diff options
Diffstat (limited to 'Documentation/userspace-api/media')
18 files changed, 851 insertions, 38 deletions
diff --git a/Documentation/userspace-api/media/cec/cec-func-open.rst b/Documentation/userspace-api/media/cec/cec-func-open.rst index d86563a34b..125c8ac668 100644 --- a/Documentation/userspace-api/media/cec/cec-func-open.rst +++ b/Documentation/userspace-api/media/cec/cec-func-open.rst @@ -70,5 +70,5 @@ include: ``ENOMEM`` Insufficient kernel memory was available. -``ENXIO`` - No device corresponding to this device special file exists. +``ENODEV`` + Device not found or was removed. diff --git a/Documentation/userspace-api/media/dvb/frontend_f_open.rst b/Documentation/userspace-api/media/dvb/frontend_f_open.rst index bb37eded08..70e169b8f6 100644 --- a/Documentation/userspace-api/media/dvb/frontend_f_open.rst +++ b/Documentation/userspace-api/media/dvb/frontend_f_open.rst @@ -91,7 +91,7 @@ appropriately. - The caller has no permission to access the device. - - ``EBUSY`` - - The the device driver is already in use. + - The device driver is already in use. - - ``EMFILE`` - The process already has the maximum number of files open. diff --git a/Documentation/userspace-api/media/glossary.rst b/Documentation/userspace-api/media/glossary.rst index 96a360edbf..55a9c37130 100644 --- a/Documentation/userspace-api/media/glossary.rst +++ b/Documentation/userspace-api/media/glossary.rst @@ -25,6 +25,13 @@ Glossary See :ref:`cec`. + Data Unit + + Unit of data transported by a bus. On parallel buses, the data unit + consists of one or more related samples while on serial buses the data + unit is logical. If the data unit is image data, it may also be called a + pixel. + Device Driver Part of the Linux Kernel that implements support for a hardware component. @@ -173,6 +180,11 @@ Glossary An integrated circuit that integrates all components of a computer or other electronic systems. + Stream + A distinct flow of data (image data or metadata) from an initial source + to a final sink. The initial source may be e.g. an image sensor and the + final sink e.g. a memory buffer. + V4L2 API **V4L2 userspace API** diff --git a/Documentation/userspace-api/media/v4l/dev-meta.rst b/Documentation/userspace-api/media/v4l/dev-meta.rst index 0e7e1ee147..5eee9ab603 100644 --- a/Documentation/userspace-api/media/v4l/dev-meta.rst +++ b/Documentation/userspace-api/media/v4l/dev-meta.rst @@ -47,6 +47,12 @@ member of the ``fmt`` union as needed per the desired operation. Both drivers and applications must set the remainder of the :c:type:`v4l2_format` structure to 0. +Devices that capture metadata by line have the struct v4l2_fmtdesc +``V4L2_FMT_FLAG_META_LINE_BASED`` flag set for :c:func:`VIDIOC_ENUM_FMT`. Such +devices can typically also :ref:`capture image data <capture>`. This primarily +involves devices that receive the data from a different devices such as a camera +sensor. + .. c:type:: v4l2_meta_format .. tabularcolumns:: |p{1.4cm}|p{2.4cm}|p{13.5cm}| @@ -65,3 +71,18 @@ to 0. - ``buffersize`` - Maximum buffer size in bytes required for data. The value is set by the driver. + * - __u32 + - ``width`` + - Width of a line of metadata in Data Units. Valid when + :c:type`v4l2_fmtdesc` flag ``V4L2_FMT_FLAG_META_LINE_BASED`` is set, + otherwise zero. See :c:func:`VIDIOC_ENUM_FMT`. + * - __u32 + - ``height`` + - Number of rows of metadata. Valid when :c:type`v4l2_fmtdesc` flag + ``V4L2_FMT_FLAG_META_LINE_BASED`` is set, otherwise zero. See + :c:func:`VIDIOC_ENUM_FMT`. + * - __u32 + - ``bytesperline`` + - Offset in bytes between the beginning of two consecutive lines. Valid + when :c:type`v4l2_fmtdesc` flag ``V4L2_FMT_FLAG_META_LINE_BASED`` is + set, otherwise zero. See :c:func:`VIDIOC_ENUM_FMT`. diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst index 43988516ac..161b43f1ce 100644 --- a/Documentation/userspace-api/media/v4l/dev-subdev.rst +++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst @@ -506,6 +506,8 @@ source pads. subdev-formats +.. _subdev-routing: + Streams, multiplexed media pads and internal routing ---------------------------------------------------- @@ -527,9 +529,9 @@ the its sink pad and allows to route them individually to one of its source pads. Subdevice drivers that support multiplexed streams are compatible with -non-multiplexed subdev drivers, but, of course, require a routing configuration -where the link between those two types