diff options
Diffstat (limited to 'Documentation/virt/kvm/arm')
| -rw-r--r-- | Documentation/virt/kvm/arm/hyp-abi.rst | 78 | ||||
| -rw-r--r-- | Documentation/virt/kvm/arm/hypercalls.rst | 138 | ||||
| -rw-r--r-- | Documentation/virt/kvm/arm/index.rst | 13 | ||||
| -rw-r--r-- | Documentation/virt/kvm/arm/ptp_kvm.rst | 25 | ||||
| -rw-r--r-- | Documentation/virt/kvm/arm/pvtime.rst | 82 |
5 files changed, 336 insertions, 0 deletions
diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst new file mode 100644 index 000000000..412b27644 --- /dev/null +++ b/Documentation/virt/kvm/arm/hyp-abi.rst @@ -0,0 +1,78 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +Internal ABI between the kernel and HYP +======================================= + +This file documents the interaction between the Linux kernel and the +hypervisor layer when running Linux as a hypervisor (for example +KVM). It doesn't cover the interaction of the kernel with the +hypervisor when running as a guest (under Xen, KVM or any other +hypervisor), or any hypervisor-specific interaction when the kernel is +used as a host. + +Note: KVM/arm has been removed from the kernel. The API described +here is still valid though, as it allows the kernel to kexec when +booted at HYP. It can also be used by a hypervisor other than KVM +if necessary. + +On arm and arm64 (without VHE), the kernel doesn't run in hypervisor +mode, but still needs to interact with it, allowing a built-in +hypervisor to be either installed or torn down. + +In order to achieve this, the kernel must be booted at HYP (arm) or +EL2 (arm64), allowing it to install a set of stubs before dropping to +SVC/EL1. These stubs are accessible by using a 'hvc #0' instruction, +and only act on individual CPUs. + +Unless specified otherwise, any built-in hypervisor must implement +these functions (see arch/arm{,64}/include/asm/virt.h): + +* :: + + r0/x0 = HVC_SET_VECTORS + r1/x1 = vectors + + Set HVBAR/VBAR_EL2 to 'vectors' to enable a hypervisor. 'vectors' + must be a physical address, and respect the alignment requirements + of the architecture. Only implemented by the initial stubs, not by + Linux hypervisors. + +* :: + + r0/x0 = HVC_RESET_VECTORS + + Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials + stubs' exception vector value. This effectively disables an existing + hypervisor. + +* :: + + r0/x0 = HVC_SOFT_RESTART + r1/x1 = restart address + x2 = x0's value when entering the next payload (arm64) + x3 = x1's value when entering the next payload (arm64) + x4 = x2's value when entering the next payload (arm64) + + Mask all exceptions, disable the MMU, clear I+D bits, move the arguments + into place (arm64 only), and jump to the restart address while at HYP/EL2. + This hypercall is not expected to return to its caller. + +* :: + + x0 = HVC_FINALISE_EL2 (arm64 only) + + Finish configuring EL2 depending on the command-line options, + including an attempt to upgrade the kernel's exception level from + EL1 to EL2 by enabling the VHE mode. This is conditioned by the CPU + supporting VHE, the EL2 MMU being off, and VHE not being disabled by + any other means (command line option, for example). + +Any other value of r0/x0 triggers a hypervisor-specific handling, +which is not documented here. + +The return value of a stub hypercall is held by r0/x0, and is 0 on +success, and HVC_STUB_ERR on error. A stub hypercall is allowed to +clobber any of the caller-saved registers (x0-x18 on arm64, r0-r3 and +ip on arm). It is thus recommended to use a function call to perform +the hypercall. diff --git a/Documentation/virt/kvm/arm/hypercalls.rst b/Documentation/virt/kvm/arm/hypercalls.rst new file mode 100644 index 000000000..3e2308464 --- /dev/null +++ b/Documentation/virt/kvm/arm/hypercalls.rst @@ -0,0 +1,138 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +ARM Hypercall Interface +======================= + +KVM handles the hypercall services as requested by the guests. New hypercall +services are regularly made available by the ARM specification or by KVM (as +vendor services) if they make sense from a virtualization point of view. + +This means that a guest booted on two different versions of KVM can observe +two different "firmware" revisions. This could cause issues if a given guest +is tied to a particular version of a hypercall service, or if a migration +causes a different version to be exposed out of the blue to an unsuspecting +guest. + +In order to remedy this situation, KVM exposes a set of "firmware +pseudo-registers" that can be manipulated using the GET/SET_ONE_REG +interface. These registers can be saved/restored by userspace, and set +to a convenient value as required. + +The following