diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-a1.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 369 |
1 files changed, 357 insertions, 12 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index 96225c4211..648e7f4942 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -3,9 +3,13 @@ * Copyright (c) 2019 Amlogic, Inc. All rights reserved. */ -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/amlogic,a1-pll-clkc.h> +#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h> #include <dt-bindings/gpio/meson-a1-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/meson-a1-power.h> +#include <dt-bindings/reset/amlogic,meson-a1-reset.h> / { compatible = "amlogic,a1"; @@ -41,6 +45,15 @@ }; }; + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc_periphs CLKID_OTP>; + #address-cells = <1>; + #size-cells = <1>; + secure-monitor = <&sm>; + power-domains = <&pwrc PWRC_OTP_ID>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -66,7 +79,6 @@ pwrc: power-controller { compatible = "amlogic,meson-a1-pwrc"; #power-domain-cells = <1>; - status = "okay"; }; }; @@ -76,6 +88,16 @@ #size-cells = <2>; ranges; + spifc: spi@fd000400 { + compatible = "amlogic,a1-spifc"; + reg = <0x0 0xfd000400 0x0 0x290>; + clocks = <&clkc_periphs CLKID_SPIFC>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&pwrc PWRC_SPIFC_ID>; + status = "disabled"; + }; + apb: bus@fe000000 { compatible = "simple-bus"; reg = <0x0 0xfe000000 0x0 0x1000000>; @@ -83,7 +105,6 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; - reset: reset-controller@0 { compatible = "amlogic,meson-a1-reset"; reg = <0x0 0x0 0x0 0x8c>; @@ -105,6 +126,196 @@ gpio-ranges = <&periphs_pinctrl 0 0 62>; }; + i2c0_f11_pins: i2c0-f11 { + mux { + groups = "i2c0_sck_f11", + "i2c0_sda_f12"; + function = "i2c0"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_f9_pins: i2c0-f9 { + mux { + groups = "i2c0_sck_f9", + "i2c0_sda_f10"; + function = "i2c0"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_x_pins: i2c1-x { + mux { + groups = "i2c1_sck_x", + "i2c1_sda_x"; + function = "i2c1"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_a_pins: i2c1-a { + mux { + groups = "i2c1_sck_a", + "i2c1_sda_a"; + function = "i2c1"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_x0_pins: i2c2-x0 { + mux { + groups = "i2c2_sck_x0", + "i2c2_sda_x1"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_x15_pins: i2c2-x15 { + mux { + groups = "i2c2_sck_x15", + "i2c2_sda_x16"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_a4_pins: i2c2-a4 { + mux { + groups = "i2c2_sck_a4", + "i2c2_sda_a5"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_a8_pins: i2c2-a8 { + mux { + groups = "i2c2_sck_a8", + "i2c2_sda_a9"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_x_pins: i2c3-x { + mux { + groups = "i2c3_sck_x", + "i2c3_sda_x"; + function = "i2c3"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_f_pins: i2c3-f { + mux { + groups = "i2c3_sck_f", + "i2c3_sda_f"; + function = "i2c3"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + uart_a_pins: uart-a { + mux { + groups = "uart_a_tx", + "uart_a_rx"; + function = "uart_a"; + }; + }; + + uart_a_cts_rts_pins: uart-a-cts-rts { + mux { + groups = "uart_a_cts", + "uart_a_rts"; + function = "uart_a"; + bias-pull-down; + }; + }; + + sdio_pins: sdio { + mux0 { + groups = "sdcard_d0_x", + "sdcard_d1_x", + "sdcard_d2_x", + "sdcard_d3_x", + "sdcard_cmd_x"; + function = "sdcard"; + bias-pull-up; + }; + + mux1 { + groups = "sdcard_clk_x"; + function = "sdcard"; + bias-disable; + }; + }; + + sdio_clk_gate_pins: sdio-clk-gate { + mux { + groups = "sdcard_clk_x"; + function = "sdcard"; + bias-pull-down; + }; + }; + + spifc_pins: spifc { + mux { + groups = "spif_mo", + "spif_mi", + "spif_clk", + "spif_cs", + "spif_hold_n", + "spif_wp_n"; + function = "spif"; + }; + }; + }; + + gpio_intc: interrupt-controller@440 { + compatible = "amlogic,meson-a1-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x0440 