_role]); +} +static DEVICE_ATTR_RW(power_role); + +static ssize_t +port_type_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + int ret; + enum typec_port_type type; + + if (port->cap->type != TYPEC_PORT_DRP || + !port->ops || !port->ops->port_type_set) { + dev_dbg(dev, "changing port type not supported\n"); + return -EOPNOTSUPP; + } + + ret = sysfs_match_string(typec_port_power_roles, buf); + if (ret < 0) + return ret; + + type = ret; + mutex_lock(&port->port_type_lock); + + if (port->port_type == type) { + ret = size; + goto unlock_and_ret; + } + + ret = port->ops->port_type_set(port, type); + if (ret) + goto unlock_and_ret; + + port->port_type = type; + ret = size; + +unlock_and_ret: + mutex_unlock(&port->port_type_lock); + return ret; +} + +static ssize_t +port_type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + if (port->cap->type == TYPEC_PORT_DRP) + return sprintf(buf, "%s\n", + typec_port_types_drp[port->port_type]); + + return sprintf(buf, "[%s]\n", typec_port_power_roles[port->cap->type]); +} +static DEVICE_ATTR_RW(port_type); + +static const char * const typec_pwr_opmodes[] = { + [TYPEC_PWR_MODE_USB] = "default", + [TYPEC_PWR_MODE_1_5A] = "1.5A", + [TYPEC_PWR_MODE_3_0A] = "3.0A", + [TYPEC_PWR_MODE_PD] = "usb_power_delivery", +}; + +static ssize_t power_operation_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + return sprintf(buf, "%s\n", typec_pwr_opmodes[port->pwr_opmode]); +} +static DEVICE_ATTR_RO(power_operation_mode); + +static ssize_t vconn_source_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + bool source; + int ret; + + if (!port->cap->pd_revision) { + dev_dbg(dev, "VCONN swap depends on USB Power Delivery\n"); + return -EOPNOTSUPP; + } + + if (!port->ops || !port->ops->vconn_set) { + dev_dbg(dev, "VCONN swapping not supported\n"); + return -EOPNOTSUPP; + } + + ret = kstrtobool(buf, &source); + if (ret) + return ret; + + ret = port->ops->vconn_set(port, (enum typec_role)source); + if (ret) + return ret; + + return size; +} + +static ssize_t vconn_source_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + return sprintf(buf, "%s\n", + port->vconn_role == TYPEC_SOURCE ? "yes" : "no"); +} +static DEVICE_ATTR_RW(vconn_source); + +static ssize_t supported_accessory_modes_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + ssize_t ret = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(port->cap->accessory); i++) { + if (port->cap->accessory[i]) + ret += sprintf(buf + ret, "%s ", + typec_accessory_modes[port->cap->accessory[i]]); + } + + if (!ret) + return sprintf(buf, "none\n"); + + buf[ret - 1] = '\n'; + + return ret; +} +static DEVICE_ATTR_RO(supported_accessory_modes); + +static ssize_t usb_typec_revision_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + u16 rev = port->cap->revision; + + return sprintf(buf, "%d.%d\n", (rev >> 8) & 0xff, (rev >> 4) & 0xf); +} +static DEVICE_ATTR_RO(usb_typec_revision); + +static ssize_t usb_power_delivery_revision_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + u16 rev = 0; + + if (is_typec_partner(dev)) { + struct typec_partner *partner = to_typec_partner(dev); + + rev = partner->pd_revision; + } else if (is_typec_cable(dev)) { + struct typec_cable *cable = to_typec_cable(dev); + + rev = cable->pd_revision; + } else if (is_typec_port(dev)) { + struct typec_port *p = to_typec_port(dev); + + rev = p->cap->pd_revision; + } + return sysfs_emit(buf, "%d.%d\n", (rev >> 8) & 0xff, (rev >> 4) & 0xf); +} + +static ssize_t orientation_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + return sprintf(buf, "%s\n", typec_orientations[port->orientation]); +} +static DEVICE_ATTR_RO(orientation); + +static struct attribute *typec_attrs[] = { + &dev_attr_data_role.attr, + &dev_attr_power_operation_mode.attr, + &dev_attr_power_role.attr, + &dev_attr_preferred_role.attr, + &dev_attr_supported_accessory_modes.attr, + &dev_attr_usb_power_delivery_revision.attr, + &dev_attr_usb_typec_revision.attr, + &dev_attr_vconn_source.attr, + &dev_attr_port_type.attr, + &dev_attr_orientation.attr, + NULL, +}; + +static umode_t typec_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct typec_port *port = to_typec_port(kobj_to_dev(kobj)); + + if (attr == &dev_attr_data_role.attr) { + if (port->cap->data != TYPEC_PORT_DRD || + !port->ops || !port->ops->dr_set) + return 0444; + } else if (attr == &dev_attr_power_role.attr) { + if (port->cap->type != TYPEC_PORT_DRP || + !port->ops || !port->ops->pr_set) + return 0444; + } else if (attr == &dev_attr_vconn_source.attr) { + if (!port->cap->pd_revision || + !port->ops || !port->ops->vconn_set) + return 0444; + } else if (attr == &dev_attr_preferred_role.attr) { + if (port->cap->type != TYPEC_PORT_DRP || + !port->ops || !port->ops->try_role) + return 0444; + } else if (attr == &dev_attr_port_type.attr) { + if (!port->ops || !port->ops->port_type_set) + return 0; + if (port->cap->type != TYPEC_PORT_DRP) + return 0444; + } else if (attr == &dev_attr_orientation.attr) { + if (port->cap->orientation_aware) + return 0444; + return 0; + } + + return attr->mode; +} + +static const struct attribute_group typec_group = { + .is_visible = typec_attr_is_visible, + .attrs = typec_attrs, +}; + +static const struct attribute_group *typec_groups[] = { + &typec_group, + &pd_group, + NULL +}; + +static int typec_uevent(const struct device *dev, struct kobj_uevent_env *env) +{ + int ret; + + ret = add_uevent_var(env, "TYPEC_PORT=%s", dev_name(dev)); + if (ret) + dev_err(dev, "failed to add uevent TYPEC_PORT\n"); + + return ret; +} + +static void typec_release(struct device *dev) +{ + struct typec_port *port = to_typec_port(dev); + + ida_simple_remove(&typec_index_ida, port->id); + ida_destroy(&port->mode_ids); + typec_switch_put(port->sw); + typec_mux_put(port->mux); + typec_retimer_put(port->retimer); + kfree(port->cap); + kfree(port); +} + +const struct device_type typec_port_dev_type = { + .name = "typec_port", + .groups = typec_groups, + .uevent = typec_uevent, + .release = typec_release, +}; + +/* --------------------------------------- */ +/* Driver callbacks to report role updates */ + +static int partner_match(struct device *dev, void *data) +{ + return is_typec_partner(dev); +} + +/** + * typec_set_data_role - Report data role change + * @port: The USB Type-C Port where the role was changed + * @role: The new data role + * + * This routine is used by the port drivers to report data role changes. + */ +void typec_set_data_role(struct typec_port *port, enum typec_data_role role) +{ + struct device *partner_dev; + + if (port->data_role == role) + return; + + port->data_role = role; + sysfs_notify(&port->dev.kobj, NULL, "data_role"); + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); + + partner_dev = device_find_child(&port->dev, NULL, partner_match); + if (!partner_dev) + return; + + if (to_typec_partner(partner_dev)->identity) + typec_product_type_notify(partner_dev); + + put_device(partner_dev); +} +EXPORT_SYMBOL_GPL(typec_set_data_role); + +/** + * typec_set_pwr_role - Report power role change + * @port: The USB Type-C Port where the role was changed + * @role: The new data role + * + * This routine is used by the port drivers to report power role changes. + */ +void typec_set_pwr_role(struct typec_port *port, enum typec_role role) +{ + if (port->pwr_role == role) + return; + + port->pwr_role = role; + sysfs_notify(&port->dev.kobj, NULL, "power_role"); + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); +} +EXPORT_SYMBOL_GPL(typec_set_pwr_role); + +/** + * typec_set_vconn_role - Report VCONN source change + * @port: The USB Type-C Port which VCONN role changed + * @role: Source when @port is sourcing VCONN, or Sink when it's not + * + * This routine is used by the port drivers to report if the VCONN source is + * changes. + */ +void typec_set_vconn_role(struct typec_port *port, enum typec_role role) +{ + if (port->vconn_role == role) + return; + + port->vconn_role = role; + sysfs_notify(&port->dev.kobj, NULL, "vconn_source"); + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); +} +EXPORT_SYMBOL_GPL(typec_set_vconn_role); + +/** + * typec_set_pwr_opmode - Report changed power operation mode + * @port: The USB Type-C Port where the mode was changed + * @opmode: New power operation mode + * + * This routine is used by the port drivers to report changed power operation + * mode in @port. The modes are USB (default), 1.5A, 3.0A as defined in USB + * Type-C specification, and "USB Power Delivery" when the power levels are + * negotiated with methods defined in USB Power Delivery specification. + */ +void typec_set_pwr_opmode(struct typec_port *port, + enum typec_pwr_opmode opmode) +{ + struct device *partner_dev; + + if (port->pwr_opmode == opmode) + return; + + port->pwr_opmode = opmode; + sysfs_notify(&port->dev.kobj, NULL, "power_operation_mode"); + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); + + partner_dev = device_find_child(&port->dev, NULL, partner_match); + if (partner_dev) { + struct typec_partner *partner = to_typec_partner(partner_dev); + + if (opmode == TYPEC_PWR_MODE_PD && !partner->usb_pd) { + partner->usb_pd = 1; + sysfs_notify(&partner_dev->kobj, NULL, + "supports_usb_power_delivery"); + kobject_uevent(&partner_dev->kobj, KOBJ_CHANGE); + } + put_device(partner_dev); + } +} +EXPORT_SYMBOL_GPL(typec_set_pwr_opmode); + +/** + * typec_find_pwr_opmode - Get the typec power operation mode capability + * @name: power operation mode string + * + * This routine is used to find the typec_pwr_opmode by its string @name. + * + * Returns typec_pwr_opmode if success, otherwise negative error code. + */ +int typec_find_pwr_opmode(const char *name) +{ + return match_string(typec_pwr_opmodes, + ARRAY_SIZE(typec_pwr_opmodes), name); +} +EXPORT_SYMBOL_GPL(typec_find_pwr_opmode); + +/** + * typec_find_orientation - Convert orientation string to enum typec_orientation + * @name: Orientation string + * + * This routine is used to find the typec_orientation by its string name @name. + * + * Returns the orientation value on success, otherwise negative error code. + */ +int typec_find_orientation(const char *name) +{ + return match_string(typec_orientations, ARRAY_SIZE(typec_orientations), + name); +} +EXPORT_SYMBOL_GPL(typec_find_orientation); + +/** + * typec_find_port_power_role - Get the typec port power capability + * @name: port power capability string + * + * This routine is used to find the typec_port_type by its string name. + * + * Returns typec_port_type if success, otherwise negative error code. + */ +int typec_find_port_power_role(const char *name) +{ + return match_string(typec_port_power_roles, + ARRAY_SIZE(typec_port_power_roles), name); +} +EXPORT_SYMBOL_GPL(typec_find_port_power_role); + +/** + * typec_find_power_role - Find the typec one specific power role + * @name: power role string + * + * This routine is used to find the typec_role by its string name. + * + * Returns typec_role if success, otherwise negative error code. + */ +int typec_find_power_role(const char *name) +{ + return match_string(typec_roles, ARRAY_SIZE(typec_roles), name); +} +EXPORT_SYMBOL_GPL(typec_find_power_role); + +/** + * typec_find_port_data_role - Get the typec port data capability + * @name: port data capability string + * + * This routine is used to find the typec_port_data by its string name. + * + * Returns typec_port_data if success, otherwise negative error code. + */ +int typec_find_port_data_role(const char *name) +{ + return match_string(typec_port_data_roles, + ARRAY_SIZE(typec_port_data_roles), name); +} +EXPORT_SYMBOL_GPL(typec_find_port_data_role); + +/* ------------------------------------------ */ +/* API for Multiplexer/DeMultiplexer Switches */ + +/** + * typec_set_orientation - Set USB Type-C cable plug orientation + * @port: USB Type-C Port + * @orientation: USB Type-C cable plug orientation + * + * Set cable plug orientation for @port. + */ +int typec_set_orientation(struct typec_port *port, + enum typec_orientation orientation) +{ + int ret; + + ret = typec_switch_set(port->sw, orientation); + if (ret) + return ret; + + port->orientation = orientation; + sysfs_notify(&port->dev.kobj, NULL, "orientation"); + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); + + return 0; +} +EXPORT_SYMBOL_GPL(typec_set_orientation); + +/** + * typec_get_orientation - Get USB Type-C cable plug orientation + * @port: USB Type-C Port + * + * Get current cable plug orientation for @port. + */ +enum typec_orientation typec_get_orientation(struct typec_port *port) +{ + return port->orientation; +} +EXPORT_SYMBOL_GPL(typec_get_orientation); + +/** + * typec_set_mode - Set mode of operation for USB Type-C connector + * @port: USB Type-C connector + * @mode: Accessory Mode, USB Operation or Safe State + * + * Configure @port for Accessory Mode @mode. This function will configure the + * muxes needed for @mode. + */ +int typec_set_mode(struct typec_port *port, int mode) +{ + struct typec_mux_state state = { }; + + state.mode = mode; + + return typec_mux_set(port->mux, &state); +} +EXPORT_SYMBOL_GPL(typec_set_mode); + +/* --------------------------------------- */ + +/** + * typec_get_negotiated_svdm_version - Get negotiated SVDM Version + * @port: USB Type-C Port. + * + * Get the negotiated SVDM Version. The Version is set to the port default + * value stored in typec_capability on partner registration, and updated after + * a successful Discover Identity if the negotiated value is less than the + * default value. + * + * Returns usb_pd_svdm_ver if the partner has been registered otherwise -ENODEV. + */ +int typec_get_negotiated_svdm_version(struct typec_port *port) +{ + enum usb_pd_svdm_ver svdm_version; + struct device *partner_dev; + + partner_dev = device_find_child(&port->dev, NULL, partner_match); + if (!partner_dev) + return -ENODEV; + + svdm_version = to_typec_partner(partner_dev)->svdm_version; + put_device(partner_dev); + + return svdm_version; +} +EXPORT_SYMBOL_GPL(typec_get_negotiated_svdm_version); + +/** + * typec_get_drvdata - Return private driver data pointer + * @port: USB Type-C port + */ +void *typec_get_drvdata(struct typec_port *port) +{ + return dev_get_drvdata(&port->dev); +} +EXPORT_SYMBOL_GPL(typec_get_drvdata); + +int typec_get_fw_cap(struct typec_capability *cap, + struct fwnode_handle *fwnode) +{ + const char *cap_str; + int ret; + + cap->fwnode = fwnode; + + ret = fwnode_property_read_string(fwnode, "power-role", &cap_str); + if (ret < 0) + return ret; + + ret = typec_find_port_power_role(cap_str); + if (ret < 0) + return ret; + cap->type = ret; + + /* USB data support is optional */ + ret = fwnode_property_read_string(fwnode, "data-role", &cap_str); + if (ret == 0) { + ret = typec_find_port_data_role(cap_str); + if (ret < 0) + return ret; + cap->data = ret; + } + + /* Get the preferred power role for a DRP */ + if (cap->type == TYPEC_PORT_DRP) { + cap->prefer_role = TYPEC_NO_PREFERRED_ROLE; + + ret = fwnode_property_read_string(fwnode, "try-power-role", &cap_str); + if (ret == 0) { + ret = typec_find_power_role(cap_str); + if (ret < 0) + return ret; + cap->prefer_role = ret; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(typec_get_fw_cap); + +/** + * typec_port_register_altmode - Register USB Type-C Port Alternate Mode + * @port: USB Type-C Port that supports the alternate mode + * @desc: Description of the alternate mode + * + * This routine is used to register an alternate mode that @port is capable of + * supporting. + * + * Returns handle to the alternate mode on success or ERR_PTR on failure. + */ +struct typec_altmode * +typec_port_register_altmode(struct typec_port *port, + const struct typec_altmode_desc *desc) +{ + struct typec_altmode *adev; + struct typec_mux *mux; + struct typec_retimer *retimer; + + mux = typec_mux_get(&port->dev); + if (IS_ERR(mux)) + return ERR_CAST(mux); + + retimer = typec_retimer_get(&port->dev); + if (IS_ERR(retimer)) { + typec_mux_put(mux); + return ERR_CAST(retimer); + } + + adev = typec_register_altmode(&port->dev, desc); + if (IS_ERR(adev)) { + typec_retimer_put(retimer); + typec_mux_put(mux); + } else { + to_altmode(adev)->mux = mux; + to_altmode(adev)->retimer = retimer; + } + + return adev; +} +EXPORT_SYMBOL_GPL(typec_port_register_altmode); + +void typec_port_register_altmodes(struct typec_port *port, + const struct typec_altmode_ops *ops, void *drvdata, + struct typec_altmode **altmodes, size_t n) +{ + struct fwnode_handle *altmodes_node, *child; + struct typec_altmode_desc desc; + struct typec_altmode *alt; + size_t index = 0; + u32 svid, vdo; + int ret; + + altmodes_node = device_get_named_child_node(&port->dev, "altmodes"); + if (!altmodes_node) + return; /* No altmodes specified */ + + fwnode_for_each_child_node(altmodes_node, child) { + ret = fwnode_property_read_u32(child, "svid", &svid); + if (ret) { + dev_err(&port->dev, "Error reading svid for altmode %s\n", + fwnode_get_name(child)); + continue; + } + + ret = fwnode_property_read_u32(child, "vdo", &vdo); + if (ret) { + dev_err(&port->dev, "Error reading vdo for altmode %s\n", + fwnode_get_name(child)); + continue; + } + + if (index >= n) { + dev_err(&port->dev, "Error not enough space for altmode %s\n", + fwnode_get_name(child)); + continue; + } + + desc.svid = svid; + desc.vdo = vdo; + desc.mode = index + 1; + alt = typec_port_register_altmode(port, &desc); + if (IS_ERR(alt)) { + dev_err(&port->dev, "Error registering altmode %s\n", + fwnode_get_name(child)); + continue; + } + + alt->ops = ops; + typec_altmode_set_drvdata(alt, drvdata); + altmodes[index] = alt; + index++; + } +} +EXPORT_SYMBOL_GPL(typec_port_register_altmodes); + +/** + * typec_register_port - Register a USB Type-C Port + * @parent: Parent device + * @cap: Description of the port + * + * Registers a device for USB Type-C Port described in @cap. + * + * Returns handle to the port on success or ERR_PTR on failure. + */ +struct typec_port *typec_register_port(struct device *parent, + const struct typec_capability *cap) +{ + struct typec_port *port; + int ret; + int id; + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return ERR_PTR(-ENOMEM); + + id = ida_simple_get(&typec_index_ida, 0, 0, GFP_KERNEL); + if (id < 0) { + kfree(port); + return ERR_PTR(id); + } + + switch (cap->type) { + case TYPEC_PORT_SRC: + port->pwr_role = TYPEC_SOURCE; + port->vconn_role = TYPEC_SOURCE; + break; + case TYPEC_PORT_SNK: + port->pwr_role = TYPEC_SINK; + port->vconn_role = TYPEC_SINK; + break; + case TYPEC_PORT_DRP: + if (cap->prefer_role != TYPEC_NO_PREFERRED_ROLE) + port->pwr_role = cap->prefer_role; + else + port->pwr_role = TYPEC_SINK; + break; + } + + switch (cap->data) { + case TYPEC_PORT_DFP: + port->data_role = TYPEC_HOST; + break; + case TYPEC_PORT_UFP: + port->data_role = TYPEC_DEVICE; + break; + case TYPEC_PORT_DRD: + if (cap->prefer_role == TYPEC_SOURCE) + port->data_role = TYPEC_HOST; + else + port->data_role = TYPEC_DEVICE; + break; + } + + ida_init(&port->mode_ids); + mutex_init(&port->port_type_lock); + + port->id = id; + port->ops = cap->ops; + port->port_type = cap->type; + port->prefer_role = cap->prefer_role; + + device_initialize(&port->dev); + port->dev.class = &typec_class; + port->dev.parent = parent; + port->dev.fwnode = cap->fwnode; + port->dev.type = &typec_port_dev_type; + dev_set_name(&port->dev, "port%d", id); + dev_set_drvdata(&port->dev, cap->driver_data); + + port->cap = kmemdup(cap, sizeof(*cap), GFP_KERNEL); + if (!port->cap) { + put_device(&port->dev); + return ERR_PTR(-ENOMEM); + } + + port->sw = typec_switch_get(&port->dev); + if (IS_ERR(port->sw)) { + ret = PTR_ERR(port->sw); + put_device(&port->dev); + return ERR_PTR(ret); + } + + port->mux = typec_mux_get(&port->dev); + if (IS_ERR(port->mux)) { + ret = PTR_ERR(port->mux); + put_device(&port->dev); + return ERR_PTR(ret); + } + + port->retimer = typec_retimer_get(&port->dev); + if (IS_ERR(port->retimer)) { + ret = PTR_ERR(port->retimer); + put_device(&port->dev); + return ERR_PTR(ret); + } + + port->pd = cap->pd; + + ret = device_add(&port->dev); + if (ret) { + dev_err(parent, "failed to register port (%d)\n", ret); + put_device(&port->dev); + return ERR_PTR(ret); + } + + ret = usb_power_delivery_link_device(port->pd, &port->dev); + if (ret) { + dev_err(&port->dev, "failed to link pd\n"); + device_unregister(&port->dev); + return ERR_PTR(ret); + } + + ret = typec_link_ports(port); + if (ret) + dev_warn(&port->dev, "failed to create symlinks (%d)\n", ret); + + return port; +} +EXPORT_SYMBOL_GPL(typec_register_port); + +/** + * typec_unregister_port - Unregister a USB Type-C Port + * @port: The port to be unregistered + * + * Unregister device created with typec_register_port(). + */ +void typec_unregister_port(struct typec_port *port) +{ + if (!IS_ERR_OR_NULL(port)) { + typec_unlink_ports(port); + typec_port_set_usb_power_delivery(port, NULL); + device_unregister(&port->dev); + } +} +EXPORT_SYMBOL_GPL(typec_unregister_port); + +static int __init typec_init(void) +{ + int ret; + + ret = bus_register(&typec_bus); + if (ret) + return ret; + + ret = class_register(&typec_mux_class); + if (ret) + goto err_unregister_bus; + + ret = class_register(&retimer_class); + if (ret) + goto err_unregister_mux_class; + + ret = class_register(&typec_class); + if (ret) + goto err_unregister_retimer_class; + + ret = usb_power_delivery_init(); + if (ret) + goto err_unregister_class; + + return 0; + +err_unregister_class: + class_unregister(&typec_class); + +err_unregister_retimer_class: + class_unregister(&retimer_class); + +err_unregister_mux_class: + class_unregister(&typec_mux_class); + +err_unregister_bus: + bus_unregister(&typec_bus); + + return ret; +} +subsys_initcall(typec_init); + +static void __exit typec_exit(void) +{ + usb_power_delivery_exit(); + class_unregister(&typec_class); + ida_destroy(&typec_index_ida); + bus_unregister(&typec_bus); + class_unregister(&typec_mux_class); + class_unregister(&retimer_class); +} +module_exit(typec_exit); + +MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("USB Type-C Connector Class"); diff --git a/drivers/usb/typec/class.h b/drivers/usb/typec/class.h new file mode 100644 index 0000000000..673b2952b0 --- /dev/null +++ b/drivers/usb/typec/class.h @@ -0,0 +1,91 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __USB_TYPEC_CLASS__ +#define __USB_TYPEC_CLASS__ + +#include <linux/device.h> +#include <linux/usb/typec.h> + +struct typec_mux; +struct typec_switch; + +struct typec_plug { + struct device dev; + enum typec_plug_index index; + struct ida mode_ids; + int num_altmodes; +}; + +struct typec_cable { + struct device dev; + enum typec_plug_type type; + struct usb_pd_identity *identity; + unsigned int active:1; + u16 pd_revision; /* 0300H = "3.0" */ +}; + +struct typec_partner { + struct device dev; + unsigned int usb_pd:1; + struct usb_pd_identity *identity; + enum typec_accessory accessory; + struct ida mode_ids; + int num_altmodes; + u16 pd_revision; /* 0300H = "3.0" */ + enum usb_pd_svdm_ver svdm_version; + + struct usb_power_delivery *pd; +}; + +struct typec_port { + unsigned int id; + struct device dev; + struct ida mode_ids; + + struct usb_power_delivery *pd; + + int prefer_role; + enum typec_data_role data_role; + enum typec_role pwr_role; + enum typec_role vconn_role; + enum typec_pwr_opmode pwr_opmode; + enum typec_port_type port_type; + struct mutex port_type_lock; + + enum typec_orientation orientation; + struct typec_switch *sw; + struct typec_mux *mux; + struct typec_retimer *retimer; + + const struct typec_capability *cap; + const struct typec_operations *ops; +}; + +#define to_typec_port(_dev_) container_of(_dev_, struct typec_port, dev) +#define to_typec_plug(_dev_) container_of(_dev_, struct typec_plug, dev) +#define to_typec_cable(_dev_) container_of(_dev_, struct typec_cable, dev) +#define to_typec_partner(_dev_) container_of(_dev_, struct typec_partner, dev) + +extern const struct device_type typec_partner_dev_type; +extern const struct device_type typec_cable_dev_type; +extern const struct device_type typec_plug_dev_type; +extern const struct device_type typec_port_dev_type; + +#define is_typec_partner(dev) ((dev)->type == &typec_partner_dev_type) +#define is_typec_cable(dev) ((dev)->type == &typec_cable_dev_type) +#define is_typec_plug(dev) ((dev)->type == &typec_plug_dev_type) +#define is_typec_port(dev) ((dev)->type == &typec_port_dev_type) + +extern struct class typec_mux_class; +extern struct class retimer_class; +extern struct class typec_class; + +#if defined(CONFIG_ACPI) +int typec_link_ports(struct typec_port *connector); +void typec_unlink_ports(struct typec_port *connector); +#else +static inline int typec_link_ports(struct typec_port *connector) { return 0; } +static inline void typec_unlink_ports(struct typec_port *connector) { } +#endif + +#endif /* __USB_TYPEC_CLASS__ */ diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c new file mode 100644 index 0000000000..fb1242e82f --- /dev/null +++ b/drivers/usb/typec/hd3ss3220.c @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * TI HD3SS3220 Type-C DRP Port Controller Driver + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/usb/role.h> +#include <linux/irqreturn.h> +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/usb/typec.h> +#include <linux/delay.h> +#include <linux/workqueue.h> + +#define HD3SS3220_REG_CN_STAT_CTRL 0x09 +#define HD3SS3220_REG_GEN_CTRL 0x0A +#define HD3SS3220_REG_DEV_REV 0xA0 + +/* Register HD3SS3220_REG_CN_STAT_CTRL*/ +#define HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK (BIT(7) | BIT(6)) +#define HD3SS3220_REG_CN_STAT_CTRL_AS_DFP BIT(6) +#define HD3SS3220_REG_CN_STAT_CTRL_AS_UFP BIT(7) +#define HD3SS3220_REG_CN_STAT_CTRL_TO_ACCESSORY (BIT(7) | BIT(6)) +#define HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS BIT(4) + +/* Register HD3SS3220_REG_GEN_CTRL*/ +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK (BIT(2) | BIT(1)) +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT 0x00 +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK BIT(1) +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC (BIT(2) | BIT(1)) + +struct hd3ss3220 { + struct device *dev; + struct regmap *regmap; + struct usb_role_switch *role_sw; + struct typec_port *port; + struct delayed_work output_poll_work; + enum usb_role role_state; + bool poll; +}; + +static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int src_pref) +{ + return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL, + HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK, + src_pref); +} + +static enum usb_role hd3ss3220_get_attached_state(struct hd3ss3220 *hd3ss3220) +{ + unsigned int reg_val; + enum usb_role attached_state; + int ret; + + ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, + ®_val); + if (ret < 0) + return ret; + + switch (reg_val & HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK) { + case HD3SS3220_REG_CN_STAT_CTRL_AS_DFP: + attached_state = USB_ROLE_HOST; + break; + case HD3SS3220_REG_CN_STAT_CTRL_AS_UFP: + attached_state = USB_ROLE_DEVICE; + break; + default: + attached_state = USB_ROLE_NONE; + break; + } + + return attached_state; +} + +static int hd3ss3220_dr_set(struct typec_port *port, enum typec_data_role role) +{ + struct hd3ss3220 *hd3ss3220 = typec_get_drvdata(port); + enum usb_role role_val; + int pref, ret = 0; + + if (role == TYPEC_HOST) { + role_val = USB_ROLE_HOST; + pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC; + } else { + role_val = USB_ROLE_DEVICE; + pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK; + } + + ret = hd3ss3220_set_source_pref(hd3ss3220, pref); + usleep_range(10, 100); + + usb_role_switch_set_role(hd3ss3220->role_sw, role_val); + typec_set_data_role(hd3ss3220->port, role); + + return ret; +} + +static const struct typec_operations hd3ss3220_ops = { + .dr_set = hd3ss3220_dr_set +}; + +static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220) +{ + enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220); + + usb_role_switch_set_role(hd3ss3220->role_sw, role_state); + if (role_state == USB_ROLE_NONE) + hd3ss3220_set_source_pref(hd3ss3220, + HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); + + switch (role_state) { + case USB_ROLE_HOST: + typec_set_data_role(hd3ss3220->port, TYPEC_HOST); + break; + case USB_ROLE_DEVICE: + typec_set_data_role(hd3ss3220->port, TYPEC_DEVICE); + break; + default: + break; + } + + hd3ss3220->role_state = role_state; +} + +static void output_poll_execute(struct work_struct *work) +{ + struct delayed_work *delayed_work = to_delayed_work(work); + struct hd3ss3220 *hd3ss3220 = container_of(delayed_work, + struct hd3ss3220, + output_poll_work); + enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220); + + if (hd3ss3220->role_state != role_state) + hd3ss3220_set_role(hd3ss3220); + + schedule_delayed_work(&hd3ss3220->output_poll_work, HZ); +} + +static irqreturn_t hd3ss3220_irq(struct hd3ss3220 *hd3ss3220) +{ + int err; + + hd3ss3220_set_role(hd3ss3220); + err = regmap_write_bits(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, + HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS, + HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS); + if (err < 0) + return IRQ_NONE; + + return IRQ_HANDLED; +} + +static irqreturn_t hd3ss3220_irq_handler(int irq, void *data) +{ + struct i2c_client *client = to_i2c_client(data); + struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client); + + return hd3ss3220_irq(hd3ss3220); +} + +static const struct regmap_config config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x0A, +}; + +static int hd3ss3220_probe(struct i2c_client *client) +{ + struct typec_capability typec_cap = { }; + struct hd3ss3220 *hd3ss3220; + struct fwnode_handle *connector, *ep; + int ret; + unsigned int data; + + hd3ss3220 = devm_kzalloc(&client->dev, sizeof(struct hd3ss3220), + GFP_KERNEL); + if (!hd3ss3220) + return -ENOMEM; + + i2c_set_clientdata(client, hd3ss3220); + + hd3ss3220->dev = &client->dev; + hd3ss3220->regmap = devm_regmap_init_i2c(client, &config); + if (IS_ERR(hd3ss3220->regmap)) + return PTR_ERR(hd3ss3220->regmap); + + hd3ss3220_set_source_pref(hd3ss3220, + HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); + /* For backward compatibility check the connector child node first */ + connector = device_get_named_child_node(hd3ss3220->dev, "connector"); + if (connector) { + hd3ss3220->role_sw = fwnode_usb_role_switch_get(connector); + } else { + ep = fwnode_graph_get_next_endpoint(dev_fwnode(hd3ss3220->dev), NULL); + if (!ep) + return -ENODEV; + connector = fwnode_graph_get_remote_port_parent(ep); + fwnode_handle_put(ep); + if (!connector) + return -ENODEV; + hd3ss3220->role_sw = usb_role_switch_get(hd3ss3220->dev); + } + + if (IS_ERR(hd3ss3220->role_sw)) { + ret = PTR_ERR(hd3ss3220->role_sw); + goto err_put_fwnode; + } + + typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + typec_cap.driver_data = hd3ss3220; + typec_cap.type = TYPEC_PORT_DRP; + typec_cap.data = TYPEC_PORT_DRD; + typec_cap.ops = &hd3ss3220_ops; + typec_cap.fwnode = connector; + + hd3ss3220->port = typec_register_port(&client->dev, &typec_cap); + if (IS_ERR(hd3ss3220->port)) { + ret = PTR_ERR(hd3ss3220->port); + goto err_put_role; + } + + hd3ss3220_set_role(hd3ss3220); + ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, &data); + if (ret < 0) + goto err_unreg_port; + + if (data & HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS) { + ret = regmap_write(hd3ss3220->regmap, + HD3SS3220_REG_CN_STAT_CTRL, + data | HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS); + if (ret < 0) + goto err_unreg_port; + } + + if (client->irq > 0) { + ret = devm_request_threaded_irq(&client->dev, client->irq, NULL, + hd3ss3220_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "hd3ss3220", &client->dev); + if (ret) + goto err_unreg_port; + } else { + INIT_DELAYED_WORK(&hd3ss3220->output_poll_work, output_poll_execute); + hd3ss3220->poll = true; + } + + ret = i2c_smbus_read_byte_data(client, HD3SS3220_REG_DEV_REV); + if (ret < 0) + goto err_unreg_port; + + fwnode_handle_put(connector); + + if (hd3ss3220->poll) + schedule_delayed_work(&hd3ss3220->output_poll_work, HZ); + + dev_info(&client->dev, "probed revision=0x%x\n", ret); + + return 0; +err_unreg_port: + typec_unregister_port(hd3ss3220->port); +err_put_role: + usb_role_switch_put(hd3ss3220->role_sw); +err_put_fwnode: + fwnode_handle_put(connector); + + return ret; +} + +static void hd3ss3220_remove(struct i2c_client *client) +{ + struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client); + + if (hd3ss3220->poll) + cancel_delayed_work_sync(&hd3ss3220->output_poll_work); + + typec_unregister_port(hd3ss3220->port); + usb_role_switch_put(hd3ss3220->role_sw); +} + +static const struct of_device_id dev_ids[] = { + { .compatible = "ti,hd3ss3220"}, + {} +}; +MODULE_DEVICE_TABLE(of, dev_ids); + +static struct i2c_driver hd3ss3220_driver = { + .driver = { + .name = "hd3ss3220", + .of_match_table = dev_ids, + }, + .probe = hd3ss3220_probe, + .remove = hd3ss3220_remove, +}; + +module_i2c_driver(hd3ss3220_driver); + +MODULE_AUTHOR("Biju Das <biju.das@bp.renesas.com>"); +MODULE_DESCRIPTION("TI HD3SS3220 DRP Port Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c new file mode 100644 index 0000000000..80dd91938d --- /dev/null +++ b/drivers/usb/typec/mux.c @@ -0,0 +1,474 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB Type-C Multiplexer/DeMultiplexer Switch support + * + * Copyright (C) 2018 Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/device.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/property.h> +#include <linux/slab.h> + +#include "class.h" +#include "mux.h" + +#define TYPEC_MUX_MAX_DEVS 3 + +struct typec_switch { + struct typec_switch_dev *sw_devs[TYPEC_MUX_MAX_DEVS]; + unsigned int num_sw_devs; +}; + +static int switch_fwnode_match(struct device *dev, const void *fwnode) +{ + if (!is_typec_switch_dev(dev)) + return 0; + + return device_match_fwnode(dev, fwnode); +} + +static void *typec_switch_match(const struct fwnode_handle *fwnode, + const char *id, void *data) +{ + struct device *dev; + + /* + * Device graph (OF graph) does not give any means to identify the + * device type or the device class of the remote port parent that @fwnode + * represents, so in order to identify the type or the class of @fwnode + * an additional device property is needed. With typec switches the + * property is named "orientation-switch" (@id). The value of the device + * property is ignored. + */ + if (id && !fwnode_property_present(fwnode, id)) + return NULL; + + /* + * At this point we are sure that @fwnode is a typec switch in all + * cases. If the switch hasn't yet been registered for some reason, the + * function "defers probe" for now. + */ + dev = class_find_device(&typec_mux_class, NULL, fwnode, + switch_fwnode_match); + + return dev ? to_typec_switch_dev(dev) : ERR_PTR(-EPROBE_DEFER); +} + +/** + * fwnode_typec_switch_get - Find USB Type-C orientation switch + * @fwnode: The caller device node + * + * Finds a switch linked with @dev. Returns a reference to the switch on + * success, NULL if no matching connection was found, or + * ERR_PTR(-EPROBE_DEFER) when a connection was found but the switch + * has not been enumerated yet. + */ +struct typec_switch *fwnode_typec_switch_get(struct fwnode_handle *fwnode) +{ + struct typec_switch_dev *sw_devs[TYPEC_MUX_MAX_DEVS]; + struct typec_switch *sw; + int count; + int err; + int i; + + sw = kzalloc(sizeof(*sw), GFP_KERNEL); + if (!sw) + return ERR_PTR(-ENOMEM); + + count = fwnode_connection_find_matches(fwnode, "orientation-switch", NULL, + typec_switch_match, + (void **)sw_devs, + ARRAY_SIZE(sw_devs)); + if (count <= 0) { + kfree(sw); + return NULL; + } + + for (i = 0; i < count; i++) { + if (IS_ERR(sw_devs[i])) { + err = PTR_ERR(sw_devs[i]); + goto put_sw_devs; + } + } + + for (i = 0; i < count; i++) { + WARN_ON(!try_module_get(sw_devs[i]->dev.parent->driver->owner)); + sw->sw_devs[i] = sw_devs[i]; + } + + sw->num_sw_devs = count; + + return sw; + +put_sw_devs: + for (i = 0; i < count; i++) { + if (!IS_ERR(sw_devs[i])) + put_device(&sw_devs[i]->dev); + } + + kfree(sw); + + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(fwnode_typec_switch_get); + +/** + * typec_switch_put - Release USB Type-C orientation switch + * @sw: USB Type-C orientation switch + * + * Decrement reference count for @sw. + */ +void typec_switch_put(struct typec_switch *sw) +{ + struct typec_switch_dev *sw_dev; + unsigned int i; + + if (IS_ERR_OR_NULL(sw)) + return; + + for (i = 0; i < sw->num_sw_devs; i++) { + sw_dev = sw->sw_devs[i]; + + module_put(sw_dev->dev.parent->driver->owner); + put_device(&sw_dev->dev); + } + kfree(sw); +} +EXPORT_SYMBOL_GPL(typec_switch_put); + +static void typec_switch_release(struct device *dev) +{ + kfree(to_typec_switch_dev(dev)); +} + +const struct device_type typec_switch_dev_type = { + .name = "orientation_switch", + .release = typec_switch_release, +}; + +/** + * typec_switch_register - Register USB Type-C orientation switch + * @parent: Parent device + * @desc: Orientation switch description + * + * This function registers a switch that can be used for routing the correct + * data pairs depending on the cable plug orientation from the USB Type-C + * connector to the USB controllers. USB Type-C plugs can be inserted + * right-side-up or upside-down. + */ +struct typec_switch_dev * +typec_switch_register(struct device *parent, + const struct typec_switch_desc *desc) +{ + struct typec_switch_dev *sw_dev; + int ret; + + if (!desc || !desc->set) + return ERR_PTR(-EINVAL); + + sw_dev = kzalloc(sizeof(*sw_dev), GFP_KERNEL); + if (!sw_dev) + return ERR_PTR(-ENOMEM); + + sw_dev->set = desc->set; + + device_initialize(&sw_dev->dev); + sw_dev->dev.parent = parent; + sw_dev->dev.fwnode = desc->fwnode; + sw_dev->dev.class = &typec_mux_class; + sw_dev->dev.type = &typec_switch_dev_type; + sw_dev->dev.driver_data = desc->drvdata; + ret = dev_set_name(&sw_dev->dev, "%s-switch", desc->name ? desc->name : dev_name(parent)); + if (ret) { + put_device(&sw_dev->dev); + return ERR_PTR(ret); + } + + ret = device_add(&sw_dev->dev); + if (ret) { + dev_err(parent, "failed to register switch (%d)\n", ret); + put_device(&sw_dev->dev); + return ERR_PTR(ret); + } + + return sw_dev; +} +EXPORT_SYMBOL_GPL(typec_switch_register); + +int typec_switch_set(struct typec_switch *sw, + enum typec_orientation orientation) +{ + struct typec_switch_dev *sw_dev; + unsigned int i; + int ret; + + if (IS_ERR_OR_NULL(sw)) + return 0; + + for (i = 0; i < sw->num_sw_devs; i++) { + sw_dev = sw->sw_devs[i]; + + ret = sw_dev->set(sw_dev, orientation); + if (ret) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(typec_switch_set); + +/** + * typec_switch_unregister - Unregister USB Type-C orientation switch + * @sw_dev: USB Type-C orientation switch + * + * Unregister switch that was registered with typec_switch_register(). + */ +void typec_switch_unregister(struct typec_switch_dev *sw_dev) +{ + if (!IS_ERR_OR_NULL(sw_dev)) + device_unregister(&sw_dev->dev); +} +EXPORT_SYMBOL_GPL(typec_switch_unregister); + +void typec_switch_set_drvdata(struct typec_switch_dev *sw_dev, void *data) +{ + dev_set_drvdata(&sw_dev->dev, data); +} +EXPORT_SYMBOL_GPL(typec_switch_set_drvdata); + +void *typec_switch_get_drvdata(struct typec_switch_dev *sw_dev) +{ + return dev_get_drvdata(&sw_dev->dev); +} +EXPORT_SYMBOL_GPL(typec_switch_get_drvdata); + +/* ------------------------------------------------------------------------- */ + +struct typec_mux { + struct typec_mux_dev *mux_devs[TYPEC_MUX_MAX_DEVS]; + unsigned int num_mux_devs; +}; + +static int mux_fwnode_match(struct device *dev, const void *fwnode) +{ + if (!is_typec_mux_dev(dev)) + return 0; + + return device_match_fwnode(dev, fwnode); +} + +static void *typec_mux_match(const struct fwnode_handle *fwnode, + const char *id, void *data) +{ + struct device *dev; + + /* + * Device graph (OF graph) does not give any means to identify the + * device type or the device class of the remote port parent that @fwnode + * represents, so in order to identify the type or the class of @fwnode + * an additional device property is needed. With typec muxes the + * property is named "mode-switch" (@id). The value of the device + * property is ignored. + */ + if (id && !fwnode_property_present(fwnode, id)) + return NULL; + + dev = class_find_device(&typec_mux_class, NULL, fwnode, + mux_fwnode_match); + + return dev ? to_typec_mux_dev(dev) : ERR_PTR(-EPROBE_DEFER); +} + +/** + * fwnode_typec_mux_get - Find USB Type-C Multiplexer + * @fwnode: The caller device node + * + * Finds a mux linked to the caller. This function is primarily meant for the + * Type-C drivers. Returns a reference to the mux on success, NULL if no + * matching connection was found, or ERR_PTR(-EPROBE_DEFER) when a connection + * was found but the mux has not been enumerated yet. + */ +struct typec_mux *fwnode_typec_mux_get(struct fwnode_handle *fwnode) +{ + struct typec_mux_dev *mux_devs[TYPEC_MUX_MAX_DEVS]; + struct typec_mux *mux; + int count; + int err; + int i; + + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) + return ERR_PTR(-ENOMEM); + + count = fwnode_connection_find_matches(fwnode, "mode-switch", + NULL, typec_mux_match, + (void **)mux_devs, + ARRAY_SIZE(mux_devs)); + if (count <= 0) { + kfree(mux); + return NULL; + } + + for (i = 0; i < count; i++) { + if (IS_ERR(mux_devs[i])) { + err = PTR_ERR(mux_devs[i]); + goto put_mux_devs; + } + } + + for (i = 0; i < count; i++) { + WARN_ON(!try_module_get(mux_devs[i]->dev.parent->driver->owner)); + mux->mux_devs[i] = mux_devs[i]; + } + + mux->num_mux_devs = count; + + return mux; + +put_mux_devs: + for (i = 0; i < count; i++) { + if (!IS_ERR(mux_devs[i])) + put_device(&mux_devs[i]->dev); + } + + kfree(mux); + + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(fwnode_typec_mux_get); + +/** + * typec_mux_put - Release handle to a Multiplexer + * @mux: USB Type-C Connector Multiplexer/DeMultiplexer + * + * Decrements reference count for @mux. + */ +void typec_mux_put(struct typec_mux *mux) +{ + struct typec_mux_dev *mux_dev; + unsigned int i; + + if (IS_ERR_OR_NULL(mux)) + return; + + for (i = 0; i < mux->num_mux_devs; i++) { + mux_dev = mux->mux_devs[i]; + module_put(mux_dev->dev.parent->driver->owner); + put_device(&mux_dev->dev); + } + kfree(mux); +} +EXPORT_SYMBOL_GPL(typec_mux_put); + +int typec_mux_set(struct typec_mux *mux, struct typec_mux_state *state) +{ + struct typec_mux_dev *mux_dev; + unsigned int i; + int ret; + + if (IS_ERR_OR_NULL(mux)) + return 0; + + for (i = 0; i < mux->num_mux_devs; i++) { + mux_dev = mux->mux_devs[i]; + + ret = mux_dev->set(mux_dev, state); + if (ret) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(typec_mux_set); + +static void typec_mux_release(struct device *dev) +{ + kfree(to_typec_mux_dev(dev)); +} + +const struct device_type typec_mux_dev_type = { + .name = "mode_switch", + .release = typec_mux_release, +}; + +/** + * typec_mux_register - Register Multiplexer routing USB Type-C pins + * @parent: Parent device + * @desc: Multiplexer description + * + * USB Type-C connectors can be used for alternate modes of operation besides + * USB when Accessory/Alternate Modes are supported. With some of those modes, + * the pins on the connector need to be reconfigured. This function registers + * multiplexer switches routing the pins on the connector. + */ +struct typec_mux_dev * +typec_mux_register(struct device *parent, const struct typec_mux_desc *desc) +{ + struct typec_mux_dev *mux_dev; + int ret; + + if (!desc || !desc->set) + return ERR_PTR(-EINVAL); + + mux_dev = kzalloc(sizeof(*mux_dev), GFP_KERNEL); + if (!mux_dev) + return ERR_PTR(-ENOMEM); + + mux_dev->set = desc->set; + + device_initialize(&mux_dev->dev); + mux_dev->dev.parent = parent; + mux_dev->dev.fwnode = desc->fwnode; + mux_dev->dev.class = &typec_mux_class; + mux_dev->dev.type = &typec_mux_dev_type; + mux_dev->dev.driver_data = desc->drvdata; + ret = dev_set_name(&mux_dev->dev, "%s-mux", desc->name ? desc->name : dev_name(parent)); + if (ret) { + put_device(&mux_dev->dev); + return ERR_PTR(ret); + } + + ret = device_add(&mux_dev->dev); + if (ret) { + dev_err(parent, "failed to register mux (%d)\n", ret); + put_device(&mux_dev->dev); + return ERR_PTR(ret); + } + + return mux_dev; +} +EXPORT_SYMBOL_GPL(typec_mux_register); + +/** + * typec_mux_unregister - Unregister Multiplexer Switch + * @mux_dev: USB Type-C Connector Multiplexer/DeMultiplexer + * + * Unregister mux that was registered with typec_mux_register(). + */ +void typec_mux_unregister(struct typec_mux_dev *mux_dev) +{ + if (!IS_ERR_OR_NULL(mux_dev)) + device_unregister(&mux_dev->dev); +} +EXPORT_SYMBOL_GPL(typec_mux_unregister); + +void typec_mux_set_drvdata(struct typec_mux_dev *mux_dev, void *data) +{ + dev_set_drvdata(&mux_dev->dev, data); +} +EXPORT_SYMBOL_GPL(typec_mux_set_drvdata); + +void *typec_mux_get_drvdata(struct typec_mux_dev *mux_dev) +{ + return dev_get_drvdata(&mux_dev->dev); +} +EXPORT_SYMBOL_GPL(typec_mux_get_drvdata); + +struct class typec_mux_class = { + .name = "typec_mux", +}; diff --git a/drivers/usb/typec/mux.h b/drivers/usb/typec/mux.h new file mode 100644 index 0000000000..58f0f28b6d --- /dev/null +++ b/drivers/usb/typec/mux.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __USB_TYPEC_MUX__ +#define __USB_TYPEC_MUX__ + +#include <linux/usb/typec_mux.h> + +struct typec_switch_dev { + struct device dev; + typec_switch_set_fn_t set; +}; + +struct typec_mux_dev { + struct device dev; + typec_mux_set_fn_t set; +}; + +#define to_typec_switch_dev(_dev_) container_of(_dev_, struct typec_switch_dev, dev) +#define to_typec_mux_dev(_dev_) container_of(_dev_, struct typec_mux_dev, dev) + +extern const struct device_type typec_switch_dev_type; +extern const struct device_type typec_mux_dev_type; + +#define is_typec_switch_dev(dev) ((dev)->type == &typec_switch_dev_type) +#define is_typec_mux_dev(dev) ((dev)->type == &typec_mux_dev_type) + +#endif /* __USB_TYPEC_MUX__ */ diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig new file mode 100644 index 0000000000..65da61150b --- /dev/null +++ b/drivers/usb/typec/mux/Kconfig @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 + +menu "USB Type-C Multiplexer/DeMultiplexer Switch support" + +config TYPEC_MUX_FSA4480 + tristate "ON Semi FSA4480 Analog Audio Switch driver" + depends on I2C + select REGMAP_I2C + help + Driver for the ON Semiconductor FSA4480 Analog Audio Switch, which + provides support for muxing analog audio and sideband signals on a + common USB Type-C connector. + If compiled as a module, the module will be named fsa4480. + +config TYPEC_MUX_GPIO_SBU + tristate "Generic GPIO based SBU mux for USB Type-C applications" + help + Say Y or M if your system uses a GPIO based mux for managing the + connected state and the swapping of the SBU lines in a Type-C port. + +config TYPEC_MUX_PI3USB30532 + tristate "Pericom PI3USB30532 Type-C cross switch driver" + depends on I2C + help + Say Y or M if your system has a Pericom PI3USB30532 Type-C cross + switch / mux chip found on some devices with a Type-C port. + +config TYPEC_MUX_INTEL_PMC + tristate "Intel PMC mux control" + depends on ACPI + depends on INTEL_SCU_IPC + select USB_COMMON + select USB_ROLE_SWITCH + help + Driver for USB muxes controlled by Intel PMC FW. Intel PMC FW can + control the USB role switch and also the multiplexer/demultiplexer + switches used with USB Type-C Alternate Modes. + +config TYPEC_MUX_NB7VPQ904M + tristate "On Semiconductor NB7VPQ904M Type-C redriver driver" + depends on I2C + depends on DRM || DRM=n + select DRM_PANEL_BRIDGE if DRM + select REGMAP_I2C + help + Say Y or M if your system has a On Semiconductor NB7VPQ904M Type-C + redriver chip found on some devices with a Type-C port. + +endmenu diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile new file mode 100644 index 0000000000..76196096ef --- /dev/null +++ b/drivers/usb/typec/mux/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_TYPEC_MUX_FSA4480) += fsa4480.o +obj-$(CONFIG_TYPEC_MUX_GPIO_SBU) += gpio-sbu-mux.o +obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o +obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o +obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c new file mode 100644 index 0000000000..e0ee1f621a --- /dev/null +++ b/drivers/usb/typec/mux/fsa4480.c @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021-2022 Linaro Ltd. + * Copyright (C) 2018-2020 The Linux Foundation + */ + +#include <linux/bits.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_mux.h> + +#define FSA4480_SWITCH_ENABLE 0x04 +#define FSA4480_SWITCH_SELECT 0x05 +#define FSA4480_SWITCH_STATUS1 0x07 +#define FSA4480_SLOW_L 0x08 +#define FSA4480_SLOW_R 0x09 +#define FSA4480_SLOW_MIC 0x0a +#define FSA4480_SLOW_SENSE 0x0b +#define FSA4480_SLOW_GND 0x0c +#define FSA4480_DELAY_L_R 0x0d +#define FSA4480_DELAY_L_MIC 0x0e +#define FSA4480_DELAY_L_SENSE 0x0f +#define FSA4480_DELAY_L_AGND 0x10 +#define FSA4480_FUNCTION_ENABLE 0x12 +#define FSA4480_RESET 0x1e +#define FSA4480_MAX_REGISTER 0x1f + +#define FSA4480_ENABLE_DEVICE BIT(7) +#define FSA4480_ENABLE_SBU GENMASK(6, 5) +#define FSA4480_ENABLE_USB GENMASK(4, 3) +#define FSA4480_ENABLE_SENSE BIT(2) +#define FSA4480_ENABLE_MIC BIT(1) +#define FSA4480_ENABLE_AGND BIT(0) + +#define FSA4480_SEL_SBU_REVERSE GENMASK(6, 5) +#define FSA4480_SEL_USB GENMASK(4, 3) +#define FSA4480_SEL_SENSE BIT(2) +#define FSA4480_SEL_MIC BIT(1) +#define FSA4480_SEL_AGND BIT(0) + +#define FSA4480_ENABLE_AUTO_JACK_DETECT BIT(0) + +struct fsa4480 { + struct i2c_client *client; + + /* used to serialize concurrent change requests */ + struct mutex lock; + + struct typec_switch_dev *sw; + struct typec_mux_dev *mux; + + struct regmap *regmap; + + enum typec_orientation orientation; + unsigned long mode; + unsigned int svid; + + u8 cur_enable; +}; + +static const struct regmap_config fsa4480_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = FSA4480_MAX_REGISTER, + /* Accesses only done under fsa4480->lock */ + .disable_locking = true, +}; + +static int fsa4480_set(struct fsa4480 *fsa) +{ + bool reverse = (fsa->orientation == TYPEC_ORIENTATION_REVERSE); + u8 enable = FSA4480_ENABLE_DEVICE; + u8 sel = 0; + + /* USB Mode */ + if (fsa->mode < TYPEC_STATE_MODAL || + (!fsa->svid && (fsa->mode == TYPEC_MODE_USB2 || + fsa->mode == TYPEC_MODE_USB3))) { + enable |= FSA4480_ENABLE_USB; + sel = FSA4480_SEL_USB; + } else if (fsa->svid) { + switch (fsa->mode) { + /* DP Only */ + case TYPEC_DP_STATE_C: + case TYPEC_DP_STATE_E: + enable |= FSA4480_ENABLE_SBU; + if (reverse) + sel = FSA4480_SEL_SBU_REVERSE; + break; + + /* DP + USB */ + case TYPEC_DP_STATE_D: + case TYPEC_DP_STATE_F: + enable |= FSA4480_ENABLE_USB | FSA4480_ENABLE_SBU; + sel = FSA4480_SEL_USB; + if (reverse) + sel |= FSA4480_SEL_SBU_REVERSE; + break; + + default: + return -EOPNOTSUPP; + } + } else if (fsa->mode == TYPEC_MODE_AUDIO) { + /* Audio Accessory Mode, setup to auto Jack Detection */ + enable |= FSA4480_ENABLE_USB | FSA4480_ENABLE_AGND; + } else + return -EOPNOTSUPP; + + if (fsa->cur_enable & FSA4480_ENABLE_SBU) { + /* Disable SBU output while re-configuring the switch */ + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, + fsa->cur_enable & ~FSA4480_ENABLE_SBU); + + /* 35us to allow the SBU switch to turn off */ + usleep_range(35, 1000); + } + + regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, sel); + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, enable); + + /* Start AUDIO JACK DETECTION to setup MIC, AGND & Sense muxes */ + if (enable & FSA4480_ENABLE_AGND) + regmap_write(fsa->regmap, FSA4480_FUNCTION_ENABLE, + FSA4480_ENABLE_AUTO_JACK_DETECT); + + if (enable & FSA4480_ENABLE_SBU) { + /* 15us to allow the SBU switch to turn on again */ + usleep_range(15, 1000); + } + + fsa->cur_enable = enable; + + return 0; +} + +static int fsa4480_switch_set(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + struct fsa4480 *fsa = typec_switch_get_drvdata(sw); + int ret = 0; + + mutex_lock(&fsa->lock); + + if (fsa->orientation != orientation) { + fsa->orientation = orientation; + + ret = fsa4480_set(fsa); + } + + mutex_unlock(&fsa->lock); + + return ret; +} + +static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) +{ + struct fsa4480 *fsa = typec_mux_get_drvdata(mux); + int ret = 0; + + mutex_lock(&fsa->lock); + + if (fsa->mode != state->mode) { + fsa->mode = state->mode; + + if (state->alt) + fsa->svid = state->alt->svid; + else + fsa->svid = 0; // No SVID + + ret = fsa4480_set(fsa); + } + + mutex_unlock(&fsa->lock); + + return ret; +} + +static int fsa4480_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct typec_switch_desc sw_desc = { }; + struct typec_mux_desc mux_desc = { }; + struct fsa4480 *fsa; + + fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL); + if (!fsa) + return -ENOMEM; + + fsa->client = client; + mutex_init(&fsa->lock); + + fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config); + if (IS_ERR(fsa->regmap)) + return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n"); + + /* Safe mode */ + fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB; + fsa->mode = TYPEC_STATE_SAFE; + fsa->orientation = TYPEC_ORIENTATION_NONE; + + /* set default settings */ + regmap_write(fsa->regmap, FSA4480_SLOW_L, 0x00); + regmap_write(fsa->regmap, FSA4480_SLOW_R, 0x00); + regmap_write(fsa->regmap, FSA4480_SLOW_MIC, 0x00); + regmap_write(fsa->regmap, FSA4480_SLOW_SENSE, 0x00); + regmap_write(fsa->regmap, FSA4480_SLOW_GND, 0x00); + regmap_write(fsa->regmap, FSA4480_DELAY_L_R, 0x00); + regmap_write(fsa->regmap, FSA4480_DELAY_L_MIC, 0x00); + regmap_write(fsa->regmap, FSA4480_DELAY_L_SENSE, 0x00); + regmap_write(fsa->regmap, FSA4480_DELAY_L_AGND, 0x09); + regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, FSA4480_SEL_USB); + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable); + + sw_desc.drvdata = fsa; + sw_desc.fwnode = dev_fwnode(dev); + sw_desc.set = fsa4480_switch_set; + + fsa->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(fsa->sw)) + return dev_err_probe(dev, PTR_ERR(fsa->sw), "failed to register typec switch\n"); + + mux_desc.drvdata = fsa; + mux_desc.fwnode = dev_fwnode(dev); + mux_desc.set = fsa4480_mux_set; + + fsa->mux = typec_mux_register(dev, &mux_desc); + if (IS_ERR(fsa->mux)) { + typec_switch_unregister(fsa->sw); + return dev_err_probe(dev, PTR_ERR(fsa->mux), "failed to register typec mux\n"); + } + + i2c_set_clientdata(client, fsa); + return 0; +} + +static void fsa4480_remove(struct i2c_client *client) +{ + struct fsa4480 *fsa = i2c_get_clientdata(client); + + typec_mux_unregister(fsa->mux); + typec_switch_unregister(fsa->sw); +} + +static const struct i2c_device_id fsa4480_table[] = { + { "fsa4480" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fsa4480_table); + +static const struct of_device_id fsa4480_of_table[] = { + { .compatible = "fcs,fsa4480" }, + { } +}; +MODULE_DEVICE_TABLE(of, fsa4480_of_table); + +static struct i2c_driver fsa4480_driver = { + .driver = { + .name = "fsa4480", + .of_match_table = fsa4480_of_table, + }, + .probe = fsa4480_probe, + .remove = fsa4480_remove, + .id_table = fsa4480_table, +}; +module_i2c_driver(fsa4480_driver); + +MODULE_DESCRIPTION("ON Semiconductor FSA4480 driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/mux/gpio-sbu-mux.c b/drivers/usb/typec/mux/gpio-sbu-mux.c new file mode 100644 index 0000000000..ad60fd4e84 --- /dev/null +++ b/drivers/usb/typec/mux/gpio-sbu-mux.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Linaro Ltd. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/gpio/consumer.h> +#include <linux/platform_device.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_mux.h> + +struct gpio_sbu_mux { + struct gpio_desc *enable_gpio; + struct gpio_desc *select_gpio; + + struct typec_switch_dev *sw; + struct typec_mux_dev *mux; + + struct mutex lock; /* protect enabled and swapped */ + bool enabled; + bool swapped; +}; + +static int gpio_sbu_switch_set(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + struct gpio_sbu_mux *sbu_mux = typec_switch_get_drvdata(sw); + bool enabled; + bool swapped; + + mutex_lock(&sbu_mux->lock); + + enabled = sbu_mux->enabled; + swapped = sbu_mux->swapped; + + switch (orientation) { + case TYPEC_ORIENTATION_NONE: + enabled = false; + break; + case TYPEC_ORIENTATION_NORMAL: + swapped = false; + break; + case TYPEC_ORIENTATION_REVERSE: + swapped = true; + break; + } + + if (enabled != sbu_mux->enabled) + gpiod_set_value(sbu_mux->enable_gpio, enabled); + + if (swapped != sbu_mux->swapped) + gpiod_set_value(sbu_mux->select_gpio, swapped); + + sbu_mux->enabled = enabled; + sbu_mux->swapped = swapped; + + mutex_unlock(&sbu_mux->lock); + + return 0; +} + +static int gpio_sbu_mux_set(struct typec_mux_dev *mux, + struct typec_mux_state *state) +{ + struct gpio_sbu_mux *sbu_mux = typec_mux_get_drvdata(mux); + + mutex_lock(&sbu_mux->lock); + + switch (state->mode) { + case TYPEC_STATE_SAFE: + case TYPEC_STATE_USB: + sbu_mux->enabled = false; + break; + case TYPEC_DP_STATE_C: + case TYPEC_DP_STATE_D: + case TYPEC_DP_STATE_E: + sbu_mux->enabled = true; + break; + default: + break; + } + + gpiod_set_value(sbu_mux->enable_gpio, sbu_mux->enabled); + + mutex_unlock(&sbu_mux->lock); + + return 0; +} + +static int gpio_sbu_mux_probe(struct platform_device *pdev) +{ + struct typec_switch_desc sw_desc = { }; + struct typec_mux_desc mux_desc = { }; + struct device *dev = &pdev->dev; + struct gpio_sbu_mux *sbu_mux; + + sbu_mux = devm_kzalloc(dev, sizeof(*sbu_mux), GFP_KERNEL); + if (!sbu_mux) + return -ENOMEM; + + mutex_init(&sbu_mux->lock); + + sbu_mux->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(sbu_mux->enable_gpio)) + return dev_err_probe(dev, PTR_ERR(sbu_mux->enable_gpio), + "unable to acquire enable gpio\n"); + + sbu_mux->select_gpio = devm_gpiod_get(dev, "select", GPIOD_OUT_LOW); + if (IS_ERR(sbu_mux->select_gpio)) + return dev_err_probe(dev, PTR_ERR(sbu_mux->select_gpio), + "unable to acquire select gpio\n"); + + sw_desc.drvdata = sbu_mux; + sw_desc.fwnode = dev_fwnode(dev); + sw_desc.set = gpio_sbu_switch_set; + + sbu_mux->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(sbu_mux->sw)) + return dev_err_probe(dev, PTR_ERR(sbu_mux->sw), + "failed to register typec switch\n"); + + mux_desc.drvdata = sbu_mux; + mux_desc.fwnode = dev_fwnode(dev); + mux_desc.set = gpio_sbu_mux_set; + + sbu_mux->mux = typec_mux_register(dev, &mux_desc); + if (IS_ERR(sbu_mux->mux)) { + typec_switch_unregister(sbu_mux->sw); + return dev_err_probe(dev, PTR_ERR(sbu_mux->mux), + "failed to register typec mux\n"); + } + + platform_set_drvdata(pdev, sbu_mux); + + return 0; +} + +static void gpio_sbu_mux_remove(struct platform_device *pdev) +{ + struct gpio_sbu_mux *sbu_mux = platform_get_drvdata(pdev); + + gpiod_set_value(sbu_mux->enable_gpio, 0); + + typec_mux_unregister(sbu_mux->mux); + typec_switch_unregister(sbu_mux->sw); +} + +static const struct of_device_id gpio_sbu_mux_match[] = { + { .compatible = "gpio-sbu-mux", }, + {} +}; +MODULE_DEVICE_TABLE(of, gpio_sbu_mux_match); + +static struct platform_driver gpio_sbu_mux_driver = { + .probe = gpio_sbu_mux_probe, + .remove_new = gpio_sbu_mux_remove, + .driver = { + .name = "gpio_sbu_mux", + .of_match_table = gpio_sbu_mux_match, + }, +}; +module_platform_driver(gpio_sbu_mux_driver); + +MODULE_DESCRIPTION("GPIO based SBU mux driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c new file mode 100644 index 0000000000..60ed1f8091 --- /dev/null +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -0,0 +1,827 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Intel PMC USB mux control + * + * Copyright (C) 2020 Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/usb/pd.h> +#include <linux/usb/role.h> +#include <linux/usb/typec_mux.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_tbt.h> +#include <linux/debugfs.h> +#include <linux/usb.h> + +#include <asm/intel_scu_ipc.h> + +#define PMC_USBC_CMD 0xa7 + +/* Response status bits */ +#define PMC_USB_RESP_STATUS_FAILURE BIT(0) +#define PMC_USB_RESP_STATUS_FATAL BIT(1) + +/* "Usage" OOB Message field values */ +enum { + PMC_USB_CONNECT, + PMC_USB_DISCONNECT, + PMC_USB_SAFE_MODE, + PMC_USB_ALT_MODE, + PMC_USB_DP_HPD, +}; + +#define PMC_USB_MSG_USB2_PORT_SHIFT 0 +#define PMC_USB_MSG_USB3_PORT_SHIFT 4 +#define PMC_USB_MSG_UFP_SHIFT 4 +#define PMC_USB_MSG_ORI_HSL_SHIFT 5 +#define PMC_USB_MSG_ORI_AUX_SHIFT 6 + +/* Alt Mode Request */ +struct altmode_req { + u8 usage; + u8 mode_type; + u8 mode_id; + u8 reserved; + u32 mode_data; +} __packed; + +#define PMC_USB_MODE_TYPE_SHIFT 4 + +enum { + PMC_USB_MODE_TYPE_USB, + PMC_USB_MODE_TYPE_DP, + PMC_USB_MODE_TYPE_TBT, +}; + +/* Common Mode Data bits */ +#define PMC_USB_ALTMODE_RETIMER_CABLE BIT(2) + +#define PMC_USB_ALTMODE_ORI_SHIFT 1 +#define PMC_USB_ALTMODE_UFP_SHIFT 3 + +/* DP specific Mode Data bits */ +#define PMC_USB_ALTMODE_DP_MODE_SHIFT 8 + +/* TBT specific Mode Data bits */ +#define PMC_USB_ALTMODE_TBT_TYPE BIT(17) +#define PMC_USB_ALTMODE_CABLE_TYPE BIT(18) +#define PMC_USB_ALTMODE_ACTIVE_LINK BIT(20) +#define PMC_USB_ALTMODE_ACTIVE_CABLE BIT(22) +#define PMC_USB_ALTMODE_FORCE_LSR BIT(23) +#define PMC_USB_ALTMODE_CABLE_SPD(_s_) (((_s_) & GENMASK(2, 0)) << 25) +#define PMC_USB_ALTMODE_CABLE_USB31 1 +#define PMC_USB_ALTMODE_CABLE_10GPS 2 +#define PMC_USB_ALTMODE_CABLE_20GPS 3 +#define PMC_USB_ALTMODE_TBT_GEN(_g_) (((_g_) & GENMASK(1, 0)) << 28) + +/* Display HPD Request bits */ +#define PMC_USB_DP_HPD_LVL BIT(4) +#define PMC_USB_DP_HPD_IRQ BIT(5) + +/* + * Input Output Manager (IOM) PORT STATUS + */ +#define IOM_PORT_STATUS_ACTIVITY_TYPE_MASK GENMASK(9, 6) +#define IOM_PORT_STATUS_ACTIVITY_TYPE_SHIFT 6 +#define IOM_PORT_STATUS_ACTIVITY_TYPE_USB 0x03 +/* activity type: Safe Mode */ +#define IOM_PORT_STATUS_ACTIVITY_TYPE_SAFE_MODE 0x04 +/* activity type: Display Port */ +#define IOM_PORT_STATUS_ACTIVITY_TYPE_DP 0x05 +/* activity type: Display Port Multi Function Device */ +#define IOM_PORT_STATUS_ACTIVITY_TYPE_DP_MFD 0x06 +/* activity type: Thunderbolt */ +#define IOM_PORT_STATUS_ACTIVITY_TYPE_TBT 0x07 +#define IOM_PORT_STATUS_ACTIVITY_TYPE_ALT_MODE_USB 0x0c +#define IOM_PORT_STATUS_ACTIVITY_TYPE_ALT_MODE_TBT_USB 0x0d +/* Upstream Facing Port Information */ +#define IOM_PORT_STATUS_UFP BIT(10) +/* Display Port Hot Plug Detect status */ +#define IOM_PORT_STATUS_DHPD_HPD_STATUS_MASK GENMASK(13, 12) +#define IOM_PORT_STATUS_DHPD_HPD_STATUS_SHIFT 12 +#define IOM_PORT_STATUS_DHPD_HPD_STATUS_ASSERT 0x01 +#define IOM_PORT_STATUS_DHPD_HPD_SOURCE_TBT BIT(14) +#define IOM_PORT_STATUS_CONNECTED BIT(31) + +#define IOM_PORT_ACTIVITY_IS(_status_, _type_) \ + ((((_status_) & IOM_PORT_STATUS_ACTIVITY_TYPE_MASK) >> \ + IOM_PORT_STATUS_ACTIVITY_TYPE_SHIFT) == \ + (IOM_PORT_STATUS_ACTIVITY_TYPE_##_type_)) + +#define IOM_PORT_HPD_ASSERTED(_status_) \ + ((((_status_) & IOM_PORT_STATUS_DHPD_HPD_STATUS_MASK) >> \ + IOM_PORT_STATUS_DHPD_HPD_STATUS_SHIFT) & \ + IOM_PORT_STATUS_DHPD_HPD_STATUS_ASSERT) + +/* IOM port status register */ +#define IOM_PORT_STATUS_REGS(_offset_, _size_) ((_offset_) | (_size_)) +#define IOM_PORT_STATUS_REGS_SZ_MASK BIT(0) +#define IOM_PORT_STATUS_REGS_SZ_4 0 +#define IOM_PORT_STATUS_REGS_SZ_8 1 +#define IOM_PORT_STATUS_REGS_OFFSET(_d_) \ + ((_d_) & ~IOM_PORT_STATUS_REGS_SZ_MASK) +#define IOM_PORT_STATUS_REGS_SIZE(_d_) \ + (4 << ((_d_) & IOM_PORT_STATUS_REGS_SZ_MASK)) + +struct pmc_usb; + +struct pmc_usb_port { + int num; + u32 iom_status; + struct pmc_usb *pmc; + struct typec_mux_dev *typec_mux; + struct typec_switch_dev *typec_sw; + struct usb_role_switch *usb_sw; + + enum typec_orientation orientation; + enum usb_role role; + + u8 usb2_port; + u8 usb3_port; + + enum typec_orientation sbu_orientation; + enum typec_orientation hsl_orientation; +}; + +struct pmc_usb { + u8 num_ports; + struct device *dev; + struct intel_scu_ipc_dev *ipc; + struct pmc_usb_port *port; + struct acpi_device *iom_adev; + void __iomem *iom_base; + u32 iom_port_status_offset; + u8 iom_port_status_size; + + struct dentry *dentry; +}; + +static struct dentry *pmc_mux_debugfs_root; + +static void update_port_status(struct pmc_usb_port *port) +{ + u8 port_num; + + /* SoC expects the USB Type-C port numbers to start with 0 */ + port_num = port->usb3_port - 1; + + port->iom_status = readl(port->pmc->iom_base + + port->pmc->iom_port_status_offset + + port_num * port->pmc->iom_port_status_size); +} + +static int sbu_orientation(struct pmc_usb_port *port) +{ + if (port->sbu_orientation) + return port->sbu_orientation - 1; + + return port->orientation - 1; +} + +static int hsl_orientation(struct pmc_usb_port *port) +{ + if (port->hsl_orientation) + return port->hsl_orientation - 1; + + return port->orientation - 1; +} + +static int pmc_usb_send_command(struct intel_scu_ipc_dev *ipc, u8 *msg, u32 len) +{ + u8 response[4]; + u8 status_res; + int ret; + + /* + * Error bit will always be 0 with the USBC command. + * Status can be checked from the response message if the + * function intel_scu_ipc_dev_command succeeds. + */ + ret = intel_scu_ipc_dev_command(ipc, PMC_USBC_CMD, 0, msg, + len, response, sizeof(response)); + + if (ret) + return ret; + + status_res = (msg[0] & 0xf) < PMC_USB_SAFE_MODE ? + response[2] : response[1]; + + if (status_res & PMC_USB_RESP_STATUS_FAILURE) { + if (status_res & PMC_USB_RESP_STATUS_FATAL) + return -EIO; + + return -EBUSY; + } + + return 0; +} + +static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len) +{ + int retry_count = 3; + int ret; + + /* + * If PMC is busy then retry the command once again + */ + while (retry_count--) { + ret = pmc_usb_send_command(port->pmc->ipc, msg, len); + if (ret != -EBUSY) + break; + } + + return ret; +} + +static int +pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_displayport_data *dp) +{ + u8 msg[2] = { }; + int ret; + + msg[0] = PMC_USB_DP_HPD; + msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; + + /* Configure HPD first if HPD,IRQ comes together */ + if (!IOM_PORT_HPD_ASSERTED(port->iom_status) && + dp->status & DP_STATUS_IRQ_HPD && + dp->status & DP_STATUS_HPD_STATE) { + msg[1] = PMC_USB_DP_HPD_LVL; + ret = pmc_usb_command(port, msg, sizeof(msg)); + if (ret) + return ret; + } + + if (dp->status & DP_STATUS_IRQ_HPD) + msg[1] = PMC_USB_DP_HPD_IRQ; + + if (dp->status & DP_STATUS_HPD_STATE) + msg[1] |= PMC_USB_DP_HPD_LVL; + + return pmc_usb_command(port, msg, sizeof(msg)); +} + +static int +pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) +{ + struct typec_displayport_data *data = state->data; + struct altmode_req req = { }; + int ret; + + if (IOM_PORT_ACTIVITY_IS(port->iom_status, DP) || + IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) { + if (IOM_PORT_HPD_ASSERTED(port->iom_status) && + (!(data->status & DP_STATUS_IRQ_HPD) && + data->status & DP_STATUS_HPD_STATE)) + return 0; + + return pmc_usb_mux_dp_hpd(port, state->data); + } + + req.usage = PMC_USB_ALT_MODE; + req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; + req.mode_type = PMC_USB_MODE_TYPE_DP << PMC_USB_MODE_TYPE_SHIFT; + + req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT; + req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT; + + req.mode_data |= (state->mode - TYPEC_STATE_MODAL) << + PMC_USB_ALTMODE_DP_MODE_SHIFT; + + ret = pmc_usb_command(port, (void *)&req, sizeof(req)); + if (ret) + return ret; + + if (data->status & (DP_STATUS_IRQ_HPD | DP_STATUS_HPD_STATE)) + return pmc_usb_mux_dp_hpd(port, state->data); + + return 0; +} + +static int +pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state) +{ + struct typec_thunderbolt_data *data = state->data; + u8 cable_rounded = TBT_CABLE_ROUNDED_SUPPORT(data->cable_mode); + u8 cable_speed = TBT_CABLE_SPEED(data->cable_mode); + struct altmode_req req = { }; + + if (IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) || + IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) + return 0; + + req.usage = PMC_USB_ALT_MODE; + req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; + req.mode_type = PMC_USB_MODE_TYPE_TBT << PMC_USB_MODE_TYPE_SHIFT; + + req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT; + req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT; + + if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3) + req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE; + + if (data->cable_mode & TBT_CABLE_OPTICAL) + req.mode_data |= PMC_USB_ALTMODE_CABLE_TYPE; + + if (data->cable_mode & TBT_CABLE_LINK_TRAINING) + req.mode_data |= PMC_USB_ALTMODE_ACTIVE_LINK; + + if (acpi_dev_hid_uid_match(port->pmc->iom_adev, "INTC1072", NULL) || + acpi_dev_hid_uid_match(port->pmc->iom_adev, "INTC1079", NULL)) { + if ((data->enter_vdo & TBT_ENTER_MODE_ACTIVE_CABLE) || + (data->cable_mode & TBT_CABLE_RETIMER)) + req.mode_data |= PMC_USB_ALTMODE_RETIMER_CABLE; + } else { + if (data->enter_vdo & TBT_ENTER_MODE_ACTIVE_CABLE) + req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE; + + if (data->cable_mode & TBT_CABLE_RETIMER) + req.mode_data |= PMC_USB_ALTMODE_RETIMER_CABLE; + } + + req.mode_data |= PMC_USB_ALTMODE_CABLE_SPD(cable_speed); + + req.mode_data |= PMC_USB_ALTMODE_TBT_GEN(cable_rounded); + + return pmc_usb_command(port, (void *)&req, sizeof(req)); +} + +static int +pmc_usb_mux_usb4(struct pmc_usb_port *port, struct typec_mux_state *state) +{ + struct enter_usb_data *data = state->data; + struct altmode_req req = { }; + u8 cable_speed; + + if (IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) || + IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) + return 0; + + req.usage = PMC_USB_ALT_MODE; + req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; + req.mode_type = PMC_USB_MODE_TYPE_TBT << PMC_USB_MODE_TYPE_SHIFT; + + /* USB4 Mode */ + req.mode_data = PMC_USB_ALTMODE_FORCE_LSR; + + if (data->active_link_training) + req.mode_data |= PMC_USB_ALTMODE_ACTIVE_LINK; + + req.mode_data |= (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT; + req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT; + + switch ((data->eudo & EUDO_CABLE_TYPE_MASK) >> EUDO_CABLE_TYPE_SHIFT) { + case EUDO_CABLE_TYPE_PASSIVE: + break; + case EUDO_CABLE_TYPE_OPTICAL: + req.mode_data |= PMC_USB_ALTMODE_CABLE_TYPE; + fallthrough; + case EUDO_CABLE_TYPE_RE_TIMER: + if (!acpi_dev_hid_uid_match(port->pmc->iom_adev, "INTC1072", NULL) || + !acpi_dev_hid_uid_match(port->pmc->iom_adev, "INTC1079", NULL)) + req.mode_data |= PMC_USB_ALTMODE_RETIMER_CABLE; + fallthrough; + default: + if (acpi_dev_hid_uid_match(port->pmc->iom_adev, "INTC1072", NULL) || + acpi_dev_hid_uid_match(port->pmc->iom_adev, "INTC1079", NULL)) + req.mode_data |= PMC_USB_ALTMODE_RETIMER_CABLE; + else + req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE; + + /* Configure data rate to rounded in the case of Active TBT3 + * and USB4 cables. + */ + req.mode_data |= PMC_USB_ALTMODE_TBT_GEN(1); + break; + } + + cable_speed = (data->eudo & EUDO_CABLE_SPEED_MASK) >> EUDO_CABLE_SPEED_SHIFT; + req.mode_data |= PMC_USB_ALTMODE_CABLE_SPD(cable_speed); + + return pmc_usb_command(port, (void *)&req, sizeof(req)); +} + +static int pmc_usb_mux_safe_state(struct pmc_usb_port *port, + struct typec_mux_state *state) +{ + u8 msg; + + if (IOM_PORT_ACTIVITY_IS(port->iom_status, SAFE_MODE)) + return 0; + + if ((IOM_PORT_ACTIVITY_IS(port->iom_status, DP) || + IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) && + state->alt && state->alt->svid == USB_TYPEC_DP_SID) + return 0; + + if ((IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) || + IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) && + state->alt && state->alt->svid == USB_TYPEC_TBT_SID) + return 0; + + msg = PMC_USB_SAFE_MODE; + msg |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; + + return pmc_usb_command(port, &msg, sizeof(msg)); +} + +static int pmc_usb_disconnect(struct pmc_usb_port *port) +{ + struct typec_displayport_data data = { }; + u8 msg[2]; + + if (!(port->iom_status & IOM_PORT_STATUS_CONNECTED)) + return 0; + + /* Clear DisplayPort HPD if it's still asserted. */ + if (IOM_PORT_HPD_ASSERTED(port->iom_status)) + pmc_usb_mux_dp_hpd(port, &data); + + msg[0] = PMC_USB_DISCONNECT; + msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; + + msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT; + + return pmc_usb_command(port, msg, sizeof(msg)); +} + +static int pmc_usb_connect(struct pmc_usb_port *port, enum usb_role role) +{ + u8 ufp = role == USB_ROLE_DEVICE ? 1 : 0; + u8 msg[2]; + int ret; + + if (port->orientation == TYPEC_ORIENTATION_NONE) + return -EINVAL; + + if (port->iom_status & IOM_PORT_STATUS_CONNECTED) { + if (port->role == role || port->role == USB_ROLE_NONE) + return 0; + + /* Role swap */ + ret = pmc_usb_disconnect(port); + if (ret) + return ret; + } + + msg[0] = PMC_USB_CONNECT; + msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; + + msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT; + msg[1] |= ufp << PMC_USB_MSG_UFP_SHIFT; + msg[1] |= hsl_orientation(port) << PMC_USB_MSG_ORI_HSL_SHIFT; + msg[1] |= sbu_orientation(port) << PMC_USB_MSG_ORI_AUX_SHIFT; + + return pmc_usb_command(port, msg, sizeof(msg)); +} + +static int +pmc_usb_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) +{ + struct pmc_usb_port *port = typec_mux_get_drvdata(mux); + + update_port_status(port); + + if (port->orientation == TYPEC_ORIENTATION_NONE || port->role == USB_ROLE_NONE) + return 0; + + if (state->mode == TYPEC_STATE_SAFE) + return pmc_usb_mux_safe_state(port, state); + if (state->mode == TYPEC_STATE_USB) + return pmc_usb_connect(port, port->role); + + if (state->alt) { + switch (state->alt->svid) { + case USB_TYPEC_TBT_SID: + return pmc_usb_mux_tbt(port, state); + case USB_TYPEC_DP_SID: + return pmc_usb_mux_dp(port, state); + } + } else { + switch (state->mode) { + case TYPEC_MODE_USB2: + /* REVISIT: Try with usb3_port set to 0? */ + break; + case TYPEC_MODE_USB3: + return pmc_usb_connect(port, port->role); + case TYPEC_MODE_USB4: + return pmc_usb_mux_usb4(port, state); + } + } + + return -EOPNOTSUPP; +} + +static int pmc_usb_set_orientation(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + struct pmc_usb_port *port = typec_switch_get_drvdata(sw); + + update_port_status(port); + + port->orientation = orientation; + + return 0; +} + +static int pmc_usb_set_role(struct usb_role_switch *sw, enum usb_role role) +{ + struct pmc_usb_port *port = usb_role_switch_get_drvdata(sw); + int ret; + + update_port_status(port); + + if (role == USB_ROLE_NONE) + ret = pmc_usb_disconnect(port); + else + ret = pmc_usb_connect(port, role); + + port->role = role; + + return ret; +} + +static int pmc_usb_register_port(struct pmc_usb *pmc, int index, + struct fwnode_handle *fwnode) +{ + struct pmc_usb_port *port = &pmc->port[index]; + struct usb_role_switch_desc desc = { }; + struct typec_switch_desc sw_desc = { }; + struct typec_mux_desc mux_desc = { }; + const char *str; + int ret; + + ret = fwnode_property_read_u8(fwnode, "usb2-port-number", &port->usb2_port); + if (ret) + return ret; + + ret = fwnode_property_read_u8(fwnode, "usb3-port-number", &port->usb3_port); + if (ret) + return ret; + + ret = fwnode_property_read_string(fwnode, "sbu-orientation", &str); + if (!ret) + port->sbu_orientation = typec_find_orientation(str); + + ret = fwnode_property_read_string(fwnode, "hsl-orientation", &str); + if (!ret) + port->hsl_orientation = typec_find_orientation(str); + + port->num = index; + port->pmc = pmc; + + sw_desc.fwnode = fwnode; + sw_desc.drvdata = port; + sw_desc.name = fwnode_get_name(fwnode); + sw_desc.set = pmc_usb_set_orientation; + + port->typec_sw = typec_switch_register(pmc->dev, &sw_desc); + if (IS_ERR(port->typec_sw)) + return PTR_ERR(port->typec_sw); + + mux_desc.fwnode = fwnode; + mux_desc.drvdata = port; + mux_desc.name = fwnode_get_name(fwnode); + mux_desc.set = pmc_usb_mux_set; + + port->typec_mux = typec_mux_register(pmc->dev, &mux_desc); + if (IS_ERR(port->typec_mux)) { + ret = PTR_ERR(port->typec_mux); + goto err_unregister_switch; + } + + desc.fwnode = fwnode; + desc.driver_data = port; + desc.name = fwnode_get_name(fwnode); + desc.set = pmc_usb_set_role; + + port->usb_sw = usb_role_switch_register(pmc->dev, &desc); + if (IS_ERR(port->usb_sw)) { + ret = PTR_ERR(port->usb_sw); + goto err_unregister_mux; + } + + return 0; + +err_unregister_mux: + typec_mux_unregister(port->typec_mux); + +err_unregister_switch: + typec_switch_unregister(port->typec_sw); + + return ret; +} + +/* IOM ACPI IDs and IOM_PORT_STATUS_OFFSET */ +static const struct acpi_device_id iom_acpi_ids[] = { + /* TigerLake */ + { "INTC1072", IOM_PORT_STATUS_REGS(0x560, IOM_PORT_STATUS_REGS_SZ_4) }, + + /* AlderLake */ + { "INTC1079", IOM_PORT_STATUS_REGS(0x160, IOM_PORT_STATUS_REGS_SZ_4) }, + + /* Meteor Lake */ + { "INTC107A", IOM_PORT_STATUS_REGS(0x160, IOM_PORT_STATUS_REGS_SZ_4) }, + + /* Lunar Lake */ + { "INTC10EA", IOM_PORT_STATUS_REGS(0x150, IOM_PORT_STATUS_REGS_SZ_8) }, + {} +}; + +static int pmc_usb_probe_iom(struct pmc_usb *pmc) +{ + struct list_head resource_list; + struct resource_entry *rentry; + static const struct acpi_device_id *dev_id; + struct acpi_device *adev = NULL; + int ret; + + for (dev_id = &iom_acpi_ids[0]; dev_id->id[0]; dev_id++) { + adev = acpi_dev_get_first_match_dev(dev_id->id, NULL, -1); + if (adev) + break; + } + if (!adev) + return -ENODEV; + + pmc->iom_port_status_offset = IOM_PORT_STATUS_REGS_OFFSET(dev_id->driver_data); + pmc->iom_port_status_size = IOM_PORT_STATUS_REGS_SIZE(dev_id->driver_data); + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_memory_resources(adev, &resource_list); + if (ret < 0) { + acpi_dev_put(adev); + return ret; + } + + rentry = list_first_entry_or_null(&resource_list, struct resource_entry, node); + if (rentry) + pmc->iom_base = devm_ioremap_resource(pmc->dev, rentry->res); + + acpi_dev_free_resource_list(&resource_list); + + if (!pmc->iom_base) { + acpi_dev_put(adev); + return -ENOMEM; + } + + if (IS_ERR(pmc->iom_base)) { + acpi_dev_put(adev); + return PTR_ERR(pmc->iom_base); + } + + pmc->iom_adev = adev; + + return 0; +} + +static int port_iom_status_show(struct seq_file *s, void *unused) +{ + struct pmc_usb_port *port = s->private; + + update_port_status(port); + seq_printf(s, "0x%08x\n", port->iom_status); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(port_iom_status); + +static void pmc_mux_port_debugfs_init(struct pmc_usb_port *port) +{ + struct dentry *debugfs_dir; + char name[6]; + + snprintf(name, sizeof(name), "port%d", port->usb3_port - 1); + + debugfs_dir = debugfs_create_dir(name, port->pmc->dentry); + debugfs_create_file("iom_status", 0400, debugfs_dir, port, + &port_iom_status_fops); +} + +static int pmc_usb_probe(struct platform_device *pdev) +{ + struct fwnode_handle *fwnode = NULL; + struct pmc_usb *pmc; + int i = 0; + int ret; + + pmc = devm_kzalloc(&pdev->dev, sizeof(*pmc), GFP_KERNEL); + if (!pmc) + return -ENOMEM; + + device_for_each_child_node(&pdev->dev, fwnode) + pmc->num_ports++; + + /* The IOM microcontroller has a limitation of max 4 ports. */ + if (pmc->num_ports > 4) { + dev_err(&pdev->dev, "driver limited to 4 ports\n"); + return -ERANGE; + } + + pmc->port = devm_kcalloc(&pdev->dev, pmc->num_ports, + sizeof(struct pmc_usb_port), GFP_KERNEL); + if (!pmc->port) + return -ENOMEM; + + pmc->ipc = devm_intel_scu_ipc_dev_get(&pdev->dev); + if (!pmc->ipc) + return -ENODEV; + + pmc->dev = &pdev->dev; + + ret = pmc_usb_probe_iom(pmc); + if (ret) + return ret; + + pmc->dentry = debugfs_create_dir(dev_name(pmc->dev), pmc_mux_debugfs_root); + + /* + * For every physical USB connector (USB2 and USB3 combo) there is a + * child ACPI device node under the PMC mux ACPI device object. + */ + for (i = 0; i < pmc->num_ports; i++) { + fwnode = device_get_next_child_node(pmc->dev, fwnode); + if (!fwnode) + break; + + ret = pmc_usb_register_port(pmc, i, fwnode); + if (ret) { + fwnode_handle_put(fwnode); + goto err_remove_ports; + } + + pmc_mux_port_debugfs_init(&pmc->port[i]); + } + + platform_set_drvdata(pdev, pmc); + + return 0; + +err_remove_ports: + for (i = 0; i < pmc->num_ports; i++) { + typec_switch_unregister(pmc->port[i].typec_sw); + typec_mux_unregister(pmc->port[i].typec_mux); + usb_role_switch_unregister(pmc->port[i].usb_sw); + } + + acpi_dev_put(pmc->iom_adev); + + debugfs_remove(pmc->dentry); + + return ret; +} + +static void pmc_usb_remove(struct platform_device *pdev) +{ + struct pmc_usb *pmc = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < pmc->num_ports; i++) { + typec_switch_unregister(pmc->port[i].typec_sw); + typec_mux_unregister(pmc->port[i].typec_mux); + usb_role_switch_unregister(pmc->port[i].usb_sw); + } + + acpi_dev_put(pmc->iom_adev); + + debugfs_remove(pmc->dentry); +} + +static const struct acpi_device_id pmc_usb_acpi_ids[] = { + { "INTC105C", }, + { } +}; +MODULE_DEVICE_TABLE(acpi, pmc_usb_acpi_ids); + +static struct platform_driver pmc_usb_driver = { + .driver = { + .name = "intel_pmc_usb", + .acpi_match_table = ACPI_PTR(pmc_usb_acpi_ids), + }, + .probe = pmc_usb_probe, + .remove_new = pmc_usb_remove, +}; + +static int __init pmc_usb_init(void) +{ + pmc_mux_debugfs_root = debugfs_create_dir("intel_pmc_mux", usb_debug_root); + + return platform_driver_register(&pmc_usb_driver); +} +module_init(pmc_usb_init); + +static void __exit pmc_usb_exit(void) +{ + platform_driver_unregister(&pmc_usb_driver); + debugfs_remove(pmc_mux_debugfs_root); +} +module_exit(pmc_usb_exit); + +MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel PMC USB mux control"); diff --git a/drivers/usb/typec/mux/nb7vpq904m.c b/drivers/usb/typec/mux/nb7vpq904m.c new file mode 100644 index 0000000000..cda206cf0c --- /dev/null +++ b/drivers/usb/typec/mux/nb7vpq904m.c @@ -0,0 +1,540 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * OnSemi NB7VPQ904M Type-C driver + * + * Copyright (C) 2023 Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + */ +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/bitfield.h> +#include <linux/of_graph.h> +#include <drm/drm_bridge.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_mux.h> +#include <linux/usb/typec_retimer.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> + +#define NB7_CHNA 0 +#define NB7_CHNB 1 +#define NB7_CHNC 2 +#define NB7_CHND 3 +#define NB7_IS_CHAN_AD(channel) (channel == NB7_CHNA || channel == NB7_CHND) + +#define GEN_DEV_SET_REG 0x00 + +#define GEN_DEV_SET_CHIP_EN BIT(0) +#define GEN_DEV_SET_CHNA_EN BIT(4) +#define GEN_DEV_SET_CHNB_EN BIT(5) +#define GEN_DEV_SET_CHNC_EN BIT(6) +#define GEN_DEV_SET_CHND_EN BIT(7) + +#define GEN_DEV_SET_OP_MODE_MASK GENMASK(3, 1) + +#define GEN_DEV_SET_OP_MODE_DP_CC2 0 +#define GEN_DEV_SET_OP_MODE_DP_CC1 1 +#define GEN_DEV_SET_OP_MODE_DP_4LANE 2 +#define GEN_DEV_SET_OP_MODE_USB 5 + +#define EQ_SETTING_REG_BASE 0x01 +#define EQ_SETTING_REG(n) (EQ_SETTING_REG_BASE + (n) * 2) +#define EQ_SETTING_MASK GENMASK(3, 1) + +#define OUTPUT_COMPRESSION_AND_POL_REG_BASE 0x02 +#define OUTPUT_COMPRESSION_AND_POL_REG(n) (OUTPUT_COMPRESSION_AND_POL_REG_BASE + (n) * 2) +#define OUTPUT_COMPRESSION_MASK GENMASK(2, 1) + +#define FLAT_GAIN_REG_BASE 0x18 +#define FLAT_GAIN_REG(n) (FLAT_GAIN_REG_BASE + (n) * 2) +#define FLAT_GAIN_MASK GENMASK(1, 0) + +#define LOSS_MATCH_REG_BASE 0x19 +#define LOSS_MATCH_REG(n) (LOSS_MATCH_REG_BASE + (n) * 2) +#define LOSS_MATCH_MASK GENMASK(1, 0) + +#define AUX_CC_REG 0x09 + +#define CHIP_VERSION_REG 0x17 + +struct nb7vpq904m { + struct i2c_client *client; + struct gpio_desc *enable_gpio; + struct regulator *vcc_supply; + struct regmap *regmap; + struct typec_switch_dev *sw; + struct typec_retimer *retimer; + + bool swap_data_lanes; + struct typec_switch *typec_switch; + + struct drm_bridge bridge; + + struct mutex lock; /* protect non-concurrent retimer & switch */ + + enum typec_orientation orientation; + unsigned long mode; + unsigned int svid; +}; + +static void nb7vpq904m_set_channel(struct nb7vpq904m *nb7, unsigned int channel, bool dp) +{ + u8 eq, out_comp, flat_gain, loss_match; + + if (dp) { + eq = NB7_IS_CHAN_AD(channel) ? 0x6 : 0x4; + out_comp = 0x3; + flat_gain = NB7_IS_CHAN_AD(channel) ? 0x2 : 0x1; + loss_match = 0x3; + } else { + eq = 0x4; + out_comp = 0x3; + flat_gain = NB7_IS_CHAN_AD(channel) ? 0x3 : 0x1; + loss_match = NB7_IS_CHAN_AD(channel) ? 0x1 : 0x3; + } + + regmap_update_bits(nb7->regmap, EQ_SETTING_REG(channel), + EQ_SETTING_MASK, FIELD_PREP(EQ_SETTING_MASK, eq)); + regmap_update_bits(nb7->regmap, OUTPUT_COMPRESSION_AND_POL_REG(channel), + OUTPUT_COMPRESSION_MASK, FIELD_PREP(OUTPUT_COMPRESSION_MASK, out_comp)); + regmap_update_bits(nb7->regmap, FLAT_GAIN_REG(channel), + FLAT_GAIN_MASK, FIELD_PREP(FLAT_GAIN_MASK, flat_gain)); + regmap_update_bits(nb7->regmap, LOSS_MATCH_REG(channel), + LOSS_MATCH_MASK, FIELD_PREP(LOSS_MATCH_MASK, loss_match)); +} + +static int nb7vpq904m_set(struct nb7vpq904m *nb7) +{ + bool reverse = (nb7->orientation == TYPEC_ORIENTATION_REVERSE); + + switch (nb7->mode) { + case TYPEC_STATE_SAFE: + regmap_write(nb7->regmap, GEN_DEV_SET_REG, + GEN_DEV_SET_CHIP_EN | + GEN_DEV_SET_CHNA_EN | + GEN_DEV_SET_CHNB_EN | + GEN_DEV_SET_CHNC_EN | + GEN_DEV_SET_CHND_EN | + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK, + GEN_DEV_SET_OP_MODE_USB)); + nb7vpq904m_set_channel(nb7, NB7_CHNA, false); + nb7vpq904m_set_channel(nb7, NB7_CHNB, false); + nb7vpq904m_set_channel(nb7, NB7_CHNC, false); + nb7vpq904m_set_channel(nb7, NB7_CHND, false); + regmap_write(nb7->regmap, AUX_CC_REG, 0x2); + + return 0; + + case TYPEC_STATE_USB: + /* + * Normal Orientation (CC1) + * A -> USB RX + * B -> USB TX + * C -> X + * D -> X + * Flipped Orientation (CC2) + * A -> X + * B -> X + * C -> USB TX + * D -> USB RX + * + * Reversed if data lanes are swapped + */ + if (reverse ^ nb7->swap_data_lanes) { + regmap_write(nb7->regmap, GEN_DEV_SET_REG, + GEN_DEV_SET_CHIP_EN | + GEN_DEV_SET_CHNA_EN | + GEN_DEV_SET_CHNB_EN | + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK, + GEN_DEV_SET_OP_MODE_USB)); + nb7vpq904m_set_channel(nb7, NB7_CHNA, false); + nb7vpq904m_set_channel(nb7, NB7_CHNB, false); + } else { + regmap_write(nb7->regmap, GEN_DEV_SET_REG, + GEN_DEV_SET_CHIP_EN | + GEN_DEV_SET_CHNC_EN | + GEN_DEV_SET_CHND_EN | + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK, + GEN_DEV_SET_OP_MODE_USB)); + nb7vpq904m_set_channel(nb7, NB7_CHNC, false); + nb7vpq904m_set_channel(nb7, NB7_CHND, false); + } + regmap_write(nb7->regmap, AUX_CC_REG, 0x2); + + return 0; + + default: + if (nb7->svid != USB_TYPEC_DP_SID) + return -EINVAL; + + break; + } + + /* DP Altmode Setup */ + + regmap_write(nb7->regmap, AUX_CC_REG, reverse ? 