Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 5264 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh
new file mode 100755
index 0000000000..7f7d20f222
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh
@@ -0,0 +1,713 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="fw_flash_test params_test regions_test reload_test \
+	   netns_reload_test resource_test dev_info_test \
+	   empty_reporter_test dummy_reporter_test rate_test"
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+
+BUS_ADDR=10
+PORT_COUNT=4
+VF_COUNT=4
+DEV_NAME=netdevsim$BUS_ADDR
+SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/
+DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV_NAME/
+DL_HANDLE=netdevsim/$DEV_NAME
+
+wait_for_devlink()
+{
+	"$@" | grep -q $DL_HANDLE
+}
+
+devlink_wait()
+{
+	local timeout=$1
+
+	busywait "$timeout" wait_for_devlink devlink dev
+}
+
+fw_flash_test()
+{
+	RET=0
+
+	devlink dev flash $DL_HANDLE file dummy
+	check_err $? "Failed to flash with status updates on"
+
+	devlink dev flash $DL_HANDLE file dummy component fw.mgmt
+	check_err $? "Failed to flash with component attribute"
+
+	devlink dev flash $DL_HANDLE file dummy overwrite settings
+	check_fail $? "Flash with overwrite settings should be rejected"
+
+	echo "1"> $DEBUGFS_DIR/fw_update_overwrite_mask
+	check_err $? "Failed to change allowed overwrite mask"
+
+	devlink dev flash $DL_HANDLE file dummy overwrite settings
+	check_err $? "Failed to flash with settings overwrite enabled"
+
+	devlink dev flash $DL_HANDLE file dummy overwrite identifiers
+	check_fail $? "Flash with overwrite settings should be identifiers"
+
+	echo "3"> $DEBUGFS_DIR/fw_update_overwrite_mask
+	check_err $? "Failed to change allowed overwrite mask"
+
+	devlink dev flash $DL_HANDLE file dummy overwrite identifiers overwrite settings
+	check_err $? "Failed to flash with settings and identifiers overwrite enabled"
+
+	echo "n"> $DEBUGFS_DIR/fw_update_status
+	check_err $? "Failed to disable status updates"
+
+	devlink dev flash $DL_HANDLE file dummy
+	check_err $? "Failed to flash with status updates off"
+
+	log_test "fw flash test"
+}
+
+param_get()
+{
+	local name=$1
+
+	cmd_jq "devlink dev param show $DL_HANDLE name $name -j" \
+	       '.[][][].values[] | select(.cmode == "driverinit").value'
+}
+
+param_set()
+{
+	local name=$1
+	local value=$2
+
+	devlink dev param set $DL_HANDLE name $name cmode driverinit value $value
+}
+
+check_value()
+{
+	local name=$1
+	local phase_name=$2
+	local expected_param_value=$3
+	local expected_debugfs_value=$4
+	local value
+
+	value=$(param_get $name)
+	check_err $? "Failed to get $name param value"
+	[ "$value" == "$expected_param_value" ]
+	check_err $? "Unexpected $phase_name $name param value"
+	value=$(<$DEBUGFS_DIR/$name)
+	check_err $? "Failed to get $name debugfs value"
+	[ "$value" == "$expected_debugfs_value" ]
+	check_err $? "Unexpected $phase_name $name debugfs value"
+}
+
+params_test()
+{
+	RET=0
+
+	local max_macs
+	local test1
+
+	check_value max_macs initial 32 32
+	check_value test1 initial true Y
+
+	param_set max_macs 16
+	check_err $? "Failed to set max_macs param value"
+	param_set test1 false
+	check_err $? "Failed to set test1 param value"
+
+	check_value max_macs post-set 16 32
+	check_value test1 post-set false Y
+
+	devlink dev reload $DL_HANDLE
+
+	check_value max_macs post-reload 16 16
+	check_value test1 post-reload false N
+
+	log_test "params test"
+}
+
+check_region_size()
+{
+	local name=$1
+	local size
+
+	size=$(devlink region show $DL_HANDLE/$name -j | jq -e -r '.[][].size')
+	check_err $? "Failed to get $name region size"
+	[ $size -eq 32768 ]
+	check_err $? "Invalid $name region size"
+}
+
+check_region_snapshot_count()
+{
+	local name=$1
+	local phase_name=$2
+	local expected_count=$3
+	local count
+
+	count=$(devlink region show $DL_HANDLE/$name -j | jq -e -r '.[][].snapshot | length')
+	[ $count -eq $expected_count ]
+	check_err $? "Unexpected $phase_name snapshot count"
+}
+
+regions_test()
+{
+	RET=0
+
+	local count
+
+	check_region_size dummy
+	check_region_snapshot_count dummy initial 0
+
+	echo ""> $DEBUGFS_DIR/take_snapshot
+	check_err $? "Failed to take first dummy region snapshot"
+	check_region_snapshot_count dummy post-first-snapshot 1
+
+	echo ""> $DEBUGFS_DIR/take_snapshot
+	check_err $? "Failed to take second dummy region snapshot"
+	check_region_snapshot_count dummy post-second-snapshot 2
+
+	echo ""> $DEBUGFS_DIR/take_snapshot
+	check_err $? "Failed to take third dummy region snapshot"
+	check_region_snapshot_count dummy post-third-snapshot 3
+
+	devlink region del $DL_HANDLE/dummy snapshot 1
+	check_err $? "Failed to delete first dummy region snapshot"
+
+	check_region_snapshot_count dummy post-first-delete 2
+
+	devlink region new $DL_HANDLE/dummy snapshot 25
+	check_err $? "Failed to create a new snapshot with id 25"
+
+	check_region_snapshot_count dummy post-first-request 3
+
+	devlink region dump $DL_HANDLE/dummy snapshot 25 >> /dev/null
+	check_err $? "Failed to dump snapshot with id 25"
+
+	devlink region read $DL_HANDLE/dummy snapshot 25 addr 0 len 1 >> /dev/null
+	check_err $? "Failed to read snapshot with id 25 (1 byte)"
+
+	devlink region read $DL_HANDLE/dummy snapshot 25 addr 128 len 128 >> /dev/null
+	check_err $? "Failed to read snapshot with id 25 (128 bytes)"
+
+	devlink region read $DL_HANDLE/dummy snapshot 25 addr 128 len $((1<<32)) >> /dev/null
+	check_err $? "Failed to read snapshot with id 25 (oversized)"
+
+	devlink region read $DL_HANDLE/dummy snapshot 25 addr $((1<<32)) len 128 >> /dev/null 2>&1
+	check_fail $? "Bad read of snapshot with id 25 did not fail"
+
+	devlink region del $DL_HANDLE/dummy snapshot 25
+	check_err $? "Failed to delete snapshot with id 25"
+
+	check_region_snapshot_count dummy post-second-delete 2
+
+	sid=$(devlink -j region new $DL_HANDLE/dummy | jq '.[][][][]')
+	check_err $? "Failed to create a new snapshot with id allocated by the kernel"
+
+	check_region_snapshot_count dummy post-first-request 3
+
+	devlink region dump $DL_HANDLE/dummy snapshot $sid >> /dev/null
+	check_err $? "Failed to dump a snapshot with id allocated by the kernel"
+
+	devlink region del $DL_HANDLE/dummy snapshot $sid
+	check_err $? "Failed to delete snapshot with id allocated by the kernel"
+
+	check_region_snapshot_count dummy post-first-request 2
+
+	log_test "regions test"
+}
+
+reload_test()
+{
+	RET=0
+
+	devlink dev reload $DL_HANDLE
+	check_err $? "Failed to reload"
+
+	echo "y"> $DEBUGFS_DIR/fail_reload
+	check_err $? "Failed to setup devlink reload to fail"
+
+	devlink dev reload $DL_HANDLE
+	check_fail $? "Unexpected success of devlink reload"
+
+	echo "n"> $DEBUGFS_DIR/fail_reload
+	check_err $? "Failed to setup devlink reload not to fail"
+
+	devlink dev reload $DL_HANDLE
+	check_err $? "Failed to reload after set not to fail"
+
+	echo "y"> $DEBUGFS_DIR/dont_allow_reload
+	check_err $? "Failed to forbid devlink reload"
+
+	devlink dev reload $DL_HANDLE
+	check_fail $? "Unexpected success of devlink reload"
+
+	echo "n"> $DEBUGFS_DIR/dont_allow_reload
+	check_err $? "Failed to re-enable devlink reload"
+
+	devlink dev reload $DL_HANDLE
+	check_err $? "Failed to reload after re-enable"
+
+	log_test "reload test"
+}
+
+netns_reload_test()
+{
+	RET=0
+
+	ip netns add testns1
+	check_err $? "Failed add netns \"testns1\""
+	ip netns add testns2
+	check_err $? "Failed add netns \"testns2\""
+
+	devlink dev reload $DL_HANDLE netns testns1
+	check_err $? "Failed to reload into netns \"testns1\""
+
+	devlink -N testns1 dev reload $DL_HANDLE netns testns2
+	check_err $? "Failed to reload from netns \"testns1\" into netns \"testns2\""
+
+	ip netns del testns2
+	ip netns del testns1
+
+	# Wait until netns async cleanup is done.
+	devlink_wait 2000
+
+	log_test "netns reload test"
+}
+
+DUMMYDEV="dummytest"
+
+res_val_get()
+{
+	local netns=$1
+	local parentname=$2
+	local name=$3
+	local type=$4
+
+	cmd_jq "devlink -N $netns resource show $DL_HANDLE -j" \
+	       ".[][][] | select(.name == \"$parentname\").resources[] \
+	        | select(.name == \"$name\").$type"
+}
+
+resource_test()
+{
+	RET=0
+
+	ip netns add testns1
+	check_err $? "Failed add netns \"testns1\""
+	ip netns add testns2
+	check_err $? "Failed add netns \"testns2\""
+
+	devlink dev reload $DL_HANDLE netns testns1
+	check_err $? "Failed to reload into netns \"testns1\""
+
+	# Create dummy dev to add the address and routes on.
+
+	ip -n testns1 link add name $DUMMYDEV type dummy
+	check_err $? "Failed create dummy device"
+	ip -n testns1 link set $DUMMYDEV up
+	check_err $? "Failed bring up dummy device"
+	ip -n testns1 a a 192.0.1.1/24 dev $DUMMYDEV
+	check_err $? "Failed add an IP address to dummy device"
+
+	local occ=$(res_val_get testns1 IPv4 fib occ)
+	local limit=$((occ+1))
+
+	# Set fib size limit to handle one another route only.
+
+	devlink -N testns1 resource set $DL_HANDLE path IPv4/fib size $limit
+	check_err $? "Failed to set IPv4/fib resource size"
+	local size_new=$(res_val_get testns1 IPv4 fib size_new)
+	[ "$size_new" -eq "$limit" ]
+	check_err $? "Unexpected \"size_new\" value (got $size_new, expected $limit)"
+
+	devlink -N testns1 dev reload $DL_HANDLE
+	check_err $? "Failed to reload"
+	local size=$(res_val_get testns1 IPv4 fib size)
+	[ "$size" -eq "$limit" ]
+	check_err $? "Unexpected \"size\" value (got $size, expected $limit)"
+
+	# Insert 2 routes, the first is going to be inserted,
+	# the second is expected to fail to be inserted.
+
+	ip -n testns1 r a 192.0.2.0/24 via 192.0.1.2
+	check_err $? "Failed to add route"
+
+	ip -n testns1 r a 192.0.3.0/24 via 192.0.1.2
+	check_fail $? "Unexpected successful route add over limit"
+
+	# Now create another dummy in second network namespace and
+	# insert two routes. That is over the limit of the netdevsim
+	# instance in the first namespace. Move the netdevsim instance
+	# into the second namespace and expect it to fail.
+
+	ip -n testns2 link add name $DUMMYDEV type dummy
+	check_err $? "Failed create dummy device"
+	ip -n testns2 link set $DUMMYDEV up
+	check_err $? "Failed bring up dummy device"
+	ip -n testns2 a a 192.0.1.1/24 dev $DUMMYDEV
+	check_err $? "Failed add an IP address to dummy device"
+	ip -n testns2 r a 192.0.2.0/24 via 192.0.1.2
+	check_err $? "Failed to add route"
+	ip -n testns2 r a 192.0.3.0/24 via 192.0.1.2
+	check_err $? "Failed to add route"
+
+	devlink -N testns1 dev reload $DL_HANDLE netns testns2
+	check_fail $? "Unexpected successful reload from netns \"testns1\" into netns \"testns2\""
+
+	devlink -N testns2 resource set $DL_HANDLE path IPv4/fib size ' -1'
+	check_err $? "Failed to reset IPv4/fib resource size"
+
+	devlink -N testns2 dev reload $DL_HANDLE netns 1
+	check_err $? "Failed to reload devlink back"
+
+	ip netns del testns2
+	ip netns del testns1
+
+	# Wait until netns async cleanup is done.
