diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp')
45 files changed, 227 insertions, 179 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi index 4aeb74479f..1ac10965fd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi @@ -68,7 +68,7 @@ interrupt-parent = <&aitc>; ranges; - aipi@200000 { + bus@200000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -155,7 +155,7 @@ }; }; - aipi@210000 { + bus@210000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts index e93bf3b711..dd176fb54e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts @@ -122,6 +122,7 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; clocks = <&clks 129>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi index f65c7234f9..9cfff2151b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi @@ -68,6 +68,16 @@ }; }; + usbphy0: usb-phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + usbphy1: usb-phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -93,7 +103,7 @@ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; reg = <0x43f80000 0x4000>; clocks = <&clks 48>; - clock-names = ""; + clock-names = "ipg"; interrupts = <3>; status = "disabled"; }; @@ -104,7 +114,7 @@ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; reg = <0x43f84000 0x4000>; clocks = <&clks 48>; - clock-names = ""; + clock-names = "ipg"; interrupts = <10>; status = "disabled"; }; @@ -151,7 +161,7 @@ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; reg = <0x43f98000 0x4000>; clocks = <&clks 48>; - clock-names = ""; + clock-names = "ipg"; interrupts = <4>; status = "disabled"; }; @@ -178,12 +188,9 @@ }; kpp: kpp@43fa8000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; clocks = <&clks 102>; - clock-names = ""; interrupts = <24>; status = "disabled"; }; @@ -597,7 +604,7 @@ #size-cells = <1>; }; - emi@80000000 { + bus@80000000 { compatible = "fsl,emi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -617,22 +624,4 @@ }; }; }; - - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usb-phy@0 { - reg = <0>; - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - - usbphy1: usb-phy@1 { - reg = <1>; - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts index 35123b7cb6..21d436972a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts @@ -14,18 +14,12 @@ reg = <0xa0000000 0x08000000>; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX27_CLK_DUMMY>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + + usbphy0: usbphy { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "main_clk"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts index 67b235044b..b8048e12e3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts @@ -48,15 +48,12 @@ regulator-always-on; }; - usbphy { - usbphy2: usbphy@2 { - compatible = "usb-nop-xceiv"; - reg = <2>; - vcc-supply = <®_5v0>; - clocks = <&clks IMX27_CLK_DUMMY>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + usbphy2: usbphy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_5v0>; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "main_clk"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi index 8d428c8446..e958d7286a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi @@ -29,19 +29,13 @@ regulator-max-microvolt = <5000000>; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - vcc-supply = <&sw3_reg>; - clocks = <&clks IMX27_CLK_DUMMY>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + + usbphy0: usbphy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&sw3_reg>; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "main_clk"; + #phy-cells = <0>; }; }; @@ -49,12 +43,12 @@ status = "okay"; /* SSI0 <=> PINS_4 (MC13783 Audio) */ - ssi0 { + mux-ssi0 { fsl,audmux-port = <0>; fsl,port-config = <0xcb205000>; }; - pins4 { + mux-pins4 { fsl,audmux-port = <2>; fsl,port-config = <0x00001000>; }; @@ -186,7 +180,7 @@ reg = <0x52>; }; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi index cac4b3d689..ec472695c7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi @@ -81,7 +81,7 @@ interrupt-parent = <&aitc>; ranges; - aipi1: aipi@10000000 { /* AIPI1 */ + aipi1: bus@10000000 { /* AIPI1 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -453,7 +453,7 @@ }; }; - aipi2: aipi@10020000 { /* AIPI2 */ + aipi2: bus@10020000 { /* AIPI2 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts index 055d23a9ae..0814f5665a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts @@ -22,7 +22,7 @@ }; display-0 { - #address-cells =<1>; + #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts index 7d4ae113c3..63cdf24eb3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts @@ -22,7 +22,7 @@ compatible = "ilitek,ili251x"; reg = <0x41>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts index 9c5938e16d..2e75d700ef 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts @@ -22,7 +22,7 @@ compatible = "ilitek,ili251x"; reg = <0x41>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts index 01df7cffce..94625d5d59 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts @@ -22,7 +22,7 @@ compatible = "eeti,exc80h60"; reg = <0x2a>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts index a015453daf..b3cfa8110a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts @@ -22,7 +22,7 @@ compatible = "eeti,exc80h60"; reg = <0x2a>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts index b71ee6b792..7edc788bcb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts @@ -22,7 +22,7 @@ compatible = "eeti,exc80h84"; reg = <0x2a>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; touchscreen-inverted-x; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts index 6f9d094dd6..18a620832a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts @@ -16,7 +16,7 @@ compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q"; panel0: lvds-panel0 { - compatible = "panel-lvds"; + compatible = "panel-lvds"; backlight = <&backlight_lvds>; width-mm = <152>; height-mm = <91>; @@ -43,7 +43,7 @@ }; panel1: lvds-panel1 { - compatible = "panel-lvds"; + compatible = "panel-lvds"; width-mm = <152>; height-mm = <91>; data-mapping = "jeida-18"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index dcb4f6a32f..ea40623d12 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -12,6 +12,13 @@ model = "Toradex Apalis iMX6Q/D Module"; compatible = "toradex,apalis_imx6q", "fsl,imx6q"; + aliases { + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC1 slot */ + mmc2 = &usdhc2; /* SD1 slot */ + /delete-property/ mmc3; + }; + /* Will be filled by the bootloader */ memory@10000000 { device_type = "memory"; @@ -166,7 +173,7 @@ reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 6cc4d6fd5f..d3a7a6eeb8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -12,6 +12,13 @@ model = "Toradex Colibri iMX6DL/S Module"; compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; + aliases { + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC/SD Slot */ + /delete-property/ mmc2; + /delete-property/ mmc3; + }; + backlight: backlight { compatible = "pwm-backlight"; brightness-levels = <0 45 63 88 119 158 203 255>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi index f1a41c7672..5587069b60 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi @@ -54,7 +54,7 @@ clk_codec: clock-codec { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <12000000>; + clock-frequency = <12000000>; }; sound { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi index da0f8dae1e..4d2abcd44e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi @@ -500,21 +500,21 @@ pinctrl_pwm1: pwm1grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050 >; }; pinctrl_pwm4: pwm4grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050 >; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi index b81799d707..596b3bb3dd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi @@ -25,7 +25,7 @@ compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_touch>; - pinctrl-names ="default"; + pinctrl-names = "default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi index bda182edc5..81142c523f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi @@ -475,7 +475,7 @@ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index f6b35923ad..df3a375f0a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -418,7 +418,7 @@ <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; status = "okay"; }; @@ -1010,7 +1010,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -1024,7 +1024,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -1038,7 +1038,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi index 3b87d980e9..a27a7554c2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi @@ -364,7 +364,7 @@ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi index 3fdece5bd3..5248a05823 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi @@ -805,6 +805,7 @@ &pinctrl_usb_pwr>; dr_mode = "host"; power-active-high; + over-current-active-low; disable-over-current; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi index fe42b0a468..3fc3130f9d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi @@ -128,11 +128,16 @@ }; }; - /* NXP SE97BTP with temperature sensor + eeprom */ + /* LM75A temperature sensor, TQMa7x 01xx */ + lm75a: temperature-sensor@48 { + compatible = "national,lm75a"; + reg = <0x48>; + }; + + /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */ se97b: temperature-sensor-eeprom@1e { compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1e>; - status = "okay"; }; /* ST M24C64 */ diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi index 3740e34ef9..9670f45eab 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi @@ -11,6 +11,10 @@ /* Required to properly pass MAC addresses from bootloader. */ ethernet0 = &fec1; ethernet1 = &fec2; + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC/SD slot */ + /delete-property/ mmc2; + /delete-property/ mmc3; }; memory@80000000 { diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts index dd8003bd1f..f0fda15f30 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts @@ -212,7 +212,7 @@ keep-power-in-suspend; wakeup-source; vmmc-supply = <®_wlreg_on>; - vqmmc-supply =<®_3p3v>; + vqmmc-supply = <®_3p3v>; status = "okay"; brcmf: wifi@1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi index c5eefe89cd..8d5037ac03 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi @@ -108,6 +108,14 @@ assigned-clock-rates = <0>, <32768>; }; +&cpu0 { + cpu-supply = <&sw1a_reg>; +}; + +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &ecspi3 { cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts index 85b97b5f64..7ed27c7ad7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts @@ -149,7 +149,7 @@ &i2c2 { pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_i2c2>; + pinctrl-0 = <&pinctrl_i2c2>; clock-frequency = <100000>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index ba7231b364..7bab113ca6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -210,6 +210,7 @@ remote-endpoint = <&mipi_from_sensor>; clock-lanes = <0>; data-lanes = <1>; + link-frequencies = /bits/ 64 <330000000>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi index 4569d2b8ed..9c81c6baa2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi @@ -183,6 +183,15 @@ interrupt-parent = <&gpc>; ranges; + ocram: sram@900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clks IMX7D_OCRAM_CLK>; + }; + funnel@30041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30041000 0x1000>; @@ -609,6 +618,7 @@ nvmem-cells = <&tempmon_calib>, <&fuse_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + #thermal-sensor-cells = <0>; }; }; @@ -724,6 +734,8 @@ clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, <&clks IMX7D_ECSPI4_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 6 7 1>, <&sdma 7 7 2>; status = "disabled"; }; @@ -854,6 +866,26 @@ }; }; }; + + mipi_dsi: dsi@30760000 { + compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30760000 0x400>; + clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>, + <&clks IMX7D_PLL_SYS_PFD5_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>; + assigned-clock-rates = <0>, <333000000>; + power-domains = <&pgc_mipi_phy>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + samsung,burst-clock-frequency = <891000000>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <24000000>; + status = "disabled"; + }; }; aips3: bus@30800000 { @@ -879,6 +911,8 @@ clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, <&clks IMX7D_ECSPI1_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 0 7 1>, <&sdma 1 7 2>; status = "disabled"; }; @@ -891,6 +925,8 @@ clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, <&clks IMX7D_ECSPI2_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 2 7 1>, <&sdma 3 7 2>; status = "disabled"; }; @@ -903,6 +939,8 @@ clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, <&clks IMX7D_ECSPI3_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 4 7 1>, <&sdma 5 7 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi index 5a8b867d7d..e78d0a7d8c 100644 --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi @@ -467,7 +467,7 @@ pinctrl_pwm2: pwm2grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 >; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi index 9cf09c183b..6dd73290f0 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi @@ -74,7 +74,7 @@ sct_pwm: pwm@40000000 { compatible = "nxp,lpc1850-sct-pwm"; reg = <0x40000000 0x1000>; - clocks =<&ccu1 CLK_CPU_SCT>; + clocks = <&ccu1 CLK_CPU_SCT>; clock-names = "pwm"; resets = <&rgu 37>; #pwm-cells = <3>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi index 49c78c84cd..d471cc5efa 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi +++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi @@ -112,7 +112,7 @@ compatible = "fsl,ls1021a-msi"; reg = <0x0 0x1570e00 0x0 0x8>; msi-controller; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; }; msi2: msi-controller@1570e08 { diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi index 9cba1d0224..0309592af1 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi @@ -110,7 +110,7 @@ reg = <0x80018000 0x2000>; gpio0: gpio@0 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx23-gpio"; reg = <0>; interrupts = <16>; gpio-controller; @@ -120,7 +120,7 @@ }; gpio1: gpio@1 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx23-gpio"; reg = <1>; interrupts = <17>; gpio-controller; @@ -130,7 +130,7 @@ }; gpio2: gpio@2 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx23-gpio"; reg = <2>; interrupts = <18>; gpio-controller; @@ -484,7 +484,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl", "fsl,clkctrl"; + compatible = "fsl,imx23-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi index bb971e660d..69fcb0dde9 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi @@ -18,6 +18,7 @@ memory@40000000 { reg = <0x40000000 0x08000000>; + device_type = "memory"; }; reg_3v3: regulator-reg-3v3 { diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts index 153e401795..5485fe118d 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts @@ -260,6 +260,7 @@ sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; clocks = <&mclk>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi index 37b9d409a5..4817fba2d9 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi @@ -164,7 +164,7 @@ reg = <0x80018000 0x2000>; gpio0: gpio@0 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <0>; interrupts = <127>; gpio-controller; @@ -174,7 +174,7 @@ }; gpio1: gpio@1 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <1>; interrupts = <126>; gpio-controller; @@ -184,7 +184,7 @@ }; gpio2: gpio@2 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <2>; interrupts = <125>; gpio-controller; @@ -194,7 +194,7 @@ }; gpio3: gpio@3 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <3>; interrupts = <124>; gpio-controller; @@ -204,7 +204,7 @@ }; gpio4: gpio@4 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <4>; interrupts = <123>; gpio-controller; @@ -1100,7 +1100,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl", "fsl,clkctrl"; + compatible = "fsl,imx28-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi index 14c411f146..5a19da9313 100644 --- a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi @@ -55,7 +55,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <®_3v3>; - status = "okay"; + status = "okay"; }; &dcu0 { diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts index e4f691d601..722182f5fd 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts @@ -68,7 +68,7 @@ #address-cells = <1>; #size-cells = <0>; /* PTD12 ->RPIO[91] */ - sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; /* PTD10 ->RPIO[89] */ miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; num-chipselects = <0>; @@ -79,7 +79,7 @@ gpio-controller; #gpio-cells = <2>; /* PTB18 -> RGPIO[40] */ - load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; spi-max-frequency = <100000>; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 1a19aec895..7e72f860c3 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -162,7 +162,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6085"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; @@ -173,26 +173,26 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "eth_cu_1000_1"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_2"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -200,7 +200,7 @@ sfp = <&sff>; }; - port@6 { + ethernet-port@6 { reg = <6>; phy-mode = "rmii"; ethernet = <&fec1>; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts index a248b8a453..029f49be40 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts @@ -294,11 +294,11 @@ pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW - &gpio1 8 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW + &gpio1 8 GPIO_ACTIVE_HIGH>; num-chipselects = <2>; flash@0 { diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index df1335492a..77492eeea4 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -47,17 +47,17 @@ #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -68,37 +68,37 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "aib2main_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "aib2main_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_5"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_6"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_7"; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "modem_pic"; @@ -108,7 +108,7 @@ }; }; - switch0port10: port@10 { + switch0port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -130,32 +130,32 @@ #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_100_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_100_3"; }; - switch1port9: port@9 { + switch1port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "xgmii"; @@ -168,7 +168,7 @@ }; }; - switch1port10: port@10 { + switch1port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -188,17 +188,17 @@ #address-cells = <1>; #size-cells = <0>; - switch2: switch2@0 { + switch2: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 2>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_2"; phy-mode = "1000base-x"; @@ -206,7 +206,7 @@ sfp = <&sff1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_3"; phy-mode = "1000base-x"; @@ -214,7 +214,7 @@ sfp = <&sff2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_4"; phy-mode = "1000base-x"; @@ -222,7 +222,7 @@ sfp = <&sff3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_5"; phy-mode = "1000base-x"; @@ -230,7 +230,7 @@ sfp = <&sff4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_fc_1000_6"; phy-mode = "1000base-x"; @@ -238,7 +238,7 @@ sfp = <&sff5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "eth_fc_1000_7"; phy-mode = "1000base-x"; @@ -246,7 +246,7 @@ sfp = <&sff6>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -254,7 +254,7 @@ sfp = <&sff0>; }; - switch2port10: port@10 { + switch2port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "2500base-x"; @@ -276,17 +276,17 @@ #address-cells = <1>; #size-cells = <0>; - switch3: switch3@0 { + switch3: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 3>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_8"; phy-mode = "1000base-x"; @@ -294,7 +294,7 @@ sfp = <&sff7>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_9"; phy-mode = "1000base-x"; @@ -302,7 +302,7 @@ sfp = <&sff8>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_10"; phy-mode = "1000base-x"; @@ -310,7 +310,7 @@ sfp = <&sff9>; }; - switch3port9: port@9 { + switch3port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "2500base-x"; @@ -322,7 +322,7 @@ }; }; - switch3port10: port@10 { + switch3port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 1461804eca..2a49046466 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -123,7 +123,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -134,11 +134,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -149,32 +149,32 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 463c2452b9..078d8699e1 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -112,7 +112,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -123,11 +123,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -138,27 +138,27 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_100_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_5"; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "eth_cu_1000_1"; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_cu_1000_2"; phy-handle = <&phy9>; @@ -167,12 +167,12 @@ }; }; - mdio1 { + mdio-external { compatible = "marvell,mv88e6xxx-mdio-external"; #address-cells = <1>; #size-cells = <0>; - phy9: phy9@0 { + phy9: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; pinctrl-0 = <&pinctrl_gpio_phy9>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index f5ae0d5de3..22c8f44390 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -137,7 +137,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -148,11 +148,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -163,32 +163,32 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; |