Merging upstream version 6.8.9.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 89 insertions, 8 deletions

diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config
index 70638fa50b..899d7fb6ea 100644
--- a/tools/testing/selftests/drivers/net/bonding/config
+++ b/tools/testing/selftests/drivers/net/bonding/config
@@ -1,2 +1,10 @@
 CONFIG_BONDING=y
+CONFIG_BRIDGE=y
+CONFIG_DUMMY=y
+CONFIG_IPV6=y
 CONFIG_MACVLAN=y
+CONFIG_NET_ACT_GACT=y
+CONFIG_NET_CLS_FLOWER=y
+CONFIG_NET_SCH_INGRESS=y
+CONFIG_NLMON=y
+CONFIG_VETH=y
diff --git a/tools/testing/selftests/drivers/net/mlxsw/pci_reset.sh b/tools/testing/selftests/drivers/net/mlxsw/pci_reset.sh
new file mode 100755
index 0000000000..fe0343b95e
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/pci_reset.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test that PCI reset works correctly by verifying that only the expected reset
+# methods are supported and that after issuing the reset the ifindex of the
+# port changes.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	pci_reset_test
+"
+NUM_NETIFS=1
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+pci_reset_test()
+{
+	RET=0
+
+	local bus=$(echo $DEVLINK_DEV | cut -d '/' -f 1)
+	local bdf=$(echo $DEVLINK_DEV | cut -d '/' -f 2)
+
+	if [ $bus != "pci" ]; then
+		check_err 1 "devlink device is not a PCI device"
+		log_test "pci reset"
+		return
+	fi
+
+	if [ ! -f /sys/bus/pci/devices/$bdf/reset_method ]; then
+		check_err 1 "reset is not supported"
+		log_test "pci reset"
+		return
+	fi
+
+	[[ $(cat /sys/bus/pci/devices/$bdf/reset_method) == "bus" ]]
+	check_err $? "only \"bus\" reset method should be supported"
+
+	local ifindex_pre=$(ip -j link show dev $swp1 | jq '.[]["ifindex"]')
+
+	echo 1 > /sys/bus/pci/devices/$bdf/reset
+	check_err $? "reset failed"
+
+	# Wait for udev to rename newly created netdev.
+	udevadm settle
+
+	local ifindex_post=$(ip -j link show dev $swp1 | jq '.[]["ifindex"]')
+
+	[[ $ifindex_pre != $ifindex_post ]]
+	check_err $? "reset not performed"
+
+	log_test "pci reset"
+}
+
+swp1=${NETIFS[p1]}
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh
index e71d811656..0f0f4f0580 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh
@@ -40,7 +40,6 @@
 # |   + $swp1          $swp3 +                    + $swp4                     |
 # |   | iPOOL1        iPOOL0 |                    | iPOOL2                    |
 # |   | ePOOL4        ePOOL5 |                    | ePOOL4                    |
-# |   |                1Gbps |                    | 1Gbps                     |
 # |   |        PFC:enabled=1 |                    | PFC:enabled=1             |
 # | +-|----------------------|-+                +-|------------------------+  |
 # | | + $swp1.111  $swp3.111 + |                | + $swp4.111              |  |
diff --git a/tools/testing/selftests/drivers/net/netdevsim/config b/tools/testing/selftests/drivers/net/netdevsim/config
new file mode 100644
index 0000000000..adf45a3a78
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/config
@@ -0,0 +1,10 @@
+CONFIG_DUMMY=y
+CONFIG_GENEVE=m
+CONFIG_IPV6=y
+CONFIG_NETDEVSIM=m
+CONFIG_NET_SCH_MQPRIO=y
+CONFIG_NET_SCH_MULTIQ=y
+CONFIG_NET_SCH_PRIO=y
+CONFIG_PSAMPLE=y
+CONFIG_PTP_1588_CLOCK_MOCK=y
+CONFIG_VXLAN=m
diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh
index 922744059a..80160579e0 100644
--- a/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh
+++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh
@@ -51,6 +51,7 @@ function make_netdev {
     fi
 
     echo $NSIM_ID $@ > /sys/bus/netdevsim/new_device
+    udevadm settle
     # get new device name
     ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/
 }
diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh
index 0c56746e9c..7d7829f575 100755
--- a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh
+++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh
@@ -8,16 +8,20 @@ NSIM_NETDEV=$(make_netdev)
 
 set -o pipefail
 
+# Since commit 2b3ddcb35357 ("ethtool: fec: Change the prompt ...")
+# in ethtool CLI the Configured lines start with Supported/Configured.
+configured=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2 | head -1 | cut -d' ' -f1)
+
 # netdevsim starts out with None/None
 s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
-check $? "$s" "Configured FEC encodings: None
+check $? "$s" "$configured FEC encodings: None
 Active FEC encoding: None"
 
 # Test Auto
 $ETHTOOL --set-fec $NSIM_NETDEV encoding auto
 check $?
 s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
-check $? "$s" "Configured FEC encodings: Auto
+check $? "$s" "$configured FEC encodings: Auto
 Active FEC encoding: Off"
 
 # Test case in-sensitivity
@@ -25,7 +29,7 @@ for o in off Off OFF; do
     $ETHTOOL --set-fec $NSIM_NETDEV encoding $o
     check $?
     s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
-    check $? "$s" "Configured FEC encodings: Off
+    check $? "$s" "$configured FEC encodings: Off
 Active FEC encoding: Off"
 done
 
@@ -33,7 +37,7 @@ for o in BaseR baser BAser; do
     $ETHTOOL --set-fec $NSIM_NETDEV encoding $o
     check $?
     s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
-    check $? "$s" "Configured FEC encodings: BaseR
+    check $? "$s" "$configured FEC encodings: BaseR
 Active FEC encoding: BaseR"
 done
 
@@ -41,7 +45,7 @@ for o in llrs rs; do
     $ETHTOOL --set-fec $NSIM_NETDEV encoding $o
     check $?
     s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
-    check $? "$s" "Configured FEC encodings: ${o^^}
+    check $? "$s" "$configured FEC encodings: ${o^^}
 Active FEC encoding: ${o^^}"
 done
 
@@ -49,13 +53,13 @@ done
 $ETHTOOL --set-fec $NSIM_NETDEV encoding rs llrs
 check $?
 s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
-check $? "$s" "Configured FEC encodings: RS LLRS
+check $? "$s" "$configured FEC encodings: RS LLRS
 Active FEC encoding: LLRS"
 
 $ETHTOOL --set-fec $NSIM_NETDEV encoding rs off auto
 check $?
 s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2)
-check $? "$s" "Configured FEC encodings: Auto Off RS
+check $? "$s" "$configured FEC encodings: Auto Off RS
 Active FEC encoding: RS"
 
 # Make sure other link modes are rejected
diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
index 185b02d2d4..f98435c502 100755
--- a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
+++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
@@ -233,6 +233,7 @@ function print_tables {
 function get_netdev_name {
     local -n old=$1
 
+    udevadm settle
     new=$(ls /sys/class/net)
 
     for netdev in $new; do