diff options
Diffstat (limited to 'arch/arc/include/asm/entry-arcv2.h')
| -rw-r--r-- | arch/arc/include/asm/entry-arcv2.h | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h new file mode 100644 index 0000000000..4d13320e0c --- /dev/null +++ b/arch/arc/include/asm/entry-arcv2.h @@ -0,0 +1,294 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __ASM_ARC_ENTRY_ARCV2_H +#define __ASM_ARC_ENTRY_ARCV2_H + +#include <asm/asm-offsets.h> +#include <asm/dsp-impl.h> +#include <asm/irqflags-arcv2.h> +#include <asm/thread_info.h> /* For THREAD_SIZE */ + +/* + * Interrupt/Exception stack layout (pt_regs) for ARCv2 + * (End of struct aligned to end of page [unless nested]) + * + * INTERRUPT EXCEPTION + * + * manual --------------------- manual + * | orig_r0 | + * | event/ECR | + * | bta | + * | gp | + * | fp | + * | sp | + * | r12 | + * | r30 | + * | r58 | + * | r59 | + * hw autosave --------------------- + * optional | r0 | + * | r1 | + * ~ ~ + * | r9 | + * | r10 | + * | r11 | + * | blink | + * | lpe | + * | lps | + * | lpc | + * | ei base | + * | ldi base | + * | jli base | + * --------------------- + * hw autosave | pc / eret | + * mandatory | stat32 / erstatus | + * --------------------- + */ + +/*------------------------------------------------------------------------*/ +.macro INTERRUPT_PROLOGUE + + ; Before jumping to Interrupt Vector, hardware micro-ops did following: + ; 1. SP auto-switched to kernel mode stack + ; 2. STATUS32.Z flag set if in U mode at time of interrupt (U:1,K:0) + ; 3. Auto save: (mandatory) Push PC and STAT32 on stack + ; hardware does even if CONFIG_ARC_IRQ_NO_AUTOSAVE + ; 4a. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI + ; + ; Now + ; 4b. If Auto-save (optional) not enabled in hw, manually save them + ; 5. Manually save: r12,r30, sp,fp,gp, ACCL pair + ; + ; At the end, SP points to pt_regs + +#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE + ; carve pt_regs on stack (case #3), PC/STAT32 already on stack + sub sp, sp, SZ_PT_REGS - 8 + + __SAVE_REGFILE_HARD +#else + ; carve pt_regs on stack (case #4), which grew partially already + sub sp, sp, PT_r0 +#endif + + __SAVE_REGFILE_SOFT +.endm + +/*------------------------------------------------------------------------*/ +.macro EXCEPTION_PROLOGUE_KEEP_AE + + ; Before jumping to Exception Vector, hardware micro-ops did following: + ; 1. SP auto-switched to kernel mode stack + ; 2. STATUS32.Z flag set if in U mode at time of exception (U:1,K:0) + ; + ; Now manually save rest of reg file + ; At the end, SP points to pt_regs + + sub sp, sp, SZ_PT_REGS ; carve space for pt_regs + + ; _HARD saves r10 clobbered by _SOFT as scratch hence comes first + + __SAVE_REGFILE_HARD + __SAVE_REGFILE_SOFT + + st r0, [sp] ; orig_r0 + + lr r10, [eret] + lr r11, [erstatus] + ST2 r10, r11, PT_ret + + lr r10, [ecr] + lr r11, [erbta] + ST2 r10, r11, PT_event + + ; OUTPUT: r10 has ECR expected by EV_Trap +.endm + +.macro EXCEPTION_PROLOGUE + + EXCEPTION_PROLOGUE_KEEP_AE ; return ECR in r10 + + lr r0, [efa] + mov r1, sp + + FAKE_RET_FROM_EXCPN ; clobbers r9 +.endm + +/*------------------------------------------------------------------------ + * This macro saves the registers manually which would normally be autosaved + * by hardware on taken interrupts. It is used by + * - exception handlers (which don't have autosave) + * - interrupt autosave disabled due to CONFIG_ARC_IRQ_NO_AUTOSAVE + */ +.macro __SAVE_REGFILE_HARD + + ST2 r0, r1, PT_r0 + ST2 r2, r3, PT_r2 + ST2 r4, r5, PT_r4 + ST2 r6, r7, PT_r6 + ST2 r8, r9, PT_r8 + ST2 r10, r11, PT_r10 + + st blink, [sp, PT_blink] + + lr r10, [lp_end] + lr r11, [lp_start] + ST2 r10, r11, PT_lpe + + st lp_count, [sp, PT_lpc] + + ; skip JLI, LDI, EI for now +.endm + +/*------------------------------------------------------------------------ + * This macros saves a bunch of other registers which can't be autosaved for + * various reasons: + * - r12: the last caller saved scratch reg since hardware saves in pairs so r0-r11 + * - r30: free reg, used by gcc as scratch + * - ACCL/ACCH pair when they exist + */ +.macro __SAVE_REGFILE_SOFT + + st fp, [sp, PT_fp] ; r27 + st r30, [sp, PT_r30] + st r12, [sp, PT_r12] + st r26, [sp, PT_r26] ; gp + + ; Saving pt_regs->sp correctly requires some extra work due to the way + ; Auto stack switch works + ; - U mode: retrieve it from AUX_USER_SP + ; - K mode: add the offset from current SP where H/w starts auto push + ; + ; 1. Utilize the fact that Z bit is set if Intr taken in U mode + ; 2. Upon entry SP is always saved (for any inspection, unwinding etc), + ; but on return, restored only if U mode + + lr r10, [AUX_USER_SP] ; U mode SP + + ; ISA requires ADD.nz to have same dest and src reg operands + mov.nz r10, sp + add2.nz r10, r10, SZ_PT_REGS/4 ; K mode SP + + st r10, [sp, PT_sp] ; SP (pt_regs->sp) + +#ifdef CONFIG_ARC_HAS_ACCL_REGS + ST2 r58, r59, PT_r58 +#endif + + /* clobbers r10, r11 registers pair */ + DSP_SAVE_REGFILE_IRQ + +#ifdef CONFIG_ARC_CURR_IN_REG + GET_CURR_TASK_ON_CPU gp +#endif + +.endm + +/*------------------------------------------------------------------------*/ +.macro __RESTORE_REGFILE_SOFT + + ld fp, [sp, PT_fp] + ld r30, [sp, PT_r30] + ld r12, [sp, PT_r12] + ld r26, [sp, PT_r26] + + ; Restore SP (into AUX_USER_SP) only if returning to U mode + ; - for K mode, it will be implicitly restored as stack is unwound + ; - Z flag set on K is inverse of what hardware does on interrupt entry + ; but that doesn't really matter + bz 1f + + ld r10, [sp, PT_sp] ; SP (pt_regs->sp) + sr r10, [AUX_USER_SP] +1: + + /* clobbers r10, r11 registers pair */ + DSP_RESTORE_REGFILE_IRQ + +#ifdef CONFIG_ARC_HAS_ACCL_REGS + LD2 r58, r59, PT_r58 +#endif +.endm + +/*------------------------------------------------------------------------*/ +.macro __RESTORE_REGFILE_HARD + + ld blink, [sp, PT_blink] + + LD2 r10, r11, PT_lpe + sr r10, [lp_end] + sr r11, [lp_start] + + ld r10, [sp, PT_lpc] ; lp_count can't be target of LD + mov lp_count, r10 + + LD2 r0, r1, PT_r0 + LD2 r2, r3, PT_r2 + LD2 r4, r5, PT_r4 + LD2 r6, r7, PT_r6 + LD2 r8, r9, PT_r8 + LD2 r10, r11, PT_r10 +.endm + + +/*------------------------------------------------------------------------*/ +.macro INTERRUPT_EPILOGUE + + ; INPUT: r0 has STAT32 of calling context + ; INPUT: Z flag set if returning to K mode + + ; _SOFT clobbers r10 restored by _HARD hence the order + + __RESTORE_REGFILE_SOFT + +#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE + __RESTORE_REGFILE_HARD + + ; SP points to PC/STAT32: hw restores them despite NO_AUTOSAVE + add sp, sp, SZ_PT_REGS - 8 +#else + add sp, sp, PT_r0 +#endif + +.endm + +/*------------------------------------------------------------------------*/ +.macro EXCEPTION_EPILOGUE + + ; INPUT: r0 has STAT32 of calling context + + btst r0, STATUS_U_BIT ; Z flag set if K, used in restoring SP + + ld r10, [sp, PT_bta] + sr r10, [erbta] + + LD2 r10, r11, PT_ret + sr r10, [eret] + sr r11, [erstatus] + + __RESTORE_REGFILE_SOFT + __RESTORE_REGFILE_HARD + + add sp, sp, SZ_PT_REGS +.endm + +.macro FAKE_RET_FROM_EXCPN + lr r9, [status32] + bclr r9, r9, STATUS_AE_BIT + bset r9, r9, STATUS_IE_BIT + kflag r9 +.endm + +/* Get thread_info of "current" tsk */ +.macro GET_CURR_THR_INFO_FROM_SP reg + bmskn \reg, sp, THREAD_SHIFT - 1 +.endm + +/* Get CPU-ID of this core */ +.macro GET_CPU_ID reg + lr \reg, [identity] + xbfu \reg, \reg, 0xE8 /* 00111 01000 */ + /* M = 8-1 N = 8 */ +.endm + +#endif |