diff options
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon')
69 files changed, 4172 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt new file mode 100644 index 000000000..d0ae46d7b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adc128d818.txt @@ -0,0 +1,38 @@ +TI ADC128D818 ADC System Monitor With Temperature Sensor +-------------------------------------------------------- + +Operation modes: + + - Mode 0: 7 single-ended voltage readings (IN0-IN6), + 1 temperature reading (internal) + - Mode 1: 8 single-ended voltage readings (IN0-IN7), + no temperature + - Mode 2: 4 pseudo-differential voltage readings + (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), + 1 temperature reading (internal) + - Mode 3: 4 single-ended voltage readings (IN0-IN3), + 2 pseudo-differential voltage readings + (IN4-IN5, IN7-IN6), + 1 temperature reading (internal) + +If no operation mode is configured via device tree, the driver keeps the +currently active chip operation mode (default is mode 0). + + +Required node properties: + + - compatible: must be set to "ti,adc128d818" + - reg: I2C address of the device + +Optional node properties: + + - ti,mode: Operation mode (u8) (see above). + + +Example (operation mode 2): + + adc128d818@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <2>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml new file mode 100644 index 000000000..ce7f8ce9d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/adi,ad741x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7416/AD7417/AD7418 temperature sensors + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - adi,ad7416 + - adi,ad7417 + - adi,ad7418 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@28 { + compatible = "adi,ad7418"; + reg = <0x28>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml new file mode 100644 index 000000000..2e45364d0 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor + https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf + +properties: + compatible: + enum: + - adi,adm1177 + + reg: + maxItems: 1 + + avcc-supply: + description: + Phandle to the Avcc power supply + + shunt-resistor-micro-ohms: + description: + The value of current sense resistor in microohms. If not provided, + the current reading and overcurrent alert is disabled. + + adi,shutdown-threshold-microamp: + description: + Specifies the current level at which an over current alert occurs. + If not provided, the overcurrent alert is configured to max ADC range + based on shunt-resistor-micro-ohms. + + adi,vrange-high-enable: + description: + Specifies which internal voltage divider to be used. A 1 selects + a 7:2 voltage divider while a 0 selects a 14:1 voltage divider. + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pwmon@5a { + compatible = "adi,adm1177"; + reg = <0x5a>; + shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */ + adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */ + adi,vrange-high-enable; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml new file mode 100644 index 000000000..4f8e11bd5 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin + Control and Fault Recording + +maintainers: + - Alexandru Tachici <alexandru.tachici@analog.com> + +description: | + Analog Devices ADM1266 Cascadable Super Sequencer with Margin + Control and Fault Recording. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf + +properties: + compatible: + enum: + - adi,adm1266 + + reg: + description: | + I2C address of slave device. + items: + minimum: 0x40 + maximum: 0x4F + + avcc-supply: + description: | + Phandle to the Avcc power supply. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adm1266@40 { + compatible = "adi,adm1266"; + reg = <0x40>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml new file mode 100644 index 000000000..ab87f51c5 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + The ADM1293 and ADM1294 are high accuracy integrated digital power monitors + that offer digital current, voltage, and power monitoring using an on-chip, + 12-bit analog-to-digital converter (ADC), communicated through a PMBus + compliant I2C interface. + + Datasheets: + https://www.analog.com/en/products/adm1294.html + +properties: + compatible: + enum: + - adi,adm1075 + - adi,adm1272 + - adi,adm1275 + - adi,adm1276 + - adi,adm1278 + - adi,adm1293 + - adi,adm1294 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: + Shunt resistor value in micro-Ohm. + + adi,volt-curr-sample-average: + description: | + Number of samples to be used to report voltage and current values. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32, 64, 128] + + adi,power-sample-average: + description: | + Number of samples to be used to report power values. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32, 64, 128] + +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,adm1075 + - adi,adm1276 + then: + properties: + adi,volt-curr-sample-average: + default: 128 + adi,power-sample-average: false + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1275 + then: + properties: + adi,volt-curr-sample-average: + default: 16 + adi,power-sample-average: false + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1272 + then: + properties: + adi,volt-curr-sample-average: + default: 128 + adi,power-sample-average: + default: 128 + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1278 + - adi,adm1293 + - adi,adm1294 + then: + properties: + adi,volt-curr-sample-average: + default: 128 + adi,power-sample-average: + default: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-sensor@10 { + compatible = "adi,adm1272"; + reg = <0x10>; + shunt-resistor-micro-ohms = <500>; + adi,volt-curr-sample-average = <128>; + adi,power-sample-average = <128>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml new file mode 100644 index 000000000..6751f9b64 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI FAN Control + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: |+ + Bindings for the Analog Devices AXI FAN Control driver. Specifications of the + core can be found in: + + https://wiki.analog.com/resources/fpga/docs/axi_fan_control + +properties: + compatible: + enum: + - adi,axi-fan-control-1.00.a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + pulses-per-revolution: + description: + Value specifying the number of pulses per revolution of the controlled + FAN. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] + +required: + - compatible + - reg + - clocks + - interrupts + - pulses-per-revolution + +additionalProperties: false + +examples: + - | + fpga_axi: fpga-axi { + #address-cells = <0x2>; + #size-cells = <0x1>; + + axi_fan_control: axi-fan-control@80000000 { + compatible = "adi,axi-fan-control-1.00.a"; + reg = <0x0 0x80000000 0x10000>; + clocks = <&clk 71>; + interrupts = <0 110 0>; + pulses-per-revolution = <2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml new file mode 100644 index 000000000..5cb66e97e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,ltc2945.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2945 wide range i2c power monitor + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +description: | + Analog Devices LTC2945 wide range i2c power monitor over I2C. + + https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2945.pdf + +properties: + compatible: + enum: + - adi,ltc2945 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: + Shunt resistor value in micro-Ohms + default: 1000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@6e { + compatible = "adi,ltc2945"; + reg = <0x6e>; + /* 10 milli-Ohm shunt resistor */ + shunt-resistor-micro-ohms = <10000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml new file mode 100644 index 000000000..152935334 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,ltc2947.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2947 high precision power and energy monitor + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices LTC2947 high precision power and energy monitor over SPI or I2C. + + https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf + +properties: + compatible: + enum: + - adi,ltc2947 + + reg: + maxItems: 1 + + clocks: + description: + The LTC2947 uses either a trimmed internal oscillator or an external clock + as the time base for determining the integration period to represent time, + charge and energy. When an external clock is used, this property must be + set accordingly. + maxItems: 1 + + adi,accumulator-ctl-pol: + description: + This property controls the polarity of current that is accumulated to + calculate charge and energy so that, they can be only accumulated for + positive current for example. Since there are two sets of registers for + the accumulated values, this entry can also have two items which sets + energy1/charge1 and energy2/charger2 respectively. Check table 12 of the + datasheet for more information on the supported options. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2, 3] + default: 0 + + adi,accumulation-deadband-microamp: + description: + This property controls the Accumulation Dead band which allows to set the + level of current below which no accumulation takes place. + maximum: 255 + default: 0 + + adi,gpio-out-pol: + description: + This property controls the GPIO polarity. Setting it to one makes the GPIO + active high, setting it to zero makets it active low. When this property + is present, the GPIO is automatically configured as output and set to + control a fan as a function of measured temperature. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + adi,gpio-in-accum: + description: + When set, this property sets the GPIO as input. It is then used to control + the accumulation of charge, energy and time. This function can be + enabled/configured separately for each of the two sets of accumulation + registers. Check table 13 of the datasheet for more information on the + supported options. This property cannot be used together with + adi,gpio-out-pol. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2] + default: 0 + +required: + - compatible + - reg + + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ltc2947_spi: ltc2947@0 { + compatible = "adi,ltc2947"; + reg = <0>; + /* accumulation takes place always for energ1/charge1. */ + /* accumulation only on positive current for energy2/charge2. */ + adi,accumulator-ctl-pol = <0 1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml new file mode 100644 index 000000000..0ad12d245 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,ltc2992.