summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/tas5720.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /sound/soc/codecs/tas5720.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'sound/soc/codecs/tas5720.c')
-rw-r--r--sound/soc/codecs/tas5720.c831
1 files changed, 831 insertions, 0 deletions
diff --git a/sound/soc/codecs/tas5720.c b/sound/soc/codecs/tas5720.c
new file mode 100644
index 0000000000..6dd6c0896e
--- /dev/null
+++ b/sound/soc/codecs/tas5720.c
@@ -0,0 +1,831 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tas5720.c - ALSA SoC Texas Instruments TAS5720 Mono Audio Amplifier
+ *
+ * Copyright (C)2015-2016 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Author: Andreas Dannenberg <dannenberg@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+
+#include "tas5720.h"
+
+/* Define how often to check (and clear) the fault status register (in ms) */
+#define TAS5720_FAULT_CHECK_INTERVAL 200
+
+enum tas572x_type {
+ TAS5720,
+ TAS5720A_Q1,
+ TAS5722,
+};
+
+static const char * const tas5720_supply_names[] = {
+ "dvdd", /* Digital power supply. Connect to 3.3-V supply. */
+ "pvdd", /* Class-D amp and analog power supply (connected). */
+};
+
+#define TAS5720_NUM_SUPPLIES ARRAY_SIZE(tas5720_supply_names)
+
+struct tas5720_data {
+ struct snd_soc_component *component;
+ struct regmap *regmap;
+ struct i2c_client *tas5720_client;
+ enum tas572x_type devtype;
+ struct regulator_bulk_data supplies[TAS5720_NUM_SUPPLIES];
+ struct delayed_work fault_check_work;
+ unsigned int last_fault;
+};
+
+static int tas5720_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ unsigned int rate = params_rate(params);
+ bool ssz_ds;
+ int ret;
+
+ switch (rate) {
+ case 44100:
+ case 48000:
+ ssz_ds = false;
+ break;
+ case 88200:
+ case 96000:
+ ssz_ds = true;
+ break;
+ default:
+ dev_err(component->dev, "unsupported sample rate: %u\n", rate);
+ return -EINVAL;
+ }
+
+ ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG,
+ TAS5720_SSZ_DS, ssz_ds);
+ if (ret < 0) {
+ dev_err(component->dev, "error setting sample rate: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tas5720_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_component *component = dai->component;
+ u8 serial_format;
+ int ret;
+
+ if ((fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) != SND_SOC_DAIFMT_CBC_CFC) {
+ dev_vdbg(component->dev, "DAI clocking invalid\n");
+ return -EINVAL;
+ }
+
+ switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK |
+ SND_SOC_DAIFMT_INV_MASK)) {
+ case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF):
+ /* 1st data bit occur one BCLK cycle after the frame sync */
+ serial_format = TAS5720_SAIF_I2S;
+ break;
+ case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF):
+ /*
+ * Note that although the TAS5720 does not have a dedicated DSP
+ * mode it doesn't care about the LRCLK duty cycle during TDM
+ * operation. Therefore we can use the device's I2S mode with
+ * its delaying of the 1st data bit to receive DSP_A formatted
+ * data. See device datasheet for additional details.
+ */
+ serial_format = TAS5720_SAIF_I2S;
+ break;
+ case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF):
+ /*
+ * Similar to DSP_A, we can use the fact that the TAS5720 does
+ * not care about the LRCLK duty cycle during TDM to receive
+ * DSP_B formatted data in LEFTJ mode (no delaying of the 1st
+ * data bit).
+ */
+ serial_format = TAS5720_SAIF_LEFTJ;
+ break;
+ case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF):
+ /* No delay after the frame sync */
+ serial_format = TAS5720_SAIF_LEFTJ;
+ break;
+ default:
+ dev_vdbg(component->dev, "DAI Format is not found\n");
+ return -EINVAL;
+ }
+
+ ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG,
+ TAS5720_SAIF_FORMAT_MASK,
+ serial_format);
+ if (ret < 0) {
+ dev_err(component->dev, "error setting SAIF format: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tas5720_set_dai_tdm_slot(struct snd_soc_dai *dai,
+ unsigned int tx_mask, unsigned int rx_mask,
+ int slots, int slot_width)
+{
+ struct snd_soc_component *component = dai->component;
+ struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
+ unsigned int first_slot;
+ int ret;
+
+ if (!tx_mask) {
+ dev_err(component->dev, "tx masks must not be 0\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Determine the first slot that is being requested. We will only
+ * use the first slot that is found since the TAS5720 is a mono
+ * amplifier.
