summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/net
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-05-18 17:39:57 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-05-18 17:39:57 +0000
commitdc50eab76b709d68175a358d6e23a5a3890764d3 (patch)
treec754d0390db060af0213ff994f0ac310e4cfd6e9 /tools/testing/selftests/net
parentAdding debian version 6.6.15-2. (diff)
downloadlinux-dc50eab76b709d68175a358d6e23a5a3890764d3.tar.xz
linux-dc50eab76b709d68175a358d6e23a5a3890764d3.zip
Merging upstream version 6.7.7.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'tools/testing/selftests/net')
-rw-r--r--tools/testing/selftests/net/Makefile8
-rw-r--r--tools/testing/selftests/net/af_unix/scm_pidfd.c1
-rw-r--r--tools/testing/selftests/net/af_unix/test_unix_oob.c2
-rwxr-xr-xtools/testing/selftests/net/big_tcp.sh4
-rwxr-xr-xtools/testing/selftests/net/cmsg_ipv6.sh4
-rw-r--r--tools/testing/selftests/net/config16
-rwxr-xr-xtools/testing/selftests/net/fdb_flush.sh812
-rw-r--r--tools/testing/selftests/net/forwarding/Makefile3
-rwxr-xr-xtools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh283
-rwxr-xr-xtools/testing/selftests/net/forwarding/bridge_locked_port.sh4
-rwxr-xr-xtools/testing/selftests/net/forwarding/bridge_mdb.sh192
-rwxr-xr-xtools/testing/selftests/net/forwarding/tc_actions.sh3
-rwxr-xr-xtools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh8
-rw-r--r--tools/testing/selftests/net/io_uring_zerocopy_tx.c268
-rw-r--r--tools/testing/selftests/net/mptcp/config3
-rwxr-xr-xtools/testing/selftests/net/mptcp/diag.sh46
-rwxr-xr-xtools/testing/selftests/net/mptcp/mptcp_connect.sh41
-rwxr-xr-xtools/testing/selftests/net/mptcp/mptcp_join.sh124
-rw-r--r--tools/testing/selftests/net/mptcp/mptcp_lib.sh27
-rwxr-xr-xtools/testing/selftests/net/mptcp/mptcp_sockopt.sh1
-rwxr-xr-xtools/testing/selftests/net/mptcp/pm_netlink.sh8
-rw-r--r--tools/testing/selftests/net/mptcp/settings2
-rwxr-xr-xtools/testing/selftests/net/mptcp/simult_flows.sh3
-rwxr-xr-xtools/testing/selftests/net/mptcp/userspace_pm.sh49
-rw-r--r--tools/testing/selftests/net/nettest.c5
-rwxr-xr-xtools/testing/selftests/net/pmtu.sh70
-rwxr-xr-xtools/testing/selftests/net/route_localnet.sh6
-rwxr-xr-xtools/testing/selftests/net/rtnetlink.sh981
-rw-r--r--tools/testing/selftests/net/setup_veth.sh2
-rwxr-xr-xtools/testing/selftests/net/test_bridge_backup_port.sh394
-rwxr-xr-xtools/testing/selftests/net/test_vxlan_mdb.sh108
-rwxr-xr-xtools/testing/selftests/net/udpgro.sh4
-rwxr-xr-xtools/testing/selftests/net/udpgro_bench.sh4
-rwxr-xr-xtools/testing/selftests/net/udpgro_frglist.sh6
-rwxr-xr-xtools/testing/selftests/net/udpgro_fwd.sh22
-rw-r--r--tools/testing/selftests/net/udpgso_bench_rx.c2
-rwxr-xr-xtools/testing/selftests/net/unicast_extensions.sh101
-rwxr-xr-xtools/testing/selftests/net/veth.sh4
-rwxr-xr-xtools/testing/selftests/net/vlan_hw_filter.sh29
-rw-r--r--tools/testing/selftests/net/xdp_dummy.c13
40 files changed, 2188 insertions, 1475 deletions
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 4a2881d439..c1ae90c785 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -84,12 +84,15 @@ TEST_PROGS += sctp_vrf.sh
TEST_GEN_FILES += sctp_hello
TEST_GEN_FILES += csum
TEST_GEN_FILES += nat6to4.o
+TEST_GEN_FILES += xdp_dummy.o
TEST_GEN_FILES += ip_local_port_range
TEST_GEN_FILES += bind_wildcard
TEST_PROGS += test_vxlan_mdb.sh
TEST_PROGS += test_bridge_neigh_suppress.sh
TEST_PROGS += test_vxlan_nolocalbypass.sh
TEST_PROGS += test_bridge_backup_port.sh
+TEST_PROGS += fdb_flush.sh
+TEST_PROGS += vlan_hw_filter.sh
TEST_FILES := settings
@@ -99,8 +102,9 @@ $(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma
$(OUTPUT)/tcp_mmap: LDLIBS += -lpthread -lcrypto
$(OUTPUT)/tcp_inq: LDLIBS += -lpthread
$(OUTPUT)/bind_bhash: LDLIBS += -lpthread
+$(OUTPUT)/io_uring_zerocopy_tx: CFLAGS += -I../../../include/
-# Rules to generate bpf obj nat6to4.o
+# Rules to generate bpf objs
CLANG ?= clang
SCRATCH_DIR := $(OUTPUT)/tools
BUILD_DIR := $(SCRATCH_DIR)/build
@@ -135,7 +139,7 @@ endif
CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH))
-$(OUTPUT)/nat6to4.o: nat6to4.c $(BPFOBJ) | $(MAKE_DIRS)
+$(OUTPUT)/nat6to4.o $(OUTPUT)/xdp_dummy.o: $(OUTPUT)/%.o : %.c $(BPFOBJ) | $(MAKE_DIRS)
$(CLANG) -O2 --target=bpf -c $< $(CCINCLUDE) $(CLANG_SYS_INCLUDES) -o $@
$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
diff --git a/tools/testing/selftests/net/af_unix/scm_pidfd.c b/tools/testing/selftests/net/af_unix/scm_pidfd.c
index a86222143d..7e53459416 100644
--- a/tools/testing/selftests/net/af_unix/scm_pidfd.c
+++ b/tools/testing/selftests/net/af_unix/scm_pidfd.c
@@ -294,7 +294,6 @@ static void fill_sockaddr(struct sock_addr *addr, bool abstract)
static void client(FIXTURE_DATA(scm_pidfd) *self,
const FIXTURE_VARIANT(scm_pidfd) *variant)
{
- int err;
int cfd;
socklen_t len;
struct ucred peer_cred;
diff --git a/tools/testing/selftests/net/af_unix/test_unix_oob.c b/tools/testing/selftests/net/af_unix/test_unix_oob.c
index 532459a150..a7c51889ac 100644
--- a/tools/testing/selftests/net/af_unix/test_unix_oob.c
+++ b/tools/testing/selftests/net/af_unix/test_unix_oob.c
@@ -180,9 +180,7 @@ main(int argc, char **argv)
char buf[1024];
int on = 0;
char oob;
- int flags;
int atmark;
- char *tmp_file;
lfd = socket(AF_UNIX, SOCK_STREAM, 0);
memset(&consumer_addr, 0, sizeof(consumer_addr));
diff --git a/tools/testing/selftests/net/big_tcp.sh b/tools/testing/selftests/net/big_tcp.sh
index cde9a91c47..2db9d15cd4 100755
--- a/tools/testing/selftests/net/big_tcp.sh
+++ b/tools/testing/selftests/net/big_tcp.sh
@@ -122,7 +122,9 @@ do_netperf() {
local netns=$1
[ "$NF" = "6" ] && serip=$SERVER_IP6
- ip net exec $netns netperf -$NF -t TCP_STREAM -H $serip 2>&1 >/dev/null
+
+ # use large write to be sure to generate big tcp packets
+ ip net exec $netns netperf -$NF -t TCP_STREAM -l 1 -H $serip -- -m 262144 2>&1 >/dev/null
}
do_test() {
diff --git a/tools/testing/selftests/net/cmsg_ipv6.sh b/tools/testing/selftests/net/cmsg_ipv6.sh
index 330d0b1cec..c921750ca1 100755
--- a/tools/testing/selftests/net/cmsg_ipv6.sh
+++ b/tools/testing/selftests/net/cmsg_ipv6.sh
@@ -91,7 +91,7 @@ for ovr in setsock cmsg both diff; do
check_result $? 0 "TCLASS $prot $ovr - pass"
while [ -d /proc/$BG ]; do
- $NSEXE ./cmsg_sender -6 -p u $TGT6 1234
+ $NSEXE ./cmsg_sender -6 -p $p $m $((TOS2)) $TGT6 1234
done
tcpdump -r $TMPF -v 2>&1 | grep "class $TOS2" >> /dev/null
@@ -128,7 +128,7 @@ for ovr in setsock cmsg both diff; do
check_result $? 0 "HOPLIMIT $prot $ovr - pass"
while [ -d /proc/$BG ]; do
- $NSEXE ./cmsg_sender -6 -p u $TGT6 1234
+ $NSEXE ./cmsg_sender -6 -p $p $m $LIM $TGT6 1234
done
tcpdump -r $TMPF -v 2>&1 | grep "hlim $LIM[^0-9]" >> /dev/null
diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index 19ff750516..3b749addd3 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -19,8 +19,11 @@ CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_VLAN_8021Q=y
+CONFIG_GENEVE=m
CONFIG_IFB=y
CONFIG_INET_DIAG=y
+CONFIG_INET_ESP=y
+CONFIG_INET_ESP_OFFLOAD=y
CONFIG_IP_GRE=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
@@ -29,7 +32,10 @@ CONFIG_NF_NAT=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_RAW=m
CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_L2TP_ETH=m
@@ -45,8 +51,14 @@ CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_NAT=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_ACT_CT=m
CONFIG_NET_ACT_GACT=m
+CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_BPF=m
+CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
@@ -55,6 +67,9 @@ CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_NETEM=y
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NF_FLOW_TABLE=m
CONFIG_PSAMPLE=m
CONFIG_TCP_MD5SIG=y
CONFIG_TEST_BLACKHOLE_DEV=m
@@ -80,3 +95,4 @@ CONFIG_IP_SCTP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_CRYPTO_ARIA=y
CONFIG_XFRM_INTERFACE=m
+CONFIG_XFRM_USER=m
diff --git a/tools/testing/selftests/net/fdb_flush.sh b/tools/testing/selftests/net/fdb_flush.sh
new file mode 100755
index 0000000000..90e7a29e04
--- /dev/null
+++ b/tools/testing/selftests/net/fdb_flush.sh
@@ -0,0 +1,812 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test is for checking functionality of flushing FDB entries.
+# Check that flush works as expected with all the supported arguments and verify
+# some combinations of arguments.
+
+FLUSH_BY_STATE_TESTS="
+ vxlan_test_flush_by_permanent
+ vxlan_test_flush_by_nopermanent
+ vxlan_test_flush_by_static
+ vxlan_test_flush_by_nostatic
+ vxlan_test_flush_by_dynamic
+ vxlan_test_flush_by_nodynamic
+"
+
+FLUSH_BY_FLAG_TESTS="
+ vxlan_test_flush_by_extern_learn
+ vxlan_test_flush_by_noextern_learn
+ vxlan_test_flush_by_router
+ vxlan_test_flush_by_norouter
+"
+
+TESTS="
+ vxlan_test_flush_by_dev
+ vxlan_test_flush_by_vni
+ vxlan_test_flush_by_src_vni
+ vxlan_test_flush_by_port
+ vxlan_test_flush_by_dst_ip
+ vxlan_test_flush_by_nhid
+ $FLUSH_BY_STATE_TESTS
+ $FLUSH_BY_FLAG_TESTS
+ vxlan_test_flush_by_several_args
+ vxlan_test_flush_by_remote_attributes
+ bridge_test_flush_by_dev
+ bridge_test_flush_by_vlan
+ bridge_vxlan_test_flush
+"
+
+: ${VERBOSE:=0}
+: ${PAUSE_ON_FAIL:=no}
+: ${PAUSE:=no}
+: ${VXPORT:=4789}
+
+run_cmd()
+{
+ local cmd="$1"
+ local out
+ local rc
+ local stderr="2>/dev/null"
+
+ if [ "$VERBOSE" = "1" ]; then
+ printf "COMMAND: $cmd\n"
+ stderr=
+ fi
+
+ out=$(eval $cmd $stderr)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+
+ return $rc
+}
+
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+ local nsuccess
+ local nfail
+ local ret
+
+ if [ ${rc} -eq ${expected} ]; then
+ printf "TEST: %-60s [ OK ]\n" "${msg}"
+ nsuccess=$((nsuccess+1))
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf "TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "$VERBOSE" = "1" ]; then
+ echo " rc=$rc, expected $expected"
+ fi
+
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+
+ if [ "${PAUSE}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+
+ [ "$VERBOSE" = "1" ] && echo
+}
+
+MAC_POOL_1="
+ de:ad:be:ef:13:10
+ de:ad:be:ef:13:11
+ de:ad:be:ef:13:12
+ de:ad:be:ef:13:13
+ de:ad:be:ef:13:14
+"
+mac_pool_1_len=$(echo "$MAC_POOL_1" | grep -c .)
+
+MAC_POOL_2="
+ ca:fe:be:ef:13:10
+ ca:fe:be:ef:13:11
+ ca:fe:be:ef:13:12
+ ca:fe:be:ef:13:13
+ ca:fe:be:ef:13:14
+"
+mac_pool_2_len=$(echo "$MAC_POOL_2" | grep -c .)
+
+fdb_add_mac_pool_1()
+{
+ local dev=$1; shift
+ local args="$@"
+
+ for mac in $MAC_POOL_1
+ do
+ $BRIDGE fdb add $mac dev $dev $args
+ done
+}
+
+fdb_add_mac_pool_2()
+{
+ local dev=$1; shift
+ local args="$@"
+
+ for mac in $MAC_POOL_2
+ do
+ $BRIDGE fdb add $mac dev $dev $args
+ done
+}
+
+fdb_check_n_entries_by_dev_filter()
+{
+ local dev=$1; shift
+ local exp_entries=$1; shift
+ local filter="$@"
+
+ local entries=$($BRIDGE fdb show dev $dev | grep "$filter" | wc -l)
+
+ [[ $entries -eq $exp_entries ]]
+ rc=$?
+
+ log_test $rc 0 "$dev: Expected $exp_entries FDB entries, got $entries"
+ return $rc
+}
+
+vxlan_test_flush_by_dev()
+{
+ local vni=3000
+ local dst_ip=192.0.2.1
+
+ fdb_add_mac_pool_1 vx10 vni $vni dst $dst_ip
+ fdb_add_mac_pool_2 vx20 vni $vni dst $dst_ip
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len
+ fdb_check_n_entries_by_dev_filter vx20 $mac_pool_2_len
+
+ run_cmd "$BRIDGE fdb flush dev vx10"
+ log_test $? 0 "Flush FDB by dev vx10"
+
+ fdb_check_n_entries_by_dev_filter vx10 0
+ log_test $? 0 "Flush FDB by dev vx10 - test vx10 entries"
+
+ fdb_check_n_entries_by_dev_filter vx20 $mac_pool_2_len
+ log_test $? 0 "Flush FDB by dev vx10 - test vx20 entries"
+}
+
+vxlan_test_flush_by_vni()
+{
+ local vni_1=3000
+ local vni_2=4000
+ local dst_ip=192.0.2.1
+
+ fdb_add_mac_pool_1 vx10 vni $vni_1 dst $dst_ip
+ fdb_add_mac_pool_2 vx10 vni $vni_2 dst $dst_ip
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len vni $vni_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_2_len vni $vni_2
+
+ run_cmd "$BRIDGE fdb flush dev vx10 vni $vni_2"
+ log_test $? 0 "Flush FDB by dev vx10 and vni $vni_2"
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len vni $vni_1
+ log_test $? 0 "Test entries with vni $vni_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 vni $vni_2
+ log_test $? 0 "Test entries with vni $vni_2"
+}
+
+vxlan_test_flush_by_src_vni()
+{
+ # Set some entries with {vni=x,src_vni=y} and some with the opposite -
+ # {vni=y,src_vni=x}, to verify that when we flush by src_vni=x, entries
+ # with vni=x are not flused.
+ local vni_1=3000
+ local vni_2=4000
+ local src_vni_1=4000
+ local src_vni_2=3000
+ local dst_ip=192.0.2.1
+
+ # Reconfigure vx10 with 'external' to get 'src_vni' details in
+ # 'bridge fdb' output
+ $IP link del dev vx10
+ $IP link add name vx10 type vxlan dstport "$VXPORT" external
+
+ fdb_add_mac_pool_1 vx10 vni $vni_1 src_vni $src_vni_1 dst $dst_ip
+ fdb_add_mac_pool_2 vx10 vni $vni_2 src_vni $src_vni_2 dst $dst_ip
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len \
+ src_vni $src_vni_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_2_len \
+ src_vni $src_vni_2
+
+ run_cmd "$BRIDGE fdb flush dev vx10 src_vni $src_vni_2"
+ log_test $? 0 "Flush FDB by dev vx10 and src_vni $src_vni_2"
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len \
+ src_vni $src_vni_1
+ log_test $? 0 "Test entries with src_vni $src_vni_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 src_vni $src_vni_2
+ log_test $? 0 "Test entries with src_vni $src_vni_2"
+}
+
+vxlan_test_flush_by_port()
+{
+ local port_1=1234
+ local port_2=4321
+ local dst_ip=192.0.2.1
+
+ fdb_add_mac_pool_1 vx10 port $port_1 dst $dst_ip
+ fdb_add_mac_pool_2 vx10 port $port_2 dst $dst_ip
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len port $port_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_2_len port $port_2
+
+ run_cmd "$BRIDGE fdb flush dev vx10 port $port_2"
+ log_test $? 0 "Flush FDB by dev vx10 and port $port_2"
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len port $port_1
+ log_test $? 0 "Test entries with port $port_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 port $port_2
+ log_test $? 0 "Test entries with port $port_2"
+}
+
+vxlan_test_flush_by_dst_ip()
+{
+ local dst_ip_1=192.0.2.1
+ local dst_ip_2=192.0.2.2
+
+ fdb_add_mac_pool_1 vx10 dst $dst_ip_1
+ fdb_add_mac_pool_2 vx10 dst $dst_ip_2
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len dst $dst_ip_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_2_len dst $dst_ip_2
+
+ run_cmd "$BRIDGE fdb flush dev vx10 dst $dst_ip_2"
+ log_test $? 0 "Flush FDB by dev vx10 and dst $dst_ip_2"
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len dst $dst_ip_1
+ log_test $? 0 "Test entries with dst $dst_ip_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 dst $dst_ip_2
+ log_test $? 0 "Test entries with dst $dst_ip_2"
+}
+
+nexthops_add()
+{
+ local nhid_1=$1; shift
+ local nhid_2=$1; shift
+
+ $IP nexthop add id 10 via 192.0.2.1 fdb
+ $IP nexthop add id $nhid_1 group 10 fdb
+
+ $IP nexthop add id 20 via 192.0.2.2 fdb
+ $IP nexthop add id $nhid_2 group 20 fdb
+}
+
+vxlan_test_flush_by_nhid()
+{
+ local nhid_1=100
+ local nhid_2=200
+
+ nexthops_add $nhid_1 $nhid_2
+
+ fdb_add_mac_pool_1 vx10 nhid $nhid_1
+ fdb_add_mac_pool_2 vx10 nhid $nhid_2
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len nhid $nhid_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_2_len nhid $nhid_2
+
+ run_cmd "$BRIDGE fdb flush dev vx10 nhid $nhid_2"
+ log_test $? 0 "Flush FDB by dev vx10 and nhid $nhid_2"
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len nhid $nhid_1
+ log_test $? 0 "Test entries with nhid $nhid_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 nhid $nhid_2
+ log_test $? 0 "Test entries with nhid $nhid_2"
+
+ # Flush also entries with $nhid_1, and then verify that flushing by
+ # 'nhid' does not return an error when there are no entries with
+ # nexthops.
+ run_cmd "$BRIDGE fdb flush dev vx10 nhid $nhid_1"
+ log_test $? 0 "Flush FDB by dev vx10 and nhid $nhid_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 nhid
+ log_test $? 0 "Test entries with 'nhid' keyword"
+
+ run_cmd "$BRIDGE fdb flush dev vx10 nhid $nhid_1"
+ log_test $? 0 "Flush FDB by nhid when there are no entries with nexthop"
+}
+
+vxlan_test_flush_by_state()
+{
+ local flush_by_state=$1; shift
+ local state_1=$1; shift
+ local exp_state_1=$1; shift
+ local state_2=$1; shift
+ local exp_state_2=$1; shift
+
+ local dst_ip_1=192.0.2.1
+ local dst_ip_2=192.0.2.2
+
+ fdb_add_mac_pool_1 vx10 dst $dst_ip_1 $state_1
+ fdb_add_mac_pool_2 vx10 dst $dst_ip_2 $state_2
+
+ # Check the entries by dst_ip as not all states appear in 'bridge fdb'
+ # output.
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len dst $dst_ip_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_2_len dst $dst_ip_2
+
+ run_cmd "$BRIDGE fdb flush dev vx10 $flush_by_state"
+ log_test $? 0 "Flush FDB by dev vx10 and state $flush_by_state"
+
+ fdb_check_n_entries_by_dev_filter vx10 $exp_state_1 dst $dst_ip_1
+ log_test $? 0 "Test entries with state $state_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 $exp_state_2 dst $dst_ip_2
+ log_test $? 0 "Test entries with state $state_2"
+}
+
+vxlan_test_flush_by_permanent()
+{
+ # Entries that are added without state get 'permanent' state by
+ # default, add some entries with flag 'extern_learn' instead of state,
+ # so they will be added with 'permanent' and should be flushed also.
+ local flush_by_state="permanent"
+ local state_1="permanent"
+ local exp_state_1=0
+ local state_2="extern_learn"
+ local exp_state_2=0
+
+ vxlan_test_flush_by_state $flush_by_state $state_1 $exp_state_1 \
+ $state_2 $exp_state_2
+}
+
+vxlan_test_flush_by_nopermanent()
+{
+ local flush_by_state="nopermanent"
+ local state_1="permanent"
+ local exp_state_1=$mac_pool_1_len
+ local state_2="static"
+ local exp_state_2=0
+
+ vxlan_test_flush_by_state $flush_by_state $state_1 $exp_state_1 \
+ $state_2 $exp_state_2
+}
+
+vxlan_test_flush_by_static()
+{
+ local flush_by_state="static"
+ local state_1="static"
+ local exp_state_1=0
+ local state_2="dynamic"
+ local exp_state_2=$mac_pool_2_len
+
+ vxlan_test_flush_by_state $flush_by_state $state_1 $exp_state_1 \
+ $state_2 $exp_state_2
+}
+
+vxlan_test_flush_by_nostatic()
+{
+ local flush_by_state="nostatic"
+ local state_1="permanent"
+ local exp_state_1=$mac_pool_1_len
+ local state_2="dynamic"
+ local exp_state_2=0
+
+ vxlan_test_flush_by_state $flush_by_state $state_1 $exp_state_1 \
+ $state_2 $exp_state_2
+}
+
+vxlan_test_flush_by_dynamic()
+{
+ local flush_by_state="dynamic"
+ local state_1="dynamic"
+ local exp_state_1=0
+ local state_2="static"
+ local exp_state_2=$mac_pool_2_len
+
+ vxlan_test_flush_by_state $flush_by_state $state_1 $exp_state_1 \
+ $state_2 $exp_state_2
+}
+
+vxlan_test_flush_by_nodynamic()
+{
+ local flush_by_state="nodynamic"
+ local state_1="permanent"
+ local exp_state_1=0
+ local state_2="dynamic"
+ local exp_state_2=$mac_pool_2_len
+
+ vxlan_test_flush_by_state $flush_by_state $state_1 $exp_state_1 \
+ $state_2 $exp_state_2
+}
+
+vxlan_test_flush_by_flag()
+{
+ local flush_by_flag=$1; shift
+ local flag_1=$1; shift
+ local exp_flag_1=$1; shift
+ local flag_2=$1; shift
+ local exp_flag_2=$1; shift
+
+ local dst_ip_1=192.0.2.1
+ local dst_ip_2=192.0.2.2
+
+ fdb_add_mac_pool_1 vx10 dst $dst_ip_1 $flag_1
+ fdb_add_mac_pool_2 vx10 dst $dst_ip_2 $flag_2
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len $flag_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_2_len $flag_2
+
+ run_cmd "$BRIDGE fdb flush dev vx10 $flush_by_flag"
+ log_test $? 0 "Flush FDB by dev vx10 and flag $flush_by_flag"
+
+ fdb_check_n_entries_by_dev_filter vx10 $exp_flag_1 dst $dst_ip_1
+ log_test $? 0 "Test entries with flag $flag_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 $exp_flag_2 dst $dst_ip_2
+ log_test $? 0 "Test entries with flag $flag_2"
+}
+
+vxlan_test_flush_by_extern_learn()
+{
+ local flush_by_flag="extern_learn"
+ local flag_1="extern_learn"
+ local exp_flag_1=0
+ local flag_2="router"
+ local exp_flag_2=$mac_pool_2_len
+
+ vxlan_test_flush_by_flag $flush_by_flag $flag_1 $exp_flag_1 \
+ $flag_2 $exp_flag_2
+}
+
+vxlan_test_flush_by_noextern_learn()
+{
+ local flush_by_flag="noextern_learn"
+ local flag_1="extern_learn"
+ local exp_flag_1=$mac_pool_1_len
+ local flag_2="router"
+ local exp_flag_2=0
+
+ vxlan_test_flush_by_flag $flush_by_flag $flag_1 $exp_flag_1 \
+ $flag_2 $exp_flag_2
+}
+
+vxlan_test_flush_by_router()
+{
+ local flush_by_flag="router"
+ local flag_1="router"
+ local exp_flag_1=0
+ local flag_2="extern_learn"
+ local exp_flag_2=$mac_pool_2_len
+
+ vxlan_test_flush_by_flag $flush_by_flag $flag_1 $exp_flag_1 \
+ $flag_2 $exp_flag_2
+}
+
+vxlan_test_flush_by_norouter()
+{
+
+ local flush_by_flag="norouter"
+ local flag_1="router"
+ local exp_flag_1=$mac_pool_1_len
+ local flag_2="extern_learn"
+ local exp_flag_2=0
+
+ vxlan_test_flush_by_flag $flush_by_flag $flag_1 $exp_flag_1 \
+ $flag_2 $exp_flag_2
+}
+
+vxlan_test_flush_by_several_args()
+{
+ local dst_ip_1=192.0.2.1
+ local dst_ip_2=192.0.2.2
+ local state_1=permanent
+ local state_2=static
+ local vni=3000
+ local port=1234
+ local nhid=100
+ local flag=router
+ local flush_args
+
+ ################### Flush by 2 args - nhid and flag ####################
+ $IP nexthop add id 10 via 192.0.2.1 fdb
+ $IP nexthop add id $nhid group 10 fdb
+
+ fdb_add_mac_pool_1 vx10 nhid $nhid $flag $state_1
+ fdb_add_mac_pool_2 vx10 nhid $nhid $flag $state_2
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len $state_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_2_len $state_2
+
+ run_cmd "$BRIDGE fdb flush dev vx10 nhid $nhid $flag"
+ log_test $? 0 "Flush FDB by dev vx10 nhid $nhid $flag"
+
+ # All entries should be flushed as 'state' is not an argument for flush
+ # filtering.