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linear Technology 2992 Power Monitor + +maintainers: + - Alexandru Tachici <alexandru.tachici@analog.com> + +description: | + Linear Technology 2992 Dual Wide Range Power Monitor + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2992.pdf + +properties: + compatible: + enum: + - adi,ltc2992 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + avcc-supply: true + +patternProperties: + "^channel@([0-1])$": + type: object + additionalProperties: false + description: | + Represents the two supplies to be monitored. + + properties: + reg: + description: | + The channel number. LTC2992 can monitor two supplies. + items: + minimum: 0 + maximum: 1 + + shunt-resistor-micro-ohms: + description: + The value of current sense resistor in microohms. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ltc2992@6f { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "adi,ltc2992"; + reg = <0x6f>; + + channel@0 { + reg = <0x0>; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml new file mode 100644 index 000000000..9f2d08d7b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31760.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31760 Fan-Speed Controller + +maintainers: + - Ibrahim Tilki <Ibrahim.Tilki@analog.com> + +description: | + Analog Devices MAX31760 Fan-Speed Controller + https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf + +properties: + compatible: + enum: + - adi,max31760 + + reg: + description: I2C address of slave device. + minimum: 0x50 + maximum: 0x57 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fan-controller@50 { + reg = <0x50>; + compatible = "adi,max31760"; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml new file mode 100644 index 000000000..2dc8b07b4 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch + +maintainers: + - Daniel Matyas <daniel.matyas@analog.com> + +description: | + Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with + I2C Interface + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf + +properties: + compatible: + oneOf: + - const: adi,max31827 + - items: + - enum: + - adi,max31828 + - adi,max31829 + - const: adi,max31827 + + reg: + maxItems: 1 + + vref-supply: + description: + Must have values in the interval (1.6V; 3.6V) in order for the device to + function correctly. + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@42 { + compatible = "adi,max31827"; + reg = <0x42>; + vref-supply = <®_vdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml new file mode 100644 index 000000000..051c976ab --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adt7475.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADT7475 hwmon sensor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + +description: | + The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple + PWN fan controllers. + + They support monitoring and controlling up to four fans (the ADT7490 can only + control up to three). They support reading a single on chip temperature + sensor and two off chip temperature sensors (the ADT7490 additionally + supports measuring up to three current external temperature sensors with + series resistance cancellation (SRC)). + + Datasheets: + https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF + + Description taken from onsemiconductors specification sheets, with minor + rephrasing. + +properties: + compatible: + enum: + - adi,adt7473 + - adi,adt7475 + - adi,adt7476 + - adi,adt7490 + + reg: + maxItems: 1 + + adi,pwm-active-state: + description: | + Integer array, represents the active state of the pwm outputs If set to 0 + the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm + uses a logic high output for 100% duty cycle. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + default: 1 + +patternProperties: + "^adi,bypass-attenuator-in[0-4]$": + description: | + Configures bypassing the individual voltage input attenuator. If + set to 1 the attenuator is bypassed if set to 0 the attenuator is + not bypassed. If the property is absent then the attenuator + retains its configuration from the bios/bootloader. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + "^adi,pin(5|10)-function$": + description: | + Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or + pin 10 on the adi,adt7476 and adi,adt7490. + $ref: /schemas/types.yaml#/definitions/string + enum: + - pwm2 + - smbalert# + + "^adi,pin(9|14)-function$": + description: | + Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or + pin 14 on the adi,adt7476 and adi,adt7490 + $ref: /schemas/types.yaml#/definitions/string + enum: + - tach4 + - therm# + - smbalert# + - gpio + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + adi,bypass-attenuator-in0 = <1>; + adi,bypass-attenuator-in1 = <0>; + adi,pwm-active-state = <1 0 1>; + adi,pin10-function = "smbalert#"; + adi,pin14-function = "tach4"; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml new file mode 100644 index 000000000..353d81d89 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/amd,sbrmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: > + Sideband Remote Management Interface (SB-RMI) compliant + AMD SoC power device. + +maintainers: + - Akshay Gupta <Akshay.Gupta@amd.com> + +description: | + SB Remote Management Interface (SB-RMI) is an SMBus compatible + interface that reports AMD SoC's Power (normalized Power) using, + Mailbox Service Request and resembles a typical 8-pin remote power + sensor's I2C interface to BMC. The power attributes in hwmon + reports power in microwatts. + +properties: + compatible: + enum: + - amd,sbrmi + + reg: + maxItems: 1 + description: | + I2C bus address of the device as specified in Section SBI SMBus Address + of the SoC register reference. The SB-RMI address is normally 78h for + socket 0 and 70h for socket 1, but it could vary based on hardware + address select pins. + \[open source SoC register reference\] + https://www.amd.com/en/support/tech-docs?keyword=55898 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sbrmi@3c { + compatible = "amd,sbrmi"; + reg = <0x3c>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml new file mode 100644 index 000000000..75088244a --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/amd,sbtsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: > + Sideband interface Temperature Sensor Interface (SB-TSI) compliant + AMD SoC temperature device + +maintainers: + - Kun Yi <kunyi@google.com> + - Supreeth Venkatesh <supreeth.venkatesh@amd.com> + +description: | + SB Temperature Sensor Interface (SB-TSI) is an SMBus compatible + interface that reports AMD SoC's Ttcl (normalized temperature), + and resembles a typical 8-pin remote temperature sensor's I2C interface + to BMC. The emulated thermal sensor can report temperatures in increments + of 0.125 degrees, ranging from 0 to 255.875. + +properties: + compatible: + enum: + - amd,sbtsi + + reg: + maxItems: 1 + description: | + I2C bus address of the device as specified in Section 6.3.1 of the + SoC register reference. The SB-TSI address is normally 98h for socket + 0 and 90h for socket 1, but it could vary based on hardware address + select pins. + \[open source SoC register reference\] + https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sbtsi@4c { + compatible = "amd,sbtsi"; + reg = <0x4c>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt new file mode 100644 index 000000000..59b38557f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt @@ -0,0 +1,14 @@ +APM X-Gene hwmon driver + +APM X-Gene SOC sensors are accessed over the "SLIMpro" mailbox. + +Required properties : + - compatible : should be "apm,xgene-slimpro-hwmon" + - mboxes : use the label reference for the mailbox as the first parameter. + The second parameter is the channel number. + +Example : + hwmonslimpro { + compatible = "apm,xgene-slimpro-hwmon"; + mboxes = <&mailbox 7>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/as370.txt b/Documentation/devicetree/bindings/hwmon/as370.txt new file mode 100644 index 000000000..d102fe765 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/as370.txt @@ -0,0 +1,11 @@ +Bindings for Synaptics AS370 PVT sensors + +Required properties: +- compatible : "syna,as370-hwmon" +- reg : address and length of the register set. + +Example: + hwmon@ea0810 { + compatible = "syna,as370-hwmon"; + reg = <0xea0810 0xc>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt new file mode 100644 index 000000000..8645cd3b8 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt @@ -0,0 +1,73 @@ +ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver + +The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho +controller can support upto 16 Fan tachometer inputs. + +There can be upto 8 fans supported. Each fan can have one PWM output and +one/two Fan tach inputs. + +Required properties for pwm-tacho node: +- #address-cells : should be 1. + +- #size-cells : should be 1. + +- #cooling-cells: should be 2. + +- reg : address and length of the register set for the device. + +- pinctrl-names : a pinctrl state named "default" must be defined. + +- pinctrl-0 : phandle referencing pin configuration of the PWM ports. + +- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and + "aspeed,ast2500-pwm-tacho" for AST2500. + +- clocks : phandle to clock provider with the clock number in the second cell + +- resets : phandle to reset controller with the reset number in the second cell + +fan subnode format: +=================== +Under fan subnode there can upto 8 child nodes, with each child node +representing a fan. If there are 8 fans each fan can have one PWM port and +one/two Fan tach inputs. +For PWM port can be configured cooling-levels to create cooling device. +Cooling device could be bound to a thermal zone for the thermal control. + +Required properties for each child node: +- reg : should specify PWM source port. + integer value in the range 0 to 7 with 0 indicating PWM port A and + 7 indicating PWM port H. + +- cooling-levels: PWM duty cycle values in a range from 0 to 255 + which correspond to thermal cooling states. + +- aspeed,fan-tach-ch : should specify the Fan tach input channel. + integer value in the range 0 through 15, with 0 indicating + Fan tach channel 0 and 15 indicating Fan tach channel 15. + At least one Fan tach input channel is required. + +Examples: + +pwm_tacho: pwmtachocontroller@1e786000 { + #address-cells = <1>; + #size-cells = <1>; + #cooling-cells = <2>; + reg = <0x1E786000 0x1000>; + compatible = "aspeed,ast2500-pwm-tacho"; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_PWM>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + cooling-levels = /bits/ 8 <125 151 177 203 229 255>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml new file mode 100644 index 000000000..5d3ce641f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/baikal,bt1-pvt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 PVT Sensor + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + Baikal-T1 SoC provides an embedded process, voltage and temperature + sensor to monitor an internal SoC environment (chip temperature, supply + voltage and process monitor) and on time detect critical situations, + which may cause the system instability and even damages. The IP-block + is based