+ */
+ first_slot = __ffs(tx_mask);
+
+ if (first_slot > 7) {
+ dev_err(component->dev, "slot selection out of bounds (%u)\n",
+ first_slot);
+ return -EINVAL;
+ }
+
+ /*
+ * Enable manual TDM slot selection (instead of I2C ID based).
+ * This is not applicable to TAS5720A-Q1.
+ */
+ switch (tas5720->devtype) {
+ case TAS5720A_Q1:
+ break;
+ default:
+ ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG,
+ TAS5720_TDM_CFG_SRC, TAS5720_TDM_CFG_SRC);
+ if (ret < 0)
+ goto error_snd_soc_component_update_bits;
+
+ /* Configure the TDM slot to process audio from */
+ ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL2_REG,
+ TAS5720_TDM_SLOT_SEL_MASK, first_slot);
+ if (ret < 0)
+ goto error_snd_soc_component_update_bits;
+ break;
+ }
+
+ /* Configure TDM slot width. This is only applicable to TAS5722. */
+ switch (tas5720->devtype) {
+ case TAS5722:
+ ret = snd_soc_component_update_bits(component, TAS5722_DIGITAL_CTRL2_REG,
+ TAS5722_TDM_SLOT_16B,
+ slot_width == 16 ?
+ TAS5722_TDM_SLOT_16B : 0);
+ if (ret < 0)
+ goto error_snd_soc_component_update_bits;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+
+error_snd_soc_component_update_bits:
+ dev_err(component->dev, "error configuring TDM mode: %d\n", ret);
+ return ret;
+}
+
+static int tas5720_mute_soc_component(struct snd_soc_component *component, int mute)
+{
+ struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
+ unsigned int reg, mask;
+ int ret;
+
+ switch (tas5720->devtype) {
+ case TAS5720A_Q1:
+ reg = TAS5720_Q1_VOLUME_CTRL_CFG_REG;
+ mask = TAS5720_Q1_MUTE;
+ break;
+ default:
+ reg = TAS5720_DIGITAL_CTRL2_REG;
+ mask = TAS5720_MUTE;
+ break;
+ }
+
+ ret = snd_soc_component_update_bits(component, reg, mask, mute ? mask : 0);
+ if (ret < 0) {
+ dev_err(component->dev, "error (un-)muting device: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tas5720_mute(struct snd_soc_dai *dai, int mute, int direction)
+{
+ return tas5720_mute_soc_component(dai->component, mute);
+}
+
+static void tas5720_fault_check_work(struct work_struct *work)
+{
+ struct tas5720_data *tas5720 = container_of(work, struct tas5720_data,
+ fault_check_work.work);
+ struct device *dev = tas5720->component->dev;
+ unsigned int curr_fault;
+ int ret;
+
+ ret = regmap_read(tas5720->regmap, TAS5720_FAULT_REG, &curr_fault);
+ if (ret < 0) {
+ dev_err(dev, "failed to read FAULT register: %d\n", ret);
+ goto out;
+ }
+
+ /* Check/handle all errors except SAIF clock errors */
+ curr_fault &= TAS5720_OCE | TAS5720_DCE | TAS5720_OTE;
+
+ /*
+ * Only flag errors once for a given occurrence. This is needed as
+ * the TAS5720 will take time clearing the fault condition internally
+ * during which we don't want to bombard the system with the same
+ * error message over and over.
+ */
+ if ((curr_fault & TAS5720_OCE) && !(tas5720->last_fault & TAS5720_OCE))
+ dev_crit(dev, "experienced an over current hardware fault\n");
+
+ if ((curr_fault & TAS5720_DCE) && !(tas5720->last_fault & TAS5720_DCE))
+ dev_crit(dev, "experienced a DC detection fault\n");
+
+ if ((curr_fault & TAS5720_OTE) && !(tas5720->last_fault & TAS5720_OTE))
+ dev_crit(dev, "experienced an over temperature fault\n");
+
+ /* Store current fault value so we can detect any changes next time */
+ tas5720->last_fault = curr_fault;
+
+ if (!curr_fault)
+ goto out;
+
+ /*
+ * Periodically toggle SDZ (shutdown bit) H->L->H to clear any latching
+ * faults as long as a fault condition persists. Always going through
+ * the full sequence no matter the first return value to minimizes
+ * chances for the device to end up in shutdown mode.
