diff options
Diffstat (limited to 'Documentation/arch/arm/samsung')
| -rw-r--r-- | Documentation/arch/arm/samsung/bootloader-interface.rst | 81 | ||||
| -rwxr-xr-x | Documentation/arch/arm/samsung/clksrc-change-registers.awk | 166 | ||||
| -rw-r--r-- | Documentation/arch/arm/samsung/gpio.rst | 32 | ||||
| -rw-r--r-- | Documentation/arch/arm/samsung/index.rst | 12 | ||||
| -rw-r--r-- | Documentation/arch/arm/samsung/overview.rst | 76 |
5 files changed, 367 insertions, 0 deletions
diff --git a/Documentation/arch/arm/samsung/bootloader-interface.rst b/Documentation/arch/arm/samsung/bootloader-interface.rst new file mode 100644 index 000000000..a56f325da --- /dev/null +++ b/Documentation/arch/arm/samsung/bootloader-interface.rst @@ -0,0 +1,81 @@ +========================================================== +Interface between kernel and boot loaders on Exynos boards +========================================================== + +Author: Krzysztof Kozlowski + +Date : 6 June 2015 + +The document tries to describe currently used interface between Linux kernel +and boot loaders on Samsung Exynos based boards. This is not a definition +of interface but rather a description of existing state, a reference +for information purpose only. + +In the document "boot loader" means any of following: U-boot, proprietary +SBOOT or any other firmware for ARMv7 and ARMv8 initializing the board before +executing kernel. + + +1. Non-Secure mode + +Address: sysram_ns_base_addr + +============= ============================================ ================== +Offset Value Purpose +============= ============================================ ================== +0x08 exynos_cpu_resume_ns, mcpm_entry_point System suspend +0x0c 0x00000bad (Magic cookie) System suspend +0x1c exynos4_secondary_startup Secondary CPU boot +0x1c + 4*cpu exynos4_secondary_startup (Exynos4412) Secondary CPU boot +0x20 0xfcba0d10 (Magic cookie) AFTR +0x24 exynos_cpu_resume_ns AFTR +0x28 + 4*cpu 0x8 (Magic cookie, Exynos3250) AFTR +0x28 0x0 or last value during resume (Exynos542x) System suspend +============= ============================================ ================== + + +2. Secure mode + +Address: sysram_base_addr + +============= ============================================ ================== +Offset Value Purpose +============= ============================================ ================== +0x00 exynos4_secondary_startup Secondary CPU boot +0x04 exynos4_secondary_startup (Exynos542x) Secondary CPU boot +4*cpu exynos4_secondary_startup (Exynos4412) Secondary CPU boot +0x20 exynos_cpu_resume (Exynos4210 r1.0) AFTR +0x24 0xfcba0d10 (Magic cookie, Exynos4210 r1.0) AFTR +============= ============================================ ================== + +Address: pmu_base_addr + +============= ============================================ ================== +Offset Value Purpose +============= ============================================ ================== +0x0800 exynos_cpu_resume AFTR, suspend +0x0800 mcpm_entry_point (Exynos542x with MCPM) AFTR, suspend +0x0804 0xfcba0d10 (Magic cookie) AFTR +0x0804 0x00000bad (Magic cookie) System suspend +0x0814 exynos4_secondary_startup (Exynos4210 r1.1) Secondary CPU boot +0x0818 0xfcba0d10 (Magic cookie, Exynos4210 r1.1) AFTR +0x081C exynos_cpu_resume (Exynos4210 r1.1) AFTR +============= ============================================ ================== + +3. Other (regardless of secure/non-secure mode) + +Address: pmu_base_addr + +============= =============================== =============================== +Offset Value Purpose +============= =============================== =============================== +0x0908 Non-zero Secondary CPU boot up indicator + on Exynos3250 and Exynos542x +============= =============================== =============================== + + +4. Glossary + +AFTR - ARM Off Top Running, a low power mode, Cortex cores and many other +modules are power gated, except the TOP modules +MCPM - Multi-Cluster Power Management diff --git a/Documentation/arch/arm/samsung/clksrc-change-registers.awk b/Documentation/arch/arm/samsung/clksrc-change-registers.awk new file mode 100755 index 000000000..7be1b8aa7 --- /dev/null +++ b/Documentation/arch/arm/samsung/clksrc-change-registers.awk @@ -0,0 +1,166 @@ +#!/usr/bin/awk -f +# +# Copyright 2010 Ben Dooks <ben-linux@fluff.org> +# +# Released under GPLv2 + +# example usage +# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst + +function extract_value(s) +{ + eqat = index(s, "=") + comat = index(s, ",") + return substr(s, eqat+2, (comat-eqat)-2) +} + +function remove_brackets(b) +{ + return substr(b, 2, length(b)-2) +} + +function splitdefine(l, p) +{ + r = split(l, tp) + + p[0] = tp[2] + p[1] = remove_brackets(tp[3]) +} + +function find_length(f) +{ + if (0) + printf "find_length " f "\n" > "/dev/stderr" + + if (f ~ /0x1/) + return 1 + else if (f ~ /0x3/) + return 2 + else if (f ~ /0x7/) + return 3 + else if (f ~ /0xf/) + return 4 + + printf "unknown length " f "\n" > "/dev/stderr" + exit +} + +function find_shift(s) +{ + id = index(s, "<") + if (id <= 0) { + printf "cannot find shift " s "\n" > "/dev/stderr" + exit + } + + return substr(s, id+2) +} + + +BEGIN { + if (ARGC < 2) { + print "too few arguments" > "/dev/stderr" + exit + } + +# read the header file and find the mask values that we will need +# to replace and create an associative array of values + + while (getline line < ARGV[1] > 0) { + if (line ~ /\#define.*_MASK/ && + !(line ~ /USB_SIG_MASK/)) { + splitdefine(line, fields) + name = fields[0] + if (0) + printf "MASK " line "\n" > "/dev/stderr" + dmask[name,0] = find_length(fields[1]) + dmask[name,1] = find_shift(fields[1]) + if (0) + printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr" + } else { + } + } + + delete ARGV[1] +} + +/clksrc_clk.*=.*{/ { + shift="" + mask="" + divshift="" + reg_div="" + reg_src="" + indent=1 + + print $0 + + for(; indent >= 1;) { + if ((getline line) <= 0) { + printf "unexpected end of file" > "/dev/stderr" + exit 1; + } + + if (line ~ /\.shift/) { + shift = extract_value(line) + } else if (line ~ /\.mask/) { + mask = extract_value(line) + } else if (line ~ /\.reg_divider/) { + reg_div = extract_value(line) + } else if (line ~ /\.reg_source/) { + reg_src = extract_value(line) + } else if (line ~ /\.divider_shift/) { + divshift = extract_value(line) + } else if (line ~ /{/) { + indent++ + print line + } else if (line ~ /}/) { + indent-- + + if (indent == 0) { + if (0) { + printf "shift '" shift "' ='" dmask[shift,0] "'\n" > "/dev/stderr" + printf "mask '" mask "'\n" > "/dev/stderr" + printf "dshft '" divshift "'\n" > "/dev/stderr" + printf "rdiv '" reg_div "'\n" > "/dev/stderr" + printf "rsrc '" reg_src "'\n" > "/dev/stderr" + } + + generated = mask + sub(reg_src, reg_div, generated) + + if (0) { + printf "/* rsrc " reg_src " */\n" + printf "/* rdiv " reg_div " */\n" + printf "/* shift " shift " */\n" + printf "/* mask " mask " */\n" + printf "/* generated " generated " */\n" + } + + if (reg_div != "") { + printf "\t.reg_div = { " + printf ".reg = " reg_div ", " + printf ".shift = " dmask[generated,1] ", " + printf ".size = " dmask[generated,0] ", " + printf "},\n" + } + + printf "\t.reg_src = { " + printf ".reg = " reg_src ", " + printf ".shift = " dmask[mask,1] ", " + printf ".size = " dmask[mask,0] ", " + + printf "},\n" + + } + + print line + } else { + print line + } + + if (0) + printf indent ":" line "\n" > "/dev/stderr" + } +} + +// && ! /clksrc_clk.*=.