diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8939.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8939.dtsi | 93 |
1 files changed, 81 insertions, 12 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index f9b6122e65..82d85ff610 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8939.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> / { @@ -601,9 +602,6 @@ bimc: interconnect@400000 { compatible = "qcom,msm8939-bimc"; reg = <0x00400000 0x62000>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; #interconnect-cells = <1>; }; @@ -647,25 +645,16 @@ pcnoc: interconnect@500000 { compatible = "qcom,msm8939-pcnoc"; reg = <0x00500000 0x11000>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_PCNOC_A_CLK>; #interconnect-cells = <1>; }; snoc: interconnect@580000 { compatible = "qcom,msm8939-snoc"; reg = <0x00580000 0x14080>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; #interconnect-cells = <1>; snoc_mm: interconnect-snoc { compatible = "qcom,msm8939-snoc-mm"; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>, - <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>; #interconnect-cells = <1>; }; }; @@ -1537,6 +1526,20 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + mpss: remoteproc@4080000 { compatible = "qcom,msm8916-mss-pil"; reg = <0x04080000 0x100>, <0x04020000 0x040>; @@ -1569,6 +1572,22 @@ qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; status = "disabled"; + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&hexagon_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + mba { memory-region = <&mba_mem>; }; @@ -1585,6 +1604,54 @@ qcom,remote-pid = <1>; label = "hexagon"; + + apr: apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + q6core: service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; }; }; @@ -2117,6 +2184,8 @@ #address-cells = <1>; #size-cells = <1>; ranges; + /* Necessary because firmware does not configure this correctly */ + clock-frequency = <19200000>; frame@b121000 { reg = <0x0b121000 0x1000>, |