0x1 : 0x0); + + switch (nb7->mode) { + case TYPEC_DP_STATE_C: + case TYPEC_DP_STATE_E: + /* + * Normal Orientation (CC1) + * A -> DP3 + * B -> DP2 + * C -> DP1 + * D -> DP0 + * Flipped Orientation (CC2) + * A -> DP0 + * B -> DP1 + * C -> DP2 + * D -> DP3 + */ + regmap_write(nb7->regmap, GEN_DEV_SET_REG, + GEN_DEV_SET_CHIP_EN | + GEN_DEV_SET_CHNA_EN | + GEN_DEV_SET_CHNB_EN | + GEN_DEV_SET_CHNC_EN | + GEN_DEV_SET_CHND_EN | + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK, + GEN_DEV_SET_OP_MODE_DP_4LANE)); + nb7vpq904m_set_channel(nb7, NB7_CHNA, true); + nb7vpq904m_set_channel(nb7, NB7_CHNB, true); + nb7vpq904m_set_channel(nb7, NB7_CHNC, true); + nb7vpq904m_set_channel(nb7, NB7_CHND, true); + break; + + case TYPEC_DP_STATE_D: + case TYPEC_DP_STATE_F: + regmap_write(nb7->regmap, GEN_DEV_SET_REG, + GEN_DEV_SET_CHIP_EN | + GEN_DEV_SET_CHNA_EN | + GEN_DEV_SET_CHNB_EN | + GEN_DEV_SET_CHNC_EN | + GEN_DEV_SET_CHND_EN | + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK, + reverse ^ nb7->swap_data_lanes ? + GEN_DEV_SET_OP_MODE_DP_CC2 + : GEN_DEV_SET_OP_MODE_DP_CC1)); + + /* + * Normal Orientation (CC1) + * A -> USB RX + * B -> USB TX + * C -> DP1 + * D -> DP0 + * Flipped Orientation (CC2) + * A -> DP0 + * B -> DP1 + * C -> USB TX + * D -> USB RX + * + * Reversed if data lanes are swapped + */ + if (nb7->swap_data_lanes) { + nb7vpq904m_set_channel(nb7, NB7_CHNA, !reverse); + nb7vpq904m_set_channel(nb7, NB7_CHNB, !reverse); + nb7vpq904m_set_channel(nb7, NB7_CHNC, reverse); + nb7vpq904m_set_channel(nb7, NB7_CHND, reverse); + } else { + nb7vpq904m_set_channel(nb7, NB7_CHNA, reverse); + nb7vpq904m_set_channel(nb7, NB7_CHNB, reverse); + nb7vpq904m_set_channel(nb7, NB7_CHNC, !reverse); + nb7vpq904m_set_channel(nb7, NB7_CHND, !reverse); + } + break; + + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int nb7vpq904m_sw_set(struct typec_switch_dev *sw, enum typec_orientation orientation) +{ + struct nb7vpq904m *nb7 = typec_switch_get_drvdata(sw); + int ret; + + ret = typec_switch_set(nb7->typec_switch, orientation); + if (ret) + return ret; + + mutex_lock(&nb7->lock); + + if (nb7->orientation != orientation) { + nb7->orientation = orientation; + + ret = nb7vpq904m_set(nb7); + } + + mutex_unlock(&nb7->lock); + + return ret; +} + +static int nb7vpq904m_retimer_set(struct typec_retimer *retimer, struct typec_retimer_state *state) +{ + struct nb7vpq904m *nb7 = typec_retimer_get_drvdata(retimer); + int ret = 0; + + mutex_lock(&nb7->lock); + + if (nb7->mode != state->mode) { + nb7->mode = state->mode; + + if (state->alt) + nb7->svid = state->alt->svid; + else + nb7->svid = 0; // No SVID + + ret = nb7vpq904m_set(nb7); + } + + mutex_unlock(&nb7->lock); + + return ret; +} + +#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DRM_PANEL_BRIDGE) +static int nb7vpq904m_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct nb7vpq904m *nb7 = container_of(bridge, struct nb7vpq904m, bridge); + struct drm_bridge *next_bridge; + + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) + return -EINVAL; + + next_bridge = devm_drm_of_get_bridge(&nb7->client->dev, nb7->client->dev.of_node, 0, 0); + if (IS_ERR(next_bridge)) { + dev_err(&nb7->client->dev, "failed to acquire drm_bridge: %pe\n", next_bridge); + return PTR_ERR(next_bridge); + } + + return drm_bridge_attach(bridge->encoder, next_bridge, bridge, + DRM_BRIDGE_ATTACH_NO_CONNECTOR); +} + +static const struct drm_bridge_funcs nb7vpq904m_bridge_funcs = { + .attach = nb7vpq904m_bridge_attach, +}; + +static int nb7vpq904m_register_bridge(struct nb7vpq904m *nb7) +{ + nb7->bridge.funcs = &nb7vpq904m_bridge_funcs; + nb7->bridge.of_node = nb7->client->dev.of_node; + + return devm_drm_bridge_add(&nb7->client->dev, &nb7->bridge); +} +#else +static int nb7vpq904m_register_bridge(struct nb7vpq904m *nb7) +{ + return 0; +} +#endif + +static const struct regmap_config nb7_regmap = { + .max_register = 0x1f, + .reg_bits = 8, + .val_bits = 8, +}; + +enum { + NORMAL_LANE_MAPPING, + INVERT_LANE_MAPPING, +}; + +#define DATA_LANES_COUNT 4 + +static const int supported_data_lane_mapping[][DATA_LANES_COUNT] = { + [NORMAL_LANE_MAPPING] = { 0, 1, 2, 3 }, + [INVERT_LANE_MAPPING] = { 3, 2, 1, 0 }, +}; + +static int nb7vpq904m_parse_data_lanes_mapping(struct nb7vpq904m *nb7) +{ + struct device_node *ep; + u32 data_lanes[4]; + int ret, i, j; + + ep = of_graph_get_endpoint_by_regs(nb7->client->dev.of_node, 1, 0); + + if (ep) { + ret = of_property_count_u32_elems(ep, "data-lanes"); + if (ret == -EINVAL) + /* Property isn't here, consider default mapping */ + goto out_done; + if (ret < 0) + goto out_error; + + if (ret != DATA_LANES_COUNT) { + dev_err(&nb7->client->dev, "expected 4 data lanes\n"); + ret = -EINVAL; + goto out_error; + } + + ret = of_property_read_u32_array(ep, "data-lanes", data_lanes, DATA_LANES_COUNT); + if (ret) + goto out_error; + + for (i = 0; i < ARRAY_SIZE(supported_data_lane_mapping); i++) { + for (j = 0; j < DATA_LANES_COUNT; j++) { + if (data_lanes[j] != supported_data_lane_mapping[i][j]) + break; + } + + if (j == DATA_LANES_COUNT) + break; + } + + switch (i) { + case NORMAL_LANE_MAPPING: + break; + case INVERT_LANE_MAPPING: + nb7->swap_data_lanes = true; + dev_info(&nb7->client->dev, "using inverted data lanes mapping\n"); + break; + default: + dev_err(&nb7->client->dev, "invalid data lanes mapping\n"); + ret = -EINVAL; + goto out_error; + } + } + +out_done: + ret = 0; + +out_error: + of_node_put(ep); + + return ret; +} + +static int nb7vpq904m_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct typec_switch_desc sw_desc = { }; + struct typec_retimer_desc retimer_desc = { }; + struct nb7vpq904m *nb7; + int ret; + + nb7 = devm_kzalloc(dev, sizeof(*nb7), GFP_KERNEL); + if (!nb7) + return -ENOMEM; + + nb7->client = client; + + nb7->regmap = devm_regmap_init_i2c(client, &nb7_regmap); + if (IS_ERR(nb7->regmap)) { + dev_err(&client->dev, "Failed to allocate register map\n"); + return PTR_ERR(nb7->regmap); + } + + nb7->mode = TYPEC_STATE_SAFE; + nb7->orientation = TYPEC_ORIENTATION_NONE; + + mutex_init(&nb7->lock); + + nb7->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(nb7->enable_gpio)) + return dev_err_probe(dev, PTR_ERR(nb7->enable_gpio), + "unable to acquire enable gpio\n"); + + nb7->vcc_supply = devm_regulator_get_optional(dev, "vcc"); + if (IS_ERR(nb7->vcc_supply)) + return PTR_ERR(nb7->vcc_supply); + + nb7->typec_switch = fwnode_typec_switch_get(dev->fwnode); + if (IS_ERR(nb7->typec_switch)) + return dev_err_probe(dev, PTR_ERR(nb7->typec_switch), + "failed to acquire orientation-switch\n"); + + ret = nb7vpq904m_parse_data_lanes_mapping(nb7); + if (ret) + return ret; + + ret = regulator_enable(nb7->vcc_supply); + if (ret) + dev_warn(dev, "Failed to enable vcc: %d\n", ret); + + gpiod_set_value(nb7->enable_gpio, 1); + + ret = nb7vpq904m_register_bridge(nb7); + if (ret) + goto err_disable_gpio; + + sw_desc.drvdata = nb7; + sw_desc.fwnode = dev->fwnode; + sw_desc.set = nb7vpq904m_sw_set; + + nb7->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(nb7->sw)) { + ret = dev_err_probe(dev, PTR_ERR(nb7->sw), + "Error registering typec switch\n"); + goto err_disable_gpio; + } + + retimer_desc.drvdata = nb7; + retimer_desc.fwnode = dev->fwnode; + retimer_desc.set = nb7vpq904m_retimer_set; + + nb7->retimer = typec_retimer_register(dev, &retimer_desc); + if (IS_ERR(nb7->retimer)) { + ret = dev_err_probe(dev, PTR_ERR(nb7->retimer), + "Error registering typec retimer\n"); + goto err_switch_unregister; + } + + return 0; + +err_switch_unregister: + typec_switch_unregister(nb7->sw); + +err_disable_gpio: + gpiod_set_value(nb7->enable_gpio, 0); + regulator_disable(nb7->vcc_supply); + + return ret; +} + +static void nb7vpq904m_remove(struct i2c_client *client) +{ + struct nb7vpq904m *nb7 = i2c_get_clientdata(client); + + typec_retimer_unregister(nb7->retimer); + typec_switch_unregister(nb7->sw); + + gpiod_set_value(nb7->enable_gpio, 0); + + regulator_disable(nb7->vcc_supply); +} + +static const struct i2c_device_id nb7vpq904m_table[] = { + { "nb7vpq904m" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, nb7vpq904m_table); + +static const struct of_device_id nb7vpq904m_of_table[] = { + { .compatible = "onnn,nb7vpq904m" }, + { } +}; +MODULE_DEVICE_TABLE(of, nb7vpq904m_of_table); + +static struct i2c_driver nb7vpq904m_driver = { + .driver = { + .name = "nb7vpq904m", + .of_match_table = nb7vpq904m_of_table, + }, + .probe = nb7vpq904m_probe, + .remove = nb7vpq904m_remove, + .id_table = nb7vpq904m_table, +}; + +module_i2c_driver(nb7vpq904m_driver); + +MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>"); +MODULE_DESCRIPTION("OnSemi NB7VPQ904M Type-C driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/mux/pi3usb30532.c b/drivers/usb/typec/mux/pi3usb30532.c new file mode 100644 index 0000000000..8eeec135dc --- /dev/null +++ b/drivers/usb/typec/mux/pi3usb30532.c @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Pericom PI3USB30532 Type-C cross switch / mux driver + * + * Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_mux.h> + +#define PI3USB30532_CONF 0x00 + +#define PI3USB30532_CONF_OPEN 0x00 +#define PI3USB30532_CONF_SWAP 0x01 +#define PI3USB30532_CONF_4LANE_DP 0x02 +#define PI3USB30532_CONF_USB3 0x04 +#define PI3USB30532_CONF_USB3_AND_2LANE_DP 0x06 + +struct pi3usb30532 { + struct i2c_client *client; + struct mutex lock; /* protects the cached conf register */ + struct typec_switch_dev *sw; + struct typec_mux_dev *mux; + u8 conf; +}; + +static int pi3usb30532_set_conf(struct pi3usb30532 *pi, u8 new_conf) +{ + int ret = 0; + + if (pi->conf == new_conf) + return 0; + + ret = i2c_smbus_write_byte_data(pi->client, PI3USB30532_CONF, new_conf); + if (ret) { + dev_err(&pi->client->dev, "Error writing conf: %d\n", ret); + return ret; + } + + pi->conf = new_conf; + return 0; +} + +static int pi3usb30532_sw_set(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + struct pi3usb30532 *pi = typec_switch_get_drvdata(sw); + u8 new_conf; + int ret; + + mutex_lock(&pi->lock); + new_conf = pi->conf; + + switch (orientation) { + case TYPEC_ORIENTATION_NONE: + new_conf = PI3USB30532_CONF_OPEN; + break; + case TYPEC_ORIENTATION_NORMAL: + new_conf &= ~PI3USB30532_CONF_SWAP; + break; + case TYPEC_ORIENTATION_REVERSE: + new_conf |= PI3USB30532_CONF_SWAP; + break; + } + + ret = pi3usb30532_set_conf(pi, new_conf); + mutex_unlock(&pi->lock); + + return ret; +} + +static int +pi3usb30532_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) +{ + struct pi3usb30532 *pi = typec_mux_get_drvdata(mux); + u8 new_conf; + int ret; + + mutex_lock(&pi->lock); + new_conf = pi->conf; + + switch (state->mode) { + case TYPEC_STATE_SAFE: + new_conf = (new_conf & PI3USB30532_CONF_SWAP) | + PI3USB30532_CONF_OPEN; + break; + case TYPEC_STATE_USB: + new_conf = (new_conf & PI3USB30532_CONF_SWAP) | + PI3USB30532_CONF_USB3; + break; + case TYPEC_DP_STATE_C: + case TYPEC_DP_STATE_E: + new_conf = (new_conf & PI3USB30532_CONF_SWAP) | + PI3USB30532_CONF_4LANE_DP; + break; + case TYPEC_DP_STATE_D: + new_conf = (new_conf & PI3USB30532_CONF_SWAP) | + PI3USB30532_CONF_USB3_AND_2LANE_DP; + break; + default: + break; + } + + ret = pi3usb30532_set_conf(pi, new_conf); + mutex_unlock(&pi->lock); + + return ret; +} + +static int pi3usb30532_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct typec_switch_desc sw_desc = { }; + struct typec_mux_desc mux_desc = { }; + struct pi3usb30532 *pi; + int ret; + + pi = devm_kzalloc(dev, sizeof(*pi), GFP_KERNEL); + if (!pi) + return -ENOMEM; + + pi->client = client; + mutex_init(&pi->lock); + + ret = i2c_smbus_read_byte_data(client, PI3USB30532_CONF); + if (ret < 0) { + dev_err(dev, "Error reading config register %d\n", ret); + return ret; + } + pi->conf = ret; + + sw_desc.drvdata = pi; + sw_desc.fwnode = dev->fwnode; + sw_desc.set = pi3usb30532_sw_set; + + pi->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(pi->sw)) { + dev_err(dev, "Error registering typec switch: %ld\n", + PTR_ERR(pi->sw)); + return PTR_ERR(pi->sw); + } + + mux_desc.drvdata = pi; + mux_desc.fwnode = dev->fwnode; + mux_desc.set = pi3usb30532_mux_set; + + pi->mux = typec_mux_register(dev, &mux_desc); + if (IS_ERR(pi->mux)) { + typec_switch_unregister(pi->sw); + dev_err(dev, "Error registering typec mux: %ld\n", + PTR_ERR(pi->mux)); + return PTR_ERR(pi->mux); + } + + i2c_set_clientdata(client, pi); + return 0; +} + +static void pi3usb30532_remove(struct i2c_client *client) +{ + struct pi3usb30532 *pi = i2c_get_clientdata(client); + + typec_mux_unregister(pi->mux); + typec_switch_unregister(pi->sw); +} + +static const struct i2c_device_id pi3usb30532_table[] = { + { "pi3usb30532" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pi3usb30532_table); + +static struct i2c_driver pi3usb30532_driver = { + .driver = { + .name = "pi3usb30532", + }, + .probe = pi3usb30532_probe, + .remove = pi3usb30532_remove, + .id_table = pi3usb30532_table, +}; + +module_i2c_driver(pi3usb30532_driver); + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_DESCRIPTION("Pericom PI3USB30532 Type-C mux driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/pd.c b/drivers/usb/typec/pd.c new file mode 100644 index 0000000000..8cc66e4467 --- /dev/null +++ b/drivers/usb/typec/pd.c @@ -0,0 +1,714 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB Power Delivery sysfs entries + * + * Copyright (C) 2022, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/slab.h> +#include <linux/usb/pd.h> + +#include "pd.h" + +static DEFINE_IDA(pd_ida); + +static struct class pd_class = { + .name = "usb_power_delivery", +}; + +#define to_pdo(o) container_of(o, struct pdo, dev) + +struct pdo { + struct device dev; + int object_position; + u32 pdo; +}; + +static void pdo_release(struct device *dev) +{ + kfree(to_pdo(dev)); +} + +/* -------------------------------------------------------------------------- */ +/* Fixed Supply */ + +static ssize_t +dual_role_power_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_DUAL_ROLE)); +} +static DEVICE_ATTR_RO(dual_role_power); + +static ssize_t +usb_suspend_supported_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_SUSPEND)); +} +static DEVICE_ATTR_RO(usb_suspend_supported); + +static ssize_t +higher_capability_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_HIGHER_CAP)); +} +static DEVICE_ATTR_RO(higher_capability); + +static ssize_t +unconstrained_power_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_EXTPOWER)); +} +static DEVICE_ATTR_RO(unconstrained_power); + +static ssize_t +usb_communication_capable_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_USB_COMM)); +} +static DEVICE_ATTR_RO(usb_communication_capable); + +static ssize_t +dual_role_data_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_DATA_SWAP)); +} +static DEVICE_ATTR_RO(dual_role_data); + +static ssize_t +unchunked_extended_messages_supported_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_UNCHUNK_EXT)); +} +static DEVICE_ATTR_RO(unchunked_extended_messages_supported); + +/* + * REVISIT: Peak Current requires access also to the RDO. +static ssize_t +peak_current_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + ... +} +*/ + +static ssize_t +fast_role_swap_current_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%u\n", (to_pdo(dev)->pdo >> PDO_FIXED_FRS_CURR_SHIFT) & 3); +} +static DEVICE_ATTR_RO(fast_role_swap_current); + +static ssize_t voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%umV\n", pdo_fixed_voltage(to_pdo(dev)->pdo)); +} +static DEVICE_ATTR_RO(voltage); + +/* Shared with Variable supplies, both source and sink */ +static ssize_t current_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%umA\n", pdo_max_current(to_pdo(dev)->pdo)); +} + +/* Shared with Variable type supplies */ +static struct device_attribute maximum_current_attr = { + .attr = { + .name = "maximum_current", + .mode = 0444, + }, + .show = current_show, +}; + +static struct device_attribute operational_current_attr = { + .attr = { + .name = "operational_current", + .mode = 0444, + }, + .show = current_show, +}; + +static struct attribute *source_fixed_supply_attrs[] = { + &dev_attr_dual_role_power.attr, + &dev_attr_usb_suspend_supported.attr, + &dev_attr_unconstrained_power.attr, + &dev_attr_usb_communication_capable.attr, + &dev_attr_dual_role_data.attr, + &dev_attr_unchunked_extended_messages_supported.attr, + /*&dev_attr_peak_current.attr,*/ + &dev_attr_voltage.attr, + &maximum_current_attr.attr, + NULL +}; + +static umode_t fixed_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) +{ + if (to_pdo(kobj_to_dev(kobj))->object_position && + /*attr != &dev_attr_peak_current.attr &&*/ + attr != &dev_attr_voltage.attr && + attr != &maximum_current_attr.attr && + attr != &operational_current_attr.attr) + return 0; + + return attr->mode; +} + +static const struct attribute_group source_fixed_supply_group = { + .is_visible = fixed_attr_is_visible, + .attrs = source_fixed_supply_attrs, +}; +__ATTRIBUTE_GROUPS(source_fixed_supply); + +static struct device_type source_fixed_supply_type = { + .name = "pdo", + .release = pdo_release, + .groups = source_fixed_supply_groups, +}; + +static struct attribute *sink_fixed_supply_attrs[] = { + &dev_attr_dual_role_power.attr, + &dev_attr_higher_capability.attr, + &dev_attr_unconstrained_power.attr, + &dev_attr_usb_communication_capable.attr, + &dev_attr_dual_role_data.attr, + &dev_attr_unchunked_extended_messages_supported.attr, + &dev_attr_fast_role_swap_current.attr, + &dev_attr_voltage.attr, + &operational_current_attr.attr, + NULL +}; + +static const struct attribute_group sink_fixed_supply_group = { + .is_visible = fixed_attr_is_visible, + .attrs = sink_fixed_supply_attrs, +}; +__ATTRIBUTE_GROUPS(sink_fixed_supply); + +static struct device_type sink_fixed_supply_type = { + .name = "pdo", + .release = pdo_release, + .groups = sink_fixed_supply_groups, +}; + +/* -------------------------------------------------------------------------- */ +/* Variable Supply */ + +static ssize_t +maximum_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%umV\n", pdo_max_voltage(to_pdo(dev)->pdo)); +} +static DEVICE_ATTR_RO(maximum_voltage); + +static ssize_t +minimum_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%umV\n", pdo_min_voltage(to_pdo(dev)->pdo)); +} +static DEVICE_ATTR_RO(minimum_voltage); + +static struct attribute *source_variable_supply_attrs[] = { + &dev_attr_maximum_voltage.attr, + &dev_attr_minimum_voltage.attr, + &maximum_current_attr.attr, + NULL +}; +ATTRIBUTE_GROUPS(source_variable_supply); + +static struct device_type source_variable_supply_type = { + .name = "pdo", + .release = pdo_release, + .groups = source_variable_supply_groups, +}; + +static struct attribute *sink_variable_supply_attrs[] = { + &dev_attr_maximum_voltage.attr, + &dev_attr_minimum_voltage.attr, + &operational_current_attr.attr, + NULL +}; +ATTRIBUTE_GROUPS(sink_variable_supply); + +static struct device_type sink_variable_supply_type = { + .name = "pdo", + .release = pdo_release, + .groups = sink_variable_supply_groups, +}; + +/* -------------------------------------------------------------------------- */ +/* Battery */ + +static ssize_t +maximum_power_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%umW\n", pdo_max_power(to_pdo(dev)->pdo)); +} +static DEVICE_ATTR_RO(maximum_power); + +static ssize_t +operational_power_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%umW\n", pdo_max_power(to_pdo(dev)->pdo)); +} +static DEVICE_ATTR_RO(operational_power); + +static struct attribute *source_battery_attrs[] = { + &dev_attr_maximum_voltage.attr, + &dev_attr_minimum_voltage.attr, + &dev_attr_maximum_power.attr, + NULL +}; +ATTRIBUTE_GROUPS(source_battery); + +static struct device_type source_battery_type = { + .name = "pdo", + .release = pdo_release, + .groups = source_battery_groups, +}; + +static struct attribute *sink_battery_attrs[] = { + &dev_attr_maximum_voltage.attr, + &dev_attr_minimum_voltage.attr, + &dev_attr_operational_power.attr, + NULL +}; +ATTRIBUTE_GROUPS(sink_battery); + +static struct device_type sink_battery_type = { + .name = "pdo", + .release = pdo_release, + .groups = sink_battery_groups, +}; + +/* -------------------------------------------------------------------------- */ +/* Standard Power Range (SPR) Programmable Power Supply (PPS) */ + +static ssize_t +pps_power_limited_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & BIT(27))); +} +static DEVICE_ATTR_RO(pps_power_limited); + +static ssize_t +pps_max_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%umV\n", pdo_pps_apdo_max_voltage(to_pdo(dev)->pdo)); +} + +static ssize_t +pps_min_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%umV\n", pdo_pps_apdo_min_voltage(to_pdo(dev)->pdo)); +} + +static ssize_t +pps_max_current_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%umA\n", pdo_pps_apdo_max_current(to_pdo(dev)->pdo)); +} + +static struct device_attribute pps_max_voltage_attr = { + .attr = { + .name = "maximum_voltage", + .mode = 0444, + }, + .show = pps_max_voltage_show, +}; + +static struct device_attribute pps_min_voltage_attr = { + .attr = { + .name = "minimum_voltage", + .mode = 0444, + }, + .show = pps_min_voltage_show, +}; + +static struct device_attribute pps_max_current_attr = { + .attr = { + .name = "maximum_current", + .mode = 0444, + }, + .show = pps_max_current_show, +}; + +static struct attribute *source_pps_attrs[] = { + &dev_attr_pps_power_limited.attr, + &pps_max_voltage_attr.attr, + &pps_min_voltage_attr.attr, + &pps_max_current_attr.attr, + NULL +}; +ATTRIBUTE_GROUPS(source_pps); + +static struct device_type source_pps_type = { + .name = "pdo", + .release = pdo_release, + .groups = source_pps_groups, +}; + +static struct attribute *sink_pps_attrs[] = { + &pps_max_voltage_attr.attr, + &pps_min_voltage_attr.attr, + &pps_max_current_attr.attr, + NULL +}; +ATTRIBUTE_GROUPS(sink_pps); + +static struct device_type sink_pps_type = { + .name = "pdo", + .release = pdo_release, + .groups = sink_pps_groups, +}; + +/* -------------------------------------------------------------------------- */ + +static const char * const supply_name[] = { + [PDO_TYPE_FIXED] = "fixed_supply", + [PDO_TYPE_BATT] = "battery", + [PDO_TYPE_VAR] = "variable_supply", +}; + +static const char * const apdo_supply_name[] = { + [APDO_TYPE_PPS] = "programmable_supply", +}; + +static struct device_type *source_type[] = { + [PDO_TYPE_FIXED] = &source_fixed_supply_type, + [PDO_TYPE_BATT] = &source_battery_type, + [PDO_TYPE_VAR] = &source_variable_supply_type, +}; + +static struct device_type *source_apdo_type[] = { + [APDO_TYPE_PPS] = &source_pps_type, +}; + +static struct device_type *sink_type[] = { + [PDO_TYPE_FIXED] = &sink_fixed_supply_type, + [PDO_TYPE_BATT] = &sink_battery_type, + [PDO_TYPE_VAR] = &sink_variable_supply_type, +}; + +static struct device_type *sink_apdo_type[] = { + [APDO_TYPE_PPS] = &sink_pps_type, +}; + +/* REVISIT: Export when EPR_*_Capabilities need to be supported. */ +static int add_pdo(struct usb_power_delivery_capabilities *cap, u32 pdo, int position) +{ + struct device_type *type; + const char *name; + struct pdo *p; + int ret; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + if (!p) + return -ENOMEM; + + p->pdo = pdo; + p->object_position = position; + + if (pdo_type(pdo) == PDO_TYPE_APDO) { + /* FIXME: Only PPS supported for now! Skipping others. */ + if (pdo_apdo_type(pdo) > APDO_TYPE_PPS) { + dev_warn(&cap->dev, "Unknown APDO type. PDO 0x%08x\n", pdo); + kfree(p); + return 0; + } + + if (is_source(cap->role)) + type = source_apdo_type[pdo_apdo_type(pdo)]; + else + type = sink_apdo_type[pdo_apdo_type(pdo)]; + + name = apdo_supply_name[pdo_apdo_type(pdo)]; + } else { + if (is_source(cap->role)) + type = source_type[pdo_type(pdo)]; + else + type = sink_type[pdo_type(pdo)]; + + name = supply_name[pdo_type(pdo)]; + } + + p->dev.parent = &cap->dev; + p->dev.type = type; + dev_set_name(&p->dev, "%u:%s", position + 1, name); + + ret = device_register(&p->dev); + if (ret) { + put_device(&p->dev); + return ret; + } + + return 0; +} + +static int remove_pdo(struct device *dev, void *data) +{ + device_unregister(dev); + return 0; +} + +/* -------------------------------------------------------------------------- */ + +static const char * const cap_name[] = { + [TYPEC_SINK] = "sink-capabilities", + [TYPEC_SOURCE] = "source-capabilities", +}; + +static void pd_capabilities_release(struct device *dev) +{ + kfree(to_usb_power_delivery_capabilities(dev)); +} + +static struct device_type pd_capabilities_type = { + .name = "capabilities", + .release = pd_capabilities_release, +}; + +/** + * usb_power_delivery_register_capabilities - Register a set of capabilities. + * @pd: The USB PD instance that the capabilities belong to. + * @desc: Description of the Capablities Message. + * + * This function registers a Capabilities Message described in @desc. The + * capabilities will have their own sub-directory under @pd in sysfs. + * + * The function returns pointer to struct usb_power_delivery_capabilities, or + * ERR_PRT(errno). + */ +struct usb_power_delivery_capabilities * +usb_power_delivery_register_capabilities(struct usb_power_delivery *pd, + struct usb_power_delivery_capabilities_desc *desc) +{ + struct usb_power_delivery_capabilities *cap; + int ret; + int i; + + cap = kzalloc(sizeof(*cap), GFP_KERNEL); + if (!cap) + return ERR_PTR(-ENOMEM); + + cap->pd = pd; + cap->role = desc->role; + + cap->dev.parent = &pd->dev; + cap->dev.type = &pd_capabilities_type; + dev_set_name(&cap->dev, "%s", cap_name[cap->role]); + + ret = device_register(&cap->dev); + if (ret) { + put_device(&cap->dev); + return ERR_PTR(ret); + } + + for (i = 0; i < PDO_MAX_OBJECTS && desc->pdo[i]; i++) { + ret = add_pdo(cap, desc->pdo[i], i); + if (ret) { + usb_power_delivery_unregister_capabilities(cap); + return ERR_PTR(ret); + } + } + + return cap; +} +EXPORT_SYMBOL_GPL(usb_power_delivery_register_capabilities); + +/** + * usb_power_delivery_unregister_capabilities - Unregister a set of capabilities + * @cap: The capabilities + */ +void usb_power_delivery_unregister_capabilities(struct usb_power_delivery_capabilities *cap) +{ + if (!cap) + return; + + device_for_each_child(&cap->dev, NULL, remove_pdo); + device_unregister(&cap->dev); +} +EXPORT_SYMBOL_GPL(usb_power_delivery_unregister_capabilities); + +/* -------------------------------------------------------------------------- */ + +static ssize_t revision_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_power_delivery *pd = to_usb_power_delivery(dev); + + return sysfs_emit(buf, "%u.%u\n", (pd->revision >> 8) & 0xff, (pd->revision >> 4) & 0xf); +} +static DEVICE_ATTR_RO(revision); + +static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_power_delivery *pd = to_usb_power_delivery(dev); + + return sysfs_emit(buf, "%u.%u\n", (pd->version >> 8) & 0xff, (pd->version >> 4) & 0xf); +} +static DEVICE_ATTR_RO(version); + +static struct attribute *pd_attrs[] = { + &dev_attr_revision.attr, + &dev_attr_version.attr, + NULL +}; + +static umode_t pd_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) +{ + struct usb_power_delivery *pd = to_usb_power_delivery(kobj_to_dev(kobj)); + + if (attr == &dev_attr_version.attr && !pd->version) + return 0; + + return attr->mode; +} + +static const struct attribute_group pd_group = { + .is_visible = pd_attr_is_visible, + .attrs = pd_attrs, +}; +__ATTRIBUTE_GROUPS(pd); + +static void pd_release(struct device *dev) +{ + struct usb_power_delivery *pd = to_usb_power_delivery(dev); + + ida_simple_remove(&pd_ida, pd->id); + kfree(pd); +} + +static struct device_type pd_type = { + .name = "usb_power_delivery", + .release = pd_release, + .groups = pd_groups, +}; + +struct usb_power_delivery *usb_power_delivery_find(const char *name) +{ + struct device *dev; + + dev = class_find_device_by_name(&pd_class, name); + + return dev ? to_usb_power_delivery(dev) : NULL; +} + +/** + * usb_power_delivery_register - Register USB Power Delivery Support. + * @parent: Parent device. + * @desc: Description of the USB PD contract. + * + * This routine can be used to register USB Power Delivery capabilities that a + * device or devices can support. These capabilities represent all the + * capabilities that can be negotiated with a partner, so not only the Power + * Capabilities that are negotiated using the USB PD Capabilities Message. + * + * The USB Power Delivery Support object that this routine generates can be used + * as the parent object for all the actual USB Power Delivery Messages and + * objects that can be negotiated with the partner. + * + * Returns handle to struct usb_power_delivery or ERR_PTR. + */ +struct usb_power_delivery * +usb_power_delivery_register(struct device *parent, struct usb_power_delivery_desc *desc) +{ + struct usb_power_delivery *pd; + int ret; + + pd = kzalloc(sizeof(*pd), GFP_KERNEL); + if (!pd) + return ERR_PTR(-ENOMEM); + + ret = ida_simple_get(&pd_ida, 0, 0, GFP_KERNEL); + if (ret < 0) { + kfree(pd); + return ERR_PTR(ret); + } + + pd->id = ret; + pd->revision = desc->revision; + pd->version = desc->version; + + pd->dev.parent = parent; + pd->dev.type = &pd_type; + pd->dev.class = &pd_class; + dev_set_name(&pd->dev, "pd%d", pd->id); + + ret = device_register(&pd->dev); + if (ret) { + put_device(&pd->dev); + return ERR_PTR(ret); + } + + return pd; +} +EXPORT_SYMBOL_GPL(usb_power_delivery_register); + +/** + * usb_power_delivery_unregister - Unregister USB Power Delivery Support. + * @pd: The USB PD contract. + */ +void usb_power_delivery_unregister(struct usb_power_delivery *pd) +{ + if (IS_ERR_OR_NULL(pd)) + return; + + device_unregister(&pd->dev); +} +EXPORT_SYMBOL_GPL(usb_power_delivery_unregister); + +/** + * usb_power_delivery_link_device - Link device to its USB PD object. + * @pd: The USB PD instance. + * @dev: The device. + * + * This function can be used to create a symlink named "usb_power_delivery" for + * @dev that points to @pd. + */ +int usb_power_delivery_link_device(struct usb_power_delivery *pd, struct device *dev) +{ + int ret; + + if (IS_ERR_OR_NULL(pd) || !dev) + return 0; + + ret = sysfs_create_link(&dev->kobj, &pd->dev.kobj, "usb_power_delivery"); + if (ret) + return ret; + + get_device(&pd->dev); + get_device(dev); + + return 0; +} +EXPORT_SYMBOL_GPL(usb_power_delivery_link_device); + +/** + * usb_power_delivery_unlink_device - Unlink device from its USB PD object. + * @pd: The USB PD instance. + * @dev: The device. + * + * Remove the symlink that was previously created with pd_link_device(). + */ +void usb_power_delivery_unlink_device(struct usb_power_delivery *pd, struct device *dev) +{ + if (IS_ERR_OR_NULL(pd) || !dev) + return; + + sysfs_remove_link(&dev->kobj, "usb_power_delivery"); + put_device(&pd->dev); + put_device(dev); +} +EXPORT_SYMBOL_GPL(usb_power_delivery_unlink_device); + +/* -------------------------------------------------------------------------- */ + +int __init usb_power_delivery_init(void) +{ + return class_register(&pd_class); +} + +void __exit usb_power_delivery_exit(void) +{ + ida_destroy(&pd_ida); + class_unregister(&pd_class); +} diff --git a/drivers/usb/typec/pd.h b/drivers/usb/typec/pd.h new file mode 100644 index 0000000000..049a1aad44 --- /dev/null +++ b/drivers/usb/typec/pd.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __USB_POWER_DELIVERY__ +#define __USB_POWER_DELIVERY__ + +#include <linux/device.h> +#include <linux/usb/typec.h> + +struct usb_power_delivery { + struct device dev; + int id; + u16 revision; + u16 version; +}; + +struct usb_power_delivery_capabilities { + struct device dev; + struct usb_power_delivery *pd; + enum typec_role role; +}; + +#define to_usb_power_delivery_capabilities(o) container_of(o, struct usb_power_delivery_capabilities, dev) +#define to_usb_power_delivery(o) container_of(o, struct usb_power_delivery, dev) + +struct usb_power_delivery *usb_power_delivery_find(const char *name); + +int usb_power_delivery_init(void); +void usb_power_delivery_exit(void); + +#endif /* __USB_POWER_DELIVERY__ */ diff --git a/drivers/usb/typec/port-mapper.c b/drivers/usb/typec/port-mapper.c new file mode 100644 index 0000000000..a929e000d0 --- /dev/null +++ b/drivers/usb/typec/port-mapper.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB Type-C Connector Class Port Mapping Utility + * + * Copyright (C) 2021, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/acpi.h> +#include <linux/component.h> + +#include "class.h" + +static int typec_aggregate_bind(struct device *dev) +{ + return component_bind_all(dev, NULL); +} + +static void typec_aggregate_unbind(struct device *dev) +{ + component_unbind_all(dev, NULL); +} + +static const struct component_master_ops typec_aggregate_ops = { + .bind = typec_aggregate_bind, + .unbind = typec_aggregate_unbind, +}; + +struct each_port_arg { + struct typec_port *port; + struct component_match *match; +}; + +static int typec_port_compare(struct device *dev, void *fwnode) +{ + return device_match_fwnode(dev, fwnode); +} + +static int typec_port_match(struct device *dev, void *data) +{ + struct acpi_device *adev = to_acpi_device(dev); + struct each_port_arg *arg = data; + struct acpi_device *con_adev; + + con_adev = ACPI_COMPANION(&arg->port->dev); + if (con_adev == adev) + return 0; + + if (con_adev->pld_crc == adev->pld_crc) + component_match_add(&arg->port->dev, &arg->match, typec_port_compare, + acpi_fwnode_handle(adev)); + return 0; +} + +int typec_link_ports(struct typec_port *con) +{ + struct each_port_arg arg = { .port = con, .match = NULL }; + + if (!has_acpi_companion(&con->dev)) + return 0; + + acpi_bus_for_each_dev(typec_port_match, &arg); + if (!arg.match) + return 0; + + /* + * REVISIT: Now each connector can have only a single component master. + * So far only the USB ports connected to the USB Type-C connector share + * the _PLD with it, but if there one day is something else (like maybe + * the DisplayPort ACPI device object) that also shares the _PLD with + * the connector, every one of those needs to have its own component + * master, because each different type of component needs to be bind to + * the connector independently of the other components. That requires + * improvements to the component framework. Right now you can only have + * one master per device. + */ + return component_master_add_with_match(&con->dev, &typec_aggregate_ops, arg.match); +} + +void typec_unlink_ports(struct typec_port *con) +{ + if (has_acpi_companion(&con->dev)) + component_master_del(&con->dev, &typec_aggregate_ops); +} diff --git a/drivers/usb/typec/retimer.c b/drivers/usb/typec/retimer.c new file mode 100644 index 0000000000..4a7d1b5c4d --- /dev/null +++ b/drivers/usb/typec/retimer.c @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2022 Google LLC + * + * USB Type-C Retimer support. + * Author: Prashant Malani <pmalani@chromium.org> + * + */ + +#include <linux/device.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/property.h> +#include <linux/slab.h> + +#include "class.h" +#include "retimer.h" + +static int retimer_fwnode_match(struct device *dev, const void *fwnode) +{ + return is_typec_retimer(dev) && device_match_fwnode(dev, fwnode); +} + +static void *typec_retimer_match(const struct fwnode_handle *fwnode, const char *id, void *data) +{ + struct device *dev; + + if (id && !fwnode_property_present(fwnode, id)) + return NULL; + + dev = class_find_device(&retimer_class, NULL, fwnode, + retimer_fwnode_match); + + return dev ? to_typec_retimer(dev) : ERR_PTR(-EPROBE_DEFER); +} + +/** + * fwnode_typec_retimer_get - Find USB Type-C retimer. + * @fwnode: The caller device node. + * + * Finds a retimer linked to the caller. This function is primarily meant for the + * Type-C drivers. Returns a reference to the retimer on success, NULL if no + * matching connection was found, or ERR_PTR(-EPROBE_DEFER) when a connection + * was found but the retimer has not been enumerated yet. + */ +struct typec_retimer *fwnode_typec_retimer_get(struct fwnode_handle *fwnode) +{ + struct typec_retimer *retimer; + + retimer = fwnode_connection_find_match(fwnode, "retimer-switch", NULL, typec_retimer_match); + if (!IS_ERR_OR_NULL(retimer)) + WARN_ON(!try_module_get(retimer->dev.parent->driver->owner)); + + return retimer; +} +EXPORT_SYMBOL_GPL(fwnode_typec_retimer_get); + +/** + * typec_retimer_put - Release handle to a retimer. + * @retimer: USB Type-C Connector Retimer. + * + * Decrements reference count for @retimer. + */ +void typec_retimer_put(struct typec_retimer *retimer) +{ + if (!IS_ERR_OR_NULL(retimer)) { + module_put(retimer->dev.parent->driver->owner); + put_device(&retimer->dev); + } +} +EXPORT_SYMBOL_GPL(typec_retimer_put); + +int typec_retimer_set(struct typec_retimer *retimer, struct typec_retimer_state *state) +{ + if (IS_ERR_OR_NULL(retimer)) + return 0; + + return retimer->set(retimer, state); +} +EXPORT_SYMBOL_GPL(typec_retimer_set); + +static void typec_retimer_release(struct device *dev) +{ + kfree(to_typec_retimer(dev)); +} + +const struct device_type typec_retimer_dev_type = { + .name = "typec_retimer", + .release = typec_retimer_release, +}; + +/** + * typec_retimer_register - Register a retimer device. + * @parent: Parent device. + * @desc: Retimer description. + * + * Some USB Type-C connectors have their physical lines routed through retimers before they + * reach muxes or host controllers. In some cases (for example: using alternate modes) + * these retimers need to be reconfigured appropriately. This function registers retimer + * switches which route and potentially modify the signals on the Type C physical lines + * enroute to the host controllers. + */ +struct typec_retimer * +typec_retimer_register(struct device *parent, const struct typec_retimer_desc *desc) +{ + struct typec_retimer *retimer; + int ret; + + if (!desc || !desc->set) + return ERR_PTR(-EINVAL); + + retimer = kzalloc(sizeof(*retimer), GFP_KERNEL); + if (!retimer) + return ERR_PTR(-ENOMEM); + + retimer->set = desc->set; + + device_initialize(&retimer->dev); + retimer->dev.parent = parent; + retimer->dev.fwnode = desc->fwnode; + retimer->dev.class = &retimer_class; + retimer->dev.type = &typec_retimer_dev_type; + retimer->dev.driver_data = desc->drvdata; + dev_set_name(&retimer->dev, "%s-retimer", + desc->name ? desc->name : dev_name(parent)); + + ret = device_add(&retimer->dev); + if (ret) { + dev_err(parent, "failed to register retimer (%d)\n", ret); + put_device(&retimer->dev); + return ERR_PTR(ret); + } + + return retimer; +} +EXPORT_SYMBOL_GPL(typec_retimer_register); + +/** + * typec_retimer_unregister - Unregister retimer device. + * @retimer: USB Type-C Connector retimer. + * + * Unregister retimer that was registered with typec_retimer_register(). + */ +void typec_retimer_unregister(struct typec_retimer *retimer) +{ + if (!IS_ERR_OR_NULL(retimer)) + device_unregister(&retimer->dev); +} +EXPORT_SYMBOL_GPL(typec_retimer_unregister); + +void *typec_retimer_get_drvdata(struct typec_retimer *retimer) +{ + return dev_get_drvdata(&retimer->dev); +} +EXPORT_SYMBOL_GPL(typec_retimer_get_drvdata); + +struct class retimer_class = { + .name = "retimer", +}; diff --git a/drivers/usb/typec/retimer.h b/drivers/usb/typec/retimer.h new file mode 100644 index 0000000000..d6a5ef9881 --- /dev/null +++ b/drivers/usb/typec/retimer.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __USB_TYPEC_RETIMER__ +#define __USB_TYPEC_RETIMER__ + +#include <linux/usb/typec_retimer.h> + +struct typec_retimer { + struct device dev; + typec_retimer_set_fn_t set; +}; + +#define to_typec_retimer(_dev_) container_of(_dev_, struct typec_retimer, dev) + +extern const struct device_type typec_retimer_dev_type; + +#define is_typec_retimer(dev) ((dev)->type == &typec_retimer_dev_type) + +#endif /* __USB_TYPEC_RETIMER__ */ diff --git a/drivers/usb/typec/rt1719.c b/drivers/usb/typec/rt1719.c new file mode 100644 index 0000000000..be02d42092 --- /dev/null +++ b/drivers/usb/typec/rt1719.c @@ -0,0 +1,959 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/bitfield.h> +#include <linux/completion.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/usb/pd.h> +#include <linux/usb/role.h> +#include <linux/usb/typec.h> + +#define RT1719_REG_TXCTRL1 0x03 +#define RT1719_REG_TXCTRL2 0x04 +#define RT1719_REG_POLICYINFO 0x0E +#define RT1719_REG_SRCPDO1 0x11 +#define RT1719_REG_MASKS 0x2D +#define RT1719_REG_EVENTS 0x33 +#define RT1719_REG_STATS 0x37 +#define RT1719_REG_PSELINFO 0x3C +#define RT1719_REG_USBSETINFO 0x3E +#define RT1719_REG_VENID 0x82 + +#define RT1719_UNIQUE_PID 0x1719 +#define RT1719_REQDRSWAP_MASK BIT(7) +#define RT1719_EVALMODE_MASK BIT(4) +#define RT1719_REQSRCPDO_MASK GENMASK(2, 0) +#define RT1719_TXSPDOREQ_MASK BIT(7) +#define RT1719_INT_DRSW_ACCEPT BIT(23) +#define RT1719_INT_RX_SRCCAP BIT(21) +#define RT1719_INT_VBUS_DCT BIT(6) +#define RT1719_INT_VBUS_PRESENT BIT(5) +#define RT1719_INT_PE_SNK_RDY BIT(2) +#define RT1719_CC1_STAT GENMASK(9, 8) +#define RT1719_CC2_STAT GENMASK(11, 10) +#define RT1719_POLARITY_MASK BIT(23) +#define RT1719_DATAROLE_MASK BIT(22) +#define RT1719_PDSPECREV_MASK GENMASK(21, 20) +#define RT1719_SPDOSEL_MASK GENMASK(18, 16) +#define RT1719_SPDONUM_MASK GENMASK(15, 13) +#define RT1719_ATTACH_VBUS BIT(12) +#define RT1719_ATTACH_DBG BIT(10) +#define RT1719_ATTACH_SNK BIT(9) +#define RT1719_ATTACHDEV_MASK (RT1719_ATTACH_VBUS | RT1719_ATTACH_DBG | \ + RT1719_ATTACH_SNK) +#define RT1719_PE_EXP_CONTRACT BIT(2) +#define RT1719_PSEL_SUPPORT BIT(15) +#define RT1719_TBLSEL_MASK BIT(6) +#define RT1719_LATPSEL_MASK GENMASK(5, 0) +#define RT1719_USBINFO_MASK GENMASK(1, 0) +#define RT1719_USB_DFPUFP 3 +#define RT1719_MAX_SRCPDO 7 + +enum { + SNK_PWR_OPEN = 0, + SNK_PWR_DEF, + SNK_PWR_1P5A, + SNK_PWR_3A +}; + +enum { + USBPD_SPECREV_1_0 = 0, + USBPD_SPECREV_2_0, + USBPD_SPECREV_3_0 +}; + +enum rt1719_snkcap { + RT1719_SNKCAP_5V = 0, + RT1719_SNKCAP_9V, + RT1719_SNKCAP_12V, + RT1719_SNKCAP_15V, + RT1719_SNKCAP_20V, + RT1719_MAX_SNKCAP +}; + +struct rt1719_psel_cap { + u8 lomask; + u8 himask; + u32 milliwatt; + u32 milliamp; +}; + +struct rt1719_data { + struct device *dev; + struct regmap *regmap; + struct typec_port *port; + struct usb_role_switch *role_sw; + struct power_supply *psy; + struct typec_partner *partner; + struct power_supply_desc psy_desc; + struct usb_pd_identity partner_ident; + struct typec_partner_desc partner_desc; + struct completion req_completion; + enum power_supply_usb_type usb_type; + bool attached; + bool pd_capable; + bool drswap_support; + u32 voltage; + u32 req_voltage; + u32 max_current; + u32 op_current; + u32 spdos[RT1719_MAX_SRCPDO]; + u16 snkcaps[RT1719_MAX_SNKCAP]; + int spdo_num; + int spdo_sel; + u32 conn_info; + u16 conn_stat; +}; + +static const enum power_supply_usb_type rt1719_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_C, + POWER_SUPPLY_USB_TYPE_PD, + POWER_SUPPLY_USB_TYPE_PD_PPS +}; + +static const enum power_supply_property rt1719_psy_properties[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW +}; + +static int rt1719_read16(struct rt1719_data *data, unsigned int reg, u16 *val) +{ + __le16 regval; + int ret; + + ret = regmap_raw_read(data->regmap, reg, ®val, sizeof(regval)); + if (ret) + return ret; + + *val = le16_to_cpu(regval); + return 0; +} + +static int rt1719_read32(struct rt1719_data *data, unsigned int reg, u32 *val) +{ + __le32 regval; + int ret; + + ret = regmap_raw_read(data->regmap, reg, ®val, sizeof(regval)); + if (ret) + return ret; + + *val = le32_to_cpu(regval); + return 0; +} + +static int rt1719_write32(struct rt1719_data *data, unsigned int reg, u32 val) +{ + __le32 regval = cpu_to_le32(val); + + return regmap_raw_write(data->regmap, reg, ®val, sizeof(regval)); +} + +static enum typec_pwr_opmode rt1719_get_pwr_opmode(u32 conn, u16 stat) +{ + u16 cc1, cc2, cc_stat; + + cc1 = FIELD_GET(RT1719_CC1_STAT, stat); + cc2 = FIELD_GET(RT1719_CC2_STAT, stat); + + if (conn & RT1719_ATTACH_SNK) { + if (conn & RT1719_POLARITY_MASK) + cc_stat = cc2; + else + cc_stat = cc1; + + switch (cc_stat) { + case SNK_PWR_3A: + return TYPEC_PWR_MODE_3_0A; + case SNK_PWR_1P5A: + return TYPEC_PWR_MODE_1_5A; + } + } else if (conn & RT1719_ATTACH_DBG) { + if ((cc1 == SNK_PWR_1P5A && cc2 == SNK_PWR_DEF) || + (cc1 == SNK_PWR_DEF && cc2 == SNK_PWR_1P5A)) + return TYPEC_PWR_MODE_1_5A; + else if ((cc1 == SNK_PWR_3A && cc2 == SNK_PWR_DEF) || + (cc1 == SNK_PWR_DEF && cc2 == SNK_PWR_3A)) + return TYPEC_PWR_MODE_3_0A; + } + + return TYPEC_PWR_MODE_USB; +} + +static enum typec_data_role rt1719_get_data_role(u32 conn) +{ + if (conn & RT1719_DATAROLE_MASK) + return TYPEC_HOST; + return TYPEC_DEVICE; +} + +static void rt1719_set_data_role(struct rt1719_data *data, + enum typec_data_role data_role, + bool attached) +{ + enum usb_role usb_role = USB_ROLE_NONE; + + if (attached) { + if (data_role == TYPEC_HOST) + usb_role = USB_ROLE_HOST; + else + usb_role = USB_ROLE_DEVICE; + } + + usb_role_switch_set_role(data->role_sw, usb_role); + typec_set_data_role(data->port, data_role); +} + +static void rt1719_update_data_role(struct rt1719_data *data) +{ + if (!data->attached) + return; + + rt1719_set_data_role(data, rt1719_get_data_role(data->conn_info), true); +} + +static void rt1719_register_partner(struct rt1719_data *data) +{ + u16 spec_rev = 0; + + if (data->pd_capable) { + u32 rev; + + rev = FIELD_GET(RT1719_PDSPECREV_MASK, data->conn_info); + switch (rev) { + case USBPD_SPECREV_3_0: + spec_rev = 0x0300; + break; + case USBPD_SPECREV_2_0: + spec_rev = 0x0200; + break; + default: + spec_rev = 0x0100; + break; + } + } + + /* Just to prevent multiple times attach */ + if (data->partner) + typec_unregister_partner(data->partner); + + memset(&data->partner_ident, 0, sizeof(data->partner_ident)); + data->partner_desc.usb_pd = data->pd_capable; + data->partner_desc.pd_revision = spec_rev; + + if (data->conn_info & RT1719_ATTACH_DBG) + data->partner_desc.accessory = TYPEC_ACCESSORY_DEBUG; + else + data->partner_desc.accessory = TYPEC_ACCESSORY_NONE; + + data->partner = typec_register_partner(data->port, &data->partner_desc); +} + +static void rt1719_attach(struct rt1719_data *data) +{ + enum typec_pwr_opmode pwr_opmode; + enum typec_data_role data_role; + u32 volt = 5000, curr = 500; + + if (!(data->conn_info & RT1719_ATTACHDEV_MASK)) + return; + + pwr_opmode = rt1719_get_pwr_opmode(data->conn_info, data->conn_stat); + data_role = rt1719_get_data_role(data->conn_info); + + typec_set_pwr_opmode(data->port, pwr_opmode); + rt1719_set_data_role(data, data_role, true); + + if (data->conn_info & RT1719_ATTACH_SNK) + rt1719_register_partner(data); + + if (pwr_opmode == TYPEC_PWR_MODE_3_0A) + curr = 3000; + else if (pwr_opmode == TYPEC_PWR_MODE_1_5A) + curr = 1500; + + data->voltage = volt * 1000; + data->max_current = data->op_current = curr * 1000; + data->attached = true; + + power_supply_changed(data->psy); +} + +static void rt1719_detach(struct rt1719_data *data) +{ + if (!data->attached || (data->conn_info & RT1719_ATTACHDEV_MASK)) + return; + + typec_unregister_partner(data->partner); + data->partner = NULL; + + typec_set_pwr_opmode(data->port, TYPEC_PWR_MODE_USB); + rt1719_set_data_role(data, TYPEC_DEVICE, false); + + memset32(data->spdos, 0, RT1719_MAX_SRCPDO); + data->spdo_num = 0; + data->voltage = data->max_current = data->op_current = 0; + data->attached = data->pd_capable = false; + + data->usb_type = POWER_SUPPLY_USB_TYPE_C; + + power_supply_changed(data->psy); +} + +static void rt1719_update_operating_status(struct rt1719_data *data) +{ + enum power_supply_usb_type usb_type = POWER_SUPPLY_USB_TYPE_PD; + u32 voltage, max_current, op_current; + int i, snk_sel; + + for (i = 0; i < data->spdo_num; i++) { + u32 pdo = data->spdos[i]; + enum pd_pdo_type type = pdo_type(pdo); + + if (type == PDO_TYPE_APDO) { + usb_type = POWER_SUPPLY_USB_TYPE_PD_PPS; + break; + } + } + + data->spdo_sel = FIELD_GET(RT1719_SPDOSEL_MASK, data->conn_info); + if (data->spdo_sel <= 0) + return; + + data->usb_type = usb_type; + + voltage = pdo_fixed_voltage(data->spdos[data->spdo_sel - 1]); + max_current = pdo_max_current(data->spdos[data->spdo_sel - 1]); + + switch (voltage) { + case 5000: + snk_sel = RT1719_SNKCAP_5V; + break; + case 9000: + snk_sel = RT1719_SNKCAP_9V; + break; + case 12000: + snk_sel = RT1719_SNKCAP_12V; + break; + case 15000: + snk_sel = RT1719_SNKCAP_15V; + break; + case 20000: + snk_sel = RT1719_SNKCAP_20V; + break; + default: + return; + } + + op_current = min(max_current, pdo_max_current(data->snkcaps[snk_sel])); + + /* covert mV/mA to uV/uA */ + data->voltage = voltage * 1000; + data->max_current = max_current * 1000; + data->op_current = op_current * 1000; + + power_supply_changed(data->psy); +} + +static void rt1719_update_pwr_opmode(struct rt1719_data *data) +{ + if (!data->attached) + return; + + if (!data->pd_capable) { + data->pd_capable = true; + + typec_set_pwr_opmode(data->port, TYPEC_PWR_MODE_PD); + rt1719_register_partner(data); + } + + rt1719_update_operating_status(data); +} + +static void rt1719_update_source_pdos(struct rt1719_data *data) +{ + int spdo_num = FIELD_GET(RT1719_SPDONUM_MASK, data->conn_info); + __le32 src_pdos[RT1719_MAX_SRCPDO] = { }; + int i, ret; + + if (!data->attached) + return; + + ret = regmap_raw_read(data->regmap, RT1719_REG_SRCPDO1, src_pdos, + sizeof(__le32) * spdo_num); + if (ret) + return; + + data->spdo_num = spdo_num; + for (i = 0; i < spdo_num; i++) + data->spdos[i] = le32_to_cpu(src_pdos[i]); +} + +static int rt1719_dr_set(struct typec_port *port, enum typec_data_role role) +{ + struct rt1719_data *data = typec_get_drvdata(port); + enum typec_data_role cur_role; + int ret; + + if (!data->attached || !data->pd_capable || !data->drswap_support) + return -EOPNOTSUPP; + + if (data->spdo_num > 0 && !(data->spdos[0] & PDO_FIXED_DATA_SWAP)) + return -EINVAL; + + cur_role = rt1719_get_data_role(data->conn_info); + if (cur_role == role) + return 0; + + ret = regmap_update_bits(data->regmap, RT1719_REG_TXCTRL1, + RT1719_REQDRSWAP_MASK, RT1719_REQDRSWAP_MASK); + if (ret) + return ret; + + reinit_completion(&data->req_completion); + ret = wait_for_completion_timeout(&data->req_completion, + msecs_to_jiffies(400)); + if (ret == 0) + return -ETIMEDOUT; + + cur_role = rt1719_get_data_role(data->conn_info); + if (cur_role != role) + return -EAGAIN; + + rt1719_set_data_role(data, role, true); + return 0; +} + +static const struct typec_operations rt1719_port_ops = { + .dr_set = rt1719_dr_set, +}; + +static int rt1719_usbpd_request_voltage(struct rt1719_data *data) +{ + u32 src_voltage; + int snk_sel, src_sel = -1; + int i, ret; + + if (!data->attached || !data->pd_capable || data->spdo_sel <= 0) + return -EINVAL; + + src_voltage = pdo_fixed_voltage(data->spdos[data->spdo_sel - 1]); + if (src_voltage == data->req_voltage) + return 0; + + switch (data->req_voltage) { + case 5000: + snk_sel = RT1719_SNKCAP_5V; + break; + case 9000: + snk_sel = RT1719_SNKCAP_9V; + break; + case 12000: + snk_sel = RT1719_SNKCAP_12V; + break; + case 15000: + snk_sel = RT1719_SNKCAP_15V; + break; + case 20000: + snk_sel = RT1719_SNKCAP_20V; + break; + default: + return -EINVAL; + } + + if (!(data->snkcaps[snk_sel] & RT1719_PSEL_SUPPORT)) + return -EINVAL; + + for (i = 0; i < data->spdo_num; i++) { + enum pd_pdo_type type = pdo_type(data->spdos[i]); + + if (type != PDO_TYPE_FIXED) + continue; + + src_voltage = pdo_fixed_voltage(data->spdos[i]); + if (src_voltage == data->req_voltage) { + src_sel = i; + break; + } + } + + if (src_sel == -1) + return -EOPNOTSUPP; + + ret = regmap_update_bits(data->regmap, RT1719_REG_TXCTRL1, + RT1719_EVALMODE_MASK | RT1719_REQSRCPDO_MASK, + RT1719_EVALMODE_MASK | (src_sel + 1)); + ret |= regmap_update_bits(data->regmap, RT1719_REG_TXCTRL2, + RT1719_TXSPDOREQ_MASK, RT1719_TXSPDOREQ_MASK); + if (ret) + return ret; + + reinit_completion(&data->req_completion); + ret = wait_for_completion_timeout(&data->req_completion, + msecs_to_jiffies(400)); + if (!ret) + return -ETIMEDOUT; + + return 0; +} + +static int rt1719_psy_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct rt1719_data *data = power_supply_get_drvdata(psy); + + if (psp == POWER_SUPPLY_PROP_VOLTAGE_NOW) { + data->req_voltage = val->intval / 1000; + return rt1719_usbpd_request_voltage(data); + } + + return -EINVAL; +} + +static int rt1719_psy_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct rt1719_data *data = power_supply_get_drvdata(psy); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = data->attached ? 1 : 0; + break; + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = data->usb_type; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = data->voltage; + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + val->intval = data->max_current; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = data->op_current; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int rt1719_psy_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + if (psp == POWER_SUPPLY_PROP_VOLTAGE_NOW) + return 1; + return 0; +} + +static int devm_rt1719_psy_register(struct rt1719_data *data) +{ + struct power_supply_config psy_cfg = { }; + char *psy_name; + + psy_cfg.fwnode = dev_fwnode(data->dev); + psy_cfg.drv_data = data; + + psy_name = devm_kasprintf(data->dev, GFP_KERNEL, "rt1719-source-psy-%s", + dev_name(data->dev)); + if (!psy_name) + return -ENOMEM; + + data->psy_desc.name = psy_name; + data->psy_desc.type = POWER_SUPPLY_TYPE_USB; + data->psy_desc.usb_types = rt1719_psy_usb_types; + data->psy_desc.num_usb_types = ARRAY_SIZE(rt1719_psy_usb_types); + data->psy_desc.properties = rt1719_psy_properties; + data->psy_desc.num_properties = ARRAY_SIZE(rt1719_psy_properties); + data->psy_desc.get_property = rt1719_psy_get_property; + data->psy_desc.set_property = rt1719_psy_set_property; + data->psy_desc.property_is_writeable = rt1719_psy_property_is_writeable; + + data->usb_type = POWER_SUPPLY_USB_TYPE_C; + + data->psy = devm_power_supply_register(data->dev, &data->psy_desc, + &psy_cfg); + + return PTR_ERR_OR_ZERO(data->psy); +} + +static irqreturn_t rt1719_irq_handler(int irq, void *priv) +{ + struct rt1719_data *data = priv; + u32 events, conn_info; + u16 conn_stat; + int ret; + + ret = rt1719_read32(data, RT1719_REG_EVENTS, &events); + ret |= rt1719_read32(data, RT1719_REG_POLICYINFO, &conn_info); + ret |= rt1719_read16(data, RT1719_REG_STATS, &conn_stat); + if (ret) + return IRQ_NONE; + + data->conn_info = conn_info; + data->conn_stat = conn_stat; + + events &= (RT1719_INT_DRSW_ACCEPT | RT1719_INT_RX_SRCCAP | + RT1719_INT_VBUS_PRESENT | RT1719_INT_VBUS_DCT | + RT1719_INT_PE_SNK_RDY); + + if (events & RT1719_INT_DRSW_ACCEPT) + rt1719_update_data_role(data); + + if (events & RT1719_INT_VBUS_PRESENT) + rt1719_attach(data); + + if (events & RT1719_INT_VBUS_DCT) + rt1719_detach(data); + + if (events & RT1719_INT_RX_SRCCAP) + rt1719_update_source_pdos(data); + + if (events & RT1719_INT_PE_SNK_RDY) { + complete(&data->req_completion); + rt1719_update_pwr_opmode(data); + } + + /* Write 1 to clear already handled events */ + rt1719_write32(data, RT1719_REG_EVENTS, events); + + return IRQ_HANDLED; +} + +static int rt1719_irq_init(struct rt1719_data *data) +{ + struct i2c_client *i2c = to_i2c_client(data->dev); + u32 irq_enable; + int ret; + + irq_enable = RT1719_INT_DRSW_ACCEPT | RT1719_INT_RX_SRCCAP | + RT1719_INT_VBUS_DCT | RT1719_INT_VBUS_PRESENT | + RT1719_INT_PE_SNK_RDY; + + ret = rt1719_write32(data, RT1719_REG_MASKS, irq_enable); + if (ret) { + dev_err(&i2c->dev, "Failed to config irq enable\n"); + return ret; + } + + return devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, + rt1719_irq_handler, IRQF_ONESHOT, + dev_name(&i2c->dev), data); +} + +static int rt1719_init_attach_state(struct rt1719_data *data) +{ + u32 conn_info, irq_clear; + u16 conn_stat; + int ret; + + irq_clear = RT1719_INT_DRSW_ACCEPT | RT1719_INT_RX_SRCCAP | + RT1719_INT_VBUS_DCT | RT1719_INT_VBUS_PRESENT | + RT1719_INT_PE_SNK_RDY; + + ret = rt1719_read32(data, RT1719_REG_POLICYINFO, &conn_info); + ret |= rt1719_read16(data, RT1719_REG_STATS, &conn_stat); + ret |= rt1719_write32(data, RT1719_REG_EVENTS, irq_clear); + if (ret) + return ret; + + data->conn_info = conn_info; + data->conn_stat = conn_stat; + + if (conn_info & RT1719_ATTACHDEV_MASK) + rt1719_attach(data); + + if (conn_info & RT1719_PE_EXP_CONTRACT) { + rt1719_update_source_pdos(data); + rt1719_update_pwr_opmode(data); + } + + return 0; +} + +#define RT1719_PSEL_CAPINFO(_lomask, _milliwatt, _himask, _milliamp) { \ + .lomask = _lomask, \ + .milliwatt = _milliwatt, \ + .himask = _himask, \ + .milliamp = _milliamp, \ +} + +static const struct rt1719_psel_cap rt1719_psel_caps[] = { + RT1719_PSEL_CAPINFO(0x18, 75000, 0x10, 5000), + RT1719_PSEL_CAPINFO(0x18, 60000, 0x10, 4500), + RT1719_PSEL_CAPINFO(0x18, 45000, 0x10, 4000), + RT1719_PSEL_CAPINFO(0x18, 30000, 0x10, 3500), + RT1719_PSEL_CAPINFO(0x18, 25000, 0x10, 3000), + RT1719_PSEL_CAPINFO(0x18, 20000, 0x10, 2500), + RT1719_PSEL_CAPINFO(0x18, 15000, 0x10, 2000), + RT1719_PSEL_CAPINFO(0x18, 10000, 0x10, 1000), + RT1719_PSEL_CAPINFO(0x1C, 60000, 0x1F, 5000), + RT1719_PSEL_CAPINFO(0x1C, 45000, 0x1F, 4500), + RT1719_PSEL_CAPINFO(0x1C, 30000, 0x1F, 4000), + RT1719_PSEL_CAPINFO(0x1C, 24000, 0x1F, 3500), + RT1719_PSEL_CAPINFO(0x1C, 15000, 0x1F, 3000), + RT1719_PSEL_CAPINFO(0x1C, 10000, 0x1F, 2500), + RT1719_PSEL_CAPINFO(0x0C, 60000, 0x1F, 2000), + RT1719_PSEL_CAPINFO(0x0C, 45000, 0x1F, 1000), + RT1719_PSEL_CAPINFO(0x0C, 36000, 0x08, 5000), + RT1719_PSEL_CAPINFO(0x0C, 30000, 0x08, 4500), + RT1719_PSEL_CAPINFO(0x0C, 24000, 0x08, 4000), + RT1719_PSEL_CAPINFO(0x0C, 15000, 0x08, 3500), + RT1719_PSEL_CAPINFO(0x0C, 10000, 0x08, 3000), + RT1719_PSEL_CAPINFO(0x1E, 45000, 0x08, 2500), + RT1719_PSEL_CAPINFO(0x1E, 36000, 0x08, 2000), + RT1719_PSEL_CAPINFO(0x1E, 27000, 0x08, 1500), + RT1719_PSEL_CAPINFO(0x1E, 20000, 0x08, 1000), + RT1719_PSEL_CAPINFO(0x1E, 15000, 0x0F, 5000), + RT1719_PSEL_CAPINFO(0x1E, 9000, 0x0F, 4500), + RT1719_PSEL_CAPINFO(0x0E, 45000, 0x0F, 4000), + RT1719_PSEL_CAPINFO(0x0E, 36000, 0x0F, 3500), + RT1719_PSEL_CAPINFO(0x0E, 27000, 0x0F, 3000), + RT1719_PSEL_CAPINFO(0x0E, 20000, 0x0F, 2500), + RT1719_PSEL_CAPINFO(0x0E, 15000, 0x0F, 2000), + RT1719_PSEL_CAPINFO(0x0E, 9000, 0x0F, 1500), + RT1719_PSEL_CAPINFO(0x06, 45000, 0x0F, 1000), + RT1719_PSEL_CAPINFO(0x06, 36000, 0x0F, 500), + RT1719_PSEL_CAPINFO(0x06, 27000, 0x04, 5000), + RT1719_PSEL_CAPINFO(0x06, 24000, 0x04, 4500), + RT1719_PSEL_CAPINFO(0x06, 18000, 0x04, 4000), + RT1719_PSEL_CAPINFO(0x06, 12000, 0x04, 3500), + RT1719_PSEL_CAPINFO(0x06, 9000, 0x04, 3000), + RT1719_PSEL_CAPINFO(0x1F, 25000, 0x04, 2500), + RT1719_PSEL_CAPINFO(0x1F, 20000, 0x04, 2000), + RT1719_PSEL_CAPINFO(0x1F, 15000, 0x04, 1500), + RT1719_PSEL_CAPINFO(0x1F, 10000, 0x04, 1000), + RT1719_PSEL_CAPINFO(0x1F, 7500, 0x07, 5000), + RT1719_PSEL_CAPINFO(0x0F, 25000, 0x07, 4500), + RT1719_PSEL_CAPINFO(0x0F, 20000, 0x07, 4000), + RT1719_PSEL_CAPINFO(0x0F, 15000, 0x07, 3500), + RT1719_PSEL_CAPINFO(0x0F, 10000, 0x07, 3000), + RT1719_PSEL_CAPINFO(0x0F, 7500, 0x07, 2500), + RT1719_PSEL_CAPINFO(0x07, 25000, 0x07, 2000), + RT1719_PSEL_CAPINFO(0x07, 20000, 0x07, 1500), + RT1719_PSEL_CAPINFO(0x07, 15000, 0x07, 1000), + RT1719_PSEL_CAPINFO(0x07, 10000, 0x07, 500), + RT1719_PSEL_CAPINFO(0x07, 7500, 0x03, 5000), + RT1719_PSEL_CAPINFO(0x03, 25000, 0x03, 4500), + RT1719_PSEL_CAPINFO(0x03, 20000, 0x03, 4000), + RT1719_PSEL_CAPINFO(0x03, 15000, 0x03, 3500), + RT1719_PSEL_CAPINFO(0x03, 10000, 0x03, 3000), + RT1719_PSEL_CAPINFO(0x03, 7500, 0x03, 2500), + RT1719_PSEL_CAPINFO(0x01, 15000, 0x03, 2000), + RT1719_PSEL_CAPINFO(0x01, 10000, 0x03, 1500), + RT1719_PSEL_CAPINFO(0x01, 7500, 0x03, 1000), + RT1719_PSEL_CAPINFO(0x01, 2500, 0x03, 500) +}; + +static u16 rt1719_gen_snkcap_by_current(const struct rt1719_psel_cap *psel_cap, + enum rt1719_snkcap capsel) +{ + u16 cap = RT1719_PSEL_SUPPORT; + + if (!(psel_cap->himask & BIT(capsel))) + return 0; + + cap |= psel_cap->milliamp / 10; + return cap; +} + +static u16 rt1719_gen_snkcap_by_watt(const struct rt1719_psel_cap *psel_cap, + enum rt1719_snkcap capsel) +{ + u32 volt_div[RT1719_MAX_SNKCAP] = { 5, 9, 12, 15, 20 }; + u16 cap = RT1719_PSEL_SUPPORT; + + if (!(psel_cap->lomask & BIT(capsel))) + return 0; + + cap |= min(psel_cap->milliwatt / volt_div[capsel], (u32)5000) / 10; + return cap; +} + +static u16 rt1719_gen_snkcap(unsigned int pselinfo, enum rt1719_snkcap capsel) +{ + int psel = FIELD_GET(RT1719_LATPSEL_MASK, pselinfo); + const struct rt1719_psel_cap *psel_cap; + bool by_current = false; + + if (pselinfo & RT1719_TBLSEL_MASK) + by_current = true; + + psel_cap = rt1719_psel_caps + psel; + if (by_current) + return rt1719_gen_snkcap_by_current(psel_cap, capsel); + + return rt1719_gen_snkcap_by_watt(psel_cap, capsel); +} + +static int rt1719_get_caps(struct rt1719_data *data) +{ + unsigned int pselinfo, usbinfo; + int i, ret; + + ret = regmap_read(data->regmap, RT1719_REG_PSELINFO, &pselinfo); + ret |= regmap_read(data->regmap, RT1719_REG_USBSETINFO, &usbinfo); + if (ret) + return ret; + + for (i = 0; i < RT1719_MAX_SNKCAP; i++) + data->snkcaps[i] = rt1719_gen_snkcap(pselinfo, i); + + usbinfo = FIELD_GET(RT1719_USBINFO_MASK, usbinfo); + if (usbinfo == RT1719_USB_DFPUFP) + data->drswap_support = true; + + return 0; +} + +static int rt1719_check_exist(struct rt1719_data *data) +{ + u16 pid; + int ret; + + ret = rt1719_read16(data, RT1719_REG_VENID, &pid); + if (ret) + return ret; + + if (pid != RT1719_UNIQUE_PID) { + dev_err(data->dev, "Incorrect PID 0x%04x\n", pid); + return -ENODEV; + } + + return 0; +} + +static const struct regmap_config rt1719_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xff, +}; + +static int rt1719_probe(struct i2c_client *i2c) +{ + struct rt1719_data *data; + struct fwnode_handle *fwnode; + struct typec_capability typec_cap = { }; + int ret; + + data = devm_kzalloc(&i2c->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->dev = &i2c->dev; + init_completion(&data->req_completion); + + data->regmap = devm_regmap_init_i2c(i2c, &rt1719_regmap_config); + if (IS_ERR(data->regmap)) { + ret = PTR_ERR(data->regmap); + dev_err(&i2c->dev, "Failed to init regmap (%d)\n", ret); + return ret; + } + + ret = rt1719_check_exist(data); + if (ret) + return ret; + + ret = rt1719_get_caps(data); + if (ret) + return ret; + + fwnode = device_get_named_child_node(&i2c->dev, "connector"); + if (!fwnode) + return -ENODEV; + + data->role_sw = fwnode_usb_role_switch_get(fwnode); + if (IS_ERR(data->role_sw)) { + ret = PTR_ERR(data->role_sw); + dev_err(&i2c->dev, "Failed to get usb role switch (%d)\n", ret); + goto err_fwnode_put; + } + + ret = devm_rt1719_psy_register(data); + if (ret) { + dev_err(&i2c->dev, "Failed to register psy (%d)\n", ret); + goto err_role_put; + } + + typec_cap.revision = USB_TYPEC_REV_1_2; + typec_cap.pd_revision = 0x300; /* USB-PD spec release 3.0 */ + typec_cap.type = TYPEC_PORT_SNK; + typec_cap.data = TYPEC_PORT_DRD; + typec_cap.ops = &rt1719_port_ops; + typec_cap.fwnode = fwnode; + typec_cap.driver_data = data; + typec_cap.accessory[0] = TYPEC_ACCESSORY_DEBUG; + + data->partner_desc.identity = &data->partner_ident; + + data->port = typec_register_port(&i2c->dev, &typec_cap); + if (IS_ERR(data->port)) { + ret = PTR_ERR(data->port); + dev_err(&i2c->dev, "Failed to register typec port (%d)\n", ret); + goto err_role_put; + } + + ret = rt1719_init_attach_state(data); + if (ret) { + dev_err(&i2c->dev, "Failed to init attach state (%d)\n", ret); + goto err_role_put; + } + + ret = rt1719_irq_init(data); + if (ret) { + dev_err(&i2c->dev, "Failed to init irq\n"); + goto err_role_put; + } + + fwnode_handle_put(fwnode); + + i2c_set_clientdata(i2c, data); + + return 0; + +err_role_put: + usb_role_switch_put(data->role_sw); +err_fwnode_put: + fwnode_handle_put(fwnode); + + return ret; +} + +static void rt1719_remove(struct i2c_client *i2c) +{ + struct rt1719_data *data = i2c_get_clientdata(i2c); + + typec_unregister_port(data->port); + usb_role_switch_put(data->role_sw); +} + +static const struct of_device_id __maybe_unused rt1719_device_table[] = { + { .compatible = "richtek,rt1719", }, + { } +}; +MODULE_DEVICE_TABLE(of, rt1719_device_table); + +static struct i2c_driver rt1719_driver = { + .driver = { + .name = "rt1719", + .of_match_table = rt1719_device_table, + }, + .probe = rt1719_probe, + .remove = rt1719_remove, +}; +module_i2c_driver(rt1719_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("Richtek RT1719 Sink Only USBPD Controller Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c new file mode 100644 index 0000000000..3ab118df1b --- /dev/null +++ b/drivers/usb/typec/stusb160x.c @@ -0,0 +1,880 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * STMicroelectronics STUSB160x Type-C controller family driver + * + * Copyright (C) 2020, STMicroelectronics + * Author(s): Amelie Delaunay <amelie.delaunay@st.com> + */ + +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/role.h> +#include <linux/usb/typec.h> + +#define STUSB160X_ALERT_STATUS 0x0B /* RC */ +#define STUSB160X_ALERT_STATUS_MASK_CTRL 0x0C /* RW */ +#define STUSB160X_CC_CONNECTION_STATUS_TRANS 0x0D /* RC */ +#define STUSB160X_CC_CONNECTION_STATUS 0x0E /* RO */ +#define STUSB160X_MONITORING_STATUS_TRANS 0x0F /* RC */ +#define STUSB160X_MONITORING_STATUS 0x10 /* RO */ +#define STUSB160X_CC_OPERATION_STATUS 0x11 /* RO */ +#define STUSB160X_HW_FAULT_STATUS_TRANS 0x12 /* RC */ +#define STUSB160X_HW_FAULT_STATUS 0x13 /* RO */ +#define STUSB160X_CC_CAPABILITY_CTRL 0x18 /* RW */ +#define STUSB160X_CC_VCONN_SWITCH_CTRL 0x1E /* RW */ +#define STUSB160X_VCONN_MONITORING_CTRL 0x20 /* RW */ +#define STUSB160X_VBUS_MONITORING_RANGE_CTRL 0x22 /* RW */ +#define STUSB160X_RESET_CTRL 0x23 /* RW */ +#define STUSB160X_VBUS_DISCHARGE_TIME_CTRL 0x25 /* RW */ +#define STUSB160X_VBUS_DISCHARGE_STATUS 0x26 /* RO */ +#define STUSB160X_VBUS_ENABLE_STATUS 0x27 /* RO */ +#define STUSB160X_CC_POWER_MODE_CTRL 0x28 /* RW */ +#define STUSB160X_VBUS_MONITORING_CTRL 0x2E /* RW */ +#define STUSB1600_REG_MAX 0x2F /* RO - Reserved */ + +/* STUSB160X_ALERT_STATUS/STUSB160X_ALERT_STATUS_MASK_CTRL bitfields */ +#define STUSB160X_HW_FAULT BIT(4) +#define STUSB160X_MONITORING BIT(5) +#define STUSB160X_CC_CONNECTION BIT(6) +#define STUSB160X_ALL_ALERTS GENMASK(6, 4) + +/* STUSB160X_CC_CONNECTION_STATUS_TRANS bitfields */ +#define STUSB160X_CC_ATTACH_TRANS BIT(0) + +/* STUSB160X_CC_CONNECTION_STATUS bitfields */ +#define STUSB160X_CC_ATTACH BIT(0) +#define STUSB160X_CC_VCONN_SUPPLY BIT(1) +#define STUSB160X_CC_DATA_ROLE(s) (!!((s) & BIT(2))) +#define STUSB160X_CC_POWER_ROLE(s) (!!((s) & BIT(3))) +#define STUSB160X_CC_ATTACHED_MODE GENMASK(7, 5) + +/* STUSB160X_MONITORING_STATUS_TRANS bitfields */ +#define STUSB160X_VCONN_PRESENCE_TRANS BIT(0) +#define STUSB160X_VBUS_PRESENCE_TRANS BIT(1) +#define STUSB160X_VBUS_VSAFE0V_TRANS BIT(2) +#define STUSB160X_VBUS_VALID_TRANS BIT(3) + +/* STUSB160X_MONITORING_STATUS bitfields */ +#define STUSB160X_VCONN_PRESENCE BIT(0) +#define STUSB160X_VBUS_PRESENCE BIT(1) +#define STUSB160X_VBUS_VSAFE0V BIT(2) +#define STUSB160X_VBUS_VALID BIT(3) + +/* STUSB160X_CC_OPERATION_STATUS bitfields */ +#define STUSB160X_TYPEC_FSM_STATE GENMASK(4, 0) +#define STUSB160X_SINK_POWER_STATE GENMASK(6, 5) +#define STUSB160X_CC_ATTACHED BIT(7) + +/* STUSB160X_HW_FAULT_STATUS_TRANS bitfields */ +#define STUSB160X_VCONN_SW_OVP_FAULT_TRANS BIT(0) +#define STUSB160X_VCONN_SW_OCP_FAULT_TRANS BIT(1) +#define STUSB160X_VCONN_SW_RVP_FAULT_TRANS BIT(2) +#define STUSB160X_VPU_VALID_TRANS BIT(4) +#define STUSB160X_VPU_OVP_FAULT_TRANS BIT(5) +#define STUSB160X_THERMAL_FAULT BIT(7) + +/* STUSB160X_HW_FAULT_STATUS bitfields */ +#define STUSB160X_VCONN_SW_OVP_FAULT_CC2 BIT(0) +#define STUSB160X_VCONN_SW_OVP_FAULT_CC1 BIT(1) +#define STUSB160X_VCONN_SW_OCP_FAULT_CC2 BIT(2) +#define STUSB160X_VCONN_SW_OCP_FAULT_CC1 BIT(3) +#define STUSB160X_VCONN_SW_RVP_FAULT_CC2 BIT(4) +#define STUSB160X_VCONN_SW_RVP_FAULT_CC1 BIT(5) +#define STUSB160X_VPU_VALID BIT(6) +#define STUSB160X_VPU_OVP_FAULT BIT(7) + +/* STUSB160X_CC_CAPABILITY_CTRL bitfields */ +#define STUSB160X_CC_VCONN_SUPPLY_EN BIT(0) +#define STUSB160X_CC_VCONN_DISCHARGE_EN BIT(4) +#define STUSB160X_CC_CURRENT_ADVERTISED GENMASK(7, 6) + +/* STUSB160X_VCONN_SWITCH_CTRL bitfields */ +#define STUSB160X_CC_VCONN_SWITCH_ILIM GENMASK(3, 0) + +/* STUSB160X_VCONN_MONITORING_CTRL bitfields */ +#define STUSB160X_VCONN_UVLO_THRESHOLD BIT(6) +#define STUSB160X_VCONN_MONITORING_EN BIT(7) + +/* STUSB160X_VBUS_MONITORING_RANGE_CTRL bitfields */ +#define STUSB160X_SHIFT_LOW_VBUS_LIMIT GENMASK(3, 0) +#define STUSB160X_SHIFT_HIGH_VBUS_LIMIT GENMASK(7, 4) + +/* STUSB160X_RESET_CTRL bitfields */ +#define STUSB160X_SW_RESET_EN BIT(0) + +/* STUSB160X_VBUS_DISCHARGE_TIME_CTRL bitfields */ +#define STUSBXX02_VBUS_DISCHARGE_TIME_TO_PDO GENMASK(3, 0) +#define STUSB160X_VBUS_DISCHARGE_TIME_TO_0V GENMASK(7, 4) + +/* STUSB160X_VBUS_DISCHARGE_STATUS bitfields */ +#define STUSB160X_VBUS_DISCHARGE_EN BIT(7) + +/* STUSB160X_VBUS_ENABLE_STATUS bitfields */ +#define STUSB160X_VBUS_SOURCE_EN BIT(0) +#define STUSB160X_VBUS_SINK_EN BIT(1) + +/* STUSB160X_CC_POWER_MODE_CTRL bitfields */ +#define STUSB160X_CC_POWER_MODE GENMASK(2, 0) + +/* STUSB160X_VBUS_MONITORING_CTRL bitfields */ +#define STUSB160X_VDD_UVLO_DISABLE BIT(0) +#define STUSB160X_VBUS_VSAFE0V_THRESHOLD GENMASK(2, 1) +#define STUSB160X_VBUS_RANGE_DISABLE BIT(4) +#define STUSB160X_VDD_OVLO_DISABLE BIT(6) + +enum stusb160x_pwr_mode { + SOURCE_WITH_ACCESSORY, + SINK_WITH_ACCESSORY, + SINK_WITHOUT_ACCESSORY, + DUAL_WITH_ACCESSORY, + DUAL_WITH_ACCESSORY_AND_TRY_SRC, + DUAL_WITH_ACCESSORY_AND_TRY_SNK, +}; + +enum stusb160x_attached_mode { + NO_DEVICE_ATTACHED, + SINK_ATTACHED, + SOURCE_ATTACHED, + DEBUG_ACCESSORY_ATTACHED, + AUDIO_ACCESSORY_ATTACHED, +}; + +struct stusb160x { + struct device *dev; + struct regmap *regmap; + struct regulator *vdd_supply; + struct regulator *vsys_supply; + struct regulator *vconn_supply; + struct regulator *main_supply; + + struct typec_port *port; + struct typec_capability capability; + struct typec_partner *partner; + + enum typec_port_type port_type; + enum typec_pwr_opmode pwr_opmode; + bool vbus_on; + + struct usb_role_switch *role_sw; +}; + +static bool stusb160x_reg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STUSB160X_ALERT_STATUS_MASK_CTRL: + case STUSB160X_CC_CAPABILITY_CTRL: + case STUSB160X_CC_VCONN_SWITCH_CTRL: + case STUSB160X_VCONN_MONITORING_CTRL: + case STUSB160X_VBUS_MONITORING_RANGE_CTRL: + case STUSB160X_RESET_CTRL: + case STUSB160X_VBUS_DISCHARGE_TIME_CTRL: + case STUSB160X_CC_POWER_MODE_CTRL: + case STUSB160X_VBUS_MONITORING_CTRL: + return true; + default: + return false; + } +} + +static bool stusb160x_reg_readable(struct device *dev, unsigned int reg) +{ + if (reg <= 0x0A || + (reg >= 0x14 && reg <= 0x17) || + (reg >= 0x19 && reg <= 0x1D) || + (reg >= 0x29 && reg <= 0x2D) || + (reg == 0x1F || reg == 0x21 || reg == 0x24 || reg == 0x2F)) + return false; + else + return true; +} + +static bool stusb160x_reg_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STUSB160X_ALERT_STATUS: + case STUSB160X_CC_CONNECTION_STATUS_TRANS: + case STUSB160X_CC_CONNECTION_STATUS: + case STUSB160X_MONITORING_STATUS_TRANS: + case STUSB160X_MONITORING_STATUS: + case STUSB160X_CC_OPERATION_STATUS: + case STUSB160X_HW_FAULT_STATUS_TRANS: + case STUSB160X_HW_FAULT_STATUS: + case STUSB160X_VBUS_DISCHARGE_STATUS: + case STUSB160X_VBUS_ENABLE_STATUS: + return true; + default: + return false; + } +} + +static bool stusb160x_reg_precious(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STUSB160X_ALERT_STATUS: + case STUSB160X_CC_CONNECTION_STATUS_TRANS: + case STUSB160X_MONITORING_STATUS_TRANS: + case STUSB160X_HW_FAULT_STATUS_TRANS: + return true; + default: + return false; + } +} + +static const struct regmap_config stusb1600_regmap_config = { + .reg_bits = 8, + .reg_stride = 1, + .val_bits = 8, + .max_register = STUSB1600_REG_MAX, + .writeable_reg = stusb160x_reg_writeable, + .readable_reg = stusb160x_reg_readable, + .volatile_reg = stusb160x_reg_volatile, + .precious_reg = stusb160x_reg_precious, + .cache_type = REGCACHE_RBTREE, +}; + +static bool stusb160x_get_vconn(struct stusb160x *chip) +{ + u32 val; + int ret; + + ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val); + if (ret) { + dev_err(chip->dev, "Unable to get Vconn status: %d\n", ret); + return false; + } + + return !!FIELD_GET(STUSB160X_CC_VCONN_SUPPLY_EN, val); +} + +static int stusb160x_set_vconn(struct stusb160x *chip, bool on) +{ + int ret; + + /* Manage VCONN input supply */ + if (chip->vconn_supply) { + if (on) { + ret = regulator_enable(chip->vconn_supply); + if (ret) { + dev_err(chip->dev, + "failed to enable vconn supply: %d\n", + ret); + return ret; + } + } else { + regulator_disable(chip->vconn_supply); + } + } + + /* Manage VCONN monitoring and power path */ + ret = regmap_update_bits(chip->regmap, STUSB160X_VCONN_MONITORING_CTRL, + STUSB160X_VCONN_MONITORING_EN, + on ? STUSB160X_VCONN_MONITORING_EN : 0); + if (ret) + goto vconn_reg_disable; + + return 0; + +vconn_reg_disable: + if (chip->vconn_supply && on) + regulator_disable(chip->vconn_supply); + + return ret; +} + +static enum typec_pwr_opmode stusb160x_get_pwr_opmode(struct stusb160x *chip) +{ + u32 val; + int ret; + + ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val); + if (ret) { + dev_err(chip->dev, "Unable to get pwr opmode: %d\n", ret); + return TYPEC_PWR_MODE_USB; + } + + return FIELD_GET(STUSB160X_CC_CURRENT_ADVERTISED, val); +} + +static enum typec_accessory stusb160x_get_accessory(u32 status) +{ + enum stusb160x_attached_mode mode; + + mode = FIELD_GET(STUSB160X_CC_ATTACHED_MODE, status); + + switch (mode) { + case DEBUG_ACCESSORY_ATTACHED: + return TYPEC_ACCESSORY_DEBUG; + case AUDIO_ACCESSORY_ATTACHED: + return TYPEC_ACCESSORY_AUDIO; + default: + return TYPEC_ACCESSORY_NONE; + } +} + +static enum typec_role stusb160x_get_vconn_role(u32 status) +{ + if (FIELD_GET(STUSB160X_CC_VCONN_SUPPLY, status)) + return TYPEC_SOURCE; + + return TYPEC_SINK; +} + +static void stusb160x_set_data_role(struct stusb160x *chip, + enum typec_data_role data_role, + bool attached) +{ + enum usb_role usb_role = USB_ROLE_NONE; + + if (attached) { + if (data_role == TYPEC_HOST) + usb_role = USB_ROLE_HOST; + else + usb_role = USB_ROLE_DEVICE; + } + + usb_role_switch_set_role(chip->role_sw, usb_role); + typec_set_data_role(chip->port, data_role); +} + +static int stusb160x_attach(struct stusb160x *chip, u32 status) +{ + struct typec_partner_desc desc; + int ret; + + if ((STUSB160X_CC_POWER_ROLE(status) == TYPEC_SOURCE) && + chip->vdd_supply) { + ret = regulator_enable(chip->vdd_supply); + if (ret) { + dev_err(chip->dev, + "Failed to enable Vbus supply: %d\n", ret); + return ret; + } + chip->vbus_on = true; + } + + desc.usb_pd = false; + desc.accessory = stusb160x_get_accessory(status); + desc.identity = NULL; + + chip->partner = typec_register_partner(chip->port, &desc); + if (IS_ERR(chip->partner)) { + ret = PTR_ERR(chip->partner); + goto vbus_disable; + } + + typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status)); + typec_set_pwr_opmode(chip->port, stusb160x_get_pwr_opmode(chip)); + typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status)); + stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), true); + + return 0; + +vbus_disable: + if (chip->vbus_on) { + regulator_disable(chip->vdd_supply); + chip->vbus_on = false; + } + + return ret; +} + +static void stusb160x_detach(struct stusb160x *chip, u32 status) +{ + typec_unregister_partner(chip->partner); + chip->partner = NULL; + + typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status)); + typec_set_pwr_opmode(chip->port, TYPEC_PWR_MODE_USB); + typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status)); + stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), false); + + if (chip->vbus_on) { + regulator_disable(chip->vdd_supply); + chip->vbus_on = false; + } +} + +static irqreturn_t stusb160x_irq_handler(int irq, void *data) +{ + struct stusb160x *chip = data; + u32 pending, trans, status; + int ret; + + ret = regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &pending); + if (ret) + goto err; + + if (pending & STUSB160X_CC_CONNECTION) { + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS_TRANS, &trans); + if (ret) + goto err; + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS, &status); + if (ret) + goto err; + + if (trans & STUSB160X_CC_ATTACH_TRANS) { + if (status & STUSB160X_CC_ATTACH) { + ret = stusb160x_attach(chip, status); + if (ret) + goto err; + } else { + stusb160x_detach(chip, status); + } + } + } +err: + return IRQ_HANDLED; +} + +static int stusb160x_irq_init(struct stusb160x *chip, int irq) +{ + u32 status; + int ret; + + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS, &status); + if (ret) + return ret; + + if (status & STUSB160X_CC_ATTACH) { + ret = stusb160x_attach(chip, status); + if (ret) + dev_err(chip->dev, "attach failed: %d\n", ret); + } + + ret = devm_request_threaded_irq(chip->dev, irq, NULL, + stusb160x_irq_handler, IRQF_ONESHOT, + dev_name(chip->dev), chip); + if (ret) + goto partner_unregister; + + /* Unmask CC_CONNECTION events */ + ret = regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_CC_CONNECTION, 0); + if (ret) + goto partner_unregister; + + return 0; + +partner_unregister: + if (chip->partner) { + typec_unregister_partner(chip->partner); + chip->partner = NULL; + } + + return ret; +} + +static int stusb160x_chip_init(struct stusb160x *chip) +{ + u32 val; + int ret; + + /* Change the default Type-C power mode */ + if (chip->port_type == TYPEC_PORT_SRC) + ret = regmap_update_bits(chip->regmap, + STUSB160X_CC_POWER_MODE_CTRL, + STUSB160X_CC_POWER_MODE, + SOURCE_WITH_ACCESSORY); + else if (chip->port_type == TYPEC_PORT_SNK) + ret = regmap_update_bits(chip->regmap, + STUSB160X_CC_POWER_MODE_CTRL, + STUSB160X_CC_POWER_MODE, + SINK_WITH_ACCESSORY); + else /* (chip->port_type == TYPEC_PORT_DRP) */ + ret = regmap_update_bits(chip->regmap, + STUSB160X_CC_POWER_MODE_CTRL, + STUSB160X_CC_POWER_MODE, + DUAL_WITH_ACCESSORY); + if (ret) + return ret; + + if (chip->port_type == TYPEC_PORT_SNK) + goto skip_src; + + /* Change the default Type-C Source power operation mode capability */ + ret = regmap_update_bits(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, + STUSB160X_CC_CURRENT_ADVERTISED, + FIELD_PREP(STUSB160X_CC_CURRENT_ADVERTISED, + chip->pwr_opmode)); + if (ret) + return ret; + + /* Manage Type-C Source Vconn supply */ + if (stusb160x_get_vconn(chip)) { + ret = stusb160x_set_vconn(chip, true); + if (ret) + return ret; + } + +skip_src: + /* Mask all events interrupts - to be unmasked with interrupt support */ + ret = regmap_update_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS); + if (ret) + return ret; + + /* Read status at least once to clear any stale interrupts */ + regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &val); + regmap_read(chip->regmap, STUSB160X_CC_CONNECTION_STATUS_TRANS, &val); + regmap_read(chip->regmap, STUSB160X_MONITORING_STATUS_TRANS, &val); + regmap_read(chip->regmap, STUSB160X_HW_FAULT_STATUS_TRANS, &val); + + return 0; +} + +static int stusb160x_get_fw_caps(struct stusb160x *chip, + struct fwnode_handle *fwnode) +{ + const char *cap_str; + int ret; + + chip->capability.fwnode = fwnode; + + /* + * Supported port type can be configured through device tree + * else it is read from chip registers in stusb160x_get_caps. + */ + ret = fwnode_property_read_string(fwnode, "power-role", &cap_str); + if (!ret) { + ret = typec_find_port_power_role(cap_str); + if (ret < 0) + return ret; + chip->port_type = ret; + } + chip->capability.type = chip->port_type; + + /* Skip DRP/Source capabilities in case of Sink only */ + if (chip->port_type == TYPEC_PORT_SNK) + return 0; + + if (chip->port_type == TYPEC_PORT_DRP) + chip->capability.prefer_role = TYPEC_SINK; + + /* + * Supported power operation mode can be configured through device tree + * else it is read from chip registers in stusb160x_get_caps. + */ + ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &cap_str); + if (!ret) { + ret = typec_find_pwr_opmode(cap_str); + /* Power delivery not yet supported */ + if (ret < 0 || ret == TYPEC_PWR_MODE_PD) { + dev_err(chip->dev, "bad power operation mode: %d\n", ret); + return -EINVAL; + } + chip->pwr_opmode = ret; + } + + return 0; +} + +static int stusb160x_get_caps(struct stusb160x *chip) +{ + enum typec_port_type *type = &chip->capability.type; + enum typec_port_data *data = &chip->capability.data; + enum typec_accessory *accessory = chip->capability.accessory; + u32 val; + int ret; + + chip->capability.revision = USB_TYPEC_REV_1_2; + + ret = regmap_read(chip->regmap, STUSB160X_CC_POWER_MODE_CTRL, &val); + if (ret) + return ret; + + switch (FIELD_GET(STUSB160X_CC_POWER_MODE, val)) { + case SOURCE_WITH_ACCESSORY: + *type = TYPEC_PORT_SRC; + *data = TYPEC_PORT_DFP; + *accessory++ = TYPEC_ACCESSORY_AUDIO; + *accessory++ = TYPEC_ACCESSORY_DEBUG; + break; + case SINK_WITH_ACCESSORY: + *type = TYPEC_PORT_SNK; + *data = TYPEC_PORT_UFP; + *accessory++ = TYPEC_ACCESSORY_AUDIO; + *accessory++ = TYPEC_ACCESSORY_DEBUG; + break; + case SINK_WITHOUT_ACCESSORY: + *type = TYPEC_PORT_SNK; + *data = TYPEC_PORT_UFP; + break; + case DUAL_WITH_ACCESSORY: + case DUAL_WITH_ACCESSORY_AND_TRY_SRC: + case DUAL_WITH_ACCESSORY_AND_TRY_SNK: + *type = TYPEC_PORT_DRP; + *data = TYPEC_PORT_DRD; + *accessory++ = TYPEC_ACCESSORY_AUDIO; + *accessory++ = TYPEC_ACCESSORY_DEBUG; + break; + default: + return -EINVAL; + } + + chip->port_type = *type; + chip->pwr_opmode = stusb160x_get_pwr_opmode(chip); + + return 0; +} + +static const struct of_device_id stusb160x_of_match[] = { + { .compatible = "st,stusb1600", .data = &stusb1600_regmap_config}, + {}, +}; +MODULE_DEVICE_TABLE(of, stusb160x_of_match); + +static int stusb160x_probe(struct i2c_client *client) +{ + struct stusb160x *chip; + const struct of_device_id *match; + struct regmap_config *regmap_config; + struct fwnode_handle *fwnode; + int ret; + + chip = devm_kzalloc(&client->dev, sizeof(struct stusb160x), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + + match = i2c_of_match_device(stusb160x_of_match, client); + regmap_config = (struct regmap_config *)match->data; + chip->regmap = devm_regmap_init_i2c(client, regmap_config); + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + dev_err(&client->dev, + "Failed to allocate register map:%d\n", ret); + return ret; + } + + chip->dev = &client->dev; + + chip->vsys_supply = devm_regulator_get_optional(chip->dev, "vsys"); + if (IS_ERR(chip->vsys_supply)) { + ret = PTR_ERR(chip->vsys_supply); + if (ret != -ENODEV) + return ret; + chip->vsys_supply = NULL; + } + + chip->vdd_supply = devm_regulator_get_optional(chip->dev, "vdd"); + if (IS_ERR(chip->vdd_supply)) { + ret = PTR_ERR(chip->vdd_supply); + if (ret != -ENODEV) + return ret; + chip->vdd_supply = NULL; + } + + chip->vconn_supply = devm_regulator_get_optional(chip->dev, "vconn"); + if (IS_ERR(chip->vconn_supply)) { + ret = PTR_ERR(chip->vconn_supply); + if (ret != -ENODEV) + return ret; + chip->vconn_supply = NULL; + } + + fwnode = device_get_named_child_node(chip->dev, "connector"); + if (!fwnode) + return -ENODEV; + + /* + * This fwnode has a "compatible" property, but is never populated as a + * struct device. Instead we simply parse it to read the properties. + * This it breaks fw_devlink=on. To maintain backward compatibility + * with existing DT files, we work around this by deleting any + * fwnode_links to/from this fwnode. + */ + fw_devlink_purge_absent_suppliers(fwnode); + + /* + * When both VDD and VSYS power supplies are present, the low power + * supply VSYS is selected when VSYS voltage is above 3.1 V. + * Otherwise VDD is selected. + */ + if (chip->vdd_supply && + (!chip->vsys_supply || + (regulator_get_voltage(chip->vsys_supply) <= 3100000))) + chip->main_supply = chip->vdd_supply; + else + chip->main_supply = chip->vsys_supply; + + if (chip->main_supply) { + ret = regulator_enable(chip->main_supply); + if (ret) { + dev_err(chip->dev, + "Failed to enable main supply: %d\n", ret); + goto fwnode_put; + } + } + + /* Get configuration from chip */ + ret = stusb160x_get_caps(chip); + if (ret) { + dev_err(chip->dev, "Failed to get port caps: %d\n", ret); + goto main_reg_disable; + } + + /* Get optional re-configuration from device tree */ + ret = stusb160x_get_fw_caps(chip, fwnode); + if (ret) { + dev_err(chip->dev, "Failed to get connector caps: %d\n", ret); + goto main_reg_disable; + } + + ret = stusb160x_chip_init(chip); + if (ret) { + dev_err(chip->dev, "Failed to init port: %d\n", ret); + goto main_reg_disable; + } + + chip->port = typec_register_port(chip->dev, &chip->capability); + if (IS_ERR(chip->port)) { + ret = PTR_ERR(chip->port); + goto all_reg_disable; + } + + /* + * Default power operation mode initialization: will be updated upon + * attach/detach interrupt + */ + typec_set_pwr_opmode(chip->port, chip->pwr_opmode); + + if (client->irq) { + chip->role_sw = fwnode_usb_role_switch_get(fwnode); + if (IS_ERR(chip->role_sw)) { + ret = dev_err_probe(chip->dev, PTR_ERR(chip->role_sw), + "Failed to get usb role switch\n"); + goto port_unregister; + } + + ret = stusb160x_irq_init(chip, client->irq); + if (ret) + goto role_sw_put; + } else { + /* + * If Source or Dual power role, need to enable VDD supply + * providing Vbus if present. In case of interrupt support, + * VDD supply will be dynamically managed upon attach/detach + * interrupt. + */ + if (chip->port_type != TYPEC_PORT_SNK && chip->vdd_supply) { + ret = regulator_enable(chip->vdd_supply); + if (ret) { + dev_err(chip->dev, + "Failed to enable VDD supply: %d\n", + ret); + goto port_unregister; + } + chip->vbus_on = true; + } + } + + fwnode_handle_put(fwnode); + + return 0; + +role_sw_put: + if (chip->role_sw) + usb_role_switch_put(chip->role_sw); +port_unregister: + typec_unregister_port(chip->port); +all_reg_disable: + if (stusb160x_get_vconn(chip)) + stusb160x_set_vconn(chip, false); +main_reg_disable: + if (chip->main_supply) + regulator_disable(chip->main_supply); +fwnode_put: + fwnode_handle_put(fwnode); + + return ret; +} + +static void stusb160x_remove(struct i2c_client *client) +{ + struct stusb160x *chip = i2c_get_clientdata(client); + + if (chip->partner) { + typec_unregister_partner(chip->partner); + chip->partner = NULL; + } + + if (chip->vbus_on) + regulator_disable(chip->vdd_supply); + + if (chip->role_sw) + usb_role_switch_put(chip->role_sw); + + typec_unregister_port(chip->port); + + if (stusb160x_get_vconn(chip)) + stusb160x_set_vconn(chip, false); + + if (chip->main_supply) + regulator_disable(chip->main_supply); +} + +static int __maybe_unused stusb160x_suspend(struct device *dev) +{ + struct stusb160x *chip = dev_get_drvdata(dev); + + /* Mask interrupts */ + return regmap_update_bits(chip->regmap, + STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS); +} + +static int __maybe_unused stusb160x_resume(struct device *dev) +{ + struct stusb160x *chip = dev_get_drvdata(dev); + u32 status; + int ret; + + ret = regcache_sync(chip->regmap); + if (ret) + return ret; + + /* Check if attach/detach occurred during low power */ + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS, &status); + if (ret) + return ret; + + if (chip->partner && !(status & STUSB160X_CC_ATTACH)) + stusb160x_detach(chip, status); + + if (!chip->partner && (status & STUSB160X_CC_ATTACH)) { + ret = stusb160x_attach(chip, status); + if (ret) + dev_err(chip->dev, "attach failed: %d\n", ret); + } + + /* Unmask interrupts */ + return regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_CC_CONNECTION, 0); +} + +static SIMPLE_DEV_PM_OPS(stusb160x_pm_ops, stusb160x_suspend, stusb160x_resume); + +static struct i2c_driver stusb160x_driver = { + .driver = { + .name = "stusb160x", + .pm = &stusb160x_pm_ops, + .of_match_table = stusb160x_of_match, + }, + .probe = stusb160x_probe, + .remove = stusb160x_remove, +}; +module_i2c_driver(stusb160x_driver); + +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STUSB160x Type-C controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig new file mode 100644 index 0000000000..0b2993fef5 --- /dev/null +++ b/drivers/usb/typec/tcpm/Kconfig @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0 + +config TYPEC_TCPM + tristate "USB Type-C Port Controller Manager" + depends on USB + select USB_ROLE_SWITCH + select POWER_SUPPLY + help + The Type-C Port Controller Manager provides a USB PD and USB Type-C + state machine for use with Type-C Port Controllers. + +if TYPEC_TCPM + +config TYPEC_TCPCI + tristate "Type-C Port Controller Interface driver" + depends on I2C + select REGMAP_I2C + help + Type-C Port Controller driver for TCPCI-compliant controller. + +if TYPEC_TCPCI + +config TYPEC_RT1711H + tristate "Richtek RT1711H Type-C chip driver" + help + Richtek RT1711H Type-C chip driver that works with + Type-C Port Controller Manager to provide USB PD and USB + Type-C functionalities. + +config TYPEC_MT6360 + tristate "Mediatek MT6360 Type-C driver" + depends on MFD_MT6360 + help + Mediatek MT6360 is a multi-functional IC that includes + USB Type-C. It works with Type-C Port Controller Manager + to provide USB PD and USB Type-C functionalities. + +config TYPEC_TCPCI_MT6370 + tristate "MediaTek MT6370 Type-C driver" + depends on MFD_MT6370 + help + MediaTek MT6370 is a multi-functional IC that includes + USB Type-C. It works with Type-C Port Controller Manager + to provide USB PD and USB Type-C functionalities. + + This driver can also be built as a module. The module + will be called "tcpci_mt6370". + +config TYPEC_TCPCI_MAXIM + tristate "Maxim TCPCI based Type-C chip driver" + help + MAXIM TCPCI based Type-C/PD chip driver. Works with + with Type-C Port Controller Manager. + +endif # TYPEC_TCPCI + +config TYPEC_FUSB302 + tristate "Fairchild FUSB302 Type-C chip driver" + depends on I2C + depends on EXTCON || !EXTCON + help + The Fairchild FUSB302 Type-C chip driver that works with + Type-C Port Controller Manager to provide USB PD and USB + Type-C functionalities. + +config TYPEC_WCOVE + tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver" + depends on ACPI + depends on MFD_INTEL_PMC_BXT + depends on BXT_WC_PMIC_OPREGION + help + This driver adds support for USB Type-C on Intel Broxton platforms + that have Intel Whiskey Cove PMIC. The driver works with USB Type-C + Port Controller Manager to provide USB PD and Type-C functionalities. + + To compile this driver as module, choose M here: the module will be + called typec_wcove.ko + +config TYPEC_QCOM_PMIC + tristate "Qualcomm PMIC USB Type-C Port Controller Manager driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on DRM || DRM=n + help + A Type-C port and Power Delivery driver which aggregates two + discrete pieces of silicon in the PM8150b PMIC block: the + Type-C port controller and the Power Delivery PHY. + + This driver enables Type-C role switching, orientation, Alternate + mode and Power Delivery support both for VBUS and VCONN. + +endif # TYPEC_TCPM diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile new file mode 100644 index 0000000000..7a8cad0c0b --- /dev/null +++ b/drivers/usb/typec/tcpm/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_TYPEC_TCPM) += tcpm.o +obj-$(CONFIG_TYPEC_FUSB302) += fusb302.o +obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o +typec_wcove-y := wcove.o +obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o +obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o +obj-$(CONFIG_TYPEC_MT6360) += tcpci_mt6360.o +obj-$(CONFIG_TYPEC_TCPCI_MT6370) += tcpci_mt6370.o +obj-$(CONFIG_TYPEC_TCPCI_MAXIM) += tcpci_maxim.o +tcpci_maxim-y += tcpci_maxim_core.o maxim_contaminant.o +obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom/ diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c new file mode 100644 index 0000000000..bc21006e97 --- /dev/null +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -0,0 +1,1847 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2016-2017 Google, Inc + * + * Fairchild FUSB302 Type-C Chip Driver + */ + +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/extcon.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/pinctrl/consumer.h> +#include <linux/proc_fs.h> +#include <linux/regulator/consumer.h> +#include <linux/sched/clock.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/usb.h> +#include <linux/usb/typec.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/pd.h> +#include <linux/workqueue.h> + +#include "fusb302_reg.h" + +/* + * When the device is SNK, BC_LVL interrupt is used to monitor cc pins + * for the current capability offered by the SRC. As FUSB302 chip fires + * the BC_LVL interrupt on PD signalings, cc lvl should be handled after + * a delay to avoid measuring on PD activities. The delay is slightly + * longer than PD_T_PD_DEBPUNCE (10-20ms). + */ +#define T_BC_LVL_DEBOUNCE_DELAY_MS 30 + +enum toggling_mode { + TOGGLING_MODE_OFF, + TOGGLING_MODE_DRP, + TOGGLING_MODE_SNK, + TOGGLING_MODE_SRC, +}; + +enum src_current_status { + SRC_CURRENT_DEFAULT, + SRC_CURRENT_MEDIUM, + SRC_CURRENT_HIGH, +}; + +static const u8 ra_mda_value[] = { + [SRC_CURRENT_DEFAULT] = 4, /* 210mV */ + [SRC_CURRENT_MEDIUM] = 9, /* 420mV */ + [SRC_CURRENT_HIGH] = 18, /* 798mV */ +}; + +static const u8 rd_mda_value[] = { + [SRC_CURRENT_DEFAULT] = 38, /* 1638mV */ + [SRC_CURRENT_MEDIUM] = 38, /* 1638mV */ + [SRC_CURRENT_HIGH] = 61, /* 2604mV */ +}; + +#define LOG_BUFFER_ENTRIES 1024 +#define LOG_BUFFER_ENTRY_SIZE 128 + +struct fusb302_chip { + struct device *dev; + struct i2c_client *i2c_client; + struct tcpm_port *tcpm_port; + struct tcpc_dev tcpc_dev; + + struct regulator *vbus; + + spinlock_t irq_lock; + struct work_struct irq_work; + bool irq_suspended; + bool irq_while_suspended; + struct gpio_desc *gpio_int_n; + int gpio_int_n_irq; + struct extcon_dev *extcon; + + struct workqueue_struct *wq; + struct delayed_work bc_lvl_handler; + + /* lock for sharing chip states */ + struct mutex lock; + + /* chip status */ + enum toggling_mode toggling_mode; + enum src_current_status src_current_status; + bool intr_togdone; + bool intr_bc_lvl; + bool intr_comp_chng; + + /* port status */ + bool vconn_on; + bool vbus_on; + bool charge_on; + bool vbus_present; + enum typec_cc_polarity cc_polarity; + enum typec_cc_status cc1; + enum typec_cc_status cc2; + u32 snk_pdo[PDO_MAX_OBJECTS]; + +#ifdef CONFIG_DEBUG_FS + struct dentry *dentry; + /* lock for log buffer access */ + struct mutex logbuffer_lock; + int logbuffer_head; + int logbuffer_tail; + u8 *logbuffer[LOG_BUFFER_ENTRIES]; +#endif +}; + +/* + * Logging + */ + +#ifdef CONFIG_DEBUG_FS +static bool fusb302_log_full(struct fusb302_chip *chip) +{ + return chip->logbuffer_tail == + (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; +} + +__printf(2, 0) +static void _fusb302_log(struct fusb302_chip *chip, const char *fmt, + va_list args) +{ + char tmpbuffer[LOG_BUFFER_ENTRY_SIZE]; + u64 ts_nsec = local_clock(); + unsigned long rem_nsec; + + if (!chip->logbuffer[chip->logbuffer_head]) { + chip->logbuffer[chip->logbuffer_head] = + kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL); + if (!chip->logbuffer[chip->logbuffer_head]) + return; + } + + vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args); + + mutex_lock(&chip->logbuffer_lock); + + if (fusb302_log_full(chip)) { + chip->logbuffer_head = max(chip->logbuffer_head - 1, 0); + strscpy(tmpbuffer, "overflow", sizeof(tmpbuffer)); + } + + if (chip->logbuffer_head < 0 || + chip->logbuffer_head >= LOG_BUFFER_ENTRIES) { + dev_warn(chip->dev, + "Bad log buffer index %d\n", chip->logbuffer_head); + goto abort; + } + + if (!chip->logbuffer[chip->logbuffer_head]) { + dev_warn(chip->dev, + "Log buffer index %d is NULL\n", chip->logbuffer_head); + goto abort; + } + + rem_nsec = do_div(ts_nsec, 1000000000); + scnprintf(chip->logbuffer[chip->logbuffer_head], + LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s", + (unsigned long)ts_nsec, rem_nsec / 1000, + tmpbuffer); + chip->logbuffer_head = (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; + +abort: + mutex_unlock(&chip->logbuffer_lock); +} + +__printf(2, 3) +static void fusb302_log(struct fusb302_chip *chip, const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + _fusb302_log(chip, fmt, args); + va_end(args); +} + +static int fusb302_debug_show(struct seq_file *s, void *v) +{ + struct fusb302_chip *chip = s->private; + int tail; + + mutex_lock(&chip->logbuffer_lock); + tail = chip->logbuffer_tail; + while (tail != chip->logbuffer_head) { + seq_printf(s, "%s\n", chip->logbuffer[tail]); + tail = (tail + 1) % LOG_BUFFER_ENTRIES; + } + if (!seq_has_overflowed(s)) + chip->logbuffer_tail = tail; + mutex_unlock(&chip->logbuffer_lock); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(fusb302_debug); + +static void fusb302_debugfs_init(struct fusb302_chip *chip) +{ + char name[NAME_MAX]; + + mutex_init(&chip->logbuffer_lock); + snprintf(name, NAME_MAX, "fusb302-%s", dev_name(chip->dev)); + chip->dentry = debugfs_create_dir(name, usb_debug_root); + debugfs_create_file("log", S_IFREG | 0444, chip->dentry, chip, + &fusb302_debug_fops); +} + +static void fusb302_debugfs_exit(struct fusb302_chip *chip) +{ + debugfs_remove(chip->dentry); +} + +#else + +static void fusb302_log(const struct fusb302_chip *chip, + const char *fmt, ...) { } +static void fusb302_debugfs_init(const struct fusb302_chip *chip) { } +static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { } + +#endif + +static int fusb302_i2c_write(struct fusb302_chip *chip, + u8 address, u8 data) +{ + int ret = 0; + + ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data); + if (ret < 0) + fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d", + data, address, ret); + + return ret; +} + +static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address, + u8 length, const u8 *data) +{ + int ret = 0; + + if (length <= 0) + return ret; + + ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address, + length, data); + if (ret < 0) + fusb302_log(chip, "cannot block write 0x%02x, len=%d, ret=%d", + address, length, ret); + + return ret; +} + +static int fusb302_i2c_read(struct fusb302_chip *chip, + u8 address, u8 *data) +{ + int ret = 0; + + ret = i2c_smbus_read_byte_data(chip->i2c_client, address); + *data = (u8)ret; + if (ret < 0) + fusb302_log(chip, "cannot read %02x, ret=%d", address, ret); + + return ret; +} + +static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address, + u8 length, u8 *data) +{ + int ret = 0; + + if (length <= 0) + return ret; + + ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address, + length, data); + if (ret < 0) { + fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d", + address, length, ret); + goto done; + } + if (ret != length) { + fusb302_log(chip, "only read %d/%d bytes from 0x%02x", + ret, length, address); + ret = -EIO; + } + +done: + return ret; +} + +static int fusb302_i2c_mask_write(struct fusb302_chip *chip, u8 address, + u8 mask, u8 value) +{ + int ret = 0; + u8 data; + + ret = fusb302_i2c_read(chip, address, &data); + if (ret < 0) + return ret; + data &= ~mask; + data |= value; + ret = fusb302_i2c_write(chip, address, data); + if (ret < 0) + return ret; + + return ret; +} + +static int fusb302_i2c_set_bits(struct fusb302_chip *chip, u8 address, + u8 set_bits) +{ + return fusb302_i2c_mask_write(chip, address, 0x00, set_bits); +} + +static int fusb302_i2c_clear_bits(struct fusb302_chip *chip, u8 address, + u8 clear_bits) +{ + return fusb302_i2c_mask_write(chip, address, clear_bits, 0x00); +} + +static int fusb302_sw_reset(struct fusb302_chip *chip) +{ + int ret = 0; + + ret = fusb302_i2c_write(chip, FUSB_REG_RESET, + FUSB_REG_RESET_SW_RESET); + if (ret < 0) + fusb302_log(chip, "cannot sw reset the chip, ret=%d", ret); + else + fusb302_log(chip, "sw reset"); + + return ret; +} + +static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip, u8 retry_count) +{ + int ret = 0; + + ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, retry_count | + FUSB_REG_CONTROL3_AUTO_RETRY); + + return ret; +} + +/* + * initialize interrupt on the chip + * - unmasked interrupt: VBUS_OK + */ +static int fusb302_init_interrupt(struct fusb302_chip *chip) +{ + int ret = 0; + + ret = fusb302_i2c_write(chip, FUSB_REG_MASK, + 0xFF & ~FUSB_REG_MASK_VBUSOK); + if (ret < 0) + return ret; + ret = fusb302_i2c_write(chip, FUSB_REG_MASKA, 0xFF); + if (ret < 0) + return ret; + ret = fusb302_i2c_write(chip, FUSB_REG_MASKB, 0xFF); + if (ret < 0) + return ret; + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_INT_MASK); + if (ret < 0) + return ret; + + return ret; +} + +static int fusb302_set_power_mode(struct fusb302_chip *chip, u8 power_mode) +{ + int ret = 0; + + ret = fusb302_i2c_write(chip, FUSB_REG_POWER, power_mode); + + return ret; +} + +static int tcpm_init(struct tcpc_dev *dev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + u8 data; + + ret = fusb302_sw_reset(chip); + if (ret < 0) + return ret; + ret = fusb302_enable_tx_auto_retries(chip, FUSB_REG_CONTROL3_N_RETRIES_3); + if (ret < 0) + return ret; + ret = fusb302_init_interrupt(chip); + if (ret < 0) + return ret; + ret = fusb302_set_power_mode(chip, FUSB_REG_POWER_PWR_ALL); + if (ret < 0) + return ret; + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data); + if (ret < 0) + return ret; + chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK); + ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data); + if (ret < 0) + return ret; + fusb302_log(chip, "fusb302 device ID: 0x%02x", data); + + return ret; +} + +static int tcpm_get_vbus(struct tcpc_dev *dev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + ret = chip->vbus_present ? 