*{/ { print $0 } diff --git a/Documentation/arch/arm/samsung/gpio.rst b/Documentation/arch/arm/samsung/gpio.rst new file mode 100644 index 000000000..27fae0d50 --- /dev/null +++ b/Documentation/arch/arm/samsung/gpio.rst @@ -0,0 +1,32 @@ +=========================== +Samsung GPIO implementation +=========================== + +Introduction +------------ + +This outlines the Samsung GPIO implementation and the architecture +specific calls provided alongside the drivers/gpio core. + + +GPIOLIB integration +------------------- + +The gpio implementation uses gpiolib as much as possible, only providing +specific calls for the items that require Samsung specific handling, such +as pin special-function or pull resistor control. + +GPIO numbering is synchronised between the Samsung and gpiolib system. + + +PIN configuration +----------------- + +Pin configuration is specific to the Samsung architecture, with each SoC +registering the necessary information for the core gpio configuration +implementation to configure pins as necessary. + +The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a +driver or machine to change gpio configuration. + +See arch/arm/mach-s3c/gpio-cfg.h for more information on these functions. diff --git a/Documentation/arch/arm/samsung/index.rst b/Documentation/arch/arm/samsung/index.rst new file mode 100644 index 000000000..8142cce3d --- /dev/null +++ b/Documentation/arch/arm/samsung/index.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========== +Samsung SoC +=========== + +.. toctree:: + :maxdepth: 1 + + gpio + bootloader-interface + overview diff --git a/Documentation/arch/arm/samsung/overview.rst b/Documentation/arch/arm/samsung/overview.rst new file mode 100644 index 000000000..8b15a1901 --- /dev/null +++ b/Documentation/arch/arm/samsung/overview.rst @@ -0,0 +1,76 @@ +========================== +Samsung ARM Linux Overview +========================== + +Introduction +------------ + + The Samsung range of ARM SoCs spans many similar devices, from the initial + ARM9 through to the newest ARM cores. This document shows an overview of + the current kernel support, how to use it and where to find the code + that supports this. + + The currently supported SoCs are: + + - S3C64XX: S3C6400 and S3C6410 + - S5PC110 / S5PV210 + + +Configuration +------------- + + A number of configurations are supplied, as there is no current way of + unifying all the SoCs into one kernel. + + s5pc110_defconfig + - S5PC110 specific default configuration + s5pv210_defconfig + - S5PV210 specific default configuration + + +Layout +------ + + The directory layout is currently being restructured, and consists of + several platform directories and then the machine specific directories + of the CPUs being built for. + + plat-samsung provides the base for all the implementations, and is the + last in the line of include directories that are processed for the build + specific information. It contains the base clock, GPIO and device definitions + to get the system running. + + plat-s5p is for s5p specific builds, and contains common support for the + S5P specific systems. Not all S5Ps use all the features in this directory + due to differences in the hardware. + + +Layout changes +-------------- + + The old plat-s3c and plat-s5pc1xx directories have been removed, with + support moved to either plat-samsung or plat-s5p as necessary. These moves + where to simplify the include and dependency issues involved with having + so many different platform directories. + + +Port Contributors +----------------- + + Ben Dooks (BJD) + Vincent Sanders + Herbert Potzl + Arnaud Patard (RTP) + Roc Wu + Klaus Fetscher + Dimitry Andric + Shannon Holland + Guillaume Gourat (NexVision) + Christer Weinigel (wingel) (Acer N30) + Lucas Correia Villa Real (S3C2400 port) + + +Document Author +--------------- + +Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org> |