1 files changed, 0 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
deleted file mode 100644
index e3289634fa..0000000000
--- a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Xilinx SDFEC(16nm) IP *
-
-The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
-which provides high-throughput LDPC and Turbo Code implementations.
-The LDPC decode & encode functionality is capable of covering a range of
-customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
-principally covers codes used by LTE. The FEC Engine offers significant
-power and area savings versus implementations done in the FPGA fabric.
-
-
-Required properties:
-- compatible: Must be "xlnx,sd-fec-1.1"
-- clock-names : List of input clock names from the following:
-    - "core_clk", Main processing clock for processing core (required)
-    - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
-    - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
-    - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
-    - "s_axis_ctrl_aclk",  Control input AXI4-Stream Slave interface clock (optional)
-    - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
-    - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
-    - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
-- clocks : Clock phandles (see clock_bindings.txt for details).
-- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
-  location and length.
-- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
-  being used.
-- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DIN_WORDS to be block based, while a value of 2 configures the
-  DIN_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DOUT_WORDS to be block based, while a value of 2 configures the
-  DOUT_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-Optional properties:
-- interrupts: should contain SDFEC interrupt number
-
-Example
----------------------------------------
-	sd_fec_0: sd-fec@a0040000 {
-		compatible = "xlnx,sd-fec-1.1";
-		clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
-		clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
-		reg = <0x0 0xa0040000 0x0 0x40000>;
-		interrupt-parent = <&axi_intc>;
-		interrupts = <1 0>;
-		xlnx,sdfec-code = "ldpc";
-		xlnx,sdfec-din-words = <0>;
-		xlnx,sdfec-din-width = <2>;
-		xlnx,sdfec-dout-words = <0>;
-		xlnx,sdfec-dout-width = <1>;
-	};