+ fdb_check_n_entries_by_dev_filter vx10 0 $state_1
+ log_test $? 0 "Test entries with state $state_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 $state_2
+ log_test $? 0 "Test entries with state $state_2"
+
+ ################ Flush by 3 args - VNI, port and dst_ip ################
+ fdb_add_mac_pool_1 vx10 vni $vni port $port dst $dst_ip_1
+ fdb_add_mac_pool_2 vx10 vni $vni port $port dst $dst_ip_2
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len dst $dst_ip_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_2_len dst $dst_ip_2
+
+ flush_args="vni $vni port $port dst $dst_ip_2"
+ run_cmd "$BRIDGE fdb flush dev vx10 $flush_args"
+ log_test $? 0 "Flush FDB by dev vx10 $flush_args"
+
+ # Only entries with $dst_ip_2 should be flushed, even the rest arguments
+ # match the filter, the flush should be AND of all the arguments.
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len dst $dst_ip_1
+ log_test $? 0 "Test entries with dst $dst_ip_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 dst $dst_ip_2
+ log_test $? 0 "Test entries with dst $dst_ip_2"
+}
+
+multicast_fdb_entries_add()
+{
+ mac=00:00:00:00:00:00
+ vnis=(2000 3000)
+
+ for vni in "${vnis[@]}"; do
+ $BRIDGE fdb append $mac dev vx10 dst 192.0.2.1 vni $vni \
+ src_vni 5000
+ $BRIDGE fdb append $mac dev vx10 dst 192.0.2.1 vni $vni \
+ port 1111
+ $BRIDGE fdb append $mac dev vx10 dst 192.0.2.2 vni $vni \
+ port 2222
+ done
+}
+
+vxlan_test_flush_by_remote_attributes()
+{
+ local flush_args
+
+ # Reconfigure vx10 with 'external' to get 'src_vni' details in
+ # 'bridge fdb' output
+ $IP link del dev vx10
+ $IP link add name vx10 type vxlan dstport "$VXPORT" external
+
+ # For multicat FDB entries, the VXLAN driver stores a linked list of
+ # remotes for a given key. Verify that only the expected remotes are
+ # flushed.
+ multicast_fdb_entries_add
+
+ ## Flush by 3 remote's attributes - destination IP, port and VNI ##
+ flush_args="dst 192.0.2.1 port 1111 vni 2000"
+ fdb_check_n_entries_by_dev_filter vx10 1 $flush_args
+
+ t0_n_entries=$($BRIDGE fdb show dev vx10 | wc -l)
+ run_cmd "$BRIDGE fdb flush dev vx10 $flush_args"
+ log_test $? 0 "Flush FDB by dev vx10 $flush_args"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 $flush_args
+
+ exp_n_entries=$((t0_n_entries - 1))
+ t1_n_entries=$($BRIDGE fdb show dev vx10 | wc -l)
+ [[ $t1_n_entries -eq $exp_n_entries ]]
+ log_test $? 0 "Check how many entries were flushed"
+
+ ## Flush by 2 remote's attributes - destination IP and port ##
+ flush_args="dst 192.0.2.2 port 2222"
+
+ fdb_check_n_entries_by_dev_filter vx10 2 $flush_args
+
+ t0_n_entries=$($BRIDGE fdb show dev vx10 | wc -l)
+ run_cmd "$BRIDGE fdb flush dev vx10 $flush_args"
+ log_test $? 0 "Flush FDB by dev vx10 $flush_args"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 $flush_args
+
+ exp_n_entries=$((t0_n_entries - 2))
+ t1_n_entries=$($BRIDGE fdb show dev vx10 | wc -l)
+ [[ $t1_n_entries -eq $exp_n_entries ]]
+ log_test $? 0 "Check how many entries were flushed"
+
+ ## Flush by source VNI, which is not remote's attribute and VNI ##
+ flush_args="vni 3000 src_vni 5000"
+
+ fdb_check_n_entries_by_dev_filter vx10 1 $flush_args
+
+ t0_n_entries=$($BRIDGE fdb show dev vx10 | wc -l)
+ run_cmd "$BRIDGE fdb flush dev vx10 $flush_args"
+ log_test $? 0 "Flush FDB by dev vx10 $flush_args"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 $flush_args
+
+ exp_n_entries=$((t0_n_entries -1))
+ t1_n_entries=$($BRIDGE fdb show dev vx10 | wc -l)
+ [[ $t1_n_entries -eq $exp_n_entries ]]
+ log_test $? 0 "Check how many entries were flushed"
+
+ # Flush by 1 remote's attribute - destination IP ##
+ flush_args="dst 192.0.2.1"
+
+ fdb_check_n_entries_by_dev_filter vx10 2 $flush_args
+
+ t0_n_entries=$($BRIDGE fdb show dev vx10 | wc -l)
+ run_cmd "$BRIDGE fdb flush dev vx10 $flush_args"
+ log_test $? 0 "Flush FDB by dev vx10 $flush_args"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 $flush_args
+
+ exp_n_entries=$((t0_n_entries -2))
+ t1_n_entries=$($BRIDGE fdb show dev vx10 | wc -l)
+ [[ $t1_n_entries -eq $exp_n_entries ]]
+ log_test $? 0 "Check how many entries were flushed"
+}
+
+bridge_test_flush_by_dev()
+{
+ local dst_ip=192.0.2.1
+ local br0_n_ent_t0=$($BRIDGE fdb show dev br0 | wc -l)
+ local br1_n_ent_t0=$($BRIDGE fdb show dev br1 | wc -l)
+
+ fdb_add_mac_pool_1 br0 dst $dst_ip
+ fdb_add_mac_pool_2 br1 dst $dst_ip
+
+ # Each 'fdb add' command adds one extra entry in the bridge with the
+ # default vlan.
+ local exp_br0_n_ent=$(($br0_n_ent_t0 + 2 * $mac_pool_1_len))
+ local exp_br1_n_ent=$(($br1_n_ent_t0 + 2 * $mac_pool_2_len))
+
+ fdb_check_n_entries_by_dev_filter br0 $exp_br0_n_ent
+ fdb_check_n_entries_by_dev_filter br1 $exp_br1_n_ent
+
+ run_cmd "$BRIDGE fdb flush dev br0"
+ log_test $? 0 "Flush FDB by dev br0"
+
+ # The default entry should not be flushed
+ fdb_check_n_entries_by_dev_filter br0 1
+ log_test $? 0 "Flush FDB by dev br0 - test br0 entries"
+
+ fdb_check_n_entries_by_dev_filter br1 $exp_br1_n_ent
+ log_test $? 0 "Flush FDB by dev br0 - test br1 entries"
+}
+
+bridge_test_flush_by_vlan()
+{
+ local vlan_1=10
+ local vlan_2=20
+ local vlan_1_ent_t0
+ local vlan_2_ent_t0
+
+ $BRIDGE vlan add vid $vlan_1 dev br0 self
+ $BRIDGE vlan add vid $vlan_2 dev br0 self
+
+ vlan_1_ent_t0=$($BRIDGE fdb show dev br0 | grep "vlan $vlan_1" | wc -l)
+ vlan_2_ent_t0=$($BRIDGE fdb show dev br0 | grep "vlan $vlan_2" | wc -l)
+
+ fdb_add_mac_pool_1 br0 vlan $vlan_1
+ fdb_add_mac_pool_2 br0 vlan $vlan_2
+
+ local exp_vlan_1_ent=$(($vlan_1_ent_t0 + $mac_pool_1_len))
+ local exp_vlan_2_ent=$(($vlan_2_ent_t0 + $mac_pool_2_len))
+
+ fdb_check_n_entries_by_dev_filter br0 $exp_vlan_1_ent vlan $vlan_1
+ fdb_check_n_entries_by_dev_filter br0 $exp_vlan_2_ent vlan $vlan_2
+
+ run_cmd "$BRIDGE fdb flush dev br0 vlan $vlan_1"
+ log_test $? 0 "Flush FDB by dev br0 and vlan $vlan_1"
+
+ fdb_check_n_entries_by_dev_filter br0 0 vlan $vlan_1
+ log_test $? 0 "Test entries with vlan $vlan_1"
+
+ fdb_check_n_entries_by_dev_filter br0 $exp_vlan_2_ent vlan $vlan_2
+ log_test $? 0 "Test entries with vlan $vlan_2"
+}
+
+bridge_vxlan_test_flush()
+{
+ local vlan_1=10
+ local dst_ip=192.0.2.1
+
+ $IP link set dev vx10 master br0
+ $BRIDGE vlan add vid $vlan_1 dev br0 self
+ $BRIDGE vlan add vid $vlan_1 dev vx10
+
+ fdb_add_mac_pool_1 vx10 vni 3000 dst $dst_ip self master
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len vlan $vlan_1
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len vni 3000
+
+ # Such command should fail in VXLAN driver as vlan is not supported,
+ # but the command should flush the entries in the bridge
+ run_cmd "$BRIDGE fdb flush dev vx10 vlan $vlan_1 master self"
+ log_test $? 255 \
+ "Flush FDB by dev vx10, vlan $vlan_1, master and self"
+
+ fdb_check_n_entries_by_dev_filter vx10 0 vlan $vlan_1
+ log_test $? 0 "Test entries with vlan $vlan_1"
+
+ fdb_check_n_entries_by_dev_filter vx10 $mac_pool_1_len dst $dst_ip
+ log_test $? 0 "Test entries with dst $dst_ip"
+}
+
+setup()
+{
+ IP="ip -netns ns1"
+ BRIDGE="bridge -netns ns1"
+
+ ip netns add ns1
+
+ $IP link add name vx10 type vxlan id 1000 dstport "$VXPORT"
+ $IP link add name vx20 type vxlan id 2000 dstport "$VXPORT"
+
+ $IP link add br0 type bridge vlan_filtering 1
+ $IP link add br1 type bridge vlan_filtering 1
+}
+
+cleanup()
+{
+ $IP link del dev br1
+ $IP link del dev br0
+
+ $IP link del dev vx20
+ $IP link del dev vx10
+
+ ip netns del ns1
+}
+
+################################################################################
+# main
+
+while getopts :t:pPhvw: o
+do
+ case $o in
+ t) TESTS=$OPTARG;;
+ p) PAUSE_ON_FAIL=yes;;
+ P) PAUSE=yes;;
+ v) VERBOSE=$(($VERBOSE + 1));;
+ w) PING_TIMEOUT=$OPTARG;;
+ h) usage; exit 0;;
+ *) usage; exit 1;;
+ esac
+done
+
+# make sure we don't pause twice
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+if [ "$(id -u)" -ne 0 ];then
+ echo "SKIP: Need root privileges"
+ exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+# Check a flag that is added to flush command as part of VXLAN flush support
+bridge fdb help 2>&1 | grep -q "\[no\]router"
+if [ $? -ne 0 ]; then
+ echo "SKIP: iproute2 too old, missing flush command for VXLAN"
+ exit $ksft_skip
+fi
+
+ip link add dev vx10 type vxlan id 1000 2> /dev/null
+out=$(bridge fdb flush dev vx10 2>&1 | grep -q "Operation not supported")
+if [ $? -eq 0 ]; then
+ echo "SKIP: kernel lacks vxlan flush support"
+ exit $ksft_skip
+fi
+ip link del dev vx10
+
+for t in $TESTS
+do
+ setup; $t; cleanup;
+done
diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
index 74e754e266..df593b7b3e 100644
--- a/tools/testing/selftests/net/forwarding/Makefile
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+ OR MIT
-TEST_PROGS = bridge_igmp.sh \
+TEST_PROGS = bridge_fdb_learning_limit.sh \
+ bridge_igmp.sh \
bridge_locked_port.sh \
bridge_mdb.sh \
bridge_mdb_host.sh \
diff --git a/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh b/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh
new file mode 100755
index 0000000000..0760a34b71
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# ShellCheck incorrectly believes that most of the code here is unreachable
+# because it's invoked by variable name following ALL_TESTS.
+#
+# shellcheck disable=SC2317
+
+ALL_TESTS="check_accounting check_limit"
+NUM_NETIFS=6
+source lib.sh
+
+TEST_MAC_BASE=de:ad:be:ef:42:
+
+NUM_PKTS=16
+FDB_LIMIT=8
+
+FDB_TYPES=(
+ # name is counted? overrides learned?
+ 'learned 1 0'
+ 'static 0 1'
+ 'user 0 1'
+ 'extern_learn 0 1'
+ 'local 0 1'
+)
+
+mac()
+{
+ printf "${TEST_MAC_BASE}%02x" "$1"
+}
+
+H1_DEFAULT_MAC=$(mac 42)
+
+switch_create()
+{
+ ip link add dev br0 type bridge
+
+ ip link set dev "$swp1" master br0
+ ip link set dev "$swp2" master br0
+ # swp3 is used to add local MACs, so do not add it to the bridge yet.
+
+ # swp2 is only used for replying when learning on swp1, its MAC should not be learned.
+ ip link set dev "$swp2" type bridge_slave learning off
+
+ ip link set dev br0 up
+
+ ip link set dev "$swp1" up
+ ip link set dev "$swp2" up
+ ip link set dev "$swp3" up
+}
+
+switch_destroy()
+{
+ ip link set dev "$swp3" down
+ ip link set dev "$swp2" down
+ ip link set dev "$swp1" down
+
+ ip link del dev br0
+}
+
+h_create()
+{
+ ip link set "$h1" addr "$H1_DEFAULT_MAC"
+
+ simple_if_init "$h1" 192.0.2.1/24
+ simple_if_init "$h2" 192.0.2.2/24
+}
+
+h_destroy()
+{
+ simple_if_fini "$h1" 192.0.2.1/24
+ simple_if_fini "$h2" 192.0.2.2/24
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ h2=${NETIFS[p3]}
+ swp2=${NETIFS[p4]}
+
+ swp3=${NETIFS[p6]}
+
+ vrf_prepare
+
+ h_create
+
+ switch_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ switch_destroy
+
+ h_destroy
+
+ vrf_cleanup
+}
+
+fdb_get_n_learned()
+{
+ ip -d -j link show dev br0 type bridge | \
+ jq '.[]["linkinfo"]["info_data"]["fdb_n_learned"]'
+}
+
+fdb_get_n_mac()
+{
+ local mac=${1}
+
+ bridge -j fdb show br br0 | \
+ jq "map(select(.mac == \"${mac}\" and (has(\"vlan\") | not))) | length"
+}
+
+fdb_fill_learned()
+{
+ local i
+
+ for i in $(seq 1 "$NUM_PKTS"); do
+ fdb_add learned "$(mac "$i")"
+ done
+}
+
+fdb_reset()
+{
+ bridge fdb flush dev br0
+
+ # Keep the default MAC address of h1 in the table. We set it to a different one when
+ # testing dynamic learning.
+ bridge fdb add "$H1_DEFAULT_MAC" dev "$swp1" master static use
+}
+
+fdb_add()
+{
+ local type=$1 mac=$2
+
+ case "$type" in
+ learned)
+ ip link set "$h1" addr "$mac"
+ # Wait for a reply so we implicitly wait until after the forwarding
+ # code finished and the FDB entry was created.
+ PING_COUNT=1 ping_do "$h1" 192.0.2.2
+ check_err $? "Failed to ping another bridge port"
+ ip link set "$h1" addr "$H1_DEFAULT_MAC"
+ ;;
+ local)
+ ip link set dev "$swp3" addr "$mac" && ip link set "$swp3" master br0
+ ;;
+ static)
+ bridge fdb replace "$mac" dev "$swp1" master static
+ ;;
+ user)
+ bridge fdb replace "$mac" dev "$swp1" master static use
+ ;;
+ extern_learn)
+ bridge fdb replace "$mac" dev "$swp1" master extern_learn
+ ;;
+ esac
+
+ check_err $? "Failed to add a FDB entry of type ${type}"
+}
+
+fdb_del()
+{
+ local type=$1 mac=$2
+
+ case "$type" in
+ local)
+ ip link set "$swp3" nomaster
+ ;;
+ *)
+ bridge fdb del "$mac" dev "$swp1" master
+ ;;
+ esac
+
+ check_err $? "Failed to remove a FDB entry of type ${type}"
+}
+
+check_accounting_one_type()
+{
+ local type=$1 is_counted=$2 overrides_learned=$3
+ shift 3
+ RET=0
+
+ fdb_reset
+ fdb_add "$type" "$(mac 0)"
+ learned=$(fdb_get_n_learned)
+ [ "$learned" -ne "$is_counted" ]
+ check_fail $? "Inserted FDB type ${type}: Expected the count ${is_counted}, but got ${learned}"
+
+ fdb_del "$type" "$(mac 0)"
+ learned=$(fdb_get_n_learned)
+ [ "$learned" -ne 0 ]
+ check_fail $? "Removed FDB type ${type}: Expected the count 0, but got ${learned}"
+
+ if [ "$overrides_learned" -eq 1 ]; then
+ fdb_reset
+ fdb_add learned "$(mac 0)"
+ fdb_add "$type" "$(mac 0)"
+ learned=$(fdb_get_n_learned)
+ [ "$learned" -ne "$is_counted" ]
+ check_fail $? "Set a learned entry to FDB type ${type}: Expected the count ${is_counted}, but got ${learned}"
+ fdb_del "$type" "$(mac 0)"
+ fi
+
+ log_test "FDB accounting interacting with FDB type ${type}"
+}
+
+check_accounting()
+{
+ local type_args learned
+ RET=0
+
+ fdb_reset
+ learned=$(fdb_get_n_learned)
+ [ "$learned" -ne 0 ]
+ check_fail $? "Flushed the FDB table: Expected the count 0, but got ${learned}"
+
+ fdb_fill_learned
+ sleep 1
+
+ learned=$(fdb_get_n_learned)
+ [ "$learned" -ne "$NUM_PKTS" ]
+ check_fail $? "Filled the FDB table: Expected the count ${NUM_PKTS}, but got ${learned}"
+
+ log_test "FDB accounting"
+
+ for type_args in "${FDB_TYPES[@]}"; do
+ # This is intentional use of word splitting.
+ # shellcheck disable=SC2086
+ check_accounting_one_type $type_args
+ done
+}
+
+check_limit_one_type()
+{
+ local type=$1 is_counted=$2
+ local n_mac expected=$((1 - is_counted))
+ RET=0
+
+ fdb_reset
+ fdb_fill_learned
+
+ fdb_add "$type" "$(mac 0)"
+ n_mac=$(fdb_get_n_mac "$(mac 0)")
+ [ "$n_mac" -ne "$expected" ]
+ check_fail $? "Inserted FDB type ${type} at limit: Expected the count ${expected}, but got ${n_mac}"
+
+ log_test "FDB limits interacting with FDB type ${type}"
+}
+
+check_limit()
+{
+ local learned
+ RET=0
+
+ ip link set br0 type bridge fdb_max_learned "$FDB_LIMIT"
+
+ fdb_reset
+ fdb_fill_learned
+
+ learned=$(fdb_get_n_learned)
+ [ "$learned" -ne "$FDB_LIMIT" ]
+ check_fail $? "Filled the limited FDB table: Expected the count ${FDB_LIMIT}, but got ${learned}"
+
+ log_test "FDB limits"
+
+ for type_args in "${FDB_TYPES[@]}"; do
+ # This is intentional use of word splitting.
