diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /tools/testing/selftests/netfilter/ipip-conntrack-mtu.sh | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'tools/testing/selftests/netfilter/ipip-conntrack-mtu.sh')
-rwxr-xr-x | tools/testing/selftests/netfilter/ipip-conntrack-mtu.sh | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/tools/testing/selftests/netfilter/ipip-conntrack-mtu.sh b/tools/testing/selftests/netfilter/ipip-conntrack-mtu.sh new file mode 100755 index 0000000000..eb9553e498 --- /dev/null +++ b/tools/testing/selftests/netfilter/ipip-conntrack-mtu.sh @@ -0,0 +1,207 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +# Conntrack needs to reassemble fragments in order to have complete +# packets for rule matching. Reassembly can lead to packet loss. + +# Consider the following setup: +# +--------+ +---------+ +--------+ +# |Router A|-------|Wanrouter|-------|Router B| +# | |.IPIP..| |..IPIP.| | +# +--------+ +---------+ +--------+ +# / mtu 1400 \ +# / \ +#+--------+ +--------+ +#|Client A| |Client B| +#| | | | +#+--------+ +--------+ + +# Router A and Router B use IPIP tunnel interfaces to tunnel traffic +# between Client A and Client B over WAN. Wanrouter has MTU 1400 set +# on its interfaces. + +rnd=$(mktemp -u XXXXXXXX) +rx=$(mktemp) + +r_a="ns-ra-$rnd" +r_b="ns-rb-$rnd" +r_w="ns-rw-$rnd" +c_a="ns-ca-$rnd" +c_b="ns-cb-$rnd" + +checktool (){ + if ! $1 > /dev/null 2>&1; then + echo "SKIP: Could not $2" + exit $ksft_skip + fi +} + +checktool "iptables --version" "run test without iptables" +checktool "ip -Version" "run test without ip tool" +checktool "which socat" "run test without socat" +checktool "ip netns add ${r_a}" "create net namespace" + +for n in ${r_b} ${r_w} ${c_a} ${c_b};do + ip netns add ${n} +done + +cleanup() { + for n in ${r_a} ${r_b} ${r_w} ${c_a} ${c_b};do + ip netns del ${n} + done + rm -f ${rx} +} + +trap cleanup EXIT + +test_path() { + msg="$1" + + ip netns exec ${c_b} socat -t 3 - udp4-listen:5000,reuseaddr > ${rx} < /dev/null & + + sleep 1 + for i in 1 2 3; do + head -c1400 /dev/zero | tr "\000" "a" | \ + ip netns exec ${c_a} socat -t 1 -u STDIN UDP:192.168.20.2:5000 + done + + wait + + bytes=$(wc -c < ${rx}) + + if [ $bytes -eq 1400 ];then + echo "OK: PMTU $msg connection tracking" + else + echo "FAIL: PMTU $msg connection tracking: got $bytes, expected 1400" + exit 1 + fi +} + +# Detailed setup for Router A +# --------------------------- +# Interfaces: +# eth0: 10.2.2.1/24 +# eth1: 192.168.10.1/24 +# ipip0: No IP address, local 10.2.2.1 remote 10.4.4.1 +# Routes: +# 192.168.20.0/24 dev ipip0 (192.168.20.0/24 is subnet of Client B) +# 10.4.4.1 via 10.2.2.254 (Router B via Wanrouter) +# No iptables rules at all. + +ip link add veth0 netns ${r_a} type veth peer name veth0 netns ${r_w} +ip link add veth1 netns ${r_a} type veth peer name veth0 netns ${c_a} + +l_addr="10.2.2.1" +r_addr="10.4.4.1" +ip netns exec ${r_a} ip link add ipip0 type ipip local ${l_addr} remote ${r_addr} mode ipip || exit $ksft_skip + +for dev in lo veth0 veth1 ipip0; do + ip -net ${r_a} link set $dev up +done + +ip -net ${r_a} addr add 10.2.2.1/24 dev veth0 +ip -net ${r_a} addr add 192.168.10.1/24 dev veth1 + +ip -net ${r_a} route add 192.168.20.0/24 dev ipip0 +ip -net ${r_a} route add 10.4.4.0/24 via 10.2.2.254 + +ip netns exec ${r_a} sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null + +# Detailed setup for Router B +# --------------------------- +# Interfaces: +# eth0: 10.4.4.1/24 +# eth1: 192.168.20.1/24 +# ipip0: No IP address, local 10.4.4.1 remote 10.2.2.1 +# Routes: +# 192.168.10.0/24 dev ipip0 (192.168.10.0/24 is subnet of Client A) +# 10.2.2.1 via 10.4.4.254 (Router A via Wanrouter) +# No iptables rules at all. + +ip link add veth0 netns ${r_b} type veth peer name veth1 netns ${r_w} +ip link add veth1 netns ${r_b} type veth peer name veth0 netns ${c_b} + +l_addr="10.4.4.1" +r_addr="10.2.2.1" + +ip netns exec ${r_b} ip link add ipip0 type ipip local ${l_addr} remote ${r_addr} mode ipip || exit $ksft_skip + +for dev in lo veth0 veth1 ipip0; do + ip -net ${r_b} link set $dev up +done + +ip -net ${r_b} addr add 10.4.4.1/24 dev veth0 +ip -net ${r_b} addr add 192.168.20.1/24 dev veth1 + +ip -net ${r_b} route add 192.168.10.0/24 dev ipip0 +ip -net ${r_b} route add 10.2.2.0/24 via 10.4.4.254 +ip netns exec ${r_b} sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null + +# Client A +ip -net ${c_a} addr add 192.168.10.2/24 dev veth0 +ip -net ${c_a} link set dev lo up +ip -net ${c_a} link set dev veth0 up +ip -net ${c_a} route add default via 192.168.10.1 + +# Client A +ip -net ${c_b} addr add 192.168.20.2/24 dev veth0 +ip -net ${c_b} link set dev veth0 up +ip -net ${c_b} link set dev lo up +ip -net ${c_b} route add default via 192.168.20.1 + +# Wan +ip -net ${r_w} addr add 10.2.2.254/24 dev veth0 +ip -net ${r_w} addr add 10.4.4.254/24 dev veth1 + +ip -net ${r_w} link set dev lo up +ip -net ${r_w} link set dev veth0 up mtu 1400 +ip -net ${r_w} link set dev veth1 up mtu 1400 + +ip -net ${r_a} link set dev veth0 mtu 1400 +ip -net ${r_b} link set dev veth0 mtu 1400 + +ip netns exec ${r_w} sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null + +# Path MTU discovery +# ------------------ +# Running tracepath from Client A to Client B shows PMTU discovery is working +# as expected: +# +# clienta:~# tracepath 192.168.20.2 +# 1?: [LOCALHOST] pmtu 1500 +# 1: 192.168.10.1 0.867ms +# 1: 192.168.10.1 0.302ms +# 2: 192.168.10.1 0.312ms pmtu 1480 +# 2: no reply +# 3: 192.168.10.1 0.510ms pmtu 1380 +# 3: 192.168.20.2 2.320ms reached +# Resume: pmtu 1380 hops 3 back 3 + +# ip netns exec ${c_a} traceroute --mtu 192.168.20.2 + +# Router A has learned PMTU (1400) to Router B from Wanrouter. +# Client A has learned PMTU (1400 - IPIP overhead = 1380) to Client B +# from Router A. + +#Send large UDP packet +#--------------------- +#Now we send a 1400 bytes UDP packet from Client A to Client B: + +# clienta:~# head -c1400 /dev/zero | tr "\000" "a" | socat -u STDIN UDP:192.168.20.2:5000 +test_path "without" + +# The IPv4 stack on Client A already knows the PMTU to Client B, so the +# UDP packet is sent as two fragments (1380 + 20). Router A forwards the +# fragments between eth1 and ipip0. The fragments fit into the tunnel and +# reach their destination. + +#When sending the large UDP packet again, Router A now reassembles the +#fragments before routing the packet over ipip0. The resulting IPIP +#packet is too big (1400) for the tunnel PMTU (1380) to Router B, it is +#dropped on Router A before sending. + +ip netns exec ${r_a} iptables -A FORWARD -m conntrack --ctstate NEW +test_path "with" |