summaryrefslogtreecommitdiffstats
path: root/include/drm/drm_connector.h
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /include/drm/drm_connector.h
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'include/drm/drm_connector.h')
-rw-r--r--include/drm/drm_connector.h2120
1 files changed, 2120 insertions, 0 deletions
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
new file mode 100644
index 0000000000..d300fde6c1
--- /dev/null
+++ b/include/drm/drm_connector.h
@@ -0,0 +1,2120 @@
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef __DRM_CONNECTOR_H__
+#define __DRM_CONNECTOR_H__
+
+#include <linux/list.h>
+#include <linux/llist.h>
+#include <linux/ctype.h>
+#include <linux/hdmi.h>
+#include <linux/notifier.h>
+#include <drm/drm_mode_object.h>
+#include <drm/drm_util.h>
+#include <drm/drm_property.h>
+
+#include <uapi/drm/drm_mode.h>
+
+struct drm_connector_helper_funcs;
+struct drm_modeset_acquire_ctx;
+struct drm_device;
+struct drm_crtc;
+struct drm_encoder;
+struct drm_panel;
+struct drm_property;
+struct drm_property_blob;
+struct drm_printer;
+struct drm_privacy_screen;
+struct edid;
+struct i2c_adapter;
+
+enum drm_connector_force {
+ DRM_FORCE_UNSPECIFIED,
+ DRM_FORCE_OFF,
+ DRM_FORCE_ON, /* force on analog part normally */
+ DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
+};
+
+/**
+ * enum drm_connector_status - status for a &drm_connector
+ *
+ * This enum is used to track the connector status. There are no separate
+ * #defines for the uapi!
+ */
+enum drm_connector_status {
+ /**
+ * @connector_status_connected: The connector is definitely connected to
+ * a sink device, and can be enabled.
+ */
+ connector_status_connected = 1,
+ /**
+ * @connector_status_disconnected: The connector isn't connected to a
+ * sink device which can be autodetect. For digital outputs like DP or
+ * HDMI (which can be realiable probed) this means there's really
+ * nothing there. It is driver-dependent whether a connector with this
+ * status can be lit up or not.
+ */
+ connector_status_disconnected = 2,
+ /**
+ * @connector_status_unknown: The connector's status could not be
+ * reliably detected. This happens when probing would either cause
+ * flicker (like load-detection when the connector is in use), or when a
+ * hardware resource isn't available (like when load-detection needs a
+ * free CRTC). It should be possible to light up the connector with one
+ * of the listed fallback modes. For default configuration userspace
+ * should only try to light up connectors with unknown status when
+ * there's not connector with @connector_status_connected.
+ */
+ connector_status_unknown = 3,
+};
+
+/**
+ * enum drm_connector_registration_state - userspace registration status for
+ * a &drm_connector
+ *
+ * This enum is used to track the status of initializing a connector and
+ * registering it with userspace, so that DRM can prevent bogus modesets on
+ * connectors that no longer exist.
+ */
+enum drm_connector_registration_state {
+ /**
+ * @DRM_CONNECTOR_INITIALIZING: The connector has just been created,
+ * but has yet to be exposed to userspace. There should be no
+ * additional restrictions to how the state of this connector may be
+ * modified.
+ */
+ DRM_CONNECTOR_INITIALIZING = 0,
+
+ /**
+ * @DRM_CONNECTOR_REGISTERED: The connector has been fully initialized
+ * and registered with sysfs, as such it has been exposed to
+ * userspace. There should be no additional restrictions to how the
+ * state of this connector may be modified.
+ */
+ DRM_CONNECTOR_REGISTERED = 1,
+
+ /**
+ * @DRM_CONNECTOR_UNREGISTERED: The connector has either been exposed
+ * to userspace and has since been unregistered and removed from
+ * userspace, or the connector was unregistered before it had a chance
+ * to be exposed to userspace (e.g. still in the
+ * @DRM_CONNECTOR_INITIALIZING state). When a connector is
+ * unregistered, there are additional restrictions to how its state
+ * may be modified:
+ *
+ * - An unregistered connector may only have its DPMS changed from
+ * On->Off. Once DPMS is changed to Off, it may not be switched back
+ * to On.
+ * - Modesets are not allowed on unregistered connectors, unless they
+ * would result in disabling its assigned CRTCs. This means
+ * disabling a CRTC on an unregistered connector is OK, but enabling
+ * one is not.
+ * - Removing a CRTC from an unregistered connector is OK, but new
+ * CRTCs may never be assigned to an unregistered connector.
+ */
+ DRM_CONNECTOR_UNREGISTERED = 2,
+};
+
+enum subpixel_order {
+ SubPixelUnknown = 0,
+ SubPixelHorizontalRGB,
+ SubPixelHorizontalBGR,
+ SubPixelVerticalRGB,
+ SubPixelVerticalBGR,
+ SubPixelNone,
+
+};
+
+/**
+ * enum drm_connector_tv_mode - Analog TV output mode
+ *
+ * This enum is used to indicate the TV output mode used on an analog TV
+ * connector.
+ *
+ * WARNING: The values of this enum is uABI since they're exposed in the
+ * "TV mode" connector property.
+ */
+enum drm_connector_tv_mode {
+ /**
+ * @DRM_MODE_TV_MODE_NTSC: CCIR System M (aka 525-lines)
+ * together with the NTSC Color Encoding.
+ */
+ DRM_MODE_TV_MODE_NTSC,
+
+ /**
+ * @DRM_MODE_TV_MODE_NTSC_443: Variant of
+ * @DRM_MODE_TV_MODE_NTSC. Uses a color subcarrier frequency
+ * of 4.43 MHz.
+ */
+ DRM_MODE_TV_MODE_NTSC_443,
+
+ /**
+ * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC
+ * used in Japan. Uses a black level equals to the blanking
+ * level.
+ */
+ DRM_MODE_TV_MODE_NTSC_J,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL: CCIR System B together with the PAL
+ * color system.
+ */
+ DRM_MODE_TV_MODE_PAL,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines)
+ * together with the PAL color encoding
+ */
+ DRM_MODE_TV_MODE_PAL_M,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL
+ * color encoding. It uses 625 lines, but has a color subcarrier
+ * frequency of 3.58MHz, the SECAM color space, and narrower
+ * channels compared to most of the other PAL variants.
+ */
+ DRM_MODE_TV_MODE_PAL_N,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM: CCIR System B together with the
+ * SECAM color system.
+ */
+ DRM_MODE_TV_MODE_SECAM,
+
+ /**
+ * @DRM_MODE_TV_MODE_MAX: Number of analog TV output modes.
+ *
+ * Internal implementation detail; this is not uABI.
+ */
+ DRM_MODE_TV_MODE_MAX,
+};
+
+/**
+ * struct drm_scrambling: sink's scrambling support.
+ */
+struct drm_scrambling {
+ /**
+ * @supported: scrambling supported for rates > 340 Mhz.
+ */
+ bool supported;
+ /**
+ * @low_rates: scrambling supported for rates <= 340 Mhz.
+ */
+ bool low_rates;
+};
+
+/*
+ * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink
+ *
+ * Provides SCDC register support and capabilities related information on a
+ * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0.
+ */
+struct drm_scdc {
+ /**
+ * @supported: status control & data channel present.
+ */
+ bool supported;
+ /**
+ * @read_request: sink is capable of generating scdc read request.
+ */
+ bool read_request;
+ /**
+ * @scrambling: sink's scrambling capabilities
+ */
+ struct drm_scrambling scrambling;
+};
+
+/**
+ * struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink
+ *
+ * Describes the DSC support provided by HDMI 2.1 sink.
+ * The information is fetched fom additional HFVSDB blocks defined
+ * for HDMI 2.1.
+ */
+struct drm_hdmi_dsc_cap {
+ /** @v_1p2: flag for dsc1.2 version support by sink */
+ bool v_1p2;
+
+ /** @native_420: Does sink support DSC with 4:2:0 compression */
+ bool native_420;
+
+ /**
+ * @all_bpp: Does sink support all bpp with 4:4:4: or 4:2:2
+ * compressed formats
+ */
+ bool all_bpp;
+
+ /**
+ * @bpc_supported: compressed bpc supported by sink : 10, 12 or 16 bpc
+ */
+ u8 bpc_supported;
+
+ /** @max_slices: maximum number of Horizontal slices supported by */
+ u8 max_slices;
+
+ /** @clk_per_slice : max pixel clock in MHz supported per slice */
+ int clk_per_slice;
+
+ /** @max_lanes : dsc max lanes supported for Fixed rate Link training */
+ u8 max_lanes;
+
+ /** @max_frl_rate_per_lane : maximum frl rate with DSC per lane */
+ u8 max_frl_rate_per_lane;
+
+ /** @total_chunk_kbytes: max size of chunks in KBs supported per line*/
+ u8 total_chunk_kbytes;
+};
+
+/**
+ * struct drm_hdmi_info - runtime information about the connected HDMI sink
+ *
+ * Describes if a given display supports advanced HDMI 2.0 features.