1 : 0; + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_get_current_limit(struct tcpc_dev *dev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int current_limit = 0; + unsigned long timeout; + + if (!chip->extcon) + return 0; + + /* + * USB2 Charger detection may still be in progress when we get here, + * this can take upto 600ms, wait 800ms max. + */ + timeout = jiffies + msecs_to_jiffies(800); + do { + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_SDP) == 1) + current_limit = 500; + + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_CDP) == 1 || + extcon_get_state(chip->extcon, EXTCON_CHG_USB_ACA) == 1) + current_limit = 1500; + + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_DCP) == 1) + current_limit = 2000; + + msleep(50); + } while (current_limit == 0 && time_before(jiffies, timeout)); + + return current_limit; +} + +static int fusb302_set_src_current(struct fusb302_chip *chip, + enum src_current_status status) +{ + int ret = 0; + + chip->src_current_status = status; + switch (status) { + case SRC_CURRENT_DEFAULT: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_HOST_CUR_MASK, + FUSB_REG_CONTROL0_HOST_CUR_DEF); + break; + case SRC_CURRENT_MEDIUM: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_HOST_CUR_MASK, + FUSB_REG_CONTROL0_HOST_CUR_MED); + break; + case SRC_CURRENT_HIGH: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_HOST_CUR_MASK, + FUSB_REG_CONTROL0_HOST_CUR_HIGH); + break; + default: + break; + } + + return ret; +} + +static int fusb302_set_toggling(struct fusb302_chip *chip, + enum toggling_mode mode) +{ + int ret = 0; + + /* first disable toggling */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_TOGGLE); + if (ret < 0) + return ret; + /* mask interrupts for SRC or SNK */ + ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) + return ret; + chip->intr_bc_lvl = false; + chip->intr_comp_chng = false; + /* configure toggling mode: none/snk/src/drp */ + switch (mode) { + case TOGGLING_MODE_OFF: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_NONE); + if (ret < 0) + return ret; + break; + case TOGGLING_MODE_SNK: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_UFP); + if (ret < 0) + return ret; + break; + case TOGGLING_MODE_SRC: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_DFP); + if (ret < 0) + return ret; + break; + case TOGGLING_MODE_DRP: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_DRP); + if (ret < 0) + return ret; + break; + default: + break; + } + + if (mode == TOGGLING_MODE_OFF) { + /* mask TOGDONE interrupt */ + ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, + FUSB_REG_MASKA_TOGDONE); + if (ret < 0) + return ret; + chip->intr_togdone = false; + } else { + /* Datasheet says vconn MUST be off when toggling */ + WARN(chip->vconn_on, "Vconn is on during toggle start"); + /* unmask TOGDONE interrupt */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, + FUSB_REG_MASKA_TOGDONE); + if (ret < 0) + return ret; + chip->intr_togdone = true; + /* start toggling */ + ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_TOGGLE); + if (ret < 0) + return ret; + /* during toggling, consider cc as Open */ + chip->cc1 = TYPEC_CC_OPEN; + chip->cc2 = TYPEC_CC_OPEN; + } + chip->toggling_mode = mode; + + return ret; +} + +static const char * const typec_cc_status_name[] = { + [TYPEC_CC_OPEN] = "Open", + [TYPEC_CC_RA] = "Ra", + [TYPEC_CC_RD] = "Rd", + [TYPEC_CC_RP_DEF] = "Rp-def", + [TYPEC_CC_RP_1_5] = "Rp-1.5", + [TYPEC_CC_RP_3_0] = "Rp-3.0", +}; + +static const enum src_current_status cc_src_current[] = { + [TYPEC_CC_OPEN] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RA] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RD] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RP_DEF] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RP_1_5] = SRC_CURRENT_MEDIUM, + [TYPEC_CC_RP_3_0] = SRC_CURRENT_HIGH, +}; + +static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + u8 switches0_mask = FUSB_REG_SWITCHES0_CC1_PU_EN | + FUSB_REG_SWITCHES0_CC2_PU_EN | + FUSB_REG_SWITCHES0_CC1_PD_EN | + FUSB_REG_SWITCHES0_CC2_PD_EN; + u8 rd_mda, switches0_data = 0x00; + int ret = 0; + + mutex_lock(&chip->lock); + switch (cc) { + case TYPEC_CC_OPEN: + break; + case TYPEC_CC_RD: + switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN | + FUSB_REG_SWITCHES0_CC2_PD_EN; + break; + case TYPEC_CC_RP_DEF: + case TYPEC_CC_RP_1_5: + case TYPEC_CC_RP_3_0: + switches0_data |= (chip->cc_polarity == TYPEC_POLARITY_CC1) ? + FUSB_REG_SWITCHES0_CC1_PU_EN : + FUSB_REG_SWITCHES0_CC2_PU_EN; + break; + default: + fusb302_log(chip, "unsupported cc value %s", + typec_cc_status_name[cc]); + ret = -EINVAL; + goto done; + } + + fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]); + + ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, "cannot set toggling mode, ret=%d", ret); + goto done; + } + + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0, + switches0_mask, switches0_data); + if (ret < 0) { + fusb302_log(chip, "cannot set pull-up/-down, ret = %d", ret); + goto done; + } + /* reset the cc status */ + chip->cc1 = TYPEC_CC_OPEN; + chip->cc2 = TYPEC_CC_OPEN; + + /* adjust current for SRC */ + ret = fusb302_set_src_current(chip, cc_src_current[cc]); + if (ret < 0) { + fusb302_log(chip, "cannot set src current %s, ret=%d", + typec_cc_status_name[cc], ret); + goto done; + } + + /* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */ + switch (cc) { + case TYPEC_CC_RP_DEF: + case TYPEC_CC_RP_1_5: + case TYPEC_CC_RP_3_0: + rd_mda = rd_mda_value[cc_src_current[cc]]; + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) { + fusb302_log(chip, + "cannot set SRC measure value, ret=%d", + ret); + goto done; + } + ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG, + FUSB_REG_MASK_BC_LVL); + if (ret < 0) { + fusb302_log(chip, "cannot set SRC interrupt, ret=%d", + ret); + goto done; + } + chip->intr_comp_chng = true; + chip->intr_bc_lvl = false; + break; + case TYPEC_CC_RD: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG, + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) { + fusb302_log(chip, "cannot set SRC interrupt, ret=%d", + ret); + goto done; + } + chip->intr_bc_lvl = true; + chip->intr_comp_chng = false; + break; + default: + break; + } +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_get_cc(struct tcpc_dev *dev, enum typec_cc_status *cc1, + enum typec_cc_status *cc2) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + + mutex_lock(&chip->lock); + *cc1 = chip->cc1; + *cc2 = chip->cc2; + fusb302_log(chip, "cc1=%s, cc2=%s", typec_cc_status_name[*cc1], + typec_cc_status_name[*cc2]); + mutex_unlock(&chip->lock); + + return 0; +} + +static int tcpm_set_polarity(struct tcpc_dev *dev, + enum typec_cc_polarity polarity) +{ + return 0; +} + +static int tcpm_set_vconn(struct tcpc_dev *dev, bool on) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + u8 switches0_data = 0x00; + u8 switches0_mask = FUSB_REG_SWITCHES0_VCONN_CC1 | + FUSB_REG_SWITCHES0_VCONN_CC2; + + mutex_lock(&chip->lock); + if (chip->vconn_on == on) { + fusb302_log(chip, "vconn is already %s", on ? "On" : "Off"); + goto done; + } + if (on) { + switches0_data = (chip->cc_polarity == TYPEC_POLARITY_CC1) ? + FUSB_REG_SWITCHES0_VCONN_CC2 : + FUSB_REG_SWITCHES0_VCONN_CC1; + } + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0, + switches0_mask, switches0_data); + if (ret < 0) + goto done; + chip->vconn_on = on; + fusb302_log(chip, "vconn := %s", on ? "On" : "Off"); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + if (chip->vbus_on == on) { + fusb302_log(chip, "vbus is already %s", on ? "On" : "Off"); + } else { + if (on) + ret = regulator_enable(chip->vbus); + else + ret = regulator_disable(chip->vbus); + if (ret < 0) { + fusb302_log(chip, "cannot %s vbus regulator, ret=%d", + on ? "enable" : "disable", ret); + goto done; + } + chip->vbus_on = on; + fusb302_log(chip, "vbus := %s", on ? "On" : "Off"); + } + if (chip->charge_on == charge) + fusb302_log(chip, "charge is already %s", + charge ? "On" : "Off"); + else + chip->charge_on = charge; + +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int fusb302_pd_tx_flush(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_TX_FLUSH); +} + +static int fusb302_pd_rx_flush(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL1, + FUSB_REG_CONTROL1_RX_FLUSH); +} + +static int fusb302_pd_set_auto_goodcrc(struct fusb302_chip *chip, bool on) +{ + if (on) + return fusb302_i2c_set_bits(chip, FUSB_REG_SWITCHES1, + FUSB_REG_SWITCHES1_AUTO_GCRC); + return fusb302_i2c_clear_bits(chip, FUSB_REG_SWITCHES1, + FUSB_REG_SWITCHES1_AUTO_GCRC); +} + +static int fusb302_pd_set_interrupts(struct fusb302_chip *chip, bool on) +{ + int ret = 0; + u8 mask_interrupts = FUSB_REG_MASK_COLLISION; + u8 maska_interrupts = FUSB_REG_MASKA_RETRYFAIL | + FUSB_REG_MASKA_HARDSENT | + FUSB_REG_MASKA_TX_SUCCESS | + FUSB_REG_MASKA_HARDRESET; + u8 maskb_interrupts = FUSB_REG_MASKB_GCRCSENT; + + ret = on ? + fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, mask_interrupts) : + fusb302_i2c_set_bits(chip, FUSB_REG_MASK, mask_interrupts); + if (ret < 0) + return ret; + ret = on ? + fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, maska_interrupts) : + fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, maska_interrupts); + if (ret < 0) + return ret; + ret = on ? + fusb302_i2c_clear_bits(chip, FUSB_REG_MASKB, maskb_interrupts) : + fusb302_i2c_set_bits(chip, FUSB_REG_MASKB, maskb_interrupts); + return ret; +} + +static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + ret = fusb302_pd_rx_flush(chip); + if (ret < 0) { + fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret); + goto done; + } + ret = fusb302_pd_tx_flush(chip); + if (ret < 0) { + fusb302_log(chip, "cannot flush pd tx buffer, ret=%d", ret); + goto done; + } + ret = fusb302_pd_set_auto_goodcrc(chip, on); + if (ret < 0) { + fusb302_log(chip, "cannot turn %s auto GCRC, ret=%d", + on ? "on" : "off", ret); + goto done; + } + ret = fusb302_pd_set_interrupts(chip, on); + if (ret < 0) { + fusb302_log(chip, "cannot turn %s pd interrupts, ret=%d", + on ? "on" : "off", ret); + goto done; + } + fusb302_log(chip, "pd := %s", on ? "on" : "off"); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static const char * const typec_role_name[] = { + [TYPEC_SINK] = "Sink", + [TYPEC_SOURCE] = "Source", +}; + +static const char * const typec_data_role_name[] = { + [TYPEC_DEVICE] = "Device", + [TYPEC_HOST] = "Host", +}; + +static int tcpm_set_roles(struct tcpc_dev *dev, bool attached, + enum typec_role pwr, enum typec_data_role data) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + u8 switches1_mask = FUSB_REG_SWITCHES1_POWERROLE | + FUSB_REG_SWITCHES1_DATAROLE; + u8 switches1_data = 0x00; + + mutex_lock(&chip->lock); + if (pwr == TYPEC_SOURCE) + switches1_data |= FUSB_REG_SWITCHES1_POWERROLE; + if (data == TYPEC_HOST) + switches1_data |= FUSB_REG_SWITCHES1_DATAROLE; + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1, + switches1_mask, switches1_data); + if (ret < 0) { + fusb302_log(chip, "unable to set pd header %s, %s, ret=%d", + typec_role_name[pwr], typec_data_role_name[data], + ret); + goto done; + } + fusb302_log(chip, "pd header := %s, %s", typec_role_name[pwr], + typec_data_role_name[data]); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_start_toggling(struct tcpc_dev *dev, + enum typec_port_type port_type, + enum typec_cc_status cc) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + enum toggling_mode mode = TOGGLING_MODE_OFF; + int ret = 0; + + switch (port_type) { + case TYPEC_PORT_SRC: + mode = TOGGLING_MODE_SRC; + break; + case TYPEC_PORT_SNK: + mode = TOGGLING_MODE_SNK; + break; + case TYPEC_PORT_DRP: + mode = TOGGLING_MODE_DRP; + break; + } + + mutex_lock(&chip->lock); + ret = fusb302_set_src_current(chip, cc_src_current[cc]); + if (ret < 0) { + fusb302_log(chip, "unable to set src current %s, ret=%d", + typec_cc_status_name[cc], ret); + goto done; + } + ret = fusb302_set_toggling(chip, mode); + if (ret < 0) { + fusb302_log(chip, + "unable to start drp toggling, ret=%d", ret); + goto done; + } + fusb302_log(chip, "start drp toggling"); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int fusb302_pd_send_message(struct fusb302_chip *chip, + const struct pd_message *msg) +{ + int ret = 0; + u8 buf[40]; + u8 pos = 0; + int len; + + /* SOP tokens */ + buf[pos++] = FUSB302_TKN_SYNC1; + buf[pos++] = FUSB302_TKN_SYNC1; + buf[pos++] = FUSB302_TKN_SYNC1; + buf[pos++] = FUSB302_TKN_SYNC2; + + len = pd_header_cnt_le(msg->header) * 4; + /* plug 2 for header */ + len += 2; + if (len > 0x1F) { + fusb302_log(chip, + "PD message too long %d (incl. header)", len); + return -EINVAL; + } + /* packsym tells the FUSB302 chip that the next X bytes are payload */ + buf[pos++] = FUSB302_TKN_PACKSYM | (len & 0x1F); + memcpy(&buf[pos], &msg->header, sizeof(msg->header)); + pos += sizeof(msg->header); + + len -= 2; + memcpy(&buf[pos], msg->payload, len); + pos += len; + + /* CRC */ + buf[pos++] = FUSB302_TKN_JAMCRC; + /* EOP */ + buf[pos++] = FUSB302_TKN_EOP; + /* turn tx off after sending message */ + buf[pos++] = FUSB302_TKN_TXOFF; + /* start transmission */ + buf[pos++] = FUSB302_TKN_TXON; + + ret = fusb302_i2c_block_write(chip, FUSB_REG_FIFOS, pos, buf); + if (ret < 0) + return ret; + fusb302_log(chip, "sending PD message header: %x", msg->header); + fusb302_log(chip, "sending PD message len: %d", len); + + return ret; +} + +static int fusb302_pd_send_hardreset(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, + FUSB_REG_CONTROL3_SEND_HARDRESET); +} + +static const char * const transmit_type_name[] = { + [TCPC_TX_SOP] = "SOP", + [TCPC_TX_SOP_PRIME] = "SOP'", + [TCPC_TX_SOP_PRIME_PRIME] = "SOP''", + [TCPC_TX_SOP_DEBUG_PRIME] = "DEBUG'", + [TCPC_TX_SOP_DEBUG_PRIME_PRIME] = "DEBUG''", + [TCPC_TX_HARD_RESET] = "HARD_RESET", + [TCPC_TX_CABLE_RESET] = "CABLE_RESET", + [TCPC_TX_BIST_MODE_2] = "BIST_MODE_2", +}; + +static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type, + const struct pd_message *msg, unsigned int negotiated_rev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + switch (type) { + case TCPC_TX_SOP: + /* nRetryCount 3 in P2.0 spec, whereas 2 in PD3.0 spec */ + ret = fusb302_enable_tx_auto_retries(chip, negotiated_rev > PD_REV20 ? + FUSB_REG_CONTROL3_N_RETRIES_2 : + FUSB_REG_CONTROL3_N_RETRIES_3); + if (ret < 0) + fusb302_log(chip, "Cannot update retry count ret=%d", ret); + + ret = fusb302_pd_send_message(chip, msg); + if (ret < 0) + fusb302_log(chip, + "cannot send PD message, ret=%d", ret); + break; + case TCPC_TX_HARD_RESET: + ret = fusb302_pd_send_hardreset(chip); + if (ret < 0) + fusb302_log(chip, + "cannot send hardreset, ret=%d", ret); + break; + default: + fusb302_log(chip, "type %s not supported", + transmit_type_name[type]); + ret = -EINVAL; + } + mutex_unlock(&chip->lock); + + return ret; +} + +static enum typec_cc_status fusb302_bc_lvl_to_cc(u8 bc_lvl) +{ + if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_1230_MAX) + return TYPEC_CC_RP_3_0; + if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_600_1230) + return TYPEC_CC_RP_1_5; + if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_200_600) + return TYPEC_CC_RP_DEF; + return TYPEC_CC_OPEN; +} + +static void fusb302_bc_lvl_handler_work(struct work_struct *work) +{ + struct fusb302_chip *chip = container_of(work, struct fusb302_chip, + bc_lvl_handler.work); + int ret = 0; + u8 status0; + u8 bc_lvl; + enum typec_cc_status cc_status; + + mutex_lock(&chip->lock); + if (!chip->intr_bc_lvl) { + fusb302_log(chip, "BC_LVL interrupt is turned off, abort"); + goto done; + } + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + goto done; + fusb302_log(chip, "BC_LVL handler, status0=0x%02x", status0); + if (status0 & FUSB_REG_STATUS0_ACTIVITY) { + fusb302_log(chip, "CC activities detected, delay handling"); + mod_delayed_work(chip->wq, &chip->bc_lvl_handler, + msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS)); + goto done; + } + bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK; + cc_status = fusb302_bc_lvl_to_cc(bc_lvl); + if (chip->cc_polarity == TYPEC_POLARITY_CC1) { + if (chip->cc1 != cc_status) { + fusb302_log(chip, "cc1: %s -> %s", + typec_cc_status_name[chip->cc1], + typec_cc_status_name[cc_status]); + chip->cc1 = cc_status; + tcpm_cc_change(chip->tcpm_port); + } + } else { + if (chip->cc2 != cc_status) { + fusb302_log(chip, "cc2: %s -> %s", + typec_cc_status_name[chip->cc2], + typec_cc_status_name[cc_status]); + chip->cc2 = cc_status; + tcpm_cc_change(chip->tcpm_port); + } + } + +done: + mutex_unlock(&chip->lock); +} + +static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev) +{ + fusb302_tcpc_dev->init = tcpm_init; + fusb302_tcpc_dev->get_vbus = tcpm_get_vbus; + fusb302_tcpc_dev->get_current_limit = tcpm_get_current_limit; + fusb302_tcpc_dev->set_cc = tcpm_set_cc; + fusb302_tcpc_dev->get_cc = tcpm_get_cc; + fusb302_tcpc_dev->set_polarity = tcpm_set_polarity; + fusb302_tcpc_dev->set_vconn = tcpm_set_vconn; + fusb302_tcpc_dev->set_vbus = tcpm_set_vbus; + fusb302_tcpc_dev->set_pd_rx = tcpm_set_pd_rx; + fusb302_tcpc_dev->set_roles = tcpm_set_roles; + fusb302_tcpc_dev->start_toggling = tcpm_start_toggling; + fusb302_tcpc_dev->pd_transmit = tcpm_pd_transmit; +} + +static const char * const cc_polarity_name[] = { + [TYPEC_POLARITY_CC1] = "Polarity_CC1", + [TYPEC_POLARITY_CC2] = "Polarity_CC2", +}; + +static int fusb302_set_cc_polarity_and_pull(struct fusb302_chip *chip, + enum typec_cc_polarity cc_polarity, + bool pull_up, bool pull_down) +{ + int ret = 0; + u8 switches0_data = 0x00; + u8 switches1_mask = FUSB_REG_SWITCHES1_TXCC1_EN | + FUSB_REG_SWITCHES1_TXCC2_EN; + u8 switches1_data = 0x00; + + if (pull_down) + switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN | + FUSB_REG_SWITCHES0_CC2_PD_EN; + + if (cc_polarity == TYPEC_POLARITY_CC1) { + switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC1; + if (chip->vconn_on) + switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC2; + if (pull_up) + switches0_data |= FUSB_REG_SWITCHES0_CC1_PU_EN; + switches1_data = FUSB_REG_SWITCHES1_TXCC1_EN; + } else { + switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC2; + if (chip->vconn_on) + switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC1; + if (pull_up) + switches0_data |= FUSB_REG_SWITCHES0_CC2_PU_EN; + switches1_data = FUSB_REG_SWITCHES1_TXCC2_EN; + } + ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data); + if (ret < 0) + return ret; + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1, + switches1_mask, switches1_data); + if (ret < 0) + return ret; + chip->cc_polarity = cc_polarity; + + return ret; +} + +static int fusb302_handle_togdone_snk(struct fusb302_chip *chip, + u8 togdone_result) +{ + int ret = 0; + u8 status0; + u8 bc_lvl; + enum typec_cc_polarity cc_polarity; + enum typec_cc_status cc_status_active, cc1, cc2; + + /* set polarity and pull_up, pull_down */ + cc_polarity = (togdone_result == FUSB_REG_STATUS1A_TOGSS_SNK1) ? + TYPEC_POLARITY_CC1 : TYPEC_POLARITY_CC2; + ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, false, true); + if (ret < 0) { + fusb302_log(chip, "cannot set cc polarity %s, ret=%d", + cc_polarity_name[cc_polarity], ret); + return ret; + } + /* fusb302_set_cc_polarity() has set the correct measure block */ + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + return ret; + bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK; + cc_status_active = fusb302_bc_lvl_to_cc(bc_lvl); + /* restart toggling if the cc status on the active line is OPEN */ + if (cc_status_active == TYPEC_CC_OPEN) { + fusb302_log(chip, "restart toggling as CC_OPEN detected"); + ret = fusb302_set_toggling(chip, chip->toggling_mode); + return ret; + } + /* update tcpm with the new cc value */ + cc1 = (cc_polarity == TYPEC_POLARITY_CC1) ? + cc_status_active : TYPEC_CC_OPEN; + cc2 = (cc_polarity == TYPEC_POLARITY_CC2) ? + cc_status_active : TYPEC_CC_OPEN; + if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) { + chip->cc1 = cc1; + chip->cc2 = cc2; + tcpm_cc_change(chip->tcpm_port); + } + /* turn off toggling */ + ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, + "cannot set toggling mode off, ret=%d", ret); + return ret; + } + /* unmask bc_lvl interrupt */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL); + if (ret < 0) { + fusb302_log(chip, + "cannot unmask bc_lcl interrupt, ret=%d", ret); + return ret; + } + chip->intr_bc_lvl = true; + fusb302_log(chip, "detected cc1=%s, cc2=%s", + typec_cc_status_name[cc1], + typec_cc_status_name[cc2]); + + return ret; +} + +/* On error returns < 0, otherwise a typec_cc_status value */ +static int fusb302_get_src_cc_status(struct fusb302_chip *chip, + enum typec_cc_polarity cc_polarity, + enum typec_cc_status *cc) +{ + u8 ra_mda = ra_mda_value[chip->src_current_status]; + u8 rd_mda = rd_mda_value[chip->src_current_status]; + u8 switches0_data, status0; + int ret; + + /* Step 1: Set switches so that we measure the right CC pin */ + switches0_data = (cc_polarity == TYPEC_POLARITY_CC1) ? + FUSB_REG_SWITCHES0_CC1_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC1 : + FUSB_REG_SWITCHES0_CC2_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC2; + ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data); + if (ret < 0) + return ret; + + fusb302_i2c_read(chip, FUSB_REG_SWITCHES0, &status0); + fusb302_log(chip, "get_src_cc_status switches: 0x%0x", status0); + + /* Step 2: Set compararator volt to differentiate between Open and Rd */ + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) + return ret; + + usleep_range(50, 100); + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + return ret; + + fusb302_log(chip, "get_src_cc_status rd_mda status0: 0x%0x", status0); + if (status0 & FUSB_REG_STATUS0_COMP) { + *cc = TYPEC_CC_OPEN; + return 0; + } + + /* Step 3: Set compararator input to differentiate between Rd and Ra. */ + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, ra_mda); + if (ret < 0) + return ret; + + usleep_range(50, 100); + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + return ret; + + fusb302_log(chip, "get_src_cc_status ra_mda status0: 0x%0x", status0); + if (status0 & FUSB_REG_STATUS0_COMP) + *cc = TYPEC_CC_RD; + else + *cc = TYPEC_CC_RA; + + return 0; +} + +static int fusb302_handle_togdone_src(struct fusb302_chip *chip, + u8 togdone_result) +{ + /* + * - set polarity (measure cc, vconn, tx) + * - set pull_up, pull_down + * - set cc1, cc2, and update to tcpm_port + * - set I_COMP interrupt on + */ + int ret = 0; + u8 rd_mda = rd_mda_value[chip->src_current_status]; + enum toggling_mode toggling_mode = chip->toggling_mode; + enum typec_cc_polarity cc_polarity; + enum typec_cc_status cc1, cc2; + + /* + * The toggle-engine will stop in a src state if it sees either Ra or + * Rd. Determine the status for both CC pins, starting with the one + * where toggling stopped, as that is where the switches point now. + */ + if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1) + ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1); + else + ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2); + if (ret < 0) + return ret; + /* we must turn off toggling before we can measure the other pin */ + ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, "cannot set toggling mode off, ret=%d", ret); + return ret; + } + /* get the status of the other pin */ + if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1) + ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2); + else + ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1); + if (ret < 0) + return ret; + + /* determine polarity based on the status of both pins */ + if (cc1 == TYPEC_CC_RD && + (cc2 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_RA)) { + cc_polarity = TYPEC_POLARITY_CC1; + } else if (cc2 == TYPEC_CC_RD && + (cc1 == TYPEC_CC_OPEN || cc1 == TYPEC_CC_RA)) { + cc_polarity = TYPEC_POLARITY_CC2; + } else { + fusb302_log(chip, "unexpected CC status cc1=%s, cc2=%s, restarting toggling", + typec_cc_status_name[cc1], + typec_cc_status_name[cc2]); + return fusb302_set_toggling(chip, toggling_mode); + } + /* set polarity and pull_up, pull_down */ + ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, true, false); + if (ret < 0) { + fusb302_log(chip, "cannot set cc polarity %s, ret=%d", + cc_polarity_name[cc_polarity], ret); + return ret; + } + /* update tcpm with the new cc value */ + if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) { + chip->cc1 = cc1; + chip->cc2 = cc2; + tcpm_cc_change(chip->tcpm_port); + } + /* set MDAC to Rd threshold, and unmask I_COMP for unplug detection */ + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) + return ret; + /* unmask comp_chng interrupt */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) { + fusb302_log(chip, + "cannot unmask comp_chng interrupt, ret=%d", ret); + return ret; + } + chip->intr_comp_chng = true; + fusb302_log(chip, "detected cc1=%s, cc2=%s", + typec_cc_status_name[cc1], + typec_cc_status_name[cc2]); + + return ret; +} + +static int fusb302_handle_togdone(struct fusb302_chip *chip) +{ + int ret = 0; + u8 status1a; + u8 togdone_result; + + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS1A, &status1a); + if (ret < 0) + return ret; + togdone_result = (status1a >> FUSB_REG_STATUS1A_TOGSS_POS) & + FUSB_REG_STATUS1A_TOGSS_MASK; + switch (togdone_result) { + case FUSB_REG_STATUS1A_TOGSS_SNK1: + case FUSB_REG_STATUS1A_TOGSS_SNK2: + return fusb302_handle_togdone_snk(chip, togdone_result); + case FUSB_REG_STATUS1A_TOGSS_SRC1: + case FUSB_REG_STATUS1A_TOGSS_SRC2: + return fusb302_handle_togdone_src(chip, togdone_result); + case FUSB_REG_STATUS1A_TOGSS_AA: + /* doesn't support */ + fusb302_log(chip, "AudioAccessory not supported"); + fusb302_set_toggling(chip, chip->toggling_mode); + break; + default: + fusb302_log(chip, "TOGDONE with an invalid state: %d", + togdone_result); + fusb302_set_toggling(chip, chip->toggling_mode); + break; + } + return ret; +} + +static int fusb302_pd_reset(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_RESET, + FUSB_REG_RESET_PD_RESET); +} + +static int fusb302_pd_read_message(struct fusb302_chip *chip, + struct pd_message *msg) +{ + int ret = 0; + u8 token; + u8 crc[4]; + int len; + + /* first SOP token */ + ret = fusb302_i2c_read(chip, FUSB_REG_FIFOS, &token); + if (ret < 0) + return ret; + ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 2, + (u8 *)&msg->header); + if (ret < 0) + return ret; + len = pd_header_cnt_le(msg->header) * 4; + /* add 4 to length to include the CRC */ + if (len > PD_MAX_PAYLOAD * 4) { + fusb302_log(chip, "PD message too long %d", len); + return -EINVAL; + } + if (len > 0) { + ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, len, + (u8 *)msg->payload); + if (ret < 0) + return ret; + } + /* another 4 bytes to read CRC out */ + ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 4, crc); + if (ret < 0) + return ret; + fusb302_log(chip, "PD message header: %x", msg->header); + fusb302_log(chip, "PD message len: %d", len); + + /* + * Check if we've read off a GoodCRC message. If so then indicate to + * TCPM that the previous transmission has completed. Otherwise we pass + * the received message over to TCPM for processing. + * + * We make this check here instead of basing the reporting decision on + * the IRQ event type, as it's possible for the chip to report the + * TX_SUCCESS and GCRCSENT events out of order on occasion, so we need + * to check the message type to ensure correct reporting to TCPM. + */ + if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC)) + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS); + else + tcpm_pd_receive(chip->tcpm_port, msg); + + return ret; +} + +static irqreturn_t fusb302_irq_intn(int irq, void *dev_id) +{ + struct fusb302_chip *chip = dev_id; + unsigned long flags; + + /* Disable our level triggered IRQ until our irq_work has cleared it */ + disable_irq_nosync(chip->gpio_int_n_irq); + + spin_lock_irqsave(&chip->irq_lock, flags); + if (chip->irq_suspended) + chip->irq_while_suspended = true; + else + schedule_work(&chip->irq_work); + spin_unlock_irqrestore(&chip->irq_lock, flags); + + return IRQ_HANDLED; +} + +static void fusb302_irq_work(struct work_struct *work) +{ + struct fusb302_chip *chip = container_of(work, struct fusb302_chip, + irq_work); + int ret = 0; + u8 interrupt; + u8 interrupta; + u8 interruptb; + u8 status0; + bool vbus_present; + bool comp_result; + bool intr_togdone; + bool intr_bc_lvl; + bool intr_comp_chng; + struct pd_message pd_msg; + + mutex_lock(&chip->lock); + /* grab a snapshot of intr flags */ + intr_togdone = chip->intr_togdone; + intr_bc_lvl = chip->intr_bc_lvl; + intr_comp_chng = chip->intr_comp_chng; + + ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, &interrupt); + if (ret < 0) + goto done; + ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTA, &interrupta); + if (ret < 0) + goto done; + ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTB, &interruptb); + if (ret < 0) + goto done; + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + goto done; + fusb302_log(chip, + "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x", + interrupt, interrupta, interruptb, status0); + + if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) { + vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK); + fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s", + vbus_present ? "On" : "Off"); + if (vbus_present != chip->vbus_present) { + chip->vbus_present = vbus_present; + tcpm_vbus_change(chip->tcpm_port); + } + } + + if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) { + fusb302_log(chip, "IRQ: TOGDONE"); + ret = fusb302_handle_togdone(chip); + if (ret < 0) { + fusb302_log(chip, + "handle togdone error, ret=%d", ret); + goto done; + } + } + + if ((interrupt & FUSB_REG_INTERRUPT_BC_LVL) && intr_bc_lvl) { + fusb302_log(chip, "IRQ: BC_LVL, handler pending"); + /* + * as BC_LVL interrupt can be affected by PD activity, + * apply delay to for the handler to wait for the PD + * signaling to finish. + */ + mod_delayed_work(chip->wq, &chip->bc_lvl_handler, + msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS)); + } + + if ((interrupt & FUSB_REG_INTERRUPT_COMP_CHNG) && intr_comp_chng) { + comp_result = !!(status0 & FUSB_REG_STATUS0_COMP); + fusb302_log(chip, "IRQ: COMP_CHNG, comp=%s", + comp_result ? "true" : "false"); + if (comp_result) { + /* cc level > Rd_threshold, detach */ + chip->cc1 = TYPEC_CC_OPEN; + chip->cc2 = TYPEC_CC_OPEN; + tcpm_cc_change(chip->tcpm_port); + } + } + + if (interrupt & FUSB_REG_INTERRUPT_COLLISION) { + fusb302_log(chip, "IRQ: PD collision"); + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED); + } + + if (interrupta & FUSB_REG_INTERRUPTA_RETRYFAIL) { + fusb302_log(chip, "IRQ: PD retry failed"); + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED); + } + + if (interrupta & FUSB_REG_INTERRUPTA_HARDSENT) { + fusb302_log(chip, "IRQ: PD hardreset sent"); + ret = fusb302_pd_reset(chip); + if (ret < 0) { + fusb302_log(chip, "cannot PD reset, ret=%d", ret); + goto done; + } + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS); + } + + if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) { + fusb302_log(chip, "IRQ: PD tx success"); + ret = fusb302_pd_read_message(chip, &pd_msg); + if (ret < 0) { + fusb302_log(chip, + "cannot read in PD message, ret=%d", ret); + goto done; + } + } + + if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) { + fusb302_log(chip, "IRQ: PD received hardreset"); + ret = fusb302_pd_reset(chip); + if (ret < 0) { + fusb302_log(chip, "cannot PD reset, ret=%d", ret); + goto done; + } + tcpm_pd_hard_reset(chip->tcpm_port); + } + + if (interruptb & FUSB_REG_INTERRUPTB_GCRCSENT) { + fusb302_log(chip, "IRQ: PD sent good CRC"); + ret = fusb302_pd_read_message(chip, &pd_msg); + if (ret < 0) { + fusb302_log(chip, + "cannot read in PD message, ret=%d", ret); + goto done; + } + } +done: + mutex_unlock(&chip->lock); + enable_irq(chip->gpio_int_n_irq); +} + +static int init_gpio(struct fusb302_chip *chip) +{ + struct device *dev = chip->dev; + int ret = 0; + + chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN); + if (IS_ERR(chip->gpio_int_n)) { + dev_err(dev, "failed to request gpio_int_n\n"); + return PTR_ERR(chip->gpio_int_n); + } + ret = gpiod_to_irq(chip->gpio_int_n); + if (ret < 0) { + dev_err(dev, + "cannot request IRQ for GPIO Int_N, ret=%d", ret); + return ret; + } + chip->gpio_int_n_irq = ret; + return 0; +} + +#define PDO_FIXED_FLAGS \ + (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM) + +static const u32 src_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS) +}; + +static const u32 snk_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS) +}; + +static const struct property_entry port_props[] = { + PROPERTY_ENTRY_STRING("data-role", "dual"), + PROPERTY_ENTRY_STRING("power-role", "dual"), + PROPERTY_ENTRY_STRING("try-power-role", "sink"), + PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), + PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), + PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000), + { } +}; + +static struct fwnode_handle *fusb302_fwnode_get(struct device *dev) +{ + struct fwnode_handle *fwnode; + + fwnode = device_get_named_child_node(dev, "connector"); + if (!fwnode) + fwnode = fwnode_create_software_node(port_props, NULL); + + return fwnode; +} + +static int fusb302_probe(struct i2c_client *client) +{ + struct fusb302_chip *chip; + struct i2c_adapter *adapter = client->adapter; + struct device *dev = &client->dev; + const char *name; + int ret = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + dev_err(&client->dev, + "I2C/SMBus block functionality not supported!\n"); + return -ENODEV; + } + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->i2c_client = client; + chip->dev = &client->dev; + mutex_init(&chip->lock); + + /* + * Devicetree platforms should get extcon via phandle (not yet + * supported). On ACPI platforms, we get the name from a device prop. + * This device prop is for kernel internal use only and is expected + * to be set by the platform code which also registers the i2c client + * for the fusb302. + */ + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { + chip->extcon = extcon_get_extcon_dev(name); + if (IS_ERR(chip->extcon)) + return PTR_ERR(chip->extcon); + } + + chip->vbus = devm_regulator_get(chip->dev, "vbus"); + if (IS_ERR(chip->vbus)) + return PTR_ERR(chip->vbus); + + chip->wq = create_singlethread_workqueue(dev_name(chip->dev)); + if (!chip->wq) + return -ENOMEM; + + spin_lock_init(&chip->irq_lock); + INIT_WORK(&chip->irq_work, fusb302_irq_work); + INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work); + init_tcpc_dev(&chip->tcpc_dev); + fusb302_debugfs_init(chip); + + if (client->irq) { + chip->gpio_int_n_irq = client->irq; + } else { + ret = init_gpio(chip); + if (ret < 0) + goto destroy_workqueue; + } + + chip->tcpc_dev.fwnode = fusb302_fwnode_get(dev); + if (IS_ERR(chip->tcpc_dev.fwnode)) { + ret = PTR_ERR(chip->tcpc_dev.fwnode); + goto destroy_workqueue; + } + + chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev); + if (IS_ERR(chip->tcpm_port)) { + fwnode_handle_put(chip->tcpc_dev.fwnode); + ret = dev_err_probe(dev, PTR_ERR(chip->tcpm_port), + "cannot register tcpm port\n"); + goto destroy_workqueue; + } + + ret = request_irq(chip->gpio_int_n_irq, fusb302_irq_intn, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + "fsc_interrupt_int_n", chip); + if (ret < 0) { + dev_err(dev, "cannot request IRQ for GPIO Int_N, ret=%d", ret); + goto tcpm_unregister_port; + } + enable_irq_wake(chip->gpio_int_n_irq); + i2c_set_clientdata(client, chip); + + return ret; + +tcpm_unregister_port: + tcpm_unregister_port(chip->tcpm_port); + fwnode_handle_put(chip->tcpc_dev.fwnode); +destroy_workqueue: + fusb302_debugfs_exit(chip); + destroy_workqueue(chip->wq); + + return ret; +} + +static void fusb302_remove(struct i2c_client *client) +{ + struct fusb302_chip *chip = i2c_get_clientdata(client); + + disable_irq_wake(chip->gpio_int_n_irq); + free_irq(chip->gpio_int_n_irq, chip); + cancel_work_sync(&chip->irq_work); + cancel_delayed_work_sync(&chip->bc_lvl_handler); + tcpm_unregister_port(chip->tcpm_port); + fwnode_handle_put(chip->tcpc_dev.fwnode); + destroy_workqueue(chip->wq); + fusb302_debugfs_exit(chip); +} + +static int fusb302_pm_suspend(struct device *dev) +{ + struct fusb302_chip *chip = dev->driver_data; + unsigned long flags; + + spin_lock_irqsave(&chip->irq_lock, flags); + chip->irq_suspended = true; + spin_unlock_irqrestore(&chip->irq_lock, flags); + + /* Make sure any pending irq_work is finished before the bus suspends */ + flush_work(&chip->irq_work); + return 0; +} + +static int fusb302_pm_resume(struct device *dev) +{ + struct fusb302_chip *chip = dev->driver_data; + unsigned long flags; + + spin_lock_irqsave(&chip->irq_lock, flags); + if (chip->irq_while_suspended) { + schedule_work(&chip->irq_work); + chip->irq_while_suspended = false; + } + chip->irq_suspended = false; + spin_unlock_irqrestore(&chip->irq_lock, flags); + + return 0; +} + +static const struct of_device_id fusb302_dt_match[] __maybe_unused = { + {.compatible = "fcs,fusb302"}, + {}, +}; +MODULE_DEVICE_TABLE(of, fusb302_dt_match); + +static const struct i2c_device_id fusb302_i2c_device_id[] = { + {"typec_fusb302", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, fusb302_i2c_device_id); + +static const struct dev_pm_ops fusb302_pm_ops = { + .suspend = fusb302_pm_suspend, + .resume = fusb302_pm_resume, +}; + +static struct i2c_driver fusb302_driver = { + .driver = { + .name = "typec_fusb302", + .pm = &fusb302_pm_ops, + .of_match_table = of_match_ptr(fusb302_dt_match), + }, + .probe = fusb302_probe, + .remove = fusb302_remove, + .id_table = fusb302_i2c_device_id, +}; +module_i2c_driver(fusb302_driver); + +MODULE_AUTHOR("Yueyao Zhu <yueyao.zhu@gmail.com>"); +MODULE_DESCRIPTION("Fairchild FUSB302 Type-C Chip Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/tcpm/fusb302_reg.h b/drivers/usb/typec/tcpm/fusb302_reg.h new file mode 100644 index 0000000000..edc0e4b0f1 --- /dev/null +++ b/drivers/usb/typec/tcpm/fusb302_reg.h @@ -0,0 +1,177 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2016-2017 Google, Inc + * + * Fairchild FUSB302 Type-C Chip Driver + */ + +#ifndef FUSB302_REG_H +#define FUSB302_REG_H + +#define FUSB_REG_DEVICE_ID 0x01 +#define FUSB_REG_SWITCHES0 0x02 +#define FUSB_REG_SWITCHES0_CC2_PU_EN BIT(7) +#define FUSB_REG_SWITCHES0_CC1_PU_EN BIT(6) +#define FUSB_REG_SWITCHES0_VCONN_CC2 BIT(5) +#define FUSB_REG_SWITCHES0_VCONN_CC1 BIT(4) +#define FUSB_REG_SWITCHES0_MEAS_CC2 BIT(3) +#define FUSB_REG_SWITCHES0_MEAS_CC1 BIT(2) +#define FUSB_REG_SWITCHES0_CC2_PD_EN BIT(1) +#define FUSB_REG_SWITCHES0_CC1_PD_EN BIT(0) +#define FUSB_REG_SWITCHES1 0x03 +#define FUSB_REG_SWITCHES1_POWERROLE BIT(7) +#define FUSB_REG_SWITCHES1_SPECREV1 BIT(6) +#define FUSB_REG_SWITCHES1_SPECREV0 BIT(5) +#define FUSB_REG_SWITCHES1_DATAROLE BIT(4) +#define FUSB_REG_SWITCHES1_AUTO_GCRC BIT(2) +#define FUSB_REG_SWITCHES1_TXCC2_EN BIT(1) +#define FUSB_REG_SWITCHES1_TXCC1_EN BIT(0) +#define FUSB_REG_MEASURE 0x04 +#define FUSB_REG_MEASURE_MDAC5 BIT(7) +#define FUSB_REG_MEASURE_MDAC4 BIT(6) +#define FUSB_REG_MEASURE_MDAC3 BIT(5) +#define FUSB_REG_MEASURE_MDAC2 BIT(4) +#define FUSB_REG_MEASURE_MDAC1 BIT(3) +#define FUSB_REG_MEASURE_MDAC0 BIT(2) +#define FUSB_REG_MEASURE_VBUS BIT(1) +#define FUSB_REG_MEASURE_XXXX5 BIT(0) +#define FUSB_REG_CONTROL0 0x06 +#define FUSB_REG_CONTROL0_TX_FLUSH BIT(6) +#define FUSB_REG_CONTROL0_INT_MASK BIT(5) +#define FUSB_REG_CONTROL0_HOST_CUR_MASK (0xC) +#define FUSB_REG_CONTROL0_HOST_CUR_HIGH (0xC) +#define FUSB_REG_CONTROL0_HOST_CUR_MED (0x8) +#define FUSB_REG_CONTROL0_HOST_CUR_DEF (0x4) +#define FUSB_REG_CONTROL0_TX_START BIT(0) +#define FUSB_REG_CONTROL1 0x07 +#define FUSB_REG_CONTROL1_ENSOP2DB BIT(6) +#define FUSB_REG_CONTROL1_ENSOP1DB BIT(5) +#define FUSB_REG_CONTROL1_BIST_MODE2 BIT(4) +#define FUSB_REG_CONTROL1_RX_FLUSH BIT(2) +#define FUSB_REG_CONTROL1_ENSOP2 BIT(1) +#define FUSB_REG_CONTROL1_ENSOP1 BIT(0) +#define FUSB_REG_CONTROL2 0x08 +#define FUSB_REG_CONTROL2_MODE BIT(1) +#define FUSB_REG_CONTROL2_MODE_MASK (0x6) +#define FUSB_REG_CONTROL2_MODE_DFP (0x6) +#define FUSB_REG_CONTROL2_MODE_UFP (0x4) +#define FUSB_REG_CONTROL2_MODE_DRP (0x2) +#define FUSB_REG_CONTROL2_MODE_NONE (0x0) +#define FUSB_REG_CONTROL2_TOGGLE BIT(0) +#define FUSB_REG_CONTROL3 0x09 +#define FUSB_REG_CONTROL3_SEND_HARDRESET BIT(6) +#define FUSB_REG_CONTROL3_BIST_TMODE BIT(5) /* 302B Only */ +#define FUSB_REG_CONTROL3_AUTO_HARDRESET BIT(4) +#define FUSB_REG_CONTROL3_AUTO_SOFTRESET BIT(3) +#define FUSB_REG_CONTROL3_N_RETRIES BIT(1) +#define FUSB_REG_CONTROL3_N_RETRIES_MASK (0x6) +#define FUSB_REG_CONTROL3_N_RETRIES_3 (0x6) +#define FUSB_REG_CONTROL3_N_RETRIES_2 (0x4) +#define FUSB_REG_CONTROL3_N_RETRIES_1 (0x2) +#define FUSB_REG_CONTROL3_AUTO_RETRY BIT(0) +#define FUSB_REG_MASK 0x0A +#define FUSB_REG_MASK_VBUSOK BIT(7) +#define FUSB_REG_MASK_ACTIVITY BIT(6) +#define FUSB_REG_MASK_COMP_CHNG BIT(5) +#define FUSB_REG_MASK_CRC_CHK BIT(4) +#define FUSB_REG_MASK_ALERT BIT(3) +#define FUSB_REG_MASK_WAKE BIT(2) +#define FUSB_REG_MASK_COLLISION BIT(1) +#define FUSB_REG_MASK_BC_LVL BIT(0) +#define FUSB_REG_POWER 0x0B +#define FUSB_REG_POWER_PWR BIT(0) +#define FUSB_REG_POWER_PWR_LOW 0x1 +#define FUSB_REG_POWER_PWR_MEDIUM 0x3 +#define FUSB_REG_POWER_PWR_HIGH 0x7 +#define FUSB_REG_POWER_PWR_ALL 0xF +#define FUSB_REG_RESET 0x0C +#define FUSB_REG_RESET_PD_RESET BIT(1) +#define FUSB_REG_RESET_SW_RESET BIT(0) +#define FUSB_REG_MASKA 0x0E +#define FUSB_REG_MASKA_OCP_TEMP BIT(7) +#define FUSB_REG_MASKA_TOGDONE BIT(6) +#define FUSB_REG_MASKA_SOFTFAIL BIT(5) +#define FUSB_REG_MASKA_RETRYFAIL BIT(4) +#define FUSB_REG_MASKA_HARDSENT BIT(3) +#define FUSB_REG_MASKA_TX_SUCCESS BIT(2) +#define FUSB_REG_MASKA_SOFTRESET BIT(1) +#define FUSB_REG_MASKA_HARDRESET BIT(0) +#define FUSB_REG_MASKB 0x0F +#define FUSB_REG_MASKB_GCRCSENT BIT(0) +#define FUSB_REG_STATUS0A 0x3C +#define FUSB_REG_STATUS0A_SOFTFAIL BIT(5) +#define FUSB_REG_STATUS0A_RETRYFAIL BIT(4) +#define FUSB_REG_STATUS0A_POWER BIT(2) +#define FUSB_REG_STATUS0A_RX_SOFT_RESET BIT(1) +#define FUSB_REG_STATUS0A_RX_HARD_RESET BIT(0) +#define FUSB_REG_STATUS1A 0x3D +#define FUSB_REG_STATUS1A_TOGSS BIT(3) +#define FUSB_REG_STATUS1A_TOGSS_RUNNING 0x0 +#define FUSB_REG_STATUS1A_TOGSS_SRC1 0x1 +#define FUSB_REG_STATUS1A_TOGSS_SRC2 0x2 +#define FUSB_REG_STATUS1A_TOGSS_SNK1 0x5 +#define FUSB_REG_STATUS1A_TOGSS_SNK2 0x6 +#define FUSB_REG_STATUS1A_TOGSS_AA 0x7 +#define FUSB_REG_STATUS1A_TOGSS_POS (3) +#define FUSB_REG_STATUS1A_TOGSS_MASK (0x7) +#define FUSB_REG_STATUS1A_RXSOP2DB BIT(2) +#define FUSB_REG_STATUS1A_RXSOP1DB BIT(1) +#define FUSB_REG_STATUS1A_RXSOP BIT(0) +#define FUSB_REG_INTERRUPTA 0x3E +#define FUSB_REG_INTERRUPTA_OCP_TEMP BIT(7) +#define FUSB_REG_INTERRUPTA_TOGDONE BIT(6) +#define FUSB_REG_INTERRUPTA_SOFTFAIL BIT(5) +#define FUSB_REG_INTERRUPTA_RETRYFAIL BIT(4) +#define FUSB_REG_INTERRUPTA_HARDSENT BIT(3) +#define FUSB_REG_INTERRUPTA_TX_SUCCESS BIT(2) +#define FUSB_REG_INTERRUPTA_SOFTRESET BIT(1) +#define FUSB_REG_INTERRUPTA_HARDRESET BIT(0) +#define FUSB_REG_INTERRUPTB 0x3F +#define FUSB_REG_INTERRUPTB_GCRCSENT BIT(0) +#define FUSB_REG_STATUS0 0x40 +#define FUSB_REG_STATUS0_VBUSOK BIT(7) +#define FUSB_REG_STATUS0_ACTIVITY BIT(6) +#define FUSB_REG_STATUS0_COMP BIT(5) +#define FUSB_REG_STATUS0_CRC_CHK BIT(4) +#define FUSB_REG_STATUS0_ALERT BIT(3) +#define FUSB_REG_STATUS0_WAKE BIT(2) +#define FUSB_REG_STATUS0_BC_LVL_MASK 0x03 +#define FUSB_REG_STATUS0_BC_LVL_0_200 0x0 +#define FUSB_REG_STATUS0_BC_LVL_200_600 0x1 +#define FUSB_REG_STATUS0_BC_LVL_600_1230 0x2 +#define FUSB_REG_STATUS0_BC_LVL_1230_MAX 0x3 +#define FUSB_REG_STATUS0_BC_LVL1 BIT(1) +#define FUSB_REG_STATUS0_BC_LVL0 BIT(0) +#define FUSB_REG_STATUS1 0x41 +#define FUSB_REG_STATUS1_RXSOP2 BIT(7) +#define FUSB_REG_STATUS1_RXSOP1 BIT(6) +#define FUSB_REG_STATUS1_RX_EMPTY BIT(5) +#define FUSB_REG_STATUS1_RX_FULL BIT(4) +#define FUSB_REG_STATUS1_TX_EMPTY BIT(3) +#define FUSB_REG_STATUS1_TX_FULL BIT(2) +#define FUSB_REG_INTERRUPT 0x42 +#define FUSB_REG_INTERRUPT_VBUSOK BIT(7) +#define FUSB_REG_INTERRUPT_ACTIVITY BIT(6) +#define FUSB_REG_INTERRUPT_COMP_CHNG BIT(5) +#define FUSB_REG_INTERRUPT_CRC_CHK BIT(4) +#define FUSB_REG_INTERRUPT_ALERT BIT(3) +#define FUSB_REG_INTERRUPT_WAKE BIT(2) +#define FUSB_REG_INTERRUPT_COLLISION BIT(1) +#define FUSB_REG_INTERRUPT_BC_LVL BIT(0) +#define FUSB_REG_FIFOS 0x43 + +/* Tokens defined for the FUSB302 TX FIFO */ +enum fusb302_txfifo_tokens { + FUSB302_TKN_TXON = 0xA1, + FUSB302_TKN_SYNC1 = 0x12, + FUSB302_TKN_SYNC2 = 0x13, + FUSB302_TKN_SYNC3 = 0x1B, + FUSB302_TKN_RST1 = 0x15, + FUSB302_TKN_RST2 = 0x16, + FUSB302_TKN_PACKSYM = 0x80, + FUSB302_TKN_JAMCRC = 0xFF, + FUSB302_TKN_EOP = 0x14, + FUSB302_TKN_TXOFF = 0xFE, +}; + +#endif diff --git a/drivers/usb/typec/tcpm/maxim_contaminant.c b/drivers/usb/typec/tcpm/maxim_contaminant.c new file mode 100644 index 0000000000..f8504a90da --- /dev/null +++ b/drivers/usb/typec/tcpm/maxim_contaminant.c @@ -0,0 +1,387 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2022 Google, Inc + * + * USB-C module to reduce wakeups due to contaminants. + */ + +#include <linux/device.h> +#include <linux/irqreturn.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/usb/tcpci.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec.h> + +#include "tcpci_maxim.h" + +enum fladc_select { + CC1_SCALE1 = 1, + CC1_SCALE2, + CC2_SCALE1, + CC2_SCALE2, + SBU1, + SBU2, +}; + +#define FLADC_1uA_LSB_MV 25 +/* High range CC */ +#define FLADC_CC_HIGH_RANGE_LSB_MV 208 +/* Low range CC */ +#define FLADC_CC_LOW_RANGE_LSB_MV 126 + +/* 1uA current source */ +#define FLADC_CC_SCALE1 1 +/* 5 uA current source */ +#define FLADC_CC_SCALE2 5 + +#define FLADC_1uA_CC_OFFSET_MV 300 +#define FLADC_CC_HIGH_RANGE_OFFSET_MV 624 +#define FLADC_CC_LOW_RANGE_OFFSET_MV 378 + +#define CONTAMINANT_THRESHOLD_SBU_K 1000 +#define CONTAMINANT_THRESHOLD_CC_K 1000 + +#define READ1_SLEEP_MS 10 +#define READ2_SLEEP_MS 5 + +#define STATUS_CHECK(reg, mask, val) (((reg) & (mask)) == (val)) + +#define IS_CC_OPEN(cc_status) \ + (STATUS_CHECK((cc_status), TCPC_CC_STATUS_CC1_MASK << TCPC_CC_STATUS_CC1_SHIFT, \ + TCPC_CC_STATE_SRC_OPEN) && STATUS_CHECK((cc_status), \ + TCPC_CC_STATUS_CC2_MASK << \ + TCPC_CC_STATUS_CC2_SHIFT, \ + TCPC_CC_STATE_SRC_OPEN)) + +static int max_contaminant_adc_to_mv(struct max_tcpci_chip *chip, enum fladc_select channel, + bool ua_src, u8 fladc) +{ + /* SBU channels only have 1 scale with 1uA. */ + if ((ua_src && (channel == CC1_SCALE2 || channel == CC2_SCALE2 || channel == SBU1 || + channel == SBU2))) + /* Mean of range */ + return FLADC_1uA_CC_OFFSET_MV + (fladc * FLADC_1uA_LSB_MV); + else if (!ua_src && (channel == CC1_SCALE1 || channel == CC2_SCALE1)) + return FLADC_CC_HIGH_RANGE_OFFSET_MV + (fladc * FLADC_CC_HIGH_RANGE_LSB_MV); + else if (!ua_src && (channel == CC1_SCALE2 || channel == CC2_SCALE2)) + return FLADC_CC_LOW_RANGE_OFFSET_MV + (fladc * FLADC_CC_LOW_RANGE_LSB_MV); + + dev_err_once(chip->dev, "ADC ERROR: SCALE UNKNOWN"); + + return -EINVAL; +} + +static int max_contaminant_read_adc_mv(struct max_tcpci_chip *chip, enum fladc_select channel, + int sleep_msec, bool raw, bool ua_src) +{ + struct regmap *regmap = chip->data.regmap; + u8 fladc; + int ret; + + /* Channel & scale select */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_ADC_CTRL1, ADCINSEL_MASK, + channel << ADC_CHANNEL_OFFSET); + if (ret < 0) + return ret; + + /* Enable ADC */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_ADC_CTRL1, ADCEN, ADCEN); + if (ret < 0) + return ret; + + usleep_range(sleep_msec * 1000, (sleep_msec + 1) * 1000); + ret = max_tcpci_read8(chip, TCPC_VENDOR_FLADC_STATUS, &fladc); + if (ret < 0) + return ret; + + /* Disable ADC */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_ADC_CTRL1, ADCEN, 0); + if (ret < 0) + return ret; + + ret = regmap_update_bits(regmap, TCPC_VENDOR_ADC_CTRL1, ADCINSEL_MASK, 0); + if (ret < 0) + return ret; + + if (!raw) + return max_contaminant_adc_to_mv(chip, channel, ua_src, fladc); + else + return fladc; +} + +static int max_contaminant_read_resistance_kohm(struct max_tcpci_chip *chip, + enum fladc_select channel, int sleep_msec, bool raw) +{ + struct regmap *regmap = chip->data.regmap; + int mv; + int ret; + + if (channel == CC1_SCALE1 || channel == CC2_SCALE1 || channel == CC1_SCALE2 || + channel == CC2_SCALE2) { + /* Enable 1uA current source */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, CCLPMODESEL_MASK, + ULTRA_LOW_POWER_MODE); + if (ret < 0) + return ret; + + /* Enable 1uA current source */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, CCRPCTRL_MASK, UA_1_SRC); + if (ret < 0) + return ret; + + /* OVP disable */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, CCOVPDIS, CCOVPDIS); + if (ret < 0) + return ret; + + mv = max_contaminant_read_adc_mv(chip, channel, sleep_msec, raw, true); + if (mv < 0) + return ret; + + /* OVP enable */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, CCOVPDIS, 0); + if (ret < 0) + return ret; + /* returns KOhm as 1uA source is used. */ + return mv; + } + + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, SBUOVPDIS, SBUOVPDIS); + if (ret < 0) + return ret; + + /* SBU switches auto configure when channel is selected. */ + /* Enable 1ua current source */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, SBURPCTRL, SBURPCTRL); + if (ret < 0) + return ret; + + mv = max_contaminant_read_adc_mv(chip, channel, sleep_msec, raw, true); + if (mv < 0) + return ret; + /* Disable current source */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, SBURPCTRL, 0); + if (ret < 0) + return ret; + + /* OVP disable */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, SBUOVPDIS, 0); + if (ret < 0) + return ret; + + return mv; +} + +static int max_contaminant_read_comparators(struct max_tcpci_chip *chip, u8 *vendor_cc_status2_cc1, + u8 *vendor_cc_status2_cc2) +{ + struct regmap *regmap = chip->data.regmap; + int ret; + + /* Enable 80uA source */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, CCRPCTRL_MASK, UA_80_SRC); + if (ret < 0) + return ret; + + /* Enable comparators */ + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL1, CCCOMPEN, CCCOMPEN); + if (ret < 0) + return ret; + + /* Sleep to allow comparators settle */ + usleep_range(5000, 6000); + ret = regmap_update_bits(regmap, TCPC_TCPC_CTRL, TCPC_TCPC_CTRL_ORIENTATION, PLUG_ORNT_CC1); + if (ret < 0) + return ret; + + usleep_range(5000, 6000); + ret = max_tcpci_read8(chip, VENDOR_CC_STATUS2, vendor_cc_status2_cc1); + if (ret < 0) + return ret; + + ret = regmap_update_bits(regmap, TCPC_TCPC_CTRL, TCPC_TCPC_CTRL_ORIENTATION, PLUG_ORNT_CC2); + if (ret < 0) + return ret; + + usleep_range(5000, 6000); + ret = max_tcpci_read8(chip, VENDOR_CC_STATUS2, vendor_cc_status2_cc2); + if (ret < 0) + return ret; + + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL1, CCCOMPEN, 0); + if (ret < 0) + return ret; + + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, CCRPCTRL_MASK, 0); + if (ret < 0) + return ret; + + return 0; +} + +static int max_contaminant_detect_contaminant(struct max_tcpci_chip *chip) +{ + int cc1_k, cc2_k, sbu1_k, sbu2_k, ret; + u8 vendor_cc_status2_cc1 = 0xff, vendor_cc_status2_cc2 = 0xff; + u8 role_ctrl = 0, role_ctrl_backup = 0; + int inferred_state = NOT_DETECTED; + + ret = max_tcpci_read8(chip, TCPC_ROLE_CTRL, &role_ctrl); + if (ret < 0) + return NOT_DETECTED; + + role_ctrl_backup = role_ctrl; + role_ctrl = 0x0F; + ret = max_tcpci_write8(chip, TCPC_ROLE_CTRL, role_ctrl); + if (ret < 0) + return NOT_DETECTED; + + cc1_k = max_contaminant_read_resistance_kohm(chip, CC1_SCALE2, READ1_SLEEP_MS, false); + if (cc1_k < 0) + goto exit; + + cc2_k = max_contaminant_read_resistance_kohm(chip, CC2_SCALE2, READ2_SLEEP_MS, false); + if (cc2_k < 0) + goto exit; + + sbu1_k = max_contaminant_read_resistance_kohm(chip, SBU1, READ1_SLEEP_MS, false); + if (sbu1_k < 0) + goto exit; + + sbu2_k = max_contaminant_read_resistance_kohm(chip, SBU2, READ2_SLEEP_MS, false); + if (sbu2_k < 0) + goto exit; + + ret = max_contaminant_read_comparators(chip, &vendor_cc_status2_cc1, + &vendor_cc_status2_cc2); + + if (ret < 0) + goto exit; + + if ((!(CC1_VUFP_RD0P5 & vendor_cc_status2_cc1) || + !(CC2_VUFP_RD0P5 & vendor_cc_status2_cc2)) && + !(CC1_VUFP_RD0P5 & vendor_cc_status2_cc1 && CC2_VUFP_RD0P5 & vendor_cc_status2_cc2)) + inferred_state = SINK; + else if ((cc1_k < CONTAMINANT_THRESHOLD_CC_K || cc2_k < CONTAMINANT_THRESHOLD_CC_K) && + (sbu1_k < CONTAMINANT_THRESHOLD_SBU_K || sbu2_k < CONTAMINANT_THRESHOLD_SBU_K)) + inferred_state = DETECTED; + + if (inferred_state == NOT_DETECTED) + max_tcpci_write8(chip, TCPC_ROLE_CTRL, role_ctrl_backup); + else + max_tcpci_write8(chip, TCPC_ROLE_CTRL, (TCPC_ROLE_CTRL_DRP | 0xA)); + + return inferred_state; +exit: + max_tcpci_write8(chip, TCPC_ROLE_CTRL, role_ctrl_backup); + return NOT_DETECTED; +} + +static int max_contaminant_enable_dry_detection(struct max_tcpci_chip *chip) +{ + struct regmap *regmap = chip->data.regmap; + u8 temp; + int ret; + + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL3, CCWTRDEB_MASK | CCWTRSEL_MASK + | WTRCYCLE_MASK, CCWTRDEB_1MS << CCWTRDEB_SHIFT | + CCWTRSEL_1V << CCWTRSEL_SHIFT | WTRCYCLE_4_8_S << + WTRCYCLE_SHIFT); + if (ret < 0) + return ret; + + ret = regmap_update_bits(regmap, TCPC_ROLE_CTRL, TCPC_ROLE_CTRL_DRP, TCPC_ROLE_CTRL_DRP); + if (ret < 0) + return ret; + + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL1, CCCONNDRY, CCCONNDRY); + if (ret < 0) + return ret; + ret = max_tcpci_read8(chip, TCPC_VENDOR_CC_CTRL1, &temp); + if (ret < 0) + return ret; + + ret = regmap_update_bits(regmap, TCPC_VENDOR_CC_CTRL2, CCLPMODESEL_MASK, + ULTRA_LOW_POWER_MODE); + if (ret < 0) + return ret; + ret = max_tcpci_read8(chip, TCPC_VENDOR_CC_CTRL2, &temp); + if (ret < 0) + return ret; + + /* Enable Look4Connection before sending the command */ + ret = regmap_update_bits(regmap, TCPC_TCPC_CTRL, TCPC_TCPC_CTRL_EN_LK4CONN_ALRT, + TCPC_TCPC_CTRL_EN_LK4CONN_ALRT); + if (ret < 0) + return ret; + + ret = max_tcpci_write8(chip, TCPC_COMMAND, TCPC_CMD_LOOK4CONNECTION); + if (ret < 0) + return ret; + return 0; +} + +bool max_contaminant_is_contaminant(struct max_tcpci_chip *chip, bool disconnect_while_debounce) +{ + u8 cc_status, pwr_cntl; + int ret; + + ret = max_tcpci_read8(chip, TCPC_CC_STATUS, &cc_status); + if (ret < 0) + return false; + + ret = max_tcpci_read8(chip, TCPC_POWER_CTRL, &pwr_cntl); + if (ret < 0) + return false; + + if (chip->contaminant_state == NOT_DETECTED || chip->contaminant_state == SINK) { + if (!disconnect_while_debounce) + msleep(100); + + ret = max_tcpci_read8(chip, TCPC_CC_STATUS, &cc_status); + if (ret < 0) + return false; + + if (IS_CC_OPEN(cc_status)) { + u8 role_ctrl, role_ctrl_backup; + + ret = max_tcpci_read8(chip, TCPC_ROLE_CTRL, &role_ctrl); + if (ret < 0) + return false; + + role_ctrl_backup = role_ctrl; + role_ctrl |= 0x0F; + role_ctrl &= ~(TCPC_ROLE_CTRL_DRP); + ret = max_tcpci_write8(chip, TCPC_ROLE_CTRL, role_ctrl); + if (ret < 0) + return false; + + chip->contaminant_state = max_contaminant_detect_contaminant(chip); + + ret = max_tcpci_write8(chip, TCPC_ROLE_CTRL, role_ctrl_backup); + if (ret < 0) + return false; + + if (chip->contaminant_state == DETECTED) { + max_contaminant_enable_dry_detection(chip); + return true; + } + } + return false; + } else if (chip->contaminant_state == DETECTED) { + if (STATUS_CHECK(cc_status, TCPC_CC_STATUS_TOGGLING, 0)) { + chip->contaminant_state = max_contaminant_detect_contaminant(chip); + if (chip->contaminant_state == DETECTED) { + max_contaminant_enable_dry_detection(chip); + return true; + } + } + } + + return false; +} + +MODULE_DESCRIPTION("MAXIM TCPC CONTAMINANT Module"); +MODULE_AUTHOR("Badhri Jagan Sridharan <badhri@google.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/tcpm/qcom/Makefile b/drivers/usb/typec/tcpm/qcom/Makefile new file mode 100644 index 0000000000..dc1e8832e1 --- /dev/null +++ b/drivers/usb/typec/tcpm/qcom/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# +obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom_pmic_tcpm.o +qcom_pmic_tcpm-y += qcom_pmic_typec.o \ + qcom_pmic_typec_port.o \ + qcom_pmic_typec_pdphy.o diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c new file mode 100644 index 0000000000..581199d37b --- /dev/null +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Ltd. All rights reserved. + */ + +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/usb/role.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec_mux.h> + +#include <drm/drm_bridge.h> + +#include "qcom_pmic_typec_pdphy.h" +#include "qcom_pmic_typec_port.h" + +struct pmic_typec_resources { + struct pmic_typec_pdphy_resources *pdphy_res; + struct pmic_typec_port_resources *port_res; +}; + +struct pmic_typec { + struct device *dev; + struct tcpm_port *tcpm_port; + struct tcpc_dev tcpc; + struct pmic_typec_pdphy *pmic_typec_pdphy; + struct pmic_typec_port *pmic_typec_port; + bool vbus_enabled; + struct mutex lock; /* VBUS state serialization */ + struct drm_bridge bridge; +}; + +#define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc) + +static int qcom_pmic_typec_get_vbus(struct tcpc_dev *tcpc) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + int ret; + + mutex_lock(&tcpm->lock); + ret = tcpm->vbus_enabled || qcom_pmic_typec_port_get_vbus(tcpm->pmic_typec_port); + mutex_unlock(&tcpm->lock); + + return ret; +} + +static int qcom_pmic_typec_set_vbus(struct tcpc_dev *tcpc, bool on, bool sink) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + int ret = 0; + + mutex_lock(&tcpm->lock); + if (tcpm->vbus_enabled == on) + goto done; + + ret = qcom_pmic_typec_port_set_vbus(tcpm->pmic_typec_port, on); + if (ret) + goto done; + + tcpm->vbus_enabled = on; + tcpm_vbus_change(tcpm->tcpm_port); + +done: + dev_dbg(tcpm->dev, "set_vbus set: %d result %d\n", on, ret); + mutex_unlock(&tcpm->lock); + + return ret; +} + +static int qcom_pmic_typec_set_vconn(struct tcpc_dev *tcpc, bool on) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + + return qcom_pmic_typec_port_set_vconn(tcpm->pmic_typec_port, on); +} + +static int qcom_pmic_typec_get_cc(struct tcpc_dev *tcpc, + enum typec_cc_status *cc1, + enum typec_cc_status *cc2) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + + return qcom_pmic_typec_port_get_cc(tcpm->pmic_typec_port, cc1, cc2); +} + +static int qcom_pmic_typec_set_cc(struct tcpc_dev *tcpc, + enum typec_cc_status cc) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + + return qcom_pmic_typec_port_set_cc(tcpm->pmic_typec_port, cc); +} + +static int qcom_pmic_typec_set_polarity(struct tcpc_dev *tcpc, + enum typec_cc_polarity pol) +{ + /* Polarity is set separately by phy-qcom-qmp.c */ + return 0; +} + +static int qcom_pmic_typec_start_toggling(struct tcpc_dev *tcpc, + enum typec_port_type port_type, + enum typec_cc_status cc) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + + return qcom_pmic_typec_port_start_toggling(tcpm->pmic_typec_port, + port_type, cc); +} + +static int qcom_pmic_typec_set_roles(struct tcpc_dev *tcpc, bool attached, + enum typec_role power_role, + enum typec_data_role data_role) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + + return qcom_pmic_typec_pdphy_set_roles(tcpm->pmic_typec_pdphy, + data_role, power_role); +} + +static int qcom_pmic_typec_set_pd_rx(struct tcpc_dev *tcpc, bool on) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + + return qcom_pmic_typec_pdphy_set_pd_rx(tcpm->pmic_typec_pdphy, on); +} + +static int qcom_pmic_typec_pd_transmit(struct tcpc_dev *tcpc, + enum tcpm_transmit_type type, + const struct pd_message *msg, + unsigned int negotiated_rev) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + + return qcom_pmic_typec_pdphy_pd_transmit(tcpm->pmic_typec_pdphy, type, + msg, negotiated_rev); +} + +static int qcom_pmic_typec_init(struct tcpc_dev *tcpc) +{ + return 0; +} + +#if IS_ENABLED(CONFIG_DRM) +static int qcom_pmic_typec_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL; +} + +static const struct drm_bridge_funcs qcom_pmic_typec_bridge_funcs = { + .attach = qcom_pmic_typec_attach, +}; + +static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm) +{ + tcpm->bridge.funcs = &qcom_pmic_typec_bridge_funcs; +#ifdef CONFIG_OF + tcpm->bridge.of_node = of_get_child_by_name(tcpm->dev->of_node, "connector"); +#endif + tcpm->bridge.ops = DRM_BRIDGE_OP_HPD; + tcpm->bridge.type = DRM_MODE_CONNECTOR_DisplayPort; + + return devm_drm_bridge_add(tcpm->dev, &tcpm->bridge); +} +#else +static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm) +{ + return 0; +} +#endif + +static int qcom_pmic_typec_probe(struct platform_device *pdev) +{ + struct pmic_typec *tcpm; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + const struct pmic_typec_resources *res; + struct regmap *regmap; + u32 base[2]; + int ret; + + res = of_device_get_match_data(dev); + if (!res) + return -ENODEV; + + tcpm = devm_kzalloc(dev, sizeof(*tcpm), GFP_KERNEL); + if (!tcpm) + return -ENOMEM; + + tcpm->dev = dev; + tcpm->tcpc.init = qcom_pmic_typec_init; + tcpm->tcpc.get_vbus = qcom_pmic_typec_get_vbus; + tcpm->tcpc.set_vbus = qcom_pmic_typec_set_vbus; + tcpm->tcpc.set_cc = qcom_pmic_typec_set_cc; + tcpm->tcpc.get_cc = qcom_pmic_typec_get_cc; + tcpm->tcpc.set_polarity = qcom_pmic_typec_set_polarity; + tcpm->tcpc.set_vconn = qcom_pmic_typec_set_vconn; + tcpm->tcpc.start_toggling = qcom_pmic_typec_start_toggling; + tcpm->tcpc.set_pd_rx = qcom_pmic_typec_set_pd_rx; + tcpm->tcpc.set_roles = qcom_pmic_typec_set_roles; + tcpm->tcpc.pd_transmit = qcom_pmic_typec_pd_transmit; + + regmap = dev_get_regmap(dev->parent, NULL); + if (!regmap) { + dev_err(dev, "Failed to get regmap\n"); + return -ENODEV; + } + + ret = of_property_read_u32_array(np, "reg", base, 2); + if (ret) + return ret; + + tcpm->pmic_typec_port = qcom_pmic_typec_port_alloc(dev); + if (IS_ERR(tcpm->pmic_typec_port)) + return PTR_ERR(tcpm->pmic_typec_port); + + tcpm->pmic_typec_pdphy = qcom_pmic_typec_pdphy_alloc(dev); + if (IS_ERR(tcpm->pmic_typec_pdphy)) + return PTR_ERR(tcpm->pmic_typec_pdphy); + + ret = qcom_pmic_typec_port_probe(pdev, tcpm->pmic_typec_port, + res->port_res, regmap, base[0]); + if (ret) + return ret; + + ret = qcom_pmic_typec_pdphy_probe(pdev, tcpm->pmic_typec_pdphy, + res->pdphy_res, regmap, base[1]); + if (ret) + return ret; + + mutex_init(&tcpm->lock); + platform_set_drvdata(pdev, tcpm); + + ret = qcom_pmic_typec_init_drm(tcpm); + if (ret) + return ret; + + tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector"); + if (!tcpm->tcpc.fwnode) + return -EINVAL; + + tcpm->tcpm_port = tcpm_register_port(tcpm->dev, &tcpm->tcpc); + if (IS_ERR(tcpm->tcpm_port)) { + ret = PTR_ERR(tcpm->tcpm_port); + goto fwnode_remove; + } + + ret = qcom_pmic_typec_port_start(tcpm->pmic_typec_port, + tcpm->tcpm_port); + if (ret) + goto fwnode_remove; + + ret = qcom_pmic_typec_pdphy_start(tcpm->pmic_typec_pdphy, + tcpm->tcpm_port); + if (ret) + goto fwnode_remove; + + return 0; + +fwnode_remove: + fwnode_remove_software_node(tcpm->tcpc.fwnode); + + return ret; +} + +static void qcom_pmic_typec_remove(struct platform_device *pdev) +{ + struct pmic_typec *tcpm = platform_get_drvdata(pdev); + + qcom_pmic_typec_pdphy_stop(tcpm->pmic_typec_pdphy); + qcom_pmic_typec_port_stop(tcpm->pmic_typec_port); + tcpm_unregister_port(tcpm->tcpm_port); + fwnode_remove_software_node(tcpm->tcpc.fwnode); +} + +static struct pmic_typec_pdphy_resources pm8150b_pdphy_res = { + .irq_params = { + { + .virq = PMIC_PDPHY_SIG_TX_IRQ, + .irq_name = "sig-tx", + }, + { + .virq = PMIC_PDPHY_SIG_RX_IRQ, + .irq_name = "sig-rx", + }, + { + .virq = PMIC_PDPHY_MSG_TX_IRQ, + .irq_name = "msg-tx", + }, + { + .virq = PMIC_PDPHY_MSG_RX_IRQ, + .irq_name = "msg-rx", + }, + { + .virq = PMIC_PDPHY_MSG_TX_FAIL_IRQ, + .irq_name = "msg-tx-failed", + }, + { + .virq = PMIC_PDPHY_MSG_TX_DISCARD_IRQ, + .irq_name = "msg-tx-discarded", + }, + { + .virq = PMIC_PDPHY_MSG_RX_DISCARD_IRQ, + .irq_name = "msg-rx-discarded", + }, + }, + .nr_irqs = 7, +}; + +static struct pmic_typec_port_resources pm8150b_port_res = { + .irq_params = { + { + .irq_name = "vpd-detect", + .virq = PMIC_TYPEC_VPD_IRQ, + }, + + { + .irq_name = "cc-state-change", + .virq = PMIC_TYPEC_CC_STATE_IRQ, + }, + { + .irq_name = "vconn-oc", + .virq = PMIC_TYPEC_VCONN_OC_IRQ, + }, + + { + .irq_name = "vbus-change", + .virq = PMIC_TYPEC_VBUS_IRQ, + }, + + { + .irq_name = "attach-detach", + .virq = PMIC_TYPEC_ATTACH_DETACH_IRQ, + }, + { + .irq_name = "legacy-cable-detect", + .virq = PMIC_TYPEC_LEGACY_CABLE_IRQ, + }, + + { + .irq_name = "try-snk-src-detect", + .virq = PMIC_TYPEC_TRY_SNK_SRC_IRQ, + }, + }, + .nr_irqs = 7, +}; + +static struct pmic_typec_resources pm8150b_typec_res = { + .pdphy_res = &pm8150b_pdphy_res, + .port_res = &pm8150b_port_res, +}; + +static const struct of_device_id qcom_pmic_typec_table[] = { + { .compatible = "qcom,pm8150b-typec", .data = &pm8150b_typec_res }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table); + +static struct platform_driver qcom_pmic_typec_driver = { + .driver = { + .name = "qcom,pmic-typec", + .of_match_table = qcom_pmic_typec_table, + }, + .probe = qcom_pmic_typec_probe, + .remove_new = qcom_pmic_typec_remove, +}; + +module_platform_driver(qcom_pmic_typec_driver); + +MODULE_DESCRIPTION("QCOM PMIC USB Type-C Port Manager Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c new file mode 100644 index 0000000000..52c81378e3 --- /dev/null +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c @@ -0,0 +1,526 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Ltd. All rights reserved. + */ + +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/usb/pd.h> +#include <linux/usb/tcpm.h> +#include "qcom_pmic_typec_pdphy.h" + +struct pmic_typec_pdphy_irq_data { + int virq; + int irq; + struct pmic_typec_pdphy *pmic_typec_pdphy; +}; + +struct pmic_typec_pdphy { + struct device *dev; + struct tcpm_port *tcpm_port; + struct regmap *regmap; + u32 base; + + unsigned int nr_irqs; + struct pmic_typec_pdphy_irq_data *irq_data; + + struct work_struct reset_work; + struct work_struct receive_work; + struct regulator *vdd_pdphy; + spinlock_t lock; /* Register atomicity */ +}; + +static void qcom_pmic_typec_pdphy_reset_on(struct pmic_typec_pdphy *pmic_typec_pdphy) +{ + struct device *dev = pmic_typec_pdphy->dev; + int ret; + + /* Terminate TX */ + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_TX_CONTROL_REG, 0); + if (ret) + goto err; + + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_FRAME_FILTER_REG, 0); + if (ret) + goto err; + + return; +err: + dev_err(dev, "pd_reset_on error\n"); +} + +static void qcom_pmic_typec_pdphy_reset_off(struct pmic_typec_pdphy *pmic_typec_pdphy) +{ + struct device *dev = pmic_typec_pdphy->dev; + int ret; + + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_FRAME_FILTER_REG, + FRAME_FILTER_EN_SOP | FRAME_FILTER_EN_HARD_RESET); + if (ret) + dev_err(dev, "pd_reset_off error\n"); +} + +static void qcom_pmic_typec_pdphy_sig_reset_work(struct work_struct *work) +{ + struct pmic_typec_pdphy *pmic_typec_pdphy = container_of(work, struct pmic_typec_pdphy, + reset_work); + unsigned long flags; + + spin_lock_irqsave(&pmic_typec_pdphy->lock, flags); + + qcom_pmic_typec_pdphy_reset_on(pmic_typec_pdphy); + qcom_pmic_typec_pdphy_reset_off(pmic_typec_pdphy); + + spin_unlock_irqrestore(&pmic_typec_pdphy->lock, flags); + + tcpm_pd_hard_reset(pmic_typec_pdphy->tcpm_port); +} + +static int +qcom_pmic_typec_pdphy_clear_tx_control_reg(struct pmic_typec_pdphy *pmic_typec_pdphy) +{ + struct device *dev = pmic_typec_pdphy->dev; + unsigned int val; + int ret; + + /* Clear TX control register */ + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_TX_CONTROL_REG, 0); + if (ret) + goto done; + + /* Perform readback to ensure sufficient delay for command to latch */ + ret = regmap_read(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_TX_CONTROL_REG, &val); + +done: + if (ret) + dev_err(dev, "pd_clear_tx_control_reg: clear tx flag\n"); + + return ret; +} + +static int +qcom_pmic_typec_pdphy_pd_transmit_signal(struct pmic_typec_pdphy *pmic_typec_pdphy, + enum tcpm_transmit_type type, + unsigned int negotiated_rev) +{ + struct device *dev = pmic_typec_pdphy->dev; + unsigned int val; + unsigned long flags; + int ret; + + spin_lock_irqsave(&pmic_typec_pdphy->lock, flags); + + /* Clear TX control register */ + ret = qcom_pmic_typec_pdphy_clear_tx_control_reg(pmic_typec_pdphy); + if (ret) + goto done; + + val = TX_CONTROL_SEND_SIGNAL; + if (negotiated_rev == PD_REV30) + val |= TX_CONTROL_RETRY_COUNT(2); + else + val |= TX_CONTROL_RETRY_COUNT(3); + + if (type == TCPC_TX_CABLE_RESET || type == TCPC_TX_HARD_RESET) + val |= TX_CONTROL_FRAME_TYPE(1); + + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_TX_CONTROL_REG, val); + +done: + spin_unlock_irqrestore(&pmic_typec_pdphy->lock, flags); + + dev_vdbg(dev, "pd_transmit_signal: type %d negotiate_rev %d send %d\n", + type, negotiated_rev, ret); + + return ret; +} + +static int +qcom_pmic_typec_pdphy_pd_transmit_payload(struct pmic_typec_pdphy *pmic_typec_pdphy, + enum tcpm_transmit_type type, + const struct pd_message *msg, + unsigned int negotiated_rev) +{ + struct device *dev = pmic_typec_pdphy->dev; + unsigned int val, hdr_len, txbuf_len, txsize_len; + unsigned long flags; + int ret; + + spin_lock_irqsave(&pmic_typec_pdphy->lock, flags); + + ret = regmap_read(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_RX_ACKNOWLEDGE_REG, + &val); + if (ret) + goto done; + + if (val) { + dev_err(dev, "pd_transmit_payload: RX message pending\n"); + ret = -EBUSY; + goto done; + } + + /* Clear TX control register */ + ret = qcom_pmic_typec_pdphy_clear_tx_control_reg(pmic_typec_pdphy); + if (ret) + goto done; + + hdr_len = sizeof(msg->header); + txbuf_len = pd_header_cnt_le(msg->header) * 4; + txsize_len = hdr_len + txbuf_len - 1; + + /* Write message header sizeof(u16) to USB_PDPHY_TX_BUFFER_HDR_REG */ + ret = regmap_bulk_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_TX_BUFFER_HDR_REG, + &msg->header, hdr_len); + if (ret) + goto done; + + /* Write payload to USB_PDPHY_TX_BUFFER_DATA_REG for txbuf_len */ + if (txbuf_len) { + ret = regmap_bulk_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_TX_BUFFER_DATA_REG, + &msg->payload, txbuf_len); + if (ret) + goto done; + } + + /* Write total length ((header + data) - 1) to USB_PDPHY_TX_SIZE_REG */ + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_TX_SIZE_REG, + txsize_len); + if (ret) + goto done; + + /* Clear TX control register */ + ret = qcom_pmic_typec_pdphy_clear_tx_control_reg(pmic_typec_pdphy); + if (ret) + goto done; + + /* Initiate transmit with retry count as indicated by PD revision */ + val = TX_CONTROL_FRAME_TYPE(type) | TX_CONTROL_SEND_MSG; + if (pd_header_rev(msg->header) == PD_REV30) + val |= TX_CONTROL_RETRY_COUNT(2); + else + val |= TX_CONTROL_RETRY_COUNT(3); + + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_TX_CONTROL_REG, val); + +done: + spin_unlock_irqrestore(&pmic_typec_pdphy->lock, flags); + + if (ret) { + dev_err(dev, "pd_transmit_payload: hdr %*ph data %*ph ret %d\n", + hdr_len, &msg->header, txbuf_len, &msg->payload, ret); + } + + return ret; +} + +int qcom_pmic_typec_pdphy_pd_transmit(struct pmic_typec_pdphy *pmic_typec_pdphy, + enum tcpm_transmit_type type, + const struct pd_message *msg, + unsigned int negotiated_rev) +{ + struct device *dev = pmic_typec_pdphy->dev; + int ret; + + if (msg) { + ret = qcom_pmic_typec_pdphy_pd_transmit_payload(pmic_typec_pdphy, + type, msg, + negotiated_rev); + } else { + ret = qcom_pmic_typec_pdphy_pd_transmit_signal(pmic_typec_pdphy, + type, + negotiated_rev); + } + + if (ret) + dev_dbg(dev, "pd_transmit: type %x result %d\n", type, ret); + + return ret; +} + +static void qcom_pmic_typec_pdphy_pd_receive(struct pmic_typec_pdphy *pmic_typec_pdphy) +{ + struct device *dev = pmic_typec_pdphy->dev; + struct pd_message msg; + unsigned int size, rx_status; + unsigned long flags; + int ret; + + spin_lock_irqsave(&pmic_typec_pdphy->lock, flags); + + ret = regmap_read(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_RX_SIZE_REG, &size); + if (ret) + goto done; + + /* Hardware requires +1 of the real read value to be passed */ + if (size < 1 || size > sizeof(msg.payload) + 1) { + dev_dbg(dev, "pd_receive: invalid size %d\n", size); + goto done; + } + + size += 1; + ret = regmap_read(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_RX_STATUS_REG, + &rx_status); + + if (ret) + goto done; + + ret = regmap_bulk_read(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_RX_BUFFER_REG, + (u8 *)&msg, size); + if (ret) + goto done; + + /* Return ownership of RX buffer to hardware */ + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_RX_ACKNOWLEDGE_REG, 0); + +done: + spin_unlock_irqrestore(&pmic_typec_pdphy->lock, flags); + + if (!ret) { + dev_vdbg(dev, "pd_receive: handing %d bytes to tcpm\n", size); + tcpm_pd_receive(pmic_typec_pdphy->tcpm_port, &msg); + } +} + +static irqreturn_t qcom_pmic_typec_pdphy_isr(int irq, void *dev_id) +{ + struct pmic_typec_pdphy_irq_data *irq_data = dev_id; + struct pmic_typec_pdphy *pmic_typec_pdphy = irq_data->pmic_typec_pdphy; + struct device *dev = pmic_typec_pdphy->dev; + + switch (irq_data->virq) { + case PMIC_PDPHY_SIG_TX_IRQ: + dev_err(dev, "isr: tx_sig\n"); + break; + case PMIC_PDPHY_SIG_RX_IRQ: + schedule_work(&pmic_typec_pdphy->reset_work); + break; + case PMIC_PDPHY_MSG_TX_IRQ: + tcpm_pd_transmit_complete(pmic_typec_pdphy->tcpm_port, + TCPC_TX_SUCCESS); + break; + case PMIC_PDPHY_MSG_RX_IRQ: + qcom_pmic_typec_pdphy_pd_receive(pmic_typec_pdphy); + break; + case PMIC_PDPHY_MSG_TX_FAIL_IRQ: + tcpm_pd_transmit_complete(pmic_typec_pdphy->tcpm_port, + TCPC_TX_FAILED); + break; + case PMIC_PDPHY_MSG_TX_DISCARD_IRQ: + tcpm_pd_transmit_complete(pmic_typec_pdphy->tcpm_port, + TCPC_TX_DISCARDED); + break; + } + + return IRQ_HANDLED; +} + +int qcom_pmic_typec_pdphy_set_pd_rx(struct pmic_typec_pdphy *pmic_typec_pdphy, bool on) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&pmic_typec_pdphy->lock, flags); + + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_RX_ACKNOWLEDGE_REG, !on); + + spin_unlock_irqrestore(&pmic_typec_pdphy->lock, flags); + + dev_dbg(pmic_typec_pdphy->dev, "set_pd_rx: %s\n", on ? "on" : "off"); + + return ret; +} + +int qcom_pmic_typec_pdphy_set_roles(struct pmic_typec_pdphy *pmic_typec_pdphy, + bool data_role_host, bool power_role_src) +{ + struct device *dev = pmic_typec_pdphy->dev; + unsigned long flags; + int ret; + + spin_lock_irqsave(&pmic_typec_pdphy->lock, flags); + + ret = regmap_update_bits(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_MSG_CONFIG_REG, + MSG_CONFIG_PORT_DATA_ROLE | + MSG_CONFIG_PORT_POWER_ROLE, + data_role_host << 3 | power_role_src << 2); + + spin_unlock_irqrestore(&pmic_typec_pdphy->lock, flags); + + dev_dbg(dev, "pdphy_set_roles: data_role_host=%d power_role_src=%d\n", + data_role_host, power_role_src); + + return ret; +} + +static int qcom_pmic_typec_pdphy_enable(struct pmic_typec_pdphy *pmic_typec_pdphy) +{ + struct device *dev = pmic_typec_pdphy->dev; + int ret; + + /* PD 2.0, DR=TYPEC_DEVICE, PR=TYPEC_SINK */ + ret = regmap_update_bits(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_MSG_CONFIG_REG, + MSG_CONFIG_SPEC_REV_MASK, PD_REV20); + if (ret) + goto done; + + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_EN_CONTROL_REG, 0); + if (ret) + goto done; + + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_EN_CONTROL_REG, + CONTROL_ENABLE); + if (ret) + goto done; + + qcom_pmic_typec_pdphy_reset_off(pmic_typec_pdphy); +done: + if (ret) { + regulator_disable(pmic_typec_pdphy->vdd_pdphy); + dev_err(dev, "pdphy_enable fail %d\n", ret); + } + + return ret; +} + +static int qcom_pmic_typec_pdphy_disable(struct pmic_typec_pdphy *pmic_typec_pdphy) +{ + int ret; + + qcom_pmic_typec_pdphy_reset_on(pmic_typec_pdphy); + + ret = regmap_write(pmic_typec_pdphy->regmap, + pmic_typec_pdphy->base + USB_PDPHY_EN_CONTROL_REG, 0); + + return ret; +} + +static int pmic_typec_pdphy_reset(struct pmic_typec_pdphy *pmic_typec_pdphy) +{ + int ret; + + ret = qcom_pmic_typec_pdphy_disable(pmic_typec_pdphy); + if (ret) + goto done; + + usleep_range(400, 500); + ret = qcom_pmic_typec_pdphy_enable(pmic_typec_pdphy); +done: + return ret; +} + +int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy, + struct tcpm_port *tcpm_port) +{ + int i; + int ret; + + ret = regulator_enable(pmic_typec_pdphy->vdd_pdphy); + if (ret) + return ret; + + pmic_typec_pdphy->tcpm_port = tcpm_port; + + ret = pmic_typec_pdphy_reset(pmic_typec_pdphy); + if (ret) + return ret; + + for (i = 0; i < pmic_typec_pdphy->nr_irqs; i++) + enable_irq(pmic_typec_pdphy->irq_data[i].irq); + + return 0; +} + +void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy) +{ + int i; + + for (i = 0; i < pmic_typec_pdphy->nr_irqs; i++) + disable_irq(pmic_typec_pdphy->irq_data[i].irq); + + qcom_pmic_typec_pdphy_reset_on(pmic_typec_pdphy); + + regulator_disable(pmic_typec_pdphy->vdd_pdphy); +} + +struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev) +{ + return devm_kzalloc(dev, sizeof(struct pmic_typec_pdphy), GFP_KERNEL); +} + +int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev, + struct pmic_typec_pdphy *pmic_typec_pdphy, + struct pmic_typec_pdphy_resources *res, + struct regmap *regmap, + u32 base) +{ + struct device *dev = &pdev->dev; + struct pmic_typec_pdphy_irq_data *irq_data; + int i, ret, irq; + + if (!res->nr_irqs || res->nr_irqs > PMIC_PDPHY_MAX_IRQS) + return -EINVAL; + + irq_data = devm_kzalloc(dev, sizeof(*irq_data) * res->nr_irqs, + GFP_KERNEL); + if (!irq_data) + return -ENOMEM; + + pmic_typec_pdphy->vdd_pdphy = devm_regulator_get(dev, "vdd-pdphy"); + if (IS_ERR(pmic_typec_pdphy->vdd_pdphy)) + return PTR_ERR(pmic_typec_pdphy->vdd_pdphy); + + pmic_typec_pdphy->dev = dev; + pmic_typec_pdphy->base = base; + pmic_typec_pdphy->regmap = regmap; + pmic_typec_pdphy->nr_irqs = res->nr_irqs; + pmic_typec_pdphy->irq_data = irq_data; + spin_lock_init(&pmic_typec_pdphy->lock); + INIT_WORK(&pmic_typec_pdphy->reset_work, qcom_pmic_typec_pdphy_sig_reset_work); + + for (i = 0; i < res->nr_irqs; i++, irq_data++) { + irq = platform_get_irq_byname(pdev, res->irq_params[i].irq_name); + if (irq < 0) + return irq; + + irq_data->pmic_typec_pdphy = pmic_typec_pdphy; + irq_data->irq = irq; + irq_data->virq = res->irq_params[i].virq; + + ret = devm_request_threaded_irq(dev, irq, NULL, + qcom_pmic_typec_pdphy_isr, + IRQF_ONESHOT | IRQF_NO_AUTOEN, + res->irq_params[i].irq_name, + irq_data); + if (ret) + return ret; + } + + return 0; +} diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h new file mode 100644 index 0000000000..e67954e31b --- /dev/null +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Linaro Ltd. All rights reserved. + */ +#ifndef __QCOM_PMIC_PDPHY_H__ +#define __QCOM_PMIC_PDPHY_H__ + +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/usb/tcpm.h> + +#define USB_PDPHY_MAX_DATA_OBJ_LEN 28 +#define USB_PDPHY_MSG_HDR_LEN 2 + +/* PD PHY register offsets and bit fields */ +#define USB_PDPHY_MSG_CONFIG_REG 0x40 +#define MSG_CONFIG_PORT_DATA_ROLE BIT(3) +#define MSG_CONFIG_PORT_POWER_ROLE BIT(2) +#define MSG_CONFIG_SPEC_REV_MASK (BIT(1) | BIT(0)) + +#define USB_PDPHY_EN_CONTROL_REG 0x46 +#define CONTROL_ENABLE BIT(0) + +#define USB_PDPHY_RX_STATUS_REG 0x4A +#define RX_FRAME_TYPE (BIT(0) | BIT(1) | BIT(2)) + +#define USB_PDPHY_FRAME_FILTER_REG 0x4C +#define FRAME_FILTER_EN_HARD_RESET BIT(5) +#define FRAME_FILTER_EN_SOP BIT(0) + +#define USB_PDPHY_TX_SIZE_REG 0x42 +#define TX_SIZE_MASK 0xF + +#define USB_PDPHY_TX_CONTROL_REG 0x44 +#define TX_CONTROL_RETRY_COUNT(n) (((n) & 0x3) << 5) +#define TX_CONTROL_FRAME_TYPE(n) (((n) & 0x7) << 2) +#define TX_CONTROL_FRAME_TYPE_CABLE_RESET (0x1 << 2) +#define TX_CONTROL_SEND_SIGNAL BIT(1) +#define TX_CONTROL_SEND_MSG BIT(0) + +#define USB_PDPHY_RX_SIZE_REG 0x48 + +#define USB_PDPHY_RX_ACKNOWLEDGE_REG 0x4B +#define RX_BUFFER_TOKEN BIT(0) + +#define USB_PDPHY_BIST_MODE_REG 0x4E +#define BIST_MODE_MASK 0xF +#define BIST_ENABLE BIT(7) +#define PD_MSG_BIST 0x3 +#define PD_BIST_TEST_DATA_MODE 0x8 + +#define USB_PDPHY_TX_BUFFER_HDR_REG 0x60 +#define USB_PDPHY_TX_BUFFER_DATA_REG 0x62 + +#define USB_PDPHY_RX_BUFFER_REG 0x80 + +/* VDD regulator */ +#define VDD_PDPHY_VOL_MIN 2800000 /* uV */ +#define VDD_PDPHY_VOL_MAX 3300000 /* uV */ +#define VDD_PDPHY_HPM_LOAD 3000 /* uA */ + +/* Message Spec Rev field */ +#define PD_MSG_HDR_REV(hdr) (((hdr) >> 6) & 3) + +/* timers */ +#define RECEIVER_RESPONSE_TIME 15 /* tReceiverResponse */ +#define HARD_RESET_COMPLETE_TIME 5 /* tHardResetComplete */ + +/* Interrupt numbers */ +#define PMIC_PDPHY_SIG_TX_IRQ 0x0 +#define PMIC_PDPHY_SIG_RX_IRQ 0x1 +#define PMIC_PDPHY_MSG_TX_IRQ 0x2 +#define PMIC_PDPHY_MSG_RX_IRQ 0x3 +#define PMIC_PDPHY_MSG_TX_FAIL_IRQ 0x4 +#define PMIC_PDPHY_MSG_TX_DISCARD_IRQ 0x5 +#define PMIC_PDPHY_MSG_RX_DISCARD_IRQ 0x6 +#define PMIC_PDPHY_FR_SWAP_IRQ 0x7 + +/* Resources */ +#define PMIC_PDPHY_MAX_IRQS 0x08 + +struct pmic_typec_pdphy_irq_params { + int virq; + char *irq_name; +}; + +struct pmic_typec_pdphy_resources { + unsigned int nr_irqs; + struct pmic_typec_pdphy_irq_params irq_params[PMIC_PDPHY_MAX_IRQS]; +}; + +/* API */ +struct pmic_typec_pdphy; + +struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev); + +int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev, + struct pmic_typec_pdphy *pmic_typec_pdphy, + struct pmic_typec_pdphy_resources *res, + struct regmap *regmap, + u32 base); + +int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy, + struct tcpm_port *tcpm_port); + +void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy); + +int qcom_pmic_typec_pdphy_set_roles(struct pmic_typec_pdphy *pmic_typec_pdphy, + bool power_role_src, bool data_role_host); + +int qcom_pmic_typec_pdphy_set_pd_rx(struct pmic_typec_pdphy *pmic_typec_pdphy, bool on); + +int qcom_pmic_typec_pdphy_pd_transmit(struct pmic_typec_pdphy *pmic_typec_pdphy, + enum tcpm_transmit_type type, + const struct pd_message *msg, + unsigned int negotiated_rev); + +#endif /* __QCOM_PMIC_TYPEC_PDPHY_H__ */ diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c new file mode 100644 index 0000000000..a8f3f4d3a4 --- /dev/null +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c @@ -0,0 +1,560 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Ltd. All rights reserved. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec_mux.h> +#include <linux/workqueue.h> +#include "qcom_pmic_typec_port.h" + +struct pmic_typec_port_irq_data { + int virq; + int irq; + struct pmic_typec_port *pmic_typec_port; +}; + +struct pmic_typec_port { + struct device *dev; + struct tcpm_port *tcpm_port; + struct regmap *regmap; + u32 base; + unsigned int nr_irqs; + struct pmic_typec_port_irq_data *irq_data; + + struct regulator *vdd_vbus; + + int cc; + bool debouncing_cc; + struct delayed_work cc_debounce_dwork; + + spinlock_t lock; /* Register atomicity */ +}; + +static const char * const typec_cc_status_name[] = { + [TYPEC_CC_OPEN] = "Open", + [TYPEC_CC_RA] = "Ra", + [TYPEC_CC_RD] = "Rd", + [TYPEC_CC_RP_DEF] = "Rp-def", + [TYPEC_CC_RP_1_5] = "Rp-1.5", + [TYPEC_CC_RP_3_0] = "Rp-3.0", +}; + +static const char *rp_unknown = "unknown"; + +static const char *cc_to_name(enum typec_cc_status cc) +{ + if (cc > TYPEC_CC_RP_3_0) + return rp_unknown; + + return typec_cc_status_name[cc]; +} + +static const char * const rp_sel_name[] = { + [TYPEC_SRC_RP_SEL_80UA] = "Rp-def-80uA", + [TYPEC_SRC_RP_SEL_180UA] = "Rp-1.5-180uA", + [TYPEC_SRC_RP_SEL_330UA] = "Rp-3.0-330uA", +}; + +static const char *rp_sel_to_name(int rp_sel) +{ + if (rp_sel > TYPEC_SRC_RP_SEL_330UA) + return rp_unknown; + + return rp_sel_name[rp_sel]; +} + +#define misc_to_cc(msic) !!(misc & CC_ORIENTATION) ? "cc1" : "cc2" +#define misc_to_vconn(msic) !!(misc & CC_ORIENTATION) ? "cc2" : "cc1" + +static void qcom_pmic_typec_port_cc_debounce(struct work_struct *work) +{ + struct pmic_typec_port *pmic_typec_port = + container_of(work, struct pmic_typec_port, cc_debounce_dwork.work); + unsigned long flags; + + spin_lock_irqsave(&pmic_typec_port->lock, flags); + pmic_typec_port->debouncing_cc = false; + spin_unlock_irqrestore(&pmic_typec_port->lock, flags); + + dev_dbg(pmic_typec_port->dev, "Debounce cc complete\n"); +} + +static irqreturn_t pmic_typec_port_isr(int irq, void *dev_id) +{ + struct pmic_typec_port_irq_data *irq_data = dev_id; + struct pmic_typec_port *pmic_typec_port = irq_data->pmic_typec_port; + u32 misc_stat; + bool vbus_change = false; + bool cc_change = false; + unsigned long flags; + int ret; + + spin_lock_irqsave(&pmic_typec_port->lock, flags); + + ret = regmap_read(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_MISC_STATUS_REG, + &misc_stat); + if (ret) + goto done; + + switch (irq_data->virq) { + case PMIC_TYPEC_VBUS_IRQ: + vbus_change = true; + break; + case PMIC_TYPEC_CC_STATE_IRQ: + case PMIC_TYPEC_ATTACH_DETACH_IRQ: + if (!pmic_typec_port->debouncing_cc) + cc_change = true; + break; + } + +done: + spin_unlock_irqrestore(&pmic_typec_port->lock, flags); + + if (vbus_change) + tcpm_vbus_change(pmic_typec_port->tcpm_port); + + if (cc_change) + tcpm_cc_change(pmic_typec_port->tcpm_port); + + return IRQ_HANDLED; +} + +int qcom_pmic_typec_port_get_vbus(struct pmic_typec_port *pmic_typec_port) +{ + struct device *dev = pmic_typec_port->dev; + unsigned int misc; + int ret; + + ret = regmap_read(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_MISC_STATUS_REG, + &misc); + if (ret) + misc = 0; + + dev_dbg(dev, "get_vbus: 0x%08x detect %d\n", misc, !!(misc & TYPEC_VBUS_DETECT)); + + return !!(misc & TYPEC_VBUS_DETECT); +} + +int qcom_pmic_typec_port_set_vbus(struct pmic_typec_port *pmic_typec_port, bool on) +{ + u32 sm_stat; + u32 val; + int ret; + + if (on) { + ret = regulator_enable(pmic_typec_port->vdd_vbus); + if (ret) + return ret; + + val = TYPEC_SM_VBUS_VSAFE5V; + } else { + ret = regulator_disable(pmic_typec_port->vdd_vbus); + if (ret) + return ret; + + val = TYPEC_SM_VBUS_VSAFE0V; + } + + /* Poll waiting for transition to required vSafe5V or vSafe0V */ + ret = regmap_read_poll_timeout(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_SM_STATUS_REG, + sm_stat, sm_stat & val, + 100, 250000); + if (ret) + dev_warn(pmic_typec_port->dev, "vbus vsafe%dv fail\n", on ? 5 : 0); + + return 0; +} + +int qcom_pmic_typec_port_get_cc(struct pmic_typec_port *pmic_typec_port, + enum typec_cc_status *cc1, + enum typec_cc_status *cc2) +{ + struct device *dev = pmic_typec_port->dev; + unsigned int misc, val; + bool attached; + int ret = 0; + + ret = regmap_read(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_MISC_STATUS_REG, &misc); + if (ret) + goto done; + + attached = !!(misc & CC_ATTACHED); + + if (pmic_typec_port->debouncing_cc) { + ret = -EBUSY; + goto done; + } + + *cc1 = TYPEC_CC_OPEN; + *cc2 = TYPEC_CC_OPEN; + + if (!attached) + goto done; + + if (misc & SNK_SRC_MODE) { + ret = regmap_read(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_SRC_STATUS_REG, + &val); + if (ret) + goto done; + switch (val & DETECTED_SRC_TYPE_MASK) { + case AUDIO_ACCESS_RA_RA: + val = TYPEC_CC_RA; + *cc1 = TYPEC_CC_RA; + *cc2 = TYPEC_CC_RA; + break; + case SRC_RD_OPEN: + val = TYPEC_CC_RD; + break; + case SRC_RD_RA_VCONN: + val = TYPEC_CC_RD; + *cc1 = TYPEC_CC_RA; + *cc2 = TYPEC_CC_RA; + break; + default: + dev_warn(dev, "unexpected src status %.2x\n", val); + val = TYPEC_CC_RD; + break; + } + } else { + ret = regmap_read(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_SNK_STATUS_REG, + &val); + if (ret) + goto done; + switch (val & DETECTED_SNK_TYPE_MASK) { + case SNK_RP_STD: + val = TYPEC_CC_RP_DEF; + break; + case SNK_RP_1P5: + val = TYPEC_CC_RP_1_5; + break; + case SNK_RP_3P0: + val = TYPEC_CC_RP_3_0; + break; + default: + dev_warn(dev, "unexpected snk status %.2x\n", val); + val = TYPEC_CC_RP_DEF; + break; + } + val = TYPEC_CC_RP_DEF; + } + + if (misc & CC_ORIENTATION) + *cc2 = val; + else + *cc1 = val; + +done: + dev_dbg(dev, "get_cc: misc 0x%08x cc1 0x%08x %s cc2 0x%08x %s attached %d cc=%s\n", + misc, *cc1, cc_to_name(*cc1), *cc2, cc_to_name(*cc2), attached, + misc_to_cc(misc)); + + return ret; +} + +static void qcom_pmic_set_cc_debounce(struct pmic_typec_port *pmic_typec_port) +{ + pmic_typec_port->debouncing_cc = true; + schedule_delayed_work(&pmic_typec_port->cc_debounce_dwork, + msecs_to_jiffies(2)); +} + +int qcom_pmic_typec_port_set_cc(struct pmic_typec_port *pmic_typec_port, + enum typec_cc_status cc) +{ + struct device *dev = pmic_typec_port->dev; + unsigned int mode, currsrc; + unsigned int misc; + unsigned long flags; + int ret; + + spin_lock_irqsave(&pmic_typec_port->lock, flags); + + ret = regmap_read(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_MISC_STATUS_REG, + &misc); + if (ret) + goto done; + + mode = EN_SRC_ONLY; + + switch (cc) { + case TYPEC_CC_OPEN: + currsrc = TYPEC_SRC_RP_SEL_80UA; + break; + case TYPEC_CC_RP_DEF: + currsrc = TYPEC_SRC_RP_SEL_80UA; + break; + case TYPEC_CC_RP_1_5: + currsrc = TYPEC_SRC_RP_SEL_180UA; + break; + case TYPEC_CC_RP_3_0: + currsrc = TYPEC_SRC_RP_SEL_330UA; + break; + case TYPEC_CC_RD: + currsrc = TYPEC_SRC_RP_SEL_80UA; + mode = EN_SNK_ONLY; + break; + default: + dev_warn(dev, "unexpected set_cc %d\n", cc); + ret = -EINVAL; + goto done; + } + + if (mode == EN_SRC_ONLY) { + ret = regmap_write(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_CURRSRC_CFG_REG, + currsrc); + if (ret) + goto done; + } + + pmic_typec_port->cc = cc; + qcom_pmic_set_cc_debounce(pmic_typec_port); + ret = 0; + +done: + spin_unlock_irqrestore(&pmic_typec_port->lock, flags); + + dev_dbg(dev, "set_cc: currsrc=%x %s mode %s debounce %d attached %d cc=%s\n", + currsrc, rp_sel_to_name(currsrc), + mode == EN_SRC_ONLY ? "EN_SRC_ONLY" : "EN_SNK_ONLY", + pmic_typec_port->debouncing_cc, !!(misc & CC_ATTACHED), + misc_to_cc(misc)); + + return ret; +} + +int qcom_pmic_typec_port_set_vconn(struct pmic_typec_port *pmic_typec_port, bool on) +{ + struct device *dev = pmic_typec_port->dev; + unsigned int orientation, misc, mask, value; + unsigned long flags; + int ret; + + spin_lock_irqsave(&pmic_typec_port->lock, flags); + + ret = regmap_read(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_MISC_STATUS_REG, &misc); + if (ret) + goto done; + + /* Set VCONN on the inversion of the active CC channel */ + orientation = (misc & CC_ORIENTATION) ? 0 : VCONN_EN_ORIENTATION; + if (on) { + mask = VCONN_EN_ORIENTATION | VCONN_EN_VALUE; + value = orientation | VCONN_EN_VALUE | VCONN_EN_SRC; + } else { + mask = VCONN_EN_VALUE; + value = 0; + } + + ret = regmap_update_bits(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_VCONN_CONTROL_REG, + mask, value); +done: + spin_unlock_irqrestore(&pmic_typec_port->lock, flags); + + dev_dbg(dev, "set_vconn: orientation %d control 0x%08x state %s cc %s vconn %s\n", + orientation, value, on ? "on" : "off", misc_to_vconn(misc), misc_to_cc(misc)); + + return ret; +} + +int qcom_pmic_typec_port_start_toggling(struct pmic_typec_port *pmic_typec_port, + enum typec_port_type port_type, + enum typec_cc_status cc) +{ + struct device *dev = pmic_typec_port->dev; + unsigned int misc; + u8 mode = 0; + unsigned long flags; + int ret; + + switch (port_type) { + case TYPEC_PORT_SRC: + mode = EN_SRC_ONLY; + break; + case TYPEC_PORT_SNK: + mode = EN_SNK_ONLY; + break; + case TYPEC_PORT_DRP: + mode = EN_TRY_SNK; + break; + } + + spin_lock_irqsave(&pmic_typec_port->lock, flags); + + ret = regmap_read(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_MISC_STATUS_REG, &misc); + if (ret) + goto done; + + dev_dbg(dev, "start_toggling: misc 0x%08x attached %d port_type %d current cc %d new %d\n", + misc, !!