summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt')
-rw-r--r--Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt69
1 files changed, 69 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
new file mode 100644
index 000000000..5f0cf6c2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
@@ -0,0 +1,69 @@
+HiSilicon STB PCIe host bridge DT description
+
+The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core.
+It shares common functions with the DesignWare PCIe core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+Additional properties are described here:
+
+Required properties
+- compatible: Should be one of the following strings:
+ "hisilicon,hi3798cv200-pcie"
+- reg: Should contain sysctl, rc_dbi, config registers location and length.
+- reg-names: Must include the following entries:
+ "control": control registers of PCIe controller;
+ "rc-dbi": configuration space of PCIe controller;
+ "config": configuration transaction space of PCIe controller.
+- bus-range: PCI bus numbers covered.
+- interrupts: MSI interrupt.
+- interrupt-names: Must include "msi" entries.
+- clocks: List of phandle and clock specifier pairs as listed in clock-names
+ property.
+- clock-name: Must include the following entries:
+ "aux": auxiliary gate clock;
+ "pipe": pipe gate clock;
+ "sys": sys gate clock;
+ "bus": bus gate clock.
+- resets: List of phandle and reset specifier pairs as listed in reset-names
+ property.
+- reset-names: Must include the following entries:
+ "soft": soft reset;
+ "sys": sys reset;
+ "bus": bus reset.
+
+Optional properties:
+- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal.
+- vpcie-supply: The regulator in charge of PCIe port power.
+- phys: List of phandle and phy mode specifier, should be 0.
+- phy-names: Must be "phy".
+
+Example:
+ pcie@f9860000 {
+ compatible = "hisilicon,hi3798cv200-pcie";
+ reg = <0xf9860000 0x1000>,
+ <0xf0000000 0x2000>,
+ <0xf2000000 0x01000000>;
+ reg-names = "control", "rc-dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0 15>;
+ num-lanes = <1>;
+ ranges=<0x81000000 0 0 0xf4000000 0 0x00010000
+ 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg PCIE_AUX_CLK>,
+ <&crg PCIE_PIPE_CLK>,
+ <&crg PCIE_SYS_CLK>,
+ <&crg PCIE_BUS_CLK>;
+ clock-names = "aux", "pipe", "sys", "bus";
+ resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+ reset-names = "soft", "sys", "bus";
+ phys = <&combphy1 PHY_TYPE_PCIE>;
+ phy-names = "phy";
+ };