+ * This information is available in CEA-861-F extension blocks (like HF-VSDB).
+ */
+struct drm_hdmi_info {
+ /** @scdc: sink's scdc support and capabilities */
+ struct drm_scdc scdc;
+
+ /**
+ * @y420_vdb_modes: bitmap of modes which can support ycbcr420
+ * output only (not normal RGB/YCBCR444/422 outputs). The max VIC
+ * defined by the CEA-861-G spec is 219, so the size is 256 bits to map
+ * up to 256 VICs.
+ */
+ unsigned long y420_vdb_modes[BITS_TO_LONGS(256)];
+
+ /**
+ * @y420_cmdb_modes: bitmap of modes which can support ycbcr420
+ * output also, along with normal HDMI outputs. The max VIC defined by
+ * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256
+ * VICs.
+ */
+ unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)];
+
+ /** @y420_dc_modes: bitmap of deep color support index */
+ u8 y420_dc_modes;
+
+ /** @max_frl_rate_per_lane: support fixed rate link */
+ u8 max_frl_rate_per_lane;
+
+ /** @max_lanes: supported by sink */
+ u8 max_lanes;
+
+ /** @dsc_cap: DSC capabilities of the sink */
+ struct drm_hdmi_dsc_cap dsc_cap;
+};
+
+/**
+ * enum drm_link_status - connector's link_status property value
+ *
+ * This enum is used as the connector's link status property value.
+ * It is set to the values defined in uapi.
+ *
+ * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful
+ * link training
+ * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training
+ * failure
+ */
+enum drm_link_status {
+ DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD,
+ DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD,
+};
+
+/**
+ * enum drm_panel_orientation - panel_orientation info for &drm_display_info
+ *
+ * This enum is used to track the (LCD) panel orientation. There are no
+ * separate #defines for the uapi!
+ *
+ * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any
+ * panel orientation information (normal
+ * for non panels) in this case the "panel
+ * orientation" connector prop will not be
+ * attached.
+ * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the
+ * top side of the device's casing.
+ * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the
+ * bottom side of the device's casing, iow
+ * the panel is mounted upside-down.
+ * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the
+ * top side of the device's casing.
+ * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the
+ * top side of the device's casing.
+ */
+enum drm_panel_orientation {
+ DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1,
+ DRM_MODE_PANEL_ORIENTATION_NORMAL = 0,
+ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,
+ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+/**
+ * struct drm_monitor_range_info - Panel's Monitor range in EDID for
+ * &drm_display_info
+ *
+ * This struct is used to store a frequency range supported by panel
+ * as parsed from EDID's detailed monitor range descriptor block.
+ *
+ * @min_vfreq: This is the min supported refresh rate in Hz from
+ * EDID's detailed monitor range.
+ * @max_vfreq: This is the max supported refresh rate in Hz from
+ * EDID's detailed monitor range
+ */
+struct drm_monitor_range_info {
+ u16 min_vfreq;
+ u16 max_vfreq;
+};
+
+/**
+ * struct drm_luminance_range_info - Panel's luminance range for
+ * &drm_display_info. Calculated using data in EDID
+ *
+ * This struct is used to store a luminance range supported by panel
+ * as calculated using data from EDID's static hdr metadata.
+ *
+ * @min_luminance: This is the min supported luminance value
+ *
+ * @max_luminance: This is the max supported luminance value
+ */
+struct drm_luminance_range_info {
+ u32 min_luminance;
+ u32 max_luminance;
+};
+
+/**
+ * enum drm_privacy_screen_status - privacy screen status
+ *
+ * This enum is used to track and control the state of the integrated privacy
+ * screen present on some display panels, via the "privacy-screen sw-state"
+ * and "privacy-screen hw-state" properties. Note the _LOCKED enum values
+ * are only valid for the "privacy-screen hw-state" property.
+ *
+ * @PRIVACY_SCREEN_DISABLED:
+ * The privacy-screen on the panel is disabled
+ * @PRIVACY_SCREEN_ENABLED:
+ * The privacy-screen on the panel is enabled
+ * @PRIVACY_SCREEN_DISABLED_LOCKED:
+ * The privacy-screen on the panel is disabled and locked (cannot be changed)
+ * @PRIVACY_SCREEN_ENABLED_LOCKED:
+ * The privacy-screen on the panel is enabled and locked (cannot be changed)
+ */
+enum drm_privacy_screen_status {
+ PRIVACY_SCREEN_DISABLED = 0,
+ PRIVACY_SCREEN_ENABLED,
+ PRIVACY_SCREEN_DISABLED_LOCKED,
+ PRIVACY_SCREEN_ENABLED_LOCKED,
+};
+
+/**
+ * enum drm_colorspace - color space
+ *
+ * This enum is a consolidated colorimetry list supported by HDMI and
+ * DP protocol standard. The respective connectors will register
+ * a property with the subset of this list (supported by that
+ * respective protocol). Userspace will set the colorspace through
+ * a colorspace property which will be created and exposed to
+ * userspace.
+ *
+ * DP definitions come from the DP v2.0 spec
+ * HDMI definitions come from the CTA-861-H spec
+ *
+ * A note on YCC and RGB variants:
+ *
+ * Since userspace is not aware of the encoding on the wire
+ * (RGB or YCbCr), drivers are free to pick the appropriate
+ * variant, regardless of what userspace selects. E.g., if
+ * BT2020_RGB is selected by userspace a driver will pick
+ * BT2020_YCC if the encoding on the wire is YUV444 or YUV420.
+ *
+ * @DRM_MODE_COLORIMETRY_DEFAULT:
+ * Driver specific behavior.
+ * @DRM_MODE_COLORIMETRY_NO_DATA:
+ * Driver specific behavior.
+ * @DRM_MODE_COLORIMETRY_SMPTE_170M_YCC:
+ * (HDMI)
+ * SMPTE ST 170M colorimetry format
+ * @DRM_MODE_COLORIMETRY_BT709_YCC:
+ * (HDMI, DP)
+ * ITU-R BT.709 colorimetry format
+ * @DRM_MODE_COLORIMETRY_XVYCC_601:
+ * (HDMI, DP)
+ * xvYCC601 colorimetry format
+ * @DRM_MODE_COLORIMETRY_XVYCC_709:
+ * (HDMI, DP)
+ * xvYCC709 colorimetry format
+ * @DRM_MODE_COLORIMETRY_SYCC_601:
+ * (HDMI, DP)
+ * sYCC601 colorimetry format
+ * @DRM_MODE_COLORIMETRY_OPYCC_601:
+ * (HDMI, DP)
+ * opYCC601 colorimetry format
+ * @DRM_MODE_COLORIMETRY_OPRGB:
+ * (HDMI, DP)
+ * opRGB colorimetry format
+ * @DRM_MODE_COLORIMETRY_BT2020_CYCC:
+ * (HDMI, DP)
+ * ITU-R BT.2020 Y'c C'bc C'rc (constant luminance) colorimetry format
+ * @DRM_MODE_COLORIMETRY_BT2020_RGB:
+ * (HDMI, DP)
+ * ITU-R BT.2020 R' G' B' colorimetry format
+ * @DRM_MODE_COLORIMETRY_BT2020_YCC:
+ * (HDMI, DP)
+ * ITU-R BT.2020 Y' C'b C'r colorimetry format
+ * @DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65:
+ * (HDMI)
+ * SMPTE ST 2113 P3D65 colorimetry format
+ * @DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER:
+ * (HDMI)
+ * SMPTE ST 2113 P3DCI colorimetry format
+ * @DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED:
+ * (DP)
+ * RGB wide gamut fixed point colorimetry format
+ * @DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT:
+ * (DP)
+ * RGB wide gamut floating point
+ * (scRGB (IEC 61966-2-2)) colorimetry format
+ * @DRM_MODE_COLORIMETRY_BT601_YCC:
+ * (DP)
+ * ITU-R BT.601 colorimetry format
+ * The DP spec does not say whether this is the 525 or the 625
+ * line version.