of drivers contains only a single -stream. +non-multiplexed subdev drivers. However, if the driver at the sink end of a link +does not support streams, then only stream 0 of source end may be captured. +There may be additional limitations specific to the sink device. Understanding streams ^^^^^^^^^^^^^^^^^^^^^ @@ -570,6 +572,29 @@ Any configurations of a stream within a pad, such as format or selections, are independent of similar configurations on other streams. This is subject to change in the future. +Device types and routing setup +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Different kinds of sub-devices have differing behaviour for route activation, +depending on the hardware. In all cases, however, only routes that have the +``V4L2_SUBDEV_STREAM_FL_ACTIVE`` flag set are active. + +Devices generating the streams may allow enabling and disabling some of the +routes or have a fixed routing configuration. If the routes can be disabled, not +declaring the routes (or declaring them without +``V4L2_SUBDEV_STREAM_FL_ACTIVE`` flag set) in ``VIDIOC_SUBDEV_S_ROUTING`` will +disable the routes. ``VIDIOC_SUBDEV_S_ROUTING`` will still return such routes +back to the user in the routes array, with the ``V4L2_SUBDEV_STREAM_FL_ACTIVE`` +flag unset. + +Devices transporting the streams almost always have more configurability with +respect to routing. Typically any route between the sub-device's sink and source +pads is possible, and multiple routes (usually up to certain limited number) may +be active simultaneously. For such devices, no routes are created by the driver +and user-created routes are fully replaced when ``VIDIOC_SUBDEV_S_ROUTING`` is +called on the sub-device. Such newly created routes have the device's default +configuration for format and selection rectangles. + Configuring streams ^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/userspace-api/media/v4l/func-open.rst b/Documentation/userspace-api/media/v4l/func-open.rst index ba23ff1e45..be3808cbf8 100644 --- a/Documentation/userspace-api/media/v4l/func-open.rst +++ b/Documentation/userspace-api/media/v4l/func-open.rst @@ -65,8 +65,8 @@ EBUSY The driver does not support multiple opens and the device is already in use. -ENXIO - No device corresponding to this device special file exists. +ENODEV + Device not found or was removed. ENOMEM Not enough kernel memory was available to complete the request. diff --git a/Documentation/userspace-api/media/v4l/meta-formats.rst b/Documentation/userspace-api/media/v4l/meta-formats.rst index 0bb61fc5bc..c23aac823d 100644 --- a/Documentation/userspace-api/media/v4l/meta-formats.rst +++ b/Documentation/userspace-api/media/v4l/meta-formats.rst @@ -13,9 +13,10 @@ These formats are used for the :ref:`metadata` interface only. :maxdepth: 1 metafmt-d4xx + metafmt-generic metafmt-intel-ipu3 metafmt-rkisp1 metafmt-uvc + metafmt-vivid metafmt-vsp1-hgo metafmt-vsp1-hgt - metafmt-vivid diff --git a/Documentation/userspace-api/media/v4l/metafmt-generic.rst b/Documentation/userspace-api/media/v4l/metafmt-generic.rst new file mode 100644 index 0000000000..78ab56b216 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/metafmt-generic.rst @@ -0,0 +1,340 @@ +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later + +******************************************************************************************************************************************************************************************************************************************************************************** +V4L2_META_FMT_GENERIC_8 ('MET8'), V4L2_META_FMT_GENERIC_CSI2_10 ('MC1A'), V4L2_META_FMT_GENERIC_CSI2_12 ('MC1C'), V4L2_META_FMT_GENERIC_CSI2_14 ('MC1E'), V4L2_META_FMT_GENERIC_CSI2_16 ('MC1G'), V4L2_META_FMT_GENERIC_CSI2_20 ('MC1K'), V4L2_META_FMT_GENERIC_CSI2_24 ('MC1O') +******************************************************************************************************************************************************************************************************************************************************************************** + + +Generic line-based metadata formats + + +Description +=========== + +These generic line-based metadata formats define the memory layout of the data +without defining the format or meaning of the metadata itself. + +.. _v4l2-meta-fmt-generic-8: + +V4L2_META_FMT_GENERIC_8 +----------------------- + +The V4L2_META_FMT_GENERIC_8 format is a plain 8-bit metadata format. This format +is used on CSI-2 for 8 bits per :term:`Data Unit`. + +Additionally it is used for 16 bits per Data Unit when two bytes of metadata are +packed into one 16-bit Data Unit. Otherwise the 16 bits per pixel dataformat is +:ref:`V4L2_META_FMT_GENERIC_CSI2_16 <v4l2-meta-fmt-generic-csi2-16>`. + +**Byte Order Of V4L2_META_FMT_GENERIC_8.