summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/corsair-cpro.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/corsair-cpro.rst')
-rw-r--r--Documentation/hwmon/corsair-cpro.rst41
1 files changed, 41 insertions, 0 deletions
diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst
new file mode 100644
index 000000000..751f95476
--- /dev/null
+++ b/Documentation/hwmon/corsair-cpro.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver corsair-cpro
+==========================
+
+Supported devices:
+
+ * Corsair Commander Pro
+ * Corsair Commander Pro (1000D)
+
+Author: Marius Zachmann
+
+Description
+-----------
+
+This driver implements the sysfs interface for the Corsair Commander Pro.
+The Corsair Commander Pro is a USB device with 6 fan connectors,
+4 temperature sensor connectors and 2 Corsair LED connectors.
+It can read the voltage levels on the SATA power connector.
+
+Usage Notes
+-----------
+
+Since it is a USB device, hotswapping is possible. The device is autodetected.
+
+Sysfs entries
+-------------
+
+======================= =====================================================================
+in0_input Voltage on SATA 12v
+in1_input Voltage on SATA 5v
+in2_input Voltage on SATA 3.3v
+temp[1-4]_input Temperature on connected temperature sensors
+fan[1-6]_input Connected fan rpm.
+fan[1-6]_label Shows fan type as detected by the device.
+fan[1-6]_target Sets fan speed target rpm.
+ When reading, it reports the last value if it was set by the driver.
+ Otherwise returns an error.
+pwm[1-6] Sets the fan speed. Values from 0-255. Can only be read if pwm
+ was set directly.
+======================= =====================================================================