on the Analog Bits PVT sensor, but is equipped with a dedicated + control wrapper, which provides a MMIO registers-based access to the + sensor core functionality (APB3-bus based) and exposes an additional + functions like thresholds/data ready interrupts, its status and masks, + measurements timeout. Its internal structure is depicted on the next + diagram: + + Analog Bits core Bakal-T1 PVT control block + +--------------------+ +------------------------+ + | Temperature sensor |-+ +------| Sensors control | + |--------------------| |<---En---| |------------------------| + | Voltage sensor |-|<--Mode--| +--->| Sampled data | + |--------------------| |<--Trim--+ | |------------------------| + | Low-Vt sensor |-| | +--| Thresholds comparator | + |--------------------| |---Data----| | |------------------------| + | High-Vt sensor |-| | +->| Interrupts status | + |--------------------| |--Valid--+-+ | |------------------------| + | Standard-Vt sensor |-+ +---+--| Interrupts mask | + +--------------------+ |------------------------| + ^ | Interrupts timeout | + | +------------------------+ + | ^ ^ + Rclk-----+----------------------------------------+ | + APB3-------------------------------------------------+ + + This bindings describes the external Baikal-T1 PVT control interfaces + like MMIO registers space, interrupt request number and clocks source. + These are then used by the corresponding hwmon device driver to + implement the sysfs files-based access to the sensors functionality. + +properties: + compatible: + const: baikal,bt1-pvt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: PVT reference clock + - description: APB3 interface clock + + clock-names: + items: + - const: ref + - const: pclk + + "#thermal-sensor-cells": + description: Baikal-T1 can be referenced as the CPU thermal-sensor + const: 0 + + baikal,pvt-temp-offset-millicelsius: + description: | + Temperature sensor trimming factor. It can be used to manually adjust the + temperature measurements within 7.130 degrees Celsius. + default: 0 + minimum: 0 + maximum: 7130 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + + pvt@1f200000 { + compatible = "baikal,bt1-pvt"; + reg = <0x1f200000 0x1000>; + #thermal-sensor-cells = <0>; + + interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>; + + baikal,pvt-temp-offset-millicelsius = <1000>; + + clocks = <&ccu_sys>, <&ccu_sys>; + clock-names = "ref", "pclk"; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml new file mode 100644 index 000000000..cc00b97a7 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of various + application processor systems to provide a full evaluation platform. + Audio system topology, clocking and power can all be controlled through + the Lochnagar, allowing the device under test to be used in a variety of + possible use cases. + + This binding document describes the binding for the hardware monitor + portion of the driver. + + This binding must be part of the Lochnagar MFD binding: + [1] ../mfd/cirrus,lochnagar.yaml + +properties: + compatible: + enum: + - cirrus,lochnagar2-hwmon + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt new file mode 100644 index 000000000..6d154c492 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/g762.txt @@ -0,0 +1,47 @@ +GMT G762/G763 PWM Fan controller + +Required node properties: + + - "compatible": must be either "gmt,g762" or "gmt,g763" + - "reg": I2C bus address of the device + - "clocks": a fixed clock providing input clock frequency + on CLK pin of the chip. + +Optional properties: + + - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3. + The higher the more. + + - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty) + and 1 (negative duty). + + - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2. + +If an optional property is not set in .dts file, then current value is kept +unmodified (e.g. u-boot installed value). + +Additional information on operational parameters for the device is available +in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available +at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. + +Example g762 node: + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + } + } + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk> + fan_gear_mode = <0>; /* chip default */ + fan_startv = <1>; /* chip default */ + pwm_polarity = <0>; /* chip default */ + }; diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt new file mode 100644 index 000000000..f4cfa350f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt @@ -0,0 +1,41 @@ +Bindings for fan connected to GPIO lines + +Required properties: +- compatible : "gpio-fan" + +Optional properties: +- gpios: Specifies the pins that map to bits in the control value, + ordered MSB-->LSB. +- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the + control value that should be set to achieve them. This array + must have the RPM values in ascending order. +- alarm-gpios: This pin going active indicates something is wrong with + the fan, and a udev event will be fired. +- #cooling-cells: If used as a cooling device, must be <2> + Also see: + Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml + min and max states are derived from the speed-map of the fan. + +Note: At least one the "gpios" or "alarm-gpios" properties must be set. + +Examples: + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + alarm-gpios = <&gpio1 15 1>; + }; + gpio_fan_cool: gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio2 14 1 + &gpio2 13 1>; + gpio-fan,speed-map = <0 0>, + <3000 1>, + <6000 2>; + alarm-gpios = <&gpio2 15 1>; + #cooling-cells = <2>; /* min followed by max */ + }; diff --git a/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml b/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml new file mode 100644 index 000000000..4a52aac6b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/hpe,gxp-fan-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HPE GXP Fan Controller + +maintainers: + - Nick Hawkins <nick.hawkins@hpe.com> + +description: | + The HPE GXP fan controller controls the fans through an external CPLD + device that connects to the fans. + +properties: + compatible: + const: hpe,gxp-fan-ctrl + + reg: + items: + - description: Fan controller PWM + - description: Programmable logic + - description: Function 2 + + reg-names: + items: + - const: base + - const: pl + - const: fn2 + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + fan-controller@1000c00 { + compatible = "hpe,gxp-fan-ctrl"; + reg = <0x1000c00 0x200>, <0xd1000000 0xff>, <0x80200000 0x100000>; + reg-names = "base", "pl", "fn2"; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml new file mode 100644 index 000000000..3dbdc5af2 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM On-Chip Controller (OCC) accessed from a service processor + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + The POWER processor On-Chip Controller (OCC) helps manage power and + thermals for the system. A service processor or baseboard management + controller can query the OCC for it's power and thermal data to report + through hwmon. + +properties: + compatible: + enum: + - ibm,p9-occ-hwmon + - ibm,p10-occ-hwmon + + ibm,no-poll-on-init: + description: This property describes whether or not the OCC should + be polled during driver initialization. + type: boolean + +required: + - compatible + +additionalProperties: false + +examples: + - | + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt new file mode 100644 index 000000000..5dc5d2e25 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt @@ -0,0 +1,25 @@ +Device-tree bindings for I2C-based On-Chip Controller hwmon device +------------------------------------------------------------------ + +Required properties: + - compatible = "ibm,p8-occ-hwmon"; + - reg = <I2C address>; : I2C bus address + +Examples: + + i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + < more properties > + + occ-hwmon@1 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x50>; + }; + + occ-hwmon@2 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x51>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt new file mode 100644 index 000000000..f93242be6 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt @@ -0,0 +1,23 @@ +IBM POWERNV platform sensors +---------------------------- + +Required node properties: +- compatible: must be one of + "ibm,opal-sensor-cooling-fan" + "ibm,opal-sensor-amb-temp" + "ibm,opal-sensor-power-supply" + "ibm,opal-sensor-power" +- sensor-id: an opaque id provided by the firmware to the kernel, identifies a + given sensor and its attribute data + +Example sensors node: + +cooling-fan#8-data { + sensor-id = <0x7052107>; + compatible = "ibm,opal-sensor-cooling-fan"; +}; + +amb-temp#1-thrs { + sensor-id = <0x5096000>; + compatible = "ibm,opal-sensor-amb-temp"; +}; diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml new file mode 100644 index 000000000..e5b24782f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/iio-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC-attached Hardware Sensor + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: > + Bindings for hardware monitoring devices connected to ADC controllers + supporting the Industrial I/O bindings. + +properties: + compatible: + const: iio-hwmon + + io-channels: + minItems: 1 + maxItems: 8 # Should be enough + description: > + List of phandles to ADC channels to read the monitoring values + +required: + - compatible + - io-channels + +additionalProperties: false + +examples: + - | + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 1>, <&adc 2>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt new file mode 100644 index 000000000..fa63b6171 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt @@ -0,0 +1,54 @@ +Texas Instruments INA3221 Device Tree Bindings + +1) ina3221 node + Required properties: + - compatible: Must be "ti,ina3221" + - reg: I2C address + + Optional properties: + - ti,single-shot: This chip has two power modes: single-shot (chip takes one + measurement and then shuts itself down) and continuous ( + chip takes continuous measurements). The continuous mode is + more reliable and suitable for hardware monitor type device, + but the single-shot mode is more power-friendly and useful + for battery-powered device which cares power consumptions + while still needs some measurements occasionally. + If this property is present, the single-shot mode will be + used, instead of the default continuous one for monitoring. + + = The node contains optional child nodes for three channels = + = Each child node describes the information of input source = + + - #address-cells: Required only if a child node is present. Must be 1. + - #size-cells: Required only if a child node is present. Must be 0. + +2) child nodes + Required properties: + - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221 + + Optional properties: + - label: Name of the input source + - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm + +Example: + +ina3221@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + status = "disabled"; + }; + input@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <5000>; + }; + input@2 { + reg = <0x2>; + label = "VDD_5V"; + shunt-resistor-micro-ohms = <5000>; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml new file mode 100644 index 000000000..bf3332153 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Jedec JC-42.4 compatible temperature sensors + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +select: + properties: + compatible: + const: jedec,jc-42.4-temp + + required: + - compatible + +properties: + compatible: + oneOf: + - const: jedec,jc-42.4-temp + - items: + - enum: + - adi,adt7408 + - atmel,at30ts00 + - atmel,at30tse004 + - idt,tse2002 + - idt,tse2004 + - idt,ts3000 + - idt,ts3001 + - maxim,max6604 + - microchip,mcp9804 + - microchip,mcp9805 + - microchip,mcp9808 + - microchip,mcp98243 + - microchip,mcp98244 + - microchip,mcp9843 + - nxp,se97 + - nxp,se97b + - nxp,se98 + - onnn,cat6095 + - onnn,cat34ts02 + - st,stts2002 + - st,stts2004 + - st,stts3000 + - st,stts424 + - st,stts424e + - const: jedec,jc-42.4-temp + + reg: + maxItems: 1 + + smbus-timeout-disable: + description: | + When set, the smbus timeout function will be disabled. This is not + supported on all chips. + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@1a { + compatible = "jedec,jc-42.4-temp"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml new file mode 100644 index 000000000..010333cb2 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hardware monitoring driver for the sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + +properties: + compatible: + enum: + - kontron,sl28cpld-fan + + reg: + maxItems: 1 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml new file mode 100644 index 000000000..e62aff670 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTC4151 High Voltage I2C Current and Voltage Monitor + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + const: lltc,ltc4151 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: + Shunt resistor value in micro-Ohms + default: 1000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@6e { + compatible = "lltc,ltc4151"; + reg = <0x6e>; + shunt-resistor-micro-ohms = <1500>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml new file mode 100644 index 000000000..0b69897f0 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/lm75.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LM75 hwmon sensor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + enum: + - adi,adt75 + - atmel,at30ts74 + - dallas,ds1775 + - dallas,ds75 + - dallas,ds7505 + - gmt,g751 + - national,lm75 + - national,lm75a + - national,lm75b + - maxim,max6625 + - maxim,max6626 + - maxim,max31725 + - maxim,max31726 + - maxim,mcp980x + - nxp,pct2075 + - st,stds75 + - st,stlm75 + - microchip,tcn75 + - ti,tmp1075 + - ti,tmp100 + - ti,tmp101 + - ti,tmp105 + - ti,tmp112 + - ti,tmp175 + - ti,tmp275 + - ti,tmp75 + - ti,tmp75b + - ti,tmp75c + + reg: + maxItems: 1 + + vs-supply: + description: phandle to the regulator that provides the +VS supply + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; + vs-supply = <&vs>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt new file mode 100644 index 000000000..758ff398b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm87.txt @@ -0,0 +1,30 @@ +*LM87 hwmon sensor. + +Required properties: +- compatible: Should be + "ti,lm87" + +- reg: I2C address + +optional properties: +- has-temp3: This configures pins 18 and 19 to be used as a second + remote temperature sensing channel. By default the pins + are configured as voltage input pins in0 and in5. + +- has-in6: When set, pin 5 is configured to be used as voltage input + in6. Otherwise the pin is set as FAN1 input. + +- has-in7: When set, pin 6 is configured to be used as voltage input + in7. Otherwise the pin is set as FAN2 input. + +- vcc-supply: a Phandle for the regulator supplying power, can be + configured to measure 5.0V power supply. Default is 3.3V. + +Example: + +lm87@2e { + compatible = "ti,lm87"; + reg = <0x2e>; + has-temp3; + vcc-supply = <®_5v0>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt new file mode 100644 index 000000000..4e7f6215a --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -0,0 +1,62 @@ +ltc2978 + +Required properties: +- compatible: should contain one of: + * "lltc,ltc2972" + * "lltc,ltc2974" + * "lltc,ltc2975" + * "lltc,ltc2977" + * "lltc,ltc2978" + * "lltc,ltc2979" + * "lltc,ltc2980" + * "lltc,ltc3880" + * "lltc,ltc3882" + * "lltc,ltc3883" + * "lltc,ltc3884" + * "lltc,ltc3886" + * "lltc,ltc3887" + * "lltc,ltc3889" + * "lltc,ltc7880" + * "lltc,ltm2987" + * "lltc,ltm4664" + * "lltc,ltm4675" + * "lltc,ltm4676" + * "lltc,ltm4677" + * "lltc,ltm4678" + * "lltc,ltm4680" + * "lltc,ltm4686" + * "lltc,ltm4700" +- reg: I2C slave address + +Optional properties: +- regulators: A node that houses a sub-node for each regulator controlled by + the device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + +Valid names of regulators depend on number of supplies supported per device: + * ltc2972 vout0 - vout1 + * ltc2974, ltc2975 : vout0 - vout3 + * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7 + * ltc2978 : vout0 - vout7 + * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1 + * ltc7880 : vout0 - vout1 + * ltc3883 : vout0 + * ltm4664 : vout0 - vout1 + * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1 + * ltm4680, ltm4686 : vout0 - vout1 + * ltm4700 : vout0 - vout1 + +Example: +ltc2978@5e { + compatible = "lltc,ltc2978"; + reg = <0x5e>; + regulators { + vout0 { + regulator-name = "FPGA-2.5V"; + }; + vout2 { + regulator-name = "FPGA-1.5V"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ltc2990.txt b/Documentation/devicetree/bindings/hwmon/ltc2990.txt new file mode 100644 index 000000000..f92f54029 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltc2990.txt @@ -0,0 +1,36 @@ +ltc2990: Linear Technology LTC2990 power monitor + +Required properties: +- compatible: Must be "lltc,ltc2990" +- reg: I2C slave address +- lltc,meas-mode: + An array of two integers for configuring the chip measurement mode. + + The first integer defines the bits 2..0 in the control register. In all + cases the internal temperature and supply voltage are measured. In + addition the following input measurements are enabled per mode: + + 0: V1, V2, TR2 + 1: V1-V2, TR2 + 2: V1-V2, V3, V4 + 3: TR1, V3, V4 + 4: TR1, V3-V4 + 5: TR1, TR2 + 6: V1-V2, V3-V4 + 7: V1, V2, V3, V4 + + The second integer defines the bits 4..3 in the control register. This + allows a subset of the measurements to be enabled: + + 0: Internal temperature and supply voltage only + 1: TR1, V1 or V1-V2 only per mode + 2: TR2, V3 or V3-V4 only per mode + 3: All measurements per mode + +Example: + +ltc2990@4c { + compatible = "lltc,ltc2990"; + reg = <0x4c>; + lltc,meas-mode = <7 3>; /* V1, V2, V3, V4 */ +}; diff --git a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt new file mode 100644 index 000000000..473b34c87 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt @@ -0,0 +1,10 @@ +Lantiq cpu temperature sensor + +Requires node properties: +- compatible value : + "lantiq,cputemp" + +Example: + cputemp@0 { + compatible = "lantiq,cputemp"; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt new file mode 100644 index 000000000..106e08c56 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max31785.txt @@ -0,0 +1,22 @@ +Bindings for the Maxim MAX31785 Intelligent Fan Controller +========================================================== + +Reference: + +https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + +The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan +management with temperature and remote voltage sensing. Various fan control +features are provided, including PWM frequency control, temperature hysteresis, +dual tachometer measurements, and fan health monitoring. + +Required properties: +- compatible : One of "maxim,max31785" or "maxim,max31785a" +- reg : I2C address, one of 0x52, 0x53, 0x54, 0x55. + +Example: + + fans@52 { + compatible = "maxim,max31785"; + reg = <0x52>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt new file mode 100644 index 000000000..f6bd87d8e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max6650.txt @@ -0,0 +1,28 @@ +Bindings for MAX6651 and MAX6650 I2C fan controllers + +Reference: +[1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf + +Required properties: +- compatible : One of "maxim,max6650" or "maxim,max6651" +- reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48. + +Optional properties, default is to retain the chip's current setting: +- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or + 12000000 uV. +- maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values + allow more fine-grained control of slower fans. + Valid: 1, 2, 4, 8, 16. +- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the + driver selects closed-loop mode and the requested speed. + This ensures the fan is already running before userspace + takes over. + +Example: + fan-max6650: max6650@1b { + reg = <0x1b>; + compatible = "maxim,max6650"; + maxim,fan-microvolt = <12000000>; + maxim,fan-prescale = <4>; + maxim,fan-target-rpm = <1200>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max6697.txt b/Documentation/devicetree/bindings/hwmon/max6697.txt new file mode 100644 index 000000000..5f793998e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max6697.txt @@ -0,0 +1,64 @@ +max6697 properties + +Required properties: +- compatible: + Should be one of + maxim,max6581 + maxim,max6602 + maxim,max6622 + maxim,max6636 + maxim,max6689 + maxim,max6693 + maxim,max6694 + maxim,max6697 + maxim,max6698 + maxim,max6699 +- reg: I2C address + +Optional properties: + +- smbus-timeout-disable + Set to disable SMBus timeout. If not specified, SMBus timeout will be + enabled. +- extended-range-enable + Only valid for MAX6581. Set to enable extended temperature range. + Extended temperature will be disabled if not specified. +- beta-compensation-enable + Only valid for MAX6693 and MX6694. Set to enable beta compensation on + remote temperature channel 1. + Beta compensation will be disabled if not specified. +- alert-mask + Alert bit mask. Alert disabled for bits set. + Select bit 0 for local temperature, bit 1..7 for remote temperatures. + If not specified, alert will be enabled for all channels. +- over-temperature-mask + Over-temperature bit mask. Over-temperature reporting disabled for + bits set. + Select bit 0 for local temperature, bit 1..7 for remote temperatures. + If not specified, over-temperature reporting will be enabled for all + channels. +- resistance-cancellation + Boolean for all chips other than MAX6581. Set to enable resistance + cancellation on remote temperature channel 1. + For MAX6581, resistance cancellation enabled for all channels if + specified as boolean, otherwise as per bit mask specified. + Only supported for remote temperatures (bit 1..7). + If not specified, resistance cancellation will be disabled for all + channels. +- transistor-ideality + For MAX6581 only. Two values; first is bit mask, second is ideality + select value as per MAX6581 data sheet. Select bit 1..7 for remote + channels. + Transistor ideality will be initialized to default (1.008) if not + specified. + +Example: + +temp-sensor@1a { + compatible = "maxim,max6697"; + reg = <0x1a>; + smbus-timeout-disable; + resistance-cancellation; + alert-mask = <0x72>; + over-temperature-mask = <0x7f>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml new file mode 100644 index 000000000..93e86e3b4 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/maxim,max20730.