diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/accel')
20 files changed, 1454 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml new file mode 100644 index 000000000..b6ba7ad1a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adis16201.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADIS16201 Dual Axis Inclinometer and similar + +maintainers: + - Jonathan Cameron <Jonathan.Cameron@huawei.com> + +description: | + Two similar parts from external interface point of view. + SPI interface. + https://www.analog.com/en/products/adis16201.html + https://www.analog.com/en/products/adis16209.html + +properties: + compatible: + enum: + - adi,adis16201 + - adi,adis16209 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adis16201"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml new file mode 100644 index 000000000..5887021cc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADIS16240 Programmable Impact Sensor and Recorder driver + +maintainers: + - Alexandru Tachici <alexandru.tachici@analog.com> + +description: | + ADIS16240 Programmable Impact Sensor and Recorder driver that supports + SPI interface. + https://www.analog.com/en/products/adis16240.html + +properties: + compatible: + enum: + - adi,adis16240 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adis16240"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml new file mode 100644 index 000000000..0c5b64cae --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers + +maintainers: + - Lucas Stankus <lucas.p.stankus@gmail.com> + +description: | + Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that + support both I2C & SPI interfaces. + https://www.analog.com/en/products/adxl312.html + https://www.analog.com/en/products/adxl313.html + https://www.analog.com/en/products/adxl314.html + +properties: + compatible: + enum: + - adi,adxl312 + - adi,adxl313 + - adi,adxl314 + + reg: + maxItems: 1 + + spi-3wire: true + + vs-supply: + description: Regulator that supplies power to the accelerometer + + vdd-supply: + description: Regulator that supplies the digital interface supply voltage + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@53 { + compatible = "adi,adxl313"; + reg = <0x53>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adxl313"; + reg = <0>; + spi-max-frequency = <5000000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml new file mode 100644 index 000000000..07cacc3f6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl345.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports + both I2C & SPI interfaces. + https://www.analog.com/en/products/mems/accelerometers/adxl345.html + https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html + +properties: + compatible: + oneOf: + - items: + - const: adi,adxl346 + - const: adi,adxl345 + - enum: + - adi,adxl345 + - adi,adxl375 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@2a { + compatible = "adi,adxl345"; + reg = <0x2a>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adxl345"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml new file mode 100644 index 000000000..c07261c71 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers + +maintainers: + - Puranjay Mohan <puranjay12@gmail.com> + +description: | + Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that + support both I2C & SPI interfaces + https://www.analog.com/en/products/adxl355.html + https://www.analog.com/en/products/adxl359.html + +properties: + compatible: + enum: + - adi,adxl355 + - adi,adxl359 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 3 + description: | + Type for DRDY should be IRQ_TYPE_EDGE_RISING. + Three configurable interrupt lines exist. + + interrupt-names: + description: Specify which interrupt line is in use. + items: + enum: + - INT1 + - INT2 + - DRDY + minItems: 1 + maxItems: 3 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@1d { + compatible = "adi,adxl355"; + reg = <0x1d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl355"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml new file mode 100644 index 000000000..f10d98d34 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL367 3-Axis Digital Accelerometer + +maintainers: + - Cosmin Tanislav <cosmin.tanislav@analog.com> + +description: | + The ADXL367 is an ultralow power, 3-axis MEMS accelerometer. + + The ADXL367 does not alias input signals by to achieve ultralow power + consumption, it samples the full bandwidth of the sensor at all + data rates. Measurement ranges of +-2g, +-4g, and +-8g are available, + with a resolution of 0.25mg/LSB on the +-2 g range. + + In addition to its ultralow power consumption, the ADXL367 + has many features to enable true system level power reduction. + It includes a deep multimode output FIFO, a built-in micropower + temperature sensor, and an internal ADC for synchronous conversion + of an additional analog input. + https://www.analog.com/en/products/adxl367.html + +properties: + compatible: + enum: + - adi,adxl367 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + vddio-supply: true + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@53 { + compatible = "adi,adxl367"; + reg = <0x53>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl367"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml new file mode 100644 index 000000000..62465e36a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl372.