+	devlink_wait 2000
+
+	log_test "resource test"
+}
+
+info_get()
+{
+	local name=$1
+
+	cmd_jq "devlink dev info $DL_HANDLE -j" ".[][][\"$name\"]" "-e"
+}
+
+dev_info_test()
+{
+	RET=0
+
+	driver=$(info_get "driver")
+	check_err $? "Failed to get driver name"
+	[ "$driver" == "netdevsim" ]
+	check_err $? "Unexpected driver name $driver"
+
+	log_test "dev_info test"
+}
+
+empty_reporter_test()
+{
+	RET=0
+
+	devlink health show $DL_HANDLE reporter empty >/dev/null
+	check_err $? "Failed show empty reporter"
+
+	devlink health dump show $DL_HANDLE reporter empty >/dev/null
+	check_err $? "Failed show dump of empty reporter"
+
+	devlink health diagnose $DL_HANDLE reporter empty >/dev/null
+	check_err $? "Failed diagnose empty reporter"
+
+	devlink health recover $DL_HANDLE reporter empty
+	check_err $? "Failed recover empty reporter"
+
+	log_test "empty reporter test"
+}
+
+check_reporter_info()
+{
+	local name=$1
+	local expected_state=$2
+	local expected_error=$3
+	local expected_recover=$4
+	local expected_grace_period=$5
+	local expected_auto_recover=$6
+
+	local show=$(devlink health show $DL_HANDLE reporter $name -j | jq -e -r ".[][][]")
+	check_err $? "Failed show $name reporter"
+
+	local state=$(echo $show | jq -r ".state")
+	[ "$state" == "$expected_state" ]
+	check_err $? "Unexpected \"state\" value (got $state, expected $expected_state)"
+
+	local error=$(echo $show | jq -r ".error")
+	[ "$error" == "$expected_error" ]
+	check_err $? "Unexpected \"error\" value (got $error, expected $expected_error)"
+
+	local recover=`echo $show | jq -r ".recover"`
+	[ "$recover" == "$expected_recover" ]
+	check_err $? "Unexpected \"recover\" value (got $recover, expected $expected_recover)"
+
+	local grace_period=$(echo $show | jq -r ".grace_period")
+	check_err $? "Failed get $name reporter grace_period"
+	[ "$grace_period" == "$expected_grace_period" ]
+	check_err $? "Unexpected \"grace_period\" value (got $grace_period, expected $expected_grace_period)"
+
+	local auto_recover=$(echo $show | jq -r ".auto_recover")
+	[ "$auto_recover" == "$expected_auto_recover" ]
+	check_err $? "Unexpected \"auto_recover\" value (got $auto_recover, expected $expected_auto_recover)"
+}
+
+dummy_reporter_test()
+{
+	RET=0
+
+	check_reporter_info dummy healthy 0 0 0 true
+
+	devlink health set $DL_HANDLE reporter dummy auto_recover false
+	check_err $? "Failed to dummy reporter auto_recover option"
+
+	check_reporter_info dummy healthy 0 0 0 false
+
+	local BREAK_MSG="foo bar"
+	echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health
+	check_err $? "Failed to break dummy reporter"
+
+	check_reporter_info dummy error 1 0 0 false
+
+	local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j)
+	check_err $? "Failed show dump of dummy reporter"
+
+	local dump_break_msg=$(echo $dump | jq -r ".break_message")
+	[ "$dump_break_msg" == "$BREAK_MSG" ]
+	check_err $? "Unexpected dump break message value (got $dump_break_msg, expected $BREAK_MSG)"
+
+	devlink health dump clear $DL_HANDLE reporter dummy
+	check_err $? "Failed clear dump of dummy reporter"
+
+	devlink health recover $DL_HANDLE reporter dummy
+	check_err $? "Failed recover dummy reporter"
+
+	check_reporter_info dummy healthy 1 1 0 false
+
+	devlink health set $DL_HANDLE reporter dummy auto_recover true
+	check_err $? "Failed to dummy reporter auto_recover option"
+
+	check_reporter_info dummy healthy 1 1 0 true
+
+	echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health
+	check_err $? "Failed to break dummy reporter"
+
+	check_reporter_info dummy healthy 2 2 0 true
+
+	local diagnose=$(devlink health diagnose $DL_HANDLE reporter dummy -j -p)
+	check_err $? "Failed show diagnose of dummy reporter"
+
+	local rcvrd_break_msg=$(echo $diagnose | jq -r ".recovered_break_message")
+	[ "$rcvrd_break_msg" == "$BREAK_MSG" ]
+	check_err $? "Unexpected recovered break message value (got $rcvrd_break_msg, expected $BREAK_MSG)"
+
+	devlink health set $DL_HANDLE reporter dummy grace_period 10
+	check_err $? "Failed to dummy reporter grace_period option"
+
+	check_reporter_info dummy healthy 2 2 10 true
+
+	echo "Y"> $DEBUGFS_DIR/health/fail_recover
+	check_err $? "Failed set dummy reporter recovery to fail"
+
+	echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health
+	check_fail $? "Unexpected success of dummy reporter break"
+
+	check_reporter_info dummy error 3 2 10 true
+
+	devlink health recover $DL_HANDLE reporter dummy
+	check_fail $? "Unexpected success of dummy reporter recover"
+
+	echo "N"> $DEBUGFS_DIR/health/fail_recover
+	check_err $? "Failed set dummy reporter recovery to be successful"
+
+	devlink health recover $DL_HANDLE reporter dummy
+	check_err $? "Failed recover dummy reporter"
+
+	check_reporter_info dummy healthy 3 3 10 true
+
+	echo 8192 > $DEBUGFS_DIR/health/binary_len
+	check_err $? "Failed set dummy reporter binary len to 8192"
+
+	local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j)
+	check_err $? "Failed show dump of dummy reporter"
+
+	devlink health dump clear $DL_HANDLE reporter dummy
+	check_err $? "Failed clear dump of dummy reporter"
+
+	log_test "dummy reporter test"
+}
+
+rate_leafs_get()
+{
+	local handle=$1
+
+	cmd_jq "devlink port function rate show -j" \
+	       '.[] | to_entries | .[] | select(.value.type == "leaf") | .key | select(contains("'$handle'"))'
+}
+
+rate_nodes_get()
+{
+	local handle=$1
+
+	cmd_jq "devlink port function rate show -j" \
+		'.[] | to_entries | .[] | select(.value.type == "node") | .key | select(contains("'$handle'"))'
+}
+
+rate_attr_set()
+{
+	local handle=$1
+	local name=$2
+	local value=$3
+	local units=$4
+
+	devlink port function rate set $handle $name $value$units
+}
+
+rate_attr_get()
+{
+	local handle=$1
+	local name=$2
+
+	cmd_jq "devlink port function rate show $handle -j" '.[][].'$name
+}
+
+rate_attr_tx_rate_check()
+{
+	local handle=$1
+	local name=$2
+	local rate=$3
+	local debug_file=$4
+
+	rate_attr_set $handle $name $rate mbit
+	check_err $? "Failed to set $name value"
+
+	local debug_value=$(cat $debug_file)
+	check_err $? "Failed to read $name value from debugfs"
+	[ "$debug_value" == "$rate" ]
+	check_err $? "Unexpected $name debug value $debug_value != $rate"
+
+	local api_value=$(( $(rate_attr_get $handle $name) * 8 / 1000000 ))
+	check_err $? "Failed to get $name attr value"
+	[ "$api_value" == "$rate" ]
+	check_err $? "Unexpected $name attr value $api_value != $rate"
+}
+
+rate_attr_parent_check()
+{
+	local handle=$1
+	local parent=$2
+	local debug_file=$3
+
+	rate_attr_set $handle parent $parent
+	check_err $? "Failed to set parent"
+
+	debug_value=$(cat $debug_file)
+	check_err $? "Failed to get parent debugfs value"
+	[ "$debug_value" == "$parent" ]
+	check_err $? "Unexpected parent debug value $debug_value != $parent"
+
+	api_value=$(rate_attr_get $r_obj parent)
+	check_err $? "Failed to get parent attr value"
+	[ "$api_value" == "$parent" ]
+	check_err $? "Unexpected parent attr value $api_value != $parent"
+}
+
+rate_node_add()
+{
+	local handle=$1
+
+	devlink port function rate add $handle
+}
+
+rate_node_del()
+{
+	local handle=$1
+
+	devlink port function rate del $handle
+}
+
+rate_test()
+{
+	RET=0
+
+	echo $VF_COUNT > /sys/bus/netdevsim/devices/$DEV_NAME/sriov_numvfs
+	devlink dev eswitch set $DL_HANDLE mode switchdev
+	local leafs=`rate_leafs_get $DL_HANDLE`
+	local num_leafs=`echo $leafs | wc -w`
+	[ "$num_leafs" == "$VF_COUNT" ]
+	check_err $? "Expected $VF_COUNT rate leafs but got $num_leafs"
+
+	rate=10
+	for r_obj in $leafs
+	do
+		rate_attr_tx_rate_check $r_obj tx_share $rate \
+			$DEBUGFS_DIR/ports/${r_obj##*/}/tx_share
+		rate=$(($rate+10))
+	done
+
+	rate=100
+	for r_obj in $leafs
+	do
+		rate_attr_tx_rate_check $r_obj tx_max $rate \
+			$DEBUGFS_DIR/ports/${r_obj##*/}/tx_max
+		rate=$(($rate+100))
+	done
+
+	local node1_name='group1'
+	local node1="$DL_HANDLE/$node1_name"
+	rate_node_add "$node1"
+	check_err $? "Failed to add node $node1"
+
+	local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w`
+	[ $num_nodes == 1 ]
+	check_err $? "Expected 1 rate node in output but got $num_nodes"
+
+	local node_tx_share=10
+	rate_attr_tx_rate_check $node1 tx_share $node_tx_share \
+		$DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_share
+
+	local node_tx_max=100
+	rate_attr_tx_rate_check $node1 tx_max $node_tx_max \
+		$DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_max
+
+	rate_node_del "$node1"
+	check_err $? "Failed to delete node $node1"
+	local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w`
+	[ $num_nodes == 0 ]
+	check_err $? "Expected 0 rate node but got $num_nodes"
+
+	local node1_name='group1'
+	local node1="$DL_HANDLE/$node1_name"
+	rate_node_add "$node1"
+	check_err $? "Failed to add node $node1"
+
+	rate_attr_parent_check $r_obj $node1_name \
+		$DEBUGFS_DIR/ports/${r_obj##*/}/rate_parent
+
+	local node2_name='group2'
+	local node2="$DL_HANDLE/$node2_name"
+	rate_node_add "$node2"
+	check_err $? "Failed to add node $node2"
+
+	rate_attr_parent_check $node2 $node1_name \
+		$DEBUGFS_DIR/rate_nodes/$node2_name/rate_parent
+	rate_node_del "$node2"
+	check_err $? "Failed to delete node $node2"
+	rate_attr_set "$r_obj" noparent
+	check_err $? "Failed to unset $r_obj parent node"
+	rate_node_del "$node1"
+	check_err $? "Failed to delete node $node1"
+
+	log_test "rate test"
+}
+
+setup_prepare()
+{
+	modprobe netdevsim
+	echo "$BUS_ADDR $PORT_COUNT" > /sys/bus/netdevsim/new_device
+	while [ ! -d $SYSFS_NET_DIR ] ; do :; done
+}
+
+cleanup()
+{
+	pre_cleanup
+	echo "$BUS_ADDR" > /sys/bus/netdevsim/del_device
+	modprobe -r netdevsim
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink_in_netns.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink_in_netns.sh
new file mode 100755
index 0000000000..7effd35369
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/devlink_in_netns.sh
@@ -0,0 +1,72 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="check_devlink_test check_ports_test"
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+
+BUS_ADDR=10
+PORT_COUNT=4
+DEV_NAME=netdevsim$BUS_ADDR
+SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/
+DL_HANDLE=netdevsim/$DEV_NAME
+NETNS_NAME=testns1
+
+port_netdev_get()
+{
+	local port_index=$1
+
+	cmd_jq "devlink -N $NETNS_NAME port show -j" \
+	       ".[][\"$DL_HANDLE/$port_index\"].netdev" "-e"
+}
+
+check_ports_test()
+{
+	RET=0
+
+	for i in $(seq 0 $(expr $PORT_COUNT - 1)); do
+		netdev_name=$(port_netdev_get $i)
+		check_err $? "Failed to get netdev name for port $DL_HANDLE/$i"
+		ip -n $NETNS_NAME link show $netdev_name &> /dev/null
+		check_err $? "Failed to find netdev $netdev_name"
+	done
+
+	log_test "check ports test"
+}
+
+check_devlink_test()
+{
+	RET=0
+
+	devlink -N $NETNS_NAME dev show $DL_HANDLE &> /dev/null
+	check_err $? "Failed to show devlink instance"
+
+	log_test "check devlink test"
+}
+
+setup_prepare()
+{
+	modprobe netdevsim
+	ip netns add $NETNS_NAME
+	ip netns exec $NETNS_NAME \
+		echo "$BUS_ADDR $PORT_COUNT" > /sys/bus/netdevsim/new_device
+	while [ ! -d $SYSFS_NET_DIR ] ; do :; done
+}
+
+cleanup()
+{
+	pre_cleanup
+	echo "$BUS_ADDR" > /sys/bus/netdevsim/del_device
+	ip netns del $NETNS_NAME
+	modprobe -r netdevsim
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh
new file mode 100755
index 0000000000..b64d98ca0d
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh
@@ -0,0 +1,514 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test is for checking devlink-trap functionality. It makes use of
+# netdevsim which implements the required callbacks.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	init_test
+	trap_action_test
+	trap_metadata_test
+	bad_trap_test
+	bad_trap_action_test
+	trap_stats_test
+	trap_group_action_test
+	bad_trap_group_test
+	trap_group_stats_test
+	trap_policer_test
+	trap_policer_bind_test
+	port_del_test
+	dev_del_test
+"
+NETDEVSIM_PATH=/sys/bus/netdevsim/
+DEV_ADDR=1337
+DEV=netdevsim${DEV_ADDR}
+DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/
+SLEEP_TIME=1
+NETDEV=""
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+
+DEVLINK_DEV=
+source $lib_dir/devlink_lib.sh
+DEVLINK_DEV=netdevsim/${DEV}
+
+require_command udevadm
+
+modprobe netdevsim &> /dev/null
+if [ ! -d "$NETDEVSIM_PATH" ]; then
+	echo "SKIP: No netdevsim support"
+	exit 1
+fi
+
+if [ -d "${NETDEVSIM_PATH}/devices/netdevsim${DEV_ADDR}" ]; then
+	echo "SKIP: Device netdevsim${DEV_ADDR} already exists"
+	exit 1
+fi
+
+check_netdev_down()
+{
+	state=$(cat /sys/class/net/${NETDEV}/flags)
+
+	if [ $((state & 1)) -ne 0 ]; then
+		echo "WARNING: unexpected interface UP, disable NetworkManager?"
+
+		ip link set dev $NETDEV down
+	fi
+}
+
+init_test()
+{
+	RET=0
+
+	test $(devlink_traps_num_get) -ne 0
+	check_err $? "No traps were registered"
+
+	log_test "Initialization"
+}
+
+trap_action_test()
+{
+	local orig_action
+	local trap_name
+	local action
+
+	RET=0
+
+	for trap_name in $(devlink_traps_get); do
+		# The action of non-drop traps cannot be changed.
+		if [ $(devlink_trap_type_get $trap_name) = "drop" ]; then
+			devlink_trap_action_set $trap_name "trap"
+			action=$(devlink_trap_action_get $trap_name)
+			if [ $action != "trap" ]; then
+				check_err 1 "Trap $trap_name did not change action to trap"
+			fi
+
+			devlink_trap_action_set $trap_name "drop"
+			action=$(devlink_trap_action_get $trap_name)
+			if [ $action != "drop" ]; then
+				check_err 1 "Trap $trap_name did not change action to drop"
+			fi
+		else
+			orig_action=$(devlink_trap_action_get $trap_name)
+
+			devlink_trap_action_set $trap_name "trap"
+			action=$(devlink_trap_action_get $trap_name)
+			if [ $action != $orig_action ]; then
+				check_err 1 "Trap $trap_name changed action when should not"
+			fi
+
+			devlink_trap_action_set $trap_name "drop"
+			action=$(devlink_trap_action_get $trap_name)
+			if [ $action != $orig_action ]; then
+				check_err 1 "Trap $trap_name changed action when should not"
+			fi
+		fi
+	done
+
+	log_test "Trap action"
+}
+
+trap_metadata_test()
+{
+	local trap_name
+
+	RET=0
+
+	for trap_name in $(devlink_traps_get); do
+		devlink_trap_metadata_test $trap_name "input_port"
+		check_err $? "Input port not reported as metadata of trap $trap_name"
+		if [ $trap_name == "ingress_flow_action_drop" ] ||
+		   [ $trap_name == "egress_flow_action_drop" ]; then
+			devlink_trap_metadata_test $trap_name "flow_action_cookie"
+			check_err $? "Flow action cookie not reported as metadata of trap $trap_name"
+		fi
+	done
+
+	log_test "Trap metadata"
+}
+
+bad_trap_test()
+{
+	RET=0
+
+	devlink_trap_action_set "made_up_trap" "drop"
+	check_fail $? "Did not get an error for non-existing trap"
+
+	log_test "Non-existing trap"
+}
+
+bad_trap_action_test()
+{
+	local traps_arr
+	local trap_name
+
+	RET=0
+
+	# Pick first trap.
+	traps_arr=($(devlink_traps_get))
+	trap_name=${traps_arr[0]}
+
+	devlink_trap_action_set $trap_name "made_up_action"
+	check_fail $? "Did not get an error for non-existing trap action"
+
+	log_test "Non-existing trap action"
+}
+
+trap_stats_test()
+{
+	local trap_name
+
+	RET=0
+
+	check_netdev_down
+	for trap_name in $(devlink_traps_get); do
+		devlink_trap_stats_idle_test $trap_name
+		check_err $? "Stats of trap $trap_name not idle when netdev down"
+
+		ip link set dev $NETDEV up
+
+		if [ $(devlink_trap_type_get $trap_name) = "drop" ]; then
+			devlink_trap_action_set $trap_name "trap"
+			devlink_trap_stats_idle_test $trap_name
+			check_fail $? "Stats of trap $trap_name idle when action is trap"
+
+			devlink_trap_action_set $trap_name "drop"
+			devlink_trap_stats_idle_test $trap_name
+			check_err $? "Stats of trap $trap_name not idle when action is drop"
+
+			echo "y"> $DEBUGFS_DIR/fail_trap_drop_counter_get
+			devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null
+			check_fail $? "Managed to read trap (hard dropped) statistics when should not"
+			echo "n"> $DEBUGFS_DIR/fail_trap_drop_counter_get
+			devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null
+			check_err $? "Did not manage to read trap (hard dropped) statistics when should"
+
+			devlink_trap_drop_stats_idle_test $trap_name
+			check_fail $? "Drop stats of trap $trap_name idle when should not"
+		else
+			devlink_trap_stats_idle_test $trap_name
+			check_fail $? "Stats of non-drop trap $trap_name idle when should not"
+		fi
+
+		ip link set dev $NETDEV down
+	done
+
+	log_test "Trap statistics"
+}
+
+trap_group_action_test()
+{
+	local curr_group group_name
+	local trap_name
+	local trap_type
+	local action
+
+	RET=0
+
+	for group_name in $(devlink_trap_groups_get); do
+		devlink_trap_group_action_set $group_name "trap"
+
+		for trap_name in $(devlink_traps_get); do
+			curr_group=$(devlink_trap_group_get $trap_name)
+			if [ $curr_group != $group_name ]; then
+				continue
+			fi
+
+			trap_type=$(devlink_trap_type_get $trap_name)
+			if [ $trap_type != "drop" ]; then
+				continue
+			fi
+
+			action=$(devlink_trap_action_get $trap_name)
+			if [ $action != "trap" ]; then
+				check_err 1 "Trap $trap_name did not change action to trap"
+			fi
+		done
+
+		devlink_trap_group_action_set $group_name "drop"
+
+		for trap_name in $(devlink_traps_get); do
+			curr_group=$(devlink_trap_group_get $trap_name)
+			if [ $curr_group != $group_name ]; then
+				continue
+			fi
+
+			trap_type=$(devlink_trap_type_get $trap_name)
+			if [ $trap_type != "drop" ]; then
+				continue
+			fi
+
+			action=$(devlink_trap_action_get $trap_name)
+			if [ $action != "drop" ]; then
+				check_err 1 "Trap $trap_name did not change action to drop"
+			fi
+		done
+	done
+
+	log_test "Trap group action"
+}
+
+bad_trap_group_test()
+{
+	RET=0
+
+	devlink_trap_group_action_set "made_up_trap_group" "drop"
+	check_fail $? "Did not get an error for non-existing trap group"
+
+	log_test "Non-existing trap group"
+}
+
+trap_group_stats_test()
+{
+	local group_name
+
+	RET=0
+
+	check_netdev_down
+	for group_name in $(devlink_trap_groups_get); do
+		devlink_trap_group_stats_idle_test $group_name
+		check_err $? "Stats of trap group $group_name not idle when netdev down"
+
+		ip link set dev $NETDEV up
+
+		devlink_trap_group_action_set $group_name "trap"
+		devlink_trap_group_stats_idle_test $group_name
+		check_fail $? "Stats of trap group $group_name idle when action is trap"
+
+		devlink_trap_group_action_set $group_name "drop"
+		ip link set dev $NETDEV down
+	done
+
+	log_test "Trap group statistics"
+}
+
+trap_policer_test()
+{
+	local packets_t0
+	local packets_t1
+
+	RET=0
+
+	if [ $(devlink_trap_policers_num_get) -eq 0 ]; then
+		check_err 1 "Failed to dump policers"
+	fi
+
+	devlink trap policer set $DEVLINK_DEV policer 1337 &> /dev/null
+	check_fail $? "Did not get an error for setting a non-existing policer"
+	devlink trap policer show $DEVLINK_DEV policer 1337 &> /dev/null
+	check_fail $? "Did not get an error for getting a non-existing policer"
+
+	devlink trap policer set $DEVLINK_DEV policer 1 rate 2000 burst 16
+	check_err $? "Failed to set valid parameters for a valid policer"
+	if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then
+		check_err 1 "Policer rate was not changed"
+	fi
+	if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then
+		check_err 1 "Policer burst size was not changed"
+	fi
+
+	devlink trap policer set $DEVLINK_DEV policer 1 rate 0 &> /dev/null
+	check_fail $? "Policer rate was changed to rate lower than limit"
+	devlink trap policer set $DEVLINK_DEV policer 1 rate 9000 &> /dev/null
+	check_fail $? "Policer rate was changed to rate higher than limit"
+	devlink trap policer set $DEVLINK_DEV policer 1 burst 2 &> /dev/null
+	check_fail $? "Policer burst size was changed to burst size lower than limit"
+	devlink trap policer set $DEVLINK_DEV policer 1 rate 65537 &> /dev/null
+	check_fail $? "Policer burst size was changed to burst size higher than limit"
+	echo "y" > $DEBUGFS_DIR/fail_trap_policer_set
+	devlink trap policer set $DEVLINK_DEV policer 1 rate 3000 &> /dev/null
+	check_fail $? "Managed to set policer rate when should not"
+	echo "n" > $DEBUGFS_DIR/fail_trap_policer_set
+	if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then
+		check_err 1 "Policer rate was changed to an invalid value"
+	fi
+	if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then
+		check_err 1 "Policer burst size was changed to an invalid value"
+	fi
+
+	packets_t0=$(devlink_trap_policer_rx_dropped_get 1)
+	sleep .5
+	packets_t1=$(devlink_trap_policer_rx_dropped_get 1)
+	if [ ! $packets_t1 -gt $packets_t0 ]; then
+		check_err 1 "Policer drop counter was not incremented"
+	fi
+
+	echo "y"> $DEBUGFS_DIR/fail_trap_policer_counter_get
+	devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null
+	check_fail $? "Managed to read policer drop counter when should not"
+	echo "n"> $DEBUGFS_DIR/fail_trap_policer_counter_get
+	devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null
+	check_err $? "Did not manage to read policer drop counter when should"
+
+	log_test "Trap policer"
+}
+
+trap_group_check_policer()
+{
+	local group_name=$1; shift
+
+	devlink -j -p trap group show $DEVLINK_DEV group $group_name \
+		| jq -e '.[][][]["policer"]' &> /dev/null
+}
+
+trap_policer_bind_test()
+{
+	RET=0
+
+	devlink trap group set $DEVLINK_DEV group l2_drops policer 1
+	check_err $? "Failed to bind a valid policer"
+	if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then
+		check_err 1 "Bound policer was not changed"
+	fi
+
+	devlink trap group set $DEVLINK_DEV group l2_drops policer 1337 \
+		&> /dev/null
+	check_fail $? "Did not get an error for binding a non-existing policer"
+	if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then
+		check_err 1 "Bound policer was changed when should not"
+	fi
+
+	devlink trap group set $DEVLINK_DEV group l2_drops policer 0
+	check_err $? "Failed to unbind a policer when using ID 0"
+	trap_group_check_policer "l2_drops"
+	check_fail $? "Trap group has a policer after unbinding with ID 0"
+
+	devlink trap group set $DEVLINK_DEV group l2_drops policer 1
+	check_err $? "Failed to bind a valid policer"
+
+	devlink trap group set $DEVLINK_DEV group l2_drops nopolicer
+	check_err $? "Failed to unbind a policer when using 'nopolicer' keyword"
+	trap_group_check_policer "l2_drops"
+	check_fail $? "Trap group has a policer after unbinding with 'nopolicer' keyword"
+
+	devlink trap group set $DEVLINK_DEV group l2_drops policer 1
+	check_err $? "Failed to bind a valid policer"
+
+	echo "y"> $DEBUGFS_DIR/fail_trap_group_set
+	devlink trap group set $DEVLINK_DEV group l2_drops policer 2 \
+		&> /dev/null
+	check_fail $? "Managed to bind a policer when should not"
+	echo "n"> $DEBUGFS_DIR/fail_trap_group_set
+	devlink trap group set $DEVLINK_DEV group l2_drops policer 2
+	check_err $? "Did not manage to bind a policer when should"
+
+	devlink trap group set $DEVLINK_DEV group l2_drops action drop \
+		policer 1337 &> /dev/null
+	check_fail $? "Did not get an error for partially modified trap group"
+
+	log_test "Trap policer binding"
+}
+
+port_del_test()
+{
+	local group_name
+	local i
+
+	# The test never fails. It is meant to exercise different code paths
+	# and make sure we properly dismantle a port while packets are
+	# in-flight.
