summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/media/i2c/ov7670.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c/ov7670.txt')
-rw-r--r--Documentation/devicetree/bindings/media/i2c/ov7670.txt55
1 files changed, 55 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7670.txt b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
new file mode 100644
index 000000000..2c972a56f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
@@ -0,0 +1,55 @@
+* Omnivision OV7670 CMOS sensor
+
+The Omnivision OV7670 sensor supports multiple resolutions output, such as
+CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB
+output formats.
+
+Required Properties:
+- compatible: should be "ovti,ov7670"
+- clocks: reference to the xclk input clock.
+- clock-names: should be "xclk".
+
+Required Endpoint Properties:
+- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+
+Optional Properties:
+- reset-gpios: reference to the GPIO connected to the resetb pin, if any.
+ Active is low.
+- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
+ Active is high.
+- ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output
+ signal during horizontal blankings.
+
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+ i2c1: i2c@f0018000 {
+ ov7670: camera@21 {
+ compatible = "ovti,ov7670";
+ reg = <0x21>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+ reset-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+ clocks = <&pck0>;
+ clock-names = "xclk";
+ assigned-clocks = <&pck0>;
+ assigned-clock-rates = <25000000>;
+
+ ov7670,pclk-hb-disable;
+
+ port {
+ ov7670_0: endpoint {
+ hsync-active = <0>;
+ vsync-active = <0>;
+
+ remote-endpoint = <&isi_0>;
+ };
+ };
+ };
+ };