diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio')
11 files changed, 527 insertions, 13 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml index 986df1a6ff..66ea894dbe 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml @@ -4,19 +4,23 @@ $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM/Kionix KX022A Accelerometer +title: ROHM/Kionix KX022A, KX132-1211 and KX132ACR-LBZ Accelerometers maintainers: - Matti Vaittinen <mazziesaccount@gmail.com> description: | - KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges, - output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering. - KX022A can be accessed either via I2C or SPI. + KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting + +/- 2G, 4G, 8G and 16G ranges, variable output data-rates and a + hardware-fifo buffering. These accelerometers can be accessed either + via I2C or SPI. properties: compatible: - const: kionix,kx022a + enum: + - kionix,kx022a + - kionix,kx132-1211 + - rohm,kx132acr-lbz reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml index 875f394576..5cc6a96840 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -4,21 +4,31 @@ $id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Linear Technology / Analog Devices LTC2497 ADC +title: Linear Technology / Analog Devices LTC2497 and LTC2309 ADC maintainers: - Michael Hennerich <michael.hennerich@analog.com> + - Liam Beguin <liambeguin@gmail.com> description: | - 16bit ADC supporting up to 16 single ended or 8 differential inputs. - I2C interface. + LTC2309: + low noise, low power, 8-channel, 12-bit successive approximation ADC with an + I2C compatible serial interface. - https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf - https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf + + LTC2497: + LTC2499: + 16bit ADC supporting up to 16 single ended or 8 differential inputs. + I2C interface. + + https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf properties: compatible: enum: + - lltc,ltc2309 - lltc,ltc2497 - lltc,ltc2499 diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml new file mode 100644 index 0000000000..6753192761 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP346X and MCP356X ADC Family + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit + Delta-Sigma ADCs with an SPI interface. Datasheet can be found here: + Datasheet for MCP3561, MCP3562, MCP3564 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf + Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf + Datasheet for MCP3461, MCP3462, MCP3464 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf + Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf + +properties: + compatible: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3461r + - microchip,mcp3462r + - microchip,mcp3464r + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + - microchip,mcp3561r + - microchip,mcp3562r + - microchip,mcp3564r + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + spi-cpha: true + + spi-cpol: true + + vdd-supply: true + + avdd-supply: true + + clocks: + description: + Phandle and clock identifier for external sampling clock. + If not specified, the internal crystal oscillator will be used. + maxItems: 1 + + interrupts: + description: IRQ line of the ADC + maxItems: 1 + + drive-open-drain: + description: + Whether to drive the IRQ signal as push-pull (default) or open-drain. Note + that the device requires this pin to become "high", otherwise it will stop + converting. + type: boolean + + vref-supply: + description: + Some devices have a specific reference voltage supplied on a different + pin to the other supplies. Needed to be able to establish channel scaling + unless there is also an internal reference available (e.g. mcp3564r). In + case of "r" devices (e. g. mcp3564r), if it does not exists the internal + reference will be used. + + microchip,hw-device-address: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + description: + The address is set on a per-device basis by fuses in the factory, + configured on request. If not requested, the fuses are set for 0x1. + The device address is part of the device markings to avoid + potential confusion. This address is coded on two bits, so four possible + addresses are available when multiple devices are present on the same + SPI bus with only one Chip Select line for all devices. + Each device communication starts by a CS falling edge, followed by the + clocking of the device address (BITS[7:6] - top two bits of COMMAND BYTE + which is first one on the wire). + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@([0-9]|([1-7][0-9]))$": + $ref: adc.yaml + type: object + unevaluatedProperties: false + description: Represents the external channels which are connected to the ADC. + + properties: + reg: + description: The channel number in single-ended and differential mode. + minimum: 0 + maximum: 79 + + required: + - reg + +dependencies: + spi-cpol: [ spi-cpha ] + spi-cpha: [ spi-cpol ] + +required: + - compatible + - reg + - microchip,hw-device-address + - spi-max-frequency + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - # External vref, no internal reference + if: + properties: + compatible: + contains: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + then: + required: + - vref-supply + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3564r"; + reg = <0>; + vref-supply = <&vref_reg>; + spi-cpha; + spi-cpol; + spi-max-frequency = <10000000>; + microchip,hw-device-address = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + /* CH0 to AGND */ + reg = <0>; + label = "CH0"; + }; + + channel@1 { + /* CH1 to AGND */ + reg = <1>; + label = "CH1"; + }; + + /* diff-channels */ + channel@11 { + reg = <11>; + + /* CN0, CN1 */ + diff-channels = <0 1>; + label = "CH0_CH1"; + }; + + channel@22 { + reg = <0x22>; + + /* CN1, CN2 */ + diff-channels = <1 2>; + label = "CH1_CH3"; + }; + + channel@23 { + reg = <0x23>; + + /* CN1, CN3 */ + diff-channels = <1 3>; + label = "CH1_CH3"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index f7b3fde411..06951ec5f5 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -18,7 +18,13 @@ description: | properties: compatible: enum: + - microchip,mcp3910 - microchip,mcp3911 + - microchip,mcp3912 + - microchip,mcp3913 + - microchip,mcp3914 + - microchip,mcp3918 + - microchip,mcp3919 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index e004659099..d605999ffe 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -23,6 +23,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml new file mode 100644 index 0000000000..e779a8986e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,twl6030-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPADC subsystem in the TWL6030 power module + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: + The GPADC subsystem in the TWL603X consists of a 10-bit ADC + combined with a 15-input analog multiplexer in the TWL6030 resp. a + 19-input analog muliplexer in the TWL6032. + +properties: + compatible: + enum: + - ti,twl6030-gpadc + - ti,twl6032-gpadc + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + gpadc { + compatible = "ti,twl6030-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 9fda56fa49..2ee6080dea 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -4,20 +4,26 @@ $id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: HMC425A 6-bit Digital Step Attenuator +title: Analog Devices HMC425A and similar Digital Step Attenuators maintainers: - Michael Hennerich <michael.hennerich@analog.com> description: | - Digital Step Attenuator IIO device with gpio interface. + Digital Step Attenuator IIO devices with gpio interface. + Offer various frequency and attenuation ranges. HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz - https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + + HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf + properties: compatible: enum: - adi,hmc425a + - adi,hmc540s vcc-supply: true diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 1db6952ddc..297b8a1a7f 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -48,6 +48,11 @@ properties: mount-matrix: true + invensense,level-shifter: + type: boolean + description: | + From ancient platform data struct: false: VLogic, true: VDD + i2c-gate: $ref: /schemas/i2c/i2c-controller.yaml unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index ee8724ad33..28b667a9cb 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -93,6 +93,9 @@ properties: wakeup-source: $ref: /schemas/types.yaml#/definitions/flag + mount-matrix: + description: an optional 3x3 mounting rotation matrix + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml new file mode 100644 index 0000000000..7c4ca6322b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/rohm,bm1390.