+ # shellcheck disable=SC2086
+ check_limit_one_type $type_args
+ done
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
index 9af9f69648..c62331b2e0 100755
--- a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
@@ -327,10 +327,10 @@ locked_port_mab_redirect()
RET=0
check_port_mab_support || return 0
- bridge link set dev $swp1 learning on locked on mab on
tc qdisc add dev $swp1 clsact
tc filter add dev $swp1 ingress protocol all pref 1 handle 101 flower \
action mirred egress redirect dev $swp2
+ bridge link set dev $swp1 learning on locked on mab on
ping_do $h1 192.0.2.2
check_err $? "Ping did not work with redirection"
@@ -349,8 +349,8 @@ locked_port_mab_redirect()
check_err $? "Locked entry not created after deleting filter"
bridge fdb del `mac_get $h1` vlan 1 dev $swp1 master
- tc qdisc del dev $swp1 clsact
bridge link set dev $swp1 learning off locked off mab off
+ tc qdisc del dev $swp1 clsact
log_test "Locked port MAB redirect"
}
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb.sh b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
index d0c6c499d5..a3678dfe58 100755
--- a/tools/testing/selftests/net/forwarding/bridge_mdb.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
@@ -145,14 +145,14 @@ cfg_test_host_common()
# Check basic add, replace and delete behavior.
bridge mdb add dev br0 port br0 grp $grp $state vid 10
- bridge mdb show dev br0 vid 10 | grep -q "$grp"
+ bridge mdb get dev br0 grp $grp vid 10 &> /dev/null
check_err $? "Failed to add $name host entry"
bridge mdb replace dev br0 port br0 grp $grp $state vid 10 &> /dev/null
check_fail $? "Managed to replace $name host entry"
bridge mdb del dev br0 port br0 grp $grp $state vid 10
- bridge mdb show dev br0 vid 10 | grep -q "$grp"
+ bridge mdb get dev br0 grp $grp vid 10 &> /dev/null
check_fail $? "Failed to delete $name host entry"
# Check error cases.
@@ -200,7 +200,7 @@ cfg_test_port_common()
# Check basic add, replace and delete behavior.
bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
- bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+ bridge mdb get dev br0 $grp_key vid 10 &> /dev/null
check_err $? "Failed to add $name entry"
bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \
@@ -208,31 +208,31 @@ cfg_test_port_common()
check_err $? "Failed to replace $name entry"
bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10
- bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+ bridge mdb get dev br0 $grp_key vid 10 &> /dev/null
check_fail $? "Failed to delete $name entry"
# Check default protocol and replacement.
bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
- bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "static"
+ bridge -d mdb get dev br0 $grp_key vid 10 | grep -q "static"
check_err $? "$name entry not added with default \"static\" protocol"
bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \
proto 123
- bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "123"
+ bridge -d mdb get dev br0 $grp_key vid 10 | grep -q "123"
check_err $? "Failed to replace protocol of $name entry"
bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10
# Check behavior when VLAN is not specified.
bridge mdb add dev br0 port $swp1 $grp_key permanent
- bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+ bridge mdb get dev br0 $grp_key vid 10 &> /dev/null
check_err $? "$name entry with VLAN 10 not added when VLAN was not specified"
- bridge mdb show dev br0 vid 20 | grep -q "$grp_key"
+ bridge mdb get dev br0 $grp_key vid 20 &> /dev/null
check_err $? "$name entry with VLAN 20 not added when VLAN was not specified"
bridge mdb del dev br0 port $swp1 $grp_key permanent
- bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+ bridge mdb get dev br0 $grp_key vid 10 &> /dev/null
check_fail $? "$name entry with VLAN 10 not deleted when VLAN was not specified"
- bridge mdb show dev br0 vid 20 | grep -q "$grp_key"
+ bridge mdb get dev br0 $grp_key vid 20 &> /dev/null
check_fail $? "$name entry with VLAN 20 not deleted when VLAN was not specified"
# Check behavior when bridge port is down.
@@ -298,21 +298,21 @@ __cfg_test_port_ip_star_g()
RET=0
bridge mdb add dev br0 port $swp1 grp $grp vid 10
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "exclude"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "exclude"
check_err $? "Default filter mode is not \"exclude\""
bridge mdb del dev br0 port $swp1 grp $grp vid 10
# Check basic add and delete behavior.
bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \
source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src"
+ bridge -d mdb get dev br0 grp $grp vid 10 &> /dev/null
check_err $? "(*, G) entry not created"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null
check_err $? "(S, G) entry not created"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src"
+ bridge -d mdb get dev br0 grp $grp vid 10 &> /dev/null
check_fail $? "(*, G) entry not deleted"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null
check_fail $? "(S, G) entry not deleted"
## State (permanent / temp) tests.
@@ -321,18 +321,15 @@ __cfg_test_port_ip_star_g()
bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \
filter_mode exclude source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "permanent"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "permanent"
check_err $? "(*, G) entry not added as \"permanent\" when should"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | \
grep -q "permanent"
check_err $? "(S, G) entry not added as \"permanent\" when should"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q " 0.00"
+ bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q " 0.00"
check_err $? "(*, G) \"permanent\" entry has a pending group timer"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "\/0.00"
+ bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q "/0.00"
check_err $? "\"permanent\" source entry has a pending source timer"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -342,18 +339,14 @@ __cfg_test_port_ip_star_g()
bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
filter_mode exclude source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "temp"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "temp"
check_err $? "(*, G) EXCLUDE entry not added as \"temp\" when should"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "temp"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "temp"
check_err $? "(S, G) \"blocked\" entry not added as \"temp\" when should"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q " 0.00"
+ bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q " 0.00"
check_fail $? "(*, G) EXCLUDE entry does not have a pending group timer"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "\/0.00"
+ bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q "/0.00"
check_err $? "\"blocked\" source entry has a pending source timer"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -363,18 +356,14 @@ __cfg_test_port_ip_star_g()
bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
filter_mode include source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "temp"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "temp"
check_err $? "(*, G) INCLUDE entry not added as \"temp\" when should"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "temp"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "temp"
check_err $? "(S, G) entry not added as \"temp\" when should"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q " 0.00"
+ bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q " 0.00"
check_err $? "(*, G) INCLUDE entry has a pending group timer"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "\/0.00"
+ bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q "/0.00"
check_fail $? "Source entry does not have a pending source timer"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -383,8 +372,7 @@ __cfg_test_port_ip_star_g()
bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
filter_mode include source_list $src1
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q " 0.00"
+ bridge -d -s mdb get dev br0 grp $grp src $src1 vid 10 | grep -q " 0.00"
check_err $? "(S, G) entry has a pending group timer"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -396,11 +384,9 @@ __cfg_test_port_ip_star_g()
bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
filter_mode include source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "include"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "include"
check_err $? "(*, G) INCLUDE not added with \"include\" filter mode"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "blocked"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "blocked"
check_fail $? "(S, G) entry marked as \"blocked\" when should not"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -410,11 +396,9 @@ __cfg_test_port_ip_star_g()
bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
filter_mode exclude source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "exclude"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "exclude"
check_err $? "(*, G) EXCLUDE not added with \"exclude\" filter mode"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "blocked"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "blocked"
check_err $? "(S, G) entry not marked as \"blocked\" when should"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -426,11 +410,9 @@ __cfg_test_port_ip_star_g()
bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
filter_mode exclude source_list $src1 proto zebra
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "zebra"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "zebra"
check_err $? "(*, G) entry not added with \"zebra\" protocol"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "zebra"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "zebra"
check_err $? "(S, G) entry not marked added with \"zebra\" protocol"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -443,20 +425,16 @@ __cfg_test_port_ip_star_g()
bridge mdb replace dev br0 port $swp1 grp $grp permanent vid 10 \
filter_mode exclude source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "permanent"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "permanent"
check_err $? "(*, G) entry not marked as \"permanent\" after replace"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "permanent"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "permanent"
check_err $? "(S, G) entry not marked as \"permanent\" after replace"
bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
filter_mode exclude source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "temp"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "temp"
check_err $? "(*, G) entry not marked as \"temp\" after replace"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "temp"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "temp"
check_err $? "(S, G) entry not marked as \"temp\" after replace"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -467,20 +445,16 @@ __cfg_test_port_ip_star_g()
bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
filter_mode include source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "include"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "include"
check_err $? "(*, G) not marked with \"include\" filter mode after replace"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "blocked"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "blocked"
check_fail $? "(S, G) marked as \"blocked\" after replace"
bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
filter_mode exclude source_list $src1
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "exclude"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "exclude"
check_err $? "(*, G) not marked with \"exclude\" filter mode after replace"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "blocked"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "blocked"
check_err $? "(S, G) not marked as \"blocked\" after replace"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -491,20 +465,20 @@ __cfg_test_port_ip_star_g()
bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
filter_mode exclude source_list $src1,$src2,$src3
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null
check_err $? "(S, G) entry for source $src1 not created after replace"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2"
+ bridge -d mdb get dev br0 grp $grp src $src2 vid 10 &> /dev/null
check_err $? "(S, G) entry for source $src2 not created after replace"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3"
+ bridge -d mdb get dev br0 grp $grp src $src3 vid 10 &> /dev/null
check_err $? "(S, G) entry for source $src3 not created after replace"
bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
filter_mode exclude source_list $src1,$src3
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null
check_err $? "(S, G) entry for source $src1 not created after second replace"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2"
+ bridge -d mdb get dev br0 grp $grp src $src2 vid 10 &> /dev/null
check_fail $? "(S, G) entry for source $src2 created after second replace"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3"
+ bridge -d mdb get dev br0 grp $grp src $src3 vid 10 &> /dev/null
check_err $? "(S, G) entry for source $src3 not created after second replace"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -515,11 +489,9 @@ __cfg_test_port_ip_star_g()
bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
filter_mode exclude source_list $src1 proto bgp
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
- grep -q "bgp"
+ bridge -d mdb get dev br0 grp $grp vid 10 | grep -q "bgp"
check_err $? "(*, G) protocol not changed to \"bgp\" after replace"
- bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
- grep -q "bgp"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep -q "bgp"
check_err $? "(S, G) protocol not changed to \"bgp\" after replace"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -532,8 +504,8 @@ __cfg_test_port_ip_star_g()
bridge mdb add dev br0 port $swp2 grp $grp vid 10 \
filter_mode include source_list $src1
bridge mdb add dev br0 port $swp1 grp $grp vid 10
- bridge -d mdb show dev br0 vid 10 | grep "$swp1" | grep "$grp" | \
- grep "$src1" | grep -q "added_by_star_ex"
+ bridge -d mdb get dev br0 grp $grp src $src1 vid 10 | grep "$swp1" | \
+ grep -q "added_by_star_ex"
check_err $? "\"added_by_star_ex\" entry not created after adding (*, G) entry"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
bridge mdb del dev br0 port $swp2 grp $grp src $src1 vid 10
@@ -606,27 +578,23 @@ __cfg_test_port_ip_sg()
RET=0
bridge mdb add dev br0 port $swp1 $grp_key vid 10
- bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "include"
+ bridge -d mdb get dev br0 $grp_key vid 10 | grep -q "include"
check_err $? "Default filter mode is not \"include\""
bridge mdb del dev br0 port $swp1 $grp_key vid 10
# Check that entries can be added as both permanent and temp and that
# group timer is set correctly.
bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
- bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
- grep -q "permanent"
+ bridge -d mdb get dev br0 $grp_key vid 10 | grep -q "permanent"
check_err $? "Entry not added as \"permanent\" when should"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
- grep -q " 0.00"
+ bridge -d -s mdb get dev br0 $grp_key vid 10 | grep -q " 0.00"
check_err $? "\"permanent\" entry has a pending group timer"
bridge mdb del dev br0 port $swp1 $grp_key vid 10
bridge mdb add dev br0 port $swp1 $grp_key temp vid 10
- bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
- grep -q "temp"
+ bridge -d mdb get dev br0 $grp_key vid 10 | grep -q "temp"
check_err $? "Entry not added as \"temp\" when should"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
- grep -q " 0.00"
+ bridge -d -s mdb get dev br0 $grp_key vid 10 | grep -q " 0.00"
check_fail $? "\"temp\" entry has an unpending group timer"
bridge mdb del dev br0 port $swp1 $grp_key vid 10
@@ -650,24 +618,19 @@ __cfg_test_port_ip_sg()
# Check that we can replace available attributes.
bridge mdb add dev br0 port $swp1 $grp_key vid 10 proto 123
bridge mdb replace dev br0 port $swp1 $grp_key vid 10 proto 111
- bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
- grep -q "111"
+ bridge -d mdb get dev br0 $grp_key vid 10 | grep -q "111"
check_err $? "Failed to replace protocol"
bridge mdb replace dev br0 port $swp1 $grp_key vid 10 permanent
- bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
- grep -q "permanent"
+ bridge -d mdb get dev br0 $grp_key vid 10 | grep -q "permanent"
check_err $? "Entry not marked as \"permanent\" after replace"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
- grep -q " 0.00"
+ bridge -d -s mdb get dev br0 $grp_key vid 10 | grep -q " 0.00"
check_err $? "Entry has a pending group timer after replace"
bridge mdb replace dev br0 port $swp1 $grp_key vid 10 temp
- bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
- grep -q "temp"
+ bridge -d mdb get dev br0 $grp_key vid 10 | grep -q "temp"
check_err $? "Entry not marked as \"temp\" after replace"
- bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
- grep -q " 0.00"
+ bridge -d -s mdb get dev br0 $grp_key vid 10 | grep -q " 0.00"
check_fail $? "Entry has an unpending group timer after replace"
bridge mdb del dev br0 port $swp1 $grp_key vid 10
@@ -675,7 +638,7 @@ __cfg_test_port_ip_sg()
# (*, G) ports need to be added to it.
bridge mdb add dev br0 port $swp2 grp $grp vid 10
bridge mdb add dev br0 port $swp1 $grp_key vid 10
- bridge mdb show dev br0 vid 10 | grep "$grp_key" | grep $swp2 | \
+ bridge mdb get dev br0 $grp_key vid 10 | grep $swp2 | \
grep -q "added_by_star_ex"
check_err $? "\"added_by_star_ex\" entry not created after adding (S, G) entry"
bridge mdb del dev br0 port $swp1 $grp_key vid 10
@@ -1102,14 +1065,17 @@ fwd_test()
echo
log_info "# Forwarding tests"
+ # Set the Max Response Delay to 100 centiseconds (1 second) so that the
+ # bridge will start forwarding according to its MDB soon after a
+ # multicast querier is enabled.
+ ip link set dev br0 type bridge mcast_query_response_interval 100
+
# Forwarding according to MDB entries only takes place when the bridge
# detects that there is a valid querier in the network. Set the bridge
# as the querier and assign it a valid IPv6 link-local address to be
# used as the source address for MLD queries.
ip -6 address add fe80::1/64 nodad dev br0
ip link set dev br0 type bridge mcast_querier 1
- # Wait the default Query Response Interval (10 seconds) for the bridge
- # to determine that there are no other queriers in the network.
sleep 10
fwd_test_host
@@ -1117,6 +1083,7 @@ fwd_test()
ip link set dev br0 type bridge mcast_querier 0
ip -6 address del fe80::1/64 dev br0
+ ip link set dev br0 type bridge mcast_query_response_interval 1000
}
ctrl_igmpv3_is_in_test()
@@ -1132,7 +1099,7 @@ ctrl_igmpv3_is_in_test()
$MZ $h1.10 -c 1 -a own -b 01:00:5e:01:01:01 -A 192.0.2.1 -B 239.1.1.1 \
-t ip proto=2,p=$(igmpv3_is_in_get 239.1.1.1 192.0.2.2) -q
- bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -q 192.0.2.2
+ bridge mdb get dev br0 grp 239.1.1.1 src 192.0.2.2 vid 10 &> /dev/null
check_fail $? "Permanent entry affected by IGMP packet"
# Replace the permanent entry with a temporary one and check that after
@@ -1145,12 +1112,10 @@ ctrl_igmpv3_is_in_test()
$MZ $h1.10 -a own -b 01:00:5e:01:01:01 -c 1 -A 192.0.2.1 -B 239.1.1.1 \
-t ip proto=2,p=$(igmpv3_is_in_get 239.1.1.1 192.0.2.2) -q
- bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -v "src" | \
- grep -q 192.0.2.2
+ bridge -d mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q 192.0.2.2
check_err $? "Source not add to source list"
- bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | \
- grep -q "src 192.0.2.2"
+ bridge mdb get dev br0 grp 239.1.1.1 src 192.0.2.2 vid 10 &> /dev/null
check_err $? "(S, G) entry not created for new source"
bridge mdb del dev br0 port $swp1 grp 239.1.1.1 vid 10
@@ -1172,8 +1137,7 @@ ctrl_mldv2_is_in_test()
$MZ -6 $h1.10 -a own -b 33:33:00:00:00:01 -c 1 -A fe80::1 -B ff0e::1 \
-t ip hop=1,next=0,p="$p" -q
- bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \
- grep -q 2001:db8:1::2
+ bridge mdb get dev br0 grp ff0e::1 src 2001:db8:1::2 vid 10 &> /dev/null
check_fail $? "Permanent entry affected by MLD packet"
# Replace the permanent entry with a temporary one and check that after
@@ -1186,12 +1150,10 @@ ctrl_mldv2_is_in_test()
$MZ -6 $h1.10 -a own -b 33:33:00:00:00:01 -c 1 -A fe80::1 -B ff0e::1 \
-t ip hop=1,next=0,p="$p" -q
- bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | grep -v "src" | \
- grep -q 2001:db8:1::2
+ bridge -d mdb get dev br0 grp ff0e::1 vid 10 | grep -q 2001:db8:1::2
check_err $? "Source not add to source list"
- bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \
- grep -q "src 2001:db8:1::2"
+ bridge mdb get dev br0 grp ff0e::1 src 2001:db8:1::2 vid 10 &> /dev/null
check_err $? "(S, G) entry not created for new source"
bridge mdb del dev br0 port $swp1 grp ff0e::1 vid 10
@@ -1208,8 +1170,8 @@ ctrl_test()
ctrl_mldv2_is_in_test
}
-if ! bridge mdb help 2>&1 | grep -q "replace"; then
- echo "SKIP: iproute2 too old, missing bridge mdb replace support"
+if ! bridge mdb help 2>&1 | grep -q "get"; then
+ echo "SKIP: iproute2 too old, missing bridge mdb get support"
exit $ksft_skip
fi
diff --git a/tools/testing/selftests/net/forwarding/tc_actions.sh b/tools/testing/selftests/net/forwarding/tc_actions.sh
index b0f5e55d2d..5896296365 100755
--- a/tools/testing/selftests/net/forwarding/tc_actions.sh
+++ b/tools/testing/selftests/net/forwarding/tc_actions.sh
@@ -235,9 +235,6 @@ mirred_egress_to_ingress_tcp_test()
check_err $? "didn't mirred redirect ICMP"
tc_check_packets "dev $h1 ingress" 102 10
check_err $? "didn't drop mirred ICMP"
- local overlimits=$(tc_rule_stats_get ${h1} 101 egress .overlimits)
- test ${overlimits} = 10
- check_err $? "wrong overlimits, expected 10 got ${overlimits}"
tc filter del dev $h1 egress protocol ip pref 100 handle 100 flower
tc filter del dev $h1 egress protocol ip pref 101 handle 101 flower
diff --git a/tools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh b/tools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh
index 20a7cb7222..c2420bb72c 100755
--- a/tools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh
+++ b/tools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh
@@ -209,14 +209,17 @@ test_l2_miss_multicast()
# both registered and unregistered multicast traffic.
bridge link set dev $swp2 mcast_router 2
+ # Set the Max Response Delay to 100 centiseconds (1 second) so that the
+ # bridge will start forwarding according to its MDB soon after a
+ # multicast querier is enabled.
+ ip link set dev br1 type bridge mcast_query_response_interval 100
+
# Forwarding according to MDB entries only takes place when the bridge
# detects that there is a valid querier in the network. Set the bridge
# as the querier and assign it a valid IPv6 link-local address to be
# used as the source address for MLD queries.
ip link set dev br1 type bridge mcast_querier 1
ip -6 address add fe80::1/64 nodad dev br1
- # Wait the default Query Response Interval (10 seconds) for the bridge
- # to determine that there are no other queriers in the network.
sleep 10
test_l2_miss_multicast_ipv4
@@ -224,6 +227,7 @@ test_l2_miss_multicast()
ip -6 address del fe80::1/64 dev br1
ip link set dev br1 type bridge mcast_querier 0
+ ip link set dev br1 type bridge mcast_query_response_interval 1000
bridge link set dev $swp2 mcast_router 1
}
diff --git a/tools/testing/selftests/net/io_uring_zerocopy_tx.c b/tools/testing/selftests/net/io_uring_zerocopy_tx.c
index 1542877401..76e604e481 100644
--- a/tools/testing/selftests/net/io_uring_zerocopy_tx.c
+++ b/tools/testing/selftests/net/io_uring_zerocopy_tx.c
@@ -36,6 +36,8 @@
#include <sys/un.h>
#include <sys/wait.h>
+#include <io_uring/mini_liburing.h>
+
#define NOTIF_TAG 0xfffffffULL
#define NONZC_TAG 0
#define ZC_TAG 1
@@ -60,272 +62,6 @@ static struct sockaddr_storage cfg_dst_addr;
static char payload[IP_MAXPACKET] __attribute__((aligned(4096)));
-struct io_sq_ring {
- unsigned *head;
- unsigned *tail;
- unsigned *ring_mask;
- unsigned *ring_entries;
- unsigned *flags;
- unsigned *array;
-};
-
-struct io_cq_ring {
- unsigned *head;
- unsigned *tail;
- unsigned *ring_mask;
- unsigned *ring_entries;
- struct io_uring_cqe *cqes;
-};
-
-struct io_uring_sq {
- unsigned *khead;
- unsigned *ktail;
- unsigned *kring_mask;
- unsigned *kring_entries;
- unsigned *kflags;
- unsigned *kdropped;
- unsigned *array;
- struct io_uring_sqe *sqes;
-
- unsigned sqe_head;
- unsigned sqe_tail;
-
- size_t ring_sz;
-};
-
-struct io_uring_cq {
- unsigned *khead;
- unsigned *ktail;
- unsigned *kring_mask;
- unsigned *kring_entries;
- unsigned *koverflow;
- struct io_uring_cqe *cqes;
-
- size_t ring_sz;
-};
-
-struct io_uring {
- struct io_uring_sq sq;
- struct io_uring_cq cq;
- int ring_fd;
-};
-
-#ifdef __alpha__
-# ifndef __NR_io_uring_setup
-# define __NR_io_uring_setup 535
-# endif
-# ifndef __NR_io_uring_enter
-# define __NR_io_uring_enter 536
-# endif
-# ifndef __NR_io_uring_register
-# define __NR_io_uring_register 537
-# endif
-#else /* !__alpha__ */
-# ifndef __NR_io_uring_setup
-# define __NR_io_uring_setup 425
-# endif
-# ifndef __NR_io_uring_enter
-# define __NR_io_uring_enter 426
-# endif
-# ifndef __NR_io_uring_register
-# define __NR_io_uring_register 427
-# endif
-#endif
-
-#if defined(__x86_64) || defined(__i386__)
-#define read_barrier() __asm__ __volatile__("":::"memory")
-#define write_barrier() __asm__ __volatile__("":::"memory")
-#else
-
-#define read_barrier() __sync_synchronize()
-#define write_barrier() __sync_synchronize()
-#endif
-
-static int io_uring_setup(unsigned int entries, struct io_uring_params *p)
-{
- return syscall(__NR_io_uring_setup, entries, p);
-}
-
-static int io_uring_enter(int fd, unsigned int to_submit,
- unsigned int min_complete,
- unsigned int flags, sigset_t *sig)
-{
- return syscall(__NR_io_uring_enter, fd, to_submit, min_complete,
- flags, sig, _NSIG / 8);
-}
-
-static int io_uring_register_buffers(struct io_uring *ring,
- const struct iovec *iovecs,
- unsigned nr_iovecs)
-{
- int ret;
-
- ret = syscall(__NR_io_uring_register, ring->ring_fd,
- IORING_REGISTER_BUFFERS, iovecs, nr_iovecs);
- return (ret < 0) ? -errno : ret;
-}
-
-static int io_uring_mmap(int fd, struct io_uring_params *p,
- struct io_uring_sq *sq, struct io_uring_cq *cq)
-{
- size_t size;
- void *ptr;
- int ret;
-
- sq->ring_sz = p->sq_off.array + p->sq_entries * sizeof(unsigned);
- ptr = mmap(0, sq->ring_sz, PROT_READ | PROT_WRITE,
- MAP_SHARED | MAP_POPULATE, fd, IORING_OFF_SQ_RING);
- if (ptr == MAP_FAILED)
- return -errno;
- sq->khead = ptr + p->sq_off.head;
- sq->ktail = ptr + p->sq_off.tail;
- sq->kring_mask = ptr + p->sq_off.ring_mask;
- sq->kring_entries = ptr + p->sq_off.ring_entries;
- sq->kflags = ptr + p->sq_off.flags;
- sq->kdropped = ptr + p->sq_off.dropped;
- sq->array = ptr + p->sq_off.array;
-
- size = p->sq_entries * sizeof(struct io_uring_sqe);
- sq->sqes = mmap(0, size, PROT_READ | PROT_WRITE,
- MAP_SHARED | MAP_POPULATE, fd, IORING_OFF_SQES);
- if (sq->sqes == MAP_FAILED) {
- ret = -errno;
-err:
- munmap(sq->khead, sq->ring_sz);
- return ret;
- }
-
- cq->ring_sz = p->cq_off.cqes + p->cq_entries * sizeof(struct io_uring_cqe);
- ptr = mmap(0, cq->ring_sz, PROT_READ | PROT_WRITE,
- MAP_SHARED | MAP_POPULATE, fd, IORING_OFF_CQ_RING);
- if (ptr == MAP_FAILED) {
- ret = -errno;
- munmap(sq->sqes, p->sq_entries * sizeof(struct io_uring_sqe));
- goto err;
- }
- cq->khead = ptr + p->cq_off.head;
- cq->ktail = ptr + p->cq_off.tail;
- cq->kring_mask = ptr + p->cq_off.ring_mask;
- cq->kring_entries = ptr + p->cq_off.ring_entries;
- cq->koverflow = ptr + p->cq_off.overflow;
- cq->cqes = ptr + p->cq_off.cqes;
- return 0;
-}
-
-static int io_uring_queue_init(unsigned entries, struct io_uring *ring,
- unsigned flags)
-{
- struct io_uring_params p;
- int fd, ret;
-
- memset(ring, 0, sizeof(*ring));
- memset(&p, 0, sizeof(p));
- p.flags = flags;
-
- fd = io_uring_setup(entries, &p);
- if (fd < 0)
- return fd;
- ret = io_uring_mmap(fd, &p, &ring->sq, &ring->cq);
- if (!ret)
- ring->ring_fd = fd;
- else
- close(fd);
- return ret;
-}
-
-static int io_uring_submit(struct io_uring *ring)
-{
- struct io_uring_sq *sq = &ring->sq;
- const unsigned mask = *sq->kring_mask;
- unsigned ktail, submitted, to_submit;
- int ret;
-
- read_barrier();
- if (*sq->khead != *sq->ktail) {
- submitted = *sq->kring_entries;
- goto submit;
- }
- if (sq->sqe_head == sq->sqe_tail)
- return 0;
-
- ktail = *sq->ktail;
- to_submit = sq->sqe_tail - sq->sqe_head;
- for (submitted = 0; submitted < to_submit; submitted++) {
- read_barrier();
- sq->array[ktail++ & mask] = sq->sqe_head++ & mask;
- }
- if (!submitted)
- return 0;
-
- if (*sq->ktail != ktail) {
- write_barrier();
- *sq->ktail = ktail;
- write_barrier();
- }
-submit:
- ret = io_uring_enter(ring->ring_fd, submitted, 0,
- IORING_ENTER_GETEVENTS, NULL);
- return ret < 0 ? -errno : ret;
-}
-
-static inline void io_uring_prep_send(struct io_uring_sqe *sqe, int sockfd,
- const void *buf, size_t len, int flags)
-{
- memset(sqe, 0, sizeof(*sqe));
- sqe->opcode = (__u8) IORING_OP_SEND;
- sqe->fd = sockfd;
- sqe->addr = (unsigned long) buf;
- sqe->len = len;
- sqe->msg_flags = (__u32) flags;
-}
-
-static inline void io_uring_prep_sendzc(struct io_uring_sqe *sqe, int sockfd,
- const void *buf, size_t len, int flags,
- unsigned zc_flags)
-{
- io_uring_prep_send(sqe, sockfd, buf, len, flags);
- sqe->opcode = (__u8) IORING_OP_SEND_ZC;
- sqe->ioprio = zc_flags;
-}
-
-static struct io_uring_sqe *io_uring_get_sqe(struct io_uring *ring)
-{
- struct io_uring_sq *sq = &ring->sq;
-
- if (sq->sqe_tail + 1 - sq->sqe_head > *sq->kring_entries)
- return NULL;
- return &sq->sqes[sq->sqe_tail++ & *sq->kring_mask];
-}
-
-static int io_uring_wait_cqe(struct io_uring *ring, struct io_uring_cqe **cqe_ptr)
-{
- struct io_uring_cq *cq = &ring->cq;
- const unsigned mask = *cq->kring_mask;
- unsigned head = *cq->khead;
- int ret;
-
- *cqe_ptr = NULL;
- do {
- read_barrier();
- if (head != *cq->ktail) {
- *cqe_ptr = &cq->cqes[head & mask];
- break;
- }
- ret = io_uring_enter(ring->ring_fd, 0, 1,
- IORING_ENTER_GETEVENTS, NULL);
- if (ret < 0)
- return -errno;
- } while (1);
-
- return 0;
-}
-
-static inline void io_uring_cqe_seen(struct io_uring *ring)
-{
- *(&ring->cq)->khead += 1;
- write_barrier();
-}
-
static unsigned long gettimeofday_ms(void)
{
struct timeval tv;
diff --git a/tools/testing/selftests/net/mptcp/config b/tools/testing/selftests/net/mptcp/config
index e317c2e44d..4f80014cae 100644
--- a/tools/testing/selftests/net/mptcp/config
+++ b/tools/testing/selftests/net/mptcp/config
@@ -22,8 +22,11 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SOCKET=m
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IP6_NF_FILTER=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_CLS_ACT=y
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
index 85a8ee9395..4d8c59be1b 100755
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -56,14 +56,14 @@ __chk_nr()
local command="$1"
local expected=$2
local msg="$3"
- local skip="${4:-SKIP}"
+ local skip="${4-SKIP}"
local nr
nr=$(eval $command)
printf "%-50s" "$msg"
- if [ $nr != $expected ]; then
- if [ $nr = "$skip" ] && ! mptcp_lib_expect_all_features; then
+ if [ "$nr" != "$expected" ]; then
+ if [ "$nr" = "$skip" ] && ! mptcp_lib_expect_all_features; then
echo "[ skip ] Feature probably not supported"
mptcp_lib_result_skip "${msg}"
else
@@ -166,9 +166,13 @@ chk_msk_listen()
chk_msk_inuse()
{
local expected=$1
- local msg="$2"
+ local msg="....chk ${2:-${expected}} msk in use"
local listen_nr
+ if [ "${expected}" -eq 0 ]; then
+ msg+=" after flush"
+ fi
+
listen_nr=$(ss -N "${ns}" -Ml | grep -c LISTEN)
expected=$((expected + listen_nr))
@@ -179,7 +183,7 @@ chk_msk_inuse()
sleep 0.1
done
- __chk_nr get_msk_inuse $expected "$msg" 0
+ __chk_nr get_msk_inuse $expected "${msg}" 0
}
# $1: ns, $2: port
@@ -199,6 +203,20 @@ wait_local_port_listen()
done
}
+# $1: cestab nr
+chk_msk_cestab()
+{
+ local expected=$1
+ local msg="....chk ${2:-${expected}} cestab"
+
+ if [ "${expected}" -eq 0 ]; then
+ msg+=" after flush"
+ fi
+
+ __chk_nr "mptcp_lib_get_counter ${ns} MPTcpExtMPCurrEstab" \
+ "${expected}" "${msg}" ""
+}
+
wait_connected()
{
local listener_ns="${1}"
@@ -235,10 +253,12 @@ wait_connected $ns 10000
chk_msk_nr 2 "after MPC handshake "
chk_msk_remote_key_nr 2 "....chk remote_key"
chk_msk_fallback_nr 0 "....chk no fallback"
-chk_msk_inuse 2 "....chk 2 msk in use"
+chk_msk_inuse 2
+chk_msk_cestab 2
flush_pids
-chk_msk_inuse 0 "....chk 0 msk in use after flush"
+chk_msk_inuse 0 "2->0"
+chk_msk_cestab 0 "2->0"
echo "a" | \
timeout ${timeout_test} \
@@ -253,10 +273,12 @@ echo "b" | \
127.0.0.1 >/dev/null &
wait_connected $ns 10001
chk_msk_fallback_nr 1 "check fallback"
-chk_msk_inuse 1 "....chk 1 msk in use"
+chk_msk_inuse 1
+chk_msk_cestab 1
flush_pids
-chk_msk_inuse 0 "....chk 0 msk in use after flush"
+chk_msk_inuse 0 "1->0"
+chk_msk_cestab 0 "1->0"
NR_CLIENTS=100
for I in `seq 1 $NR_CLIENTS`; do
@@ -277,10 +299,12 @@ for I in `seq 1 $NR_CLIENTS`; do
done
wait_msk_nr $((NR_CLIENTS*2)) "many msk socket present"
-chk_msk_inuse $((NR_CLIENTS*2)) "....chk many msk in use"
+chk_msk_inuse $((NR_CLIENTS*2)) "many"
+chk_msk_cestab $((NR_CLIENTS*2)) "many"
flush_pids
-chk_msk_inuse 0 "....chk 0 msk in use after flush"
+chk_msk_inuse 0 "many->0"
+chk_msk_cestab 0 "many->0"
mptcp_lib_result_print_all_tap
exit $ret
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index b1fc8afd07..10cd322e05 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -341,21 +341,6 @@ do_ping()
return 0
}
-# $1: ns, $2: MIB counter
-get_mib_counter()
-{
- local listener_ns="${1}"
- local mib="${2}"
-
- # strip the header
- ip netns exec "${listener_ns}" \
- nstat -z -a "${mib}" | \
- tail -n+2 | \
- while read a count c rest; do
- echo $count
- done
-}
-
# $1: ns, $2: port
wait_local_port_listen()
{
@@ -441,12 +426,12 @@ do_transfer()
nstat -n
fi
- local stat_synrx_last_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX")
- local stat_ackrx_last_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
- local stat_cookietx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesSent")
- local stat_cookierx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesRecv")
- local stat_csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr")
- local stat_csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr")
+ local stat_synrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX")
+ local stat_ackrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
+ local stat_cookietx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent")
+ local stat_cookierx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv")
+ local stat_csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr")
+ local stat_csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr")
timeout ${timeout_test} \
ip netns exec ${listener_ns} \
@@ -509,11 +494,11 @@ do_transfer()
check_transfer $cin $sout "file received by server"
rets=$?
- local stat_synrx_now_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX")
- local stat_ackrx_now_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
- local stat_cookietx_now=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesSent")
- local stat_cookierx_now=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesRecv")
- local stat_ooo_now=$(get_mib_counter "${listener_ns}" "TcpExtTCPOFOQueue")
+ local stat_synrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX")
+ local stat_ackrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
+ local stat_cookietx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent")
+ local stat_cookierx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv")
+ local stat_ooo_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtTCPOFOQueue")
expect_synrx=$((stat_synrx_last_l))
expect_ackrx=$((stat_ackrx_last_l))
@@ -542,8 +527,8 @@ do_transfer()
fi
if $checksum; then
- local csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr")
- local csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr")
+ local csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr")
+ local csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr")
local csum_err_s_nr=$((csum_err_s - stat_csum_err_s))
if [ $csum_err_s_nr -gt 0 ]; then
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 4632a954c7..be10b971e9 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -611,25 +611,9 @@ wait_local_port_listen()
done
}
-# $1: ns ; $2: counter
-get_counter()
-{
- local ns="${1}"
- local counter="${2}"
- local count
-
- count=$(ip netns exec ${ns} nstat -asz "${counter}" | awk 'NR==1 {next} {print $2}')
- if [ -z "${count}" ]; then
- mptcp_lib_fail_if_expected_feature "${counter} counter"
- return 1
- fi
-
- echo "${count}"
-}
-
rm_addr_count()
{
- get_counter "${1}" "MPTcpExtRmAddr"
+ mptcp_lib_get_counter "${1}" "MPTcpExtRmAddr"
}
# $1: ns, $2: old rm_addr counter in $ns
@@ -649,7 +633,7 @@ wait_rm_addr()
rm_sf_count()
{
- get_counter "${1}" "MPTcpExtRmSubflow"
+ mptcp_lib_get_counter "${1}" "MPTcpExtRmSubflow"
}
# $1: ns, $2: old rm_sf counter in $ns
@@ -672,33 +656,20 @@ wait_mpj()
local ns="${1}"
local cnt old_cnt
- old_cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx")
+ old_cnt=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPJoinAckRx")
local i
for i in $(seq 10); do
- cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx")
+ cnt=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPJoinAckRx")
[ "$cnt" = "${old_cnt}" ] || break
sleep 0.1
done
}
-kill_wait()
-{
- kill $1 > /dev/null 2>&1
- wait $1 2>/dev/null
-}
-
kill_events_pids()
{
- kill_wait $evts_ns1_pid
- kill_wait $evts_ns2_pid
-}
-
-kill_tests_wait()
-{
- #shellcheck disable=SC2046
- kill -SIGUSR1 $(ip netns pids $ns2) $(ip netns pids $ns1)
- wait
+ mptcp_lib_kill_wait $evts_ns1_pid
+ mptcp_lib_kill_wait $evts_ns2_pid
}
pm_nl_set_limits()
@@ -1284,7 +1255,7 @@ chk_csum_nr()
fi
print_check "sum"
- count=$(get_counter ${ns1} "MPTcpExtDataCsumErr")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtDataCsumErr")
if [ "$count" != "$csum_ns1" ]; then
extra_msg="$extra_msg ns1=$count"
fi
@@ -1297,7 +1268,7 @@ chk_csum_nr()
print_ok
fi
print_check "csum"
- count=$(get_counter ${ns2} "MPTcpExtDataCsumErr")
+ count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtDataCsumErr")
if [ "$count" != "$csum_ns2" ]; then
extra_msg="$extra_msg ns2=$count"
fi
@@ -1341,7 +1312,7 @@ chk_fail_nr()
fi
print_check "ftx"
- count=$(get_counter ${ns_tx} "MPTcpExtMPFailTx")
+ count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFailTx")
if [ "$count" != "$fail_tx" ]; then
extra_msg="$extra_msg,tx=$count"
fi
@@ -1355,7 +1326,7 @@ chk_fail_nr()
fi
print_check "failrx"
- count=$(get_counter ${ns_rx} "MPTcpExtMPFailRx")
+ count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFailRx")
if [ "$count" != "$fail_rx" ]; then
extra_msg="$extra_msg,rx=$count"
fi
@@ -1388,7 +1359,7 @@ chk_fclose_nr()
fi
print_check "ctx"
- count=$(get_counter ${ns_tx} "MPTcpExtMPFastcloseTx")
+ count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFastcloseTx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$fclose_tx" ]; then
@@ -1399,7 +1370,7 @@ chk_fclose_nr()
fi
print_check "fclzrx"
- count=$(get_counter ${ns_rx} "MPTcpExtMPFastcloseRx")
+ count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFastcloseRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$fclose_rx" ]; then
@@ -1429,7 +1400,7 @@ chk_rst_nr()
fi
print_check "rtx"
- count=$(get_counter ${ns_tx} "MPTcpExtMPRstTx")
+ count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPRstTx")
if [ -z "$count" ]; then
print_skip
# accept more rst than expected except if we don't expect any
@@ -1441,7 +1412,7 @@ chk_rst_nr()
fi
print_check "rstrx"
- count=$(get_counter ${ns_rx} "MPTcpExtMPRstRx")
+ count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPRstRx")
if [ -z "$count" ]; then
print_skip
# accept more rst than expected except if we don't expect any
@@ -1462,7 +1433,7 @@ chk_infi_nr()
local count
print_check "itx"
- count=$(get_counter ${ns2} "MPTcpExtInfiniteMapTx")
+ count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtInfiniteMapTx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$infi_tx" ]; then
@@ -1472,7 +1443,7 @@ chk_infi_nr()
fi
print_check "infirx"
- count=$(get_counter ${ns1} "MPTcpExtInfiniteMapRx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtInfiniteMapRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$infi_rx" ]; then
@@ -1501,7 +1472,7 @@ chk_join_nr()
fi
print_check "syn"
- count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinSynRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$syn_nr" ]; then
@@ -1512,7 +1483,7 @@ chk_join_nr()
print_check "synack"
with_cookie=$(ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies)
- count=$(get_counter ${ns2} "MPTcpExtMPJoinSynAckRx")
+ count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$syn_ack_nr" ]; then
@@ -1529,7 +1500,7 @@ chk_join_nr()
fi
print_check "ack"
- count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinAckRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$ack_nr" ]; then
@@ -1562,8 +1533,8 @@ chk_stale_nr()
print_check "stale"
- stale_nr=$(get_counter ${ns} "MPTcpExtSubflowStale")
- recover_nr=$(get_counter ${ns} "MPTcpExtSubflowRecover")
+ stale_nr=$(mptcp_lib_get_counter ${ns} "MPTcpExtSubflowStale")
+ recover_nr=$(mptcp_lib_get_counter ${ns} "MPTcpExtSubflowRecover")
if [ -z "$stale_nr" ] || [ -z "$recover_nr" ]; then
print_skip
elif [ $stale_nr -lt $stale_min ] ||
@@ -1600,7 +1571,7 @@ chk_add_nr()
timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
print_check "add"
- count=$(get_counter ${ns2} "MPTcpExtAddAddr")
+ count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtAddAddr")
if [ -z "$count" ]; then
print_skip
# if the test configured a short timeout tolerate greater then expected
@@ -1612,7 +1583,7 @@ chk_add_nr()
fi
print_check "echo"
- count=$(get_counter ${ns1} "MPTcpExtEchoAdd")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtEchoAdd")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$echo_nr" ]; then
@@ -1623,7 +1594,7 @@ chk_add_nr()
if [ $port_nr -gt 0 ]; then
print_check "pt"
- count=$(get_counter ${ns2} "MPTcpExtPortAdd")
+ count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtPortAdd")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$port_nr" ]; then
@@ -1633,7 +1604,7 @@ chk_add_nr()
fi
print_check "syn"
- count=$(get_counter ${ns1} "MPTcpExtMPJoinPortSynRx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortSynRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$syn_nr" ]; then
@@ -1644,7 +1615,7 @@ chk_add_nr()
fi
print_check "synack"
- count=$(get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx")
+ count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$syn_ack_nr" ]; then
@@ -1655,7 +1626,7 @@ chk_add_nr()
fi
print_check "ack"
- count=$(get_counter ${ns1} "MPTcpExtMPJoinPortAckRx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortAckRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$ack_nr" ]; then
@@ -1666,7 +1637,7 @@ chk_add_nr()
fi
print_check "syn"
- count=$(get_counter ${ns1} "MPTcpExtMismatchPortSynRx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortSynRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$mis_syn_nr" ]; then
@@ -1677,7 +1648,7 @@ chk_add_nr()
fi
print_check "ack"
- count=$(get_counter ${ns1} "MPTcpExtMismatchPortAckRx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortAckRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$mis_ack_nr" ]; then
@@ -1699,7 +1670,7 @@ chk_add_tx_nr()
timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
print_check "add TX"
- count=$(get_counter ${ns1} "MPTcpExtAddAddrTx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtAddAddrTx")
if [ -z "$count" ]; then
print_skip
# if the test configured a short timeout tolerate greater then expected
@@ -1711,7 +1682,7 @@ chk_add_tx_nr()
fi
print_check "echo TX"
- count=$(get_counter ${ns2} "MPTcpExtEchoAddTx")
+ count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtEchoAddTx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$echo_tx_nr" ]; then
@@ -1749,7 +1720,7 @@ chk_rm_nr()
fi
print_check "rm"
- count=$(get_counter ${addr_ns} "MPTcpExtRmAddr")
+ count=$(mptcp_lib_get_counter ${addr_ns} "MPTcpExtRmAddr")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$rm_addr_nr" ]; then
@@ -1759,18 +1730,21 @@ chk_rm_nr()
fi
print_check "rmsf"
- count=$(get_counter ${subflow_ns} "MPTcpExtRmSubflow")
+ count=$(mptcp_lib_get_counter ${subflow_ns} "MPTcpExtRmSubflow")
if [ -z "$count" ]; then
print_skip
elif [ -n "$simult" ]; then
local cnt suffix
- cnt=$(get_counter ${addr_ns} "MPTcpExtRmSubflow")
+ cnt=$(mptcp_lib_get_counter ${addr_ns} "MPTcpExtRmSubflow")
# in case of simult flush, the subflow removal count on each side is
# unreliable
count=$((count + cnt))
- [ "$count" != "$rm_subflow_nr" ] && suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]"
+ if [ "$count" != "$rm_subflow_nr" ]; then
+ suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]"
+ extra_msg="$extra_msg simult"
+ fi
if [ $count -ge "$rm_subflow_nr" ] && \
[ "$count" -le "$((rm_subflow_nr *2 ))" ]; then
print_ok "$suffix"
@@ -1791,7 +1765,7 @@ chk_rm_tx_nr()
local rm_addr_tx_nr=$1
print_check "rm TX"
- count=$(get_counter ${ns2} "MPTcpExtRmAddrTx")
+ count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtRmAddrTx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$rm_addr_tx_nr" ]; then
@@ -1808,7 +1782,7 @@ chk_prio_nr()
local count
print_check "ptx"
- count=$(get_counter ${ns1} "MPTcpExtMPPrioTx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioTx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$mp_prio_nr_tx" ]; then
@@ -1818,7 +1792,7 @@ chk_prio_nr()
fi
print_check "prx"
- count=$(get_counter ${ns1} "MPTcpExtMPPrioRx")
+ count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$mp_prio_nr_rx" ]; then
@@ -1918,7 +1892,7 @@ wait_attempt_fail()
while [ $time -lt $timeout_ms ]; do
local cnt
- cnt=$(get_counter ${ns} "TcpAttemptFails")
+ cnt=$(mptcp_lib_get_counter ${ns} "TcpAttemptFails")
[ "$cnt" = 1 ] && return 1
time=$((time + 100))
@@ -3436,7 +3410,7 @@ userspace_tests()
chk_rm_nr 1 1 invert
chk_mptcp_info subflows 0 subflows 0
kill_events_pids
- wait $tests_pid
+ mptcp_lib_kill_wait $tests_pid
fi
# userspace pm create destroy subflow
@@ -3455,7 +3429,7 @@ userspace_tests()
chk_rm_nr 1 1
chk_mptcp_info subflows 0 subflows 0
kill_events_pids
- wait $tests_pid
+ mptcp_lib_kill_wait $tests_pid
fi
}
@@ -3469,7 +3443,8 @@ endpoint_tests()
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
speed=slow \
- run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
+ run_tests $ns1 $ns2 10.0.1.1 &
+ local tests_pid=$!
wait_mpj $ns1
pm_nl_check_endpoint "creation" \
@@ -3484,7 +3459,7 @@ endpoint_tests()
pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
pm_nl_check_endpoint "modif is allowed" \
$ns2 10.0.2.2 id 1 flags signal
- kill_tests_wait
+ mptcp_lib_kill_wait $tests_pid
fi
if reset "delete and re-add" &&
@@ -3493,7 +3468,8 @@ endpoint_tests()
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
test_linkfail=4 speed=20 \
- run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
+ run_tests $ns1 $ns2 10.0.1.1 &
+ local tests_pid=$!
wait_mpj $ns2
chk_subflow_nr "before delete" 2
@@ -3508,7 +3484,7 @@ endpoint_tests()
wait_mpj $ns2
chk_subflow_nr "after re-add" 2
chk_mptcp_info subflows 1 subflows 1
- kill_tests_wait
+ mptcp_lib_kill_wait $tests_pid
fi
}
diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
index 92a5befe80..2b10f200de 100644
--- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
@@ -6,7 +6,7 @@ readonly KSFT_FAIL=1
readonly KSFT_SKIP=4
# shellcheck disable=SC2155 # declare and assign separately
-readonly KSFT_TEST=$(basename "${0}" | sed 's/\.sh$//g')
+readonly KSFT_TEST="${MPTCP_LIB_KSFT_TEST:-$(basename "${0}" .sh)}"
MPTCP_LIB_SUBTESTS=()
@@ -207,3 +207,28 @@ mptcp_lib_result_print_all_tap() {
printf "%s\n" "${subtest}"
done
}
+
+# $1: PID
+mptcp_lib_kill_wait() {
+ [ "${1}" -eq 0 ] && return 0
+
+ kill -SIGUSR1 "${1}" > /dev/null 2>&1
+ kill "${1}" > /dev/null 2>&1
+ wait "${1}" 2>/dev/null
+}
+
+# $1: ns, $2: MIB counter
+mptcp_lib_get_counter() {
+ local ns="${1}"
+ local counter="${2}"
+ local count
+
+ count=$(ip netns exec "${ns}" nstat -asz "${counter}" |
+ awk 'NR==1 {next} {print $2}')
+ if [ -z "${count}" ]; then
+ mptcp_lib_fail_if_expected_feature "${counter} counter"
+ return 1
+ fi
+
+ echo "${count}"
+}
diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
index 8c8694f21e..a817af6616 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
@@ -11,7 +11,6 @@ cout=""
ksft_skip=4
timeout_poll=30
timeout_test=$((timeout_poll * 2 + 1))
-mptcp_connect=""
iptables="iptables"
ip6tables="ip6tables"
diff --git a/tools/testing/selftests/net/mptcp/pm_netlink.sh b/tools/testing/selftests/net/mptcp/pm_netlink.sh
index 8f4ff123a7..71899a3ffa 100755
--- a/tools/testing/selftests/net/mptcp/pm_netlink.sh
+++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh
@@ -183,7 +183,7 @@ check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
subflow 10.0.1.1" " (nobackup)"
# fullmesh support has been added later
-ip netns exec $ns1 ./pm_nl_ctl set id 1 flags fullmesh
+ip netns exec $ns1 ./pm_nl_ctl set id 1 flags fullmesh 2>/dev/null
if ip netns exec $ns1 ./pm_nl_ctl dump | grep -q "fullmesh" ||
mptcp_lib_expect_all_features; then
check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
@@ -194,6 +194,12 @@ subflow 10.0.1.1" " (nofullmesh)"
ip netns exec $ns1 ./pm_nl_ctl set id 1 flags backup,fullmesh
check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
subflow,backup,fullmesh 10.0.1.1" " (backup,fullmesh)"
+else
+ for st in fullmesh nofullmesh backup,fullmesh; do
+ st=" (${st})"
+ printf "%-50s%s\n" "${st}" "[SKIP]"
+ mptcp_lib_result_skip "${st}"
+ done
fi
mptcp_lib_result_print_all_tap
diff --git a/tools/testing/selftests/net/mptcp/settings b/tools/testing/selftests/net/mptcp/settings
index 79b65bdf05..abc5648b59 100644
--- a/tools/testing/selftests/net/mptcp/settings
+++ b/tools/testing/selftests/net/mptcp/settings
@@ -1 +1 @@
-timeout=1200
+timeout=1800
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh
index ce9203b817..9096bf5794 100755
--- a/tools/testing/selftests/net/mptcp/simult_flows.sh
+++ b/tools/testing/selftests/net/mptcp/simult_flows.sh
@@ -267,7 +267,8 @@ run_test()
[ $bail -eq 0 ] || exit $ret
fi
- printf "%-60s" "$msg - reverse direction"
+ msg+=" - reverse direction"
+ printf "%-60s" "${msg}"
do_transfer $large $small $time
lret=$?
mptcp_lib_result_code "${lret}" "${msg}"
diff --git a/tools/testing/selftests/net/mptcp/userspace_pm.sh b/tools/testing/selftests/net/mptcp/userspace_pm.sh
index b25a3e33eb..0e748068ee 100755
--- a/tools/testing/selftests/net/mptcp/userspace_pm.sh
+++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh
@@ -75,7 +75,7 @@ print_test()
{
test_name="${1}"
- _printf "%-63s" "${test_name}"
+ _printf "%-68s" "${test_name}"
}
print_results()
@@ -108,15 +108,6 @@ test_fail()
mptcp_lib_result_fail "${test_name}"
}
-kill_wait()
-{
- [ $1 -eq 0 ] && return 0
-
- kill -SIGUSR1 $1 > /dev/null 2>&1
- kill $1 > /dev/null 2>&1
- wait $1 2>/dev/null
-}
-
# This function is used in the cleanup trap
#shellcheck disable=SC2317
cleanup()
@@ -128,7 +119,7 @@ cleanup()
for pid in $client4_pid $server4_pid $client6_pid $server6_pid\
$server_evts_pid $client_evts_pid
do
- kill_wait $pid
+ mptcp_lib_kill_wait $pid
done
local netns
@@ -210,7 +201,7 @@ make_connection()
fi
:>"$client_evts"
if [ $client_evts_pid -ne 0 ]; then
- kill_wait $client_evts_pid
+ mptcp_lib_kill_wait $client_evts_pid
fi
ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1 &
client_evts_pid=$!
@@ -219,7 +210,7 @@ make_connection()
fi
:>"$server_evts"
if [ $server_evts_pid -ne 0 ]; then
- kill_wait $server_evts_pid
+ mptcp_lib_kill_wait $server_evts_pid
fi
ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1 &
server_evts_pid=$!