(misc & CC_ATTACHED), port_type, pmic_typec_port->cc, cc); + + qcom_pmic_set_cc_debounce(pmic_typec_port); + + /* force it to toggle at least once */ + ret = regmap_write(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_MODE_CFG_REG, + TYPEC_DISABLE_CMD); + if (ret) + goto done; + + ret = regmap_write(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_MODE_CFG_REG, + mode); +done: + spin_unlock_irqrestore(&pmic_typec_port->lock, flags); + + return ret; +} + +#define TYPEC_INTR_EN_CFG_1_MASK \ + (TYPEC_LEGACY_CABLE_INT_EN | \ + TYPEC_NONCOMPLIANT_LEGACY_CABLE_INT_EN | \ + TYPEC_TRYSOURCE_DETECT_INT_EN | \ + TYPEC_TRYSINK_DETECT_INT_EN | \ + TYPEC_CCOUT_DETACH_INT_EN | \ + TYPEC_CCOUT_ATTACH_INT_EN | \ + TYPEC_VBUS_DEASSERT_INT_EN | \ + TYPEC_VBUS_ASSERT_INT_EN) + +#define TYPEC_INTR_EN_CFG_2_MASK \ + (TYPEC_STATE_MACHINE_CHANGE_INT_EN | TYPEC_VBUS_ERROR_INT_EN | \ + TYPEC_DEBOUNCE_DONE_INT_EN) + +int qcom_pmic_typec_port_start(struct pmic_typec_port *pmic_typec_port, + struct tcpm_port *tcpm_port) +{ + int i; + int mask; + int ret; + + /* Configure interrupt sources */ + ret = regmap_write(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_INTERRUPT_EN_CFG_1_REG, + TYPEC_INTR_EN_CFG_1_MASK); + if (ret) + goto done; + + ret = regmap_write(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_INTERRUPT_EN_CFG_2_REG, + TYPEC_INTR_EN_CFG_2_MASK); + if (ret) + goto done; + + /* start in TRY_SNK mode */ + ret = regmap_write(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_MODE_CFG_REG, EN_TRY_SNK); + if (ret) + goto done; + + /* Configure VCONN for software control */ + ret = regmap_update_bits(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_VCONN_CONTROL_REG, + VCONN_EN_SRC | VCONN_EN_VALUE, VCONN_EN_SRC); + if (ret) + goto done; + + /* Set CC threshold to 1.6 Volts | tPDdebounce = 10-20ms */ + mask = SEL_SRC_UPPER_REF | USE_TPD_FOR_EXITING_ATTACHSRC; + ret = regmap_update_bits(pmic_typec_port->regmap, + pmic_typec_port->base + TYPEC_EXIT_STATE_CFG_REG, + mask, mask); + if (ret) + goto done; + + pmic_typec_port->tcpm_port = tcpm_port; + + for (i = 0; i < pmic_typec_port->nr_irqs; i++) + enable_irq(pmic_typec_port->irq_data[i].irq); + +done: + return ret; +} + +void qcom_pmic_typec_port_stop(struct pmic_typec_port *pmic_typec_port) +{ + int i; + + for (i = 0; i < pmic_typec_port->nr_irqs; i++) + disable_irq(pmic_typec_port->irq_data[i].irq); +} + +struct pmic_typec_port *qcom_pmic_typec_port_alloc(struct device *dev) +{ + return devm_kzalloc(dev, sizeof(struct pmic_typec_port), GFP_KERNEL); +} + +int qcom_pmic_typec_port_probe(struct platform_device *pdev, + struct pmic_typec_port *pmic_typec_port, + struct pmic_typec_port_resources *res, + struct regmap *regmap, + u32 base) +{ + struct device *dev = &pdev->dev; + struct pmic_typec_port_irq_data *irq_data; + int i, ret, irq; + + if (!res->nr_irqs || res->nr_irqs > PMIC_TYPEC_MAX_IRQS) + return -EINVAL; + + irq_data = devm_kzalloc(dev, sizeof(*irq_data) * res->nr_irqs, + GFP_KERNEL); + if (!irq_data) + return -ENOMEM; + + pmic_typec_port->vdd_vbus = devm_regulator_get(dev, "vdd-vbus"); + if (IS_ERR(pmic_typec_port->vdd_vbus)) + return PTR_ERR(pmic_typec_port->vdd_vbus); + + pmic_typec_port->dev = dev; + pmic_typec_port->base = base; + pmic_typec_port->regmap = regmap; + pmic_typec_port->nr_irqs = res->nr_irqs; + pmic_typec_port->irq_data = irq_data; + spin_lock_init(&pmic_typec_port->lock); + INIT_DELAYED_WORK(&pmic_typec_port->cc_debounce_dwork, + qcom_pmic_typec_port_cc_debounce); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + for (i = 0; i < res->nr_irqs; i++, irq_data++) { + irq = platform_get_irq_byname(pdev, + res->irq_params[i].irq_name); + if (irq < 0) + return irq; + + irq_data->pmic_typec_port = pmic_typec_port; + irq_data->irq = irq; + irq_data->virq = res->irq_params[i].virq; + ret = devm_request_threaded_irq(dev, irq, NULL, pmic_typec_port_isr, + IRQF_ONESHOT | IRQF_NO_AUTOEN, + res->irq_params[i].irq_name, + irq_data); + if (ret) + return ret; + } + + return 0; +} diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h new file mode 100644 index 0000000000..d4d358c680 --- /dev/null +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h @@ -0,0 +1,195 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Linaro Ltd. All rights reserved. + */ +#ifndef __QCOM_PMIC_TYPEC_H__ +#define __QCOM_PMIC_TYPEC_H__ + +#include <linux/platform_device.h> +#include <linux/usb/tcpm.h> + +#define TYPEC_SNK_STATUS_REG 0x06 +#define DETECTED_SNK_TYPE_MASK GENMASK(6, 0) +#define SNK_DAM_MASK GENMASK(6, 4) +#define SNK_DAM_500MA BIT(6) +#define SNK_DAM_1500MA BIT(5) +#define SNK_DAM_3000MA BIT(4) +#define SNK_RP_STD BIT(3) +#define SNK_RP_1P5 BIT(2) +#define SNK_RP_3P0 BIT(1) +#define SNK_RP_SHORT BIT(0) + +#define TYPEC_SRC_STATUS_REG 0x08 +#define DETECTED_SRC_TYPE_MASK GENMASK(4, 0) +#define SRC_HIGH_BATT BIT(5) +#define SRC_DEBUG_ACCESS BIT(4) +#define SRC_RD_OPEN BIT(3) +#define SRC_RD_RA_VCONN BIT(2) +#define SRC_RA_OPEN BIT(1) +#define AUDIO_ACCESS_RA_RA BIT(0) + +#define TYPEC_STATE_MACHINE_STATUS_REG 0x09 +#define TYPEC_ATTACH_DETACH_STATE BIT(5) + +#define TYPEC_SM_STATUS_REG 0x0A +#define TYPEC_SM_VBUS_VSAFE5V BIT(5) +#define TYPEC_SM_VBUS_VSAFE0V BIT(6) +#define TYPEC_SM_USBIN_LT_LV BIT(7) + +#define TYPEC_MISC_STATUS_REG 0x0B +#define TYPEC_WATER_DETECTION_STATUS BIT(7) +#define SNK_SRC_MODE BIT(6) +#define TYPEC_VBUS_DETECT BIT(5) +#define TYPEC_VBUS_ERROR_STATUS BIT(4) +#define TYPEC_DEBOUNCE_DONE BIT(3) +#define CC_ORIENTATION BIT(1) +#define CC_ATTACHED BIT(0) + +#define LEGACY_CABLE_STATUS_REG 0x0D +#define TYPEC_LEGACY_CABLE_STATUS BIT(1) +#define TYPEC_NONCOMP_LEGACY_CABLE_STATUS BIT(0) + +#define TYPEC_U_USB_STATUS_REG 0x0F +#define U_USB_GROUND_NOVBUS BIT(6) +#define U_USB_GROUND BIT(4) +#define U_USB_FMB1 BIT(3) +#define U_USB_FLOAT1 BIT(2) +#define U_USB_FMB2 BIT(1) +#define U_USB_FLOAT2 BIT(0) + +#define TYPEC_MODE_CFG_REG 0x44 +#define TYPEC_TRY_MODE_MASK GENMASK(4, 3) +#define EN_TRY_SNK BIT(4) +#define EN_TRY_SRC BIT(3) +#define TYPEC_POWER_ROLE_CMD_MASK GENMASK(2, 0) +#define EN_SRC_ONLY BIT(2) +#define EN_SNK_ONLY BIT(1) +#define TYPEC_DISABLE_CMD BIT(0) + +#define TYPEC_VCONN_CONTROL_REG 0x46 +#define VCONN_EN_ORIENTATION BIT(2) +#define VCONN_EN_VALUE BIT(1) +#define VCONN_EN_SRC BIT(0) + +#define TYPEC_CCOUT_CONTROL_REG 0x48 +#define TYPEC_CCOUT_BUFFER_EN BIT(2) +#define TYPEC_CCOUT_VALUE BIT(1) +#define TYPEC_CCOUT_SRC BIT(0) + +#define DEBUG_ACCESS_SRC_CFG_REG 0x4C +#define EN_UNORIENTED_DEBUG_ACCESS_SRC BIT(0) + +#define TYPE_C_CRUDE_SENSOR_CFG_REG 0x4e +#define EN_SRC_CRUDE_SENSOR BIT(1) +#define EN_SNK_CRUDE_SENSOR BIT(0) + +#define TYPEC_EXIT_STATE_CFG_REG 0x50 +#define BYPASS_VSAFE0V_DURING_ROLE_SWAP BIT(3) +#define SEL_SRC_UPPER_REF BIT(2) +#define USE_TPD_FOR_EXITING_ATTACHSRC BIT(1) +#define EXIT_SNK_BASED_ON_CC BIT(0) + +#define TYPEC_CURRSRC_CFG_REG 0x52 +#define TYPEC_SRC_RP_SEL_330UA BIT(1) +#define TYPEC_SRC_RP_SEL_180UA BIT(0) +#define TYPEC_SRC_RP_SEL_80UA 0 +#define TYPEC_SRC_RP_SEL_MASK GENMASK(1, 0) + +#define TYPEC_INTERRUPT_EN_CFG_1_REG 0x5E +#define TYPEC_LEGACY_CABLE_INT_EN BIT(7) +#define TYPEC_NONCOMPLIANT_LEGACY_CABLE_INT_EN BIT(6) +#define TYPEC_TRYSOURCE_DETECT_INT_EN BIT(5) +#define TYPEC_TRYSINK_DETECT_INT_EN BIT(4) +#define TYPEC_CCOUT_DETACH_INT_EN BIT(3) +#define TYPEC_CCOUT_ATTACH_INT_EN BIT(2) +#define TYPEC_VBUS_DEASSERT_INT_EN BIT(1) +#define TYPEC_VBUS_ASSERT_INT_EN BIT(0) + +#define TYPEC_INTERRUPT_EN_CFG_2_REG 0x60 +#define TYPEC_SRC_BATT_HPWR_INT_EN BIT(6) +#define MICRO_USB_STATE_CHANGE_INT_EN BIT(5) +#define TYPEC_STATE_MACHINE_CHANGE_INT_EN BIT(4) +#define TYPEC_DEBUG_ACCESS_DETECT_INT_EN BIT(3) +#define TYPEC_WATER_DETECTION_INT_EN BIT(2) +#define TYPEC_VBUS_ERROR_INT_EN BIT(1) +#define TYPEC_DEBOUNCE_DONE_INT_EN BIT(0) + +#define TYPEC_DEBOUNCE_OPTION_REG 0x62 +#define REDUCE_TCCDEBOUNCE_TO_2MS BIT(2) + +#define TYPE_C_SBU_CFG_REG 0x6A +#define SEL_SBU1_ISRC_VAL 0x04 +#define SEL_SBU2_ISRC_VAL 0x01 + +#define TYPEC_U_USB_CFG_REG 0x70 +#define EN_MICRO_USB_FACTORY_MODE BIT(1) +#define EN_MICRO_USB_MODE BIT(0) + +#define TYPEC_PMI632_U_USB_WATER_PROTECTION_CFG_REG 0x72 + +#define TYPEC_U_USB_WATER_PROTECTION_CFG_REG 0x73 +#define EN_MICRO_USB_WATER_PROTECTION BIT(4) +#define MICRO_USB_DETECTION_ON_TIME_CFG_MASK GENMASK(3, 2) +#define MICRO_USB_DETECTION_PERIOD_CFG_MASK GENMASK(1, 0) + +#define TYPEC_PMI632_MICRO_USB_MODE_REG 0x73 +#define MICRO_USB_MODE_ONLY BIT(0) + +/* Interrupt numbers */ +#define PMIC_TYPEC_OR_RID_IRQ 0x0 +#define PMIC_TYPEC_VPD_IRQ 0x1 +#define PMIC_TYPEC_CC_STATE_IRQ 0x2 +#define PMIC_TYPEC_VCONN_OC_IRQ 0x3 +#define PMIC_TYPEC_VBUS_IRQ 0x4 +#define PMIC_TYPEC_ATTACH_DETACH_IRQ 0x5 +#define PMIC_TYPEC_LEGACY_CABLE_IRQ 0x6 +#define PMIC_TYPEC_TRY_SNK_SRC_IRQ 0x7 + +/* Resources */ +#define PMIC_TYPEC_MAX_IRQS 0x08 + +struct pmic_typec_port_irq_params { + int virq; + char *irq_name; +}; + +struct pmic_typec_port_resources { + unsigned int nr_irqs; + struct pmic_typec_port_irq_params irq_params[PMIC_TYPEC_MAX_IRQS]; +}; + +/* API */ +struct pmic_typec; + +struct pmic_typec_port *qcom_pmic_typec_port_alloc(struct device *dev); + +int qcom_pmic_typec_port_probe(struct platform_device *pdev, + struct pmic_typec_port *pmic_typec_port, + struct pmic_typec_port_resources *res, + struct regmap *regmap, + u32 base); + +int qcom_pmic_typec_port_start(struct pmic_typec_port *pmic_typec_port, + struct tcpm_port *tcpm_port); + +void qcom_pmic_typec_port_stop(struct pmic_typec_port *pmic_typec_port); + +int qcom_pmic_typec_port_get_cc(struct pmic_typec_port *pmic_typec_port, + enum typec_cc_status *cc1, + enum typec_cc_status *cc2); + +int qcom_pmic_typec_port_set_cc(struct pmic_typec_port *pmic_typec_port, + enum typec_cc_status cc); + +int qcom_pmic_typec_port_get_vbus(struct pmic_typec_port *pmic_typec_port); + +int qcom_pmic_typec_port_set_vconn(struct pmic_typec_port *pmic_typec_port, bool on); + +int qcom_pmic_typec_port_start_toggling(struct pmic_typec_port *pmic_typec_port, + enum typec_port_type port_type, + enum typec_cc_status cc); + +int qcom_pmic_typec_port_set_vbus(struct pmic_typec_port *pmic_typec_port, bool on); + +#endif /* __QCOM_PMIC_TYPE_C_PORT_H__ */ diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c new file mode 100644 index 0000000000..0ee3e6e29b --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -0,0 +1,909 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2017 Google, Inc + * + * USB Type-C Port Controller Interface. + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/usb/pd.h> +#include <linux/usb/tcpci.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec.h> + +#define PD_RETRY_COUNT_DEFAULT 3 +#define PD_RETRY_COUNT_3_0_OR_HIGHER 2 +#define AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV 3500 +#define VSINKPD_MIN_IR_DROP_MV 750 +#define VSRC_NEW_MIN_PERCENT 95 +#define VSRC_VALID_MIN_MV 500 +#define VPPS_NEW_MIN_PERCENT 95 +#define VPPS_VALID_MIN_MV 100 +#define VSINKDISCONNECT_PD_MIN_PERCENT 90 + +struct tcpci { + struct device *dev; + + struct tcpm_port *port; + + struct regmap *regmap; + unsigned int alert_mask; + + bool controls_vbus; + + struct tcpc_dev tcpc; + struct tcpci_data *data; +}; + +struct tcpci_chip { + struct tcpci *tcpci; + struct tcpci_data data; +}; + +struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci) +{ + return tcpci->port; +} +EXPORT_SYMBOL_GPL(tcpci_get_tcpm_port); + +static inline struct tcpci *tcpc_to_tcpci(struct tcpc_dev *tcpc) +{ + return container_of(tcpc, struct tcpci, tcpc); +} + +static int tcpci_read16(struct tcpci *tcpci, unsigned int reg, u16 *val) +{ + return regmap_raw_read(tcpci->regmap, reg, val, sizeof(u16)); +} + +static int tcpci_write16(struct tcpci *tcpci, unsigned int reg, u16 val) +{ + return regmap_raw_write(tcpci->regmap, reg, &val, sizeof(u16)); +} + +static int tcpci_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + bool vconn_pres; + enum typec_cc_polarity polarity = TYPEC_POLARITY_CC1; + unsigned int reg; + int ret; + + ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, ®); + if (ret < 0) + return ret; + + vconn_pres = !!(reg & TCPC_POWER_STATUS_VCONN_PRES); + if (vconn_pres) { + ret = regmap_read(tcpci->regmap, TCPC_TCPC_CTRL, ®); + if (ret < 0) + return ret; + + if (reg & TCPC_TCPC_CTRL_ORIENTATION) + polarity = TYPEC_POLARITY_CC2; + } + + switch (cc) { + case TYPEC_CC_RA: + reg = (TCPC_ROLE_CTRL_CC_RA << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RA << TCPC_ROLE_CTRL_CC2_SHIFT); + break; + case TYPEC_CC_RD: + reg = (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT); + break; + case TYPEC_CC_RP_DEF: + reg = (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT) | + (TCPC_ROLE_CTRL_RP_VAL_DEF << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_1_5: + reg = (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT) | + (TCPC_ROLE_CTRL_RP_VAL_1_5 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_3_0: + reg = (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT) | + (TCPC_ROLE_CTRL_RP_VAL_3_0 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_OPEN: + default: + reg = (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC2_SHIFT); + break; + } + + if (vconn_pres) { + if (polarity == TYPEC_POLARITY_CC2) { + reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT); + reg |= (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT); + } else { + reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT); + reg |= (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC2_SHIFT); + } + } + + ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_apply_rc(struct tcpc_dev *tcpc, enum typec_cc_status cc, + enum typec_cc_polarity polarity) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg; + int ret; + + ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, ®); + if (ret < 0) + return ret; + + /* + * APPLY_RC state is when ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2 and vbus autodischarge on + * disconnect is disabled. Bail out when ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2. + */ + if (((reg & (TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT)) >> + TCPC_ROLE_CTRL_CC2_SHIFT) != + ((reg & (TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT)) >> + TCPC_ROLE_CTRL_CC1_SHIFT)) + return 0; + + return regmap_update_bits(tcpci->regmap, TCPC_ROLE_CTRL, polarity == TYPEC_POLARITY_CC1 ? + TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT : + TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT, + TCPC_ROLE_CTRL_CC_OPEN); +} + +static int tcpci_start_toggling(struct tcpc_dev *tcpc, + enum typec_port_type port_type, + enum typec_cc_status cc) +{ + int ret; + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg = TCPC_ROLE_CTRL_DRP; + + if (port_type != TYPEC_PORT_DRP) + return -EOPNOTSUPP; + + /* Handle vendor drp toggling */ + if (tcpci->data->start_drp_toggling) { + ret = tcpci->data->start_drp_toggling(tcpci, tcpci->data, cc); + if (ret < 0) + return ret; + } + + switch (cc) { + default: + case TYPEC_CC_RP_DEF: + reg |= (TCPC_ROLE_CTRL_RP_VAL_DEF << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_1_5: + reg |= (TCPC_ROLE_CTRL_RP_VAL_1_5 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_3_0: + reg |= (TCPC_ROLE_CTRL_RP_VAL_3_0 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + } + + if (cc == TYPEC_CC_RD) + reg |= (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT); + else + reg |= (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT); + ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg); + if (ret < 0) + return ret; + return regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_LOOK4CONNECTION); +} + +static int tcpci_get_cc(struct tcpc_dev *tcpc, + enum typec_cc_status *cc1, enum typec_cc_status *cc2) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg, role_control; + int ret; + + ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, &role_control); + if (ret < 0) + return ret; + + ret = regmap_read(tcpci->regmap, TCPC_CC_STATUS, ®); + if (ret < 0) + return ret; + + *cc1 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC1_SHIFT) & + TCPC_CC_STATUS_CC1_MASK, + reg & TCPC_CC_STATUS_TERM || + tcpc_presenting_rd(role_control, CC1)); + *cc2 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC2_SHIFT) & + TCPC_CC_STATUS_CC2_MASK, + reg & TCPC_CC_STATUS_TERM || + tcpc_presenting_rd(role_control, CC2)); + + return 0; +} + +static int tcpci_set_polarity(struct tcpc_dev *tcpc, + enum typec_cc_polarity polarity) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg; + int ret; + enum typec_cc_status cc1, cc2; + + /* Obtain Rp setting from role control */ + ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, ®); + if (ret < 0) + return ret; + + ret = tcpci_get_cc(tcpc, &cc1, &cc2); + if (ret < 0) + return ret; + + /* + * When port has drp toggling enabled, ROLE_CONTROL would only have the initial + * terminations for the toggling and does not indicate the final cc + * terminations when ConnectionResult is 0 i.e. drp toggling stops and + * the connection is resolved. Infer port role from TCPC_CC_STATUS based on the + * terminations seen. The port role is then used to set the cc terminations. + */ + if (reg & TCPC_ROLE_CTRL_DRP) { + /* Disable DRP for the OPEN setting to take effect */ + reg = reg & ~TCPC_ROLE_CTRL_DRP; + + if (polarity == TYPEC_POLARITY_CC2) { + reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT); + /* Local port is source */ + if (cc2 == TYPEC_CC_RD) + /* Role control would have the Rp setting when DRP was enabled */ + reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT; + else + reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT; + } else { + reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT); + /* Local port is source */ + if (cc1 == TYPEC_CC_RD) + /* Role control would have the Rp setting when DRP was enabled */ + reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT; + else + reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT; + } + } + + if (polarity == TYPEC_POLARITY_CC2) + reg |= TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT; + else + reg |= TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC2_SHIFT; + ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg); + if (ret < 0) + return ret; + + return regmap_write(tcpci->regmap, TCPC_TCPC_CTRL, + (polarity == TYPEC_POLARITY_CC2) ? + TCPC_TCPC_CTRL_ORIENTATION : 0); +} + +static void tcpci_set_partner_usb_comm_capable(struct tcpc_dev *tcpc, bool capable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + + if (tcpci->data->set_partner_usb_comm_capable) + tcpci->data->set_partner_usb_comm_capable(tcpci, tcpci->data, capable); +} + +static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + int ret; + + /* Handle vendor set vconn */ + if (tcpci->data->set_vconn) { + ret = tcpci->data->set_vconn(tcpci, tcpci->data, enable); + if (ret < 0) + return ret; + } + + return regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, + TCPC_POWER_CTRL_VCONN_ENABLE, + enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0); +} + +static int tcpci_enable_auto_vbus_discharge(struct tcpc_dev *dev, bool enable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(dev); + int ret; + + ret = regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_POWER_CTRL_AUTO_DISCHARGE, + enable ? TCPC_POWER_CTRL_AUTO_DISCHARGE : 0); + return ret; +} + +static int tcpci_set_auto_vbus_discharge_threshold(struct tcpc_dev *dev, enum typec_pwr_opmode mode, + bool pps_active, u32 requested_vbus_voltage_mv) +{ + struct tcpci *tcpci = tcpc_to_tcpci(dev); + unsigned int pwr_ctrl, threshold = 0; + int ret; + + /* + * Indicates that vbus is going to go away due PR_SWAP, hard reset etc. + * Do not discharge vbus here. + */ + if (requested_vbus_voltage_mv == 0) + goto write_thresh; + + ret = regmap_read(tcpci->regmap, TCPC_POWER_CTRL, &pwr_ctrl); + if (ret < 0) + return ret; + + if (pwr_ctrl & TCPC_FAST_ROLE_SWAP_EN) { + /* To prevent disconnect when the source is fast role swap is capable. */ + threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV; + } else if (mode == TYPEC_PWR_MODE_PD) { + if (pps_active) + threshold = ((VPPS_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) - + VSINKPD_MIN_IR_DROP_MV - VPPS_VALID_MIN_MV) * + VSINKDISCONNECT_PD_MIN_PERCENT / 100; + else + threshold = ((VSRC_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) - + VSINKPD_MIN_IR_DROP_MV - VSRC_VALID_MIN_MV) * + VSINKDISCONNECT_PD_MIN_PERCENT / 100; + } else { + /* 3.5V for non-pd sink */ + threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV; + } + + threshold = threshold / TCPC_VBUS_SINK_DISCONNECT_THRESH_LSB_MV; + + if (threshold > TCPC_VBUS_SINK_DISCONNECT_THRESH_MAX) + return -EINVAL; + +write_thresh: + return tcpci_write16(tcpci, TCPC_VBUS_SINK_DISCONNECT_THRESH, threshold); +} + +static int tcpci_enable_frs(struct tcpc_dev *dev, bool enable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(dev); + int ret; + + /* To prevent disconnect during FRS, set disconnect threshold to 3.5V */ + ret = tcpci_write16(tcpci, TCPC_VBUS_SINK_DISCONNECT_THRESH, enable ? 0 : 0x8c); + if (ret < 0) + return ret; + + ret = regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_FAST_ROLE_SWAP_EN, enable ? + TCPC_FAST_ROLE_SWAP_EN : 0); + + return ret; +} + +static void tcpci_frs_sourcing_vbus(struct tcpc_dev *dev) +{ + struct tcpci *tcpci = tcpc_to_tcpci(dev); + + if (tcpci->data->frs_sourcing_vbus) + tcpci->data->frs_sourcing_vbus(tcpci, tcpci->data); +} + +static void tcpci_check_contaminant(struct tcpc_dev *dev) +{ + struct tcpci *tcpci = tcpc_to_tcpci(dev); + + if (tcpci->data->check_contaminant) + tcpci->data->check_contaminant(tcpci, tcpci->data); +} + +static int tcpci_set_bist_data(struct tcpc_dev *tcpc, bool enable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + + return regmap_update_bits(tcpci->regmap, TCPC_TCPC_CTRL, TCPC_TCPC_CTRL_BIST_TM, + enable ? TCPC_TCPC_CTRL_BIST_TM : 0); +} + +static int tcpci_set_roles(struct tcpc_dev *tcpc, bool attached, + enum typec_role role, enum typec_data_role data) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg; + int ret; + + reg = PD_REV20 << TCPC_MSG_HDR_INFO_REV_SHIFT; + if (role == TYPEC_SOURCE) + reg |= TCPC_MSG_HDR_INFO_PWR_ROLE; + if (data == TYPEC_HOST) + reg |= TCPC_MSG_HDR_INFO_DATA_ROLE; + ret = regmap_write(tcpci->regmap, TCPC_MSG_HDR_INFO, reg); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_set_pd_rx(struct tcpc_dev *tcpc, bool enable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg = 0; + int ret; + + if (enable) + reg = TCPC_RX_DETECT_SOP | TCPC_RX_DETECT_HARD_RESET; + ret = regmap_write(tcpci->regmap, TCPC_RX_DETECT, reg); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_get_vbus(struct tcpc_dev *tcpc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg; + int ret; + + ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, ®); + if (ret < 0) + return ret; + + return !!(reg & TCPC_POWER_STATUS_VBUS_PRES); +} + +static bool tcpci_is_vbus_vsafe0v(struct tcpc_dev *tcpc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg; + int ret; + + ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, ®); + if (ret < 0) + return false; + + return !!(reg & TCPC_EXTENDED_STATUS_VSAFE0V); +} + +static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + int ret; + + if (tcpci->data->set_vbus) { + ret = tcpci->data->set_vbus(tcpci, tcpci->data, source, sink); + /* Bypass when ret > 0 */ + if (ret != 0) + return ret < 0 ? ret : 0; + } + + /* Disable both source and sink first before enabling anything */ + + if (!source) { + ret = regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_DISABLE_SRC_VBUS); + if (ret < 0) + return ret; + } + + if (!sink) { + ret = regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_DISABLE_SINK_VBUS); + if (ret < 0) + return ret; + } + + if (source) { + ret = regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_SRC_VBUS_DEFAULT); + if (ret < 0) + return ret; + } + + if (sink) { + ret = regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_SINK_VBUS); + if (ret < 0) + return ret; + } + + return 0; +} + +static int tcpci_pd_transmit(struct tcpc_dev *tcpc, enum tcpm_transmit_type type, + const struct pd_message *msg, unsigned int negotiated_rev) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + u16 header = msg ? le16_to_cpu(msg->header) : 0; + unsigned int reg, cnt; + int ret; + + cnt = msg ? pd_header_cnt(header) * 4 : 0; + /** + * TCPCI spec forbids direct access of TCPC_TX_DATA. + * But, since some of the chipsets offer this capability, + * it's fair to support both. + */ + if (tcpci->data->TX_BUF_BYTE_x_hidden) { + u8 buf[TCPC_TRANSMIT_BUFFER_MAX_LEN] = {0,}; + u8 pos = 0; + + /* Payload + header + TCPC_TX_BYTE_CNT */ + buf[pos++] = cnt + 2; + + if (msg) + memcpy(&buf[pos], &msg->header, sizeof(msg->header)); + + pos += sizeof(header); + + if (cnt > 0) + memcpy(&buf[pos], msg->payload, cnt); + + pos += cnt; + ret = regmap_raw_write(tcpci->regmap, TCPC_TX_BYTE_CNT, buf, pos); + if (ret < 0) + return ret; + } else { + ret = regmap_write(tcpci->regmap, TCPC_TX_BYTE_CNT, cnt + 2); + if (ret < 0) + return ret; + + ret = tcpci_write16(tcpci, TCPC_TX_HDR, header); + if (ret < 0) + return ret; + + if (cnt > 0) { + ret = regmap_raw_write(tcpci->regmap, TCPC_TX_DATA, &msg->payload, cnt); + if (ret < 0) + return ret; + } + } + + /* nRetryCount is 3 in PD2.0 spec where 2 in PD3.0 spec */ + reg = ((negotiated_rev > PD_REV20 ? PD_RETRY_COUNT_3_0_OR_HIGHER : PD_RETRY_COUNT_DEFAULT) + << TCPC_TRANSMIT_RETRY_SHIFT) | (type << TCPC_TRANSMIT_TYPE_SHIFT); + ret = regmap_write(tcpci->regmap, TCPC_TRANSMIT, reg); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_init(struct tcpc_dev *tcpc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned long timeout = jiffies + msecs_to_jiffies(2000); /* XXX */ + unsigned int reg; + int ret; + + while (time_before_eq(jiffies, timeout)) { + ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, ®); + if (ret < 0) + return ret; + if (!(reg & TCPC_POWER_STATUS_UNINIT)) + break; + usleep_range(10000, 20000); + } + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + + ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT); + if (ret < 0) + return ret; + + /* Handle vendor init */ + if (tcpci->data->init) { + ret = tcpci->data->init(tcpci, tcpci->data); + if (ret < 0) + return ret; + } + + /* Clear all events */ + ret = tcpci_write16(tcpci, TCPC_ALERT, 0xffff); + if (ret < 0) + return ret; + + if (tcpci->controls_vbus) + reg = TCPC_POWER_STATUS_VBUS_PRES; + else + reg = 0; + ret = regmap_write(tcpci->regmap, TCPC_POWER_STATUS_MASK, reg); + if (ret < 0) + return ret; + + /* Enable Vbus detection */ + ret = regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_ENABLE_VBUS_DETECT); + if (ret < 0) + return ret; + + reg = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_FAILED | + TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_RX_STATUS | + TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_CC_STATUS; + if (tcpci->controls_vbus) + reg |= TCPC_ALERT_POWER_STATUS; + /* Enable VSAFE0V status interrupt when detecting VSAFE0V is supported */ + if (tcpci->data->vbus_vsafe0v) { + reg |= TCPC_ALERT_EXTENDED_STATUS; + ret = regmap_write(tcpci->regmap, TCPC_EXTENDED_STATUS_MASK, + TCPC_EXTENDED_STATUS_VSAFE0V); + if (ret < 0) + return ret; + } + + tcpci->alert_mask = reg; + + return tcpci_write16(tcpci, TCPC_ALERT_MASK, reg); +} + +irqreturn_t tcpci_irq(struct tcpci *tcpci) +{ + u16 status; + int ret; + unsigned int raw; + + tcpci_read16(tcpci, TCPC_ALERT, &status); + + /* + * Clear alert status for everything except RX_STATUS, which shouldn't + * be cleared until we have successfully retrieved message. + */ + if (status & ~TCPC_ALERT_RX_STATUS) + tcpci_write16(tcpci, TCPC_ALERT, + status & ~TCPC_ALERT_RX_STATUS); + + if (status & TCPC_ALERT_CC_STATUS) + tcpm_cc_change(tcpci->port); + + if (status & TCPC_ALERT_POWER_STATUS) { + regmap_read(tcpci->regmap, TCPC_POWER_STATUS_MASK, &raw); + /* + * If power status mask has been reset, then the TCPC + * has reset. + */ + if (raw == 0xff) + tcpm_tcpc_reset(tcpci->port); + else + tcpm_vbus_change(tcpci->port); + } + + if (status & TCPC_ALERT_RX_STATUS) { + struct pd_message msg; + unsigned int cnt, payload_cnt; + u16 header; + + regmap_read(tcpci->regmap, TCPC_RX_BYTE_CNT, &cnt); + /* + * 'cnt' corresponds to READABLE_BYTE_COUNT in section 4.4.14 + * of the TCPCI spec [Rev 2.0 Ver 1.0 October 2017] and is + * defined in table 4-36 as one greater than the number of + * bytes received. And that number includes the header. So: + */ + if (cnt > 3) + payload_cnt = cnt - (1 + sizeof(msg.header)); + else + payload_cnt = 0; + + tcpci_read16(tcpci, TCPC_RX_HDR, &header); + msg.header = cpu_to_le16(header); + + if (WARN_ON(payload_cnt > sizeof(msg.payload))) + payload_cnt = sizeof(msg.payload); + + if (payload_cnt > 0) + regmap_raw_read(tcpci->regmap, TCPC_RX_DATA, + &msg.payload, payload_cnt); + + /* Read complete, clear RX status alert bit */ + tcpci_write16(tcpci, TCPC_ALERT, TCPC_ALERT_RX_STATUS); + + tcpm_pd_receive(tcpci->port, &msg); + } + + if (tcpci->data->vbus_vsafe0v && (status & TCPC_ALERT_EXTENDED_STATUS)) { + ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &raw); + if (!ret && (raw & TCPC_EXTENDED_STATUS_VSAFE0V)) + tcpm_vbus_change(tcpci->port); + } + + if (status & TCPC_ALERT_RX_HARD_RST) + tcpm_pd_hard_reset(tcpci->port); + + if (status & TCPC_ALERT_TX_SUCCESS) + tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_SUCCESS); + else if (status & TCPC_ALERT_TX_DISCARDED) + tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_DISCARDED); + else if (status & TCPC_ALERT_TX_FAILED) + tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_FAILED); + + return IRQ_RETVAL(status & tcpci->alert_mask); +} +EXPORT_SYMBOL_GPL(tcpci_irq); + +static irqreturn_t _tcpci_irq(int irq, void *dev_id) +{ + struct tcpci_chip *chip = dev_id; + + return tcpci_irq(chip->tcpci); +} + +static const struct regmap_config tcpci_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = 0x7F, /* 0x80 .. 0xFF are vendor defined */ +}; + +static int tcpci_parse_config(struct tcpci *tcpci) +{ + tcpci->controls_vbus = true; /* XXX */ + + tcpci->tcpc.fwnode = device_get_named_child_node(tcpci->dev, + "connector"); + if (!tcpci->tcpc.fwnode) { + dev_err(tcpci->dev, "Can't find connector node.\n"); + return -EINVAL; + } + + return 0; +} + +struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data) +{ + struct tcpci *tcpci; + int err; + + tcpci = devm_kzalloc(dev, sizeof(*tcpci), GFP_KERNEL); + if (!tcpci) + return ERR_PTR(-ENOMEM); + + tcpci->dev = dev; + tcpci->data = data; + tcpci->regmap = data->regmap; + + tcpci->tcpc.init = tcpci_init; + tcpci->tcpc.get_vbus = tcpci_get_vbus; + tcpci->tcpc.set_vbus = tcpci_set_vbus; + tcpci->tcpc.set_cc = tcpci_set_cc; + tcpci->tcpc.apply_rc = tcpci_apply_rc; + tcpci->tcpc.get_cc = tcpci_get_cc; + tcpci->tcpc.set_polarity = tcpci_set_polarity; + tcpci->tcpc.set_vconn = tcpci_set_vconn; + tcpci->tcpc.start_toggling = tcpci_start_toggling; + + tcpci->tcpc.set_pd_rx = tcpci_set_pd_rx; + tcpci->tcpc.set_roles = tcpci_set_roles; + tcpci->tcpc.pd_transmit = tcpci_pd_transmit; + tcpci->tcpc.set_bist_data = tcpci_set_bist_data; + tcpci->tcpc.enable_frs = tcpci_enable_frs; + tcpci->tcpc.frs_sourcing_vbus = tcpci_frs_sourcing_vbus; + tcpci->tcpc.set_partner_usb_comm_capable = tcpci_set_partner_usb_comm_capable; + + if (tcpci->data->check_contaminant) + tcpci->tcpc.check_contaminant = tcpci_check_contaminant; + + if (tcpci->data->auto_discharge_disconnect) { + tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge; + tcpci->tcpc.set_auto_vbus_discharge_threshold = + tcpci_set_auto_vbus_discharge_threshold; + regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_POWER_CTRL_BLEED_DISCHARGE, + TCPC_POWER_CTRL_BLEED_DISCHARGE); + } + + if (tcpci->data->vbus_vsafe0v) + tcpci->tcpc.is_vbus_vsafe0v = tcpci_is_vbus_vsafe0v; + + err = tcpci_parse_config(tcpci); + if (err < 0) + return ERR_PTR(err); + + tcpci->port = tcpm_register_port(tcpci->dev, &tcpci->tcpc); + if (IS_ERR(tcpci->port)) { + fwnode_handle_put(tcpci->tcpc.fwnode); + return ERR_CAST(tcpci->port); + } + + return tcpci; +} +EXPORT_SYMBOL_GPL(tcpci_register_port); + +void tcpci_unregister_port(struct tcpci *tcpci) +{ + tcpm_unregister_port(tcpci->port); + fwnode_handle_put(tcpci->tcpc.fwnode); +} +EXPORT_SYMBOL_GPL(tcpci_unregister_port); + +static int tcpci_probe(struct i2c_client *client) +{ + struct tcpci_chip *chip; + int err; + u16 val = 0; + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->data.regmap = devm_regmap_init_i2c(client, &tcpci_regmap_config); + if (IS_ERR(chip->data.regmap)) + return PTR_ERR(chip->data.regmap); + + i2c_set_clientdata(client, chip); + + /* Disable chip interrupts before requesting irq */ + err = regmap_raw_write(chip->data.regmap, TCPC_ALERT_MASK, &val, + sizeof(u16)); + if (err < 0) + return err; + + chip->tcpci = tcpci_register_port(&client->dev, &chip->data); + if (IS_ERR(chip->tcpci)) + return PTR_ERR(chip->tcpci); + + err = devm_request_threaded_irq(&client->dev, client->irq, NULL, + _tcpci_irq, + IRQF_SHARED | IRQF_ONESHOT | IRQF_TRIGGER_LOW, + dev_name(&client->dev), chip); + if (err < 0) { + tcpci_unregister_port(chip->tcpci); + return err; + } + + return 0; +} + +static void tcpci_remove(struct i2c_client *client) +{ + struct tcpci_chip *chip = i2c_get_clientdata(client); + int err; + + /* Disable chip interrupts before unregistering port */ + err = tcpci_write16(chip->tcpci, TCPC_ALERT_MASK, 0); + if (err < 0) + dev_warn(&client->dev, "Failed to disable irqs (%pe)\n", ERR_PTR(err)); + + tcpci_unregister_port(chip->tcpci); +} + +static const struct i2c_device_id tcpci_id[] = { + { "tcpci", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tcpci_id); + +#ifdef CONFIG_OF +static const struct of_device_id tcpci_of_match[] = { + { .compatible = "nxp,ptn5110", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tcpci_of_match); +#endif + +static struct i2c_driver tcpci_i2c_driver = { + .driver = { + .name = "tcpci", + .of_match_table = of_match_ptr(tcpci_of_match), + }, + .probe = tcpci_probe, + .remove = tcpci_remove, + .id_table = tcpci_id, +}; +module_i2c_driver(tcpci_i2c_driver); + +MODULE_DESCRIPTION("USB Type-C Port Controller Interface driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.h b/drivers/usb/typec/tcpm/tcpci_maxim.h new file mode 100644 index 0000000000..2c1c4d161b --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci_maxim.h @@ -0,0 +1,89 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2022 Google, Inc + * + * MAXIM TCPC header file. + */ +#ifndef TCPCI_MAXIM_H_ +#define TCPCI_MAXIM_H_ + +#define VENDOR_CC_STATUS2 0x85 +#define CC1_VUFP_RD0P5 BIT(1) +#define CC2_VUFP_RD0P5 BIT(5) +#define TCPC_VENDOR_FLADC_STATUS 0x89 + +#define TCPC_VENDOR_CC_CTRL1 0x8c +#define CCCONNDRY BIT(7) +#define CCCOMPEN BIT(5) + +#define TCPC_VENDOR_CC_CTRL2 0x8d +#define SBUOVPDIS BIT(7) +#define CCOVPDIS BIT(6) +#define SBURPCTRL BIT(5) +#define CCLPMODESEL_MASK GENMASK(4, 3) +#define ULTRA_LOW_POWER_MODE BIT(3) +#define CCRPCTRL_MASK GENMASK(2, 0) +#define UA_1_SRC 1 +#define UA_80_SRC 3 + +#define TCPC_VENDOR_CC_CTRL3 0x8e +#define CCWTRDEB_MASK GENMASK(7, 6) +#define CCWTRDEB_SHIFT 6 +#define CCWTRDEB_1MS 1 +#define CCWTRSEL_MASK GENMASK(5, 3) +#define CCWTRSEL_SHIFT 3 +#define CCWTRSEL_1V 0x4 +#define CCLADDERDIS BIT(2) +#define WTRCYCLE_MASK BIT(0) +#define WTRCYCLE_SHIFT 0 +#define WTRCYCLE_2_4_S 0 +#define WTRCYCLE_4_8_S 1 + +#define TCPC_VENDOR_ADC_CTRL1 0x91 +#define ADCINSEL_MASK GENMASK(7, 5) +#define ADC_CHANNEL_OFFSET 5 +#define ADCEN BIT(0) + +enum contamiant_state { + NOT_DETECTED, + DETECTED, + SINK, +}; + +/* + * @potential_contaminant: + * Last returned result to tcpm indicating whether the TCPM port + * has potential contaminant. + */ +struct max_tcpci_chip { + struct tcpci_data data; + struct tcpci *tcpci; + struct device *dev; + struct i2c_client *client; + struct tcpm_port *port; + enum contamiant_state contaminant_state; +}; + +static inline int max_tcpci_read16(struct max_tcpci_chip *chip, unsigned int reg, u16 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16)); +} + +static inline int max_tcpci_write16(struct max_tcpci_chip *chip, unsigned int reg, u16 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16)); +} + +static inline int max_tcpci_read8(struct max_tcpci_chip *chip, unsigned int reg, u8 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8)); +} + +static inline int max_tcpci_write8(struct max_tcpci_chip *chip, unsigned int reg, u8 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8)); +} + +bool max_contaminant_is_contaminant(struct max_tcpci_chip *chip, bool disconnect_while_debounce); + +#endif // TCPCI_MAXIM_H_ diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c new file mode 100644 index 0000000000..9454b12a07 --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c @@ -0,0 +1,519 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 - 2022, Google LLC + * + * MAXIM TCPCI based TCPC driver + */ + +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/usb/pd.h> +#include <linux/usb/tcpci.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec.h> + +#include "tcpci_maxim.h" + +#define PD_ACTIVITY_TIMEOUT_MS 10000 + +#define TCPC_VENDOR_ALERT 0x80 +#define TCPC_VENDOR_USBSW_CTRL 0x93 +#define TCPC_VENDOR_USBSW_CTRL_ENABLE_USB_DATA 0x9 +#define TCPC_VENDOR_USBSW_CTRL_DISABLE_USB_DATA 0 + +#define TCPC_RECEIVE_BUFFER_COUNT_OFFSET 0 +#define TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET 1 +#define TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET 2 + +/* + * LongMessage not supported, hence 32 bytes for buf to be read from RECEIVE_BUFFER. + * DEVICE_CAPABILITIES_2.LongMessage = 0, the value in READABLE_BYTE_COUNT reg shall be + * less than or equal to 31. Since, RECEIVE_BUFFER len = 31 + 1(READABLE_BYTE_COUNT). + */ +#define TCPC_RECEIVE_BUFFER_LEN 32 + +#define MAX_BUCK_BOOST_SID 0x69 +#define MAX_BUCK_BOOST_OP 0xb9 +#define MAX_BUCK_BOOST_OFF 0 +#define MAX_BUCK_BOOST_SOURCE 0xa +#define MAX_BUCK_BOOST_SINK 0x5 + +static const struct regmap_range max_tcpci_tcpci_range[] = { + regmap_reg_range(0x00, 0x95) +}; + +static const struct regmap_access_table max_tcpci_tcpci_write_table = { + .yes_ranges = max_tcpci_tcpci_range, + .n_yes_ranges = ARRAY_SIZE(max_tcpci_tcpci_range), +}; + +static const struct regmap_config max_tcpci_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x95, + .wr_table = &max_tcpci_tcpci_write_table, +}; + +static struct max_tcpci_chip *tdata_to_max_tcpci(struct tcpci_data *tdata) +{ + return container_of(tdata, struct max_tcpci_chip, data); +} + +static void max_tcpci_init_regs(struct max_tcpci_chip *chip) +{ + u16 alert_mask = 0; + int ret; + + ret = max_tcpci_write16(chip, TCPC_ALERT, 0xffff); + if (ret < 0) { + dev_err(chip->dev, "Error writing to TCPC_ALERT ret:%d\n", ret); + return; + } + + ret = max_tcpci_write16(chip, TCPC_VENDOR_ALERT, 0xffff); + if (ret < 0) { + dev_err(chip->dev, "Error writing to TCPC_VENDOR_ALERT ret:%d\n", ret); + return; + } + + ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, 0xff); + if (ret < 0) { + dev_err(chip->dev, "Unable to clear TCPC_ALERT_EXTENDED ret:%d\n", ret); + return; + } + + /* Enable VSAFE0V detection */ + ret = max_tcpci_write8(chip, TCPC_EXTENDED_STATUS_MASK, TCPC_EXTENDED_STATUS_VSAFE0V); + if (ret < 0) { + dev_err(chip->dev, "Unable to unmask TCPC_EXTENDED_STATUS_VSAFE0V ret:%d\n", ret); + return; + } + + alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED | + TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS | + TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS | + /* Enable Extended alert for detecting Fast Role Swap Signal */ + TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS; + + ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask); + if (ret < 0) { + dev_err(chip->dev, + "Error enabling TCPC_ALERT: TCPC_ALERT_MASK write failed ret:%d\n", ret); + return; + } + + /* Enable vbus voltage monitoring and voltage alerts */ + ret = max_tcpci_write8(chip, TCPC_POWER_CTRL, 0); + if (ret < 0) { + dev_err(chip->dev, "Error writing to TCPC_POWER_CTRL ret:%d\n", ret); + return; + } + + ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED_MASK, TCPC_SINK_FAST_ROLE_SWAP); + if (ret < 0) + return; +} + +static void process_rx(struct max_tcpci_chip *chip, u16 status) +{ + struct pd_message msg; + u8 count, frame_type, rx_buf[TCPC_RECEIVE_BUFFER_LEN]; + int ret, payload_index; + u8 *rx_buf_ptr; + + /* + * READABLE_BYTE_COUNT: Indicates the number of bytes in the RX_BUF_BYTE_x registers + * plus one (for the RX_BUF_FRAME_TYPE) Table 4-36. + * Read the count and frame type. + */ + ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, 2); + if (ret < 0) { + dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d\n", ret); + return; + } + + count = rx_buf[TCPC_RECEIVE_BUFFER_COUNT_OFFSET]; + frame_type = rx_buf[TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET]; + + if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) { + max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS); + dev_err(chip->dev, "%s\n", count == 0 ? "error: count is 0" : + "error frame_type is not SOP"); + return; + } + + if (count > sizeof(struct pd_message) || count + 1 > TCPC_RECEIVE_BUFFER_LEN) { + dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d\n", count); + return; + } + + /* + * Read count + 1 as RX_BUF_BYTE_x is hidden and can only be read through + * TCPC_RX_BYTE_CNT + */ + count += 1; + ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, count); + if (ret < 0) { + dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d\n", ret); + return; + } + + rx_buf_ptr = rx_buf + TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET; + msg.header = cpu_to_le16(*(u16 *)rx_buf_ptr); + rx_buf_ptr = rx_buf_ptr + sizeof(msg.header); + for (payload_index = 0; payload_index < pd_header_cnt_le(msg.header); payload_index++, + rx_buf_ptr += sizeof(msg.payload[0])) + msg.payload[payload_index] = cpu_to_le32(*(u32 *)rx_buf_ptr); + + /* + * Read complete, clear RX status alert bit. + * Clear overflow as well if set. + */ + ret = max_tcpci_write16(chip, TCPC_ALERT, status & TCPC_ALERT_RX_BUF_OVF ? + TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF : + TCPC_ALERT_RX_STATUS); + if (ret < 0) + return; + + tcpm_pd_receive(chip->port, &msg); +} + +static int max_tcpci_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, bool source, bool sink) +{ + struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata); + u8 buffer_source[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SOURCE}; + u8 buffer_sink[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SINK}; + u8 buffer_none[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_OFF}; + struct i2c_client *i2c = chip->client; + int ret; + + struct i2c_msg msgs[] = { + { + .addr = MAX_BUCK_BOOST_SID, + .flags = i2c->flags & I2C_M_TEN, + .len = 2, + .buf = source ? buffer_source : sink ? buffer_sink : buffer_none, + }, + }; + + if (source && sink) { + dev_err(chip->dev, "Both source and sink set\n"); + return -EINVAL; + } + + ret = i2c_transfer(i2c->adapter, msgs, 1); + + return ret < 0 ? ret : 1; +} + +static void process_power_status(struct max_tcpci_chip *chip) +{ + u8 pwr_status; + int ret; + + ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &pwr_status); + if (ret < 0) + return; + + if (pwr_status == 0xff) + max_tcpci_init_regs(chip); + else if (pwr_status & TCPC_POWER_STATUS_SOURCING_VBUS) + tcpm_sourcing_vbus(chip->port); + else + tcpm_vbus_change(chip->port); +} + +static void max_tcpci_frs_sourcing_vbus(struct tcpci *tcpci, struct tcpci_data *tdata) +{ + /* + * For Fast Role Swap case, Boost turns on autonomously without + * AP intervention, but, needs AP to enable source mode explicitly + * for AP to regain control. + */ + max_tcpci_set_vbus(tcpci, tdata, true, false); +} + +static void process_tx(struct max_tcpci_chip *chip, u16 status) +{ + if (status & TCPC_ALERT_TX_SUCCESS) + tcpm_pd_transmit_complete(chip->port, TCPC_TX_SUCCESS); + else if (status & TCPC_ALERT_TX_DISCARDED) + tcpm_pd_transmit_complete(chip->port, TCPC_TX_DISCARDED); + else if (status & TCPC_ALERT_TX_FAILED) + tcpm_pd_transmit_complete(chip->port, TCPC_TX_FAILED); + + /* Reinit regs as Hard reset sets them to default value */ + if ((status & TCPC_ALERT_TX_SUCCESS) && (status & TCPC_ALERT_TX_FAILED)) + max_tcpci_init_regs(chip); +} + +/* Enable USB switches when partner is USB communications capable */ +static void max_tcpci_set_partner_usb_comm_capable(struct tcpci *tcpci, struct tcpci_data *data, + bool capable) +{ + struct max_tcpci_chip *chip = tdata_to_max_tcpci(data); + int ret; + + ret = max_tcpci_write8(chip, TCPC_VENDOR_USBSW_CTRL, capable ? + TCPC_VENDOR_USBSW_CTRL_ENABLE_USB_DATA : + TCPC_VENDOR_USBSW_CTRL_DISABLE_USB_DATA); + + if (ret < 0) + dev_err(chip->dev, "Failed to enable USB switches"); +} + +static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status) +{ + u16 mask; + int ret; + u8 reg_status; + + /* + * Clear alert status for everything except RX_STATUS, which shouldn't + * be cleared until we have successfully retrieved message. + */ + if (status & ~TCPC_ALERT_RX_STATUS) { + mask = status & TCPC_ALERT_RX_BUF_OVF ? + status & ~(TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF) : + status & ~TCPC_ALERT_RX_STATUS; + ret = max_tcpci_write16(chip, TCPC_ALERT, mask); + if (ret < 0) { + dev_err(chip->dev, "ALERT clear failed\n"); + return ret; + } + } + + if (status & TCPC_ALERT_RX_BUF_OVF && !(status & TCPC_ALERT_RX_STATUS)) { + ret = max_tcpci_write16(chip, TCPC_ALERT, (TCPC_ALERT_RX_STATUS | + TCPC_ALERT_RX_BUF_OVF)); + if (ret < 0) { + dev_err(chip->dev, "ALERT clear failed\n"); + return ret; + } + } + + if (status & TCPC_ALERT_EXTND) { + ret = max_tcpci_read8(chip, TCPC_ALERT_EXTENDED, ®_status); + if (ret < 0) + return ret; + + ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, reg_status); + if (ret < 0) + return ret; + + if (reg_status & TCPC_SINK_FAST_ROLE_SWAP) { + dev_info(chip->dev, "FRS Signal\n"); + tcpm_sink_frs(chip->port); + } + } + + if (status & TCPC_ALERT_EXTENDED_STATUS) { + ret = max_tcpci_read8(chip, TCPC_EXTENDED_STATUS, (u8 *)®_status); + if (ret >= 0 && (reg_status & TCPC_EXTENDED_STATUS_VSAFE0V)) + tcpm_vbus_change(chip->port); + } + + if (status & TCPC_ALERT_RX_STATUS) + process_rx(chip, status); + + if (status & TCPC_ALERT_VBUS_DISCNCT) + tcpm_vbus_change(chip->port); + + if (status & TCPC_ALERT_CC_STATUS) { + if (chip->contaminant_state == DETECTED || tcpm_port_is_toggling(chip->port)) { + if (!max_contaminant_is_contaminant(chip, false)) + tcpm_port_clean(chip->port); + } else { + tcpm_cc_change(chip->port); + } + } + + if (status & TCPC_ALERT_POWER_STATUS) + process_power_status(chip); + + if (status & TCPC_ALERT_RX_HARD_RST) { + tcpm_pd_hard_reset(chip->port); + max_tcpci_init_regs(chip); + } + + if (status & TCPC_ALERT_TX_SUCCESS || status & TCPC_ALERT_TX_DISCARDED || status & + TCPC_ALERT_TX_FAILED) + process_tx(chip, status); + + return IRQ_HANDLED; +} + +static irqreturn_t max_tcpci_irq(int irq, void *dev_id) +{ + struct max_tcpci_chip *chip = dev_id; + u16 status; + irqreturn_t irq_return = IRQ_HANDLED; + int ret; + + if (!chip->port) + return IRQ_HANDLED; + + ret = max_tcpci_read16(chip, TCPC_ALERT, &status); + if (ret < 0) { + dev_err(chip->dev, "ALERT read failed\n"); + return ret; + } + while (status) { + irq_return = _max_tcpci_irq(chip, status); + /* Do not return if the ALERT is already set. */ + ret = max_tcpci_read16(chip, TCPC_ALERT, &status); + if (ret < 0) + break; + } + + return irq_return; +} + +static irqreturn_t max_tcpci_isr(int irq, void *dev_id) +{ + struct max_tcpci_chip *chip = dev_id; + + pm_wakeup_event(chip->dev, PD_ACTIVITY_TIMEOUT_MS); + + if (!chip->port) + return IRQ_HANDLED; + + return IRQ_WAKE_THREAD; +} + +static int max_tcpci_init_alert(struct max_tcpci_chip *chip, struct i2c_client *client) +{ + int ret; + + ret = devm_request_threaded_irq(chip->dev, client->irq, max_tcpci_isr, max_tcpci_irq, + (IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev), + chip); + + if (ret < 0) + return ret; + + enable_irq_wake(client->irq); + return 0; +} + +static int max_tcpci_start_toggling(struct tcpci *tcpci, struct tcpci_data *tdata, + enum typec_cc_status cc) +{ + struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata); + + max_tcpci_init_regs(chip); + + return 0; +} + +static int tcpci_init(struct tcpci *tcpci, struct tcpci_data *data) +{ + /* + * Generic TCPCI overwrites the regs once this driver initializes + * them. Prevent this by returning -1. + */ + return -1; +} + +static void max_tcpci_check_contaminant(struct tcpci *tcpci, struct tcpci_data *tdata) +{ + struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata); + + if (!max_contaminant_is_contaminant(chip, true)) + tcpm_port_clean(chip->port); +} + +static int max_tcpci_probe(struct i2c_client *client) +{ + int ret; + struct max_tcpci_chip *chip; + u8 power_status; + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->client = client; + chip->data.regmap = devm_regmap_init_i2c(client, &max_tcpci_regmap_config); + if (IS_ERR(chip->data.regmap)) { + dev_err(&client->dev, "Regmap init failed\n"); + return PTR_ERR(chip->data.regmap); + } + + chip->dev = &client->dev; + i2c_set_clientdata(client, chip); + + ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &power_status); + if (ret < 0) + return ret; + + /* Chip level tcpci callbacks */ + chip->data.set_vbus = max_tcpci_set_vbus; + chip->data.start_drp_toggling = max_tcpci_start_toggling; + chip->data.TX_BUF_BYTE_x_hidden = true; + chip->data.init = tcpci_init; + chip->data.frs_sourcing_vbus = max_tcpci_frs_sourcing_vbus; + chip->data.auto_discharge_disconnect = true; + chip->data.vbus_vsafe0v = true; + chip->data.set_partner_usb_comm_capable = max_tcpci_set_partner_usb_comm_capable; + chip->data.check_contaminant = max_tcpci_check_contaminant; + + max_tcpci_init_regs(chip); + chip->tcpci = tcpci_register_port(chip->dev, &chip->data); + if (IS_ERR(chip->tcpci)) { + dev_err(&client->dev, "TCPCI port registration failed\n"); + return PTR_ERR(chip->tcpci); + } + chip->port = tcpci_get_tcpm_port(chip->tcpci); + ret = max_tcpci_init_alert(chip, client); + if (ret < 0) + goto unreg_port; + + device_init_wakeup(chip->dev, true); + return 0; + +unreg_port: + tcpci_unregister_port(chip->tcpci); + + return ret; +} + +static void max_tcpci_remove(struct i2c_client *client) +{ + struct max_tcpci_chip *chip = i2c_get_clientdata(client); + + if (!IS_ERR_OR_NULL(chip->tcpci)) + tcpci_unregister_port(chip->tcpci); +} + +static const struct i2c_device_id max_tcpci_id[] = { + { "maxtcpc", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max_tcpci_id); + +#ifdef CONFIG_OF +static const struct of_device_id max_tcpci_of_match[] = { + { .compatible = "maxim,max33359", }, + {}, +}; +MODULE_DEVICE_TABLE(of, max_tcpci_of_match); +#endif + +static struct i2c_driver max_tcpci_i2c_driver = { + .driver = { + .name = "maxtcpc", + .of_match_table = of_match_ptr(max_tcpci_of_match), + }, + .probe = max_tcpci_probe, + .remove = max_tcpci_remove, + .id_table = max_tcpci_id, +}; +module_i2c_driver(max_tcpci_i2c_driver); + +MODULE_AUTHOR("Badhri Jagan Sridharan <badhri@google.com>"); +MODULE_DESCRIPTION("Maxim TCPCI based USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c new file mode 100644 index 0000000000..02b7fd3022 --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: ChiYuan Huang <cy_huang@richtek.com> + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/usb/tcpci.h> +#include <linux/usb/tcpm.h> + +#define MT6360_REG_PHYCTRL1 0x80 +#define MT6360_REG_PHYCTRL3 0x82 +#define MT6360_REG_PHYCTRL7 0x86 +#define MT6360_REG_VCONNCTRL1 0x8C +#define MT6360_REG_MODECTRL2 0x8F +#define MT6360_REG_SWRESET 0xA0 +#define MT6360_REG_DEBCTRL1 0xA1 +#define MT6360_REG_DRPCTRL1 0xA2 +#define MT6360_REG_DRPCTRL2 0xA3 +#define MT6360_REG_I2CTORST 0xBF +#define MT6360_REG_PHYCTRL11 0xCA +#define MT6360_REG_RXCTRL1 0xCE +#define MT6360_REG_RXCTRL2 0xCF +#define MT6360_REG_CTDCTRL2 0xEC + +/* MT6360_REG_VCONNCTRL1 */ +#define MT6360_VCONNCL_ENABLE BIT(0) +/* MT6360_REG_RXCTRL2 */ +#define MT6360_OPEN40M_ENABLE BIT(7) +/* MT6360_REG_CTDCTRL2 */ +#define MT6360_RPONESHOT_ENABLE BIT(6) + +struct mt6360_tcpc_info { + struct tcpci_data tdata; + struct tcpci *tcpci; + struct device *dev; + int irq; +}; + +static inline int mt6360_tcpc_write16(struct regmap *regmap, + unsigned int reg, u16 val) +{ + return regmap_raw_write(regmap, reg, &val, sizeof(u16)); +} + +static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata) +{ + struct regmap *regmap = tdata->regmap; + int ret; + + ret = regmap_write(regmap, MT6360_REG_SWRESET, 0x01); + if (ret) + return ret; + + /* after reset command, wait 1~2ms to wait IC action */ + usleep_range(1000, 2000); + + /* write all alert to masked */ + ret = mt6360_tcpc_write16(regmap, TCPC_ALERT_MASK, 0); + if (ret) + return ret; + + /* config I2C timeout reset enable , and timeout to 200ms */ + ret = regmap_write(regmap, MT6360_REG_I2CTORST, 0x8F); + if (ret) + return ret; + + /* config CC Detect Debounce : 26.7*val us */ + ret = regmap_write(regmap, MT6360_REG_DEBCTRL1, 0x10); + if (ret) + return ret; + + /* DRP Toggle Cycle : 51.2 + 6.4*val ms */ + ret = regmap_write(regmap, MT6360_REG_DRPCTRL1, 4); + if (ret) + return ret; + + /* DRP Duyt Ctrl : dcSRC: /1024 */ + ret = mt6360_tcpc_write16(regmap, MT6360_REG_DRPCTRL2, 330); + if (ret) + return ret; + + /* Enable VCONN Current Limit function */ + ret = regmap_update_bits(regmap, MT6360_REG_VCONNCTRL1, MT6360_VCONNCL_ENABLE, + MT6360_VCONNCL_ENABLE); + if (ret) + return ret; + + /* Enable cc open 40ms when pmic send vsysuv signal */ + ret = regmap_update_bits(regmap, MT6360_REG_RXCTRL2, MT6360_OPEN40M_ENABLE, + MT6360_OPEN40M_ENABLE); + if (ret) + return ret; + + /* Enable Rpdet oneshot detection */ + ret = regmap_update_bits(regmap, MT6360_REG_CTDCTRL2, MT6360_RPONESHOT_ENABLE, + MT6360_RPONESHOT_ENABLE); + if (ret) + return ret; + + /* BMC PHY */ + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL1, 0x3A70); + if (ret) + return ret; + + ret = regmap_write(regmap, MT6360_REG_PHYCTRL3, 0x82); + if (ret) + return ret; + + ret = regmap_write(regmap, MT6360_REG_PHYCTRL7, 0x36); + if (ret) + return ret; + + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL11, 0x3C60); + if (ret) + return ret; + + ret = regmap_write(regmap, MT6360_REG_RXCTRL1, 0xE8); + if (ret) + return ret; + + /* Set shipping mode off, AUTOIDLE on */ + return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A); +} + +static irqreturn_t mt6360_irq(int irq, void *dev_id) +{ + struct mt6360_tcpc_info *mti = dev_id; + + return tcpci_irq(mti->tcpci); +} + +static int mt6360_tcpc_probe(struct platform_device *pdev) +{ + struct mt6360_tcpc_info *mti; + int ret; + + mti = devm_kzalloc(&pdev->dev, sizeof(*mti), GFP_KERNEL); + if (!mti) + return -ENOMEM; + + mti->dev = &pdev->dev; + + mti->tdata.regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!mti->tdata.regmap) { + dev_err(&pdev->dev, "Failed to get parent regmap\n"); + return -ENODEV; + } + + mti->irq = platform_get_irq_byname(pdev, "PD_IRQB"); + if (mti->irq < 0) + return mti->irq; + + mti->tdata.init = mt6360_tcpc_init; + mti->tcpci = tcpci_register_port(&pdev->dev, &mti->tdata); + if (IS_ERR(mti->tcpci)) { + dev_err(&pdev->dev, "Failed to register tcpci port\n"); + return PTR_ERR(mti->tcpci); + } + + ret = devm_request_threaded_irq(mti->dev, mti->irq, NULL, mt6360_irq, IRQF_ONESHOT, + dev_name(&pdev->dev), mti); + if (ret) { + dev_err(mti->dev, "Failed to register irq\n"); + tcpci_unregister_port(mti->tcpci); + return ret; + } + + device_init_wakeup(&pdev->dev, true); + platform_set_drvdata(pdev, mti); + + return 0; +} + +static void mt6360_tcpc_remove(struct platform_device *pdev) +{ + struct mt6360_tcpc_info *mti = platform_get_drvdata(pdev); + + disable_irq(mti->irq); + tcpci_unregister_port(mti->tcpci); +} + +static int __maybe_unused mt6360_tcpc_suspend(struct device *dev) +{ + struct mt6360_tcpc_info *mti = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(mti->irq); + + return 0; +} + +static int __maybe_unused mt6360_tcpc_resume(struct device *dev) +{ + struct mt6360_tcpc_info *mti = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(mti->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(mt6360_tcpc_pm_ops, mt6360_tcpc_suspend, mt6360_tcpc_resume); + +static const struct of_device_id __maybe_unused mt6360_tcpc_of_id[] = { + { .compatible = "mediatek,mt6360-tcpc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt6360_tcpc_of_id); + +static struct platform_driver mt6360_tcpc_driver = { + .driver = { + .name = "mt6360-tcpc", + .pm = &mt6360_tcpc_pm_ops, + .of_match_table = mt6360_tcpc_of_id, + }, + .probe = mt6360_tcpc_probe, + .remove_new = mt6360_tcpc_remove, +}; +module_platform_driver(mt6360_tcpc_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("MT6360 USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/tcpm/tcpci_mt6370.c b/drivers/usb/typec/tcpm/tcpci_mt6370.c new file mode 100644 index 0000000000..9cda1005ef --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci_mt6370.c @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Richtek Technology Corp. + * + * Author: ChiYuan Huang <cy_huang@richtek.com> + */ + +#include <linux/bits.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeup.h> +#include <linux/pm_wakeirq.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/tcpci.h> +#include <linux/usb/tcpm.h> + +#define MT6370_REG_SYSCTRL8 0x9B + +#define MT6370_AUTOIDLE_MASK BIT(3) + +#define MT6370_VENDOR_ID 0x29CF +#define MT6370_TCPC_DID_A 0x2170 + +struct mt6370_priv { + struct device *dev; + struct regulator *vbus; + struct tcpci *tcpci; + struct tcpci_data tcpci_data; +}; + +static const struct reg_sequence mt6370_reg_init[] = { + REG_SEQ(0xA0, 0x1, 1000), + REG_SEQ(0x81, 0x38, 0), + REG_SEQ(0x82, 0x82, 0), + REG_SEQ(0xBA, 0xFC, 0), + REG_SEQ(0xBB, 0x50, 0), + REG_SEQ(0x9E, 0x8F, 0), + REG_SEQ(0xA1, 0x5, 0), + REG_SEQ(0xA2, 0x4, 0), + REG_SEQ(0xA3, 0x4A, 0), + REG_SEQ(0xA4, 0x01, 0), + REG_SEQ(0x95, 0x01, 0), + REG_SEQ(0x80, 0x71, 0), + REG_SEQ(0x9B, 0x3A, 1000), +}; + +static int mt6370_tcpc_init(struct tcpci *tcpci, struct tcpci_data *data) +{ + u16 did; + int ret; + + ret = regmap_register_patch(data->regmap, mt6370_reg_init, + ARRAY_SIZE(mt6370_reg_init)); + if (ret) + return ret; + + ret = regmap_raw_read(data->regmap, TCPC_BCD_DEV, &did, sizeof(u16)); + if (ret) + return ret; + + if (did == MT6370_TCPC_DID_A) + return regmap_write(data->regmap, TCPC_FAULT_CTRL, 0x80); + + return 0; +} + +static int mt6370_tcpc_set_vconn(struct tcpci *tcpci, struct tcpci_data *data, + bool enable) +{ + return regmap_update_bits(data->regmap, MT6370_REG_SYSCTRL8, + MT6370_AUTOIDLE_MASK, + enable ? 0 : MT6370_AUTOIDLE_MASK); +} + +static int mt6370_tcpc_set_vbus(struct tcpci *tcpci, struct tcpci_data *data, + bool source, bool sink) +{ + struct mt6370_priv *priv = container_of(data, struct mt6370_priv, + tcpci_data); + int ret; + + ret = regulator_is_enabled(priv->vbus); + if (ret < 0) + return ret; + + if (ret && !source) + return regulator_disable(priv->vbus); + + if (!ret && source) + return regulator_enable(priv->vbus); + + return 0; +} + +static irqreturn_t mt6370_irq_handler(int irq, void *dev_id) +{ + struct mt6370_priv *priv = dev_id; + + return tcpci_irq(priv->tcpci); +} + +static int mt6370_check_vendor_info(struct mt6370_priv *priv) +{ + struct regmap *regmap = priv->tcpci_data.regmap; + u16 vid; + int ret; + + ret = regmap_raw_read(regmap, TCPC_VENDOR_ID, &vid, sizeof(u16)); + if (ret) + return ret; + + if (vid != MT6370_VENDOR_ID) + return dev_err_probe(priv->dev, -ENODEV, + "Vendor ID not correct 0x%02x\n", vid); + + return 0; +} + +static void mt6370_unregister_tcpci_port(void *tcpci) +{ + tcpci_unregister_port(tcpci); +} + +static int mt6370_tcpc_probe(struct platform_device *pdev) +{ + struct mt6370_priv *priv; + struct device *dev = &pdev->dev; + int irq, ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + + priv->tcpci_data.regmap = dev_get_regmap(dev->parent, NULL); + if (!priv->tcpci_data.regmap) + return dev_err_probe(dev, -ENODEV, "Failed to init regmap\n"); + + ret = mt6370_check_vendor_info(priv); + if (ret) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* Assign TCPCI feature and ops */ + priv->tcpci_data.auto_discharge_disconnect = 1; + priv->tcpci_data.init = mt6370_tcpc_init; + priv->tcpci_data.set_vconn = mt6370_tcpc_set_vconn; + + priv->vbus = devm_regulator_get_optional(dev, "vbus"); + if (!IS_ERR(priv->vbus)) + priv->tcpci_data.set_vbus = mt6370_tcpc_set_vbus; + + priv->tcpci = tcpci_register_port(dev, &priv->tcpci_data); + if (IS_ERR(priv->tcpci)) + return dev_err_probe(dev, PTR_ERR(priv->tcpci), + "Failed to register tcpci port\n"); + + ret = devm_add_action_or_reset(dev, mt6370_unregister_tcpci_port, priv->tcpci); + if (ret) + return ret; + + ret = devm_request_threaded_irq(dev, irq, NULL, mt6370_irq_handler, + IRQF_ONESHOT, dev_name(dev), priv); + if (ret) + return dev_err_probe(dev, ret, "Failed to allocate irq\n"); + + device_init_wakeup(dev, true); + dev_pm_set_wake_irq(dev, irq); + + return 0; +} + +static void mt6370_tcpc_remove(struct platform_device *pdev) +{ + dev_pm_clear_wake_irq(&pdev->dev); + device_init_wakeup(&pdev->dev, false); +} + +static const struct of_device_id mt6370_tcpc_devid_table[] = { + { .compatible = "mediatek,mt6370-tcpc" }, + {} +}; +MODULE_DEVICE_TABLE(of, mt6370_tcpc_devid_table); + +static struct platform_driver mt6370_tcpc_driver = { + .driver = { + .name = "mt6370-tcpc", + .of_match_table = mt6370_tcpc_devid_table, + }, + .probe = mt6370_tcpc_probe, + .remove_new = mt6370_tcpc_remove, +}; +module_platform_driver(mt6370_tcpc_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("MT6370 USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c new file mode 100644 index 0000000000..17ebc5fb68 --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Richtek Technology Corporation + * + * Richtek RT1711H Type-C Chip Driver + */ + +#include <linux/bits.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/gpio/consumer.h> +#include <linux/usb/tcpci.h> +#include <linux/usb/tcpm.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#define RT1711H_VID 0x29CF +#define RT1711H_PID 0x1711 +#define RT1711H_DID 0x2171 +#define RT1715_DID 0x2173 + +#define RT1711H_PHYCTRL1 0x80 +#define RT1711H_PHYCTRL2 0x81 + +#define RT1711H_RTCTRL4 0x93 +/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */ +#define RT1711H_BMCIO_RXDZSEL BIT(0) + +#define RT1711H_RTCTRL8 0x9B +/* Autoidle timeout = (tout * 2 + 1) * 6.4ms */ +#define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \ + (((ck300) << 7) | ((ship_off) << 5) | \ + ((auto_idle) << 3) | ((tout) & 0x07)) +#define RT1711H_AUTOIDLEEN BIT(3) +#define RT1711H_ENEXTMSG BIT(4) + +#define RT1711H_RTCTRL11 0x9E + +/* I2C timeout = (tout + 1) * 12.5ms */ +#define RT1711H_RTCTRL11_SET(en, tout) \ + (((en) << 7) | ((tout) & 0x0F)) + +#define RT1711H_RTCTRL13 0xA0 +#define RT1711H_RTCTRL14 0xA1 +#define RT1711H_RTCTRL15 0xA2 +#define RT1711H_RTCTRL16 0xA3 + +#define RT1711H_RTCTRL18 0xAF +/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */ +#define BMCIO_RXDZEN BIT(0) + +struct rt1711h_chip { + struct tcpci_data data; + struct tcpci *tcpci; + struct device *dev; + struct regulator *vbus; + bool src_en; + u16 did; +}; + +static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16)); +} + +static int rt1711h_write16(struct rt1711h_chip *chip, unsigned int reg, u16 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16)); +} + +static int rt1711h_read8(struct rt1711h_chip *chip, unsigned int reg, u8 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8)); +} + +static int rt1711h_write8(struct rt1711h_chip *chip, unsigned int reg, u8 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8)); +} + +static const struct regmap_config rt1711h_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = 0xFF, /* 0x80 .. 0xFF are vendor defined */ +}; + +static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata) +{ + return container_of(tdata, struct rt1711h_chip, data); +} + +static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + struct regmap *regmap = chip->data.regmap; + int ret; + + /* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL8, + RT1711H_RTCTRL8_SET(0, 1, 1, 2)); + if (ret < 0) + return ret; + + /* Enable PD30 extended message for RT1715 */ + if (chip->did == RT1715_DID) { + ret = regmap_update_bits(regmap, RT1711H_RTCTRL8, + RT1711H_ENEXTMSG, RT1711H_ENEXTMSG); + if (ret < 0) + return ret; + } + + /* I2C reset : (val + 1) * 12.5ms */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL11, + RT1711H_RTCTRL11_SET(1, 0x0F)); + if (ret < 0) + return ret; + + /* tTCPCfilter : (26.7 * val) us */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL14, 0x0F); + if (ret < 0) + return ret; + + /* tDRP : (51.2 + 6.4 * val) ms */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL15, 0x04); + if (ret < 0) + return ret; + + /* dcSRC.DRP : 33% */ + ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330); + if (ret < 0) + return ret; + + /* Enable phy discard retry, retry count 7, rx filter deglitch 100 us */ + ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1); + if (ret < 0) + return ret; + + /* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */ + /* wait time : (val * .4167) us */ + return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62); +} + +static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, + bool src, bool snk) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + int ret; + + if (chip->src_en == src) + return 0; + + if (src) + ret = regulator_enable(chip->vbus); + else + ret = regulator_disable(chip->vbus); + + if (!ret) + chip->src_en = src; + return ret; +} + +static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata, + bool enable) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + + return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8, + RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN); +} + +/* + * Selects the CC PHY noise filter voltage level according to the remote current + * CC voltage level. + * + * @status: The port's current cc status read from IC + * Return 0 if writes succeed; failure code otherwise + */ +static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status) +{ + int ret, cc1, cc2; + u8 role = 0; + u32 rxdz_en, rxdz_sel; + + ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role); + if (ret < 0) + return ret; + + cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) & + TCPC_CC_STATUS_CC1_MASK, + status & TCPC_CC_STATUS_TERM || + tcpc_presenting_rd(role, CC1)); + cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) & + TCPC_CC_STATUS_CC2_MASK, + status & TCPC_CC_STATUS_TERM || + tcpc_presenting_rd(role, CC2)); + + if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) || + (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) { + rxdz_en = BMCIO_RXDZEN; + if (chip->did == RT1715_DID) + rxdz_sel = RT1711H_BMCIO_RXDZSEL; + else + rxdz_sel = 0; + } else { + rxdz_en = 0; + rxdz_sel = RT1711H_BMCIO_RXDZSEL; + } + + ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18, + BMCIO_RXDZEN, rxdz_en); + if (ret < 0) + return ret; + + return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4, + RT1711H_BMCIO_RXDZSEL, rxdz_sel); +} + +static int rt1711h_start_drp_toggling(struct tcpci *tcpci, + struct tcpci_data *tdata, + enum typec_cc_status cc) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + int ret; + unsigned int reg = 0; + + switch (cc) { + default: + case TYPEC_CC_RP_DEF: + reg |= (TCPC_ROLE_CTRL_RP_VAL_DEF << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_1_5: + reg |= (TCPC_ROLE_CTRL_RP_VAL_1_5 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_3_0: + reg |= (TCPC_ROLE_CTRL_RP_VAL_3_0 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + } + + if (cc == TYPEC_CC_RD) + reg |= (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT); + else + reg |= (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT); + + ret = rt1711h_write8(chip, TCPC_ROLE_CTRL, reg); + if (ret < 0) + return ret; + usleep_range(500, 1000); + + return 0; +} + +static irqreturn_t rt1711h_irq(int irq, void *dev_id) +{ + int ret; + u16 alert; + u8 status; + struct rt1711h_chip *chip = dev_id; + + if (!chip->tcpci) + return IRQ_HANDLED; + + ret = rt1711h_read16(chip, TCPC_ALERT, &alert); + if (ret < 0) + goto out; + + if (alert & TCPC_ALERT_CC_STATUS) { + ret = rt1711h_read8(chip, TCPC_CC_STATUS, &status); + if (ret < 0) + goto out; + /* Clear cc change event triggered by starting toggling */ + if (status & TCPC_CC_STATUS_TOGGLING) + rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS); + else + rt1711h_init_cc_params(chip, status); + } + +out: + return tcpci_irq(chip->tcpci); +} + +static int rt1711h_sw_reset(struct rt1711h_chip *chip) +{ + int ret; + + ret = rt1711h_write8(chip, RT1711H_RTCTRL13, 0x01); + if (ret < 0) + return ret; + + usleep_range(1000, 2000); + return 0; +} + +static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip) +{ + int ret; + + ret = i2c_smbus_read_word_data(i2c, TCPC_VENDOR_ID); + if (ret < 0) + return ret; + if (ret != RT1711H_VID) { + dev_err(&i2c->dev, "vid is not correct, 0x%04x\n", ret); + return -ENODEV; + } + ret = i2c_smbus_read_word_data(i2c, TCPC_PRODUCT_ID); + if (ret < 0) + return ret; + if (ret != RT1711H_PID) { + dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret); + return -ENODEV; + } + ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV); + if (ret < 0) + return ret; + if (ret != chip->did) { + dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret); + return -ENODEV; + } + dev_dbg(&i2c->dev, "did is 0x%04x\n", ret); + return ret; +} + +static int rt1711h_probe(struct i2c_client *client) +{ + int ret; + struct rt1711h_chip *chip; + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->did = (size_t)device_get_match_data(&client->dev); + + ret = rt1711h_check_revision(client, chip); + if (ret < 0) { + dev_err(&client->dev, "check vid/pid fail\n"); + return ret; + } + + chip->data.regmap = devm_regmap_init_i2c(client, + &rt1711h_regmap_config); + if (IS_ERR(chip->data.regmap)) + return PTR_ERR(chip->data.regmap); + + chip->dev = &client->dev; + i2c_set_clientdata(client, chip); + + ret = rt1711h_sw_reset(chip); + if (ret < 0) + return ret; + + /* Disable chip interrupts before requesting irq */ + ret = rt1711h_write16(chip, TCPC_ALERT_MASK, 0); + if (ret < 0) + return ret; + + chip->vbus = devm_regulator_get(&client->dev, "vbus"); + if (IS_ERR(chip->vbus)) + return PTR_ERR(chip->vbus); + + chip->data.init = rt1711h_init; + chip->data.set_vbus = rt1711h_set_vbus; + chip->data.set_vconn = rt1711h_set_vconn; + chip->data.start_drp_toggling = rt1711h_start_drp_toggling; + chip->tcpci = tcpci_register_port(chip->dev, &chip->data); + if (IS_ERR_OR_NULL(chip->tcpci)) + return PTR_ERR(chip->tcpci); + + ret = devm_request_threaded_irq(chip->dev, client->irq, NULL, + rt1711h_irq, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + dev_name(chip->dev), chip); + if (ret < 0) + return ret; + enable_irq_wake(client->irq); + + return 0; +} + +static void rt1711h_remove(struct i2c_client *client) +{ + struct rt1711h_chip *chip = i2c_get_clientdata(client); + + tcpci_unregister_port(chip->tcpci); +} + +static const struct i2c_device_id rt1711h_id[] = { + { "rt1711h", 0 }, + { "rt1715", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rt1711h_id); + +#ifdef CONFIG_OF +static const struct of_device_id rt1711h_of_match[] = { + { .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID }, + { .compatible = "richtek,rt1715", .data = (void *)RT1715_DID }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt1711h_of_match); +#endif + +static struct i2c_driver rt1711h_i2c_driver = { + .driver = { + .name = "rt1711h", + .of_match_table = of_match_ptr(rt1711h_of_match), + }, + .probe = rt1711h_probe, + .remove = rt1711h_remove, + .id_table = rt1711h_id, +}; +module_i2c_driver(rt1711h_i2c_driver); + +MODULE_AUTHOR("ShuFan Lee <shufan_lee@richtek.com>"); +MODULE_DESCRIPTION("RT1711H USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c new file mode 100644 index 0000000000..6d455ca761 --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -0,0 +1,6675 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2017 Google, Inc + * + * USB Power Delivery protocol stack. + */ + +#include <linux/completion.h> +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/hrtimer.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/power_supply.h> +#include <linux/proc_fs.h> +#include <linux/property.h> +#include <linux/sched/clock.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/usb.h> +#include <linux/usb/pd.h> +#include <linux/usb/pd_ado.h> +#include <linux/usb/pd_bdo.h> +#include <linux/usb/pd_ext_sdb.h> +#include <linux/usb/pd_vdo.h> +#include <linux/usb/role.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec_altmode.h> + +#include <uapi/linux/sched/types.h> + +#define FOREACH_STATE(S) \ + S(INVALID_STATE), \ + S(TOGGLING), \ + S(CHECK_CONTAMINANT), \ + S(SRC_UNATTACHED), \ + S(SRC_ATTACH_WAIT), \ + S(SRC_ATTACHED), \ + S(SRC_STARTUP), \ + S(SRC_SEND_CAPABILITIES), \ + S(SRC_SEND_CAPABILITIES_TIMEOUT), \ + S(SRC_NEGOTIATE_CAPABILITIES), \ + S(SRC_TRANSITION_SUPPLY), \ + S(SRC_READY), \ + S(SRC_WAIT_NEW_CAPABILITIES), \ + \ + S(SNK_UNATTACHED), \ + S(SNK_ATTACH_WAIT), \ + S(SNK_DEBOUNCED), \ + S(SNK_ATTACHED), \ + S(SNK_STARTUP), \ + S(SNK_DISCOVERY), \ + S(SNK_DISCOVERY_DEBOUNCE), \ + S(SNK_DISCOVERY_DEBOUNCE_DONE), \ + S(SNK_WAIT_CAPABILITIES), \ + S(SNK_NEGOTIATE_CAPABILITIES), \ + S(SNK_NEGOTIATE_PPS_CAPABILITIES), \ + S(SNK_TRANSITION_SINK), \ + S(SNK_TRANSITION_SINK_VBUS), \ + S(SNK_READY), \ + \ + S(ACC_UNATTACHED), \ + S(DEBUG_ACC_ATTACHED), \ + S(AUDIO_ACC_ATTACHED), \ + S(AUDIO_ACC_DEBOUNCE), \ + \ + S(HARD_RESET_SEND), \ + S(HARD_RESET_START), \ + S(SRC_HARD_RESET_VBUS_OFF), \ + S(SRC_HARD_RESET_VBUS_ON), \ + S(SNK_HARD_RESET_SINK_OFF), \ + S(SNK_HARD_RESET_WAIT_VBUS), \ + S(SNK_HARD_RESET_SINK_ON), \ + \ + S(SOFT_RESET), \ + S(SRC_SOFT_RESET_WAIT_SNK_TX), \ + S(SNK_SOFT_RESET), \ + S(SOFT_RESET_SEND), \ + \ + S(DR_SWAP_ACCEPT), \ + S(DR_SWAP_SEND), \ + S(DR_SWAP_SEND_TIMEOUT), \ + S(DR_SWAP_CANCEL), \ + S(DR_SWAP_CHANGE_DR), \ + \ + S(PR_SWAP_ACCEPT), \ + S(PR_SWAP_SEND), \ + S(PR_SWAP_SEND_TIMEOUT), \ + S(PR_SWAP_CANCEL), \ + S(PR_SWAP_START), \ + S(PR_SWAP_SRC_SNK_TRANSITION_OFF), \ + S(PR_SWAP_SRC_SNK_SOURCE_OFF), \ + S(PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED), \ + S(PR_SWAP_SRC_SNK_SINK_ON), \ + S(PR_SWAP_SNK_SRC_SINK_OFF), \ + S(PR_SWAP_SNK_SRC_SOURCE_ON), \ + S(PR_SWAP_SNK_SRC_SOURCE_ON_VBUS_RAMPED_UP), \ + \ + S(VCONN_SWAP_ACCEPT), \ + S(VCONN_SWAP_SEND), \ + S(VCONN_SWAP_SEND_TIMEOUT), \ + S(VCONN_SWAP_CANCEL), \ + S(VCONN_SWAP_START), \ + S(VCONN_SWAP_WAIT_FOR_VCONN), \ + S(VCONN_SWAP_TURN_ON_VCONN), \ + S(VCONN_SWAP_TURN_OFF_VCONN), \ + \ + S(FR_SWAP_SEND), \ + S(FR_SWAP_SEND_TIMEOUT), \ + S(FR_SWAP_SNK_SRC_TRANSITION_TO_OFF), \ + S(FR_SWAP_SNK_SRC_NEW_SINK_READY), \ + S(FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED), \ + S(FR_SWAP_CANCEL), \ + \ + S(SNK_TRY), \ + S(SNK_TRY_WAIT), \ + S(SNK_TRY_WAIT_DEBOUNCE), \ + S(SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS), \ + S(SRC_TRYWAIT), \ + S(SRC_TRYWAIT_DEBOUNCE), \ + S(SRC_TRYWAIT_UNATTACHED), \ + \ + S(SRC_TRY), \ + S(SRC_TRY_WAIT), \ + S(SRC_TRY_DEBOUNCE), \ + S(SNK_TRYWAIT), \ + S(SNK_TRYWAIT_DEBOUNCE), \ + S(SNK_TRYWAIT_VBUS), \ + S(BIST_RX), \ + \ + S(GET_STATUS_SEND), \ + S(GET_STATUS_SEND_TIMEOUT), \ + S(GET_PPS_STATUS_SEND), \ + S(GET_PPS_STATUS_SEND_TIMEOUT), \ + \ + S(GET_SINK_CAP), \ + S(GET_SINK_CAP_TIMEOUT), \ + \ + S(ERROR_RECOVERY), \ + S(PORT_RESET), \ + S(PORT_RESET_WAIT_OFF), \ + \ + S(AMS_START), \ + S(CHUNK_NOT_SUPP) + +#define FOREACH_AMS(S) \ + S(NONE_AMS), \ + S(POWER_NEGOTIATION), \ + S(GOTOMIN), \ + S(SOFT_RESET_AMS), \ + S(HARD_RESET), \ + S(CABLE_RESET), \ + S(GET_SOURCE_CAPABILITIES), \ + S(GET_SINK_CAPABILITIES), \ + S(POWER_ROLE_SWAP), \ + S(FAST_ROLE_SWAP), \ + S(DATA_ROLE_SWAP), \ + S(VCONN_SWAP), \ + S(SOURCE_ALERT), \ + S(GETTING_SOURCE_EXTENDED_CAPABILITIES),\ + S(GETTING_SOURCE_SINK_STATUS), \ + S(GETTING_BATTERY_CAPABILITIES), \ + S(GETTING_BATTERY_STATUS), \ + S(GETTING_MANUFACTURER_INFORMATION), \ + S(SECURITY), \ + S(FIRMWARE_UPDATE), \ + S(DISCOVER_IDENTITY), \ + S(SOURCE_STARTUP_CABLE_PLUG_DISCOVER_IDENTITY), \ + S(DISCOVER_SVIDS), \ + S(DISCOVER_MODES), \ + S(DFP_TO_UFP_ENTER_MODE), \ + S(DFP_TO_UFP_EXIT_MODE), \ + S(DFP_TO_CABLE_PLUG_ENTER_MODE), \ + S(DFP_TO_CABLE_PLUG_EXIT_MODE), \ + S(ATTENTION), \ + S(BIST), \ + S(UNSTRUCTURED_VDMS), \ + S(STRUCTURED_VDMS), \ + S(COUNTRY_INFO), \ + S(COUNTRY_CODES) + +#define GENERATE_ENUM(e) e +#define GENERATE_STRING(s) #s + +enum tcpm_state { + FOREACH_STATE(GENERATE_ENUM) +}; + +static const char * const tcpm_states[] = { + FOREACH_STATE(GENERATE_STRING) +}; + +enum tcpm_ams { + FOREACH_AMS(GENERATE_ENUM) +}; + +static const char * const tcpm_ams_str[] = { + FOREACH_AMS(GENERATE_STRING) +}; + +enum vdm_states { + VDM_STATE_ERR_BUSY = -3, + VDM_STATE_ERR_SEND = -2, + VDM_STATE_ERR_TMOUT = -1, + VDM_STATE_DONE = 0, + /* Anything >0 represents an active state */ + VDM_STATE_READY = 1, + VDM_STATE_BUSY = 2, + VDM_STATE_WAIT_RSP_BUSY = 3, + VDM_STATE_SEND_MESSAGE = 4, +}; + +enum pd_msg_request { + PD_MSG_NONE = 0, + PD_MSG_CTRL_REJECT, + PD_MSG_CTRL_WAIT, + PD_MSG_CTRL_NOT_SUPP, + PD_MSG_DATA_SINK_CAP, + PD_MSG_DATA_SOURCE_CAP, +}; + +enum adev_actions { + ADEV_NONE = 0, + ADEV_NOTIFY_USB_AND_QUEUE_VDM, + ADEV_QUEUE_VDM, + ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL, + ADEV_ATTENTION, +}; + +/* + * Initial current capability of the new source when vSafe5V is applied during PD3.0 Fast Role Swap. + * Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0, + * Version 1.2" + */ +enum frs_typec_current { + FRS_NOT_SUPPORTED, + FRS_DEFAULT_POWER, + FRS_5V_1P5A, + FRS_5V_3A, +}; + +/* Events from low level driver */ + +#define TCPM_CC_EVENT BIT(0) +#define TCPM_VBUS_EVENT BIT(1) +#define TCPM_RESET_EVENT BIT(2) +#define TCPM_FRS_EVENT BIT(3) +#define TCPM_SOURCING_VBUS BIT(4) +#define TCPM_PORT_CLEAN BIT(5) + +#define LOG_BUFFER_ENTRIES 1024 +#define LOG_BUFFER_ENTRY_SIZE 128 + +/* Alternate mode support */ + +#define SVID_DISCOVERY_MAX 16 +#define ALTMODE_DISCOVERY_MAX (SVID_DISCOVERY_MAX * MODE_DISCOVERY_MAX) + +#define GET_SINK_CAP_RETRY_MS 100 +#define SEND_DISCOVER_RETRY_MS 100 + +struct pd_mode_data { + int svid_index; /* current SVID index */ + int nsvids; + u16 svids[SVID_DISCOVERY_MAX]; + int altmodes; /* number of alternate modes */ + struct typec_altmode_desc altmode_desc[ALTMODE_DISCOVERY_MAX]; +}; + +/* + * @min_volt: Actual min voltage at the local port + * @req_min_volt: Requested min voltage to the port partner + * @max_volt: Actual max voltage at the local port + * @req_max_volt: Requested max voltage to the port partner + * @max_curr: Actual max current at the local port + * @req_max_curr: Requested max current of the port partner + * @req_out_volt: Requested output voltage to the port partner + * @req_op_curr: Requested operating current to the port partner + * @supported: Parter has at least one APDO hence supports PPS + * @active: PPS mode is active + */ +struct pd_pps_data { + u32 min_volt; + u32 req_min_volt; + u32 max_volt; + u32 req_max_volt; + u32 max_curr; + u32 req_max_curr; + u32 req_out_volt; + u32 req_op_curr; + bool supported; + bool active; +}; + +struct tcpm_port { + struct device *dev; + + struct mutex lock; /* tcpm state machine lock */ + struct kthread_worker *wq; + + struct typec_capability typec_caps; + struct typec_port *typec_port; + + struct tcpc_dev *tcpc; + struct usb_role_switch *role_sw; + + enum typec_role vconn_role; + enum typec_role pwr_role; + enum typec_data_role data_role; + enum typec_pwr_opmode pwr_opmode; + + struct usb_pd_identity partner_ident; + struct typec_partner_desc partner_desc; + struct typec_partner *partner; + + enum typec_cc_status cc_req; + enum typec_cc_status src_rp; /* work only if pd_supported == false */ + + enum typec_cc_status cc1; + enum typec_cc_status cc2; + enum typec_cc_polarity polarity; + + bool attached; + bool connected; + bool registered; + bool pd_supported; + enum typec_port_type port_type; + + /* + * Set to true when vbus is greater than VSAFE5V min. + * Set to false when vbus falls below vSinkDisconnect max threshold. + */ + bool vbus_present; + + /* + * Set to true when vbus is less than VSAFE0V max. + * Set to false when vbus is greater than VSAFE0V max. + */ + bool vbus_vsafe0v; + + bool vbus_never_low; + bool vbus_source; + bool vbus_charge; + + /* Set to true when Discover_Identity Command is expected to be sent in Ready states. */ + bool send_discover; + bool op_vsafe5v; + + int try_role; + int try_snk_count; + int try_src_count; + + enum pd_msg_request queued_message; + + enum tcpm_state enter_state; + enum tcpm_state prev_state; + enum tcpm_state state; + enum tcpm_state delayed_state; + ktime_t delayed_runtime; + unsigned long delay_ms; + + spinlock_t pd_event_lock; + u32 pd_events; + + struct kthread_work event_work; + struct hrtimer state_machine_timer; + struct kthread_work state_machine; + struct hrtimer vdm_state_machine_timer; + struct kthread_work vdm_state_machine; + struct hrtimer enable_frs_timer; + struct kthread_work enable_frs; + struct hrtimer send_discover_timer; + struct kthread_work send_discover_work; + bool state_machine_running; + /* Set to true when VDM State Machine has following actions. */ + bool vdm_sm_running; + + struct completion tx_complete; + enum tcpm_transmit_status tx_status; + + struct mutex swap_lock; /* swap command lock */ + bool swap_pending; + bool non_pd_role_swap; + struct completion swap_complete; + int swap_status; + + unsigned int negotiated_rev; + unsigned int message_id; + unsigned int caps_count; + unsigned int hard_reset_count; + bool pd_capable; + bool explicit_contract; + unsigned int rx_msgid; + + /* USB PD objects */ + struct usb_power_delivery *pd; + struct usb_power_delivery_capabilities *port_source_caps; + struct usb_power_delivery_capabilities *port_sink_caps; + struct usb_power_delivery *partner_pd; + struct usb_power_delivery_capabilities *partner_source_caps; + struct usb_power_delivery_capabilities *partner_sink_caps; + + /* Partner capabilities/requests */ + u32 sink_request; + u32 source_caps[PDO_MAX_OBJECTS]; + unsigned int nr_source_caps; + u32 sink_caps[PDO_MAX_OBJECTS]; + unsigned int nr_sink_caps; + + /* Local capabilities */ + u32 src_pdo[PDO_MAX_OBJECTS]; + unsigned int nr_src_pdo; + u32 snk_pdo[PDO_MAX_OBJECTS]; + unsigned int nr_snk_pdo; + u32 snk_vdo_v1[VDO_MAX_OBJECTS]; + unsigned int nr_snk_vdo_v1; + u32 snk_vdo[VDO_MAX_OBJECTS]; + unsigned int nr_snk_vdo; + + unsigned int operating_snk_mw; + bool update_sink_caps; + + /* Requested current / voltage to the port partner */ + u32 req_current_limit; + u32 req_supply_voltage; + /* Actual current / voltage limit of the local port */ + u32 current_limit; + u32 supply_voltage; + + /* Used to export TA voltage and current */ + struct power_supply *psy; + struct power_supply_desc psy_desc; + enum power_supply_usb_type usb_type; + + u32 bist_request; + + /* PD state for Vendor Defined Messages */ + enum vdm_states vdm_state; + u32 vdm_retries; + /* next Vendor Defined Message to send */ + u32 vdo_data[VDO_MAX_SIZE]; + u8 vdo_count; + /* VDO to retry if UFP responder replied busy */ + u32 vdo_retry; + + /* PPS */ + struct pd_pps_data pps_data; + struct completion pps_complete; + bool pps_pending; + int pps_status; + + /* Alternate mode data */ + struct pd_mode_data mode_data; + struct typec_altmode *partner_altmode[ALTMODE_DISCOVERY_MAX]; + struct typec_altmode *port_altmode[ALTMODE_DISCOVERY_MAX]; + + /* Deadline in jiffies to exit src_try_wait state */ + unsigned long max_wait; + + /* port belongs to a self powered device */ + bool self_powered; + + /* Sink FRS */ + enum frs_typec_current new_source_frs_current; + + /* Sink caps have been queried */ + bool sink_cap_done; + + /* Collision Avoidance and Atomic Message Sequence */ + enum tcpm_state upcoming_state; + enum tcpm_ams ams; + enum tcpm_ams next_ams; + bool in_ams; + + /* Auto vbus discharge status */ + bool auto_vbus_discharge_enabled; + + /* + * When set, port requests PD_P_SNK_STDBY_MW upon entering SNK_DISCOVERY and + * the actual current limit after RX of PD_CTRL_PSRDY for PD link, + * SNK_READY for non-pd link. + */ + bool slow_charger_loop; + + /* + * When true indicates that the lower level drivers indicate potential presence + * of contaminant in the connector pins based on the tcpm state machine + * transitions. + */ + bool potential_contaminant; +#ifdef CONFIG_DEBUG_FS + struct dentry *dentry; + struct mutex logbuffer_lock; /* log buffer access lock */ + int logbuffer_head; + int logbuffer_tail; + u8 *logbuffer[LOG_BUFFER_ENTRIES]; +#endif +}; + +struct pd_rx_event { + struct kthread_work work; + struct tcpm_port *port; + struct pd_message msg; +}; + +static const char * const pd_rev[] = { + [PD_REV10] = "rev1", + [PD_REV20] = "rev2", + [PD_REV30] = "rev3", +}; + +#define tcpm_cc_is_sink(cc) \ + ((cc) == TYPEC_CC_RP_DEF || (cc) == TYPEC_CC_RP_1_5 || \ + (cc) == TYPEC_CC_RP_3_0) + +#define tcpm_port_is_sink(port) \ + ((tcpm_cc_is_sink((port)->cc1) && !tcpm_cc_is_sink((port)->cc2)) || \ + (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1))) + +#define tcpm_cc_is_source(cc) ((cc) == TYPEC_CC_RD) +#define tcpm_cc_is_audio(cc) ((cc) == TYPEC_CC_RA) +#define tcpm_cc_is_open(cc) ((cc) == TYPEC_CC_OPEN) + +#define tcpm_port_is_source(port) \ + ((tcpm_cc_is_source((port)->cc1) && \ + !tcpm_cc_is_source((port)->cc2)) || \ + (tcpm_cc_is_source((port)->cc2) && \ + !tcpm_cc_is_source((port)->cc1))) + +#define tcpm_port_is_debug(port) \ + (tcpm_cc_is_source((port)->cc1) && tcpm_cc_is_source((port)->cc2)) + +#define tcpm_port_is_audio(port) \ + (tcpm_cc_is_audio((port)->cc1) && tcpm_cc_is_audio((port)->cc2)) + +#define tcpm_port_is_audio_detached(port) \ + ((tcpm_cc_is_audio((port)->cc1) && tcpm_cc_is_open((port)->cc2)) || \ + (tcpm_cc_is_audio((port)->cc2) && tcpm_cc_is_open((port)->cc1))) + +#define tcpm_try_snk(port) \ + ((port)->try_snk_count == 0 && (port)->try_role == TYPEC_SINK && \ + (port)->port_type == TYPEC_PORT_DRP) + +#define tcpm_try_src(port) \ + ((port)->try_src_count == 0 && (port)->try_role == TYPEC_SOURCE && \ + (port)->port_type == TYPEC_PORT_DRP) + +#define tcpm_data_role_for_source(port) \ + ((port)->typec_caps.data == TYPEC_PORT_UFP ? \ + TYPEC_DEVICE : TYPEC_HOST) + +#define tcpm_data_role_for_sink(port) \ + ((port)->typec_caps.data == TYPEC_PORT_DFP ? \ + TYPEC_HOST : TYPEC_DEVICE) + +#define tcpm_sink_tx_ok(port) \ + (tcpm_port_is_sink(port) && \ + ((port)->cc1 == TYPEC_CC_RP_3_0 || (port)->cc2 == TYPEC_CC_RP_3_0)) + +#define tcpm_wait_for_discharge(port) \ + (((port)->auto_vbus_discharge_enabled && !(port)->vbus_vsafe0v) ? PD_T_SAFE_0V : 0) + +static enum tcpm_state tcpm_default_state(struct tcpm_port *port) +{ + if (port->port_type == TYPEC_PORT_DRP) { + if (port->try_role == TYPEC_SINK) + return SNK_UNATTACHED; + else if (port->try_role == TYPEC_SOURCE) + return SRC_UNATTACHED; + /* Fall through to return SRC_UNATTACHED */ + } else if (port->port_type == TYPEC_PORT_SNK) { + return SNK_UNATTACHED; + } + return SRC_UNATTACHED; +} + +static bool tcpm_port_is_disconnected(struct tcpm_port *port) +{ + return (!port->attached && port->cc1 == TYPEC_CC_OPEN && + port->cc2 == TYPEC_CC_OPEN) || + (port->attached && ((port->polarity == TYPEC_POLARITY_CC1 && + port->cc1 == TYPEC_CC_OPEN) || + (port->polarity == TYPEC_POLARITY_CC2 && + port->cc2 == TYPEC_CC_OPEN))); +} + +/* + * Logging + */ + +#ifdef CONFIG_DEBUG_FS + +static bool tcpm_log_full(struct tcpm_port *port) +{ + return port->logbuffer_tail == + (port->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; +} + +__printf(2, 0) +static void _tcpm_log(struct tcpm_port *port, const char *fmt, va_list args) +{ + char tmpbuffer[LOG_BUFFER_ENTRY_SIZE]; + u64 ts_nsec = local_clock(); + unsigned long rem_nsec; + + mutex_lock(&port->logbuffer_lock); + if (!port->logbuffer[port->logbuffer_head]) { + port->logbuffer[port->logbuffer_head] = + kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL); + if (!port->logbuffer[port->logbuffer_head]) { + mutex_unlock(&port->logbuffer_lock); + return; + } + } + + vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args); + + if (tcpm_log_full(port)) { + port->logbuffer_head = max(port->logbuffer_head - 1, 0); + strcpy(tmpbuffer, "overflow"); + } + + if (port->logbuffer_head < 0 || + port->logbuffer_head >= LOG_BUFFER_ENTRIES) { + dev_warn(port->dev, + "Bad log buffer index %d\n", port->logbuffer_head); + goto abort; + } + + if (!port->logbuffer[port->logbuffer_head]) { + dev_warn(port->dev, + "Log buffer index %d is NULL\n", port->logbuffer_head); + goto abort; + } + + rem_nsec = do_div(ts_nsec, 1000000000); + scnprintf(port->logbuffer[port->logbuffer_head], + LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s", + (unsigned long)ts_nsec, rem_nsec / 1000, + tmpbuffer); + port->logbuffer_head = (port->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; + +abort: + mutex_unlock(&port->logbuffer_lock); +} + +__printf(2, 3) +static void tcpm_log(struct tcpm_port *port, const char *fmt, ...) +{ + va_list args; + + /* Do not log while disconnected and unattached */ + if (tcpm_port_is_disconnected(port) && + (port->state == SRC_UNATTACHED || port->state == SNK_UNATTACHED || + port->state == TOGGLING || port->state == CHECK_CONTAMINANT)) + return; + + va_start(args, fmt); + _tcpm_log(port, fmt, args); + va_end(args); +} + +__printf(2, 3) +static void tcpm_log_force(struct tcpm_port *port, const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + _tcpm_log(port, fmt, args); + va_end(args); +} + +static void tcpm_log_source_caps(struct tcpm_port *port) +{ + int i; + + for (i = 0; i < port->nr_source_caps; i++) { + u32 pdo = port->source_caps[i]; + enum pd_pdo_type type = pdo_type(pdo); + char msg[64]; + + switch (type) { + case PDO_TYPE_FIXED: + scnprintf(msg, sizeof(msg), + "%u mV, %u mA [%s%s%s%s%s%s]", + pdo_fixed_voltage(pdo), + pdo_max_current(pdo), + (pdo & PDO_FIXED_DUAL_ROLE) ? + "R" : "", + (pdo & PDO_FIXED_SUSPEND) ? + "S" : "", + (pdo & PDO_FIXED_HIGHER_CAP) ? + "H" : "", + (pdo & PDO_FIXED_USB_COMM) ? + "U" : "", + (pdo & PDO_FIXED_DATA_SWAP) ? + "D" : "", + (pdo & PDO_FIXED_EXTPOWER) ? + "E" : ""); + break; + case PDO_TYPE_VAR: + scnprintf(msg, sizeof(msg), + "%u-%u mV, %u mA", + pdo_min_voltage(pdo), + pdo_max_voltage(pdo), + pdo_max_current(pdo)); + break; + case PDO_TYPE_BATT: + scnprintf(msg, sizeof(msg), + "%u-%u mV, %u mW", + pdo_min_voltage(pdo), + pdo_max_voltage(pdo), + pdo_max_power(pdo)); + break; + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) == APDO_TYPE_PPS) + scnprintf(msg, sizeof(msg), + "%u-%u mV, %u mA", + pdo_pps_apdo_min_voltage(pdo), + pdo_pps_apdo_max_voltage(pdo), + pdo_pps_apdo_max_current(pdo)); + else + strcpy(msg, "undefined APDO"); + break; + default: + strcpy(msg, "undefined"); + break; + } + tcpm_log(port, " PDO %d: type %d, %s", + i, type, msg); + } +} + +static int tcpm_debug_show(struct seq_file *s, void *v) +{ + struct tcpm_port *port = s->private; + int tail; + + mutex_lock(&port->logbuffer_lock); + tail = port->logbuffer_tail; + while (tail != port->logbuffer_head) { + seq_printf(s, "%s\n", port->logbuffer[tail]); + tail = (tail + 1) % LOG_BUFFER_ENTRIES; + } + if (!seq_has_overflowed(s)) + port->logbuffer_tail = tail; + mutex_unlock(&port->logbuffer_lock); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(tcpm_debug); + +static void tcpm_debugfs_init(struct tcpm_port *port) +{ + char name[NAME_MAX]; + + mutex_init(&port->logbuffer_lock); + snprintf(name, NAME_MAX, "tcpm-%s", dev_name(port->dev)); + port->dentry = debugfs_create_dir(name, usb_debug_root); + debugfs_create_file("log", S_IFREG | 0444, port->dentry, port, + &tcpm_debug_fops); +} + +static void tcpm_debugfs_exit(struct tcpm_port *port) +{ + int i; + + mutex_lock(&port->logbuffer_lock); + for (i = 0; i < LOG_BUFFER_ENTRIES; i++) { + kfree(port->logbuffer[i]); + port->logbuffer[i] = NULL; + } + mutex_unlock(&port->logbuffer_lock); + + debugfs_remove(port->dentry); +} + +#else + +__printf(2, 3) +static void tcpm_log(const struct tcpm_port *port, const char *fmt, ...) { } +__printf(2, 3) +static void tcpm_log_force(struct tcpm_port *port, const char *fmt, ...) { } +static void tcpm_log_source_caps(struct tcpm_port *port) { } +static void tcpm_debugfs_init(const struct tcpm_port *port) { } +static void tcpm_debugfs_exit(const struct tcpm_port *port) { } + +#endif + +static void tcpm_set_cc(struct tcpm_port *port, enum typec_cc_status cc) +{ + tcpm_log(port, "cc:=%d", cc); + port->cc_req = cc; + port->tcpc->set_cc(port->tcpc, cc); +} + +static int tcpm_enable_auto_vbus_discharge(struct tcpm_port *port, bool enable) +{ + int ret = 0; + + if (port->tcpc->enable_auto_vbus_discharge) { + ret = port->tcpc->enable_auto_vbus_discharge(port->tcpc, enable); + tcpm_log_force(port, "%s vbus discharge ret:%d", enable ? "enable" : "disable", + ret); + if (!ret) + port->auto_vbus_discharge_enabled = enable; + } + + return ret; +} + +static void tcpm_apply_rc(struct tcpm_port *port) +{ + /* + * TCPCI: Move to APPLY_RC state to prevent disconnect during PR_SWAP + * when Vbus auto discharge on disconnect is enabled. + */ + if (port->tcpc->enable_auto_vbus_discharge && port->tcpc->apply_rc) { + tcpm_log(port, "Apply_RC"); + port->tcpc->apply_rc(port->tcpc, port->cc_req, port->polarity); + tcpm_enable_auto_vbus_discharge(port, false); + } +} + +/* + * Determine RP value to set based on maximum current supported + * by a port if configured as source. + * Returns CC value to report to link partner. + */ +static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port) +{ + const u32 *src_pdo = port->src_pdo; + int nr_pdo = port->nr_src_pdo; + int i; + + if (!port->pd_supported) + return port->src_rp; + + /* + * Search for first entry with matching voltage. + * It should report the maximum supported current. + */ + for (i = 0; i < nr_pdo; i++) { + const u32 pdo = src_pdo[i]; + + if (pdo_type(pdo) == PDO_TYPE_FIXED && + pdo_fixed_voltage(pdo) == 5000) { + unsigned int curr = pdo_max_current(pdo); + + if (curr >= 3000) + return TYPEC_CC_RP_3_0; + else if (curr >= 1500) + return TYPEC_CC_RP_1_5; + return TYPEC_CC_RP_DEF; + } + } + + return TYPEC_CC_RP_DEF; +} + +static void tcpm_ams_finish(struct tcpm_port *port) +{ + tcpm_log(port, "AMS %s finished", tcpm_ams_str[port->ams]); + + if (port->pd_capable && port->pwr_role == TYPEC_SOURCE) { + if (port->negotiated_rev >= PD_REV30) + tcpm_set_cc(port, SINK_TX_OK); + else + tcpm_set_cc(port, SINK_TX_NG); + } else if (port->pwr_role == TYPEC_SOURCE) { + tcpm_set_cc(port, tcpm_rp_cc(port)); + } + + port->in_ams = false; + port->ams = NONE_AMS; +} + +static int tcpm_pd_transmit(struct tcpm_port *port, + enum tcpm_transmit_type type, + const struct pd_message *msg) +{ + unsigned long timeout; + int ret; + + if (msg) + tcpm_log(port, "PD TX, header: %#x", le16_to_cpu(msg->header)); + else + tcpm_log(port, "PD TX, type: %#x", type); + + reinit_completion(&port->tx_complete); + ret = port->tcpc->pd_transmit(port->tcpc, type, msg, port->negotiated_rev); + if (ret < 0) + return ret; + + mutex_unlock(&port->lock); + timeout = wait_for_completion_timeout(&port->tx_complete, + msecs_to_jiffies(PD_T_TCPC_TX_TIMEOUT)); + mutex_lock(&port->lock); + if (!timeout) + return -ETIMEDOUT; + + switch (port->tx_status) { + case TCPC_TX_SUCCESS: + port->message_id = (port->message_id + 1) & PD_HEADER_ID_MASK; + /* + * USB PD rev 2.0, 8.3.2.2.1: + * USB PD rev 3.0, 8.3.2.1.3: + * "... Note that every AMS is Interruptible until the first + * Message in the sequence has been successfully sent (GoodCRC + * Message received)." + */ + if (port->ams != NONE_AMS) + port->in_ams = true; + break; + case TCPC_TX_DISCARDED: + ret = -EAGAIN; + break; + case TCPC_TX_FAILED: + default: + ret = -EIO; + break; + } + + /* Some AMS don't expect responses. Finish them here. */ + if (port->ams == ATTENTION || port->ams == SOURCE_ALERT) + tcpm_ams_finish(port); + + return ret; +} + +void tcpm_pd_transmit_complete(struct tcpm_port *port, + enum tcpm_transmit_status status) +{ + tcpm_log(port, "PD TX complete, status: %u", status); + port->tx_status = status; + complete(&port->tx_complete); +} +EXPORT_SYMBOL_GPL(tcpm_pd_transmit_complete); + +static int tcpm_mux_set(struct tcpm_port *port, int state, + enum usb_role usb_role, + enum typec_orientation orientation) +{ + int ret; + + tcpm_log(port, "Requesting mux state %d, usb-role %d, orientation %d", + state, usb_role, orientation); + + ret = typec_set_orientation(port->typec_port, orientation); + if (ret) + return ret; + + if (port->role_sw) { + ret = usb_role_switch_set_role(port->role_sw, usb_role); + if (ret) + return ret; + } + + return typec_set_mode(port->typec_port, state); +} + +static int tcpm_set_polarity(struct tcpm_port *port, + enum typec_cc_polarity polarity) +{ + int ret; + + tcpm_log(port, "polarity %d", polarity); + + ret = port->tcpc->set_polarity(port->tcpc, polarity); + if (ret < 0) + return ret; + + port->polarity = polarity; + + return 0; +} + +static int tcpm_set_vconn(struct tcpm_port *port, bool enable) +{ + int ret; + + tcpm_log(port, "vconn:=%d", enable); + + ret = port->tcpc->set_vconn(port->tcpc, enable); + if (!ret) { + port->vconn_role = enable ? TYPEC_SOURCE : TYPEC_SINK; + typec_set_vconn_role(port->typec_port, port->vconn_role); + } + + return ret; +} + +static u32 tcpm_get_current_limit(struct tcpm_port *port) +{ + enum typec_cc_status cc; + u32 limit; + + cc = port->polarity ? port->cc2 : port->cc1; + switch (cc) { + case TYPEC_CC_RP_1_5: + limit = 1500; + break; + case TYPEC_CC_RP_3_0: + limit = 3000; + break; + case TYPEC_CC_RP_DEF: + default: + if (port->tcpc->get_current_limit) + limit = port->tcpc->get_current_limit(port->tcpc); + else + limit = 0; + break; + } + + return limit; +} + +static int tcpm_set_current_limit(struct tcpm_port *port, u32 max_ma, u32 mv) +{ + int ret = -EOPNOTSUPP; + + tcpm_log(port, "Setting voltage/current limit %u mV %u mA", mv, max_ma); + + port->supply_voltage = mv; + port->current_limit = max_ma; + power_supply_changed(port->psy); + + if (port->tcpc->set_current_limit) + ret = port->tcpc->set_current_limit(port->tcpc, max_ma, mv); + + return ret; +} + +static int tcpm_set_attached_state(struct tcpm_port *port, bool attached) +{ + return port->tcpc->set_roles(port->tcpc, attached, port->pwr_role, + port->data_role); +} + +static int tcpm_set_roles(struct tcpm_port *port, bool attached, + enum typec_role role, enum typec_data_role data) +{ + enum typec_orientation orientation; + enum usb_role usb_role; + int ret; + + if (port->polarity == TYPEC_POLARITY_CC1) + orientation = TYPEC_ORIENTATION_NORMAL; + else + orientation = TYPEC_ORIENTATION_REVERSE; + + if (port->typec_caps.data == TYPEC_PORT_DRD) { + if (data == TYPEC_HOST) + usb_role = USB_ROLE_HOST; + else + usb_role = USB_ROLE_DEVICE; + } else if (port->typec_caps.data == TYPEC_PORT_DFP) { + if (data == TYPEC_HOST) { + if (role == TYPEC_SOURCE) + usb_role = USB_ROLE_HOST; + else + usb_role = USB_ROLE_NONE; + } else { + return -ENOTSUPP; + } + } else { + if (data == TYPEC_DEVICE) { + if (role == TYPEC_SINK) + usb_role = USB_ROLE_DEVICE; + else + usb_role = USB_ROLE_NONE; + } else { + return -ENOTSUPP; + } + } + + ret = tcpm_mux_set(port, TYPEC_STATE_USB, usb_role, orientation); + if (ret < 0) + return ret; + + ret = port->tcpc->set_roles(port->tcpc, attached, role, data); + if (ret < 0) + return ret; + + port->pwr_role = role; + port->data_role = data; + typec_set_data_role(port->typec_port, data); + typec_set_pwr_role(port->typec_port, role); + + return 0; +} + +static int tcpm_set_pwr_role(struct tcpm_port *port, enum typec_role role) +{ + int ret; + + ret = port->tcpc->set_roles(port->tcpc, true, role, + port->data_role); + if (ret < 0) + return ret; + + port->pwr_role = role; + typec_set_pwr_role(port->typec_port, role); + + return 0; +} + +/* + * Transform the PDO to be compliant to PD rev2.0. + * Return 0 if the PDO type is not defined in PD rev2.0. + * Otherwise, return the converted PDO. + */ +static u32 tcpm_forge_legacy_pdo(struct tcpm_port *port, u32 pdo, enum typec_role role) +{ + switch (pdo_type(pdo)) { + case PDO_TYPE_FIXED: + if (role == TYPEC_SINK) + return pdo & ~PDO_FIXED_FRS_CURR_MASK; + else + return pdo & ~PDO_FIXED_UNCHUNK_EXT; + case PDO_TYPE_VAR: + case PDO_TYPE_BATT: + return pdo; + case PDO_TYPE_APDO: + default: + return 0; + } +} + +static int tcpm_pd_send_source_caps(struct tcpm_port *port) +{ + struct pd_message msg; + u32 pdo; + unsigned int i, nr_pdo = 0; + + memset(&msg, 0, sizeof(msg)); + + for (i = 0; i < port->nr_src_pdo; i++) { + if (port->negotiated_rev >= PD_REV30) { + msg.payload[nr_pdo++] = cpu_to_le32(port->src_pdo[i]); + } else { + pdo = tcpm_forge_legacy_pdo(port, port->src_pdo[i], TYPEC_SOURCE); + if (pdo) + msg.payload[nr_pdo++] = cpu_to_le32(pdo); + } + } + + if (!nr_pdo) { + /* No source capabilities defined, sink only */ + msg.header = PD_HEADER_LE(PD_CTRL_REJECT, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, 0); + } else { + msg.header = PD_HEADER_LE(PD_DATA_SOURCE_CAP, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, + nr_pdo); + } + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +static int tcpm_pd_send_sink_caps(struct tcpm_port *port) +{ + struct pd_message msg; + u32 pdo; + unsigned int i, nr_pdo = 0; + + memset(&msg, 0, sizeof(msg)); + + for (i = 0; i < port->nr_snk_pdo; i++) { + if (port->negotiated_rev >= PD_REV30) { + msg.payload[nr_pdo++] = cpu_to_le32(port->snk_pdo[i]); + } else { + pdo = tcpm_forge_legacy_pdo(port, port->snk_pdo[i], TYPEC_SINK); + if (pdo) + msg.payload[nr_pdo++] = cpu_to_le32(pdo); + } + } + + if (!nr_pdo) { + /* No sink capabilities defined, source only */ + msg.header = PD_HEADER_LE(PD_CTRL_REJECT, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, 0); + } else { + msg.header = PD_HEADER_LE(PD_DATA_SINK_CAP, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, + nr_pdo); + } + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +static void mod_tcpm_delayed_work(struct tcpm_port *port, unsigned int delay_ms) +{ + if (delay_ms) { + hrtimer_start(&port->state_machine_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL); + } else { + hrtimer_cancel(&port->state_machine_timer); + kthread_queue_work(port->wq, &port->state_machine); + } +} + +static void mod_vdm_delayed_work(struct tcpm_port *port, unsigned int delay_ms) +{ + if (delay_ms) { + hrtimer_start(&port->vdm_state_machine_timer, ms_to_ktime(delay_ms), + HRTIMER_MODE_REL); + } else { + hrtimer_cancel(&port->vdm_state_machine_timer); + kthread_queue_work(port->wq, &port->vdm_state_machine); + } +} + +static void mod_enable_frs_delayed_work(struct tcpm_port *port, unsigned int delay_ms) +{ + if (delay_ms) { + hrtimer_start(&port->enable_frs_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL); + } else { + hrtimer_cancel(&port->enable_frs_timer); + kthread_queue_work(port->wq, &port->enable_frs); + } +} + +static void mod_send_discover_delayed_work(struct tcpm_port *port, unsigned int delay_ms) +{ + if (delay_ms) { + hrtimer_start(&port->send_discover_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL); + } else { + hrtimer_cancel(&port->send_discover_timer); + kthread_queue_work(port->wq, &port->send_discover_work); + } +} + +static void tcpm_set_state(struct tcpm_port *port, enum tcpm_state state, + unsigned int delay_ms) +{ + if (delay_ms) { + tcpm_log(port, "pending state change %s -> %s @ %u ms [%s %s]", + tcpm_states[port->state], tcpm_states[state], delay_ms, + pd_rev[port->negotiated_rev], tcpm_ams_str[port->ams]); + port->delayed_state = state; + mod_tcpm_delayed_work(port, delay_ms); + port->delayed_runtime = ktime_add(ktime_get(), ms_to_ktime(delay_ms)); + port->delay_ms = delay_ms; + } else { + tcpm_log(port, "state change %s -> %s [%s %s]", + tcpm_states[port->state], tcpm_states[state], + pd_rev[port->negotiated_rev], tcpm_ams_str[port->ams]); + port->delayed_state = INVALID_STATE; + port->prev_state = port->state; + port->state = state; + /* + * Don't re-queue the state machine work item if we're currently + * in the state machine and we're immediately changing states. + * tcpm_state_machine_work() will continue running the state + * machine. + */ + if (!port->state_machine_running) + mod_tcpm_delayed_work(port, 0); + } +} + +static void tcpm_set_state_cond(struct tcpm_port *port, enum tcpm_state state, + unsigned int delay_ms) +{ + if (port->enter_state == port->state) + tcpm_set_state(port, state, delay_ms); + else + tcpm_log(port, + "skipped %sstate change %s -> %s [%u ms], context state %s [%s %s]", + delay_ms ? "delayed " : "", + tcpm_states[port->state], tcpm_states[state], + delay_ms, tcpm_states[port->enter_state], + pd_rev[port->negotiated_rev], tcpm_ams_str[port->ams]); +} + +static void tcpm_queue_message(struct tcpm_port *port, + enum pd_msg_request message) +{ + port->queued_message = message; + mod_tcpm_delayed_work(port, 0); +} + +static bool tcpm_vdm_ams(struct tcpm_port *port) +{ + switch (port->ams) { + case DISCOVER_IDENTITY: + case SOURCE_STARTUP_CABLE_PLUG_DISCOVER_IDENTITY: + case DISCOVER_SVIDS: + case DISCOVER_MODES: + case DFP_TO_UFP_ENTER_MODE: + case DFP_TO_UFP_EXIT_MODE: + case DFP_TO_CABLE_PLUG_ENTER_MODE: + case DFP_TO_CABLE_PLUG_EXIT_MODE: + case ATTENTION: + case UNSTRUCTURED_VDMS: + case STRUCTURED_VDMS: + break; + default: + return false; + } + + return true; +} + +static bool tcpm_ams_interruptible(struct tcpm_port *port) +{ + switch (port->ams) { + /* Interruptible AMS */ + case NONE_AMS: + case SECURITY: + case FIRMWARE_UPDATE: + case DISCOVER_IDENTITY: + case SOURCE_STARTUP_CABLE_PLUG_DISCOVER_IDENTITY: + case DISCOVER_SVIDS: + case DISCOVER_MODES: + case DFP_TO_UFP_ENTER_MODE: + case DFP_TO_UFP_EXIT_MODE: + case DFP_TO_CABLE_PLUG_ENTER_MODE: + case DFP_TO_CABLE_PLUG_EXIT_MODE: + case UNSTRUCTURED_VDMS: + case STRUCTURED_VDMS: + case COUNTRY_INFO: + case COUNTRY_CODES: + break; + /* Non-Interruptible AMS */ + default: + if (port->in_ams) + return false; + break; + } + + return true; +} + +static int tcpm_ams_start(struct tcpm_port *port, enum tcpm_ams ams) +{ + int ret = 0; + + tcpm_log(port, "AMS %s start", tcpm_ams_str[ams]); + + if (!tcpm_ams_interruptible(port) && + !