Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1485 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh
new file mode 100755
index 000000000..488f49643
--- /dev/null
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -0,0 +1,1485 @@
+#!/bin/bash
+#
+# This test is for checking rtnetlink callpaths, and get as much coverage as possible.
+#
+# set -e
+
+ALL_TESTS="
+	kci_test_polrouting
+	kci_test_route_get
+	kci_test_addrlft
+	kci_test_promote_secondaries
+	kci_test_tc
+	kci_test_gre
+	kci_test_gretap
+	kci_test_ip6gretap
+	kci_test_erspan
+	kci_test_ip6erspan
+	kci_test_bridge
+	kci_test_addrlabel
+	kci_test_ifalias
+	kci_test_vrf
+	kci_test_encap
+	kci_test_macsec
+	kci_test_macsec_offload
+	kci_test_ipsec
+	kci_test_ipsec_offload
+	kci_test_fdb_get
+	kci_test_neigh_get
+	kci_test_bridge_parent_id
+	kci_test_address_proto
+"
+
+devdummy="test-dummy0"
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# set global exit status, but never reset nonzero one.
+check_err()
+{
+	if [ $ret -eq 0 ]; then
+		ret=$1
+	fi
+}
+
+# same but inverted -- used when command must fail for test to pass
+check_fail()
+{
+	if [ $1 -eq 0 ]; then
+		ret=1
+	fi
+}
+
+kci_add_dummy()
+{
+	ip link add name "$devdummy" type dummy
+	check_err $?
+	ip link set "$devdummy" up
+	check_err $?
+}
+
+kci_del_dummy()
+{
+	ip link del dev "$devdummy"
+	check_err $?
+}
+
+kci_test_netconf()
+{
+	dev="$1"
+	r=$ret
+
+	ip netconf show dev "$dev" > /dev/null
+	check_err $?
+
+	for f in 4 6; do
+		ip -$f netconf show dev "$dev" > /dev/null
+		check_err $?
+	done
+
+	if [ $ret -ne 0 ] ;then
+		echo "FAIL: ip netconf show $dev"
+		test $r -eq 0 && ret=0
+		return 1
+	fi
+}
+
+# add a bridge with vlans on top
+kci_test_bridge()
+{
+	devbr="test-br0"
+	vlandev="testbr-vlan1"
+
+	local ret=0
+	ip link add name "$devbr" type bridge
+	check_err $?
+
+	ip link set dev "$devdummy" master "$devbr"
+	check_err $?
+
+	ip link set "$devbr" up
+	check_err $?
+
+	ip link add link "$devbr" name "$vlandev" type vlan id 1
+	check_err $?
+	ip addr add dev "$vlandev" 10.200.7.23/30
+	check_err $?
+	ip -6 addr add dev "$vlandev" dead:42::1234/64
+	check_err $?
+	ip -d link > /dev/null
+	check_err $?
+	ip r s t all > /dev/null
+	check_err $?
+
+	for name in "$devbr" "$vlandev" "$devdummy" ; do
+		kci_test_netconf "$name"
+	done
+
+	ip -6 addr del dev "$vlandev" dead:42::1234/64
+	check_err $?
+
+	ip link del dev "$vlandev"
+	check_err $?
+	ip link del dev "$devbr"
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: bridge setup"
+		return 1
+	fi
+	echo "PASS: bridge setup"
+
+}
+
+kci_test_gre()
+{
+	gredev=neta
+	rem=10.42.42.1
+	loc=10.0.0.1
+
+	local ret=0
+	ip tunnel add $gredev mode gre remote $rem local $loc ttl 1
+	check_err $?
+	ip link set $gredev up
+	check_err $?
+	ip addr add 10.23.7.10 dev $gredev
+	check_err $?
+	ip route add 10.23.8.0/30 dev $gredev
+	check_err $?
+	ip addr add dev "$devdummy" 10.23.7.11/24
+	check_err $?
+	ip link > /dev/null
+	check_err $?
+	ip addr > /dev/null
+	check_err $?
+
+	kci_test_netconf "$gredev"
+
+	ip addr del dev "$devdummy" 10.23.7.11/24
+	check_err $?
+
+	ip link del $gredev
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: gre tunnel endpoint"
+		return 1
+	fi
+	echo "PASS: gre tunnel endpoint"
+}
+
+# tc uses rtnetlink too, for full tc testing
+# please see tools/testing/selftests/tc-testing.
+kci_test_tc()
+{
+	dev=lo
+	local ret=0
+
+	tc qdisc add dev "$dev" root handle 1: htb
+	check_err $?