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer + +maintainers: + - Stefan Popa <stefan.popa@analog.com> + +description: | + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports + both I2C & SPI interfaces + https://www.analog.com/en/products/adxl372.html + +properties: + compatible: + enum: + - adi,adxl372 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@53 { + compatible = "adi,adxl372"; + reg = <0x53>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl372"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml new file mode 100644 index 000000000..ec643de03 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bma220.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMA220 Trixial Acceleration Sensor + +maintainers: + - Jonathan Cameron <Jonathan.Cameron@huawei.com> + +properties: + compatible: + enum: + - bosch,bma220 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdda-supply: true + vddd-supply: true + vddio-supply: true + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "bosch,bma220"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml new file mode 100644 index 000000000..457a709b5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bma255.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMA255 and Similar Accelerometers + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Stephan Gerhold <stephan@gerhold.net> + +description: + 3 axis accelerometers with varying range and I2C or SPI + 4-wire interface. + +properties: + compatible: + enum: + # bmc150-accel driver in Linux + - bosch,bma222 + - bosch,bma222e + - bosch,bma250e + - bosch,bma253 + - bosch,bma254 + - bosch,bma255 + - bosch,bma280 + - bosch,bmc150_accel + - bosch,bmc156_accel + - bosch,bmi055_accel + + # bma180 driver in Linux + - bosch,bma023 + - bosch,bma150 + - bosch,bma180 + - bosch,bma250 + - bosch,smb380 + + reg: + maxItems: 1 + + vdd-supply: true + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + description: | + Without interrupt-names, the first interrupt listed must be the one + connected to the INT1 pin, the second (optional) interrupt listed must be + the one connected to the INT2 pin (if available). The type should be + IRQ_TYPE_EDGE_RISING. + + BMC156 does not have an INT1 pin, therefore the first interrupt pin is + always treated as INT2. + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + + spi-max-frequency: + maximum: 10000000 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@8 { + compatible = "bosch,bma222"; + reg = <0x08>; + vddio-supply = <&vddio>; + vdd-supply = <&vdd>; + interrupts = <57 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@10 { + compatible = "bosch,bmc156_accel"; + reg = <0x10>; + vddio-supply = <&vddio>; + vdd-supply = <&vdd>; + interrupts = <116 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; + }; + }; + - | + # include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + accel@0 { + compatible = "bosch,bma222"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file mode 100644 index 000000000..8723a3362 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMA400 triaxial acceleration sensor + +maintainers: + - Dan Robertson <dan@dlrobertson.com> + +description: | + Acceleration and temperature iio sensors with an i2c interface + + Specifications about the sensor can be found at: + https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf + +properties: + compatible: + enum: + - bosch,bma400 + + reg: + maxItems: 1 + + vdd-supply: + description: phandle to the regulator that provides power to the accelerometer + + vddio-supply: + description: phandle to the regulator that provides power to the sensor's IO + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@14 { + compatible = "bosch,bma400"; + reg = <0x14>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml new file mode 100644 index 000000000..3cb82576d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMI088 IMU accelerometer part + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +description: | + Acceleration part of the IMU sensor with an SPI interface + Specifications about the sensor can be found at: + https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf + +properties: + compatible: + enum: + - bosch,bmi085-accel + - bosch,bmi088-accel + - bosch,bmi090l-accel + + reg: + maxItems: 1 + + vdd-supply: true + + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + description: | + Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW. + Two configurable interrupt lines exist. + + interrupt-names: + description: Specify which interrupt line is in use. + items: + enum: + - INT1 + - INT2 + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + bmi088-accel@1 { + compatible = "bosch,bmi088-accel"; + reg = <1>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio6>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml new file mode 100644 index 000000000..cb31e75ba --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/fsl,mma7455.