summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt')
-rw-r--r--Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt30
1 files changed, 30 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
new file mode 100644
index 000000000..ce97265e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
@@ -0,0 +1,30 @@
+Raspberry Pi GPIO expander
+
+The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The
+firmware exposes a mailbox interface that allows the ARM core to control the
+GPIO lines on the expander.
+
+The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi
+firmware node.
+
+Required properties:
+
+- compatible : Should be "raspberrypi,firmware-gpio"
+- gpio-controller : Marks the device node as a gpio controller
+- #gpio-cells : Should be two. The first cell is the pin number, and
+ the second cell is used to specify the gpio polarity:
+ 0 = active high
+ 1 = active low
+
+Example:
+
+firmware: firmware-rpi {
+ compatible = "raspberrypi,bcm2835-firmware";
+ mboxes = <&mailbox>;
+
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};