Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 183 insertions, 0 deletions

diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
new file mode 100644
index 0000000000..090cbbf9e1
--- /dev/null
+++ b/drivers/w1/masters/mxc_w1.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2005-2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Luotao Fu, kernel@pengutronix.de
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+
+#include <linux/w1.h>
+
+/*
+ * MXC W1 Register offsets
+ */
+#define MXC_W1_CONTROL		0x00
+# define MXC_W1_CONTROL_RDST	BIT(3)
+# define MXC_W1_CONTROL_WR(x)	BIT(5 - (x))
+# define MXC_W1_CONTROL_PST	BIT(6)
+# define MXC_W1_CONTROL_RPP	BIT(7)
+#define MXC_W1_TIME_DIVIDER	0x02
+#define MXC_W1_RESET		0x04
+# define MXC_W1_RESET_RST	BIT(0)
+
+struct mxc_w1_device {
+	void __iomem *regs;
+	struct clk *clk;
+	struct w1_bus_master bus_master;
+};
+
+/*
+ * this is the low level routine to
+ * reset the device on the One Wire interface
+ * on the hardware
+ */
+static u8 mxc_w1_ds2_reset_bus(void *data)
+{
+	struct mxc_w1_device *dev = data;
+	ktime_t timeout;
+
+	writeb(MXC_W1_CONTROL_RPP, dev->regs + MXC_W1_CONTROL);
+
+	/* Wait for reset sequence 511+512us, use 1500us for sure */
+	timeout = ktime_add_us(ktime_get(), 1500);
+
+	udelay(511 + 512);
+
+	do {
+		u8 ctrl = readb(dev->regs + MXC_W1_CONTROL);
+
+		/* PST bit is valid after the RPP bit is self-cleared */
+		if (!(ctrl & MXC_W1_CONTROL_RPP))
+			return !(ctrl & MXC_W1_CONTROL_PST);
+	} while (ktime_before(ktime_get(), timeout));
+
+	return 1;
+}
+
+/*
+ * this is the low level routine to read/write a bit on the One Wire
+ * interface on the hardware. It does write 0 if parameter bit is set
+ * to 0, otherwise a write 1/read.
+ */
+static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
+{
+	struct mxc_w1_device *dev = data;
+	ktime_t timeout;
+
+	writeb(MXC_W1_CONTROL_WR(bit), dev->regs + MXC_W1_CONTROL);
+
+	/* Wait for read/write bit (60us, Max 120us), use 200us for sure */
+	timeout = ktime_add_us(ktime_get(), 200);
+
+	udelay(60);
+
+	do {
+		u8 ctrl = readb(dev->regs + MXC_W1_CONTROL);
+
+		/* RDST bit is valid after the WR1/RD bit is self-cleared */
+		if (!(ctrl & MXC_W1_CONTROL_WR(bit)))
+			return !!(ctrl & MXC_W1_CONTROL_RDST);
+	} while (ktime_before(ktime_get(), timeout));
+
+	return 0;
+}
+
+static int mxc_w1_probe(struct platform_device *pdev)
+{
+	struct mxc_w1_device *mdev;
+	unsigned long clkrate;
+	unsigned int clkdiv;
+	int err;
+
+	mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device),
+			    GFP_KERNEL);
+	if (!mdev)
+		return -ENOMEM;
+
+	mdev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(mdev->clk))
+		return PTR_ERR(mdev->clk);
+
+	err = clk_prepare_enable(mdev->clk);
+	if (err)
+		return err;
+
+	clkrate = clk_get_rate(mdev->clk);
+	if (clkrate < 10000000)
+		dev_warn(&pdev->dev,
+			 "Low clock frequency causes improper function\n");
+
+	clkdiv = DIV_ROUND_CLOSEST(clkrate, 1000000);
+	clkrate /= clkdiv;
+	if ((clkrate < 980000) || (clkrate > 1020000))
+		dev_warn(&pdev->dev,
+			 "Incorrect time base frequency %lu Hz\n", clkrate);
+
+	mdev->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mdev->regs)) {
+		err = PTR_ERR(mdev->regs);
+		goto out_disable_clk;
+	}
+
+	/* Software reset 1-Wire module */
+	writeb(MXC_W1_RESET_RST, mdev->regs + MXC_W1_RESET);
+	writeb(0, mdev->regs + MXC_W1_RESET);
+
+	writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
+
+	mdev->bus_master.data = mdev;
+	mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
+	mdev->bus_master.touch_bit = mxc_w1_ds2_touch_bit;
+
+	platform_set_drvdata(pdev, mdev);
+
+	err = w1_add_master_device(&mdev->bus_master);
+	if (err)
+		goto out_disable_clk;
+
+	return 0;
+
+out_disable_clk:
+	clk_disable_unprepare(mdev->clk);
+	return err;
+}
+
+/*
+ * disassociate the w1 device from the driver
+ */
+static int mxc_w1_remove(struct platform_device *pdev)
+{
+	struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
+
+	w1_remove_master_device(&mdev->bus_master);
+
+	clk_disable_unprepare(mdev->clk);
+
+	return 0;
+}
+
+static const struct of_device_id mxc_w1_dt_ids[] = {
+	{ .compatible = "fsl,imx21-owire" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
+
+static struct platform_driver mxc_w1_driver = {
+	.driver = {
+		.name = "mxc_w1",
+		.of_match_table = mxc_w1_dt_ids,
+	},
+	.probe = mxc_w1_probe,
+	.remove = mxc_w1_remove,
+};
+module_platform_driver(mxc_w1_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale Semiconductors Inc");
+MODULE_DESCRIPTION("Driver for One-Wire on MXC");