+	RET=0
+
+	devlink_traps_enable_all
+
+	for i in $(seq 1 10); do
+		ip link set dev $NETDEV up
+
+		sleep $SLEEP_TIME
+
+		netdevsim_port_destroy
+		netdevsim_port_create
+		udevadm settle
+	done
+
+	devlink_traps_disable_all
+
+	log_test "Port delete"
+}
+
+dev_del_test()
+{
+	local group_name
+	local i
+
+	# The test never fails. It is meant to exercise different code paths
+	# and make sure we properly unregister traps while packets are
+	# in-flight.
+	RET=0
+
+	devlink_traps_enable_all
+
+	for i in $(seq 1 10); do
+		ip link set dev $NETDEV up
+
+		sleep $SLEEP_TIME
+
+		cleanup
+		setup_prepare
+	done
+
+	devlink_traps_disable_all
+
+	log_test "Device delete"
+}
+
+netdevsim_dev_create()
+{
+	echo "$DEV_ADDR 0" > ${NETDEVSIM_PATH}/new_device
+}
+
+netdevsim_dev_destroy()
+{
+	echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device
+}
+
+netdevsim_port_create()
+{
+	echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/new_port
+}
+
+netdevsim_port_destroy()
+{
+	echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/del_port
+}
+
+setup_prepare()
+{
+	local netdev
+
+	netdevsim_dev_create
+
+	if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}" ]; then
+		echo "Failed to create netdevsim device"
+		exit 1
+	fi
+
+	netdevsim_port_create
+
+	if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}/net/" ]; then
+		echo "Failed to create netdevsim port"
+		exit 1
+	fi
+
+	# Wait for udev to rename newly created netdev.
+	udevadm settle
+
+	NETDEV=$(ls ${NETDEVSIM_PATH}/devices/${DEV}/net/)
+}
+
+cleanup()
+{
+	pre_cleanup
+	netdevsim_port_destroy
+	netdevsim_dev_destroy
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh
new file mode 100755
index 0000000000..9adfba8f87
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+source ethtool-common.sh
+
+function get_value {
+    local query="${SETTINGS_MAP[$1]}"
+
+    echo $(ethtool -c $NSIM_NETDEV | \
+        awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[ \t]/, "", $2); print $2}')
+}
+
+function update_current_settings {
+    for key in ${!SETTINGS_MAP[@]}; do
+        CURRENT_SETTINGS[$key]=$(get_value $key)
+    done
+    echo ${CURRENT_SETTINGS[@]}
+}
+
+if ! ethtool -h | grep -q coalesce; then
+    echo "SKIP: No --coalesce support in ethtool"
+    exit 4
+fi
+
+NSIM_NETDEV=$(make_netdev)
+
+set -o pipefail
+
+declare -A SETTINGS_MAP=(
+    ["rx-frames-low"]="rx-frame-low"
+    ["tx-frames-low"]="tx-frame-low"
+    ["rx-frames-high"]="rx-frame-high"
+    ["tx-frames-high"]="tx-frame-high"
+    ["rx-usecs"]="rx-usecs"
+    ["rx-frames"]="rx-frames"
+    ["rx-usecs-irq"]="rx-usecs-irq"
+    ["rx-frames-irq"]="rx-frames-irq"
+    ["tx-usecs"]="tx-usecs"
+    ["tx-frames"]="tx-frames"
+    ["tx-usecs-irq"]="tx-usecs-irq"
+    ["tx-frames-irq"]="tx-frames-irq"
+    ["stats-block-usecs"]="stats-block-usecs"
+    ["pkt-rate-low"]="pkt-rate-low"
+    ["rx-usecs-low"]="rx-usecs-low"
+    ["tx-usecs-low"]="tx-usecs-low"
+    ["pkt-rate-high"]="pkt-rate-high"
+    ["rx-usecs-high"]="rx-usecs-high"
+    ["tx-usecs-high"]="tx-usecs-high"
+    ["sample-interval"]="sample-interval"
+)
+
+declare -A CURRENT_SETTINGS=(
+    ["rx-frames-low"]=""
+    ["tx-frames-low"]=""
+    ["rx-frames-high"]=""
+    ["tx-frames-high"]=""
+    ["rx-usecs"]=""
+    ["rx-frames"]=""
+    ["rx-usecs-irq"]=""
+    ["rx-frames-irq"]=""
+    ["tx-usecs"]=""
+    ["tx-frames"]=""
+    ["tx-usecs-irq"]=""
+    ["tx-frames-irq"]=""
+    ["stats-block-usecs"]=""
+    ["pkt-rate-low"]=""
+    ["rx-usecs-low"]=""
+    ["tx-usecs-low"]=""
+    ["pkt-rate-high"]=""
+    ["rx-usecs-high"]=""
+    ["tx-usecs-high"]=""
+    ["sample-interval"]=""
+)
+
+declare -A EXPECTED_SETTINGS=(
+    ["rx-frames-low"]=""
+    ["tx-frames-low"]=""
+    ["rx-frames-high"]=""
+    ["tx-frames-high"]=""
+    ["rx-usecs"]=""
+    ["rx-frames"]=""
+    ["rx-usecs-irq"]=""
+    ["rx-frames-irq"]=""
+    ["tx-usecs"]=""
+    ["tx-frames"]=""
+    ["tx-usecs-irq"]=""
+    ["tx-frames-irq"]=""
+    ["stats-block-usecs"]=""
+    ["pkt-rate-low"]=""
+    ["rx-usecs-low"]=""
+    ["tx-usecs-low"]=""
+    ["pkt-rate-high"]=""
+    ["rx-usecs-high"]=""
+    ["tx-usecs-high"]=""
+    ["sample-interval"]=""
+)
+
+# populate the expected settings map
+for key in ${!SETTINGS_MAP[@]}; do
+    EXPECTED_SETTINGS[$key]=$(get_value $key)
+done
+
+# test
+for key in ${!SETTINGS_MAP[@]}; do
+    value=$((RANDOM % $((2**32-1))))
+
+    ethtool -C $NSIM_NETDEV "$key" "$value"
+
+    EXPECTED_SETTINGS[$key]="$value"
+    expected=${EXPECTED_SETTINGS[@]}
+    current=$(update_current_settings)
+
+    check $? "$current" "$expected"
+    set +x
+done
+
+# bool settings which ethtool displays on the same line
+ethtool -C $NSIM_NETDEV adaptive-rx on
+s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on  TX: off")
+check $? "$s" ""
+
+ethtool -C $NSIM_NETDEV adaptive-tx on
+s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on  TX: on")
+check $? "$s" ""
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $((num_passes)) checks"
+    exit 0
+else
+    echo "FAILED $num_errors/$((num_errors+num_passes)) checks"
+    exit 1
+fi
diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh
new file mode 100644
index 0000000000..922744059a
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh
@@ -0,0 +1,56 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+NSIM_ID=$((RANDOM % 1024))
+NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID
+NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID/ports/0
+NSIM_NETDEV=
+num_passes=0
+num_errors=0
+
+function cleanup_nsim {
+    if [ -e $NSIM_DEV_SYS ]; then
+	echo $NSIM_ID > /sys/bus/netdevsim/del_device
+    fi
+}
+
+function cleanup {
+    cleanup_nsim
+}
+
+trap cleanup EXIT
+
+function check {
+    local code=$1
+    local str=$2
+    local exp_str=$3
+    local exp_fail=$4
+
+    [ -z "$exp_fail" ] && cop="-ne" || cop="-eq"
+
+    if [ $code $cop 0 ]; then
+	((num_errors++))
+	return
+    fi
+
+    if [ "$str" != "$exp_str"  ]; then
+	echo -e "Expected: '$exp_str', got '$str'"
+	((num_errors++))
+	return
+    fi
+
+    ((num_passes++))
+}
+
+function make_netdev {
+    # Make a netdevsim
+    old_netdevs=$(ls /sys/class/net)
+
+    if ! $(lsmod | grep -q netdevsim); then
+	modprobe netdevsim
+    fi
+
+    echo $NSIM_ID $@ > /sys/bus/netdevsim/new_device
+    # get new device name
+    ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/
+}
diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh
new file mode 100755
index 0000000000..0c56746e9c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh
@@ -0,0 +1,110 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+source ethtool-common.sh
+
+NSIM_NETDEV=$(make_netdev)
+[ a$ETHTOOL == a ] && ETHTOOL=ethtool
+
+set -o pipefail
+
+# netdevsim starts out with None/None
+s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
+check $? "$s" "Configured FEC encodings: None
+Active FEC encoding: None"
+
+# Test Auto
+$ETHTOOL --set-fec $NSIM_NETDEV encoding auto
+check $?
+s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
+check $? "$s" "Configured FEC encodings: Auto
+Active FEC encoding: Off"
+
+# Test case in-sensitivity
+for o in off Off OFF; do
+    $ETHTOOL --set-fec $NSIM_NETDEV encoding $o
+    check $?
+    s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
+    check $? "$s" "Configured FEC encodings: Off
+Active FEC encoding: Off"
+done
+
+for o in BaseR baser BAser; do
+    $ETHTOOL --set-fec $NSIM_NETDEV encoding $o
+    check $?
+    s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
+    check $? "$s" "Configured FEC encodings: BaseR
+Active FEC encoding: BaseR"
+done
+
+for o in llrs rs; do
+    $ETHTOOL --set-fec $NSIM_NETDEV encoding $o
+    check $?
+    s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
+    check $? "$s" "Configured FEC encodings: ${o^^}
+Active FEC encoding: ${o^^}"
+done
+
+# Test mutliple bits
+$ETHTOOL --set-fec $NSIM_NETDEV encoding rs llrs
+check $?
+s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
+check $? "$s" "Configured FEC encodings: RS LLRS
+Active FEC encoding: LLRS"
+
+$ETHTOOL --set-fec $NSIM_NETDEV encoding rs off auto
+check $?
+s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
+check $? "$s" "Configured FEC encodings: Auto Off RS
+Active FEC encoding: RS"
+
+# Make sure other link modes are rejected
+$ETHTOOL --set-fec $NSIM_NETDEV encoding FIBRE 2>/dev/null
+check $? '' '' 1
+
+$ETHTOOL --set-fec $NSIM_NETDEV encoding bla-bla-bla 2>/dev/null
+check $? '' '' 1
+
+# Try JSON
+$ETHTOOL --json --show-fec $NSIM_NETDEV | jq empty >>/dev/null 2>&1
+if [ $? -eq 0 ]; then
+    $ETHTOOL --set-fec $NSIM_NETDEV encoding auto
+    check $?
+
+    s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]')
+    check $? "$s" '"Auto"'
+    s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]')
+    check $? "$s" '"Off"'
+
+    $ETHTOOL --set-fec $NSIM_NETDEV encoding auto RS
+    check $?
+
+    s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]')
+    check $? "$s" '"Auto"
+"RS"'
+    s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]')
+    check $? "$s" '"RS"'
+fi
+
+# Test error injection
+echo 11 > $NSIM_DEV_DFS/ethtool/get_err
+
+$ETHTOOL --show-fec $NSIM_NETDEV >>/dev/null 2>&1
+check $? '' '' 1
+
+echo 0 > $NSIM_DEV_DFS/ethtool/get_err
+echo 11 > $NSIM_DEV_DFS/ethtool/set_err
+
+$ETHTOOL --show-fec $NSIM_NETDEV  >>/dev/null 2>&1
+check $?