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MMA7455 and MMA7456 three axis accelerometers + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: + Devices support both SPI and I2C interfaces. + +properties: + compatible: + enum: + - fsl,mma7455 + - fsl,mma7456 + reg: + maxItems: 1 + + avdd-supply: true + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + description: + Data ready is only available on INT1, but events can use either or + both pins. If not specified, first element assumed to correspond + to INT1 and second (where present) to INT2. + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + # include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@18 { + compatible = "fsl,mma7455"; + reg = <0x18>; + vddio-supply = <&iovdd>; + avdd-supply = <&avdd>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>, <58 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT2", "INT1"; + }; + }; + - | + # include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@0 { + compatible = "fsl,mma7456"; + reg = <0>; + spi-max-frequency = <10000000>; + vddio-supply = <&iovdd>; + avdd-supply = <&avdd>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT1"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml new file mode 100644 index 000000000..b0dd2b4e1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/fsl,mma8452.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q + triaxial accelerometer + +maintainers: + - Martin Kepplinger <martin.kepplinger@theobroma-systems.com> + +properties: + compatible: + enum: + - fsl,mma8451 + - fsl,mma8452 + - fsl,mma8453 + - fsl,mma8652 + - fsl,mma8653 + - fsl,fxls8471 + + reg: + maxItems: 1 + + interrupts: + description: + 2 highly configurable interrupt lines exist. + minItems: 1 + maxItems: 2 + + interrupt-names: + description: Specify which interrupt line is in use. + items: + enum: + - INT1 + - INT2 + minItems: 1 + maxItems: 2 + + vdd-supply: true + vddio-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accel@1d { + compatible = "fsl,mma8453"; + reg = <0x1d>; + interrupt-parent = <&gpio1>; + interrupts = <5 0>; + interrupt-names = "INT2"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml new file mode 100644 index 000000000..986df1a6f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM/Kionix KX022A Accelerometer + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges, + output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering. + KX022A can be accessed either via I2C or SPI. + +properties: + compatible: + const: kionix,kx022a + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [INT1, INT2] + - const: INT2 + + vdd-supply: true + io-vdd-supply: true + + mount-matrix: + description: | + an optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accel@1f { + compatible = "kionix,kx022a"; + reg = <0x1f>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + + io-vdd-supply = <&iovdd>; + vdd-supply = <&vdd>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml new file mode 100644 index 000000000..6ddb03f61 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/kionix,kxcjk1013.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kionix KXCJK-1013 Accelerometer + +maintainers: + - Robert Yang <decatf@gmail.com> + +properties: + compatible: + enum: + - kionix,kxcjk1013 + - kionix,kxcj91008 + - kionix,kxtj21009 + - kionix,kxtf9 + - kionix,kx023-1025 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + vddio-supply: true + + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accel@f { + compatible = "kionix,kxtf9"; + reg = <0xf>; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml new file mode 100644 index 000000000..f64d99b35 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/kionix,kxsd9.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kionix KXSD9 Accelerometer + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + 3 axis 12 bit accelerometer with +-8G range on all axes. Also has a + 12 bit auxiliary ADC channel. Interface is either SPI or I2C. + +properties: + compatible: + const: kionix,kxsd9 + + reg: + maxItems: 1 + + vdd-supply: true + iovdd-supply: true + + interrupts: + maxItems: 1 + + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + # include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accel@18 { + compatible = "kionix,kxsd9"; + reg = <0x18>; + iovdd-supply = <&iovdd>; + vdd-supply = <&vdd>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + mount-matrix = "-0.984807753012208", "0", "-0.173648177666930", + "0", "-1", "0", + "-0.173648177666930", "0", "0.984807753012208"; + }; + }; + - | + # include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + accel@0 { + compatible = "kionix,kxsd9"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt new file mode 100644 index 000000000..764e28ec1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt @@ -0,0 +1,119 @@ +LIS302 accelerometer devicetree bindings + +This device is matched via its bus drivers, and has a number of properties +that apply in on the generic device (independent from the bus). + + +Required