+ */
+enum drm_colorspace {
+ /* For Default case, driver will set the colorspace */
+ DRM_MODE_COLORIMETRY_DEFAULT = 0,
+ /* CEA 861 Normal Colorimetry options */
+ DRM_MODE_COLORIMETRY_NO_DATA = 0,
+ DRM_MODE_COLORIMETRY_SMPTE_170M_YCC = 1,
+ DRM_MODE_COLORIMETRY_BT709_YCC = 2,
+ /* CEA 861 Extended Colorimetry Options */
+ DRM_MODE_COLORIMETRY_XVYCC_601 = 3,
+ DRM_MODE_COLORIMETRY_XVYCC_709 = 4,
+ DRM_MODE_COLORIMETRY_SYCC_601 = 5,
+ DRM_MODE_COLORIMETRY_OPYCC_601 = 6,
+ DRM_MODE_COLORIMETRY_OPRGB = 7,
+ DRM_MODE_COLORIMETRY_BT2020_CYCC = 8,
+ DRM_MODE_COLORIMETRY_BT2020_RGB = 9,
+ DRM_MODE_COLORIMETRY_BT2020_YCC = 10,
+ /* Additional Colorimetry extension added as part of CTA 861.G */
+ DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65 = 11,
+ DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER = 12,
+ /* Additional Colorimetry Options added for DP 1.4a VSC Colorimetry Format */
+ DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED = 13,
+ DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT = 14,
+ DRM_MODE_COLORIMETRY_BT601_YCC = 15,
+ /* not a valid value; merely used for counting */
+ DRM_MODE_COLORIMETRY_COUNT
+};
+
+/**
+ * enum drm_bus_flags - bus_flags info for &drm_display_info
+ *
+ * This enum defines signal polarities and clock edge information for signals on
+ * a bus as bitmask flags.
+ *
+ * The clock edge information is conveyed by two sets of symbols,
+ * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is
+ * used to describe a bus from the point of view of the transmitter, the
+ * \*_DRIVE_\* flags should be used. When used from the point of view of the
+ * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and
+ * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and
+ * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE
+ * respectively. This simplifies code as signals are usually sampled on the
+ * opposite edge of the driving edge. Transmitters and receivers may however
+ * need to take other signal timings into account to convert between driving
+ * and sample edges.
+ */
+enum drm_bus_flags {
+ /**
+ * @DRM_BUS_FLAG_DE_LOW:
+ *
+ * The Data Enable signal is active low
+ */
+ DRM_BUS_FLAG_DE_LOW = BIT(0),
+
+ /**
+ * @DRM_BUS_FLAG_DE_HIGH:
+ *
+ * The Data Enable signal is active high
+ */
+ DRM_BUS_FLAG_DE_HIGH = BIT(1),
+
+ /**
+ * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE:
+ *
+ * Data is driven on the rising edge of the pixel clock
+ */
+ DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = BIT(2),
+
+ /**
+ * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE:
+ *
+ * Data is driven on the falling edge of the pixel clock
+ */
+ DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = BIT(3),
+
+ /**
+ * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE:
+ *
+ * Data is sampled on the rising edge of the pixel clock
+ */
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+
+ /**
+ * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE:
+ *
+ * Data is sampled on the falling edge of the pixel clock
+ */
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
+
+ /**
+ * @DRM_BUS_FLAG_DATA_MSB_TO_LSB:
+ *
+ * Data is transmitted MSB to LSB on the bus
+ */
+ DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4),
+
+ /**
+ * @DRM_BUS_FLAG_DATA_LSB_TO_MSB:
+ *
+ * Data is transmitted LSB to MSB on the bus
+ */
+ DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5),
+
+ /**
+ * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE:
+ *
+ * Sync signals are driven on the rising edge of the pixel clock
+ */
+ DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = BIT(6),
+
+ /**
+ * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE:
+ *
+ * Sync signals are driven on the falling edge of the pixel clock
+ */
+ DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = BIT(7),
+
+ /**
+ * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE:
+ *
+ * Sync signals are sampled on the rising edge of the pixel clock
+ */
+ DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
+
+ /**
+ * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE:
+ *
+ * Sync signals are sampled on the falling edge of the pixel clock
+ */
+ DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
+
+ /**
+ * @DRM_BUS_FLAG_SHARP_SIGNALS:
+ *
+ * Set if the Sharp-specific signals (SPL, CLS, PS, REV) must be used
+ */
+ DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8),
+};
+
+/**
+ * struct drm_display_info - runtime data about the connected sink
+ *
+ * Describes a given display (e.g. CRT or flat panel) and its limitations. For
+ * fixed display sinks like built-in panels there's not much difference between
+ * this and &struct drm_connector. But for sinks with a real cable this
+ * structure is meant to describe all the things at the other end of the cable.
+ *
+ * For sinks which provide an EDID this can be filled out by calling
+ * drm_add_edid_modes().
+ */
+struct drm_display_info {
+ /**
+ * @width_mm: Physical width in mm.
+ */
+ unsigned int width_mm;
+
+ /**
+ * @height_mm: Physical height in mm.
+ */
+ unsigned int height_mm;
+
+ /**
+ * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs.
+ */
+ unsigned int bpc;
+
+ /**
+ * @subpixel_order: Subpixel order of LCD panels.
+ */
+ enum subpixel_order subpixel_order;
+
+#define DRM_COLOR_FORMAT_RGB444 (1<<0)
+#define DRM_COLOR_FORMAT_YCBCR444 (1<<1)
+#define DRM_COLOR_FORMAT_YCBCR422 (1<<2)
+#define DRM_COLOR_FORMAT_YCBCR420 (1<<3)
+
+ /**
+ * @panel_orientation: Read only connector property for built-in panels,
+ * indicating the orientation of the panel vs the device's casing.
+ * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+ * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
+ * fb to compensate and gets exported as prop to userspace.
+ */
+ int panel_orientation;
+
+ /**
+ * @color_formats: HDMI Color formats, selects between RGB and YCrCb
+ * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
+ * as used to describe the pixel format in framebuffers, and also don't
+ * match the formats in @bus_formats which are shared with v4l.
+ */
+ u32 color_formats;
+
+ /**
+ * @bus_formats: Pixel data format on the wire, somewhat redundant with
+ * @color_formats. Array of size @num_bus_formats encoded using
+ * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers.
+ */
+ const u32 *bus_formats;
+ /**
+ * @num_bus_formats: Size of @bus_formats array.
+ */
+ unsigned int num_bus_formats;
+
+ /**
+ * @bus_flags: Additional information (like pixel signal polarity) for
+ * the pixel data on the bus, using &enum drm_bus_flags values
+ * DRM_BUS_FLAGS\_.
+ */
+ u32 bus_flags;
+
+ /**
+ * @max_tmds_clock: Maximum TMDS clock rate supported by the
+ * sink in kHz. 0 means undefined.
+ */
+ int max_tmds_clock;
+
+ /**
+ * @dvi_dual: Dual-link DVI sink?
+ */
+ bool dvi_dual;
+
+ /**
+ * @is_hdmi: True if the sink is an HDMI device.
+ *
+ * This field shall be used instead of calling
+ * drm_detect_hdmi_monitor() when possible.
+ */
+ bool is_hdmi;
+
+ /**
+ * @has_audio: True if the sink supports audio.
+ *
+ * This field shall be used instead of calling
+ * drm_detect_monitor_audio() when possible.
+ */
+ bool has_audio;
+
+ /**
+ * @has_hdmi_infoframe: Does the sink support the HDMI infoframe?
+ */
+ bool has_hdmi_infoframe;
+
+ /**
+ * @rgb_quant_range_selectable: Does the sink support selecting
+ * the RGB quantization range?
+ */
+ bool rgb_quant_range_selectable;
+
+ /**
+ * @edid_hdmi_rgb444_dc_modes: Mask of supported hdmi deep color modes
+ * in RGB 4:4:4. Even more stuff redundant with @bus_formats.
+ */
+ u8 edid_hdmi_rgb444_dc_modes;
+
+ /**
+ * @edid_hdmi_ycbcr444_dc_modes: Mask of supported hdmi deep color
+ * modes in YCbCr 4:4:4. Even more stuff redundant with @bus_formats.
+ */
+ u8 edid_hdmi_ycbcr444_dc_modes;
+
+ /**
+ * @cea_rev: CEA revision of the HDMI sink.
+ */
+ u8 cea_rev;
+
+ /**
+ * @hdmi: advance features of a HDMI sink.
+ */
+ struct drm_hdmi_info hdmi;
+
+ /**
+ * @non_desktop: Non desktop display (HMD).
