summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8150-hdk.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/sm8150-hdk.dts252
1 files changed, 246 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index f4c6e1309a..de670b407e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -7,6 +7,7 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/usb/pd.h>
#include "sm8150.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
@@ -54,6 +55,17 @@
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
};
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&lt9611_out>;
+ };
+ };
+ };
};
&apps_rsc {
@@ -363,15 +375,210 @@
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
&gpu {
- /*
- * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
- * after display support is added on this board.
- */
- compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
status = "okay";
};
+&i2c4 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ typec-mux@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+
+ interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc-supply = <&vreg_bob>;
+ mode-switch;
+ orientation-switch;
+
+ port {
+ fsa4480_sbu_mux: endpoint {
+ remote-endpoint = <&pm8150b_typec_sbu_out>;
+ };
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ lt9611_codec: hdmi-bridge@3b {
+ compatible = "lontium,lt9611";
+ reg = <0x3b>;
+ #sound-dai-cells = <1>;
+
+ interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_s4a_1p8>;
+ vcc-supply = <&vreg_bob>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lt9611_irq_pin>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lt9611_a: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lt9611_b: endpoint {
+ remote-endpoint = <&mdss_dsi1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lt9611_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp {
+ status = "okay";
+};
+
+&mdss_dp_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss_dsi0 {
+ status = "okay";
+ vdda-supply = <&vreg_l3c_1p2>;
+
+ qcom,dual-dsi-mode;
+ qcom,master-dsi;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&lt9611_a>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vreg_l5a_0p875>;
+};
+
+&mdss_dsi1 {
+ vdda-supply = <&vreg_l3c_1p2>;
+
+ qcom,dual-dsi-mode;
+
+ /* DSI1 is slave, so use DSI0 clocks */
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+ status = "okay";
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&lt9611_b>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&mdss_dsi1_phy {
+ vdds-supply = <&vreg_l5a_0p875>;
+ status = "okay";
+};
+
+&pm8150b_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
+ status = "okay";
+};
+
+&pm8150b_typec {
+ status = "okay";
+
+ vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "source";
+ data-role = "dual";
+ self-powered;
+
+ source-pdos = <PDO_FIXED(5000, 3000,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)>;
+
+ altmodes {
+ displayport {
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0x00001c46>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pm8150b_role_switch_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pm8150b_typec_mux_in: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pm8150b_typec_sbu_out: endpoint {
+ remote-endpoint = <&fsa4480_sbu_mux>;
+ };
+ };
+ };
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
@@ -382,6 +589,10 @@
linux,code = <KEY_VOLUMEDOWN>;
};
+&qupv3_id_0 {
+ status = "okay";
+};
+
&qupv3_id_1 {
status = "okay";
};
@@ -406,6 +617,13 @@
&tlmm {
gpio-reserved-ranges = <0 4>, <126 4>;
+
+ lt9611_irq_pin: lt9611-irq-state {
+ pins = "gpio9";
+ function = "gpio";
+ bias-disable;
+ };
+
};
&uart2 {
@@ -450,6 +668,19 @@
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
vdda-pll-supply = <&vreg_l18a_0p8>;
+ orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+ remote-endpoint = <&mdss_dp_out>;
+};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pm8150b_typec_mux_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+ remote-endpoint = <&usb_1_dwc3_ss>;
};
&usb_2_qmpphy {
@@ -467,7 +698,16 @@
};
&usb_1_dwc3 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
+&usb_1_dwc3_ss {
+ remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
};
&usb_2_dwc3 {