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim max20730 + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +description: | + The MAX20730 is a fully integrated, highly efficient switching regulator + with PMBus for applications operating from 4.5V to 16V and requiring + up to 25A (max) load. This single-chip regulator provides extremely + compact, high efficiency power-delivery solutions with high-precision + output voltages and excellent transient response. + + Datasheets: + https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf + https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf + https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf + +properties: + compatible: + enum: + - maxim,max20730 + - maxim,max20734 + - maxim,max20743 + + reg: + maxItems: 1 + + vout-voltage-divider: + description: | + If voltage divider present at vout, the voltage at voltage sensor pin + will be scaled. The properties will convert the raw reading to a more + meaningful number if voltage divider present. It has two numbers, + the first number is the output resistor, the second number is the total + resistance. Therefore, the adjusted vout is equal to + Vout = Vout * output_resistance / total resistance. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + max20730@10 { + compatible = "maxim,max20730"; + reg = <0x10>; + vout-voltage-divider = <1000 2000>; // vout would be scaled to 0.5 + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml new file mode 100644 index 000000000..390dd6755 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/microchip,lan966x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip LAN966x Hardware Monitor + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + Microchip LAN966x temperature monitor and fan controller + +properties: + compatible: + enum: + - microchip,lan9668-hwmon + + reg: + items: + - description: PVT registers + - description: FAN registers + + reg-names: + items: + - const: pvt + - const: fan + + clocks: + maxItems: 1 + + '#thermal-sensor-cells': + const: 0 + +required: + - compatible + - reg + - reg-names + - clocks + +additionalProperties: false + +examples: + - | + hwmon: hwmon@e2010180 { + compatible = "microchip,lan9668-hwmon"; + reg = <0xe2010180 0xc>, + <0xe20042a8 0xc>; + reg-names = "pvt", "fan"; + clocks = <&sys_clk>; + #thermal-sensor-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml new file mode 100644 index 000000000..f5e104c1b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP3021 A/D converter + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - microchip,mcp3021 + - microchip,mcp3221 + + reg: + maxItems: 1 + + reference-voltage-microvolt: + description: + VDD supply power and reference voltage + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@4d { + compatible = "microchip,mcp3021"; + reg = <0x4d>; + + reference-voltage-microvolt = <4500000>; /* 4.5 V */ + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml new file mode 100644 index 000000000..51e8619db --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/microchip,sparx5-temp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Sparx5 Temperature Monitor + +maintainers: + - Lars Povlsen <lars.povlsen@microchip.com> + +description: | + Microchip Sparx5 embedded temperature monitor + +properties: + compatible: + enum: + - microchip,sparx5-temp + + reg: + maxItems: 1 + + clocks: + items: + - description: System reference clock + + '#thermal-sensor-cells': + const: 0 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + tmon0: tmon@610508110 { + compatible = "microchip,sparx5-temp"; + reg = <0x10508110 0xc>; + #thermal-sensor-cells = <0>; + clocks = <&sys_clk>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml new file mode 100644 index 000000000..56db2292f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Moortec Semiconductor MR75203 PVT Controller + +maintainers: + - Rahul Tanwar <rtanwar@maxlinear.com> + +description: | + A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can + include many different units. + Such a design will usually consists of several Moortec's embedded analog IPs, + and a single Moortec controller (mr75203) to configure and control the IPs. + + Some of the Moortec's analog hard IPs that can be used in a design: + *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137). + *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138). + *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139). + *) Delay Chain - ring oscillator connected to the PD, used to measure IO + based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring + oscillator at 1.8V). + *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then + be presented for VM for measurement within its range (e.g. mr76006 - + divide by 2 pre-scaler). + + TS, VM & PD also include a digital interface, which consists of configuration + inputs and measurement outputs. + + Some of the units have number of series, each series can have slightly + different characteristics. + + The mr75203 binding describes configuration for the controller unit, but also + for some of the analog IPs. + +properties: + compatible: + const: moortec,mr75203 + + reg: + items: + - description: PVT common registers + - description: PVT temperature sensor registers + - description: PVT process detector registers + - description: PVT voltage monitor registers + + reg-names: + items: + - const: common + - const: ts + - const: pd + - const: vm + + intel,vm-map: + description: + PVT controller has 5 VM (voltage monitor) sensors. + vm-map defines CPU core to VM instance mapping. A + value of 0xff means that VM sensor is unused. + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 5 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + + moortec,vm-active-channels: + description: + Defines the number of channels per VM that are actually used and are + connected to some input source. + Maximum number of items - number of VMs. + Maximum value of each item - number of channels. + Minimum value of each item - 0 (which means entire VM sensor is not used). + $ref: /schemas/types.yaml#/definitions/uint8-array + + moortec,vm-pre-scaler-x2: + description: + Defines the channels that use a mr76006 pre-scaler to divide the input + source by 2. + The pre-scaler is used for input sources that exceed the VM input range. + The driver uses this information to present to the user with the actual + value of the voltage source. + For channels that are not listed, no pre-scaler is assumed. + Maximum number of items - total number of channels in all VMs. + Each channel should not appear more than once. + $ref: /schemas/types.yaml#/definitions/uint8-array + + moortec,ts-series: + description: + Definition of the temperature equation and coefficients that shall be + used to convert the digital output to value in milli-Celsius. + minimum: 5 + maximum: 6 + default: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-g: + description: + G coefficient for temperature equation. + Default for series 5 = 60000 + Default for series 6 = 57400 + multipleOf: 100 + minimum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-h: + description: + H coefficient for temperature equation. + Default for series 5 = 200000 + Default for series 6 = 249400 + multipleOf: 100 + minimum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-cal5: + description: + cal5 coefficient for temperature equation. + Default for series 5 = 4094 + Default for series 6 = 4096 + minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-j: + description: + J coefficient for temperature equation. + Default for series 5 = -100 + Default for series 6 = 0 + multipleOf: 100 + maximum: 0 + $ref: /schemas/types.yaml#/definitions/int32 + +required: + - compatible + - reg + - reg-names + - clocks + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + pvt: pvt@e0680000 { + compatible = "moortec,mr75203"; + reg = <0xe0680000 0x80>, + <0xe0680080 0x180>, + <0xe0680200 0x200>, + <0xe0680400 0xc00>; + reg-names = "common", "ts", "pd", "vm"; + intel,vm-map = [03 01 04 ff ff]; + clocks = <&osc0>; + resets = <&rcu0 0x40 7>; + moortec,vm-active-channels = /bits/ 8 <0x10 0x05>; + moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>; + moortec,ts-coeff-g = <61400>; + moortec,ts-coeff-h = <253700>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml new file mode 100644 index 000000000..6e59c8fde --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml @@ -0,0 +1,227 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/national,lm90.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LM90 series thermometer + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + enum: + - adi,adm1032 + - adi,adt7461 + - adi,adt7461a + - adi,adt7481 + - dallas,max6646 + - dallas,max6647 + - dallas,max6649 + - dallas,max6657 + - dallas,max6658 + - dallas,max6659 + - dallas,max6680 + - dallas,max6681 + - dallas,max6695 + - dallas,max6696 + - gmt,g781 + - national,lm86 + - national,lm89 + - national,lm90 + - national,lm99 + - nxp,sa56004 + - onnn,nct1008 + - ti,tmp451 + - ti,tmp461 + - winbond,w83l771 + + + interrupts: + items: + - description: | + Single interrupt specifier which describes the LM90 "-ALERT" pin + output. + + reg: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + vcc-supply: + description: phandle to the regulator that provides the +VCC supply + + ti,extended-range-enable: + description: Set to enable extended range temperature. + type: boolean + +required: + - compatible + - reg + +patternProperties: + "^channel@([0-2])$": + type: object + description: Represents channels of the device and their specific configuration. + + properties: + reg: + description: The channel number. 