+ */
+ bool non_desktop;
+
+ /**
+ * @monitor_range: Frequency range supported by monitor range descriptor
+ */
+ struct drm_monitor_range_info monitor_range;
+
+ /**
+ * @luminance_range: Luminance range supported by panel
+ */
+ struct drm_luminance_range_info luminance_range;
+
+ /**
+ * @mso_stream_count: eDP Multi-SST Operation (MSO) stream count from
+ * the DisplayID VESA vendor block. 0 for conventional Single-Stream
+ * Transport (SST), or 2 or 4 MSO streams.
+ */
+ u8 mso_stream_count;
+
+ /**
+ * @mso_pixel_overlap: eDP MSO segment pixel overlap, 0-8 pixels.
+ */
+ u8 mso_pixel_overlap;
+
+ /**
+ * @max_dsc_bpp: Maximum DSC target bitrate, if it is set to 0 the
+ * monitor's default value is used instead.
+ */
+ u32 max_dsc_bpp;
+
+ /**
+ * @vics: Array of vics_len VICs. Internal to EDID parsing.
+ */
+ u8 *vics;
+
+ /**
+ * @vics_len: Number of elements in vics. Internal to EDID parsing.
+ */
+ int vics_len;
+
+ /**
+ * @quirks: EDID based quirks. Internal to EDID parsing.
+ */
+ u32 quirks;
+};
+
+int drm_display_info_set_bus_formats(struct drm_display_info *info,
+ const u32 *formats,
+ unsigned int num_formats);
+
+/**
+ * struct drm_connector_tv_margins - TV connector related margins
+ *
+ * Describes the margins in pixels to put around the image on TV
+ * connectors to deal with overscan.
+ */
+struct drm_connector_tv_margins {
+ /**
+ * @bottom: Bottom margin in pixels.
+ */
+ unsigned int bottom;
+
+ /**
+ * @left: Left margin in pixels.
+ */
+ unsigned int left;
+
+ /**
+ * @right: Right margin in pixels.
+ */
+ unsigned int right;
+
+ /**
+ * @top: Top margin in pixels.
+ */
+ unsigned int top;
+};
+
+/**
+ * struct drm_tv_connector_state - TV connector related states
+ * @select_subconnector: selected subconnector
+ * @subconnector: detected subconnector
+ * @margins: TV margins
+ * @legacy_mode: Legacy TV mode, driver specific value
+ * @mode: TV mode
+ * @brightness: brightness in percent
+ * @contrast: contrast in percent
+ * @flicker_reduction: flicker reduction in percent
+ * @overscan: overscan in percent
+ * @saturation: saturation in percent
+ * @hue: hue in percent
+ */
+struct drm_tv_connector_state {
+ enum drm_mode_subconnector select_subconnector;
+ enum drm_mode_subconnector subconnector;
+ struct drm_connector_tv_margins margins;
+ unsigned int legacy_mode;
+ unsigned int mode;
+ unsigned int brightness;
+ unsigned int contrast;
+ unsigned int flicker_reduction;
+ unsigned int overscan;
+ unsigned int saturation;
+ unsigned int hue;
+};
+
+/**
+ * struct drm_connector_state - mutable connector state
+ */
+struct drm_connector_state {
+ /** @connector: backpointer to the connector */
+ struct drm_connector *connector;
+
+ /**
+ * @crtc: CRTC to connect connector to, NULL if disabled.
+ *
+ * Do not change this directly, use drm_atomic_set_crtc_for_connector()
+ * instead.
+ */
+ struct drm_crtc *crtc;
+
+ /**
+ * @best_encoder:
+ *
+ * Used by the atomic helpers to select the encoder, through the
+ * &drm_connector_helper_funcs.atomic_best_encoder or
+ * &drm_connector_helper_funcs.best_encoder callbacks.
+ *
+ * This is also used in the atomic helpers to map encoders to their
+ * current and previous connectors, see
+ * drm_atomic_get_old_connector_for_encoder() and
+ * drm_atomic_get_new_connector_for_encoder().
+ *
+ * NOTE: Atomic drivers must fill this out (either themselves or through
+ * helpers), for otherwise the GETCONNECTOR and GETENCODER IOCTLs will
+ * not return correct data to userspace.
+ */
+ struct drm_encoder *best_encoder;
+
+ /**
+ * @link_status: Connector link_status to keep track of whether link is
+ * GOOD or BAD to notify userspace if retraining is necessary.
+ */
+ enum drm_link_status link_status;
+
+ /** @state: backpointer to global drm_atomic_state */
+ struct drm_atomic_state *state;
+
+ /**
+ * @commit: Tracks the pending commit to prevent use-after-free conditions.
+ *
+ * Is only set when @crtc is NULL.
+ */
+ struct drm_crtc_commit *commit;
+
+ /** @tv: TV connector state */
+ struct drm_tv_connector_state tv;
+
+ /**
+ * @self_refresh_aware:
+ *
+ * This tracks whether a connector is aware of the self refresh state.
+ * It should be set to true for those connector implementations which
+ * understand the self refresh state. This is needed since the crtc
+ * registers the self refresh helpers and it doesn't know if the
+ * connectors downstream have implemented self refresh entry/exit.
+ *
+ * Drivers should set this to true in atomic_check if they know how to
+ * handle self_refresh requests.
+ */
+ bool self_refresh_aware;
+
+ /**
+ * @picture_aspect_ratio: Connector property to control the
+ * HDMI infoframe aspect ratio setting.
+ *
+ * The %DRM_MODE_PICTURE_ASPECT_\* values much match the
+ * values for &enum hdmi_picture_aspect
+ */
+ enum hdmi_picture_aspect picture_aspect_ratio;
+
+ /**
+ * @content_type: Connector property to control the
+ * HDMI infoframe content type setting.
+ * The %DRM_MODE_CONTENT_TYPE_\* values much
+ * match the values.
+ */
+ unsigned int content_type;
+
+ /**
+ * @hdcp_content_type: Connector property to pass the type of
+ * protected content. This is most commonly used for HDCP.
+ */
+ unsigned int hdcp_content_type;
+
+ /**
+ * @scaling_mode: Connector property to control the
+ * upscaling, mostly used for built-in panels.
+ */
+ unsigned int scaling_mode;
+
+ /**
+ * @content_protection: Connector property to request content
+ * protection. This is most commonly used for HDCP.
+ */
+ unsigned int content_protection;
+
+ /**
+ * @colorspace: State variable for Connector property to request
+ * colorspace change on Sink. This is most commonly used to switch
+ * to wider color gamuts like BT2020.
+ */
+ enum drm_colorspace colorspace;
+
+ /**
+ * @writeback_job: Writeback job for writeback connectors
+ *
+ * Holds the framebuffer and out-fence for a writeback connector. As
+ * the writeback completion may be asynchronous to the normal commit
+ * cycle, the writeback job lifetime is managed separately from the
+ * normal atomic state by this object.
+ *
+ * See also: drm_writeback_queue_job() and
+ * drm_writeback_signal_completion()
+ */
+ struct drm_writeback_job *writeback_job;
+
+ /**
+ * @max_requested_bpc: Connector property to limit the maximum bit
+ * depth of the pixels.
+ */
+ u8 max_requested_bpc;
+
+ /**
+ * @max_bpc: Connector max_bpc based on the requested max_bpc property
+ * and the connector bpc limitations obtained from edid.
+ */
+ u8 max_bpc;
+
+ /**
+ * @privacy_screen_sw_state: See :ref:`Standard Connector
+ * Properties<standard_connector_properties>`
+ */
+ enum drm_privacy_screen_status privacy_screen_sw_state;
+
+ /**
+ * @hdr_output_metadata:
+ * DRM blob property for HDR output metadata
+ */
+ struct drm_property_blob *hdr_output_metadata;
+};
+
+/**
+ * struct drm_connector_funcs - control connectors on a given device
+ *
+ * Each CRTC may have one or more connectors attached to it. The functions
+ * below allow the core DRM code to control connectors, enumerate available modes,
+ * etc.
+ */
+struct drm_connector_funcs {
+ /**
+ * @dpms:
+ *
+ * Legacy entry point to set the per-connector DPMS state. Legacy DPMS
+ * is exposed as a standard property on the connector, but diverted to
+ * this callback in the drm core. Note that atomic drivers don't
+ * implement the 4 level DPMS support on the connector any more, but
+ * instead only have an on/off "ACTIVE" property on the CRTC object.
+ *
+ * This hook is not used by atomic drivers, remapping of the legacy DPMS
+ * property is entirely handled in the DRM core.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*dpms)(struct drm_connector *connector, int mode);
+
+ /**
+ * @reset:
+ *
+ * Reset connector hardware and software state to off. This function isn't
+ * called by the core directly, only through drm_mode_config_reset().
