summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt')
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt36
1 files changed, 36 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
new file mode 100644
index 000000000..0beafed50
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
@@ -0,0 +1,36 @@
+Marvell SEI (System Error Interrupt) Controller
+-----------------------------------------------
+
+Marvell SEI (System Error Interrupt) controller is an interrupt
+aggregator. It receives interrupts from several sources and aggregates
+them to a single interrupt line (an SPI) on the parent interrupt
+controller.
+
+This interrupt controller can handle up to 64 SEIs, a set comes from the
+AP and is wired while a second set comes from the CPs by the mean of
+MSIs.
+
+Required properties:
+
+- compatible: should be one of:
+ * "marvell,ap806-sei"
+- reg: SEI registers location and length.
+- interrupts: identifies the parent IRQ that will be triggered.
+- #interrupt-cells: number of cells to define an SEI wired interrupt
+ coming from the AP, should be 1. The cell is the IRQ
+ number.
+- interrupt-controller: identifies the node as an interrupt controller
+ for AP interrupts.
+- msi-controller: identifies the node as an MSI controller for the CPs
+ interrupts.
+
+Example:
+
+ sei: interrupt-controller@3f0200 {
+ compatible = "marvell,ap806-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };