diff options
Diffstat (limited to 'Documentation/networking/device_drivers/wwan')
| -rw-r--r-- | Documentation/networking/device_drivers/wwan/t7xx.rst | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/networking/device_drivers/wwan/t7xx.rst b/Documentation/networking/device_drivers/wwan/t7xx.rst index dd5b731957..f346f5f85f 100644 --- a/Documentation/networking/device_drivers/wwan/t7xx.rst +++ b/Documentation/networking/device_drivers/wwan/t7xx.rst @@ -39,6 +39,34 @@ command and receive response: - open the AT control channel using a UART tool or a special user tool +Sysfs +===== +The driver provides sysfs interfaces to userspace. + +t7xx_mode +--------- +The sysfs interface provides userspace with access to the device mode, this interface +supports read and write operations. + +Device mode: + +- ``unknown`` represents that device in unknown status +- ``ready`` represents that device in ready status +- ``reset`` represents that device in reset status +- ``fastboot_switching`` represents that device in fastboot switching status +- ``fastboot_download`` represents that device in fastboot download status +- ``fastboot_dump`` represents that device in fastboot dump status + +Read from userspace to get the current device mode. + +:: + $ cat /sys/bus/pci/devices/${bdf}/t7xx_mode + +Write from userspace to set the device mode. + +:: + $ echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode + Management application development ================================== The driver and userspace interfaces are described below. The MBIM protocol is @@ -97,6 +125,20 @@ The driver exposes an AT port by implementing AT WWAN Port. The userspace end of the control port is a /dev/wwan0at0 character device. Application shall use this interface to issue AT commands. +fastboot port userspace ABI +--------------------------- + +/dev/wwan0fastboot0 character device +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver exposes a fastboot protocol interface by implementing +fastboot WWAN Port. The userspace end of the fastboot channel pipe is a +/dev/wwan0fastboot0 character device. Application shall use this interface for +fastboot protocol communication. + +Please note that driver needs to be reloaded to export /dev/wwan0fastboot0 +port, because device needs a cold reset after enter ``fastboot_switching`` +mode. + The MediaTek's T700 modem supports the 3GPP TS 27.007 [4] specification. References @@ -118,3 +160,7 @@ speak the Mobile Interface Broadband Model (MBIM) protocol"* [4] *Specification # 27.007 - 3GPP* - https://www.3gpp.org/DynaReport/27007.htm + +[5] *fastboot "a mechanism for communicating with bootloaders"* + +- https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.md |