** +Each cell is one byte. "M" denotes a byte of metadata. + +.. tabularcolumns:: |p{2.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}| + +.. flat-table:: Sample 4x2 Metadata Frame + :header-rows: 0 + :stub-columns: 0 + :widths: 12 8 8 8 8 + + * - start + 0: + - M\ :sub:`00` + - M\ :sub:`10` + - M\ :sub:`20` + - M\ :sub:`30` + * - start + 4: + - M\ :sub:`01` + - M\ :sub:`11` + - M\ :sub:`21` + - M\ :sub:`31` + +.. _v4l2-meta-fmt-generic-csi2-10: + +V4L2_META_FMT_GENERIC_CSI2_10 +----------------------------- + +V4L2_META_FMT_GENERIC_CSI2_10 contains 8-bit generic metadata packed in 10-bit +Data Units, with one padding byte after every four bytes of metadata. This +format is typically used by CSI-2 receivers with a source that transmits +MEDIA_BUS_FMT_META_10 and the CSI-2 receiver writes the received data to memory +as-is. + +The packing of the data follows the MIPI CSI-2 specification and the padding of +the data is defined in the MIPI CCS specification. + +This format is also used in conjunction with 20 bits per :term:`Data Unit` +formats that pack two bytes of metadata into one Data Unit. Otherwise the +20 bits per pixel dataformat is :ref:`V4L2_META_FMT_GENERIC_CSI2_20 +<v4l2-meta-fmt-generic-csi2-20>`. + +This format is little endian. + +**Byte Order Of V4L2_META_FMT_GENERIC_CSI2_10.** +Each cell is one byte. "M" denotes a byte of metadata and "x" a byte of padding. + +.. tabularcolumns:: |p{2.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{.8cm}| + +.. flat-table:: Sample 4x2 Metadata Frame + :header-rows: 0 + :stub-columns: 0 + :widths: 12 8 8 8 8 8 + + * - start + 0: + - M\ :sub:`00` + - M\ :sub:`10` + - M\ :sub:`20` + - M\ :sub:`30` + - x + * - start + 5: + - M\ :sub:`01` + - M\ :sub:`11` + - M\ :sub:`21` + - M\ :sub:`31` + - x + +.. _v4l2-meta-fmt-generic-csi2-12: + +V4L2_META_FMT_GENERIC_CSI2_12 +----------------------------- + +V4L2_META_FMT_GENERIC_CSI2_12 contains 8-bit generic metadata packed in 12-bit +Data Units, with one padding byte after every two bytes of metadata. This format +is typically used by CSI-2 receivers with a source that transmits +MEDIA_BUS_FMT_META_12 and the CSI-2 receiver writes the received data to memory +as-is. + +The packing of the data follows the MIPI CSI-2 specification and the padding of +the data is defined in the MIPI CCS specification. + +This format is also used in conjunction with 24 bits per :term:`Data Unit` +formats that pack two bytes of metadata into one Data Unit. Otherwise the +24 bits per pixel dataformat is :ref:`V4L2_META_FMT_GENERIC_CSI2_24 +<v4l2-meta-fmt-generic-csi2-24>`. + +This format is little endian. + +**Byte Order Of V4L2_META_FMT_GENERIC_CSI2_12.** +Each cell is one byte. "M" denotes a byte of metadata and "x" a byte of padding. + +.. tabularcolumns:: |p{2.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{.8cm}|p{.8cm}| + +.. flat-table:: Sample 4x2 Metadata Frame + :header-rows: 0 + :stub-columns: 0 + :widths: 12 8 8 8 8 8 8 + + * - start + 0: + - M\ :sub:`00` + - M\ :sub:`10` + - x + - M\ :sub:`20` + - M\ :sub:`30` + - x + * - start + 6: + - M\ :sub:`01` + - M\ :sub:`11` + - x + - M\ :sub:`21` + - M\ :sub:`31` + - x + +.. _v4l2-meta-fmt-generic-csi2-14: + +V4L2_META_FMT_GENERIC_CSI2_14 +----------------------------- + +V4L2_META_FMT_GENERIC_CSI2_14 contains 8-bit generic metadata packed in 14-bit +Data Units, with three padding bytes after every four bytes of metadata. This +format is typically used by CSI-2 receivers with a source that transmits +MEDIA_BUS_FMT_META_14 and the CSI-2 receiver writes the received data to memory +as-is. + +The packing of the data follows the MIPI CSI-2 specification and the padding of +the data is defined in the MIPI CCS specification. + +This format is little endian. + +**Byte Order Of V4L2_META_FMT_GENERIC_CSI2_14.** +Each cell is one byte. "M" denotes a byte of metadata and "x" a byte of padding. + +.. tabularcolumns:: |p{2.