registers are defined: + +* KVM_REG_ARM_PSCI_VERSION: + + KVM implements the PSCI (Power State Coordination Interface) + specification in order to provide services such as CPU on/off, reset + and power-off to the guest. + + - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set + (and thus has already been initialized) + - Returns the current PSCI version on GET_ONE_REG (defaulting to the + highest PSCI version implemented by KVM and compatible with v0.2) + - Allows any PSCI version implemented by KVM and compatible with + v0.2 to be set with SET_ONE_REG + - Affects the whole VM (even if the register view is per-vcpu) + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1: + Holds the state of the firmware support to mitigate CVE-2017-5715, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_1 in [1]. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL: + KVM does not offer + firmware support for the workaround. The mitigation status for the + guest is unknown. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL: + The workaround HVC call is + available to the guest and required for the mitigation. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED: + The workaround HVC call + is available to the guest, but it is not needed on this VCPU. + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2: + Holds the state of the firmware support to mitigate CVE-2018-3639, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_2 in [1]_. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL: + A workaround is not + available. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN: + The workaround state is + unknown. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL: + The workaround is available, + and can be disabled by a vCPU. If + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for + this vCPU. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED: + The workaround is always active on this vCPU or it is not needed. + + +Bitmap Feature Firmware Registers +--------------------------------- + +Contrary to the above registers, the following registers exposes the +hypercall services in the form of a feature-bitmap to the userspace. This +bitmap is translated to the services that are available to the guest. +There is a register defined per service call owner and can be accessed via +GET/SET_ONE_REG interface. + +By default, these registers are set with the upper limit of the features +that are supported. This way userspace can discover all the usable +hypercall services via GET_ONE_REG. The user-space can write-back the +desired bitmap back via SET_ONE_REG. The features for the registers that +are untouched, probably because userspace isn't aware of them, will be +exposed as is to the guest. + +Note that KVM will not allow the userspace to configure the registers +anymore once any of the vCPUs has run at least once. Instead, it will +return a -EBUSY. + +The pseudo-firmware bitmap register are as follows: + +* KVM_REG_ARM_STD_BMAP: + Controls the bitmap of the ARM Standard Secure Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0: + The bit represents the services offered under v1.0 of ARM True Random + Number Generator (TRNG) specification, ARM DEN0098. + +* KVM_REG_ARM_STD_HYP_BMAP: + Controls the bitmap of the ARM Standard Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME: + The bit represents the Paravirtualized Time service as represented by + ARM DEN0057A. + +* KVM_REG_ARM_VENDOR_HYP_BMAP: + Controls the bitmap of the Vendor specific Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT + The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID + and ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID function-ids. + + Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP: + The bit represents the Precision Time Protocol KVM service. + +Errors: + + ======= ============================================================= + -ENOENT Unknown register accessed. + -EBUSY Attempt a 'write' to the register after the VM has started. + -EINVAL Invalid bitmap written to the register. + ======= ============================================================= + +.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf diff --git a/Documentation/virt/kvm/arm/index.rst b/Documentation/virt/kvm/arm/index.rst new file mode 100644 index 000000000..e84848432 --- /dev/null +++ b/Documentation/virt/kvm/arm/index.