(ams == HARD_RESET || ams == SOFT_RESET_AMS)) { + port->upcoming_state = INVALID_STATE; + tcpm_log(port, "AMS %s not interruptible, aborting", + tcpm_ams_str[port->ams]); + return -EAGAIN; + } + + if (port->pwr_role == TYPEC_SOURCE) { + enum typec_cc_status cc_req = port->cc_req; + + port->ams = ams; + + if (ams == HARD_RESET) { + tcpm_set_cc(port, tcpm_rp_cc(port)); + tcpm_pd_transmit(port, TCPC_TX_HARD_RESET, NULL); + tcpm_set_state(port, HARD_RESET_START, 0); + return ret; + } else if (ams == SOFT_RESET_AMS) { + if (!port->explicit_contract) + tcpm_set_cc(port, tcpm_rp_cc(port)); + tcpm_set_state(port, SOFT_RESET_SEND, 0); + return ret; + } else if (tcpm_vdm_ams(port)) { + /* tSinkTx is enforced in vdm_run_state_machine */ + if (port->negotiated_rev >= PD_REV30) + tcpm_set_cc(port, SINK_TX_NG); + return ret; + } + + if (port->negotiated_rev >= PD_REV30) + tcpm_set_cc(port, SINK_TX_NG); + + switch (port->state) { + case SRC_READY: + case SRC_STARTUP: + case SRC_SOFT_RESET_WAIT_SNK_TX: + case SOFT_RESET: + case SOFT_RESET_SEND: + if (port->negotiated_rev >= PD_REV30) + tcpm_set_state(port, AMS_START, + cc_req == SINK_TX_OK ? + PD_T_SINK_TX : 0); + else + tcpm_set_state(port, AMS_START, 0); + break; + default: + if (port->negotiated_rev >= PD_REV30) + tcpm_set_state(port, SRC_READY, + cc_req == SINK_TX_OK ? + PD_T_SINK_TX : 0); + else + tcpm_set_state(port, SRC_READY, 0); + break; + } + } else { + if (port->negotiated_rev >= PD_REV30 && + !tcpm_sink_tx_ok(port) && + ams != SOFT_RESET_AMS && + ams != HARD_RESET) { + port->upcoming_state = INVALID_STATE; + tcpm_log(port, "Sink TX No Go"); + return -EAGAIN; + } + + port->ams = ams; + + if (ams == HARD_RESET) { + tcpm_pd_transmit(port, TCPC_TX_HARD_RESET, NULL); + tcpm_set_state(port, HARD_RESET_START, 0); + return ret; + } else if (tcpm_vdm_ams(port)) { + return ret; + } + + if (port->state == SNK_READY || + port->state == SNK_SOFT_RESET) + tcpm_set_state(port, AMS_START, 0); + else + tcpm_set_state(port, SNK_READY, 0); + } + + return ret; +} + +/* + * VDM/VDO handling functions + */ +static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header, + const u32 *data, int cnt) +{ + u32 vdo_hdr = port->vdo_data[0]; + + WARN_ON(!mutex_is_locked(&port->lock)); + + /* If is sending discover_identity, handle received message first */ + if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMD(vdo_hdr) == CMD_DISCOVER_IDENT) { + port->send_discover = true; + mod_send_discover_delayed_work(port, SEND_DISCOVER_RETRY_MS); + } else { + /* Make sure we are not still processing a previous VDM packet */ + WARN_ON(port->vdm_state > VDM_STATE_DONE); + } + + port->vdo_count = cnt + 1; + port->vdo_data[0] = header; + memcpy(&port->vdo_data[1], data, sizeof(u32) * cnt); + /* Set ready, vdm state machine will actually send */ + port->vdm_retries = 0; + port->vdm_state = VDM_STATE_READY; + port->vdm_sm_running = true; + + mod_vdm_delayed_work(port, 0); +} + +static void tcpm_queue_vdm_unlocked(struct tcpm_port *port, const u32 header, + const u32 *data, int cnt) +{ + mutex_lock(&port->lock); + tcpm_queue_vdm(port, header, data, cnt); + mutex_unlock(&port->lock); +} + +static void svdm_consume_identity(struct tcpm_port *port, const u32 *p, int cnt) +{ + u32 vdo = p[VDO_INDEX_IDH]; + u32 product = p[VDO_INDEX_PRODUCT]; + + memset(&port->mode_data, 0, sizeof(port->mode_data)); + + port->partner_ident.id_header = vdo; + port->partner_ident.cert_stat = p[VDO_INDEX_CSTAT]; + port->partner_ident.product = product; + + typec_partner_set_identity(port->partner); + + tcpm_log(port, "Identity: %04x:%04x.%04x", + PD_IDH_VID(vdo), + PD_PRODUCT_PID(product), product & 0xffff); +} + +static bool svdm_consume_svids(struct tcpm_port *port, const u32 *p, int cnt) +{ + struct pd_mode_data *pmdata = &port->mode_data; + int i; + + for (i = 1; i < cnt; i++) { + u16 svid; + + svid = (p[i] >> 16) & 0xffff; + if (!svid) + return false; + + if (pmdata->nsvids >= SVID_DISCOVERY_MAX) + goto abort; + + pmdata->svids[pmdata->nsvids++] = svid; + tcpm_log(port, "SVID %d: 0x%x", pmdata->nsvids, svid); + + svid = p[i] & 0xffff; + if (!svid) + return false; + + if (pmdata->nsvids >= SVID_DISCOVERY_MAX) + goto abort; + + pmdata->svids[pmdata->nsvids++] = svid; + tcpm_log(port, "SVID %d: 0x%x", pmdata->nsvids, svid); + } + + /* + * PD3.0 Spec 6.4.4.3.2: The SVIDs are returned 2 per VDO (see Table + * 6-43), and can be returned maximum 6 VDOs per response (see Figure + * 6-19). If the Respondersupports 12 or more SVID then the Discover + * SVIDs Command Shall be executed multiple times until a Discover + * SVIDs VDO is returned ending either with a SVID value of 0x0000 in + * the last part of the last VDO or with a VDO containing two SVIDs + * with values of 0x0000. + * + * However, some odd dockers support SVIDs less than 12 but without + * 0x0000 in the last VDO, so we need to break the Discover SVIDs + * request and return false here. + */ + return cnt == 7; +abort: + tcpm_log(port, "SVID_DISCOVERY_MAX(%d) too low!", SVID_DISCOVERY_MAX); + return false; +} + +static void svdm_consume_modes(struct tcpm_port *port, const u32 *p, int cnt) +{ + struct pd_mode_data *pmdata = &port->mode_data; + struct typec_altmode_desc *paltmode; + int i; + + if (pmdata->altmodes >= ARRAY_SIZE(port->partner_altmode)) { + /* Already logged in svdm_consume_svids() */ + return; + } + + for (i = 1; i < cnt; i++) { + paltmode = &pmdata->altmode_desc[pmdata->altmodes]; + memset(paltmode, 0, sizeof(*paltmode)); + + paltmode->svid = pmdata->svids[pmdata->svid_index]; + paltmode->mode = i; + paltmode->vdo = p[i]; + + tcpm_log(port, " Alternate mode %d: SVID 0x%04x, VDO %d: 0x%08x", + pmdata->altmodes, paltmode->svid, + paltmode->mode, paltmode->vdo); + + pmdata->altmodes++; + } +} + +static void tcpm_register_partner_altmodes(struct tcpm_port *port) +{ + struct pd_mode_data *modep = &port->mode_data; + struct typec_altmode *altmode; + int i; + + for (i = 0; i < modep->altmodes; i++) { + altmode = typec_partner_register_altmode(port->partner, + &modep->altmode_desc[i]); + if (IS_ERR(altmode)) { + tcpm_log(port, "Failed to register partner SVID 0x%04x", + modep->altmode_desc[i].svid); + altmode = NULL; + } + port->partner_altmode[i] = altmode; + } +} + +#define supports_modal(port) PD_IDH_MODAL_SUPP((port)->partner_ident.id_header) + +static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev, + const u32 *p, int cnt, u32 *response, + enum adev_actions *adev_action) +{ + struct typec_port *typec = port->typec_port; + struct typec_altmode *pdev; + struct pd_mode_data *modep; + int svdm_version; + int rlen = 0; + int cmd_type; + int cmd; + int i; + + cmd_type = PD_VDO_CMDT(p[0]); + cmd = PD_VDO_CMD(p[0]); + + tcpm_log(port, "Rx VDM cmd 0x%x type %d cmd %d len %d", + p[0], cmd_type, cmd, cnt); + + modep = &port->mode_data; + + pdev = typec_match_altmode(port->partner_altmode, ALTMODE_DISCOVERY_MAX, + PD_VDO_VID(p[0]), PD_VDO_OPOS(p[0])); + + svdm_version = typec_get_negotiated_svdm_version(typec); + if (svdm_version < 0) + return 0; + + switch (cmd_type) { + case CMDT_INIT: + switch (cmd) { + case CMD_DISCOVER_IDENT: + if (PD_VDO_VID(p[0]) != USB_SID_PD) + break; + + if (IS_ERR_OR_NULL(port->partner)) + break; + + if (PD_VDO_SVDM_VER(p[0]) < svdm_version) { + typec_partner_set_svdm_version(port->partner, + PD_VDO_SVDM_VER(p[0])); + svdm_version = PD_VDO_SVDM_VER(p[0]); + } + + port->ams = DISCOVER_IDENTITY; + /* + * PD2.0 Spec 6.10.3: respond with NAK as DFP (data host) + * PD3.1 Spec 6.4.4.2.5.1: respond with NAK if "invalid field" or + * "wrong configuation" or "Unrecognized" + */ + if ((port->data_role == TYPEC_DEVICE || svdm_version >= SVDM_VER_2_0) && + port->nr_snk_vdo) { + if (svdm_version < SVDM_VER_2_0) { + for (i = 0; i < port->nr_snk_vdo_v1; i++) + response[i + 1] = port->snk_vdo_v1[i]; + rlen = port->nr_snk_vdo_v1 + 1; + + } else { + for (i = 0; i < port->nr_snk_vdo; i++) + response[i + 1] = port->snk_vdo[i]; + rlen = port->nr_snk_vdo + 1; + } + } + break; + case CMD_DISCOVER_SVID: + port->ams = DISCOVER_SVIDS; + break; + case CMD_DISCOVER_MODES: + port->ams = DISCOVER_MODES; + break; + case CMD_ENTER_MODE: + port->ams = DFP_TO_UFP_ENTER_MODE; + break; + case CMD_EXIT_MODE: + port->ams = DFP_TO_UFP_EXIT_MODE; + break; + case CMD_ATTENTION: + /* Attention command does not have response */ + *adev_action = ADEV_ATTENTION; + return 0; + default: + break; + } + if (rlen >= 1) { + response[0] = p[0] | VDO_CMDT(CMDT_RSP_ACK); + } else if (rlen == 0) { + response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK); + rlen = 1; + } else { + response[0] = p[0] | VDO_CMDT(CMDT_RSP_BUSY); + rlen = 1; + } + response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) | + (VDO_SVDM_VERS(typec_get_negotiated_svdm_version(typec))); + break; + case CMDT_RSP_ACK: + /* silently drop message if we are not connected */ + if (IS_ERR_OR_NULL(port->partner)) + break; + + tcpm_ams_finish(port); + + switch (cmd) { + case CMD_DISCOVER_IDENT: + if (PD_VDO_SVDM_VER(p[0]) < svdm_version) + typec_partner_set_svdm_version(port->partner, + PD_VDO_SVDM_VER(p[0])); + /* 6.4.4.3.1 */ + svdm_consume_identity(port, p, cnt); + response[0] = VDO(USB_SID_PD, 1, typec_get_negotiated_svdm_version(typec), + CMD_DISCOVER_SVID); + rlen = 1; + break; + case CMD_DISCOVER_SVID: + /* 6.4.4.3.2 */ + if (svdm_consume_svids(port, p, cnt)) { + response[0] = VDO(USB_SID_PD, 1, svdm_version, CMD_DISCOVER_SVID); + rlen = 1; + } else if (modep->nsvids && supports_modal(port)) { + response[0] = VDO(modep->svids[0], 1, svdm_version, + CMD_DISCOVER_MODES); + rlen = 1; + } + break; + case CMD_DISCOVER_MODES: + /* 6.4.4.3.3 */ + svdm_consume_modes(port, p, cnt); + modep->svid_index++; + if (modep->svid_index < modep->nsvids) { + u16 svid = modep->svids[modep->svid_index]; + response[0] = VDO(svid, 1, svdm_version, CMD_DISCOVER_MODES); + rlen = 1; + } else { + tcpm_register_partner_altmodes(port); + } + break; + case CMD_ENTER_MODE: + if (adev && pdev) + *adev_action = ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL; + return 0; + case CMD_EXIT_MODE: + if (adev && pdev) { + /* Back to USB Operation */ + *adev_action = ADEV_NOTIFY_USB_AND_QUEUE_VDM; + return 0; + } + break; + case VDO_CMD_VENDOR(0) ... VDO_CMD_VENDOR(15): + break; + default: + /* Unrecognized SVDM */ + response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK); + rlen = 1; + response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) | + (VDO_SVDM_VERS(svdm_version)); + break; + } + break; + case CMDT_RSP_NAK: + tcpm_ams_finish(port); + switch (cmd) { + case CMD_DISCOVER_IDENT: + case CMD_DISCOVER_SVID: + case CMD_DISCOVER_MODES: + case VDO_CMD_VENDOR(0) ... VDO_CMD_VENDOR(15): + break; + case CMD_ENTER_MODE: + /* Back to USB Operation */ + *adev_action = ADEV_NOTIFY_USB_AND_QUEUE_VDM; + return 0; + default: + /* Unrecognized SVDM */ + response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK); + rlen = 1; + response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) | + (VDO_SVDM_VERS(svdm_version)); + break; + } + break; + default: + response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK); + rlen = 1; + response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) | + (VDO_SVDM_VERS(svdm_version)); + break; + } + + /* Informing the alternate mode drivers about everything */ + *adev_action = ADEV_QUEUE_VDM; + return rlen; +} + +static void tcpm_pd_handle_msg(struct tcpm_port *port, + enum pd_msg_request message, + enum tcpm_ams ams); + +static void tcpm_handle_vdm_request(struct tcpm_port *port, + const __le32 *payload, int cnt) +{ + enum adev_actions adev_action = ADEV_NONE; + struct typec_altmode *adev; + u32 p[PD_MAX_PAYLOAD]; + u32 response[8] = { }; + int i, rlen = 0; + + for (i = 0; i < cnt; i++) + p[i] = le32_to_cpu(payload[i]); + + adev = typec_match_altmode(port->port_altmode, ALTMODE_DISCOVERY_MAX, + PD_VDO_VID(p[0]), PD_VDO_OPOS(p[0])); + + if (port->vdm_state == VDM_STATE_BUSY) { + /* If UFP responded busy retry after timeout */ + if (PD_VDO_CMDT(p[0]) == CMDT_RSP_BUSY) { + port->vdm_state = VDM_STATE_WAIT_RSP_BUSY; + port->vdo_retry = (p[0] & ~VDO_CMDT_MASK) | + CMDT_INIT; + mod_vdm_delayed_work(port, PD_T_VDM_BUSY); + return; + } + port->vdm_state = VDM_STATE_DONE; + } + + if (PD_VDO_SVDM(p[0]) && (adev || tcpm_vdm_ams(port) || port->nr_snk_vdo)) { + /* + * Here a SVDM is received (INIT or RSP or unknown). Set the vdm_sm_running in + * advance because we are dropping the lock but may send VDMs soon. + * For the cases of INIT received: + * - If no response to send, it will be cleared later in this function. + * - If there are responses to send, it will be cleared in the state machine. + * For the cases of RSP received: + * - If no further INIT to send, it will be cleared later in this function. + * - Otherwise, it will be cleared in the state machine if timeout or it will go + * back here until no further INIT to send. + * For the cases of unknown type received: + * - We will send NAK and the flag will be cleared in the state machine. + */ + port->vdm_sm_running = true; + rlen = tcpm_pd_svdm(port, adev, p, cnt, response, &adev_action); + } else { + if (port->negotiated_rev >= PD_REV30) + tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS); + } + + /* + * We are done with any state stored in the port struct now, except + * for any port struct changes done by the tcpm_queue_vdm() call + * below, which is a separate operation. + * + * So we can safely release the lock here; and we MUST release the + * lock here to avoid an AB BA lock inversion: + * + * If we keep the lock here then the lock ordering in this path is: + * 1. tcpm_pd_rx_handler take the tcpm port lock + * 2. One of the typec_altmode_* calls below takes the alt-mode's lock + * + * And we also have this ordering: + * 1. alt-mode driver takes the alt-mode's lock + * 2. alt-mode driver calls tcpm_altmode_enter which takes the + * tcpm port lock + * + * Dropping our lock here avoids this. + */ + mutex_unlock(&port->lock); + + if (adev) { + switch (adev_action) { + case ADEV_NONE: + break; + case ADEV_NOTIFY_USB_AND_QUEUE_VDM: + WARN_ON(typec_altmode_notify(adev, TYPEC_STATE_USB, NULL)); + typec_altmode_vdm(adev, p[0], &p[1], cnt); + break; + case ADEV_QUEUE_VDM: + typec_altmode_vdm(adev, p[0], &p[1], cnt); + break; + case ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL: + if (typec_altmode_vdm(adev, p[0], &p[1], cnt)) { + int svdm_version = typec_get_negotiated_svdm_version( + port->typec_port); + if (svdm_version < 0) + break; + + response[0] = VDO(adev->svid, 1, svdm_version, + CMD_EXIT_MODE); + response[0] |= VDO_OPOS(adev->mode); + rlen = 1; + } + break; + case ADEV_ATTENTION: + if (typec_altmode_attention(adev, p[1])) + tcpm_log(port, "typec_altmode_attention no port partner altmode"); + break; + } + } + + /* + * We must re-take the lock here to balance the unlock in + * tcpm_pd_rx_handler, note that no changes, other then the + * tcpm_queue_vdm call, are made while the lock is held again. + * All that is done after the call is unwinding the call stack until + * we return to tcpm_pd_rx_handler and do the unlock there. + */ + mutex_lock(&port->lock); + + if (rlen > 0) + tcpm_queue_vdm(port, response[0], &response[1], rlen - 1); + else + port->vdm_sm_running = false; +} + +static void tcpm_send_vdm(struct tcpm_port *port, u32 vid, int cmd, + const u32 *data, int count) +{ + int svdm_version = typec_get_negotiated_svdm_version(port->typec_port); + u32 header; + + if (svdm_version < 0) + return; + + if (WARN_ON(count > VDO_MAX_SIZE - 1)) + count = VDO_MAX_SIZE - 1; + + /* set VDM header with VID & CMD */ + header = VDO(vid, ((vid & USB_SID_PD) == USB_SID_PD) ? + 1 : (PD_VDO_CMD(cmd) <= CMD_ATTENTION), + svdm_version, cmd); + tcpm_queue_vdm(port, header, data, count); +} + +static unsigned int vdm_ready_timeout(u32 vdm_hdr) +{ + unsigned int timeout; + int cmd = PD_VDO_CMD(vdm_hdr); + + /* its not a structured VDM command */ + if (!PD_VDO_SVDM(vdm_hdr)) + return PD_T_VDM_UNSTRUCTURED; + + switch (PD_VDO_CMDT(vdm_hdr)) { + case CMDT_INIT: + if (cmd == CMD_ENTER_MODE || cmd == CMD_EXIT_MODE) + timeout = PD_T_VDM_WAIT_MODE_E; + else + timeout = PD_T_VDM_SNDR_RSP; + break; + default: + if (cmd == CMD_ENTER_MODE || cmd == CMD_EXIT_MODE) + timeout = PD_T_VDM_E_MODE; + else + timeout = PD_T_VDM_RCVR_RSP; + break; + } + return timeout; +} + +static void vdm_run_state_machine(struct tcpm_port *port) +{ + struct pd_message msg; + int i, res = 0; + u32 vdo_hdr = port->vdo_data[0]; + + switch (port->vdm_state) { + case VDM_STATE_READY: + /* Only transmit VDM if attached */ + if (!port->attached) { + port->vdm_state = VDM_STATE_ERR_BUSY; + break; + } + + /* + * if there's traffic or we're not in PDO ready state don't send + * a VDM. + */ + if (port->state != SRC_READY && port->state != SNK_READY) { + port->vdm_sm_running = false; + break; + } + + /* TODO: AMS operation for Unstructured VDM */ + if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMDT(vdo_hdr) == CMDT_INIT) { + switch (PD_VDO_CMD(vdo_hdr)) { + case CMD_DISCOVER_IDENT: + res = tcpm_ams_start(port, DISCOVER_IDENTITY); + if (res == 0) { + port->send_discover = false; + } else if (res == -EAGAIN) { + port->vdo_data[0] = 0; + mod_send_discover_delayed_work(port, + SEND_DISCOVER_RETRY_MS); + } + break; + case CMD_DISCOVER_SVID: + res = tcpm_ams_start(port, DISCOVER_SVIDS); + break; + case CMD_DISCOVER_MODES: + res = tcpm_ams_start(port, DISCOVER_MODES); + break; + case CMD_ENTER_MODE: + res = tcpm_ams_start(port, DFP_TO_UFP_ENTER_MODE); + break; + case CMD_EXIT_MODE: + res = tcpm_ams_start(port, DFP_TO_UFP_EXIT_MODE); + break; + case CMD_ATTENTION: + res = tcpm_ams_start(port, ATTENTION); + break; + case VDO_CMD_VENDOR(0) ... VDO_CMD_VENDOR(15): + res = tcpm_ams_start(port, STRUCTURED_VDMS); + break; + default: + res = -EOPNOTSUPP; + break; + } + + if (res < 0) { + port->vdm_state = VDM_STATE_ERR_BUSY; + return; + } + } + + port->vdm_state = VDM_STATE_SEND_MESSAGE; + mod_vdm_delayed_work(port, (port->negotiated_rev >= PD_REV30 && + port->pwr_role == TYPEC_SOURCE && + PD_VDO_SVDM(vdo_hdr) && + PD_VDO_CMDT(vdo_hdr) == CMDT_INIT) ? + PD_T_SINK_TX : 0); + break; + case VDM_STATE_WAIT_RSP_BUSY: + port->vdo_data[0] = port->vdo_retry; + port->vdo_count = 1; + port->vdm_state = VDM_STATE_READY; + tcpm_ams_finish(port); + break; + case VDM_STATE_BUSY: + port->vdm_state = VDM_STATE_ERR_TMOUT; + if (port->ams != NONE_AMS) + tcpm_ams_finish(port); + break; + case VDM_STATE_ERR_SEND: + /* + * A partner which does not support USB PD will not reply, + * so this is not a fatal error. At the same time, some + * devices may not return GoodCRC under some circumstances, + * so we need to retry. + */ + if (port->vdm_retries < 3) { + tcpm_log(port, "VDM Tx error, retry"); + port->vdm_retries++; + port->vdm_state = VDM_STATE_READY; + if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMDT(vdo_hdr) == CMDT_INIT) + tcpm_ams_finish(port); + } else { + tcpm_ams_finish(port); + } + break; + case VDM_STATE_SEND_MESSAGE: + /* Prepare and send VDM */ + memset(&msg, 0, sizeof(msg)); + msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, port->vdo_count); + for (i = 0; i < port->vdo_count; i++) + msg.payload[i] = cpu_to_le32(port->vdo_data[i]); + res = tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); + if (res < 0) { + port->vdm_state = VDM_STATE_ERR_SEND; + } else { + unsigned long timeout; + + port->vdm_retries = 0; + port->vdo_data[0] = 0; + port->vdm_state = VDM_STATE_BUSY; + timeout = vdm_ready_timeout(vdo_hdr); + mod_vdm_delayed_work(port, timeout); + } + break; + default: + break; + } +} + +static void vdm_state_machine_work(struct kthread_work *work) +{ + struct tcpm_port *port = container_of(work, struct tcpm_port, vdm_state_machine); + enum vdm_states prev_state; + + mutex_lock(&port->lock); + + /* + * Continue running as long as the port is not busy and there was + * a state change. + */ + do { + prev_state = port->vdm_state; + vdm_run_state_machine(port); + } while (port->vdm_state != prev_state && + port->vdm_state != VDM_STATE_BUSY && + port->vdm_state != VDM_STATE_SEND_MESSAGE); + + if (port->vdm_state < VDM_STATE_READY) + port->vdm_sm_running = false; + + mutex_unlock(&port->lock); +} + +enum pdo_err { + PDO_NO_ERR, + PDO_ERR_NO_VSAFE5V, + PDO_ERR_VSAFE5V_NOT_FIRST, + PDO_ERR_PDO_TYPE_NOT_IN_ORDER, + PDO_ERR_FIXED_NOT_SORTED, + PDO_ERR_VARIABLE_BATT_NOT_SORTED, + PDO_ERR_DUPE_PDO, + PDO_ERR_PPS_APDO_NOT_SORTED, + PDO_ERR_DUPE_PPS_APDO, +}; + +static const char * const pdo_err_msg[] = { + [PDO_ERR_NO_VSAFE5V] = + " err: source/sink caps should at least have vSafe5V", + [PDO_ERR_VSAFE5V_NOT_FIRST] = + " err: vSafe5V Fixed Supply Object Shall always be the first object", + [PDO_ERR_PDO_TYPE_NOT_IN_ORDER] = + " err: PDOs should be in the following order: Fixed; Battery; Variable", + [PDO_ERR_FIXED_NOT_SORTED] = + " err: Fixed supply pdos should be in increasing order of their fixed voltage", + [PDO_ERR_VARIABLE_BATT_NOT_SORTED] = + " err: Variable/Battery supply pdos should be in increasing order of their minimum voltage", + [PDO_ERR_DUPE_PDO] = + " err: Variable/Batt supply pdos cannot have same min/max voltage", + [PDO_ERR_PPS_APDO_NOT_SORTED] = + " err: Programmable power supply apdos should be in increasing order of their maximum voltage", + [PDO_ERR_DUPE_PPS_APDO] = + " err: Programmable power supply apdos cannot have same min/max voltage and max current", +}; + +static enum pdo_err tcpm_caps_err(struct tcpm_port *port, const u32 *pdo, + unsigned int nr_pdo) +{ + unsigned int i; + + /* Should at least contain vSafe5v */ + if (nr_pdo < 1) + return PDO_ERR_NO_VSAFE5V; + + /* The vSafe5V Fixed Supply Object Shall always be the first object */ + if (pdo_type(pdo[0]) != PDO_TYPE_FIXED || + pdo_fixed_voltage(pdo[0]) != VSAFE5V) + return PDO_ERR_VSAFE5V_NOT_FIRST; + + for (i = 1; i < nr_pdo; i++) { + if (pdo_type(pdo[i]) < pdo_type(pdo[i - 1])) { + return PDO_ERR_PDO_TYPE_NOT_IN_ORDER; + } else if (pdo_type(pdo[i]) == pdo_type(pdo[i - 1])) { + enum pd_pdo_type type = pdo_type(pdo[i]); + + switch (type) { + /* + * The remaining Fixed Supply Objects, if + * present, shall be sent in voltage order; + * lowest to highest. + */ + case PDO_TYPE_FIXED: + if (pdo_fixed_voltage(pdo[i]) <= + pdo_fixed_voltage(pdo[i - 1])) + return PDO_ERR_FIXED_NOT_SORTED; + break; + /* + * The Battery Supply Objects and Variable + * supply, if present shall be sent in Minimum + * Voltage order; lowest to highest. + */ + case PDO_TYPE_VAR: + case PDO_TYPE_BATT: + if (pdo_min_voltage(pdo[i]) < + pdo_min_voltage(pdo[i - 1])) + return PDO_ERR_VARIABLE_BATT_NOT_SORTED; + else if ((pdo_min_voltage(pdo[i]) == + pdo_min_voltage(pdo[i - 1])) && + (pdo_max_voltage(pdo[i]) == + pdo_max_voltage(pdo[i - 1]))) + return PDO_ERR_DUPE_PDO; + break; + /* + * The Programmable Power Supply APDOs, if present, + * shall be sent in Maximum Voltage order; + * lowest to highest. + */ + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo[i]) != APDO_TYPE_PPS) + break; + + if (pdo_pps_apdo_max_voltage(pdo[i]) < + pdo_pps_apdo_max_voltage(pdo[i - 1])) + return PDO_ERR_PPS_APDO_NOT_SORTED; + else if (pdo_pps_apdo_min_voltage(pdo[i]) == + pdo_pps_apdo_min_voltage(pdo[i - 1]) && + pdo_pps_apdo_max_voltage(pdo[i]) == + pdo_pps_apdo_max_voltage(pdo[i - 1]) && + pdo_pps_apdo_max_current(pdo[i]) == + pdo_pps_apdo_max_current(pdo[i - 1])) + return PDO_ERR_DUPE_PPS_APDO; + break; + default: + tcpm_log_force(port, " Unknown pdo type"); + } + } + } + + return PDO_NO_ERR; +} + +static int tcpm_validate_caps(struct tcpm_port *port, const u32 *pdo, + unsigned int nr_pdo) +{ + enum pdo_err err_index = tcpm_caps_err(port, pdo, nr_pdo); + + if (err_index != PDO_NO_ERR) { + tcpm_log_force(port, " %s", pdo_err_msg[err_index]); + return -EINVAL; + } + + return 0; +} + +static int tcpm_altmode_enter(struct typec_altmode *altmode, u32 *vdo) +{ + struct tcpm_port *port = typec_altmode_get_drvdata(altmode); + int svdm_version; + u32 header; + + svdm_version = typec_get_negotiated_svdm_version(port->typec_port); + if (svdm_version < 0) + return svdm_version; + + header = VDO(altmode->svid, vdo ? 2 : 1, svdm_version, CMD_ENTER_MODE); + header |= VDO_OPOS(altmode->mode); + + tcpm_queue_vdm_unlocked(port, header, vdo, vdo ? 1 : 0); + return 0; +} + +static int tcpm_altmode_exit(struct typec_altmode *altmode) +{ + struct tcpm_port *port = typec_altmode_get_drvdata(altmode); + int svdm_version; + u32 header; + + svdm_version = typec_get_negotiated_svdm_version(port->typec_port); + if (svdm_version < 0) + return svdm_version; + + header = VDO(altmode->svid, 1, svdm_version, CMD_EXIT_MODE); + header |= VDO_OPOS(altmode->mode); + + tcpm_queue_vdm_unlocked(port, header, NULL, 0); + return 0; +} + +static int tcpm_altmode_vdm(struct typec_altmode *altmode, + u32 header, const u32 *data, int count) +{ + struct tcpm_port *port = typec_altmode_get_drvdata(altmode); + + tcpm_queue_vdm_unlocked(port, header, data, count - 1); + + return 0; +} + +static const struct typec_altmode_ops tcpm_altmode_ops = { + .enter = tcpm_altmode_enter, + .exit = tcpm_altmode_exit, + .vdm = tcpm_altmode_vdm, +}; + +/* + * PD (data, control) command handling functions + */ +static inline enum tcpm_state ready_state(struct tcpm_port *port) +{ + if (port->pwr_role == TYPEC_SOURCE) + return SRC_READY; + else + return SNK_READY; +} + +static int tcpm_pd_send_control(struct tcpm_port *port, + enum pd_ctrl_msg_type type); + +static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload, + int cnt) +{ + u32 p0 = le32_to_cpu(payload[0]); + unsigned int type = usb_pd_ado_type(p0); + + if (!type) { + tcpm_log(port, "Alert message received with no type"); + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); + return; + } + + /* Just handling non-battery alerts for now */ + if (!(type & USB_PD_ADO_TYPE_BATT_STATUS_CHANGE)) { + if (port->pwr_role == TYPEC_SOURCE) { + port->upcoming_state = GET_STATUS_SEND; + tcpm_ams_start(port, GETTING_SOURCE_SINK_STATUS); + } else { + /* + * Do not check SinkTxOk here in case the Source doesn't set its Rp to + * SinkTxOk in time. + */ + port->ams = GETTING_SOURCE_SINK_STATUS; + tcpm_set_state(port, GET_STATUS_SEND, 0); + } + } else { + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); + } +} + +static int tcpm_set_auto_vbus_discharge_threshold(struct tcpm_port *port, + enum typec_pwr_opmode mode, bool pps_active, + u32 requested_vbus_voltage) +{ + int ret; + + if (!port->tcpc->set_auto_vbus_discharge_threshold) + return 0; + + ret = port->tcpc->set_auto_vbus_discharge_threshold(port->tcpc, mode, pps_active, + requested_vbus_voltage); + tcpm_log_force(port, + "set_auto_vbus_discharge_threshold mode:%d pps_active:%c vbus:%u ret:%d", + mode, pps_active ? 'y' : 'n', requested_vbus_voltage, ret); + + return ret; +} + +static void tcpm_pd_handle_state(struct tcpm_port *port, + enum tcpm_state state, + enum tcpm_ams ams, + unsigned int delay_ms) +{ + switch (port->state) { + case SRC_READY: + case SNK_READY: + port->ams = ams; + tcpm_set_state(port, state, delay_ms); + break; + /* 8.3.3.4.1.1 and 6.8.1 power transitioning */ + case SNK_TRANSITION_SINK: + case SNK_TRANSITION_SINK_VBUS: + case SRC_TRANSITION_SUPPLY: + tcpm_set_state(port, HARD_RESET_SEND, 0); + break; + default: + if (!tcpm_ams_interruptible(port)) { + tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ? + SRC_SOFT_RESET_WAIT_SNK_TX : + SNK_SOFT_RESET, + 0); + } else { + /* process the Message 6.8.1 */ + port->upcoming_state = state; + port->next_ams = ams; + tcpm_set_state(port, ready_state(port), delay_ms); + } + break; + } +} + +static void tcpm_pd_handle_msg(struct tcpm_port *port, + enum pd_msg_request message, + enum tcpm_ams ams) +{ + switch (port->state) { + case SRC_READY: + case SNK_READY: + port->ams = ams; + tcpm_queue_message(port, message); + break; + /* PD 3.0 Spec 8.3.3.4.1.1 and 6.8.1 */ + case SNK_TRANSITION_SINK: + case SNK_TRANSITION_SINK_VBUS: + case SRC_TRANSITION_SUPPLY: + tcpm_set_state(port, HARD_RESET_SEND, 0); + break; + default: + if (!tcpm_ams_interruptible(port)) { + tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ? + SRC_SOFT_RESET_WAIT_SNK_TX : + SNK_SOFT_RESET, + 0); + } else { + port->next_ams = ams; + tcpm_set_state(port, ready_state(port), 0); + /* 6.8.1 process the Message */ + tcpm_queue_message(port, message); + } + break; + } +} + +static int tcpm_register_source_caps(struct tcpm_port *port) +{ + struct usb_power_delivery_desc desc = { port->negotiated_rev }; + struct usb_power_delivery_capabilities_desc caps = { }; + struct usb_power_delivery_capabilities *cap; + + if (!port->partner_pd) + port->partner_pd = usb_power_delivery_register(NULL, &desc); + if (IS_ERR(port->partner_pd)) + return PTR_ERR(port->partner_pd); + + memcpy(caps.pdo, port->source_caps, sizeof(u32) * port->nr_source_caps); + caps.role = TYPEC_SOURCE; + + cap = usb_power_delivery_register_capabilities(port->partner_pd, &caps); + if (IS_ERR(cap)) + return PTR_ERR(cap); + + port->partner_source_caps = cap; + + return 0; +} + +static int tcpm_register_sink_caps(struct tcpm_port *port) +{ + struct usb_power_delivery_desc desc = { port->negotiated_rev }; + struct usb_power_delivery_capabilities_desc caps = { }; + struct usb_power_delivery_capabilities *cap; + + if (!port->partner_pd) + port->partner_pd = usb_power_delivery_register(NULL, &desc); + if (IS_ERR(port->partner_pd)) + return PTR_ERR(port->partner_pd); + + memcpy(caps.pdo, port->sink_caps, sizeof(u32) * port->nr_sink_caps); + caps.role = TYPEC_SINK; + + cap = usb_power_delivery_register_capabilities(port->partner_pd, &caps); + if (IS_ERR(cap)) + return PTR_ERR(cap); + + port->partner_sink_caps = cap; + + return 0; +} + +static void tcpm_pd_data_request(struct tcpm_port *port, + const struct pd_message *msg) +{ + enum pd_data_msg_type type = pd_header_type_le(msg->header); + unsigned int cnt = pd_header_cnt_le(msg->header); + unsigned int rev = pd_header_rev_le(msg->header); + unsigned int i; + enum frs_typec_current partner_frs_current; + bool frs_enable; + int ret; + + if (tcpm_vdm_ams(port) && type != PD_DATA_VENDOR_DEF) { + port->vdm_state = VDM_STATE_ERR_BUSY; + tcpm_ams_finish(port); + mod_vdm_delayed_work(port, 0); + } + + switch (type) { + case PD_DATA_SOURCE_CAP: + for (i = 0; i < cnt; i++) + port->source_caps[i] = le32_to_cpu(msg->payload[i]); + + port->nr_source_caps = cnt; + + tcpm_log_source_caps(port); + + tcpm_validate_caps(port, port->source_caps, + port->nr_source_caps); + + tcpm_register_source_caps(port); + + /* + * Adjust revision in subsequent message headers, as required, + * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't + * support Rev 1.0 so just do nothing in that scenario. + */ + if (rev == PD_REV10) { + if (port->ams == GET_SOURCE_CAPABILITIES) + tcpm_ams_finish(port); + break; + } + + if (rev < PD_MAX_REV) + port->negotiated_rev = rev; + + if (port->pwr_role == TYPEC_SOURCE) { + if (port->ams == GET_SOURCE_CAPABILITIES) + tcpm_pd_handle_state(port, SRC_READY, NONE_AMS, 0); + /* Unexpected Source Capabilities */ + else + tcpm_pd_handle_msg(port, + port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + } else if (port->state == SNK_WAIT_CAPABILITIES) { + /* + * This message may be received even if VBUS is not + * present. This is quite unexpected; see USB PD + * specification, sections 8.3.3.6.3.1 and 8.3.3.6.3.2. + * However, at the same time, we must be ready to + * receive this message and respond to it 15ms after + * receiving PS_RDY during power swap operations, no matter + * if VBUS is available or not (USB PD specification, + * section 6.5.9.2). + * So we need to accept the message either way, + * but be prepared to keep waiting for VBUS after it was + * handled. + */ + port->ams = POWER_NEGOTIATION; + port->in_ams = true; + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + } else { + if (port->ams == GET_SOURCE_CAPABILITIES) + tcpm_ams_finish(port); + tcpm_pd_handle_state(port, SNK_NEGOTIATE_CAPABILITIES, + POWER_NEGOTIATION, 0); + } + break; + case PD_DATA_REQUEST: + /* + * Adjust revision in subsequent message headers, as required, + * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't + * support Rev 1.0 so just reject in that scenario. + */ + if (rev == PD_REV10) { + tcpm_pd_handle_msg(port, + port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + break; + } + + if (rev < PD_MAX_REV) + port->negotiated_rev = rev; + + if (port->pwr_role != TYPEC_SOURCE || cnt != 1) { + tcpm_pd_handle_msg(port, + port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + break; + } + + port->sink_request = le32_to_cpu(msg->payload[0]); + + if (port->vdm_sm_running && port->explicit_contract) { + tcpm_pd_handle_msg(port, PD_MSG_CTRL_WAIT, port->ams); + break; + } + + if (port->state == SRC_SEND_CAPABILITIES) + tcpm_set_state(port, SRC_NEGOTIATE_CAPABILITIES, 0); + else + tcpm_pd_handle_state(port, SRC_NEGOTIATE_CAPABILITIES, + POWER_NEGOTIATION, 0); + break; + case PD_DATA_SINK_CAP: + /* We don't do anything with this at the moment... */ + for (i = 0; i < cnt; i++) + port->sink_caps[i] = le32_to_cpu(msg->payload[i]); + + partner_frs_current = (port->sink_caps[0] & PDO_FIXED_FRS_CURR_MASK) >> + PDO_FIXED_FRS_CURR_SHIFT; + frs_enable = partner_frs_current && (partner_frs_current <= + port->new_source_frs_current); + tcpm_log(port, + "Port partner FRS capable partner_frs_current:%u port_frs_current:%u enable:%c", + partner_frs_current, port->new_source_frs_current, frs_enable ? 'y' : 'n'); + if (frs_enable) { + ret = port->tcpc->enable_frs(port->tcpc, true); + tcpm_log(port, "Enable FRS %s, ret:%d\n", ret ? "fail" : "success", ret); + } + + port->nr_sink_caps = cnt; + port->sink_cap_done = true; + tcpm_register_sink_caps(port); + + if (port->ams == GET_SINK_CAPABILITIES) + tcpm_set_state(port, ready_state(port), 0); + /* Unexpected Sink Capabilities */ + else + tcpm_pd_handle_msg(port, + port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + break; + case PD_DATA_VENDOR_DEF: + tcpm_handle_vdm_request(port, msg->payload, cnt); + break; + case PD_DATA_BIST: + port->bist_request = le32_to_cpu(msg->payload[0]); + tcpm_pd_handle_state(port, BIST_RX, BIST, 0); + break; + case PD_DATA_ALERT: + if (port->state != SRC_READY && port->state != SNK_READY) + tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ? + SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET, + NONE_AMS, 0); + else + tcpm_handle_alert(port, msg->payload, cnt); + break; + case PD_DATA_BATT_STATUS: + case PD_DATA_GET_COUNTRY_INFO: + /* Currently unsupported */ + tcpm_pd_handle_msg(port, port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + break; + default: + tcpm_pd_handle_msg(port, port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + tcpm_log(port, "Unrecognized data message type %#x", type); + break; + } +} + +static void tcpm_pps_complete(struct tcpm_port *port, int result) +{ + if (port->pps_pending) { + port->pps_status = result; + port->pps_pending = false; + complete(&port->pps_complete); + } +} + +static void tcpm_pd_ctrl_request(struct tcpm_port *port, + const struct pd_message *msg) +{ + enum pd_ctrl_msg_type type = pd_header_type_le(msg->header); + enum tcpm_state next_state; + + /* + * Stop VDM state machine if interrupted by other Messages while NOT_SUPP is allowed in + * VDM AMS if waiting for VDM responses and will be handled later. + */ + if (tcpm_vdm_ams(port) && type != PD_CTRL_NOT_SUPP && type != PD_CTRL_GOOD_CRC) { + port->vdm_state = VDM_STATE_ERR_BUSY; + tcpm_ams_finish(port); + mod_vdm_delayed_work(port, 0); + } + + switch (type) { + case PD_CTRL_GOOD_CRC: + case PD_CTRL_PING: + break; + case PD_CTRL_GET_SOURCE_CAP: + tcpm_pd_handle_msg(port, PD_MSG_DATA_SOURCE_CAP, GET_SOURCE_CAPABILITIES); + break; + case PD_CTRL_GET_SINK_CAP: + tcpm_pd_handle_msg(port, PD_MSG_DATA_SINK_CAP, GET_SINK_CAPABILITIES); + break; + case PD_CTRL_GOTO_MIN: + break; + case PD_CTRL_PS_RDY: + switch (port->state) { + case SNK_TRANSITION_SINK: + if (port->vbus_present) { + tcpm_set_current_limit(port, + port->req_current_limit, + port->req_supply_voltage); + port->explicit_contract = true; + tcpm_set_auto_vbus_discharge_threshold(port, + TYPEC_PWR_MODE_PD, + port->pps_data.active, + port->supply_voltage); + tcpm_set_state(port, SNK_READY, 0); + } else { + /* + * Seen after power swap. Keep waiting for VBUS + * in a transitional state. + */ + tcpm_set_state(port, + SNK_TRANSITION_SINK_VBUS, 0); + } + break; + case PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED: + tcpm_set_state(port, PR_SWAP_SRC_SNK_SINK_ON, 0); + break; + case PR_SWAP_SNK_SRC_SINK_OFF: + tcpm_set_state(port, PR_SWAP_SNK_SRC_SOURCE_ON, 0); + break; + case VCONN_SWAP_WAIT_FOR_VCONN: + tcpm_set_state(port, VCONN_SWAP_TURN_OFF_VCONN, 0); + break; + case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF: + tcpm_set_state(port, FR_SWAP_SNK_SRC_NEW_SINK_READY, 0); + break; + default: + tcpm_pd_handle_state(port, + port->pwr_role == TYPEC_SOURCE ? + SRC_SOFT_RESET_WAIT_SNK_TX : + SNK_SOFT_RESET, + NONE_AMS, 0); + break; + } + break; + case PD_CTRL_REJECT: + case PD_CTRL_WAIT: + case PD_CTRL_NOT_SUPP: + switch (port->state) { + case SNK_NEGOTIATE_CAPABILITIES: + /* USB PD specification, Figure 8-43 */ + if (port->explicit_contract) + next_state = SNK_READY; + else + next_state = SNK_WAIT_CAPABILITIES; + + /* Threshold was relaxed before sending Request. Restore it back. */ + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD, + port->pps_data.active, + port->supply_voltage); + tcpm_set_state(port, next_state, 0); + break; + case SNK_NEGOTIATE_PPS_CAPABILITIES: + /* Revert data back from any requested PPS updates */ + port->pps_data.req_out_volt = port->supply_voltage; + port->pps_data.req_op_curr = port->current_limit; + port->pps_status = (type == PD_CTRL_WAIT ? + -EAGAIN : -EOPNOTSUPP); + + /* Threshold was relaxed before sending Request. Restore it back. */ + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD, + port->pps_data.active, + port->supply_voltage); + + tcpm_set_state(port, SNK_READY, 0); + break; + case DR_SWAP_SEND: + port->swap_status = (type == PD_CTRL_WAIT ? + -EAGAIN : -EOPNOTSUPP); + tcpm_set_state(port, DR_SWAP_CANCEL, 0); + break; + case PR_SWAP_SEND: + port->swap_status = (type == PD_CTRL_WAIT ? + -EAGAIN : -EOPNOTSUPP); + tcpm_set_state(port, PR_SWAP_CANCEL, 0); + break; + case VCONN_SWAP_SEND: + port->swap_status = (type == PD_CTRL_WAIT ? + -EAGAIN : -EOPNOTSUPP); + tcpm_set_state(port, VCONN_SWAP_CANCEL, 0); + break; + case FR_SWAP_SEND: + tcpm_set_state(port, FR_SWAP_CANCEL, 0); + break; + case GET_SINK_CAP: + port->sink_cap_done = true; + tcpm_set_state(port, ready_state(port), 0); + break; + /* + * Some port partners do not support GET_STATUS, avoid soft reset the link to + * prevent redundant power re-negotiation + */ + case GET_STATUS_SEND: + tcpm_set_state(port, ready_state(port), 0); + break; + case SRC_READY: + case SNK_READY: + if (port->vdm_state > VDM_STATE_READY) { + port->vdm_state = VDM_STATE_DONE; + if (tcpm_vdm_ams(port)) + tcpm_ams_finish(port); + mod_vdm_delayed_work(port, 0); + break; + } + fallthrough; + default: + tcpm_pd_handle_state(port, + port->pwr_role == TYPEC_SOURCE ? + SRC_SOFT_RESET_WAIT_SNK_TX : + SNK_SOFT_RESET, + NONE_AMS, 0); + break; + } + break; + case PD_CTRL_ACCEPT: + switch (port->state) { + case SNK_NEGOTIATE_CAPABILITIES: + port->pps_data.active = false; + tcpm_set_state(port, SNK_TRANSITION_SINK, 0); + break; + case SNK_NEGOTIATE_PPS_CAPABILITIES: + port->pps_data.active = true; + port->pps_data.min_volt = port->pps_data.req_min_volt; + port->pps_data.max_volt = port->pps_data.req_max_volt; + port->pps_data.max_curr = port->pps_data.req_max_curr; + port->req_supply_voltage = port->pps_data.req_out_volt; + port->req_current_limit = port->pps_data.req_op_curr; + power_supply_changed(port->psy); + tcpm_set_state(port, SNK_TRANSITION_SINK, 0); + break; + case SOFT_RESET_SEND: + if (port->ams == SOFT_RESET_AMS) + tcpm_ams_finish(port); + if (port->pwr_role == TYPEC_SOURCE) { + port->upcoming_state = SRC_SEND_CAPABILITIES; + tcpm_ams_start(port, POWER_NEGOTIATION); + } else { + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); + } + break; + case DR_SWAP_SEND: + tcpm_set_state(port, DR_SWAP_CHANGE_DR, 0); + break; + case PR_SWAP_SEND: + tcpm_set_state(port, PR_SWAP_START, 0); + break; + case VCONN_SWAP_SEND: + tcpm_set_state(port, VCONN_SWAP_START, 0); + break; + case FR_SWAP_SEND: + tcpm_set_state(port, FR_SWAP_SNK_SRC_TRANSITION_TO_OFF, 0); + break; + default: + tcpm_pd_handle_state(port, + port->pwr_role == TYPEC_SOURCE ? + SRC_SOFT_RESET_WAIT_SNK_TX : + SNK_SOFT_RESET, + NONE_AMS, 0); + break; + } + break; + case PD_CTRL_SOFT_RESET: + port->ams = SOFT_RESET_AMS; + tcpm_set_state(port, SOFT_RESET, 0); + break; + case PD_CTRL_DR_SWAP: + /* + * XXX + * 6.3.9: If an alternate mode is active, a request to swap + * alternate modes shall trigger a port reset. + */ + if (port->typec_caps.data != TYPEC_PORT_DRD) { + tcpm_pd_handle_msg(port, + port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + } else { + if (port->send_discover) { + tcpm_queue_message(port, PD_MSG_CTRL_WAIT); + break; + } + + tcpm_pd_handle_state(port, DR_SWAP_ACCEPT, DATA_ROLE_SWAP, 0); + } + break; + case PD_CTRL_PR_SWAP: + if (port->port_type != TYPEC_PORT_DRP) { + tcpm_pd_handle_msg(port, + port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + } else { + if (port->send_discover) { + tcpm_queue_message(port, PD_MSG_CTRL_WAIT); + break; + } + + tcpm_pd_handle_state(port, PR_SWAP_ACCEPT, POWER_ROLE_SWAP, 0); + } + break; + case PD_CTRL_VCONN_SWAP: + if (port->send_discover) { + tcpm_queue_message(port, PD_MSG_CTRL_WAIT); + break; + } + + tcpm_pd_handle_state(port, VCONN_SWAP_ACCEPT, VCONN_SWAP, 0); + break; + case PD_CTRL_GET_SOURCE_CAP_EXT: + case PD_CTRL_GET_STATUS: + case PD_CTRL_FR_SWAP: + case PD_CTRL_GET_PPS_STATUS: + case PD_CTRL_GET_COUNTRY_CODES: + /* Currently not supported */ + tcpm_pd_handle_msg(port, + port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + break; + default: + tcpm_pd_handle_msg(port, + port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + tcpm_log(port, "Unrecognized ctrl message type %#x", type); + break; + } +} + +static void tcpm_pd_ext_msg_request(struct tcpm_port *port, + const struct pd_message *msg) +{ + enum pd_ext_msg_type type = pd_header_type_le(msg->header); + unsigned int data_size = pd_ext_header_data_size_le(msg->ext_msg.header); + + /* stopping VDM state machine if interrupted by other Messages */ + if (tcpm_vdm_ams(port)) { + port->vdm_state = VDM_STATE_ERR_BUSY; + tcpm_ams_finish(port); + mod_vdm_delayed_work(port, 0); + } + + if (!(le16_to_cpu(msg->ext_msg.header) & PD_EXT_HDR_CHUNKED)) { + tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS); + tcpm_log(port, "Unchunked extended messages unsupported"); + return; + } + + if (data_size > PD_EXT_MAX_CHUNK_DATA) { + tcpm_pd_handle_state(port, CHUNK_NOT_SUPP, NONE_AMS, PD_T_CHUNK_NOT_SUPP); + tcpm_log(port, "Chunk handling not yet supported"); + return; + } + + switch (type) { + case PD_EXT_STATUS: + case PD_EXT_PPS_STATUS: + if (port->ams == GETTING_SOURCE_SINK_STATUS) { + tcpm_ams_finish(port); + tcpm_set_state(port, ready_state(port), 0); + } else { + /* unexpected Status or PPS_Status Message */ + tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ? + SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET, + NONE_AMS, 0); + } + break; + case PD_EXT_SOURCE_CAP_EXT: + case PD_EXT_GET_BATT_CAP: + case PD_EXT_GET_BATT_STATUS: + case PD_EXT_BATT_CAP: + case PD_EXT_GET_MANUFACTURER_INFO: + case PD_EXT_MANUFACTURER_INFO: + case PD_EXT_SECURITY_REQUEST: + case PD_EXT_SECURITY_RESPONSE: + case PD_EXT_FW_UPDATE_REQUEST: + case PD_EXT_FW_UPDATE_RESPONSE: + case PD_EXT_COUNTRY_INFO: + case PD_EXT_COUNTRY_CODES: + tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS); + break; + default: + tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS); + tcpm_log(port, "Unrecognized extended message type %#x", type); + break; + } +} + +static void tcpm_pd_rx_handler(struct kthread_work *work) +{ + struct pd_rx_event *event = container_of(work, + struct pd_rx_event, work); + const struct pd_message *msg = &event->msg; + unsigned int cnt = pd_header_cnt_le(msg->header); + struct tcpm_port *port = event->port; + + mutex_lock(&port->lock); + + tcpm_log(port, "PD RX, header: %#x [%d]", le16_to_cpu(msg->header), + port->attached); + + if (port->attached) { + enum pd_ctrl_msg_type type = pd_header_type_le(msg->header); + unsigned int msgid = pd_header_msgid_le(msg->header); + + /* + * USB PD standard, 6.6.1.2: + * "... if MessageID value in a received Message is the + * same as the stored value, the receiver shall return a + * GoodCRC Message with that MessageID value and drop + * the Message (this is a retry of an already received + * Message). Note: this shall not apply to the Soft_Reset + * Message which always has a MessageID value of zero." + */ + if (msgid == port->rx_msgid && type != PD_CTRL_SOFT_RESET) + goto done; + port->rx_msgid = msgid; + + /* + * If both ends believe to be DFP/host, we have a data role + * mismatch. + */ + if (!!(le16_to_cpu(msg->header) & PD_HEADER_DATA_ROLE) == + (port->data_role == TYPEC_HOST)) { + tcpm_log(port, + "Data role mismatch, initiating error recovery"); + tcpm_set_state(port, ERROR_RECOVERY, 0); + } else { + if (le16_to_cpu(msg->header) & PD_HEADER_EXT_HDR) + tcpm_pd_ext_msg_request(port, msg); + else if (cnt) + tcpm_pd_data_request(port, msg); + else + tcpm_pd_ctrl_request(port, msg); + } + } + +done: + mutex_unlock(&port->lock); + kfree(event); +} + +void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg) +{ + struct pd_rx_event *event; + + event = kzalloc(sizeof(*event), GFP_ATOMIC); + if (!event) + return; + + kthread_init_work(&event->work, tcpm_pd_rx_handler); + event->port = port; + memcpy(&event->msg, msg, sizeof(*msg)); + kthread_queue_work(port->wq, &event->work); +} +EXPORT_SYMBOL_GPL(tcpm_pd_receive); + +static int tcpm_pd_send_control(struct tcpm_port *port, + enum pd_ctrl_msg_type type) +{ + struct pd_message msg; + + memset(&msg, 0, sizeof(msg)); + msg.header = PD_HEADER_LE(type, port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, 0); + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +/* + * Send queued message without affecting state. + * Return true if state machine should go back to sleep, + * false otherwise. + */ +static bool tcpm_send_queued_message(struct tcpm_port *port) +{ + enum pd_msg_request queued_message; + int ret; + + do { + queued_message = port->queued_message; + port->queued_message = PD_MSG_NONE; + + switch (queued_message) { + case PD_MSG_CTRL_WAIT: + tcpm_pd_send_control(port, PD_CTRL_WAIT); + break; + case PD_MSG_CTRL_REJECT: + tcpm_pd_send_control(port, PD_CTRL_REJECT); + break; + case PD_MSG_CTRL_NOT_SUPP: + tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP); + break; + case PD_MSG_DATA_SINK_CAP: + ret = tcpm_pd_send_sink_caps(port); + if (ret < 0) { + tcpm_log(port, "Unable to send snk caps, ret=%d", ret); + tcpm_set_state(port, SNK_SOFT_RESET, 0); + } + tcpm_ams_finish(port); + break; + case PD_MSG_DATA_SOURCE_CAP: + ret = tcpm_pd_send_source_caps(port); + if (ret < 0) { + tcpm_log(port, + "Unable to send src caps, ret=%d", + ret); + tcpm_set_state(port, SOFT_RESET_SEND, 0); + } else if (port->pwr_role == TYPEC_SOURCE) { + tcpm_ams_finish(port); + tcpm_set_state(port, HARD_RESET_SEND, + PD_T_SENDER_RESPONSE); + } else { + tcpm_ams_finish(port); + } + break; + default: + break; + } + } while (port->queued_message != PD_MSG_NONE); + + if (port->delayed_state != INVALID_STATE) { + if (ktime_after(port->delayed_runtime, ktime_get())) { + mod_tcpm_delayed_work(port, ktime_to_ms(ktime_sub(port->delayed_runtime, + ktime_get()))); + return true; + } + port->delayed_state = INVALID_STATE; + } + return false; +} + +static int tcpm_pd_check_request(struct tcpm_port *port) +{ + u32 pdo, rdo = port->sink_request; + unsigned int max, op, pdo_max, index; + enum pd_pdo_type type; + + index = rdo_index(rdo); + if (!index || index > port->nr_src_pdo) + return -EINVAL; + + pdo = port->src_pdo[index - 1]; + type = pdo_type(pdo); + switch (type) { + case PDO_TYPE_FIXED: + case PDO_TYPE_VAR: + max = rdo_max_current(rdo); + op = rdo_op_current(rdo); + pdo_max = pdo_max_current(pdo); + + if (op > pdo_max) + return -EINVAL; + if (max > pdo_max && !(rdo & RDO_CAP_MISMATCH)) + return -EINVAL; + + if (type == PDO_TYPE_FIXED) + tcpm_log(port, + "Requested %u mV, %u mA for %u / %u mA", + pdo_fixed_voltage(pdo), pdo_max, op, max); + else + tcpm_log(port, + "Requested %u -> %u mV, %u mA for %u / %u mA", + pdo_min_voltage(pdo), pdo_max_voltage(pdo), + pdo_max, op, max); + break; + case PDO_TYPE_BATT: + max = rdo_max_power(rdo); + op = rdo_op_power(rdo); + pdo_max = pdo_max_power(pdo); + + if (op > pdo_max) + return -EINVAL; + if (max > pdo_max && !(rdo & RDO_CAP_MISMATCH)) + return -EINVAL; + tcpm_log(port, + "Requested %u -> %u mV, %u mW for %u / %u mW", + pdo_min_voltage(pdo), pdo_max_voltage(pdo), + pdo_max, op, max); + break; + default: + return -EINVAL; + } + + port->op_vsafe5v = index == 1; + + return 0; +} + +#define min_power(x, y) min(pdo_max_power(x), pdo_max_power(y)) +#define min_current(x, y) min(pdo_max_current(x), pdo_max_current(y)) + +static int tcpm_pd_select_pdo(struct tcpm_port *port, int *sink_pdo, + int *src_pdo) +{ + unsigned int i, j, max_src_mv = 0, min_src_mv = 0, max_mw = 0, + max_mv = 0, src_mw = 0, src_ma = 0, max_snk_mv = 0, + min_snk_mv = 0; + int ret = -EINVAL; + + port->pps_data.supported = false; + port->usb_type = POWER_SUPPLY_USB_TYPE_PD; + power_supply_changed(port->psy); + + /* + * Select the source PDO providing the most power which has a + * matchig sink cap. + */ + for (i = 0; i < port->nr_source_caps; i++) { + u32 pdo = port->source_caps[i]; + enum pd_pdo_type type = pdo_type(pdo); + + switch (type) { + case PDO_TYPE_FIXED: + max_src_mv = pdo_fixed_voltage(pdo); + min_src_mv = max_src_mv; + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: + max_src_mv = pdo_max_voltage(pdo); + min_src_mv = pdo_min_voltage(pdo); + break; + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) == APDO_TYPE_PPS) { + port->pps_data.supported = true; + port->usb_type = + POWER_SUPPLY_USB_TYPE_PD_PPS; + power_supply_changed(port->psy); + } + continue; + default: + tcpm_log(port, "Invalid source PDO type, ignoring"); + continue; + } + + switch (type) { + case PDO_TYPE_FIXED: + case PDO_TYPE_VAR: + src_ma = pdo_max_current(pdo); + src_mw = src_ma * min_src_mv / 1000; + break; + case PDO_TYPE_BATT: + src_mw = pdo_max_power(pdo); + break; + case PDO_TYPE_APDO: + continue; + default: + tcpm_log(port, "Invalid source PDO type, ignoring"); + continue; + } + + for (j = 0; j < port->nr_snk_pdo; j++) { + pdo = port->snk_pdo[j]; + + switch (pdo_type(pdo)) { + case PDO_TYPE_FIXED: + max_snk_mv = pdo_fixed_voltage(pdo); + min_snk_mv = max_snk_mv; + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: + max_snk_mv = pdo_max_voltage(pdo); + min_snk_mv = pdo_min_voltage(pdo); + break; + case PDO_TYPE_APDO: + continue; + default: + tcpm_log(port, "Invalid sink PDO type, ignoring"); + continue; + } + + if (max_src_mv <= max_snk_mv && + min_src_mv >= min_snk_mv) { + /* Prefer higher voltages if available */ + if ((src_mw == max_mw && min_src_mv > max_mv) || + src_mw > max_mw) { + *src_pdo = i; + *sink_pdo = j; + max_mw = src_mw; + max_mv = min_src_mv; + ret = 0; + } + } + } + } + + return ret; +} + +static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) +{ + unsigned int i, src_ma, max_temp_mw = 0, max_op_ma, op_mw; + unsigned int src_pdo = 0; + u32 pdo, src; + + for (i = 1; i < port->nr_source_caps; ++i) { + pdo = port->source_caps[i]; + + switch (pdo_type(pdo)) { + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) { + tcpm_log(port, "Not PPS APDO (source), ignoring"); + continue; + } + + if (port->pps_data.req_out_volt > pdo_pps_apdo_max_voltage(pdo) || + port->pps_data.req_out_volt < pdo_pps_apdo_min_voltage(pdo)) + continue; + + src_ma = pdo_pps_apdo_max_current(pdo); + max_op_ma = min(src_ma, port->pps_data.req_op_curr); + op_mw = max_op_ma * port->pps_data.req_out_volt / 1000; + if (op_mw > max_temp_mw) { + src_pdo = i; + max_temp_mw = op_mw; + } + break; + default: + tcpm_log(port, "Not APDO type (source), ignoring"); + continue; + } + } + + if (src_pdo) { + src = port->source_caps[src_pdo]; + + port->pps_data.req_min_volt = pdo_pps_apdo_min_voltage(src); + port->pps_data.req_max_volt = pdo_pps_apdo_max_voltage(src); + port->pps_data.req_max_curr = pdo_pps_apdo_max_current(src); + port->pps_data.req_op_curr = min(port->pps_data.req_max_curr, + port->pps_data.req_op_curr); + } + + return src_pdo; +} + +static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo) +{ + unsigned int mv, ma, mw, flags; + unsigned int max_ma, max_mw; + enum pd_pdo_type type; + u32 pdo, matching_snk_pdo; + int src_pdo_index = 0; + int snk_pdo_index = 0; + int ret; + + ret = tcpm_pd_select_pdo(port, &snk_pdo_index, &src_pdo_index); + if (ret < 0) + return ret; + + pdo = port->source_caps[src_pdo_index]; + matching_snk_pdo = port->snk_pdo[snk_pdo_index]; + type = pdo_type(pdo); + + switch (type) { + case PDO_TYPE_FIXED: + mv = pdo_fixed_voltage(pdo); + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: + mv = pdo_min_voltage(pdo); + break; + default: + tcpm_log(port, "Invalid PDO selected!"); + return -EINVAL; + } + + /* Select maximum available current within the sink pdo's limit */ + if (type == PDO_TYPE_BATT) { + mw = min_power(pdo, matching_snk_pdo); + ma = 1000 * mw / mv; + } else { + ma = min_current(pdo, matching_snk_pdo); + mw = ma * mv / 1000; + } + + flags = RDO_USB_COMM | RDO_NO_SUSPEND; + + /* Set mismatch bit if offered power is less than operating power */ + max_ma = ma; + max_mw = mw; + if (mw < port->operating_snk_mw) { + flags |= RDO_CAP_MISMATCH; + if (type == PDO_TYPE_BATT && + (pdo_max_power(matching_snk_pdo) > pdo_max_power(pdo))) + max_mw = pdo_max_power(matching_snk_pdo); + else if (pdo_max_current(matching_snk_pdo) > + pdo_max_current(pdo)) + max_ma = pdo_max_current(matching_snk_pdo); + } + + tcpm_log(port, "cc=%d cc1=%d cc2=%d vbus=%d vconn=%s polarity=%d", + port->cc_req, port->cc1, port->cc2, port->vbus_source, + port->vconn_role == TYPEC_SOURCE ? "source" : "sink", + port->polarity); + + if (type == PDO_TYPE_BATT) { + *rdo = RDO_BATT(src_pdo_index + 1, mw, max_mw, flags); + + tcpm_log(port, "Requesting PDO %d: %u mV, %u mW%s", + src_pdo_index, mv, mw, + flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); + } else { + *rdo = RDO_FIXED(src_pdo_index + 1, ma, max_ma, flags); + + tcpm_log(port, "Requesting PDO %d: %u mV, %u mA%s", + src_pdo_index, mv, ma, + flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); + } + + port->req_current_limit = ma; + port->req_supply_voltage = mv; + + return 0; +} + +static int tcpm_pd_send_request(struct tcpm_port *port) +{ + struct pd_message msg; + int ret; + u32 rdo; + + ret = tcpm_pd_build_request(port, &rdo); + if (ret < 0) + return ret; + + /* + * Relax the threshold as voltage will be adjusted after Accept Message plus tSrcTransition. + * It is safer to modify the threshold here. + */ + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0); + + memset(&msg, 0, sizeof(msg)); + msg.header = PD_HEADER_LE(PD_DATA_REQUEST, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, 1); + msg.payload[0] = cpu_to_le32(rdo); + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo) +{ + unsigned int out_mv, op_ma, op_mw, max_mv, max_ma, flags; + unsigned int src_pdo_index; + + src_pdo_index = tcpm_pd_select_pps_apdo(port); + if (!src_pdo_index) + return -EOPNOTSUPP; + + max_mv = port->pps_data.req_max_volt; + max_ma = port->pps_data.req_max_curr; + out_mv = port->pps_data.req_out_volt; + op_ma = port->pps_data.req_op_curr; + + flags = RDO_USB_COMM | RDO_NO_SUSPEND; + + op_mw = (op_ma * out_mv) / 1000; + if (op_mw < port->operating_snk_mw) { + /* + * Try raising current to meet power needs. If that's not enough + * then try upping the voltage. If that's still not enough + * then we've obviously chosen a PPS APDO which really isn't + * suitable so abandon ship. + */ + op_ma = (port->operating_snk_mw * 1000) / out_mv; + if ((port->operating_snk_mw * 1000) % out_mv) + ++op_ma; + op_ma += RDO_PROG_CURR_MA_STEP - (op_ma % RDO_PROG_CURR_MA_STEP); + + if (op_ma > max_ma) { + op_ma = max_ma; + out_mv = (port->operating_snk_mw * 1000) / op_ma; + if ((port->operating_snk_mw * 1000) % op_ma) + ++out_mv; + out_mv += RDO_PROG_VOLT_MV_STEP - + (out_mv % RDO_PROG_VOLT_MV_STEP); + + if (out_mv > max_mv) { + tcpm_log(port, "Invalid PPS APDO selected!"); + return -EINVAL; + } + } + } + + tcpm_log(port, "cc=%d cc1=%d cc2=%d vbus=%d vconn=%s polarity=%d", + port->cc_req, port->cc1, port->cc2, port->vbus_source, + port->vconn_role == TYPEC_SOURCE ? "source" : "sink", + port->polarity); + + *rdo = RDO_PROG(src_pdo_index + 1, out_mv, op_ma, flags); + + tcpm_log(port, "Requesting APDO %d: %u mV, %u mA", + src_pdo_index, out_mv, op_ma); + + port->pps_data.req_op_curr = op_ma; + port->pps_data.req_out_volt = out_mv; + + return 0; +} + +static int tcpm_pd_send_pps_request(struct tcpm_port *port) +{ + struct pd_message msg; + int ret; + u32 rdo; + + ret = tcpm_pd_build_pps_request(port, &rdo); + if (ret < 0) + return ret; + + /* Relax the threshold as voltage will be adjusted right after Accept Message. */ + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0); + + memset(&msg, 0, sizeof(msg)); + msg.header = PD_HEADER_LE(PD_DATA_REQUEST, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, 1); + msg.payload[0] = cpu_to_le32(rdo); + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +static int tcpm_set_vbus(struct tcpm_port *port, bool enable) +{ + int ret; + + if (enable && port->vbus_charge) + return -EINVAL; + + tcpm_log(port, "vbus:=%d charge=%d", enable, port->vbus_charge); + + ret = port->tcpc->set_vbus(port->tcpc, enable, port->vbus_charge); + if (ret < 0) + return ret; + + port->vbus_source = enable; + return 0; +} + +static int tcpm_set_charge(struct tcpm_port *port, bool charge) +{ + int ret; + + if (charge && port->vbus_source) + return -EINVAL; + + if (charge != port->vbus_charge) { + tcpm_log(port, "vbus=%d charge:=%d", port->vbus_source, charge); + ret = port->tcpc->set_vbus(port->tcpc, port->vbus_source, + charge); + if (ret < 0) + return ret; + } + port->vbus_charge = charge; + power_supply_changed(port->psy); + return 0; +} + +static bool tcpm_start_toggling(struct tcpm_port *port, enum typec_cc_status cc) +{ + int ret; + + if (!port->tcpc->start_toggling) + return false; + + tcpm_log_force(port, "Start toggling"); + ret = port->tcpc->start_toggling(port->tcpc, port->port_type, cc); + return ret == 0; +} + +static int tcpm_init_vbus(struct tcpm_port *port) +{ + int ret; + + ret = port->tcpc->set_vbus(port->tcpc, false, false); + port->vbus_source = false; + port->vbus_charge = false; + return ret; +} + +static int tcpm_init_vconn(struct tcpm_port *port) +{ + int ret; + + ret = port->tcpc->set_vconn(port->tcpc, false); + port->vconn_role = TYPEC_SINK; + return ret; +} + +static void tcpm_typec_connect(struct tcpm_port *port) +{ + if (!port->connected) { + /* Make sure we don't report stale identity information */ + memset(&port->partner_ident, 0, sizeof(port->partner_ident)); + port->partner_desc.usb_pd = port->pd_capable; + if (tcpm_port_is_debug(port)) + port->partner_desc.accessory = TYPEC_ACCESSORY_DEBUG; + else if (tcpm_port_is_audio(port)) + port->partner_desc.accessory = TYPEC_ACCESSORY_AUDIO; + else + port->partner_desc.accessory = TYPEC_ACCESSORY_NONE; + port->partner = typec_register_partner(port->typec_port, + &port->partner_desc); + port->connected = true; + typec_partner_set_usb_power_delivery(port->partner, port->partner_pd); + } +} + +static int tcpm_src_attach(struct tcpm_port *port) +{ + enum typec_cc_polarity polarity = + port->cc2 == TYPEC_CC_RD ? TYPEC_POLARITY_CC2 + : TYPEC_POLARITY_CC1; + int ret; + + if (port->attached) + return 0; + + ret = tcpm_set_polarity(port, polarity); + if (ret < 0) + return ret; + + tcpm_enable_auto_vbus_discharge(port, true); + + ret = tcpm_set_roles(port, true, TYPEC_SOURCE, tcpm_data_role_for_source(port)); + if (ret < 0) + return ret; + + if (port->pd_supported) { + ret = port->tcpc->set_pd_rx(port->tcpc, true); + if (ret < 0) + goto out_disable_mux; + } + + /* + * USB Type-C specification, version 1.2, + * chapter 4.5.2.2.8.1 (Attached.SRC Requirements) + * Enable VCONN only if the non-RD port is set to RA. + */ + if ((polarity == TYPEC_POLARITY_CC1 && port->cc2 == TYPEC_CC_RA) || + (polarity == TYPEC_POLARITY_CC2 && port->cc1 == TYPEC_CC_RA)) { + ret = tcpm_set_vconn(port, true); + if (ret < 0) + goto out_disable_pd; + } + + ret = tcpm_set_vbus(port, true); + if (ret < 0) + goto out_disable_vconn; + + port->pd_capable = false; + + port->partner = NULL; + + port->attached = true; + port->send_discover = true; + + return 0; + +out_disable_vconn: + tcpm_set_vconn(port, false); +out_disable_pd: + if (port->pd_supported) + port->tcpc->set_pd_rx(port->tcpc, false); +out_disable_mux: + tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE, + TYPEC_ORIENTATION_NONE); + return ret; +} + +static void tcpm_typec_disconnect(struct tcpm_port *port) +{ + if (port->connected) { + typec_partner_set_usb_power_delivery(port->partner, NULL); + typec_unregister_partner(port->partner); + port->partner = NULL; + port->connected = false; + } +} + +static void tcpm_unregister_altmodes(struct tcpm_port *port) +{ + struct pd_mode_data *modep = &port->mode_data; + int i; + + for (i = 0; i < modep->altmodes; i++) { + typec_unregister_altmode(port->partner_altmode[i]); + port->partner_altmode[i] = NULL; + } + + memset(modep, 0, sizeof(*modep)); +} + +static void tcpm_set_partner_usb_comm_capable(struct tcpm_port *port, bool capable) +{ + tcpm_log(port, "Setting usb_comm capable %s", capable ? "true" : "false"); + + if (port->tcpc->set_partner_usb_comm_capable) + port->tcpc->set_partner_usb_comm_capable(port->tcpc, capable); +} + +static void tcpm_reset_port(struct tcpm_port *port) +{ + tcpm_enable_auto_vbus_discharge(port, false); + port->in_ams = false; + port->ams = NONE_AMS; + port->vdm_sm_running = false; + tcpm_unregister_altmodes(port); + tcpm_typec_disconnect(port); + port->attached = false; + port->pd_capable = false; + port->pps_data.supported = false; + tcpm_set_partner_usb_comm_capable(port, false); + + /* + * First Rx ID should be 0; set this to a sentinel of -1 so that + * we can check tcpm_pd_rx_handler() if we had seen it before. + */ + port->rx_msgid = -1; + + port->tcpc->set_pd_rx(port->tcpc, false); + tcpm_init_vbus(port); /* also disables charging */ + tcpm_init_vconn(port); + tcpm_set_current_limit(port, 0, 0); + tcpm_set_polarity(port, TYPEC_POLARITY_CC1); + tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE, + TYPEC_ORIENTATION_NONE); + tcpm_set_attached_state(port, false); + port->try_src_count = 0; + port->try_snk_count = 0; + port->usb_type = POWER_SUPPLY_USB_TYPE_C; + power_supply_changed(port->psy); + port->nr_sink_caps = 0; + port->sink_cap_done = false; + if (port->tcpc->enable_frs) + port->tcpc->enable_frs(port->tcpc, false); + + usb_power_delivery_unregister_capabilities(port->partner_sink_caps); + port->partner_sink_caps = NULL; + usb_power_delivery_unregister_capabilities(port->partner_source_caps); + port->partner_source_caps = NULL; + usb_power_delivery_unregister(port->partner_pd); + port->partner_pd = NULL; +} + +static void tcpm_detach(struct tcpm_port *port) +{ + if (tcpm_port_is_disconnected(port)) + port->hard_reset_count = 0; + + port->try_src_count = 0; + port->try_snk_count = 0; + + if (!port->attached) + return; + + if (port->tcpc->set_bist_data) { + tcpm_log(port, "disable BIST MODE TESTDATA"); + port->tcpc->set_bist_data(port->tcpc, false); + } + + tcpm_reset_port(port); +} + +static void tcpm_src_detach(struct tcpm_port *port) +{ + tcpm_detach(port); +} + +static int tcpm_snk_attach(struct tcpm_port *port) +{ + int ret; + + if (port->attached) + return 0; + + ret = tcpm_set_polarity(port, port->cc2 != TYPEC_CC_OPEN ? + TYPEC_POLARITY_CC2 : TYPEC_POLARITY_CC1); + if (ret < 0) + return ret; + + tcpm_enable_auto_vbus_discharge(port, true); + + ret = tcpm_set_roles(port, true, TYPEC_SINK, tcpm_data_role_for_sink(port)); + if (ret < 0) + return ret; + + port->pd_capable = false; + + port->partner = NULL; + + port->attached = true; + port->send_discover = true; + + return 0; +} + +static void tcpm_snk_detach(struct tcpm_port *port) +{ + tcpm_detach(port); +} + +static int tcpm_acc_attach(struct tcpm_port *port) +{ + int ret; + + if (port->attached) + return 0; + + ret = tcpm_set_roles(port, true, TYPEC_SOURCE, + tcpm_data_role_for_source(port)); + if (ret < 0) + return ret; + + port->partner = NULL; + + tcpm_typec_connect(port); + + port->attached = true; + + return 0; +} + +static void tcpm_acc_detach(struct tcpm_port *port) +{ + tcpm_detach(port); +} + +static inline enum tcpm_state hard_reset_state(struct tcpm_port *port) +{ + if (port->hard_reset_count < PD_N_HARD_RESET_COUNT) + return HARD_RESET_SEND; + if (port->pd_capable) + return ERROR_RECOVERY; + if (port->pwr_role == TYPEC_SOURCE) + return SRC_UNATTACHED; + if (port->state == SNK_WAIT_CAPABILITIES) + return SNK_READY; + return SNK_UNATTACHED; +} + +static inline enum tcpm_state unattached_state(struct tcpm_port *port) +{ + if (port->port_type == TYPEC_PORT_DRP) { + if (port->pwr_role == TYPEC_SOURCE) + return SRC_UNATTACHED; + else + return SNK_UNATTACHED; + } else if (port->port_type == TYPEC_PORT_SRC) { + return SRC_UNATTACHED; + } + + return SNK_UNATTACHED; +} + +static void tcpm_swap_complete(struct tcpm_port *port, int result) +{ + if (port->swap_pending) { + port->swap_status = result; + port->swap_pending = false; + port->non_pd_role_swap = false; + complete(&port->swap_complete); + } +} + +static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc) +{ + switch (cc) { + case TYPEC_CC_RP_1_5: + return TYPEC_PWR_MODE_1_5A; + case TYPEC_CC_RP_3_0: + return TYPEC_PWR_MODE_3_0A; + case TYPEC_CC_RP_DEF: + default: + return TYPEC_PWR_MODE_USB; + } +} + +static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode) +{ + switch (opmode) { + case TYPEC_PWR_MODE_USB: + return TYPEC_CC_RP_DEF; + case TYPEC_PWR_MODE_1_5A: + return TYPEC_CC_RP_1_5; + case TYPEC_PWR_MODE_3_0A: + case TYPEC_PWR_MODE_PD: + default: + return TYPEC_CC_RP_3_0; + } +} + +static void tcpm_set_initial_svdm_version(struct tcpm_port *port) +{ + switch (port->negotiated_rev) { + case PD_REV30: + break; + /* + * 6.4.4.2.3 Structured VDM Version + * 2.0 states "At this time, there is only one version (1.0) defined. + * This field Shall be set to zero to indicate Version 1.0." + * 3.0 states "This field Shall be set to 01b to indicate Version 2.0." + * To ensure that we follow the Power Delivery revision we are currently + * operating on, downgrade the SVDM version to the highest one supported + * by the Power Delivery revision. + */ + case PD_REV20: + typec_partner_set_svdm_version(port->partner, SVDM_VER_1_0); + break; + default: + typec_partner_set_svdm_version(port->partner, SVDM_VER_1_0); + break; + } +} + +static void run_state_machine(struct tcpm_port *port) +{ + int ret; + enum typec_pwr_opmode opmode; + unsigned int msecs; + enum tcpm_state upcoming_state; + + if (port->tcpc->check_contaminant && port->state != CHECK_CONTAMINANT) + port->potential_contaminant = ((port->enter_state == SRC_ATTACH_WAIT && + port->state == SRC_UNATTACHED) || + (port->enter_state == SNK_ATTACH_WAIT && + port->state == SNK_UNATTACHED) || + (port->enter_state == SNK_DEBOUNCED && + port->state == SNK_UNATTACHED)); + + port->enter_state = port->state; + switch (port->state) { + case TOGGLING: + break; + case CHECK_CONTAMINANT: + port->tcpc->check_contaminant(port->tcpc); + break; + /* SRC states */ + case SRC_UNATTACHED: + if (!port->non_pd_role_swap) + tcpm_swap_complete(port, -ENOTCONN); + tcpm_src_detach(port); + if (port->potential_contaminant) { + tcpm_set_state(port, CHECK_CONTAMINANT, 0); + break; + } + if (tcpm_start_toggling(port, tcpm_rp_cc(port))) { + tcpm_set_state(port, TOGGLING, 0); + break; + } + tcpm_set_cc(port, tcpm_rp_cc(port)); + if (port->port_type == TYPEC_PORT_DRP) + tcpm_set_state(port, SNK_UNATTACHED, PD_T_DRP_SNK); + break; + case SRC_ATTACH_WAIT: + if (tcpm_port_is_debug(port)) + tcpm_set_state(port, DEBUG_ACC_ATTACHED, + PD_T_CC_DEBOUNCE); + else if (tcpm_port_is_audio(port)) + tcpm_set_state(port, AUDIO_ACC_ATTACHED, + PD_T_CC_DEBOUNCE); + else if (tcpm_port_is_source(port) && port->vbus_vsafe0v) + tcpm_set_state(port, + tcpm_try_snk(port) ? SNK_TRY + : SRC_ATTACHED, + PD_T_CC_DEBOUNCE); + break; + + case SNK_TRY: + port->try_snk_count++; + /* + * Requirements: + * - Do not drive vconn or vbus + * - Terminate CC pins (both) to Rd + * Action: + * - Wait for tDRPTry (PD_T_DRP_TRY). + * Until then, ignore any state changes. + */ + tcpm_set_cc(port, TYPEC_CC_RD); + tcpm_set_state(port, SNK_TRY_WAIT, PD_T_DRP_TRY); + break; + case SNK_TRY_WAIT: + if (tcpm_port_is_sink(port)) { + tcpm_set_state(port, SNK_TRY_WAIT_DEBOUNCE, 0); + } else { + tcpm_set_state(port, SRC_TRYWAIT, 0); + port->max_wait = 0; + } + break; + case SNK_TRY_WAIT_DEBOUNCE: + tcpm_set_state(port, SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS, + PD_T_TRY_CC_DEBOUNCE); + break; + case SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS: + if (port->vbus_present && tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_ATTACHED, 0); + else + port->max_wait = 0; + break; + case SRC_TRYWAIT: + tcpm_set_cc(port, tcpm_rp_cc(port)); + if (port->max_wait == 0) { + port->max_wait = jiffies + + msecs_to_jiffies(PD_T_DRP_TRY); + tcpm_set_state(port, SRC_TRYWAIT_UNATTACHED, + PD_T_DRP_TRY); + } else { + if (time_is_after_jiffies(port->max_wait)) + tcpm_set_state(port, SRC_TRYWAIT_UNATTACHED, + jiffies_to_msecs(port->max_wait - + jiffies)); + else + tcpm_set_state(port, SNK_UNATTACHED, 0); + } + break; + case SRC_TRYWAIT_DEBOUNCE: + tcpm_set_state(port, SRC_ATTACHED, PD_T_CC_DEBOUNCE); + break; + case SRC_TRYWAIT_UNATTACHED: + tcpm_set_state(port, SNK_UNATTACHED, 0); + break; + + case SRC_ATTACHED: + ret = tcpm_src_attach(port); + tcpm_set_state(port, SRC_UNATTACHED, + ret < 0 ? 0 : PD_T_PS_SOURCE_ON); + break; + case SRC_STARTUP: + opmode = tcpm_get_pwr_opmode(tcpm_rp_cc(port)); + typec_set_pwr_opmode(port->typec_port, opmode); + port->pwr_opmode = TYPEC_PWR_MODE_USB; + port->caps_count = 0; + port->negotiated_rev = PD_MAX_REV; + port->message_id = 0; + port->rx_msgid = -1; + port->explicit_contract = false; + /* SNK -> SRC POWER/FAST_ROLE_SWAP finished */ + if (port->ams == POWER_ROLE_SWAP || + port->ams == FAST_ROLE_SWAP) + tcpm_ams_finish(port); + if (!port->pd_supported) { + tcpm_set_state(port, SRC_READY, 0); + break; + } + port->upcoming_state = SRC_SEND_CAPABILITIES; + tcpm_ams_start(port, POWER_NEGOTIATION); + break; + case SRC_SEND_CAPABILITIES: + port->caps_count++; + if (port->caps_count > PD_N_CAPS_COUNT) { + tcpm_set_state(port, SRC_READY, 0); + break; + } + ret = tcpm_pd_send_source_caps(port); + if (ret < 0) { + tcpm_set_state(port, SRC_SEND_CAPABILITIES, + PD_T_SEND_SOURCE_CAP); + } else { + /* + * Per standard, we should clear the reset counter here. + * However, that can result in state machine hang-ups. + * Reset it only in READY state to improve stability. + */ + /* port->hard_reset_count = 0; */ + port->caps_count = 0; + port->pd_capable = true; + tcpm_set_state_cond(port, SRC_SEND_CAPABILITIES_TIMEOUT, + PD_T_SEND_SOURCE_CAP); + } + break; + case SRC_SEND_CAPABILITIES_TIMEOUT: + /* + * Error recovery for a PD_DATA_SOURCE_CAP reply timeout. + * + * PD 2.0 sinks are supposed to accept src-capabilities with a + * 3.0 header and simply ignore any src PDOs which the sink does + * not understand such as PPS but some 2.0 sinks instead ignore + * the entire PD_DATA_SOURCE_CAP message, causing contract + * negotiation to fail. + * + * After PD_N_HARD_RESET_COUNT hard-reset attempts, we try + * sending src-capabilities with a lower PD revision to + * make these broken sinks work. + */ + if (port->hard_reset_count < PD_N_HARD_RESET_COUNT) { + tcpm_set_state(port, HARD_RESET_SEND, 0); + } else if (port->negotiated_rev > PD_REV20) { + port->negotiated_rev--; + port->hard_reset_count = 0; + tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0); + } else { + tcpm_set_state(port, hard_reset_state(port), 0); + } + break; + case SRC_NEGOTIATE_CAPABILITIES: + ret = tcpm_pd_check_request(port); + if (ret < 0) { + tcpm_pd_send_control(port, PD_CTRL_REJECT); + if (!port->explicit_contract) { + tcpm_set_state(port, + SRC_WAIT_NEW_CAPABILITIES, 0); + } else { + tcpm_set_state(port, SRC_READY, 0); + } + } else { + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_set_partner_usb_comm_capable(port, + !!(port->sink_request & RDO_USB_COMM)); + tcpm_set_state(port, SRC_TRANSITION_SUPPLY, + PD_T_SRC_TRANSITION); + } + break; + case SRC_TRANSITION_SUPPLY: + /* XXX: regulator_set_voltage(vbus, ...) */ + tcpm_pd_send_control(port, PD_CTRL_PS_RDY); + port->explicit_contract = true; + typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD); + port->pwr_opmode = TYPEC_PWR_MODE_PD; + tcpm_set_state_cond(port, SRC_READY, 0); + break; + case SRC_READY: +#if 1 + port->hard_reset_count = 0; +#endif + port->try_src_count = 0; + + tcpm_swap_complete(port, 0); + tcpm_typec_connect(port); + + if (port->ams != NONE_AMS) + tcpm_ams_finish(port); + if (port->next_ams != NONE_AMS) { + port->ams = port->next_ams; + port->next_ams = NONE_AMS; + } + + /* + * If previous AMS is interrupted, switch to the upcoming + * state. + */ + if (port->upcoming_state != INVALID_STATE) { + upcoming_state = port->upcoming_state; + port->upcoming_state = INVALID_STATE; + tcpm_set_state(port, upcoming_state, 0); + break; + } + + /* + * 6.4.4.3.1 Discover Identity + * "The Discover Identity Command Shall only be sent to SOP when there is an + * Explicit Contract." + * For now, this driver only supports SOP for DISCOVER_IDENTITY, thus using + * port->explicit_contract to decide whether to send the command. + */ + if (port->explicit_contract) { + tcpm_set_initial_svdm_version(port); + mod_send_discover_delayed_work(port, 0); + } else { + port->send_discover = false; + } + + /* + * 6.3.5 + * Sending ping messages is not necessary if + * - the source operates at vSafe5V + * or + * - The system is not operating in PD mode + * or + * - Both partners are connected using a Type-C connector + * + * There is no actual need to send PD messages since the local + * port type-c and the spec does not clearly say whether PD is + * possible when type-c is connected to Type-A/B + */ + break; + case SRC_WAIT_NEW_CAPABILITIES: + /* Nothing to do... */ + break; + + /* SNK states */ + case SNK_UNATTACHED: + if (!port->non_pd_role_swap) + tcpm_swap_complete(port, -ENOTCONN); + tcpm_pps_complete(port, -ENOTCONN); + tcpm_snk_detach(port); + if (port->potential_contaminant) { + tcpm_set_state(port, CHECK_CONTAMINANT, 0); + break; + } + if (tcpm_start_toggling(port, TYPEC_CC_RD)) { + tcpm_set_state(port, TOGGLING, 0); + break; + } + tcpm_set_cc(port, TYPEC_CC_RD); + if (port->port_type == TYPEC_PORT_DRP) + tcpm_set_state(port, SRC_UNATTACHED, PD_T_DRP_SRC); + break; + case SNK_ATTACH_WAIT: + if ((port->cc1 == TYPEC_CC_OPEN && + port->cc2 != TYPEC_CC_OPEN) || + (port->cc1 != TYPEC_CC_OPEN && + port->cc2 == TYPEC_CC_OPEN)) + tcpm_set_state(port, SNK_DEBOUNCED, + PD_T_CC_DEBOUNCE); + else if (tcpm_port_is_disconnected(port)) + tcpm_set_state(port, SNK_UNATTACHED, + PD_T_PD_DEBOUNCE); + break; + case SNK_DEBOUNCED: + if (tcpm_port_is_disconnected(port)) + tcpm_set_state(port, SNK_UNATTACHED, + PD_T_PD_DEBOUNCE); + else if (port->vbus_present) + tcpm_set_state(port, + tcpm_try_src(port) ? SRC_TRY + : SNK_ATTACHED, + 0); + break; + case SRC_TRY: + port->try_src_count++; + tcpm_set_cc(port, tcpm_rp_cc(port)); + port->max_wait = 0; + tcpm_set_state(port, SRC_TRY_WAIT, 0); + break; + case SRC_TRY_WAIT: + if (port->max_wait == 0) { + port->max_wait = jiffies + + msecs_to_jiffies(PD_T_DRP_TRY); + msecs = PD_T_DRP_TRY; + } else { + if (time_is_after_jiffies(port->max_wait)) + msecs = jiffies_to_msecs(port->max_wait - + jiffies); + else + msecs = 0; + } + tcpm_set_state(port, SNK_TRYWAIT, msecs); + break; + case SRC_TRY_DEBOUNCE: + tcpm_set_state(port, SRC_ATTACHED, PD_T_PD_DEBOUNCE); + break; + case SNK_TRYWAIT: + tcpm_set_cc(port, TYPEC_CC_RD); + tcpm_set_state(port, SNK_TRYWAIT_VBUS, PD_T_CC_DEBOUNCE); + break; + case SNK_TRYWAIT_VBUS: + /* + * TCPM stays in this state indefinitely until VBUS + * is detected as long as Rp is not detected for + * more than a time period of tPDDebounce. + */ + if (port->vbus_present && tcpm_port_is_sink(port)) { + tcpm_set_state(port, SNK_ATTACHED, 0); + break; + } + if (!tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_TRYWAIT_DEBOUNCE, 0); + break; + case SNK_TRYWAIT_DEBOUNCE: + tcpm_set_state(port, SNK_UNATTACHED, PD_T_PD_DEBOUNCE); + break; + case SNK_ATTACHED: + ret = tcpm_snk_attach(port); + if (ret < 0) + tcpm_set_state(port, SNK_UNATTACHED, 0); + else + tcpm_set_state(port, SNK_STARTUP, 0); + break; + case SNK_STARTUP: + opmode = tcpm_get_pwr_opmode(port->polarity ? + port->cc2 : port->cc1); + typec_set_pwr_opmode(port->typec_port, opmode); + port->pwr_opmode = TYPEC_PWR_MODE_USB; + port->negotiated_rev = PD_MAX_REV; + port->message_id = 0; + port->rx_msgid = -1; + port->explicit_contract = false; + + if (port->ams == POWER_ROLE_SWAP || + port->ams == FAST_ROLE_SWAP) + /* SRC -> SNK POWER/FAST_ROLE_SWAP finished */ + tcpm_ams_finish(port); + + tcpm_set_state(port, SNK_DISCOVERY, 0); + break; + case SNK_DISCOVERY: + if (port->vbus_present) { + u32 current_lim = tcpm_get_current_limit(port); + + if (port->slow_charger_loop && (current_lim > PD_P_SNK_STDBY_MW / 5)) + current_lim = PD_P_SNK_STDBY_MW / 5; + tcpm_set_current_limit(port, current_lim, 5000); + /* Not sink vbus if operational current is 0mA */ + tcpm_set_charge(port, !port->pd_supported || + pdo_max_current(port->snk_pdo[0])); + + if (!port->pd_supported) + tcpm_set_state(port, SNK_READY, 0); + else + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); + break; + } + /* + * For DRP, timeouts differ. Also, handling is supposed to be + * different and much more complex (dead battery detection; + * see USB power delivery specification, section 8.3.3.6.1.5.1). + */ + tcpm_set_state(port, hard_reset_state(port), + port->port_type == TYPEC_PORT_DRP ? + PD_T_DB_DETECT : PD_T_NO_RESPONSE); + break; + case SNK_DISCOVERY_DEBOUNCE: + tcpm_set_state(port, SNK_DISCOVERY_DEBOUNCE_DONE, + PD_T_CC_DEBOUNCE); + break; + case SNK_DISCOVERY_DEBOUNCE_DONE: + if (!tcpm_port_is_disconnected(port) && + tcpm_port_is_sink(port) && + ktime_after(port->delayed_runtime, ktime_get())) { + tcpm_set_state(port, SNK_DISCOVERY, + ktime_to_ms(ktime_sub(port->delayed_runtime, ktime_get()))); + break; + } + tcpm_set_state(port, unattached_state(port), 0); + break; + case SNK_WAIT_CAPABILITIES: + ret = port->tcpc->set_pd_rx(port->tcpc, true); + if (ret < 0) { + tcpm_set_state(port, SNK_READY, 0); + break; + } + /* + * If VBUS has never been low, and we time out waiting + * for source cap, try a soft reset first, in case we + * were already in a stable contract before this boot. + * Do this only once. + */ + if (port->vbus_never_low) { + port->vbus_never_low = false; + tcpm_set_state(port, SNK_SOFT_RESET, + PD_T_SINK_WAIT_CAP); + } else { + tcpm_set_state(port, hard_reset_state(port), + PD_T_SINK_WAIT_CAP); + } + break; + case SNK_NEGOTIATE_CAPABILITIES: + port->pd_capable = true; + tcpm_set_partner_usb_comm_capable(port, + !!