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{.8cm}|p{.8cm}|p{.8cm}| + +.. flat-table:: Sample 4x2 Metadata Frame + :header-rows: 0 + :stub-columns: 0 + :widths: 12 8 8 8 8 8 8 8 + + * - start + 0: + - M\ :sub:`00` + - M\ :sub:`10` + - M\ :sub:`20` + - M\ :sub:`30` + - x + - x + - x + * - start + 7: + - M\ :sub:`01` + - M\ :sub:`11` + - M\ :sub:`21` + - M\ :sub:`31` + - x + - x + - x + +.. _v4l2-meta-fmt-generic-csi2-16: + +V4L2_META_FMT_GENERIC_CSI2_16 +----------------------------- + +V4L2_META_FMT_GENERIC_CSI2_16 contains 8-bit generic metadata packed in 16-bit +Data Units, with one padding byte after every byte of metadata. This format is +typically used by CSI-2 receivers with a source that transmits +MEDIA_BUS_FMT_META_16 and the CSI-2 receiver writes the received data to memory +as-is. + +The packing of the data follows the MIPI CSI-2 specification and the padding of +the data is defined in the MIPI CCS specification. + +Some devices support more efficient packing of metadata in conjunction with +16-bit image data. In that case the dataformat is +:ref:`V4L2_META_FMT_GENERIC_8 <v4l2-meta-fmt-generic-8>`. + +This format is little endian. + +**Byte Order Of V4L2_META_FMT_GENERIC_CSI2_16.** +Each cell is one byte. "M" denotes a byte of metadata and "x" a byte of padding. + +.. tabularcolumns:: |p{2.4cm}|p{1.2cm}|p{.8cm}|p{1.2cm}|p{.8cm}|p{1.2cm}|p{.8cm}|p{1.2cm}|p{.8cm}| + +.. flat-table:: Sample 4x2 Metadata Frame + :header-rows: 0 + :stub-columns: 0 + :widths: 12 8 8 8 8 8 8 8 8 + + * - start + 0: + - M\ :sub:`00` + - x + - M\ :sub:`10` + - x + - M\ :sub:`20` + - x + - M\ :sub:`30` + - x + * - start + 8: + - M\ :sub:`01` + - x + - M\ :sub:`11` + - x + - M\ :sub:`21` + - x + - M\ :sub:`31` + - x + +.. _v4l2-meta-fmt-generic-csi2-20: + +V4L2_META_FMT_GENERIC_CSI2_20 +----------------------------- + +V4L2_META_FMT_GENERIC_CSI2_20 contains 8-bit generic metadata packed in 20-bit +Data Units, with alternating one or two padding bytes after every byte of +metadata. This format is typically used by CSI-2 receivers with a source that +transmits MEDIA_BUS_FMT_META_20 and the CSI-2 receiver writes the received data +to memory as-is. + +The packing of the data follows the MIPI CSI-2 specification and the padding of +the data is defined in the MIPI CCS specification. + +Some devices support more efficient packing of metadata in conjunction with +16-bit image data. In that case the dataformat is +:ref:`V4L2_META_FMT_GENERIC_CSI2_10 <v4l2-meta-fmt-generic-csi2-10>`. + +This format is little endian. + +**Byte Order Of V4L2_META_FMT_GENERIC_CSI2_20.** +Each cell is one byte. "M" denotes a byte of metadata and "x" a byte of padding. + +.. tabularcolumns:: |p{2.4cm}|p{1.2cm}|p{.8cm}|p{1.2cm}|p{.8cm}|p{.8cm}|p{1.2cm}|p{.8cm}|p{1.2cm}|p{.8cm}|p{.8cm}| + +.. flat-table:: Sample 4x2 Metadata Frame + :header-rows: 0 + :stub-columns: 0 + :widths: 12 8 8 8 8 8 8 8 8 8 8 + + * - start + 0: + - M\ :sub:`00` + - x + - M\ :sub:`10` + - x + - x + - M\ :sub:`20` + - x + - M\ :sub:`30` + - x + - x + * - start + 10: + - M\ :sub:`01` + - x + - M\ :sub:`11` + - x + - x + - M\ :sub:`21` + - x + - M\ :sub:`31` + - x + - x + +.. _v4l2-meta-fmt-generic-csi2-24: + +V4L2_META_FMT_GENERIC_CSI2_24 +----------------------------- + +V4L2_META_FMT_GENERIC_CSI2_24 contains 8-bit generic metadata packed in 24-bit +Data Units, with two padding bytes after every byte of metadata. This format is +typically used by CSI-2 receivers with a source that transmits +MEDIA_BUS_FMT_META_24 and the CSI-2 receiver writes the received data to memory +as-is. + +The packing of the data follows the MIPI CSI-2 specification and the padding of +the data is defined in the MIPI CCS specification. + +Some devices support more efficient packing of metadata in conjunction with +16-bit image data. In that case the dataformat is +:ref:`V4L2_META_FMT_GENERIC_CSI2_12 <v4l2-meta-fmt-generic-csi2-12>`. + +This format is little endian. + +**Byte Order Of V4L2_META_FMT_GENERIC_CSI2_24.