0 is local channel, 1-2 are remote channels. + items: + minimum: 0 + maximum: 2 + + label: + description: A descriptive name for this channel, like "ambient" or "psu". + + temperature-offset-millicelsius: + description: Temperature offset to be added to or subtracted from remote temperature measurements. + + required: + - reg + + additionalProperties: false + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - adi,adt7461 + - adi,adt7461a + - adi,adt7481 + - ti,tmp451 + - ti,tmp461 + then: + properties: + ti,extended-range-enable: false + + - if: + properties: + compatible: + contains: + enum: + - dallas,max6646 + - dallas,max6647 + - dallas,max6649 + - dallas,max6657 + - dallas,max6658 + - dallas,max6659 + - dallas,max6695 + - dallas,max6696 + then: + patternProperties: + "^channel@([0-2])$": + properties: + temperature-offset-millicelsius: false + + - if: + properties: + compatible: + contains: + enum: + - adi,adt7461 + - adi,adt7461a + - adi,adt7481 + - onnn,nct1008 + then: + patternProperties: + "^channel@([0-2])$": + properties: + temperature-offset-millicelsius: + maximum: 127750 + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1032 + - dallas,max6680 + - dallas,max6681 + - gmt,g781 + - national,lm86 + - national,lm89 + - national,lm90 + - national,lm99 + - nxp,sa56004 + - winbond,w83l771 + then: + patternProperties: + "^channel@([0-2])$": + properties: + temperature-offset-millicelsius: + maximum: 127875 + + - if: + properties: + compatible: + contains: + enum: + - ti,tmp451 + - ti,tmp461 + then: + patternProperties: + "^channel@([0-2])$": + properties: + temperature-offset-millicelsius: + maximum: 127937 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&palmas_ldo6_reg>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "adi,adt7481"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "local"; + }; + + channel@1 { + reg = <0x1>; + label = "front"; + temperature-offset-millicelsius = <4000>; + }; + + channel@2 { + reg = <0x2>; + label = "back"; + temperature-offset-millicelsius = <750>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt new file mode 100644 index 000000000..8523777f5 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt @@ -0,0 +1,84 @@ +Nuvoton NPCM7xx PWM and Fan Tacho controller device + +The Nuvoton BMC NPCM7XX supports 8 Pulse-width modulation (PWM) +controller outputs and 16 Fan tachometer controller inputs. + +Required properties for pwm-fan node +- #address-cells : should be 1. +- #size-cells : should be 0. +- compatible : "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX. +- reg : specifies physical base address and size of the registers. +- reg-names : must contain: + * "pwm" for the PWM registers. + * "fan" for the Fan registers. +- clocks : phandle of reference clocks. +- clock-names : must contain + * "pwm" for PWM controller operating clock. + * "fan" for Fan controller operating clock. +- interrupts : contain the Fan interrupts with flags for falling edge. +- pinctrl-names : a pinctrl state named "default" must be defined. +- pinctrl-0 : phandle referencing pin configuration of the PWM and Fan + controller ports. + +fan subnode format: +=================== +Under fan subnode can be upto 8 child nodes, each child node representing a fan. +Each fan subnode must have one PWM channel and at least one Fan tach channel. + +For PWM channel can be configured cooling-levels to create cooling device. +Cooling device could be bound to a thermal zone for the thermal control. + +Required properties for each child node: +- reg : specify the PWM output channel. + integer value in the range 0 through 7, that represent + the PWM channel number that used. + +- fan-tach-ch : specify the Fan tach input channel. + integer value in the range 0 through 15, that represent + the fan tach channel number that used. + + At least one Fan tach input channel is required + +Optional property for each child node: +- cooling-levels: PWM duty cycle values in a range from 0 to 255 + which correspond to thermal cooling states. + +Examples: + +pwm_fan:pwm-fan-controller@103000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nuvoton,npcm750-pwm-fan"; + reg = <0x103000 0x2000>, + <0x180000 0x8000>; + reg-names = "pwm", "fan"; + clocks = <&clk NPCM7XX_CLK_APB3>, + <&clk NPCM7XX_CLK_APB4>; + clock-names = "pwm","fan"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins + &fanin0_pins &fanin1_pins &fanin2_pins + &fanin3_pins &fanin4_pins>; + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00 0x01>; + cooling-levels = <127 255>; + }; + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x04>; + }; + +}; diff --git a/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt new file mode 100644 index 000000000..0863e067c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt @@ -0,0 +1,20 @@ +Bindings for the fan / temperature monitor microcontroller used on +the Zyxel NSA 320 and several subsequent models. + +Required properties: +- compatible : "zyxel,nsa320-mcu" +- data-gpios : The GPIO pin connected to the data line on the MCU +- clk-gpios : The GPIO pin connected to the clock line on the MCU +- act-gpios : The GPIO pin connected to the active line on the MCU + +Example: + + hwmon { + compatible = "zyxel,nsa320-mcu"; + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; + pinctrl-names = "default"; + + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml new file mode 100644 index 000000000..3d0146e20 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +--- +$id: http://devicetree.org/schemas/hwmon/ntc-thermistor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NTC thermistor temperature sensors + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + Thermistors with negative temperature coefficient (NTC) are resistors that + vary in resistance in an often non-linear way in relation to temperature. + The negative temperature coefficient means that the resistance decreases + as the temperature rises. Since the relationship between resistance and + temperature is non-linear, software drivers most often need to use a look + up table and interpolation to get from resistance to temperature. + + When used in practice, a thermistor is often connected between ground, a + pull-up resistor or/and a pull-down resistor and a fixed voltage like this: + + + e.g. 5V = pull-up voltage (puv) + | + +-+ + | | + | | Pull-up resistor + | | (puo) + +-+ + |-------------------------o + +-+ | ^ + | |/ | + | / | + |/| Thermistor | Measured voltage (mv) + / | | "connected ground" + /| | | + +-+ | + |-------------------------o + +-+ ^ + | | | + | | Pull-down resistor | Measured voltage (mv) + | | (pdo) | "connected positive" + +-+ | + | | + | v + + GND GND + + The arrangements of where we measure the voltage over the thermistor are + called "connected ground" and "connected positive" and shall be understood as + the cases when either pull-up or pull-down resistance is zero. + + If the pull-up resistance is 0 one end of the thermistor is connected to the + positive voltage and we get the thermistor on top of a pull-down resistor + and we take the measure between the thermistor and the pull-down resistor. + + Conversely if the pull-down resistance is zero, one end of the thermistor is + connected to ground and we get the thermistor under the pull-up resistor + and we take the measure between the pull-up resistor and the thermistor. + + We can use both pull-up and pull-down resistors at the same time, and then + the figure illustrates where the voltage will be measured for the "connected + ground" and "connected positive" cases. + +properties: + $nodename: + pattern: "^thermistor(.*)?$" + + compatible: + oneOf: + - const: epcos,b57330v2103 + - const: epcos,b57891s0103 + - const: murata,ncp15wb473 + - const: murata,ncp18wb473 + - const: murata,ncp21wb473 + - const: murata,ncp03wb473 + - const: murata,ncp15wl333 + - const: murata,ncp03wf104 + - const: murata,ncp15xh103 + - const: samsung,1404-001221 + # Deprecated "ntp," compatible strings + - const: ntc,ncp15wb473 + deprecated: true + - const: ntc,ncp18wb473 + deprecated: true + - const: ntc,ncp21wb473 + deprecated: true + - const: ntc,ncp03wb473 + deprecated: true + - const: ntc,ncp15wl333 + deprecated: true + + "#thermal-sensor-cells": + description: Thermal sensor cells if used for thermal sensoring. + const: 0 + + pullup-uv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Pull-up voltage in micro volts. Must always be specified. + + pullup-ohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Pull-up resistance in ohms. Must always be specified, even + if zero. + + pulldown-ohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Pull-down resistance in ohms. Must always be specified, even + if zero. + + connected-positive: + $ref: /schemas/types.yaml#/definitions/flag + description: Indicates how the thermistor is connected in series with + a pull-up and/or a pull-down resistor. See the description above for + an illustration. If this flag is NOT specified, the thermistor is assumed + to be connected-ground, which usually means a pull-down resistance of + zero but complex arrangements are possible. + + # See /schemas/iio/adc/adc.yaml + io-channels: + maxItems: 1 + description: IIO ADC channel to read the voltage over the resistor. Must + always be specified. + +required: + - compatible + - pullup-uv + - pullup-ohm + - pulldown-ohm + - io-channels + +additionalProperties: false + +examples: + - | + thermistor { + compatible = "murata,ncp18wb473"; + io-channels = <&gpadc 0x06>; + pullup-uv = <1800000>; + pullup-ohm = <220000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml new file mode 100644 index 000000000..358b26243 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/nuvoton,nct6775.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NCT6775 and compatible Super I/O chips + +maintainers: + - Zev Weiss <zev@bewilderbeest.net> + +properties: + compatible: + enum: + - nuvoton,nct6106 + - nuvoton,nct6116 + - nuvoton,nct6775 + - nuvoton,nct6776 + - nuvoton,nct6779 + - nuvoton,nct6791 + - nuvoton,nct6792 + - nuvoton,nct6793 + - nuvoton,nct6795 + - nuvoton,nct6796 + - nuvoton,nct6797 + - nuvoton,nct6798 + + reg: + maxItems: 1 + + nuvoton,tsi-channel-mask: + description: + Bitmask indicating which TSI temperature sensor channels are + active. LSB is TSI0, bit 1 is TSI1, etc. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0xff + default: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + superio@4d { + compatible = "nuvoton,nct6779"; + reg = <0x4d>; + nuvoton,tsi-channel-mask = <0x03>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml new file mode 100644 index 000000000..cd8dcd797 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/nuvoton,nct7802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NCT7802Y Hardware Monitoring IC + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +description: | + The NCT7802Y is a hardware monitor IC which supports one on-die and up to + 5 remote temperature sensors with SMBus interface. + + Datasheets: + https://www.nuvoton.com/export/resource-files/Nuvoton_NCT7802Y_Datasheet_V12.pdf + +additionalProperties: false + +properties: + compatible: + enum: + - nuvoton,nct7802 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@[0-3]$": + type: object + + additionalProperties: false + + properties: + reg: + items: + - enum: + - 0 # Local Temperature Sensor ("LTD") + - 1 # Remote Temperature Sensor or Voltage Sensor 1 ("RTD1") + - 2 # Remote Temperature Sensor or Voltage Sensor 2 ("RTD2") + - 3 # Remote Temperature Sensor or Voltage Sensor 3 ("RTD3") + + sensor-type: + items: + - enum: + - temperature + - voltage + + temperature-mode: + items: + - enum: + - thermistor + - thermal-diode + + required: + - reg + + allOf: + # For channels RTD1, RTD2 and RTD3, require sensor-type to be set. + # Otherwise (for all other channels), do not allow temperature-mode to be + # set. + - if: + properties: + reg: + items: + - enum: + - 1 + - 2 + - 3 + then: + required: + - sensor-type + else: + not: + required: + - sensor-type + + # For channels RTD1 and RTD2 and if sensor-type is "temperature", require + # temperature-mode to be set. Otherwise (for all other channels or + # sensor-type settings), do not allow temperature-mode to be set + - if: + properties: + reg: + items: + - enum: + - 1 + - 2 + sensor-type: + items: + - enum: + - temperature + then: + required: + - temperature-mode + else: + not: + required: + - temperature-mode + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nct7802@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* LTD */ + reg = <0>; + }; + + channel@1 { /* RTD1 */ + reg = <1>; + sensor-type = "voltage"; + }; + + channel@2 { /* RTD2 */ + reg = <2>; + sensor-type = "temperature"; + temperature-mode = "thermal-diode"; + }; + + channel@3 { /* RTD3 */ + reg = <3>; + sensor-type = "temperature"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml new file mode 100644 index 000000000..48d654e52 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/nxp,mc34vr500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP MC34VR500 hwmon sensor + +maintainers: + - Mario Kicherer <dev@kicherer.org> + +properties: + compatible: + enum: + - nxp,mc34vr500 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "nxp,mc34vr500"; + reg = <0x08>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml new file mode 100644 index 000000000..da8292bc3 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/pmbus/ti,lm25066.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: National Semiconductor/Texas Instruments LM250x6/LM506x power-management ICs + +maintainers: + - Zev Weiss <zev@bewilderbeest.net> + +description: | + The LM25066 family of power-management ICs (a.k.a. hot-swap + controllers or eFuses in various contexts) are PMBus devices that + offer temperature, current, voltage, and power monitoring. + + Datasheet: https://www.ti.com/lit/ds/symlink/lm25066.pdf + +properties: + compatible: + enum: + - ti,lm25056 + - ti,lm25066 + - ti,lm5064 + - ti,lm5066 + - ti,lm5066i + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: + Shunt (sense) resistor value in micro-Ohms + default: 1000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@40 { + compatible = "ti,lm25066"; + reg = <0x40>; + shunt-resistor-micro-ohms = <675>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml new file mode 100644 index 000000000..e8feee38c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/pmbus/ti,ucd90320.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UCD90320 power sequencer + +maintainers: + - Jim Wright <wrightj@linux.vnet.ibm.com> + +description: | + The UCD90320 is a 32-rail PMBus/I2C addressable power-supply sequencer and + monitor. The 24 integrated ADC channels (AMONx) monitor the power supply + voltage, current, and temperature. Of the 84 GPIO pins, 8 can be used as + digital monitors (DMONx), 32 to enable the power supply (ENx), 24 for + margining (MARx), 16 for logical GPO, and 32 GPIs for cascading, and system + function. + + http://focus.ti.com/lit/ds/symlink/ucd90320.pdf + +properties: + compatible: + enum: + - ti,ucd90320 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ucd90320@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt new file mode 100644 index 000000000..48886f0ce --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -0,0 +1 @@ +This file has moved to pwm-fan.yaml. diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml new file mode 100644 index 000000000..4e5abf758 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fan connected to PWM lines + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + const: pwm-fan + + cooling-levels: + description: PWM duty cycle values corresponding to thermal cooling states. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + maximum: 255 + + fan-supply: + description: Phandle to the regulator that provides power to the fan. + + interrupts: + description: + This contains an interrupt specifier for each fan tachometer output + connected to an interrupt source. The output signal must generate a + defined number of interrupts per fan revolution, which require that + it must be self resetting edge interrupts. + maxItems: 1 + + pulses-per-revolution: + description: + Define the number of pulses per fan revolution for each tachometer + input as an integer. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + default: 2 + + pwms: + description: The PWM that is used to control the fan. + maxItems: 1 + + "#cooling-cells": true + +required: + - compatible + - pwms + +additionalProperties: false + +examples: + - | + pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 102 170 230>; + pwms = <&pwm 0 10000 0>; + #cooling-cells = <2>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + + trips { + cpu_alert1: cpu-alert1 { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 0 1>; + }; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 40000 0>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml new file mode 100644 index 000000000..14ac783c9 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SHT15 humidity and temperature sensor + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + const: sensirion,sht15 + + clk-gpios: + maxItems: 1 + + data-gpios: + maxItems: 1 + + vcc-supply: + description: regulator that drives the VCC pin + +required: + - compatible + - clk-gpios + - data-gpios + - vcc-supply + +additionalProperties: false + +examples: + - | + sensor { + compatible = "sensirion,sht15"; + clk-gpios = <&gpio4 12 0>; + data-gpios = <&gpio4 13 0>; + vcc-supply = <®_sht15>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensor>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml new file mode 100644 index 000000000..3d14d5fc9 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SHTC1 Humidity and Temperature Sensor IC + +maintainers: + - Christopher Ruehl chris.ruehl@gtsys.com.hk + +description: | + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors + designed especially for battery-driven high-volume consumer electronics + applications. + For further information refer to Documentation/hwmon/shtc1.rst + + This binding document describes the binding for the hardware monitor + portion of the driver. + +properties: + compatible: + enum: + - sensirion,shtc1 + - sensirion,shtw1 + - sensirion,shtc3 + + reg: + const: 0x70 + + sensirion,blocking-io: + $ref: /schemas/types.yaml#/definitions/flag + description: + If set, the driver holds the i2c bus until the measurement is finished. + + sensirion,low-precision: + $ref: /schemas/types.yaml#/definitions/flag + description: + If set, the sensor acquires data with low precision (not recommended). + The driver acquires data with high precision by default. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + + shtc3@70 { + compatible = "sensirion,shtc3"; + reg = <0x70>; + sensirion,blocking-io; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml new file mode 100644 index 000000000..733cba780 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/starfive,jh71x0-temp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH71x0 Temperature Sensor + +maintainers: + - Emil Renner Berthing <kernel@esmil.dk> + +description: | + StarFive Technology Co. JH71x0 embedded temperature sensor + +properties: + compatible: + enum: + - starfive,jh7100-temp + - starfive,jh7110-temp + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: sense + - const: bus + + '#thermal-sensor-cells': + const: 0 + + resets: + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: sense + - const: bus + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive-jh7100.h> + #include <dt-bindings/reset/starfive-jh7100.h> + + temperature-sensor@124a0000 { + compatible = "starfive,jh7100-temp"; + reg = <0x124a0000 0x10000>; + clocks = <&clkgen JH7100_CLK_TEMP_SENSE>, + <&clkgen JH7100_CLK_TEMP_APB>; + clock-names = "sense", "bus"; + #thermal-sensor-cells = <0>; + resets = <&rstgen JH7100_RSTN_TEMP_SENSE>, + <&rstgen JH7100_RSTN_TEMP_APB>; + reset-names = "sense", "bus"; + }; diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt new file mode 100644 index 000000000..3ee1dc30e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/stts751.txt @@ -0,0 +1,15 @@ +* STTS751 thermometer. + +Required node properties: +- compatible: "stts751" +- reg: I2C bus address of the device + +Optional properties: +- smbus-timeout-disable: when set, the smbus timeout function will be disabled + +Example stts751 node: + +temp-sensor { + compatible = "stts751"; + reg = <0x48>; +} diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml new file mode 100644 index 000000000..926be9a29 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/ti,ads7828.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADS7828/ADS7830 Analog to Digital Converter (ADC) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + The ADS7828 is 12-Bit, 8-Channel Sampling Analog to Digital Converter (ADC) + with an I2C interface. + + Datasheets: + https://www.ti.com/product/ADS7828 + +properties: + compatible: + enum: + - ti,ads7828 + - ti,ads7830 + + reg: + maxItems: 1 + + ti,differential-input: + description: + Set to use the device in differential mode. + type: boolean + + vref-supply: + description: + The regulator to use as an external reference. If it does not exists the + internal reference will be used. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@48 { + compatible = "ti,ads7828"; + reg = <0x48>; + vref-supply = <&vref>; + ti,differential-input; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml new file mode 100644 index 000000000..8648877d2 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/ti,ina2xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments INA209 family of power/voltage monitors + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + The INA209 is a high-side current shunt and power monitor with + an I2C interface. + + Datasheets: + https://www.ti.com/product/INA209 + +properties: + compatible: + enum: + - ti,ina209 + - ti,ina219 + - ti,ina220 + - ti,ina226 + - ti,ina230 + - ti,ina231 + - ti,ina238 + + reg: + maxItems: 1 + + shunt-resistor: + description: + Shunt resistor value in micro-Ohm. + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,shunt-gain: + description: | + Programmable gain divisor for the shunt voltage accuracy and range. This + property only applies to devices that have configurable PGA/ADCRANGE. The + gain value is used configure the gain and to convert the shunt voltage, + current and power register values when reading measurements from the + device. + + For devices that have a configurable PGA (e.g. INA209, INA219, INA220), + the gain value maps directly with the PG bits of the config register. + + For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain + value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the + shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider + voltage range is used. + + The default value is device dependent, and is defined by the reset value + of PGA/ADCRANGE in the respective configuration registers. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + + vs-supply: + description: phandle to the regulator that provides the VS supply typically + in range from 2.7 V to 5.5 V. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-sensor@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + vs-supply = <&vdd_3v0>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml new file mode 100644 index 000000000..7e5b62a02 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP102 temperature sensor + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - ti,tmp102 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml new file mode 100644 index 000000000..8b5307c87 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP108 temperature sensor + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - ti,tmp108 + + interrupts: + items: + - description: alert interrupt + + reg: + maxItems: 1 + + "#thermal-sensor-cells": + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tmp_alrt>; + #thermal-sensor-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml new file mode 100644 index 000000000..0e8ddf0ad --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp401.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP401, TPM411 and TMP43x temperature sensor + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +description: | + ±1°C Remote and Local temperature sensor + + Datasheets: + https://www.ti.com/lit/ds/symlink/tmp401.pdf + https://www.ti.com/lit/ds/symlink/tmp411.pdf + https://www.ti.com/lit/ds/symlink/tmp431.pdf + https://www.ti.com/lit/ds/symlink/tmp435.pdf + +properties: + compatible: + enum: + - ti,tmp401 + - ti,tmp411 + - ti,tmp431 + - ti,tmp432 + - ti,tmp435 + + reg: + maxItems: 1 + + ti,extended-range-enable: + description: + When set, this sensor measures over extended temperature range. + type: boolean + + ti,n-factor: + description: + value to be used for converting remote channel measurements to + temperature. + $ref: /schemas/types.yaml#/definitions/int32 + minimum: -128 + maximum: 127 + + ti,beta-compensation: + description: + value to select beta correction range. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,tmp401 + then: + properties: + ti,n-factor: false + + - if: + properties: + compatible: + contains: + enum: + - ti,tmp401 + - ti,tmp411 + then: + properties: + ti,beta-compensation: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp431"; + reg = <0x4c>; + ti,extended-range-enable; + ti,n-factor = <0x3b>; + ti,beta-compensation = <0x7>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml new file mode 100644 index 000000000..a6f1fa75a --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp421.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP42x/TMP44x temperature sensor + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +description: | + ±1°C Remote and Local temperature sensor + https://www.ti.com/lit/ds/symlink/tmp422.pdf + +properties: + compatible: + enum: + - ti,tmp421 + - ti,tmp422 + - ti,tmp423 + - ti,tmp441 + - ti,tmp442 + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "^channel@([0-3])$": + type: object + description: | + Represents channels of the device and their specific configuration. + + properties: + reg: + description: | + The channel number. 0 is local channel, 1-3 are remote channels + items: + minimum: 0 + maximum: 3 + + label: + description: | + A descriptive name for this channel, like "ambient" or "psu". + + ti,n-factor: + description: | + The value (two's complement) to be programmed in the channel specific N correction register. + For remote channels only. + $ref: /schemas/types.yaml#/definitions/int32 + minimum: -128 + maximum: 127 + + required: + - reg + + additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp422"; + reg = <0x4c>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp422"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + ti,n-factor = <0x1>; + label = "local"; + }; + + channel@1 { + reg = <0x1>; + ti,n-factor = <0x0>; + label = "somelabel"; + }; + + channel@2 { + reg = <0x2>; + status = "disabled"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml new file mode 100644 index 000000000..f9c00cbb2 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp464.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP464 and TMP468 temperature sensors + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +description: | + ±0.0625°C Remote and Local temperature sensor + https://www.ti.com/lit/ds/symlink/tmp464.pdf + https://www.ti.com/lit/ds/symlink/tmp468.pdf + +properties: + compatible: + enum: + - ti,tmp464 + - ti,tmp468 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "^channel@([0-8])$": + type: object + description: | + Represents channels of the device and their specific configuration. + + properties: + reg: + description: | + The channel number. 0 is local channel, 1-8 are remote channels. + items: + minimum: 0 + maximum: 8 + + label: + description: | + A descriptive name for this channel, like "ambient" or "psu". + + ti,n-factor: + description: | + The value (two's complement) to be programmed in the channel specific N correction register. + For remote channels only. + $ref: /schemas/types.yaml#/definitions/int32 + minimum: -128 + maximum: 127 + + required: + - reg + + additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4b { + compatible = "ti,tmp464"; + reg = <0x4b>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4b { + compatible = "ti,tmp464"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "local"; + }; + + channel@1 { + reg = <0x1>; + ti,n-factor = <(-10)>; + label = "external"; + }; + + channel@2 { + reg = <0x2>; + ti,n-factor = <0x10>; + label = "somelabel"; + }; + + channel@3 { + reg = <0x3>; + status = "disabled"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml new file mode 100644 index 000000000..cdd1489e0 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/ti,tmp513.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP513/512 system monitor sensor + +maintainers: + - Eric Tremblay <etremblay@distech-controls.com> + +description: | + The TMP512 (dual-channel) and TMP513 (triple-channel) are system monitors + that include remote sensors, a local temperature sensor, and a high-side + current shunt monitor. These system monitors have the capability of measuring + remote temperatures, on-chip temperatures, and system voltage/power/current + consumption. + + Datasheets: + https://www.ti.com/lit/gpn/tmp513 + https://www.ti.com/lit/gpn/tmp512 + + +properties: + compatible: + enum: + - ti,tmp512 + - ti,tmp513 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: | + If 0, the calibration process will be skipped and the current and power + measurement engine will not work. Temperature and voltage measurement + will continue to work. The shunt value also need to respect: + rshunt <= pga-gain * 40 * 1000 * 1000. + If not, it's not possible to compute a valid calibration value. + default: 1000 + + ti,pga-gain: + description: | + The gain value for the PGA function. This is 8, 4, 2 or 1. + The PGA gain affect the shunt voltage range. + The range will be equal to: pga-gain * 40mV + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 8 + + ti,bus-range-microvolt: + description: | + This is the operating range of the bus voltage in microvolt + enum: [16000000, 32000000] + default: 32000000 + + ti,nfactor: + description: | + Array of three(TMP513) or two(TMP512) n-Factor value for each remote + temperature channel. + See datasheet Table 11 for n-Factor range list and value interpretation. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + default: 0x00 + minimum: 0x00 + maximum: 0xFF + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tmp513@5c { + compatible = "ti,tmp513"; + reg = <0x5c>; + shunt-resistor-micro-ohms = <330000>; + ti,bus-range-microvolt = <32000000>; + ti,pga-gain = <8>; + ti,nfactor = <0x1 0xf3 0x00>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml new file mode 100644 index 000000000..ebc8d466c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/ti,tps23861.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS23861 PoE PSE + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +description: | + The TPS23861 is a IEEE 802.3at Quad Port Power-over-Ethernet PSE Controller. + + Datasheets: + https://www.ti.com/lit/gpn/tps23861 + + +properties: + compatible: + enum: + - ti,tps23861 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: The value of current sense resistor in microohms. + default: 255000 + minimum: 250000 + maximum: 255000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tps23861@30 { + compatible = "ti,tps23861"; + reg = <0x30>; + shunt-resistor-micro-ohms = <255000>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt new file mode 100644 index 000000000..4a4df4ffc --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt @@ -0,0 +1,23 @@ +Versatile Express hwmon sensors +------------------------------- + +Requires node properties: +- "compatible" value : one of + "arm,vexpress-volt" + "arm,vexpress-amp" + "arm,vexpress-temp" + "arm,vexpress-power" + "arm,vexpress-energy" +- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml + for more details) + +Optional node properties: +- label : string describing the monitored value + +Example: + energy@0 { + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>; + label = "A15 Jcore"; + }; diff --git a/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml new file mode 100644 index 000000000..31ce77a4b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/winbond,w83781d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Winbond W83781 and compatible hardware monitor IC + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + enum: + - winbond,w83781d + - winbond,w83781g + - winbond,w83782d + - winbond,w83783s + - asus,as99127f + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@28 { + compatible = "winbond,w83781d"; + reg = <0x28>; + }; + }; |