diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi | 818 |
1 files changed, 818 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi new file mode 100644 index 0000000000..b5443fd5b4 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi @@ -0,0 +1,818 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "pma8084.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart1; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC2 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-home { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; + }; + + i2c_led_gpio: i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_gpioex_pins>; + + i2c-gpio,delay-us = <2>; + + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + }; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_pins_active>; + pinctrl-1 = <&blsp2_uart2_pins_sleep>; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&tlmm>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + status = "okay"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + + vddio-supply = <&pma8084_l12>; +}; + +&pma8084_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + }; + + touchkey_pin: touchkey-int-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + touch_pin: touchscreen-int-state { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + panel_en_pin: panel-en-state { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + wlan_sleep_clk_pin: wlan-sleep-clk-state { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; + + panel_rst_pin: panel-rst-state { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + fuelgauge_pin: fuelgauge-int-state { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; +}; + +&remoteproc_adsp { + status = "okay"; + cx-supply = <&pma8084_s2>; +}; + +&remoteproc_mss { + status = "okay"; + cx-supply = <&pma8084_s2>; + mss-supply = <&pma8084_s6>; + mx-supply = <&pma8084_s1>; + pll-supply = <&pma8084_l12>; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pma8084-regulators"; + + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + /* + * Allow all klte* variants to load the same NVRAM file, + * as they have little difference in the WiFi part. + */ + brcm,board-type = "samsung,klte"; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; +}; + +&sdhc_3 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + /* + * cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>; + /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ +}; + +&tlmm { + /* This seems suspicious, but somebody with this device should look into it. */ + blsp2_uart2_pins_active: blsp2-uart2-pins-active-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart8"; + drive-strength = <8>; + bias-disable; + }; + + blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + bt_pins: bt-pins-state { + hostwake-pins { + pins = "gpio75"; + function = "gpio"; + drive-strength = <16>; + }; + + devwake-pins { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + }; + }; + + sdc1_on: sdhc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdc3_on: sdc3-on-state { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + + sdhc3_cd_pin: sdc3-cd-on-state { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_on: sdhc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c_touchkey_pins: i2c-touchkey-state { + pins = "gpio95", "gpio96"; + function = "gpio"; + bias-pull-up; + }; + + i2c_led_gpioex_pins: i2c-led-gpioex-state { + function = "gpio"; + bias-pull-down; + }; + + gpioex_pin: gpioex-state { + pins = "gpio145"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + wifi_pin: wifi-state { + pins = "gpio92"; + function = "gpio"; + bias-pull-down; + }; + + panel_te_pin: panel-state { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; +}; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; |