@@ -564,7 +555,7 @@ verify_subflow_events()
local remid
local info
- info="${e_saddr} (${e_from}) => ${e_daddr} (${e_to})"
+ info="${e_saddr} (${e_from}) => ${e_daddr}:${e_dport} (${e_to})"
if [ "$e_type" = "$SUB_ESTABLISHED" ]
then
@@ -627,7 +618,7 @@ test_subflows()
"10.0.2.2" "$client4_port" "23" "$client_addr_id" "ns1" "ns2"
# Delete the listener from the client ns, if one was created
- kill_wait $listener_pid
+ mptcp_lib_kill_wait $listener_pid
local sport
sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$server_evts")
@@ -666,7 +657,7 @@ test_subflows()
"$client_addr_id" "ns1" "ns2"
# Delete the listener from the client ns, if one was created
- kill_wait $listener_pid
+ mptcp_lib_kill_wait $listener_pid
sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$server_evts")
@@ -705,7 +696,7 @@ test_subflows()
"$client_addr_id" "ns1" "ns2"
# Delete the listener from the client ns, if one was created
- kill_wait $listener_pid
+ mptcp_lib_kill_wait $listener_pid
sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$server_evts")
@@ -743,7 +734,7 @@ test_subflows()
"10.0.2.1" "$app4_port" "23" "$server_addr_id" "ns2" "ns1"
# Delete the listener from the server ns, if one was created
- kill_wait $listener_pid
+ mptcp_lib_kill_wait $listener_pid
sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$client_evts")
@@ -782,7 +773,7 @@ test_subflows()
"$server_addr_id" "ns2" "ns1"
# Delete the listener from the server ns, if one was created
- kill_wait $listener_pid
+ mptcp_lib_kill_wait $listener_pid
sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$client_evts")
@@ -819,7 +810,7 @@ test_subflows()
"10.0.2.2" "10.0.2.1" "$new4_port" "23" "$server_addr_id" "ns2" "ns1"
# Delete the listener from the server ns, if one was created
- kill_wait $listener_pid
+ mptcp_lib_kill_wait $listener_pid
sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$client_evts")
@@ -865,7 +856,7 @@ test_subflows_v4_v6_mix()
"$server_addr_id" "ns2" "ns1"
# Delete the listener from the server ns, if one was created
- kill_wait $listener_pid
+ mptcp_lib_kill_wait $listener_pid
sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$client_evts")
@@ -896,9 +887,10 @@ test_prio()
# Check TX
print_test "MP_PRIO TX"
- count=$(ip netns exec "$ns2" nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ $count != 1 ]; then
+ count=$(mptcp_lib_get_counter "$ns2" "MPTcpExtMPPrioTx")
+ if [ -z "$count" ]; then
+ test_skip
+ elif [ $count != 1 ]; then
test_fail "Count != 1: ${count}"
else
test_pass
@@ -906,9 +898,10 @@ test_prio()
# Check RX
print_test "MP_PRIO RX"
- count=$(ip netns exec "$ns1" nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ $count != 1 ]; then
+ count=$(mptcp_lib_get_counter "$ns1" "MPTcpExtMPPrioRx")
+ if [ -z "$count" ]; then
+ test_skip
+ elif [ $count != 1 ]; then
test_fail "Count != 1: ${count}"
else
test_pass
@@ -982,7 +975,7 @@ test_listener()
sleep 0.5
# Delete the listener from the client ns, if one was created
- kill_wait $listener_pid
+ mptcp_lib_kill_wait $listener_pid
sleep 0.5
verify_listener_events $client_evts $LISTENER_CLOSED $AF_INET 10.0.2.2 $client4_port
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 39a0e01f85..cd8a580974 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -1864,8 +1864,9 @@ static char *random_msg(int len)
n += i;
len -= i;
}
- i = snprintf(m + n, olen - n, "%.*s", len,
- "abcdefghijklmnopqrstuvwxyz");
+
+ snprintf(m + n, olen - n, "%.*s", len,
+ "abcdefghijklmnopqrstuvwxyz");
return m;
}
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index b3b2dc5a63..d65fdd407d 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# Check that route PMTU values match expectations, and that initial device MTU
@@ -198,8 +198,8 @@
# - pmtu_ipv6_route_change
# Same as above but with IPv6
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
+source lib.sh
+source net_helper.sh
PAUSE_ON_FAIL=no
VERBOSE=0
@@ -268,16 +268,6 @@ tests="
pmtu_ipv4_route_change ipv4: PMTU exception w/route replace 1
pmtu_ipv6_route_change ipv6: PMTU exception w/route replace 1"
-NS_A="ns-A"
-NS_B="ns-B"
-NS_C="ns-C"
-NS_R1="ns-R1"
-NS_R2="ns-R2"
-ns_a="ip netns exec ${NS_A}"
-ns_b="ip netns exec ${NS_B}"
-ns_c="ip netns exec ${NS_C}"
-ns_r1="ip netns exec ${NS_R1}"
-ns_r2="ip netns exec ${NS_R2}"
# Addressing and routing for tests with routers: four network segments, with
# index SEGMENT between 1 and 4, a common prefix (PREFIX4 or PREFIX6) and an
# identifier ID, which is 1 for hosts (A and B), 2 for routers (R1 and R2).
@@ -543,13 +533,17 @@ setup_ip6ip6() {
}
setup_namespaces() {
+ setup_ns NS_A NS_B NS_C NS_R1 NS_R2
for n in ${NS_A} ${NS_B} ${NS_C} ${NS_R1} ${NS_R2}; do
- ip netns add ${n} || return 1
-
# Disable DAD, so that we don't have to wait to use the
# configured IPv6 addresses
ip netns exec ${n} sysctl -q net/ipv6/conf/default/accept_dad=0
done
+ ns_a="ip netns exec ${NS_A}"
+ ns_b="ip netns exec ${NS_B}"
+ ns_c="ip netns exec ${NS_C}"
+ ns_r1="ip netns exec ${NS_R1}"
+ ns_r2="ip netns exec ${NS_R2}"
}
setup_veth() {
@@ -714,23 +708,23 @@ setup_xfrm6() {
}
setup_xfrm4udp() {
- setup_xfrm 4 ${veth4_a_addr} ${veth4_b_addr} "encap espinudp 4500 4500 0.0.0.0"
- setup_nettest_xfrm 4 4500
+ setup_xfrm 4 ${veth4_a_addr} ${veth4_b_addr} "encap espinudp 4500 4500 0.0.0.0" && \
+ setup_nettest_xfrm 4 4500
}
setup_xfrm6udp() {
- setup_xfrm 6 ${veth6_a_addr} ${veth6_b_addr} "encap espinudp 4500 4500 0.0.0.0"
- setup_nettest_xfrm 6 4500
+ setup_xfrm 6 ${veth6_a_addr} ${veth6_b_addr} "encap espinudp 4500 4500 0.0.0.0" && \
+ setup_nettest_xfrm 6 4500
}
setup_xfrm4udprouted() {
- setup_xfrm 4 ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "encap espinudp 4500 4500 0.0.0.0"
- setup_nettest_xfrm 4 4500
+ setup_xfrm 4 ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "encap espinudp 4500 4500 0.0.0.0" && \
+ setup_nettest_xfrm 4 4500
}
setup_xfrm6udprouted() {
- setup_xfrm 6 ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 "encap espinudp 4500 4500 0.0.0.0"
- setup_nettest_xfrm 6 4500
+ setup_xfrm 6 ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 "encap espinudp 4500 4500 0.0.0.0" && \
+ setup_nettest_xfrm 6 4500
}
setup_routing_old() {
@@ -839,7 +833,7 @@ setup_bridge() {
run_cmd ${ns_a} ip link set br0 up
run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C
- run_cmd ${ns_c} ip link set veth_A-C netns ns-A
+ run_cmd ${ns_c} ip link set veth_A-C netns ${NS_A}
run_cmd ${ns_a} ip link set veth_A-C up
run_cmd ${ns_c} ip link set veth_C-A up
@@ -944,9 +938,7 @@ cleanup() {
done
socat_pids=
- for n in ${NS_A} ${NS_B} ${NS_C} ${NS_R1} ${NS_R2}; do
- ip netns del ${n} 2> /dev/null
- done
+ cleanup_all_ns
ip link del veth_A-C 2>/dev/null
ip link del veth_A-R1 2>/dev/null
@@ -1345,13 +1337,15 @@ test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception() {
TCPDST="TCP:[${dst}]:50000"
fi
${ns_b} socat -T 3 -u -6 TCP-LISTEN:50000 STDOUT > $tmpoutfile &
+ local socat_pid=$!
- sleep 1
+ wait_local_port_listen ${NS_B} 50000 tcp
- dd if=/dev/zero of=/dev/stdout status=none bs=1M count=1 | ${target} socat -T 3 -u STDIN $TCPDST,connect-timeout=3
+ dd if=/dev/zero status=none bs=1M count=1 | ${target} socat -T 3 -u STDIN $TCPDST,connect-timeout=3
size=$(du -sb $tmpoutfile)
size=${size%%/tmp/*}
+ wait ${socat_pid}
[ $size -ne 1048576 ] && err "File size $size mismatches exepcted value in locally bridged vxlan test" && return 1
done
@@ -1963,6 +1957,13 @@ check_command() {
return 0
}
+check_running() {
+ pid=${1}
+ cmd=${2}
+
+ [ "$(cat /proc/${pid}/cmdline 2>/dev/null | tr -d '\0')" = "{cmd}" ]
+}
+
test_cleanup_vxlanX_exception() {
outer="${1}"
encap="vxlan"
@@ -1993,11 +1994,12 @@ test_cleanup_vxlanX_exception() {
${ns_a} ip link del dev veth_A-R1 &
iplink_pid=$!
- sleep 1
- if [ "$(cat /proc/${iplink_pid}/cmdline 2>/dev/null | tr -d '\0')" = "iplinkdeldevveth_A-R1" ]; then
- err " can't delete veth device in a timely manner, PMTU dst likely leaked"
- return 1
- fi
+ for i in $(seq 1 20); do
+ check_running ${iplink_pid} "iplinkdeldevveth_A-R1" || return 0
+ sleep 0.1
+ done
+ err " can't delete veth device in a timely manner, PMTU dst likely leaked"
+ return 1
}
test_cleanup_ipv6_exception() {
diff --git a/tools/testing/selftests/net/route_localnet.sh b/tools/testing/selftests/net/route_localnet.sh
index 116bfeab72..e08701c750 100755
--- a/tools/testing/selftests/net/route_localnet.sh
+++ b/tools/testing/selftests/net/route_localnet.sh
@@ -18,8 +18,10 @@ setup() {
ip route del 127.0.0.0/8 dev lo table local
ip netns exec "${PEER_NS}" ip route del 127.0.0.0/8 dev lo table local
- ifconfig veth0 127.25.3.4/24 up
- ip netns exec "${PEER_NS}" ifconfig veth1 127.25.3.14/24 up
+ ip address add 127.25.3.4/24 dev veth0
+ ip link set dev veth0 up
+ ip netns exec "${PEER_NS}" ip address add 127.25.3.14/24 dev veth1
+ ip netns exec "${PEER_NS}" ip link set dev veth1 up
ip route flush cache
ip netns exec "${PEER_NS}" ip route flush cache
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh
index 488f496436..26827ea4e3 100755
--- a/tools/testing/selftests/net/rtnetlink.sh
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -31,6 +31,9 @@ ALL_TESTS="
"
devdummy="test-dummy0"
+VERBOSE=0
+PAUSE=no
+PAUSE_ON_FAIL=no
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
@@ -51,35 +54,102 @@ check_fail()
fi
}
+run_cmd_common()
+{
+ local cmd="$*"
+ local out
+ if [ "$VERBOSE" = "1" ]; then
+ echo "COMMAND: ${cmd}"
+ fi
+ out=$($cmd 2>&1)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+ return $rc
+}
+
+run_cmd() {
+ run_cmd_common "$@"
+ rc=$?
+ check_err $rc
+ return $rc
+}
+run_cmd_fail()
+{
+ run_cmd_common "$@"
+ rc=$?
+ check_fail $rc
+ return $rc
+}
+
+run_cmd_grep_common()
+{
+ local find="$1"; shift
+ local cmd="$*"
+ local out
+ if [ "$VERBOSE" = "1" ]; then
+ echo "COMMAND: ${cmd} 2>&1 | grep -q '${find}'"
+ fi
+ out=$($cmd 2>&1 | grep -q "${find}" 2>&1)
+ return $?
+}
+
+run_cmd_grep() {
+ run_cmd_grep_common "$@"
+ rc=$?
+ check_err $rc
+ return $rc
+}
+
+run_cmd_grep_fail()
+{
+ run_cmd_grep_common "$@"
+ rc=$?
+ check_fail $rc
+ return $rc
+}
+
+end_test()
+{
+ echo "$*"
+ [ "${VERBOSE}" = "1" ] && echo
+
+ if [[ $ret -ne 0 ]] && [[ "${PAUSE_ON_FAIL}" = "yes" ]]; then
+ echo "Hit enter to continue"
+ read a
+ fi;
+
+ if [ "${PAUSE}" = "yes" ]; then
+ echo "Hit enter to continue"
+ read a
+ fi
+
+}
+
+
kci_add_dummy()
{
- ip link add name "$devdummy" type dummy
- check_err $?
- ip link set "$devdummy" up
- check_err $?
+ run_cmd ip link add name "$devdummy" type dummy
+ run_cmd ip link set "$devdummy" up
}
kci_del_dummy()
{
- ip link del dev "$devdummy"
- check_err $?
+ run_cmd ip link del dev "$devdummy"
}
kci_test_netconf()
{
dev="$1"
r=$ret
-
- ip netconf show dev "$dev" > /dev/null
- check_err $?
-
+ run_cmd ip netconf show dev "$dev"
for f in 4 6; do
- ip -$f netconf show dev "$dev" > /dev/null
- check_err $?
+ run_cmd ip -$f netconf show dev "$dev"
done
if [ $ret -ne 0 ] ;then
- echo "FAIL: ip netconf show $dev"
+ end_test "FAIL: ip netconf show $dev"
test $r -eq 0 && ret=0
return 1
fi
@@ -92,43 +162,27 @@ kci_test_bridge()
vlandev="testbr-vlan1"
local ret=0
- ip link add name "$devbr" type bridge
- check_err $?
-
- ip link set dev "$devdummy" master "$devbr"
- check_err $?
-
- ip link set "$devbr" up
- check_err $?
-
- ip link add link "$devbr" name "$vlandev" type vlan id 1
- check_err $?
- ip addr add dev "$vlandev" 10.200.7.23/30
- check_err $?
- ip -6 addr add dev "$vlandev" dead:42::1234/64
- check_err $?
- ip -d link > /dev/null
- check_err $?
- ip r s t all > /dev/null
- check_err $?
+ run_cmd ip link add name "$devbr" type bridge
+ run_cmd ip link set dev "$devdummy" master "$devbr"
+ run_cmd ip link set "$devbr" up
+ run_cmd ip link add link "$devbr" name "$vlandev" type vlan id 1
+ run_cmd ip addr add dev "$vlandev" 10.200.7.23/30
+ run_cmd ip -6 addr add dev "$vlandev" dead:42::1234/64
+ run_cmd ip -d link
+ run_cmd ip r s t all
for name in "$devbr" "$vlandev" "$devdummy" ; do
kci_test_netconf "$name"
done
-
- ip -6 addr del dev "$vlandev" dead:42::1234/64
- check_err $?
-
- ip link del dev "$vlandev"
- check_err $?
- ip link del dev "$devbr"
- check_err $?
+ run_cmd ip -6 addr del dev "$vlandev" dead:42::1234/64
+ run_cmd ip link del dev "$vlandev"
+ run_cmd ip link del dev "$devbr"
if [ $ret -ne 0 ];then
- echo "FAIL: bridge setup"
+ end_test "FAIL: bridge setup"
return 1
fi
- echo "PASS: bridge setup"
+ end_test "PASS: bridge setup"
}
@@ -139,34 +193,23 @@ kci_test_gre()
loc=10.0.0.1
local ret=0
- ip tunnel add $gredev mode gre remote $rem local $loc ttl 1
- check_err $?
- ip link set $gredev up
- check_err $?
- ip addr add 10.23.7.10 dev $gredev
- check_err $?
- ip route add 10.23.8.0/30 dev $gredev
- check_err $?
- ip addr add dev "$devdummy" 10.23.7.11/24
- check_err $?
- ip link > /dev/null
- check_err $?
- ip addr > /dev/null
- check_err $?
+ run_cmd ip tunnel add $gredev mode gre remote $rem local $loc ttl 1
+ run_cmd ip link set $gredev up
+ run_cmd ip addr add 10.23.7.10 dev $gredev
+ run_cmd ip route add 10.23.8.0/30 dev $gredev
+ run_cmd ip addr add dev "$devdummy" 10.23.7.11/24
+ run_cmd ip link
+ run_cmd ip addr
kci_test_netconf "$gredev"
-
- ip addr del dev "$devdummy" 10.23.7.11/24
- check_err $?
-
- ip link del $gredev
- check_err $?
+ run_cmd ip addr del dev "$devdummy" 10.23.7.11/24
+ run_cmd ip link del $gredev
if [ $ret -ne 0 ];then
- echo "FAIL: gre tunnel endpoint"
+ end_test "FAIL: gre tunnel endpoint"
return 1
fi
- echo "PASS: gre tunnel endpoint"
+ end_test "PASS: gre tunnel endpoint"
}
# tc uses rtnetlink too, for full tc testing
@@ -176,56 +219,40 @@ kci_test_tc()
dev=lo
local ret=0
- tc qdisc add dev "$dev" root handle 1: htb
- check_err $?
- tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit
- check_err $?
- tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256
- check_err $?
- tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256
- check_err $?
- tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256
- check_err $?
- tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10
- check_err $?
- tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10
- check_err $?
- tc filter show dev "$dev" parent 1:0 > /dev/null
- check_err $?
- tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32
- check_err $?
- tc filter show dev "$dev" parent 1:0 > /dev/null
- check_err $?
- tc qdisc del dev "$dev" root handle 1: htb
- check_err $?
+ run_cmd tc qdisc add dev "$dev" root handle 1: htb
+ run_cmd tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit
+ run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256
+ run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256
+ run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256
+ run_cmd tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10
+ run_cmd tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10
+ run_cmd tc filter show dev "$dev" parent 1:0
+ run_cmd tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32
+ run_cmd tc filter show dev "$dev" parent 1:0
+ run_cmd tc qdisc del dev "$dev" root handle 1: htb
if [ $ret -ne 0 ];then
- echo "FAIL: tc htb hierarchy"
+ end_test "FAIL: tc htb hierarchy"
return 1
fi
- echo "PASS: tc htb hierarchy"
+ end_test "PASS: tc htb hierarchy"
}
kci_test_polrouting()
{
local ret=0
- ip rule add fwmark 1 lookup 100
- check_err $?
- ip route add local 0.0.0.0/0 dev lo table 100
- check_err $?
- ip r s t all > /dev/null
- check_err $?
- ip rule del fwmark 1 lookup 100
- check_err $?
- ip route del local 0.0.0.0/0 dev lo table 100
- check_err $?
+ run_cmd ip rule add fwmark 1 lookup 100
+ run_cmd ip route add local 0.0.0.0/0 dev lo table 100
+ run_cmd ip r s t all
+ run_cmd ip rule del fwmark 1 lookup 100
+ run_cmd ip route del local 0.0.0.0/0 dev lo table 100
if [ $ret -ne 0 ];then
- echo "FAIL: policy route test"
+ end_test "FAIL: policy route test"
return 1
fi
- echo "PASS: policy routing"
+ end_test "PASS: policy routing"
}
kci_test_route_get()
@@ -233,65 +260,51 @@ kci_test_route_get()
local hash_policy=$(sysctl -n net.ipv4.fib_multipath_hash_policy)
local ret=0
-
- ip route get 127.0.0.1 > /dev/null
- check_err $?
- ip route get 127.0.0.1 dev "$devdummy" > /dev/null
- check_err $?
- ip route get ::1 > /dev/null
- check_err $?
- ip route get fe80::1 dev "$devdummy" > /dev/null
- check_err $?
- ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x10 mark 0x1 > /dev/null
- check_err $?
- ip route get ::1 from ::1 iif lo oif lo tos 0x10 mark 0x1 > /dev/null
- check_err $?
- ip addr add dev "$devdummy" 10.23.7.11/24
- check_err $?
- ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy" > /dev/null
- check_err $?
- ip route add 10.23.8.0/24 \
+ run_cmd ip route get 127.0.0.1
+ run_cmd ip route get 127.0.0.1 dev "$devdummy"
+ run_cmd ip route get ::1
+ run_cmd ip route get fe80::1 dev "$devdummy"
+ run_cmd ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x10 mark 0x1
+ run_cmd ip route get ::1 from ::1 iif lo oif lo tos 0x10 mark 0x1
+ run_cmd ip addr add dev "$devdummy" 10.23.7.11/24
+ run_cmd ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy"
+ run_cmd ip route add 10.23.8.0/24 \
nexthop via 10.23.7.13 dev "$devdummy" \
nexthop via 10.23.7.14 dev "$devdummy"
- check_err $?
+
sysctl -wq net.ipv4.fib_multipath_hash_policy=0
- ip route get 10.23.8.11 > /dev/null
- check_err $?
+ run_cmd ip route get 10.23.8.11
sysctl -wq net.ipv4.fib_multipath_hash_policy=1
- ip route get 10.23.8.11 > /dev/null
- check_err $?
+ run_cmd ip route get 10.23.8.11
sysctl -wq net.ipv4.fib_multipath_hash_policy="$hash_policy"
- ip route del 10.23.8.0/24
- check_err $?
- ip addr del dev "$devdummy" 10.23.7.11/24
- check_err $?
+ run_cmd ip route del 10.23.8.0/24
+ run_cmd ip addr del dev "$devdummy" 10.23.7.11/24
+
if [ $ret -ne 0 ];then
- echo "FAIL: route get"
+ end_test "FAIL: route get"
return 1
fi
- echo "PASS: route get"
+ end_test "PASS: route get"
}
kci_test_addrlft()
{
for i in $(seq 10 100) ;do
lft=$(((RANDOM%3) + 1))
- ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1))
- check_err $?
+ run_cmd ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1))
done
sleep 5
-
- ip addr show dev "$devdummy" | grep "10.23.11."
+ run_cmd_grep_fail "10.23.11." ip addr show dev "$devdummy"
if [ $? -eq 0 ]; then
- echo "FAIL: preferred_lft addresses remaining"
check_err 1
+ end_test "FAIL: preferred_lft addresses remaining"
return
fi
- echo "PASS: preferred_lft addresses have expired"
+ end_test "PASS: preferred_lft addresses have expired"
}
kci_test_promote_secondaries()
@@ -310,27 +323,17 @@ kci_test_promote_secondaries()
[ $promote -eq 0 ] && sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=0
- echo "PASS: promote_secondaries complete"
+ end_test "PASS: promote_secondaries complete"
}
kci_test_addrlabel()
{
local ret=0
-
- ip addrlabel add prefix dead::/64 dev lo label 1
- check_err $?
-
- ip addrlabel list |grep -q "prefix dead::/64 dev lo label 1"
- check_err $?
-
- ip addrlabel del prefix dead::/64 dev lo label 1 2> /dev/null
- check_err $?
-
- ip addrlabel add prefix dead::/64 label 1 2> /dev/null
- check_err $?
-
- ip addrlabel del prefix dead::/64 label 1 2> /dev/null
- check_err $?
+ run_cmd ip addrlabel add prefix dead::/64 dev lo label 1
+ run_cmd_grep "prefix dead::/64 dev lo label 1" ip addrlabel list
+ run_cmd ip addrlabel del prefix dead::/64 dev lo label 1
+ run_cmd ip addrlabel add prefix dead::/64 label 1
+ run_cmd ip addrlabel del prefix dead::/64 label 1
# concurrent add/delete
for i in $(seq 1 1000); do
@@ -346,11 +349,11 @@ kci_test_addrlabel()
ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null
if [ $ret -ne 0 ];then
- echo "FAIL: ipv6 addrlabel"
+ end_test "FAIL: ipv6 addrlabel"
return 1
fi
- echo "PASS: ipv6 addrlabel"
+ end_test "PASS: ipv6 addrlabel"
}
kci_test_ifalias()
@@ -358,35 +361,28 @@ kci_test_ifalias()
local ret=0
namewant=$(uuidgen)
syspathname="/sys/class/net/$devdummy/ifalias"
-
- ip link set dev "$devdummy" alias "$namewant"
- check_err $?
+ run_cmd ip link set dev "$devdummy" alias "$namewant"
if [ $ret -ne 0 ]; then
- echo "FAIL: cannot set interface alias of $devdummy to $namewant"
+ end_test "FAIL: cannot set interface alias of $devdummy to $namewant"
return 1
fi
-
- ip link show "$devdummy" | grep -q "alias $namewant"
- check_err $?
+ run_cmd_grep "alias $namewant" ip link show "$devdummy"
if [ -r "$syspathname" ] ; then
read namehave < "$syspathname"
if [ "$namewant" != "$namehave" ]; then
- echo "FAIL: did set ifalias $namewant but got $namehave"
+ end_test "FAIL: did set ifalias $namewant but got $namehave"
return 1
fi
namewant=$(uuidgen)
echo "$namewant" > "$syspathname"
- ip link show "$devdummy" | grep -q "alias $namewant"
- check_err $?