(port->source_caps[0] & PDO_FIXED_USB_COMM)); + port->hard_reset_count = 0; + ret = tcpm_pd_send_request(port); + if (ret < 0) { + /* Restore back to the original state */ + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD, + port->pps_data.active, + port->supply_voltage); + /* Let the Source send capabilities again. */ + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); + } else { + tcpm_set_state_cond(port, hard_reset_state(port), + PD_T_SENDER_RESPONSE); + } + break; + case SNK_NEGOTIATE_PPS_CAPABILITIES: + ret = tcpm_pd_send_pps_request(port); + if (ret < 0) { + /* Restore back to the original state */ + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD, + port->pps_data.active, + port->supply_voltage); + port->pps_status = ret; + /* + * If this was called due to updates to sink + * capabilities, and pps is no longer valid, we should + * safely fall back to a standard PDO. + */ + if (port->update_sink_caps) + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + else + tcpm_set_state(port, SNK_READY, 0); + } else { + tcpm_set_state_cond(port, hard_reset_state(port), + PD_T_SENDER_RESPONSE); + } + break; + case SNK_TRANSITION_SINK: + /* From the USB PD spec: + * "The Sink Shall transition to Sink Standby before a positive or + * negative voltage transition of VBUS. During Sink Standby + * the Sink Shall reduce its power draw to pSnkStdby." + * + * This is not applicable to PPS though as the port can continue + * to draw negotiated power without switching to standby. + */ + if (port->supply_voltage != port->req_supply_voltage && !port->pps_data.active && + port->current_limit * port->supply_voltage / 1000 > PD_P_SNK_STDBY_MW) { + u32 stdby_ma = PD_P_SNK_STDBY_MW * 1000 / port->supply_voltage; + + tcpm_log(port, "Setting standby current %u mV @ %u mA", + port->supply_voltage, stdby_ma); + tcpm_set_current_limit(port, stdby_ma, port->supply_voltage); + } + fallthrough; + case SNK_TRANSITION_SINK_VBUS: + tcpm_set_state(port, hard_reset_state(port), + PD_T_PS_TRANSITION); + break; + case SNK_READY: + port->try_snk_count = 0; + port->update_sink_caps = false; + if (port->explicit_contract) { + typec_set_pwr_opmode(port->typec_port, + TYPEC_PWR_MODE_PD); + port->pwr_opmode = TYPEC_PWR_MODE_PD; + } + + if (!port->pd_capable && port->slow_charger_loop) + tcpm_set_current_limit(port, tcpm_get_current_limit(port), 5000); + tcpm_swap_complete(port, 0); + tcpm_typec_connect(port); + mod_enable_frs_delayed_work(port, 0); + tcpm_pps_complete(port, port->pps_status); + + if (port->ams != NONE_AMS) + tcpm_ams_finish(port); + if (port->next_ams != NONE_AMS) { + port->ams = port->next_ams; + port->next_ams = NONE_AMS; + } + + /* + * If previous AMS is interrupted, switch to the upcoming + * state. + */ + if (port->upcoming_state != INVALID_STATE) { + upcoming_state = port->upcoming_state; + port->upcoming_state = INVALID_STATE; + tcpm_set_state(port, upcoming_state, 0); + break; + } + + /* + * 6.4.4.3.1 Discover Identity + * "The Discover Identity Command Shall only be sent to SOP when there is an + * Explicit Contract." + * For now, this driver only supports SOP for DISCOVER_IDENTITY, thus using + * port->explicit_contract. + */ + if (port->explicit_contract) { + tcpm_set_initial_svdm_version(port); + mod_send_discover_delayed_work(port, 0); + } else { + port->send_discover = false; + } + + power_supply_changed(port->psy); + break; + + /* Accessory states */ + case ACC_UNATTACHED: + tcpm_acc_detach(port); + tcpm_set_state(port, SRC_UNATTACHED, 0); + break; + case DEBUG_ACC_ATTACHED: + case AUDIO_ACC_ATTACHED: + ret = tcpm_acc_attach(port); + if (ret < 0) + tcpm_set_state(port, ACC_UNATTACHED, 0); + break; + case AUDIO_ACC_DEBOUNCE: + tcpm_set_state(port, ACC_UNATTACHED, PD_T_CC_DEBOUNCE); + break; + + /* Hard_Reset states */ + case HARD_RESET_SEND: + if (port->ams != NONE_AMS) + tcpm_ams_finish(port); + /* + * State machine will be directed to HARD_RESET_START, + * thus set upcoming_state to INVALID_STATE. + */ + port->upcoming_state = INVALID_STATE; + tcpm_ams_start(port, HARD_RESET); + break; + case HARD_RESET_START: + port->sink_cap_done = false; + if (port->tcpc->enable_frs) + port->tcpc->enable_frs(port->tcpc, false); + port->hard_reset_count++; + port->tcpc->set_pd_rx(port->tcpc, false); + tcpm_unregister_altmodes(port); + port->nr_sink_caps = 0; + port->send_discover = true; + if (port->pwr_role == TYPEC_SOURCE) + tcpm_set_state(port, SRC_HARD_RESET_VBUS_OFF, + PD_T_PS_HARD_RESET); + else + tcpm_set_state(port, SNK_HARD_RESET_SINK_OFF, 0); + break; + case SRC_HARD_RESET_VBUS_OFF: + /* + * 7.1.5 Response to Hard Resets + * Hard Reset Signaling indicates a communication failure has occurred and the + * Source Shall stop driving VCONN, Shall remove Rp from the VCONN pin and Shall + * drive VBUS to vSafe0V as shown in Figure 7-9. + */ + tcpm_set_vconn(port, false); + tcpm_set_vbus(port, false); + tcpm_set_roles(port, port->self_powered, TYPEC_SOURCE, + tcpm_data_role_for_source(port)); + /* + * If tcpc fails to notify vbus off, TCPM will wait for PD_T_SAFE_0V + + * PD_T_SRC_RECOVER before turning vbus back on. + * From Table 7-12 Sequence Description for a Source Initiated Hard Reset: + * 4. Policy Engine waits tPSHardReset after sending Hard Reset Signaling and then + * tells the Device Policy Manager to instruct the power supply to perform a + * Hard Reset. The transition to vSafe0V Shall occur within tSafe0V (t2). + * 5. After tSrcRecover the Source applies power to VBUS in an attempt to + * re-establish communication with the Sink and resume USB Default Operation. + * The transition to vSafe5V Shall occur within tSrcTurnOn(t4). + */ + tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SAFE_0V + PD_T_SRC_RECOVER); + break; + case SRC_HARD_RESET_VBUS_ON: + tcpm_set_vconn(port, true); + tcpm_set_vbus(port, true); + if (port->ams == HARD_RESET) + tcpm_ams_finish(port); + if (port->pd_supported) + port->tcpc->set_pd_rx(port->tcpc, true); + tcpm_set_attached_state(port, true); + tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON); + break; + case SNK_HARD_RESET_SINK_OFF: + /* Do not discharge/disconnect during hard reseet */ + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0); + memset(&port->pps_data, 0, sizeof(port->pps_data)); + tcpm_set_vconn(port, false); + if (port->pd_capable) + tcpm_set_charge(port, false); + tcpm_set_roles(port, port->self_powered, TYPEC_SINK, + tcpm_data_role_for_sink(port)); + /* + * VBUS may or may not toggle, depending on the adapter. + * If it doesn't toggle, transition to SNK_HARD_RESET_SINK_ON + * directly after timeout. + */ + tcpm_set_state(port, SNK_HARD_RESET_SINK_ON, PD_T_SAFE_0V); + break; + case SNK_HARD_RESET_WAIT_VBUS: + if (port->ams == HARD_RESET) + tcpm_ams_finish(port); + /* Assume we're disconnected if VBUS doesn't come back. */ + tcpm_set_state(port, SNK_UNATTACHED, + PD_T_SRC_RECOVER_MAX + PD_T_SRC_TURN_ON); + break; + case SNK_HARD_RESET_SINK_ON: + /* Note: There is no guarantee that VBUS is on in this state */ + /* + * XXX: + * The specification suggests that dual mode ports in sink + * mode should transition to state PE_SRC_Transition_to_default. + * See USB power delivery specification chapter 8.3.3.6.1.3. + * This would mean to + * - turn off VCONN, reset power supply + * - request hardware reset + * - turn on VCONN + * - Transition to state PE_Src_Startup + * SNK only ports shall transition to state Snk_Startup + * (see chapter 8.3.3.3.8). + * Similar, dual-mode ports in source mode should transition + * to PE_SNK_Transition_to_default. + */ + if (port->pd_capable) { + tcpm_set_current_limit(port, + tcpm_get_current_limit(port), + 5000); + /* Not sink vbus if operational current is 0mA */ + tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0])); + } + if (port->ams == HARD_RESET) + tcpm_ams_finish(port); + tcpm_set_attached_state(port, true); + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, VSAFE5V); + tcpm_set_state(port, SNK_STARTUP, 0); + break; + + /* Soft_Reset states */ + case SOFT_RESET: + port->message_id = 0; + port->rx_msgid = -1; + /* remove existing capabilities */ + usb_power_delivery_unregister_capabilities(port->partner_source_caps); + port->partner_source_caps = NULL; + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_ams_finish(port); + if (port->pwr_role == TYPEC_SOURCE) { + port->upcoming_state = SRC_SEND_CAPABILITIES; + tcpm_ams_start(port, POWER_NEGOTIATION); + } else { + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); + } + break; + case SRC_SOFT_RESET_WAIT_SNK_TX: + case SNK_SOFT_RESET: + if (port->ams != NONE_AMS) + tcpm_ams_finish(port); + port->upcoming_state = SOFT_RESET_SEND; + tcpm_ams_start(port, SOFT_RESET_AMS); + break; + case SOFT_RESET_SEND: + port->message_id = 0; + port->rx_msgid = -1; + /* remove existing capabilities */ + usb_power_delivery_unregister_capabilities(port->partner_source_caps); + port->partner_source_caps = NULL; + if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET)) + tcpm_set_state_cond(port, hard_reset_state(port), 0); + else + tcpm_set_state_cond(port, hard_reset_state(port), + PD_T_SENDER_RESPONSE); + break; + + /* DR_Swap states */ + case DR_SWAP_SEND: + tcpm_pd_send_control(port, PD_CTRL_DR_SWAP); + if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20) + port->send_discover = true; + tcpm_set_state_cond(port, DR_SWAP_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case DR_SWAP_ACCEPT: + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20) + port->send_discover = true; + tcpm_set_state_cond(port, DR_SWAP_CHANGE_DR, 0); + break; + case DR_SWAP_SEND_TIMEOUT: + tcpm_swap_complete(port, -ETIMEDOUT); + port->send_discover = false; + tcpm_ams_finish(port); + tcpm_set_state(port, ready_state(port), 0); + break; + case DR_SWAP_CHANGE_DR: + tcpm_unregister_altmodes(port); + if (port->data_role == TYPEC_HOST) + tcpm_set_roles(port, true, port->pwr_role, + TYPEC_DEVICE); + else + tcpm_set_roles(port, true, port->pwr_role, + TYPEC_HOST); + tcpm_ams_finish(port); + tcpm_set_state(port, ready_state(port), 0); + break; + + case FR_SWAP_SEND: + if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP)) { + tcpm_set_state(port, ERROR_RECOVERY, 0); + break; + } + tcpm_set_state_cond(port, FR_SWAP_SEND_TIMEOUT, PD_T_SENDER_RESPONSE); + break; + case FR_SWAP_SEND_TIMEOUT: + tcpm_set_state(port, ERROR_RECOVERY, 0); + break; + case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF: + tcpm_set_state(port, ERROR_RECOVERY, PD_T_PS_SOURCE_OFF); + break; + case FR_SWAP_SNK_SRC_NEW_SINK_READY: + if (port->vbus_source) + tcpm_set_state(port, FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED, 0); + else + tcpm_set_state(port, ERROR_RECOVERY, PD_T_RECEIVER_RESPONSE); + break; + case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED: + tcpm_set_pwr_role(port, TYPEC_SOURCE); + if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) { + tcpm_set_state(port, ERROR_RECOVERY, 0); + break; + } + tcpm_set_cc(port, tcpm_rp_cc(port)); + tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START); + break; + + /* PR_Swap states */ + case PR_SWAP_ACCEPT: + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_set_state(port, PR_SWAP_START, 0); + break; + case PR_SWAP_SEND: + tcpm_pd_send_control(port, PD_CTRL_PR_SWAP); + tcpm_set_state_cond(port, PR_SWAP_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case PR_SWAP_SEND_TIMEOUT: + tcpm_swap_complete(port, -ETIMEDOUT); + tcpm_set_state(port, ready_state(port), 0); + break; + case PR_SWAP_START: + tcpm_apply_rc(port); + if (port->pwr_role == TYPEC_SOURCE) + tcpm_set_state(port, PR_SWAP_SRC_SNK_TRANSITION_OFF, + PD_T_SRC_TRANSITION); + else + tcpm_set_state(port, PR_SWAP_SNK_SRC_SINK_OFF, 0); + break; + case PR_SWAP_SRC_SNK_TRANSITION_OFF: + /* + * Prevent vbus discharge circuit from turning on during PR_SWAP + * as this is not a disconnect. + */ + tcpm_set_vbus(port, false); + port->explicit_contract = false; + /* allow time for Vbus discharge, must be < tSrcSwapStdby */ + tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF, + PD_T_SRCSWAPSTDBY); + break; + case PR_SWAP_SRC_SNK_SOURCE_OFF: + tcpm_set_cc(port, TYPEC_CC_RD); + /* allow CC debounce */ + tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED, + PD_T_CC_DEBOUNCE); + break; + case PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED: + /* + * USB-PD standard, 6.2.1.4, Port Power Role: + * "During the Power Role Swap Sequence, for the initial Source + * Port, the Port Power Role field shall be set to Sink in the + * PS_RDY Message indicating that the initial Source’s power + * supply is turned off" + */ + tcpm_set_pwr_role(port, TYPEC_SINK); + if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) { + tcpm_set_state(port, ERROR_RECOVERY, 0); + break; + } + tcpm_set_state(port, ERROR_RECOVERY, PD_T_PS_SOURCE_ON_PRS); + break; + case PR_SWAP_SRC_SNK_SINK_ON: + tcpm_enable_auto_vbus_discharge(port, true); + /* Set the vbus disconnect threshold for implicit contract */ + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, VSAFE5V); + tcpm_set_state(port, SNK_STARTUP, 0); + break; + case PR_SWAP_SNK_SRC_SINK_OFF: + /* will be source, remove existing capabilities */ + usb_power_delivery_unregister_capabilities(port->partner_source_caps); + port->partner_source_caps = NULL; + /* + * Prevent vbus discharge circuit from turning on during PR_SWAP + * as this is not a disconnect. + */ + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, + port->pps_data.active, 0); + tcpm_set_charge(port, false); + tcpm_set_state(port, hard_reset_state(port), + PD_T_PS_SOURCE_OFF); + break; + case PR_SWAP_SNK_SRC_SOURCE_ON: + tcpm_enable_auto_vbus_discharge(port, true); + tcpm_set_cc(port, tcpm_rp_cc(port)); + tcpm_set_vbus(port, true); + /* + * allow time VBUS ramp-up, must be < tNewSrc + * Also, this window overlaps with CC debounce as well. + * So, Wait for the max of two which is PD_T_NEWSRC + */ + tcpm_set_state(port, PR_SWAP_SNK_SRC_SOURCE_ON_VBUS_RAMPED_UP, + PD_T_NEWSRC); + break; + case PR_SWAP_SNK_SRC_SOURCE_ON_VBUS_RAMPED_UP: + /* + * USB PD standard, 6.2.1.4: + * "Subsequent Messages initiated by the Policy Engine, + * such as the PS_RDY Message sent to indicate that Vbus + * is ready, will have the Port Power Role field set to + * Source." + */ + tcpm_set_pwr_role(port, TYPEC_SOURCE); + tcpm_pd_send_control(port, PD_CTRL_PS_RDY); + tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START); + break; + + case VCONN_SWAP_ACCEPT: + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_ams_finish(port); + tcpm_set_state(port, VCONN_SWAP_START, 0); + break; + case VCONN_SWAP_SEND: + tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP); + tcpm_set_state(port, VCONN_SWAP_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case VCONN_SWAP_SEND_TIMEOUT: + tcpm_swap_complete(port, -ETIMEDOUT); + tcpm_set_state(port, ready_state(port), 0); + break; + case VCONN_SWAP_START: + if (port->vconn_role == TYPEC_SOURCE) + tcpm_set_state(port, VCONN_SWAP_WAIT_FOR_VCONN, 0); + else + tcpm_set_state(port, VCONN_SWAP_TURN_ON_VCONN, 0); + break; + case VCONN_SWAP_WAIT_FOR_VCONN: + tcpm_set_state(port, hard_reset_state(port), + PD_T_VCONN_SOURCE_ON); + break; + case VCONN_SWAP_TURN_ON_VCONN: + tcpm_set_vconn(port, true); + tcpm_pd_send_control(port, PD_CTRL_PS_RDY); + tcpm_set_state(port, ready_state(port), 0); + break; + case VCONN_SWAP_TURN_OFF_VCONN: + tcpm_set_vconn(port, false); + tcpm_set_state(port, ready_state(port), 0); + break; + + case DR_SWAP_CANCEL: + case PR_SWAP_CANCEL: + case VCONN_SWAP_CANCEL: + tcpm_swap_complete(port, port->swap_status); + if (port->pwr_role == TYPEC_SOURCE) + tcpm_set_state(port, SRC_READY, 0); + else + tcpm_set_state(port, SNK_READY, 0); + break; + case FR_SWAP_CANCEL: + if (port->pwr_role == TYPEC_SOURCE) + tcpm_set_state(port, SRC_READY, 0); + else + tcpm_set_state(port, SNK_READY, 0); + break; + + case BIST_RX: + switch (BDO_MODE_MASK(port->bist_request)) { + case BDO_MODE_CARRIER2: + tcpm_pd_transmit(port, TCPC_TX_BIST_MODE_2, NULL); + tcpm_set_state(port, unattached_state(port), + PD_T_BIST_CONT_MODE); + break; + case BDO_MODE_TESTDATA: + if (port->tcpc->set_bist_data) { + tcpm_log(port, "Enable BIST MODE TESTDATA"); + port->tcpc->set_bist_data(port->tcpc, true); + } + break; + default: + break; + } + break; + case GET_STATUS_SEND: + tcpm_pd_send_control(port, PD_CTRL_GET_STATUS); + tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case GET_STATUS_SEND_TIMEOUT: + tcpm_set_state(port, ready_state(port), 0); + break; + case GET_PPS_STATUS_SEND: + tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS); + tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case GET_PPS_STATUS_SEND_TIMEOUT: + tcpm_set_state(port, ready_state(port), 0); + break; + case GET_SINK_CAP: + tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP); + tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, PD_T_SENDER_RESPONSE); + break; + case GET_SINK_CAP_TIMEOUT: + port->sink_cap_done = true; + tcpm_set_state(port, ready_state(port), 0); + break; + case ERROR_RECOVERY: + tcpm_swap_complete(port, -EPROTO); + tcpm_pps_complete(port, -EPROTO); + tcpm_set_state(port, PORT_RESET, 0); + break; + case PORT_RESET: + tcpm_reset_port(port); + tcpm_set_cc(port, tcpm_default_state(port) == SNK_UNATTACHED ? + TYPEC_CC_RD : tcpm_rp_cc(port)); + tcpm_set_state(port, PORT_RESET_WAIT_OFF, + PD_T_ERROR_RECOVERY); + break; + case PORT_RESET_WAIT_OFF: + tcpm_set_state(port, + tcpm_default_state(port), + port->vbus_present ? PD_T_PS_SOURCE_OFF : 0); + break; + + /* AMS intermediate state */ + case AMS_START: + if (port->upcoming_state == INVALID_STATE) { + tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ? + SRC_READY : SNK_READY, 0); + break; + } + + upcoming_state = port->upcoming_state; + port->upcoming_state = INVALID_STATE; + tcpm_set_state(port, upcoming_state, 0); + break; + + /* Chunk state */ + case CHUNK_NOT_SUPP: + tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP); + tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ? SRC_READY : SNK_READY, 0); + break; + default: + WARN(1, "Unexpected port state %d\n", port->state); + break; + } +} + +static void tcpm_state_machine_work(struct kthread_work *work) +{ + struct tcpm_port *port = container_of(work, struct tcpm_port, state_machine); + enum tcpm_state prev_state; + + mutex_lock(&port->lock); + port->state_machine_running = true; + + if (port->queued_message && tcpm_send_queued_message(port)) + goto done; + + /* If we were queued due to a delayed state change, update it now */ + if (port->delayed_state) { + tcpm_log(port, "state change %s -> %s [delayed %ld ms]", + tcpm_states[port->state], + tcpm_states[port->delayed_state], port->delay_ms); + port->prev_state = port->state; + port->state = port->delayed_state; + port->delayed_state = INVALID_STATE; + } + + /* + * Continue running as long as we have (non-delayed) state changes + * to make. + */ + do { + prev_state = port->state; + run_state_machine(port); + if (port->queued_message) + tcpm_send_queued_message(port); + } while (port->state != prev_state && !port->delayed_state); + +done: + port->state_machine_running = false; + mutex_unlock(&port->lock); +} + +static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1, + enum typec_cc_status cc2) +{ + enum typec_cc_status old_cc1, old_cc2; + enum tcpm_state new_state; + + old_cc1 = port->cc1; + old_cc2 = port->cc2; + port->cc1 = cc1; + port->cc2 = cc2; + + tcpm_log_force(port, + "CC1: %u -> %u, CC2: %u -> %u [state %s, polarity %d, %s]", + old_cc1, cc1, old_cc2, cc2, tcpm_states[port->state], + port->polarity, + tcpm_port_is_disconnected(port) ? "disconnected" + : "connected"); + + switch (port->state) { + case TOGGLING: + if (tcpm_port_is_debug(port) || tcpm_port_is_audio(port) || + tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_ATTACH_WAIT, 0); + else if (tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_ATTACH_WAIT, 0); + break; + case CHECK_CONTAMINANT: + /* Wait for Toggling to be resumed */ + break; + case SRC_UNATTACHED: + case ACC_UNATTACHED: + if (tcpm_port_is_debug(port) || tcpm_port_is_audio(port) || + tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_ATTACH_WAIT, 0); + break; + case SRC_ATTACH_WAIT: + if (tcpm_port_is_disconnected(port) || + tcpm_port_is_audio_detached(port)) + tcpm_set_state(port, SRC_UNATTACHED, 0); + else if (cc1 != old_cc1 || cc2 != old_cc2) + tcpm_set_state(port, SRC_ATTACH_WAIT, 0); + break; + case SRC_ATTACHED: + case SRC_STARTUP: + case SRC_SEND_CAPABILITIES: + case SRC_READY: + if (tcpm_port_is_disconnected(port) || + !tcpm_port_is_source(port)) { + if (port->port_type == TYPEC_PORT_SRC) + tcpm_set_state(port, SRC_UNATTACHED, tcpm_wait_for_discharge(port)); + else + tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port)); + } + break; + case SNK_UNATTACHED: + if (tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_ATTACH_WAIT, 0); + break; + case SNK_ATTACH_WAIT: + if ((port->cc1 == TYPEC_CC_OPEN && + port->cc2 != TYPEC_CC_OPEN) || + (port->cc1 != TYPEC_CC_OPEN && + port->cc2 == TYPEC_CC_OPEN)) + new_state = SNK_DEBOUNCED; + else if (tcpm_port_is_disconnected(port)) + new_state = SNK_UNATTACHED; + else + break; + if (new_state != port->delayed_state) + tcpm_set_state(port, SNK_ATTACH_WAIT, 0); + break; + case SNK_DEBOUNCED: + if (tcpm_port_is_disconnected(port)) + new_state = SNK_UNATTACHED; + else if (port->vbus_present) + new_state = tcpm_try_src(port) ? SRC_TRY : SNK_ATTACHED; + else + new_state = SNK_UNATTACHED; + if (new_state != port->delayed_state) + tcpm_set_state(port, SNK_DEBOUNCED, 0); + break; + case SNK_READY: + /* + * EXIT condition is based primarily on vbus disconnect and CC is secondary. + * "A port that has entered into USB PD communications with the Source and + * has seen the CC voltage exceed vRd-USB may monitor the CC pin to detect + * cable disconnect in addition to monitoring VBUS. + * + * A port that is monitoring the CC voltage for disconnect (but is not in + * the process of a USB PD PR_Swap or USB PD FR_Swap) shall transition to + * Unattached.SNK within tSinkDisconnect after the CC voltage remains below + * vRd-USB for tPDDebounce." + * + * When set_auto_vbus_discharge_threshold is enabled, CC pins go + * away before vbus decays to disconnect threshold. Allow + * disconnect to be driven by vbus disconnect when auto vbus + * discharge is enabled. + */ + if (!port->auto_vbus_discharge_enabled && tcpm_port_is_disconnected(port)) + tcpm_set_state(port, unattached_state(port), 0); + else if (!port->pd_capable && + (cc1 != old_cc1 || cc2 != old_cc2)) + tcpm_set_current_limit(port, + tcpm_get_current_limit(port), + 5000); + break; + + case AUDIO_ACC_ATTACHED: + if (cc1 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_OPEN) + tcpm_set_state(port, AUDIO_ACC_DEBOUNCE, 0); + break; + case AUDIO_ACC_DEBOUNCE: + if (tcpm_port_is_audio(port)) + tcpm_set_state(port, AUDIO_ACC_ATTACHED, 0); + break; + + case DEBUG_ACC_ATTACHED: + if (cc1 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_OPEN) + tcpm_set_state(port, ACC_UNATTACHED, 0); + break; + + case SNK_TRY: + /* Do nothing, waiting for timeout */ + break; + + case SNK_DISCOVERY: + /* CC line is unstable, wait for debounce */ + if (tcpm_port_is_disconnected(port)) + tcpm_set_state(port, SNK_DISCOVERY_DEBOUNCE, 0); + break; + case SNK_DISCOVERY_DEBOUNCE: + break; + + case SRC_TRYWAIT: + /* Hand over to state machine if needed */ + if (!port->vbus_present && tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_TRYWAIT_DEBOUNCE, 0); + break; + case SRC_TRYWAIT_DEBOUNCE: + if (port->vbus_present || !tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_TRYWAIT, 0); + break; + case SNK_TRY_WAIT_DEBOUNCE: + if (!tcpm_port_is_sink(port)) { + port->max_wait = 0; + tcpm_set_state(port, SRC_TRYWAIT, 0); + } + break; + case SRC_TRY_WAIT: + if (tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_TRY_DEBOUNCE, 0); + break; + case SRC_TRY_DEBOUNCE: + tcpm_set_state(port, SRC_TRY_WAIT, 0); + break; + case SNK_TRYWAIT_DEBOUNCE: + if (tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_TRYWAIT_VBUS, 0); + break; + case SNK_TRYWAIT_VBUS: + if (!tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_TRYWAIT_DEBOUNCE, 0); + break; + case SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS: + if (!tcpm_port_is_sink(port)) + tcpm_set_state(port, SRC_TRYWAIT, PD_T_TRY_CC_DEBOUNCE); + else + tcpm_set_state(port, SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS, 0); + break; + case SNK_TRYWAIT: + /* Do nothing, waiting for tCCDebounce */ + break; + case PR_SWAP_SNK_SRC_SINK_OFF: + case PR_SWAP_SRC_SNK_TRANSITION_OFF: + case PR_SWAP_SRC_SNK_SOURCE_OFF: + case PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED: + case PR_SWAP_SNK_SRC_SOURCE_ON: + /* + * CC state change is expected in PR_SWAP + * Ignore it. + */ + break; + case FR_SWAP_SEND: + case FR_SWAP_SEND_TIMEOUT: + case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF: + case FR_SWAP_SNK_SRC_NEW_SINK_READY: + case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED: + /* Do nothing, CC change expected */ + break; + + case PORT_RESET: + case PORT_RESET_WAIT_OFF: + /* + * State set back to default mode once the timer completes. + * Ignore CC changes here. + */ + break; + default: + /* + * While acting as sink and auto vbus discharge is enabled, Allow disconnect + * to be driven by vbus disconnect. + */ + if (tcpm_port_is_disconnected(port) && !(port->pwr_role == TYPEC_SINK && + port->auto_vbus_discharge_enabled)) + tcpm_set_state(port, unattached_state(port), 0); + break; + } +} + +static void _tcpm_pd_vbus_on(struct tcpm_port *port) +{ + tcpm_log_force(port, "VBUS on"); + port->vbus_present = true; + /* + * When vbus_present is true i.e. Voltage at VBUS is greater than VSAFE5V implicitly + * states that vbus is not at VSAFE0V, hence clear the vbus_vsafe0v flag here. + */ + port->vbus_vsafe0v = false; + + switch (port->state) { + case SNK_TRANSITION_SINK_VBUS: + port->explicit_contract = true; + tcpm_set_state(port, SNK_READY, 0); + break; + case SNK_DISCOVERY: + tcpm_set_state(port, SNK_DISCOVERY, 0); + break; + + case SNK_DEBOUNCED: + tcpm_set_state(port, tcpm_try_src(port) ? SRC_TRY + : SNK_ATTACHED, + 0); + break; + case SNK_HARD_RESET_WAIT_VBUS: + tcpm_set_state(port, SNK_HARD_RESET_SINK_ON, 0); + break; + case SRC_ATTACHED: + tcpm_set_state(port, SRC_STARTUP, 0); + break; + case SRC_HARD_RESET_VBUS_ON: + tcpm_set_state(port, SRC_STARTUP, 0); + break; + + case SNK_TRY: + /* Do nothing, waiting for timeout */ + break; + case SRC_TRYWAIT: + /* Do nothing, Waiting for Rd to be detected */ + break; + case SRC_TRYWAIT_DEBOUNCE: + tcpm_set_state(port, SRC_TRYWAIT, 0); + break; + case SNK_TRY_WAIT_DEBOUNCE: + /* Do nothing, waiting for PD_DEBOUNCE to do be done */ + break; + case SNK_TRYWAIT: + /* Do nothing, waiting for tCCDebounce */ + break; + case SNK_TRYWAIT_VBUS: + if (tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_ATTACHED, 0); + break; + case SNK_TRYWAIT_DEBOUNCE: + /* Do nothing, waiting for Rp */ + break; + case SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS: + if (port->vbus_present && tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_ATTACHED, 0); + break; + case SRC_TRY_WAIT: + case SRC_TRY_DEBOUNCE: + /* Do nothing, waiting for sink detection */ + break; + case FR_SWAP_SEND: + case FR_SWAP_SEND_TIMEOUT: + case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF: + case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED: + if (port->tcpc->frs_sourcing_vbus) + port->tcpc->frs_sourcing_vbus(port->tcpc); + break; + case FR_SWAP_SNK_SRC_NEW_SINK_READY: + if (port->tcpc->frs_sourcing_vbus) + port->tcpc->frs_sourcing_vbus(port->tcpc); + tcpm_set_state(port, FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED, 0); + break; + + case PORT_RESET: + case PORT_RESET_WAIT_OFF: + /* + * State set back to default mode once the timer completes. + * Ignore vbus changes here. + */ + break; + + default: + break; + } +} + +static void _tcpm_pd_vbus_off(struct tcpm_port *port) +{ + tcpm_log_force(port, "VBUS off"); + port->vbus_present = false; + port->vbus_never_low = false; + switch (port->state) { + case SNK_HARD_RESET_SINK_OFF: + tcpm_set_state(port, SNK_HARD_RESET_WAIT_VBUS, 0); + break; + case HARD_RESET_SEND: + break; + case SNK_TRY: + /* Do nothing, waiting for timeout */ + break; + case SRC_TRYWAIT: + /* Hand over to state machine if needed */ + if (tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_TRYWAIT_DEBOUNCE, 0); + break; + case SNK_TRY_WAIT_DEBOUNCE: + /* Do nothing, waiting for PD_DEBOUNCE to do be done */ + break; + case SNK_TRYWAIT: + case SNK_TRYWAIT_VBUS: + case SNK_TRYWAIT_DEBOUNCE: + break; + case SNK_ATTACH_WAIT: + case SNK_DEBOUNCED: + /* Do nothing, as TCPM is still waiting for vbus to reaach VSAFE5V to connect */ + break; + + case SNK_NEGOTIATE_CAPABILITIES: + break; + + case PR_SWAP_SRC_SNK_TRANSITION_OFF: + tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF, 0); + break; + + case PR_SWAP_SNK_SRC_SINK_OFF: + /* Do nothing, expected */ + break; + + case PR_SWAP_SNK_SRC_SOURCE_ON: + /* + * Do nothing when vbus off notification is received. + * TCPM can wait for PD_T_NEWSRC in PR_SWAP_SNK_SRC_SOURCE_ON + * for the vbus source to ramp up. + */ + break; + + case PORT_RESET_WAIT_OFF: + tcpm_set_state(port, tcpm_default_state(port), 0); + break; + + case SRC_TRY_WAIT: + case SRC_TRY_DEBOUNCE: + /* Do nothing, waiting for sink detection */ + break; + + case SRC_STARTUP: + case SRC_SEND_CAPABILITIES: + case SRC_SEND_CAPABILITIES_TIMEOUT: + case SRC_NEGOTIATE_CAPABILITIES: + case SRC_TRANSITION_SUPPLY: + case SRC_READY: + case SRC_WAIT_NEW_CAPABILITIES: + /* + * Force to unattached state to re-initiate connection. + * DRP port should move to Unattached.SNK instead of Unattached.SRC if + * sink removed. Although sink removal here is due to source's vbus collapse, + * treat it the same way for consistency. + */ + if (port->port_type == TYPEC_PORT_SRC) + tcpm_set_state(port, SRC_UNATTACHED, tcpm_wait_for_discharge(port)); + else + tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port)); + break; + + case PORT_RESET: + /* + * State set back to default mode once the timer completes. + * Ignore vbus changes here. + */ + break; + + case FR_SWAP_SEND: + case FR_SWAP_SEND_TIMEOUT: + case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF: + case FR_SWAP_SNK_SRC_NEW_SINK_READY: + case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED: + /* Do nothing, vbus drop expected */ + break; + + case SNK_HARD_RESET_WAIT_VBUS: + /* Do nothing, its OK to receive vbus off events */ + break; + + default: + if (port->pwr_role == TYPEC_SINK && port->attached) + tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port)); + break; + } +} + +static void _tcpm_pd_vbus_vsafe0v(struct tcpm_port *port) +{ + tcpm_log_force(port, "VBUS VSAFE0V"); + port->vbus_vsafe0v = true; + switch (port->state) { + case SRC_HARD_RESET_VBUS_OFF: + /* + * After establishing the vSafe0V voltage condition on VBUS, the Source Shall wait + * tSrcRecover before re-applying VCONN and restoring VBUS to vSafe5V. + */ + tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER); + break; + case SRC_ATTACH_WAIT: + if (tcpm_port_is_source(port)) + tcpm_set_state(port, tcpm_try_snk(port) ? SNK_TRY : SRC_ATTACHED, + PD_T_CC_DEBOUNCE); + break; + case SRC_STARTUP: + case SRC_SEND_CAPABILITIES: + case SRC_SEND_CAPABILITIES_TIMEOUT: + case SRC_NEGOTIATE_CAPABILITIES: + case SRC_TRANSITION_SUPPLY: + case SRC_READY: + case SRC_WAIT_NEW_CAPABILITIES: + if (port->auto_vbus_discharge_enabled) { + if (port->port_type == TYPEC_PORT_SRC) + tcpm_set_state(port, SRC_UNATTACHED, 0); + else + tcpm_set_state(port, SNK_UNATTACHED, 0); + } + break; + case PR_SWAP_SNK_SRC_SINK_OFF: + case PR_SWAP_SNK_SRC_SOURCE_ON: + /* Do nothing, vsafe0v is expected during transition */ + break; + case SNK_ATTACH_WAIT: + case SNK_DEBOUNCED: + /*Do nothing, still waiting for VSAFE5V for connect */ + break; + case SNK_HARD_RESET_WAIT_VBUS: + /* Do nothing, its OK to receive vbus off events */ + break; + default: + if (port->pwr_role == TYPEC_SINK && port->auto_vbus_discharge_enabled) + tcpm_set_state(port, SNK_UNATTACHED, 0); + break; + } +} + +static void _tcpm_pd_hard_reset(struct tcpm_port *port) +{ + tcpm_log_force(port, "Received hard reset"); + if (port->bist_request == BDO_MODE_TESTDATA && port->tcpc->set_bist_data) + port->tcpc->set_bist_data(port->tcpc, false); + + switch (port->state) { + case ERROR_RECOVERY: + case PORT_RESET: + case PORT_RESET_WAIT_OFF: + return; + default: + break; + } + + if (port->ams != NONE_AMS) + port->ams = NONE_AMS; + if (port->hard_reset_count < PD_N_HARD_RESET_COUNT) + port->ams = HARD_RESET; + /* + * If we keep receiving hard reset requests, executing the hard reset + * must have failed. Revert to error recovery if that happens. + */ + tcpm_set_state(port, + port->hard_reset_count < PD_N_HARD_RESET_COUNT ? + HARD_RESET_START : ERROR_RECOVERY, + 0); +} + +static void tcpm_pd_event_handler(struct kthread_work *work) +{ + struct tcpm_port *port = container_of(work, struct tcpm_port, + event_work); + u32 events; + + mutex_lock(&port->lock); + + spin_lock(&port->pd_event_lock); + while (port->pd_events) { + events = port->pd_events; + port->pd_events = 0; + spin_unlock(&port->pd_event_lock); + if (events & TCPM_RESET_EVENT) + _tcpm_pd_hard_reset(port); + if (events & TCPM_VBUS_EVENT) { + bool vbus; + + vbus = port->tcpc->get_vbus(port->tcpc); + if (vbus) { + _tcpm_pd_vbus_on(port); + } else { + _tcpm_pd_vbus_off(port); + /* + * When TCPC does not support detecting vsafe0v voltage level, + * treat vbus absent as vsafe0v. Else invoke is_vbus_vsafe0v + * to see if vbus has discharge to VSAFE0V. + */ + if (!port->tcpc->is_vbus_vsafe0v || + port->tcpc->is_vbus_vsafe0v(port->tcpc)) + _tcpm_pd_vbus_vsafe0v(port); + } + } + if (events & TCPM_CC_EVENT) { + enum typec_cc_status cc1, cc2; + + if (port->tcpc->get_cc(port->tcpc, &cc1, &cc2) == 0) + _tcpm_cc_change(port, cc1, cc2); + } + if (events & TCPM_FRS_EVENT) { + if (port->state == SNK_READY) { + int ret; + + port->upcoming_state = FR_SWAP_SEND; + ret = tcpm_ams_start(port, FAST_ROLE_SWAP); + if (ret == -EAGAIN) + port->upcoming_state = INVALID_STATE; + } else { + tcpm_log(port, "Discarding FRS_SIGNAL! Not in sink ready"); + } + } + if (events & TCPM_SOURCING_VBUS) { + tcpm_log(port, "sourcing vbus"); + /* + * In fast role swap case TCPC autonomously sources vbus. Set vbus_source + * true as TCPM wouldn't have called tcpm_set_vbus. + * + * When vbus is sourced on the command on TCPM i.e. TCPM called + * tcpm_set_vbus to source vbus, vbus_source would already be true. + */ + port->vbus_source = true; + _tcpm_pd_vbus_on(port); + } + if (events & TCPM_PORT_CLEAN) { + tcpm_log(port, "port clean"); + if (port->state == CHECK_CONTAMINANT) { + if (tcpm_start_toggling(port, tcpm_rp_cc(port))) + tcpm_set_state(port, TOGGLING, 0); + else + tcpm_set_state(port, tcpm_default_state(port), 0); + } + } + + spin_lock(&port->pd_event_lock); + } + spin_unlock(&port->pd_event_lock); + mutex_unlock(&port->lock); +} + +void tcpm_cc_change(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events |= TCPM_CC_EVENT; + spin_unlock(&port->pd_event_lock); + kthread_queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_cc_change); + +void tcpm_vbus_change(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events |= TCPM_VBUS_EVENT; + spin_unlock(&port->pd_event_lock); + kthread_queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_vbus_change); + +void tcpm_pd_hard_reset(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events = TCPM_RESET_EVENT; + spin_unlock(&port->pd_event_lock); + kthread_queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_pd_hard_reset); + +void tcpm_sink_frs(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events |= TCPM_FRS_EVENT; + spin_unlock(&port->pd_event_lock); + kthread_queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_sink_frs); + +void tcpm_sourcing_vbus(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events |= TCPM_SOURCING_VBUS; + spin_unlock(&port->pd_event_lock); + kthread_queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_sourcing_vbus); + +void tcpm_port_clean(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events |= TCPM_PORT_CLEAN; + spin_unlock(&port->pd_event_lock); + kthread_queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_port_clean); + +bool tcpm_port_is_toggling(struct tcpm_port *port) +{ + return port->port_type == TYPEC_PORT_DRP && port->state == TOGGLING; +} +EXPORT_SYMBOL_GPL(tcpm_port_is_toggling); + +static void tcpm_enable_frs_work(struct kthread_work *work) +{ + struct tcpm_port *port = container_of(work, struct tcpm_port, enable_frs); + int ret; + + mutex_lock(&port->lock); + /* Not FRS capable */ + if (!port->connected || port->port_type != TYPEC_PORT_DRP || + port->pwr_opmode != TYPEC_PWR_MODE_PD || + !port->tcpc->enable_frs || + /* Sink caps queried */ + port->sink_cap_done || port->negotiated_rev < PD_REV30) + goto unlock; + + /* Send when the state machine is idle */ + if (port->state != SNK_READY || port->vdm_sm_running || port->send_discover) + goto resched; + + port->upcoming_state = GET_SINK_CAP; + ret = tcpm_ams_start(port, GET_SINK_CAPABILITIES); + if (ret == -EAGAIN) { + port->upcoming_state = INVALID_STATE; + } else { + port->sink_cap_done = true; + goto unlock; + } +resched: + mod_enable_frs_delayed_work(port, GET_SINK_CAP_RETRY_MS); +unlock: + mutex_unlock(&port->lock); +} + +static void tcpm_send_discover_work(struct kthread_work *work) +{ + struct tcpm_port *port = container_of(work, struct tcpm_port, send_discover_work); + + mutex_lock(&port->lock); + /* No need to send DISCOVER_IDENTITY anymore */ + if (!port->send_discover) + goto unlock; + + if (port->data_role == TYPEC_DEVICE && port->negotiated_rev < PD_REV30) { + port->send_discover = false; + goto unlock; + } + + /* Retry if the port is not idle */ + if ((port->state != SRC_READY && port->state != SNK_READY) || port->vdm_sm_running) { + mod_send_discover_delayed_work(port, SEND_DISCOVER_RETRY_MS); + goto unlock; + } + + tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0); + +unlock: + mutex_unlock(&port->lock); +} + +static int tcpm_dr_set(struct typec_port *p, enum typec_data_role data) +{ + struct tcpm_port *port = typec_get_drvdata(p); + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (port->typec_caps.data != TYPEC_PORT_DRD) { + ret = -EINVAL; + goto port_unlock; + } + if (port->state != SRC_READY && port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (port->data_role == data) { + ret = 0; + goto port_unlock; + } + + /* + * XXX + * 6.3.9: If an alternate mode is active, a request to swap + * alternate modes shall trigger a port reset. + * Reject data role swap request in this case. + */ + + if (!port->pd_capable) { + /* + * If the partner is not PD capable, reset the port to + * trigger a role change. This can only work if a preferred + * role is configured, and if it matches the requested role. + */ + if (port->try_role == TYPEC_NO_PREFERRED_ROLE || + port->try_role == port->pwr_role) { + ret = -EINVAL; + goto port_unlock; + } + port->non_pd_role_swap = true; + tcpm_set_state(port, PORT_RESET, 0); + } else { + port->upcoming_state = DR_SWAP_SEND; + ret = tcpm_ams_start(port, DATA_ROLE_SWAP); + if (ret == -EAGAIN) { + port->upcoming_state = INVALID_STATE; + goto port_unlock; + } + } + + port->swap_status = 0; + port->swap_pending = true; + reinit_completion(&port->swap_complete); + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->swap_complete, + msecs_to_jiffies(PD_ROLE_SWAP_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->swap_status; + + port->non_pd_role_swap = false; + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + return ret; +} + +static int tcpm_pr_set(struct typec_port *p, enum typec_role role) +{ + struct tcpm_port *port = typec_get_drvdata(p); + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (port->port_type != TYPEC_PORT_DRP) { + ret = -EINVAL; + goto port_unlock; + } + if (port->state != SRC_READY && port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (role == port->pwr_role) { + ret = 0; + goto port_unlock; + } + + port->upcoming_state = PR_SWAP_SEND; + ret = tcpm_ams_start(port, POWER_ROLE_SWAP); + if (ret == -EAGAIN) { + port->upcoming_state = INVALID_STATE; + goto port_unlock; + } + + port->swap_status = 0; + port->swap_pending = true; + reinit_completion(&port->swap_complete); + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->swap_complete, + msecs_to_jiffies(PD_ROLE_SWAP_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->swap_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + return ret; +} + +static int tcpm_vconn_set(struct typec_port *p, enum typec_role role) +{ + struct tcpm_port *port = typec_get_drvdata(p); + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (port->state != SRC_READY && port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (role == port->vconn_role) { + ret = 0; + goto port_unlock; + } + + port->upcoming_state = VCONN_SWAP_SEND; + ret = tcpm_ams_start(port, VCONN_SWAP); + if (ret == -EAGAIN) { + port->upcoming_state = INVALID_STATE; + goto port_unlock; + } + + port->swap_status = 0; + port->swap_pending = true; + reinit_completion(&port->swap_complete); + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->swap_complete, + msecs_to_jiffies(PD_ROLE_SWAP_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->swap_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + return ret; +} + +static int tcpm_try_role(struct typec_port *p, int role) +{ + struct tcpm_port *port = typec_get_drvdata(p); + struct tcpc_dev *tcpc = port->tcpc; + int ret = 0; + + mutex_lock(&port->lock); + if (tcpc->try_role) + ret = tcpc->try_role(tcpc, role); + if (!ret) + port->try_role = role; + port->try_src_count = 0; + port->try_snk_count = 0; + mutex_unlock(&port->lock); + + return ret; +} + +static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 req_op_curr) +{ + unsigned int target_mw; + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (!port->pps_data.active) { + ret = -EOPNOTSUPP; + goto port_unlock; + } + + if (port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (req_op_curr > port->pps_data.max_curr) { + ret = -EINVAL; + goto port_unlock; + } + + target_mw = (req_op_curr * port->supply_voltage) / 1000; + if (target_mw < port->operating_snk_mw) { + ret = -EINVAL; + goto port_unlock; + } + + port->upcoming_state = SNK_NEGOTIATE_PPS_CAPABILITIES; + ret = tcpm_ams_start(port, POWER_NEGOTIATION); + if (ret == -EAGAIN) { + port->upcoming_state = INVALID_STATE; + goto port_unlock; + } + + /* Round down operating current to align with PPS valid steps */ + req_op_curr = req_op_curr - (req_op_curr % RDO_PROG_CURR_MA_STEP); + + reinit_completion(&port->pps_complete); + port->pps_data.req_op_curr = req_op_curr; + port->pps_status = 0; + port->pps_pending = true; + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->pps_complete, + msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->pps_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + + return ret; +} + +static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 req_out_volt) +{ + unsigned int target_mw; + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (!port->pps_data.active) { + ret = -EOPNOTSUPP; + goto port_unlock; + } + + if (port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + target_mw = (port->current_limit * req_out_volt) / 1000; + if (target_mw < port->operating_snk_mw) { + ret = -EINVAL; + goto port_unlock; + } + + port->upcoming_state = SNK_NEGOTIATE_PPS_CAPABILITIES; + ret = tcpm_ams_start(port, POWER_NEGOTIATION); + if (ret == -EAGAIN) { + port->upcoming_state = INVALID_STATE; + goto port_unlock; + } + + /* Round down output voltage to align with PPS valid steps */ + req_out_volt = req_out_volt - (req_out_volt % RDO_PROG_VOLT_MV_STEP); + + reinit_completion(&port->pps_complete); + port->pps_data.req_out_volt = req_out_volt; + port->pps_status = 0; + port->pps_pending = true; + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->pps_complete, + msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->pps_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + + return ret; +} + +static int tcpm_pps_activate(struct tcpm_port *port, bool activate) +{ + int ret = 0; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (!port->pps_data.supported) { + ret = -EOPNOTSUPP; + goto port_unlock; + } + + /* Trying to deactivate PPS when already deactivated so just bail */ + if (!port->pps_data.active && !activate) + goto port_unlock; + + if (port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (activate) + port->upcoming_state = SNK_NEGOTIATE_PPS_CAPABILITIES; + else + port->upcoming_state = SNK_NEGOTIATE_CAPABILITIES; + ret = tcpm_ams_start(port, POWER_NEGOTIATION); + if (ret == -EAGAIN) { + port->upcoming_state = INVALID_STATE; + goto port_unlock; + } + + reinit_completion(&port->pps_complete); + port->pps_status = 0; + port->pps_pending = true; + + /* Trigger PPS request or move back to standard PDO contract */ + if (activate) { + port->pps_data.req_out_volt = port->supply_voltage; + port->pps_data.req_op_curr = port->current_limit; + } + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->pps_complete, + msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->pps_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + + return ret; +} + +static void tcpm_init(struct tcpm_port *port) +{ + enum typec_cc_status cc1, cc2; + + port->tcpc->init(port->tcpc); + + tcpm_reset_port(port); + + /* + * XXX + * Should possibly wait for VBUS to settle if it was enabled locally + * since tcpm_reset_port() will disable VBUS. + */ + port->vbus_present = port->tcpc->get_vbus(port->tcpc); + if (port->vbus_present) + port->vbus_never_low = true; + + /* + * 1. When vbus_present is true, voltage on VBUS is already at VSAFE5V. + * So implicitly vbus_vsafe0v = false. + * + * 2. When vbus_present is false and TCPC does NOT support querying + * vsafe0v status, then, it's best to assume vbus is at VSAFE0V i.e. + * vbus_vsafe0v is true. + * + * 3. When vbus_present is false and TCPC does support querying vsafe0v, + * then, query tcpc for vsafe0v status. + */ + if (port->vbus_present) + port->vbus_vsafe0v = false; + else if (!port->tcpc->is_vbus_vsafe0v) + port->vbus_vsafe0v = true; + else + port->vbus_vsafe0v = port->tcpc->is_vbus_vsafe0v(port->tcpc); + + tcpm_set_state(port, tcpm_default_state(port), 0); + + if (port->tcpc->get_cc(port->tcpc, &cc1, &cc2) == 0) + _tcpm_cc_change(port, cc1, cc2); + + /* + * Some adapters need a clean slate at startup, and won't recover + * otherwise. So do not try to be fancy and force a clean disconnect. + */ + tcpm_set_state(port, PORT_RESET, 0); +} + +static int tcpm_port_type_set(struct typec_port *p, enum typec_port_type type) +{ + struct tcpm_port *port = typec_get_drvdata(p); + + mutex_lock(&port->lock); + if (type == port->port_type) + goto port_unlock; + + port->port_type = type; + + if (!port->connected) { + tcpm_set_state(port, PORT_RESET, 0); + } else if (type == TYPEC_PORT_SNK) { + if (!(port->pwr_role == TYPEC_SINK && + port->data_role == TYPEC_DEVICE)) + tcpm_set_state(port, PORT_RESET, 0); + } else if (type == TYPEC_PORT_SRC) { + if (!(port->pwr_role == TYPEC_SOURCE && + port->data_role == TYPEC_HOST)) + tcpm_set_state(port, PORT_RESET, 0); + } + +port_unlock: + mutex_unlock(&port->lock); + return 0; +} + +static const struct typec_operations tcpm_ops = { + .try_role = tcpm_try_role, + .dr_set = tcpm_dr_set, + .pr_set = tcpm_pr_set, + .vconn_set = tcpm_vconn_set, + .port_type_set = tcpm_port_type_set +}; + +void tcpm_tcpc_reset(struct tcpm_port *port) +{ + mutex_lock(&port->lock); + /* XXX: Maintain PD connection if possible? */ + tcpm_init(port); + mutex_unlock(&port->lock); +} +EXPORT_SYMBOL_GPL(tcpm_tcpc_reset); + +static void tcpm_port_unregister_pd(struct tcpm_port *port) +{ + usb_power_delivery_unregister_capabilities(port->port_sink_caps); + port->port_sink_caps = NULL; + usb_power_delivery_unregister_capabilities(port->port_source_caps); + port->port_source_caps = NULL; + usb_power_delivery_unregister(port->pd); + port->pd = NULL; +} + +static int tcpm_port_register_pd(struct tcpm_port *port) +{ + struct usb_power_delivery_desc desc = { port->typec_caps.pd_revision }; + struct usb_power_delivery_capabilities_desc caps = { }; + struct usb_power_delivery_capabilities *cap; + int ret; + + if (!port->nr_src_pdo && !port->nr_snk_pdo) + return 0; + + port->pd = usb_power_delivery_register(port->dev, &desc); + if (IS_ERR(port->pd)) { + ret = PTR_ERR(port->pd); + goto err_unregister; + } + + if (port->nr_src_pdo) { + memcpy_and_pad(caps.pdo, sizeof(caps.pdo), port->src_pdo, + port->nr_src_pdo * sizeof(u32), 0); + caps.role = TYPEC_SOURCE; + + cap = usb_power_delivery_register_capabilities(port->pd, &caps); + if (IS_ERR(cap)) { + ret = PTR_ERR(cap); + goto err_unregister; + } + + port->port_source_caps = cap; + } + + if (port->nr_snk_pdo) { + memcpy_and_pad(caps.pdo, sizeof(caps.pdo), port->snk_pdo, + port->nr_snk_pdo * sizeof(u32), 0); + caps.role = TYPEC_SINK; + + cap = usb_power_delivery_register_capabilities(port->pd, &caps); + if (IS_ERR(cap)) { + ret = PTR_ERR(cap); + goto err_unregister; + } + + port->port_sink_caps = cap; + } + + return 0; + +err_unregister: + tcpm_port_unregister_pd(port); + + return ret; +} + +static int tcpm_fw_get_caps(struct tcpm_port *port, + struct fwnode_handle *fwnode) +{ + const char *opmode_str; + int ret; + u32 mw, frs_current; + + if (!fwnode) + return -EINVAL; + + /* + * This fwnode has a "compatible" property, but is never populated as a + * struct device. Instead we simply parse it to read the properties. + * This it breaks fw_devlink=on. To maintain backward compatibility + * with existing DT files, we work around this by deleting any + * fwnode_links to/from this fwnode. + */ + fw_devlink_purge_absent_suppliers(fwnode); + + ret = typec_get_fw_cap(&port->typec_caps, fwnode); + if (ret < 0) + return ret; + + port->port_type = port->typec_caps.type; + port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-disable"); + + port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop"); + if (port->port_type == TYPEC_PORT_SNK) + goto sink; + + /* Get Source PDOs for the PD port or Source Rp value for the non-PD port */ + if (port->pd_supported) { + ret = fwnode_property_count_u32(fwnode, "source-pdos"); + if (ret == 0) + return -EINVAL; + else if (ret < 0) + return ret; + + port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS); + ret = fwnode_property_read_u32_array(fwnode, "source-pdos", + port->src_pdo, port->nr_src_pdo); + if (ret) + return ret; + ret = tcpm_validate_caps(port, port->src_pdo, port->nr_src_pdo); + if (ret) + return ret; + } else { + ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str); + if (ret) + return ret; + ret = typec_find_pwr_opmode(opmode_str); + if (ret < 0) + return ret; + port->src_rp = tcpm_pwr_opmode_to_rp(ret); + } + + if (port->port_type == TYPEC_PORT_SRC) + return 0; + +sink: + port->self_powered = fwnode_property_read_bool(fwnode, "self-powered"); + + if (!port->pd_supported) + return 0; + + /* Get sink pdos */ + ret = fwnode_property_count_u32(fwnode, "sink-pdos"); + if (ret <= 0) + return -EINVAL; + + port->nr_snk_pdo = min(ret, PDO_MAX_OBJECTS); + ret = fwnode_property_read_u32_array(fwnode, "sink-pdos", + port->snk_pdo, port->nr_snk_pdo); + if ((ret < 0) || tcpm_validate_caps(port, port->snk_pdo, + port->nr_snk_pdo)) + return -EINVAL; + + if (fwnode_property_read_u32(fwnode, "op-sink-microwatt", &mw) < 0) + return -EINVAL; + port->operating_snk_mw = mw / 1000; + + /* FRS can only be supported by DRP ports */ + if (port->port_type == TYPEC_PORT_DRP) { + ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current", + &frs_current); + if (ret >= 0 && frs_current <= FRS_5V_3A) + port->new_source_frs_current = frs_current; + } + + /* sink-vdos is optional */ + ret = fwnode_property_count_u32(fwnode, "sink-vdos"); + if (ret < 0) + ret = 0; + + port->nr_snk_vdo = min(ret, VDO_MAX_OBJECTS); + if (port->nr_snk_vdo) { + ret = fwnode_property_read_u32_array(fwnode, "sink-vdos", + port->snk_vdo, + port->nr_snk_vdo); + if (ret < 0) + return ret; + } + + /* If sink-vdos is found, sink-vdos-v1 is expected for backward compatibility. */ + if (port->nr_snk_vdo) { + ret = fwnode_property_count_u32(fwnode, "sink-vdos-v1"); + if (ret < 0) + return ret; + else if (ret == 0) + return -ENODATA; + + port->nr_snk_vdo_v1 = min(ret, VDO_MAX_OBJECTS); + ret = fwnode_property_read_u32_array(fwnode, "sink-vdos-v1", + port->snk_vdo_v1, + port->nr_snk_vdo_v1); + if (ret < 0) + return ret; + } + + return 0; +} + +/* Power Supply access to expose source power information */ +enum tcpm_psy_online_states { + TCPM_PSY_OFFLINE = 0, + TCPM_PSY_FIXED_ONLINE, + TCPM_PSY_PROG_ONLINE, +}; + +static enum power_supply_property tcpm_psy_props[] = { + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static int tcpm_psy_get_online(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->vbus_charge) { + if (port->pps_data.active) + val->intval = TCPM_PSY_PROG_ONLINE; + else + val->intval = TCPM_PSY_FIXED_ONLINE; + } else { + val->intval = TCPM_PSY_OFFLINE; + } + + return 0; +} + +static int tcpm_psy_get_voltage_min(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->pps_data.active) + val->intval = port->pps_data.min_volt * 1000; + else + val->intval = port->supply_voltage * 1000; + + return 0; +} + +static int tcpm_psy_get_voltage_max(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->pps_data.active) + val->intval = port->pps_data.max_volt * 1000; + else + val->intval = port->supply_voltage * 1000; + + return 0; +} + +static int tcpm_psy_get_voltage_now(struct tcpm_port *port, + union power_supply_propval *val) +{ + val->intval = port->supply_voltage * 1000; + + return 0; +} + +static int tcpm_psy_get_current_max(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->pps_data.active) + val->intval = port->pps_data.max_curr * 1000; + else + val->intval = port->current_limit * 1000; + + return 0; +} + +static int tcpm_psy_get_current_now(struct tcpm_port *port, + union power_supply_propval *val) +{ + val->intval = port->current_limit * 1000; + + return 0; +} + +static int tcpm_psy_get_input_power_limit(struct tcpm_port *port, + union power_supply_propval *val) +{ + unsigned int src_mv, src_ma, max_src_uw = 0; + unsigned int i, tmp; + + for (i = 0; i < port->nr_source_caps; i++) { + u32 pdo = port->source_caps[i]; + + if (pdo_type(pdo) == PDO_TYPE_FIXED) { + src_mv = pdo_fixed_voltage(pdo); + src_ma = pdo_max_current(pdo); + tmp = src_mv * src_ma; + max_src_uw = tmp > max_src_uw ? tmp : max_src_uw; + } + } + + val->intval = max_src_uw; + return 0; +} + +static int tcpm_psy_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct tcpm_port *port = power_supply_get_drvdata(psy); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = port->usb_type; + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = tcpm_psy_get_online(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + ret = tcpm_psy_get_voltage_min(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + ret = tcpm_psy_get_voltage_max(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = tcpm_psy_get_voltage_now(port, val); + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + ret = tcpm_psy_get_current_max(port, val); + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = tcpm_psy_get_current_now(port, val); + break; + case POWER_SUPPLY_PROP_INPUT_POWER_LIMIT: + tcpm_psy_get_input_power_limit(port, val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int tcpm_psy_set_online(struct tcpm_port *port, + const union power_supply_propval *val) +{ + int ret; + + switch (val->intval) { + case TCPM_PSY_FIXED_ONLINE: + ret = tcpm_pps_activate(port, false); + break; + case TCPM_PSY_PROG_ONLINE: + ret = tcpm_pps_activate(port, true); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int tcpm_psy_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct tcpm_port *port = power_supply_get_drvdata(psy); + int ret; + + /* + * All the properties below are related to USB PD. The check needs to be + * property specific when a non-pd related property is added. + */ + if (!port->pd_supported) + return -EOPNOTSUPP; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = tcpm_psy_set_online(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = tcpm_pps_set_out_volt(port, val->intval / 1000); + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (val->intval > port->pps_data.max_curr * 1000) + ret = -EINVAL; + else + ret = tcpm_pps_set_op_curr(port, val->intval / 1000); + break; + default: + ret = -EINVAL; + break; + } + power_supply_changed(port->psy); + return ret; +} + +static int tcpm_psy_prop_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_CURRENT_NOW: + return 1; + default: + return 0; + } +} + +static enum power_supply_usb_type tcpm_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_C, + POWER_SUPPLY_USB_TYPE_PD, + POWER_SUPPLY_USB_TYPE_PD_PPS, +}; + +static const char *tcpm_psy_name_prefix = "tcpm-source-psy-"; + +static int devm_tcpm_psy_register(struct tcpm_port *port) +{ + struct power_supply_config psy_cfg = {}; + const char *port_dev_name = dev_name(port->dev); + size_t psy_name_len = strlen(tcpm_psy_name_prefix) + + strlen(port_dev_name) + 1; + char *psy_name; + + psy_cfg.drv_data = port; + psy_cfg.fwnode = dev_fwnode(port->dev); + psy_name = devm_kzalloc(port->dev, psy_name_len, GFP_KERNEL); + if (!psy_name) + return -ENOMEM; + + snprintf(psy_name, psy_name_len, "%s%s", tcpm_psy_name_prefix, + port_dev_name); + port->psy_desc.name = psy_name; + port->psy_desc.type = POWER_SUPPLY_TYPE_USB; + port->psy_desc.usb_types = tcpm_psy_usb_types; + port->psy_desc.num_usb_types = ARRAY_SIZE(tcpm_psy_usb_types); + port->psy_desc.properties = tcpm_psy_props; + port->psy_desc.num_properties = ARRAY_SIZE(tcpm_psy_props); + port->psy_desc.get_property = tcpm_psy_get_prop; + port->psy_desc.set_property = tcpm_psy_set_prop; + port->psy_desc.property_is_writeable = tcpm_psy_prop_writeable; + + port->usb_type = POWER_SUPPLY_USB_TYPE_C; + + port->psy = devm_power_supply_register(port->dev, &port->psy_desc, + &psy_cfg); + + return PTR_ERR_OR_ZERO(port->psy); +} + +static enum hrtimer_restart state_machine_timer_handler(struct hrtimer *timer) +{ + struct tcpm_port *port = container_of(timer, struct tcpm_port, state_machine_timer); + + if (port->registered) + kthread_queue_work(port->wq, &port->state_machine); + return HRTIMER_NORESTART; +} + +static enum hrtimer_restart vdm_state_machine_timer_handler(struct hrtimer *timer) +{ + struct tcpm_port *port = container_of(timer, struct tcpm_port, vdm_state_machine_timer); + + if (port->registered) + kthread_queue_work(port->wq, &port->vdm_state_machine); + return HRTIMER_NORESTART; +} + +static enum hrtimer_restart enable_frs_timer_handler(struct hrtimer *timer) +{ + struct tcpm_port *port = container_of(timer, struct tcpm_port, enable_frs_timer); + + if (port->registered) + kthread_queue_work(port->wq, &port->enable_frs); + return HRTIMER_NORESTART; +} + +static enum hrtimer_restart send_discover_timer_handler(struct hrtimer *timer) +{ + struct tcpm_port *port = container_of(timer, struct tcpm_port, send_discover_timer); + + if (port->registered) + kthread_queue_work(port->wq, &port->send_discover_work); + return HRTIMER_NORESTART; +} + +struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) +{ + struct tcpm_port *port; + int err; + + if (!dev || !tcpc || + !tcpc->get_vbus || !tcpc->set_cc || !tcpc->get_cc || + !tcpc->set_polarity || !tcpc->set_vconn || !tcpc->set_vbus || + !tcpc->set_pd_rx || !tcpc->set_roles || !tcpc->pd_transmit) + return ERR_PTR(-EINVAL); + + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); + if (!port) + return ERR_PTR(-ENOMEM); + + port->dev = dev; + port->tcpc = tcpc; + + mutex_init(&port->lock); + mutex_init(&port->swap_lock); + + port->wq = kthread_create_worker(0, dev_name(dev)); + if (IS_ERR(port->wq)) + return ERR_CAST(port->wq); + sched_set_fifo(port->wq->task); + + kthread_init_work(&port->state_machine, tcpm_state_machine_work); + kthread_init_work(&port->vdm_state_machine, vdm_state_machine_work); + kthread_init_work(&port->event_work, tcpm_pd_event_handler); + kthread_init_work(&port->enable_frs, tcpm_enable_frs_work); + kthread_init_work(&port->send_discover_work, tcpm_send_discover_work); + hrtimer_init(&port->state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + port->state_machine_timer.function = state_machine_timer_handler; + hrtimer_init(&port->vdm_state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + port->vdm_state_machine_timer.function = vdm_state_machine_timer_handler; + hrtimer_init(&port->enable_frs_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + port->enable_frs_timer.function = enable_frs_timer_handler; + hrtimer_init(&port->send_discover_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + port->send_discover_timer.function = send_discover_timer_handler; + + spin_lock_init(&port->pd_event_lock); + + init_completion(&port->tx_complete); + init_completion(&port->swap_complete); + init_completion(&port->pps_complete); + tcpm_debugfs_init(port); + + err = tcpm_fw_get_caps(port, tcpc->fwnode); + if (err < 0) + goto out_destroy_wq; + + port->try_role = port->typec_caps.prefer_role; + + port->typec_caps.fwnode = tcpc->fwnode; + port->typec_caps.revision = 0x0120; /* Type-C spec release 1.2 */ + port->typec_caps.pd_revision = 0x0300; /* USB-PD spec release 3.0 */ + port->typec_caps.svdm_version = SVDM_VER_2_0; + port->typec_caps.driver_data = port; + port->typec_caps.ops = &tcpm_ops; + port->typec_caps.orientation_aware = 1; + + port->partner_desc.identity = &port->partner_ident; + port->port_type = port->typec_caps.type; + + port->role_sw = usb_role_switch_get(port->dev); + if (!port->role_sw) + port->role_sw = fwnode_usb_role_switch_get(tcpc->fwnode); + if (IS_ERR(port->role_sw)) { + err = PTR_ERR(port->role_sw); + goto out_destroy_wq; + } + + err = devm_tcpm_psy_register(port); + if (err) + goto out_role_sw_put; + power_supply_changed(port->psy); + + err = tcpm_port_register_pd(port); + if (err) + goto out_role_sw_put; + + port->typec_caps.pd = port->pd; + + port->typec_port = typec_register_port(port->dev, &port->typec_caps); + if (IS_ERR(port->typec_port)) { + err = PTR_ERR(port->typec_port); + goto out_unregister_pd; + } + + typec_port_register_altmodes(port->typec_port, + &tcpm_altmode_ops, port, + port->port_altmode, ALTMODE_DISCOVERY_MAX); + port->registered = true; + + mutex_lock(&port->lock); + tcpm_init(port); + mutex_unlock(&port->lock); + + tcpm_log(port, "%s: registered", dev_name(dev)); + return port; + +out_unregister_pd: + tcpm_port_unregister_pd(port); +out_role_sw_put: + usb_role_switch_put(port->role_sw); +out_destroy_wq: + tcpm_debugfs_exit(port); + kthread_destroy_worker(port->wq); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(tcpm_register_port); + +void tcpm_unregister_port(struct tcpm_port *port) +{ + int i; + + port->registered = false; + kthread_destroy_worker(port->wq); + + hrtimer_cancel(&port->send_discover_timer); + hrtimer_cancel(&port->enable_frs_timer); + hrtimer_cancel(&port->vdm_state_machine_timer); + hrtimer_cancel(&port->state_machine_timer); + + tcpm_reset_port(port); + + tcpm_port_unregister_pd(port); + + for (i = 0; i < ARRAY_SIZE(port->port_altmode); i++) + typec_unregister_altmode(port->port_altmode[i]); + typec_unregister_port(port->typec_port); + usb_role_switch_put(port->role_sw); + tcpm_debugfs_exit(port); +} +EXPORT_SYMBOL_GPL(tcpm_unregister_port); + +MODULE_AUTHOR("Guenter Roeck <groeck@chromium.org>"); +MODULE_DESCRIPTION("USB Type-C Port Manager"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c new file mode 100644 index 0000000000..87d4abde0e --- /dev/null +++ b/drivers/usb/typec/tcpm/wcove.c @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * typec_wcove.c - WhiskeyCove PMIC USB Type-C PHY driver + * + * Copyright (C) 2017 Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/usb/tcpm.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/mfd/intel_soc_pmic.h> + +/* Register offsets */ +#define WCOVE_CHGRIRQ0 0x4e09 + +#define USBC_CONTROL1 0x7001 +#define USBC_CONTROL2 0x7002 +#define USBC_CONTROL3 0x7003 +#define USBC_CC1_CTRL 0x7004 +#define USBC_CC2_CTRL 0x7005 +#define USBC_STATUS1 0x7007 +#define USBC_STATUS2 0x7008 +#define USBC_STATUS3 0x7009 +#define USBC_CC1 0x700a +#define USBC_CC2 0x700b +#define USBC_CC1_STATUS 0x700c +#define USBC_CC2_STATUS 0x700d +#define USBC_IRQ1 0x7015 +#define USBC_IRQ2 0x7016 +#define USBC_IRQMASK1 0x7017 +#define USBC_IRQMASK2 0x7018 +#define USBC_PDCFG2 0x701a +#define USBC_PDCFG3 0x701b +#define USBC_PDSTATUS 0x701c +#define USBC_RXSTATUS 0x701d +#define USBC_RXINFO 0x701e +#define USBC_TXCMD 0x701f +#define USBC_TXINFO 0x7020 +#define USBC_RX_DATA 0x7028 +#define USBC_TX_DATA 0x7047 + +/* Register bits */ + +#define USBC_CONTROL1_MODE_MASK 0x3 +#define USBC_CONTROL1_MODE_SNK 0 +#define USBC_CONTROL1_MODE_SNKACC 1 +#define USBC_CONTROL1_MODE_SRC 2 +#define USBC_CONTROL1_MODE_SRCACC 3 +#define USBC_CONTROL1_MODE_DRP 4 +#define USBC_CONTROL1_MODE_DRPACC 5 +#define USBC_CONTROL1_MODE_TEST 7 +#define USBC_CONTROL1_CURSRC_MASK 0xc +#define USBC_CONTROL1_CURSRC_UA_0 (0 << 3) +#define USBC_CONTROL1_CURSRC_UA_80 (1 << 3) +#define USBC_CONTROL1_CURSRC_UA_180 (2 << 3) +#define USBC_CONTROL1_CURSRC_UA_330 (3 << 3) +#define USBC_CONTROL1_DRPTOGGLE_RANDOM 0xe0 + +#define USBC_CONTROL2_UNATT_SNK BIT(0) +#define USBC_CONTROL2_UNATT_SRC BIT(1) +#define USBC_CONTROL2_DIS_ST BIT(2) + +#define USBC_CONTROL3_DET_DIS BIT(0) +#define USBC_CONTROL3_PD_DIS BIT(1) +#define USBC_CONTROL3_RESETPHY BIT(2) + +#define USBC_CC_CTRL_PU_EN BIT(0) +#define USBC_CC_CTRL_VCONN_EN BIT(1) +#define USBC_CC_CTRL_TX_EN BIT(2) +#define USBC_CC_CTRL_PD_EN BIT(3) +#define USBC_CC_CTRL_CDET_EN BIT(4) +#define USBC_CC_CTRL_RDET_EN BIT(5) +#define USBC_CC_CTRL_ADC_EN BIT(6) +#define USBC_CC_CTRL_VBUSOK BIT(7) + +#define USBC_STATUS1_DET_ONGOING BIT(6) +#define USBC_STATUS1_RSLT(r) ((r) & 0xf) +#define USBC_RSLT_NOTHING 0 +#define USBC_RSLT_SRC_DEFAULT 1 +#define USBC_RSLT_SRC_1_5A 2 +#define USBC_RSLT_SRC_3_0A 3 +#define USBC_RSLT_SNK 4 +#define USBC_RSLT_DEBUG_ACC 5 +#define USBC_RSLT_AUDIO_ACC 6 +#define USBC_RSLT_UNDEF 15 +#define USBC_STATUS1_ORIENT(r) (((r) >> 4) & 0x3) +#define USBC_ORIENT_NORMAL 1 +#define USBC_ORIENT_REVERSE 2 + +#define USBC_STATUS2_VBUS_REQ BIT(5) + +#define UCSC_CC_STATUS_SNK_RP BIT(0) +#define UCSC_CC_STATUS_PWRDEFSNK BIT(1) +#define UCSC_CC_STATUS_PWR_1P5A_SNK BIT(2) +#define UCSC_CC_STATUS_PWR_3A_SNK BIT(3) +#define UCSC_CC_STATUS_SRC_RP BIT(4) +#define UCSC_CC_STATUS_RX(r) (((r) >> 5) & 0x3) +#define USBC_CC_STATUS_RD 1 +#define USBC_CC_STATUS_RA 2 + +#define USBC_IRQ1_ADCDONE1 BIT(2) +#define USBC_IRQ1_OVERTEMP BIT(1) +#define USBC_IRQ1_SHORT BIT(0) + +#define USBC_IRQ2_CC_CHANGE BIT(7) +#define USBC_IRQ2_RX_PD BIT(6) +#define USBC_IRQ2_RX_HR BIT(5) +#define USBC_IRQ2_RX_CR BIT(4) +#define USBC_IRQ2_TX_SUCCESS BIT(3) +#define USBC_IRQ2_TX_FAIL BIT(2) + +#define USBC_IRQMASK1_ALL (USBC_IRQ1_ADCDONE1 | USBC_IRQ1_OVERTEMP | \ + USBC_IRQ1_SHORT) + +#define USBC_IRQMASK2_ALL (USBC_IRQ2_CC_CHANGE | USBC_IRQ2_RX_PD | \ + USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \ + USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL) + +#define USBC_PDCFG2_SOP BIT(0) +#define USBC_PDCFG2_SOP_P BIT(1) +#define USBC_PDCFG2_SOP_PP BIT(2) +#define USBC_PDCFG2_SOP_P_DEBUG BIT(3) +#define USBC_PDCFG2_SOP_PP_DEBUG BIT(4) + +#define USBC_PDCFG3_DATAROLE_SHIFT 1 +#define USBC_PDCFG3_SOP_SHIFT 2 + +#define USBC_RXSTATUS_RXCLEAR BIT(0) +#define USBC_RXSTATUS_RXDATA BIT(7) + +#define USBC_RXINFO_RXBYTES(i) (((i) >> 3) & 0x1f) + +#define USBC_TXCMD_BUF_RDY BIT(0) +#define USBC_TXCMD_START BIT(1) +#define USBC_TXCMD_NOP (0 << 5) +#define USBC_TXCMD_MSG (1 << 5) +#define USBC_TXCMD_CR (2 << 5) +#define USBC_TXCMD_HR (3 << 5) +#define USBC_TXCMD_BIST (4 << 5) + +#define USBC_TXINFO_RETRIES(d) (d << 3) + +struct wcove_typec { + struct mutex lock; /* device lock */ + struct device *dev; + struct regmap *regmap; + guid_t guid; + + bool vbus; + + struct tcpc_dev tcpc; + struct tcpm_port *tcpm; +}; + +#define tcpc_to_wcove(_tcpc_) container_of(_tcpc_, struct wcove_typec, tcpc) + +enum wcove_typec_func { + WCOVE_FUNC_DRIVE_VBUS = 1, + WCOVE_FUNC_ORIENTATION, + WCOVE_FUNC_ROLE, + WCOVE_FUNC_DRIVE_VCONN, +}; + +enum wcove_typec_orientation { + WCOVE_ORIENTATION_NORMAL, + WCOVE_ORIENTATION_REVERSE, +}; + +enum wcove_typec_role { + WCOVE_ROLE_HOST, + WCOVE_ROLE_DEVICE, +}; + +#define WCOVE_DSM_UUID "482383f0-2876-4e49-8685-db66211af037" + +static int wcove_typec_func(struct wcove_typec *wcove, + enum wcove_typec_func func, int param) +{ + union acpi_object *obj; + union acpi_object tmp; + union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp); + + tmp.type = ACPI_TYPE_INTEGER; + tmp.integer.value = param; + + obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), &wcove->guid, 1, func, + &argv4); + if (!obj) { + dev_err(wcove->dev, "%s: failed to evaluate _DSM\n", __func__); + return -EIO; + } + + ACPI_FREE(obj); + return 0; +} + +static int wcove_init(struct tcpc_dev *tcpc) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + int ret; + + ret = regmap_write(wcove->regmap, USBC_CONTROL1, 0); + if (ret) + return ret; + + /* Unmask everything */ + ret = regmap_write(wcove->regmap, USBC_IRQMASK1, 0); + if (ret) + return ret; + + return regmap_write(wcove->regmap, USBC_IRQMASK2, 0); +} + +static int wcove_get_vbus(struct tcpc_dev *tcpc) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + unsigned int cc1ctrl; + int ret; + + ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1ctrl); + if (ret) + return ret; + + wcove->vbus = !!(cc1ctrl & USBC_CC_CTRL_VBUSOK); + + return wcove->vbus; +} + +static int wcove_set_vbus(struct tcpc_dev *tcpc, bool on, bool sink) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + + return wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS, on); +} + +static int wcove_set_vconn(struct tcpc_dev *tcpc, bool on) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + + return wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, on); +} + +static enum typec_cc_status wcove_to_typec_cc(unsigned int cc) +{ + if (cc & UCSC_CC_STATUS_SNK_RP) { + if (cc & UCSC_CC_STATUS_PWRDEFSNK) + return TYPEC_CC_RP_DEF; + else if (cc & UCSC_CC_STATUS_PWR_1P5A_SNK) + return TYPEC_CC_RP_1_5; + else if (cc & UCSC_CC_STATUS_PWR_3A_SNK) + return TYPEC_CC_RP_3_0; + } else { + switch (UCSC_CC_STATUS_RX(cc)) { + case USBC_CC_STATUS_RD: + return TYPEC_CC_RD; + case USBC_CC_STATUS_RA: + return TYPEC_CC_RA; + default: + break; + } + } + return TYPEC_CC_OPEN; +} + +static int wcove_get_cc(struct tcpc_dev *tcpc, enum typec_cc_status *cc1, + enum typec_cc_status *cc2) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + unsigned int cc1_status; + unsigned int cc2_status; + int ret; + + ret = regmap_read(wcove->regmap, USBC_CC1_STATUS, &cc1_status); + if (ret) + return ret; + + ret = regmap_read(wcove->regmap, USBC_CC2_STATUS, &cc2_status); + if (ret) + return ret; + + *cc1 = wcove_to_typec_cc(cc1_status); + *cc2 = wcove_to_typec_cc(cc2_status); + + return 0; +} + +static int wcove_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + unsigned int ctrl; + + switch (cc) { + case TYPEC_CC_RD: + ctrl = USBC_CONTROL1_MODE_SNK; + break; + case TYPEC_CC_RP_DEF: + ctrl = USBC_CONTROL1_CURSRC_UA_80 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_RP_1_5: + ctrl = USBC_CONTROL1_CURSRC_UA_180 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_RP_3_0: + ctrl = USBC_CONTROL1_CURSRC_UA_330 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_OPEN: + ctrl = 0; + break; + default: + return -EINVAL; + } + + return regmap_write(wcove->regmap, USBC_CONTROL1, ctrl); +} + +static int wcove_set_polarity(struct tcpc_dev *tcpc, enum typec_cc_polarity pol) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + + return wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION, pol); +} + +static int wcove_set_current_limit(struct tcpc_dev *tcpc, u32 max_ma, u32 mv) +{ + return 0; +} + +static int wcove_set_roles(struct tcpc_dev *tcpc, bool attached, + enum typec_role role, enum typec_data_role data) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + unsigned int val; + int ret; + + ret = wcove_typec_func(wcove, WCOVE_FUNC_ROLE, data == TYPEC_HOST ? + WCOVE_ROLE_HOST : WCOVE_ROLE_DEVICE); + if (ret) + return ret; + + val = role; + val |= data << USBC_PDCFG3_DATAROLE_SHIFT; + val |= PD_REV20 << USBC_PDCFG3_SOP_SHIFT; + + return regmap_write(wcove->regmap, USBC_PDCFG3, val); +} + +static int wcove_set_pd_rx(struct tcpc_dev *tcpc, bool on) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + + return regmap_write(wcove->regmap, USBC_PDCFG2, + on ? USBC_PDCFG2_SOP : 0); +} + +static int wcove_pd_transmit(struct tcpc_dev *tcpc, + enum tcpm_transmit_type type, + const struct pd_message *msg, + unsigned int negotiated_rev) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + unsigned int info = 0; + unsigned int cmd; + int ret; + + ret = regmap_read(wcove->regmap, USBC_TXCMD, &cmd); + if (ret) + return ret; + + if (!(cmd & USBC_TXCMD_BUF_RDY)) { + dev_warn(wcove->dev, "%s: Last transmission still ongoing!", + __func__); + return -EBUSY; + } + + if (msg) { + const u8 *data = (void *)msg; + int i; + + for (i = 0; i < pd_header_cnt_le(msg->header) * 4 + 2; i++) { + ret = regmap_write(wcove->regmap, USBC_TX_DATA + i, + data[i]); + if (ret) + return ret; + } + } + + switch (type) { + case TCPC_TX_SOP: + case TCPC_TX_SOP_PRIME: + case TCPC_TX_SOP_PRIME_PRIME: + case TCPC_TX_SOP_DEBUG_PRIME: + case TCPC_TX_SOP_DEBUG_PRIME_PRIME: + info = type + 1; + cmd = USBC_TXCMD_MSG; + break; + case TCPC_TX_HARD_RESET: + cmd = USBC_TXCMD_HR; + break; + case TCPC_TX_CABLE_RESET: + cmd = USBC_TXCMD_CR; + break; + case TCPC_TX_BIST_MODE_2: + cmd = USBC_TXCMD_BIST; + break; + default: + return -EINVAL; + } + + /* NOTE Setting maximum number of retries (7) */ + ret = regmap_write(wcove->regmap, USBC_TXINFO, + info | USBC_TXINFO_RETRIES(7)); + if (ret) + return ret; + + return regmap_write(wcove->regmap, USBC_TXCMD, cmd | USBC_TXCMD_START); +} + +static int wcove_start_toggling(struct tcpc_dev *tcpc, + enum typec_port_type port_type, + enum typec_cc_status cc) +{ + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + unsigned int usbc_ctrl; + + if (port_type != TYPEC_PORT_DRP) + return -EOPNOTSUPP; + + usbc_ctrl = USBC_CONTROL1_MODE_DRP | USBC_CONTROL1_DRPTOGGLE_RANDOM; + + switch (cc) { + case TYPEC_CC_RP_1_5: + usbc_ctrl |= USBC_CONTROL1_CURSRC_UA_180; + break; + case TYPEC_CC_RP_3_0: + usbc_ctrl |= USBC_CONTROL1_CURSRC_UA_330; + break; + default: + usbc_ctrl |= USBC_CONTROL1_CURSRC_UA_80; + break; + } + + return regmap_write(wcove->regmap, USBC_CONTROL1, usbc_ctrl); +} + +static int wcove_read_rx_buffer(struct wcove_typec *wcove, void *msg) +{ + unsigned int info; + int ret; + int i; + + ret = regmap_read(wcove->regmap, USBC_RXINFO, &info); + if (ret) + return ret; + + /* FIXME: Check that USBC_RXINFO_RXBYTES(info) matches the header */ + + for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) { + ret = regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); + if (ret) + return ret; + } + + return regmap_write(wcove->regmap, USBC_RXSTATUS, + USBC_RXSTATUS_RXCLEAR); +} + +static irqreturn_t wcove_typec_irq(int irq, void *data) +{ + struct wcove_typec *wcove = data; + unsigned int usbc_irq1 = 0; + unsigned int usbc_irq2 = 0; + unsigned int cc1ctrl; + int ret; + + mutex_lock(&wcove->lock); + + /* Read.. */ + ret = regmap_read(wcove->regmap, USBC_IRQ1, &usbc_irq1); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_IRQ2, &usbc_irq2); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1ctrl); + if (ret) + goto err; + + if (!wcove->tcpm) + goto err; + + /* ..check.. */ + if (usbc_irq1 & USBC_IRQ1_OVERTEMP) { + dev_err(wcove->dev, "VCONN Switch Over Temperature!\n"); + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false); + /* REVISIT: Report an error? */ + } + + if (usbc_irq1 & USBC_IRQ1_SHORT) { + dev_err(wcove->dev, "VCONN Switch Short Circuit!\n"); + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false); + /* REVISIT: Report an error? */ + } + + if (wcove->vbus != !!(cc1ctrl & USBC_CC_CTRL_VBUSOK)) + tcpm_vbus_change(wcove->tcpm); + + /* REVISIT: See if tcpm code can be made to consider Type-C HW FSMs */ + if (usbc_irq2 & USBC_IRQ2_CC_CHANGE) + tcpm_cc_change(wcove->tcpm); + + if (usbc_irq2 & USBC_IRQ2_RX_PD) { + unsigned int status; + + /* + * FIXME: Need to check if TX is ongoing and report + * TX_DIREGARDED if needed? + */ + + ret = regmap_read(wcove->regmap, USBC_RXSTATUS, &status); + if (ret) + goto err; + + /* Flush all buffers */ + while (status & USBC_RXSTATUS_RXDATA) { + struct pd_message msg; + + ret = wcove_read_rx_buffer(wcove, &msg); + if (ret) { + dev_err(wcove->dev, "%s: RX read failed\n", + __func__); + goto err; + } + + tcpm_pd_receive(wcove->tcpm, &msg); + + ret = regmap_read(wcove->regmap, USBC_RXSTATUS, + &status); + if (ret) + goto err; + } + } + + if (usbc_irq2 & USBC_IRQ2_RX_HR) + tcpm_pd_hard_reset(wcove->tcpm); + + /* REVISIT: if (usbc_irq2 & USBC_IRQ2_RX_CR) */ + + if (usbc_irq2 & USBC_IRQ2_TX_SUCCESS) + tcpm_pd_transmit_complete(wcove->tcpm, TCPC_TX_SUCCESS); + + if (usbc_irq2 & USBC_IRQ2_TX_FAIL) + tcpm_pd_transmit_complete(wcove->tcpm, TCPC_TX_FAILED); + +err: + /* ..and clear. */ + if (usbc_irq1) { + ret = regmap_write(wcove->regmap, USBC_IRQ1, usbc_irq1); + if (ret) + dev_WARN(wcove->dev, "%s failed to clear IRQ1\n", + __func__); + } + + if (usbc_irq2) { + ret = regmap_write(wcove->regmap, USBC_IRQ2, usbc_irq2); + if (ret) + dev_WARN(wcove->dev, "%s failed to clear IRQ2\n", + __func__); + } + + /* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */ + regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5)); + + mutex_unlock(&wcove->lock); + return IRQ_HANDLED; +} + +/* + * The following power levels should be safe to use with Joule board. + */ +static const u32 src_pdo[] = { + PDO_FIXED(5000, 1500, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | + PDO_FIXED_USB_COMM), +}; + +static const u32 snk_pdo[] = { + PDO_FIXED(5000, 500, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | + PDO_FIXED_USB_COMM), + PDO_VAR(5000, 12000, 3000), +}; + +static const struct property_entry wcove_props[] = { + PROPERTY_ENTRY_STRING("data-role", "dual"), + PROPERTY_ENTRY_STRING("power-role", "dual"), + PROPERTY_ENTRY_STRING("try-power-role", "sink"), + PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), + PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), + PROPERTY_ENTRY_U32("op-sink-microwatt", 15000000), + { } +}; + +static int wcove_typec_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct wcove_typec *wcove; + int irq; + int ret; + + wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL); + if (!wcove) + return -ENOMEM; + + mutex_init(&wcove->lock); + wcove->dev = &pdev->dev; + wcove->regmap = pmic->regmap; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + irq = regmap_irq_get_virq(pmic->irq_chip_data_chgr, irq); + if (irq < 0) + return irq; + + ret = guid_parse(WCOVE_DSM_UUID, &wcove->guid); + if (ret) + return ret; + + if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), &wcove->guid, 0, 0x1f)) { + dev_err(&pdev->dev, "Missing _DSM functions\n"); + return -ENODEV; + } + + wcove->tcpc.init = wcove_init; + wcove->tcpc.get_vbus = wcove_get_vbus; + wcove->tcpc.set_vbus = wcove_set_vbus; + wcove->tcpc.set_cc = wcove_set_cc; + wcove->tcpc.get_cc = wcove_get_cc; + wcove->tcpc.set_polarity = wcove_set_polarity; + wcove->tcpc.set_vconn = wcove_set_vconn; + wcove->tcpc.set_current_limit = wcove_set_current_limit; + wcove->tcpc.start_toggling = wcove_start_toggling; + + wcove->tcpc.set_pd_rx = wcove_set_pd_rx; + wcove->tcpc.set_roles = wcove_set_roles; + wcove->tcpc.pd_transmit = wcove_pd_transmit; + + wcove->tcpc.fwnode = fwnode_create_software_node(wcove_props, NULL); + if (IS_ERR(wcove->tcpc.fwnode)) + return PTR_ERR(wcove->tcpc.fwnode); + + wcove->tcpm = tcpm_register_port(wcove->dev, &wcove->tcpc); + if (IS_ERR(wcove->tcpm)) { + fwnode_remove_software_node(wcove->tcpc.fwnode); + return PTR_ERR(wcove->tcpm); + } + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + wcove_typec_irq, IRQF_ONESHOT, + "wcove_typec", wcove); + if (ret) { + tcpm_unregister_port(wcove->tcpm); + fwnode_remove_software_node(wcove->tcpc.fwnode); + return ret; + } + + platform_set_drvdata(pdev, wcove); + return 0; +} + +static void wcove_typec_remove(struct platform_device *pdev) +{ + struct wcove_typec *wcove = platform_get_drvdata(pdev); + unsigned int val; + + /* Mask everything */ + regmap_read(wcove->regmap, USBC_IRQMASK1, &val); + regmap_write(wcove->regmap, USBC_IRQMASK1, val | USBC_IRQMASK1_ALL); + regmap_read(wcove->regmap, USBC_IRQMASK2, &val); + regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL); + + tcpm_unregister_port(wcove->tcpm); + fwnode_remove_software_node(wcove->tcpc.fwnode); +} + +static struct platform_driver wcove_typec_driver = { + .driver = { + .name = "bxt_wcove_usbc", + }, + .probe = wcove_typec_probe, + .remove_new = wcove_typec_remove, +}; + +module_platform_driver(wcove_typec_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("WhiskeyCove PMIC USB Type-C PHY driver"); +MODULE_ALIAS("platform:bxt_wcove_usbc"); diff --git a/drivers/usb/typec/tipd/Kconfig b/drivers/usb/typec/tipd/Kconfig new file mode 100644 index 0000000000..b827152930 --- /dev/null +++ b/drivers/usb/typec/tipd/Kconfig @@ -0,0 +1,12 @@ +config TYPEC_TPS6598X + tristate "TI TPS6598x USB Power Delivery controller driver" + depends on I2C + select POWER_SUPPLY + select REGMAP_I2C + select USB_ROLE_SWITCH + help + Say Y or M here if your system has TI TPS65982 or TPS65983 USB Power + Delivery controller. + + If you choose to build this driver as a dynamically linked module, the + module will be called tps6598x.ko. diff --git a/drivers/usb/typec/tipd/Makefile b/drivers/usb/typec/tipd/Makefile new file mode 100644 index 0000000000..aa439f80a8 --- /dev/null +++ b/drivers/usb/typec/tipd/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +CFLAGS_trace.o := -I$(src) + +obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o +tps6598x-y := core.o +tps6598x-$(CONFIG_TRACING) += trace.o diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c new file mode 100644 index 0000000000..37b56ce75f --- /dev/null +++ b/drivers/usb/typec/tipd/core.c @@ -0,0 +1,961 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for TI TPS6598x USB Power Delivery controller family + * + * Copyright (C) 2017, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/i2c.h> +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/interrupt.h> +#include <linux/usb/typec.h> +#include <linux/usb/typec_altmode.h> +#include <linux/usb/role.h> +#include <linux/workqueue.h> + +#include "tps6598x.h" +#include "trace.h" + +/* Register offsets */ +#define TPS_REG_VID 0x00 +#define TPS_REG_MODE 0x03 +#define TPS_REG_CMD1 0x08 +#define TPS_REG_DATA1 0x09 +#define TPS_REG_INT_EVENT1 0x14 +#define TPS_REG_INT_EVENT2 0x15 +#define TPS_REG_INT_MASK1 0x16 +#define TPS_REG_INT_MASK2 0x17 +#define TPS_REG_INT_CLEAR1 0x18 +#define TPS_REG_INT_CLEAR2 0x19 +#define TPS_REG_SYSTEM_POWER_STATE 0x20 +#define TPS_REG_STATUS 0x1a +#define TPS_REG_SYSTEM_CONF 0x28 +#define TPS_REG_CTRL_CONF 0x29 +#define TPS_REG_POWER_STATUS 0x3f +#define TPS_REG_RX_IDENTITY_SOP 0x48 +#define TPS_REG_DATA_STATUS 0x5f + +/* TPS_REG_SYSTEM_CONF bits */ +#define TPS_SYSCONF_PORTINFO(c) ((c) & 7) + +enum { + TPS_PORTINFO_SINK, + TPS_PORTINFO_SINK_ACCESSORY, + TPS_PORTINFO_DRP_UFP, + TPS_PORTINFO_DRP_UFP_DRD, + TPS_PORTINFO_DRP_DFP, + TPS_PORTINFO_DRP_DFP_DRD, + TPS_PORTINFO_SOURCE, +}; + +/* TPS_REG_RX_IDENTITY_SOP */ +struct tps6598x_rx_identity_reg { + u8 status; + struct usb_pd_identity identity; +} __packed; + +/* Standard Task return codes */ +#define TPS_TASK_TIMEOUT 1 +#define TPS_TASK_REJECTED 3 + +enum { + TPS_MODE_APP, + TPS_MODE_BOOT, + TPS_MODE_BIST, + TPS_MODE_DISC, +}; + +static const char *const modes[] = { + [TPS_MODE_APP] = "APP ", + [TPS_MODE_BOOT] = "BOOT", + [TPS_MODE_BIST] = "BIST", + [TPS_MODE_DISC] = "DISC", +}; + +/* Unrecognized commands will be replaced with "!CMD" */ +#define INVALID_CMD(_cmd_) (_cmd_ == 0x444d4321) + +struct tps6598x { + struct device *dev; + struct regmap *regmap; + struct mutex lock; /* device lock */ + u8 i2c_protocol:1; + + struct typec_port *port; + struct typec_partner *partner; + struct usb_pd_identity partner_identity; + struct usb_role_switch *role_sw; + struct typec_capability typec_cap; + + struct power_supply *psy; + struct power_supply_desc psy_desc; + enum power_supply_usb_type usb_type; + + int wakeup; + u16 pwr_status; + struct delayed_work wq_poll; + irq_handler_t irq_handler; +}; + +static enum power_supply_property tps6598x_psy_props[] = { + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_ONLINE, +}; + +static enum power_supply_usb_type tps6598x_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_C, + POWER_SUPPLY_USB_TYPE_PD, +}; + +static const char *tps6598x_psy_name_prefix = "tps6598x-source-psy-"; + +/* + * Max data bytes for Data1, Data2, and other registers. See ch 1.3.2: + * https://www.ti.com/lit/ug/slvuan1a/slvuan1a.pdf + */ +#define TPS_MAX_LEN 64 + +static int +tps6598x_block_read(struct tps6598x *tps, u8 reg, void *val, size_t len) +{ + u8 data[TPS_MAX_LEN + 1]; + int ret; + + if (len + 1 > sizeof(data)) + return -EINVAL; + + if (!tps->i2c_protocol) + return regmap_raw_read(tps->regmap, reg, val, len); + + ret = regmap_raw_read(tps->regmap, reg, data, len + 1); + if (ret) + return ret; + + if (data[0] < len) + return -EIO; + + memcpy(val, &data[1], len); + return 0; +} + +static int tps6598x_block_write(struct tps6598x *tps, u8 reg, + const void *val, size_t len) +{ + u8 data[TPS_MAX_LEN + 1]; + + if (len + 1 > sizeof(data)) + return -EINVAL; + + if (!tps->i2c_protocol) + return regmap_raw_write(tps->regmap, reg, val, len); + + data[0] = len; + memcpy(&data[1], val, len); + + return regmap_raw_write(tps->regmap, reg, data, len + 1); +} + +static inline int tps6598x_read8(struct tps6598x *tps, u8 reg, u8 *val) +{ + return tps6598x_block_read(tps, reg, val, sizeof(u8)); +} + +static inline int tps6598x_read16(struct tps6598x *tps, u8 reg, u16 *val) +{ + return tps6598x_block_read(tps, reg, val, sizeof(u16)); +} + +static inline int tps6598x_read32(struct tps6598x *tps, u8 reg, u32 *val) +{ + return tps6598x_block_read(tps, reg, val, sizeof(u32)); +} + +static inline int tps6598x_read64(struct tps6598x *tps, u8 reg, u64 *val) +{ + return tps6598x_block_read(tps, reg, val, sizeof(u64)); +} + +static inline int tps6598x_write64(struct tps6598x *tps, u8 reg, u64 val) +{ + return tps6598x_block_write(tps, reg, &val, sizeof(u64)); +} + +static inline int +tps6598x_write_4cc(struct tps6598x *tps, u8 reg, const char *val) +{ + return tps6598x_block_write(tps, reg, val, 4); +} + +static int tps6598x_read_partner_identity(struct tps6598x *tps) +{ + struct tps6598x_rx_identity_reg id; + int ret; + + ret = tps6598x_block_read(tps, TPS_REG_RX_IDENTITY_SOP, + &id, sizeof(id)); + if (ret) + return ret; + + tps->partner_identity = id.identity; + + return 0; +} + +static void tps6598x_set_data_role(struct tps6598x *tps, + enum typec_data_role role, bool connected) +{ + enum usb_role role_val; + + if (role == TYPEC_HOST) + role_val = USB_ROLE_HOST; + else + role_val = USB_ROLE_DEVICE; + + if (!connected) + role_val = USB_ROLE_NONE; + + usb_role_switch_set_role(tps->role_sw, role_val); + typec_set_data_role(tps->port, role); +} + +static int tps6598x_connect(struct tps6598x *tps, u32 status) +{ + struct typec_partner_desc desc; + enum typec_pwr_opmode mode; + int ret; + + if (tps->partner) + return 0; + + mode = TPS_POWER_STATUS_PWROPMODE(tps->pwr_status); + + desc.usb_pd = mode == TYPEC_PWR_MODE_PD; + desc.accessory = TYPEC_ACCESSORY_NONE; /* XXX: handle accessories */ + desc.identity = NULL; + + if (desc.usb_pd) { + ret = tps6598x_read_partner_identity(tps); + if (ret) + return ret; + desc.identity = &tps->partner_identity; + } + + typec_set_pwr_opmode(tps->port, mode); + typec_set_pwr_role(tps->port, TPS_STATUS_TO_TYPEC_PORTROLE(status)); + typec_set_vconn_role(tps->port, TPS_STATUS_TO_TYPEC_VCONN(status)); + if (TPS_STATUS_TO_UPSIDE_DOWN(status)) + typec_set_orientation(tps->port, TYPEC_ORIENTATION_REVERSE); + else + typec_set_orientation(tps->port, TYPEC_ORIENTATION_NORMAL); + typec_set_mode(tps->port, TYPEC_STATE_USB); + tps6598x_set_data_role(tps, TPS_STATUS_TO_TYPEC_DATAROLE(status), true); + + tps->partner = typec_register_partner(tps->port, &desc); + if (IS_ERR(tps->partner)) + return PTR_ERR(tps->partner); + + if (desc.identity) + typec_partner_set_identity(tps->partner); + + power_supply_changed(tps->psy); + + return 0; +} + +static void tps6598x_disconnect(struct tps6598x *tps, u32 status) +{ + if (!IS_ERR(tps->partner)) + typec_unregister_partner(tps->partner); + tps->partner = NULL; + typec_set_pwr_opmode(tps->port, TYPEC_PWR_MODE_USB); + typec_set_pwr_role(tps->port, TPS_STATUS_TO_TYPEC_PORTROLE(status)); + typec_set_vconn_role(tps->port, TPS_STATUS_TO_TYPEC_VCONN(status)); + typec_set_orientation(tps->port, TYPEC_ORIENTATION_NONE); + typec_set_mode(tps->port, TYPEC_STATE_SAFE); + tps6598x_set_data_role(tps, TPS_STATUS_TO_TYPEC_DATAROLE(status), false); + + power_supply_changed(tps->psy); +} + +static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd, + size_t in_len, u8 *in_data, + size_t out_len, u8 *out_data) +{ + unsigned long timeout; + u32 val; + int ret; + + ret = tps6598x_read32(tps, TPS_REG_CMD1, &val); + if (ret) + return ret; + if (val && !INVALID_CMD(val)) + return -EBUSY; + + if (in_len) { + ret = tps6598x_block_write(tps, TPS_REG_DATA1, + in_data, in_len); + if (ret) + return ret; + } + + ret = tps6598x_write_4cc(tps, TPS_REG_CMD1, cmd); + if (ret < 0) + return ret; + + /* XXX: Using 1s for now, but it may not be enough for every command. */ + timeout = jiffies + msecs_to_jiffies(1000); + + do { + ret = tps6598x_read32(tps, TPS_REG_CMD1, &val); + if (ret) + return ret; + if (INVALID_CMD(val)) + return -EINVAL; + + if (time_is_before_jiffies(timeout)) + return -ETIMEDOUT; + } while (val); + + if (out_len) { + ret = tps6598x_block_read(tps, TPS_REG_DATA1, + out_data, out_len); + if (ret) + return ret; + val = out_data[0]; + } else { + ret = tps6598x_block_read(tps, TPS_REG_DATA1, &val, sizeof(u8)); + if (ret) + return ret; + } + + switch (val) { + case TPS_TASK_TIMEOUT: + return -ETIMEDOUT; + case TPS_TASK_REJECTED: + return -EPERM; + default: + break; + } + + return 0; +} + +static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role) +{ + const char *cmd = (role == TYPEC_DEVICE) ? "SWUF" : "SWDF"; + struct tps6598x *tps = typec_get_drvdata(port); + u32 status; + int ret; + + mutex_lock(&tps->lock); + + ret = tps6598x_exec_cmd(tps, cmd, 0, NULL, 0, NULL); + if (ret) + goto out_unlock; + + ret = tps6598x_read32(tps, TPS_REG_STATUS, &status); + if (ret) + goto out_unlock; + + if (role != TPS_STATUS_TO_TYPEC_DATAROLE(status)) { + ret = -EPROTO; + goto out_unlock; + } + + tps6598x_set_data_role(tps, role, true); + +out_unlock: + mutex_unlock(&tps->lock); + + return ret; +} + +static int tps6598x_pr_set(struct typec_port *port, enum typec_role role) +{ + const char *cmd = (role == TYPEC_SINK) ? "SWSk" : "SWSr"; + struct tps6598x *tps = typec_get_drvdata(port); + u32 status; + int ret; + + mutex_lock(&tps->lock); + + ret = tps6598x_exec_cmd(tps, cmd, 0, NULL, 0, NULL); + if (ret) + goto out_unlock; + + ret = tps6598x_read32(tps, TPS_REG_STATUS, &status); + if (ret) + goto out_unlock; + + if (role != TPS_STATUS_TO_TYPEC_PORTROLE(status)) { + ret = -EPROTO; + goto out_unlock; + } + + typec_set_pwr_role(tps->port, role); + +out_unlock: + mutex_unlock(&tps->lock); + + return ret; +} + +static const struct typec_operations tps6598x_ops = { + .dr_set = tps6598x_dr_set, + .pr_set = tps6598x_pr_set, +}; + +static bool tps6598x_read_status(struct tps6598x *tps, u32 *status) +{ + int ret; + + ret = tps6598x_read32(tps, TPS_REG_STATUS, status); + if (ret) { + dev_err(tps->dev, "%s: failed to read status\n", __func__); + return false; + } + trace_tps6598x_status(*status); + + return true; +} + +static bool tps6598x_read_data_status(struct tps6598x *tps) +{ + u32 data_status; + int ret; + + ret = tps6598x_read32(tps, TPS_REG_DATA_STATUS, &data_status); + if (ret < 0) { + dev_err(tps->dev, "failed to read data status: %d\n", ret); + return false; + } + trace_tps6598x_data_status(data_status); + + return true; +} + +static bool tps6598x_read_power_status(struct tps6598x *tps) +{ + u16 pwr_status; + int ret; + + ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &pwr_status); + if (ret < 0) { + dev_err(tps->dev, "failed to read power status: %d\n", ret); + return false; + } + tps->pwr_status = pwr_status; + trace_tps6598x_power_status(pwr_status); + + return true; +} + +static void tps6598x_handle_plug_event(struct tps6598x *tps, u32 status) +{ + int ret; + + if (status & TPS_STATUS_PLUG_PRESENT) { + ret = tps6598x_connect(tps, status); + if (ret) + dev_err(tps->dev, "failed to register partner\n"); + } else { + tps6598x_disconnect(tps, status); + } +} + +static irqreturn_t cd321x_interrupt(int irq, void *data) +{ + struct tps6598x *tps = data; + u64 event = 0; + u32 status; + int ret; + + mutex_lock(&tps->lock); + + ret = tps6598x_read64(tps, TPS_REG_INT_EVENT1, &event); + if (ret) { + dev_err(tps->dev, "%s: failed to read events\n", __func__); + goto err_unlock; + } + trace_cd321x_irq(event); + + if (!event) + goto err_unlock; + + if (!tps6598x_read_status(tps, &status)) + goto err_clear_ints; + + if (event & APPLE_CD_REG_INT_POWER_STATUS_UPDATE) + if (!tps6598x_read_power_status(tps)) + goto err_clear_ints; + + if (event & APPLE_CD_REG_INT_DATA_STATUS_UPDATE) + if (!tps6598x_read_data_status(tps)) + goto err_clear_ints; + + /* Handle plug insert or removal */ + if (event & APPLE_CD_REG_INT_PLUG_EVENT) + tps6598x_handle_plug_event(tps, status); + +err_clear_ints: + tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event); + +err_unlock: + mutex_unlock(&tps->lock); + + if (event) + return IRQ_HANDLED; + return IRQ_NONE; +} + +static irqreturn_t tps6598x_interrupt(int irq, void *data) +{ + struct tps6598x *tps = data; + u64 event1 = 0; + u64 event2 = 0; + u32 status; + int ret; + + mutex_lock(&tps->lock); + + ret = tps6598x_read64(tps, TPS_REG_INT_EVENT1, &event1); + ret |= tps6598x_read64(tps, TPS_REG_INT_EVENT2, &event2); + if (ret) { + dev_err(tps->dev, "%s: failed to read events\n", __func__); + goto err_unlock; + } + trace_tps6598x_irq(event1, event2); + + if (!(event1 | event2)) + goto err_unlock; + + if (!tps6598x_read_status(tps, &status)) + goto err_clear_ints; + + if ((event1 | event2) & TPS_REG_INT_POWER_STATUS_UPDATE) + if (!tps6598x_read_power_status(tps)) + goto err_clear_ints; + + if ((event1 | event2) & TPS_REG_INT_DATA_STATUS_UPDATE) + if (!tps6598x_read_data_status(tps)) + goto err_clear_ints; + + /* Handle plug insert or removal */ + if ((event1 | event2) & TPS_REG_INT_PLUG_EVENT) + tps6598x_handle_plug_event(tps, status); + +err_clear_ints: + tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event1); + tps6598x_write64(tps, TPS_REG_INT_CLEAR2, event2); + +err_unlock: + mutex_unlock(&tps->lock); + + if (event1 | event2) + return IRQ_HANDLED; + return IRQ_NONE; +} + +/* Time interval for Polling */ +#define POLL_INTERVAL 500 /* msecs */ +static void tps6598x_poll_work(struct work_struct *work) +{ + struct tps6598x *tps = container_of(to_delayed_work(work), + struct tps6598x, wq_poll); + + tps->irq_handler(0, tps); + queue_delayed_work(system_power_efficient_wq, + &tps->wq_poll, msecs_to_jiffies(POLL_INTERVAL)); +} + +static int tps6598x_check_mode(struct tps6598x *tps) +{ + char mode[5] = { }; + int ret; + + ret = tps6598x_read32(tps, TPS_REG_MODE, (void *)mode); + if (ret) + return ret; + + switch (match_string(modes, ARRAY_SIZE(modes), mode)) { + case TPS_MODE_APP: + return 0; + case TPS_MODE_BOOT: + dev_warn(tps->dev, "dead-battery condition\n"); + return 0; + case TPS_MODE_BIST: + case TPS_MODE_DISC: + default: + dev_err(tps->dev, "controller in unsupported mode \"%s\"\n", + mode); + break; + } + + return -ENODEV; +} + +static const struct regmap_config tps6598x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x7F, +}; + +static int tps6598x_psy_get_online(struct tps6598x *tps, + union power_supply_propval *val) +{ + if (TPS_POWER_STATUS_CONNECTION(tps->pwr_status) && + TPS_POWER_STATUS_SOURCESINK(tps->pwr_status)) { + val->intval = 1; + } else { + val->intval = 0; + } + return 0; +} + +static int tps6598x_psy_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct tps6598x *tps = power_supply_get_drvdata(psy); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_USB_TYPE: + if (TPS_POWER_STATUS_PWROPMODE(tps->pwr_status) == TYPEC_PWR_MODE_PD) + val->intval = POWER_SUPPLY_USB_TYPE_PD; + else + val->intval = POWER_SUPPLY_USB_TYPE_C; + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = tps6598x_psy_get_online(tps, val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int cd321x_switch_power_state(struct tps6598x *tps, u8 target_state) +{ + u8 state; + int ret; + + ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state); + if (ret) + return ret; + + if (state == target_state) + return 0; + + ret = tps6598x_exec_cmd(tps, "SSPS", sizeof(u8), &target_state, 0, NULL); + if (ret) + return ret; + + ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state); + if (ret) + return ret; + + if (state != target_state) + return -EINVAL; + + return 0; +} + +static int devm_tps6598_psy_register(struct tps6598x *tps) +{ + struct power_supply_config psy_cfg = {}; + const char *port_dev_name = dev_name(tps->dev); + char *psy_name; + + psy_cfg.drv_data = tps; + psy_cfg.fwnode = dev_fwnode(tps->dev); + + psy_name = devm_kasprintf(tps->dev, GFP_KERNEL, "%s%s", tps6598x_psy_name_prefix, + port_dev_name); + if (!psy_name) + return -ENOMEM; + + tps->psy_desc.name = psy_name; + tps->psy_desc.type = POWER_SUPPLY_TYPE_USB; + tps->psy_desc.usb_types = tps6598x_psy_usb_types; + tps->psy_desc.num_usb_types = ARRAY_SIZE(tps6598x_psy_usb_types); + tps->psy_desc.properties = tps6598x_psy_props; + tps->psy_desc.num_properties = ARRAY_SIZE(tps6598x_psy_props); + tps->psy_desc.get_property = tps6598x_psy_get_prop; + + tps->usb_type = POWER_SUPPLY_USB_TYPE_C; + + tps->psy = devm_power_supply_register(tps->dev, &tps->psy_desc, + &psy_cfg); + return PTR_ERR_OR_ZERO(tps->psy); +} + +static int tps6598x_probe(struct i2c_client *client) +{ + irq_handler_t irq_handler = tps6598x_interrupt; + struct device_node *np = client->dev.of_node; + struct typec_capability typec_cap = { }; + struct tps6598x *tps; + struct fwnode_handle *fwnode; + u32 status; + u32 conf; + u32 vid; + int ret; + u64 mask1; + + tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + mutex_init(&tps->lock); + tps->dev = &client->dev; + + tps->regmap = devm_regmap_init_i2c(client, &tps6598x_regmap_config); + if (IS_ERR(tps->regmap)) + return PTR_ERR(tps->regmap); + + ret = tps6598x_read32(tps, TPS_REG_VID, &vid); + if (ret < 0 || !vid) + return -ENODEV; + + /* + * Checking can the adapter handle SMBus protocol. If it can not, the + * driver needs to take care of block reads separately. + */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + tps->i2c_protocol = true; + + if (np && of_device_is_compatible(np, "apple,cd321x")) { + /* Switch CD321X chips to the correct system power state */ + ret = cd321x_switch_power_state(tps, TPS_SYSTEM_POWER_STATE_S0); + if (ret) + return ret; + + /* CD321X chips have all interrupts masked initially */ + mask1 = APPLE_CD_REG_INT_POWER_STATUS_UPDATE | + APPLE_CD_REG_INT_DATA_STATUS_UPDATE | + APPLE_CD_REG_INT_PLUG_EVENT; + + irq_handler = cd321x_interrupt; + } else { + /* Enable power status, data status and plug event interrupts */ + mask1 = TPS_REG_INT_POWER_STATUS_UPDATE | + TPS_REG_INT_DATA_STATUS_UPDATE | + TPS_REG_INT_PLUG_EVENT; + } + + tps->irq_handler = irq_handler; + /* Make sure the controller has application firmware running */ + ret = tps6598x_check_mode(tps); + if (ret) + return ret; + + ret = tps6598x_write64(tps, TPS_REG_INT_MASK1, mask1); + if (ret) + return ret; + + ret = tps6598x_read32(tps, TPS_REG_STATUS, &status); + if (ret < 0) + goto err_clear_mask; + trace_tps6598x_status(status); + + ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf); + if (ret < 0) + goto err_clear_mask; + + /* + * This fwnode has a "compatible" property, but is never populated as a + * struct device. Instead we simply parse it to read the properties. + * This breaks fw_devlink=on. To maintain backward compatibility + * with existing DT files, we work around this by deleting any + * fwnode_links to/from this fwnode. + */ + fwnode = device_get_named_child_node(&client->dev, "connector"); + if (fwnode) + fw_devlink_purge_absent_suppliers(fwnode); + + tps->role_sw = fwnode_usb_role_switch_get(fwnode); + if (IS_ERR(tps->role_sw)) { + ret = PTR_ERR(tps->role_sw); + goto err_fwnode_put; + } + + typec_cap.revision = USB_TYPEC_REV_1_2; + typec_cap.pd_revision = 0x200; + typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + typec_cap.driver_data = tps; + typec_cap.ops = &tps6598x_ops; + typec_cap.fwnode = fwnode; + + switch (TPS_SYSCONF_PORTINFO(conf)) { + case TPS_PORTINFO_SINK_ACCESSORY: + case TPS_PORTINFO_SINK: + typec_cap.type = TYPEC_PORT_SNK; + typec_cap.data = TYPEC_PORT_UFP; + break; + case TPS_PORTINFO_DRP_UFP_DRD: + case TPS_PORTINFO_DRP_DFP_DRD: + typec_cap.type = TYPEC_PORT_DRP; + typec_cap.data = TYPEC_PORT_DRD; + break; + case TPS_PORTINFO_DRP_UFP: + typec_cap.type = TYPEC_PORT_DRP; + typec_cap.data = TYPEC_PORT_UFP; + break; + case TPS_PORTINFO_DRP_DFP: + typec_cap.type = TYPEC_PORT_DRP; + typec_cap.data = TYPEC_PORT_DFP; + break; + case TPS_PORTINFO_SOURCE: + typec_cap.type = TYPEC_PORT_SRC; + typec_cap.data = TYPEC_PORT_DFP; + break; + default: + ret = -ENODEV; + goto err_role_put; + } + + ret = devm_tps6598_psy_register(tps); + if (ret) + goto err_role_put; + + tps->port = typec_register_port(&client->dev, &typec_cap); + if (IS_ERR(tps->port)) { + ret = PTR_ERR(tps->port); + goto err_role_put; + } + + if (status & TPS_STATUS_PLUG_PRESENT) { + ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &tps->pwr_status); + if (ret < 0) { + dev_err(tps->dev, "failed to read power status: %d\n", ret); + goto err_unregister_port; + } + ret = tps6598x_connect(tps, status); + if (ret) + dev_err(&client->dev, "failed to register partner\n"); + } + + if (client->irq) { + ret = devm_request_threaded_irq(&client->dev, client->irq, NULL, + irq_handler, + IRQF_SHARED | IRQF_ONESHOT, + dev_name(&client->dev), tps); + } else { + dev_warn(tps->dev, "Unable to find the interrupt, switching to polling\n"); + INIT_DELAYED_WORK(&tps->wq_poll, tps6598x_poll_work); + queue_delayed_work(system_power_efficient_wq, &tps->wq_poll, + msecs_to_jiffies(POLL_INTERVAL)); + } + + if (ret) + goto err_disconnect; + + i2c_set_clientdata(client, tps); + fwnode_handle_put(fwnode); + + tps->wakeup = device_property_read_bool(tps->dev, "wakeup-source"); + if (tps->wakeup && client->irq) { + device_init_wakeup(&client->dev, true); + enable_irq_wake(client->irq); + } + + return 0; + +err_disconnect: + tps6598x_disconnect(tps, 0); +err_unregister_port: + typec_unregister_port(tps->port); +err_role_put: + usb_role_switch_put(tps->role_sw); +err_fwnode_put: + fwnode_handle_put(fwnode); +err_clear_mask: + tps6598x_write64(tps, TPS_REG_INT_MASK1, 0); + return ret; +} + +static void tps6598x_remove(struct i2c_client *client) +{ + struct tps6598x *tps = i2c_get_clientdata(client); + + if (!client->irq) + cancel_delayed_work_sync(&tps->wq_poll); + + tps6598x_disconnect(tps, 0); + typec_unregister_port(tps->port); + usb_role_switch_put(tps->role_sw); +} + +static int __maybe_unused tps6598x_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct tps6598x *tps = i2c_get_clientdata(client); + + if (tps->wakeup) { + disable_irq(client->irq); + enable_irq_wake(client->irq); + } + + if (!client->irq) + cancel_delayed_work_sync(&tps->wq_poll); + + return 0; +} + +static int __maybe_unused tps6598x_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct tps6598x *tps = i2c_get_clientdata(client); + + if (tps->wakeup) { + disable_irq_wake(client->irq); + enable_irq(client->irq); + } + + if (!client->irq) + queue_delayed_work(system_power_efficient_wq, &tps->wq_poll, + msecs_to_jiffies(POLL_INTERVAL)); + + return 0; +} + +static const struct dev_pm_ops tps6598x_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tps6598x_suspend, tps6598x_resume) +}; + +static const struct of_device_id tps6598x_of_match[] = { + { .compatible = "ti,tps6598x", }, + { .compatible = "apple,cd321x", }, + {} +}; +MODULE_DEVICE_TABLE(of, tps6598x_of_match); + +static const struct i2c_device_id tps6598x_id[] = { + { "tps6598x" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tps6598x_id); + +static struct i2c_driver tps6598x_i2c_driver = { + .driver = { + .name = "tps6598x", + .pm = &tps6598x_pm_ops, + .of_match_table = tps6598x_of_match, + }, + .probe = tps6598x_probe, + .remove = tps6598x_remove, + .id_table = tps6598x_id, +}; +module_i2c_driver(tps6598x_i2c_driver); + +MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI TPS6598x USB Power Delivery Controller Driver"); diff --git a/drivers/usb/typec/tipd/tps6598x.h b/drivers/usb/typec/tipd/tps6598x.h new file mode 100644 index 0000000000..527857549d --- /dev/null +++ b/drivers/usb/typec/tipd/tps6598x.h @@ -0,0 +1,202 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Driver for TI TPS6598x USB Power Delivery controller family + * + * Copyright (C) 2017, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/bits.h> +#include <linux/bitfield.h> + +#ifndef __TPS6598X_H__ +#define __TPS6598X_H__ + +#define TPS_FIELD_GET(_mask, _reg) ((typeof(_mask))(((_reg) & (_mask)) >> __bf_shf(_mask))) + +/* TPS_REG_STATUS bits */ +#define TPS_STATUS_PLUG_PRESENT BIT(0) +#define TPS_STATUS_PLUG_UPSIDE_DOWN BIT(4) +#define TPS_STATUS_TO_UPSIDE_DOWN(s) (!!