+
+$ETHTOOL --set-fec $NSIM_NETDEV encoding RS 2>/dev/null
+check $? '' '' 1
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $((num_passes)) checks"
+    exit 0
+else
+    echo "FAILED $num_errors/$((num_errors+num_passes)) checks"
+    exit 1
+fi
diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh
new file mode 100755
index 0000000000..b4a7abfe54
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh
@@ -0,0 +1,49 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+source ethtool-common.sh
+
+# Bail if ethtool is too old
+if ! ethtool -h | grep include-stat 2>&1 >/dev/null; then
+    echo "SKIP: No --include-statistics support in ethtool"
+    exit 4
+fi
+
+NSIM_NETDEV=$(make_netdev)
+
+set -o pipefail
+
+echo n > $NSIM_DEV_DFS/ethtool/pause/report_stats_tx
+echo n > $NSIM_DEV_DFS/ethtool/pause/report_stats_rx
+
+s=$(ethtool --json -a $NSIM_NETDEV | jq '.[].statistics')
+check $? "$s" "null"
+
+s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics')
+check $? "$s" "{}"
+
+echo y > $NSIM_DEV_DFS/ethtool/pause/report_stats_tx
+
+s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics | length')
+check $? "$s" "1"
+
+s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.tx_pause_frames')
+check $? "$s" "2"
+
+echo y > $NSIM_DEV_DFS/ethtool/pause/report_stats_rx
+
+s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics | length')
+check $? "$s" "2"
+
+s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.rx_pause_frames')
+check $? "$s" "1"
+s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.tx_pause_frames')
+check $? "$s" "2"
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $((num_passes)) checks"
+    exit 0
+else
+    echo "FAILED $num_errors/$((num_errors+num_passes)) checks"
+    exit 1
+fi
diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh
new file mode 100755
index 0000000000..c969559ffa
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh
@@ -0,0 +1,85 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+source ethtool-common.sh
+
+function get_value {
+    local query="${SETTINGS_MAP[$1]}"
+
+    echo $(ethtool -g $NSIM_NETDEV | \
+        tail -n +$CURR_SETT_LINE | \
+        awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[\t ]/, "", $2); print $2}')
+}
+
+function update_current_settings {
+    for key in ${!SETTINGS_MAP[@]}; do
+        CURRENT_SETTINGS[$key]=$(get_value $key)
+    done
+    echo ${CURRENT_SETTINGS[@]}
+}
+
+if ! ethtool -h | grep -q set-ring >/dev/null; then
+    echo "SKIP: No --set-ring support in ethtool"
+    exit 4
+fi
+
+NSIM_NETDEV=$(make_netdev)
+
+set -o pipefail
+
+declare -A SETTINGS_MAP=(
+    ["rx"]="RX"
+    ["rx-mini"]="RX Mini"
+    ["rx-jumbo"]="RX Jumbo"
+    ["tx"]="TX"
+)
+
+declare -A EXPECTED_SETTINGS=(
+    ["rx"]=""
+    ["rx-mini"]=""
+    ["rx-jumbo"]=""
+    ["tx"]=""
+)
+
+declare -A CURRENT_SETTINGS=(
+    ["rx"]=""
+    ["rx-mini"]=""
+    ["rx-jumbo"]=""
+    ["tx"]=""
+)
+
+MAX_VALUE=$((RANDOM % $((2**32-1))))
+RING_MAX_LIST=$(ls $NSIM_DEV_DFS/ethtool/ring/)
+
+for ring_max_entry in $RING_MAX_LIST; do
+    echo $MAX_VALUE > $NSIM_DEV_DFS/ethtool/ring/$ring_max_entry
+done
+
+CURR_SETT_LINE=$(ethtool -g $NSIM_NETDEV | grep -i -m1 -n 'Current hardware settings' | cut -f1 -d:)
+
+# populate the expected settings map
+for key in ${!SETTINGS_MAP[@]}; do
+    EXPECTED_SETTINGS[$key]=$(get_value $key)
+done
+
+# test
+for key in ${!SETTINGS_MAP[@]}; do
+    value=$((RANDOM % $MAX_VALUE))
+
+    ethtool -G $NSIM_NETDEV "$key" "$value"
+
+    EXPECTED_SETTINGS[$key]="$value"
+    expected=${EXPECTED_SETTINGS[@]}
+    current=$(update_current_settings)
+
+    check $? "$current" "$expected"
+    set +x
+done
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $((num_passes)) checks"
+    exit 0
+else
+    echo "FAILED $num_errors/$((num_errors+num_passes)) checks"
+    exit 1
+fi
diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib.sh b/tools/testing/selftests/drivers/net/netdevsim/fib.sh
new file mode 100755
index 0000000000..6800de816e
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/fib.sh
@@ -0,0 +1,402 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test is for checking the FIB offload API. It makes use of netdevsim
+# which registers a listener to the FIB notification chain.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	ipv4_identical_routes
+	ipv4_tos
+	ipv4_metric
+	ipv4_replace
+	ipv4_delete
+	ipv4_plen
+	ipv4_replay
+	ipv4_flush
+	ipv4_error_path
+	ipv4_delete_fail
+	ipv6_add
+	ipv6_metric
+	ipv6_append_single
+	ipv6_replace_single
+	ipv6_metric_multipath
+	ipv6_append_multipath
+	ipv6_replace_multipath
+	ipv6_append_multipath_to_single
+	ipv6_delete_single
+	ipv6_delete_multipath
+	ipv6_replay_single
+	ipv6_replay_multipath
+	ipv6_error_path
+	ipv6_delete_fail
+"
+NETDEVSIM_PATH=/sys/bus/netdevsim/
+DEV_ADDR=1337
+DEV=netdevsim${DEV_ADDR}
+SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/
+DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+source $lib_dir/fib_offload_lib.sh
+
+DEVLINK_DEV=
+source $lib_dir/devlink_lib.sh
+DEVLINK_DEV=netdevsim/${DEV}
+
+ipv4_identical_routes()
+{
+	fib_ipv4_identical_routes_test "testns1"
+}
+
+ipv4_tos()
+{
+	fib_ipv4_tos_test "testns1"
+}
+
+ipv4_metric()
+{
+	fib_ipv4_metric_test "testns1"
+}
+
+ipv4_replace()
+{
+	fib_ipv4_replace_test "testns1"
+}
+
+ipv4_delete()
+{
+	fib_ipv4_delete_test "testns1"
+}
+
+ipv4_plen()
+{
+	fib_ipv4_plen_test "testns1"
+}
+
+ipv4_replay_metric()
+{
+	fib_ipv4_replay_metric_test "testns1" "$DEVLINK_DEV"
+}
+
+ipv4_replay_tos()
+{
+	fib_ipv4_replay_tos_test "testns1" "$DEVLINK_DEV"
+}
+
+ipv4_replay_plen()
+{
+	fib_ipv4_replay_plen_test "testns1" "$DEVLINK_DEV"
+}
+
+ipv4_replay()
+{
+	ipv4_replay_metric
+	ipv4_replay_tos
+	ipv4_replay_plen
+}
+
+ipv4_flush()
+{
+	fib_ipv4_flush_test "testns1"
+}
+
+ipv4_error_path_add()
+{
+	local lsb
+
+	RET=0
+
+	ip -n testns1 link add name dummy1 type dummy
+	ip -n testns1 link set dev dummy1 up
+
+	devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 10
+	devlink -N testns1 dev reload $DEVLINK_DEV
+
+	for lsb in $(seq 1 20); do
+		ip -n testns1 route add 192.0.2.${lsb}/32 dev dummy1 \
+			&> /dev/null
+	done
+
+	log_test "IPv4 error path - add"
+
+	ip -n testns1 link del dev dummy1
+}
+
+ipv4_error_path_replay()
+{
+	local lsb
+
+	RET=0
+
+	ip -n testns1 link add name dummy1 type dummy
+	ip -n testns1 link set dev dummy1 up
+
+	devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 100
+	devlink -N testns1 dev reload $DEVLINK_DEV
+
+	for lsb in $(seq 1 20); do
+		ip -n testns1 route add 192.0.2.${lsb}/32 dev dummy1
+	done
+
+	devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 10
+	devlink -N testns1 dev reload $DEVLINK_DEV &> /dev/null
+
+	log_test "IPv4 error path - replay"
+
+	ip -n testns1 link del dev dummy1
+
+	# Successfully reload after deleting all the routes.
+	devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 100
+	devlink -N testns1 dev reload $DEVLINK_DEV
+}
+
+ipv4_error_path()
+{
+	# Test the different error paths of the notifiers by limiting the size
+	# of the "IPv4/fib" resource.
+	ipv4_error_path_add
+	ipv4_error_path_replay
+}
+
+ipv4_delete_fail()
+{
+	RET=0
+
+	echo "y" > $DEBUGFS_DIR/fib/fail_route_delete
+
+	ip -n testns1 link add name dummy1 type dummy
+	ip -n testns1 link set dev dummy1 up
+
+	ip -n testns1 route add 192.0.2.0/24 dev dummy1
+	ip -n testns1 route del 192.0.2.0/24 dev dummy1 &> /dev/null
+
+	# We should not be able to delete the netdev if we are leaking a
+	# reference.
+	ip -n testns1 link del dev dummy1
+
+	log_test "IPv4 route delete failure"
+
+	echo "n" > $DEBUGFS_DIR/fib/fail_route_delete
+}
+
+ipv6_add()
+{
+	fib_ipv6_add_test "testns1"
+}
+
+ipv6_metric()
+{
+	fib_ipv6_metric_test "testns1"
+}
+
+ipv6_append_single()
+{
+	fib_ipv6_append_single_test "testns1"
+}
+
+ipv6_replace_single()
+{
+	fib_ipv6_replace_single_test "testns1"
+}
+
+ipv6_metric_multipath()
+{
+	fib_ipv6_metric_multipath_test "testns1"
+}
+
+ipv6_append_multipath()
+{
+	fib_ipv6_append_multipath_test "testns1"
+}
+
+ipv6_replace_multipath()
+{
+	fib_ipv6_replace_multipath_test "testns1"
+}
+
+ipv6_append_multipath_to_single()
+{
+	fib_ipv6_append_multipath_to_single_test "testns1"
+}
+
+ipv6_delete_single()
+{
+	fib_ipv6_delete_single_test "testns1"
+}
+
+ipv6_delete_multipath()
+{
+	fib_ipv6_delete_multipath_test "testns1"
+}
+
+ipv6_replay_single()
+{
+	fib_ipv6_replay_single_test "testns1" "$DEVLINK_DEV"
+}
+
+ipv6_replay_multipath()
+{
+	fib_ipv6_replay_multipath_test "testns1" "$DEVLINK_DEV"
+}
+
+ipv6_error_path_add_single()
+{
+	local lsb
+
+	RET=0
+
+	ip -n testns1 link add name dummy1 type dummy
+	ip -n testns1 link set dev dummy1 up
+
+	devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 10
+	devlink -N testns1 dev reload $DEVLINK_DEV
+
+	for lsb in $(seq 1 20); do
+		ip -n testns1 route add 2001:db8:1::${lsb}/128 dev dummy1 \
+			&> /dev/null
+	done
+
+	log_test "IPv6 error path - add single"
+
+	ip -n testns1 link del dev dummy1
+}
+
+ipv6_error_path_add_multipath()
+{
+	local lsb
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n testns1 link add name dummy$i type dummy
+		ip -n testns1 link set dev dummy$i up
+		ip -n testns1 address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 10
+	devlink -N testns1 dev reload $DEVLINK_DEV
+
+	for lsb in $(seq 1 20); do
+		ip -n testns1 route add 2001:db8:10::${lsb}/128 \
+			nexthop via 2001:db8:1::2 dev dummy1 \
+			nexthop via 2001:db8:2::2 dev dummy2 &> /dev/null
+	done
+
+	log_test "IPv6 error path - add multipath"
+
+	for i in $(seq 1 2); do
+		ip -n testns1 link del dev dummy$i
+	done
+}
+
+ipv6_error_path_replay()
+{
+	local lsb
+
+	RET=0
+
+	ip -n testns1 link add name dummy1 type dummy
+	ip -n testns1 link set dev dummy1 up
+
+	devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 100
+	devlink -N testns1 dev reload $DEVLINK_DEV
+
+	for lsb in $(seq 1 20); do
+		ip -n testns1 route add 2001:db8:1::${lsb}/128 dev dummy1
+	done
+
+	devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 10
+	devlink -N testns1 dev reload $DEVLINK_DEV &> /dev/null
+
+	log_test "IPv6 error path - replay"
+
+	ip -n testns1 link del dev dummy1
+
+	# Successfully reload after deleting all the routes.
+	devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 100
+	devlink -N testns1 dev reload $DEVLINK_DEV
+}
+
+ipv6_error_path()
+{
+	# Test the different error paths of the notifiers by limiting the size
+	# of the "IPv6/fib" resource.
+	ipv6_error_path_add_single
+	ipv6_error_path_add_multipath
+	ipv6_error_path_replay
+}
+
+ipv6_delete_fail()
+{
+	RET=0
+
+	echo "y" > $DEBUGFS_DIR/fib/fail_route_delete
+
+	ip -n testns1 link add name dummy1 type dummy
+	ip -n testns1 link set dev dummy1 up
+
+	ip -n testns1 route add 2001:db8:1::/64 dev dummy1
+	ip -n testns1 route del 2001:db8:1::/64 dev dummy1 &> /dev/null
+
+	# We should not be able to delete the netdev if we are leaking a
+	# reference.
+	ip -n testns1 link del dev dummy1
+
+	log_test "IPv6 route delete failure"
+
+	echo "n" > $DEBUGFS_DIR/fib/fail_route_delete
+}
+
+fib_notify_on_flag_change_set()
+{
+	local notify=$1; shift
+
+	ip netns exec testns1 sysctl -qw net.ipv4.fib_notify_on_flag_change=$notify
+	ip netns exec testns1 sysctl -qw net.ipv6.fib_notify_on_flag_change=$notify
+
+	log_info "Set fib_notify_on_flag_change to $notify"
+}
+
+setup_prepare()
+{
+	local netdev
+
+	modprobe netdevsim &> /dev/null
+
+	echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device
+	while [ ! -d $SYSFS_NET_DIR ] ; do :; done
+
+	ip netns add testns1
+	if [ $? -ne 0 ]; then
+		echo "Failed to add netns \"testns1\""
+		exit 1
+	fi
+
+	devlink dev reload $DEVLINK_DEV netns testns1
+	if [ $? -ne 0 ]; then
+		echo "Failed to reload into netns \"testns1\""
+		exit 1
+	fi
+}
+
+cleanup()
+{
+	pre_cleanup
+	ip netns del testns1
+	echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device
+	modprobe -r netdevsim &> /dev/null
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+fib_notify_on_flag_change_set 1
+tests_run
+
+fib_notify_on_flag_change_set 0
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh
new file mode 100755
index 0000000000..8d91191a09
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh
@@ -0,0 +1,430 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	ipv4_route_addition_test
+	ipv4_route_deletion_test
+	ipv4_route_replacement_test
+	ipv4_route_offload_failed_test
+	ipv6_route_addition_test
+	ipv6_route_deletion_test
+	ipv6_route_replacement_test
+	ipv6_route_offload_failed_test
+"
+
+NETDEVSIM_PATH=/sys/bus/netdevsim/
+DEV_ADDR=1337
+DEV=netdevsim${DEV_ADDR}
+DEVLINK_DEV=netdevsim/${DEV}
+SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/
+DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+
+check_rt_offload_failed()
+{
+	local outfile=$1; shift
+	local line
+
+	# Make sure that the first notification was emitted without
+	# RTM_F_OFFLOAD_FAILED flag and the second with RTM_F_OFFLOAD_FAILED
+	# flag
+	head -n 1 $outfile | grep -q "rt_offload_failed"
+	if [[ $? -eq 0 ]]; then
+		return 1
+	fi
+
+	head -n 2 $outfile | tail -n 1 | grep -q "rt_offload_failed"
+}
+
+check_rt_trap()
+{
+	local outfile=$1; shift
+	local line
+
+	# Make sure that the first notification was emitted without RTM_F_TRAP
+	# flag and the second with RTM_F_TRAP flag
+	head -n 1 $outfile | grep -q "rt_trap"
+	if [[ $? -eq 0 ]]; then
+		return 1
+	fi
+
+	head -n 2 $outfile | tail -n 1 | grep -q "rt_trap"
+}
+
+route_notify_check()
+{
+	local outfile=$1; shift
+	local expected_num_lines=$1; shift
+	local offload_failed=${1:-0}; shift
+
+	# check the monitor results
+	lines=`wc -l $outfile | cut "-d " -f1`
+	test $lines -eq $expected_num_lines
+	check_err $? "$expected_num_lines notifications were expected but $lines were received"
+
+	if [[ $expected_num_lines -eq 1 ]]; then
+		return
+	fi
+
+	if [[ $offload_failed -eq 0 ]]; then
+		check_rt_trap $outfile
+		check_err $? "Wrong RTM_F_TRAP flags in notifications"
+	else
+		check_rt_offload_failed $outfile
+		check_err $? "Wrong RTM_F_OFFLOAD_FAILED flags in notifications"
+	fi
+}
+
+route_addition_check()
+{
+	local ip=$1; shift
+	local notify=$1; shift
+	local route=$1; shift
+	local expected_num_notifications=$1; shift
+	local offload_failed=${1:-0}; shift
+
+	ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify
+
+	local outfile=$(mktemp)
+
+	$IP monitor route &> $outfile &
+	sleep 1
+	$IP route add $route dev dummy1
+	sleep 1
+	kill %% && wait %% &> /dev/null
+
+	route_notify_check $outfile $expected_num_notifications $offload_failed
+	rm -f $outfile
+
+	$IP route del $route dev dummy1
+}
+
+ipv4_route_addition_test()
+{
+	RET=0
+
+	local ip="ipv4"
+	local route=192.0.2.0/24
+
+	# Make sure a single notification will be emitted for the programmed
+	# route.
+	local notify=0
+	local expected_num_notifications=1
+	# route_addition_check will assign value to RET.
+	route_addition_check $ip $notify $route $expected_num_notifications
+
+	# Make sure two notifications will be emitted for the programmed route.
+	notify=1
+	expected_num_notifications=2
+	route_addition_check $ip $notify $route $expected_num_notifications
+
+	# notify=2 means emit notifications only for failed route installation,
+	# make sure a single notification will be emitted for the programmed
+	# route.
+	notify=2
+	expected_num_notifications=1
+	route_addition_check $ip $notify $route $expected_num_notifications
+
+	log_test "IPv4 route addition"
+}
+
+route_deletion_check()
+{
+	local ip=$1; shift
+	local notify=$1; shift
+	local route=$1; shift
+	local expected_num_notifications=$1; shift
+
+	ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify
+	$IP route add $route dev dummy1
+	sleep 1
+
+	local outfile=$(mktemp)
+
+	$IP monitor route &> $outfile &
+	sleep 1
+	$IP route del $route dev dummy1
+	sleep 1
+	kill %% && wait %% &> /dev/null
+
+	route_notify_check $outfile $expected_num_notifications
+	rm -f $outfile
+}
+
+ipv4_route_deletion_test()
+{
+	RET=0
+
+	local ip="ipv4"
+	local route=192.0.2.0/24
+	local expected_num_notifications=1
+
+	# Make sure a single notification will be emitted for the deleted route,
+	# regardless of fib_notify_on_flag_change value.
+	local notify=0
+	# route_deletion_check will assign value to RET.
+	route_deletion_check $ip $notify $route $expected_num_notifications
+
+	notify=1
+	route_deletion_check $ip $notify $route $expected_num_notifications
+
+	log_test "IPv4 route deletion"
+}
+
+route_replacement_check()
+{
+	local ip=$1; shift
+	local notify=$1; shift
+	local route=$1; shift
+	local expected_num_notifications=$1; shift
+
+	ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify
+	$IP route add $route dev dummy1
+	sleep 1
+
+	local outfile=$(mktemp)
+
+	$IP monitor route &> $outfile &
+	sleep 1
+	$IP route replace $route dev dummy2
+	sleep 1
+	kill %% && wait %% &> /dev/null
+
+	route_notify_check $outfile $expected_num_notifications
+	rm -f $outfile
+
+	$IP route del $route dev dummy2
+}
+
+ipv4_route_replacement_test()
+{
+	RET=0
+
+	local ip="ipv4"
+	local route=192.0.2.0/24
+
+	$IP link add name dummy2 type dummy
+	$IP link set dev dummy2 up
+
+	# Make sure a single notification will be emitted for the new route.