properties for the SPI bindings: + - compatible: should be set to "st,lis3lv02d-spi" + - reg: the chipselect index + - spi-max-frequency: maximal bus speed, should be set to 1000000 unless + constrained by external circuitry + - interrupts: the interrupt generated by the device + +Required properties for the I2C bindings: + - compatible: should be set to "st,lis3lv02d" + - reg: i2c slave address + - Vdd-supply: The input supply for Vdd + - Vdd_IO-supply: The input supply for Vdd_IO + + +Optional properties for all bus drivers: + + - st,click-single-{x,y,z}: if present, tells the device to issue an + interrupt on single click events on the + x/y/z axis. + - st,click-double-{x,y,z}: if present, tells the device to issue an + interrupt on double click events on the + x/y/z axis. + - st,click-thresh-{x,y,z}: set the x/y/z axis threshold + - st,click-click-time-limit: click time limit, from 0 to 127.5msec + with step of 0.5 msec + - st,click-latency: click latency, from 0 to 255 msec with + step of 1 msec. + - st,click-window: click window, from 0 to 255 msec with + step of 1 msec. + - st,irq{1,2}-disable: disable IRQ 1/2 + - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition + - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition + - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition + - st,irq{1,2}-click: raise IRQ 1/2 on click condition + - st,irq-open-drain: consider IRQ lines open-drain + - st,irq-active-low: make IRQ lines active low + - st,wu-duration-1: duration register for Free-Fall/Wake-Up + interrupt 1 + - st,wu-duration-2: duration register for Free-Fall/Wake-Up + interrupt 2 + - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit + - st,wakeup-threshold: set wakeup threshold + - st,wakeup2-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit for second wakeup + engine. + - st,wakeup2-threshold: set wakeup threshold for second wakeup + engine. + - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of + highpass cut-off frequency + - st,hipass{1,2}-disable: disable highpass 1/2. + - st,default-rate=: set the default rate + - st,axis-{x,y,z}=: set the axis to map to the three coordinates. + Negative values can be used for inverted axis. + - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis + (used by self-test) + + +Example for a SPI device node: + + accelerometer@0 { + compatible = "st,lis302dl-spi"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <104 0>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + }; + +Example for a I2C device node: + + lis331dlh: accelerometer@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml new file mode 100644 index 000000000..d530ec041 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MEMSensing digital 3-Axis accelerometer + +maintainers: + - Dmitry Rokosov <ddrokosov@sberdevices.ru> + +description: | + MSA311 is a tri-axial, low-g accelerometer with I2C digital output for + sensitivity consumer applications. It has dynamical user selectable full + scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements + with output data rates from 1Hz to 1000Hz. + Datasheet can be found at following URL + https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf + +properties: + compatible: + const: memsensing,msa311 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@62 { + compatible = "memsensing,msa311"; + reg = <0x62>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&vcc_5v>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml new file mode 100644 index 000000000..00c990caa --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/murata,sca3300.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Murata SCA3300 Accelerometer + +description: | + 3-axis industrial accelerometer with digital SPI interface + https://www.murata.com/en-global/products/sensor/accel/sca3300 + +maintainers: + - Tomas Melin <tomas.melin@vaisala.com> + +properties: + compatible: + enum: + - murata,sca3300 + - murata,scl3300 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 8000000 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@0 { + compatible = "murata,sca3300"; + reg = <0x0>; + spi-max-frequency = <4000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml new file mode 100644 index 000000000..783c7ddfc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver + +maintainers: + - Sean Nyekjaer <sean@geanix.com> + +description: | + NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports + SPI and I2C interface. + https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf + https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf + +properties: + compatible: + enum: + - nxp,fxls8962af + - nxp,fxls8964af + + reg: + maxItems: 1 + + vdd-supply: + description: phandle to the regulator that provides power to the accelerometer + + interrupts: + maxItems: 1 + + interrupt-names: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@62 { + compatible = "nxp,fxls8962af"; + reg = <0x62>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "nxp,fxls8962af"; + reg = <0>; + spi-max-frequency = <4000000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + }; |