+	tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit
+	check_err $?
+	tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256
+	check_err $?
+	tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256
+	check_err $?
+	tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256
+	check_err $?
+	tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10
+	check_err $?
+	tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10
+	check_err $?
+	tc filter show dev "$dev" parent  1:0 > /dev/null
+	check_err $?
+	tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32
+	check_err $?
+	tc filter show dev "$dev" parent  1:0 > /dev/null
+	check_err $?
+	tc qdisc del dev "$dev" root handle 1: htb
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: tc htb hierarchy"
+		return 1
+	fi
+	echo "PASS: tc htb hierarchy"
+
+}
+
+kci_test_polrouting()
+{
+	local ret=0
+	ip rule add fwmark 1 lookup 100
+	check_err $?
+	ip route add local 0.0.0.0/0 dev lo table 100
+	check_err $?
+	ip r s t all > /dev/null
+	check_err $?
+	ip rule del fwmark 1 lookup 100
+	check_err $?
+	ip route del local 0.0.0.0/0 dev lo table 100
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: policy route test"
+		return 1
+	fi
+	echo "PASS: policy routing"
+}
+
+kci_test_route_get()
+{
+	local hash_policy=$(sysctl -n net.ipv4.fib_multipath_hash_policy)
+
+	local ret=0
+
+	ip route get 127.0.0.1 > /dev/null
+	check_err $?
+	ip route get 127.0.0.1 dev "$devdummy" > /dev/null
+	check_err $?
+	ip route get ::1 > /dev/null
+	check_err $?
+	ip route get fe80::1 dev "$devdummy" > /dev/null
+	check_err $?
+	ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x10 mark 0x1 > /dev/null
+	check_err $?
+	ip route get ::1 from ::1 iif lo oif lo tos 0x10 mark 0x1 > /dev/null
+	check_err $?
+	ip addr add dev "$devdummy" 10.23.7.11/24
+	check_err $?
+	ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy" > /dev/null
+	check_err $?
+	ip route add 10.23.8.0/24 \
+		nexthop via 10.23.7.13 dev "$devdummy" \
+		nexthop via 10.23.7.14 dev "$devdummy"
+	check_err $?
+	sysctl -wq net.ipv4.fib_multipath_hash_policy=0
+	ip route get 10.23.8.11 > /dev/null
+	check_err $?
+	sysctl -wq net.ipv4.fib_multipath_hash_policy=1
+	ip route get 10.23.8.11 > /dev/null
+	check_err $?
+	sysctl -wq net.ipv4.fib_multipath_hash_policy="$hash_policy"
+	ip route del 10.23.8.0/24
+	check_err $?
+	ip addr del dev "$devdummy" 10.23.7.11/24
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: route get"
+		return 1
+	fi
+
+	echo "PASS: route get"
+}
+
+kci_test_addrlft()
+{
+	for i in $(seq 10 100) ;do
+		lft=$(((RANDOM%3) + 1))
+		ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1))
+		check_err $?
+	done
+
+	sleep 5
+
+	ip addr show dev "$devdummy" | grep "10.23.11."
+	if [ $? -eq 0 ]; then
+		echo "FAIL: preferred_lft addresses remaining"
+		check_err 1
+		return
+	fi
+
+	echo "PASS: preferred_lft addresses have expired"
+}
+
+kci_test_promote_secondaries()
+{
+	promote=$(sysctl -n net.ipv4.conf.$devdummy.promote_secondaries)
+
+	sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=1
+
+	for i in $(seq 2 254);do
+		IP="10.23.11.$i"
+		ip -f inet addr add $IP/16 brd + dev "$devdummy"
+		ifconfig "$devdummy" $IP netmask 255.255.0.0
+	done
+
+	ip addr flush dev "$devdummy"
+
+	[ $promote -eq 0 ] && sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=0
+
+	echo "PASS: promote_secondaries complete"
+}
+
+kci_test_addrlabel()
+{
+	local ret=0
+
+	ip addrlabel add prefix dead::/64 dev lo label 1
+	check_err $?
+
+	ip addrlabel list |grep -q "prefix dead::/64 dev lo label 1"
+	check_err $?
+
+	ip addrlabel del prefix dead::/64 dev lo label 1 2> /dev/null
+	check_err $?
+
+	ip addrlabel add prefix dead::/64 label 1 2> /dev/null
+	check_err $?
+
+	ip addrlabel del prefix dead::/64 label 1 2> /dev/null
+	check_err $?
