summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt')
-rw-r--r--Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt187
1 files changed, 187 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
new file mode 100644
index 000000000..ffba4f63d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -0,0 +1,187 @@
+* Mediatek/Ralink RT3883 PCI controller
+
+1) Main node
+
+ Required properties:
+
+ - compatible: must be "ralink,rt3883-pci"
+
+ - reg: specifies the physical base address of the controller and
+ the length of the memory mapped region.
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 1.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 1.
+
+ - ranges: specifies the translation between child address space and parent
+ address space
+
+ Optional properties:
+
+ - status: indicates the operational status of the device.
+ Value must be either "disabled" or "okay".
+
+2) Child nodes
+
+ The main node must have two child nodes which describes the built-in
+ interrupt controller and the PCI host bridge.
+
+ a) Interrupt controller:
+
+ Required properties:
+
+ - interrupt-controller: identifies the node as an interrupt controller
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0. As such, 'interrupt-map' nodes do not
+ have to specify a parent unit address.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+
+ b) PCI host bridge:
+
+ Required properties:
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 2.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - device_type: must be "pci"
+
+ - bus-range: PCI bus numbers covered
+
+ - ranges: specifies the ranges for the PCI memory and I/O regions
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ The PCI host bridge node might have additional sub-nodes representing
+ the onboard PCI devices/PCI slots. Each such sub-node must have the
+ following mandatory properties:
+
+ - reg: used only for interrupt mapping, so only the first four bytes
+ are used to refer to the correct bus number and device number.
+
+ - device_type: must be "pci"
+
+ If a given sub-node represents a PCI bridge it must have following
+ mandatory properties as well:
+
+ - #address-cells: must be set to <3>
+
+ - #size-cells: must set to <2>
+
+ - #interrupt-cells: must be set to <1>
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ Besides the required properties the sub-nodes may have these optional
+ properties:
+
+ - status: indicates the operational status of the sub-node.
+ Value must be either "disabled" or "okay".
+
+3) Example:
+
+ a) SoC specific dtsi file:
+
+ pci@10140000 {
+ compatible = "ralink,rt3883-pci";
+ reg = <0x10140000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges; /* direct mapping */
+
+ status = "disabled";
+
+ pciintc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ };
+
+ host-bridge {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ device_type = "pci";
+
+ bus-range = <0 255>;
+ ranges = <
+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+ >;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 17 */
+ 0x8800 0 0 1 &pciintc 18
+ 0x8800 0 0 2 &pciintc 18
+ 0x8800 0 0 3 &pciintc 18
+ 0x8800 0 0 4 &pciintc 18
+ /* IDSEL 18 */
+ 0x9000 0 0 1 &pciintc 19
+ 0x9000 0 0 2 &pciintc 19
+ 0x9000 0 0 3 &pciintc 19
+ 0x9000 0 0 4 &pciintc 19
+ >;
+
+ pci-bridge@1 {
+ reg = <0x0800 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ interrupt-map-mask = <0x0 0 0 0>;
+ interrupt-map = <0x0 0 0 0 &pciintc 20>;
+
+ status = "disabled";
+ };
+
+ pci-slot@17 {
+ reg = <0x8800 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+
+ pci-slot@18 {
+ reg = <0x9000 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+ };
+ };
+
+ b) Board specific dts file:
+
+ pci@10140000 {
+ status = "okay";
+
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
+ };
+ };
+ };