diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp')
33 files changed, 1326 insertions, 386 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index a724d1a7a9..4052cad859 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -45,7 +45,9 @@ dtb-$(CONFIG_SOC_IMX53) += \ imx53-mba53.dtb \ imx53-ppd.dtb \ imx53-qsb.dtb \ + imx53-qsb-hdmi.dtb \ imx53-qsrb.dtb \ + imx53-qsrb-hdmi.dtb \ imx53-sk-imx53.dtb \ imx53-sk-imx53-atm0700d4-lvds.dtb \ imx53-sk-imx53-atm0700d4-rgb.dtb \ @@ -54,6 +56,8 @@ dtb-$(CONFIG_SOC_IMX53) += \ imx53-tx53-x13x.dtb \ imx53-usbarmory.dtb \ imx53-voipac-bsb.dtb +imx53-qsb-hdmi-dtbs := imx53-qsb.dtb imx53-qsb-hdmi.dtbo +imx53-qsrb-hdmi-dtbs := imx53-qsrb.dtb imx53-qsb-hdmi.dtbo dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-alti6p.dtb \ imx6dl-apf6dev.dtb \ @@ -118,6 +122,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ imx6dl-savageboard.dtb \ + imx6dl-sielaff.dtb \ imx6dl-skov-revc-lt2.dtb \ imx6dl-skov-revc-lt6.dtb \ imx6dl-solidsense.dtb \ @@ -147,6 +152,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-yapp4-phoenix.dtb \ imx6dl-yapp4-ursa.dtb \ imx6q-apalis-eval.dtb \ + imx6q-apalis-eval-v1.2.dtb \ imx6q-apalis-ixora.dtb \ imx6q-apalis-ixora-v1.1.dtb \ imx6q-apalis-ixora-v1.2.dtb \ diff --git a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts index e66eef87a7..058e943552 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts +++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts @@ -54,7 +54,7 @@ #size-cells = <1>; }; - eth: eth@4,c00000 { + eth: ethernet@4,c00000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eth>; compatible = "davicom,dm9000"; diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi index 1ac10965fd..389ecb1ebf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi @@ -251,7 +251,7 @@ }; }; - weim: weim@220000 { + weim: memory-controller@220000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx1-weim"; diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi index ec472695c7..ec3ccc8f40 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi @@ -568,7 +568,7 @@ status = "disabled"; }; - weim: weim@d8002000 { + weim: memory-controller@d8002000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx27-weim"; diff --git a/arch/arm/boot/dts/nxp/imx/imx31.dtsi b/arch/arm/boot/dts/nxp/imx/imx31.dtsi index e1ae7c175f..00006c90d9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx31.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx31.dtsi @@ -352,7 +352,7 @@ status = "disabled"; }; - weim: weim@b8002000 { + weim: memory-controller@b8002000 { compatible = "fsl,imx31-weim", "fsl,imx27-weim"; reg = <0xb8002000 0x1000>; clocks = <&clks 56>; diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi index 2d20e5541a..442dc15677 100644 --- a/arch/arm/boot/dts/nxp/imx/imx35.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi @@ -374,7 +374,7 @@ status = "disabled"; }; - weim: weim@b8002000 { + weim: memory-controller@b8002000 { #address-cells = <2>; #size-cells = <1>; clocks = <&clks 0>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51.dtsi index c96d6311df..4efce49022 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx51.dtsi @@ -578,7 +578,7 @@ reg = <0x83fd8000 0x1000>; }; - weim: weim@83fda000 { + weim: memory-controller@83fda000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx51-weim"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi index d804404464..05d7a462ea 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi @@ -85,7 +85,7 @@ }; }; - panel { + panel_dpi: panel { compatible = "sii,43wvf1g"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_display_power>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso new file mode 100644 index 0000000000..151e9cee3c --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * DT overlay for MCIMXHDMICARD as used with the iMX53 QSB or QSRB boards + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/dts-v1/; +/plugin/; + +&{/} { + hdmi: connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&sii9022_out>; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "1P2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + vin-supply = <®_3p2v>; + }; +}; + +&display0 { + status = "okay"; +}; + +&display0 { + port@1 { + display0_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + sii9022: bridge-hdmi@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>; + iovcc-supply = <®_3p2v>; + #sound-dai-cells = <0>; + sil,i2s-data-lanes = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&display0_out>; + }; + }; + + port@1 { + reg = <1>; + + sii9022_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; + +&panel_dpi { + status = "disabled"; +}; + +&tve { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts new file mode 100644 index 0000000000..7de8d5f265 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts @@ -0,0 +1,533 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2022 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include <dt-bindings/clock/imx6qdl-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Sielaff i.MX6 Solo"; + compatible = "sielaff,imx6dl-board", "fsl,imx6dl"; + + chosen { + stdout-path = &uart2; + }; + + backlight: pwm-backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm3 0 50000 0>; + brightness-levels = <0 0 64 88 112 136 184 232 255>; + default-brightness-level = <4>; + enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + power-supply = <®_backlight>; + }; + + cec { + compatible = "cec-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; + cec-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + hdmi-phandle = <&hdmi>; + }; + + enet_ref: clock-enet-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "enet-ref"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-0 { + gpios = <&gpio2 16 0>; + debounce-interval = <10>; + linux,code = <1>; + }; + + key-1 { + gpios = <&gpio3 27 0>; + debounce-interval = <10>; + linux,code = <2>; + }; + + key-2 { + gpios = <&gpio5 4 0>; + debounce-interval = <10>; + linux,code = <3>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-debug { + label = "debug-led"; + gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + device_type = "memory"; + }; + + osc_eth_phy: clock-osc-eth-phy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "osc-eth-phy"; + }; + + panel { + compatible = "lg,lb070wv8"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out>; + }; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_backlight>; + enable-active-high; + gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + regulator-name = "backlight"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usbotg_vbus>; + enable-active-high; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + /* + * Set PTP clock to external instead of internal reference, as the + * REF_CLK from the PHY is fed back into the i.MX6 and the GPR + * register needs to be set accordingly (see mach-imx6q.c). + */ + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&enet_ref>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-connection-type = "rmii"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + clocks = <&osc_eth_phy>; + clock-names = "rmii-ref"; + micrel,led-mode = <1>; + reset-assert-us = <500>; + reset-deassert-us = <100>; + reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "key-out", "key-in", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "lan9500a-rst", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c4>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; + + touchscreen@55 { + compatible = "sitronix,st1633"; + reg = <0x55>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio5>; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + touchscreen@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio5>; + irq-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clock-frequency = <100000>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds_out: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + disable-over-current; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + usb1@1 { + compatible = "usb4b4,6570"; + reg = <1>; + clocks = <&clks IMX6QDL_CLK_CKO>; + + assigned-clocks = <&clks IMX6QDL_CLK_CKO>, + <&clks IMX6QDL_CLK_CKO2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>, + <&clks IMX6QDL_CLK_OSC>; + assigned-clock-rates = <12000000 0>; + }; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "host"; + over-current-active-low; + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x1b0b0 /* PMIC_IRQ */ + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b1 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b080 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b080 + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b080 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x1b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001f8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_backlight: regbacklightgrp { + fsl,pins = < + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b1 + >; + }; + + pinctrl_reg_usbotg_vbus: regusbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b1 + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x100b1 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts new file mode 100644 index 0000000000..15d4a98ee9 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +/dts-v1/; + +#include "imx6q-apalis-eval.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2"; + compatible = "toradex,apalis_imx6q-eval-v1.2", "toradex,apalis_imx6q", + "fsl,imx6q"; + + reg_3v3_mmc: regulator-3v3-mmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_mmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_MMC"; + startup-delay-us = <10000>; + }; + + reg_3v3_sd: regulator-3v3-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_sd>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SD"; + startup-delay-us = <10000>; + }; + + reg_can1: regulator-can1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can1_power>; + regulator-name = "5V_SW_CAN1"; + startup-delay-us = <10000>; + }; + + reg_can2: regulator-can2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can2_power>; + regulator-name = "5V_SW_CAN2"; + startup-delay-us = <10000>; + }; + + sound-carrier { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,name = "apalis-nau8822"; + simple-audio-card,routing = + "Headphones", "LHP", + "Headphones", "RHP", + "Speaker", "LSPK", + "Speaker", "RSPK", + "Line Out", "AUXOUT1", + "Line Out", "AUXOUT2", + "LAUX", "Line In", + "RAUX", "Line In", + "LMICP", "Mic In", + "RMICP", "Mic In"; + simple-audio-card,widgets = + "Headphones", "Headphones", + "Line Out", "Line Out", + "Speaker", "Speaker", + "Microphone", "Mic In", + "Line", "Line In"; + + codec_dai: simple-audio-card,codec { + sound-dai = <&nau8822_1a>; + system-clock-frequency = <12288000>; + }; + + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + }; +}; + +&can1 { + xceiver-supply = <®_can1>; + status = "okay"; +}; + +&can2 { + xceiver-supply = <®_can2>; + status = "okay"; +}; + +/* I2C1_SDA/SCL on MXM3 209/211 */ +&i2c1 { + /* Audio Codec */ + nau8822_1a: audio-codec@1a { + compatible = "nuvoton,nau8822"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nau8822>; + #sound-dai-cells = <0>; + }; + + /* Current measurement into module VCC */ + hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + + /* Temperature Sensor */ + temperature-sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + size = <256>; + }; +}; + +&pcie { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +/* MMC1 */ +&usdhc1 { + bus-width = <4>; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>; + vmmc-supply = <®_3v3_mmc>; + status = "okay"; +}; + +/* SD1 */ +&usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; + vmmc-supply = <®_3v3_sd>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enable_3v3_mmc: enable3v3mmcgrp { + fsl,pins = < + /* MMC1_PWR_CTRL */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + >; + }; + + pinctrl_enable_3v3_sd: enable3v3sdgrp { + fsl,pins = < + /* SD1_PWR_CTRL */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + >; + }; + + pinctrl_enable_can1_power: enablecan1powergrp { + fsl,pins = < + /* CAN1_PWR_EN */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + >; + }; + + pinctrl_enable_can2_power: enablecan2powergrp { + fsl,pins = < + /* CAN2_PWR_EN */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; + + pinctrl_nau8822: nau8822grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts index 3fc079dfd6..e1077e2da5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts @@ -7,29 +7,13 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include "imx6q.dtsi" -#include "imx6qdl-apalis.dtsi" +#include "imx6q-apalis-eval.dtsi" / { model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board"; compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q", "fsl,imx6q"; - aliases { - i2c0 = &i2c1; - i2c1 = &i2c3; - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - reg_pcie_switch: regulator-pcie-switch { compatible = "regulator-fixed"; enable-active-high; @@ -40,14 +24,6 @@ startup-delay-us = <100000>; status = "okay"; }; - - reg_3v3_sw: regulator-3v3-sw { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "3.3V_SW"; - }; }; &can1 { @@ -62,102 +38,22 @@ /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { - status = "okay"; - + /* PCIe Switch */ pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; }; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -/* - * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier - * board) - */ -&i2c3 { - status = "okay"; }; &pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - /* active-high meaning opposite of regular PERST# active-low polarity */ - reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - reset-gpio-active-high; vpcie-supply = <®_pcie_switch>; status = "okay"; }; -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&pwm4 { - status = "okay"; -}; - -®_usb_host_vbus { - status = "okay"; -}; - -®_usb_otg_vbus { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - &sound_spdif { status = "okay"; }; -&spdif { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usbh1 { - disable-over-current; - vbus-supply = <®_usb_host_vbus>; - status = "okay"; -}; - -&usbotg { - disable-over-current; - vbus-supply = <®_usb_otg_vbus>; - status = "okay"; -}; - /* MMC1 */ &usdhc1 { status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi new file mode 100644 index 0000000000..b6c45ad3f4 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2014-2024 Toradex + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6q.dtsi" +#include "imx6qdl-apalis.dtsi" + +/ { + aliases { + i2c0 = &i2c1; + i2c1 = &i2c3; + i2c2 = &i2c2; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_3v3_sw: regulator-3v3-sw { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SW"; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* + * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier + * board) + */ +&i2c3 { + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; + /* active-high meaning opposite of regular PERST# active-low polarity */ + reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpio-active-high; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +®_usb_otg_vbus { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + disable-over-current; + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + disable-over-current; + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi index bfade71490..a955c77cd4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi @@ -41,6 +41,11 @@ #include <dt-bindings/sound/fsl-imx-audmux.h> / { + aliases { + rtc0 = &carrier_rtc; + rtc1 = &snvs_rtc; + }; + /* Will be filled by the bootloader */ memory@10000000 { device_type = "memory"; @@ -187,7 +192,7 @@ status = "okay"; /* Pro baseboard model */ - rtc@68 { + carrier_rtc: rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi index 0883ef99cd..e6017f9bf6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi @@ -41,6 +41,11 @@ #include <dt-bindings/sound/fsl-imx-audmux.h> / { + aliases { + rtc0 = &pcf8523; + rtc1 = &snvs_rtc; + }; + /* Will be filled by the bootloader */ memory@10000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi index 2731faede1..d59d5d0e1d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi @@ -13,10 +13,14 @@ aliases { can0 = &can1; can1 = &can2; + ethernet0 = &fec; + ethernet1 = &lan1; + ethernet2 = &lan2; mdio-gpio0 = &mdio; nand = &gpmi; rtc0 = &i2c_rtc; rtc1 = &snvs; + switch0 = &switch; usb0 = &usbh1; usb1 = &usbotg; }; @@ -60,7 +64,7 @@ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>, <&gpio1 22 GPIO_ACTIVE_HIGH>; - switch@0 { + switch: switch@0 { compatible = "microchip,ksz8873"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; @@ -73,13 +77,13 @@ #address-cells = <1>; #size-cells = <0>; - ports@0 { + lan1: ports@0 { reg = <0>; phy-mode = "internal"; label = "lan1"; }; - ports@1 { + lan2: ports@1 { reg = <1>; phy-mode = "internal"; label = "lan2"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi index 81142c523f..8431b8a994 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi @@ -1158,7 +1158,7 @@ status = "disabled"; }; - weim: weim@21b8000 { + weim: memory-controller@21b8000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx6q-weim"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts index 815119c12b..5636fb3661 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts @@ -141,8 +141,10 @@ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&ldo1_reg>; reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; - x-size = <1072>; - y-size = <1448>; + touchscreen-size-x = <1072>; + touchscreen-size-y = <1448>; + touchscreen-swapped-x-y; + touchscreen-inverted-x; }; /* TODO: TPS65185 PMIC for E Ink at 0x68 */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi index 28111efb19..6aa61235e3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi @@ -949,7 +949,7 @@ clocks = <&clks IMX6SL_CLK_DUMMY>; }; - weim: weim@21b8000 { + weim: memory-controller@21b8000 { #address-cells = <2>; #size-cells = <1>; reg = <0x021b8000 0x4000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index df3a375f0a..0de359d62a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -1107,7 +1107,7 @@ status = "disabled"; }; - weim: weim@21b8000 { + weim: memory-controller@21b8000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi index 2ac40d6942..f10f052549 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi @@ -321,7 +321,7 @@ &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; measure-delay-time = <0xffff>; pre-charge-time = <0xfff>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts index 875ae699c5..2ca18f3dad 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts @@ -203,7 +203,7 @@ &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; &sai2 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi index 18cac19aa9..af337f18a2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi @@ -156,7 +156,7 @@ &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; measure-delay-time = <0xffff>; pre-charge-time = <0xffff>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi index a27a7554c2..235aa67661 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi @@ -370,7 +370,7 @@ }; }; - tsc: tsc@2040000 { + tsc: touchscreen@2040000 { compatible = "fsl,imx6ul-tsc"; reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, @@ -538,6 +538,8 @@ fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 4>; fsl,magic-packet; + nvmem-cells = <&fec2_mac_addr>; + nvmem-cell-names = "mac-address"; status = "disabled"; }; @@ -638,6 +640,7 @@ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; }; }; @@ -855,7 +858,6 @@ clocks = <&clks IMX6UL_CLK_USBOH3>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; - fsl,anatop = <&anatop>; ahb-burst-config = <0x0>; tx-burst-size-dword = <0x10>; rx-burst-size-dword = <0x10>; @@ -897,6 +899,8 @@ fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 3>; fsl,magic-packet; + nvmem-cells = <&fec1_mac_addr>; + nvmem-cell-names = "mac-address"; status = "disabled"; }; @@ -975,7 +979,7 @@ clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>; }; - weim: weim@21b8000 { + weim: memory-controller@21b8000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim"; @@ -1004,6 +1008,14 @@ cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + fec1_mac_addr: mac-addr@88 { + reg = <0x88 6>; + }; + + fec2_mac_addr: mac-addr@8e { + reg = <0x8e 6>; + }; }; csi: csi@21c4000 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi index 040421f9c9..5e39f8dc13 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi @@ -14,10 +14,12 @@ */ /* - * To use usdhc1 as SD card, the WiFi node must be deleted. + * To use usdhc1 as SD card, the WiFi node must be deleted. The associated + * pwrseq node is also deleted in order to ensure that GPIO H is released. * BT is also not available, so remove BT from the UART node. */ /delete-node/ &brcmf; +/delete-node/ &usdhc1_pwrseq; /delete-node/ &bluetooth; / { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi index 830b5a5064..a74f5273f9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi @@ -52,7 +52,7 @@ }; /* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */ - /omit-if-no-ref/ usdhc1_pwrseq: usdhc1-pwrseq { + usdhc1_pwrseq: usdhc1-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */ }; @@ -273,7 +273,7 @@ pinctrl-names = "default"; pre-charge-time = <0xfff>; touchscreen-average-samples = <32>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; /* DHCOM UART1 */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi index 45315adfaa..75486e1b0c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi @@ -28,10 +28,14 @@ /* * Due to the design as a solderable SOM, there are no capacitors * below the SoC, therefore higher voltages are required. + * Due to CPU lifetime consideration of the SoC manufacturer and + * the preferred area of operation in the industrial related + * environment, set the maximum frequency for each DHCOM i.MX6ULL + * to 792MHz, as with the industrial type. */ + clock-frequency = <792000000>; operating-points = < /* kHz uV */ - 900000 1275000 792000 1250000 /* Voltage increased */ 528000 1175000 396000 1025000 @@ -39,7 +43,6 @@ >; fsl,soc-operating-points = < /* KHz uV */ - 900000 1250000 792000 1250000 /* Voltage increased */ 528000 1175000 396000 1175000 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi index 2bccd45e9f..8a1776067e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi @@ -75,7 +75,7 @@ clocks = <&clks IMX6UL_CLK_DUMMY>; }; - iomuxc_snvs: iomuxc-snvs@2290000 { + iomuxc_snvs: pinctrl@2290000 { compatible = "fsl,imx6ull-iomuxc-snvs"; reg = <0x02290000 0x4000>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi index 3df6dff773..52869e68f8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi @@ -18,6 +18,8 @@ mmc0 = &usdhc3; mmc1 = &usdhc1; /delete-property/ mmc2; + rtc0 = &ds1339; + rtc1 = &snvs_rtc; }; beeper { @@ -32,11 +34,18 @@ gpio_buttons: gpio-keys { compatible = "gpio-keys"; + /* + * NOTE: These buttons are attached to a GPIO-expander. + * Enabling wakeup-source, enables wakeup on all inputs. + * If PE_GPIO[3..6] are used as inputs, they cause a + * wakeup as well. + */ button-0 { /* #SWITCH_A */ label = "S11"; linux,code = <KEY_1>; gpios = <&pca9555 13 GPIO_ACTIVE_LOW>; + wakeup-source; }; button-1 { @@ -44,6 +53,7 @@ label = "S12"; linux,code = <KEY_2>; gpios = <&pca9555 14 GPIO_ACTIVE_LOW>; + wakeup-source; }; button-2 { @@ -51,6 +61,7 @@ label = "S13"; linux,code = <KEY_3>; gpios = <&pca9555 15 GPIO_ACTIVE_LOW>; + wakeup-source; }; }; @@ -171,6 +182,14 @@ regulator-always-on; }; + reg_vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + sound { compatible = "fsl,imx-audio-tlv320aic32x4"; model = "imx-audio-tlv320aic32x4"; @@ -198,9 +217,9 @@ &ecspi1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; + pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_ss0>; cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>, - <&gpio4 2 GPIO_ACTIVE_LOW>; + <&gpio4 2 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -214,8 +233,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; phy-supply = <®_fec1_pwdn>; phy-handle = <ðphy1_0>; fsl,magic-packet; @@ -228,10 +245,15 @@ ethphy1_0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1_phy>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <500>; }; }; }; @@ -290,13 +312,17 @@ lm75: temperature-sensor@49 { compatible = "national,lm75"; reg = <0x49>; + vs-supply = <®_vcc_3v3>; }; }; &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_recovery>; + scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; tlv320aic32x4: audio-codec@18 { @@ -319,13 +345,17 @@ interrupts = <12 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; + vcc-supply = <®_vcc_3v3>; }; }; &i2c3 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_recovery>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -334,213 +364,213 @@ pinctrl-0 = <&pinctrl_hog_mba7_1>; pinctrl_ecspi1: ecspi1grp { + fsl,pins = + <MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x7c>, + <MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x74>, + <MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x74>, + <MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x74>, + <MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x74>, + <MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x74>; + }; + + pinctrl_ecspi1_ss0: ecspi1ss0grp { fsl,pins = < - MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x7c - MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x74 - MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x74 - MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x74 - MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x74 - MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x74 + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x74 >; }; pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c - MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 - MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 - MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x74 - >; + fsl,pins = + <MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c>, + <MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74>, + <MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74>, + <MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x74>; }; pinctrl_enet1: enet1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x02 - MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x00 - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71 - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71 - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71 - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x79 - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x79 - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x79 - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 + fsl,pins = + <MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x02>, + <MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x00>, + <MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71>, + <MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71>, + <MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71>, + <MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71>, + <MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71>, + <MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71>, + <MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x79>, + <MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79>, + <MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79>, + <MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x79>, + <MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x79>, + <MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79>; + }; + + pinctrl_enet1_phy: enet1phygrp { + fsl,pins = /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */ - MX7D_PAD_ENET1_COL__GPIO7_IO15 0x40000070 + <MX7D_PAD_ENET1_COL__GPIO7_IO15 0x40000070>, /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */ - MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x40000078 - >; + <MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x40000078>; }; pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x5a - MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x52 - >; + fsl,pins = + <MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x5a>, + <MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x52>; }; pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x5a - MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x52 - >; + fsl,pins = + <MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x5a>, + <MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x52>; }; pinctrl_hog_mba7_1: hogmba71grp { - fsl,pins = < + fsl,pins = /* Limitation: WDOG2_B / WDOG2_RESET not usable */ - MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x4000007c - MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x40000074 + <MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x4000007c>, + <MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x40000074>, /* #BOOT_EN */ - MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x40000010 - >; + <MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x40000010>; }; pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000078 - MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000078 - >; + fsl,pins = + <MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000078>, + <MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000078>; + }; + + pinctrl_i2c2_recovery: i2c2recoverygrp { + fsl,pins = + <MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x40000078>, + <MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x40000078>; }; pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX7D_PAD_I2C3_SCL__I2C3_SCL 0x40000078 - MX7D_PAD_I2C3_SDA__I2C3_SDA 0x40000078 - >; + fsl,pins = + <MX7D_PAD_I2C3_SCL__I2C3_SCL 0x40000078>, + <MX7D_PAD_I2C3_SDA__I2C3_SDA 0x40000078>; + }; + + pinctrl_i2c3_recovery: i2c3recoverygrp { + fsl,pins = + <MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x40000078>, + <MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x40000078>; }; pinctrl_pca9555: pca95550grp { - fsl,pins = < - MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x78 - >; + fsl,pins = + <MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x78>; }; pinctrl_sai1: sai1grp { - fsl,pins = < - MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x11 - MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x1c - MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1c - MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x1c - - MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1c - MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x14 - MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x14 - >; + fsl,pins = + <MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x11>, + <MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x1c>, + <MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1c>, + <MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x1c>, + + <MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1c>, + <MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x14>, + <MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x14>; }; pinctrl_uart3: uart3grp { - fsl,pins = < - MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x7e - MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x76 - MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x76 - MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x7e - >; + fsl,pins = + <MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x7e>, + <MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x76>, + <MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x76>, + <MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x7e>; }; pinctrl_uart4: uart4grp { - fsl,pins = < - MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e - MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 - MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x76 - MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x7e - >; + fsl,pins = + <MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e>, + <MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76>, + <MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x76>, + <MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x7e>; }; pinctrl_uart5: uart5grp { - fsl,pins = < - MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x7e - MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x76 - >; + fsl,pins = + <MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x7e>, + <MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x76>; }; pinctrl_uart6: uart6grp { - fsl,pins = < - MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d - MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75 - MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x75 - MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x7d - >; + fsl,pins = + <MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d>, + <MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75>, + <MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x75>, + <MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x7d>; }; pinctrl_uart7: uart7grp { - fsl,pins = < - MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x7e - MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x76 - MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x76 + fsl,pins = + <MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x7e>, + <MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x76>, + <MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x76>, /* Limitation: RTS is not connected */ - MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x7e - >; + <MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x7e>; }; - pinctrl_usdhc1_gpio: usdhc1grp_gpio { - fsl,pins = < + pinctrl_usdhc1_gpio: usdhc1_gpiogrp { + fsl,pins = /* WP */ - MX7D_PAD_SD1_WP__GPIO5_IO1 0x7c + <MX7D_PAD_SD1_WP__GPIO5_IO1 0x7c>, /* CD */ - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x7c + <MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x7c>, /* VSELECT */ - MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 - >; + <MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59>; }; pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5e - MX7D_PAD_SD1_CLK__SD1_CLK 0x57 - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5e - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5a - MX7D_PAD_SD1_CLK__SD1_CLK 0x57 - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5b - MX7D_PAD_SD1_CLK__SD1_CLK 0x57 - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b - >; + fsl,pins = + <MX7D_PAD_SD1_CMD__SD1_CMD 0x5e>, + <MX7D_PAD_SD1_CLK__SD1_CLK 0x57>, + <MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5e>, + <MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e>, + <MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e>, + <MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e>; + }; + + pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp { + fsl,pins = + <MX7D_PAD_SD1_CMD__SD1_CMD 0x5a>, + <MX7D_PAD_SD1_CLK__SD1_CLK 0x57>, + <MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a>, + <MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a>, + <MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a>, + <MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a>; + }; + + pinctrl_usdhc1_200mhz: usdhc1_200mhzgrp { + fsl,pins = + <MX7D_PAD_SD1_CMD__SD1_CMD 0x5b>, + <MX7D_PAD_SD1_CLK__SD1_CLK 0x57>, + <MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b>, + <MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b>, + <MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b>, + <MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b>; }; }; &iomuxc_lpsr { pinctrl_pwm1: pwm1grp { - fsl,pins = < + fsl,pins = /* LCD_CONTRAST */ - MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x50 - >; + <MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x50>; }; pinctrl_usbotg1: usbotg1grp { - fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x5c - MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 - >; + fsl,pins = + <MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x5c>, + <MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59>; }; pinctrl_wdog1: wdog1grp { - fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30 - >; + fsl,pins = + <MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30>; }; }; @@ -560,6 +590,10 @@ status = "okay"; }; +&snvs_pwrkey { + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; @@ -605,6 +639,7 @@ }; &usbh { + disable-over-current; status = "okay"; }; @@ -630,6 +665,8 @@ vmmc-supply = <®_sd1_vmmc>; bus-width = <4>; no-1-8-v; + no-sdio; + no-mmc; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi index 3fc3130f9d..028961eb71 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi @@ -30,8 +30,11 @@ }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_recovery>; + scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; status = "okay"; @@ -109,7 +112,7 @@ }; vgen4_reg: v33 { - regulator-min-microvolt = <2850000>; + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -135,7 +138,7 @@ }; /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */ - se97b: temperature-sensor-eeprom@1e { + se97b: temperature-sensor@1e { compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1e>; }; @@ -143,15 +146,18 @@ /* ST M24C64 */ m24c64: eeprom@50 { compatible = "atmel,24c64"; + read-only; reg = <0x50>; pagesize = <32>; + vcc-supply = <&vgen4_reg>; status = "okay"; }; at24c02: eeprom@56 { - compatible = "atmel,24c02"; + compatible = "nxp,se97b", "atmel,24c02"; reg = <0x56>; pagesize = <16>; + vcc-supply = <&vgen4_reg>; status = "okay"; }; @@ -163,91 +169,89 @@ &iomuxc { pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX7D_PAD_I2C1_SDA__I2C1_SDA 0x40000078 - MX7D_PAD_I2C1_SCL__I2C1_SCL 0x40000078 - >; + fsl,pins = + <MX7D_PAD_I2C1_SDA__I2C1_SDA 0x40000078>, + <MX7D_PAD_I2C1_SCL__I2C1_SCL 0x40000078>; + }; + + pinctrl_i2c1_recovery: i2c1recoverygrp { + fsl,pins = + <MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x40000078>, + <MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x40000078>; }; pinctrl_pmic1: pmic1grp { - fsl,pins = < - MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x4000005C - >; + fsl,pins = + <MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x4000005C>; }; pinctrl_qspi: qspigrp { - fsl,pins = < - MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x5A - MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x5A - MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x5A - MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x5A - MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x11 - MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x54 - MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x54 - >; + fsl,pins = + <MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x5A>, + <MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x5A>, + <MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x5A>, + <MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x5A>, + <MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x11>, + <MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x54>, + <MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x54>; }; pinctrl_qspi_reset: qspi_resetgrp { - fsl,pins = < + fsl,pins = /* #QSPI_RESET */ - MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x52 - >; + <MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x52>; }; pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x59 - MX7D_PAD_SD3_CLK__SD3_CLK 0x56 - MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 - MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 - MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 - MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 - MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 - MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 - MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 - MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 - MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 - >; + fsl,pins = + <MX7D_PAD_SD3_CMD__SD3_CMD 0x59>, + <MX7D_PAD_SD3_CLK__SD3_CLK 0x56>, + <MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59>, + <MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59>, + <MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59>, + <MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59>, + <MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59>, + <MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59>, + <MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59>, + <MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59>, + <MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19>; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { - fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5a - MX7D_PAD_SD3_CLK__SD3_CLK 0x51 - MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a - MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a - MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a - MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a - MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a - MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a - MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a - MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a - MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a - >; + pinctrl_usdhc3_100mhz: usdhc3_100mhzgrp { + fsl,pins = + <MX7D_PAD_SD3_CMD__SD3_CMD 0x5a>, + <MX7D_PAD_SD3_CLK__SD3_CLK 0x51>, + <MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a>, + <MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a>, + <MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a>, + <MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a>, + <MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a>, + <MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a>, + <MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a>, + <MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a>, + <MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a>; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { - fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5b - MX7D_PAD_SD3_CLK__SD3_CLK 0x51 - MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b - MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b - MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b - MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b - MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b - MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b - MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b - MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b - MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b - >; + pinctrl_usdhc3_200mhz: usdhc3_200mhzgrp { + fsl,pins = + <MX7D_PAD_SD3_CMD__SD3_CMD 0x5b>, + <MX7D_PAD_SD3_CLK__SD3_CLK 0x51>, + <MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b>, + <MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b>, + <MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b>, + <MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b>, + <MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b>, + <MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b>, + <MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b>, + <MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b>, + <MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b>; }; }; &iomuxc_lpsr { pinctrl_wdog1: wdog1grp { - fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30 - >; + fsl,pins = + <MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30>; }; }; @@ -265,10 +269,6 @@ }; }; -&sdma { - status = "okay"; -}; - &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -278,6 +278,8 @@ assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; + no-sd; + no-sdio; vmmc-supply = <&vgen4_reg>; vqmmc-supply = <&sw2_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts index 32bf9fa9d0..0443faa3df 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts @@ -21,8 +21,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; phy-supply = <®_fec2_pwdn>; phy-handle = <ðphy2_0>; fsl,magic-packet; @@ -35,59 +33,85 @@ ethphy2_0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2_phy>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <500>; }; }; }; +&gpio2 { + pcie-dis-hog { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "pcie-dis"; + }; + + pcie-rst-hog { + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "pcie-rst"; + }; +}; + &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog_mba7_1>; + pinctrl-0 = <&pinctrl_hog_mba7_1>, <&pinctrl_hog_pcie>; pinctrl_enet2: enet2grp { - fsl,pins = < - MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x02 - MX7D_PAD_SD2_WP__ENET2_MDC 0x00 - MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x71 - MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x71 - MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x71 - MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x71 - MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x71 - MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x71 - MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x79 - MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x79 - MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x79 - MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x79 - MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x79 - MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x79 + fsl,pins = + <MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x02>, + <MX7D_PAD_SD2_WP__ENET2_MDC 0x00>, + <MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x71>, + <MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x71>, + <MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x71>, + <MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x71>, + <MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x71>, + <MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x71>, + <MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x79>, + <MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x79>, + <MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x79>, + <MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x79>, + <MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x79>, + <MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x79>; + }; + + pinctrl_enet2_phy: enet2phygrp { + fsl,pins = /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */ - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x40000070 + <MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x40000070>, /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */ - MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x40000078 - >; + <MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x40000078>; }; - pinctrl_pcie: pciegrp { - fsl,pins = < - /* #pcie_wake */ - MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x70 + pinctrl_hog_pcie: hogpciegrp { + fsl,pins = /* #pcie_rst */ - MX7D_PAD_SD2_CLK__GPIO5_IO12 0x70 + <MX7D_PAD_SD2_CLK__GPIO5_IO12 0x70>, /* #pcie_dis */ - MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x70 - >; + <MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x70>; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = + /* #pcie_wake */ + <MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x70>; }; }; &iomuxc_lpsr { pinctrl_usbotg2: usbotg2grp { - fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c - MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 - >; + fsl,pins = + <MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c>, + <MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59>; }; }; @@ -98,16 +122,14 @@ /* probe deferral not supported */ /* pcie-bus-supply = <®_mpcie_1v5>; */ reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; - status = "okay"; + status = "disabled"; }; &usbotg2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg2>; vbus-supply = <®_usb_otg2_vbus>; - srp-disable; - hnp-disable; - adp-disable; + disable-over-current; dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi index d471cc5efa..e86998ca77 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi +++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi @@ -808,7 +808,9 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; }; pcie@3400000 { diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts index 9ebb7371e2..330d3aff6b 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts @@ -198,7 +198,7 @@ clocks = <&saif0>; }; - at24@51 { + eeprom@51 { compatible = "atmel,24c32"; pagesize = <32>; reg = <0x51>; |