+
+	# concurrent add/delete
+	for i in $(seq 1 1000); do
+		ip addrlabel add prefix 1c3::/64 label 12345 2>/dev/null
+	done &
+
+	for i in $(seq 1 1000); do
+		ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null
+	done
+
+	wait
+
+	ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: ipv6 addrlabel"
+		return 1
+	fi
+
+	echo "PASS: ipv6 addrlabel"
+}
+
+kci_test_ifalias()
+{
+	local ret=0
+	namewant=$(uuidgen)
+	syspathname="/sys/class/net/$devdummy/ifalias"
+
+	ip link set dev "$devdummy" alias "$namewant"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: cannot set interface alias of $devdummy to $namewant"
+		return 1
+	fi
+
+	ip link show "$devdummy" | grep -q "alias $namewant"
+	check_err $?
+
+	if [ -r "$syspathname" ] ; then
+		read namehave < "$syspathname"
+		if [ "$namewant" != "$namehave" ]; then
+			echo "FAIL: did set ifalias $namewant but got $namehave"
+			return 1
+		fi
+
+		namewant=$(uuidgen)
+		echo "$namewant" > "$syspathname"
+	        ip link show "$devdummy" | grep -q "alias $namewant"
+		check_err $?
+
+		# sysfs interface allows to delete alias again
+		echo "" > "$syspathname"
+
+	        ip link show "$devdummy" | grep -q "alias $namewant"
+		check_fail $?
+
+		for i in $(seq 1 100); do
+			uuidgen > "$syspathname" &
+		done
+
+		wait
+
+		# re-add the alias -- kernel should free mem when dummy dev is removed
+		ip link set dev "$devdummy" alias "$namewant"
+		check_err $?
+	fi
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: set interface alias $devdummy to $namewant"
+		return 1
+	fi
+
+	echo "PASS: set ifalias $namewant for $devdummy"
+}
+
+kci_test_vrf()
+{
+	vrfname="test-vrf"
+	local ret=0
+
+	ip link show type vrf 2>/dev/null
+	if [ $? -ne 0 ]; then
+		echo "SKIP: vrf: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip link add "$vrfname" type vrf table 10
+	check_err $?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: can't add vrf interface, skipping test"
+		return 0
+	fi
+
+	ip -br link show type vrf | grep -q "$vrfname"
+	check_err $?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: created vrf device not found"
+		return 1
+	fi
+
+	ip link set dev "$vrfname" up
+	check_err $?
+
+	ip link set dev "$devdummy" master "$vrfname"
+	check_err $?
+	ip link del dev "$vrfname"
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: vrf"
+		return 1
+	fi
+
+	echo "PASS: vrf"
+}
+
+kci_test_encap_vxlan()
+{
+	local ret=0
+	vxlan="test-vxlan0"
+	vlan="test-vlan0"
+	testns="$1"
+
+	ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \
+		dev "$devdummy" dstport 4789 2>/dev/null
+	if [ $? -ne 0 ]; then
+		echo "FAIL: can't add vxlan interface, skipping test"
+		return 0
+	fi
+	check_err $?
+
+	ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan"
+	check_err $?
+
+	ip -netns "$testns" link set up dev "$vxlan"
+	check_err $?
+
+	ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1
+	check_err $?
+
+	# changelink testcases
+	ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy" 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64
+	check_err $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning
+	check_err $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan proxy 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan norsc 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan external 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan gbp 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan gpe 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link del "$vxlan"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: vxlan"
+		return 1
+	fi
+	echo "PASS: vxlan"
+}
+
+kci_test_encap_fou()
+{
+	local ret=0
+	name="test-fou"
+	testns="$1"
+
+	ip fou help 2>&1 |grep -q 'Usage: ip fou'
+	if [ $? -ne 0 ];then
+		echo "SKIP: fou: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	if ! /sbin/modprobe -q -n fou; then
+		echo "SKIP: module fou is not found"
+		return $ksft_skip
+	fi
+	/sbin/modprobe -q fou
+	ip -netns "$testns" fou add port 7777 ipproto 47 2>/dev/null
+	if [ $? -ne 0 ];then
+		echo "FAIL: can't add fou port 7777, skipping test"
+		return 1
+	fi
+
+	ip -netns "$testns" fou add port 8888 ipproto 4
+	check_err $?
+
+	ip -netns "$testns" fou del port 9999 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" fou del port 7777
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: fou"
+		return 1
+	fi
+
+	echo "PASS: fou"
+}
+
+# test various encap methods, use netns to avoid unwanted interference
+kci_test_encap()
+{
+	testns="testns"
+	local ret=0
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP encap tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	ip -netns "$testns" link set lo up
+	check_err $?