((s) & TPS_STATUS_PLUG_UPSIDE_DOWN)) +#define TPS_STATUS_PORTROLE BIT(5) +#define TPS_STATUS_TO_TYPEC_PORTROLE(s) (!!((s) & TPS_STATUS_PORTROLE)) +#define TPS_STATUS_DATAROLE BIT(6) +#define TPS_STATUS_TO_TYPEC_DATAROLE(s) (!!((s) & TPS_STATUS_DATAROLE)) +#define TPS_STATUS_VCONN BIT(7) +#define TPS_STATUS_TO_TYPEC_VCONN(s) (!!((s) & TPS_STATUS_VCONN)) +#define TPS_STATUS_OVERCURRENT BIT(16) +#define TPS_STATUS_GOTO_MIN_ACTIVE BIT(26) +#define TPS_STATUS_BIST BIT(27) +#define TPS_STATUS_HIGH_VOLAGE_WARNING BIT(28) +#define TPS_STATUS_HIGH_LOW_VOLTAGE_WARNING BIT(29) + +#define TPS_STATUS_CONN_STATE_MASK GENMASK(3, 1) +#define TPS_STATUS_CONN_STATE(x) TPS_FIELD_GET(TPS_STATUS_CONN_STATE_MASK, (x)) +#define TPS_STATUS_PP_5V0_SWITCH_MASK GENMASK(9, 8) +#define TPS_STATUS_PP_5V0_SWITCH(x) TPS_FIELD_GET(TPS_STATUS_PP_5V0_SWITCH_MASK, (x)) +#define TPS_STATUS_PP_HV_SWITCH_MASK GENMASK(11, 10) +#define TPS_STATUS_PP_HV_SWITCH(x) TPS_FIELD_GET(TPS_STATUS_PP_HV_SWITCH_MASK, (x)) +#define TPS_STATUS_PP_EXT_SWITCH_MASK GENMASK(13, 12) +#define TPS_STATUS_PP_EXT_SWITCH(x) TPS_FIELD_GET(TPS_STATUS_PP_EXT_SWITCH_MASK, (x)) +#define TPS_STATUS_PP_CABLE_SWITCH_MASK GENMASK(15, 14) +#define TPS_STATUS_PP_CABLE_SWITCH(x) TPS_FIELD_GET(TPS_STATUS_PP_CABLE_SWITCH_MASK, (x)) +#define TPS_STATUS_POWER_SOURCE_MASK GENMASK(19, 18) +#define TPS_STATUS_POWER_SOURCE(x) TPS_FIELD_GET(TPS_STATUS_POWER_SOURCE_MASK, (x)) +#define TPS_STATUS_VBUS_STATUS_MASK GENMASK(21, 20) +#define TPS_STATUS_VBUS_STATUS(x) TPS_FIELD_GET(TPS_STATUS_VBUS_STATUS_MASK, (x)) +#define TPS_STATUS_USB_HOST_PRESENT_MASK GENMASK(23, 22) +#define TPS_STATUS_USB_HOST_PRESENT(x) TPS_FIELD_GET(TPS_STATUS_USB_HOST_PRESENT_MASK, (x)) +#define TPS_STATUS_LEGACY_MASK GENMASK(25, 24) +#define TPS_STATUS_LEGACY(x) TPS_FIELD_GET(TPS_STATUS_LEGACY_MASK, (x)) + +#define TPS_STATUS_CONN_STATE_NO_CONN 0 +#define TPS_STATUS_CONN_STATE_DISABLED 1 +#define TPS_STATUS_CONN_STATE_AUDIO_CONN 2 +#define TPS_STATUS_CONN_STATE_DEBUG_CONN 3 +#define TPS_STATUS_CONN_STATE_NO_CONN_R_A 4 +#define TPS_STATUS_CONN_STATE_RESERVED 5 +#define TPS_STATUS_CONN_STATE_CONN_NO_R_A 6 +#define TPS_STATUS_CONN_STATE_CONN_WITH_R_A 7 + +#define TPS_STATUS_PP_SWITCH_STATE_DISABLED 0 +#define TPS_STATUS_PP_SWITCH_STATE_FAULT 1 +#define TPS_STATUS_PP_SWITCH_STATE_OUT 2 +#define TPS_STATUS_PP_SWITCH_STATE_IN 3 + +#define TPS_STATUS_POWER_SOURCE_UNKNOWN 0 +#define TPS_STATUS_POWER_SOURCE_VIN_3P3 1 +#define TPS_STATUS_POWER_SOURCE_DEAD_BAT 2 +#define TPS_STATUS_POWER_SOURCE_VBUS 3 + +#define TPS_STATUS_VBUS_STATUS_VSAFE0V 0 +#define TPS_STATUS_VBUS_STATUS_VSAFE5V 1 +#define TPS_STATUS_VBUS_STATUS_PD 2 +#define TPS_STATUS_VBUS_STATUS_FAULT 3 + +#define TPS_STATUS_USB_HOST_PRESENT_NO 0 +#define TPS_STATUS_USB_HOST_PRESENT_PD_NO_USB 1 +#define TPS_STATUS_USB_HOST_PRESENT_NO_PD 2 +#define TPS_STATUS_USB_HOST_PRESENT_PD_USB 3 + +#define TPS_STATUS_LEGACY_NO 0 +#define TPS_STATUS_LEGACY_SINK 1 +#define TPS_STATUS_LEGACY_SOURCE 2 + +/* TPS_REG_INT_* bits */ +#define TPS_REG_INT_USER_VID_ALT_MODE_OTHER_VDM BIT_ULL(27+32) +#define TPS_REG_INT_USER_VID_ALT_MODE_ATTN_VDM BIT_ULL(26+32) +#define TPS_REG_INT_USER_VID_ALT_MODE_EXIT BIT_ULL(25+32) +#define TPS_REG_INT_USER_VID_ALT_MODE_ENTERED BIT_ULL(24+32) +#define TPS_REG_INT_EXIT_MODES_COMPLETE BIT_ULL(20+32) +#define TPS_REG_INT_DISCOVER_MODES_COMPLETE BIT_ULL(19+32) +#define TPS_REG_INT_VDM_MSG_SENT BIT_ULL(18+32) +#define TPS_REG_INT_VDM_ENTERED_MODE BIT_ULL(17+32) +#define TPS_REG_INT_ERROR_UNABLE_TO_SOURCE BIT_ULL(14+32) +#define TPS_REG_INT_SRC_TRANSITION BIT_ULL(10+32) +#define TPS_REG_INT_ERROR_DISCHARGE_FAILED BIT_ULL(9+32) +#define TPS_REG_INT_ERROR_MESSAGE_DATA BIT_ULL(7+32) +#define TPS_REG_INT_ERROR_PROTOCOL_ERROR BIT_ULL(6+32) +#define TPS_REG_INT_ERROR_MISSING_GET_CAP_MESSAGE BIT_ULL(4+32) +#define TPS_REG_INT_ERROR_POWER_EVENT_OCCURRED BIT_ULL(3+32) +#define TPS_REG_INT_ERROR_CAN_PROVIDE_PWR_LATER BIT_ULL(2+32) +#define TPS_REG_INT_ERROR_CANNOT_PROVIDE_PWR BIT_ULL(1+32) +#define TPS_REG_INT_ERROR_DEVICE_INCOMPATIBLE BIT_ULL(0+32) +#define TPS_REG_INT_CMD2_COMPLETE BIT(31) +#define TPS_REG_INT_CMD1_COMPLETE BIT(30) +#define TPS_REG_INT_ADC_HIGH_THRESHOLD BIT(29) +#define TPS_REG_INT_ADC_LOW_THRESHOLD BIT(28) +#define TPS_REG_INT_PD_STATUS_UPDATE BIT(27) +#define TPS_REG_INT_STATUS_UPDATE BIT(26) +#define TPS_REG_INT_DATA_STATUS_UPDATE BIT(25) +#define TPS_REG_INT_POWER_STATUS_UPDATE BIT(24) +#define TPS_REG_INT_PP_SWITCH_CHANGED BIT(23) +#define TPS_REG_INT_HIGH_VOLTAGE_WARNING BIT(22) +#define TPS_REG_INT_USB_HOST_PRESENT_NO_LONGER BIT(21) +#define TPS_REG_INT_USB_HOST_PRESENT BIT(20) +#define TPS_REG_INT_GOTO_MIN_RECEIVED BIT(19) +#define TPS_REG_INT_PR_SWAP_REQUESTED BIT(17) +#define TPS_REG_INT_SINK_CAP_MESSAGE_READY BIT(15) +#define TPS_REG_INT_SOURCE_CAP_MESSAGE_READY BIT(14) +#define TPS_REG_INT_NEW_CONTRACT_AS_PROVIDER BIT(13) +#define TPS_REG_INT_NEW_CONTRACT_AS_CONSUMER BIT(12) +#define TPS_REG_INT_VDM_RECEIVED BIT(11) +#define TPS_REG_INT_ATTENTION_RECEIVED BIT(10) +#define TPS_REG_INT_OVERCURRENT BIT(9) +#define TPS_REG_INT_BIST BIT(8) +#define TPS_REG_INT_RDO_RECEIVED_FROM_SINK BIT(7) +#define TPS_REG_INT_DR_SWAP_COMPLETE BIT(5) +#define TPS_REG_INT_PR_SWAP_COMPLETE BIT(4) +#define TPS_REG_INT_PLUG_EVENT BIT(3) +#define TPS_REG_INT_HARD_RESET BIT(1) +#define TPS_REG_INT_PD_SOFT_RESET BIT(0) + +/* Apple-specific TPS_REG_INT_* bits */ +#define APPLE_CD_REG_INT_DATA_STATUS_UPDATE BIT(10) +#define APPLE_CD_REG_INT_POWER_STATUS_UPDATE BIT(9) +#define APPLE_CD_REG_INT_STATUS_UPDATE BIT(8) +#define APPLE_CD_REG_INT_PLUG_EVENT BIT(1) + +/* TPS_REG_SYSTEM_POWER_STATE states */ +#define TPS_SYSTEM_POWER_STATE_S0 0x00 +#define TPS_SYSTEM_POWER_STATE_S3 0x03 +#define TPS_SYSTEM_POWER_STATE_S4 0x04 +#define TPS_SYSTEM_POWER_STATE_S5 0x05 + +/* TPS_REG_POWER_STATUS bits */ +#define TPS_POWER_STATUS_CONNECTION(x) TPS_FIELD_GET(BIT(0), (x)) +#define TPS_POWER_STATUS_SOURCESINK(x) TPS_FIELD_GET(BIT(1), (x)) +#define TPS_POWER_STATUS_BC12_DET(x) TPS_FIELD_GET(BIT(2), (x)) + +#define TPS_POWER_STATUS_TYPEC_CURRENT_MASK GENMASK(3, 2) +#define TPS_POWER_STATUS_PWROPMODE(p) TPS_FIELD_GET(TPS_POWER_STATUS_TYPEC_CURRENT_MASK, (p)) +#define TPS_POWER_STATUS_BC12_STATUS_MASK GENMASK(6, 5) +#define TPS_POWER_STATUS_BC12_STATUS(p) TPS_FIELD_GET(TPS_POWER_STATUS_BC12_STATUS_MASK, (p)) + +#define TPS_POWER_STATUS_TYPEC_CURRENT_USB 0 +#define TPS_POWER_STATUS_TYPEC_CURRENT_1A5 1 +#define TPS_POWER_STATUS_TYPEC_CURRENT_3A0 2 +#define TPS_POWER_STATUS_TYPEC_CURRENT_PD 3 + +#define TPS_POWER_STATUS_BC12_STATUS_SDP 0 +#define TPS_POWER_STATUS_BC12_STATUS_CDP 2 +#define TPS_POWER_STATUS_BC12_STATUS_DCP 3 + +/* TPS_REG_DATA_STATUS bits */ +#define TPS_DATA_STATUS_DATA_CONNECTION BIT(0) +#define TPS_DATA_STATUS_UPSIDE_DOWN BIT(1) +#define TPS_DATA_STATUS_ACTIVE_CABLE BIT(2) +#define TPS_DATA_STATUS_USB2_CONNECTION BIT(4) +#define TPS_DATA_STATUS_USB3_CONNECTION BIT(5) +#define TPS_DATA_STATUS_USB3_GEN2 BIT(6) +#define TPS_DATA_STATUS_USB_DATA_ROLE BIT(7) +#define TPS_DATA_STATUS_DP_CONNECTION BIT(8) +#define TPS_DATA_STATUS_DP_SINK BIT(9) +#define TPS_DATA_STATUS_TBT_CONNECTION BIT(16) +#define TPS_DATA_STATUS_TBT_TYPE BIT(17) +#define TPS_DATA_STATUS_OPTICAL_CABLE BIT(18) +#define TPS_DATA_STATUS_ACTIVE_LINK_TRAIN BIT(20) +#define TPS_DATA_STATUS_FORCE_LSX BIT(23) +#define TPS_DATA_STATUS_POWER_MISMATCH BIT(24) + +#define TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK GENMASK(11, 10) +#define TPS_DATA_STATUS_DP_PIN_ASSIGNMENT(x) \ + TPS_FIELD_GET(TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK, (x)) +#define TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK GENMASK(27, 25) +#define TPS_DATA_STATUS_TBT_CABLE_SPEED \ + TPS_FIELD_GET(TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK, (x)) +#define TPS_DATA_STATUS_TBT_CABLE_GEN_MASK GENMASK(29, 28) +#define TPS_DATA_STATUS_TBT_CABLE_GEN \ + TPS_FIELD_GET(TPS_DATA_STATUS_TBT_CABLE_GEN_MASK, (x)) + +/* Map data status to DP spec assignments */ +#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT(x) \ + ((TPS_DATA_STATUS_DP_PIN_ASSIGNMENT(x) << 1) | \ + TPS_FIELD_GET(TPS_DATA_STATUS_USB3_CONNECTION, (x))) +#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_E 0 +#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_F BIT(0) +#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_C BIT(1) +#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_D (BIT(1) | BIT(0)) +#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_A BIT(2) +#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B (BIT(2) | BIT(1)) + +#endif /* __TPS6598X_H__ */ diff --git a/drivers/usb/typec/tipd/trace.c b/drivers/usb/typec/tipd/trace.c new file mode 100644 index 0000000000..016e68048d --- /dev/null +++ b/drivers/usb/typec/tipd/trace.c @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * TI TPS6598x USB Power Delivery Controller Trace Support + * + * Copyright (C) 2021, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ +#define CREATE_TRACE_POINTS +#include "trace.h" diff --git a/drivers/usb/typec/tipd/trace.h b/drivers/usb/typec/tipd/trace.h new file mode 100644 index 0000000000..12cad1bde7 --- /dev/null +++ b/drivers/usb/typec/tipd/trace.h @@ -0,0 +1,306 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Driver for TI TPS6598x USB Power Delivery controller family + * + * Copyright (C) 2020 Purism SPC + * Author: Guido Günther <agx@sigxcpu.org> + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM tps6598x + +#if !defined(_TPS6598X_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ) +#define _TPS6598X_TRACE_H_ + +#include "tps6598x.h" + +#include <linux/stringify.h> +#include <linux/types.h> +#include <linux/tracepoint.h> + +#define show_irq_flags(flags) \ + __print_flags_u64(flags, "|", \ + { TPS_REG_INT_PD_SOFT_RESET, "PD_SOFT_RESET" }, \ + { TPS_REG_INT_HARD_RESET, "HARD_RESET" }, \ + { TPS_REG_INT_PLUG_EVENT, "PLUG_EVENT" }, \ + { TPS_REG_INT_PR_SWAP_COMPLETE, "PR_SWAP_COMPLETE" }, \ + { TPS_REG_INT_DR_SWAP_COMPLETE, "DR_SWAP_COMPLETE" }, \ + { TPS_REG_INT_RDO_RECEIVED_FROM_SINK, "RDO_RECEIVED_FROM_SINK" }, \ + { TPS_REG_INT_BIST, "BIST" }, \ + { TPS_REG_INT_OVERCURRENT, "OVERCURRENT" }, \ + { TPS_REG_INT_ATTENTION_RECEIVED, "ATTENTION_RECEIVED" }, \ + { TPS_REG_INT_VDM_RECEIVED, "VDM_RECEIVED" }, \ + { TPS_REG_INT_NEW_CONTRACT_AS_CONSUMER, "NEW_CONTRACT_AS_CONSUMER" }, \ + { TPS_REG_INT_NEW_CONTRACT_AS_PROVIDER, "NEW_CONTRACT_AS_PROVIDER" }, \ + { TPS_REG_INT_SOURCE_CAP_MESSAGE_READY, "SOURCE_CAP_MESSAGE_READY" }, \ + { TPS_REG_INT_SINK_CAP_MESSAGE_READY, "SINK_CAP_MESSAGE_READY" }, \ + { TPS_REG_INT_PR_SWAP_REQUESTED, "PR_SWAP_REQUESTED" }, \ + { TPS_REG_INT_GOTO_MIN_RECEIVED, "GOTO_MIN_RECEIVED" }, \ + { TPS_REG_INT_USB_HOST_PRESENT, "USB_HOST_PRESENT" }, \ + { TPS_REG_INT_USB_HOST_PRESENT_NO_LONGER, "USB_HOST_PRESENT_NO_LONGER" }, \ + { TPS_REG_INT_HIGH_VOLTAGE_WARNING, "HIGH_VOLTAGE_WARNING" }, \ + { TPS_REG_INT_PP_SWITCH_CHANGED, "PP_SWITCH_CHANGED" }, \ + { TPS_REG_INT_POWER_STATUS_UPDATE, "POWER_STATUS_UPDATE" }, \ + { TPS_REG_INT_DATA_STATUS_UPDATE, "DATA_STATUS_UPDATE" }, \ + { TPS_REG_INT_STATUS_UPDATE, "STATUS_UPDATE" }, \ + { TPS_REG_INT_PD_STATUS_UPDATE, "PD_STATUS_UPDATE" }, \ + { TPS_REG_INT_ADC_LOW_THRESHOLD, "ADC_LOW_THRESHOLD" }, \ + { TPS_REG_INT_ADC_HIGH_THRESHOLD, "ADC_HIGH_THRESHOLD" }, \ + { TPS_REG_INT_CMD1_COMPLETE, "CMD1_COMPLETE" }, \ + { TPS_REG_INT_CMD2_COMPLETE, "CMD2_COMPLETE" }, \ + { TPS_REG_INT_ERROR_DEVICE_INCOMPATIBLE, "ERROR_DEVICE_INCOMPATIBLE" }, \ + { TPS_REG_INT_ERROR_CANNOT_PROVIDE_PWR, "ERROR_CANNOT_PROVIDE_PWR" }, \ + { TPS_REG_INT_ERROR_CAN_PROVIDE_PWR_LATER, "ERROR_CAN_PROVIDE_PWR_LATER" }, \ + { TPS_REG_INT_ERROR_POWER_EVENT_OCCURRED, "ERROR_POWER_EVENT_OCCURRED" }, \ + { TPS_REG_INT_ERROR_MISSING_GET_CAP_MESSAGE, "ERROR_MISSING_GET_CAP_MESSAGE" }, \ + { TPS_REG_INT_ERROR_PROTOCOL_ERROR, "ERROR_PROTOCOL_ERROR" }, \ + { TPS_REG_INT_ERROR_MESSAGE_DATA, "ERROR_MESSAGE_DATA" }, \ + { TPS_REG_INT_ERROR_DISCHARGE_FAILED, "ERROR_DISCHARGE_FAILED" }, \ + { TPS_REG_INT_SRC_TRANSITION, "SRC_TRANSITION" }, \ + { TPS_REG_INT_ERROR_UNABLE_TO_SOURCE, "ERROR_UNABLE_TO_SOURCE" }, \ + { TPS_REG_INT_VDM_ENTERED_MODE, "VDM_ENTERED_MODE" }, \ + { TPS_REG_INT_VDM_MSG_SENT, "VDM_MSG_SENT" }, \ + { TPS_REG_INT_DISCOVER_MODES_COMPLETE, "DISCOVER_MODES_COMPLETE" }, \ + { TPS_REG_INT_EXIT_MODES_COMPLETE, "EXIT_MODES_COMPLETE" }, \ + { TPS_REG_INT_USER_VID_ALT_MODE_ENTERED, "USER_VID_ALT_MODE_ENTERED" }, \ + { TPS_REG_INT_USER_VID_ALT_MODE_EXIT, "USER_VID_ALT_MODE_EXIT" }, \ + { TPS_REG_INT_USER_VID_ALT_MODE_ATTN_VDM, "USER_VID_ALT_MODE_ATTN_VDM" }, \ + { TPS_REG_INT_USER_VID_ALT_MODE_OTHER_VDM, "USER_VID_ALT_MODE_OTHER_VDM" }) + +#define show_cd321x_irq_flags(flags) \ + __print_flags_u64(flags, "|", \ + { APPLE_CD_REG_INT_PLUG_EVENT, "PLUG_EVENT" }, \ + { APPLE_CD_REG_INT_POWER_STATUS_UPDATE, "POWER_STATUS_UPDATE" }, \ + { APPLE_CD_REG_INT_DATA_STATUS_UPDATE, "DATA_STATUS_UPDATE" }, \ + { APPLE_CD_REG_INT_STATUS_UPDATE, "STATUS_UPDATE" }) + +#define TPS6598X_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_STATUS_CONN_STATE_MASK | \ + TPS_STATUS_PP_5V0_SWITCH_MASK | \ + TPS_STATUS_PP_HV_SWITCH_MASK | \ + TPS_STATUS_PP_EXT_SWITCH_MASK | \ + TPS_STATUS_PP_CABLE_SWITCH_MASK | \ + TPS_STATUS_POWER_SOURCE_MASK | \ + TPS_STATUS_VBUS_STATUS_MASK | \ + TPS_STATUS_USB_HOST_PRESENT_MASK | \ + TPS_STATUS_LEGACY_MASK)) + +#define show_status_conn_state(status) \ + __print_symbolic(TPS_STATUS_CONN_STATE((status)), \ + { TPS_STATUS_CONN_STATE_CONN_WITH_R_A, "conn-Ra" }, \ + { TPS_STATUS_CONN_STATE_CONN_NO_R_A, "conn-no-Ra" }, \ + { TPS_STATUS_CONN_STATE_NO_CONN_R_A, "no-conn-Ra" }, \ + { TPS_STATUS_CONN_STATE_DEBUG_CONN, "debug" }, \ + { TPS_STATUS_CONN_STATE_AUDIO_CONN, "audio" }, \ + { TPS_STATUS_CONN_STATE_DISABLED, "disabled" }, \ + { TPS_STATUS_CONN_STATE_NO_CONN, "no-conn" }) + +#define show_status_pp_switch_state(status) \ + __print_symbolic(status, \ + { TPS_STATUS_PP_SWITCH_STATE_IN, "in" }, \ + { TPS_STATUS_PP_SWITCH_STATE_OUT, "out" }, \ + { TPS_STATUS_PP_SWITCH_STATE_FAULT, "fault" }, \ + { TPS_STATUS_PP_SWITCH_STATE_DISABLED, "off" }) + +#define show_status_power_sources(status) \ + __print_symbolic(TPS_STATUS_POWER_SOURCE(status), \ + { TPS_STATUS_POWER_SOURCE_VBUS, "vbus" }, \ + { TPS_STATUS_POWER_SOURCE_VIN_3P3, "vin-3p3" }, \ + { TPS_STATUS_POWER_SOURCE_DEAD_BAT, "dead-battery" }, \ + { TPS_STATUS_POWER_SOURCE_UNKNOWN, "unknown" }) + +#define show_status_vbus_status(status) \ + __print_symbolic(TPS_STATUS_VBUS_STATUS(status), \ + { TPS_STATUS_VBUS_STATUS_VSAFE0V, "vSafe0V" }, \ + { TPS_STATUS_VBUS_STATUS_VSAFE5V, "vSafe5V" }, \ + { TPS_STATUS_VBUS_STATUS_PD, "pd" }, \ + { TPS_STATUS_VBUS_STATUS_FAULT, "fault" }) + +#define show_status_usb_host_present(status) \ + __print_symbolic(TPS_STATUS_USB_HOST_PRESENT(status), \ + { TPS_STATUS_USB_HOST_PRESENT_PD_USB, "pd-usb" }, \ + { TPS_STATUS_USB_HOST_PRESENT_NO_PD, "no-pd" }, \ + { TPS_STATUS_USB_HOST_PRESENT_PD_NO_USB, "pd-no-usb" }, \ + { TPS_STATUS_USB_HOST_PRESENT_NO, "no" }) + +#define show_status_legacy(status) \ + __print_symbolic(TPS_STATUS_LEGACY(status), \ + { TPS_STATUS_LEGACY_SOURCE, "source" }, \ + { TPS_STATUS_LEGACY_SINK, "sink" }, \ + { TPS_STATUS_LEGACY_NO, "no" }) + +#define show_status_flags(flags) \ + __print_flags((flags & TPS6598X_STATUS_FLAGS_MASK), "|", \ + { TPS_STATUS_PLUG_PRESENT, "PLUG_PRESENT" }, \ + { TPS_STATUS_PLUG_UPSIDE_DOWN, "UPSIDE_DOWN" }, \ + { TPS_STATUS_PORTROLE, "PORTROLE" }, \ + { TPS_STATUS_DATAROLE, "DATAROLE" }, \ + { TPS_STATUS_VCONN, "VCONN" }, \ + { TPS_STATUS_OVERCURRENT, "OVERCURRENT" }, \ + { TPS_STATUS_GOTO_MIN_ACTIVE, "GOTO_MIN_ACTIVE" }, \ + { TPS_STATUS_BIST, "BIST" }, \ + { TPS_STATUS_HIGH_VOLAGE_WARNING, "HIGH_VOLAGE_WARNING" }, \ + { TPS_STATUS_HIGH_LOW_VOLTAGE_WARNING, "HIGH_LOW_VOLTAGE_WARNING" }) + +#define show_power_status_source_sink(power_status) \ + __print_symbolic(TPS_POWER_STATUS_SOURCESINK(power_status), \ + { 1, "sink" }, \ + { 0, "source" }) + +#define show_power_status_typec_status(power_status) \ + __print_symbolic(TPS_POWER_STATUS_PWROPMODE(power_status), \ + { TPS_POWER_STATUS_TYPEC_CURRENT_PD, "pd" }, \ + { TPS_POWER_STATUS_TYPEC_CURRENT_3A0, "3.0A" }, \ + { TPS_POWER_STATUS_TYPEC_CURRENT_1A5, "1.5A" }, \ + { TPS_POWER_STATUS_TYPEC_CURRENT_USB, "usb" }) + +#define show_power_status_bc12_status(power_status) \ + __print_symbolic(TPS_POWER_STATUS_BC12_STATUS(power_status), \ + { TPS_POWER_STATUS_BC12_STATUS_DCP, "dcp" }, \ + { TPS_POWER_STATUS_BC12_STATUS_CDP, "cdp" }, \ + { TPS_POWER_STATUS_BC12_STATUS_SDP, "sdp" }) + +#define TPS_DATA_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK | \ + TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK | \ + TPS_DATA_STATUS_TBT_CABLE_GEN_MASK)) + +#define show_data_status_flags(data_status) \ + __print_flags(data_status & TPS_DATA_STATUS_FLAGS_MASK, "|", \ + { TPS_DATA_STATUS_DATA_CONNECTION, "DATA_CONNECTION" }, \ + { TPS_DATA_STATUS_UPSIDE_DOWN, "DATA_UPSIDE_DOWN" }, \ + { TPS_DATA_STATUS_ACTIVE_CABLE, "ACTIVE_CABLE" }, \ + { TPS_DATA_STATUS_USB2_CONNECTION, "USB2_CONNECTION" }, \ + { TPS_DATA_STATUS_USB3_CONNECTION, "USB3_CONNECTION" }, \ + { TPS_DATA_STATUS_USB3_GEN2, "USB3_GEN2" }, \ + { TPS_DATA_STATUS_USB_DATA_ROLE, "USB_DATA_ROLE" }, \ + { TPS_DATA_STATUS_DP_CONNECTION, "DP_CONNECTION" }, \ + { TPS_DATA_STATUS_DP_SINK, "DP_SINK" }, \ + { TPS_DATA_STATUS_TBT_CONNECTION, "TBT_CONNECTION" }, \ + { TPS_DATA_STATUS_TBT_TYPE, "TBT_TYPE" }, \ + { TPS_DATA_STATUS_OPTICAL_CABLE, "OPTICAL_CABLE" }, \ + { TPS_DATA_STATUS_ACTIVE_LINK_TRAIN, "ACTIVE_LINK_TRAIN" }, \ + { TPS_DATA_STATUS_FORCE_LSX, "FORCE_LSX" }, \ + { TPS_DATA_STATUS_POWER_MISMATCH, "POWER_MISMATCH" }) + +#define show_data_status_dp_pin_assignment(data_status) \ + __print_symbolic(TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT(data_status), \ + { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_E, "E" }, \ + { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_F, "F" }, \ + { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_C, "C" }, \ + { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_D, "D" }, \ + { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_A, "A" }, \ + { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B, "B" }) + +#define maybe_show_data_status_dp_pin_assignment(data_status) \ + (data_status & TPS_DATA_STATUS_DP_CONNECTION ? \ + show_data_status_dp_pin_assignment(data_status) : "") + +TRACE_EVENT(tps6598x_irq, + TP_PROTO(u64 event1, + u64 event2), + TP_ARGS(event1, event2), + + TP_STRUCT__entry( + __field(u64, event1) + __field(u64, event2) + ), + + TP_fast_assign( + __entry->event1 = event1; + __entry->event2 = event2; + ), + + TP_printk("event1=%s, event2=%s", + show_irq_flags(__entry->event1), + show_irq_flags(__entry->event2)) +); + +TRACE_EVENT(cd321x_irq, + TP_PROTO(u64 event), + TP_ARGS(event), + + TP_STRUCT__entry( + __field(u64, event) + ), + + TP_fast_assign( + __entry->event = event; + ), + + TP_printk("event=%s", + show_cd321x_irq_flags(__entry->event)) +); + +TRACE_EVENT(tps6598x_status, + TP_PROTO(u32 status), + TP_ARGS(status), + + TP_STRUCT__entry( + __field(u32, status) + ), + + TP_fast_assign( + __entry->status = status; + ), + + TP_printk("conn: %s, pp_5v0: %s, pp_hv: %s, pp_ext: %s, pp_cable: %s, " + "pwr-src: %s, vbus: %s, usb-host: %s, legacy: %s, flags: %s", + show_status_conn_state(__entry->status), + show_status_pp_switch_state(TPS_STATUS_PP_5V0_SWITCH(__entry->status)), + show_status_pp_switch_state(TPS_STATUS_PP_HV_SWITCH(__entry->status)), + show_status_pp_switch_state(TPS_STATUS_PP_EXT_SWITCH(__entry->status)), + show_status_pp_switch_state(TPS_STATUS_PP_CABLE_SWITCH(__entry->status)), + show_status_power_sources(__entry->status), + show_status_vbus_status(__entry->status), + show_status_usb_host_present(__entry->status), + show_status_legacy(__entry->status), + show_status_flags(__entry->status) + ) +); + +TRACE_EVENT(tps6598x_power_status, + TP_PROTO(u16 power_status), + TP_ARGS(power_status), + + TP_STRUCT__entry( + __field(u16, power_status) + ), + + TP_fast_assign( + __entry->power_status = power_status; + ), + + TP_printk("conn: %d, pwr-role: %s, typec: %s, bc: %s", + !!TPS_POWER_STATUS_CONNECTION(__entry->power_status), + show_power_status_source_sink(__entry->power_status), + show_power_status_typec_status(__entry->power_status), + show_power_status_bc12_status(__entry->power_status) + ) +); + +TRACE_EVENT(tps6598x_data_status, + TP_PROTO(u32 data_status), + TP_ARGS(data_status), + + TP_STRUCT__entry( + __field(u32, data_status) + ), + + TP_fast_assign( + __entry->data_status = data_status; + ), + + TP_printk("%s%s%s", + show_data_status_flags(__entry->data_status), + __entry->data_status & TPS_DATA_STATUS_DP_CONNECTION ? ", DP pinout " : "", + maybe_show_data_status_dp_pin_assignment(__entry->data_status) + ) +); + +#endif /* _TPS6598X_TRACE_H_ */ + +/* This part must be outside protection */ +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#include <trace/define_trace.h> diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig new file mode 100644 index 0000000000..bdcb1764cf --- /dev/null +++ b/drivers/usb/typec/ucsi/Kconfig @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 + +config TYPEC_UCSI + tristate "USB Type-C Connector System Software Interface driver" + depends on !CPU_BIG_ENDIAN + depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH + select USB_COMMON if DEBUG_FS + help + USB Type-C Connector System Software Interface (UCSI) is a + specification for an interface that allows the operating system to + control the USB Type-C ports. On UCSI system the USB Type-C ports + function autonomously by default, but in order to get the status of + the ports and support basic operations like role swapping, the driver + is required. UCSI is available on most of the new Intel based systems + that are equipped with Embedded Controller and USB Type-C ports. + + UCSI specification does not define the interface method, so depending + on the platform, ACPI, PCI, I2C, etc. may be used. Therefore this + driver only provides the core part, and separate drivers are needed + for every supported interface method. + + The UCSI specification can be downloaded from: + https://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html + + To compile the driver as a module, choose M here: the module will be + called typec_ucsi. + +if TYPEC_UCSI + +config UCSI_CCG + tristate "UCSI Interface Driver for Cypress CCGx" + depends on I2C + help + This driver enables UCSI support on platforms that expose a + Cypress CCGx Type-C controller over I2C interface. + + To compile the driver as a module, choose M here: the module will be + called ucsi_ccg. + +config UCSI_ACPI + tristate "UCSI ACPI Interface Driver" + depends on ACPI + help + This driver enables UCSI support on platforms that expose UCSI + interface as ACPI device. On new Intel Atom based platforms starting + from Broxton SoCs and Core platforms stating from Skylake, UCSI is an + ACPI enumerated device. + + To compile the driver as a module, choose M here: the module will be + called ucsi_acpi + +config UCSI_STM32G0 + tristate "UCSI Interface Driver for STM32G0" + depends on I2C + help + This driver enables UCSI support on platforms that expose a STM32G0 + Type-C controller over I2C interface. + + To compile the driver as a module, choose M here: the module will be + called ucsi_stm32g0. + +config UCSI_PMIC_GLINK + tristate "UCSI Qualcomm PMIC GLINK Interface Driver" + depends on QCOM_PMIC_GLINK + help + This driver enables UCSI support on platforms that expose UCSI + interface as PMIC GLINK device. + + To compile the driver as a module, choose M here: the module will be + called ucsi_glink. + +endif diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile new file mode 100644 index 0000000000..b4679f9469 --- /dev/null +++ b/drivers/usb/typec/ucsi/Makefile @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +CFLAGS_trace.o := -I$(src) + +obj-$(CONFIG_TYPEC_UCSI) += typec_ucsi.o + +typec_ucsi-y := ucsi.o + +typec_ucsi-$(CONFIG_DEBUG_FS) += debugfs.o + +typec_ucsi-$(CONFIG_TRACING) += trace.o + +ifneq ($(CONFIG_POWER_SUPPLY),) + typec_ucsi-y += psy.o +endif + +ifneq ($(CONFIG_TYPEC_DP_ALTMODE),) + typec_ucsi-y += displayport.o +endif + +obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o +obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o +obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o +obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o diff --git a/drivers/usb/typec/ucsi/debugfs.c b/drivers/usb/typec/ucsi/debugfs.c new file mode 100644 index 0000000000..f67733cecf --- /dev/null +++ b/drivers/usb/typec/ucsi/debugfs.c @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UCSI debugfs interface + * + * Copyright (C) 2023 Intel Corporation + * + * Authors: Rajaram Regupathy <rajaram.regupathy@intel.com> + * Gopal Saranya <saranya.gopal@intel.com> + */ +#include <linux/debugfs.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/usb.h> + +#include <asm/errno.h> + +#include "ucsi.h" + +static struct dentry *ucsi_debugfs_root; + +static int ucsi_cmd(void *data, u64 val) +{ + struct ucsi *ucsi = data; + int ret; + + memset(&ucsi->debugfs->response, 0, sizeof(ucsi->debugfs->response)); + ucsi->debugfs->status = 0; + + switch (UCSI_COMMAND(val)) { + case UCSI_SET_UOM: + case UCSI_SET_UOR: + case UCSI_SET_PDR: + case UCSI_CONNECTOR_RESET: + ret = ucsi_send_command(ucsi, val, NULL, 0); + break; + case UCSI_GET_CAPABILITY: + case UCSI_GET_CONNECTOR_CAPABILITY: + case UCSI_GET_ALTERNATE_MODES: + case UCSI_GET_CURRENT_CAM: + case UCSI_GET_PDOS: + case UCSI_GET_CABLE_PROPERTY: + case UCSI_GET_CONNECTOR_STATUS: + ret = ucsi_send_command(ucsi, val, + &ucsi->debugfs->response, + sizeof(ucsi->debugfs->response)); + break; + default: + ret = -EOPNOTSUPP; + } + + if (ret < 0) { + ucsi->debugfs->status = ret; + return ret; + } + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(ucsi_cmd_fops, NULL, ucsi_cmd, "0x%llx\n"); + +static int ucsi_resp_show(struct seq_file *s, void *not_used) +{ + struct ucsi *ucsi = s->private; + + if (ucsi->debugfs->status) + return ucsi->debugfs->status; + + seq_printf(s, "0x%016llx%016llx\n", ucsi->debugfs->response.high, + ucsi->debugfs->response.low); + return 0; +} +DEFINE_SHOW_ATTRIBUTE(ucsi_resp); + +void ucsi_debugfs_register(struct ucsi *ucsi) +{ + ucsi->debugfs = kzalloc(sizeof(*ucsi->debugfs), GFP_KERNEL); + if (!ucsi->debugfs) + return; + + ucsi->debugfs->dentry = debugfs_create_dir(dev_name(ucsi->dev), ucsi_debugfs_root); + debugfs_create_file("command", 0200, ucsi->debugfs->dentry, ucsi, &ucsi_cmd_fops); + debugfs_create_file("response", 0400, ucsi->debugfs->dentry, ucsi, &ucsi_resp_fops); +} + +void ucsi_debugfs_unregister(struct ucsi *ucsi) +{ + if (IS_ERR_OR_NULL(ucsi) || !ucsi->debugfs) + return; + + debugfs_remove_recursive(ucsi->debugfs->dentry); + kfree(ucsi->debugfs); +} + +void ucsi_debugfs_init(void) +{ + ucsi_debugfs_root = debugfs_create_dir("ucsi", usb_debug_root); +} + +void ucsi_debugfs_exit(void) +{ + debugfs_remove(ucsi_debugfs_root); +} diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c new file mode 100644 index 0000000000..73cd5bf350 --- /dev/null +++ b/drivers/usb/typec/ucsi/displayport.c @@ -0,0 +1,344 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UCSI DisplayPort Alternate Mode Support + * + * Copyright (C) 2018, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/usb/typec_dp.h> +#include <linux/usb/pd_vdo.h> + +#include "ucsi.h" + +#define UCSI_CMD_SET_NEW_CAM(_con_num_, _enter_, _cam_, _am_) \ + (UCSI_SET_NEW_CAM | ((_con_num_) << 16) | ((_enter_) << 23) | \ + ((_cam_) << 24) | ((u64)(_am_) << 32)) + +struct ucsi_dp { + struct typec_displayport_data data; + struct ucsi_connector *con; + struct typec_altmode *alt; + struct work_struct work; + int offset; + + bool override; + bool initialized; + + u32 header; + u32 *vdo_data; + u8 vdo_size; +}; + +/* + * Note. Alternate mode control is optional feature in UCSI. It means that even + * if the system supports alternate modes, the OS may not be aware of them. + * + * In most cases however, the OS will be able to see the supported alternate + * modes, but it may still not be able to configure them, not even enter or exit + * them. That is because UCSI defines alt mode details and alt mode "overriding" + * as separate options. + * + * In case alt mode details are supported, but overriding is not, the driver + * will still display the supported pin assignments and configuration, but any + * changes the user attempts to do will lead into failure with return value of + * -EOPNOTSUPP. + */ + +static int ucsi_displayport_enter(struct typec_altmode *alt, u32 *vdo) +{ + struct ucsi_dp *dp = typec_altmode_get_drvdata(alt); + struct ucsi *ucsi = dp->con->ucsi; + int svdm_version; + u64 command; + u8 cur = 0; + int ret; + + mutex_lock(&dp->con->lock); + + if (!dp->override && dp->initialized) { + const struct typec_altmode *p = typec_altmode_get_partner(alt); + + dev_warn(&p->dev, + "firmware doesn't support alternate mode overriding\n"); + ret = -EOPNOTSUPP; + goto err_unlock; + } + + command = UCSI_GET_CURRENT_CAM | UCSI_CONNECTOR_NUMBER(dp->con->num); + ret = ucsi_send_command(ucsi, command, &cur, sizeof(cur)); + if (ret < 0) { + if (ucsi->version > 0x0100) + goto err_unlock; + cur = 0xff; + } + + if (cur != 0xff) { + ret = dp->con->port_altmode[cur] == alt ? 0 : -EBUSY; + goto err_unlock; + } + + /* + * We can't send the New CAM command yet to the PPM as it needs the + * configuration value as well. Pretending that we have now entered the + * mode, and letting the alt mode driver continue. + */ + + svdm_version = typec_altmode_get_svdm_version(alt); + if (svdm_version < 0) { + ret = svdm_version; + goto err_unlock; + } + + dp->header = VDO(USB_TYPEC_DP_SID, 1, svdm_version, CMD_ENTER_MODE); + dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE); + dp->header |= VDO_CMDT(CMDT_RSP_ACK); + + dp->vdo_data = NULL; + dp->vdo_size = 1; + + schedule_work(&dp->work); + ret = 0; +err_unlock: + mutex_unlock(&dp->con->lock); + + return ret; +} + +static int ucsi_displayport_exit(struct typec_altmode *alt) +{ + struct ucsi_dp *dp = typec_altmode_get_drvdata(alt); + int svdm_version; + u64 command; + int ret = 0; + + mutex_lock(&dp->con->lock); + + if (!dp->override) { + const struct typec_altmode *p = typec_altmode_get_partner(alt); + + dev_warn(&p->dev, + "firmware doesn't support alternate mode overriding\n"); + ret = -EOPNOTSUPP; + goto out_unlock; + } + + command = UCSI_CMD_SET_NEW_CAM(dp->con->num, 0, dp->offset, 0); + ret = ucsi_send_command(dp->con->ucsi, command, NULL, 0); + if (ret < 0) + goto out_unlock; + + svdm_version = typec_altmode_get_svdm_version(alt); + if (svdm_version < 0) { + ret = svdm_version; + goto out_unlock; + } + + dp->header = VDO(USB_TYPEC_DP_SID, 1, svdm_version, CMD_EXIT_MODE); + dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE); + dp->header |= VDO_CMDT(CMDT_RSP_ACK); + + dp->vdo_data = NULL; + dp->vdo_size = 1; + + schedule_work(&dp->work); + +out_unlock: + mutex_unlock(&dp->con->lock); + + return ret; +} + +/* + * We do not actually have access to the Status Update VDO, so we have to guess + * things. + */ +static int ucsi_displayport_status_update(struct ucsi_dp *dp) +{ + u32 cap = dp->alt->vdo; + + dp->data.status = DP_STATUS_ENABLED; + + /* + * If pin assignement D is supported, claiming always + * that Multi-function is preferred. + */ + if (DP_CAP_CAPABILITY(cap) & DP_CAP_UFP_D) { + dp->data.status |= DP_STATUS_CON_UFP_D; + + if (DP_CAP_UFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D)) + dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC; + } else { + dp->data.status |= DP_STATUS_CON_DFP_D; + + if (DP_CAP_DFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D)) + dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC; + } + + dp->vdo_data = &dp->data.status; + dp->vdo_size = 2; + + return 0; +} + +static int ucsi_displayport_configure(struct ucsi_dp *dp) +{ + u32 pins = DP_CONF_GET_PIN_ASSIGN(dp->data.conf); + u64 command; + + if (!dp->override) + return 0; + + command = UCSI_CMD_SET_NEW_CAM(dp->con->num, 1, dp->offset, pins); + + return ucsi_send_command(dp->con->ucsi, command, NULL, 0); +} + +static int ucsi_displayport_vdm(struct typec_altmode *alt, + u32 header, const u32 *data, int count) +{ + struct ucsi_dp *dp = typec_altmode_get_drvdata(alt); + int cmd_type = PD_VDO_CMDT(header); + int cmd = PD_VDO_CMD(header); + int svdm_version; + + mutex_lock(&dp->con->lock); + + if (!dp->override && dp->initialized) { + const struct typec_altmode *p = typec_altmode_get_partner(alt); + + dev_warn(&p->dev, + "firmware doesn't support alternate mode overriding\n"); + mutex_unlock(&dp->con->lock); + return -EOPNOTSUPP; + } + + svdm_version = typec_altmode_get_svdm_version(alt); + if (svdm_version < 0) { + mutex_unlock(&dp->con->lock); + return svdm_version; + } + + switch (cmd_type) { + case CMDT_INIT: + if (PD_VDO_SVDM_VER(header) < svdm_version) { + typec_partner_set_svdm_version(dp->con->partner, PD_VDO_SVDM_VER(header)); + svdm_version = PD_VDO_SVDM_VER(header); + } + + dp->header = VDO(USB_TYPEC_DP_SID, 1, svdm_version, cmd); + dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE); + + switch (cmd) { + case DP_CMD_STATUS_UPDATE: + if (ucsi_displayport_status_update(dp)) + dp->header |= VDO_CMDT(CMDT_RSP_NAK); + else + dp->header |= VDO_CMDT(CMDT_RSP_ACK); + break; + case DP_CMD_CONFIGURE: + dp->data.conf = *data; + if (ucsi_displayport_configure(dp)) { + dp->header |= VDO_CMDT(CMDT_RSP_NAK); + } else { + dp->header |= VDO_CMDT(CMDT_RSP_ACK); + if (dp->initialized) + ucsi_altmode_update_active(dp->con); + else + dp->initialized = true; + } + break; + default: + dp->header |= VDO_CMDT(CMDT_RSP_ACK); + break; + } + + schedule_work(&dp->work); + break; + default: + break; + } + + mutex_unlock(&dp->con->lock); + + return 0; +} + +static const struct typec_altmode_ops ucsi_displayport_ops = { + .enter = ucsi_displayport_enter, + .exit = ucsi_displayport_exit, + .vdm = ucsi_displayport_vdm, +}; + +static void ucsi_displayport_work(struct work_struct *work) +{ + struct ucsi_dp *dp = container_of(work, struct ucsi_dp, work); + int ret; + + mutex_lock(&dp->con->lock); + + ret = typec_altmode_vdm(dp->alt, dp->header, + dp->vdo_data, dp->vdo_size); + if (ret) + dev_err(&dp->alt->dev, "VDM 0x%x failed\n", dp->header); + + dp->vdo_data = NULL; + dp->vdo_size = 0; + dp->header = 0; + + mutex_unlock(&dp->con->lock); +} + +void ucsi_displayport_remove_partner(struct typec_altmode *alt) +{ + struct ucsi_dp *dp; + + if (!alt) + return; + + dp = typec_altmode_get_drvdata(alt); + if (!dp) + return; + + dp->data.conf = 0; + dp->data.status = 0; + dp->initialized = false; +} + +struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con, + bool override, int offset, + struct typec_altmode_desc *desc) +{ + u8 all_assignments = BIT(DP_PIN_ASSIGN_C) | BIT(DP_PIN_ASSIGN_D) | + BIT(DP_PIN_ASSIGN_E); + struct typec_altmode *alt; + struct ucsi_dp *dp; + + /* We can't rely on the firmware with the capabilities. */ + desc->vdo |= DP_CAP_DP_SIGNALING | DP_CAP_RECEPTACLE; + + /* Claiming that we support all pin assignments */ + desc->vdo |= all_assignments << 8; + desc->vdo |= all_assignments << 16; + + alt = typec_port_register_altmode(con->port, desc); + if (IS_ERR(alt)) + return alt; + + dp = devm_kzalloc(&alt->dev, sizeof(*dp), GFP_KERNEL); + if (!dp) { + typec_unregister_altmode(alt); + return ERR_PTR(-ENOMEM); + } + + INIT_WORK(&dp->work, ucsi_displayport_work); + dp->override = override; + dp->offset = offset; + dp->con = con; + dp->alt = alt; + + alt->ops = &ucsi_displayport_ops; + typec_altmode_set_drvdata(alt, dp); + + return alt; +} diff --git a/drivers/usb/typec/ucsi/psy.c b/drivers/usb/typec/ucsi/psy.c new file mode 100644 index 0000000000..b35c6e0791 --- /dev/null +++ b/drivers/usb/typec/ucsi/psy.c @@ -0,0 +1,273 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Power Supply for UCSI + * + * Copyright (C) 2020, Intel Corporation + * Author: K V, Abhilash <abhilash.k.v@intel.com> + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/property.h> +#include <linux/usb/pd.h> + +#include "ucsi.h" + +/* Power Supply access to expose source power information */ +enum ucsi_psy_online_states { + UCSI_PSY_OFFLINE = 0, + UCSI_PSY_FIXED_ONLINE, + UCSI_PSY_PROG_ONLINE, +}; + +static enum power_supply_property ucsi_psy_props[] = { + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_SCOPE, +}; + +static int ucsi_psy_get_scope(struct ucsi_connector *con, + union power_supply_propval *val) +{ + u8 scope = POWER_SUPPLY_SCOPE_UNKNOWN; + struct device *dev = con->ucsi->dev; + + device_property_read_u8(dev, "scope", &scope); + if (scope == POWER_SUPPLY_SCOPE_UNKNOWN) { + u32 mask = UCSI_CAP_ATTR_POWER_AC_SUPPLY | + UCSI_CAP_ATTR_BATTERY_CHARGING; + + if (con->ucsi->cap.attributes & mask) + scope = POWER_SUPPLY_SCOPE_SYSTEM; + else + scope = POWER_SUPPLY_SCOPE_DEVICE; + } + val->intval = scope; + return 0; +} + +static int ucsi_psy_get_online(struct ucsi_connector *con, + union power_supply_propval *val) +{ + val->intval = UCSI_PSY_OFFLINE; + if (con->status.flags & UCSI_CONSTAT_CONNECTED && + (con->status.flags & UCSI_CONSTAT_PWR_DIR) == TYPEC_SINK) + val->intval = UCSI_PSY_FIXED_ONLINE; + return 0; +} + +static int ucsi_psy_get_voltage_min(struct ucsi_connector *con, + union power_supply_propval *val) +{ + u32 pdo; + + switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) { + case UCSI_CONSTAT_PWR_OPMODE_PD: + pdo = con->src_pdos[0]; + val->intval = pdo_fixed_voltage(pdo) * 1000; + break; + case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0: + case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5: + case UCSI_CONSTAT_PWR_OPMODE_BC: + case UCSI_CONSTAT_PWR_OPMODE_DEFAULT: + val->intval = UCSI_TYPEC_VSAFE5V * 1000; + break; + default: + val->intval = 0; + break; + } + return 0; +} + +static int ucsi_psy_get_voltage_max(struct ucsi_connector *con, + union power_supply_propval *val) +{ + u32 pdo; + + switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) { + case UCSI_CONSTAT_PWR_OPMODE_PD: + if (con->num_pdos > 0) { + pdo = con->src_pdos[con->num_pdos - 1]; + val->intval = pdo_fixed_voltage(pdo) * 1000; + } else { + val->intval = 0; + } + break; + case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0: + case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5: + case UCSI_CONSTAT_PWR_OPMODE_BC: + case UCSI_CONSTAT_PWR_OPMODE_DEFAULT: + val->intval = UCSI_TYPEC_VSAFE5V * 1000; + break; + default: + val->intval = 0; + break; + } + return 0; +} + +static int ucsi_psy_get_voltage_now(struct ucsi_connector *con, + union power_supply_propval *val) +{ + int index; + u32 pdo; + + switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) { + case UCSI_CONSTAT_PWR_OPMODE_PD: + index = rdo_index(con->rdo); + if (index > 0) { + pdo = con->src_pdos[index - 1]; + val->intval = pdo_fixed_voltage(pdo) * 1000; + } else { + val->intval = 0; + } + break; + case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0: + case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5: + case UCSI_CONSTAT_PWR_OPMODE_BC: + case UCSI_CONSTAT_PWR_OPMODE_DEFAULT: + val->intval = UCSI_TYPEC_VSAFE5V * 1000; + break; + default: + val->intval = 0; + break; + } + return 0; +} + +static int ucsi_psy_get_current_max(struct ucsi_connector *con, + union power_supply_propval *val) +{ + u32 pdo; + + switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) { + case UCSI_CONSTAT_PWR_OPMODE_PD: + if (con->num_pdos > 0) { + pdo = con->src_pdos[con->num_pdos - 1]; + val->intval = pdo_max_current(pdo) * 1000; + } else { + val->intval = 0; + } + break; + case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5: + val->intval = UCSI_TYPEC_1_5_CURRENT * 1000; + break; + case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0: + val->intval = UCSI_TYPEC_3_0_CURRENT * 1000; + break; + case UCSI_CONSTAT_PWR_OPMODE_BC: + case UCSI_CONSTAT_PWR_OPMODE_DEFAULT: + /* UCSI can't tell b/w DCP/CDP or USB2/3x1/3x2 SDP chargers */ + default: + val->intval = 0; + break; + } + return 0; +} + +static int ucsi_psy_get_current_now(struct ucsi_connector *con, + union power_supply_propval *val) +{ + u16 flags = con->status.flags; + + if (UCSI_CONSTAT_PWR_OPMODE(flags) == UCSI_CONSTAT_PWR_OPMODE_PD) + val->intval = rdo_op_current(con->rdo) * 1000; + else + val->intval = 0; + return 0; +} + +static int ucsi_psy_get_usb_type(struct ucsi_connector *con, + union power_supply_propval *val) +{ + u16 flags = con->status.flags; + + val->intval = POWER_SUPPLY_USB_TYPE_C; + if (flags & UCSI_CONSTAT_CONNECTED && + UCSI_CONSTAT_PWR_OPMODE(flags) == UCSI_CONSTAT_PWR_OPMODE_PD) + val->intval = POWER_SUPPLY_USB_TYPE_PD; + + return 0; +} + +static int ucsi_psy_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ucsi_connector *con = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_USB_TYPE: + return ucsi_psy_get_usb_type(con, val); + case POWER_SUPPLY_PROP_ONLINE: + return ucsi_psy_get_online(con, val); + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + return ucsi_psy_get_voltage_min(con, val); + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + return ucsi_psy_get_voltage_max(con, val); + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + return ucsi_psy_get_voltage_now(con, val); + case POWER_SUPPLY_PROP_CURRENT_MAX: + return ucsi_psy_get_current_max(con, val); + case POWER_SUPPLY_PROP_CURRENT_NOW: + return ucsi_psy_get_current_now(con, val); + case POWER_SUPPLY_PROP_SCOPE: + return ucsi_psy_get_scope(con, val); + default: + return -EINVAL; + } +} + +static enum power_supply_usb_type ucsi_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_C, + POWER_SUPPLY_USB_TYPE_PD, + POWER_SUPPLY_USB_TYPE_PD_PPS, +}; + +int ucsi_register_port_psy(struct ucsi_connector *con) +{ + struct power_supply_config psy_cfg = {}; + struct device *dev = con->ucsi->dev; + char *psy_name; + + psy_cfg.drv_data = con; + psy_cfg.fwnode = dev_fwnode(dev); + + psy_name = devm_kasprintf(dev, GFP_KERNEL, "ucsi-source-psy-%s%d", + dev_name(dev), con->num); + if (!psy_name) + return -ENOMEM; + + con->psy_desc.name = psy_name; + con->psy_desc.type = POWER_SUPPLY_TYPE_USB; + con->psy_desc.usb_types = ucsi_psy_usb_types; + con->psy_desc.num_usb_types = ARRAY_SIZE(ucsi_psy_usb_types); + con->psy_desc.properties = ucsi_psy_props; + con->psy_desc.num_properties = ARRAY_SIZE(ucsi_psy_props); + con->psy_desc.get_property = ucsi_psy_get_prop; + + con->psy = power_supply_register(dev, &con->psy_desc, &psy_cfg); + + return PTR_ERR_OR_ZERO(con->psy); +} + +void ucsi_unregister_port_psy(struct ucsi_connector *con) +{ + if (IS_ERR_OR_NULL(con->psy)) + return; + + power_supply_unregister(con->psy); + con->psy = NULL; +} + +void ucsi_port_psy_changed(struct ucsi_connector *con) +{ + if (IS_ERR_OR_NULL(con->psy)) + return; + + power_supply_changed(con->psy); +} diff --git a/drivers/usb/typec/ucsi/trace.c b/drivers/usb/typec/ucsi/trace.c new file mode 100644 index 0000000000..cb62ad8357 --- /dev/null +++ b/drivers/usb/typec/ucsi/trace.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +#define CREATE_TRACE_POINTS +#include "ucsi.h" +#include "trace.h" + +static const char * const ucsi_cmd_strs[] = { + [0] = "Unknown command", + [UCSI_PPM_RESET] = "PPM_RESET", + [UCSI_CANCEL] = "CANCEL", + [UCSI_CONNECTOR_RESET] = "CONNECTOR_RESET", + [UCSI_ACK_CC_CI] = "ACK_CC_CI", + [UCSI_SET_NOTIFICATION_ENABLE] = "SET_NOTIFICATION_ENABLE", + [UCSI_GET_CAPABILITY] = "GET_CAPABILITY", + [UCSI_GET_CONNECTOR_CAPABILITY] = "GET_CONNECTOR_CAPABILITY", + [UCSI_SET_UOM] = "SET_UOM", + [UCSI_SET_UOR] = "SET_UOR", + [UCSI_SET_PDM] = "SET_PDM", + [UCSI_SET_PDR] = "SET_PDR", + [UCSI_GET_ALTERNATE_MODES] = "GET_ALTERNATE_MODES", + [UCSI_GET_CAM_SUPPORTED] = "GET_CAM_SUPPORTED", + [UCSI_GET_CURRENT_CAM] = "GET_CURRENT_CAM", + [UCSI_SET_NEW_CAM] = "SET_NEW_CAM", + [UCSI_GET_PDOS] = "GET_PDOS", + [UCSI_GET_CABLE_PROPERTY] = "GET_CABLE_PROPERTY", + [UCSI_GET_CONNECTOR_STATUS] = "GET_CONNECTOR_STATUS", + [UCSI_GET_ERROR_STATUS] = "GET_ERROR_STATUS", +}; + +const char *ucsi_cmd_str(u64 raw_cmd) +{ + u8 cmd = raw_cmd & GENMASK(7, 0); + + return ucsi_cmd_strs[(cmd >= ARRAY_SIZE(ucsi_cmd_strs)) ? 0 : cmd]; +} + +const char *ucsi_cci_str(u32 cci) +{ + if (UCSI_CCI_CONNECTOR(cci)) { + if (cci & UCSI_CCI_ACK_COMPLETE) + return "Event pending (ACK completed)"; + if (cci & UCSI_CCI_COMMAND_COMPLETE) + return "Event pending (command completed)"; + return "Connector Change"; + } + if (cci & UCSI_CCI_ACK_COMPLETE) + return "ACK completed"; + if (cci & UCSI_CCI_COMMAND_COMPLETE) + return "Command completed"; + + return ""; +} + +static const char * const ucsi_recipient_strs[] = { + [UCSI_RECIPIENT_CON] = "port", + [UCSI_RECIPIENT_SOP] = "partner", + [UCSI_RECIPIENT_SOP_P] = "plug (prime)", + [UCSI_RECIPIENT_SOP_PP] = "plug (double prime)", +}; + +const char *ucsi_recipient_str(u8 recipient) +{ + return ucsi_recipient_strs[recipient]; +} diff --git a/drivers/usb/typec/ucsi/trace.h b/drivers/usb/typec/ucsi/trace.h new file mode 100644 index 0000000000..a0d3a934d3 --- /dev/null +++ b/drivers/usb/typec/ucsi/trace.h @@ -0,0 +1,120 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM ucsi + +#if !defined(__UCSI_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) +#define __UCSI_TRACE_H + +#include <linux/tracepoint.h> +#include <linux/usb/typec_altmode.h> + +const char *ucsi_cmd_str(u64 raw_cmd); +const char *ucsi_cci_str(u32 cci); +const char *ucsi_recipient_str(u8 recipient); + +DECLARE_EVENT_CLASS(ucsi_log_command, + TP_PROTO(u64 command, int ret), + TP_ARGS(command, ret), + TP_STRUCT__entry( + __field(u64, ctrl) + __field(int, ret) + ), + TP_fast_assign( + __entry->ctrl = command; + __entry->ret = ret; + ), + TP_printk("%s -> %s (err=%d)", ucsi_cmd_str(__entry->ctrl), + __entry->ret < 0 ? "FAIL" : "OK", + __entry->ret < 0 ? __entry->ret : 0) +); + +DEFINE_EVENT(ucsi_log_command, ucsi_run_command, + TP_PROTO(u64 command, int ret), + TP_ARGS(command, ret) +); + +DEFINE_EVENT(ucsi_log_command, ucsi_reset_ppm, + TP_PROTO(u64 command, int ret), + TP_ARGS(command, ret) +); + +DECLARE_EVENT_CLASS(ucsi_log_connector_status, + TP_PROTO(int port, struct ucsi_connector_status *status), + TP_ARGS(port, status), + TP_STRUCT__entry( + __field(int, port) + __field(u16, change) + __field(u8, opmode) + __field(u8, connected) + __field(u8, pwr_dir) + __field(u8, partner_flags) + __field(u8, partner_type) + __field(u32, request_data_obj) + __field(u8, bc_status) + ), + TP_fast_assign( + __entry->port = port - 1; + __entry->change = status->change; + __entry->opmode = UCSI_CONSTAT_PWR_OPMODE(status->flags); + __entry->connected = !!(status->flags & UCSI_CONSTAT_CONNECTED); + __entry->pwr_dir = !!(status->flags & UCSI_CONSTAT_PWR_DIR); + __entry->partner_flags = UCSI_CONSTAT_PARTNER_FLAGS(status->flags); + __entry->partner_type = UCSI_CONSTAT_PARTNER_TYPE(status->flags); + __entry->request_data_obj = status->request_data_obj; + __entry->bc_status = UCSI_CONSTAT_BC_STATUS(status->pwr_status); + ), + TP_printk("port%d status: change=%04x, opmode=%x, connected=%d, " + "sourcing=%d, partner_flags=%x, partner_type=%x, " + "request_data_obj=%08x, BC status=%x", __entry->port, + __entry->change, __entry->opmode, __entry->connected, + __entry->pwr_dir, __entry->partner_flags, __entry->partner_type, + __entry->request_data_obj, __entry->bc_status) +); + +DEFINE_EVENT(ucsi_log_connector_status, ucsi_connector_change, + TP_PROTO(int port, struct ucsi_connector_status *status), + TP_ARGS(port, status) +); + +DEFINE_EVENT(ucsi_log_connector_status, ucsi_register_port, + TP_PROTO(int port, struct ucsi_connector_status *status), + TP_ARGS(port, status) +); + +DECLARE_EVENT_CLASS(ucsi_log_register_altmode, + TP_PROTO(u8 recipient, struct typec_altmode *alt), + TP_ARGS(recipient, alt), + TP_STRUCT__entry( + __field(u8, recipient) + __field(u16, svid) + __field(u8, mode) + __field(u32, vdo) + ), + TP_fast_assign( + __entry->recipient = recipient; + __entry->svid = alt->svid; + __entry->mode = alt->mode; + __entry->vdo = alt->vdo; + ), + TP_printk("%s alt mode: svid %04x, mode %d vdo %x", + ucsi_recipient_str(__entry->recipient), __entry->svid, + __entry->mode, __entry->vdo) +); + +DEFINE_EVENT(ucsi_log_register_altmode, ucsi_register_altmode, + TP_PROTO(u8 recipient, struct typec_altmode *alt), + TP_ARGS(recipient, alt) +); + +#endif /* __UCSI_TRACE_H */ + +/* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . + +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +#include <trace/define_trace.h> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c new file mode 100644 index 0000000000..61b64558f9 --- /dev/null +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -0,0 +1,1633 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB Type-C Connector System Software Interface driver + * + * Copyright (C) 2017, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/completion.h> +#include <linux/property.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/usb/typec_dp.h> + +#include "ucsi.h" +#include "trace.h" + +/* + * UCSI_TIMEOUT_MS - PPM communication timeout + * + * Ideally we could use MIN_TIME_TO_RESPOND_WITH_BUSY (which is defined in UCSI + * specification) here as reference, but unfortunately we can't. It is very + * difficult to estimate the time it takes for the system to process the command + * before it is actually passed to the PPM. + */ +#define UCSI_TIMEOUT_MS 5000 + +/* + * UCSI_SWAP_TIMEOUT_MS - Timeout for role swap requests + * + * 5 seconds is close to the time it takes for CapsCounter to reach 0, so even + * if the PPM does not generate Connector Change events before that with + * partners that do not support USB Power Delivery, this should still work. + */ +#define UCSI_SWAP_TIMEOUT_MS 5000 + +static int ucsi_acknowledge_command(struct ucsi *ucsi) +{ + u64 ctrl; + + ctrl = UCSI_ACK_CC_CI; + ctrl |= UCSI_ACK_COMMAND_COMPLETE; + + return ucsi->ops->sync_write(ucsi, UCSI_CONTROL, &ctrl, sizeof(ctrl)); +} + +static int ucsi_acknowledge_connector_change(struct ucsi *ucsi) +{ + u64 ctrl; + + ctrl = UCSI_ACK_CC_CI; + ctrl |= UCSI_ACK_CONNECTOR_CHANGE; + + return ucsi->ops->sync_write(ucsi, UCSI_CONTROL, &ctrl, sizeof(ctrl)); +} + +static int ucsi_exec_command(struct ucsi *ucsi, u64 command); + +static int ucsi_read_error(struct ucsi *ucsi) +{ + u16 error; + int ret; + + /* Acknowledge the command that failed */ + ret = ucsi_acknowledge_command(ucsi); + if (ret) + return ret; + + ret = ucsi_exec_command(ucsi, UCSI_GET_ERROR_STATUS); + if (ret < 0) + return ret; + + ret = ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, &error, sizeof(error)); + if (ret) + return ret; + + ret = ucsi_acknowledge_command(ucsi); + if (ret) + return ret; + + switch (error) { + case UCSI_ERROR_INCOMPATIBLE_PARTNER: + return -EOPNOTSUPP; + case UCSI_ERROR_CC_COMMUNICATION_ERR: + return -ECOMM; + case UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL: + return -EPROTO; + case UCSI_ERROR_DEAD_BATTERY: + dev_warn(ucsi->dev, "Dead battery condition!\n"); + return -EPERM; + case UCSI_ERROR_INVALID_CON_NUM: + case UCSI_ERROR_UNREGONIZED_CMD: + case UCSI_ERROR_INVALID_CMD_ARGUMENT: + dev_err(ucsi->dev, "possible UCSI driver bug %u\n", error); + return -EINVAL; + case UCSI_ERROR_OVERCURRENT: + dev_warn(ucsi->dev, "Overcurrent condition\n"); + break; + case UCSI_ERROR_PARTNER_REJECTED_SWAP: + dev_warn(ucsi->dev, "Partner rejected swap\n"); + break; + case UCSI_ERROR_HARD_RESET: + dev_warn(ucsi->dev, "Hard reset occurred\n"); + break; + case UCSI_ERROR_PPM_POLICY_CONFLICT: + dev_warn(ucsi->dev, "PPM Policy conflict\n"); + break; + case UCSI_ERROR_SWAP_REJECTED: + dev_warn(ucsi->dev, "Swap rejected\n"); + break; + case UCSI_ERROR_UNDEFINED: + default: + dev_err(ucsi->dev, "unknown error %u\n", error); + break; + } + + return -EIO; +} + +static int ucsi_exec_command(struct ucsi *ucsi, u64 cmd) +{ + u32 cci; + int ret; + + ret = ucsi->ops->sync_write(ucsi, UCSI_CONTROL, &cmd, sizeof(cmd)); + if (ret) + return ret; + + ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci)); + if (ret) + return ret; + + if (cmd != UCSI_CANCEL && cci & UCSI_CCI_BUSY) + return ucsi_exec_command(ucsi, UCSI_CANCEL); + + if (!(cci & UCSI_CCI_COMMAND_COMPLETE)) + return -EIO; + + if (cci & UCSI_CCI_NOT_SUPPORTED) + return -EOPNOTSUPP; + + if (cci & UCSI_CCI_ERROR) { + if (cmd == UCSI_GET_ERROR_STATUS) + return -EIO; + return ucsi_read_error(ucsi); + } + + if (cmd == UCSI_CANCEL && cci & UCSI_CCI_CANCEL_COMPLETE) { + ret = ucsi_acknowledge_command(ucsi); + return ret ? ret : -EBUSY; + } + + return UCSI_CCI_LENGTH(cci); +} + +int ucsi_send_command(struct ucsi *ucsi, u64 command, + void *data, size_t size) +{ + u8 length; + int ret; + + mutex_lock(&ucsi->ppm_lock); + + ret = ucsi_exec_command(ucsi, command); + if (ret < 0) + goto out; + + length = ret; + + if (data) { + ret = ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, data, size); + if (ret) + goto out; + } + + ret = ucsi_acknowledge_command(ucsi); + if (ret) + goto out; + + ret = length; +out: + mutex_unlock(&ucsi->ppm_lock); + return ret; +} +EXPORT_SYMBOL_GPL(ucsi_send_command); + +/* -------------------------------------------------------------------------- */ + +struct ucsi_work { + struct delayed_work work; + struct list_head node; + unsigned long delay; + unsigned int count; + struct ucsi_connector *con; + int (*cb)(struct ucsi_connector *); +}; + +static void ucsi_poll_worker(struct work_struct *work) +{ + struct ucsi_work *uwork = container_of(work, struct ucsi_work, work.work); + struct ucsi_connector *con = uwork->con; + int ret; + + mutex_lock(&con->lock); + + if (!con->partner) { + list_del(&uwork->node); + mutex_unlock(&con->lock); + kfree(uwork); + return; + } + + ret = uwork->cb(con); + + if (uwork->count-- && (ret == -EBUSY || ret == -ETIMEDOUT)) { + queue_delayed_work(con->wq, &uwork->work, uwork->delay); + } else { + list_del(&uwork->node); + kfree(uwork); + } + + mutex_unlock(&con->lock); +} + +static int ucsi_partner_task(struct ucsi_connector *con, + int (*cb)(struct ucsi_connector *), + int retries, unsigned long delay) +{ + struct ucsi_work *uwork; + + if (!con->partner) + return 0; + + uwork = kzalloc(sizeof(*uwork), GFP_KERNEL); + if (!uwork) + return -ENOMEM; + + INIT_DELAYED_WORK(&uwork->work, ucsi_poll_worker); + uwork->count = retries; + uwork->delay = delay; + uwork->con = con; + uwork->cb = cb; + + list_add_tail(&uwork->node, &con->partner_tasks); + queue_delayed_work(con->wq, &uwork->work, delay); + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +void ucsi_altmode_update_active(struct ucsi_connector *con) +{ + const struct typec_altmode *altmode = NULL; + u64 command; + int ret; + u8 cur; + int i; + + command = UCSI_GET_CURRENT_CAM | UCSI_CONNECTOR_NUMBER(con->num); + ret = ucsi_send_command(con->ucsi, command, &cur, sizeof(cur)); + if (ret < 0) { + if (con->ucsi->version > 0x0100) { + dev_err(con->ucsi->dev, + "GET_CURRENT_CAM command failed\n"); + return; + } + cur = 0xff; + } + + if (cur < UCSI_MAX_ALTMODES) + altmode = typec_altmode_get_partner(con->port_altmode[cur]); + + for (i = 0; con->partner_altmode[i]; i++) + typec_altmode_update_active(con->partner_altmode[i], + con->partner_altmode[i] == altmode); +} + +static int ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid) +{ + u8 mode = 1; + int i; + + for (i = 0; alt[i]; i++) { + if (i > MODE_DISCOVERY_MAX) + return -ERANGE; + + if (alt[i]->svid == svid) + mode++; + } + + return mode; +} + +static int ucsi_next_altmode(struct typec_altmode **alt) +{ + int i = 0; + + for (i = 0; i < UCSI_MAX_ALTMODES; i++) + if (!alt[i]) + return i; + + return -ENOENT; +} + +static int ucsi_get_num_altmode(struct typec_altmode **alt) +{ + int i; + + for (i = 0; i < UCSI_MAX_ALTMODES; i++) + if (!alt[i]) + break; + + return i; +} + +static int ucsi_register_altmode(struct ucsi_connector *con, + struct typec_altmode_desc *desc, + u8 recipient) +{ + struct typec_altmode *alt; + bool override; + int ret; + int i; + + override = !!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_OVERRIDE); + + switch (recipient) { + case UCSI_RECIPIENT_CON: + i = ucsi_next_altmode(con->port_altmode); + if (i < 0) { + ret = i; + goto err; + } + + ret = ucsi_altmode_next_mode(con->port_altmode, desc->svid); + if (ret < 0) + return ret; + + desc->mode = ret; + + switch (desc->svid) { + case USB_TYPEC_DP_SID: + alt = ucsi_register_displayport(con, override, i, desc); + break; + case USB_TYPEC_NVIDIA_VLINK_SID: + if (desc->vdo == USB_TYPEC_NVIDIA_VLINK_DBG_VDO) + alt = typec_port_register_altmode(con->port, + desc); + else + alt = ucsi_register_displayport(con, override, + i, desc); + break; + default: + alt = typec_port_register_altmode(con->port, desc); + break; + } + + if (IS_ERR(alt)) { + ret = PTR_ERR(alt); + goto err; + } + + con->port_altmode[i] = alt; + break; + case UCSI_RECIPIENT_SOP: + i = ucsi_next_altmode(con->partner_altmode); + if (i < 0) { + ret = i; + goto err; + } + + ret = ucsi_altmode_next_mode(con->partner_altmode, desc->svid); + if (ret < 0) + return ret; + + desc->mode = ret; + + alt = typec_partner_register_altmode(con->partner, desc); + if (IS_ERR(alt)) { + ret = PTR_ERR(alt); + goto err; + } + + con->partner_altmode[i] = alt; + break; + default: + return -EINVAL; + } + + trace_ucsi_register_altmode(recipient, alt); + + return 0; + +err: + dev_err(con->ucsi->dev, "failed to registers svid 0x%04x mode %d\n", + desc->svid, desc->mode); + + return ret; +} + +static int +ucsi_register_altmodes_nvidia(struct ucsi_connector *con, u8 recipient) +{ + int max_altmodes = UCSI_MAX_ALTMODES; + struct typec_altmode_desc desc; + struct ucsi_altmode alt; + struct ucsi_altmode orig[UCSI_MAX_ALTMODES]; + struct ucsi_altmode updated[UCSI_MAX_ALTMODES]; + struct ucsi *ucsi = con->ucsi; + bool multi_dp = false; + u64 command; + int ret; + int len; + int i; + int k = 0; + + if (recipient == UCSI_RECIPIENT_CON) + max_altmodes = con->ucsi->cap.num_alt_modes; + + memset(orig, 0, sizeof(orig)); + memset(updated, 0, sizeof(updated)); + + /* First get all the alternate modes */ + for (i = 0; i < max_altmodes; i++) { + memset(&alt, 0, sizeof(alt)); + command = UCSI_GET_ALTERNATE_MODES; + command |= UCSI_GET_ALTMODE_RECIPIENT(recipient); + command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num); + command |= UCSI_GET_ALTMODE_OFFSET(i); + len = ucsi_send_command(con->ucsi, command, &alt, sizeof(alt)); + /* + * We are collecting all altmodes first and then registering. + * Some type-C device will return zero length data beyond last + * alternate modes. We should not return if length is zero. + */ + if (len < 0) + return len; + + /* We got all altmodes, now break out and register them */ + if (!len || !alt.svid) + break; + + orig[k].mid = alt.mid; + orig[k].svid = alt.svid; + k++; + } + /* + * Update the original altmode table as some ppms may report + * multiple DP altmodes. + */ + if (recipient == UCSI_RECIPIENT_CON) + multi_dp = ucsi->ops->update_altmodes(ucsi, orig, updated); + + /* now register altmodes */ + for (i = 0; i < max_altmodes; i++) { + memset(&desc, 0, sizeof(desc)); + if (multi_dp && recipient == UCSI_RECIPIENT_CON) { + desc.svid = updated[i].svid; + desc.vdo = updated[i].mid; + } else { + desc.svid = orig[i].svid; + desc.vdo = orig[i].mid; + } + desc.roles = TYPEC_PORT_DRD; + + if (!desc.svid) + return 0; + + ret = ucsi_register_altmode(con, &desc, recipient); + if (ret) + return ret; + } + + return 0; +} + +static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient) +{ + int max_altmodes = UCSI_MAX_ALTMODES; + struct typec_altmode_desc desc; + struct ucsi_altmode alt[2]; + u64 command; + int num; + int ret; + int len; + int j; + int i; + + if (!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_DETAILS)) + return 0; + + if (recipient == UCSI_RECIPIENT_SOP && con->partner_altmode[0]) + return 0; + + if (con->ucsi->ops->update_altmodes) + return ucsi_register_altmodes_nvidia(con, recipient); + + if (recipient == UCSI_RECIPIENT_CON) + max_altmodes = con->ucsi->cap.num_alt_modes; + + for (i = 0; i < max_altmodes;) { + memset(alt, 0, sizeof(alt)); + command = UCSI_GET_ALTERNATE_MODES; + command |= UCSI_GET_ALTMODE_RECIPIENT(recipient); + command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num); + command |= UCSI_GET_ALTMODE_OFFSET(i); + len = ucsi_send_command(con->ucsi, command, alt, sizeof(alt)); + if (len == -EBUSY) + continue; + if (len <= 0) + return len; + + /* + * This code is requesting one alt mode at a time, but some PPMs + * may still return two. If that happens both alt modes need be + * registered and the offset for the next alt mode has to be + * incremented. + */ + num = len / sizeof(alt[0]); + i += num; + + for (j = 0; j < num; j++) { + if (!alt[j].svid) + return 0; + + memset(&desc, 0, sizeof(desc)); + desc.vdo = alt[j].mid; + desc.svid = alt[j].svid; + desc.roles = TYPEC_PORT_DRD; + + ret = ucsi_register_altmode(con, &desc, recipient); + if (ret) + return ret; + } + } + + return 0; +} + +static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient) +{ + const struct typec_altmode *pdev; + struct typec_altmode **adev; + int i = 0; + + switch (recipient) { + case UCSI_RECIPIENT_CON: + adev = con->port_altmode; + break; + case UCSI_RECIPIENT_SOP: + adev = con->partner_altmode; + break; + default: + return; + } + + while (adev[i]) { + if (recipient == UCSI_RECIPIENT_SOP && + (adev[i]->svid == USB_TYPEC_DP_SID || + (adev[i]->svid == USB_TYPEC_NVIDIA_VLINK_SID && + adev[i]->vdo != USB_TYPEC_NVIDIA_VLINK_DBG_VDO))) { + pdev = typec_altmode_get_partner(adev[i]); + ucsi_displayport_remove_partner((void *)pdev); + } + typec_unregister_altmode(adev[i]); + adev[i++] = NULL; + } +} + +static int ucsi_read_pdos(struct ucsi_connector *con, + enum typec_role role, int is_partner, + u32 *pdos, int offset, int num_pdos) +{ + struct ucsi *ucsi = con->ucsi; + u64 command; + int ret; + + command = UCSI_COMMAND(UCSI_GET_PDOS) | UCSI_CONNECTOR_NUMBER(con->num); + command |= UCSI_GET_PDOS_PARTNER_PDO(is_partner); + command |= UCSI_GET_PDOS_PDO_OFFSET(offset); + command |= UCSI_GET_PDOS_NUM_PDOS(num_pdos - 1); + command |= is_source(role) ? UCSI_GET_PDOS_SRC_PDOS : 0; + ret = ucsi_send_command(ucsi, command, pdos + offset, + num_pdos * sizeof(u32)); + if (ret < 0 && ret != -ETIMEDOUT) + dev_err(ucsi->dev, "UCSI_GET_PDOS failed (%d)\n", ret); + + return ret; +} + +static int ucsi_get_pdos(struct ucsi_connector *con, enum typec_role role, + int is_partner, u32 *pdos) +{ + u8 num_pdos; + int ret; + + /* UCSI max payload means only getting at most 4 PDOs at a time */ + ret = ucsi_read_pdos(con, role, is_partner, pdos, 0, UCSI_MAX_PDOS); + if (ret < 0) + return ret; + + num_pdos = ret / sizeof(u32); /* number of bytes to 32-bit PDOs */ + if (num_pdos < UCSI_MAX_PDOS) + return num_pdos; + + /* get the remaining PDOs, if any */ + ret = ucsi_read_pdos(con, role, is_partner, pdos, UCSI_MAX_PDOS, + PDO_MAX_OBJECTS - UCSI_MAX_PDOS); + if (ret < 0) + return ret; + + return ret / sizeof(u32) + num_pdos; +} + +static int ucsi_get_src_pdos(struct ucsi_connector *con) +{ + int ret; + + ret = ucsi_get_pdos(con, TYPEC_SOURCE, 1, con->src_pdos); + if (ret < 0) + return ret; + + con->num_pdos = ret; + + ucsi_port_psy_changed(con); + + return ret; +} + +static int ucsi_check_altmodes(struct ucsi_connector *con) +{ + int ret, num_partner_am; + + ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP); + if (ret && ret != -ETIMEDOUT) + dev_err(con->ucsi->dev, + "con%d: failed to register partner alt modes (%d)\n", + con->num, ret); + + /* Ignoring the errors in this case. */ + if (con->partner_altmode[0]) { + num_partner_am = ucsi_get_num_altmode(con->partner_altmode); + if (num_partner_am > 0) + typec_partner_set_num_altmodes(con->partner, num_partner_am); + ucsi_altmode_update_active(con); + return 0; + } + + return ret; +} + +static int ucsi_register_partner_pdos(struct ucsi_connector *con) +{ + struct usb_power_delivery_desc desc = { con->ucsi->cap.pd_version }; + struct usb_power_delivery_capabilities_desc caps; + struct usb_power_delivery_capabilities *cap; + int ret; + + if (con->partner_pd) + return 0; + + con->partner_pd = usb_power_delivery_register(NULL, &desc); + if (IS_ERR(con->partner_pd)) + return PTR_ERR(con->partner_pd); + + ret = ucsi_get_pdos(con, TYPEC_SOURCE, 1, caps.pdo); + if (ret > 0) { + if (ret < PDO_MAX_OBJECTS) + caps.pdo[ret] = 0; + + caps.role = TYPEC_SOURCE; + cap = usb_power_delivery_register_capabilities(con->partner_pd, &caps); + if (IS_ERR(cap)) + return PTR_ERR(cap); + + con->partner_source_caps = cap; + + ret = typec_partner_set_usb_power_delivery(con->partner, con->partner_pd); + if (ret) { + usb_power_delivery_unregister_capabilities(con->partner_source_caps); + return ret; + } + } + + ret = ucsi_get_pdos(con, TYPEC_SINK, 1, caps.pdo); + if (ret > 0) { + if (ret < PDO_MAX_OBJECTS) + caps.pdo[ret] = 0; + + caps.role = TYPEC_SINK; + + cap = usb_power_delivery_register_capabilities(con->partner_pd, &caps); + if (IS_ERR(cap)) + return PTR_ERR(cap); + + con->partner_sink_caps = cap; + + ret = typec_partner_set_usb_power_delivery(con->partner, con->partner_pd); + if (ret) { + usb_power_delivery_unregister_capabilities(con->partner_sink_caps); + return ret; + } + } + + return 0; +} + +static void ucsi_unregister_partner_pdos(struct ucsi_connector *con) +{ + usb_power_delivery_unregister_capabilities(con->partner_sink_caps); + con->partner_sink_caps = NULL; + usb_power_delivery_unregister_capabilities(con->partner_source_caps); + con->partner_source_caps = NULL; + usb_power_delivery_unregister(con->partner_pd); + con->partner_pd = NULL; +} + +static void ucsi_pwr_opmode_change(struct ucsi_connector *con) +{ + switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) { + case UCSI_CONSTAT_PWR_OPMODE_PD: + con->rdo = con->status.request_data_obj; + typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_PD); + ucsi_partner_task(con, ucsi_get_src_pdos, 30, 0); + ucsi_partner_task(con, ucsi_check_altmodes, 30, 0); + ucsi_partner_task(con, ucsi_register_partner_pdos, 1, HZ); + break; + case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5: + con->rdo = 0; + typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_1_5A); + break; + case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0: + con->rdo = 0; + typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_3_0A); + break; + default: + con->rdo = 0; + typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_USB); + break; + } +} + +static int ucsi_register_partner(struct ucsi_connector *con) +{ + u8 pwr_opmode = UCSI_CONSTAT_PWR_OPMODE(con->status.flags); + struct typec_partner_desc desc; + struct typec_partner *partner; + + if (con->partner) + return 0; + + memset(&desc, 0, sizeof(desc)); + + switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) { + case UCSI_CONSTAT_PARTNER_TYPE_DEBUG: + desc.accessory = TYPEC_ACCESSORY_DEBUG; + break; + case UCSI_CONSTAT_PARTNER_TYPE_AUDIO: + desc.accessory = TYPEC_ACCESSORY_AUDIO; + break; + default: + break; + } + + desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD; + + partner = typec_register_partner(con->port, &desc); + if (IS_ERR(partner)) { + dev_err(con->ucsi->dev, + "con%d: failed to register partner (%ld)\n", con->num, + PTR_ERR(partner)); + return PTR_ERR(partner); + } + + con->partner = partner; + + return 0; +} + +static void ucsi_unregister_partner(struct ucsi_connector *con) +{ + if (!con->partner) + return; + + typec_set_mode(con->port, TYPEC_STATE_SAFE); + + typec_partner_set_usb_power_delivery(con->partner, NULL); + ucsi_unregister_partner_pdos(con); + ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP); + typec_unregister_partner(con->partner); + con->partner = NULL; +} + +static void ucsi_partner_change(struct ucsi_connector *con) +{ + enum usb_role u_role = USB_ROLE_NONE; + int ret; + + switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) { + case UCSI_CONSTAT_PARTNER_TYPE_UFP: + case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP: + u_role = USB_ROLE_HOST; + fallthrough; + case UCSI_CONSTAT_PARTNER_TYPE_CABLE: + typec_set_data_role(con->port, TYPEC_HOST); + break; + case UCSI_CONSTAT_PARTNER_TYPE_DFP: + u_role = USB_ROLE_DEVICE; + typec_set_data_role(con->port, TYPEC_DEVICE); + break; + default: + break; + } + + if (con->status.flags & UCSI_CONSTAT_CONNECTED) { + switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) { + case UCSI_CONSTAT_PARTNER_TYPE_DEBUG: + typec_set_mode(con->port, TYPEC_MODE_DEBUG); + break; + case UCSI_CONSTAT_PARTNER_TYPE_AUDIO: + typec_set_mode(con->port, TYPEC_MODE_AUDIO); + break; + default: + if (UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) == + UCSI_CONSTAT_PARTNER_FLAG_USB) + typec_set_mode(con->port, TYPEC_STATE_USB); + } + } + + /* Only notify USB controller if partner supports USB data */ + if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB)) + u_role = USB_ROLE_NONE; + + ret = usb_role_switch_set_role(con->usb_role_sw, u_role); + if (ret) + dev_err(con->ucsi->dev, "con:%d: failed to set usb role:%d\n", + con->num, u_role); +} + +static int ucsi_check_connection(struct ucsi_connector *con) +{ + u8 prev_flags = con->status.flags; + u64 command; + int ret; + + command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num); + ret = ucsi_send_command(con->ucsi, command, &con->status, sizeof(con->status)); + if (ret < 0) { + dev_err(con->ucsi->dev, "GET_CONNECTOR_STATUS failed (%d)\n", ret); + return ret; + } + + if (con->status.flags == prev_flags) + return 0; + + if (con->status.flags & UCSI_CONSTAT_CONNECTED) { + ucsi_register_partner(con); + ucsi_pwr_opmode_change(con); + ucsi_partner_change(con); + } else { + ucsi_partner_change(con); + ucsi_port_psy_changed(con); + ucsi_unregister_partner(con); + } + + return 0; +} + +static void ucsi_handle_connector_change(struct work_struct *work) +{ + struct ucsi_connector *con = container_of(work, struct ucsi_connector, + work); + struct ucsi *ucsi = con->ucsi; + enum typec_role role; + u64 command; + int ret; + + mutex_lock(&con->lock); + + command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num); + ret = ucsi_send_command(ucsi, command, &con->status, sizeof(con->status)); + if (ret < 0) { + dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n", + __func__, ret); + clear_bit(EVENT_PENDING, &con->ucsi->flags); + goto out_unlock; + } + + trace_ucsi_connector_change(con->num, &con->status); + + role = !!(con->status.flags & UCSI_CONSTAT_PWR_DIR); + + if (con->status.change & UCSI_CONSTAT_POWER_DIR_CHANGE) { + typec_set_pwr_role(con->port, role); + + /* Complete pending power role swap */ + if (!completion_done(&con->complete)) + complete(&con->complete); + } + + if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) { + typec_set_pwr_role(con->port, role); + ucsi_port_psy_changed(con); + ucsi_partner_change(con); + + if (con->status.flags & UCSI_CONSTAT_CONNECTED) { + ucsi_register_partner(con); + ucsi_partner_task(con, ucsi_check_connection, 1, HZ); + + if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == + UCSI_CONSTAT_PWR_OPMODE_PD) + ucsi_partner_task(con, ucsi_register_partner_pdos, 1, HZ); + } else { + ucsi_unregister_partner(con); + } + } + + if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE || + con->status.change & UCSI_CONSTAT_POWER_LEVEL_CHANGE) + ucsi_pwr_opmode_change(con); + + if (con->partner && con->status.change & UCSI_CONSTAT_PARTNER_CHANGE) { + ucsi_partner_change(con); + + /* Complete pending data role swap */ + if (!completion_done(&con->complete)) + complete(&con->complete); + } + + if (con->status.change & UCSI_CONSTAT_CAM_CHANGE) + ucsi_partner_task(con, ucsi_check_altmodes, 1, 0); + + clear_bit(EVENT_PENDING, &con->ucsi->flags); + + ret = ucsi_acknowledge_connector_change(ucsi); + if (ret) + dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret); + +out_unlock: + mutex_unlock(&con->lock); +} + +/** + * ucsi_connector_change - Process Connector Change Event + * @ucsi: UCSI Interface + * @num: Connector number + */ +void ucsi_connector_change(struct ucsi *ucsi, u8 num) +{ + struct ucsi_connector *con = &ucsi->connector[num - 1]; + + if (!(ucsi->ntfy & UCSI_ENABLE_NTFY_CONNECTOR_CHANGE)) { + dev_dbg(ucsi->dev, "Bogus connector change event\n"); + return; + } + + if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags)) + schedule_work(&con->work); +} +EXPORT_SYMBOL_GPL(ucsi_connector_change); + +/* -------------------------------------------------------------------------- */ + +static int ucsi_reset_connector(struct ucsi_connector *con, bool hard) +{ + u64 command; + + command = UCSI_CONNECTOR_RESET | UCSI_CONNECTOR_NUMBER(con->num); + command |= hard ? UCSI_CONNECTOR_RESET_HARD : 0; + + return ucsi_send_command(con->ucsi, command, NULL, 0); +} + +static int ucsi_reset_ppm(struct ucsi *ucsi) +{ + u64 command = UCSI_PPM_RESET; + unsigned long tmo; + u32 cci; + int ret; + + mutex_lock(&ucsi->ppm_lock); + + ret = ucsi->ops->async_write(ucsi, UCSI_CONTROL, &command, + sizeof(command)); + if (ret < 0) + goto out; + + tmo = jiffies + msecs_to_jiffies(UCSI_TIMEOUT_MS); + + do { + if (time_is_before_jiffies(tmo)) { + ret = -ETIMEDOUT; + goto out; + } + + ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci)); + if (ret) + goto out; + + /* If the PPM is still doing something else, reset it again. */ + if (cci & ~UCSI_CCI_RESET_COMPLETE) { + ret = ucsi->ops->async_write(ucsi, UCSI_CONTROL, + &command, + sizeof(command)); + if (ret < 0) + goto out; + } + + msleep(20); + } while (!(cci & UCSI_CCI_RESET_COMPLETE)); + +out: + mutex_unlock(&ucsi->ppm_lock); + return ret; +} + +static int ucsi_role_cmd(struct ucsi_connector *con, u64 command) +{ + int ret; + + ret = ucsi_send_command(con->ucsi, command, NULL, 0); + if (ret == -ETIMEDOUT) { + u64 c; + + /* PPM most likely stopped responding. Resetting everything. */ + ucsi_reset_ppm(con->ucsi); + + c = UCSI_SET_NOTIFICATION_ENABLE | con->ucsi->ntfy; + ucsi_send_command(con->ucsi, c, NULL, 0); + + ucsi_reset_connector(con, true); + } + + return ret; +} + +static int ucsi_dr_swap(struct typec_port *port, enum typec_data_role role) +{ + struct ucsi_connector *con = typec_get_drvdata(port); + u8 partner_type; + u64 command; + int ret = 0; + + mutex_lock(&con->lock); + + if (!con->partner) { + ret = -ENOTCONN; + goto out_unlock; + } + + partner_type = UCSI_CONSTAT_PARTNER_TYPE(con->status.flags); + if ((partner_type == UCSI_CONSTAT_PARTNER_TYPE_DFP && + role == TYPEC_DEVICE) || + (partner_type == UCSI_CONSTAT_PARTNER_TYPE_UFP && + role == TYPEC_HOST)) + goto out_unlock; + + reinit_completion(&con->complete); + + command = UCSI_SET_UOR | UCSI_CONNECTOR_NUMBER(con->num); + command |= UCSI_SET_UOR_ROLE(role); + command |= UCSI_SET_UOR_ACCEPT_ROLE_SWAPS; + ret = ucsi_role_cmd(con, command); + if (ret < 0) + goto out_unlock; + + mutex_unlock(&con->lock); + + if (!wait_for_completion_timeout(&con->complete, + msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) + return -ETIMEDOUT; + + return 0; + +out_unlock: + mutex_unlock(&con->lock); + + return ret; +} + +static int ucsi_pr_swap(struct typec_port *port, enum typec_role role) +{ + struct ucsi_connector *con = typec_get_drvdata(port); + enum typec_role cur_role; + u64 command; + int ret = 0; + + mutex_lock(&con->lock); + + if (!con->partner) { + ret = -ENOTCONN; + goto out_unlock; + } + + cur_role = !!(con->status.flags & UCSI_CONSTAT_PWR_DIR); + + if (cur_role == role) + goto out_unlock; + + reinit_completion(&con->complete); + + command = UCSI_SET_PDR | UCSI_CONNECTOR_NUMBER(con->num); + command |= UCSI_SET_PDR_ROLE(role); + command |= UCSI_SET_PDR_ACCEPT_ROLE_SWAPS; + ret = ucsi_role_cmd(con, command); + if (ret < 0) + goto out_unlock; + + mutex_unlock(&con->lock); + + if (!wait_for_completion_timeout(&con->complete, + msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) + return -ETIMEDOUT; + + mutex_lock(&con->lock); + + /* Something has gone wrong while swapping the role */ + if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) != + UCSI_CONSTAT_PWR_OPMODE_PD) { + ucsi_reset_connector(con, true); + ret = -EPROTO; + } + +out_unlock: + mutex_unlock(&con->lock); + + return ret; +} + +static const struct typec_operations ucsi_ops = { + .dr_set = ucsi_dr_swap, + .pr_set = ucsi_pr_swap +}; + +/* Caller must call fwnode_handle_put() after use */ +static struct fwnode_handle *ucsi_find_fwnode(struct ucsi_connector *con) +{ + struct fwnode_handle *fwnode; + int i = 1; + + device_for_each_child_node(con->ucsi->dev, fwnode) + if (i++ == con->num) + return fwnode; + return NULL; +} + +static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con) +{ + struct usb_power_delivery_desc desc = { ucsi->cap.pd_version}; + struct usb_power_delivery_capabilities_desc pd_caps; + struct usb_power_delivery_capabilities *pd_cap; + struct typec_capability *cap = &con->typec_cap; + enum typec_accessory *accessory = cap->accessory; + enum usb_role u_role = USB_ROLE_NONE; + u64 command; + char *name; + int ret; + + name = kasprintf(GFP_KERNEL, "%s-con%d", dev_name(ucsi->dev), con->num); + if (!name) + return -ENOMEM; + + con->wq = create_singlethread_workqueue(name); + kfree(name); + if (!con->wq) + return -ENOMEM; + + INIT_WORK(&con->work, ucsi_handle_connector_change); + init_completion(&con->complete); + mutex_init(&con->lock); + INIT_LIST_HEAD(&con->partner_tasks); + con->ucsi = ucsi; + + cap->fwnode = ucsi_find_fwnode(con); + con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode); + if (IS_ERR(con->usb_role_sw)) + return dev_err_probe(ucsi->dev, PTR_ERR(con->usb_role_sw), + "con%d: failed to get usb role switch\n", con->num); + + /* Delay other interactions with the con until registration is complete */ + mutex_lock(&con->lock); + + /* Get connector capability */ + command = UCSI_GET_CONNECTOR_CAPABILITY; + command |= UCSI_CONNECTOR_NUMBER(con->num); + ret = ucsi_send_command(ucsi, command, &con->cap, sizeof(con->cap)); + if (ret < 0) + goto out_unlock; + + if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DRP) + cap->data = TYPEC_PORT_DRD; + else if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DFP) + cap->data = TYPEC_PORT_DFP; + else if (con->cap.op_mode & UCSI_CONCAP_OPMODE_UFP) + cap->data = TYPEC_PORT_UFP; + + if ((con->cap.flags & UCSI_CONCAP_FLAG_PROVIDER) && + (con->cap.flags & UCSI_CONCAP_FLAG_CONSUMER)) + cap->type = TYPEC_PORT_DRP; + else if (con->cap.flags & UCSI_CONCAP_FLAG_PROVIDER) + cap->type = TYPEC_PORT_SRC; + else if (con->cap.flags & UCSI_CONCAP_FLAG_CONSUMER) + cap->type = TYPEC_PORT_SNK; + + cap->revision = ucsi->cap.typec_version; + cap->pd_revision = ucsi->cap.pd_version; + cap->svdm_version = SVDM_VER_2_0; + cap->prefer_role = TYPEC_NO_PREFERRED_ROLE; + + if (con->cap.op_mode & UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY) + *accessory++ = TYPEC_ACCESSORY_AUDIO; + if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY) + *accessory = TYPEC_ACCESSORY_DEBUG; + + cap->driver_data = con; + cap->ops = &ucsi_ops; + + ret = ucsi_register_port_psy(con); + if (ret) + goto out; + + /* Register the connector */ + con->port = typec_register_port(ucsi->dev, cap); + if (IS_ERR(con->port)) { + ret = PTR_ERR(con->port); + goto out; + } + + con->pd = usb_power_delivery_register(ucsi->dev, &desc); + + ret = ucsi_get_pdos(con, TYPEC_SOURCE, 0, pd_caps.pdo); + if (ret > 0) { + if (ret < PDO_MAX_OBJECTS) + pd_caps.pdo[ret] = 0; + + pd_caps.role = TYPEC_SOURCE; + pd_cap = usb_power_delivery_register_capabilities(con->pd, &pd_caps); + if (IS_ERR(pd_cap)) { + ret = PTR_ERR(pd_cap); + goto out; + } + + con->port_source_caps = pd_cap; + typec_port_set_usb_power_delivery(con->port, con->pd); + } + + memset(&pd_caps, 0, sizeof(pd_caps)); + ret = ucsi_get_pdos(con, TYPEC_SINK, 0, pd_caps.pdo); + if (ret > 0) { + if (ret < PDO_MAX_OBJECTS) + pd_caps.pdo[ret] = 0; + + pd_caps.role = TYPEC_SINK; + pd_cap = usb_power_delivery_register_capabilities(con->pd, &pd_caps); + if (IS_ERR(pd_cap)) { + ret = PTR_ERR(pd_cap); + goto out; + } + + con->port_sink_caps = pd_cap; + typec_port_set_usb_power_delivery(con->port, con->pd); + } + + /* Alternate modes */ + ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON); + if (ret) { + dev_err(ucsi->dev, "con%d: failed to register alt modes\n", + con->num); + goto out; + } + + /* Get the status */ + command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num); + ret = ucsi_send_command(ucsi, command, &con->status, sizeof(con->status)); + if (ret < 0) { + dev_err(ucsi->dev, "con%d: failed to get status\n", con->num); + ret = 0; + goto out; + } + ret = 0; /* ucsi_send_command() returns length on success */ + + switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) { + case UCSI_CONSTAT_PARTNER_TYPE_UFP: + case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP: + u_role = USB_ROLE_HOST; + fallthrough; + case UCSI_CONSTAT_PARTNER_TYPE_CABLE: + typec_set_data_role(con->port, TYPEC_HOST); + break; + case UCSI_CONSTAT_PARTNER_TYPE_DFP: + u_role = USB_ROLE_DEVICE; + typec_set_data_role(con->port, TYPEC_DEVICE); + break; + default: + break; + } + + /* Check if there is already something connected */ + if (con->status.flags & UCSI_CONSTAT_CONNECTED) { + typec_set_pwr_role(con->port, + !!(con->status.flags & UCSI_CONSTAT_PWR_DIR)); + ucsi_register_partner(con); + ucsi_pwr_opmode_change(con); + ucsi_port_psy_changed(con); + } + + /* Only notify USB controller if partner supports USB data */ + if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB)) + u_role = USB_ROLE_NONE; + + ret = usb_role_switch_set_role(con->usb_role_sw, u_role); + if (ret) { + dev_err(ucsi->dev, "con:%d: failed to set usb role:%d\n", + con->num, u_role); + ret = 0; + } + + if (con->partner && + UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == + UCSI_CONSTAT_PWR_OPMODE_PD) { + ucsi_get_src_pdos(con); + ucsi_check_altmodes(con); + } + + trace_ucsi_register_port(con->num, &con->status); + +out: + fwnode_handle_put(cap->fwnode); +out_unlock: + mutex_unlock(&con->lock); + + if (ret && con->wq) { + destroy_workqueue(con->wq); + con->wq = NULL; + } + + return ret; +} + +/** + * ucsi_init - Initialize UCSI interface + * @ucsi: UCSI to be initialized + * + * Registers all ports @ucsi has and enables all notification events. + */ +static int ucsi_init(struct ucsi *ucsi) +{ + struct ucsi_connector *con, *connector; + u64 command, ntfy; + int ret; + int i; + + /* Reset the PPM */ + ret = ucsi_reset_ppm(ucsi); + if (ret) { + dev_err(ucsi->dev, "failed to reset PPM!\n"); + goto err; + } + + /* Enable basic notifications */ + ntfy = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR; + command = UCSI_SET_NOTIFICATION_ENABLE | ntfy; + ret = ucsi_send_command(ucsi, command, NULL, 0); + if (ret < 0) + goto err_reset; + + /* Get PPM capabilities */ + command = UCSI_GET_CAPABILITY; + ret = ucsi_send_command(ucsi, command, &ucsi->cap, sizeof(ucsi->cap)); + if (ret < 0) + goto err_reset; + + if (!ucsi->cap.num_connectors) { + ret = -ENODEV; + goto err_reset; + } + + /* Allocate the connectors. Released in ucsi_unregister() */ + connector = kcalloc(ucsi->cap.num_connectors + 1, sizeof(*connector), GFP_KERNEL); + if (!connector) { + ret = -ENOMEM; + goto err_reset; + } + + /* Register all connectors */ + for (i = 0; i < ucsi->cap.num_connectors; i++) { + connector[i].num = i + 1; + ret = ucsi_register_port(ucsi, &connector[i]); + if (ret) + goto err_unregister; + } + + /* Enable all notifications */ + ntfy = UCSI_ENABLE_NTFY_ALL; + command = UCSI_SET_NOTIFICATION_ENABLE | ntfy; + ret = ucsi_send_command(ucsi, command, NULL, 0); + if (ret < 0) + goto err_unregister; + + ucsi->connector = connector; + ucsi->ntfy = ntfy; + return 0; + +err_unregister: + for (con = connector; con->port; con++) { + ucsi_unregister_partner(con); + ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON); + ucsi_unregister_port_psy(con); + if (con->wq) + destroy_workqueue(con->wq); + + usb_power_delivery_unregister_capabilities(con->port_sink_caps); + con->port_sink_caps = NULL; + usb_power_delivery_unregister_capabilities(con->port_source_caps); + con->port_source_caps = NULL; + usb_power_delivery_unregister(con->pd); + con->pd = NULL; + typec_unregister_port(con->port); + con->port = NULL; + } + kfree(connector); +err_reset: + memset(&ucsi->cap, 0, sizeof(ucsi->cap)); + ucsi_reset_ppm(ucsi); +err: + return ret; +} + +static void ucsi_resume_work(struct work_struct *work) +{ + struct ucsi *ucsi = container_of(work, struct ucsi, resume_work); + struct ucsi_connector *con; + u64 command; + int ret; + + /* Restore UCSI notification enable mask after system resume */ + command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy; + ret = ucsi_send_command(ucsi, command, NULL, 0); + if (ret < 0) { + dev_err(ucsi->dev, "failed to re-enable notifications (%d)\n", ret); + return; + } + + for (con = ucsi->connector; con->port; con++) { + mutex_lock(&con->lock); + ucsi_partner_task(con, ucsi_check_connection, 1, 0); + mutex_unlock(&con->lock); + } +} + +int ucsi_resume(struct ucsi *ucsi) +{ + if (ucsi->connector) + queue_work(system_long_wq, &ucsi->resume_work); + return 0; +} +EXPORT_SYMBOL_GPL(ucsi_resume); + +static void ucsi_init_work(struct work_struct *work) +{ + struct ucsi *ucsi = container_of(work, struct ucsi, work.work); + int ret; + + ret = ucsi_init(ucsi); + if (ret) + dev_err_probe(ucsi->dev, ret, "PPM init failed\n"); + + if (ret == -EPROBE_DEFER) { + if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT) { + dev_err(ucsi->dev, "PPM init failed, stop trying\n"); + return; + } + + queue_delayed_work(system_long_wq, &ucsi->work, + UCSI_ROLE_SWITCH_INTERVAL); + } +} + +/** + * ucsi_get_drvdata - Return private driver data pointer + * @ucsi: UCSI interface + */ +void *ucsi_get_drvdata(struct ucsi *ucsi) +{ + return ucsi->driver_data; +} +EXPORT_SYMBOL_GPL(ucsi_get_drvdata); + +/** + * ucsi_set_drvdata - Assign private driver data pointer + * @ucsi: UCSI interface + * @data: Private data pointer + */ +void ucsi_set_drvdata(struct ucsi *ucsi, void *data) +{ + ucsi->driver_data = data; +} +EXPORT_SYMBOL_GPL(ucsi_set_drvdata); + +/** + * ucsi_create - Allocate UCSI instance + * @dev: Device interface to the PPM (Platform Policy Manager) + * @ops: I/O routines + */ +struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops) +{ + struct ucsi *ucsi; + + if (!ops || !ops->read || !ops->sync_write || !ops->async_write) + return ERR_PTR(-EINVAL); + + ucsi = kzalloc(sizeof(*ucsi), GFP_KERNEL); + if (!ucsi) + return ERR_PTR(-ENOMEM); + + INIT_WORK(&ucsi->resume_work, ucsi_resume_work); + INIT_DELAYED_WORK(&ucsi->work, ucsi_init_work); + mutex_init(&ucsi->ppm_lock); + ucsi->dev = dev; + ucsi->ops = ops; + + return ucsi; +} +EXPORT_SYMBOL_GPL(ucsi_create); + +/** + * ucsi_destroy - Free UCSI instance + * @ucsi: UCSI instance to be freed + */ +void ucsi_destroy(struct ucsi *ucsi) +{ + ucsi_debugfs_unregister(ucsi); + kfree(ucsi); +} +EXPORT_SYMBOL_GPL(ucsi_destroy); + +/** + * ucsi_register - Register UCSI interface + * @ucsi: UCSI instance + */ +int ucsi_register(struct ucsi *ucsi) +{ + int ret; + + ret = ucsi->ops->read(ucsi, UCSI_VERSION, &ucsi->version, + sizeof(ucsi->version)); + if (ret) + return ret; + + if (!ucsi->version) + return -ENODEV; + + queue_delayed_work(system_long_wq, &ucsi->work, 0); + + ucsi_debugfs_register(ucsi); + return 0; +} +EXPORT_SYMBOL_GPL(ucsi_register); + +/** + * ucsi_unregister - Unregister UCSI interface + * @ucsi: UCSI interface to be unregistered + * + * Unregister UCSI interface that was created with ucsi_register(). + */ +void ucsi_unregister(struct ucsi *ucsi) +{ + u64 cmd = UCSI_SET_NOTIFICATION_ENABLE; + int i; + + /* Make sure that we are not in the middle of driver initialization */ + cancel_delayed_work_sync(&ucsi->work); + cancel_work_sync(&ucsi->resume_work); + + /* Disable notifications */ + ucsi->ops->async_write(ucsi, UCSI_CONTROL, &cmd, sizeof(cmd)); + + if (!ucsi->connector) + return; + + for (i = 0; i < ucsi->cap.num_connectors; i++) { + cancel_work_sync(&ucsi->connector[i].work); + ucsi_unregister_partner(&ucsi->connector[i]); + ucsi_unregister_altmodes(&ucsi->connector[i], + UCSI_RECIPIENT_CON); + ucsi_unregister_port_psy(&ucsi->connector[i]); + + if (ucsi->connector[i].wq) { + struct ucsi_work *uwork; + + mutex_lock(&ucsi->connector[i].lock); + /* + * queue delayed items immediately so they can execute + * and free themselves before the wq is destroyed + */ + list_for_each_entry(uwork, &ucsi->connector[i].partner_tasks, node) + mod_delayed_work(ucsi->connector[i].wq, &uwork->work, 0); + mutex_unlock(&ucsi->connector[i].lock); + destroy_workqueue(ucsi->connector[i].wq); + } + + usb_power_delivery_unregister_capabilities(ucsi->connector[i].port_sink_caps); + ucsi->connector[i].port_sink_caps = NULL; + usb_power_delivery_unregister_capabilities(ucsi->connector[i].port_source_caps); + ucsi->connector[i].port_source_caps = NULL; + usb_power_delivery_unregister(ucsi->connector[i].pd); + ucsi->connector[i].pd = NULL; + typec_unregister_port(ucsi->connector[i].port); + } + + kfree(ucsi->connector); +} +EXPORT_SYMBOL_GPL(ucsi_unregister); + +static int __init ucsi_module_init(void) +{ + ucsi_debugfs_init(); + return 0; +} +module_init(ucsi_module_init); + +static void __exit ucsi_module_exit(void) +{ + ucsi_debugfs_exit(); +} +module_exit(ucsi_module_exit); + +MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("USB Type-C Connector System Software Interface driver"); diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h new file mode 100644 index 0000000000..474315a72c --- /dev/null +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -0,0 +1,422 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __DRIVER_USB_TYPEC_UCSI_H +#define __DRIVER_USB_TYPEC_UCSI_H + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/power_supply.h> +#include <linux/types.h> +#include <linux/usb/typec.h> +#include <linux/usb/pd.h> +#include <linux/usb/role.h> + +/* -------------------------------------------------------------------------- */ + +struct ucsi; +struct ucsi_altmode; +struct dentry; + +/* UCSI offsets (Bytes) */ +#define UCSI_VERSION 0 +#define UCSI_CCI 4 +#define UCSI_CONTROL 8 +#define UCSI_MESSAGE_IN 16 +#define UCSI_MESSAGE_OUT 32 + +/* Command Status and Connector Change Indication (CCI) bits */ +#define UCSI_CCI_CONNECTOR(_c_) (((_c_) & GENMASK(7, 1)) >> 1) +#define UCSI_CCI_LENGTH(_c_) (((_c_) & GENMASK(15, 8)) >> 8) +#define UCSI_CCI_NOT_SUPPORTED BIT(25) +#define UCSI_CCI_CANCEL_COMPLETE BIT(26) +#define UCSI_CCI_RESET_COMPLETE BIT(27) +#define UCSI_CCI_BUSY BIT(28) +#define UCSI_CCI_ACK_COMPLETE BIT(29) +#define UCSI_CCI_ERROR BIT(30) +#define UCSI_CCI_COMMAND_COMPLETE BIT(31) + +/** + * struct ucsi_operations - UCSI I/O operations + * @read: Read operation + * @sync_write: Blocking write operation + * @async_write: Non-blocking write operation + * @update_altmodes: Squashes duplicate DP altmodes + * + * Read and write routines for UCSI interface. @sync_write must wait for the + * Command Completion Event from the PPM before returning, and @async_write must + * return immediately after sending the data to the PPM. + */ +struct ucsi_operations { + int (*read)(struct ucsi *ucsi, unsigned int offset, + void *val, size_t val_len); + int (*sync_write)(struct ucsi *ucsi, unsigned int offset, + const void *val, size_t val_len); + int (*async_write)(struct ucsi *ucsi, unsigned int offset, + const void *val, size_t val_len); + bool (*update_altmodes)(struct ucsi *ucsi, struct ucsi_altmode *orig, + struct ucsi_altmode *updated); +}; + +struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops); +void ucsi_destroy(struct ucsi *ucsi); +int ucsi_register(struct ucsi *ucsi); +void ucsi_unregister(struct ucsi *ucsi); +void *ucsi_get_drvdata(struct ucsi *ucsi); +void ucsi_set_drvdata(struct ucsi *ucsi, void *data); + +void ucsi_connector_change(struct ucsi *ucsi, u8 num); + +/* -------------------------------------------------------------------------- */ + +/* Commands */ +#define UCSI_PPM_RESET 0x01 +#define UCSI_CANCEL 0x02 +#define UCSI_CONNECTOR_RESET 0x03 +#define UCSI_ACK_CC_CI 0x04 +#define UCSI_SET_NOTIFICATION_ENABLE 0x05 +#define UCSI_GET_CAPABILITY 0x06 +#define UCSI_GET_CONNECTOR_CAPABILITY 0x07 +#define UCSI_SET_UOM 0x08 +#define UCSI_SET_UOR 0x09 +#define UCSI_SET_PDM 0x0a +#define UCSI_SET_PDR 0x0b +#define UCSI_GET_ALTERNATE_MODES 0x0c +#define UCSI_GET_CAM_SUPPORTED 0x0d +#define UCSI_GET_CURRENT_CAM 0x0e +#define UCSI_SET_NEW_CAM 0x0f +#define UCSI_GET_PDOS 0x10 +#define UCSI_GET_CABLE_PROPERTY 0x11 +#define UCSI_GET_CONNECTOR_STATUS 0x12 +#define UCSI_GET_ERROR_STATUS 0x13 + +#define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16) +#define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff) + +/* CONNECTOR_RESET command bits */ +#define UCSI_CONNECTOR_RESET_HARD BIT(23) /* Deprecated in v1.1 */ + +/* ACK_CC_CI bits */ +#define UCSI_ACK_CONNECTOR_CHANGE BIT(16) +#define UCSI_ACK_COMMAND_COMPLETE BIT(17) + +/* SET_NOTIFICATION_ENABLE command bits */ +#define UCSI_ENABLE_NTFY_CMD_COMPLETE BIT(16) +#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE BIT(17) +#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE BIT(18) +#define UCSI_ENABLE_NTFY_CAP_CHANGE BIT(21) +#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE BIT(22) +#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE BIT(23) +#define UCSI_ENABLE_NTFY_CAM_CHANGE BIT(24) +#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE BIT(25) +#define UCSI_ENABLE_NTFY_PARTNER_CHANGE BIT(27) +#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE BIT(28) +#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE BIT(30) +#define UCSI_ENABLE_NTFY_ERROR BIT(31) +#define UCSI_ENABLE_NTFY_ALL 0xdbe70000 + +/* SET_UOR command bits */ +#define UCSI_SET_UOR_ROLE(_r_) (((_r_) == TYPEC_HOST ? 