+ */
+ ret = regmap_write_bits(tas5720->regmap, TAS5720_POWER_CTRL_REG,
+ TAS5720_SDZ, 0);
+ if (ret < 0)
+ dev_err(dev, "failed to write POWER_CTRL register: %d\n", ret);
+
+ ret = regmap_write_bits(tas5720->regmap, TAS5720_POWER_CTRL_REG,
+ TAS5720_SDZ, TAS5720_SDZ);
+ if (ret < 0)
+ dev_err(dev, "failed to write POWER_CTRL register: %d\n", ret);
+
+out:
+ /* Schedule the next fault check at the specified interval */
+ schedule_delayed_work(&tas5720->fault_check_work,
+ msecs_to_jiffies(TAS5720_FAULT_CHECK_INTERVAL));
+}
+
+static int tas5720_codec_probe(struct snd_soc_component *component)
+{
+ struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
+ unsigned int device_id, expected_device_id;
+ int ret;
+
+ tas5720->component = component;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(tas5720->supplies),
+ tas5720->supplies);
+ if (ret != 0) {
+ dev_err(component->dev, "failed to enable supplies: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Take a liberal approach to checking the device ID to allow the
+ * driver to be used even if the device ID does not match, however
+ * issue a warning if there is a mismatch.
+ */
+ ret = regmap_read(tas5720->regmap, TAS5720_DEVICE_ID_REG, &device_id);
+ if (ret < 0) {
+ dev_err(component->dev, "failed to read device ID register: %d\n",
+ ret);
+ goto probe_fail;
+ }
+
+ switch (tas5720->devtype) {
+ case TAS5720:
+ expected_device_id = TAS5720_DEVICE_ID;
+ break;
+ case TAS5720A_Q1:
+ expected_device_id = TAS5720A_Q1_DEVICE_ID;
+ break;
+ case TAS5722:
+ expected_device_id = TAS5722_DEVICE_ID;
+ break;
+ default:
+ dev_err(component->dev, "unexpected private driver data\n");
+ ret = -EINVAL;
+ goto probe_fail;
+ }
+
+ if (device_id != expected_device_id)
+ dev_warn(component->dev, "wrong device ID. expected: %u read: %u\n",
+ expected_device_id, device_id);
+
+ /* Set device to mute */
+ ret = tas5720_mute_soc_component(component, 1);
+ if (ret < 0)
+ goto error_snd_soc_component_update_bits;
+
+ /* Set Bit 7 in TAS5720_ANALOG_CTRL_REG to 1 for TAS5720A_Q1 */
+ switch (tas5720->devtype) {
+ case TAS5720A_Q1:
+ ret = snd_soc_component_update_bits(component, TAS5720_ANALOG_CTRL_REG,
+ TAS5720_Q1_RESERVED7_BIT,
+ TAS5720_Q1_RESERVED7_BIT);
+ break;
+ default:
+ break;
+ }
+ if (ret < 0)
+ goto error_snd_soc_component_update_bits;
+
+ /*
+ * Enter shutdown mode - our default when not playing audio - to
+ * minimize current consumption. On the TAS5720 there is no real down
+ * side doing so as all device registers are preserved and the wakeup
+ * of the codec is rather quick which we do using a dapm widget.
+ */
+ ret = snd_soc_component_update_bits(component, TAS5720_POWER_CTRL_REG,
+ TAS5720_SDZ, 0);
+ if (ret < 0)
+ goto error_snd_soc_component_update_bits;
+
+ INIT_DELAYED_WORK(&tas5720->fault_check_work, tas5720_fault_check_work);
+
+ return 0;
+
+error_snd_soc_component_update_bits:
+ dev_err(component->dev, "error configuring device registers: %d\n", ret);
+
+probe_fail:
+ regulator_bulk_disable(ARRAY_SIZE(tas5720->supplies),
+ tas5720->supplies);
+ return ret;
+}
+
+static void tas5720_codec_remove(struct snd_soc_component *component)
+{
+ struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ cancel_delayed_work_sync(&tas5720->fault_check_work);
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(tas5720->supplies),
+ tas5720->supplies);
+ if (ret < 0)
+ dev_err(component->dev, "failed to disable supplies: %d\n", ret);
+};
+
+static int tas5720_dac_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ if (event & SND_SOC_DAPM_POST_PMU) {
+ /* Take TAS5720 out of shutdown mode */
+ ret = snd_soc_component_update_bits(component, TAS5720_POWER_CTRL_REG,
+ TAS5720_SDZ, TAS5720_SDZ);
+ if (ret < 0) {
+ dev_err(component->dev, "error waking component: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Observe codec shutdown-to-active time. The datasheet only
+ * lists a nominal value however just use-it as-is without
+ * additional padding to minimize the delay introduced in
+ * starting to play audio (actually there is other setup done
+ * by the ASoC framework that will provide additional delays,
+ * so we should always be safe).
