summaryrefslogtreecommitdiffstats
path: root/Documentation/rust/testing.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/rust/testing.rst')
-rw-r--r--Documentation/rust/testing.rst135
1 files changed, 135 insertions, 0 deletions
diff --git a/Documentation/rust/testing.rst b/Documentation/rust/testing.rst
new file mode 100644
index 0000000000..6658998d1b
--- /dev/null
+++ b/Documentation/rust/testing.rst
@@ -0,0 +1,135 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Testing
+=======
+
+This document contains useful information how to test the Rust code in the
+kernel.
+
+There are two sorts of tests:
+
+- The KUnit tests.
+- The ``#[test]`` tests.
+
+The KUnit tests
+---------------
+
+These are the tests that come from the examples in the Rust documentation. They
+get transformed into KUnit tests.
+
+Usage
+*****
+
+These tests can be run via KUnit. For example via ``kunit_tool`` (``kunit.py``)
+on the command line::
+
+ ./tools/testing/kunit/kunit.py run --make_options LLVM=1 --arch x86_64 --kconfig_add CONFIG_RUST=y
+
+Alternatively, KUnit can run them as kernel built-in at boot. Refer to
+Documentation/dev-tools/kunit/index.rst for the general KUnit documentation
+and Documentation/dev-tools/kunit/architecture.rst for the details of kernel
+built-in vs. command line testing.
+
+To use these KUnit doctests, the following must be enabled::
+
+ CONFIG_KUNIT
+ Kernel hacking -> Kernel Testing and Coverage -> KUnit - Enable support for unit tests
+ CONFIG_RUST_KERNEL_DOCTESTS
+ Kernel hacking -> Rust hacking -> Doctests for the `kernel` crate
+
+in the kernel config system.
+
+KUnit tests are documentation tests
+***********************************
+
+These documentation tests are typically examples of usage of any item (e.g.
+function, struct, module...).
+
+They are very convenient because they are just written alongside the
+documentation. For instance:
+
+.. code-block:: rust
+
+ /// Sums two numbers.
+ ///
+ /// ```
+ /// assert_eq!(mymod::f(10, 20), 30);
+ /// ```
+ pub fn f(a: i32, b: i32) -> i32 {
+ a + b
+ }
+
+In userspace, the tests are collected and run via ``rustdoc``. Using the tool
+as-is would be useful already, since it allows verifying that examples compile
+(thus enforcing they are kept in sync with the code they document) and as well
+as running those that do not depend on in-kernel APIs.
+
+For the kernel, however, these tests get transformed into KUnit test suites.
+This means that doctests get compiled as Rust kernel objects, allowing them to
+run against a built kernel.
+
+A benefit of this KUnit integration is that Rust doctests get to reuse existing
+testing facilities. For instance, the kernel log would look like::
+
+ KTAP version 1
+ 1..1
+ KTAP version 1
+ # Subtest: rust_doctests_kernel
+ 1..59
+ # rust_doctest_kernel_build_assert_rs_0.location: rust/kernel/build_assert.rs:13
+ ok 1 rust_doctest_kernel_build_assert_rs_0
+ # rust_doctest_kernel_build_assert_rs_1.location: rust/kernel/build_assert.rs:56
+ ok 2 rust_doctest_kernel_build_assert_rs_1
+ # rust_doctest_kernel_init_rs_0.location: rust/kernel/init.rs:122
+ ok 3 rust_doctest_kernel_init_rs_0
+ ...
+ # rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150
+ ok 59 rust_doctest_kernel_types_rs_2
+ # rust_doctests_kernel: pass:59 fail:0 skip:0 total:59
+ # Totals: pass:59 fail:0 skip:0 total:59
+ ok 1 rust_doctests_kernel
+
+Tests using the `? <https://doc.rust-lang.org/reference/expressions/operator-expr.html#the-question-mark-operator>`_
+operator are also supported as usual, e.g.:
+
+.. code-block:: rust
+
+ /// ```
+ /// # use kernel::{spawn_work_item, workqueue};
+ /// spawn_work_item!(workqueue::system(), || pr_info!("x"))?;
+ /// # Ok::<(), Error>(())
+ /// ```
+
+The tests are also compiled with Clippy under ``CLIPPY=1``, just like normal
+code, thus also benefitting from extra linting.
+
+In order for developers to easily see which line of doctest code caused a
+failure, a KTAP diagnostic line is printed to the log. This contains the
+location (file and line) of the original test (i.e. instead of the location in
+the generated Rust file)::
+
+ # rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150
+
+Rust tests appear to assert using the usual ``assert!`` and ``assert_eq!``
+macros from the Rust standard library (``core``). We provide a custom version
+that forwards the call to KUnit instead. Importantly, these macros do not
+require passing context, unlike those for KUnit testing (i.e.
+``struct kunit *``). This makes them easier to use, and readers of the
+documentation do not need to care about which testing framework is used. In
+addition, it may allow us to test third-party code more easily in the future.
+
+A current limitation is that KUnit does not support assertions in other tasks.
+Thus, we presently simply print an error to the kernel log if an assertion
+actually failed. Additionally, doctests are not run for nonpublic functions.
+
+The ``#[test]`` tests
+---------------------
+
+Additionally, there are the ``#[test]`` tests. These can be run using the
+``rusttest`` Make target::
+
+ make LLVM=1 rusttest
+
+This requires the kernel ``.config`` and downloads external repositories. It
+runs the ``#[test]`` tests on the host (currently) and thus is fairly limited in
+what these tests can test.