+
+	ip -netns "$testns" link add name "$devdummy" type dummy
+	check_err $?
+	ip -netns "$testns" link set "$devdummy" up
+	check_err $?
+
+	kci_test_encap_vxlan "$testns"
+	check_err $?
+	kci_test_encap_fou "$testns"
+	check_err $?
+
+	ip netns del "$testns"
+	return $ret
+}
+
+kci_test_macsec()
+{
+	msname="test_macsec0"
+	local ret=0
+
+	ip macsec help 2>&1 | grep -q "^Usage: ip macsec"
+	if [ $? -ne 0 ]; then
+		echo "SKIP: macsec: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on
+	check_err $?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: can't add macsec interface, skipping test"
+		return 1
+	fi
+
+	ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
+	check_err $?
+
+	ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
+	check_err $?
+
+	ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef
+	check_err $?
+
+	ip macsec show > /dev/null
+	check_err $?
+
+	ip link del dev "$msname"
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: macsec"
+		return 1
+	fi
+
+	echo "PASS: macsec"
+}
+
+kci_test_macsec_offload()
+{
+	sysfsd=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/
+	sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/
+	probed=false
+	local ret=0
+
+	ip macsec help 2>&1 | grep -q "^Usage: ip macsec"
+	if [ $? -ne 0 ]; then
+		echo "SKIP: macsec: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	# setup netdevsim since dummydev doesn't have offload support
+	if [ ! -w /sys/bus/netdevsim/new_device ] ; then
+		modprobe -q netdevsim
+		check_err $?
+		if [ $ret -ne 0 ]; then
+			echo "SKIP: macsec_offload can't load netdevsim"
+			return $ksft_skip
+		fi
+		probed=true
+	fi
+
+	echo "0" > /sys/bus/netdevsim/new_device
+	while [ ! -d $sysfsnet ] ; do :; done
+	udevadm settle
+	dev=`ls $sysfsnet`
+
+	ip link set $dev up
+	if [ ! -d $sysfsd ] ; then
+		echo "FAIL: macsec_offload can't create device $dev"
+		return 1
+	fi
+
+	ethtool -k $dev | grep -q 'macsec-hw-offload: on'
+	if [ $? -eq 1 ] ; then
+		echo "FAIL: macsec_offload netdevsim doesn't support MACsec offload"
+		return 1
+	fi
+
+	ip link add link $dev kci_macsec1 type macsec port 4 offload mac
+	check_err $?
+
+	ip link add link $dev kci_macsec2 type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac
+	check_err $?
+
+	ip link add link $dev kci_macsec3 type macsec sci abbacdde01020304 offload mac
+	check_err $?
+
+	ip link add link $dev kci_macsec4 type macsec port 8 offload mac 2> /dev/null
+	check_fail $?
+
+	msname=kci_macsec1
+
+	ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
+	check_err $?
+
+	ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
+	check_err $?
+
+	ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \
+		key 00 0123456789abcdef0123456789abcdef
+	check_err $?
+
+	ip macsec add "$msname" rx port 1235 address "1c:ed:de:ad:be:ef" 2> /dev/null
+	check_fail $?
+
+	# clean up any leftovers
+	for msdev in kci_macsec{1,2,3,4} ; do
+	    ip link del $msdev 2> /dev/null
+	done
+	echo 0 > /sys/bus/netdevsim/del_device
+	$probed && rmmod netdevsim
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: macsec_offload"
+		return 1
+	fi
+	echo "PASS: macsec_offload"
+}
+
+#-------------------------------------------------------------------
+# Example commands
+#   ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07 replay-window 32 \
+#            aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \
+#            sel src 14.0.0.52/24 dst 14.0.0.70/24
+#   ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \
+#            tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07
+#
+# Subcommands not tested
+#    ip x s update
+#    ip x s allocspi
+#    ip x s deleteall
+#    ip x p update
+#    ip x p deleteall
+#    ip x p set
+#-------------------------------------------------------------------
+kci_test_ipsec()
+{
+	local ret=0
+	algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128"
+	srcip=192.168.123.1
+	dstip=192.168.123.2
+	spi=7
+
+	ip addr add $srcip dev $devdummy
+
+	# flush to be sure there's nothing configured
+	ip x s flush ; ip x p flush
+	check_err $?