+ * It's not a helper hook only for historical reasons.
+ *
+ * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
+ * atomic state using this hook.
+ */
+ void (*reset)(struct drm_connector *connector);
+
+ /**
+ * @detect:
+ *
+ * Check to see if anything is attached to the connector. The parameter
+ * force is set to false whilst polling, true when checking the
+ * connector due to a user request. force can be used by the driver to
+ * avoid expensive, destructive operations during automated probing.
+ *
+ * This callback is optional, if not implemented the connector will be
+ * considered as always being attached.
+ *
+ * FIXME:
+ *
+ * Note that this hook is only called by the probe helper. It's not in
+ * the helper library vtable purely for historical reasons. The only DRM
+ * core entry point to probe connector state is @fill_modes.
+ *
+ * Note that the helper library will already hold
+ * &drm_mode_config.connection_mutex. Drivers which need to grab additional
+ * locks to avoid races with concurrent modeset changes need to use
+ * &drm_connector_helper_funcs.detect_ctx instead.
+ *
+ * Also note that this callback can be called no matter the
+ * state the connector is in. Drivers that need the underlying
+ * device to be powered to perform the detection will first need
+ * to make sure it's been properly enabled.
+ *
+ * RETURNS:
+ *
+ * drm_connector_status indicating the connector's status.
+ */
+ enum drm_connector_status (*detect)(struct drm_connector *connector,
+ bool force);
+
+ /**
+ * @force:
+ *
+ * This function is called to update internal encoder state when the
+ * connector is forced to a certain state by userspace, either through
+ * the sysfs interfaces or on the kernel cmdline. In that case the
+ * @detect callback isn't called.
+ *
+ * FIXME:
+ *
+ * Note that this hook is only called by the probe helper. It's not in
+ * the helper library vtable purely for historical reasons. The only DRM
+ * core entry point to probe connector state is @fill_modes.
+ */
+ void (*force)(struct drm_connector *connector);
+
+ /**
+ * @fill_modes:
+ *
+ * Entry point for output detection and basic mode validation. The
+ * driver should reprobe the output if needed (e.g. when hotplug
+ * handling is unreliable), add all detected modes to &drm_connector.modes
+ * and filter out any the device can't support in any configuration. It
+ * also needs to filter out any modes wider or higher than the
+ * parameters max_width and max_height indicate.
+ *
+ * The drivers must also prune any modes no longer valid from
+ * &drm_connector.modes. Furthermore it must update
+ * &drm_connector.status and &drm_connector.edid. If no EDID has been
+ * received for this output connector->edid must be NULL.
+ *
+ * Drivers using the probe helpers should use
+ * drm_helper_probe_single_connector_modes() to implement this
+ * function.
+ *
+ * RETURNS:
+ *
+ * The number of modes detected and filled into &drm_connector.modes.
+ */
+ int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
+
+ /**
+ * @set_property:
+ *
+ * This is the legacy entry point to update a property attached to the
+ * connector.
+ *
+ * This callback is optional if the driver does not support any legacy
+ * driver-private properties. For atomic drivers it is not used because
+ * property handling is done entirely in the DRM core.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*set_property)(struct drm_connector *connector, struct drm_property *property,
+ uint64_t val);
+
+ /**
+ * @late_register:
+ *
+ * This optional hook can be used to register additional userspace
+ * interfaces attached to the connector, light backlight control, i2c,
+ * DP aux or similar interfaces. It is called late in the driver load
+ * sequence from drm_connector_register() when registering all the
+ * core drm connector interfaces. Everything added from this callback
+ * should be unregistered in the early_unregister callback.
+ *
+ * This is called while holding &drm_connector.mutex.
+ *
+ * Returns:
+ *
+ * 0 on success, or a negative error code on failure.
+ */
+ int (*late_register)(struct drm_connector *connector);
+
+ /**
+ * @early_unregister:
+ *
+ * This optional hook should be used to unregister the additional
+ * userspace interfaces attached to the connector from
+ * late_register(). It is called from drm_connector_unregister(),
+ * early in the driver unload sequence to disable userspace access
+ * before data structures are torndown.
+ *
+ * This is called while holding &drm_connector.mutex.
+ */
+ void (*early_unregister)(struct drm_connector *connector);
+
+ /**
+ * @destroy:
+ *
+ * Clean up connector resources. This is called at driver unload time
+ * through drm_mode_config_cleanup(). It can also be called at runtime
+ * when a connector is being hot-unplugged for drivers that support
+ * connector hotplugging (e.g. DisplayPort MST).
+ */
+ void (*destroy)(struct drm_connector *connector);
+
+ /**
+ * @atomic_duplicate_state:
+ *
+ * Duplicate the current atomic state for this connector and return it.
+ * The core and helpers guarantee that any atomic state duplicated with
+ * this hook and still owned by the caller (i.e. not transferred to the
+ * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+ * cleaned up by calling the @atomic_destroy_state hook in this
+ * structure.
+ *
+ * This callback is mandatory for atomic drivers.
+ *
+ * Atomic drivers which don't subclass &struct drm_connector_state should use
+ * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
+ * state structure to extend it with driver-private state should use
+ * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
+ * duplicated in a consistent fashion across drivers.
+ *
+ * It is an error to call this hook before &drm_connector.state has been
+ * initialized correctly.
+ *
+ * NOTE:
+ *
+ * If the duplicate state references refcounted resources this hook must
+ * acquire a reference for each of them. The driver must release these
+ * references again in @atomic_destroy_state.
+ *
+ * RETURNS:
+ *
+ * Duplicated atomic state or NULL when the allocation failed.
+ */
+ struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
+
+ /**
+ * @atomic_destroy_state:
+ *
+ * Destroy a state duplicated with @atomic_duplicate_state and release
+ * or unreference all resources it references
+ *
+ * This callback is mandatory for atomic drivers.
+ */
+ void (*atomic_destroy_state)(struct drm_connector *connector,
+ struct drm_connector_state *state);
+
+ /**
+ * @atomic_set_property:
+ *
+ * Decode a driver-private property value and store the decoded value
+ * into the passed-in state structure. Since the atomic core decodes all
+ * standardized properties (even for extensions beyond the core set of
+ * properties which might not be implemented by all drivers) this
+ * requires drivers to subclass the state structure.
+ *
+ * Such driver-private properties should really only be implemented for
+ * truly hardware/vendor specific state. Instead it is preferred to
+ * standardize atomic extension and decode the properties used to expose
+ * such an extension in the core.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_connector_set_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * NOTE:
+ *
+ * This function is called in the state assembly phase of atomic
+ * modesets, which can be aborted for any reason (including on
+ * userspace's request to just check whether a configuration would be
+ * possible). Drivers MUST NOT touch any persistent state (hardware or
+ * software) or data structures except the passed in @state parameter.
+ *
+ * Also since userspace controls in which order properties are set this
+ * function must not do any input validation (since the state update is
+ * incomplete and hence likely inconsistent). Instead any such input
+ * validation must be done in the various atomic_check callbacks.
+ *
+ * RETURNS:
+ *
+ * 0 if the property has been found, -EINVAL if the property isn't
+ * implemented by the driver (which shouldn't ever happen, the core only
+ * asks for properties attached to this connector). No other validation
+ * is allowed by the driver. The core already checks that the property
+ * value is within the range (integer, valid enum value, ...) the driver
+ * set when registering the property.
+ */
+ int (*atomic_set_property)(struct drm_connector *connector,
+ struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t val);
+
+ /**
+ * @atomic_get_property:
+ *
+ * Reads out the decoded driver-private property. This is used to
+ * implement the GETCONNECTOR IOCTL.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_connector_get_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success, -EINVAL if the property isn't implemented by the
+ * driver (which shouldn't ever happen, the core only asks for
+ * properties attached to this connector).
+ */
+ int (*atomic_get_property)(struct drm_connector *connector,
+ const struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t *val);
+
+ /**
+ * @atomic_print_state:
+ *
+ * If driver subclasses &struct drm_connector_state, it should implement
+ * this optional hook for printing additional driver specific state.
+ *
+ * Do not call this directly, use drm_atomic_connector_print_state()
+ * instead.
+ */
+ void (*atomic_print_state)(struct drm_printer *p,
+ const struct drm_connector_state *state);
+
+ /**
+ * @oob_hotplug_event:
+ *
+ * This will get called when a hotplug-event for a drm-connector
+ * has been received from a source outside the display driver / device.