+	local notify=0
+	local expected_num_notifications=1
+	# route_replacement_check will assign value to RET.
+	route_replacement_check $ip $notify $route $expected_num_notifications
+
+	# Make sure two notifications will be emitted for the new route.
+	notify=1
+	expected_num_notifications=2
+	route_replacement_check $ip $notify $route $expected_num_notifications
+
+	# notify=2 means emit notifications only for failed route installation,
+	# make sure a single notification will be emitted for the new route.
+	notify=2
+	expected_num_notifications=1
+	route_replacement_check $ip $notify $route $expected_num_notifications
+
+	$IP link del name dummy2
+
+	log_test "IPv4 route replacement"
+}
+
+ipv4_route_offload_failed_test()
+{
+
+	RET=0
+
+	local ip="ipv4"
+	local route=192.0.2.0/24
+	local offload_failed=1
+
+	echo "y"> $DEBUGFS_DIR/fib/fail_route_offload
+	check_err $? "Failed to setup route offload to fail"
+
+	# Make sure a single notification will be emitted for the programmed
+	# route.
+	local notify=0
+	local expected_num_notifications=1
+	route_addition_check $ip $notify $route $expected_num_notifications \
+		$offload_failed
+
+	# Make sure two notifications will be emitted for the new route.
+	notify=1
+	expected_num_notifications=2
+	route_addition_check $ip $notify $route $expected_num_notifications \
+		$offload_failed
+
+	# notify=2 means emit notifications only for failed route installation,
+	# make sure two notifications will be emitted for the new route.
+	notify=2
+	expected_num_notifications=2
+	route_addition_check $ip $notify $route $expected_num_notifications \
+		$offload_failed
+
+	echo "n"> $DEBUGFS_DIR/fib/fail_route_offload
+	check_err $? "Failed to setup route offload not to fail"
+
+	log_test "IPv4 route offload failed"
+}
+
+ipv6_route_addition_test()
+{
+	RET=0
+
+	local ip="ipv6"
+	local route=2001:db8:1::/64
+
+	# Make sure a single notification will be emitted for the programmed
+	# route.
+	local notify=0
+	local expected_num_notifications=1
+	route_addition_check $ip $notify $route $expected_num_notifications
+
+	# Make sure two notifications will be emitted for the programmed route.
+	notify=1
+	expected_num_notifications=2
+	route_addition_check $ip $notify $route $expected_num_notifications
+
+	# notify=2 means emit notifications only for failed route installation,
+	# make sure a single notification will be emitted for the programmed
+	# route.
+	notify=2
+	expected_num_notifications=1
+	route_addition_check $ip $notify $route $expected_num_notifications
+
+	log_test "IPv6 route addition"
+}
+
+ipv6_route_deletion_test()
+{
+	RET=0
+
+	local ip="ipv6"
+	local route=2001:db8:1::/64
+	local expected_num_notifications=1
+
+	# Make sure a single notification will be emitted for the deleted route,
+	# regardless of fib_notify_on_flag_change value.
+	local notify=0
+	route_deletion_check $ip $notify $route $expected_num_notifications
+
+	notify=1
+	route_deletion_check $ip $notify $route $expected_num_notifications
+
+	log_test "IPv6 route deletion"
+}
+
+ipv6_route_replacement_test()
+{
+	RET=0
+
+	local ip="ipv6"
+	local route=2001:db8:1::/64
+
+	$IP link add name dummy2 type dummy
+	$IP link set dev dummy2 up
+
+	# Make sure a single notification will be emitted for the new route.
+	local notify=0
+	local expected_num_notifications=1
+	route_replacement_check $ip $notify $route $expected_num_notifications
+
+	# Make sure two notifications will be emitted for the new route.
+	notify=1
+	expected_num_notifications=2
+	route_replacement_check $ip $notify $route $expected_num_notifications
+
+	# notify=2 means emit notifications only for failed route installation,
+	# make sure a single notification will be emitted for the new route.
+	notify=2
+	expected_num_notifications=1
+	route_replacement_check $ip $notify $route $expected_num_notifications
+
+	$IP link del name dummy2
+
+	log_test "IPv6 route replacement"
+}
+
+ipv6_route_offload_failed_test()
+{
+
+	RET=0
+
+	local ip="ipv6"
+	local route=2001:db8:1::/64
+	local offload_failed=1
+
+	echo "y"> $DEBUGFS_DIR/fib/fail_route_offload
+	check_err $? "Failed to setup route offload to fail"
+
+	# Make sure a single notification will be emitted for the programmed
+	# route.
+	local notify=0
+	local expected_num_notifications=1
+	route_addition_check $ip $notify $route $expected_num_notifications \
+		$offload_failed
+
+	# Make sure two notifications will be emitted for the new route.
+	notify=1
+	expected_num_notifications=2
+	route_addition_check $ip $notify $route $expected_num_notifications \
+		$offload_failed
+
+	# notify=2 means emit notifications only for failed route installation,
+	# make sure two notifications will be emitted for the new route.
+	notify=2
+	expected_num_notifications=2
+	route_addition_check $ip $notify $route $expected_num_notifications \
+		$offload_failed
+
+	echo "n"> $DEBUGFS_DIR/fib/fail_route_offload
+	check_err $? "Failed to setup route offload not to fail"
+
+	log_test "IPv6 route offload failed"
+}
+
+setup_prepare()
+{
+	modprobe netdevsim &> /dev/null
+	echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device
+	while [ ! -d $SYSFS_NET_DIR ] ; do :; done
+
+	ip netns add testns1
+
+	if [ $? -ne 0 ]; then
+		echo "Failed to add netns \"testns1\""
+		exit 1
+	fi
+
+	devlink dev reload $DEVLINK_DEV netns testns1
+
+	if [ $? -ne 0 ]; then
+		echo "Failed to reload into netns \"testns1\""
+		exit 1
+	fi
+
+	IP="ip -n testns1"
+
+	$IP link add name dummy1 type dummy
+	$IP link set dev dummy1 up
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	$IP link del name dummy1
+	ip netns del testns1
+	echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device
+	modprobe -r netdevsim &> /dev/null
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh
new file mode 100755
index 0000000000..cba5ac0842
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh
@@ -0,0 +1,421 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	l3_reporting_test
+	l3_fail_next_test
+	l3_counter_test
+	l3_rollback_test
+	l3_monitor_test
+"
+
+NETDEVSIM_PATH=/sys/bus/netdevsim/
+DEV_ADDR_1=1337
+DEV_ADDR_2=1057
+DEV_ADDR_3=5417
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+
+DUMMY_IFINDEX=
+
+DEV_ADDR()
+{
+	local n=$1; shift
+	local var=DEV_ADDR_$n
+
+	echo ${!var}
+}
+
+DEV()
+{
+	echo netdevsim$(DEV_ADDR $1)
+}
+
+DEVLINK_DEV()
+{
+	echo netdevsim/$(DEV $1)
+}
+
+SYSFS_NET_DIR()
+{
+	echo /sys/bus/netdevsim/devices/$(DEV $1)/net/
+}
+
+DEBUGFS_DIR()
+{
+	echo /sys/kernel/debug/netdevsim/$(DEV $1)/
+}
+
+nsim_add()
+{
+	local n=$1; shift
+
+	echo "$(DEV_ADDR $n) 1" > ${NETDEVSIM_PATH}/new_device
+	while [ ! -d $(SYSFS_NET_DIR $n) ] ; do :; done
+}
+
+nsim_reload()
+{
+	local n=$1; shift
+	local ns=$1; shift
+
+	devlink dev reload $(DEVLINK_DEV $n) netns $ns
+
+	if [ $? -ne 0 ]; then
+		echo "Failed to reload $(DEV $n) into netns \"testns1\""
+		exit 1
+	fi
+
+}
+
+nsim_del()
+{
+	local n=$1; shift
+
+	echo "$(DEV_ADDR $n)" > ${NETDEVSIM_PATH}/del_device
+}
+
+nsim_hwstats_toggle()
+{
+	local action=$1; shift
+	local instance=$1; shift
+	local netdev=$1; shift
+	local type=$1; shift
+
+	local ifindex=$($IP -j link show dev $netdev | jq '.[].ifindex')
+
+	echo $ifindex > $(DEBUGFS_DIR $instance)/hwstats/$type/$action
+}
+
+nsim_hwstats_enable()
+{
+	nsim_hwstats_toggle enable_ifindex "$@"
+}
+
+nsim_hwstats_disable()
+{
+	nsim_hwstats_toggle disable_ifindex "$@"
+}
+
+nsim_hwstats_fail_next_enable()
+{
+	nsim_hwstats_toggle fail_next_enable "$@"
+}
+
+setup_prepare()
+{
+	modprobe netdevsim &> /dev/null
+	nsim_add 1
+	nsim_add 2
+	nsim_add 3
+
+	ip netns add testns1
+
+	if [ $? -ne 0 ]; then
+		echo "Failed to add netns \"testns1\""
+		exit 1
+	fi
+
+	nsim_reload 1 testns1
+	nsim_reload 2 testns1
+	nsim_reload 3 testns1
+
+	IP="ip -n testns1"
+
+	$IP link add name dummy1 type dummy
+	$IP link set dev dummy1 up
+	DUMMY_IFINDEX=$($IP -j link show dev dummy1 | jq '.[].ifindex')
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	$IP link del name dummy1
+	ip netns del testns1
+	nsim_del 3
+	nsim_del 2
+	nsim_del 1
+	modprobe -r netdevsim &> /dev/null
+}
+
+netdev_hwstats_used()
+{
+	local netdev=$1; shift
+	local type=$1; shift
+
+	$IP -j stats show dev "$netdev" group offload subgroup hw_stats_info |
+	    jq '.[].info.l3_stats.used'
+}
+
+netdev_check_used()
+{
+	local netdev=$1; shift
+	local type=$1; shift
+
+	[[ $(netdev_hwstats_used $netdev $type) == "true" ]]
+}
+
+netdev_check_unused()
+{
+	local netdev=$1; shift
+	local type=$1; shift
+
+	[[ $(netdev_hwstats_used $netdev $type) == "false" ]]
+}
+
+netdev_hwstats_request()
+{
+	local netdev=$1; shift
+	local type=$1; shift
+
+	$IP -j stats show dev "$netdev" group offload subgroup hw_stats_info |
+	    jq ".[].info.${type}_stats.request"
+}
+
+netdev_check_requested()
+{
+	local netdev=$1; shift
+	local type=$1; shift
+
+	[[ $(netdev_hwstats_request $netdev $type) == "true" ]]
+}
+
+netdev_check_unrequested()
+{
+	local netdev=$1; shift
+	local type=$1; shift
+
+	[[ $(netdev_hwstats_request $netdev $type) == "false" ]]
+}
+
+reporting_test()
+{
+	local type=$1; shift
+	local instance=1
+
+	RET=0
+
+	[[ -n $(netdev_hwstats_used dummy1 $type) ]]
+	check_err $? "$type stats not reported"
+
+	netdev_check_unused dummy1 $type
+	check_err $? "$type stats reported as used before either device or netdevsim request"
+
+	nsim_hwstats_enable $instance dummy1 $type
+	netdev_check_unused dummy1 $type
+	check_err $? "$type stats reported as used before device request"
+	netdev_check_unrequested dummy1 $type
+	check_err $? "$type stats reported as requested before device request"
+
+	$IP stats set dev dummy1 ${type}_stats on
+	netdev_check_used dummy1 $type
+	check_err $? "$type stats reported as not used after both device and netdevsim request"
+	netdev_check_requested dummy1 $type
+	check_err $? "$type stats reported as not requested after device request"
+
+	nsim_hwstats_disable $instance dummy1 $type
+	netdev_check_unused dummy1 $type
+	check_err $? "$type stats reported as used after netdevsim request withdrawn"
+
+	nsim_hwstats_enable $instance dummy1 $type
+	netdev_check_used dummy1 $type
+	check_err $? "$type stats reported as not used after netdevsim request reenabled"
+
+	$IP stats set dev dummy1 ${type}_stats off
+	netdev_check_unused dummy1 $type
+	check_err $? "$type stats reported as used after device request withdrawn"
+	netdev_check_unrequested dummy1 $type
+	check_err $? "$type stats reported as requested after device request withdrawn"
+
+	nsim_hwstats_disable $instance dummy1 $type
+	netdev_check_unused dummy1 $type
+	check_err $? "$type stats reported as used after both requests withdrawn"
+
+	log_test "Reporting of $type stats usage"
+}
+
+l3_reporting_test()
+{
+	reporting_test l3
+}
+
+__fail_next_test()
+{
+	local instance=$1; shift
+	local type=$1; shift
+
+	RET=0
+
+	netdev_check_unused dummy1 $type
+	check_err $? "$type stats reported as used before either device or netdevsim request"
+
+	nsim_hwstats_enable $instance dummy1 $type
+	nsim_hwstats_fail_next_enable $instance dummy1 $type
+	netdev_check_unused dummy1 $type
+	check_err $? "$type stats reported as used before device request"
+	netdev_check_unrequested dummy1 $type
+	check_err $? "$type stats reported as requested before device request"
+
+	$IP stats set dev dummy1 ${type}_stats on 2>/dev/null
+	check_fail $? "$type stats request not bounced as it should have been"
+	netdev_check_unused dummy1 $type
+	check_err $? "$type stats reported as used after bounce"
+	netdev_check_unrequested dummy1 $type
+	check_err $? "$type stats reported as requested after bounce"
+
+	$IP stats set dev dummy1 ${type}_stats on
+	check_err $? "$type stats request failed when it shouldn't have"
+	netdev_check_used dummy1 $type
+	check_err $? "$type stats reported as not used after both device and netdevsim request"
+	netdev_check_requested dummy1 $type
+	check_err $? "$type stats reported as not requested after device request"
+
+	$IP stats set dev dummy1 ${type}_stats off
+	nsim_hwstats_disable $instance dummy1 $type
+
+	log_test "Injected failure of $type stats enablement (netdevsim #$instance)"
+}
+
+fail_next_test()
+{
+	__fail_next_test 1 "$@"
+	__fail_next_test 2 "$@"
+	__fail_next_test 3 "$@"
+}
+
+l3_fail_next_test()
+{
+	fail_next_test l3
+}
+
+get_hwstat()
+{
+	local netdev=$1; shift
+	local type=$1; shift
+	local selector=$1; shift
+
+	$IP -j stats show dev $netdev group offload subgroup ${type}_stats |
+		  jq ".[0].stats64.${selector}"
+}
+
+counter_test()
+{
+	local type=$1; shift
+	local instance=1
+
+	RET=0
+
+	nsim_hwstats_enable $instance dummy1 $type
+	$IP stats set dev dummy1 ${type}_stats on
+	netdev_check_used dummy1 $type
+	check_err $? "$type stats reported as not used after both device and netdevsim request"
+
+	# Netdevsim counts 10pps on ingress. We should see maybe a couple
+	# packets, unless things take a reeealy long time.
+	local pkts=$(get_hwstat dummy1 l3 rx.packets)
+	((pkts < 10))
+	check_err $? "$type stats show >= 10 packets after first enablement"
+
+	sleep 2.5
+
+	local pkts=$(get_hwstat dummy1 l3 rx.packets)
+	((pkts >= 20))
+	check_err $? "$type stats show < 20 packets after 2.5s passed"
+
+	$IP stats set dev dummy1 ${type}_stats off
+
+	sleep 2
+
+	$IP stats set dev dummy1 ${type}_stats on
+	local pkts=$(get_hwstat dummy1 l3 rx.packets)
+	((pkts < 10))
+	check_err $? "$type stats show >= 10 packets after second enablement"
+
+	$IP stats set dev dummy1 ${type}_stats off
+	nsim_hwstats_fail_next_enable $instance dummy1 $type
+	$IP stats set dev dummy1 ${type}_stats on 2>/dev/null
+	check_fail $? "$type stats request not bounced as it should have been"
+
+	sleep 2
+
+	$IP stats set dev dummy1 ${type}_stats on
+	local pkts=$(get_hwstat dummy1 l3 rx.packets)
+	((pkts < 10))
+	check_err $? "$type stats show >= 10 packets after post-fail enablement"
+
+	$IP stats set dev dummy1 ${type}_stats off
+
+	log_test "Counter values in $type stats"
+}
+
+l3_counter_test()
+{
+	counter_test l3
+}
+
+rollback_test()
+{
+	local type=$1; shift
+
+	RET=0
+
+	nsim_hwstats_enable 1 dummy1 l3
+	nsim_hwstats_enable 2 dummy1 l3
+	nsim_hwstats_enable 3 dummy1 l3
+
+	# The three netdevsim instances are registered in order of their number
+	# one after another. It is reasonable to expect that whatever
+	# notifications take place hit no. 2 in between hitting nos. 1 and 3,
+	# whatever the actual order. This allows us to test that a fail caused
+	# by no. 2 does not leave the system in a partial state, and rolls
+	# everything back.
