1 files changed, 85 insertions, 11 deletions

diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index 8e584857dd..ab8f32c440 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -26,6 +26,12 @@ properties:
       - description: For implementations complying for Versal.
         const: xlnx,versal-firmware
 
+      - description: For implementations complying for Versal NET.
+        items:
+          - enum:
+              - xlnx,versal-net-firmware
+          - const: xlnx,versal-firmware
+
   method:
     description: |
                  The method of calling the PM-API firmware layer.
@@ -41,7 +47,53 @@ properties:
   "#power-domain-cells":
     const: 1
 
-  versal_fpga:
+  clock-controller:
+    $ref: /schemas/clock/xlnx,versal-clk.yaml#
+    description: The clock controller is a hardware block of Xilinx versal
+      clock tree. It reads required input clock frequencies from the devicetree
+      and acts as clock provider for all clock consumers of PS clocks.list of
+      clock specifiers which are external input clocks to the given clock
+      controller.
+    type: object
+
+  gpio:
+    $ref: /schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
+    description: The gpio node describes connect to PS_MODE pins via firmware
+      interface.
+    type: object
+
+  soc-nvmem:
+    $ref: /schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
+    description: The ZynqMP MPSoC provides access to the hardware related data
+      like SOC revision, IDCODE and specific purpose efuses.
+    type: object
+
+  pcap:
+    $ref: /schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml
+    description: The ZynqMP SoC uses the PCAP (Processor Configuration Port) to
+      configure the Programmable Logic (PL). The configuration uses the
+      firmware interface.
+    type: object
+
+  pinctrl:
+    $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
+    description: The pinctrl node provides access to pinconfig and pincontrol
+      functionality available in firmware.
+    type: object
+
+  power-management:
+    $ref: /schemas/power/reset/xlnx,zynqmp-power.yaml#
+    description: The zynqmp-power node describes the power management
+      configurations. It will control remote suspend/shutdown interfaces.
+    type: object
+
+  reset-controller:
+    $ref: /schemas/reset/xlnx,zynqmp-reset.yaml#
+    description: The reset-controller node describes connection to the reset
+      functionality via firmware interface.
+    type: object
+
+  versal-fpga:
     $ref: /schemas/fpga/xlnx,versal-fpga.yaml#
     description: Compatible of the FPGA device.
     type: object
@@ -53,15 +105,6 @@ properties:
       vector.
     type: object
 
-  clock-controller:
-    $ref: /schemas/clock/xlnx,versal-clk.yaml#
-    description: The clock controller is a hardware block of Xilinx versal
-      clock tree. It reads required input clock frequencies from the devicetree
-      and acts as clock provider for all clock consumers of PS clocks.list of
-      clock specifiers which are external input clocks to the given clock
-      controller.
-    type: object
-
 required:
   - compatible
 
@@ -73,7 +116,38 @@ examples:
     firmware {
       zynqmp_firmware: zynqmp-firmware {
         #power-domain-cells = <1>;
+        soc-nvmem {
+          compatible = "xlnx,zynqmp-nvmem-fw";
+          nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            soc_revision: soc-revision@0 {
+                reg = <0x0 0x4>;
+            };
+          };
+        };
+        gpio {
+          compatible = "xlnx,zynqmp-gpio-modepin";
+          gpio-controller;
+          #gpio-cells = <2>;
+        };
+        pcap {
+          compatible = "xlnx,zynqmp-pcap-fpga";
         };
+        pinctrl {
+          compatible = "xlnx,zynqmp-pinctrl";
+        };
+        power-management {
+          compatible = "xlnx,zynqmp-power";
+          interrupts = <0 35 4>;
+        };
+        reset-controller {
+          compatible = "xlnx,zynqmp-reset";
+          #reset-cells = <1>;
+        };
+      };
     };
 
     sata {
@@ -84,7 +158,7 @@ examples:
       compatible = "xlnx,versal-firmware";
       method = "smc";
 
-      versal_fpga: versal_fpga {
+      versal_fpga: versal-fpga {
         compatible = "xlnx,versal-fpga";
       };