+ */
+ void (*oob_hotplug_event)(struct drm_connector *connector);
+
+ /**
+ * @debugfs_init:
+ *
+ * Allows connectors to create connector-specific debugfs files.
+ */
+ void (*debugfs_init)(struct drm_connector *connector, struct dentry *root);
+};
+
+/**
+ * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line
+ *
+ * Each connector can have an initial mode with additional options
+ * passed through the kernel command line. This structure allows to
+ * express those parameters and will be filled by the command-line
+ * parser.
+ */
+struct drm_cmdline_mode {
+ /**
+ * @name:
+ *
+ * Name of the mode.
+ */
+ char name[DRM_DISPLAY_MODE_LEN];
+
+ /**
+ * @specified:
+ *
+ * Has a mode been read from the command-line?
+ */
+ bool specified;
+
+ /**
+ * @refresh_specified:
+ *
+ * Did the mode have a preferred refresh rate?
+ */
+ bool refresh_specified;
+
+ /**
+ * @bpp_specified:
+ *
+ * Did the mode have a preferred BPP?
+ */
+ bool bpp_specified;
+
+ /**
+ * @pixel_clock:
+ *
+ * Pixel Clock in kHz. Optional.
+ */
+ unsigned int pixel_clock;
+
+ /**
+ * @xres:
+ *
+ * Active resolution on the X axis, in pixels.
+ */
+ int xres;
+
+ /**
+ * @yres:
+ *
+ * Active resolution on the Y axis, in pixels.
+ */
+ int yres;
+
+ /**
+ * @bpp:
+ *
+ * Bits per pixels for the mode.
+ */
+ int bpp;
+
+ /**
+ * @refresh:
+ *
+ * Refresh rate, in Hertz.
+ */
+ int refresh;
+
+ /**
+ * @rb:
+ *
+ * Do we need to use reduced blanking?
+ */
+ bool rb;
+
+ /**
+ * @interlace:
+ *
+ * The mode is interlaced.
+ */
+ bool interlace;
+
+ /**
+ * @cvt:
+ *
+ * The timings will be calculated using the VESA Coordinated
+ * Video Timings instead of looking up the mode from a table.
+ */
+ bool cvt;
+
+ /**
+ * @margins:
+ *
+ * Add margins to the mode calculation (1.8% of xres rounded
+ * down to 8 pixels and 1.8% of yres).
+ */
+ bool margins;
+
+ /**
+ * @force:
+ *
+ * Ignore the hotplug state of the connector, and force its
+ * state to one of the DRM_FORCE_* values.
+ */
+ enum drm_connector_force force;
+
+ /**
+ * @rotation_reflection:
+ *
+ * Initial rotation and reflection of the mode setup from the
+ * command line. See DRM_MODE_ROTATE_* and
+ * DRM_MODE_REFLECT_*. The only rotations supported are
+ * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180.
+ */
+ unsigned int rotation_reflection;
+
+ /**
+ * @panel_orientation:
+ *
+ * drm-connector "panel orientation" property override value,
+ * DRM_MODE_PANEL_ORIENTATION_UNKNOWN if not set.
+ */
+ enum drm_panel_orientation panel_orientation;
+
+ /**
+ * @tv_margins: TV margins to apply to the mode.
+ */
+ struct drm_connector_tv_margins tv_margins;
+
+ /**
+ * @tv_mode: TV mode standard. See DRM_MODE_TV_MODE_*.
+ */
+ enum drm_connector_tv_mode tv_mode;
+
+ /**
+ * @tv_mode_specified:
+ *
+ * Did the mode have a preferred TV mode?
+ */
+ bool tv_mode_specified;
+};
+
+/**
+ * struct drm_connector - central DRM connector control structure
+ *
+ * Each connector may be connected to one or more CRTCs, or may be clonable by
+ * another connector if they can share a CRTC. Each connector also has a specific
+ * position in the broader display (referred to as a 'screen' though it could
+ * span multiple monitors).
+ */
+struct drm_connector {
+ /** @dev: parent DRM device */
+ struct drm_device *dev;
+ /** @kdev: kernel device for sysfs attributes */
+ struct device *kdev;
+ /** @attr: sysfs attributes */
+ struct device_attribute *attr;
+ /**
+ * @fwnode: associated fwnode supplied by platform firmware
+ *
+ * Drivers can set this to associate a fwnode with a connector, drivers
+ * are expected to get a reference on the fwnode when setting this.
+ * drm_connector_cleanup() will call fwnode_handle_put() on this.
+ */
+ struct fwnode_handle *fwnode;
+
+ /**
+ * @head:
+ *
+ * List of all connectors on a @dev, linked from
+ * &drm_mode_config.connector_list. Protected by
+ * &drm_mode_config.connector_list_lock, but please only use
+ * &drm_connector_list_iter to walk this list.
+ */
+ struct list_head head;
+
+ /**
+ * @global_connector_list_entry:
+ *
+ * Connector entry in the global connector-list, used by
+ * drm_connector_find_by_fwnode().
+ */
+ struct list_head global_connector_list_entry;
+
+ /** @base: base KMS object */
+ struct drm_mode_object base;
+
+ /** @name: human readable name, can be overwritten by the driver */
+ char *name;
+
+ /**
+ * @mutex: Lock for general connector state, but currently only protects
+ * @registered. Most of the connector state is still protected by
+ * &drm_mode_config.mutex.
+ */
+ struct mutex mutex;
+
+ /**
+ * @index: Compacted connector index, which matches the position inside
+ * the mode_config.list for drivers not supporting hot-add/removing. Can
+ * be used as an array index. It is invariant over the lifetime of the
+ * connector.
+ */
+ unsigned index;
+
+ /**
+ * @connector_type:
+ * one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
+ */
+ int connector_type;
+ /** @connector_type_id: index into connector type enum */
+ int connector_type_id;
+ /**
+ * @interlace_allowed:
+ * Can this connector handle interlaced modes? Only used by
+ * drm_helper_probe_single_connector_modes() for mode filtering.
+ */
+ bool interlace_allowed;
+ /**
+ * @doublescan_allowed:
+ * Can this connector handle doublescan? Only used by
+ * drm_helper_probe_single_connector_modes() for mode filtering.
+ */
+ bool doublescan_allowed;
+ /**
+ * @stereo_allowed:
+ * Can this connector handle stereo modes? Only used by
+ * drm_helper_probe_single_connector_modes() for mode filtering.
+ */
+ bool stereo_allowed;
+
+ /**
+ * @ycbcr_420_allowed : This bool indicates if this connector is
+ * capable of handling YCBCR 420 output. While parsing the EDID
+ * blocks it's very helpful to know if the source is capable of
+ * handling YCBCR 420 outputs.
+ */
+ bool ycbcr_420_allowed;
+
+ /**
+ * @registration_state: Is this connector initializing, exposed
+ * (registered) with userspace, or unregistered?
+ *
+ * Protected by @mutex.
+ */
+ enum drm_connector_registration_state registration_state;
+
+ /**
+ * @modes:
+ * Modes available on this connector (from fill_modes() + user).
+ * Protected by &drm_mode_config.mutex.
+ */
+ struct list_head modes;
+
+ /**
+ * @status:
+ * One of the drm_connector_status enums (connected, not, or unknown).
+ * Protected by &drm_mode_config.mutex.
+ */
+ enum drm_connector_status status;
+
+ /**
+ * @probed_modes:
+ * These are modes added by probing with DDC or the BIOS, before
+ * filtering is applied. Used by the probe helpers. Protected by
+ * &drm_mode_config.mutex.
+ */
+ struct list_head probed_modes;
+
+ /**
+ * @display_info: Display information is filled from EDID information
+ * when a display is detected. For non hot-pluggable displays such as
+ * flat panels in embedded systems, the driver should initialize the
+ * &drm_display_info.width_mm and &drm_display_info.height_mm fields
+ * with the physical size of the display.
+ *
+ * Protected by &drm_mode_config.mutex.
+ */
+ struct drm_display_info display_info;
+
+ /** @funcs: connector control functions */
+ const struct drm_connector_funcs *funcs;
+
+ /**
+ * @edid_blob_ptr: DRM property containing EDID if present. Protected by
+ * &drm_mode_config.mutex. This should be updated only by calling
+ * drm_connector_update_edid_property().
+ */
+ struct drm_property_blob *edid_blob_ptr;
+
+ /** @properties: property tracking for this connector */
+ struct drm_object_properties properties;
+
+ /**
+ * @scaling_mode_property: Optional atomic property to control the
+ * upscaling. See drm_connector_attach_content_protection_property().
