Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 340 insertions, 0 deletions

diff --git a/samples/pktgen/functions.sh b/samples/pktgen/functions.sh
new file mode 100644
index 0000000000..c08cefb8eb
--- /dev/null
+++ b/samples/pktgen/functions.sh
@@ -0,0 +1,340 @@
+#
+# Common functions used by pktgen scripts
+#  - Depending on bash 3 (or higher) syntax
+#
+# Author: Jesper Dangaaard Brouer
+# License: GPL
+
+set -o errexit
+
+## -- General shell logging cmds --
+function err() {
+    local exitcode=$1
+    shift
+    echo "ERROR: $@" >&2
+    exit $exitcode
+}
+
+function warn() {
+    echo "WARN : $@" >&2
+}
+
+function info() {
+    if [[ -n "$VERBOSE" ]]; then
+	echo "INFO : $@" >&2
+    fi
+}
+
+## -- Pktgen proc config commands -- ##
+export PROC_DIR=/proc/net/pktgen
+#
+# Three different shell functions for configuring the different
+# components of pktgen:
+#   pg_ctrl(), pg_thread() and pg_set().
+#
+# These functions correspond to pktgens different components.
+# * pg_ctrl()   control "pgctrl" (/proc/net/pktgen/pgctrl)
+# * pg_thread() control the kernel threads and binding to devices
+# * pg_set()    control setup of individual devices
+function pg_ctrl() {
+    local proc_file="pgctrl"
+    proc_cmd ${proc_file} "$@"
+}
+
+function pg_thread() {
+    local thread=$1
+    local proc_file="kpktgend_${thread}"
+    shift
+    proc_cmd ${proc_file} "$@"
+}
+
+function pg_set() {
+    local dev=$1
+    local proc_file="$dev"
+    shift
+    proc_cmd ${proc_file} "$@"
+}
+
+# More generic replacement for pgset(), that does not depend on global
+# variable for proc file.
+function proc_cmd() {
+    local result
+    local proc_file=$1
+    local status=0
+    # after shift, the remaining args are contained in $@
+    shift
+    local proc_ctrl=${PROC_DIR}/$proc_file
+    if [[ ! -e "$proc_ctrl" ]]; then
+	err 3 "proc file:$proc_ctrl does not exists (dev added to thread?)"
+    else
+	if [[ ! -w "$proc_ctrl" ]]; then
+	    err 4 "proc file:$proc_ctrl not writable, not root?!"
+	fi
+    fi
+
+    if [[ "$DEBUG" == "yes" ]]; then
+	echo "cmd: $@ > $proc_ctrl"
+    fi
+    # Quoting of "$@" is important for space expansion
+    echo "$@" > "$proc_ctrl" || status=$?
+
+    if [[ "$proc_file" != "pgctrl" ]]; then
+        result=$(grep "Result: OK:" $proc_ctrl) || true
+        if [[ "$result" == "" ]]; then
+            grep "Result:" $proc_ctrl >&2
+        fi
+    fi
+    if (( $status != 0 )); then
+	err 5 "Write error($status) occurred cmd: \"$@ > $proc_ctrl\""
+    fi
+}
+
+# Old obsolete "pgset" function, with slightly improved err handling
+function pgset() {
+    local result
+
+    if [[ "$DEBUG" == "yes" ]]; then
+	echo "cmd: $1 > $PGDEV"
+    fi
+    echo $1 > $PGDEV
+    local status=$?
+
+    result=`cat $PGDEV | fgrep "Result: OK:"`
+    if [[ "$result" == "" ]]; then
+         cat $PGDEV | fgrep Result:
+    fi
+    if (( $status != 0 )); then
+	err 5 "Write error($status) occurred cmd: \"$1 > $PGDEV\""
+    fi
+}
+
+function trap_exit()
+{
+    # Cleanup pktgen setup on exit if thats not "append mode"
+    if [[ -z "$APPEND" ]] && [[ $EUID -eq 0 ]]; then
+        trap 'pg_ctrl "reset"' EXIT
+    fi
+}
+
+## -- General shell tricks --
+
+function root_check_run_with_sudo() {
+    # Trick so, program can be run as normal user, will just use "sudo"
+    #  call as root_check_run_as_sudo "$@"
+    if [ "$EUID" -ne 0 ]; then
+	if [ -x $0 ]; then # Directly executable use sudo
+	    info "Not root, running with sudo"
+            sudo -E "$0" "$@"
+            exit $?
