diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml new file mode 100644 index 0000000000..de6c10ba36 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml @@ -0,0 +1,217 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/xlnx,pinctrl-zynq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq Pinctrl + +maintainers: + - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> + +description: | + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + Zynq's pin configuration nodes act as a container for an arbitrary number of + subnodes. Each of these subnodes represents some desired configuration for a + pin, a group, or a list of pins or groups. This configuration can include the + mux function to select on those pin(s)/group(s), and various pin configuration + parameters, such as pull-up, slew rate, etc. + + Each configuration node can consist of multiple nodes describing the pinmux and + pinconf options. Those nodes can be pinmux nodes or pinconf nodes. + + The name of each subnode is not important; all subnodes should be enumerated + and processed purely based on their content. + +properties: + compatible: + const: xlnx,pinctrl-zynq + + reg: + description: Specifies the base address and size of the SLCR space. + maxItems: 1 + + syscon: + description: + phandle to the SLCR. + +patternProperties: + '^(.*-)?(default|gpio-grp)$': + type: object + patternProperties: + '^mux': + type: object + description: + Pinctrl node's client devices use subnodes for pin muxes, + which in turn use below standard properties. + $ref: pinmux-node.yaml# + + properties: + groups: + description: + List of groups to select (either this or "pins" must be + specified), available groups for this subnode. + items: + enum: [ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, + mdio1_0_grp, qspi0_0_grp, qspi1_0_grp, qspi_fbclk, + qspi_cs1_grp, spi0_0_grp, spi0_1_grp, spi0_2_grp, + spi0_0_ss0, spi0_0_ss1, spi0_0_ss2, spi0_1_ss0, + spi0_1_ss1, spi0_1_ss2, spi0_2_ss0, spi0_2_ss1, + spi0_2_ss2, spi1_0_grp, spi1_1_grp, spi1_2_grp, + spi1_3_grp, spi1_0_ss0, spi1_0_ss1, spi1_0_ss2, + spi1_1_ss0, spi1_1_ss1, spi1_1_ss2, spi1_2_ss0, + spi1_2_ss1, spi1_2_ss2, spi1_3_ss0, spi1_3_ss1, + spi1_3_ss2, sdio0_0_grp, sdio0_1_grp, sdio0_2_grp, + sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, sdio1_3_grp, + sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp, + sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, + smc0_nor_addr25_grp, smc0_nand, can0_0_grp, can0_1_grp, + can0_2_grp, can0_3_grp, can0_4_grp, can0_5_grp, + can0_6_grp, can0_7_grp, can0_8_grp, can0_9_grp, + can0_10_grp, can1_0_grp, can1_1_grp, can1_2_grp, + can1_3_grp, can1_4_grp, can1_5_grp, can1_6_grp, + can1_7_grp, can1_8_grp, can1_9_grp, can1_10_grp, + can1_11_grp, uart0_0_grp, uart0_1_grp, uart0_2_grp, + uart0_3_grp, uart0_4_grp, uart0_5_grp, uart0_6_grp, + uart0_7_grp, uart0_8_grp, uart0_9_grp, uart0_10_grp, + uart1_0_grp, uart1_1_grp, uart1_2_grp, uart1_3_grp, + uart1_4_grp, uart1_5_grp, uart1_6_grp, uart1_7_grp, + uart1_8_grp, uart1_9_grp, uart1_10_grp, uart1_11_grp, + i2c0_0_grp, i2c0_1_grp, i2c0_2_grp, i2c0_3_grp, + i2c0_4_grp, i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, + i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, i2c1_0_grp, + i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, i2c1_4_grp, + i2c1_5_grp, i2c1_6_grp, i2c1_7_grp, i2c1_8_grp, + i2c1_9_grp, i2c1_10_grp, ttc0_0_grp, ttc0_1_grp, + ttc0_2_grp, ttc1_0_grp, ttc1_1_grp, ttc1_2_grp, + swdt0_0_grp, swdt0_1_grp, swdt0_2_grp, swdt0_3_grp, + swdt0_4_grp, gpio0_0_grp, gpio0_1_grp, gpio0_2_grp, + gpio0_3_grp, gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, + gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, gpio0_10_grp, + gpio0_11_grp, gpio0_12_grp, gpio0_13_grp, gpio0_14_grp, + gpio0_15_grp, gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, + gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, gpio0_22_grp, + gpio0_23_grp, gpio0_24_grp, gpio0_25_grp, gpio0_26_grp, + gpio0_27_grp, gpio0_28_grp, gpio0_29_grp, gpio0_30_grp, + gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, gpio0_34_grp, + gpio0_35_grp, gpio0_36_grp, gpio0_37_grp, gpio0_38_grp, + gpio0_39_grp, gpio0_40_grp, gpio0_41_grp, gpio0_42_grp, + gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, gpio0_46_grp, + gpio0_47_grp, gpio0_48_grp, gpio0_49_grp, gpio0_50_grp, + gpio0_51_grp, gpio0_52_grp, gpio0_53_grp, usb0_0_grp, + usb1_0_grp] + maxItems: 54 + + function: + description: + Specify the alternative function to be configured for the + given pin groups. + enum: [ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, + qspi_cs1, spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, + sdio0_cd, sdio0_wp, sdio1, sdio1_pc, sdio1_cd, sdio1_wp, + smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, + can1, uart0, uart1, i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, + usb0, usb1] + + required: + - groups + - function + + additionalProperties: false + + '^conf': + type: object + description: + Pinctrl node's client devices use subnodes for pin configurations, + which in turn use the standard properties below. + $ref: pincfg-node.yaml# + + properties: + groups: + description: + List of pin groups as mentioned above. + + pins: + description: + List of pin names to select in this subnode. + items: + pattern: '^MIO([0-9]|[1-4][0-9]|5[0-3])$' + maxItems: 54 + + bias-pull-up: true + + bias-pull-down: true + + bias-disable: true + + bias-high-impedance: true + + low-power-enable: true + + low-power-disable: true + + slew-rate: + enum: [0, 1] + + power-source: + enum: [1, 2, 3, 4] + + oneOf: + - required: [ groups ] + - required: [ pins ] + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - syscon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-zynq.h> + pinctrl0: pinctrl@700 { + compatible = "xlnx,pinctrl-zynq"; + reg = <0x700 0x200>; + syscon = <&slcr>; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + }; + + uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; + }; + +... |