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BM1390 pressure sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: + BM1390GLV-Z is a pressure sensor which performs internal temperature + compensation for the MEMS. Pressure range is from 300 hPa to 1300 hPa + and sample averaging and IIR filtering is built in. Temperature + measurement is also supported. + +properties: + compatible: + const: rohm,bm1390glv-z + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure-sensor@5d { + compatible = "rohm,bm1390glv-z"; + reg = <0x5d>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vdd>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml new file mode 100644 index 0000000000..8980b3cd83 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/resolver/adi,ad2s1210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD2S1210 Resolver-to-Digital Converter + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The AD2S1210 is a complete 10-bit to 16-bit resolution tracking + resolver-to-digital converter, integrating an on-board programmable + sinusoidal oscillator that provides sine wave excitation for + resolvers. + + The AD2S1210 allows the user to read the angular position or the + angular velocity data directly from the parallel outputs or through + the serial interface. + + The mode of operation of the communication channel (parallel or serial) is + selected by the A0 and A1 input pins. In normal mode, data is latched by + toggling the SAMPLE line and can then be read directly. In configuration mode, + data is read or written using a register access scheme (address byte with + read/write flag and data byte). + + A1 A0 Result + 0 0 Normal mode - position output + 0 1 Normal mode - velocity output + 1 0 Reserved + 1 1 Configuration mode + + In normal mode, the resolution of the digital output is selected using + the RES0 and RES1 input pins. In configuration mode, the resolution is + selected by setting the RES0 and RES1 bits in the control register. + + RES1 RES0 Resolution (Bits) + 0 0 10 + 0 1 12 + 1 0 14 + 1 1 16 + + Note on SPI connections: The CS line on the AD2S1210 should hard-wired to + logic low and the WR/FSYNC line on the AD2S1210 should be connected to the + SPI CSn output of the SPI controller. + + Datasheet: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf + +properties: + compatible: + const: adi,ad2s1210 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 25000000 + + spi-cpha: true + + avdd-supply: + description: + A 4.75 to 5.25 V regulator that powers the Analog Supply Voltage (AVDD) + pin. + + dvdd-supply: + description: + A 4.75 to 5.25 V regulator that powers the Digital Supply Voltage (DVDD) + pin. + + vdrive-supply: + description: + A 2.3 to 5.25 V regulator that powers the Logic Power Supply Input + (VDrive) pin. + + clocks: + maxItems: 1 + description: External oscillator clock (CLKIN). + + reset-gpios: + description: + GPIO connected to the /RESET pin. As the line needs to be low for the + reset to be active, it should be configured as GPIO_ACTIVE_LOW. + maxItems: 1 + + sample-gpios: + description: + GPIO connected to the /SAMPLE pin. As the line needs to be low to trigger + a sample, it should be configured as GPIO_ACTIVE_LOW. + maxItems: 1 + + mode-gpios: + description: + GPIO lines connected to the A0 and A1 pins. These pins select the data + transfer mode. + minItems: 2 + maxItems: 2 + + resolution-gpios: + description: + GPIO lines connected to the RES0 and RES1 pins. These pins select the + resolution of the digital output. If omitted, it is assumed that the + RES0 and RES1 pins are hard-wired to match the assigned-resolution-bits + property. + minItems: 2 + maxItems: 2 + + fault-gpios: + description: + GPIO lines connected to the LOT and DOS pins. These pins combined indicate + the type of fault present, if any. As these pins a pulled low to indicate + a fault condition, they should be configured as GPIO_ACTIVE_LOW. + minItems: 2 + maxItems: 2 + + adi,fixed-mode: + description: + This is used to indicate the selected mode if A0 and A1 are hard-wired + instead of connected to GPIOS (i.e. mode-gpios is omitted). + $ref: /schemas/types.yaml#/definitions/string + enum: [config, velocity, position] + + assigned-resolution-bits: + description: + Resolution of the digital output required by the application. This + determines the precision of the angle and/or the maximum speed that can + be measured. If resolution-gpios is omitted, it is assumed that RES0 and + RES1 are hard-wired to match this value. + enum: [10, 12, 14, 16] + +required: + - compatible + - reg + - spi-cpha + - avdd-supply + - dvdd-supply + - vdrive-supply + - clocks + - sample-gpios + - assigned-resolution-bits + +oneOf: + - required: + - mode-gpios + - required: + - adi,fixed-mode + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + resolver@0 { + compatible = "adi,ad2s1210"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + avdd-supply = <&avdd_regulator>; + dvdd-supply = <&dvdd_regulator>; + vdrive-supply = <&vdrive_regulator>; + clocks = <&ext_osc>; + sample-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>; + mode-gpios = <&gpio0 86 0>, <&gpio0 87 0>; + resolution-gpios = <&gpio0 88 0>, <&gpio0 89 0>; + assigned-resolution-bits = <16>; + }; + }; |