diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml | 44 |
1 files changed, 39 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml index f57e96374e..064e840aea 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml @@ -9,6 +9,7 @@ title: Broadcom STB NAND Controller maintainers: - Brian Norris <computersforpeace@gmail.com> - Kamal Dasu <kdasu.kdev@gmail.com> + - William Zhang <william.zhang@broadcom.com> description: | The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND @@ -18,9 +19,10 @@ description: | supports basic PROGRAM and READ functions, among other features. This controller was originally designed for STB SoCs (BCM7xxx) but is now - available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and - iProc/Cygnus. Its history includes several similar (but not fully register - compatible) versions. + available on a variety of Broadcom SoCs, including some BCM3xxx, MIPS based + Broadband SoC (BCM63xx), ARM based Broadband SoC (BCMBCA) and iProc/Cygnus. + Its history includes several similar (but not fully register compatible) + versions. -- Additional SoC-specific NAND controller properties -- @@ -53,7 +55,7 @@ properties: - brcm,brcmnand-v7.2 - brcm,brcmnand-v7.3 - const: brcm,brcmnand - - description: BCM63138 SoC-specific NAND controller + - description: BCMBCA SoC-specific NAND controller items: - const: brcm,nand-bcm63138 - enum: @@ -111,6 +113,13 @@ properties: earlier versions of this core that include WP type: boolean + brcm,wp-not-connected: + description: + Use this property when WP pin is not physically wired to the NAND chip. + Write protection feature cannot be used. By default, controller assumes + the pin is connected and feature is used. + $ref: /schemas/types.yaml#/definitions/flag + patternProperties: "^nand@[a-f0-9]$": type: object @@ -137,6 +146,15 @@ patternProperties: layout. $ref: /schemas/types.yaml#/definitions/uint32 + brcm,nand-ecc-use-strap: + description: + This property requires the host system to get the ECC related + settings from the SoC NAND boot strap configuration instead of + the generic NAND ECC settings. This is a common hardware design + on BCMBCA based boards. This strap ECC option and generic NAND + ECC option can not be specified at the same time. + $ref: /schemas/types.yaml#/definitions/flag + unevaluatedProperties: false allOf: @@ -177,6 +195,8 @@ allOf: - const: iproc-idm - const: iproc-ext - if: + required: + - interrupts properties: interrupts: minItems: 2 @@ -184,12 +204,26 @@ allOf: required: - interrupt-names + - if: + patternProperties: + "^nand@[a-f0-9]$": + required: + - brcm,nand-ecc-use-strap + then: + patternProperties: + "^nand@[a-f0-9]$": + properties: + nand-ecc-strength: false + nand-ecc-step-size: false + nand-ecc-maximize: false + nand-ecc-algo: false + brcm,nand-oob-sector-size: false + unevaluatedProperties: false required: - reg - reg-names - - interrupts examples: - | |