+ run_cmd_grep "alias $namewant" ip link show "$devdummy"
# sysfs interface allows to delete alias again
echo "" > "$syspathname"
-
- ip link show "$devdummy" | grep -q "alias $namewant"
- check_fail $?
+ run_cmd_grep_fail "alias $namewant" ip link show "$devdummy"
for i in $(seq 1 100); do
uuidgen > "$syspathname" &
@@ -395,57 +391,48 @@ kci_test_ifalias()
wait
# re-add the alias -- kernel should free mem when dummy dev is removed
- ip link set dev "$devdummy" alias "$namewant"
- check_err $?
+ run_cmd ip link set dev "$devdummy" alias "$namewant"
+
fi
if [ $ret -ne 0 ]; then
- echo "FAIL: set interface alias $devdummy to $namewant"
+ end_test "FAIL: set interface alias $devdummy to $namewant"
return 1
fi
- echo "PASS: set ifalias $namewant for $devdummy"
+ end_test "PASS: set ifalias $namewant for $devdummy"
}
kci_test_vrf()
{
vrfname="test-vrf"
local ret=0
-
- ip link show type vrf 2>/dev/null
+ run_cmd ip link show type vrf
if [ $? -ne 0 ]; then
- echo "SKIP: vrf: iproute2 too old"
+ end_test "SKIP: vrf: iproute2 too old"
return $ksft_skip
fi
-
- ip link add "$vrfname" type vrf table 10
- check_err $?
+ run_cmd ip link add "$vrfname" type vrf table 10
if [ $ret -ne 0 ];then
- echo "FAIL: can't add vrf interface, skipping test"
+ end_test "FAIL: can't add vrf interface, skipping test"
return 0
fi
-
- ip -br link show type vrf | grep -q "$vrfname"
- check_err $?
+ run_cmd_grep "$vrfname" ip -br link show type vrf
if [ $ret -ne 0 ];then
- echo "FAIL: created vrf device not found"
+ end_test "FAIL: created vrf device not found"
return 1
fi
- ip link set dev "$vrfname" up
- check_err $?
-
- ip link set dev "$devdummy" master "$vrfname"
- check_err $?
- ip link del dev "$vrfname"
- check_err $?
+ run_cmd ip link set dev "$vrfname" up
+ run_cmd ip link set dev "$devdummy" master "$vrfname"
+ run_cmd ip link del dev "$vrfname"
if [ $ret -ne 0 ];then
- echo "FAIL: vrf"
+ end_test "FAIL: vrf"
return 1
fi
- echo "PASS: vrf"
+ end_test "PASS: vrf"
}
kci_test_encap_vxlan()
@@ -454,84 +441,44 @@ kci_test_encap_vxlan()
vxlan="test-vxlan0"
vlan="test-vlan0"
testns="$1"
-
- ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \
- dev "$devdummy" dstport 4789 2>/dev/null
+ run_cmd ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \
+ dev "$devdummy" dstport 4789
if [ $? -ne 0 ]; then
- echo "FAIL: can't add vxlan interface, skipping test"
+ end_test "FAIL: can't add vxlan interface, skipping test"
return 0
fi
- check_err $?
- ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan"
- check_err $?
-
- ip -netns "$testns" link set up dev "$vxlan"
- check_err $?
-
- ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1
- check_err $?
+ run_cmd ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan"
+ run_cmd ip -netns "$testns" link set up dev "$vxlan"
+ run_cmd ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1
# changelink testcases
- ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy" 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64
- check_err $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning
- check_err $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan proxy 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan norsc 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan external 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan gbp 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan gpe 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link del "$vxlan"
- check_err $?
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy"
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit
+
+ run_cmd ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64
+ run_cmd ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning
+
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan proxy
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan norsc
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan external
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan gbp
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan gpe
+ run_cmd ip -netns "$testns" link del "$vxlan"
if [ $ret -ne 0 ]; then
- echo "FAIL: vxlan"
+ end_test "FAIL: vxlan"
return 1
fi
- echo "PASS: vxlan"
+ end_test "PASS: vxlan"
}
kci_test_encap_fou()
@@ -539,39 +486,32 @@ kci_test_encap_fou()
local ret=0
name="test-fou"
testns="$1"
-
- ip fou help 2>&1 |grep -q 'Usage: ip fou'
+ run_cmd_grep 'Usage: ip fou' ip fou help
if [ $? -ne 0 ];then
- echo "SKIP: fou: iproute2 too old"
+ end_test "SKIP: fou: iproute2 too old"
return $ksft_skip
fi
if ! /sbin/modprobe -q -n fou; then
- echo "SKIP: module fou is not found"
+ end_test "SKIP: module fou is not found"
return $ksft_skip
fi
/sbin/modprobe -q fou
- ip -netns "$testns" fou add port 7777 ipproto 47 2>/dev/null
+
+ run_cmd ip -netns "$testns" fou add port 7777 ipproto 47
if [ $? -ne 0 ];then
- echo "FAIL: can't add fou port 7777, skipping test"
+ end_test "FAIL: can't add fou port 7777, skipping test"
return 1
fi
-
- ip -netns "$testns" fou add port 8888 ipproto 4
- check_err $?
-
- ip -netns "$testns" fou del port 9999 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" fou del port 7777
- check_err $?
-
+ run_cmd ip -netns "$testns" fou add port 8888 ipproto 4
+ run_cmd_fail ip -netns "$testns" fou del port 9999
+ run_cmd ip -netns "$testns" fou del port 7777
if [ $ret -ne 0 ]; then
- echo "FAIL: fou"
+ end_test "FAIL: fou"s
return 1
fi
- echo "PASS: fou"
+ end_test "PASS: fou"
}
# test various encap methods, use netns to avoid unwanted interference
@@ -579,25 +519,16 @@ kci_test_encap()
{
testns="testns"
local ret=0
-
- ip netns add "$testns"
+ run_cmd ip netns add "$testns"
if [ $? -ne 0 ]; then
- echo "SKIP encap tests: cannot add net namespace $testns"
+ end_test "SKIP encap tests: cannot add net namespace $testns"
return $ksft_skip
fi
-
- ip -netns "$testns" link set lo up
- check_err $?
-
- ip -netns "$testns" link add name "$devdummy" type dummy
- check_err $?
- ip -netns "$testns" link set "$devdummy" up
- check_err $?
-
- kci_test_encap_vxlan "$testns"
- check_err $?
- kci_test_encap_fou "$testns"
- check_err $?
+ run_cmd ip -netns "$testns" link set lo up
+ run_cmd ip -netns "$testns" link add name "$devdummy" type dummy
+ run_cmd ip -netns "$testns" link set "$devdummy" up
+ run_cmd kci_test_encap_vxlan "$testns"
+ run_cmd kci_test_encap_fou "$testns"
ip netns del "$testns"
return $ret
@@ -607,41 +538,28 @@ kci_test_macsec()
{
msname="test_macsec0"
local ret=0
-
- ip macsec help 2>&1 | grep -q "^Usage: ip macsec"
+ run_cmd_grep "^Usage: ip macsec" ip macsec help
if [ $? -ne 0 ]; then
- echo "SKIP: macsec: iproute2 too old"
+ end_test "SKIP: macsec: iproute2 too old"
return $ksft_skip
fi
-
- ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on
- check_err $?
+ run_cmd ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on
if [ $ret -ne 0 ];then
- echo "FAIL: can't add macsec interface, skipping test"
+ end_test "FAIL: can't add macsec interface, skipping test"
return 1
fi
-
- ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
- check_err $?
-
- ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
- check_err $?
-
- ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef
- check_err $?
-
- ip macsec show > /dev/null
- check_err $?
-
- ip link del dev "$msname"
- check_err $?
+ run_cmd ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
+ run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
+ run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef
+ run_cmd ip macsec show
+ run_cmd ip link del dev "$msname"
if [ $ret -ne 0 ];then
- echo "FAIL: macsec"
+ end_test "FAIL: macsec"
return 1
fi
- echo "PASS: macsec"
+ end_test "PASS: macsec"
}
kci_test_macsec_offload()
@@ -650,19 +568,18 @@ kci_test_macsec_offload()
sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/
probed=false
local ret=0
-
- ip macsec help 2>&1 | grep -q "^Usage: ip macsec"
+ run_cmd_grep "^Usage: ip macsec" ip macsec help
if [ $? -ne 0 ]; then
- echo "SKIP: macsec: iproute2 too old"
+ end_test "SKIP: macsec: iproute2 too old"
return $ksft_skip
fi
# setup netdevsim since dummydev doesn't have offload support
if [ ! -w /sys/bus/netdevsim/new_device ] ; then
- modprobe -q netdevsim
- check_err $?
+ run_cmd modprobe -q netdevsim
+
if [ $ret -ne 0 ]; then
- echo "SKIP: macsec_offload can't load netdevsim"
+ end_test "SKIP: macsec_offload can't load netdevsim"
return $ksft_skip
fi
probed=true
@@ -675,43 +592,25 @@ kci_test_macsec_offload()
ip link set $dev up
if [ ! -d $sysfsd ] ; then
- echo "FAIL: macsec_offload can't create device $dev"
+ end_test "FAIL: macsec_offload can't create device $dev"
return 1
fi
-
- ethtool -k $dev | grep -q 'macsec-hw-offload: on'
+ run_cmd_grep 'macsec-hw-offload: on' ethtool -k $dev
if [ $? -eq 1 ] ; then
- echo "FAIL: macsec_offload netdevsim doesn't support MACsec offload"
+ end_test "FAIL: macsec_offload netdevsim doesn't support MACsec offload"
return 1
fi
-
- ip link add link $dev kci_macsec1 type macsec port 4 offload mac
- check_err $?
-
- ip link add link $dev kci_macsec2 type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac
- check_err $?
-
- ip link add link $dev kci_macsec3 type macsec sci abbacdde01020304 offload mac
- check_err $?
-
- ip link add link $dev kci_macsec4 type macsec port 8 offload mac 2> /dev/null
- check_fail $?
+ run_cmd ip link add link $dev kci_macsec1 type macsec port 4 offload mac
+ run_cmd ip link add link $dev kci_macsec2 type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac
+ run_cmd ip link add link $dev kci_macsec3 type macsec sci abbacdde01020304 offload mac
+ run_cmd_fail ip link add link $dev kci_macsec4 type macsec port 8 offload mac
msname=kci_macsec1
-
- ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
- check_err $?
-
- ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
- check_err $?
-
- ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \
+ run_cmd ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
+ run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
+ run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \
key 00 0123456789abcdef0123456789abcdef
- check_err $?
-
- ip macsec add "$msname" rx port 1235 address "1c:ed:de:ad:be:ef" 2> /dev/null
- check_fail $?
-
+ run_cmd_fail ip macsec add "$msname" rx port 1235 address "1c:ed:de:ad:be:ef"
# clean up any leftovers
for msdev in kci_macsec{1,2,3,4} ; do
ip link del $msdev 2> /dev/null
@@ -720,10 +619,10 @@ kci_test_macsec_offload()
$probed && rmmod netdevsim
if [ $ret -ne 0 ]; then
- echo "FAIL: macsec_offload"
+ end_test "FAIL: macsec_offload"
return 1
fi
- echo "PASS: macsec_offload"
+ end_test "PASS: macsec_offload"
}
#-------------------------------------------------------------------
@@ -755,8 +654,7 @@ kci_test_ipsec()
ip addr add $srcip dev $devdummy
# flush to be sure there's nothing configured
- ip x s flush ; ip x p flush
- check_err $?
+ run_cmd ip x s flush ; ip x p flush
# start the monitor in the background
tmpfile=`mktemp /var/run/ipsectestXXX`
@@ -764,72 +662,57 @@ kci_test_ipsec()
sleep 0.2
ipsecid="proto esp src $srcip dst $dstip spi 0x07"
- ip x s add $ipsecid \
+ run_cmd ip x s add $ipsecid \
mode transport reqid 0x07 replay-window 32 \
$algo sel src $srcip/24 dst $dstip/24
- check_err $?
- lines=`ip x s list | grep $srcip | grep $dstip | wc -l`
- test $lines -eq 2
- check_err $?
- ip x s count | grep -q "SAD count 1"
- check_err $?
+ lines=`ip x s list | grep $srcip | grep $dstip | wc -l`
+ run_cmd test $lines -eq 2
+ run_cmd_grep "SAD count 1" ip x s count
lines=`ip x s get $ipsecid | grep $srcip | grep $dstip | wc -l`
- test $lines -eq 2
- check_err $?
-
- ip x s delete $ipsecid
- check_err $?
+ run_cmd test $lines -eq 2
+ run_cmd ip x s delete $ipsecid
lines=`ip x s list | wc -l`
- test $lines -eq 0
- check_err $?
+ run_cmd test $lines -eq 0
ipsecsel="dir out src $srcip/24 dst $dstip/24"
- ip x p add $ipsecsel \
+ run_cmd ip x p add $ipsecsel \
tmpl proto esp src $srcip dst $dstip \
spi 0x07 mode transport reqid 0x07
- check_err $?
+
lines=`ip x p list | grep $srcip | grep $dstip | wc -l`
- test $lines -eq 2
- check_err $?
+ run_cmd test $lines -eq 2
- ip x p count | grep -q "SPD IN 0 OUT 1 FWD 0"
- check_err $?
+ run_cmd_grep "SPD IN 0 OUT 1 FWD 0" ip x p count
lines=`ip x p get $ipsecsel | grep $srcip | grep $dstip | wc -l`
- test $lines -eq 2
- check_err $?
+ run_cmd test $lines -eq 2
- ip x p delete $ipsecsel
- check_err $?
+ run_cmd ip x p delete $ipsecsel
lines=`ip x p list | wc -l`
- test $lines -eq 0
- check_err $?
+ run_cmd test $lines -eq 0
# check the monitor results
kill $mpid
lines=`wc -l $tmpfile | cut "-d " -f1`
- test $lines -eq 20
- check_err $?
+ run_cmd test $lines -eq 20
rm -rf $tmpfile
# clean up any leftovers
- ip x s flush
- check_err $?
- ip x p flush
- check_err $?
+ run_cmd ip x s flush
+ run_cmd ip x p flush
ip addr del $srcip/32 dev $devdummy
if [ $ret -ne 0 ]; then
- echo "FAIL: ipsec"
+ end_test "FAIL: ipsec"
return 1
fi
- echo "PASS: ipsec"
+ end_test "PASS: ipsec"
}
#-------------------------------------------------------------------
@@ -857,10 +740,9 @@ kci_test_ipsec_offload()
# setup netdevsim since dummydev doesn't have offload support
if [ ! -w /sys/bus/netdevsim/new_device ] ; then
- modprobe -q netdevsim
- check_err $?
+ run_cmd modprobe -q netdevsim
if [ $ret -ne 0 ]; then
- echo "SKIP: ipsec_offload can't load netdevsim"
+ end_test "SKIP: ipsec_offload can't load netdevsim"
return $ksft_skip
fi
probed=true
@@ -874,11 +756,11 @@ kci_test_ipsec_offload()
ip addr add $srcip dev $dev
ip link set $dev up
if [ ! -d $sysfsd ] ; then
- echo "FAIL: ipsec_offload can't create device $dev"
+ end_test "FAIL: ipsec_offload can't create device $dev"
return 1
fi
if [ ! -f $sysfsf ] ; then
- echo "FAIL: ipsec_offload netdevsim doesn't support IPsec offload"
+ end_test "FAIL: ipsec_offload netdevsim doesn't support IPsec offload"
return 1
fi
@@ -886,40 +768,39 @@ kci_test_ipsec_offload()
ip x s flush ; ip x p flush
# create offloaded SAs, both in and out
- ip x p add dir out src $srcip/24 dst $dstip/24 \
+ run_cmd ip x p add dir out src $srcip/24 dst $dstip/24 \
tmpl proto esp src $srcip dst $dstip spi 9 \
mode transport reqid 42
- check_err $?
- ip x p add dir in src $dstip/24 dst $srcip/24 \
+
+ run_cmd ip x p add dir in src $dstip/24 dst $srcip/24 \
tmpl proto esp src $dstip dst $srcip spi 9 \
mode transport reqid 42
- check_err $?
- ip x s add proto esp src $srcip dst $dstip spi 9 \
+ run_cmd ip x s add proto esp src $srcip dst $dstip spi 9 \
mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \
offload dev $dev dir out
- check_err $?
- ip x s add proto esp src $dstip dst $srcip spi 9 \
+
+ run_cmd ip x s add proto esp src $dstip dst $srcip spi 9 \
mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \
offload dev $dev dir in
- check_err $?
+
if [ $ret -ne 0 ]; then
- echo "FAIL: ipsec_offload can't create SA"
+ end_test "FAIL: ipsec_offload can't create SA"
return 1
fi
# does offload show up in ip output
lines=`ip x s list | grep -c "crypto offload parameters: dev $dev dir"`
if [ $lines -ne 2 ] ; then
- echo "FAIL: ipsec_offload SA offload missing from list output"
check_err 1
+ end_test "FAIL: ipsec_offload SA offload missing from list output"
fi
# use ping to exercise the Tx path
ping -I $dev -c 3 -W 1 -i 0 $dstip >/dev/null
# does driver have correct offload info
- diff $sysfsf - << EOF
+ run_cmd diff $sysfsf - << EOF
SA count=2 tx=3
sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000
sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
@@ -929,7 +810,7 @@ sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
sa[1] key=0x34333231 38373635 32313039 36353433
EOF
if [ $? -ne 0 ] ; then
- echo "FAIL: ipsec_offload incorrect driver data"
+ end_test "FAIL: ipsec_offload incorrect driver data"
check_err 1
fi
@@ -938,8 +819,8 @@ EOF
ip x p flush
lines=`grep -c "SA count=0" $sysfsf`
if [ $lines -ne 1 ] ; then
- echo "FAIL: ipsec_offload SA not removed from driver"
check_err 1
+ end_test "FAIL: ipsec_offload SA not removed from driver"
fi
# clean up any leftovers
@@ -947,10 +828,10 @@ EOF
$probed && rmmod netdevsim
if [ $ret -ne 0 ]; then
- echo "FAIL: ipsec_offload"
+ end_test "FAIL: ipsec_offload"
return 1
fi
- echo "PASS: ipsec_offload"
+ end_test "PASS: ipsec_offload"
}
kci_test_gretap()
@@ -959,46 +840,38 @@ kci_test_gretap()
DEV_NS=gretap00
local ret=0
- ip netns add "$testns"
+ run_cmd ip netns add "$testns"
if [ $? -ne 0 ]; then
- echo "SKIP gretap tests: cannot add net namespace $testns"
+ end_test "SKIP gretap tests: cannot add net namespace $testns"
return $ksft_skip
fi
- ip link help gretap 2>&1 | grep -q "^Usage:"
+ run_cmd_grep "^Usage:" ip link help gretap
if [ $? -ne 0 ];then
- echo "SKIP: gretap: iproute2 too old"
+ end_test "SKIP: gretap: iproute2 too old"
ip netns del "$testns"
return $ksft_skip
fi
# test native tunnel
- ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \
key 102 local 172.16.1.100 remote 172.16.1.200
- check_err $?
-
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test external mode
- ip -netns "$testns" link add dev "$DEV_NS" type gretap external
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type gretap external
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
if [ $ret -ne 0 ]; then
- echo "FAIL: gretap"
+ end_test "FAIL: gretap"
ip netns del "$testns"
return 1
fi
- echo "PASS: gretap"
+ end_test "PASS: gretap"
ip netns del "$testns"
}
@@ -1009,46 +882,38 @@ kci_test_ip6gretap()
DEV_NS=ip6gretap00
local ret=0
- ip netns add "$testns"
+ run_cmd ip netns add "$testns"
if [ $? -ne 0 ]; then
- echo "SKIP ip6gretap tests: cannot add net namespace $testns"
+ end_test "SKIP ip6gretap tests: cannot add net namespace $testns"
return $ksft_skip
fi
- ip link help ip6gretap 2>&1 | grep -q "^Usage:"
+ run_cmd_grep "^Usage:" ip link help ip6gretap
if [ $? -ne 0 ];then
- echo "SKIP: ip6gretap: iproute2 too old"
+ end_test "SKIP: ip6gretap: iproute2 too old"
ip netns del "$testns"
return $ksft_skip
fi
# test native tunnel
- ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \
key 102 local fc00:100::1 remote fc00:100::2
- check_err $?
- ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test external mode
- ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
if [ $ret -ne 0 ]; then
- echo "FAIL: ip6gretap"
+ end_test "FAIL: ip6gretap"
ip netns del "$testns"
return 1
fi
- echo "PASS: ip6gretap"
+ end_test "PASS: ip6gretap"
ip netns del "$testns"
}
@@ -1058,62 +923,47 @@ kci_test_erspan()
testns="testns"
DEV_NS=erspan00
local ret=0
-
- ip link help erspan 2>&1 | grep -q "^Usage:"
+ run_cmd_grep "^Usage:" ip link help erspan
if [ $? -ne 0 ];then
- echo "SKIP: erspan: iproute2 too old"
+ end_test "SKIP: erspan: iproute2 too old"
return $ksft_skip
fi
-
- ip netns add "$testns"
+ run_cmd ip netns add "$testns"
if [ $? -ne 0 ]; then
- echo "SKIP erspan tests: cannot add net namespace $testns"
+ end_test "SKIP erspan tests: cannot add net namespace $testns"
return $ksft_skip
fi
# test native tunnel erspan v1
- ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
key 102 local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 1 erspan 488
- check_err $?
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test native tunnel erspan v2
- ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
key 102 local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 2 erspan_dir ingress erspan_hwid 7
- check_err $?
-
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test external mode
- ip -netns "$testns" link add dev "$DEV_NS" type erspan external
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan external
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
if [ $ret -ne 0 ]; then
- echo "FAIL: erspan"
+ end_test "FAIL: erspan"
ip netns del "$testns"
return 1
fi
- echo "PASS: erspan"
+ end_test "PASS: erspan"
ip netns del "$testns"
}
@@ -1123,63 +973,49 @@ kci_test_ip6erspan()
testns="testns"
DEV_NS=ip6erspan00
local ret=0
-
- ip link help ip6erspan 2>&1 | grep -q "^Usage:"
+ run_cmd_grep "^Usage:" ip link help ip6erspan
if [ $? -ne 0 ];then
- echo "SKIP: ip6erspan: iproute2 too old"
+ end_test "SKIP: ip6erspan: iproute2 too old"
return $ksft_skip
fi
-
- ip netns add "$testns"
+ run_cmd ip netns add "$testns"
if [ $? -ne 0 ]; then
- echo "SKIP ip6erspan tests: cannot add net namespace $testns"
+ end_test "SKIP ip6erspan tests: cannot add net namespace $testns"
return $ksft_skip
fi
# test native tunnel ip6erspan v1
- ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
key 102 local fc00:100::1 remote fc00:100::2 \
erspan_ver 1 erspan 488
- check_err $?
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test native tunnel ip6erspan v2
- ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
key 102 local fc00:100::1 remote fc00:100::2 \
erspan_ver 2 erspan_dir ingress erspan_hwid 7
- check_err $?
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test external mode
- ip -netns "$testns" link add dev "$DEV_NS" \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" \
type ip6erspan external
- check_err $?
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
if [ $ret -ne 0 ]; then
- echo "FAIL: ip6erspan"
+ end_test "FAIL: ip6erspan"
ip netns del "$testns"
return 1
fi
- echo "PASS: ip6erspan"
+ end_test "PASS: ip6erspan"
ip netns del "$testns"
}
@@ -1195,45 +1031,35 @@ kci_test_fdb_get()
dstip="10.0.2.3"
local ret=0
- bridge fdb help 2>&1 |grep -q 'bridge fdb get'
+ run_cmd_grep 'bridge fdb get' bridge fdb help
if [ $? -ne 0 ];then
- echo "SKIP: fdb get tests: iproute2 too old"
+ end_test "SKIP: fdb get tests: iproute2 too old"
return $ksft_skip
fi
- ip netns add testns
+ run_cmd ip netns add testns
if [ $? -ne 0 ]; then
- echo "SKIP fdb get tests: cannot add net namespace $testns"
+ end_test "SKIP fdb get tests: cannot add net namespace $testns"
return $ksft_skip
fi
-
- $IP link add "$vxlandev" type vxlan id 10 local $localip \
- dstport 4789 2>/dev/null
- check_err $?
- $IP link add name "$brdev" type bridge &>/dev/null
- check_err $?
- $IP link set dev "$vxlandev" master "$brdev" &>/dev/null
- check_err $?
- $BRIDGE fdb add $test_mac dev "$vxlandev" master &>/dev/null
- check_err $?
- $BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self &>/dev/null
- check_err $?
-
- $BRIDGE fdb get $test_mac brport "$vxlandev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
- check_err $?
- $BRIDGE fdb get $test_mac br "$brdev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
- check_err $?
- $BRIDGE fdb get $test_mac dev "$vxlandev" self 2>/dev/null | grep -q "dev $vxlandev dst $dstip"
- check_err $?