+
+	# start the monitor in the background
+	tmpfile=`mktemp /var/run/ipsectestXXX`
+	mpid=`(ip x m > $tmpfile & echo $!) 2>/dev/null`
+	sleep 0.2
+
+	ipsecid="proto esp src $srcip dst $dstip spi 0x07"
+	ip x s add $ipsecid \
+            mode transport reqid 0x07 replay-window 32 \
+            $algo sel src $srcip/24 dst $dstip/24
+	check_err $?
+
+	lines=`ip x s list | grep $srcip | grep $dstip | wc -l`
+	test $lines -eq 2
+	check_err $?
+
+	ip x s count | grep -q "SAD count 1"
+	check_err $?
+
+	lines=`ip x s get $ipsecid | grep $srcip | grep $dstip | wc -l`
+	test $lines -eq 2
+	check_err $?
+
+	ip x s delete $ipsecid
+	check_err $?
+
+	lines=`ip x s list | wc -l`
+	test $lines -eq 0
+	check_err $?
+
+	ipsecsel="dir out src $srcip/24 dst $dstip/24"
+	ip x p add $ipsecsel \
+		    tmpl proto esp src $srcip dst $dstip \
+		    spi 0x07 mode transport reqid 0x07
+	check_err $?
+
+	lines=`ip x p list | grep $srcip | grep $dstip | wc -l`
+	test $lines -eq 2
+	check_err $?
+
+	ip x p count | grep -q "SPD IN  0 OUT 1 FWD 0"
+	check_err $?
+
+	lines=`ip x p get $ipsecsel | grep $srcip | grep $dstip | wc -l`
+	test $lines -eq 2
+	check_err $?
+
+	ip x p delete $ipsecsel
+	check_err $?
+
+	lines=`ip x p list | wc -l`
+	test $lines -eq 0
+	check_err $?
+
+	# check the monitor results
+	kill $mpid
+	lines=`wc -l $tmpfile | cut "-d " -f1`
+	test $lines -eq 20
+	check_err $?
+	rm -rf $tmpfile
+
+	# clean up any leftovers
+	ip x s flush
+	check_err $?
+	ip x p flush
+	check_err $?
+	ip addr del $srcip/32 dev $devdummy
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ipsec"
+		return 1
+	fi
+	echo "PASS: ipsec"
+}
+
+#-------------------------------------------------------------------
+# Example commands
+#   ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07 replay-window 32 \
+#            aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \
+#            sel src 14.0.0.52/24 dst 14.0.0.70/24
+#            offload dev sim1 dir out
+#   ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \
+#            tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07
+#
+#-------------------------------------------------------------------
+kci_test_ipsec_offload()
+{
+	local ret=0
+	algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128"
+	srcip=192.168.123.3
+	dstip=192.168.123.4
+	sysfsd=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/
+	sysfsf=$sysfsd/ipsec
+	sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/
+	probed=false
+
+	# setup netdevsim since dummydev doesn't have offload support
+	if [ ! -w /sys/bus/netdevsim/new_device ] ; then
+		modprobe -q netdevsim
+		check_err $?
+		if [ $ret -ne 0 ]; then
+			echo "SKIP: ipsec_offload can't load netdevsim"
+			return $ksft_skip
+		fi
+		probed=true
+	fi
+
+	echo "0" > /sys/bus/netdevsim/new_device
+	while [ ! -d $sysfsnet ] ; do :; done
+	udevadm settle
+	dev=`ls $sysfsnet`
+
+	ip addr add $srcip dev $dev
+	ip link set $dev up
+	if [ ! -d $sysfsd ] ; then
+		echo "FAIL: ipsec_offload can't create device $dev"
+		return 1
+	fi
+	if [ ! -f $sysfsf ] ; then
+		echo "FAIL: ipsec_offload netdevsim doesn't support IPsec offload"
+		return 1
+	fi
+
+	# flush to be sure there's nothing configured
+	ip x s flush ; ip x p flush
+
+	# create offloaded SAs, both in and out
+	ip x p add dir out src $srcip/24 dst $dstip/24 \
+	    tmpl proto esp src $srcip dst $dstip spi 9 \
+	    mode transport reqid 42
+	check_err $?
+	ip x p add dir in src $dstip/24 dst $srcip/24 \
+	    tmpl proto esp src $dstip dst $srcip spi 9 \
+	    mode transport reqid 42
+	check_err $?
+
+	ip x s add proto esp src $srcip dst $dstip spi 9 \
+	    mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \
+	    offload dev $dev dir out
+	check_err $?
+	ip x s add proto esp src $dstip dst $srcip spi 9 \
+	    mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \
+	    offload dev $dev dir in
+	check_err $?