+ */
+ msleep(25);
+
+ /* Turn on TAS5720 periodic fault checking/handling */
+ tas5720->last_fault = 0;
+ schedule_delayed_work(&tas5720->fault_check_work,
+ msecs_to_jiffies(TAS5720_FAULT_CHECK_INTERVAL));
+ } else if (event & SND_SOC_DAPM_PRE_PMD) {
+ /* Disable TAS5720 periodic fault checking/handling */
+ cancel_delayed_work_sync(&tas5720->fault_check_work);
+
+ /* Place TAS5720 in shutdown mode to minimize current draw */
+ ret = snd_soc_component_update_bits(component, TAS5720_POWER_CTRL_REG,
+ TAS5720_SDZ, 0);
+ if (ret < 0) {
+ dev_err(component->dev, "error shutting down component: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tas5720_suspend(struct snd_soc_component *component)
+{
+ struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ regcache_cache_only(tas5720->regmap, true);
+ regcache_mark_dirty(tas5720->regmap);
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(tas5720->supplies),
+ tas5720->supplies);
+ if (ret < 0)
+ dev_err(component->dev, "failed to disable supplies: %d\n", ret);
+
+ return ret;
+}
+
+static int tas5720_resume(struct snd_soc_component *component)
+{
+ struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(tas5720->supplies),
+ tas5720->supplies);
+ if (ret < 0) {
+ dev_err(component->dev, "failed to enable supplies: %d\n", ret);
+ return ret;
+ }
+
+ regcache_cache_only(tas5720->regmap, false);
+
+ ret = regcache_sync(tas5720->regmap);
+ if (ret < 0) {
+ dev_err(component->dev, "failed to sync regcache: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+#else
+#define tas5720_suspend NULL
+#define tas5720_resume NULL
+#endif
+
+static bool tas5720_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case TAS5720_DEVICE_ID_REG:
+ case TAS5720_FAULT_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config tas5720_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = TAS5720_MAX_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = tas5720_is_volatile_reg,
+};
+
+static const struct regmap_config tas5720a_q1_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = TAS5720_MAX_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = tas5720_is_volatile_reg,
+};
+
+static const struct regmap_config tas5722_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = TAS5722_MAX_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = tas5720_is_volatile_reg,
+};
+
+/*
+ * DAC analog gain. There are four discrete values to select from, ranging
+ * from 19.2 dB to 26.3dB.
+ */
+static const DECLARE_TLV_DB_RANGE(dac_analog_tlv,
+ 0x0, 0x0, TLV_DB_SCALE_ITEM(1920, 0, 0),
+ 0x1, 0x1, TLV_DB_SCALE_ITEM(2070, 0, 0),
+ 0x2, 0x2, TLV_DB_SCALE_ITEM(2350, 0, 0),
+ 0x3, 0x3, TLV_DB_SCALE_ITEM(2630, 0, 0),
+);
+
+/*
+ * DAC analog gain for TAS5720A-Q1. There are three discrete values to select from, ranging
+ * from 19.2 dB to 25.0dB.
+ */
+static const DECLARE_TLV_DB_RANGE(dac_analog_tlv_a_q1,
+ 0x0, 0x0, TLV_DB_SCALE_ITEM(1920, 0, 0),
+ 0x1, 0x1, TLV_DB_SCALE_ITEM(2260, 0, 0),
+ 0x2, 0x2, TLV_DB_SCALE_ITEM(2500, 0, 0),
+);
+
+/*
+ * DAC digital volumes. From -103.5 to 24 dB in 0.5 dB or 0.25 dB steps
+ * depending on the device. Note that setting the gain below -100 dB
+ * (register value <0x7) is effectively a MUTE as per device datasheet.
