1 files changed, 0 insertions, 48 deletions
diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
deleted file mode 100644
index 79e10a05a9..0000000000
--- a/Documentation/devicetree/bindings/serial/maxim,max310x.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART)
-
-Required properties:
-- compatible: Should be one of the following:
-  - "maxim,max3107" for Maxim MAX3107,
-  - "maxim,max3108" for Maxim MAX3108,
-  - "maxim,max3109" for Maxim MAX3109,
-  - "maxim,max14830" for Maxim MAX14830.
-- reg: SPI chip select number.
-- interrupts: Specifies the interrupt source of the parent interrupt
-  controller. The format of the interrupt specifier depends on the
-  parent interrupt controller.
-- clocks: phandle to the IC source clock.
-- clock-names: Should be "xtal" if clock is an external crystal or
-  "osc" if an external clock source is used.
-
-Optional properties:
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be two. The first cell is the GPIO number and
-  the second cell is used to specify the GPIO polarity:
-    0 = active high,
-    1 = active low.
-
-Example:
-
-/ {
-	clocks {
-		spi_uart_clk: osc_max14830 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <3686400>;
-		};
-
-	};
-};
-
-&spi0 {
-	max14830: max14830@0 {
-		compatible = "maxim,max14830";
-		reg = <0>;
-		clocks = <&spi_uart_clk>;
-		clock-names = "osc";
-		interrupt-parent = <&gpio3>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};