1 : 2) << 23) +#define UCSI_SET_UOR_ACCEPT_ROLE_SWAPS BIT(25) + +/* SET_PDF command bits */ +#define UCSI_SET_PDR_ROLE(_r_) (((_r_) == TYPEC_SOURCE ? 1 : 2) << 23) +#define UCSI_SET_PDR_ACCEPT_ROLE_SWAPS BIT(25) + +/* GET_ALTERNATE_MODES command bits */ +#define UCSI_ALTMODE_RECIPIENT(_r_) (((_r_) >> 16) & 0x7) +#define UCSI_GET_ALTMODE_RECIPIENT(_r_) ((u64)(_r_) << 16) +#define UCSI_RECIPIENT_CON 0 +#define UCSI_RECIPIENT_SOP 1 +#define UCSI_RECIPIENT_SOP_P 2 +#define UCSI_RECIPIENT_SOP_PP 3 +#define UCSI_GET_ALTMODE_CONNECTOR_NUMBER(_r_) ((u64)(_r_) << 24) +#define UCSI_ALTMODE_OFFSET(_r_) (((_r_) >> 32) & 0xff) +#define UCSI_GET_ALTMODE_OFFSET(_r_) ((u64)(_r_) << 32) +#define UCSI_GET_ALTMODE_NUM_ALTMODES(_r_) ((u64)(_r_) << 40) + +/* GET_PDOS command bits */ +#define UCSI_GET_PDOS_PARTNER_PDO(_r_) ((u64)(_r_) << 23) +#define UCSI_GET_PDOS_PDO_OFFSET(_r_) ((u64)(_r_) << 24) +#define UCSI_GET_PDOS_NUM_PDOS(_r_) ((u64)(_r_) << 32) +#define UCSI_MAX_PDOS (4) +#define UCSI_GET_PDOS_SRC_PDOS ((u64)1 << 34) + +/* -------------------------------------------------------------------------- */ + +/* Error information returned by PPM in response to GET_ERROR_STATUS command. */ +#define UCSI_ERROR_UNREGONIZED_CMD BIT(0) +#define UCSI_ERROR_INVALID_CON_NUM BIT(1) +#define UCSI_ERROR_INVALID_CMD_ARGUMENT BIT(2) +#define UCSI_ERROR_INCOMPATIBLE_PARTNER BIT(3) +#define UCSI_ERROR_CC_COMMUNICATION_ERR BIT(4) +#define UCSI_ERROR_DEAD_BATTERY BIT(5) +#define UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL BIT(6) +#define UCSI_ERROR_OVERCURRENT BIT(7) +#define UCSI_ERROR_UNDEFINED BIT(8) +#define UCSI_ERROR_PARTNER_REJECTED_SWAP BIT(9) +#define UCSI_ERROR_HARD_RESET BIT(10) +#define UCSI_ERROR_PPM_POLICY_CONFLICT BIT(11) +#define UCSI_ERROR_SWAP_REJECTED BIT(12) + +#define UCSI_SET_NEW_CAM_ENTER(x) (((x) >> 23) & 0x1) +#define UCSI_SET_NEW_CAM_GET_AM(x) (((x) >> 24) & 0xff) +#define UCSI_SET_NEW_CAM_AM_MASK (0xff << 24) +#define UCSI_SET_NEW_CAM_SET_AM(x) (((x) & 0xff) << 24) +#define UCSI_CMD_CONNECTOR_MASK (0x7) + +/* Data structure filled by PPM in response to GET_CAPABILITY command. */ +struct ucsi_capability { + u32 attributes; +#define UCSI_CAP_ATTR_DISABLE_STATE BIT(0) +#define UCSI_CAP_ATTR_BATTERY_CHARGING BIT(1) +#define UCSI_CAP_ATTR_USB_PD BIT(2) +#define UCSI_CAP_ATTR_TYPEC_CURRENT BIT(6) +#define UCSI_CAP_ATTR_POWER_AC_SUPPLY BIT(8) +#define UCSI_CAP_ATTR_POWER_OTHER BIT(10) +#define UCSI_CAP_ATTR_POWER_VBUS BIT(14) + u8 num_connectors; + u8 features; +#define UCSI_CAP_SET_UOM BIT(0) +#define UCSI_CAP_SET_PDM BIT(1) +#define UCSI_CAP_ALT_MODE_DETAILS BIT(2) +#define UCSI_CAP_ALT_MODE_OVERRIDE BIT(3) +#define UCSI_CAP_PDO_DETAILS BIT(4) +#define UCSI_CAP_CABLE_DETAILS BIT(5) +#define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS BIT(6) +#define UCSI_CAP_PD_RESET BIT(7) + u16 reserved_1; + u8 num_alt_modes; + u8 reserved_2; + u16 bc_version; + u16 pd_version; + u16 typec_version; +} __packed; + +/* Data structure filled by PPM in response to GET_CONNECTOR_CAPABILITY cmd. */ +struct ucsi_connector_capability { + u8 op_mode; +#define UCSI_CONCAP_OPMODE_DFP BIT(0) +#define UCSI_CONCAP_OPMODE_UFP BIT(1) +#define UCSI_CONCAP_OPMODE_DRP BIT(2) +#define UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY BIT(3) +#define UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY BIT(4) +#define UCSI_CONCAP_OPMODE_USB2 BIT(5) +#define UCSI_CONCAP_OPMODE_USB3 BIT(6) +#define UCSI_CONCAP_OPMODE_ALT_MODE BIT(7) + u8 flags; +#define UCSI_CONCAP_FLAG_PROVIDER BIT(0) +#define UCSI_CONCAP_FLAG_CONSUMER BIT(1) +} __packed; + +struct ucsi_altmode { + u16 svid; + u32 mid; +} __packed; + +/* Data structure filled by PPM in response to GET_CABLE_PROPERTY command. */ +struct ucsi_cable_property { + u16 speed_supported; + u8 current_capability; + u8 flags; +#define UCSI_CABLE_PROP_FLAG_VBUS_IN_CABLE BIT(0) +#define UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE BIT(1) +#define UCSI_CABLE_PROP_FLAG_DIRECTIONALITY BIT(2) +#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_) ((_f_) & GENMASK(3, 0)) +#define UCSI_CABLE_PROPERTY_PLUG_TYPE_A 0 +#define UCSI_CABLE_PROPERTY_PLUG_TYPE_B 1 +#define UCSI_CABLE_PROPERTY_PLUG_TYPE_C 2 +#define UCSI_CABLE_PROPERTY_PLUG_OTHER 3 +#define UCSI_CABLE_PROP_MODE_SUPPORT BIT(5) + u8 latency; +} __packed; + +/* Data structure filled by PPM in response to GET_CONNECTOR_STATUS command. */ +struct ucsi_connector_status { + u16 change; +#define UCSI_CONSTAT_EXT_SUPPLY_CHANGE BIT(1) +#define UCSI_CONSTAT_POWER_OPMODE_CHANGE BIT(2) +#define UCSI_CONSTAT_PDOS_CHANGE BIT(5) +#define UCSI_CONSTAT_POWER_LEVEL_CHANGE BIT(6) +#define UCSI_CONSTAT_PD_RESET_COMPLETE BIT(7) +#define UCSI_CONSTAT_CAM_CHANGE BIT(8) +#define UCSI_CONSTAT_BC_CHANGE BIT(9) +#define UCSI_CONSTAT_PARTNER_CHANGE BIT(11) +#define UCSI_CONSTAT_POWER_DIR_CHANGE BIT(12) +#define UCSI_CONSTAT_CONNECT_CHANGE BIT(14) +#define UCSI_CONSTAT_ERROR BIT(15) + u16 flags; +#define UCSI_CONSTAT_PWR_OPMODE(_f_) ((_f_) & GENMASK(2, 0)) +#define UCSI_CONSTAT_PWR_OPMODE_NONE 0 +#define UCSI_CONSTAT_PWR_OPMODE_DEFAULT 1 +#define UCSI_CONSTAT_PWR_OPMODE_BC 2 +#define UCSI_CONSTAT_PWR_OPMODE_PD 3 +#define UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5 4 +#define UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0 5 +#define UCSI_CONSTAT_CONNECTED BIT(3) +#define UCSI_CONSTAT_PWR_DIR BIT(4) +#define UCSI_CONSTAT_PARTNER_FLAGS(_f_) (((_f_) & GENMASK(12, 5)) >> 5) +#define UCSI_CONSTAT_PARTNER_FLAG_USB 1 +#define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE 2 +#define UCSI_CONSTAT_PARTNER_TYPE(_f_) (((_f_) & GENMASK(15, 13)) >> 13) +#define UCSI_CONSTAT_PARTNER_TYPE_DFP 1 +#define UCSI_CONSTAT_PARTNER_TYPE_UFP 2 +#define UCSI_CONSTAT_PARTNER_TYPE_CABLE 3 /* Powered Cable */ +#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP 4 /* Powered Cable */ +#define UCSI_CONSTAT_PARTNER_TYPE_DEBUG 5 +#define UCSI_CONSTAT_PARTNER_TYPE_AUDIO 6 + u32 request_data_obj; + u8 pwr_status; +#define UCSI_CONSTAT_BC_STATUS(_p_) ((_p_) & GENMASK(2, 0)) +#define UCSI_CONSTAT_BC_NOT_CHARGING 0 +#define UCSI_CONSTAT_BC_NOMINAL_CHARGING 1 +#define UCSI_CONSTAT_BC_SLOW_CHARGING 2 +#define UCSI_CONSTAT_BC_TRICKLE_CHARGING 3 +#define UCSI_CONSTAT_PROVIDER_CAP_LIMIT(_p_) (((_p_) & GENMASK(6, 3)) >> 3) +#define UCSI_CONSTAT_CAP_PWR_LOWERED 0 +#define UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT 1 +} __packed; + +/* -------------------------------------------------------------------------- */ + +struct ucsi_debugfs_entry { + u64 command; + struct ucsi_data { + u64 low; + u64 high; + } response; + u32 status; + struct dentry *dentry; +}; + +struct ucsi { + u16 version; + struct device *dev; + struct driver_data *driver_data; + + const struct ucsi_operations *ops; + + struct ucsi_capability cap; + struct ucsi_connector *connector; + struct ucsi_debugfs_entry *debugfs; + + struct work_struct resume_work; + struct delayed_work work; + int work_count; +#define UCSI_ROLE_SWITCH_RETRY_PER_HZ 10 +#define UCSI_ROLE_SWITCH_INTERVAL (HZ / UCSI_ROLE_SWITCH_RETRY_PER_HZ) +#define UCSI_ROLE_SWITCH_WAIT_COUNT (10 * UCSI_ROLE_SWITCH_RETRY_PER_HZ) + + /* PPM Communication lock */ + struct mutex ppm_lock; + + /* The latest "Notification Enable" bits (SET_NOTIFICATION_ENABLE) */ + u64 ntfy; + + /* PPM communication flags */ + unsigned long flags; +#define EVENT_PENDING 0 +#define COMMAND_PENDING 1 +#define ACK_PENDING 2 +}; + +#define UCSI_MAX_SVID 5 +#define UCSI_MAX_ALTMODES (UCSI_MAX_SVID * 6) + +#define UCSI_TYPEC_VSAFE5V 5000 +#define UCSI_TYPEC_1_5_CURRENT 1500 +#define UCSI_TYPEC_3_0_CURRENT 3000 + +struct ucsi_connector { + int num; + + struct ucsi *ucsi; + struct mutex lock; /* port lock */ + struct work_struct work; + struct completion complete; + struct workqueue_struct *wq; + struct list_head partner_tasks; + + struct typec_port *port; + struct typec_partner *partner; + + struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES]; + struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES]; + + struct typec_capability typec_cap; + + struct ucsi_connector_status status; + struct ucsi_connector_capability cap; + struct power_supply *psy; + struct power_supply_desc psy_desc; + u32 rdo; + u32 src_pdos[PDO_MAX_OBJECTS]; + int num_pdos; + + /* USB PD objects */ + struct usb_power_delivery *pd; + struct usb_power_delivery_capabilities *port_source_caps; + struct usb_power_delivery_capabilities *port_sink_caps; + struct usb_power_delivery *partner_pd; + struct usb_power_delivery_capabilities *partner_source_caps; + struct usb_power_delivery_capabilities *partner_sink_caps; + + struct usb_role_switch *usb_role_sw; +}; + +int ucsi_send_command(struct ucsi *ucsi, u64 command, + void *retval, size_t size); + +void ucsi_altmode_update_active(struct ucsi_connector *con); +int ucsi_resume(struct ucsi *ucsi); + +#if IS_ENABLED(CONFIG_POWER_SUPPLY) +int ucsi_register_port_psy(struct ucsi_connector *con); +void ucsi_unregister_port_psy(struct ucsi_connector *con); +void ucsi_port_psy_changed(struct ucsi_connector *con); +#else +static inline int ucsi_register_port_psy(struct ucsi_connector *con) { return 0; } +static inline void ucsi_unregister_port_psy(struct ucsi_connector *con) { } +static inline void ucsi_port_psy_changed(struct ucsi_connector *con) { } +#endif /* CONFIG_POWER_SUPPLY */ + +#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE) +struct typec_altmode * +ucsi_register_displayport(struct ucsi_connector *con, + bool override, int offset, + struct typec_altmode_desc *desc); + +void ucsi_displayport_remove_partner(struct typec_altmode *adev); + +#else +static inline struct typec_altmode * +ucsi_register_displayport(struct ucsi_connector *con, + bool override, int offset, + struct typec_altmode_desc *desc) +{ + return NULL; +} + +static inline void +ucsi_displayport_remove_partner(struct typec_altmode *adev) { } +#endif /* CONFIG_TYPEC_DP_ALTMODE */ + +#ifdef CONFIG_DEBUG_FS +void ucsi_debugfs_init(void); +void ucsi_debugfs_exit(void); +void ucsi_debugfs_register(struct ucsi *ucsi); +void ucsi_debugfs_unregister(struct ucsi *ucsi); +#else +static inline void ucsi_debugfs_init(void) { } +static inline void ucsi_debugfs_exit(void) { } +static inline void ucsi_debugfs_register(struct ucsi *ucsi) { } +static inline void ucsi_debugfs_unregister(struct ucsi *ucsi) { } +#endif /* CONFIG_DEBUG_FS */ + +/* + * NVIDIA VirtualLink (svid 0x955) has two altmode. VirtualLink + * DP mode with vdo=0x1 and NVIDIA test mode with vdo=0x3 + */ +#define USB_TYPEC_NVIDIA_VLINK_DP_VDO 0x1 +#define USB_TYPEC_NVIDIA_VLINK_DBG_VDO 0x3 + +#endif /* __DRIVER_USB_TYPEC_UCSI_H */ diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c new file mode 100644 index 0000000000..6bbf490ac4 --- /dev/null +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UCSI ACPI driver + * + * Copyright (C) 2017, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/dmi.h> + +#include "ucsi.h" + +#define UCSI_DSM_UUID "6f8398c2-7ca4-11e4-ad36-631042b5008f" +#define UCSI_DSM_FUNC_WRITE 1 +#define UCSI_DSM_FUNC_READ 2 + +struct ucsi_acpi { + struct device *dev; + struct ucsi *ucsi; + void *base; + struct completion complete; + unsigned long flags; + guid_t guid; + u64 cmd; +}; + +static int ucsi_acpi_dsm(struct ucsi_acpi *ua, int func) +{ + union acpi_object *obj; + + obj = acpi_evaluate_dsm(ACPI_HANDLE(ua->dev), &ua->guid, 1, func, + NULL); + if (!obj) { + dev_err(ua->dev, "%s: failed to evaluate _DSM %d\n", + __func__, func); + return -EIO; + } + + ACPI_FREE(obj); + return 0; +} + +static int ucsi_acpi_read(struct ucsi *ucsi, unsigned int offset, + void *val, size_t val_len) +{ + struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); + int ret; + + ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ); + if (ret) + return ret; + + memcpy(val, ua->base + offset, val_len); + + return 0; +} + +static int ucsi_acpi_async_write(struct ucsi *ucsi, unsigned int offset, + const void *val, size_t val_len) +{ + struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); + + memcpy(ua->base + offset, val, val_len); + ua->cmd = *(u64 *)val; + + return ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_WRITE); +} + +static int ucsi_acpi_sync_write(struct ucsi *ucsi, unsigned int offset, + const void *val, size_t val_len) +{ + struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); + int ret; + + set_bit(COMMAND_PENDING, &ua->flags); + + ret = ucsi_acpi_async_write(ucsi, offset, val, val_len); + if (ret) + goto out_clear_bit; + + if (!wait_for_completion_timeout(&ua->complete, 5 * HZ)) + ret = -ETIMEDOUT; + +out_clear_bit: + clear_bit(COMMAND_PENDING, &ua->flags); + + return ret; +} + +static const struct ucsi_operations ucsi_acpi_ops = { + .read = ucsi_acpi_read, + .sync_write = ucsi_acpi_sync_write, + .async_write = ucsi_acpi_async_write +}; + +static int +ucsi_zenbook_read(struct ucsi *ucsi, unsigned int offset, void *val, size_t val_len) +{ + struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); + int ret; + + if (offset == UCSI_VERSION || UCSI_COMMAND(ua->cmd) == UCSI_PPM_RESET) { + ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ); + if (ret) + return ret; + } + + memcpy(val, ua->base + offset, val_len); + + return 0; +} + +static const struct ucsi_operations ucsi_zenbook_ops = { + .read = ucsi_zenbook_read, + .sync_write = ucsi_acpi_sync_write, + .async_write = ucsi_acpi_async_write +}; + +static const struct dmi_system_id zenbook_dmi_id[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"), + }, + }, + { } +}; + +static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data) +{ + struct ucsi_acpi *ua = data; + u32 cci; + int ret; + + ret = ua->ucsi->ops->read(ua->ucsi, UCSI_CCI, &cci, sizeof(cci)); + if (ret) + return; + + if (UCSI_CCI_CONNECTOR(cci)) + ucsi_connector_change(ua->ucsi, UCSI_CCI_CONNECTOR(cci)); + + if (test_bit(COMMAND_PENDING, &ua->flags) && + cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE)) + complete(&ua->complete); +} + +static int ucsi_acpi_probe(struct platform_device *pdev) +{ + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + const struct ucsi_operations *ops = &ucsi_acpi_ops; + struct ucsi_acpi *ua; + struct resource *res; + acpi_status status; + int ret; + + if (adev->dep_unmet) + return -EPROBE_DEFER; + + ua = devm_kzalloc(&pdev->dev, sizeof(*ua), GFP_KERNEL); + if (!ua) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing memory resource\n"); + return -ENODEV; + } + + ua->base = devm_memremap(&pdev->dev, res->start, resource_size(res), MEMREMAP_WB); + if (IS_ERR(ua->base)) + return PTR_ERR(ua->base); + + ret = guid_parse(UCSI_DSM_UUID, &ua->guid); + if (ret) + return ret; + + init_completion(&ua->complete); + ua->dev = &pdev->dev; + + if (dmi_check_system(zenbook_dmi_id)) + ops = &ucsi_zenbook_ops; + + ua->ucsi = ucsi_create(&pdev->dev, ops); + if (IS_ERR(ua->ucsi)) + return PTR_ERR(ua->ucsi); + + ucsi_set_drvdata(ua->ucsi, ua); + + status = acpi_install_notify_handler(ACPI_HANDLE(&pdev->dev), + ACPI_DEVICE_NOTIFY, + ucsi_acpi_notify, ua); + if (ACPI_FAILURE(status)) { + dev_err(&pdev->dev, "failed to install notify handler\n"); + ucsi_destroy(ua->ucsi); + return -ENODEV; + } + + ret = ucsi_register(ua->ucsi); + if (ret) { + acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev), + ACPI_DEVICE_NOTIFY, + ucsi_acpi_notify); + ucsi_destroy(ua->ucsi); + return ret; + } + + platform_set_drvdata(pdev, ua); + + return 0; +} + +static void ucsi_acpi_remove(struct platform_device *pdev) +{ + struct ucsi_acpi *ua = platform_get_drvdata(pdev); + + ucsi_unregister(ua->ucsi); + ucsi_destroy(ua->ucsi); + + acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev), ACPI_DEVICE_NOTIFY, + ucsi_acpi_notify); +} + +static int ucsi_acpi_resume(struct device *dev) +{ + struct ucsi_acpi *ua = dev_get_drvdata(dev); + + return ucsi_resume(ua->ucsi); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(ucsi_acpi_pm_ops, NULL, ucsi_acpi_resume); + +static const struct acpi_device_id ucsi_acpi_match[] = { + { "PNP0CA0", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, ucsi_acpi_match); + +static struct platform_driver ucsi_acpi_platform_driver = { + .driver = { + .name = "ucsi_acpi", + .pm = pm_ptr(&ucsi_acpi_pm_ops), + .acpi_match_table = ACPI_PTR(ucsi_acpi_match), + }, + .probe = ucsi_acpi_probe, + .remove_new = ucsi_acpi_remove, +}; + +module_platform_driver(ucsi_acpi_platform_driver); + +MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("UCSI ACPI driver"); diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c new file mode 100644 index 0000000000..607061a37e --- /dev/null +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -0,0 +1,1507 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UCSI driver for Cypress CCGx Type-C controller + * + * Copyright (C) 2017-2018 NVIDIA Corporation. All rights reserved. + * Author: Ajay Gupta <ajayg@nvidia.com> + * + * Some code borrowed from drivers/usb/typec/ucsi/ucsi_acpi.c + */ +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/usb/typec_dp.h> + +#include <asm/unaligned.h> +#include "ucsi.h" + +enum enum_fw_mode { + BOOT, /* bootloader */ + FW1, /* FW partition-1 (contains secondary fw) */ + FW2, /* FW partition-2 (contains primary fw) */ + FW_INVALID, +}; + +#define CCGX_RAB_DEVICE_MODE 0x0000 +#define CCGX_RAB_INTR_REG 0x0006 +#define DEV_INT BIT(0) +#define PORT0_INT BIT(1) +#define PORT1_INT BIT(2) +#define UCSI_READ_INT BIT(7) +#define CCGX_RAB_JUMP_TO_BOOT 0x0007 +#define TO_BOOT 'J' +#define TO_ALT_FW 'A' +#define CCGX_RAB_RESET_REQ 0x0008 +#define RESET_SIG 'R' +#define CMD_RESET_I2C 0x0 +#define CMD_RESET_DEV 0x1 +#define CCGX_RAB_ENTER_FLASHING 0x000A +#define FLASH_ENTER_SIG 'P' +#define CCGX_RAB_VALIDATE_FW 0x000B +#define CCGX_RAB_FLASH_ROW_RW 0x000C +#define FLASH_SIG 'F' +#define FLASH_RD_CMD 0x0 +#define FLASH_WR_CMD 0x1 +#define FLASH_FWCT1_WR_CMD 0x2 +#define FLASH_FWCT2_WR_CMD 0x3 +#define FLASH_FWCT_SIG_WR_CMD 0x4 +#define CCGX_RAB_READ_ALL_VER 0x0010 +#define CCGX_RAB_READ_FW2_VER 0x0020 +#define CCGX_RAB_UCSI_CONTROL 0x0039 +#define CCGX_RAB_UCSI_CONTROL_START BIT(0) +#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1) +#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff)) +#define REG_FLASH_RW_MEM 0x0200 +#define DEV_REG_IDX CCGX_RAB_DEVICE_MODE +#define CCGX_RAB_PDPORT_ENABLE 0x002C +#define PDPORT_1 BIT(0) +#define PDPORT_2 BIT(1) +#define CCGX_RAB_RESPONSE 0x007E +#define ASYNC_EVENT BIT(7) + +/* CCGx events & async msg codes */ +#define RESET_COMPLETE 0x80 +#define EVENT_INDEX RESET_COMPLETE +#define PORT_CONNECT_DET 0x84 +#define PORT_DISCONNECT_DET 0x85 +#define ROLE_SWAP_COMPELETE 0x87 + +/* ccg firmware */ +#define CYACD_LINE_SIZE 527 +#define CCG4_ROW_SIZE 256 +#define FW1_METADATA_ROW 0x1FF +#define FW2_METADATA_ROW 0x1FE +#define FW_CFG_TABLE_SIG_SIZE 256 + +static int secondary_fw_min_ver = 41; + +enum enum_flash_mode { + SECONDARY_BL, /* update secondary using bootloader */ + PRIMARY, /* update primary using secondary */ + SECONDARY, /* update secondary using primary */ + FLASH_NOT_NEEDED, /* update not required */ + FLASH_INVALID, +}; + +static const char * const ccg_fw_names[] = { + "ccg_boot.cyacd", + "ccg_primary.cyacd", + "ccg_secondary.cyacd" +}; + +struct ccg_dev_info { +#define CCG_DEVINFO_FWMODE_SHIFT (0) +#define CCG_DEVINFO_FWMODE_MASK (0x3 << CCG_DEVINFO_FWMODE_SHIFT) +#define CCG_DEVINFO_PDPORTS_SHIFT (2) +#define CCG_DEVINFO_PDPORTS_MASK (0x3 << CCG_DEVINFO_PDPORTS_SHIFT) + u8 mode; + u8 bl_mode; + __le16 silicon_id; + __le16 bl_last_row; +} __packed; + +struct version_format { + __le16 build; + u8 patch; + u8 ver; +#define CCG_VERSION_PATCH(x) ((x) << 16) +#define CCG_VERSION(x) ((x) << 24) +#define CCG_VERSION_MIN_SHIFT (0) +#define CCG_VERSION_MIN_MASK (0xf << CCG_VERSION_MIN_SHIFT) +#define CCG_VERSION_MAJ_SHIFT (4) +#define CCG_VERSION_MAJ_MASK (0xf << CCG_VERSION_MAJ_SHIFT) +} __packed; + +/* + * Firmware version 3.1.10 or earlier, built for NVIDIA has known issue + * of missing interrupt when a device is connected for runtime resume + */ +#define CCG_FW_BUILD_NVIDIA (('n' << 8) | 'v') +#define CCG_OLD_FW_VERSION (CCG_VERSION(0x31) | CCG_VERSION_PATCH(10)) + +/* Firmware for Tegra doesn't support UCSI ALT command, built + * for NVIDIA has known issue of reporting wrong capability info + */ +#define CCG_FW_BUILD_NVIDIA_TEGRA (('g' << 8) | 'n') + +/* Altmode offset for NVIDIA Function Test Board (FTB) */ +#define NVIDIA_FTB_DP_OFFSET (2) +#define NVIDIA_FTB_DBG_OFFSET (3) + +struct version_info { + struct version_format base; + struct version_format app; +}; + +struct fw_config_table { + u32 identity; + u16 table_size; + u8 fwct_version; + u8 is_key_change; + u8 guid[16]; + struct version_format base; + struct version_format app; + u8 primary_fw_digest[32]; + u32 key_exp_length; + u8 key_modulus[256]; + u8 key_exp[4]; +}; + +/* CCGx response codes */ +enum ccg_resp_code { + CMD_NO_RESP = 0x00, + CMD_SUCCESS = 0x02, + FLASH_DATA_AVAILABLE = 0x03, + CMD_INVALID = 0x05, + FLASH_UPDATE_FAIL = 0x07, + INVALID_FW = 0x08, + INVALID_ARG = 0x09, + CMD_NOT_SUPPORT = 0x0A, + TRANSACTION_FAIL = 0x0C, + PD_CMD_FAIL = 0x0D, + UNDEF_ERROR = 0x0F, + INVALID_RESP = 0x10, +}; + +#define CCG_EVENT_MAX (EVENT_INDEX + 43) + +struct ccg_cmd { + u16 reg; + u32 data; + int len; + u32 delay; /* ms delay for cmd timeout */ +}; + +struct ccg_resp { + u8 code; + u8 length; +}; + +struct ucsi_ccg_altmode { + u16 svid; + u32 mid; + u8 linked_idx; + u8 active_idx; +#define UCSI_MULTI_DP_INDEX (0xff) + bool checked; +} __packed; + +struct ucsi_ccg { + struct device *dev; + struct ucsi *ucsi; + struct i2c_client *client; + + struct ccg_dev_info info; + /* version info for boot, primary and secondary */ + struct version_info version[FW2 + 1]; + u32 fw_version; + /* CCG HPI communication flags */ + unsigned long flags; +#define RESET_PENDING 0 +#define DEV_CMD_PENDING 1 + struct ccg_resp dev_resp; + u8 cmd_resp; + int port_num; + int irq; + struct work_struct work; + struct mutex lock; /* to sync between user and driver thread */ + + /* fw build with vendor information */ + u16 fw_build; + struct work_struct pm_work; + + struct completion complete; + + u64 last_cmd_sent; + bool has_multiple_dp; + struct ucsi_ccg_altmode orig[UCSI_MAX_ALTMODES]; + struct ucsi_ccg_altmode updated[UCSI_MAX_ALTMODES]; +}; + +static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) +{ + struct i2c_client *client = uc->client; + const struct i2c_adapter_quirks *quirks = client->adapter->quirks; + unsigned char buf[2]; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0x0, + .len = sizeof(buf), + .buf = buf, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = data, + }, + }; + u32 rlen, rem_len = len, max_read_len = len; + int status; + + /* check any max_read_len limitation on i2c adapter */ + if (quirks && quirks->max_read_len) + max_read_len = quirks->max_read_len; + + pm_runtime_get_sync(uc->dev); + while (rem_len > 0) { + msgs[1].buf = &data[len - rem_len]; + rlen = min_t(u16, rem_len, max_read_len); + msgs[1].len = rlen; + put_unaligned_le16(rab, buf); + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (status < 0) { + dev_err(uc->dev, "i2c_transfer failed %d\n", status); + pm_runtime_put_sync(uc->dev); + return status; + } + rab += rlen; + rem_len -= rlen; + } + + pm_runtime_put_sync(uc->dev); + return 0; +} + +static int ccg_write(struct ucsi_ccg *uc, u16 rab, const u8 *data, u32 len) +{ + struct i2c_client *client = uc->client; + unsigned char *buf; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0x0, + } + }; + int status; + + buf = kzalloc(len + sizeof(rab), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + put_unaligned_le16(rab, buf); + memcpy(buf + sizeof(rab), data, len); + + msgs[0].len = len + sizeof(rab); + msgs[0].buf = buf; + + pm_runtime_get_sync(uc->dev); + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (status < 0) { + dev_err(uc->dev, "i2c_transfer failed %d\n", status); + pm_runtime_put_sync(uc->dev); + kfree(buf); + return status; + } + + pm_runtime_put_sync(uc->dev); + kfree(buf); + return 0; +} + +static int ucsi_ccg_init(struct ucsi_ccg *uc) +{ + unsigned int count = 10; + u8 data; + int status; + + data = CCGX_RAB_UCSI_CONTROL_STOP; + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); + if (status < 0) + return status; + + data = CCGX_RAB_UCSI_CONTROL_START; + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); + if (status < 0) + return status; + + /* + * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi control + * register write will push response which must be cleared. + */ + do { + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + if (!(data & DEV_INT)) + return 0; + + status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + usleep_range(10000, 11000); + } while (--count); + + return -ETIMEDOUT; +} + +static void ucsi_ccg_update_get_current_cam_cmd(struct ucsi_ccg *uc, u8 *data) +{ + u8 cam, new_cam; + + cam = data[0]; + new_cam = uc->orig[cam].linked_idx; + uc->updated[new_cam].active_idx = cam; + data[0] = new_cam; +} + +static bool ucsi_ccg_update_altmodes(struct ucsi *ucsi, + struct ucsi_altmode *orig, + struct ucsi_altmode *updated) +{ + struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); + struct ucsi_ccg_altmode *alt, *new_alt; + int i, j, k = 0; + bool found = false; + + alt = uc->orig; + new_alt = uc->updated; + memset(uc->updated, 0, sizeof(uc->updated)); + + /* + * Copy original connector altmodes to new structure. + * We need this before second loop since second loop + * checks for duplicate altmodes. + */ + for (i = 0; i < UCSI_MAX_ALTMODES; i++) { + alt[i].svid = orig[i].svid; + alt[i].mid = orig[i].mid; + if (!alt[i].svid) + break; + } + + for (i = 0; i < UCSI_MAX_ALTMODES; i++) { + if (!alt[i].svid) + break; + + /* already checked and considered */ + if (alt[i].checked) + continue; + + if (!DP_CONF_GET_PIN_ASSIGN(alt[i].mid)) { + /* Found Non DP altmode */ + new_alt[k].svid = alt[i].svid; + new_alt[k].mid |= alt[i].mid; + new_alt[k].linked_idx = i; + alt[i].linked_idx = k; + updated[k].svid = new_alt[k].svid; + updated[k].mid = new_alt[k].mid; + k++; + continue; + } + + for (j = i + 1; j < UCSI_MAX_ALTMODES; j++) { + if (alt[i].svid != alt[j].svid || + !DP_CONF_GET_PIN_ASSIGN(alt[j].mid)) { + continue; + } else { + /* Found duplicate DP mode */ + new_alt[k].svid = alt[i].svid; + new_alt[k].mid |= alt[i].mid | alt[j].mid; + new_alt[k].linked_idx = UCSI_MULTI_DP_INDEX; + alt[i].linked_idx = k; + alt[j].linked_idx = k; + alt[j].checked = true; + found = true; + } + } + if (found) { + uc->has_multiple_dp = true; + } else { + /* Didn't find any duplicate DP altmode */ + new_alt[k].svid = alt[i].svid; + new_alt[k].mid |= alt[i].mid; + new_alt[k].linked_idx = i; + alt[i].linked_idx = k; + } + updated[k].svid = new_alt[k].svid; + updated[k].mid = new_alt[k].mid; + k++; + } + return found; +} + +static void ucsi_ccg_update_set_new_cam_cmd(struct ucsi_ccg *uc, + struct ucsi_connector *con, + u64 *cmd) +{ + struct ucsi_ccg_altmode *new_port, *port; + struct typec_altmode *alt = NULL; + u8 new_cam, cam, pin; + bool enter_new_mode; + int i, j, k = 0xff; + + port = uc->orig; + new_cam = UCSI_SET_NEW_CAM_GET_AM(*cmd); + new_port = &uc->updated[new_cam]; + cam = new_port->linked_idx; + enter_new_mode = UCSI_SET_NEW_CAM_ENTER(*cmd); + + /* + * If CAM is UCSI_MULTI_DP_INDEX then this is DP altmode + * with multiple DP mode. Find out CAM for best pin assignment + * among all DP mode. Priorite pin E->D->C after making sure + * the partner supports that pin. + */ + if (cam == UCSI_MULTI_DP_INDEX) { + if (enter_new_mode) { + for (i = 0; con->partner_altmode[i]; i++) { + alt = con->partner_altmode[i]; + if (alt->svid == new_port->svid) + break; + } + /* + * alt will always be non NULL since this is + * UCSI_SET_NEW_CAM command and so there will be + * at least one con->partner_altmode[i] with svid + * matching with new_port->svid. + */ + for (j = 0; port[j].svid; j++) { + pin = DP_CONF_GET_PIN_ASSIGN(port[j].mid); + if (alt && port[j].svid == alt->svid && + (pin & DP_CONF_GET_PIN_ASSIGN(alt->vdo))) { + /* prioritize pin E->D->C */ + if (k == 0xff || (k != 0xff && pin > + DP_CONF_GET_PIN_ASSIGN(port[k].mid)) + ) { + k = j; + } + } + } + cam = k; + new_port->active_idx = cam; + } else { + cam = new_port->active_idx; + } + } + *cmd &= ~UCSI_SET_NEW_CAM_AM_MASK; + *cmd |= UCSI_SET_NEW_CAM_SET_AM(cam); +} + +/* + * Change the order of vdo values of NVIDIA test device FTB + * (Function Test Board) which reports altmode list with vdo=0x3 + * first and then vdo=0x. Current logic to assign mode value is + * based on order in altmode list and it causes a mismatch of CON + * and SOP altmodes since NVIDIA GPU connector has order of vdo=0x1 + * first and then vdo=0x3 + */ +static void ucsi_ccg_nvidia_altmode(struct ucsi_ccg *uc, + struct ucsi_altmode *alt) +{ + switch (UCSI_ALTMODE_OFFSET(uc->last_cmd_sent)) { + case NVIDIA_FTB_DP_OFFSET: + if (alt[0].mid == USB_TYPEC_NVIDIA_VLINK_DBG_VDO) + alt[0].mid = USB_TYPEC_NVIDIA_VLINK_DP_VDO | + DP_CAP_DP_SIGNALING | DP_CAP_USB | + DP_CONF_SET_PIN_ASSIGN(BIT(DP_PIN_ASSIGN_E)); + break; + case NVIDIA_FTB_DBG_OFFSET: + if (alt[0].mid == USB_TYPEC_NVIDIA_VLINK_DP_VDO) + alt[0].mid = USB_TYPEC_NVIDIA_VLINK_DBG_VDO; + break; + default: + break; + } +} + +static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset, + void *val, size_t val_len) +{ + struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); + u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset); + struct ucsi_capability *cap; + struct ucsi_altmode *alt; + int ret; + + ret = ccg_read(uc, reg, val, val_len); + if (ret) + return ret; + + if (offset != UCSI_MESSAGE_IN) + return ret; + + switch (UCSI_COMMAND(uc->last_cmd_sent)) { + case UCSI_GET_CURRENT_CAM: + if (uc->has_multiple_dp) + ucsi_ccg_update_get_current_cam_cmd(uc, (u8 *)val); + break; + case UCSI_GET_ALTERNATE_MODES: + if (UCSI_ALTMODE_RECIPIENT(uc->last_cmd_sent) == + UCSI_RECIPIENT_SOP) { + alt = val; + if (alt[0].svid == USB_TYPEC_NVIDIA_VLINK_SID) + ucsi_ccg_nvidia_altmode(uc, alt); + } + break; + case UCSI_GET_CAPABILITY: + if (uc->fw_build == CCG_FW_BUILD_NVIDIA_TEGRA) { + cap = val; + cap->features &= ~UCSI_CAP_ALT_MODE_DETAILS; + } + break; + default: + break; + } + uc->last_cmd_sent = 0; + + return ret; +} + +static int ucsi_ccg_async_write(struct ucsi *ucsi, unsigned int offset, + const void *val, size_t val_len) +{ + u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset); + + return ccg_write(ucsi_get_drvdata(ucsi), reg, val, val_len); +} + +static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset, + const void *val, size_t val_len) +{ + struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); + struct ucsi_connector *con; + int con_index; + int ret; + + mutex_lock(&uc->lock); + pm_runtime_get_sync(uc->dev); + set_bit(DEV_CMD_PENDING, &uc->flags); + + if (offset == UCSI_CONTROL && val_len == sizeof(uc->last_cmd_sent)) { + uc->last_cmd_sent = *(u64 *)val; + + if (UCSI_COMMAND(uc->last_cmd_sent) == UCSI_SET_NEW_CAM && + uc->has_multiple_dp) { + con_index = (uc->last_cmd_sent >> 16) & + UCSI_CMD_CONNECTOR_MASK; + con = &uc->ucsi->connector[con_index - 1]; + ucsi_ccg_update_set_new_cam_cmd(uc, con, (u64 *)val); + } + } + + ret = ucsi_ccg_async_write(ucsi, offset, val, val_len); + if (ret) + goto err_clear_bit; + + if (!wait_for_completion_timeout(&uc->complete, msecs_to_jiffies(5000))) + ret = -ETIMEDOUT; + +err_clear_bit: + clear_bit(DEV_CMD_PENDING, &uc->flags); + pm_runtime_put_sync(uc->dev); + mutex_unlock(&uc->lock); + + return ret; +} + +static const struct ucsi_operations ucsi_ccg_ops = { + .read = ucsi_ccg_read, + .sync_write = ucsi_ccg_sync_write, + .async_write = ucsi_ccg_async_write, + .update_altmodes = ucsi_ccg_update_altmodes +}; + +static irqreturn_t ccg_irq_handler(int irq, void *data) +{ + u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(UCSI_CCI); + struct ucsi_ccg *uc = data; + u8 intr_reg; + u32 cci; + int ret; + + ret = ccg_read(uc, CCGX_RAB_INTR_REG, &intr_reg, sizeof(intr_reg)); + if (ret) + return ret; + + ret = ccg_read(uc, reg, (void *)&cci, sizeof(cci)); + if (ret) + goto err_clear_irq; + + if (UCSI_CCI_CONNECTOR(cci)) + ucsi_connector_change(uc->ucsi, UCSI_CCI_CONNECTOR(cci)); + + if (test_bit(DEV_CMD_PENDING, &uc->flags) && + cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE)) + complete(&uc->complete); + +err_clear_irq: + ccg_write(uc, CCGX_RAB_INTR_REG, &intr_reg, sizeof(intr_reg)); + + return IRQ_HANDLED; +} + +static int ccg_request_irq(struct ucsi_ccg *uc) +{ + unsigned long flags = IRQF_ONESHOT; + + if (!dev_fwnode(uc->dev)) + flags |= IRQF_TRIGGER_HIGH; + + return request_threaded_irq(uc->irq, NULL, ccg_irq_handler, flags, dev_name(uc->dev), uc); +} + +static void ccg_pm_workaround_work(struct work_struct *pm_work) +{ + ccg_irq_handler(0, container_of(pm_work, struct ucsi_ccg, pm_work)); +} + +static int get_fw_info(struct ucsi_ccg *uc) +{ + int err; + + err = ccg_read(uc, CCGX_RAB_READ_ALL_VER, (u8 *)(&uc->version), + sizeof(uc->version)); + if (err < 0) + return err; + + uc->fw_version = CCG_VERSION(uc->version[FW2].app.ver) | + CCG_VERSION_PATCH(uc->version[FW2].app.patch); + + err = ccg_read(uc, CCGX_RAB_DEVICE_MODE, (u8 *)(&uc->info), + sizeof(uc->info)); + if (err < 0) + return err; + + return 0; +} + +static inline bool invalid_async_evt(int code) +{ + return (code >= CCG_EVENT_MAX) || (code < EVENT_INDEX); +} + +static void ccg_process_response(struct ucsi_ccg *uc) +{ + struct device *dev = uc->dev; + + if (uc->dev_resp.code & ASYNC_EVENT) { + if (uc->dev_resp.code == RESET_COMPLETE) { + if (test_bit(RESET_PENDING, &uc->flags)) + uc->cmd_resp = uc->dev_resp.code; + get_fw_info(uc); + } + if (invalid_async_evt(uc->dev_resp.code)) + dev_err(dev, "invalid async evt %d\n", + uc->dev_resp.code); + } else { + if (test_bit(DEV_CMD_PENDING, &uc->flags)) { + uc->cmd_resp = uc->dev_resp.code; + clear_bit(DEV_CMD_PENDING, &uc->flags); + } else { + dev_err(dev, "dev resp 0x%04x but no cmd pending\n", + uc->dev_resp.code); + } + } +} + +static int ccg_read_response(struct ucsi_ccg *uc) +{ + unsigned long target = jiffies + msecs_to_jiffies(1000); + struct device *dev = uc->dev; + u8 intval; + int status; + + /* wait for interrupt status to get updated */ + do { + status = ccg_read(uc, CCGX_RAB_INTR_REG, &intval, + sizeof(intval)); + if (status < 0) + return status; + + if (intval & DEV_INT) + break; + usleep_range(500, 600); + } while (time_is_after_jiffies(target)); + + if (time_is_before_jiffies(target)) { + dev_err(dev, "response timeout error\n"); + return -ETIME; + } + + status = ccg_read(uc, CCGX_RAB_RESPONSE, (u8 *)&uc->dev_resp, + sizeof(uc->dev_resp)); + if (status < 0) + return status; + + status = ccg_write(uc, CCGX_RAB_INTR_REG, &intval, sizeof(intval)); + if (status < 0) + return status; + + return 0; +} + +/* Caller must hold uc->lock */ +static int ccg_send_command(struct ucsi_ccg *uc, struct ccg_cmd *cmd) +{ + struct device *dev = uc->dev; + int ret; + + switch (cmd->reg & 0xF000) { + case DEV_REG_IDX: + set_bit(DEV_CMD_PENDING, &uc->flags); + break; + default: + dev_err(dev, "invalid cmd register\n"); + break; + } + + ret = ccg_write(uc, cmd->reg, (u8 *)&cmd->data, cmd->len); + if (ret < 0) + return ret; + + msleep(cmd->delay); + + ret = ccg_read_response(uc); + if (ret < 0) { + dev_err(dev, "response read error\n"); + switch (cmd->reg & 0xF000) { + case DEV_REG_IDX: + clear_bit(DEV_CMD_PENDING, &uc->flags); + break; + default: + dev_err(dev, "invalid cmd register\n"); + break; + } + return -EIO; + } + ccg_process_response(uc); + + return uc->cmd_resp; +} + +static int ccg_cmd_enter_flashing(struct ucsi_ccg *uc) +{ + struct ccg_cmd cmd; + int ret; + + cmd.reg = CCGX_RAB_ENTER_FLASHING; + cmd.data = FLASH_ENTER_SIG; + cmd.len = 1; + cmd.delay = 50; + + mutex_lock(&uc->lock); + + ret = ccg_send_command(uc, &cmd); + + mutex_unlock(&uc->lock); + + if (ret != CMD_SUCCESS) { + dev_err(uc->dev, "enter flashing failed ret=%d\n", ret); + return ret; + } + + return 0; +} + +static int ccg_cmd_reset(struct ucsi_ccg *uc) +{ + struct ccg_cmd cmd; + u8 *p; + int ret; + + p = (u8 *)&cmd.data; + cmd.reg = CCGX_RAB_RESET_REQ; + p[0] = RESET_SIG; + p[1] = CMD_RESET_DEV; + cmd.len = 2; + cmd.delay = 5000; + + mutex_lock(&uc->lock); + + set_bit(RESET_PENDING, &uc->flags); + + ret = ccg_send_command(uc, &cmd); + if (ret != RESET_COMPLETE) + goto err_clear_flag; + + ret = 0; + +err_clear_flag: + clear_bit(RESET_PENDING, &uc->flags); + + mutex_unlock(&uc->lock); + + return ret; +} + +static int ccg_cmd_port_control(struct ucsi_ccg *uc, bool enable) +{ + struct ccg_cmd cmd; + int ret; + + cmd.reg = CCGX_RAB_PDPORT_ENABLE; + if (enable) + cmd.data = (uc->port_num == 1) ? + PDPORT_1 : (PDPORT_1 | PDPORT_2); + else + cmd.data = 0x0; + cmd.len = 1; + cmd.delay = 10; + + mutex_lock(&uc->lock); + + ret = ccg_send_command(uc, &cmd); + + mutex_unlock(&uc->lock); + + if (ret != CMD_SUCCESS) { + dev_err(uc->dev, "port control failed ret=%d\n", ret); + return ret; + } + return 0; +} + +static int ccg_cmd_jump_boot_mode(struct ucsi_ccg *uc, int bl_mode) +{ + struct ccg_cmd cmd; + int ret; + + cmd.reg = CCGX_RAB_JUMP_TO_BOOT; + + if (bl_mode) + cmd.data = TO_BOOT; + else + cmd.data = TO_ALT_FW; + + cmd.len = 1; + cmd.delay = 100; + + mutex_lock(&uc->lock); + + set_bit(RESET_PENDING, &uc->flags); + + ret = ccg_send_command(uc, &cmd); + if (ret != RESET_COMPLETE) + goto err_clear_flag; + + ret = 0; + +err_clear_flag: + clear_bit(RESET_PENDING, &uc->flags); + + mutex_unlock(&uc->lock); + + return ret; +} + +static int +ccg_cmd_write_flash_row(struct ucsi_ccg *uc, u16 row, + const void *data, u8 fcmd) +{ + struct i2c_client *client = uc->client; + struct ccg_cmd cmd; + u8 buf[CCG4_ROW_SIZE + 2]; + u8 *p; + int ret; + + /* Copy the data into the flash read/write memory. */ + put_unaligned_le16(REG_FLASH_RW_MEM, buf); + + memcpy(buf + 2, data, CCG4_ROW_SIZE); + + mutex_lock(&uc->lock); + + ret = i2c_master_send(client, buf, CCG4_ROW_SIZE + 2); + if (ret != CCG4_ROW_SIZE + 2) { + dev_err(uc->dev, "REG_FLASH_RW_MEM write fail %d\n", ret); + mutex_unlock(&uc->lock); + return ret < 0 ? ret : -EIO; + } + + /* Use the FLASH_ROW_READ_WRITE register to trigger */ + /* writing of data to the desired flash row */ + p = (u8 *)&cmd.data; + cmd.reg = CCGX_RAB_FLASH_ROW_RW; + p[0] = FLASH_SIG; + p[1] = fcmd; + put_unaligned_le16(row, &p[2]); + cmd.len = 4; + cmd.delay = 50; + if (fcmd == FLASH_FWCT_SIG_WR_CMD) + cmd.delay += 400; + if (row == 510) + cmd.delay += 220; + ret = ccg_send_command(uc, &cmd); + + mutex_unlock(&uc->lock); + + if (ret != CMD_SUCCESS) { + dev_err(uc->dev, "write flash row failed ret=%d\n", ret); + return ret; + } + + return 0; +} + +static int ccg_cmd_validate_fw(struct ucsi_ccg *uc, unsigned int fwid) +{ + struct ccg_cmd cmd; + int ret; + + cmd.reg = CCGX_RAB_VALIDATE_FW; + cmd.data = fwid; + cmd.len = 1; + cmd.delay = 500; + + mutex_lock(&uc->lock); + + ret = ccg_send_command(uc, &cmd); + + mutex_unlock(&uc->lock); + + if (ret != CMD_SUCCESS) + return ret; + + return 0; +} + +static bool ccg_check_vendor_version(struct ucsi_ccg *uc, + struct version_format *app, + struct fw_config_table *fw_cfg) +{ + struct device *dev = uc->dev; + + /* Check if the fw build is for supported vendors */ + if (le16_to_cpu(app->build) != uc->fw_build) { + dev_info(dev, "current fw is not from supported vendor\n"); + return false; + } + + /* Check if the new fw build is for supported vendors */ + if (le16_to_cpu(fw_cfg->app.build) != uc->fw_build) { + dev_info(dev, "new fw is not from supported vendor\n"); + return false; + } + return true; +} + +static bool ccg_check_fw_version(struct ucsi_ccg *uc, const char *fw_name, + struct version_format *app) +{ + const struct firmware *fw = NULL; + struct device *dev = uc->dev; + struct fw_config_table fw_cfg; + u32 cur_version, new_version; + bool is_later = false; + + if (request_firmware(&fw, fw_name, dev) != 0) { + dev_err(dev, "error: Failed to open cyacd file %s\n", fw_name); + return false; + } + + /* + * check if signed fw + * last part of fw image is fw cfg table and signature + */ + if (fw->size < sizeof(fw_cfg) + FW_CFG_TABLE_SIG_SIZE) + goto out_release_firmware; + + memcpy((uint8_t *)&fw_cfg, fw->data + fw->size - + sizeof(fw_cfg) - FW_CFG_TABLE_SIG_SIZE, sizeof(fw_cfg)); + + if (fw_cfg.identity != ('F' | 'W' << 8 | 'C' << 16 | 'T' << 24)) { + dev_info(dev, "not a signed image\n"); + goto out_release_firmware; + } + + /* compare input version with FWCT version */ + cur_version = le16_to_cpu(app->build) | CCG_VERSION_PATCH(app->patch) | + CCG_VERSION(app->ver); + + new_version = le16_to_cpu(fw_cfg.app.build) | + CCG_VERSION_PATCH(fw_cfg.app.patch) | + CCG_VERSION(fw_cfg.app.ver); + + if (!ccg_check_vendor_version(uc, app, &fw_cfg)) + goto out_release_firmware; + + if (new_version > cur_version) + is_later = true; + +out_release_firmware: + release_firmware(fw); + return is_later; +} + +static int ccg_fw_update_needed(struct ucsi_ccg *uc, + enum enum_flash_mode *mode) +{ + struct device *dev = uc->dev; + int err; + struct version_info version[3]; + + err = ccg_read(uc, CCGX_RAB_DEVICE_MODE, (u8 *)(&uc->info), + sizeof(uc->info)); + if (err) { + dev_err(dev, "read device mode failed\n"); + return err; + } + + err = ccg_read(uc, CCGX_RAB_READ_ALL_VER, (u8 *)version, + sizeof(version)); + if (err) { + dev_err(dev, "read device mode failed\n"); + return err; + } + + if (memcmp(&version[FW1], "\0\0\0\0\0\0\0\0", + sizeof(struct version_info)) == 0) { + dev_info(dev, "secondary fw is not flashed\n"); + *mode = SECONDARY_BL; + } else if (le16_to_cpu(version[FW1].base.build) < + secondary_fw_min_ver) { + dev_info(dev, "secondary fw version is too low (< %d)\n", + secondary_fw_min_ver); + *mode = SECONDARY; + } else if (memcmp(&version[FW2], "\0\0\0\0\0\0\0\0", + sizeof(struct version_info)) == 0) { + dev_info(dev, "primary fw is not flashed\n"); + *mode = PRIMARY; + } else if (ccg_check_fw_version(uc, ccg_fw_names[PRIMARY], + &version[FW2].app)) { + dev_info(dev, "found primary fw with later version\n"); + *mode = PRIMARY; + } else { + dev_info(dev, "secondary and primary fw are the latest\n"); + *mode = FLASH_NOT_NEEDED; + } + return 0; +} + +static int do_flash(struct ucsi_ccg *uc, enum enum_flash_mode mode) +{ + struct device *dev = uc->dev; + const struct firmware *fw = NULL; + const char *p, *s; + const char *eof; + int err, row, len, line_sz, line_cnt = 0; + unsigned long start_time = jiffies; + struct fw_config_table fw_cfg; + u8 fw_cfg_sig[FW_CFG_TABLE_SIG_SIZE]; + u8 *wr_buf; + + err = request_firmware(&fw, ccg_fw_names[mode], dev); + if (err) { + dev_err(dev, "request %s failed err=%d\n", + ccg_fw_names[mode], err); + return err; + } + + if (((uc->info.mode & CCG_DEVINFO_FWMODE_MASK) >> + CCG_DEVINFO_FWMODE_SHIFT) == FW2) { + err = ccg_cmd_port_control(uc, false); + if (err < 0) + goto release_fw; + err = ccg_cmd_jump_boot_mode(uc, 0); + if (err < 0) + goto release_fw; + } + + eof = fw->data + fw->size; + + /* + * check if signed fw + * last part of fw image is fw cfg table and signature + */ + if (fw->size < sizeof(fw_cfg) + sizeof(fw_cfg_sig)) + goto not_signed_fw; + + memcpy((uint8_t *)&fw_cfg, fw->data + fw->size - + sizeof(fw_cfg) - sizeof(fw_cfg_sig), sizeof(fw_cfg)); + + if (fw_cfg.identity != ('F' | ('W' << 8) | ('C' << 16) | ('T' << 24))) { + dev_info(dev, "not a signed image\n"); + goto not_signed_fw; + } + eof = fw->data + fw->size - sizeof(fw_cfg) - sizeof(fw_cfg_sig); + + memcpy((uint8_t *)&fw_cfg_sig, + fw->data + fw->size - sizeof(fw_cfg_sig), sizeof(fw_cfg_sig)); + + /* flash fw config table and signature first */ + err = ccg_cmd_write_flash_row(uc, 0, (u8 *)&fw_cfg, + FLASH_FWCT1_WR_CMD); + if (err) + goto release_fw; + + err = ccg_cmd_write_flash_row(uc, 0, (u8 *)&fw_cfg + CCG4_ROW_SIZE, + FLASH_FWCT2_WR_CMD); + if (err) + goto release_fw; + + err = ccg_cmd_write_flash_row(uc, 0, &fw_cfg_sig, + FLASH_FWCT_SIG_WR_CMD); + if (err) + goto release_fw; + +not_signed_fw: + wr_buf = kzalloc(CCG4_ROW_SIZE + 4, GFP_KERNEL); + if (!wr_buf) { + err = -ENOMEM; + goto release_fw; + } + + err = ccg_cmd_enter_flashing(uc); + if (err) + goto release_mem; + + /***************************************************************** + * CCG firmware image (.cyacd) file line format + * + * :00rrrrllll[dd....]cc/r/n + * + * :00 header + * rrrr is row number to flash (4 char) + * llll is data len to flash (4 char) + * dd is a data field represents one byte of data (512 char) + * cc is checksum (2 char) + * \r\n newline + * + * Total length: 3 + 4 + 4 + 512 + 2 + 2 = 527 + * + *****************************************************************/ + + p = strnchr(fw->data, fw->size, ':'); + while (p < eof) { + s = strnchr(p + 1, eof - p - 1, ':'); + + if (!s) + s = eof; + + line_sz = s - p; + + if (line_sz != CYACD_LINE_SIZE) { + dev_err(dev, "Bad FW format line_sz=%d\n", line_sz); + err = -EINVAL; + goto release_mem; + } + + if (hex2bin(wr_buf, p + 3, CCG4_ROW_SIZE + 4)) { + err = -EINVAL; + goto release_mem; + } + + row = get_unaligned_be16(wr_buf); + len = get_unaligned_be16(&wr_buf[2]); + + if (len != CCG4_ROW_SIZE) { + err = -EINVAL; + goto release_mem; + } + + err = ccg_cmd_write_flash_row(uc, row, wr_buf + 4, + FLASH_WR_CMD); + if (err) + goto release_mem; + + line_cnt++; + p = s; + } + + dev_info(dev, "total %d row flashed. time: %dms\n", + line_cnt, jiffies_to_msecs(jiffies - start_time)); + + err = ccg_cmd_validate_fw(uc, (mode == PRIMARY) ? FW2 : FW1); + if (err) + dev_err(dev, "%s validation failed err=%d\n", + (mode == PRIMARY) ? "FW2" : "FW1", err); + else + dev_info(dev, "%s validated\n", + (mode == PRIMARY) ? "FW2" : "FW1"); + + err = ccg_cmd_port_control(uc, false); + if (err < 0) + goto release_mem; + + err = ccg_cmd_reset(uc); + if (err < 0) + goto release_mem; + + err = ccg_cmd_port_control(uc, true); + if (err < 0) + goto release_mem; + +release_mem: + kfree(wr_buf); + +release_fw: + release_firmware(fw); + return err; +} + +/******************************************************************************* + * CCG4 has two copies of the firmware in addition to the bootloader. + * If the device is running FW1, FW2 can be updated with the new version. + * Dual firmware mode allows the CCG device to stay in a PD contract and support + * USB PD and Type-C functionality while a firmware update is in progress. + ******************************************************************************/ +static int ccg_fw_update(struct ucsi_ccg *uc, enum enum_flash_mode flash_mode) +{ + int err = 0; + + while (flash_mode != FLASH_NOT_NEEDED) { + err = do_flash(uc, flash_mode); + if (err < 0) + return err; + err = ccg_fw_update_needed(uc, &flash_mode); + if (err < 0) + return err; + } + dev_info(uc->dev, "CCG FW update successful\n"); + + return err; +} + +static int ccg_restart(struct ucsi_ccg *uc) +{ + struct device *dev = uc->dev; + int status; + + status = ucsi_ccg_init(uc); + if (status < 0) { + dev_err(dev, "ucsi_ccg_start fail, err=%d\n", status); + return status; + } + + status = ccg_request_irq(uc); + if (status < 0) { + dev_err(dev, "request_threaded_irq failed - %d\n", status); + return status; + } + + status = ucsi_register(uc->ucsi); + if (status) { + dev_err(uc->dev, "failed to register the interface\n"); + return status; + } + + pm_runtime_enable(uc->dev); + return 0; +} + +static void ccg_update_firmware(struct work_struct *work) +{ + struct ucsi_ccg *uc = container_of(work, struct ucsi_ccg, work); + enum enum_flash_mode flash_mode; + int status; + + status = ccg_fw_update_needed(uc, &flash_mode); + if (status < 0) + return; + + if (flash_mode != FLASH_NOT_NEEDED) { + ucsi_unregister(uc->ucsi); + pm_runtime_disable(uc->dev); + free_irq(uc->irq, uc); + + ccg_fw_update(uc, flash_mode); + ccg_restart(uc); + } +} + +static ssize_t do_flash_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t n) +{ + struct ucsi_ccg *uc = i2c_get_clientdata(to_i2c_client(dev)); + bool flash; + + if (kstrtobool(buf, &flash)) + return -EINVAL; + + if (!flash) + return n; + + if (uc->fw_build == 0x0) { + dev_err(dev, "fail to flash FW due to missing FW build info\n"); + return -EINVAL; + } + + schedule_work(&uc->work); + return n; +} + +static DEVICE_ATTR_WO(do_flash); + +static struct attribute *ucsi_ccg_attrs[] = { + &dev_attr_do_flash.attr, + NULL, +}; +ATTRIBUTE_GROUPS(ucsi_ccg); + +static int ucsi_ccg_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ucsi_ccg *uc; + const char *fw_name; + int status; + + uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL); + if (!uc) + return -ENOMEM; + + uc->dev = dev; + uc->client = client; + uc->irq = client->irq; + mutex_init(&uc->lock); + init_completion(&uc->complete); + INIT_WORK(&uc->work, ccg_update_firmware); + INIT_WORK(&uc->pm_work, ccg_pm_workaround_work); + + /* Only fail FW flashing when FW build information is not provided */ + status = device_property_read_string(dev, "firmware-name", &fw_name); + if (!status) { + if (!strcmp(fw_name, "nvidia,jetson-agx-xavier")) + uc->fw_build = CCG_FW_BUILD_NVIDIA_TEGRA; + else if (!strcmp(fw_name, "nvidia,gpu")) + uc->fw_build = CCG_FW_BUILD_NVIDIA; + } + + if (!uc->fw_build) + dev_err(uc->dev, "failed to get FW build information\n"); + + /* reset ccg device and initialize ucsi */ + status = ucsi_ccg_init(uc); + if (status < 0) { + dev_err(uc->dev, "ucsi_ccg_init failed - %d\n", status); + return status; + } + + status = get_fw_info(uc); + if (status < 0) { + dev_err(uc->dev, "get_fw_info failed - %d\n", status); + return status; + } + + uc->port_num = 1; + + if (uc->info.mode & CCG_DEVINFO_PDPORTS_MASK) + uc->port_num++; + + uc->ucsi = ucsi_create(dev, &ucsi_ccg_ops); + if (IS_ERR(uc->ucsi)) + return PTR_ERR(uc->ucsi); + + ucsi_set_drvdata(uc->ucsi, uc); + + status = ccg_request_irq(uc); + if (status < 0) { + dev_err(uc->dev, "request_threaded_irq failed - %d\n", status); + goto out_ucsi_destroy; + } + + status = ucsi_register(uc->ucsi); + if (status) + goto out_free_irq; + + i2c_set_clientdata(client, uc); + + pm_runtime_set_active(uc->dev); + pm_runtime_enable(uc->dev); + pm_runtime_use_autosuspend(uc->dev); + pm_runtime_set_autosuspend_delay(uc->dev, 5000); + pm_runtime_idle(uc->dev); + + return 0; + +out_free_irq: + free_irq(uc->irq, uc); +out_ucsi_destroy: + ucsi_destroy(uc->ucsi); + + return status; +} + +static void ucsi_ccg_remove(struct i2c_client *client) +{ + struct ucsi_ccg *uc = i2c_get_clientdata(client); + + cancel_work_sync(&uc->pm_work); + cancel_work_sync(&uc->work); + pm_runtime_disable(uc->dev); + ucsi_unregister(uc->ucsi); + ucsi_destroy(uc->ucsi); + free_irq(uc->irq, uc); +} + +static const struct of_device_id ucsi_ccg_of_match_table[] = { + { .compatible = "cypress,cypd4226", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ucsi_ccg_of_match_table); + +static const struct i2c_device_id ucsi_ccg_device_id[] = { + {"ccgx-ucsi", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id); + +static const struct acpi_device_id amd_i2c_ucsi_match[] = { + {"AMDI0042"}, + {} +}; +MODULE_DEVICE_TABLE(acpi, amd_i2c_ucsi_match); + +static int ucsi_ccg_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ucsi_ccg *uc = i2c_get_clientdata(client); + + return ucsi_resume(uc->ucsi); +} + +static int ucsi_ccg_runtime_suspend(struct device *dev) +{ + return 0; +} + +static int ucsi_ccg_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ucsi_ccg *uc = i2c_get_clientdata(client); + + /* + * Firmware version 3.1.10 or earlier, built for NVIDIA has known issue + * of missing interrupt when a device is connected for runtime resume. + * Schedule a work to call ISR as a workaround. + */ + if (uc->fw_build == CCG_FW_BUILD_NVIDIA && + uc->fw_version <= CCG_OLD_FW_VERSION) + schedule_work(&uc->pm_work); + + return 0; +} + +static const struct dev_pm_ops ucsi_ccg_pm = { + .resume = ucsi_ccg_resume, + .runtime_suspend = ucsi_ccg_runtime_suspend, + .runtime_resume = ucsi_ccg_runtime_resume, +}; + +static struct i2c_driver ucsi_ccg_driver = { + .driver = { + .name = "ucsi_ccg", + .pm = &ucsi_ccg_pm, + .dev_groups = ucsi_ccg_groups, + .acpi_match_table = amd_i2c_ucsi_match, + .of_match_table = ucsi_ccg_of_match_table, + }, + .probe = ucsi_ccg_probe, + .remove = ucsi_ccg_remove, + .id_table = ucsi_ccg_device_id, +}; + +module_i2c_driver(ucsi_ccg_driver); + +MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>"); +MODULE_DESCRIPTION("UCSI driver for Cypress CCGx Type-C controller"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c new file mode 100644 index 0000000000..4853141cd1 --- /dev/null +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -0,0 +1,396 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Linaro Ltd + */ +#include <linux/auxiliary_bus.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/property.h> +#include <linux/soc/qcom/pdr.h> +#include <linux/usb/typec_mux.h> +#include <linux/gpio/consumer.h> +#include <linux/soc/qcom/pmic_glink.h> +#include "ucsi.h" + +#define PMIC_GLINK_MAX_PORTS 2 + +#define UCSI_BUF_SIZE 48 + +#define MSG_TYPE_REQ_RESP 1 +#define UCSI_BUF_SIZE 48 + +#define UC_NOTIFY_RECEIVER_UCSI 0x0 +#define UC_UCSI_READ_BUF_REQ 0x11 +#define UC_UCSI_WRITE_BUF_REQ 0x12 +#define UC_UCSI_USBC_NOTIFY_IND 0x13 + +struct ucsi_read_buf_req_msg { + struct pmic_glink_hdr hdr; +}; + +struct ucsi_read_buf_resp_msg { + struct pmic_glink_hdr hdr; + u8 buf[UCSI_BUF_SIZE]; + u32 ret_code; +}; + +struct ucsi_write_buf_req_msg { + struct pmic_glink_hdr hdr; + u8 buf[UCSI_BUF_SIZE]; + u32 reserved; +}; + +struct ucsi_write_buf_resp_msg { + struct pmic_glink_hdr hdr; + u32 ret_code; +}; + +struct ucsi_notify_ind_msg { + struct pmic_glink_hdr hdr; + u32 notification; + u32 receiver; + u32 reserved; +}; + +struct pmic_glink_ucsi { + struct device *dev; + + struct gpio_desc *port_orientation[PMIC_GLINK_MAX_PORTS]; + struct typec_switch *port_switch[PMIC_GLINK_MAX_PORTS]; + + struct pmic_glink_client *client; + + struct ucsi *ucsi; + struct completion read_ack; + struct completion write_ack; + struct completion sync_ack; + bool sync_pending; + struct mutex lock; /* protects concurrent access to PMIC Glink interface */ + + int sync_val; + + struct work_struct notify_work; + struct work_struct register_work; + + u8 read_buf[UCSI_BUF_SIZE]; +}; + +static int pmic_glink_ucsi_read(struct ucsi *__ucsi, unsigned int offset, + void *val, size_t val_len) +{ + struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(__ucsi); + struct ucsi_read_buf_req_msg req = {}; + unsigned long left; + int ret; + + req.hdr.owner = PMIC_GLINK_OWNER_USBC; + req.hdr.type = MSG_TYPE_REQ_RESP; + req.hdr.opcode = UC_UCSI_READ_BUF_REQ; + + mutex_lock(&ucsi->lock); + memset(ucsi->read_buf, 0, sizeof(ucsi->read_buf)); + reinit_completion(&ucsi->read_ack); + + ret = pmic_glink_send(ucsi->client, &req, sizeof(req)); + if (ret < 0) { + dev_err(ucsi->dev, "failed to send UCSI read request: %d\n", ret); + goto out_unlock; + } + + left = wait_for_completion_timeout(&ucsi->read_ack, 5 * HZ); + if (!left) { + dev_err(ucsi->dev, "timeout waiting for UCSI read response\n"); + ret = -ETIMEDOUT; + goto out_unlock; + } + + memcpy(val, &ucsi->read_buf[offset], val_len); + ret = 0; + +out_unlock: + mutex_unlock(&ucsi->lock); + + return ret; +} + +static int pmic_glink_ucsi_locked_write(struct pmic_glink_ucsi *ucsi, unsigned int offset, + const void *val, size_t val_len) +{ + struct ucsi_write_buf_req_msg req = {}; + unsigned long left; + int ret; + + req.hdr.owner = PMIC_GLINK_OWNER_USBC; + req.hdr.type = MSG_TYPE_REQ_RESP; + req.hdr.opcode = UC_UCSI_WRITE_BUF_REQ; + memcpy(&req.buf[offset], val, val_len); + + reinit_completion(&ucsi->write_ack); + + ret = pmic_glink_send(ucsi->client, &req, sizeof(req)); + if (ret < 0) { + dev_err(ucsi->dev, "failed to send UCSI write request: %d\n", ret); + return ret; + } + + left = wait_for_completion_timeout(&ucsi->write_ack, 5 * HZ); + if (!left) { + dev_err(ucsi->dev, "timeout waiting for UCSI write response\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int pmic_glink_ucsi_async_write(struct ucsi *__ucsi, unsigned int offset, + const void *val, size_t val_len) +{ + struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(__ucsi); + int ret; + + mutex_lock(&ucsi->lock); + ret = pmic_glink_ucsi_locked_write(ucsi, offset, val, val_len); + mutex_unlock(&ucsi->lock); + + return ret; +} + +static int pmic_glink_ucsi_sync_write(struct ucsi *__ucsi, unsigned int offset, + const void *val, size_t val_len) +{ + struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(__ucsi); + unsigned long left; + int ret; + + /* TOFIX: Downstream forces recipient to CON when UCSI_GET_ALTERNATE_MODES command */ + + mutex_lock(&ucsi->lock); + ucsi->sync_val = 0; + reinit_completion(&ucsi->sync_ack); + ucsi->sync_pending = true; + ret = pmic_glink_ucsi_locked_write(ucsi, offset, val, val_len); + mutex_unlock(&ucsi->lock); + + left = wait_for_completion_timeout(&ucsi->sync_ack, 5 * HZ); + if (!left) { + dev_err(ucsi->dev, "timeout waiting for UCSI sync write response\n"); + ret = -ETIMEDOUT; + } else if (ucsi->sync_val) { + dev_err(ucsi->dev, "sync write returned: %d\n", ucsi->sync_val); + } + + ucsi->sync_pending = false; + + return ret; +} + +static const struct ucsi_operations pmic_glink_ucsi_ops = { + .read = pmic_glink_ucsi_read, + .sync_write = pmic_glink_ucsi_sync_write, + .async_write = pmic_glink_ucsi_async_write +}; + +static void pmic_glink_ucsi_read_ack(struct pmic_glink_ucsi *ucsi, const void *data, int len) +{ + const struct ucsi_read_buf_resp_msg *resp = data; + + if (resp->ret_code) + return; + + memcpy(ucsi->read_buf, resp->buf, UCSI_BUF_SIZE); + complete(&ucsi->read_ack); +} + +static void pmic_glink_ucsi_write_ack(struct pmic_glink_ucsi *ucsi, const void *data, int len) +{ + const struct ucsi_write_buf_resp_msg *resp = data; + + if (resp->ret_code) + return; + + ucsi->sync_val = resp->ret_code; + complete(&ucsi->write_ack); +} + +static void pmic_glink_ucsi_notify(struct work_struct *work) +{ + struct pmic_glink_ucsi *ucsi = container_of(work, struct pmic_glink_ucsi, notify_work); + unsigned int con_num; + u32 cci; + int ret; + + ret = pmic_glink_ucsi_read(ucsi->ucsi, UCSI_CCI, &cci, sizeof(cci)); + if (ret) { + dev_err(ucsi->dev, "failed to read CCI on notification\n"); + return; + } + + con_num = UCSI_CCI_CONNECTOR(cci); + if (con_num) { + if (con_num <= PMIC_GLINK_MAX_PORTS && + ucsi->port_orientation[con_num - 1]) { + int orientation = gpiod_get_value(ucsi->port_orientation[con_num - 1]); + + if (orientation >= 0) { + typec_switch_set(ucsi->port_switch[con_num - 1], + orientation ? TYPEC_ORIENTATION_REVERSE + : TYPEC_ORIENTATION_NORMAL); + } + } + + ucsi_connector_change(ucsi->ucsi, con_num); + } + + if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) { + ucsi->sync_val = -EBUSY; + complete(&ucsi->sync_ack); + } else if (ucsi->sync_pending && + (cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))) { + complete(&ucsi->sync_ack); + } +} + +static void pmic_glink_ucsi_register(struct work_struct *work) +{ + struct pmic_glink_ucsi *ucsi = container_of(work, struct pmic_glink_ucsi, register_work); + + ucsi_register(ucsi->ucsi); +} + +static void pmic_glink_ucsi_callback(const void *data, size_t len, void *priv) +{ + struct pmic_glink_ucsi *ucsi = priv; + const struct pmic_glink_hdr *hdr = data; + + switch (le32_to_cpu(hdr->opcode)) { + case UC_UCSI_READ_BUF_REQ: + pmic_glink_ucsi_read_ack(ucsi, data, len); + break; + case UC_UCSI_WRITE_BUF_REQ: + pmic_glink_ucsi_write_ack(ucsi, data, len); + break; + case UC_UCSI_USBC_NOTIFY_IND: + schedule_work(&ucsi->notify_work); + break; + }; +} + +static void pmic_glink_ucsi_pdr_notify(void *priv, int state) +{ + struct pmic_glink_ucsi *ucsi = priv; + + if (state == SERVREG_SERVICE_STATE_UP) + schedule_work(&ucsi->register_work); + else if (state == SERVREG_SERVICE_STATE_DOWN) + ucsi_unregister(ucsi->ucsi); +} + +static void pmic_glink_ucsi_destroy(void *data) +{ + struct pmic_glink_ucsi *ucsi = data; + + /* Protect to make sure we're not in a middle of a transaction from a glink callback */ + mutex_lock(&ucsi->lock); + ucsi_destroy(ucsi->ucsi); + mutex_unlock(&ucsi->lock); +} + +static int pmic_glink_ucsi_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct pmic_glink_ucsi *ucsi; + struct device *dev = &adev->dev; + struct fwnode_handle *fwnode; + int ret; + + ucsi = devm_kzalloc(dev, sizeof(*ucsi), GFP_KERNEL); + if (!ucsi) + return -ENOMEM; + + ucsi->dev = dev; + dev_set_drvdata(dev, ucsi); + + INIT_WORK(&ucsi->notify_work, pmic_glink_ucsi_notify); + INIT_WORK(&ucsi->register_work, pmic_glink_ucsi_register); + init_completion(&ucsi->read_ack); + init_completion(&ucsi->write_ack); + init_completion(&ucsi->sync_ack); + mutex_init(&ucsi->lock); + + ucsi->ucsi = ucsi_create(dev, &pmic_glink_ucsi_ops); + if (IS_ERR(ucsi->ucsi)) + return PTR_ERR(ucsi->ucsi); + + /* Make sure we destroy *after* pmic_glink unregister */ + ret = devm_add_action_or_reset(dev, pmic_glink_ucsi_destroy, ucsi); + if (ret) + return ret; + + ucsi_set_drvdata(ucsi->ucsi, ucsi); + + device_for_each_child_node(dev, fwnode) { + struct gpio_desc *desc; + u32 port; + + ret = fwnode_property_read_u32(fwnode, "reg", &port); + if (ret < 0) { + dev_err(dev, "missing reg property of %pOFn\n", fwnode); + return ret; + } + + if (port >= PMIC_GLINK_MAX_PORTS) { + dev_warn(dev, "invalid connector number, ignoring\n"); + continue; + } + + desc = devm_gpiod_get_index_optional(&adev->dev, "orientation", port, GPIOD_IN); + + /* If GPIO isn't found, continue */ + if (!desc) + continue; + + if (IS_ERR(desc)) + return dev_err_probe(dev, PTR_ERR(desc), + "unable to acquire orientation gpio\n"); + ucsi->port_orientation[port] = desc; + + ucsi->port_switch[port] = fwnode_typec_switch_get(fwnode); + if (IS_ERR(ucsi->port_switch[port])) + return dev_err_probe(dev, PTR_ERR(ucsi->port_switch[port]), + "failed to acquire orientation-switch\n"); + } + + ucsi->client = devm_pmic_glink_register_client(dev, + PMIC_GLINK_OWNER_USBC, + pmic_glink_ucsi_callback, + pmic_glink_ucsi_pdr_notify, + ucsi); + return PTR_ERR_OR_ZERO(ucsi->client); +} + +static void pmic_glink_ucsi_remove(struct auxiliary_device *adev) +{ + struct pmic_glink_ucsi *ucsi = dev_get_drvdata(&adev->dev); + + /* Unregister first to stop having read & writes */ + ucsi_unregister(ucsi->ucsi); +} + +static const struct auxiliary_device_id pmic_glink_ucsi_id_table[] = { + { .name = "pmic_glink.ucsi", }, + {}, +}; +MODULE_DEVICE_TABLE(auxiliary, pmic_glink_ucsi_id_table); + +static struct auxiliary_driver pmic_glink_ucsi_driver = { + .name = "pmic_glink_ucsi", + .probe = pmic_glink_ucsi_probe, + .remove = pmic_glink_ucsi_remove, + .id_table = pmic_glink_ucsi_id_table, +}; + +module_auxiliary_driver(pmic_glink_ucsi_driver); + +MODULE_DESCRIPTION("Qualcomm PMIC GLINK UCSI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c new file mode 100644 index 0000000000..93d7806681 --- /dev/null +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c @@ -0,0 +1,775 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +/* + * UCSI driver for STMicroelectronics STM32G0 Type-C PD controller + * + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved + * Author: Fabrice Gasnier <fabrice.gasnier@foss.st.com>. + */ + +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <asm/unaligned.h> + +#include "ucsi.h" + +/* STM32G0 I2C bootloader addr: 0b1010001x (See AN2606) */ +#define STM32G0_I2C_BL_ADDR (0xa2 >> 1) + +/* STM32G0 I2C bootloader max data size */ +#define STM32G0_I2C_BL_SZ 256 + +/* STM32 I2C bootloader commands (See AN4221) */ +#define STM32_CMD_GVR 0x01 /* Gets the bootloader version */ +#define STM32_CMD_GVR_LEN 1 +#define STM32_CMD_RM 0x11 /* Reag memory */ +#define STM32_CMD_WM 0x31 /* Write memory */ +#define STM32_CMD_ADDR_LEN 5 /* Address len for go, mem write... */ +#define STM32_CMD_ERASE 0x44 /* Erase page, bank or all */ +#define STM32_CMD_ERASE_SPECIAL_LEN 3 +#define STM32_CMD_GLOBAL_MASS_ERASE 0xffff /* All-bank erase */ + +/* STM32 I2C bootloader answer status */ +#define STM32G0_I2C_BL_ACK 0x79 +#define STM32G0_I2C_BL_NACK 0x1f +#define STM32G0_I2C_BL_BUSY 0x76 + +/* STM32G0 flash definitions */ +#define STM32G0_USER_OPTION_BYTES 0x1fff7800 +#define STM32G0_USER_OB_NBOOT0 BIT(26) +#define STM32G0_USER_OB_NBOOT_SEL BIT(24) +#define STM32G0_USER_OB_BOOT_MAIN (STM32G0_USER_OB_NBOOT0 | STM32G0_USER_OB_NBOOT_SEL) +#define STM32G0_MAIN_MEM_ADDR 0x08000000 + +/* STM32 Firmware definitions: additional commands */ +#define STM32G0_FW_GETVER 0x00 /* Gets the firmware version */ +#define STM32G0_FW_GETVER_LEN 4 +#define STM32G0_FW_RSTGOBL 0x21 /* Reset and go to bootloader */ +#define STM32G0_FW_KEYWORD 0xa56959a6 + +/* ucsi_stm32g0_fw_info located at the end of the firmware */ +struct ucsi_stm32g0_fw_info { + u32 version; + u32 keyword; +}; + +struct ucsi_stm32g0 { + struct i2c_client *client; + struct i2c_client *i2c_bl; + bool in_bootloader; + u8 bl_version; + struct completion complete; + struct device *dev; + unsigned long flags; + const char *fw_name; + struct ucsi *ucsi; + bool suspended; + bool wakeup_event; +}; + +/* + * Bootloader commands helpers: + * - send command (2 bytes) + * - check ack + * Then either: + * - receive data + * - receive data + check ack + * - send data + check ack + * These operations depends on the command and have various length. + */ +static int ucsi_stm32g0_bl_check_ack(struct ucsi *ucsi) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + struct i2c_client *client = g0->i2c_bl; + unsigned char ack; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 1, + .buf = &ack, + }, + }; + int ret; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) { + dev_err(g0->dev, "i2c bl ack (%02x), error: %d\n", client->addr, ret); + + return ret < 0 ? ret : -EIO; + } + + /* The 'ack' byte should contain bootloader answer: ack/nack/busy */ + switch (ack) { + case STM32G0_I2C_BL_ACK: + return 0; + case STM32G0_I2C_BL_NACK: + return -ENOENT; + case STM32G0_I2C_BL_BUSY: + return -EBUSY; + default: + dev_err(g0->dev, "i2c bl ack (%02x), invalid byte: %02x\n", + client->addr, ack); + return -EINVAL; + } +} + +static int ucsi_stm32g0_bl_cmd_check_ack(struct ucsi *ucsi, unsigned int cmd, bool check_ack) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + struct i2c_client *client = g0->i2c_bl; + unsigned char buf[2]; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + }, + }; + int ret; + + /* + * Send STM32 bootloader command format is two bytes: + * - command code + * - XOR'ed command code + */ + buf[0] = cmd; + buf[1] = cmd ^ 0xff; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) { + dev_dbg(g0->dev, "i2c bl cmd %d (%02x), error: %d\n", cmd, client->addr, ret); + + return ret < 0 ? ret : -EIO; + } + + if (check_ack) + return ucsi_stm32g0_bl_check_ack(ucsi); + + return 0; +} + +static int ucsi_stm32g0_bl_cmd(struct ucsi *ucsi, unsigned int cmd) +{ + return ucsi_stm32g0_bl_cmd_check_ack(ucsi, cmd, true); +} + +static int ucsi_stm32g0_bl_rcv_check_ack(struct ucsi *ucsi, void *data, size_t len, bool check_ack) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + struct i2c_client *client = g0->i2c_bl; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = data, + }, + }; + int ret; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) { + dev_err(g0->dev, "i2c bl rcv %02x, error: %d\n", client->addr, ret); + + return ret < 0 ? ret : -EIO; + } + + if (check_ack) + return ucsi_stm32g0_bl_check_ack(ucsi); + + return 0; +} + +static int ucsi_stm32g0_bl_rcv(struct ucsi *ucsi, void *data, size_t len) +{ + return ucsi_stm32g0_bl_rcv_check_ack(ucsi, data, len, true); +} + +static int ucsi_stm32g0_bl_rcv_woack(struct ucsi *ucsi, void *data, size_t len) +{ + return ucsi_stm32g0_bl_rcv_check_ack(ucsi, data, len, false); +} + +static int ucsi_stm32g0_bl_send(struct ucsi *ucsi, void *data, size_t len) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + struct i2c_client *client = g0->i2c_bl; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = len, + .buf = data, + }, + }; + int ret; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) { + dev_err(g0->dev, "i2c bl send %02x, error: %d\n", client->addr, ret); + + return ret < 0 ? ret : -EIO; + } + + return ucsi_stm32g0_bl_check_ack(ucsi); +} + +/* Bootloader commands */ +static int ucsi_stm32g0_bl_get_version(struct ucsi *ucsi, u8 *bl_version) +{ + int ret; + + ret = ucsi_stm32g0_bl_cmd(ucsi, STM32_CMD_GVR); + if (ret) + return ret; + + return ucsi_stm32g0_bl_rcv(ucsi, bl_version, STM32_CMD_GVR_LEN); +} + +static int ucsi_stm32g0_bl_send_addr(struct ucsi *ucsi, u32 addr) +{ + u8 data8[STM32_CMD_ADDR_LEN]; + + /* Address format: 4 bytes addr (MSB first) + XOR'ed addr bytes */ + put_unaligned_be32(addr, data8); + data8[4] = data8[0] ^ data8[1] ^ data8[2] ^ data8[3]; + + return ucsi_stm32g0_bl_send(ucsi, data8, STM32_CMD_ADDR_LEN); +} + +static int ucsi_stm32g0_bl_global_mass_erase(struct ucsi *ucsi) +{ + u8 data8[4]; + u16 *data16 = (u16 *)&data8[0]; + int ret; + + data16[0] = STM32_CMD_GLOBAL_MASS_ERASE; + data8[2] = data8[0] ^ data8[1]; + + ret = ucsi_stm32g0_bl_cmd(ucsi, STM32_CMD_ERASE); + if (ret) + return ret; + + return ucsi_stm32g0_bl_send(ucsi, data8, STM32_CMD_ERASE_SPECIAL_LEN); +} + +static int ucsi_stm32g0_bl_write(struct ucsi *ucsi, u32 addr, const void *data, size_t len) +{ + u8 *data8; + int i, ret; + + if (!len || len > STM32G0_I2C_BL_SZ) + return -EINVAL; + + /* Write memory: len bytes -1, data up to 256 bytes + XOR'ed bytes */ + data8 = kmalloc(STM32G0_I2C_BL_SZ + 2, GFP_KERNEL); + if (!data8) + return -ENOMEM; + + ret = ucsi_stm32g0_bl_cmd(ucsi, STM32_CMD_WM); + if (ret) + goto free; + + ret = ucsi_stm32g0_bl_send_addr(ucsi, addr); + if (ret) + goto free; + + data8[0] = len - 1; + memcpy(data8 + 1, data, len); + data8[len + 1] = data8[0]; + for (i = 1; i <= len; i++) + data8[len + 1] ^= data8[i]; + + ret = ucsi_stm32g0_bl_send(ucsi, data8, len + 2); +free: + kfree(data8); + + return ret; +} + +static int ucsi_stm32g0_bl_read(struct ucsi *ucsi, u32 addr, void *data, size_t len) +{ + int ret; + + if (!len || len > STM32G0_I2C_BL_SZ) + return -EINVAL; + + ret = ucsi_stm32g0_bl_cmd(ucsi, STM32_CMD_RM); + if (ret) + return ret; + + ret = ucsi_stm32g0_bl_send_addr(ucsi, addr); + if (ret) + return ret; + + ret = ucsi_stm32g0_bl_cmd(ucsi, len - 1); + if (ret) + return ret; + + return ucsi_stm32g0_bl_rcv_woack(ucsi, data, len); +} + +/* Firmware commands (the same address as the bootloader) */ +static int ucsi_stm32g0_fw_cmd(struct ucsi *ucsi, unsigned int cmd) +{ + return ucsi_stm32g0_bl_cmd_check_ack(ucsi, cmd, false); +} + +static int ucsi_stm32g0_fw_rcv(struct ucsi *ucsi, void *data, size_t len) +{ + return ucsi_stm32g0_bl_rcv_woack(ucsi, data, len); +} + +/* UCSI ops */ +static int ucsi_stm32g0_read(struct ucsi *ucsi, unsigned int offset, void *val, size_t len) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + struct i2c_client *client = g0->client; + u8 reg = offset; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = ®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = val, + }, + }; + int ret; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) { + dev_err(g0->dev, "i2c read %02x, %02x error: %d\n", client->addr, reg, ret); + + return ret < 0 ? ret : -EIO; + } + + return 0; +} + +static int ucsi_stm32g0_async_write(struct ucsi *ucsi, unsigned int offset, const void *val, + size_t len) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + struct i2c_client *client = g0->client; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + } + }; + unsigned char *buf; + int ret; + + buf = kmalloc(len + 1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = offset; + memcpy(&buf[1], val, len); + msg[0].len = len + 1; + msg[0].buf = buf; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + kfree(buf); + if (ret != ARRAY_SIZE(msg)) { + dev_err(g0->dev, "i2c write %02x, %02x error: %d\n", client->addr, offset, ret); + + return ret < 0 ? ret : -EIO; + } + + return 0; +} + +static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const void *val, + size_t len) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + int ret; + + set_bit(COMMAND_PENDING, &g0->flags); + + ret = ucsi_stm32g0_async_write(ucsi, offset, val, len); + if (ret) + goto out_clear_bit; + + if (!wait_for_completion_timeout(&g0->complete, msecs_to_jiffies(5000))) + ret = -ETIMEDOUT; + +out_clear_bit: + clear_bit(COMMAND_PENDING, &g0->flags); + + return ret; +} + +static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data) +{ + struct ucsi_stm32g0 *g0 = data; + u32 cci; + int ret; + + if (g0->suspended) + g0->wakeup_event = true; + + ret = ucsi_stm32g0_read(g0->ucsi, UCSI_CCI, &cci, sizeof(cci)); + if (ret) + return IRQ_NONE; + + if (UCSI_CCI_CONNECTOR(cci)) + ucsi_connector_change(g0->ucsi, UCSI_CCI_CONNECTOR(cci)); + + if (test_bit(COMMAND_PENDING, &g0->flags) && + cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE)) + complete(&g0->complete); + + return IRQ_HANDLED; +} + +static const struct ucsi_operations ucsi_stm32g0_ops = { + .read = ucsi_stm32g0_read, + .sync_write = ucsi_stm32g0_sync_write, + .async_write = ucsi_stm32g0_async_write, +}; + +static int ucsi_stm32g0_register(struct ucsi *ucsi) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + struct i2c_client *client = g0->client; + int ret; + + /* Request alert interrupt */ + ret = request_threaded_irq(client->irq, NULL, ucsi_stm32g0_irq_handler, IRQF_ONESHOT, + dev_name(g0->dev), g0); + if (ret) { + dev_err(g0->dev, "request IRQ failed: %d\n", ret); + return ret; + } + + ret = ucsi_register(ucsi); + if (ret) { + dev_err_probe(g0->dev, ret, "ucsi_register failed\n"); + free_irq(client->irq, g0); + return ret; + } + + return 0; +} + +static void ucsi_stm32g0_unregister(struct ucsi *ucsi) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + struct i2c_client *client = g0->client; + + ucsi_unregister(ucsi); + free_irq(client->irq, g0); +} + +static void ucsi_stm32g0_fw_cb(const struct firmware *fw, void *context) +{ + struct ucsi_stm32g0 *g0; + const u8 *data, *end; + const struct ucsi_stm32g0_fw_info *fw_info; + u32 addr = STM32G0_MAIN_MEM_ADDR, ob, fw_version; + int ret, size; + + if (!context) + return; + + g0 = ucsi_get_drvdata(context); + + if (!fw) + goto fw_release; + + fw_info = (struct ucsi_stm32g0_fw_info *)(fw->data + fw->size - sizeof(*fw_info)); + + if (!g0->in_bootloader) { + /* Read running firmware version */ + ret = ucsi_stm32g0_fw_cmd(g0->ucsi, STM32G0_FW_GETVER); + if (ret) { + dev_err(g0->dev, "Get version cmd failed %d\n", ret); + goto fw_release; + } + ret = ucsi_stm32g0_fw_rcv(g0->ucsi, &fw_version, + STM32G0_FW_GETVER_LEN); + if (ret) { + dev_err(g0->dev, "Get version failed %d\n", ret); + goto fw_release; + } + + /* Sanity check on keyword and firmware version */ + if (fw_info->keyword != STM32G0_FW_KEYWORD || fw_info->version == fw_version) + goto fw_release; + + dev_info(g0->dev, "Flashing FW: %08x (%08x cur)\n", fw_info->version, fw_version); + + /* Switch to bootloader mode */ + ucsi_stm32g0_unregister(g0->ucsi); + ret = ucsi_stm32g0_fw_cmd(g0->ucsi, STM32G0_FW_RSTGOBL); + if (ret) { + dev_err(g0->dev, "bootloader cmd failed %d\n", ret); + goto fw_release; + } + g0->in_bootloader = true; + + /* STM32G0 reboot delay */ + msleep(100); + } + + ret = ucsi_stm32g0_bl_global_mass_erase(g0->ucsi); + if (ret) { + dev_err(g0->dev, "Erase failed %d\n", ret); + goto fw_release; + } + + data = fw->data; + end = fw->data + fw->size; + while (data < end) { + if ((end - data) < STM32G0_I2C_BL_SZ) + size = end - data; + else + size = STM32G0_I2C_BL_SZ; + + ret = ucsi_stm32g0_bl_write(g0->ucsi, addr, data, size); + if (ret) { + dev_err(g0->dev, "Write failed %d\n", ret); + goto fw_release; + } + addr += size; + data += size; + } + + dev_dbg(g0->dev, "Configure to boot from main flash\n"); + + ret = ucsi_stm32g0_bl_read(g0->ucsi, STM32G0_USER_OPTION_BYTES, &ob, sizeof(ob)); + if (ret) { + dev_err(g0->dev, "read user option bytes failed %d\n", ret); + goto fw_release; + } + + dev_dbg(g0->dev, "STM32G0_USER_OPTION_BYTES 0x%08x\n", ob); + + /* Configure user option bytes to boot from main flash next time */ + ob |= STM32G0_USER_OB_BOOT_MAIN; + + /* Writing option bytes will also reset G0 for updates to be loaded */ + ret = ucsi_stm32g0_bl_write(g0->ucsi, STM32G0_USER_OPTION_BYTES, &ob, sizeof(ob)); + if (ret) { + dev_err(g0->dev, "write user option bytes failed %d\n", ret); + goto fw_release; + } + + dev_info(g0->dev, "Starting, option bytes:0x%08x\n", ob); + + /* STM32G0 FW boot delay */ + msleep(500); + + /* Register UCSI interface */ + if (!ucsi_stm32g0_register(g0->ucsi)) + g0->in_bootloader = false; + +fw_release: + release_firmware(fw); +} + +static int ucsi_stm32g0_probe_bootloader(struct ucsi *ucsi) +{ + struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + int ret; + u16 ucsi_version; + + /* firmware-name is optional */ + if (device_property_present(g0->dev, "firmware-name")) { + ret = device_property_read_string(g0->dev, "firmware-name", &g0->fw_name); + if (ret < 0) + return dev_err_probe(g0->dev, ret, "Error reading firmware-name\n"); + } + + if (g0->fw_name) { + /* STM32G0 in bootloader mode communicates at reserved address 0x51 */ + g0->i2c_bl = i2c_new_dummy_device(g0->client->adapter, STM32G0_I2C_BL_ADDR); + if (IS_ERR(g0->i2c_bl)) { + ret = dev_err_probe(g0->dev, PTR_ERR(g0->i2c_bl), + "Failed to register bootloader I2C address\n"); + return ret; + } + } + + /* + * Try to guess if the STM32G0 is running a UCSI firmware. First probe the UCSI FW at its + * i2c address. Fallback to bootloader i2c address only if firmware-name is specified. + */ + ret = ucsi_stm32g0_read(ucsi, UCSI_VERSION, &ucsi_version, sizeof(ucsi_version)); + if (!ret || !g0->fw_name) + return ret; + + /* Speculatively read the bootloader version that has a known length. */ + ret = ucsi_stm32g0_bl_get_version(ucsi, &g0->bl_version); + if (ret < 0) { + i2c_unregister_device(g0->i2c_bl); + return ret; + } + + /* Device in bootloader mode */ + g0->in_bootloader = true; + dev_info(g0->dev, "Bootloader Version 0x%02x\n", g0->bl_version); + + return 0; +} + +static int ucsi_stm32g0_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ucsi_stm32g0 *g0; + int ret; + + g0 = devm_kzalloc(dev, sizeof(*g0), GFP_KERNEL); + if (!g0) + return -ENOMEM; + + g0->dev = dev; + g0->client = client; + init_completion(&g0->complete); + i2c_set_clientdata(client, g0); + + g0->ucsi = ucsi_create(dev, &ucsi_stm32g0_ops); + if (IS_ERR(g0->ucsi)) + return PTR_ERR(g0->ucsi); + + ucsi_set_drvdata(g0->ucsi, g0); + + ret = ucsi_stm32g0_probe_bootloader(g0->ucsi); + if (ret < 0) + goto destroy; + + /* + * Don't register in bootloader mode: wait for the firmware to be loaded and started before + * registering UCSI device. + */ + if (!g0->in_bootloader) { + ret = ucsi_stm32g0_register(g0->ucsi); + if (ret < 0) + goto freei2c; + } + + if (g0->fw_name) { + /* + * Asynchronously flash (e.g. bootloader mode) or update the running firmware, + * not to hang the boot process + */ + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, g0->fw_name, g0->dev, + GFP_KERNEL, g0->ucsi, ucsi_stm32g0_fw_cb); + if (ret < 0) { + dev_err_probe(dev, ret, "firmware request failed\n"); + goto unregister; + } + } + + return 0; + +unregister: + if (!g0->in_bootloader) + ucsi_stm32g0_unregister(g0->ucsi); +freei2c: + if (g0->fw_name) + i2c_unregister_device(g0->i2c_bl); +destroy: + ucsi_destroy(g0->ucsi); + + return ret; +} + +static void ucsi_stm32g0_remove(struct i2c_client *client) +{ + struct ucsi_stm32g0 *g0 = i2c_get_clientdata(client); + + if (!g0->in_bootloader) + ucsi_stm32g0_unregister(g0->ucsi); + if (g0->fw_name) + i2c_unregister_device(g0->i2c_bl); + ucsi_destroy(g0->ucsi); +} + +static int ucsi_stm32g0_suspend(struct device *dev) +{ + struct ucsi_stm32g0 *g0 = dev_get_drvdata(dev); + struct i2c_client *client = g0->client; + + if (g0->in_bootloader) + return 0; + + /* Keep the interrupt disabled until the i2c bus has been resumed */ + disable_irq(client->irq); + + g0->suspended = true; + g0->wakeup_event = false; + + if (device_may_wakeup(dev) || device_wakeup_path(dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int ucsi_stm32g0_resume(struct device *dev) +{ + struct ucsi_stm32g0 *g0 = dev_get_drvdata(dev); + struct i2c_client *client = g0->client; + + if (g0->in_bootloader) + return 0; + + if (device_may_wakeup(dev) || device_wakeup_path(dev)) + disable_irq_wake(client->irq); + + enable_irq(client->irq); + + /* Enforce any pending handler gets called to signal a wakeup_event */ + synchronize_irq(client->irq); + + if (g0->wakeup_event) + pm_wakeup_event(g0->dev, 0); + + g0->suspended = false; + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(ucsi_stm32g0_pm_ops, ucsi_stm32g0_suspend, ucsi_stm32g0_resume); + +static const struct of_device_id __maybe_unused ucsi_stm32g0_typec_of_match[] = { + { .compatible = "st,stm32g0-typec" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ucsi_stm32g0_typec_of_match); + +static const struct i2c_device_id ucsi_stm32g0_typec_i2c_devid[] = { + {"stm32g0-typec", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ucsi_stm32g0_typec_i2c_devid); + +static struct i2c_driver ucsi_stm32g0_i2c_driver = { + .driver = { + .name = "ucsi-stm32g0-i2c", + .of_match_table = of_match_ptr(ucsi_stm32g0_typec_of_match), + .pm = pm_sleep_ptr(&ucsi_stm32g0_pm_ops), + }, + .probe = ucsi_stm32g0_probe, + .remove = ucsi_stm32g0_remove, + .id_table = ucsi_stm32g0_typec_i2c_devid +}; +module_i2c_driver(ucsi_stm32g0_i2c_driver); + +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@foss.st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STM32G0 Type-C controller"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_ALIAS("platform:ucsi-stm32g0"); diff --git a/drivers/usb/typec/wusb3801.c b/drivers/usb/typec/wusb3801.c new file mode 100644 index 0000000000..6062875fb0 --- /dev/null +++ b/drivers/usb/typec/wusb3801.c @@ -0,0 +1,435 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Willsemi WUSB3801 Type-C port controller driver + * + * Copyright (C) 2022 Samuel Holland <samuel@sholland.org> + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/typec.h> + +#define WUSB3801_REG_DEVICE_ID 0x01 +#define WUSB3801_REG_CTRL0 0x02 +#define WUSB3801_REG_INT 0x03 +#define WUSB3801_REG_STAT 0x04 +#define WUSB3801_REG_CTRL1 0x05 +#define WUSB3801_REG_TEST00 0x06 +#define WUSB3801_REG_TEST01 0x07 +#define WUSB3801_REG_TEST02 0x08 +#define WUSB3801_REG_TEST03 0x09 +#define WUSB3801_REG_TEST04 0x0a +#define WUSB3801_REG_TEST05 0x0b +#define WUSB3801_REG_TEST06 0x0c +#define WUSB3801_REG_TEST07 0x0d +#define WUSB3801_REG_TEST08 0x0e +#define WUSB3801_REG_TEST09 0x0f +#define WUSB3801_REG_TEST0A 0x10 +#define WUSB3801_REG_TEST0B 0x11 +#define WUSB3801_REG_TEST0C 0x12 +#define WUSB3801_REG_TEST0D 0x13 +#define WUSB3801_REG_TEST0E 0x14 +#define WUSB3801_REG_TEST0F 0x15 +#define WUSB3801_REG_TEST10 0x16 +#define WUSB3801_REG_TEST11 0x17 +#define WUSB3801_REG_TEST12 0x18 + +#define WUSB3801_DEVICE_ID_VERSION_ID GENMASK(7, 3) +#define WUSB3801_DEVICE_ID_VENDOR_ID GENMASK(2, 0) + +#define WUSB3801_CTRL0_DIS_ACC_SUPPORT BIT(7) +#define WUSB3801_CTRL0_TRY GENMASK(6, 5) +#define WUSB3801_CTRL0_TRY_NONE (0x0 << 5) +#define WUSB3801_CTRL0_TRY_SNK (0x1 << 5) +#define WUSB3801_CTRL0_TRY_SRC (0x2 << 5) +#define WUSB3801_CTRL0_CURRENT GENMASK(4, 3) /* SRC */ +#define WUSB3801_CTRL0_CURRENT_DEFAULT (0x0 << 3) +#define WUSB3801_CTRL0_CURRENT_1_5A (0x1 << 3) +#define WUSB3801_CTRL0_CURRENT_3_0A (0x2 << 3) +#define WUSB3801_CTRL0_ROLE GENMASK(2, 1) +#define WUSB3801_CTRL0_ROLE_SNK (0x0 << 1) +#define WUSB3801_CTRL0_ROLE_SRC (0x1 << 1) +#define WUSB3801_CTRL0_ROLE_DRP (0x2 << 1) +#define WUSB3801_CTRL0_INT_MASK BIT(0) + +#define WUSB3801_INT_ATTACHED BIT(0) +#define WUSB3801_INT_DETACHED BIT(1) + +#define WUSB3801_STAT_VBUS_DETECTED BIT(7) +#define WUSB3801_STAT_CURRENT GENMASK(6, 5) /* SNK */ +#define WUSB3801_STAT_CURRENT_STANDBY (0x0 << 5) +#define WUSB3801_STAT_CURRENT_DEFAULT (0x1 << 5) +#define WUSB3801_STAT_CURRENT_1_5A (0x2 << 5) +#define WUSB3801_STAT_CURRENT_3_0A (0x3 << 5) +#define WUSB3801_STAT_PARTNER GENMASK(4, 2) +#define WUSB3801_STAT_PARTNER_STANDBY (0x0 << 2) +#define WUSB3801_STAT_PARTNER_SNK (0x1 << 2) +#define WUSB3801_STAT_PARTNER_SRC (0x2 << 2) +#define WUSB3801_STAT_PARTNER_AUDIO (0x3 << 2) +#define WUSB3801_STAT_PARTNER_DEBUG (0x4 << 2) +#define WUSB3801_STAT_ORIENTATION GENMASK(1, 0) +#define WUSB3801_STAT_ORIENTATION_NONE (0x0 << 0) +#define WUSB3801_STAT_ORIENTATION_CC1 (0x1 << 0) +#define WUSB3801_STAT_ORIENTATION_CC2 (0x2 << 0) +#define WUSB3801_STAT_ORIENTATION_BOTH (0x3 << 0) + +#define WUSB3801_CTRL1_SM_RESET BIT(0) + +#define WUSB3801_TEST01_VENDOR_SUB_ID (BIT(8) | BIT(6)) + +#define WUSB3801_TEST02_FORCE_ERR_RCY BIT(8) + +#define WUSB3801_TEST0A_WAIT_VBUS BIT(5) + +struct wusb3801 { + struct typec_capability cap; + struct device *dev; + struct typec_partner *partner; + struct typec_port *port; + struct regmap *regmap; + struct regulator *vbus_supply; + unsigned int partner_type; + enum typec_port_type port_type; + enum typec_pwr_opmode pwr_opmode; + bool vbus_on; +}; + +static enum typec_role wusb3801_get_default_role(struct wusb3801 *wusb3801) +{ + switch (wusb3801->port_type) { + case TYPEC_PORT_SRC: + return TYPEC_SOURCE; + case TYPEC_PORT_SNK: + return TYPEC_SINK; + case TYPEC_PORT_DRP: + default: + if (wusb3801->cap.prefer_role == TYPEC_SOURCE) + return TYPEC_SOURCE; + return TYPEC_SINK; + } +} + +static int wusb3801_map_port_type(enum typec_port_type type) +{ + switch (type) { + case TYPEC_PORT_SRC: + return WUSB3801_CTRL0_ROLE_SRC; + case TYPEC_PORT_SNK: + return WUSB3801_CTRL0_ROLE_SNK; + case TYPEC_PORT_DRP: + default: + return WUSB3801_CTRL0_ROLE_DRP; + } +} + +static int wusb3801_map_pwr_opmode(enum typec_pwr_opmode mode) +{ + switch (mode) { + case TYPEC_PWR_MODE_USB: + default: + return WUSB3801_CTRL0_CURRENT_DEFAULT; + case TYPEC_PWR_MODE_1_5A: + return WUSB3801_CTRL0_CURRENT_1_5A; + case TYPEC_PWR_MODE_3_0A: + return WUSB3801_CTRL0_CURRENT_3_0A; + } +} + +static unsigned int wusb3801_map_try_role(int role) +{ + switch (role) { + case TYPEC_NO_PREFERRED_ROLE: + default: + return WUSB3801_CTRL0_TRY_NONE; + case TYPEC_SINK: + return WUSB3801_CTRL0_TRY_SNK; + case TYPEC_SOURCE: + return WUSB3801_CTRL0_TRY_SRC; + } +} + +static enum typec_orientation wusb3801_unmap_orientation(unsigned int status) +{ + switch (status & WUSB3801_STAT_ORIENTATION) { + case WUSB3801_STAT_ORIENTATION_NONE: + case WUSB3801_STAT_ORIENTATION_BOTH: + default: + return TYPEC_ORIENTATION_NONE; + case WUSB3801_STAT_ORIENTATION_CC1: + return TYPEC_ORIENTATION_NORMAL; + case WUSB3801_STAT_ORIENTATION_CC2: + return TYPEC_ORIENTATION_REVERSE; + } +} + +static enum typec_pwr_opmode wusb3801_unmap_pwr_opmode(unsigned int status) +{ + switch (status & WUSB3801_STAT_CURRENT) { + case WUSB3801_STAT_CURRENT_STANDBY: + case WUSB3801_STAT_CURRENT_DEFAULT: + default: + return TYPEC_PWR_MODE_USB; + case WUSB3801_STAT_CURRENT_1_5A: + return TYPEC_PWR_MODE_1_5A; + case WUSB3801_STAT_CURRENT_3_0A: + return TYPEC_PWR_MODE_3_0A; + } +} + +static int wusb3801_try_role(struct typec_port *port, int role) +{ + struct wusb3801 *wusb3801 = typec_get_drvdata(port); + + return regmap_update_bits(wusb3801->regmap, WUSB3801_REG_CTRL0, + WUSB3801_CTRL0_TRY, + wusb3801_map_try_role(role)); +} + +static int wusb3801_port_type_set(struct typec_port *port, + enum typec_port_type type) +{ + struct wusb3801 *wusb3801 = typec_get_drvdata(port); + int ret; + + ret = regmap_update_bits(wusb3801->regmap, WUSB3801_REG_CTRL0, + WUSB3801_CTRL0_ROLE, + wusb3801_map_port_type(type)); + if (ret) + return ret; + + wusb3801->port_type = type; + + return 0; +} + +static const struct typec_operations wusb3801_typec_ops = { + .try_role = wusb3801_try_role, + .port_type_set = wusb3801_port_type_set, +}; + +static int wusb3801_hw_init(struct wusb3801 *wusb3801) +{ + return regmap_write(wusb3801->regmap, WUSB3801_REG_CTRL0, + wusb3801_map_try_role(wusb3801->cap.prefer_role) | + wusb3801_map_pwr_opmode(wusb3801->pwr_opmode) | + wusb3801_map_port_type(wusb3801->port_type)); +} + +static void wusb3801_hw_update(struct wusb3801 *wusb3801) +{ + struct typec_port *port = wusb3801->port; + struct device *dev = wusb3801->dev; + unsigned int partner_type, status; + int ret; + + ret = regmap_read(wusb3801->regmap, WUSB3801_REG_STAT, &status); + if (ret) { + dev_warn(dev, "Failed to read port status: %d\n", ret); + status = 0; + } + dev_dbg(dev, "status = 0x%02x\n", status); + + partner_type = status & WUSB3801_STAT_PARTNER; + + if (partner_type == WUSB3801_STAT_PARTNER_SNK) { + if (!wusb3801->vbus_on) { + ret = regulator_enable(wusb3801->vbus_supply); + if (ret) + dev_warn(dev, "Failed to enable VBUS: %d\n", ret); + wusb3801->vbus_on = true; + } + } else { + if (wusb3801->vbus_on) { + regulator_disable(wusb3801->vbus_supply); + wusb3801->vbus_on = false; + } + } + + if (partner_type != wusb3801->partner_type) { + struct typec_partner_desc desc = {}; + enum typec_data_role data_role; + enum typec_role pwr_role = wusb3801_get_default_role(wusb3801); + + switch (partner_type) { + case WUSB3801_STAT_PARTNER_STANDBY: + break; + case WUSB3801_STAT_PARTNER_SNK: + pwr_role = TYPEC_SOURCE; + break; + case WUSB3801_STAT_PARTNER_SRC: + pwr_role = TYPEC_SINK; + break; + case WUSB3801_STAT_PARTNER_AUDIO: + desc.accessory = TYPEC_ACCESSORY_AUDIO; + break; + case WUSB3801_STAT_PARTNER_DEBUG: + desc.accessory = TYPEC_ACCESSORY_DEBUG; + break; + } + + if (wusb3801->partner) { + typec_unregister_partner(wusb3801->partner); + wusb3801->partner = NULL; + } + + if (partner_type != WUSB3801_STAT_PARTNER_STANDBY) { + wusb3801->partner = typec_register_partner(port, &desc); + if (IS_ERR(wusb3801->partner)) + dev_err(dev, "Failed to register partner: %ld\n", + PTR_ERR(wusb3801->partner)); + } + + data_role = pwr_role == TYPEC_SOURCE ? TYPEC_HOST : TYPEC_DEVICE; + typec_set_data_role(port, data_role); + typec_set_pwr_role(port, pwr_role); + typec_set_vconn_role(port, pwr_role); + } + + typec_set_pwr_opmode(wusb3801->port, + partner_type == WUSB3801_STAT_PARTNER_SRC + ? wusb3801_unmap_pwr_opmode(status) + : wusb3801->pwr_opmode); + typec_set_orientation(wusb3801->port, + wusb3801_unmap_orientation(status)); + + wusb3801->partner_type = partner_type; +} + +static irqreturn_t wusb3801_irq(int irq, void *data) +{ + struct wusb3801 *wusb3801 = data; + unsigned int dummy; + + /* + * The interrupt register must be read in order to clear the IRQ, + * but all of the useful information is in the status register. + */ + regmap_read(wusb3801->regmap, WUSB3801_REG_INT, &dummy); + + wusb3801_hw_update(wusb3801); + + return IRQ_HANDLED; +} + +static const struct regmap_config config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = WUSB3801_REG_TEST12, +}; + +static int wusb3801_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct fwnode_handle *connector; + struct wusb3801 *wusb3801; + const char *cap_str; + int ret; + + wusb3801 = devm_kzalloc(dev, sizeof(*wusb3801), GFP_KERNEL); + if (!wusb3801) + return -ENOMEM; + + i2c_set_clientdata(client, wusb3801); + + wusb3801->dev = dev; + + wusb3801->regmap = devm_regmap_init_i2c(client, &config); + if (IS_ERR(wusb3801->regmap)) + return PTR_ERR(wusb3801->regmap); + + wusb3801->vbus_supply = devm_regulator_get(dev, "vbus"); + if (IS_ERR(wusb3801->vbus_supply)) + return PTR_ERR(wusb3801->vbus_supply); + + connector = device_get_named_child_node(dev, "connector"); + if (!connector) + return -ENODEV; + + ret = typec_get_fw_cap(&wusb3801->cap, connector); + if (ret) + goto err_put_connector; + wusb3801->port_type = wusb3801->cap.type; + + ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str); + if (ret) + goto err_put_connector; + + ret = typec_find_pwr_opmode(cap_str); + if (ret < 0 || ret == TYPEC_PWR_MODE_PD) + goto err_put_connector; + wusb3801->pwr_opmode = ret; + + /* Initialize the hardware with the devicetree settings. */ + ret = wusb3801_hw_init(wusb3801); + if (ret) + goto err_put_connector; + + wusb3801->cap.revision = USB_TYPEC_REV_1_2; + wusb3801->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO; + wusb3801->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG; + wusb3801->cap.orientation_aware = true; + wusb3801->cap.driver_data = wusb3801; + wusb3801->cap.ops = &wusb3801_typec_ops; + + wusb3801->port = typec_register_port(dev, &wusb3801->cap); + if (IS_ERR(wusb3801->port)) { + ret = PTR_ERR(wusb3801->port); + goto err_put_connector; + } + + /* Initialize the port attributes from the hardware state. */ + wusb3801_hw_update(wusb3801); + + ret = request_threaded_irq(client->irq, NULL, wusb3801_irq, + IRQF_ONESHOT, dev_name(dev), wusb3801); + if (ret) + goto err_unregister_port; + + fwnode_handle_put(connector); + + return 0; + +err_unregister_port: + typec_unregister_port(wusb3801->port); +err_put_connector: + fwnode_handle_put(connector); + + return ret; +} + +static void wusb3801_remove(struct i2c_client *client) +{ + struct wusb3801 *wusb3801 = i2c_get_clientdata(client); + + free_irq(client->irq, wusb3801); + + if (wusb3801->partner) + typec_unregister_partner(wusb3801->partner); + typec_unregister_port(wusb3801->port); + + if (wusb3801->vbus_on) + regulator_disable(wusb3801->vbus_supply); +} + +static const struct of_device_id wusb3801_of_match[] = { + { .compatible = "willsemi,wusb3801" }, + {} +}; +MODULE_DEVICE_TABLE(of, wusb3801_of_match); + +static struct i2c_driver wusb3801_driver = { + .probe = wusb3801_probe, + .remove = wusb3801_remove, + .driver = { + .name = "wusb3801", + .of_match_table = wusb3801_of_match, + }, +}; + +module_i2c_driver(wusb3801_driver); + +MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>"); +MODULE_DESCRIPTION("Willsemi WUSB3801 Type-C port controller driver"); +MODULE_LICENSE("GPL"); |