+ run_cmd $IP link add "$vxlandev" type vxlan id 10 local $localip \
+ dstport 4789
+ run_cmd $IP link add name "$brdev" type bridge
+ run_cmd $IP link set dev "$vxlandev" master "$brdev"
+ run_cmd $BRIDGE fdb add $test_mac dev "$vxlandev" master
+ run_cmd $BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self
+ run_cmd_grep "dev $vxlandev master $brdev" $BRIDGE fdb get $test_mac brport "$vxlandev"
+ run_cmd_grep "dev $vxlandev master $brdev" $BRIDGE fdb get $test_mac br "$brdev"
+ run_cmd_grep "dev $vxlandev dst $dstip" $BRIDGE fdb get $test_mac dev "$vxlandev" self
ip netns del testns &>/dev/null
if [ $ret -ne 0 ]; then
- echo "FAIL: bridge fdb get"
+ end_test "FAIL: bridge fdb get"
return 1
fi
- echo "PASS: bridge fdb get"
+ end_test "PASS: bridge fdb get"
}
kci_test_neigh_get()
@@ -1243,50 +1069,38 @@ kci_test_neigh_get()
dstip6=dead::2
local ret=0
- ip neigh help 2>&1 |grep -q 'ip neigh get'
+ run_cmd_grep 'ip neigh get' ip neigh help
if [ $? -ne 0 ];then
- echo "SKIP: fdb get tests: iproute2 too old"
+ end_test "SKIP: fdb get tests: iproute2 too old"
return $ksft_skip
fi
# ipv4
- ip neigh add $dstip lladdr $dstmac dev "$devdummy" > /dev/null
- check_err $?
- ip neigh get $dstip dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
- check_err $?
- ip neigh del $dstip lladdr $dstmac dev "$devdummy" > /dev/null
- check_err $?
+ run_cmd ip neigh add $dstip lladdr $dstmac dev "$devdummy"
+ run_cmd_grep "$dstmac" ip neigh get $dstip dev "$devdummy"
+ run_cmd ip neigh del $dstip lladdr $dstmac dev "$devdummy"
# ipv4 proxy
- ip neigh add proxy $dstip dev "$devdummy" > /dev/null
- check_err $?
- ip neigh get proxy $dstip dev "$devdummy" 2>/dev/null | grep -q "$dstip"
- check_err $?
- ip neigh del proxy $dstip dev "$devdummy" > /dev/null
- check_err $?
+ run_cmd ip neigh add proxy $dstip dev "$devdummy"
+ run_cmd_grep "$dstip" ip neigh get proxy $dstip dev "$devdummy"
+ run_cmd ip neigh del proxy $dstip dev "$devdummy"
# ipv6
- ip neigh add $dstip6 lladdr $dstmac dev "$devdummy" > /dev/null
- check_err $?
- ip neigh get $dstip6 dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
- check_err $?
- ip neigh del $dstip6 lladdr $dstmac dev "$devdummy" > /dev/null
- check_err $?
+ run_cmd ip neigh add $dstip6 lladdr $dstmac dev "$devdummy"
+ run_cmd_grep "$dstmac" ip neigh get $dstip6 dev "$devdummy"
+ run_cmd ip neigh del $dstip6 lladdr $dstmac dev "$devdummy"
# ipv6 proxy
- ip neigh add proxy $dstip6 dev "$devdummy" > /dev/null
- check_err $?
- ip neigh get proxy $dstip6 dev "$devdummy" 2>/dev/null | grep -q "$dstip6"
- check_err $?
- ip neigh del proxy $dstip6 dev "$devdummy" > /dev/null
- check_err $?
+ run_cmd ip neigh add proxy $dstip6 dev "$devdummy"
+ run_cmd_grep "$dstip6" ip neigh get proxy $dstip6 dev "$devdummy"
+ run_cmd ip neigh del proxy $dstip6 dev "$devdummy"
if [ $ret -ne 0 ];then
- echo "FAIL: neigh get"
+ end_test "FAIL: neigh get"
return 1
fi
- echo "PASS: neigh get"
+ end_test "PASS: neigh get"
}
kci_test_bridge_parent_id()
@@ -1296,10 +1110,9 @@ kci_test_bridge_parent_id()
probed=false
if [ ! -w /sys/bus/netdevsim/new_device ] ; then
- modprobe -q netdevsim
- check_err $?
+ run_cmd modprobe -q netdevsim
if [ $ret -ne 0 ]; then
- echo "SKIP: bridge_parent_id can't load netdevsim"
+ end_test "SKIP: bridge_parent_id can't load netdevsim"
return $ksft_skip
fi
probed=true
@@ -1312,13 +1125,11 @@ kci_test_bridge_parent_id()
udevadm settle
dev10=`ls ${sysfsnet}10/net/`
dev20=`ls ${sysfsnet}20/net/`
-
- ip link add name test-bond0 type bond mode 802.3ad
- ip link set dev $dev10 master test-bond0
- ip link set dev $dev20 master test-bond0
- ip link add name test-br0 type bridge
- ip link set dev test-bond0 master test-br0
- check_err $?
+ run_cmd ip link add name test-bond0 type bond mode 802.3ad
+ run_cmd ip link set dev $dev10 master test-bond0
+ run_cmd ip link set dev $dev20 master test-bond0
+ run_cmd ip link add name test-br0 type bridge
+ run_cmd ip link set dev test-bond0 master test-br0
# clean up any leftovers
ip link del dev test-br0
@@ -1328,10 +1139,10 @@ kci_test_bridge_parent_id()
$probed && rmmod netdevsim
if [ $ret -ne 0 ]; then
- echo "FAIL: bridge_parent_id"
+ end_test "FAIL: bridge_parent_id"
return 1
fi
- echo "PASS: bridge_parent_id"
+ end_test "PASS: bridge_parent_id"
}
address_get_proto()
@@ -1409,10 +1220,10 @@ do_test_address_proto()
ip address del dev "$devdummy" "$addr3"
if [ $ret -ne 0 ]; then
- echo "FAIL: address proto $what"
+ end_test "FAIL: address proto $what"
return 1
fi
- echo "PASS: address proto $what"
+ end_test "PASS: address proto $what"
}
kci_test_address_proto()
@@ -1435,7 +1246,7 @@ kci_test_rtnl()
kci_add_dummy
if [ $ret -ne 0 ];then
- echo "FAIL: cannot add dummy interface"
+ end_test "FAIL: cannot add dummy interface"
return 1
fi
@@ -1455,31 +1266,39 @@ usage: ${0##*/} OPTS
-t <test> Test(s) to run (default: all)
(options: $(echo $ALL_TESTS))
+ -v Verbose mode (show commands and output)
+ -P Pause after every test
+ -p Pause after every failing test before cleanup (for debugging)
EOF
}
#check for needed privileges
if [ "$(id -u)" -ne 0 ];then
- echo "SKIP: Need root privileges"
+ end_test "SKIP: Need root privileges"
exit $ksft_skip
fi
for x in ip tc;do
$x -Version 2>/dev/null >/dev/null
if [ $? -ne 0 ];then
- echo "SKIP: Could not run test without the $x tool"
+ end_test "SKIP: Could not run test without the $x tool"
exit $ksft_skip
fi
done
-while getopts t:h o; do
+while getopts t:hvpP o; do
case $o in
t) TESTS=$OPTARG;;
+ v) VERBOSE=1;;
+ p) PAUSE_ON_FAIL=yes;;
+ P) PAUSE=yes;;
h) usage; exit 0;;
*) usage; exit 1;;
esac
done
+[ $PAUSE = "yes" ] && PAUSE_ON_FAIL="no"
+
kci_test_rtnl
exit $?
diff --git a/tools/testing/selftests/net/setup_veth.sh b/tools/testing/selftests/net/setup_veth.sh
index 1003ddf7b3..227fd1076f 100644
--- a/tools/testing/selftests/net/setup_veth.sh
+++ b/tools/testing/selftests/net/setup_veth.sh
@@ -8,7 +8,7 @@ setup_veth_ns() {
local -r ns_mac="$4"
[[ -e /var/run/netns/"${ns_name}" ]] || ip netns add "${ns_name}"
- echo 100000 > "/sys/class/net/${ns_dev}/gro_flush_timeout"
+ echo 1000000 > "/sys/class/net/${ns_dev}/gro_flush_timeout"
ip link set dev "${ns_dev}" netns "${ns_name}" mtu 65535
ip -netns "${ns_name}" link set dev "${ns_dev}" up
diff --git a/tools/testing/selftests/net/test_bridge_backup_port.sh b/tools/testing/selftests/net/test_bridge_backup_port.sh
index 112cfd8a10..1b3f89e2b8 100755
--- a/tools/testing/selftests/net/test_bridge_backup_port.sh
+++ b/tools/testing/selftests/net/test_bridge_backup_port.sh
@@ -35,9 +35,8 @@
# | sw1 | | sw2 |
# +------------------------------------+ +------------------------------------+
+source lib.sh
ret=0
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
# All tests in this script. Can be overridden with -t option.
TESTS="
@@ -125,6 +124,16 @@ tc_check_packets()
[[ $pkts == $count ]]
}
+bridge_link_check()
+{
+ local ns=$1; shift
+ local dev=$1; shift
+ local state=$1; shift
+
+ bridge -n $ns -d -j link show dev $dev | \
+ jq -e ".[][\"state\"] == \"$state\"" &> /dev/null
+}
+
################################################################################
# Setup
@@ -132,9 +141,6 @@ setup_topo_ns()
{
local ns=$1; shift
- ip netns add $ns
- ip -n $ns link set dev lo up
-
ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1
ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0
@@ -145,13 +151,14 @@ setup_topo()
{
local ns
- for ns in sw1 sw2; do
+ setup_ns sw1 sw2
+ for ns in $sw1 $sw2; do
setup_topo_ns $ns
done
ip link add name veth0 type veth peer name veth1
- ip link set dev veth0 netns sw1 name veth0
- ip link set dev veth1 netns sw2 name veth0
+ ip link set dev veth0 netns $sw1 name veth0
+ ip link set dev veth1 netns $sw2 name veth0
}
setup_sw_common()
@@ -190,7 +197,7 @@ setup_sw_common()
setup_sw1()
{
- local ns=sw1
+ local ns=$sw1
local local_addr=192.0.2.33
local remote_addr=192.0.2.34
local veth_addr=192.0.2.49
@@ -203,7 +210,7 @@ setup_sw1()
setup_sw2()
{
- local ns=sw2
+ local ns=$sw2
local local_addr=192.0.2.34
local remote_addr=192.0.2.33
local veth_addr=192.0.2.50
@@ -229,11 +236,7 @@ setup()
cleanup()
{
- local ns
-
- for ns in h1 h2 sw1 sw2; do
- ip netns del $ns &> /dev/null
- done
+ cleanup_ns $sw1 $sw2
}
################################################################################
@@ -248,85 +251,90 @@ backup_port()
echo "Backup port"
echo "-----------"
- run_cmd "tc -n sw1 qdisc replace dev swp1 clsact"
- run_cmd "tc -n sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev swp1 clsact"
+ run_cmd "tc -n $sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10"
+ run_cmd "bridge -n $sw1 fdb replace $dmac dev swp1 master static vlan 10"
# Initial state - check that packets are forwarded out of swp1 when it
# has a carrier and not forwarded out of any port when it does not have
# a carrier.
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 1
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 1
log_test $? 0 "Forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 0
+ tc_check_packets $sw1 "dev vx0 egress" 101 0
log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier off"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 disabled
log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 1
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 1
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 0
+ tc_check_packets $sw1 "dev vx0 egress" 101 0
log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier on"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier on"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 forwarding
log_test $? 0 "swp1 carrier on"
# Configure vx0 as the backup port of swp1 and check that packets are
# forwarded out of swp1 when it has a carrier and out of vx0 when swp1
# does not have a carrier.
- run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_port vx0\""
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_port vx0\""
log_test $? 0 "vx0 configured as backup port of swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 2
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 2
log_test $? 0 "Forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 0
+ tc_check_packets $sw1 "dev vx0 egress" 101 0
log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier off"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 disabled
log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 2
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 2
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "Forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier on"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier on"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 forwarding
log_test $? 0 "swp1 carrier on"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 3
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 3
log_test $? 0 "Forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "No forwarding out of vx0"
# Remove vx0 as the backup port of swp1 and check that packets are no
# longer forwarded out of vx0 when swp1 does not have a carrier.
- run_cmd "bridge -n sw1 link set dev swp1 nobackup_port"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_port vx0\""
+ run_cmd "bridge -n $sw1 link set dev swp1 nobackup_port"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_port vx0\""
log_test $? 1 "vx0 not configured as backup port of swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 4
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 4
log_test $? 0 "Forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier off"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 disabled
log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 4
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 4
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "No forwarding out of vx0"
}
@@ -339,125 +347,130 @@ backup_nhid()
echo "Backup nexthop ID"
echo "-----------------"
- run_cmd "tc -n sw1 qdisc replace dev swp1 clsact"
- run_cmd "tc -n sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev swp1 clsact"
+ run_cmd "tc -n $sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb"
- run_cmd "ip -n sw1 nexthop replace id 2 via 192.0.2.34 fdb"
- run_cmd "ip -n sw1 nexthop replace id 10 group 1/2 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 1 via 192.0.2.34 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 2 via 192.0.2.34 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 10 group 1/2 fdb"
- run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10"
- run_cmd "bridge -n sw1 fdb replace $dmac dev vx0 self static dst 192.0.2.36 src_vni 10010"
+ run_cmd "bridge -n $sw1 fdb replace $dmac dev swp1 master static vlan 10"
+ run_cmd "bridge -n $sw1 fdb replace $dmac dev vx0 self static dst 192.0.2.36 src_vni 10010"
- run_cmd "ip -n sw2 address replace 192.0.2.36/32 dev lo"
+ run_cmd "ip -n $sw2 address replace 192.0.2.36/32 dev lo"
# The first filter matches on packets forwarded using the backup
# nexthop ID and the second filter matches on packets forwarded using a
# regular VXLAN FDB entry.
- run_cmd "tc -n sw2 qdisc replace dev vx0 clsact"
- run_cmd "tc -n sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass"
- run_cmd "tc -n sw2 filter replace dev vx0 ingress pref 1 handle 102 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.36 action pass"
+ run_cmd "tc -n $sw2 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass"
+ run_cmd "tc -n $sw2 filter replace dev vx0 ingress pref 1 handle 102 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.36 action pass"
# Configure vx0 as the backup port of swp1 and check that packets are
# forwarded out of swp1 when it has a carrier and out of vx0 when swp1
# does not have a carrier. When packets are forwarded out of vx0, check
# that they are forwarded by the VXLAN FDB entry.
- run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_port vx0\""
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_port vx0\""
log_test $? 0 "vx0 configured as backup port of swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 1
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 1
log_test $? 0 "Forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 0
+ tc_check_packets $sw1 "dev vx0 egress" 101 0
log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier off"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 disabled
log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 1
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 1
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "Forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 0
+ tc_check_packets $sw2 "dev vx0 ingress" 101 0
log_test $? 0 "No forwarding using backup nexthop ID"
- tc_check_packets sw2 "dev vx0 ingress" 102 1
+ tc_check_packets $sw2 "dev vx0 ingress" 102 1
log_test $? 0 "Forwarding using VXLAN FDB entry"
- run_cmd "ip -n sw1 link set dev swp1 carrier on"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier on"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 forwarding
log_test $? 0 "swp1 carrier on"
# Configure nexthop ID 10 as the backup nexthop ID of swp1 and check
# that when packets are forwarded out of vx0, they are forwarded using
# the backup nexthop ID.
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 10\""
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 10"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_nhid 10\""
log_test $? 0 "nexthop ID 10 configured as backup nexthop ID of swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 2
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 2
log_test $? 0 "Forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier off"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 disabled
log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 2
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 2
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "Forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 1
+ tc_check_packets $sw2 "dev vx0 ingress" 101 1
log_test $? 0 "Forwarding using backup nexthop ID"
- tc_check_packets sw2 "dev vx0 ingress" 102 1
+ tc_check_packets $sw2 "dev vx0 ingress" 102 1
log_test $? 0 "No forwarding using VXLAN FDB entry"
- run_cmd "ip -n sw1 link set dev swp1 carrier on"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier on"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 forwarding
log_test $? 0 "swp1 carrier on"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 3
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 3
log_test $? 0 "Forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "No forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 1
+ tc_check_packets $sw2 "dev vx0 ingress" 101 1
log_test $? 0 "No forwarding using backup nexthop ID"
- tc_check_packets sw2 "dev vx0 ingress" 102 1
+ tc_check_packets $sw2 "dev vx0 ingress" 102 1
log_test $? 0 "No forwarding using VXLAN FDB entry"
# Reset the backup nexthop ID to 0 and check that packets are no longer
# forwarded using the backup nexthop ID when swp1 does not have a
# carrier and are instead forwarded by the VXLAN FDB.
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 0"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid\""
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 0"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_nhid\""
log_test $? 1 "No backup nexthop ID configured for swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 4
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 4
log_test $? 0 "Forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "No forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 1
+ tc_check_packets $sw2 "dev vx0 ingress" 101 1
log_test $? 0 "No forwarding using backup nexthop ID"
- tc_check_packets sw2 "dev vx0 ingress" 102 1
+ tc_check_packets $sw2 "dev vx0 ingress" 102 1
log_test $? 0 "No forwarding using VXLAN FDB entry"
- run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier off"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 disabled
log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 4
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 4
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 3
+ tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "Forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 1
+ tc_check_packets $sw2 "dev vx0 ingress" 101 1
log_test $? 0 "No forwarding using backup nexthop ID"
- tc_check_packets sw2 "dev vx0 ingress" 102 2
+ tc_check_packets $sw2 "dev vx0 ingress" 102 2
log_test $? 0 "Forwarding using VXLAN FDB entry"
}
@@ -475,109 +488,110 @@ backup_nhid_invalid()
# is forwarded out of the VXLAN port, but dropped by the VXLAN driver
# and does not crash the host.
- run_cmd "tc -n sw1 qdisc replace dev swp1 clsact"
- run_cmd "tc -n sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev swp1 clsact"
+ run_cmd "tc -n $sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
# Drop all other Tx traffic to avoid changes to Tx drop counter.
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 2 handle 102 proto all matchall action drop"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 2 handle 102 proto all matchall action drop"
- tx_drop=$(ip -n sw1 -s -j link show dev vx0 | jq '.[]["stats64"]["tx"]["dropped"]')
+ tx_drop=$(ip -n $sw1 -s -j link show dev vx0 | jq '.[]["stats64"]["tx"]["dropped"]')
- run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb"
- run_cmd "ip -n sw1 nexthop replace id 2 via 192.0.2.34 fdb"
- run_cmd "ip -n sw1 nexthop replace id 10 group 1/2 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 1 via 192.0.2.34 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 2 via 192.0.2.34 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 10 group 1/2 fdb"
- run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10"
+ run_cmd "bridge -n $sw1 fdb replace $dmac dev swp1 master static vlan 10"
- run_cmd "tc -n sw2 qdisc replace dev vx0 clsact"
- run_cmd "tc -n sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass"
+ run_cmd "tc -n $sw2 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass"
# First, check that redirection works.
- run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_port vx0\""
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_port vx0\""
log_test $? 0 "vx0 configured as backup port of swp1"
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 10\""
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 10"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_nhid 10\""
log_test $? 0 "Valid nexthop as backup nexthop"
- run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier off"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 disabled
log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 0
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 0
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "Forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 1
+ tc_check_packets $sw2 "dev vx0 ingress" 101 1
log_test $? 0 "Forwarding using backup nexthop ID"
- run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $tx_drop'"
+ run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $tx_drop'"
log_test $? 0 "No Tx drop increase"
# Use a non-existent nexthop ID.
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 20"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 20\""
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 20"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_nhid 20\""
log_test $? 0 "Non-existent nexthop as backup nexthop"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 0
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 0
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "Forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 1
+ tc_check_packets $sw2 "dev vx0 ingress" 101 1
log_test $? 0 "No forwarding using backup nexthop ID"
- run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 1))'"
+ run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 1))'"
log_test $? 0 "Tx drop increased"
# Use a blckhole nexthop.
- run_cmd "ip -n sw1 nexthop replace id 30 blackhole"
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 30"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 30\""
+ run_cmd "ip -n $sw1 nexthop replace id 30 blackhole"
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 30"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_nhid 30\""
log_test $? 0 "Blackhole nexthop as backup nexthop"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 0
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 0
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 3
+ tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "Forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 1
+ tc_check_packets $sw2 "dev vx0 ingress" 101 1
log_test $? 0 "No forwarding using backup nexthop ID"
- run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 2))'"
+ run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 2))'"
log_test $? 0 "Tx drop increased"
# Non-group FDB nexthop.
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 1"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 1\""
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 1"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_nhid 1\""
log_test $? 0 "Non-group FDB nexthop as backup nexthop"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 0
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 0
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 4
+ tc_check_packets $sw1 "dev vx0 egress" 101 4
log_test $? 0 "Forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 1
+ tc_check_packets $sw2 "dev vx0 ingress" 101 1
log_test $? 0 "No forwarding using backup nexthop ID"
- run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 3))'"
+ run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 3))'"
log_test $? 0 "Tx drop increased"
# IPv6 address family nexthop.
- run_cmd "ip -n sw1 nexthop replace id 100 via 2001:db8:100::1 fdb"
- run_cmd "ip -n sw1 nexthop replace id 200 via 2001:db8:100::1 fdb"
- run_cmd "ip -n sw1 nexthop replace id 300 group 100/200 fdb"
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 300"
- run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 300\""
+ run_cmd "ip -n $sw1 nexthop replace id 100 via 2001:db8:100::1 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 200 via 2001:db8:100::1 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 300 group 100/200 fdb"
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 300"
+ run_cmd "bridge -n $sw1 -d link show dev swp1 | grep \"backup_nhid 300\""
log_test $? 0 "IPv6 address family nexthop as backup nexthop"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
- tc_check_packets sw1 "dev swp1 egress" 101 0
+ run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets $sw1 "dev swp1 egress" 101 0
log_test $? 0 "No forwarding out of swp1"
- tc_check_packets sw1 "dev vx0 egress" 101 5
+ tc_check_packets $sw1 "dev vx0 egress" 101 5
log_test $? 0 "Forwarding out of vx0"
- tc_check_packets sw2 "dev vx0 ingress" 101 1
+ tc_check_packets $sw2 "dev vx0 ingress" 101 1
log_test $? 0 "No forwarding using backup nexthop ID"
- run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 4))'"
+ run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 4))'"
log_test $? 0 "Tx drop increased"
}
@@ -591,44 +605,46 @@ backup_nhid_ping()
echo "------------------------"
# Test bidirectional traffic when traffic is redirected in both VTEPs.
- sw1_mac=$(ip -n sw1 -j -p link show br0.10 | jq -r '.[]["address"]')
- sw2_mac=$(ip -n sw2 -j -p link show br0.10 | jq -r '.[]["address"]')
+ sw1_mac=$(ip -n $sw1 -j -p link show br0.10 | jq -r '.[]["address"]')
+ sw2_mac=$(ip -n $sw2 -j -p link show br0.10 | jq -r '.[]["address"]')
- run_cmd "bridge -n sw1 fdb replace $sw2_mac dev swp1 master static vlan 10"
- run_cmd "bridge -n sw2 fdb replace $sw1_mac dev swp1 master static vlan 10"
+ run_cmd "bridge -n $sw1 fdb replace $sw2_mac dev swp1 master static vlan 10"
+ run_cmd "bridge -n $sw2 fdb replace $sw1_mac dev swp1 master static vlan 10"
- run_cmd "ip -n sw1 neigh replace 192.0.2.66 lladdr $sw2_mac nud perm dev br0.10"
- run_cmd "ip -n sw2 neigh replace 192.0.2.65 lladdr $sw1_mac nud perm dev br0.10"
+ run_cmd "ip -n $sw1 neigh replace 192.0.2.66 lladdr $sw2_mac nud perm dev br0.10"
+ run_cmd "ip -n $sw2 neigh replace 192.0.2.65 lladdr $sw1_mac nud perm dev br0.10"
- run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb"
- run_cmd "ip -n sw2 nexthop replace id 1 via 192.0.2.33 fdb"
- run_cmd "ip -n sw1 nexthop replace id 10 group 1 fdb"
- run_cmd "ip -n sw2 nexthop replace id 10 group 1 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 1 via 192.0.2.34 fdb"
+ run_cmd "ip -n $sw2 nexthop replace id 1 via 192.0.2.33 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 10 group 1 fdb"
+ run_cmd "ip -n $sw2 nexthop replace id 10 group 1 fdb"
- run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
- run_cmd "bridge -n sw2 link set dev swp1 backup_port vx0"
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10"
- run_cmd "bridge -n sw2 link set dev swp1 backup_nhid 10"
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n $sw2 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 10"
+ run_cmd "bridge -n $sw2 link set dev swp1 backup_nhid 10"
- run_cmd "ip -n sw1 link set dev swp1 carrier off"
- run_cmd "ip -n sw2 link set dev swp1 carrier off"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier off"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw1 swp1 disabled
+ run_cmd "ip -n $sw2 link set dev swp1 carrier off"
+ busywait $BUSYWAIT_TIMEOUT bridge_link_check $sw2 swp1 disabled
- run_cmd "ip netns exec sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66"
+ run_cmd "ip netns exec $sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66"
log_test $? 0 "Ping with backup nexthop ID"
# Reset the backup nexthop ID to 0 and check that ping fails.
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 0"
- run_cmd "bridge -n sw2 link set dev swp1 backup_nhid 0"
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 0"
+ run_cmd "bridge -n $sw2 link set dev swp1 backup_nhid 0"
- run_cmd "ip netns exec sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66"
+ run_cmd "ip netns exec $sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66"
log_test $? 1 "Ping after disabling backup nexthop ID"
}
backup_nhid_add_del_loop()
{
while true; do
- ip -n sw1 nexthop del id 10
- ip -n sw1 nexthop replace id 10 group 1/2 fdb
+ ip -n $sw1 nexthop del id 10
+ ip -n $sw1 nexthop replace id 10 group 1/2 fdb
done >/dev/null 2>&1
}
@@ -648,19 +664,19 @@ backup_nhid_torture()
# deleting the group. The test is considered successful if nothing
# crashed.
- run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb"
- run_cmd "ip -n sw1 nexthop replace id 2 via 192.0.2.34 fdb"
- run_cmd "ip -n sw1 nexthop replace id 10 group 1/2 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 1 via 192.0.2.34 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 2 via 192.0.2.34 fdb"
+ run_cmd "ip -n $sw1 nexthop replace id 10 group 1/2 fdb"
- run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10"
+ run_cmd "bridge -n $sw1 fdb replace $dmac dev swp1 master static vlan 10"
- run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10"
- run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 10"
+ run_cmd "ip -n $sw1 link set dev swp1 carrier off"
backup_nhid_add_del_loop &
pid1=$!
- ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 0 &
+ ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 0 &
pid2=$!
sleep 30
diff --git a/tools/testing/selftests/net/test_vxlan_mdb.sh b/tools/testing/selftests/net/test_vxlan_mdb.sh
index 31e5f0f885..6e996f8063 100755
--- a/tools/testing/selftests/net/test_vxlan_mdb.sh
+++ b/tools/testing/selftests/net/test_vxlan_mdb.sh
@@ -337,62 +337,62 @@ basic_common()
# Basic add, replace and delete behavior.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
log_test $? 0 "MDB entry addition"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010"
log_test $? 0 "MDB entry presence after addition"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
log_test $? 0 "MDB entry replacement"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010"
log_test $? 0 "MDB entry presence after replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
log_test $? 0 "MDB entry deletion"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\""
- log_test $? 1 "MDB entry presence after deletion"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010"
+ log_test $? 254 "MDB entry presence after deletion"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
log_test $? 255 "Non-existent MDB entry deletion"
# Default protocol and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"proto static\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"proto static\""
log_test $? 0 "MDB entry default protocol"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent proto 123 dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"proto 123\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"proto 123\""
log_test $? 0 "MDB entry protocol replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
# Default destination port and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \" dst_port \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \" dst_port \""
log_test $? 1 "MDB entry default destination port"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip dst_port 1234 src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"dst_port 1234\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"dst_port 1234\""
log_test $? 0 "MDB entry destination port replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
# Default destination VNI and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \" vni \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \" vni \""
log_test $? 1 "MDB entry default destination VNI"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip vni 1234 src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"vni 1234\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"vni 1234\""
log_test $? 0 "MDB entry destination VNI replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
# Default outgoing interface and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \" via \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \" via \""
log_test $? 1 "MDB entry default outgoing interface"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010 via veth0"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"via veth0\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"via veth0\""
log_test $? 0 "MDB entry outgoing interface replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
@@ -550,127 +550,127 @@ star_g_common()
# Basic add, replace and delete behavior.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
log_test $? 0 "(*, G) MDB entry addition with source list"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010"
log_test $? 0 "(*, G) MDB entry presence after addition"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
log_test $? 0 "(S, G) MDB entry presence after addition"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
log_test $? 0 "(*, G) MDB entry replacement with source list"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010"
log_test $? 0 "(*, G) MDB entry presence after replacement"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
log_test $? 0 "(S, G) MDB entry presence after replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
log_test $? 0 "(*, G) MDB entry deletion"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \""
- log_test $? 1 "(*, G) MDB entry presence after deletion"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
- log_test $? 1 "(S, G) MDB entry presence after deletion"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010"
+ log_test $? 254 "(*, G) MDB entry presence after deletion"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
+ log_test $? 254 "(S, G) MDB entry presence after deletion"
# Default filter mode and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep exclude"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep exclude"
log_test $? 0 "(*, G) MDB entry default filter mode"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode include source_list $src1 dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep include"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep include"
log_test $? 0 "(*, G) MDB entry after replacing filter mode to \"include\""
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
log_test $? 0 "(S, G) MDB entry after replacing filter mode to \"include\""
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\" | grep blocked"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep blocked"
log_test $? 1 "\"blocked\" flag after replacing filter mode to \"include\""
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep exclude"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep exclude"
log_test $? 0 "(*, G) MDB entry after replacing filter mode to \"exclude\""
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grep grp $grp src $src1 src_vni 10010"
log_test $? 0 "(S, G) MDB entry after replacing filter mode to \"exclude\""
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\" | grep blocked"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep blocked"
log_test $? 0 "\"blocked\" flag after replacing filter mode to \"exclude\""
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
# Default source list and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep source_list"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep source_list"
log_test $? 1 "(*, G) MDB entry default source list"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1,$src2,$src3 dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
log_test $? 0 "(S, G) MDB entry of 1st source after replacing source list"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src2\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src2 src_vni 10010"
log_test $? 0 "(S, G) MDB entry of 2nd source after replacing source list"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src3\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src3 src_vni 10010"
log_test $? 0 "(S, G) MDB entry of 3rd source after replacing source list"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1,$src3 dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
log_test $? 0 "(S, G) MDB entry of 1st source after removing source"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src2\""
- log_test $? 1 "(S, G) MDB entry of 2nd source after removing source"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src3\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src2 src_vni 10010"
+ log_test $? 254 "(S, G) MDB entry of 2nd source after removing source"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src3 src_vni 10010"
log_test $? 0 "(S, G) MDB entry of 3rd source after removing source"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
# Default protocol and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \"proto static\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \"proto static\""
log_test $? 0 "(*, G) MDB entry default protocol"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \"proto static\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \"proto static\""
log_test $? 0 "(S, G) MDB entry default protocol"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 proto bgp dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \"proto bgp\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \"proto bgp\""
log_test $? 0 "(*, G) MDB entry protocol after replacement"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \"proto bgp\""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \"proto bgp\""
log_test $? 0 "(S, G) MDB entry protocol after replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
# Default destination port and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" dst_port \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" dst_port \""
log_test $? 1 "(*, G) MDB entry default destination port"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" dst_port \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" dst_port \""
log_test $? 1 "(S, G) MDB entry default destination port"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip dst_port 1234 src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" dst_port 1234 \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" dst_port 1234 \""
log_test $? 0 "(*, G) MDB entry destination port after replacement"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" dst_port 1234 \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" dst_port 1234 \""
log_test $? 0 "(S, G) MDB entry destination port after replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
# Default destination VNI and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" vni \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" vni \""
log_test $? 1 "(*, G) MDB entry default destination VNI"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" vni \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" vni \""
log_test $? 1 "(S, G) MDB entry default destination VNI"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip vni 1234 src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" vni 1234 \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" vni 1234 \""
log_test $? 0 "(*, G) MDB entry destination VNI after replacement"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" vni 1234 \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" vni 1234 \""
log_test $? 0 "(S, G) MDB entry destination VNI after replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
# Default outgoing interface and replacement.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" via \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" via \""
log_test $? 1 "(*, G) MDB entry default outgoing interface"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" via \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" via \""
log_test $? 1 "(S, G) MDB entry default outgoing interface"
run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010 via veth0"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" via veth0 \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" via veth0 \""
log_test $? 0 "(*, G) MDB entry outgoing interface after replacement"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" via veth0 \""
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" via veth0 \""
log_test $? 0 "(S, G) MDB entry outgoing interface after replacement"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
@@ -772,7 +772,7 @@ sg_common()
# Default filter mode.
run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp src $src permanent dst $vtep_ip src_vni 10010"
- run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep include"
+ run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src src_vni 10010 | grep include"
log_test $? 0 "(S, G) MDB entry default filter mode"
run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp src $src permanent dst $vtep_ip src_vni 10010"
@@ -2296,9 +2296,9 @@ if [ ! -x "$(command -v jq)" ]; then
exit $ksft_skip
fi
-bridge mdb help 2>&1 | grep -q "src_vni"
+bridge mdb help 2>&1 | grep -q "get"
if [ $? -ne 0 ]; then
- echo "SKIP: iproute2 bridge too old, missing VXLAN MDB support"
+ echo "SKIP: iproute2 bridge too old, missing VXLAN MDB get support"
exit $ksft_skip
fi
diff --git a/tools/testing/selftests/net/udpgro.sh b/tools/testing/selftests/net/udpgro.sh
index 0c74375266..3f09ac78f4 100755
--- a/tools/testing/selftests/net/udpgro.sh
+++ b/tools/testing/selftests/net/udpgro.sh
@@ -5,7 +5,7 @@
readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
-BPF_FILE="../bpf/xdp_dummy.bpf.o"
+BPF_FILE="xdp_dummy.o"
# set global exit status, but never reset nonzero one.
check_err()
@@ -198,7 +198,7 @@ run_all() {
}
if [ ! -f ${BPF_FILE} ]; then
- echo "Missing ${BPF_FILE}. Build bpf selftest first"
+ echo "Missing ${BPF_FILE}. Run 'make' first"
exit -1
fi
diff --git a/tools/testing/selftests/net/udpgro_bench.sh b/tools/testing/selftests/net/udpgro_bench.sh
index 894972877e..65ff1d4240 100755
--- a/tools/testing/selftests/net/udpgro_bench.sh
+++ b/tools/testing/selftests/net/udpgro_bench.sh
@@ -5,7 +5,7 @@
readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
-BPF_FILE="../bpf/xdp_dummy.bpf.o"
+BPF_FILE="xdp_dummy.o"
cleanup() {
local -r jobs="$(jobs -p)"
@@ -83,7 +83,7 @@ run_all() {
}
if [ ! -f ${BPF_FILE} ]; then
- echo "Missing ${BPF_FILE}. Build bpf selftest first"
+ echo "Missing ${BPF_FILE}. Run 'make' first"
exit -1
fi
diff --git a/tools/testing/selftests/net/udpgro_frglist.sh b/tools/testing/selftests/net/udpgro_frglist.sh
index 0a6359bed0..bd51d386b5 100755
--- a/tools/testing/selftests/net/udpgro_frglist.sh
+++ b/tools/testing/selftests/net/udpgro_frglist.sh
@@ -5,7 +5,7 @@
readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
-BPF_FILE="../bpf/xdp_dummy.bpf.o"
+BPF_FILE="xdp_dummy.o"
cleanup() {
local -r jobs="$(jobs -p)"
@@ -84,12 +84,12 @@ run_all() {
}
if [ ! -f ${BPF_FILE} ]; then
- echo "Missing ${BPF_FILE}. Build bpf selftest first"
+ echo "Missing ${BPF_FILE}. Run 'make' first"
exit -1
fi
if [ ! -f nat6to4.o ]; then
- echo "Missing nat6to4 helper. Build bpf nat6to4.o selftest first"
+ echo "Missing nat6to4 helper. Run 'make' first"
exit -1
fi
diff --git a/tools/testing/selftests/net/udpgro_fwd.sh b/tools/testing/selftests/net/udpgro_fwd.sh
index c079565add..9cd5e885e9 100755
--- a/tools/testing/selftests/net/udpgro_fwd.sh
+++ b/tools/testing/selftests/net/udpgro_fwd.sh
@@ -1,7 +1,9 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
-BPF_FILE="../bpf/xdp_dummy.bpf.o"
+source net_helper.sh
+
+BPF_FILE="xdp_dummy.o"
readonly BASE="ns-$(mktemp -u XXXXXX)"
readonly SRC=2
readonly DST=1
@@ -37,6 +39,10 @@ create_ns() {
for ns in $NS_SRC $NS_DST; do
ip netns add $ns
ip -n $ns link set dev lo up
+
+ # disable route solicitations to decrease 'noise' traffic
+ ip netns exec $ns sysctl -qw net.ipv6.conf.default.router_solicitations=0
+ ip netns exec $ns sysctl -qw net.ipv6.conf.all.router_solicitations=0
done
ip link add name veth$SRC type veth peer name veth$DST
@@ -78,6 +84,12 @@ create_vxlan_pair() {
create_vxlan_endpoint $BASE$ns veth$ns $BM_NET_V6$((3 - $ns)) vxlan6$ns 6
ip -n $BASE$ns addr add dev vxlan6$ns $OL_NET_V6$ns/24 nodad
done
+
+ # preload neighbur cache, do avoid some noisy traffic
+ local addr_dst=$(ip -j -n $BASE$DST link show dev vxlan6$DST |jq -r '.[]["address"]')
+ local addr_src=$(ip -j -n $BASE$SRC link show dev vxlan6$SRC |jq -r '.[]["address"]')
+ ip -n $BASE$DST neigh add dev vxlan6$DST lladdr $addr_src $OL_NET_V6$SRC
+ ip -n $BASE$SRC neigh add dev vxlan6$SRC lladdr $addr_dst $OL_NET_V6$DST
}
is_ipv6() {
@@ -117,9 +129,9 @@ run_test() {
# not enable GRO
ip netns exec $NS_DST $ipt -A INPUT -p udp --dport 4789
ip netns exec $NS_DST $ipt -A INPUT -p udp --dport 8000
- ip netns exec $NS_DST ./udpgso_bench_rx -C 1000 -R 10 -n 10 -l 1300 $rx_args &
+ ip netns exec $NS_DST ./udpgso_bench_rx -C 2000 -R 100 -n 10 -l 1300 $rx_args &
local spid=$!
- sleep 0.1
+ wait_local_port_listen "$NS_DST" 8000 udp
ip netns exec $NS_SRC ./udpgso_bench_tx $family -M 1 -s 13000 -S 1300 -D $dst
local retc=$?
wait $spid
@@ -166,9 +178,9 @@ run_bench() {
# bind the sender and the receiver to different CPUs to try
# get reproducible results
ip netns exec $NS_DST bash -c "echo 2 > /sys/class/net/veth$DST/queues/rx-0/rps_cpus"
- ip netns exec $NS_DST taskset 0x2 ./udpgso_bench_rx -C 1000 -R 10 &
+ ip netns exec $NS_DST taskset 0x2 ./udpgso_bench_rx -C 2000 -R 100 &
local spid=$!
- sleep 0.1
+ wait_local_port_listen "$NS_DST" 8000 udp
ip netns exec $NS_SRC taskset 0x1 ./udpgso_bench_tx $family -l 3 -S 1300 -D $dst
local retc=$?
wait $spid
diff --git a/tools/testing/selftests/net/udpgso_bench_rx.c b/tools/testing/selftests/net/udpgso_bench_rx.c
index f35a924d4a..1cbadd267c 100644
--- a/tools/testing/selftests/net/udpgso_bench_rx.c
+++ b/tools/testing/selftests/net/udpgso_bench_rx.c
@@ -375,7 +375,7 @@ static void do_recv(void)
do_flush_udp(fd);
tnow = gettimeofday_ms();
- if (tnow > treport) {
+ if (!cfg_expected_pkt_nr && tnow > treport) {
if (packets)
fprintf(stderr,
"%s rx: %6lu MB/s %8lu calls/s\n",
diff --git a/tools/testing/selftests/net/unicast_extensions.sh b/tools/testing/selftests/net/unicast_extensions.sh
index 2d10ccac89..f52aa5f7da 100755
--- a/tools/testing/selftests/net/unicast_extensions.sh
+++ b/tools/testing/selftests/net/unicast_extensions.sh
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# By Seth Schoen (c) 2021, for the IPv4 Unicast Extensions Project
@@ -28,8 +28,7 @@
# These tests provide an easy way to flip the expected result of any
# of these behaviors for testing kernel patches that change them.
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
+source lib.sh
# nettest can be run from PATH or from same directory as this selftest
if ! which nettest >/dev/null; then
@@ -61,20 +60,20 @@ _do_segmenttest(){
# foo --- bar
# Arguments: ip_a ip_b prefix_length test_description
#
- # Caller must set up foo-ns and bar-ns namespaces
+ # Caller must set up $foo_ns and $bar_ns namespaces
# containing linked veth devices foo and bar,
# respectively.
- ip -n foo-ns address add $1/$3 dev foo || return 1
- ip -n foo-ns link set foo up || return 1
- ip -n bar-ns address add $2/$3 dev bar || return 1
- ip -n bar-ns link set bar up || return 1
+ ip -n $foo_ns address add $1/$3 dev foo || return 1
+ ip -n $foo_ns link set foo up || return 1
+ ip -n $bar_ns address add $2/$3 dev bar || return 1
+ ip -n $bar_ns link set bar up || return 1
- ip netns exec foo-ns timeout 2 ping -c 1 $2 || return 1
- ip netns exec bar-ns timeout 2 ping -c 1 $1 || return 1
+ ip netns exec $foo_ns timeout 2 ping -c 1 $2 || return 1
+ ip netns exec $bar_ns timeout 2 ping -c 1 $1 || return 1
- nettest -B -N bar-ns -O foo-ns -r $1 || return 1
- nettest -B -N foo-ns -O bar-ns -r $2 || return 1
+ nettest -B -N $bar_ns -O $foo_ns -r $1 || return 1
+ nettest -B -N $foo_ns -O $bar_ns -r $2 || return 1
return 0
}
@@ -88,31 +87,31 @@ _do_route_test(){
# Arguments: foo_ip foo1_ip bar1_ip bar_ip prefix_len test_description
# Displays test result and returns success or failure.
- # Caller must set up foo-ns, bar-ns, and router-ns
+ # Caller must set up $foo_ns, $bar_ns, and $router_ns
# containing linked veth devices foo-foo1, bar1-bar
- # (foo in foo-ns, foo1 and bar1 in router-ns, and
- # bar in bar-ns).
-
- ip -n foo-ns address add $1/$5 dev foo || return 1
- ip -n foo-ns link set foo up || return 1
- ip -n foo-ns route add default via $2 || return 1
- ip -n bar-ns address add $4/$5 dev bar || return 1
- ip -n bar-ns link set bar up || return 1
- ip -n bar-ns route add default via $3 || return 1
- ip -n router-ns address add $2/$5 dev foo1 || return 1
- ip -n router-ns link set foo1 up || return 1
- ip -n router-ns address add $3/$5 dev bar1 || return 1
- ip -n router-ns link set bar1 up || return 1
-
- echo 1 | ip netns exec router-ns tee /proc/sys/net/ipv4/ip_forward
-
- ip netns exec foo-ns timeout 2 ping -c 1 $2 || return 1
- ip netns exec foo-ns timeout 2 ping -c 1 $4 || return 1
- ip netns exec bar-ns timeout 2 ping -c 1 $3 || return 1
- ip netns exec bar-ns timeout 2 ping -c 1 $1 || return 1
-
- nettest -B -N bar-ns -O foo-ns -r $1 || return 1
- nettest -B -N foo-ns -O bar-ns -r $4 || return 1
+ # (foo in $foo_ns, foo1 and bar1 in $router_ns, and
+ # bar in $bar_ns).
+
+ ip -n $foo_ns address add $1/$5 dev foo || return 1
+ ip -n $foo_ns link set foo up || return 1
+ ip -n $foo_ns route add default via $2 || return 1
+ ip -n $bar_ns address add $4/$5 dev bar || return 1
+ ip -n $bar_ns link set bar up || return 1
+ ip -n $bar_ns route add default via $3 || return 1
+ ip -n $router_ns address add $2/$5 dev foo1 || return 1
+ ip -n $router_ns link set foo1 up || return 1
+ ip -n $router_ns address add $3/$5 dev bar1 || return 1
+ ip -n $router_ns link set bar1 up || return 1
+
+ echo 1 | ip netns exec $router_ns tee /proc/sys/net/ipv4/ip_forward
+
+ ip netns exec $foo_ns timeout 2 ping -c 1 $2 || return 1
+ ip netns exec $foo_ns timeout 2 ping -c 1 $4 || return 1
+ ip netns exec $bar_ns timeout 2 ping -c 1 $3 || return 1
+ ip netns exec $bar_ns timeout 2 ping -c 1 $1 || return 1
+
+ nettest -B -N $bar_ns -O $foo_ns -r $1 || return 1
+ nettest -B -N $foo_ns -O $bar_ns -r $4 || return 1
return 0
}
@@ -121,17 +120,15 @@ segmenttest(){
# Sets up veth link and tries to connect over it.
# Arguments: ip_a ip_b prefix_len test_description
hide_output
- ip netns add foo-ns
- ip netns add bar-ns
- ip link add foo netns foo-ns type veth peer name bar netns bar-ns
+ setup_ns foo_ns bar_ns
+ ip link add foo netns $foo_ns type veth peer name bar netns $bar_ns
test_result=0
_do_segmenttest "$@" || test_result=1
- ip netns pids foo-ns | xargs -r kill -9
- ip netns pids bar-ns | xargs -r kill -9
- ip netns del foo-ns
- ip netns del bar-ns
+ ip netns pids $foo_ns | xargs -r kill -9
+ ip netns pids $bar_ns | xargs -r kill -9
+ cleanup_ns $foo_ns $bar_ns
show_output
# inverted tests will expect failure instead of success
@@ -147,21 +144,17 @@ route_test(){
# Returns success or failure.
hide_output
- ip netns add foo-ns
- ip netns add bar-ns
- ip netns add router-ns
- ip link add foo netns foo-ns type veth peer name foo1 netns router-ns
- ip link add bar netns bar-ns type veth peer name bar1 netns router-ns
+ setup_ns foo_ns bar_ns router_ns
+ ip link add foo netns $foo_ns type veth peer name foo1 netns $router_ns
+ ip link add bar netns $bar_ns type veth peer name bar1 netns $router_ns
test_result=0
_do_route_test "$@" || test_result=1
- ip netns pids foo-ns | xargs -r kill -9
- ip netns pids bar-ns | xargs -r kill -9
- ip netns pids router-ns | xargs -r kill -9
- ip netns del foo-ns
- ip netns del bar-ns
- ip netns del router-ns
+ ip netns pids $foo_ns | xargs -r kill -9
+ ip netns pids $bar_ns | xargs -r kill -9
+ ip netns pids $router_ns | xargs -r kill -9
+ cleanup_ns $foo_ns $bar_ns $router_ns
show_output
diff --git a/tools/testing/selftests/net/veth.sh b/tools/testing/selftests/net/veth.sh
index 2d073595c6..27574bbf2d 100755
--- a/tools/testing/selftests/net/veth.sh
+++ b/tools/testing/selftests/net/veth.sh
@@ -1,7 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
-BPF_FILE="../bpf/xdp_dummy.bpf.o"
+BPF_FILE="xdp_dummy.o"
readonly STATS="$(mktemp -p /tmp ns-XXXXXX)"
readonly BASE=`basename $STATS`
readonly SRC=2
@@ -218,7 +218,7 @@ while getopts "hs:" option; do
done
if [ ! -f ${BPF_FILE} ]; then
- echo "Missing ${BPF_FILE}. Build bpf selftest first"
+ echo "Missing ${BPF_FILE}. Run 'make' first"
exit 1
fi
diff --git a/tools/testing/selftests/net/vlan_hw_filter.sh b/tools/testing/selftests/net/vlan_hw_filter.sh
new file mode 100755
index 0000000000..7bc804ffaf
--- /dev/null
+++ b/tools/testing/selftests/net/vlan_hw_filter.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+readonly NETNS="ns-$(mktemp -u XXXXXX)"
+
+ret=0
+
+cleanup() {
+ ip netns del $NETNS
+}
+
+trap cleanup EXIT
+
+fail() {
+ echo "ERROR: ${1:-unexpected return code} (ret: $_)" >&2
+ ret=1
+}
+
+ip netns add ${NETNS}
+ip netns exec ${NETNS} ip link add bond0 type bond mode 0
+ip netns exec ${NETNS} ip link add bond_slave_1 type veth peer veth2
+ip netns exec ${NETNS} ip link set bond_slave_1 master bond0
+ip netns exec ${NETNS} ethtool -K bond0 rx-vlan-filter off
+ip netns exec ${NETNS} ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
+ip netns exec ${NETNS} ip link add link bond0 name bond0.0 type vlan id 0
+ip netns exec ${NETNS} ip link set bond_slave_1 nomaster
+ip netns exec ${NETNS} ip link del veth2 || fail "Please check vlan HW filter function"
+
+exit $ret
diff --git a/tools/testing/selftests/net/xdp_dummy.c b/tools/testing/selftests/net/xdp_dummy.c
new file mode 100644
index 0000000000..d988b2e0ce
--- /dev/null
+++ b/tools/testing/selftests/net/xdp_dummy.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define KBUILD_MODNAME "xdp_dummy"
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+
+SEC("xdp")
+int xdp_dummy_prog(struct xdp_md *ctx)
+{
+ return XDP_PASS;
+}
+
+char _license[] SEC("license") = "GPL";