Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 264 deletions

diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c
deleted file mode 100644
index 781aeecc45..0000000000
--- a/drivers/video/backlight/cr_bllcd.c
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) Intel Corp. 2007.
- * All Rights Reserved.
- *
- * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
- * develop this driver.
- *
- * This file is part of the Carillo Ranch video subsystem driver.
- *
- * Authors:
- *   Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
- *   Alan Hourihane <alanh-at-tungstengraphics-dot-com>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/fb.h>
-#include <linux/backlight.h>
-#include <linux/lcd.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-/* The LVDS- and panel power controls sits on the
- * GPIO port of the ISA bridge.
- */
-
-#define CRVML_DEVICE_LPC    0x27B8
-#define CRVML_REG_GPIOBAR   0x48
-#define CRVML_REG_GPIOEN    0x4C
-#define CRVML_GPIOEN_BIT    (1 << 4)
-#define CRVML_PANEL_PORT    0x38
-#define CRVML_LVDS_ON       0x00000001
-#define CRVML_PANEL_ON      0x00000002
-#define CRVML_BACKLIGHT_OFF 0x00000004
-
-/* The PLL Clock register sits on Host bridge */
-#define CRVML_DEVICE_MCH   0x5001
-#define CRVML_REG_MCHBAR   0x44
-#define CRVML_REG_MCHEN    0x54
-#define CRVML_MCHEN_BIT    (1 << 28)
-#define CRVML_MCHMAP_SIZE  4096
-#define CRVML_REG_CLOCK    0xc3c
-#define CRVML_CLOCK_SHIFT  8
-#define CRVML_CLOCK_MASK   0x00000f00
-
-static struct pci_dev *lpc_dev;
-static u32 gpio_bar;
-
-struct cr_panel {
-	struct backlight_device *cr_backlight_device;
-	struct lcd_device *cr_lcd_device;
-};
-
-static int cr_backlight_set_intensity(struct backlight_device *bd)
-{
-	u32 addr = gpio_bar + CRVML_PANEL_PORT;
-	u32 cur = inl(addr);
-
-	if (backlight_get_brightness(bd) == 0) {
-		/* OFF */
-		cur |= CRVML_BACKLIGHT_OFF;
-		outl(cur, addr);
-	} else {
-		/* FULL ON */
-		cur &= ~CRVML_BACKLIGHT_OFF;
-		outl(cur, addr);
-	}
-
-	return 0;
-}
-
-static int cr_backlight_get_intensity(struct backlight_device *bd)
-{
-	u32 addr = gpio_bar + CRVML_PANEL_PORT;
-	u32 cur = inl(addr);
-	u8 intensity;
-
-	if (cur & CRVML_BACKLIGHT_OFF)
-		intensity = 0;
-	else
-		intensity = 1;
-
-	return intensity;
-}
-
-static const struct backlight_ops cr_backlight_ops = {
-	.get_brightness = cr_backlight_get_intensity,
-	.update_status = cr_backlight_set_intensity,
-};
-
-static void cr_panel_on(void)
-{
-	u32 addr = gpio_bar + CRVML_PANEL_PORT;
-	u32 cur = inl(addr);
-
-	if (!(cur & CRVML_PANEL_ON)) {
-		/* Make sure LVDS controller is down. */
-		if (cur & 0x00000001) {
-			cur &= ~CRVML_LVDS_ON;
-			outl(cur, addr);
-		}
-		/* Power up Panel */
-		schedule_timeout(HZ / 10);
-		cur |= CRVML_PANEL_ON;
-		outl(cur, addr);
-	}
-
-	/* Power up LVDS controller */
-
-	if (!(cur & CRVML_LVDS_ON)) {
-		schedule_timeout(HZ / 10);
-		outl(cur | CRVML_LVDS_ON, addr);
-	}
-}
-
-static void cr_panel_off(void)
-{
-	u32 addr = gpio_bar + CRVML_PANEL_PORT;
-	u32 cur = inl(addr);
-
-	/* Power down LVDS controller first to avoid high currents */
-	if (cur & CRVML_LVDS_ON) {
-		cur &= ~CRVML_LVDS_ON;
-		outl(cur, addr);
-	}
-	if (cur & CRVML_PANEL_ON) {
-		schedule_timeout(HZ / 10);
-		outl(cur & ~CRVML_PANEL_ON, addr);