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ipsec_offload can't create SA"
+		return 1
+	fi
+
+	# does offload show up in ip output
+	lines=`ip x s list | grep -c "crypto offload parameters: dev $dev dir"`
+	if [ $lines -ne 2 ] ; then
+		echo "FAIL: ipsec_offload SA offload missing from list output"
+		check_err 1
+	fi
+
+	# use ping to exercise the Tx path
+	ping -I $dev -c 3 -W 1 -i 0 $dstip >/dev/null
+
+	# does driver have correct offload info
+	diff $sysfsf - << EOF
+SA count=2 tx=3
+sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000
+sa[0]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
+sa[0]    key=0x34333231 38373635 32313039 36353433
+sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
+sa[1]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
+sa[1]    key=0x34333231 38373635 32313039 36353433
+EOF
+	if [ $? -ne 0 ] ; then
+		echo "FAIL: ipsec_offload incorrect driver data"
+		check_err 1
+	fi
+
+	# does offload get removed from driver
+	ip x s flush
+	ip x p flush
+	lines=`grep -c "SA count=0" $sysfsf`
+	if [ $lines -ne 1 ] ; then
+		echo "FAIL: ipsec_offload SA not removed from driver"
+		check_err 1
+	fi
+
+	# clean up any leftovers
+	echo 0 > /sys/bus/netdevsim/del_device
+	$probed && rmmod netdevsim
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ipsec_offload"
+		return 1
+	fi
+	echo "PASS: ipsec_offload"
+}
+
+kci_test_gretap()
+{
+	testns="testns"
+	DEV_NS=gretap00
+	local ret=0
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP gretap tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	ip link help gretap 2>&1 | grep -q "^Usage:"
+	if [ $? -ne 0 ];then
+		echo "SKIP: gretap: iproute2 too old"
+		ip netns del "$testns"
+		return $ksft_skip
+	fi
+
+	# test native tunnel
+	ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \
+		key 102 local 172.16.1.100 remote 172.16.1.200
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test external mode
+	ip -netns "$testns" link add dev "$DEV_NS" type gretap external
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: gretap"
+		ip netns del "$testns"
+		return 1
+	fi
+	echo "PASS: gretap"
+
+	ip netns del "$testns"
+}
+
+kci_test_ip6gretap()
+{
+	testns="testns"
+	DEV_NS=ip6gretap00
+	local ret=0
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP ip6gretap tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	ip link help ip6gretap 2>&1 | grep -q "^Usage:"
+	if [ $? -ne 0 ];then
+		echo "SKIP: ip6gretap: iproute2 too old"
+		ip netns del "$testns"
+		return $ksft_skip
+	fi
+
+	# test native tunnel
+	ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \
+		key 102 local fc00:100::1 remote fc00:100::2
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test external mode
+	ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ip6gretap"
+		ip netns del "$testns"
+		return 1
+	fi
+	echo "PASS: ip6gretap"
+
+	ip netns del "$testns"
+}
+
+kci_test_erspan()
+{
+	testns="testns"
+	DEV_NS=erspan00
+	local ret=0
+
+	ip link help erspan 2>&1 | grep -q "^Usage:"
+	if [ $? -ne 0 ];then
+		echo "SKIP: erspan: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP erspan tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	# test native tunnel erspan v1
+	ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
+		key 102 local 172.16.1.100 remote 172.16.1.200 \
+		erspan_ver 1 erspan 488
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test native tunnel erspan v2
+	ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
+		key 102 local 172.16.1.100 remote 172.16.1.200 \
+		erspan_ver 2 erspan_dir ingress erspan_hwid 7
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test external mode
+	ip -netns "$testns" link add dev "$DEV_NS" type erspan external
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: erspan"
+		ip netns del "$testns"
+		return 1
+	fi
+	echo "PASS: erspan"
+
+	ip netns del "$testns"
+}
+
+kci_test_ip6erspan()
+{
+	testns="testns"
+	DEV_NS=ip6erspan00
+	local ret=0
+
+	ip link help ip6erspan 2>&1 | grep -q "^Usage:"
+	if [ $? -ne 0 ];then
+		echo "SKIP: ip6erspan: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP ip6erspan tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	# test native tunnel ip6erspan v1
+	ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
+		key 102 local fc00:100::1 remote fc00:100::2 \
+		erspan_ver 1 erspan 488
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test native tunnel ip6erspan v2
+	ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
+		key 102 local fc00:100::1 remote fc00:100::2 \
+		erspan_ver 2 erspan_dir ingress erspan_hwid 7
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test external mode
+	ip -netns "$testns" link add dev "$DEV_NS" \
+		type ip6erspan external
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ip6erspan"
+		ip netns del "$testns"
+		return 1
+	fi
+	echo "PASS: ip6erspan"
+
+	ip netns del "$testns"
+}
+
+kci_test_fdb_get()
+{
+	IP="ip -netns testns"
+	BRIDGE="bridge -netns testns"
+	brdev="test-br0"
+	vxlandev="vxlan10"
+	test_mac=de:ad:be:ef:13:37
+	localip="10.0.2.2"
+	dstip="10.0.2.3"
+	local ret=0
+
+	bridge fdb help 2>&1 |grep -q 'bridge fdb get'
+	if [ $? -ne 0 ];then
+		echo "SKIP: fdb get tests: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip netns add testns
+	if [ $? -ne 0 ]; then
+		echo "SKIP fdb get tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	$IP link add "$vxlandev" type vxlan id 10 local $localip \
+                dstport 4789 2>/dev/null
+	check_err $?