+ */
+ struct drm_property *scaling_mode_property;
+
+ /**
+ * @vrr_capable_property: Optional property to help userspace
+ * query hardware support for variable refresh rate on a connector.
+ * connector. Drivers can add the property to a connector by
+ * calling drm_connector_attach_vrr_capable_property().
+ *
+ * This should be updated only by calling
+ * drm_connector_set_vrr_capable_property().
+ */
+ struct drm_property *vrr_capable_property;
+
+ /**
+ * @colorspace_property: Connector property to set the suitable
+ * colorspace supported by the sink.
+ */
+ struct drm_property *colorspace_property;
+
+ /**
+ * @path_blob_ptr:
+ *
+ * DRM blob property data for the DP MST path property. This should only
+ * be updated by calling drm_connector_set_path_property().
+ */
+ struct drm_property_blob *path_blob_ptr;
+
+ /**
+ * @max_bpc_property: Default connector property for the max bpc to be
+ * driven out of the connector.
+ */
+ struct drm_property *max_bpc_property;
+
+ /** @privacy_screen: drm_privacy_screen for this connector, or NULL. */
+ struct drm_privacy_screen *privacy_screen;
+
+ /** @privacy_screen_notifier: privacy-screen notifier_block */
+ struct notifier_block privacy_screen_notifier;
+
+ /**
+ * @privacy_screen_sw_state_property: Optional atomic property for the
+ * connector to control the integrated privacy screen.
+ */
+ struct drm_property *privacy_screen_sw_state_property;
+
+ /**
+ * @privacy_screen_hw_state_property: Optional atomic property for the
+ * connector to report the actual integrated privacy screen state.
+ */
+ struct drm_property *privacy_screen_hw_state_property;
+
+#define DRM_CONNECTOR_POLL_HPD (1 << 0)
+#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
+#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
+
+ /**
+ * @polled:
+ *
+ * Connector polling mode, a combination of
+ *
+ * DRM_CONNECTOR_POLL_HPD
+ * The connector generates hotplug events and doesn't need to be
+ * periodically polled. The CONNECT and DISCONNECT flags must not
+ * be set together with the HPD flag.
+ *
+ * DRM_CONNECTOR_POLL_CONNECT
+ * Periodically poll the connector for connection.
+ *
+ * DRM_CONNECTOR_POLL_DISCONNECT
+ * Periodically poll the connector for disconnection, without
+ * causing flickering even when the connector is in use. DACs should
+ * rarely do this without a lot of testing.
+ *
+ * Set to 0 for connectors that don't support connection status
+ * discovery.
+ */
+ uint8_t polled;
+
+ /**
+ * @dpms: Current dpms state. For legacy drivers the
+ * &drm_connector_funcs.dpms callback must update this. For atomic
+ * drivers, this is handled by the core atomic code, and drivers must
+ * only take &drm_crtc_state.active into account.
+ */
+ int dpms;
+
+ /** @helper_private: mid-layer private data */
+ const struct drm_connector_helper_funcs *helper_private;
+
+ /** @cmdline_mode: mode line parsed from the kernel cmdline for this connector */
+ struct drm_cmdline_mode cmdline_mode;
+ /** @force: a DRM_FORCE_<foo> state for forced mode sets */
+ enum drm_connector_force force;
+
+ /**
+ * @edid_override: Override EDID set via debugfs.
+ *
+ * Do not modify or access outside of the drm_edid_override_* family of
+ * functions.
+ */
+ const struct drm_edid *edid_override;
+
+ /**
+ * @edid_override_mutex: Protect access to edid_override.
+ */
+ struct mutex edid_override_mutex;
+
+ /** @epoch_counter: used to detect any other changes in connector, besides status */
+ u64 epoch_counter;
+
+ /**
+ * @possible_encoders: Bit mask of encoders that can drive this
+ * connector, drm_encoder_index() determines the index into the bitfield
+ * and the bits are set with drm_connector_attach_encoder().
+ */
+ u32 possible_encoders;
+
+ /**
+ * @encoder: Currently bound encoder driving this connector, if any.
+ * Only really meaningful for non-atomic drivers. Atomic drivers should
+ * instead look at &drm_connector_state.best_encoder, and in case they
+ * need the CRTC driving this output, &drm_connector_state.crtc.
+ */
+ struct drm_encoder *encoder;
+
+#define MAX_ELD_BYTES 128
+ /** @eld: EDID-like data, if present */
+ uint8_t eld[MAX_ELD_BYTES];
+ /** @latency_present: AV delay info from ELD, if found */
+ bool latency_present[2];
+ /**
+ * @video_latency: Video latency info from ELD, if found.
+ * [0]: progressive, [1]: interlaced
+ */
+ int video_latency[2];
+ /**
+ * @audio_latency: audio latency info from ELD, if found
+ * [0]: progressive, [1]: interlaced
+ */
+ int audio_latency[2];
+
+ /**
+ * @ddc: associated ddc adapter.
+ * A connector usually has its associated ddc adapter. If a driver uses
+ * this field, then an appropriate symbolic link is created in connector
+ * sysfs directory to make it easy for the user to tell which i2c
+ * adapter is for a particular display.
+ *
+ * The field should be set by calling drm_connector_init_with_ddc().
+ */
+ struct i2c_adapter *ddc;
+
+ /**
+ * @null_edid_counter: track sinks that give us all zeros for the EDID.
+ * Needed to workaround some HW bugs where we get all 0s
+ */
+ int null_edid_counter;
+
+ /** @bad_edid_counter: track sinks that give us an EDID with invalid checksum */
+ unsigned bad_edid_counter;
+
+ /**
+ * @edid_corrupt: Indicates whether the last read EDID was corrupt. Used
+ * in Displayport compliance testing - Displayport Link CTS Core 1.2
+ * rev1.1 4.2.2.6
+ */
+ bool edid_corrupt;
+ /**
+ * @real_edid_checksum: real edid checksum for corrupted edid block.
+ * Required in Displayport 1.4 compliance testing
+ * rev1.1 4.2.2.6
+ */
+ u8 real_edid_checksum;
+
+ /** @debugfs_entry: debugfs directory for this connector */
+ struct dentry *debugfs_entry;
+
+ /**
+ * @state:
+ *
+ * Current atomic state for this connector.
+ *
+ * This is protected by &drm_mode_config.connection_mutex. Note that
+ * nonblocking atomic commits access the current connector state without
+ * taking locks. Either by going through the &struct drm_atomic_state
+ * pointers, see for_each_oldnew_connector_in_state(),
+ * for_each_old_connector_in_state() and
+ * for_each_new_connector_in_state(). Or through careful ordering of
+ * atomic commit operations as implemented in the atomic helpers, see
+ * &struct drm_crtc_commit.
+ */
+ struct drm_connector_state *state;
+
+ /* DisplayID bits. FIXME: Extract into a substruct? */
+
+ /**
+ * @tile_blob_ptr:
+ *
+ * DRM blob property data for the tile property (used mostly by DP MST).
+ * This is meant for screens which are driven through separate display
+ * pipelines represented by &drm_crtc, which might not be running with
+ * genlocked clocks. For tiled panels which are genlocked, like
+ * dual-link LVDS or dual-link DSI, the driver should try to not expose
+ * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
+ *
+ * This should only be updated by calling
+ * drm_connector_set_tile_property().
+ */
+ struct drm_property_blob *tile_blob_ptr;
+
+ /** @has_tile: is this connector connected to a tiled monitor */
+ bool has_tile;
+ /** @tile_group: tile group for the connected monitor */
+ struct drm_tile_group *tile_group;
+ /** @tile_is_single_monitor: whether the tile is one monitor housing */
+ bool tile_is_single_monitor;
+
+ /** @num_h_tile: number of horizontal tiles in the tile group */
+ /** @num_v_tile: number of vertical tiles in the tile group */
+ uint8_t num_h_tile, num_v_tile;
+ /** @tile_h_loc: horizontal location of this tile */
+ /** @tile_v_loc: vertical location of this tile */
+ uint8_t tile_h_loc, tile_v_loc;
+ /** @tile_h_size: horizontal size of this tile. */
+ /** @tile_v_size: vertical size of this tile. */
+ uint16_t tile_h_size, tile_v_size;
+
+ /**
+ * @free_node:
+ *
+ * List used only by &drm_connector_list_iter to be able to clean up a
+ * connector from any context, in conjunction with
+ * &drm_mode_config.connector_free_work.