+
+	nsim_hwstats_fail_next_enable 2 dummy1 l3
+	$IP stats set dev dummy1 ${type}_stats on 2>/dev/null
+	check_fail $? "$type stats request not bounced as it should have been"
+
+	netdev_check_unused dummy1 $type
+	check_err $? "$type stats reported as used after bounce"
+	netdev_check_unrequested dummy1 $type
+	check_err $? "$type stats reported as requested after bounce"
+
+	sleep 2
+
+	$IP stats set dev dummy1 ${type}_stats on
+	check_err $? "$type stats request not upheld as it should have been"
+
+	local pkts=$(get_hwstat dummy1 l3 rx.packets)
+	((pkts < 10))
+	check_err $? "$type stats show $pkts packets after post-fail enablement"
+
+	$IP stats set dev dummy1 ${type}_stats off
+
+	nsim_hwstats_disable 3 dummy1 l3
+	nsim_hwstats_disable 2 dummy1 l3
+	nsim_hwstats_disable 1 dummy1 l3
+
+	log_test "Failure in $type stats enablement rolled back"
+}
+
+l3_rollback_test()
+{
+	rollback_test l3
+}
+
+l3_monitor_test()
+{
+	hw_stats_monitor_test dummy1 l3		   \
+		"nsim_hwstats_enable 1 dummy1 l3"  \
+		"nsim_hwstats_disable 1 dummy1 l3" \
+		"$IP"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh
new file mode 100755
index 0000000000..e8e0dc088d
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh
@@ -0,0 +1,1058 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test is for checking the nexthop offload API. It makes use of netdevsim
+# which registers a listener to the nexthop notification chain.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	nexthop_single_add_test
+	nexthop_single_add_err_test
+	nexthop_group_add_test
+	nexthop_group_add_err_test
+	nexthop_res_group_add_test
+	nexthop_res_group_add_err_test
+	nexthop_group_replace_test
+	nexthop_group_replace_err_test
+	nexthop_res_group_replace_test
+	nexthop_res_group_replace_err_test
+	nexthop_res_group_idle_timer_test
+	nexthop_res_group_idle_timer_del_test
+	nexthop_res_group_increase_idle_timer_test
+	nexthop_res_group_decrease_idle_timer_test
+	nexthop_res_group_unbalanced_timer_test
+	nexthop_res_group_unbalanced_timer_del_test
+	nexthop_res_group_no_unbalanced_timer_test
+	nexthop_res_group_short_unbalanced_timer_test
+	nexthop_res_group_increase_unbalanced_timer_test
+	nexthop_res_group_decrease_unbalanced_timer_test
+	nexthop_res_group_force_migrate_busy_test
+	nexthop_single_replace_test
+	nexthop_single_replace_err_test
+	nexthop_single_in_group_replace_test
+	nexthop_single_in_group_replace_err_test
+	nexthop_single_in_res_group_replace_test
+	nexthop_single_in_res_group_replace_err_test
+	nexthop_single_in_group_delete_test
+	nexthop_single_in_group_delete_err_test
+	nexthop_single_in_res_group_delete_test
+	nexthop_single_in_res_group_delete_err_test
+	nexthop_replay_test
+	nexthop_replay_err_test
+"
+NETDEVSIM_PATH=/sys/bus/netdevsim/
+DEV_ADDR=1337
+DEV=netdevsim${DEV_ADDR}
+SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/
+DEBUGFS_NET_DIR=/sys/kernel/debug/netdevsim/$DEV/
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+
+DEVLINK_DEV=
+source $lib_dir/devlink_lib.sh
+DEVLINK_DEV=netdevsim/${DEV}
+
+nexthop_check()
+{
+	local nharg="$1"; shift
+	local expected="$1"; shift
+
+	out=$($IP nexthop show ${nharg} | sed -e 's/ *$//')
+	if [[ "$out" != "$expected" ]]; then
+		return 1
+	fi
+
+	return 0
+}
+
+nexthop_bucket_nhid_count_check()
+{
+	local group_id=$1; shift
+	local expected
+	local count
+	local nhid
+	local ret
+
+	while (($# > 0)); do
+		nhid=$1; shift
+		expected=$1; shift
+
+		count=$($IP nexthop bucket show id $group_id nhid $nhid |
+			grep "trap" | wc -l)
+		if ((expected != count)); then
+			return 1
+		fi
+	done
+
+	return 0
+}
+
+nexthop_resource_check()
+{
+	local expected_occ=$1; shift
+
+	occ=$($DEVLINK -jp resource show $DEVLINK_DEV \
+		| jq '.[][][] | select(.name=="nexthops") | .["occ"]')
+
+	if [ $expected_occ -ne $occ ]; then
+		return 1
+	fi
+
+	return 0
+}
+
+nexthop_resource_set()
+{
+	local size=$1; shift
+
+	$DEVLINK resource set $DEVLINK_DEV path nexthops size $size
+	$DEVLINK dev reload $DEVLINK_DEV
+}
+
+nexthop_single_add_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap"
+	check_err $? "Unexpected nexthop entry"
+
+	nexthop_resource_check 1
+	check_err $? "Wrong nexthop occupancy"
+
+	$IP nexthop del id 1
+	nexthop_resource_check 0
+	check_err $? "Wrong nexthop occupancy after delete"
+
+	log_test "Single nexthop add and delete"
+}
+
+nexthop_single_add_err_test()
+{
+	RET=0
+
+	nexthop_resource_set 1
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1 &> /dev/null
+	check_fail $? "Nexthop addition succeeded when should fail"
+
+	nexthop_resource_check 1
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop add failure"
+
+	$IP nexthop flush &> /dev/null
+	nexthop_resource_set 9999
+}
+
+nexthop_group_add_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	$IP nexthop add id 10 group 1/2
+	nexthop_check "id 10" "id 10 group 1/2 trap"
+	check_err $? "Unexpected nexthop group entry"
+
+	nexthop_resource_check 4
+	check_err $? "Wrong nexthop occupancy"
+
+	$IP nexthop del id 10
+	nexthop_resource_check 2
+	check_err $? "Wrong nexthop occupancy after delete"
+
+	$IP nexthop add id 10 group 1,20/2,39
+	nexthop_check "id 10" "id 10 group 1,20/2,39 trap"
+	check_err $? "Unexpected weighted nexthop group entry"
+
+	nexthop_resource_check 61
+	check_err $? "Wrong weighted nexthop occupancy"
+
+	$IP nexthop del id 10
+	nexthop_resource_check 2
+	check_err $? "Wrong nexthop occupancy after delete"
+
+	log_test "Nexthop group add and delete"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_group_add_err_test()
+{
+	RET=0
+
+	nexthop_resource_set 2
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	$IP nexthop add id 10 group 1/2 &> /dev/null
+	check_fail $? "Nexthop group addition succeeded when should fail"
+
+	nexthop_resource_check 2
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Nexthop group add failure"
+
+	$IP nexthop flush &> /dev/null
+	nexthop_resource_set 9999
+}
+
+nexthop_res_group_add_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	$IP nexthop add id 10 group 1/2 type resilient buckets 4
+	nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap"
+	check_err $? "Unexpected nexthop group entry"
+
+	nexthop_bucket_nhid_count_check 10 1 2
+	check_err $? "Wrong nexthop buckets count"
+	nexthop_bucket_nhid_count_check 10 2 2
+	check_err $? "Wrong nexthop buckets count"
+
+	nexthop_resource_check 6
+	check_err $? "Wrong nexthop occupancy"
+
+	$IP nexthop del id 10
+	nexthop_resource_check 2
+	check_err $? "Wrong nexthop occupancy after delete"
+
+	$IP nexthop add id 10 group 1,3/2,2 type resilient buckets 5
+	nexthop_check "id 10" "id 10 group 1,3/2,2 type resilient buckets 5 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap"
+	check_err $? "Unexpected weighted nexthop group entry"
+
+	nexthop_bucket_nhid_count_check 10 1 3
+	check_err $? "Wrong nexthop buckets count"
+	nexthop_bucket_nhid_count_check 10 2 2
+	check_err $? "Wrong nexthop buckets count"
+
+	nexthop_resource_check 7
+	check_err $? "Wrong weighted nexthop occupancy"
+
+	$IP nexthop del id 10
+	nexthop_resource_check 2
+	check_err $? "Wrong nexthop occupancy after delete"
+
+	log_test "Resilient nexthop group add and delete"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_res_group_add_err_test()
+{
+	RET=0
+
+	nexthop_resource_set 2
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	$IP nexthop add id 10 group 1/2 type resilient buckets 4 &> /dev/null
+	check_fail $? "Nexthop group addition succeeded when should fail"
+
+	nexthop_resource_check 2
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Resilient nexthop group add failure"
+
+	$IP nexthop flush &> /dev/null
+	nexthop_resource_set 9999
+}
+
+nexthop_group_replace_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 3 via 192.0.2.4 dev dummy1
+	$IP nexthop add id 10 group 1/2
+
+	$IP nexthop replace id 10 group 1/2/3
+	nexthop_check "id 10" "id 10 group 1/2/3 trap"
+	check_err $? "Unexpected nexthop group entry"
+
+	nexthop_resource_check 6
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Nexthop group replace"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_group_replace_err_test()
+{
+	RET=0
+
+	nexthop_resource_set 5
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 3 via 192.0.2.4 dev dummy1
+	$IP nexthop add id 10 group 1/2
+
+	$IP nexthop replace id 10 group 1/2/3 &> /dev/null
+	check_fail $? "Nexthop group replacement succeeded when should fail"
+
+	nexthop_check "id 10" "id 10 group 1/2 trap"
+	check_err $? "Unexpected nexthop group entry after failure"
+
+	nexthop_resource_check 5
+	check_err $? "Wrong nexthop occupancy after failure"
+
+	log_test "Nexthop group replace failure"
+
+	$IP nexthop flush &> /dev/null
+	nexthop_resource_set 9999
+}
+
+nexthop_res_group_replace_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 3 via 192.0.2.4 dev dummy1
+	$IP nexthop add id 10 group 1/2 type resilient buckets 6
+
+	$IP nexthop replace id 10 group 1/2/3 type resilient
+	nexthop_check "id 10" "id 10 group 1/2/3 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap"
+	check_err $? "Unexpected nexthop group entry"
+
+	nexthop_bucket_nhid_count_check 10 1 2
+	check_err $? "Wrong nexthop buckets count"
+	nexthop_bucket_nhid_count_check 10 2 2
+	check_err $? "Wrong nexthop buckets count"
+	nexthop_bucket_nhid_count_check 10 3 2
+	check_err $? "Wrong nexthop buckets count"
+
+	nexthop_resource_check 9
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Resilient nexthop group replace"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_res_group_replace_err_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 3 via 192.0.2.4 dev dummy1
+	$IP nexthop add id 10 group 1/2 type resilient buckets 6
+
+	ip netns exec testns1 \
+		echo 1 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace
+	$IP nexthop replace id 10 group 1/2/3 type resilient &> /dev/null
+	check_fail $? "Nexthop group replacement succeeded when should fail"
+
+	nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap"
+	check_err $? "Unexpected nexthop group entry after failure"
+
+	nexthop_bucket_nhid_count_check 10 1 3
+	check_err $? "Wrong nexthop buckets count"
+	nexthop_bucket_nhid_count_check 10 2 3
+	check_err $? "Wrong nexthop buckets count"
+
+	nexthop_resource_check 9
+	check_err $? "Wrong nexthop occupancy after failure"
+
+	log_test "Resilient nexthop group replace failure"
+
+	$IP nexthop flush &> /dev/null
+	ip netns exec testns1 \
+		echo 0 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace
+}
+
+nexthop_res_mark_buckets_busy()
+{
+	local group_id=$1; shift
+	local nhid=$1; shift
+	local count=$1; shift
+	local index
+
+	for index in $($IP -j nexthop bucket show id $group_id nhid $nhid |
+		       jq '.[].bucket.index' | head -n ${count:--0})
+	do
+		echo $group_id $index \
+			> $DEBUGFS_NET_DIR/fib/nexthop_bucket_activity
+	done
+}
+
+nexthop_res_num_nhid_buckets()
+{
+	local group_id=$1; shift
+	local nhid=$1; shift
+
+	$IP -j nexthop bucket show id $group_id nhid $nhid | jq length
+}
+
+nexthop_res_group_idle_timer_test()
+{
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1/2 type resilient buckets 8 idle_timer 4
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1/2,3 type resilient
+
+	nexthop_bucket_nhid_count_check 10  1 4  2 4
+	check_err $? "Group expected to be unbalanced"
+
+	sleep 6
+
+	nexthop_bucket_nhid_count_check 10  1 2  2 6
+	check_err $? "Group expected to be balanced"
+
+	log_test "Bucket migration after idle timer"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_res_group_idle_timer_del_test()
+{
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 3 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1,50/2,50/3,1 \
+	    type resilient buckets 8 idle_timer 6
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient
+
+	nexthop_bucket_nhid_count_check 10  1 4  2 4  3 0
+	check_err $? "Group expected to be unbalanced"
+
+	sleep 4
+
+	# Deletion prompts group replacement. Check that the bucket timers
+	# are kept.
+	$IP nexthop delete id 3
+
+	nexthop_bucket_nhid_count_check 10  1 4  2 4
+	check_err $? "Group expected to still be unbalanced"
+
+	sleep 4
+
+	nexthop_bucket_nhid_count_check 10  1 2  2 6
+	check_err $? "Group expected to be balanced"
+
+	log_test "Bucket migration after idle timer (with delete)"
+
+	$IP nexthop flush &> /dev/null
+}
+
+__nexthop_res_group_increase_timer_test()
+{
+	local timer=$1; shift
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 4
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1/2,3 type resilient
+
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_fail $? "Group expected to be unbalanced"
+
+	sleep 2
+	$IP nexthop replace id 10 group 1/2,3 type resilient $timer 8
+	sleep 4
+
+	# 6 seconds, past the original timer.
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_fail $? "Group still expected to be unbalanced"
+
+	sleep 4
+
+	# 10 seconds, past the new timer.
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_err $? "Group expected to be balanced"
+
+	log_test "Bucket migration after $timer increase"
+
+	$IP nexthop flush &> /dev/null
+}
+
+__nexthop_res_group_decrease_timer_test()
+{
+	local timer=$1; shift
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 8
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1/2,3 type resilient
+
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_fail $? "Group expected to be unbalanced"
+
+	sleep 2
+	$IP nexthop replace id 10 group 1/2,3 type resilient $timer 4
+	sleep 4
+
+	# 6 seconds, past the new timer, before the old timer.
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_err $? "Group expected to be balanced"
+
+	log_test "Bucket migration after $timer decrease"
+
+	$IP nexthop flush &> /dev/null
+}
+
+__nexthop_res_group_increase_timer_del_test()
+{
+	local timer=$1; shift
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 3 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1,100/2,100/3,1 \
+	    type resilient buckets 8 $timer 4
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1,100/2,300/3,1 type resilient
+
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_fail $? "Group expected to be unbalanced"
+
+	sleep 2
+	$IP nexthop replace id 10 group 1/2,3 type resilient $timer 8
+	sleep 4
+
+	# 6 seconds, past the original timer.
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_fail $? "Group still expected to be unbalanced"
+
+	sleep 4
+
+	# 10 seconds, past the new timer.
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_err $? "Group expected to be balanced"
+
+	log_test "Bucket migration after $timer increase"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_res_group_increase_idle_timer_test()
+{
+	__nexthop_res_group_increase_timer_test idle_timer
+}
+
+nexthop_res_group_decrease_idle_timer_test()
+{
+	__nexthop_res_group_decrease_timer_test idle_timer
+}
+
+nexthop_res_group_unbalanced_timer_test()
+{
+	local i
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1/2 type resilient \
+	    buckets 8 idle_timer 6 unbalanced_timer 10
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1/2,3 type resilient
+
+	for i in 1 2; do
+		sleep 4
+		nexthop_bucket_nhid_count_check 10  1 4  2 4
+		check_err $? "$i: Group expected to be unbalanced"
+		nexthop_res_mark_buckets_busy 10 1
+	done
+
+	# 3 x sleep 4 > unbalanced timer 10
+	sleep 4
+	nexthop_bucket_nhid_count_check 10  1 2  2 6
+	check_err $? "Group expected to be balanced"
+
+	log_test "Bucket migration after unbalanced timer"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_res_group_unbalanced_timer_del_test()
+{
+	local i
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 3 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1,50/2,50/3,1 type resilient \
+	    buckets 8 idle_timer 6 unbalanced_timer 10
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient
+
+	# Check that NH delete does not reset unbalanced time.
+	sleep 4
+	$IP nexthop delete id 3
+	nexthop_bucket_nhid_count_check 10  1 4  2 4
+	check_err $? "1: Group expected to be unbalanced"
+	nexthop_res_mark_buckets_busy 10 1
+
+	sleep 4
+	nexthop_bucket_nhid_count_check 10  1 4  2 4
+	check_err $? "2: Group expected to be unbalanced"
+	nexthop_res_mark_buckets_busy 10 1
+
+	# 3 x sleep 4 > unbalanced timer 10
+	sleep 4
+	nexthop_bucket_nhid_count_check 10  1 2  2 6
+	check_err $? "Group expected to be balanced"
+
+	log_test "Bucket migration after unbalanced timer (with delete)"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_res_group_no_unbalanced_timer_test()
+{
+	local i
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1/2 type resilient buckets 8
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1/2,3 type resilient
+
+	for i in $(seq 3); do
+		sleep 60
+		nexthop_bucket_nhid_count_check 10 2 6
+		check_fail $? "$i: Group expected to be unbalanced"
+		nexthop_res_mark_buckets_busy 10 1
+	done
+
+	log_test "Buckets never force-migrated without unbalanced timer"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_res_group_short_unbalanced_timer_test()
+{
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1/2 type resilient \
+	    buckets 8 idle_timer 120 unbalanced_timer 4
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1/2,3 type resilient
+
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_fail $? "Group expected to be unbalanced"
+
+	sleep 5
+
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_err $? "Group expected to be balanced"
+
+	log_test "Bucket migration after unbalanced < idle timer"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_res_group_increase_unbalanced_timer_test()
+{
+	__nexthop_res_group_increase_timer_test unbalanced_timer
+}
+
+nexthop_res_group_decrease_unbalanced_timer_test()
+{
+	__nexthop_res_group_decrease_timer_test unbalanced_timer
+}
+
+nexthop_res_group_force_migrate_busy_test()
+{
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+
+	RET=0
+
+	$IP nexthop add id 10 group 1/2 type resilient \
+	    buckets 8 idle_timer 120
+	nexthop_res_mark_buckets_busy 10 1
+	$IP nexthop replace id 10 group 1/2,3 type resilient
+
+	nexthop_bucket_nhid_count_check 10 2 6
+	check_fail $? "Group expected to be unbalanced"
+
+	$IP nexthop replace id 10 group 2 type resilient
+	nexthop_bucket_nhid_count_check 10 2 8
+	check_err $? "All buckets expected to have migrated"
+
+	log_test "Busy buckets force-migrated when NH removed"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_single_replace_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+
+	$IP nexthop replace id 1 via 192.0.2.3 dev dummy1
+	nexthop_check "id 1" "id 1 via 192.0.2.3 dev dummy1 scope link trap"
+	check_err $? "Unexpected nexthop entry"
+
+	nexthop_resource_check 1
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop replace"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_single_replace_err_test()
+{
+	RET=0
+
+	# This is supposed to cause the replace to fail because the new nexthop
+	# is programmed before deleting the replaced one.