+	$IP link add name "$brdev" type bridge &>/dev/null
+	check_err $?
+	$IP link set dev "$vxlandev" master "$brdev" &>/dev/null
+	check_err $?
+	$BRIDGE fdb add $test_mac dev "$vxlandev" master &>/dev/null
+	check_err $?
+	$BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self &>/dev/null
+	check_err $?
+
+	$BRIDGE fdb get $test_mac brport "$vxlandev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
+	check_err $?
+	$BRIDGE fdb get $test_mac br "$brdev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
+	check_err $?
+	$BRIDGE fdb get $test_mac dev "$vxlandev" self 2>/dev/null | grep -q "dev $vxlandev dst $dstip"
+	check_err $?
+
+	ip netns del testns &>/dev/null
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: bridge fdb get"
+		return 1
+	fi
+
+	echo "PASS: bridge fdb get"
+}
+
+kci_test_neigh_get()
+{
+	dstmac=de:ad:be:ef:13:37
+	dstip=10.0.2.4
+	dstip6=dead::2
+	local ret=0
+
+	ip neigh help 2>&1 |grep -q 'ip neigh get'
+	if [ $? -ne 0 ];then
+		echo "SKIP: fdb get tests: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	# ipv4
+	ip neigh add $dstip lladdr $dstmac dev "$devdummy"  > /dev/null
+	check_err $?
+	ip neigh get $dstip dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
+	check_err $?
+	ip neigh del $dstip lladdr $dstmac dev "$devdummy"  > /dev/null
+	check_err $?
+
+	# ipv4 proxy
+	ip neigh add proxy $dstip dev "$devdummy" > /dev/null
+	check_err $?
+	ip neigh get proxy $dstip dev "$devdummy" 2>/dev/null | grep -q "$dstip"
+	check_err $?
+	ip neigh del proxy $dstip dev "$devdummy" > /dev/null
+	check_err $?
+
+	# ipv6
+	ip neigh add $dstip6 lladdr $dstmac dev "$devdummy"  > /dev/null
+	check_err $?
+	ip neigh get $dstip6 dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
+	check_err $?
+	ip neigh del $dstip6 lladdr $dstmac dev "$devdummy"  > /dev/null
+	check_err $?
+
+	# ipv6 proxy
+	ip neigh add proxy $dstip6 dev "$devdummy" > /dev/null
+	check_err $?
+	ip neigh get proxy $dstip6 dev "$devdummy" 2>/dev/null | grep -q "$dstip6"
+	check_err $?
+	ip neigh del proxy $dstip6 dev "$devdummy" > /dev/null
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: neigh get"
+		return 1
+	fi
+
+	echo "PASS: neigh get"
+}
+
+kci_test_bridge_parent_id()
+{
+	local ret=0
+	sysfsnet=/sys/bus/netdevsim/devices/netdevsim
+	probed=false
+
+	if [ ! -w /sys/bus/netdevsim/new_device ] ; then
+		modprobe -q netdevsim
+		check_err $?