+ *
+ * Note that for the TAS5722 the digital volume controls are actually split
+ * over two registers, so we need custom getters/setters for access.
+ */
+static DECLARE_TLV_DB_SCALE(tas5720_dac_tlv, -10350, 50, 0);
+static DECLARE_TLV_DB_SCALE(tas5722_dac_tlv, -10350, 25, 0);
+
+static int tas5722_volume_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ unsigned int val;
+
+ val = snd_soc_component_read(component, TAS5720_VOLUME_CTRL_REG);
+ ucontrol->value.integer.value[0] = val << 1;
+
+ val = snd_soc_component_read(component, TAS5722_DIGITAL_CTRL2_REG);
+ ucontrol->value.integer.value[0] |= val & TAS5722_VOL_CONTROL_LSB;
+
+ return 0;
+}
+
+static int tas5722_volume_set(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ unsigned int sel = ucontrol->value.integer.value[0];
+
+ snd_soc_component_write(component, TAS5720_VOLUME_CTRL_REG, sel >> 1);
+ snd_soc_component_update_bits(component, TAS5722_DIGITAL_CTRL2_REG,
+ TAS5722_VOL_CONTROL_LSB, sel);
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new tas5720_snd_controls[] = {
+ SOC_SINGLE_TLV("Speaker Driver Playback Volume",
+ TAS5720_VOLUME_CTRL_REG, 0, 0xff, 0, tas5720_dac_tlv),
+ SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG,
+ TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv),
+};
+
+static const struct snd_kcontrol_new tas5720a_q1_snd_controls[] = {
+ SOC_DOUBLE_R_TLV("Speaker Driver Playback Volume",
+ TAS5720_Q1_VOLUME_CTRL_LEFT_REG,
+ TAS5720_Q1_VOLUME_CTRL_RIGHT_REG,
+ 0, 0xff, 0, tas5720_dac_tlv),
+ SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG,
+ TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv_a_q1),
+};
+
+static const struct snd_kcontrol_new tas5722_snd_controls[] = {
+ SOC_SINGLE_EXT_TLV("Speaker Driver Playback Volume",
+ 0, 0, 511, 0,
+ tas5722_volume_get, tas5722_volume_set,
+ tas5722_dac_tlv),
+ SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG,
+ TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv),
+};
+
+static const struct snd_soc_dapm_widget tas5720_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas5720_dac_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_OUTPUT("OUT")
+};
+
+static const struct snd_soc_dapm_route tas5720_audio_map[] = {
+ { "DAC", NULL, "DAC IN" },
+ { "OUT", NULL, "DAC" },
+};
+
+static const struct snd_soc_component_driver soc_component_dev_tas5720 = {
+ .probe = tas5720_codec_probe,
+ .remove = tas5720_codec_remove,
+ .suspend = tas5720_suspend,
+ .resume = tas5720_resume,
+ .controls = tas5720_snd_controls,
+ .num_controls = ARRAY_SIZE(tas5720_snd_controls),
+ .dapm_widgets = tas5720_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets),
+ .dapm_routes = tas5720_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map),
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+};
+
+static const struct snd_soc_component_driver soc_component_dev_tas5720_a_q1 = {
+ .probe = tas5720_codec_probe,
+ .remove = tas5720_codec_remove,
+ .suspend = tas5720_suspend,
+ .resume = tas5720_resume,
+ .controls = tas5720a_q1_snd_controls,
+ .num_controls = ARRAY_SIZE(tas5720a_q1_snd_controls),
+ .dapm_widgets = tas5720_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets),
+ .dapm_routes = tas5720_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map),
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+};
+
+static const struct snd_soc_component_driver soc_component_dev_tas5722 = {
+ .probe = tas5720_codec_probe,
+ .remove = tas5720_codec_remove,
+ .suspend = tas5720_suspend,
+ .resume = tas5720_resume,
+ .controls = tas5722_snd_controls,
+ .num_controls = ARRAY_SIZE(tas5722_snd_controls),
+ .dapm_widgets = tas5720_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets),
+ .dapm_routes = tas5720_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map),
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+};
+
+/* PCM rates supported by the TAS5720 driver */
+#define TAS5720_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+/* Formats supported by TAS5720 driver */
+#define TAS5720_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE)
+
+static const struct snd_soc_dai_ops tas5720_speaker_dai_ops = {
+ .hw_params = tas5720_hw_params,
+ .set_fmt = tas5720_set_dai_fmt,
+ .set_tdm_slot = tas5720_set_dai_tdm_slot,
+ .mute_stream = tas5720_mute,
+ .no_capture_mute = 1,
+};
+
+/*
+ * TAS5720 DAI structure
+ *
+ * Note that were are advertising .playback.channels_max = 2 despite this being
+ * a mono amplifier. The reason for that is that some serial ports such as TI's
+ * McASP module have a minimum number of channels (2) that they can output.
