1 files changed, 152 insertions, 0 deletions
diff --git a/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst
new file mode 100644
index 0000000000..56b975801b
--- /dev/null
+++ b/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst
@@ -0,0 +1,152 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_V2_GET_LINE_IOCTL:
+
+**********************
+GPIO_V2_GET_LINE_IOCTL
+**********************
+
+Name
+====
+
+GPIO_V2_GET_LINE_IOCTL - Request a line or lines from the kernel.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_V2_GET_LINE_IOCTL
+
+``int ioctl(int chip_fd, GPIO_V2_GET_LINE_IOCTL, struct gpio_v2_line_request *request)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``request``
+    The :c:type:`line_request<gpio_v2_line_request>` specifying the lines
+    to request and their configuration.
+
+Description
+===========
+
+On success, the requesting process is granted exclusive access to the line
+value, write access to the line configuration, and may receive events when
+edges are detected on the line, all of which are described in more detail in
+:ref:`gpio-v2-line-request`.
+
+A number of lines may be requested in the one line request, and request
+operations are performed on the requested lines by the kernel as atomically
+as possible. e.g. gpio-v2-line-get-values-ioctl.rst will read all the
+requested lines at once.
+
+The state of a line, including the value of output lines, is guaranteed to
+remain as requested until the returned file descriptor is closed. Once the
+file descriptor is closed, the state of the line becomes uncontrolled from
+the userspace perspective, and may revert to its default state.
+
+Requesting a line already in use is an error (**EBUSY**).
+
+Closing the ``chip_fd`` has no effect on existing line requests.
+
+.. _gpio-v2-get-line-config-rules:
+
+Configuration Rules
+-------------------
+
+For any given requested line, the following configuration rules apply:
+
+The direction flags, ``GPIO_V2_LINE_FLAG_INPUT`` and
+``GPIO_V2_LINE_FLAG_OUTPUT``, cannot be combined. If neither are set then
+the only other flag that may be set is ``GPIO_V2_LINE_FLAG_ACTIVE_LOW``
+and the line is requested "as-is" to allow reading of the line value
+without altering the electrical configuration.
+
+The drive flags, ``GPIO_V2_LINE_FLAG_OPEN_xxx``, require the
+``GPIO_V2_LINE_FLAG_OUTPUT`` to be set.
+Only one drive flag may be set.
+If none are set then the line is assumed push-pull.
+
+Only one bias flag, ``GPIO_V2_LINE_FLAG_BIAS_xxx``, may be set, and it
+requires a direction flag to also be set.
+If no bias flags are set then the bias configuration is not changed.
+
+The edge flags, ``GPIO_V2_LINE_FLAG_EDGE_xxx``, require
+``GPIO_V2_LINE_FLAG_INPUT`` to be set and may be combined to detect both rising
+and falling edges.  Requesting edge detection from a line that does not support
+it is an error (**ENXIO**).
+
+Only one event clock flag, ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_xxx``, may be set.
+If none are set then the event clock defaults to ``CLOCK_MONOTONIC``.
+The ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE`` flag requires supporting hardware
+and a kernel with ``CONFIG_HTE`` set.  Requesting HTE from a device that
+doesn't support it is an error (**EOPNOTSUP**).
+
+The :c:type:`debounce_period_us<gpio_v2_line_attribute>` attribute may only
+be applied to lines with ``GPIO_V2_LINE_FLAG_INPUT`` set. When set, debounce
+applies to both the values returned by gpio-v2-line-get-values-ioctl.rst and
+the edges returned by gpio-v2-line-event-read.rst.  If not
+supported directly by hardware, debouncing is emulated in software by the
+kernel.  Requesting debounce on a line that supports neither debounce in
+hardware nor interrupts, as required for software emulation, is an error
+(**ENXIO**).
+
+Requesting an invalid configuration is an error (**EINVAL**).
+
+.. _gpio-v2-get-line-config-support:
+
+Configuration Support
+---------------------
+
+Where the requested configuration is not directly supported by the underlying
+hardware and driver, the kernel applies one of these approaches:
+
+ - reject the request
+ - emulate the feature in software
+ - treat the feature as best effort
+
+The approach applied depends on whether the feature can reasonably be emulated
+in software, and the impact on the hardware and userspace if the feature is not
+supported.
+The approach applied for each feature is as follows:
+
+==============   ===========
+Feature          Approach
+==============   ===========
+Bias             best effort
+Debounce         emulate
+Direction        reject
+Drive            emulate
+Edge Detection   reject
+==============   ===========
+
+Bias is treated as best effort to allow userspace to apply the same
+configuration for platforms that support internal bias as those that require
+external bias.
+Worst case the line floats rather than being biased as expected.
+
+Debounce is emulated by applying a filter to hardware interrupts on the line.
+An edge event is generated after an edge is detected and the line remains
+stable for the debounce period.
+The event timestamp corresponds to the end of the debounce period.
+
+Drive is emulated by switching the line to an input when the line should not
+be actively driven.
+
+Edge detection requires interrupt support, and is rejected if that is not
+supported. Emulation by polling can still be performed from userspace.
+
+In all cases, the configuration reported by gpio-v2-get-lineinfo-ioctl.rst
+is the requested configuration, not the resulting hardware configuration.
+Userspace cannot determine if a feature is supported in hardware, is
+emulated, or is best effort.
+
+Return Value
+============
+
+On success 0 and the :c:type:`request.fd<gpio_v2_line_request>` contains the
+file descriptor for the request.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.