+	fi
+	err 4 "cannot perform sudo run of $0"
+    fi
+}
+
+# Exact input device's NUMA node info
+function get_iface_node()
+{
+    local node=$(</sys/class/net/$1/device/numa_node)
+    if [[ $node == -1 ]]; then
+        echo 0
+    else
+        echo $node
+    fi
+}
+
+# Given an Dev/iface, get its queues' irq numbers
+function get_iface_irqs()
+{
+	local IFACE=$1
+	local queues="${IFACE}-.*TxRx"
+
+	irqs=$(grep "$queues" /proc/interrupts | cut -f1 -d:)
+	[ -z "$irqs" ] && irqs=$(grep $IFACE /proc/interrupts | cut -f1 -d:)
+	[ -z "$irqs" ] && irqs=$(for i in `ls -Ux /sys/class/net/$IFACE/device/msi_irqs` ;\
+	    do grep "$i:.*TxRx" /proc/interrupts | grep -v fdir | cut -f 1 -d : ;\
+	    done)
+	[ -z "$irqs" ] && err 3 "Could not find interrupts for $IFACE"
+
+	echo $irqs
+}
+
+# Given a NUMA node, return cpu ids belonging to it.
+function get_node_cpus()
+{
+	local node=$1
+	local node_cpu_list
+	local node_cpu_range_list=`cut -f1- -d, --output-delimiter=" " \
+	                  /sys/devices/system/node/node$node/cpulist`
+
+	for cpu_range in $node_cpu_range_list
+	do
+	    node_cpu_list="$node_cpu_list "`seq -s " " ${cpu_range//-/ }`
+	done
+
+	echo $node_cpu_list
+}
+
+# Check $1 is in between $2, $3 ($2 <= $1 <= $3)
+function in_between() { [[ ($1 -ge $2) && ($1 -le $3) ]] ; }
+
+# Extend shrunken IPv6 address.
+# fe80::42:bcff:fe84:e10a => fe80:0:0:0:42:bcff:fe84:e10a
+function extend_addr6()
+{
+    local addr=$1
+    local sep=: sep2=::
+    local sep_cnt=$(tr -cd $sep <<< $1 | wc -c)
+    local shrink
+
+    # separator count should be (2 <= $sep_cnt <= 7)
+    if ! (in_between $sep_cnt 2 7); then
+        err 5 "Invalid IP6 address: $1"
+    fi
+
+    # if shrink '::' occurs multiple, it's malformed.
+    shrink=( $(grep -E -o "$sep{2,}" <<< $addr) )
+    if [[ ${#shrink[@]} -ne 0 ]]; then
+        if [[ ${#shrink[@]} -gt 1 || ( ${shrink[0]} != $sep2 ) ]]; then
+            err 5 "Invalid IP6 address: $1"
+        fi
+    fi
+
+    # add 0 at begin & end, and extend addr by adding :0
+    [[ ${addr:0:1} == $sep ]] && addr=0${addr}
+    [[ ${addr: -1} == $sep ]] && addr=${addr}0
+    echo "${addr/$sep2/$(printf ':0%.s' $(seq $[8-sep_cnt])):}"
+}
+
+# Given a single IP(v4/v6) address, whether it is valid.
+function validate_addr()
+{
+    # check function is called with (funcname)6
+    [[ ${FUNCNAME[1]: -1} == 6 ]] && local IP6=6
+    local bitlen=$[ IP6 ? 128 : 32 ]
+    local len=$[ IP6 ? 8 : 4 ]
+    local max=$[ 2**(len*2)-1 ]
+    local net prefix
+    local addr sep
+
+    IFS='/' read net prefix <<< $1
+    [[ $IP6 ]] && net=$(extend_addr6 $net)
+
+    # if prefix exists, check (0 <= $prefix <= $bitlen)
+    if [[ -n $prefix ]]; then
+        if ! (in_between $prefix 0 $bitlen); then
+            err 5 "Invalid prefix: /$prefix"
+        fi
+    fi
+
+    # set separator for each IP(v4/v6)
+    [[ $IP6 ]] && sep=: || sep=.