+	nexthop_resource_set 1
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+
+	$IP nexthop replace id 1 via 192.0.2.3 dev dummy1 &> /dev/null
+	check_fail $? "Nexthop replace succeeded when should fail"
+
+	nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap"
+	check_err $? "Unexpected nexthop entry after failure"
+
+	nexthop_resource_check 1
+	check_err $? "Wrong nexthop occupancy after failure"
+
+	log_test "Single nexthop replace failure"
+
+	$IP nexthop flush &> /dev/null
+	nexthop_resource_set 9999
+}
+
+nexthop_single_in_group_replace_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 10 group 1/2
+
+	$IP nexthop replace id 1 via 192.0.2.4 dev dummy1
+	check_err $? "Failed to replace nexthop when should not"
+
+	nexthop_check "id 10" "id 10 group 1/2 trap"
+	check_err $? "Unexpected nexthop group entry"
+
+	nexthop_resource_check 4
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop replace while in group"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_single_in_group_replace_err_test()
+{
+	RET=0
+
+	nexthop_resource_set 5
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 10 group 1/2
+
+	$IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null
+	check_fail $? "Nexthop replacement succeeded when should fail"
+
+	nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap"
+	check_err $? "Unexpected nexthop entry after failure"
+
+	nexthop_check "id 10" "id 10 group 1/2 trap"
+	check_err $? "Unexpected nexthop group entry after failure"
+
+	nexthop_resource_check 4
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop replace while in group failure"
+
+	$IP nexthop flush &> /dev/null
+	nexthop_resource_set 9999
+}
+
+nexthop_single_in_res_group_replace_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 10 group 1/2 type resilient buckets 4
+
+	$IP nexthop replace id 1 via 192.0.2.4 dev dummy1
+	check_err $? "Failed to replace nexthop when should not"
+
+	nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap"
+	check_err $? "Unexpected nexthop group entry"
+
+	nexthop_bucket_nhid_count_check 10  1 2  2 2
+	check_err $? "Wrong nexthop buckets count"
+
+	nexthop_resource_check 6
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop replace while in resilient group"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_single_in_res_group_replace_err_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 10 group 1/2 type resilient buckets 4
+
+	ip netns exec testns1 \
+		echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace
+	$IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null
+	check_fail $? "Nexthop replacement succeeded when should fail"
+
+	nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap"
+	check_err $? "Unexpected nexthop entry after failure"
+
+	nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap"
+	check_err $? "Unexpected nexthop group entry after failure"
+
+	nexthop_bucket_nhid_count_check 10  1 2  2 2
+	check_err $? "Wrong nexthop buckets count"
+
+	nexthop_resource_check 6
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop replace while in resilient group failure"
+
+	$IP nexthop flush &> /dev/null
+	ip netns exec testns1 \
+		echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace
+}
+
+nexthop_single_in_group_delete_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 10 group 1/2
+
+	$IP nexthop del id 1
+	nexthop_check "id 10" "id 10 group 2 trap"
+	check_err $? "Unexpected nexthop group entry"
+
+	nexthop_resource_check 2
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop delete while in group"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_single_in_group_delete_err_test()
+{
+	RET=0
+
+	# First, nexthop 1 will be deleted, which will reduce the occupancy to
+	# 5. Afterwards, a replace notification will be sent for nexthop group
+	# 10 with only two nexthops. Since the new group is allocated before
+	# the old is deleted, the replacement will fail as it will result in an
+	# occupancy of 7.
+	nexthop_resource_set 6
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 3 via 192.0.2.4 dev dummy1
+	$IP nexthop add id 10 group 1/2/3
+
+	$IP nexthop del id 1
+
+	nexthop_resource_check 5
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop delete while in group failure"
+
+	$IP nexthop flush &> /dev/null
+	nexthop_resource_set 9999
+}
+
+nexthop_single_in_res_group_delete_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 10 group 1/2 type resilient buckets 4
+
+	$IP nexthop del id 1
+	nexthop_check "id 10" "id 10 group 2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap"
+	check_err $? "Unexpected nexthop group entry"
+
+	nexthop_bucket_nhid_count_check 10 2 4
+	check_err $? "Wrong nexthop buckets count"
+
+	nexthop_resource_check 5
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop delete while in resilient group"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_single_in_res_group_delete_err_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 3 via 192.0.2.4 dev dummy1
+	$IP nexthop add id 10 group 1/2/3 type resilient buckets 6
+
+	ip netns exec testns1 \
+		echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace
+	$IP nexthop del id 1
+
+	# We failed to replace the two nexthop buckets that were originally
+	# assigned to nhid 1.
+	nexthop_bucket_nhid_count_check 10  2 2  3 2
+	check_err $? "Wrong nexthop buckets count"
+
+	nexthop_resource_check 8
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Single nexthop delete while in resilient group failure"
+
+	$IP nexthop flush &> /dev/null
+	ip netns exec testns1 \
+		echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace
+}
+
+nexthop_replay_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 10 group 1/2
+
+	$DEVLINK dev reload $DEVLINK_DEV
+	check_err $? "Failed to reload when should not"
+
+	nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap"
+	check_err $? "Unexpected nexthop entry after reload"
+
+	nexthop_check "id 2" "id 2 via 192.0.2.3 dev dummy1 scope link trap"
+	check_err $? "Unexpected nexthop entry after reload"
+
+	nexthop_check "id 10" "id 10 group 1/2 trap"
+	check_err $? "Unexpected nexthop group entry after reload"
+
+	nexthop_resource_check 4
+	check_err $? "Wrong nexthop occupancy"
+
+	log_test "Nexthop replay"
+
+	$IP nexthop flush &> /dev/null
+}
+
+nexthop_replay_err_test()
+{
+	RET=0
+
+	$IP nexthop add id 1 via 192.0.2.2 dev dummy1
+	$IP nexthop add id 2 via 192.0.2.3 dev dummy1
+	$IP nexthop add id 10 group 1/2
+
+	# Reduce size of nexthop resource so that reload will fail.
+	$DEVLINK resource set $DEVLINK_DEV path nexthops size 3
+	$DEVLINK dev reload $DEVLINK_DEV &> /dev/null
+	check_fail $? "Reload succeeded when should fail"
+
+	$DEVLINK resource set $DEVLINK_DEV path nexthops size 9999
+	$DEVLINK dev reload $DEVLINK_DEV
+	check_err $? "Failed to reload when should not"
+
+	log_test "Nexthop replay failure"
+
+	$IP nexthop flush &> /dev/null
+}
+
+setup_prepare()
+{
+	local netdev
+
+	modprobe netdevsim &> /dev/null
+
+	echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device
+	while [ ! -d $SYSFS_NET_DIR ] ; do :; done
+
+	set -e
+
+	ip netns add testns1
+	devlink dev reload $DEVLINK_DEV netns testns1
+
+	IP="ip -netns testns1"
+	DEVLINK="devlink -N testns1"
+
+	$IP link add name dummy1 up type dummy
+	$IP address add 192.0.2.1/24 dev dummy1
+
+	set +e
+}
+
+cleanup()
+{
+	pre_cleanup
+	ip netns del testns1
+	echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device
+	modprobe -r netdevsim &> /dev/null
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/netdevsim/psample.sh b/tools/testing/selftests/drivers/net/netdevsim/psample.sh
new file mode 100755
index 0000000000..e689ff7a0b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/psample.sh
@@ -0,0 +1,183 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test is for checking the psample module. It makes use of netdevsim
+# which periodically generates "sampled" packets.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	psample_enable_test
+	psample_group_num_test
+	psample_md_test
+"
+NETDEVSIM_PATH=/sys/bus/netdevsim/
+DEV_ADDR=1337
+DEV=netdevsim${DEV_ADDR}
+SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/
+PSAMPLE_DIR=/sys/kernel/debug/netdevsim/$DEV/psample/
+CAPTURE_FILE=$(mktemp)
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+
+DEVLINK_DEV=
+source $lib_dir/devlink_lib.sh
+DEVLINK_DEV=netdevsim/${DEV}
+
+# Available at https://github.com/Mellanox/libpsample
+require_command psample
+
+psample_capture()
+{
+	rm -f $CAPTURE_FILE
+
+	timeout 2 ip netns exec testns1 psample &> $CAPTURE_FILE
+}
+
+psample_enable_test()
+{
+	RET=0
+
+	echo 1 > $PSAMPLE_DIR/enable
+	check_err $? "Failed to enable sampling when should not"
+
+	echo 1 > $PSAMPLE_DIR/enable 2>/dev/null
+	check_fail $? "Sampling enablement succeeded when should fail"
+
+	psample_capture
+	if [ $(cat $CAPTURE_FILE | wc -l) -eq 0 ]; then
+		check_err 1 "Failed to capture sampled packets"
+	fi
+
+	echo 0 > $PSAMPLE_DIR/enable
+	check_err $? "Failed to disable sampling when should not"
+
+	echo 0 > $PSAMPLE_DIR/enable 2>/dev/null
+	check_fail $? "Sampling disablement succeeded when should fail"
+
+	psample_capture
+	if [ $(cat $CAPTURE_FILE | wc -l) -ne 0 ]; then
+		check_err 1 "Captured sampled packets when should not"
+	fi
+
+	log_test "psample enable / disable"
+}
+
+psample_group_num_test()
+{
+	RET=0
+
+	echo 1234 > $PSAMPLE_DIR/group_num
+	echo 1 > $PSAMPLE_DIR/enable
+
+	psample_capture
+	grep -q -e "group 1234" $CAPTURE_FILE
+	check_err $? "Sampled packets reported with wrong group number"
+
+	# New group number should only be used after disable / enable.
+	echo 4321 > $PSAMPLE_DIR/group_num
+
+	psample_capture
+	grep -q -e "group 4321" $CAPTURE_FILE
+	check_fail $? "Group number changed while sampling is active"
+
+	echo 0 > $PSAMPLE_DIR/enable && echo 1 > $PSAMPLE_DIR/enable
+
+	psample_capture
+	grep -q -e "group 4321" $CAPTURE_FILE
+	check_err $? "Group number did not change after restarting sampling"
+
+	log_test "psample group number"
+
+	echo 0 > $PSAMPLE_DIR/enable
+}
+
+psample_md_test()
+{
+	RET=0
+
+	echo 1 > $PSAMPLE_DIR/enable
+
+	echo 1234 > $PSAMPLE_DIR/in_ifindex
+	echo 4321 > $PSAMPLE_DIR/out_ifindex
+	psample_capture
+
+	grep -q -e "in-ifindex 1234" $CAPTURE_FILE
+	check_err $? "Sampled packets reported with wrong in-ifindex"
+
+	grep -q -e "out-ifindex 4321" $CAPTURE_FILE
+	check_err $? "Sampled packets reported with wrong out-ifindex"
+
+	echo 5 > $PSAMPLE_DIR/out_tc
+	psample_capture
+
+	grep -q -e "out-tc 5" $CAPTURE_FILE
+	check_err $? "Sampled packets reported with wrong out-tc"
+
+	echo $((2**16 - 1)) > $PSAMPLE_DIR/out_tc
+	psample_capture
+
+	grep -q -e "out-tc " $CAPTURE_FILE
+	check_fail $? "Sampled packets reported with out-tc when should not"
+
+	echo 1 > $PSAMPLE_DIR/out_tc
+	echo 10000 > $PSAMPLE_DIR/out_tc_occ_max
+	psample_capture
+
+	grep -q -e "out-tc-occ " $CAPTURE_FILE
+	check_err $? "Sampled packets not reported with out-tc-occ when should"
+
+	echo 0 > $PSAMPLE_DIR/out_tc_occ_max
+	psample_capture
+
+	grep -q -e "out-tc-occ " $CAPTURE_FILE
+	check_fail $? "Sampled packets reported with out-tc-occ when should not"
+
+	echo 10000 > $PSAMPLE_DIR/latency_max
+	psample_capture
+
+	grep -q -e "latency " $CAPTURE_FILE
+	check_err $? "Sampled packets not reported with latency when should"
+
+	echo 0 > $PSAMPLE_DIR/latency_max
+	psample_capture
+
+	grep -q -e "latency " $CAPTURE_FILE
+	check_fail $? "Sampled packets reported with latency when should not"
+
+	log_test "psample metadata"
+
+	echo 0 > $PSAMPLE_DIR/enable
+}
+
+setup_prepare()
+{
+	modprobe netdevsim &> /dev/null
+
+	echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device
+	while [ ! -d $SYSFS_NET_DIR ] ; do :; done
+
+	set -e
+
+	ip netns add testns1
+	devlink dev reload $DEVLINK_DEV netns testns1
+
+	set +e
+}
+
+cleanup()
+{
+	pre_cleanup
+	rm -f $CAPTURE_FILE
+	ip netns del testns1
+	echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device
+	modprobe -r netdevsim &> /dev/null
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh
new file mode 100755
index 0000000000..fd13c8cfb7
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh
@@ -0,0 +1,77 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+source ethtool-common.sh
+
+set -o pipefail
+
+n_children() {
+    n=$(tc qdisc show dev $NDEV | grep '^qdisc' | wc -l)
+    echo $((n - 1))
+}
+
+tcq() {
+    tc qdisc $1 dev $NDEV ${@:2}
+}
+
+n_child_assert() {
+    n=$(n_children)
+    if [ $n -ne $1 ]; then
+	echo "ERROR ($root): ${@:2}, expected $1 have $n"
+	((num_errors++))
+    else
+	((num_passes++))
+    fi
+}
+
+
+for root in mq mqprio; do
+    NDEV=$(make_netdev 1 4)
+
+    opts=
+    [ $root == "mqprio" ] && opts='hw 0 num_tc 1 map 0 0 0 0  queues 1@0'
+
+    tcq add root handle 100: $root $opts
+    n_child_assert 4 'Init'
+
+    # All defaults
+
+    for n in 3 2 1 2 3 4 1 4; do
+	ethtool -L $NDEV combined $n
+	n_child_assert $n "Change queues to $n while down"
+    done
+
+    ip link set dev $NDEV up
+
+    for n in 3 2 1 2 3 4 1 4; do
+	ethtool -L $NDEV combined $n
+	n_child_assert $n "Change queues to $n while up"
+    done
+
+    # One real one
+    tcq replace parent 100:4 handle 204: pfifo_fast
+    n_child_assert 4 "One real queue"
+
+    ethtool -L $NDEV combined 1
+    n_child_assert 2 "One real queue, one default"
+
+    ethtool -L $NDEV combined 4
+    n_child_assert 4 "One real queue, rest default"
+
+    # Graft some
+    tcq replace parent 100:1 handle 204:
+    n_child_assert 3 "Grafted"
+
+    ethtool -L $NDEV combined 1
+    n_child_assert 1 "Grafted, one"
+
+    cleanup_nsim
+done
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $((num_passes)) checks"
+    exit 0
+else
+    echo "FAILED $num_errors/$((num_errors+num_passes)) checks"
+    exit 1
+fi
diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
new file mode 100755
index 0000000000..185b02d2d4
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
@@ -0,0 +1,962 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+VNI_GEN=$RANDOM
+NSIM_ID=$((RANDOM % 1024))
+NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID
+NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID
+NSIM_NETDEV=
+HAS_ETHTOOL=
+STATIC_ENTRIES=
+EXIT_STATUS=0
+num_cases=0
+num_errors=0
+
+clean_up_devs=( )
+
+function err_cnt {
+    echo "ERROR:" $@
+    EXIT_STATUS=1
+    ((num_errors++))
+    ((num_cases++))
+}
+
+function pass_cnt {
+    ((num_cases++))
+}
+
+function cleanup_tuns {
+    for dev in "${clean_up_devs[@]}"; do
+	[ -e /sys/class/net/$dev ] && ip link del dev $dev
+    done
+    clean_up_devs=( )
+}
+
+function cleanup_nsim {
+    if [ -e $NSIM_DEV_SYS ]; then
+	echo $NSIM_ID > /sys/bus/netdevsim/del_device
+    fi
+}
+
+function cleanup {
+    cleanup_tuns
+    cleanup_nsim
+}
+
+trap cleanup EXIT
+
+function new_vxlan {
+    local dev=$1
+    local dstport=$2
+    local lower=$3
+    local ipver=$4
+    local flags=$5
+
+    local group ipfl
+
+    [ "$ipver" != '6' ] && group=239.1.1.1 || group=fff1::1
+    [ "$ipver" != '6' ] || ipfl="-6"
+
+    [[ ! "$flags" =~ "external" ]] && flags="$flags id $((VNI_GEN++))"
+
+    ip $ipfl link add $dev type vxlan \
+       group $group \
+       dev $lower \
+       dstport $dstport \
+       $flags
+
+    ip link set dev $dev up
+
+    clean_up_devs=("${clean_up_devs[@]}" $dev)
+
+    check_tables
+}
+
+function new_geneve {
+    local dev=$1
+    local dstport=$2
+    local ipver=$3
+    local flags=$4
+
+    local group ipfl
+
+    [ "$ipver" != '6' ] && remote=1.1.1.2 || group=::2
+    [ "$ipver" != '6' ] || ipfl="-6"
+
+    [[ ! "$flags" =~ "external" ]] && flags="$flags vni $((VNI_GEN++))"
+
+    ip $ipfl link add $dev type geneve \
+       remote $remote  \
+       dstport $dstport \
+       $flags
+
+    ip link set dev $dev up
+
+    clean_up_devs=("${clean_up_devs[@]}" $dev)
+
+    check_tables
+}
+
+function del_dev {
+    local dev=$1
+
+    ip link del dev $dev
+    check_tables
+}
+
+# Helpers for netdevsim port/type encoding
+function mke {
+    local port=$1
+    local type=$2
+
+    echo $((port << 16 | type))
+}
+
+function pre {
+    local val=$1
+
+    echo -e "port: $((val >> 16))\ttype: $((val & 0xffff))"
+}
+
+function pre_ethtool {
+    local val=$1
+    local port=$((val >> 16))
+    local type=$((val & 0xffff))