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=== +ARM +=== + +.. toctree:: + :maxdepth: 2 + + hyp-abi + hypercalls + pvtime + ptp_kvm diff --git a/Documentation/virt/kvm/arm/ptp_kvm.rst b/Documentation/virt/kvm/arm/ptp_kvm.rst new file mode 100644 index 000000000..aecdc80dd --- /dev/null +++ b/Documentation/virt/kvm/arm/ptp_kvm.rst @@ -0,0 +1,25 @@ +.. SPDX-License-Identifier: GPL-2.0 + +PTP_KVM support for arm/arm64 +============================= + +PTP_KVM is used for high precision time sync between host and guests. +It relies on transferring the wall clock and counter value from the +host to the guest using a KVM-specific hypercall. + +* ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID: 0x86000001 + +This hypercall uses the SMC32/HVC32 calling convention: + +ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID + ============== ======== ===================================== + Function ID: (uint32) 0x86000001 + Arguments: (uint32) KVM_PTP_VIRT_COUNTER(0) + KVM_PTP_PHYS_COUNTER(1) + Return Values: (int32) NOT_SUPPORTED(-1) on error, or + (uint32) Upper 32 bits of wall clock time (r0) + (uint32) Lower 32 bits of wall clock time (r1) + (uint32) Upper 32 bits of counter (r2) + (uint32) Lower 32 bits of counter (r3) + Endianness: No Restrictions. + ============== ======== ===================================== diff --git a/Documentation/virt/kvm/arm/pvtime.rst b/Documentation/virt/kvm/arm/pvtime.rst new file mode 100644 index 000000000..e88b34e58 --- /dev/null +++ b/Documentation/virt/kvm/arm/pvtime.rst @@ -0,0 +1,82 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Paravirtualized time support for arm64 +====================================== + +Arm specification DEN0057/A defines a standard for paravirtualised time +support for AArch64 guests: + +https://developer.arm.com/docs/den0057/a + +KVM/arm64 implements the stolen time part of this specification by providing +some hypervisor service calls to support a paravirtualized guest obtaining a +view of the amount of time stolen from its execution. + +Two new SMCCC compatible hypercalls are defined: + +* PV_TIME_FEATURES: 0xC5000020 +* PV_TIME_ST: 0xC5000021 + +These are only available in the SMC64/HVC64 calling convention as +paravirtualized time is not available to 32 bit Arm guests. The existence of +the PV_TIME_FEATURES hypercall should be probed using the SMCCC 1.1 +ARCH_FEATURES mechanism before calling it. + +PV_TIME_FEATURES + + ============= ======== ================================================= + Function ID: (uint32) 0xC5000020 + PV_call_id: (uint32) The function to query for support. + Currently only PV_TIME_ST is supported. + Return value: (int64) NOT_SUPPORTED (-1) or SUCCESS (0) if the relevant + PV-time feature is supported by the hypervisor. + ============= ======== ================================================= + +PV_TIME_ST + + ============= ======== ============================================== + Function ID: (uint32) 0xC5000021 + Return value: (int64) IPA of the stolen time data structure for this + VCPU. On failure: + NOT_SUPPORTED (-1) + ============= ======== ============================================== + +The IPA returned by PV_TIME_ST should be mapped by the guest as normal memory +with inner and outer write back caching attributes, in the inner shareable +domain. A total of 16 bytes from the IPA returned are guaranteed to be +meaningfully filled by the hypervisor (see structure below). + +PV_TIME_ST returns the structure for the calling VCPU. + +Stolen Time +----------- + +The structure pointed to by the PV_TIME_ST hypercall is as follows: + ++-------------+-------------+-------------+----------------------------+ +| Field | Byte Length | Byte Offset | Description | ++=============+=============+=============+============================+ +| Revision | 4 | 0 | Must be 0 for version 1.0 | ++-------------+-------------+-------------+----------------------------+ +| Attributes | 4 | 4 | Must be 0 | ++-------------+-------------+-------------+----------------------------+ +| Stolen time | 8 | 8 | Stolen time in unsigned | +| | | | nanoseconds indicating how | +| | | | much time this VCPU thread | +| | | | was involuntarily not | +| | | | running on a physical CPU. | ++-------------+-------------+-------------+----------------------------+ + +All values in the structure are stored little-endian. + +The structure will be updated by the hypervisor prior to scheduling a VCPU. It +will be present within a reserved region of the normal memory given to the +guest. The guest should not attempt to write into this memory. There is a +structure per VCPU of the guest. + +It is advisable that one or more 64k pages are set aside for the purpose of +these structures and not used for other purposes, this enables the guest to map +the region using 64k pages and avoids conflicting attributes with other memory. + +For the user space interface see +:ref:`Documentation/virt/kvm/devices/vcpu.rst <kvm_arm_vcpu_pvtime_ctrl>`.
\ No newline at end of file |