+		if [ $ret -ne 0 ]; then
+			echo "SKIP: bridge_parent_id can't load netdevsim"
+			return $ksft_skip
+		fi
+		probed=true
+	fi
+
+	echo "10 1" > /sys/bus/netdevsim/new_device
+	while [ ! -d ${sysfsnet}10 ] ; do :; done
+	echo "20 1" > /sys/bus/netdevsim/new_device
+	while [ ! -d ${sysfsnet}20 ] ; do :; done
+	udevadm settle
+	dev10=`ls ${sysfsnet}10/net/`
+	dev20=`ls ${sysfsnet}20/net/`
+
+	ip link add name test-bond0 type bond mode 802.3ad
+	ip link set dev $dev10 master test-bond0
+	ip link set dev $dev20 master test-bond0
+	ip link add name test-br0 type bridge
+	ip link set dev test-bond0 master test-br0
+	check_err $?
+
+	# clean up any leftovers
+	ip link del dev test-br0
+	ip link del dev test-bond0
+	echo 20 > /sys/bus/netdevsim/del_device
+	echo 10 > /sys/bus/netdevsim/del_device
+	$probed && rmmod netdevsim
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: bridge_parent_id"
+		return 1
+	fi
+	echo "PASS: bridge_parent_id"
+}
+
+address_get_proto()
+{
+	local addr=$1; shift
+
+	ip -N -j address show dev "$devdummy" |
+	    jq -e -r --arg addr "${addr%/*}" \
+	       '.[].addr_info[] | select(.local == $addr) | .protocol'
+}
+
+address_count()
+{
+	ip -N -j address show dev "$devdummy" "$@" |
+	    jq -e -r '[.[].addr_info[] | .local | select(. != null)] | length'
+}
+
+do_test_address_proto()
+{
+	local what=$1; shift
+	local addr=$1; shift
+	local addr2=${addr%/*}2/${addr#*/}
+	local addr3=${addr%/*}3/${addr#*/}
+	local proto
+	local count
+	local ret=0
+	local err
+
+	ip address add dev "$devdummy" "$addr3"
+	check_err $?
+	proto=$(address_get_proto "$addr3")
+	[[ "$proto" == null ]]
+	check_err $?
+
+	ip address add dev "$devdummy" "$addr2" proto 0x99
+	check_err $?
+	proto=$(address_get_proto "$addr2")
+	[[ "$proto" == 0x99 ]]
+	check_err $?
+
+	ip address add dev "$devdummy" "$addr" proto 0xab
+	check_err $?
+	proto=$(address_get_proto "$addr")
+	[[ "$proto" == 0xab ]]
+	check_err $?
+
+	ip address replace dev "$devdummy" "$addr" proto 0x11
+	proto=$(address_get_proto "$addr")
+	check_err $?
+	[[ "$proto" == 0x11 ]]
+	check_err $?
+
+	count=$(address_count)
+	check_err $?
+	(( count >= 3 )) # $addr, $addr2 and $addr3 plus any kernel addresses
+	check_err $?
+
+	count=$(address_count proto 0)
+	check_err $?
+	(( count == 1 )) # just $addr3
+	check_err $?
+
+	count=$(address_count proto 0x11)
+	check_err $?
+	(( count == 2 )) # $addr and $addr3
+	check_err $?
+
+	count=$(address_count proto 0xab)
+	check_err $?
+	(( count == 1 )) # just $addr3
+	check_err $?
+
+	ip address del dev "$devdummy" "$addr"
+	ip address del dev "$devdummy" "$addr2"
+	ip address del dev "$devdummy" "$addr3"
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: address proto $what"
+		return 1
+	fi
+	echo "PASS: address proto $what"
+}
+
+kci_test_address_proto()
+{
+	local ret=0
+
+	do_test_address_proto IPv4 192.0.2.1/28
+	check_err $?
+
+	do_test_address_proto IPv6 2001:db8:1::1/64
+	check_err $?
+
+	return $ret
+}
+
+kci_test_rtnl()
+{
+	local current_test
+	local ret=0
+
+	kci_add_dummy
+	if [ $ret -ne 0 ];then
+		echo "FAIL: cannot add dummy interface"
+		return 1
+	fi
+
+	for current_test in ${TESTS:-$ALL_TESTS}; do
+		$current_test
+		check_err $?
+	done
+
+	kci_del_dummy
+	return $ret
+}
+
+usage()
+{
+	cat <<EOF
+usage: ${0##*/} OPTS
+
+        -t <test>   Test(s) to run (default: all)
+                    (options: $(echo $ALL_TESTS))
+EOF
+}
+
+#check for needed privileges
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip
+fi
+
+for x in ip tc;do
+	$x -Version 2>/dev/null >/dev/null
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not run test without the $x tool"
+		exit $ksft_skip
+	fi
+done
+
+while getopts t:h o; do
+	case $o in
+		t) TESTS=$OPTARG;;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+kci_test_rtnl
+
+exit $?