+ */
+ struct llist_node free_node;
+
+ /** @hdr_sink_metadata: HDR Metadata Information read from sink */
+ struct hdr_sink_metadata hdr_sink_metadata;
+};
+
+#define obj_to_connector(x) container_of(x, struct drm_connector, base)
+
+int drm_connector_init(struct drm_device *dev,
+ struct drm_connector *connector,
+ const struct drm_connector_funcs *funcs,
+ int connector_type);
+int drm_connector_init_with_ddc(struct drm_device *dev,
+ struct drm_connector *connector,
+ const struct drm_connector_funcs *funcs,
+ int connector_type,
+ struct i2c_adapter *ddc);
+int drmm_connector_init(struct drm_device *dev,
+ struct drm_connector *connector,
+ const struct drm_connector_funcs *funcs,
+ int connector_type,
+ struct i2c_adapter *ddc);
+void drm_connector_attach_edid_property(struct drm_connector *connector);
+int drm_connector_register(struct drm_connector *connector);
+void drm_connector_unregister(struct drm_connector *connector);
+int drm_connector_attach_encoder(struct drm_connector *connector,
+ struct drm_encoder *encoder);
+
+void drm_connector_cleanup(struct drm_connector *connector);
+
+static inline unsigned int drm_connector_index(const struct drm_connector *connector)
+{
+ return connector->index;
+}
+
+static inline u32 drm_connector_mask(const struct drm_connector *connector)
+{
+ return 1 << connector->index;
+}
+
+/**
+ * drm_connector_lookup - lookup connector object
+ * @dev: DRM device
+ * @file_priv: drm file to check for lease against.
+ * @id: connector object id
+ *
+ * This function looks up the connector object specified by id
+ * add takes a reference to it.
+ */
+static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
+ struct drm_file *file_priv,
+ uint32_t id)
+{
+ struct drm_mode_object *mo;
+ mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR);
+ return mo ? obj_to_connector(mo) : NULL;
+}
+
+/**
+ * drm_connector_get - acquire a connector reference
+ * @connector: DRM connector
+ *
+ * This function increments the connector's refcount.
+ */
+static inline void drm_connector_get(struct drm_connector *connector)
+{
+ drm_mode_object_get(&connector->base);
+}
+
+/**
+ * drm_connector_put - release a connector reference
+ * @connector: DRM connector
+ *
+ * This function decrements the connector's reference count and frees the
+ * object if the reference count drops to zero.
+ */
+static inline void drm_connector_put(struct drm_connector *connector)
+{
+ drm_mode_object_put(&connector->base);
+}
+
+/**
+ * drm_connector_is_unregistered - has the connector been unregistered from
+ * userspace?
+ * @connector: DRM connector
+ *
+ * Checks whether or not @connector has been unregistered from userspace.
+ *
+ * Returns:
+ * True if the connector was unregistered, false if the connector is
+ * registered or has not yet been registered with userspace.
+ */
+static inline bool
+drm_connector_is_unregistered(struct drm_connector *connector)
+{
+ return READ_ONCE(connector->registration_state) ==
+ DRM_CONNECTOR_UNREGISTERED;
+}
+
+void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode);
+const char *drm_get_connector_type_name(unsigned int connector_type);
+const char *drm_get_connector_status_name(enum drm_connector_status status);
+const char *drm_get_subpixel_order_name(enum subpixel_order order);
+const char *drm_get_dpms_name(int val);
+const char *drm_get_dvi_i_subconnector_name(int val);
+const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_mode_name(int val);
+const char *drm_get_tv_subconnector_name(int val);
+const char *drm_get_tv_select_name(int val);
+const char *drm_get_dp_subconnector_name(int val);
+const char *drm_get_content_protection_name(int val);
+const char *drm_get_hdcp_content_type_name(int val);
+
+int drm_get_tv_mode_from_name(const char *name, size_t len);
+
+int drm_mode_create_dvi_i_properties(struct drm_device *dev);
+void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
+
+int drm_mode_create_tv_margin_properties(struct drm_device *dev);
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+ unsigned int num_modes,
+ const char * const modes[]);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+ unsigned int supported_tv_modes);
+void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
+int drm_mode_create_scaling_mode_property(struct drm_device *dev);
+int drm_connector_attach_content_type_property(struct drm_connector *dev);
+int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
+ u32 scaling_mode_mask);
+int drm_connector_attach_vrr_capable_property(
+ struct drm_connector *connector);
+int drm_connector_attach_colorspace_property(struct drm_connector *connector);
+int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector);
+bool drm_connector_atomic_hdr_metadata_equal(struct drm_connector_state *old_state,
+ struct drm_connector_state *new_state);
+int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
+int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector,
+ u32 supported_colorspaces);
+int drm_mode_create_dp_colorspace_property(struct drm_connector *connector,
+ u32 supported_colorspaces);
+int drm_mode_create_content_type_property(struct drm_device *dev);
+int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
+
+int drm_connector_set_path_property(struct drm_connector *connector,
+ const char *path);
+int drm_connector_set_tile_property(struct drm_connector *connector);
+int drm_connector_update_edid_property(struct drm_connector *connector,
+ const struct edid *edid);
+void drm_connector_set_link_status_property(struct drm_connector *connector,
+ uint64_t link_status);
+void drm_connector_set_vrr_capable_property(
+ struct drm_connector *connector, bool capable);
+int drm_connector_set_panel_orientation(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation);
+int drm_connector_set_panel_orientation_with_quirk(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation,
+ int width, int height);
+int drm_connector_set_orientation_from_panel(
+ struct drm_connector *connector,
+ struct drm_panel *panel);
+int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
+ int min, int max);
+void drm_connector_create_privacy_screen_properties(struct drm_connector *conn);
+void drm_connector_attach_privacy_screen_properties(struct drm_connector *conn);
+void drm_connector_attach_privacy_screen_provider(
+ struct drm_connector *connector, struct drm_privacy_screen *priv);
+void drm_connector_update_privacy_screen(const struct drm_connector_state *connector_state);
+
+/**
+ * struct drm_tile_group - Tile group metadata
+ * @refcount: reference count
+ * @dev: DRM device
+ * @id: tile group id exposed to userspace
+ * @group_data: Sink-private data identifying this group
+ *
+ * @group_data corresponds to displayid vend/prod/serial for external screens
+ * with an EDID.
+ */
+struct drm_tile_group {
+ struct kref refcount;
+ struct drm_device *dev;
+ int id;
+ u8 group_data[8];
+};
+
+struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
+ const char topology[8]);
+struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
+ const char topology[8]);
+void drm_mode_put_tile_group(struct drm_device *dev,
+ struct drm_tile_group *tg);
+
+/**
+ * struct drm_connector_list_iter - connector_list iterator
+ *
+ * This iterator tracks state needed to be able to walk the connector_list
+ * within struct drm_mode_config. Only use together with
+ * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and
+ * drm_connector_list_iter_next() respectively the convenience macro
+ * drm_for_each_connector_iter().
+ *
+ * Note that the return value of drm_connector_list_iter_next() is only valid
+ * up to the next drm_connector_list_iter_next() or
+ * drm_connector_list_iter_end() call. If you want to use the connector later,
+ * then you need to grab your own reference first using drm_connector_get().
+ */
+struct drm_connector_list_iter {
+/* private: */
+ struct drm_device *dev;
+ struct drm_connector *conn;
+};
+
+void drm_connector_list_iter_begin(struct drm_device *dev,
+ struct drm_connector_list_iter *iter);
+struct drm_connector *
+drm_connector_list_iter_next(struct drm_connector_list_iter *iter);
+void drm_connector_list_iter_end(struct drm_connector_list_iter *iter);
+
+bool drm_connector_has_possible_encoder(struct drm_connector *connector,
+ struct drm_encoder *encoder);
+const char *drm_get_colorspace_name(enum drm_colorspace colorspace);
+
+/**
+ * drm_for_each_connector_iter - connector_list iterator macro
+ * @connector: &struct drm_connector pointer used as cursor
+ * @iter: &struct drm_connector_list_iter
+ *
+ * Note that @connector is only valid within the list body, if you want to use
+ * @connector after calling drm_connector_list_iter_end() then you need to grab
+ * your own reference first using drm_connector_get().
+ */
+#define drm_for_each_connector_iter(connector, iter) \
+ while ((connector = drm_connector_list_iter_next(iter)))
+
+/**
+ * drm_connector_for_each_possible_encoder - iterate connector's possible encoders
+ * @connector: &struct drm_connector pointer
+ * @encoder: &struct drm_encoder pointer used as cursor
+ */
+#define drm_connector_for_each_possible_encoder(connector, encoder) \
+ drm_for_each_encoder_mask(encoder, (connector)->dev, \
+ (connector)->possible_encoders)
+
+#endif