+
+    case $type in
+	1)
+	    type_name="vxlan"
+	    ;;
+	2)
+	    type_name="geneve"
+	    ;;
+	4)
+	    type_name="vxlan-gpe"
+	    ;;
+	*)
+	    type_name="bit X"
+	    ;;
+    esac
+
+    echo "port $port, $type_name"
+}
+
+function check_table {
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    local -n expected=$2
+    local last=$3
+
+    read -a have < $path
+
+    if [ ${#expected[@]} -ne ${#have[@]} ]; then
+	echo "check_table: BAD NUMBER OF ITEMS"
+	return 0
+    fi
+
+    for i in "${!expected[@]}"; do
+	if [ -n "$HAS_ETHTOOL" -a ${expected[i]} -ne 0 ]; then
+	    pp_expected=`pre_ethtool ${expected[i]}`
+	    ethtool --show-tunnels $NSIM_NETDEV | grep "$pp_expected" >/dev/null
+	    if [ $? -ne 0 -a $last -ne 0 ]; then
+		err_cnt "ethtool table $1 on port $port: $pfx - $msg"
+		echo "       check_table: ethtool does not contain '$pp_expected'"
+		ethtool --show-tunnels $NSIM_NETDEV
+		return 0
+
+	    fi
+	fi
+
+	if [ ${expected[i]} != ${have[i]} ]; then
+	    if [ $last -ne 0 ]; then
+		err_cnt "table $1 on port $port: $pfx - $msg"
+		echo "       check_table: wrong entry $i"
+		echo "       expected: `pre ${expected[i]}`"
+		echo "       have:     `pre ${have[i]}`"
+		return 0
+	    fi
+	    return 1
+	fi
+    done
+
+    pass_cnt
+    return 0
+}
+
+function check_tables {
+    # Need retries in case we have workqueue making the changes
+    local retries=10
+
+    while ! check_table 0 exp0 $((retries == 0)); do
+	sleep 0.02
+	((retries--))
+    done
+    while ! check_table 1 exp1 $((retries == 0)); do
+	sleep 0.02
+	((retries--))
+    done
+
+    if [ -n "$HAS_ETHTOOL" -a -n "${STATIC_ENTRIES[0]}" ]; then
+	fail=0
+	for i in "${!STATIC_ENTRIES[@]}"; do
+	    pp_expected=`pre_ethtool ${STATIC_ENTRIES[i]}`
+	    cnt=$(ethtool --show-tunnels $NSIM_NETDEV | grep -c "$pp_expected")
+	    if [ $cnt -ne 1 ]; then
+		err_cnt "ethtool static entry: $pfx - $msg"
+		echo "       check_table: ethtool does not contain '$pp_expected'"
+		ethtool --show-tunnels $NSIM_NETDEV
+		fail=1
+	    fi
+	done
+	[ $fail == 0 ] && pass_cnt
+    fi
+}
+
+function print_table {
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    read -a have < $path
+
+    tree $NSIM_DEV_DFS/
+
+    echo "Port $port table $1:"
+
+    for i in "${!have[@]}"; do
+	echo "    `pre ${have[i]}`"
+    done
+
+}
+
+function print_tables {
+    print_table 0
+    print_table 1
+}
+
+function get_netdev_name {
+    local -n old=$1
+
+    new=$(ls /sys/class/net)
+
+    for netdev in $new; do
+	for check in $old; do
+            [ $netdev == $check ] && break
+	done
+
+	if [ $netdev != $check ]; then
+	    echo $netdev
+	    break
+	fi
+    done
+}
+
+###
+### Code start
+###
+
+# Probe ethtool support
+ethtool -h | grep show-tunnels 2>&1 >/dev/null && HAS_ETHTOOL=y
+
+modprobe netdevsim
+
+# Basic test
+pfx="basic"
+
+for port in 0 1; do
+    old_netdevs=$(ls /sys/class/net)
+    if [ $port -eq 0 ]; then
+	echo $NSIM_ID > /sys/bus/netdevsim/new_device
+    else
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+	echo 1 > $NSIM_DEV_SYS/new_port
+    fi
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+    ifconfig $NSIM_NETDEV up
+
+    msg="new NIC device created"
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+    check_tables
+
+    msg="VxLAN v4 devices"
+    exp0=( `mke 4789 1` 0 0 0 )
+    new_vxlan vxlan0 4789 $NSIM_NETDEV
+    new_vxlan vxlan1 4789 $NSIM_NETDEV
+
+    msg="VxLAN v4 devices go down"
+    exp0=( 0 0 0 0 )
+    ifconfig vxlan1 down
+    ifconfig vxlan0 down
+    check_tables
+
+    msg="VxLAN v6 devices"
+    exp0=( `mke 4789 1` 0 0 0 )
+    new_vxlan vxlanA 4789 $NSIM_NETDEV 6
+
+    for ifc in vxlan0 vxlan1; do
+	ifconfig $ifc up
+    done
+
+    new_vxlan vxlanB 4789 $NSIM_NETDEV 6
+
+    msg="another VxLAN v6 devices"
+    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+    new_vxlan vxlanC 4790 $NSIM_NETDEV 6
+
+    msg="Geneve device"
+    exp1=( `mke 6081 2` 0 0 0 )
+    new_geneve gnv0 6081
+
+    msg="NIC device goes down"
+    ifconfig $NSIM_NETDEV down
+    if [ $port -eq 1 ]; then
+	exp0=( 0 0 0 0 )
+	exp1=( 0 0 0 0 )
+    fi
+    check_tables
+    msg="NIC device goes up again"
+    ifconfig $NSIM_NETDEV up
+    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+    exp1=( `mke 6081 2` 0 0 0 )
+    check_tables
+
+    cleanup_tuns
+
+    msg="tunnels destroyed"
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+    check_tables
+
+    modprobe -r geneve
+    modprobe -r vxlan
+    modprobe -r udp_tunnel
+
+    check_tables
+done
+
+modprobe -r netdevsim
+
+# Module tests
+pfx="module tests"
+
+if modinfo netdevsim | grep udp_tunnel >/dev/null; then
+    err_cnt "netdevsim depends on udp_tunnel"
+else
+    pass_cnt
+fi
+
+modprobe netdevsim
+
+old_netdevs=$(ls /sys/class/net)
+port=0
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+echo 1000 > $NSIM_DEV_DFS/udp_ports_sleep
+echo 0 > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV=`get_netdev_name old_netdevs`
+
+msg="create VxLANs"
+exp0=( 0 0 0 0 ) # sleep is longer than out wait
+new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+modprobe -r vxlan
+modprobe -r udp_tunnel
+
+msg="remove tunnels"
+exp0=( 0 0 0 0 )
+check_tables
+
+msg="create VxLANs"
+exp0=( 0 0 0 0 ) # sleep is longer than out wait
+new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+exp0=( 0 0 0 0 )
+
+modprobe -r netdevsim
+modprobe netdevsim
+
+# Overflow the table
+
+function overflow_table0 {
+    local pfx=$1
+
+    msg="create VxLANs 1/5"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="create VxLANs 2/5"
+    exp0=( `mke 10000 1` `mke 10001 1` 0 0 )
+    new_vxlan vxlan1 10001 $NSIM_NETDEV
+
+    msg="create VxLANs 3/5"
+    exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` 0 )
+    new_vxlan vxlan2 10002 $NSIM_NETDEV
+
+    msg="create VxLANs 4/5"
+    exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` `mke 10003 1` )
+    new_vxlan vxlan3 10003 $NSIM_NETDEV
+
+    msg="create VxLANs 5/5"
+    new_vxlan vxlan4 10004 $NSIM_NETDEV
+}
+
+function overflow_table1 {
+    local pfx=$1
+
+    msg="create GENEVE 1/5"
+    exp1=( `mke 20000 2` 0 0 0 )
+    new_geneve gnv0 20000
+
+    msg="create GENEVE 2/5"
+    exp1=( `mke 20000 2` `mke 20001 2` 0 0 )
+    new_geneve gnv1 20001
+
+    msg="create GENEVE 3/5"
+    exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` 0 )
+    new_geneve gnv2 20002
+
+    msg="create GENEVE 4/5"
+    exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` `mke 20003 2` )
+    new_geneve gnv3 20003
+
+    msg="create GENEVE 5/5"
+    new_geneve gnv4 20004
+}
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+    ifconfig $NSIM_NETDEV up
+
+    overflow_table0 "overflow NIC table"
+    overflow_table1 "overflow NIC table"
+
+    msg="replace VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
+    del_dev vxlan1
+
+    msg="vacate VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
+    del_dev vxlan2
+
+    msg="replace GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` )
+    del_dev gnv1
+
+    msg="vacate GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` )
+    del_dev gnv2
+
+    msg="table sharing - share"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` )
+    new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external"
+
+    msg="table sharing - overflow"
+    new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external"
+    msg="table sharing - overflow v6"
+    new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external"
+
+    exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` )
+    del_dev gnv4
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# Sync all
+pfx="sync all"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+echo 1 > $NSIM_DEV_DFS/udp_ports_sync_all
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+    ifconfig $NSIM_NETDEV up
+
+    overflow_table0 "overflow NIC table"
+    overflow_table1 "overflow NIC table"
+
+    msg="replace VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
+    del_dev vxlan1
+
+    msg="vacate VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
+    del_dev vxlan2
+
+    msg="replace GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` )
+    del_dev gnv1
+
+    msg="vacate GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` )
+    del_dev gnv2
+
+    msg="table sharing - share"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` )
+    new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external"
+
+    msg="table sharing - overflow"
+    new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external"
+    msg="table sharing - overflow v6"
+    new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external"
+
+    exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` )
+    del_dev gnv4
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# Destroy full NIC
+pfx="destroy full"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+    ifconfig $NSIM_NETDEV up
+
+    overflow_table0 "destroy NIC"
+    overflow_table1 "destroy NIC"
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# IPv4 only
+pfx="IPv4 only"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+echo 1 > $NSIM_DEV_DFS/udp_ports_ipv4_only
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+    ifconfig $NSIM_NETDEV up
+
+    msg="create VxLANs v6"
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="create VxLANs v6"
+    new_vxlan vxlanA1 10000 $NSIM_NETDEV 6
+
+    ip link set dev vxlanA0 down
+    ip link set dev vxlanA0 up
+    check_tables
+
+    msg="create VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="down VxLANs v4"
+    exp0=( 0 0 0 0 )
+    ip link set dev vxlan0 down
+    check_tables
+
+    msg="up VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    ip link set dev vxlan0 up
+    check_tables
+
+    msg="destroy VxLANs v4"
+    exp0=( 0 0 0 0 )
+    del_dev vxlan0
+
+    msg="recreate VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    del_dev vxlanA0
+    del_dev vxlanA1
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# Failures
+pfx="error injection"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+    ifconfig $NSIM_NETDEV up
+
+    echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+
+    msg="1 - create VxLANs v6"
+    exp0=( 0 0 0 0 )
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="1 - create VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="1 - remove VxLANs v4"
+    del_dev vxlan0
+
+    msg="1 - remove VxLANs v6"
+    exp0=( 0 0 0 0 )
+    del_dev vxlanA0
+
+    msg="2 - create GENEVE"
+    exp1=( `mke 20000 2` 0 0 0 )
+    new_geneve gnv0 20000
+
+    msg="2 - destroy GENEVE"
+    echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+    exp1=( `mke 20000 2` 0 0 0 )
+    del_dev gnv0
+
+    msg="2 - create second GENEVE"
+    exp1=( 0 `mke 20001 2` 0 0 )
+    new_geneve gnv0 20001
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# netdev flags
+pfx="netdev flags"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+    ifconfig $NSIM_NETDEV up
+
+    msg="create VxLANs v6"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="create VxLANs v4"
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="turn off"
+    exp0=( 0 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
+    check_tables
+
+    msg="turn on"
+    exp0=( `mke 10000 1` 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
+    check_tables
+
+    msg="remove both"
+    del_dev vxlanA0
+    exp0=( 0 0 0 0 )
+    del_dev vxlan0
+    check_tables
+
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
+
+    msg="create VxLANs v4 - off"
+    exp0=( 0 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="created off - turn on"
+    exp0=( `mke 10000 1` 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
+    check_tables
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# device initiated reset
+pfx="reset notification"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+    ifconfig $NSIM_NETDEV up
+
+    msg="create VxLANs v6"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="create VxLANs v4"
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    check_tables
+
+    msg="NIC device goes down"
+    ifconfig $NSIM_NETDEV down
+    if [ $port -eq 1 ]; then
+	exp0=( 0 0 0 0 )
+	exp1=( 0 0 0 0 )
+    fi
+    check_tables
+
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    check_tables
+
+    msg="NIC device goes up again"
+    ifconfig $NSIM_NETDEV up
+    exp0=( `mke 10000 1` 0 0 0 )
+    check_tables
+
+    msg="remove both"
+    del_dev vxlanA0
+    exp0=( 0 0 0 0 )
+    del_dev vxlan0
+    check_tables
+
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    check_tables
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# shared port tables
+pfx="table sharing"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+echo 0 > $NSIM_DEV_DFS/udp_ports_open_only
+echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+echo 1 > $NSIM_DEV_DFS/udp_ports_shared
+
+old_netdevs=$(ls /sys/class/net)
+echo 1 > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV=`get_netdev_name old_netdevs`
+old_netdevs=$(ls /sys/class/net)
+echo 2 > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV2=`get_netdev_name old_netdevs`
+
+msg="VxLAN v4 devices"
+exp0=( `mke 4789 1` 0 0 0 )
+exp1=( 0 0 0 0 )
+new_vxlan vxlan0 4789 $NSIM_NETDEV
+new_vxlan vxlan1 4789 $NSIM_NETDEV2
+
+msg="VxLAN v4 devices go down"
+exp0=( 0 0 0 0 )
+ifconfig vxlan1 down
+ifconfig vxlan0 down
+check_tables
+
+for ifc in vxlan0 vxlan1; do
+    ifconfig $ifc up
+done
+
+msg="VxLAN v6 device"
+exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+new_vxlan vxlanC 4790 $NSIM_NETDEV 6
+
+msg="Geneve device"
+exp1=( `mke 6081 2` 0 0 0 )
+new_geneve gnv0 6081
+
+msg="NIC device goes down"
+ifconfig $NSIM_NETDEV down
+check_tables
+
+msg="NIC device goes up again"
+ifconfig $NSIM_NETDEV up
+check_tables
+
+for i in `seq 2`; do
+    msg="turn feature off - 1, rep $i"
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
+    check_tables
+
+    msg="turn feature off - 2, rep $i"
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+    ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload off
+    check_tables
+
+    msg="turn feature on - 1, rep $i"
+    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+    exp1=( `mke 6081 2` 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
+    check_tables
+
+    msg="turn feature on - 2, rep $i"
+    ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload on
+    check_tables
+done
+
+msg="tunnels destroyed 1"
+cleanup_tuns
+exp0=( 0 0 0 0 )
+exp1=( 0 0 0 0 )
+check_tables
+
+overflow_table0 "overflow NIC table"
+
+msg="re-add a port"
+
+echo 2 > $NSIM_DEV_SYS/del_port
+echo 2 > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV=`get_netdev_name old_netdevs`
+check_tables
+
+msg="replace VxLAN in overflow table"
+exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
+del_dev vxlan1
+
+msg="vacate VxLAN in overflow table"
+exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
+del_dev vxlan2
+
+echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+check_tables
+
+msg="tunnels destroyed 2"
+cleanup_tuns
+exp0=( 0 0 0 0 )
+exp1=( 0 0 0 0 )
+check_tables
+
+echo 1 > $NSIM_DEV_SYS/del_port
+echo 2 > $NSIM_DEV_SYS/del_port
+
+cleanup_nsim
+
+# Static IANA port
+pfx="static IANA vxlan"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+echo 1 > $NSIM_DEV_DFS/udp_ports_static_iana_vxlan
+STATIC_ENTRIES=( `mke 4789 1` )
+
+port=1
+old_netdevs=$(ls /sys/class/net)
+echo $port > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV=`get_netdev_name old_netdevs`
+
+msg="check empty"
+exp0=( 0 0 0 0 )
+exp1=( 0 0 0 0 )
+check_tables
+
+msg="add on static port"
+new_vxlan vxlan0 4789 $NSIM_NETDEV
+new_vxlan vxlan1 4789 $NSIM_NETDEV
+
+msg="add on different port"
+exp0=( `mke 4790 1` 0 0 0 )
+new_vxlan vxlan2 4790 $NSIM_NETDEV
+
+cleanup_tuns
+
+msg="tunnels destroyed"
+exp0=( 0 0 0 0 )
+exp1=( 0 0 0 0 )
+check_tables
+
+msg="different type"
+new_geneve gnv0	4789
+
+cleanup_tuns
+cleanup_nsim
+
+# END
+
+modprobe -r netdevsim
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $num_cases checks"
+else
+    echo "FAILED $num_errors/$num_cases checks"
+fi
+
+exit $EXIT_STATUS