** +Each cell is one byte. "M" denotes a byte of metadata and "x" a byte of padding. + +.. tabularcolumns:: |p{2.4cm}|p{1.2cm}|p{.8cm}|p{.8cm}|p{1.2cm}|p{.8cm}|p{.8cm}|p{1.2cm}|p{.8cm}|p{.8cm}|p{1.2cm}|p{.8cm}|p{.8cm}| + +.. flat-table:: Sample 4x2 Metadata Frame + :header-rows: 0 + :stub-columns: 0 + :widths: 12 8 8 8 8 8 8 8 8 8 8 8 8 + + * - start + 0: + - M\ :sub:`00` + - x + - x + - M\ :sub:`10` + - x + - x + - M\ :sub:`20` + - x + - x + - M\ :sub:`30` + - x + - x + * - start + 12: + - M\ :sub:`01` + - x + - x + - M\ :sub:`11` + - x + - x + - M\ :sub:`21` + - x + - x + - M\ :sub:`31` + - x + - x diff --git a/Documentation/userspace-api/media/v4l/mmap.rst b/Documentation/userspace-api/media/v4l/mmap.rst index a5672573dd..1a48c3cbda 100644 --- a/Documentation/userspace-api/media/v4l/mmap.rst +++ b/Documentation/userspace-api/media/v4l/mmap.rst @@ -188,7 +188,7 @@ Example: Mapping buffers in the multi-planar API buffers[i].start[j] = mmap(NULL, buffer.m.planes[j].length, PROT_READ | PROT_WRITE, /* recommended */ MAP_SHARED, /* recommended */ - fd, buffer.m.planes[j].m.offset); + fd, buffer.m.planes[j].m.mem_offset); if (MAP_FAILED == buffers[i].start[j]) { /* If you do not exit here you should unmap() and free() diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst index cf8e4dfbfb..b3c5779521 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst @@ -36,6 +36,8 @@ are often referred to as greyscale formats. - Byte 2 - Byte 3 - Byte 4 + - Byte 5 + - Byte 6 * .. _V4L2-PIX-FMT-GREY: @@ -47,6 +49,8 @@ are often referred to as greyscale formats. - ... - ... - ... + - ... + - ... * .. _V4L2-PIX-FMT-IPU3-Y10: @@ -58,6 +62,8 @@ are often referred to as greyscale formats. - Y'\ :sub:`2`\ [3:0] Y'\ :sub:`1`\ [9:6] - Y'\ :sub:`3`\ [1:0] Y'\ :sub:`2`\ [9:4] - Y'\ :sub:`3`\ [9:2] + - ... + - ... * .. _V4L2-PIX-FMT-Y10: @@ -69,6 +75,8 @@ are often referred to as greyscale formats. - ... - ... - ... + - ... + - ... * .. _V4L2-PIX-FMT-Y10BPACK: @@ -80,6 +88,8 @@ are often referred to as greyscale formats. - Y'\ :sub:`1`\ [3:0] Y'\ :sub:`2`\ [9:6] - Y'\ :sub:`2`\ [5:0] Y'\ :sub:`3`\ [9:8] - Y'\ :sub:`3`\ [7:0] + - ... + - ... * .. _V4L2-PIX-FMT-Y10P: @@ -91,6 +101,8 @@ are often referred to as greyscale formats. - Y'\ :sub:`2`\ [9:2] - Y'\ :sub:`3`\ [9:2] - Y'\ :sub:`3`\ [1:0] Y'\ :sub:`2`\ [1:0] Y'\ :sub:`1`\ [1:0] Y'\ :sub:`0`\ [1:0] + - ... + - ... * .. _V4L2-PIX-FMT-Y12: @@ -102,6 +114,8 @@ are often referred to as greyscale formats. - ... - ... - ... + - ... + - ... * .. _V4L2-PIX-FMT-Y012: @@ -113,6 +127,21 @@ are often referred to as greyscale formats. - ... - ... - ... + - ... + - ... + + * .. _V4L2-PIX-FMT-Y12P: + + - ``V4L2_PIX_FMT_Y12P`` + - 'Y12P' + + - Y'\ :sub:`0`\ [11:4] + - Y'\ :sub:`1`\ [11:4] + - Y'\ :sub:`1`\ [3:0] Y'\ :sub:`0`\ [3:0] + - ... + - ... + - ... + - ... * .. _V4L2-PIX-FMT-Y14: @@ -124,6 +153,21 @@ are often referred to as greyscale formats. - ... - ... - ... + - ... + - ... + + * .. _V4L2-PIX-FMT-Y14P: + + - ``V4L2_PIX_FMT_Y14P`` + - 'Y14P' + + - Y'\ :sub:`0`\ [13:6] + - Y'\ :sub:`1`\ [13:6] + - Y'\ :sub:`2`\ [13:6] + - Y'\ :sub:`3`\ [13:6] + - Y'\ :sub:`1`\ [1:0] Y'\ :sub:`0`\ [5:0] + - Y'\ :sub:`2`\ [3:0] Y'\ :sub:`1`\ [5:2] + - Y'\ :sub:`3`\ [5:0] Y'\ :sub:`2`\ [5:4] * .. _V4L2-PIX-FMT-Y16: @@ -135,6 +179,8 @@ are often referred to as greyscale formats. - ... - ... - ... + - ... + - ... * .. _V4L2-PIX-FMT-Y16-BE: @@ -146,6 +192,8 @@ are often referred to as greyscale formats. - ... - ... - ... + - ... + - ... .. raw:: latex diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst index eb3cd20b0c..d2a6cd2e1e 100644 --- a/Documentation/userspace-api/media/v4l/subdev-formats.rst +++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst @@ -33,7 +33,7 @@ Media Bus Formats * - __u32 - ``field`` - Field order, from enum :c:type:`v4l2_field`. See - :ref:`field-order` for details. + :ref:`field-order` for details. Zero for metadata mbus codes. * - __u32 - ``colorspace`` - Image colorspace, from enum :c:type:`v4l2_colorspace`. @@ -45,7 +45,7 @@ Media Bus Formats conversion is supported by setting the flag V4L2_SUBDEV_MBUS_CODE_CSC_COLORSPACE in the corresponding struct :c:type:`v4l2_subdev_mbus_code_enum` during enumeration. - See :ref:`v4l2-subdev-mbus-code-flags`. + See :ref:`v4l2-subdev-mbus-code-flags`. Zero for metadata mbus codes. * - union { - (anonymous) * - __u16 @@ -61,7 +61,7 @@ Media Bus Formats that ycbcr_enc conversion is supported by setting the flag V4L2_SUBDEV_MBUS_CODE_CSC_YCBCR_ENC in the corresponding struct :c:type:`v4l2_subdev_mbus_code_enum` during enumeration. - See :ref:`v4l2-subdev-mbus-code-flags`. + See :ref:`v4l2-subdev-mbus-code-flags`. Zero for metadata mbus codes. * - __u16 - ``hsv_enc`` - HSV encoding, from enum :c:type:`v4l2_hsv_encoding`. @@ -75,7 +75,7 @@ Media Bus Formats that hsv_enc conversion is supported by setting the flag V4L2_SUBDEV_MBUS_CODE_CSC_HSV_ENC in the corresponding struct :c:type:`v4l2_subdev_mbus_code_enum` during