1 files changed, 427 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c
new file mode 100644
index 0000000000..9f9717874d
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// Common Codes for S3C64XX machines
+
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/io.h>
+#include <linux/clk/samsung.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/irqchip/arm-vic.h>
+#include <clocksource/samsung_pwm.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include "map.h"
+#include "irqs.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "gpio-cfg.h"
+#include "pwm-core.h"
+#include "regs-irqtype.h"
+#include "s3c64xx.h"
+#include "irq-uart-s3c64xx.h"
+
+/* External clock frequency */
+static unsigned long xtal_f __ro_after_init = 12000000;
+static unsigned long xusbxti_f __ro_after_init = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+	xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+	xusbxti_f = freq;
+}
+
+/* uart registration process */
+
+static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* table of supported CPUs */
+
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= S3C6410_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
+		.map_io		= s3c6410_map_io,
+		.init_uarts	= s3c64xx_init_uarts,
+		.init		= s3c6410_init,
+		.name		= name_s3c6410,
+	},
+};
+
+/* minimal IO mapping */
+
+/*
+ * note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_MEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct bus_type s3c64xx_subsys = {
+	.name		= "s3c64xx-core",
+	.dev_name	= "s3c64xx-core",
+};
+
+static struct device s3c64xx_dev = {
+	.bus	= &s3c64xx_subsys,
+};
+
+static struct samsung_pwm_variant s3c64xx_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
+};
+
+void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+				     enum s3c64xx_timer_mode source)
+{
+	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init s3c64xx_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s3c64xx_pwm_variant);
+}
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+	iotable_init(mach_desc, size);
+
+	/* detect cpu id */
+	s3c64xx_init_cpu();
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
+}
+
+static __init int s3c64xx_dev_init(void)
+{
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
+		return 0;
+
+	subsys_system_register(&s3c64xx_subsys, NULL);
+	return device_register(&s3c64xx_dev);
+}
+core_initcall(s3c64xx_dev_init);
+
+/*
+ * setup the sources the vic should advertise resume
+ * for, even though it is not doing the wake
+ * (set_irq_wake needs to be valid)
+ */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_PENDN - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
+
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
+}
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq)	((u32)(1 << eint_offset(irq)))
+
+static inline void s3c_irq_eint_mask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask |= (u32)data->chip_data;
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask &= ~((u32)data->chip_data);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(struct irq_data *data)
+{
+	__raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(struct irq_data *data)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(data);
+	s3c_irq_eint_ack(data);
+}
+
+static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = eint_offset(data->irq);
+	int pin, pin_val;
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+	void __iomem *reg;
+
+	if (offs > 27)
+		return -EINVAL;
+
+	if (offs <= 15)
+		reg = S3C64XX_EINT0CON0;
+	else
+		reg = S3C64XX_EINT0CON1;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -1;
+	}
+
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(reg);
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, reg);
+
+	/* set the GPIO pin appropriately */
+
+	if (offs < 16) {
+		pin = S3C64XX_GPN(offs);
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
+		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
+
+	s3c_gpio_cfgpin(pin, pin_val);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "s3c-eint",
+	.irq_mask	= s3c_irq_eint_mask,
+	.irq_unmask	= s3c_irq_eint_unmask,
+	.irq_mask_ack	= s3c_irq_eint_maskack,
+	.irq_ack	= s3c_irq_eint_ack,
+	.irq_set_type	= s3c_irq_eint_set_type,
+	.irq_set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S3C64XX_EINT0PEND);
+	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint0_3(struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(20, 27);
+}
+
+static int __init s3c64xx_init_irq_eint(void)
+{
+	int irq;
+
+	/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
+		return -ENODEV;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+		irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
+		irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
+		irq_clear_status_flags(irq, IRQ_NOREQUEST);
+	}
+
+	irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+	irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+	irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+	irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+	return 0;
+}
+arch_initcall(s3c64xx_init_irq_eint);
+
+#ifndef CONFIG_COMPILE_TEST
+#pragma message "The platform is deprecated and scheduled for removal. " \
+		"Please reach to the maintainers of the platform " \
+		"and linux-samsung-soc@vger.kernel.org if you still use it." \
+		"Without such feedback, the platform will be removed after 2024."
+#endif