+    IFS=$sep read -a addr <<< $net
+
+    # array length
+    if [[ ${#addr[@]} != $len ]]; then
+        err 5 "Invalid IP$IP6 address: $1"
+    fi
+
+    # check each digit (0 <= $digit <= $max)
+    for digit in "${addr[@]}"; do
+        [[ $IP6 ]] && digit=$[ 16#$digit ]
+        if ! (in_between $digit 0 $max); then
+            err 5 "Invalid IP$IP6 address: $1"
+        fi
+    done
+
+    return 0
+}
+
+function validate_addr6() { validate_addr $@ ; }
+
+# Given a single IP(v4/v6) or CIDR, return minimum and maximum IP addr.
+function parse_addr()
+{
+    # check function is called with (funcname)6
+    [[ ${FUNCNAME[1]: -1} == 6 ]] && local IP6=6
+    local net prefix
+    local min_ip max_ip
+
+    IFS='/' read net prefix <<< $1
+    [[ $IP6 ]] && net=$(extend_addr6 $net)
+
+    if [[ -z $prefix ]]; then
+        min_ip=$net
+        max_ip=$net
+    else
+        # defining array for converting Decimal 2 Binary
+        # 00000000 00000001 00000010 00000011 00000100 ...
+        local d2b='{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}'
+        [[ $IP6 ]] && d2b+=$d2b
+        eval local D2B=($d2b)
+
+        local bitlen=$[ IP6 ? 128 : 32 ]
+        local remain=$[ bitlen-prefix ]
+        local octet=$[ IP6 ? 16 : 8 ]
+        local min_mask max_mask
+        local min max
+        local ip_bit
+        local ip sep
+
+        # set separator for each IP(v4/v6)
+        [[ $IP6 ]] && sep=: || sep=.
+        IFS=$sep read -ra ip <<< $net
+
+        min_mask="$(printf '1%.s' $(seq $prefix))$(printf '0%.s' $(seq $remain))"
+        max_mask="$(printf '0%.s' $(seq $prefix))$(printf '1%.s' $(seq $remain))"
+
+        # calculate min/max ip with &,| operator
+        for i in "${!ip[@]}"; do
+            digit=$[ IP6 ? 16#${ip[$i]} : ${ip[$i]} ]
+            ip_bit=${D2B[$digit]}
+
+            idx=$[ octet*i ]
+            min[$i]=$[ 2#$ip_bit & 2#${min_mask:$idx:$octet} ]
+            max[$i]=$[ 2#$ip_bit | 2#${max_mask:$idx:$octet} ]
+            [[ $IP6 ]] && { min[$i]=$(printf '%X' ${min[$i]});
+                            max[$i]=$(printf '%X' ${max[$i]}); }
+        done
+
+        min_ip=$(IFS=$sep; echo "${min[*]}")
+        max_ip=$(IFS=$sep; echo "${max[*]}")
+    fi
+
+    echo $min_ip $max_ip
+}
+
+function parse_addr6() { parse_addr $@ ; }
+
+# Given a single or range of port(s), return minimum and maximum port number.
+function parse_ports()
+{
+    local port_str=$1
+    local port_list
+    local min_port
+    local max_port
+
+    IFS="-" read -ra port_list <<< $port_str
+
+    min_port=${port_list[0]}
+    max_port=${port_list[1]:-$min_port}
+
+    echo $min_port $max_port
+}
+
+# Given a minimum and maximum port, verify port number.
+function validate_ports()
+{
+    local min_port=$1
+    local max_port=$2
+
+    # 1 <= port <= 65535
+    if (in_between $min_port 1 65535); then
+	if (in_between $max_port 1 65535); then
+	    if [[ $min_port -le $max_port ]]; then
+		return 0
+	    fi
+	fi
+    fi
+
+    err 5 "Invalid port(s): $min_port-$max_port"
+}