-	}
-}
-
-static int cr_lcd_set_power(struct lcd_device *ld, int power)
-{
-	if (power == FB_BLANK_UNBLANK)
-		cr_panel_on();
-	if (power == FB_BLANK_POWERDOWN)
-		cr_panel_off();
-
-	return 0;
-}
-
-static struct lcd_ops cr_lcd_ops = {
-	.set_power = cr_lcd_set_power,
-};
-
-static int cr_backlight_probe(struct platform_device *pdev)
-{
-	struct backlight_properties props;
-	struct backlight_device *bdp;
-	struct lcd_device *ldp;
-	struct cr_panel *crp;
-	u8 dev_en;
-
-	lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
-					CRVML_DEVICE_LPC, NULL);
-	if (!lpc_dev) {
-		pr_err("INTEL CARILLO RANCH LPC not found.\n");
-		return -ENODEV;
-	}
-
-	pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en);
-	if (!(dev_en & CRVML_GPIOEN_BIT)) {
-		pr_err("Carillo Ranch GPIO device was not enabled.\n");
-		pci_dev_put(lpc_dev);
-		return -ENODEV;
-	}
-
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.type = BACKLIGHT_RAW;
-	bdp = devm_backlight_device_register(&pdev->dev, "cr-backlight",
-					&pdev->dev, NULL, &cr_backlight_ops,
-					&props);
-	if (IS_ERR(bdp)) {
-		pci_dev_put(lpc_dev);
-		return PTR_ERR(bdp);
-	}
-
-	ldp = devm_lcd_device_register(&pdev->dev, "cr-lcd", &pdev->dev, NULL,
-					&cr_lcd_ops);
-	if (IS_ERR(ldp)) {
-		pci_dev_put(lpc_dev);
-		return PTR_ERR(ldp);
-	}
-
-	pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR,
-			      &gpio_bar);
-	gpio_bar &= ~0x3F;
-
-	crp = devm_kzalloc(&pdev->dev, sizeof(*crp), GFP_KERNEL);
-	if (!crp) {
-		pci_dev_put(lpc_dev);
-		return -ENOMEM;
-	}
-
-	crp->cr_backlight_device = bdp;
-	crp->cr_lcd_device = ldp;
-	crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK;
-	crp->cr_backlight_device->props.brightness = 0;
-	cr_backlight_set_intensity(crp->cr_backlight_device);
-	cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK);
-
-	platform_set_drvdata(pdev, crp);
-
-	return 0;
-}
-
-static void cr_backlight_remove(struct platform_device *pdev)
-{
-	struct cr_panel *crp = platform_get_drvdata(pdev);
-
-	crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN;
-	crp->cr_backlight_device->props.brightness = 0;
-	crp->cr_backlight_device->props.max_brightness = 0;
-	cr_backlight_set_intensity(crp->cr_backlight_device);
-	cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN);
-	pci_dev_put(lpc_dev);
-}
-
-static struct platform_driver cr_backlight_driver = {
-	.probe = cr_backlight_probe,
-	.remove_new = cr_backlight_remove,
-	.driver = {
-		   .name = "cr_backlight",
-		   },
-};
-
-static struct platform_device *crp;
-
-static int __init cr_backlight_init(void)
-{
-	int ret = platform_driver_register(&cr_backlight_driver);
-
-	if (ret)
-		return ret;
-
-	crp = platform_device_register_simple("cr_backlight", -1, NULL, 0);
-	if (IS_ERR(crp)) {
-		platform_driver_unregister(&cr_backlight_driver);
-		return PTR_ERR(crp);
-	}
-
-	pr_info("Carillo Ranch Backlight Driver Initialized.\n");
-
-	return 0;
-}
-
-static void __exit cr_backlight_exit(void)
-{
-	platform_device_unregister(crp);
-	platform_driver_unregister(&cr_backlight_driver);
-}
-
-module_init(cr_backlight_init);
-module_exit(cr_backlight_exit);
-
-MODULE_AUTHOR("Tungsten Graphics Inc.");
-MODULE_DESCRIPTION("Carillo Ranch Backlight Driver");
-MODULE_LICENSE("GPL");