enumeration. - See :ref:`v4l2-subdev-mbus-code-flags` + See :ref:`v4l2-subdev-mbus-code-flags`. Zero for metadata mbus codes. * - } - * - __u16 @@ -90,8 +90,8 @@ Media Bus Formats The driver indicates that quantization conversion is supported by setting the flag V4L2_SUBDEV_MBUS_CODE_CSC_QUANTIZATION in the corresponding struct :c:type:`v4l2_subdev_mbus_code_enum` - during enumeration. See :ref:`v4l2-subdev-mbus-code-flags`. - + during enumeration. See :ref:`v4l2-subdev-mbus-code-flags`. Zero for + metadata mbus codes. * - __u16 - ``xfer_func`` - Transfer function, from enum :c:type:`v4l2_xfer_func`. @@ -104,7 +104,8 @@ Media Bus Formats The driver indicates that the transfer function conversion is supported by setting the flag V4L2_SUBDEV_MBUS_CODE_CSC_XFER_FUNC in the corresponding struct :c:type:`v4l2_subdev_mbus_code_enum` - during enumeration. See :ref:`v4l2-subdev-mbus-code-flags`. + during enumeration. See :ref:`v4l2-subdev-mbus-code-flags`. Zero for + metadata mbus codes. * - __u16 - ``flags`` - flags See: :ref:v4l2-mbus-framefmt-flags @@ -8306,3 +8307,257 @@ The following table lists the existing metadata formats. both sides of the link and the bus format is a fixed metadata format that is not configurable from userspace. Width and height will be set to 0 for this format. + +Generic Serial Metadata Formats +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Generic serial metadata formats are used on serial buses where the actual data +content is more or less device specific but the data is transmitted and received +by multiple devices that do not process the data in any way, simply writing +it to system memory for processing in software at the end of the pipeline. + +"b" in an array cell signifies a byte of data, followed by the number of the bit +and finally the bit number in subscript. "x" indicates a padding bit. + +.. _media-bus-format-generic-meta: + +.. cssclass: longtable + +.. flat-table:: Generic Serial Metadata Formats + :header-rows: 2 + :stub-columns: 0 + + * - Identifier + - Code + - + - :cspan:`23` Data organization within bus :term:`Data Unit` + * - + - + - Bit + - 23 + - 22 + - 21 + - 20 + - 19 + - 18 + - 17 + - 16 + - 15 + - 14 + - 13 + - 12 + - 11 + - 10 + - 9 + - 8 + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + * .. _MEDIA-BUS-FMT-META-8: + + - MEDIA_BUS_FMT_META_8 + - 0x8001 + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + * .. _MEDIA-BUS-FMT-META-10: + + - MEDIA_BUS_FMT_META_10 + - 0x8002 + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - x + - x + * .. _MEDIA-BUS-FMT-META-12: + + - MEDIA_BUS_FMT_META_12 + - 0x8003 + - + - + - + - + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - x + - x + - x + - x + * .. _MEDIA-BUS-FMT-META-14: + + - MEDIA_BUS_FMT_META_14 + - 0x8004 + - + - + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - x + - x + - x + - x + - x + - x + * .. _MEDIA-BUS-FMT-META-16: + + - MEDIA_BUS_FMT_META_16 + - 0x8005 + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - x + - x + - x + - x + - x + - x + - x + - x + * .. _MEDIA-BUS-FMT-META-20: + + - MEDIA_BUS_FMT_META_20 + - 0x8006 + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x + * .. _MEDIA-BUS-FMT-META-24: + + - MEDIA_BUS_FMT_META_24 + - 0x8007 + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x + - x diff --git a/Documentation/userspace-api/media/v4l/user-func.rst b/Documentation/userspace-api/media/v4l/user-func.rst index 15ff0bf7bb..6f66113880 100644 --- a/Documentation/userspace-api/media/v4l/user-func.rst +++ b/Documentation/userspace-api/media/v4l/user-func.rst @@ -62,6 +62,7 @@ Function Reference vidioc-query-dv-timings vidioc-querystd vidioc-reqbufs + vidioc-remove-bufs vidioc-s-hw-freq-seek vidioc-streamon vidioc-subdev-enum-frame-interval diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst index 000c154b0f..3adb3d2055 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst @@ -227,6 +227,13 @@ the ``mbus_code`` field is handled differently: The application can ask to configure the quantization of the capture device when calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with :ref:`V4L2_PIX_FMT_FLAG_SET_CSC <v4l2-pix-fmt-flag-set-csc>` set. + * - ``V4L2_FMT_FLAG_META_LINE_BASED`` + - 0x0200 + - The metadata format is line-based. In this case the ``width``, + ``height`` and ``bytesperline`` fields of :c:type:`v4l2_meta_format` are + valid. The buffer consists of ``height`` lines, each having ``width`` + Data Units of data and the offset (in bytes) between the beginning of + each two consecutive lines is ``bytesperline``. Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-remove-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-remove-bufs.rst new file mode 100644 index 0000000000..1995b39af9 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/vidioc-remove-bufs.rst @@ -0,0 +1,86 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L + +.. _VIDIOC_REMOVE_BUFS: + +************************ +ioctl VIDIOC_REMOVE_BUFS +************************ + +Name +==== + +VIDIOC_REMOVE_BUFS - Removes buffers from a queue + +Synopsis +======== + +.. c:macro:: VIDIOC_REMOVE_BUFS + +``int ioctl(int fd, VIDIOC_REMOVE_BUFS, struct v4l2_remove_buffers *argp)`` + +Arguments +========= + +``fd`` + File descriptor returned by :c:func:`open()`. + +``argp`` + Pointer to struct :c:type:`v4l2_remove_buffers`. + +Description +=========== + +Applications can optionally call the :ref:`VIDIOC_REMOVE_BUFS` ioctl to +remove buffers from a queue. +:ref:`VIDIOC_CREATE_BUFS` ioctl support is mandatory to enable :ref:`VIDIOC_REMOVE_BUFS`. +This ioctl is available if the ``V4L2_BUF_CAP_SUPPORTS_REMOVE_BUFS`` capability +is set on the queue when :c:func:`VIDIOC_REQBUFS` or :c:func:`VIDIOC_CREATE_BUFS` +are invoked. + +.. c:type:: v4l2_remove_buffers + +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| + +.. flat-table:: struct v4l2_remove_buffers + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``index`` + - The starting buffer index to remove. This field is ignored if count == 0. + * - __u32 + - ``count`` + - The number of buffers to be removed with indices 'index' until 'index + count - 1'. + All buffers in this range must be valid and in DEQUEUED state. + :ref:`VIDIOC_REMOVE_BUFS` will always check the validity of ``type`, if it is + invalid it returns ``EINVAL`` error code. + If count is set to 0 :ref:`VIDIOC_REMOVE_BUFS` will do nothing and return 0. + * - __u32 + - ``type`` + - Type of the stream or buffers, this is the same as the struct + :c:type:`v4l2_format` ``type`` field. See + :c:type:`v4l2_buf_type` for valid values. + * - __u32 + - ``reserved``\ [13] + - A place holder for future extensions. Drivers and applications + must set the array to zero. + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. If an error occurs, no +buffers will be freed and one of the error codes below will be returned: + +EBUSY + File I/O is in progress. + One or more of the buffers in the range ``index`` to ``index + count - 1`` are not + in DEQUEUED state. + +EINVAL + One or more of the buffers in the range ``index`` to ``index + count - 1`` do not + exist in the queue. + The buffer type (``type`` field) is not valid. diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst index 0b3a41a45d..bbc22dd760 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst @@ -121,6 +121,7 @@ aborting or finishing any DMA in progress, an implicit .. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF: .. _V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS: .. _V4L2-BUF-CAP-SUPPORTS-MAX-NUM-BUFFERS: +.. _V4L2-BUF-CAP-SUPPORTS-REMOVE-BUFS: .. raw:: latex diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst index 92d933631f..88a748103a 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst @@ -37,9 +37,9 @@ Description .. note:: - This is an :ref:`obsolete` interface and may be removed - in the future. It is superseded by - :ref:`the selection API <VIDIOC_SUBDEV_G_SELECTION>`. + This is an :ref:`obsolete` interface and may be removed in the future. It is + superseded by :ref:`the selection API <VIDIOC_SUBDEV_G_SELECTION>`. No new + extensions to the :c:type:`v4l2_subdev_crop` structure will be accepted. To retrieve the current crop rectangle applications set the ``pad`` field of a struct :c:type:`v4l2_subdev_crop` to the diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst index 26b5004bfe..1cf7954806 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst @@ -43,23 +43,39 @@ The routing configuration determines the flows of data inside an entity. Drivers report their current routing tables using the ``VIDIOC_SUBDEV_G_ROUTING`` ioctl and application may enable or disable routes with the ``VIDIOC_SUBDEV_S_ROUTING`` ioctl, by adding or removing routes and -setting or clearing flags of the ``flags`` field of a -struct :c:type:`v4l2_subdev_route`. +setting or clearing flags of the ``flags`` field of a struct +:c:type:`v4l2_subdev_route`. Similarly to ``VIDIOC_SUBDEV_G_ROUTING``, also +``VIDIOC_SUBDEV_S_ROUTING`` returns the routes back to the user. -All stream configurations are reset when ``VIDIOC_SUBDEV_S_ROUTING`` is called. This -means that the userspace must reconfigure all streams after calling the ioctl -with e.g. ``VIDIOC_SUBDEV_S_FMT``. +All stream configurations are reset when ``VIDIOC_SUBDEV_S_ROUTING`` is called. +This means that the userspace must reconfigure all stream formats and selections +after calling the ioctl with e.g. ``VIDIOC_SUBDEV_S_FMT``. Only subdevices which have both sink and source pads can support routing. -When inspecting routes through ``VIDIOC_SUBDEV_G_ROUTING`` and the application -provided ``num_routes`` is not big enough to contain all the available routes -the subdevice exposes, drivers return the ENOSPC error code and adjust the -value of the ``num_routes`` field. Application should then reserve enough memory -for all the route entries and call ``VIDIOC_SUBDEV_G_ROUTING`` again. - -On a successful ``VIDIOC_SUBDEV_G_ROUTING`` call the driver updates the -``num_routes`` field to reflect the actual number of routes returned. +The ``len_routes`` field indicates the number of routes that can fit in the +``routes`` array allocated by userspace. It is set by applications for both +ioctls to indicate how many routes the kernel can return, and is never modified +by the kernel. + +The ``num_routes`` field indicates the number of routes in the routing +table. For ``VIDIOC_SUBDEV_S_ROUTING``, it is set by userspace to the number of +routes that the application stored in the ``routes`` array. For both ioctls, it +is returned by the kernel and indicates how many routes are stored in the +subdevice routing table. This may be smaller or larger than the value of +``num_routes`` set by the application for ``VIDIOC_SUBDEV_S_ROUTING``, as +drivers may adjust the requested routing table. + +The kernel can return a ``num_routes`` value larger than ``len_routes`` from +both ioctls. This indicates thare are more routes in the routing table than fits +the ``routes`` array. In this case, the ``routes`` array is filled by the kernel +with the first ``len_routes`` entries of the subdevice routing table. This is +not considered to be an error, and the ioctl call succeeds. If the applications +wants to retrieve the missing routes, it can issue a new +``VIDIOC_SUBDEV_G_ROUTING`` call with a large enough ``routes`` array. + +``VIDIOC_SUBDEV_S_ROUTING`` may return more routes than the user provided in +``num_routes`` field due to e.g. hardware properties. .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -74,6 +90,9 @@ On a successful ``VIDIOC_SUBDEV_G_ROUTING`` call the driver updates the - ``which`` - Routing table to be accessed, from enum :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`. + * - __u32 + - ``len_routes`` + - The length of the array (as in memory reserved for the array) * - struct :c:type:`v4l2_subdev_route` - ``routes[]`` - Array of struct :c:type:`v4l2_subdev_route` entries @@ -81,7 +100,7 @@ On a successful ``VIDIOC_SUBDEV_G_ROUTING`` call the driver updates the - ``num_routes`` - Number of entries of the routes array * - __u32 - - ``reserved``\ [5] + - ``reserved``\ [11] - Reserved for future extensions. Applications and drivers must set the array to zero. @@ -135,10 +154,6 @@ On success 0 is returned, on error -1 and the ``errno`` variable is set appropriately. The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. -ENOSPC - The application provided ``num_routes`` is not big enough to contain - all the available routes the subdevice exposes. - EINVAL The sink or source pad identifiers reference a non-existing pad or reference pads of different types (ie. the sink_pad identifiers refers to a source diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions index 3e58aac4ef..bdc628e8c1 100644 --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions @@ -215,6 +215,7 @@ replace define V4L2_FMT_FLAG_CSC_XFER_FUNC fmtdesc-flags replace define V4L2_FMT_FLAG_CSC_YCBCR_ENC fmtdesc-flags replace define V4L2_FMT_FLAG_CSC_HSV_ENC fmtdesc-flags replace define V4L2_FMT_FLAG_CSC_QUANTIZATION fmtdesc-flags +replace define V4L2_FMT_FLAG_META_LINE_BASED fmtdesc-flags # V4L2 timecode types replace define V4L2_TC_TYPE_24FPS timecode-type |