0x0 0x14>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <49 50 51 52 53 54 55 56>; + }; + + clkc_periphs: clock-controller@800 { + compatible = "amlogic,a1-peripherals-clkc"; + reg = <0 0x800 0 0x104>; + #clock-cells = <1>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div3", + "fclk_div5", "fclk_div7", + "hifi_pll", "xtal"; + }; + + i2c0: i2c@1400 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1400 0x0 0x20>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + power-domains = <&pwrc PWRC_I2C_ID>; }; uart_AO: serial@1c00 { @@ -127,14 +338,148 @@ status = "disabled"; }; - gpio_intc: interrupt-controller@0440 { - compatible = "amlogic,meson-a1-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0x0440 0x0 0x14>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = - <49 50 51 52 53 54 55 56>; + saradc: adc@2c00 { + compatible = "amlogic,meson-g12a-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x2c00 0x0 0x48>; + #io-channel-cells = <1>; + power-domains = <&pwrc PWRC_I2C_ID>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_periphs CLKID_SARADC_EN>, + <&clkc_periphs CLKID_SARADC>, + <&clkc_periphs CLKID_SARADC_SEL>; + clock-names = "clkin", "core", + "adc_clk", "adc_sel"; + status = "disabled"; + }; + + i2c1: i2c@5c00 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x5c00 0x0 0x20>; + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + i2c2: i2c@6800 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x6800 0x0 0x20>; + interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + i2c3: i2c@6c00 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x6c00 0x0 0x20>; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + usb2_phy1: phy@4000 { + compatible = "amlogic,a1-usb2-phy"; + clocks = <&clkc_periphs CLKID_USB_PHY_IN>; + clock-names = "xtal"; + reg = <0x0 0x4000 0x0 0x60>; + resets = <&reset RESET_USBPHY>; + reset-names = "phy"; + #phy-cells = <0>; + power-domains = <&pwrc PWRC_USB_ID>; + }; + + hwrng: rng@5118 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x5118 0x0 0x4>; + power-domains = <&pwrc PWRC_OTP_ID>; + }; + + sec_AO: ao-secure@5a20 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x5a20 0x0 0x140>; + amlogic,has-chip-id; + }; + + clkc_pll: pll-clock-controller@7c80 { + compatible = "amlogic,a1-pll-clkc"; + reg = <0 0x7c80 0 0x18c>; + #clock-cells = <1>; + clocks = <&clkc_periphs CLKID_FIXPLL_IN>, + <&clkc_periphs CLKID_HIFIPLL_IN>; + clock-names = "fixpll_in", "hifipll_in"; + }; + + sd_emmc: sd@10000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x10000 0x0 0x800>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SD_EMMC_A>, + <&clkc_periphs CLKID_SD_EMMC>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", + "clkin0", + "clkin1"; + assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_SEL2>; + assigned-clock-parents = <&xtal>; + resets = <&reset RESET_SD_EMMC_A>; + power-domains = <&pwrc PWRC_SD_EMMC_ID>; + status = "disabled"; + }; + }; + + usb: usb@fe004400 { + status = "disabled"; + compatible = "amlogic,meson-a1-usb-ctrl"; + reg = <0x0 0xfe004400 0x0 0xa0>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc_periphs CLKID_USB_CTRL>, + <&clkc_periphs CLKID_USB_BUS>, + <&clkc_periphs CLKID_USB_CTRL_IN>; + clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl"; + resets = <&reset RESET_USBCTRL>; + reset-name = "usb_ctrl"; + + dr_mode = "otg"; + + phys = <&usb2_phy1>; + phy-names = "usb2-phy1"; + + dwc3: usb@ff400000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff400000 0x0 0x100000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,parkmode-disable-ss-quirk; + }; + + dwc2: usb@ff500000 { + compatible = "amlogic,meson-a1-usb", "snps,dwc2"; + reg = <0x0 0xff500000 0x0 0x40000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + clocks = <&clkc_periphs CLKID_USB_PHY>; + clock-names = "otg"; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; }; }; |