+ * Advertising more channels than we have will allow us to interface with such
+ * a serial port without really any negative side effects as the TAS5720 will
+ * simply ignore any extra channel(s) asides from the one channel that is
+ * configured to be played back.
+ */
+static struct snd_soc_dai_driver tas5720_dai[] = {
+ {
+ .name = "tas5720-amplifier",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = TAS5720_RATES,
+ .formats = TAS5720_FORMATS,
+ },
+ .ops = &tas5720_speaker_dai_ops,
+ },
+};
+
+static const struct i2c_device_id tas5720_id[] = {
+ { "tas5720", TAS5720 },
+ { "tas5720a-q1", TAS5720A_Q1 },
+ { "tas5722", TAS5722 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tas5720_id);
+
+static int tas5720_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct tas5720_data *data;
+ const struct regmap_config *regmap_config;
+ const struct i2c_device_id *id;
+ int ret;
+ int i;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ id = i2c_match_id(tas5720_id, client);
+ data->tas5720_client = client;
+ data->devtype = id->driver_data;
+
+ switch (id->driver_data) {
+ case TAS5720:
+ regmap_config = &tas5720_regmap_config;
+ break;
+ case TAS5720A_Q1:
+ regmap_config = &tas5720a_q1_regmap_config;
+ break;
+ case TAS5722:
+ regmap_config = &tas5722_regmap_config;
+ break;
+ default:
+ dev_err(dev, "unexpected private driver data\n");
+ return -EINVAL;
+ }
+ data->regmap = devm_regmap_init_i2c(client, regmap_config);
+ if (IS_ERR(data->regmap)) {
+ ret = PTR_ERR(data->regmap);
+ dev_err(dev, "failed to allocate register map: %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->supplies); i++)
+ data->supplies[i].supply = tas5720_supply_names[i];
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
+ data->supplies);
+ if (ret != 0) {
+ dev_err(dev, "failed to request supplies: %d\n", ret);
+ return ret;
+ }
+
+ dev_set_drvdata(dev, data);
+
+ switch (id->driver_data) {
+ case TAS5720:
+ ret = devm_snd_soc_register_component(&client->dev,
+ &soc_component_dev_tas5720,
+ tas5720_dai,
+ ARRAY_SIZE(tas5720_dai));
+ break;
+ case TAS5720A_Q1:
+ ret = devm_snd_soc_register_component(&client->dev,
+ &soc_component_dev_tas5720_a_q1,
+ tas5720_dai,
+ ARRAY_SIZE(tas5720_dai));
+ break;
+ case TAS5722:
+ ret = devm_snd_soc_register_component(&client->dev,
+ &soc_component_dev_tas5722,
+ tas5720_dai,
+ ARRAY_SIZE(tas5720_dai));
+ break;
+ default:
+ dev_err(dev, "unexpected private driver data\n");
+ return -EINVAL;
+ }
+ if (ret < 0) {
+ dev_err(dev, "failed to register component: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id tas5720_of_match[] = {
+ { .compatible = "ti,tas5720", },
+ { .compatible = "ti,tas5720a-q1", },
+ { .compatible = "ti,tas5722", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tas5720_of_match);
+#endif
+
+static struct i2c_driver tas5720_i2c_driver = {
+ .driver = {
+ .name = "tas5720",
+ .of_match_table = of_match_ptr(tas5720_of_match),
+ },
+ .probe = tas5720_probe,
+ .id_table = tas5720_id,
+};
+
+module_i2c_driver(tas5720_i2c_driver);
+
+MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>");
+MODULE_DESCRIPTION("TAS5720 Audio amplifier driver");
+MODULE_LICENSE("GPL");